]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blame - drivers/phy/hisilicon/phy-hisi-inno-usb2.c
UBUNTU: SAUCE: vmd: fixup bridge ASPM by driver name instead
[mirror_ubuntu-jammy-kernel.git] / drivers / phy / hisilicon / phy-hisi-inno-usb2.c
CommitLineData
1ccea77e 1// SPDX-License-Identifier: GPL-2.0-or-later
ba8b0ee8
PL
2/*
3 * HiSilicon INNO USB2 PHY Driver.
4 *
5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
ba8b0ee8
PL
6 */
7
8#include <linux/clk.h>
9#include <linux/delay.h>
10#include <linux/io.h>
11#include <linux/module.h>
12#include <linux/platform_device.h>
13#include <linux/phy/phy.h>
14#include <linux/reset.h>
15
16#define INNO_PHY_PORT_NUM 2
17#define REF_CLK_STABLE_TIME 100 /* unit:us */
18#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
19#define TEST_CLK_STABLE_TIME 2 /* unit:ms */
20#define PHY_CLK_STABLE_TIME 2 /* unit:ms */
21#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */
22#define POR_RST_COMPLETE_TIME 300 /* unit:us */
23#define PHY_TEST_DATA GENMASK(7, 0)
24#define PHY_TEST_ADDR GENMASK(15, 8)
25#define PHY_TEST_PORT GENMASK(18, 16)
26#define PHY_TEST_WREN BIT(21)
27#define PHY_TEST_CLK BIT(22) /* rising edge active */
28#define PHY_TEST_RST BIT(23) /* low active */
29#define PHY_CLK_ENABLE BIT(2)
30
31struct hisi_inno_phy_port {
32 struct reset_control *utmi_rst;
33 struct hisi_inno_phy_priv *priv;
34};
35
36struct hisi_inno_phy_priv {
37 void __iomem *mmio;
38 struct clk *ref_clk;
39 struct reset_control *por_rst;
40 struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
41};
42
43static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
44 u8 port, u32 addr, u32 data)
45{
46 void __iomem *reg = priv->mmio;
47 u32 val;
48
49 val = (data & PHY_TEST_DATA) |
50 ((addr << 8) & PHY_TEST_ADDR) |
51 ((port << 16) & PHY_TEST_PORT) |
52 PHY_TEST_WREN | PHY_TEST_RST;
53 writel(val, reg);
54
55 val |= PHY_TEST_CLK;
56 writel(val, reg);
57
58 val &= ~PHY_TEST_CLK;
59 writel(val, reg);
60}
61
62static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
63{
64 /* The phy clk is controlled by the port0 register 0x06. */
65 hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
66 msleep(PHY_CLK_STABLE_TIME);
67}
68
69static int hisi_inno_phy_init(struct phy *phy)
70{
71 struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
72 struct hisi_inno_phy_priv *priv = port->priv;
73 int ret;
74
75 ret = clk_prepare_enable(priv->ref_clk);
76 if (ret)
77 return ret;
78 udelay(REF_CLK_STABLE_TIME);
79
80 reset_control_deassert(priv->por_rst);
81 udelay(POR_RST_COMPLETE_TIME);
82
83 /* Set up phy registers */
84 hisi_inno_phy_setup(priv);
85
86 reset_control_deassert(port->utmi_rst);
87 udelay(UTMI_RST_COMPLETE_TIME);
88
89 return 0;
90}
91
92static int hisi_inno_phy_exit(struct phy *phy)
93{
94 struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
95 struct hisi_inno_phy_priv *priv = port->priv;
96
97 reset_control_assert(port->utmi_rst);
98 reset_control_assert(priv->por_rst);
99 clk_disable_unprepare(priv->ref_clk);
100
101 return 0;
102}
103
104static const struct phy_ops hisi_inno_phy_ops = {
105 .init = hisi_inno_phy_init,
106 .exit = hisi_inno_phy_exit,
107 .owner = THIS_MODULE,
108};
109
110static int hisi_inno_phy_probe(struct platform_device *pdev)
111{
112 struct device *dev = &pdev->dev;
113 struct device_node *np = dev->of_node;
114 struct hisi_inno_phy_priv *priv;
115 struct phy_provider *provider;
116 struct device_node *child;
ba8b0ee8
PL
117 int i = 0;
118 int ret;
119
120 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
121 if (!priv)
122 return -ENOMEM;
123
fa093440 124 priv->mmio = devm_platform_ioremap_resource(pdev, 0);
ba8b0ee8
PL
125 if (IS_ERR(priv->mmio)) {
126 ret = PTR_ERR(priv->mmio);
127 return ret;
128 }
129
130 priv->ref_clk = devm_clk_get(dev, NULL);
131 if (IS_ERR(priv->ref_clk))
132 return PTR_ERR(priv->ref_clk);
133
134 priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
135 if (IS_ERR(priv->por_rst))
136 return PTR_ERR(priv->por_rst);
137
138 for_each_child_of_node(np, child) {
139 struct reset_control *rst;
140 struct phy *phy;
141
142 rst = of_reset_control_get_exclusive(child, NULL);
143 if (IS_ERR(rst))
144 return PTR_ERR(rst);
145 priv->ports[i].utmi_rst = rst;
146 priv->ports[i].priv = priv;
147
148 phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
149 if (IS_ERR(phy))
150 return PTR_ERR(phy);
151
152 phy_set_bus_width(phy, 8);
153 phy_set_drvdata(phy, &priv->ports[i]);
154 i++;
155
156 if (i > INNO_PHY_PORT_NUM) {
157 dev_warn(dev, "Support %d ports in maximum\n", i);
158 break;
159 }
160 }
161
162 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
163 return PTR_ERR_OR_ZERO(provider);
164}
165
166static const struct of_device_id hisi_inno_phy_of_match[] = {
167 { .compatible = "hisilicon,inno-usb2-phy", },
168 { .compatible = "hisilicon,hi3798cv200-usb2-phy", },
169 { },
170};
171MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
172
173static struct platform_driver hisi_inno_phy_driver = {
174 .probe = hisi_inno_phy_probe,
175 .driver = {
176 .name = "hisi-inno-phy",
177 .of_match_table = hisi_inno_phy_of_match,
178 }
179};
180module_platform_driver(hisi_inno_phy_driver);
181
182MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver");
183MODULE_LICENSE("GPL v2");