]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blame - drivers/pinctrl/ti/pinctrl-ti-iodelay.c
Merge branch '9p-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[mirror_ubuntu-bionic-kernel.git] / drivers / pinctrl / ti / pinctrl-ti-iodelay.c
CommitLineData
003910eb
NM
1/*
2 * Support for configuration of IO Delay module found on Texas Instruments SoCs
3 * such as DRA7
4 *
5 * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
6 *
7 * This file is licensed under the terms of the GNU General Public
8 * License version 2. This program is licensed "as is" without any
9 * warranty of any kind, whether express or implied.
10 */
11
12#include <linux/err.h>
13#include <linux/init.h>
14#include <linux/io.h>
15#include <linux/module.h>
16#include <linux/of.h>
17#include <linux/of_device.h>
18#include <linux/pinctrl/pinconf.h>
19#include <linux/pinctrl/pinconf-generic.h>
20#include <linux/pinctrl/pinctrl.h>
21#include <linux/regmap.h>
22#include <linux/slab.h>
23
24#include "../core.h"
25#include "../devicetree.h"
26
27#define DRIVER_NAME "ti-iodelay"
28
29/**
30 * struct ti_iodelay_reg_data - Describes the registers for the iodelay instance
31 * @signature_mask: CONFIG_REG mask for the signature bits (see TRM)
32 * @signature_value: CONFIG_REG signature value to be written (see TRM)
33 * @lock_mask: CONFIG_REG mask for the lock bits (see TRM)
34 * @lock_val: CONFIG_REG lock value for the lock bits (see TRM)
35 * @unlock_val:CONFIG_REG unlock value for the lock bits (see TRM)
36 * @binary_data_coarse_mask: CONFIG_REG coarse mask (see TRM)
37 * @binary_data_fine_mask: CONFIG_REG fine mask (see TRM)
38 * @reg_refclk_offset: Refclk register offset
39 * @refclk_period_mask: Refclk mask
40 * @reg_coarse_offset: Coarse register configuration offset
41 * @coarse_delay_count_mask: Coarse delay count mask
42 * @coarse_ref_count_mask: Coarse ref count mask
43 * @reg_fine_offset: Fine register configuration offset
44 * @fine_delay_count_mask: Fine delay count mask
45 * @fine_ref_count_mask: Fine ref count mask
46 * @reg_global_lock_offset: Global iodelay module lock register offset
47 * @global_lock_mask: Lock mask
48 * @global_unlock_val: Unlock value
49 * @global_lock_val: Lock value
50 * @reg_start_offset: Offset to iodelay registers after the CONFIG_REG_0 to 8
51 * @reg_nr_per_pin: Number of iodelay registers for each pin
52 * @regmap_config: Regmap configuration for the IODelay region
53 */
54struct ti_iodelay_reg_data {
55 u32 signature_mask;
56 u32 signature_value;
57 u32 lock_mask;
58 u32 lock_val;
59 u32 unlock_val;
60 u32 binary_data_coarse_mask;
61 u32 binary_data_fine_mask;
62
63 u32 reg_refclk_offset;
64 u32 refclk_period_mask;
65
66 u32 reg_coarse_offset;
67 u32 coarse_delay_count_mask;
68 u32 coarse_ref_count_mask;
69
70 u32 reg_fine_offset;
71 u32 fine_delay_count_mask;
72 u32 fine_ref_count_mask;
73
74 u32 reg_global_lock_offset;
75 u32 global_lock_mask;
76 u32 global_unlock_val;
77 u32 global_lock_val;
78
79 u32 reg_start_offset;
80 u32 reg_nr_per_pin;
81
82 struct regmap_config *regmap_config;
83};
84
85/**
86 * struct ti_iodelay_reg_values - Computed io_reg configuration values (see TRM)
87 * @coarse_ref_count: Coarse reference count
88 * @coarse_delay_count: Coarse delay count
89 * @fine_ref_count: Fine reference count
90 * @fine_delay_count: Fine Delay count
91 * @ref_clk_period: Reference Clock period
92 * @cdpe: Coarse delay parameter
93 * @fdpe: Fine delay parameter
94 */
95struct ti_iodelay_reg_values {
96 u16 coarse_ref_count;
97 u16 coarse_delay_count;
98
99 u16 fine_ref_count;
100 u16 fine_delay_count;
101
102 u16 ref_clk_period;
103
104 u32 cdpe;
105 u32 fdpe;
106};
107
108/**
109 * struct ti_iodelay_cfg - Description of each configuration parameters
110 * @offset: Configuration register offset
111 * @a_delay: Agnostic Delay (in ps)
112 * @g_delay: Gnostic Delay (in ps)
113 */
114struct ti_iodelay_cfg {
115 u16 offset;
116 u16 a_delay;
117 u16 g_delay;
118};
119
120/**
121 * struct ti_iodelay_pingroup - Structure that describes one group
122 * @cfg: configuration array for the pin (from dt)
123 * @ncfg: number of configuration values allocated
124 * @config: pinconf "Config" - currently a dummy value
125 */
126struct ti_iodelay_pingroup {
127 struct ti_iodelay_cfg *cfg;
128 int ncfg;
129 unsigned long config;
130};
131
132/**
133 * struct ti_iodelay_device - Represents information for a iodelay instance
134 * @dev: Device pointer
135 * @phys_base: Physical address base of the iodelay device
136 * @reg_base: Virtual address base of the iodelay device
137 * @regmap: Regmap for this iodelay instance
138 * @pctl: Pinctrl device
139 * @desc: pinctrl descriptor for pctl
140 * @pa: pinctrl pin wise description
141 * @reg_data: Register definition data for the IODelay instance
142 * @reg_init_conf_values: Initial configuration values.
143 */
144struct ti_iodelay_device {
145 struct device *dev;
146 unsigned long phys_base;
147 void __iomem *reg_base;
148 struct regmap *regmap;
149
150 struct pinctrl_dev *pctl;
151 struct pinctrl_desc desc;
152 struct pinctrl_pin_desc *pa;
153
154 const struct ti_iodelay_reg_data *reg_data;
155 struct ti_iodelay_reg_values reg_init_conf_values;
156};
157
158/**
159 * ti_iodelay_extract() - extract bits for a field
160 * @val: Register value
161 * @mask: Mask
162 *
163 * Return: extracted value which is appropriately shifted
164 */
165static inline u32 ti_iodelay_extract(u32 val, u32 mask)
166{
167 return (val & mask) >> __ffs(mask);
168}
169
170/**
171 * ti_iodelay_compute_dpe() - Compute equation for delay parameter
172 * @period: Period to use
173 * @ref: Reference Count
174 * @delay: Delay count
175 * @delay_m: Delay multiplier
176 *
177 * Return: Computed delay parameter
178 */
179static inline u32 ti_iodelay_compute_dpe(u16 period, u16 ref, u16 delay,
180 u16 delay_m)
181{
182 u64 m, d;
183
184 /* Handle overflow conditions */
185 m = 10 * (u64)period * (u64)ref;
186 d = 2 * (u64)delay * (u64)delay_m;
187
188 /* Truncate result back to 32 bits */
189 return div64_u64(m, d);
190}
191
192/**
193 * ti_iodelay_pinconf_set() - Configure the pin configuration
194 * @iod: iodelay device
195 * @cfg: Configuration
196 *
197 * Update the configuration register as per TRM and lockup once done.
198 * *IMPORTANT NOTE* SoC TRM does recommend doing iodelay programmation only
199 * while in Isolation. But, then, isolation also implies that every pin
200 * on the SoC (including DDR) will be isolated out. The only benefit being
201 * a glitchless configuration, However, the intent of this driver is purely
202 * to support a "glitchy" configuration where applicable.
203 *
204 * Return: 0 in case of success, else appropriate error value
205 */
206static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod,
207 struct ti_iodelay_cfg *cfg)
208{
209 const struct ti_iodelay_reg_data *reg = iod->reg_data;
210 struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values;
211 struct device *dev = iod->dev;
212 u32 g_delay_coarse, g_delay_fine;
213 u32 a_delay_coarse, a_delay_fine;
214 u32 c_elements, f_elements;
215 u32 total_delay;
216 u32 reg_mask, reg_val, tmp_val;
217 int r;
218
219 /* NOTE: Truncation is expected in all division below */
220 g_delay_coarse = cfg->g_delay / 920;
221 g_delay_fine = ((cfg->g_delay % 920) * 10) / 60;
222
223 a_delay_coarse = cfg->a_delay / ival->cdpe;
224 a_delay_fine = ((cfg->a_delay % ival->cdpe) * 10) / ival->fdpe;
225
226 c_elements = g_delay_coarse + a_delay_coarse;
227 f_elements = (g_delay_fine + a_delay_fine) / 10;
228
229 if (f_elements > 22) {
230 total_delay = c_elements * ival->cdpe + f_elements * ival->fdpe;
231 c_elements = total_delay / ival->cdpe;
232 f_elements = (total_delay % ival->cdpe) / ival->fdpe;
233 }
234
235 reg_mask = reg->signature_mask;
236 reg_val = reg->signature_value << __ffs(reg->signature_mask);
237
238 reg_mask |= reg->binary_data_coarse_mask;
239 tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask);
240 if (tmp_val & ~reg->binary_data_coarse_mask) {
241 dev_err(dev, "Masking overflow of coarse elements %08x\n",
242 tmp_val);
243 tmp_val &= reg->binary_data_coarse_mask;
244 }
245 reg_val |= tmp_val;
246
247 reg_mask |= reg->binary_data_fine_mask;
248 tmp_val = f_elements << __ffs(reg->binary_data_fine_mask);
249 if (tmp_val & ~reg->binary_data_fine_mask) {
250 dev_err(dev, "Masking overflow of fine elements %08x\n",
251 tmp_val);
252 tmp_val &= reg->binary_data_fine_mask;
253 }
254 reg_val |= tmp_val;
255
256 /*
257 * NOTE: we leave the iodelay values unlocked - this is to work around
258 * situations such as those found with mmc mode change.
259 * However, this leaves open any unwarranted changes to padconf register
260 * impacting iodelay configuration. Use with care!
261 */
262 reg_mask |= reg->lock_mask;
263 reg_val |= reg->unlock_val << __ffs(reg->lock_mask);
264 r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val);
265
266 dev_info(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n",
267 cfg->offset, cfg->a_delay, cfg->g_delay, c_elements,
268 f_elements, reg_val);
269
270 return r;
271}
272
273/**
274 * ti_iodelay_pinconf_init_dev() - Initialize IODelay device
275 * @iod: iodelay device
276 *
277 * Unlocks the iodelay region, computes the common parameters
278 *
279 * Return: 0 in case of success, else appropriate error value
280 */
281static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod)
282{
283 const struct ti_iodelay_reg_data *reg = iod->reg_data;
284 struct device *dev = iod->dev;
285 struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values;
286 u32 val;
287 int r;
288
289 /* unlock the iodelay region */
290 r = regmap_update_bits(iod->regmap, reg->reg_global_lock_offset,
291 reg->global_lock_mask, reg->global_unlock_val);
292 if (r)
293 return r;
294
295 /* Read up Recalibration sequence done by bootloader */
296 r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val);
297 if (r)
298 return r;
299 ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask);
300 dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period);
301
302 r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val);
303 if (r)
304 return r;
305 ival->coarse_ref_count =
306 ti_iodelay_extract(val, reg->coarse_ref_count_mask);
307 ival->coarse_delay_count =
308 ti_iodelay_extract(val, reg->coarse_delay_count_mask);
309 if (!ival->coarse_delay_count) {
310 dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n",
311 val);
312 return -EINVAL;
313 }
314 ival->cdpe = ti_iodelay_compute_dpe(ival->ref_clk_period,
315 ival->coarse_ref_count,
316 ival->coarse_delay_count, 88);
317 if (!ival->cdpe) {
318 dev_err(dev, "Invalid cdpe computed params = %d %d %d\n",
319 ival->ref_clk_period, ival->coarse_ref_count,
320 ival->coarse_delay_count);
321 return -EINVAL;
322 }
323 dev_dbg(iod->dev, "coarse: ref=0x%04x delay=0x%04x cdpe=0x%08x\n",
324 ival->coarse_ref_count, ival->coarse_delay_count, ival->cdpe);
325
326 r = regmap_read(iod->regmap, reg->reg_fine_offset, &val);
327 if (r)
328 return r;
329 ival->fine_ref_count =
330 ti_iodelay_extract(val, reg->fine_ref_count_mask);
331 ival->fine_delay_count =
332 ti_iodelay_extract(val, reg->fine_delay_count_mask);
333 if (!ival->fine_delay_count) {
334 dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n",
335 val);
336 return -EINVAL;
337 }
338 ival->fdpe = ti_iodelay_compute_dpe(ival->ref_clk_period,
339 ival->fine_ref_count,
340 ival->fine_delay_count, 264);
341 if (!ival->fdpe) {
342 dev_err(dev, "Invalid fdpe(0) computed params = %d %d %d\n",
343 ival->ref_clk_period, ival->fine_ref_count,
344 ival->fine_delay_count);
345 return -EINVAL;
346 }
347 dev_dbg(iod->dev, "fine: ref=0x%04x delay=0x%04x fdpe=0x%08x\n",
348 ival->fine_ref_count, ival->fine_delay_count, ival->fdpe);
349
350 return 0;
351}
352
353/**
354 * ti_iodelay_pinconf_deinit_dev() - deinit the iodelay device
355 * @iod: IODelay device
356 *
357 * Deinitialize the IODelay device (basically just lock the region back up.
358 */
359static void ti_iodelay_pinconf_deinit_dev(struct ti_iodelay_device *iod)
360{
361 const struct ti_iodelay_reg_data *reg = iod->reg_data;
362
363 /* lock the iodelay region back again */
364 regmap_update_bits(iod->regmap, reg->reg_global_lock_offset,
365 reg->global_lock_mask, reg->global_lock_val);
366}
367
368/**
369 * ti_iodelay_get_pingroup() - Find the group mapped by a group selector
370 * @iod: iodelay device
371 * @selector: Group Selector
372 *
373 * Return: Corresponding group representing group selector
374 */
375static struct ti_iodelay_pingroup *
376ti_iodelay_get_pingroup(struct ti_iodelay_device *iod, unsigned int selector)
377{
378 struct group_desc *g;
379
380 g = pinctrl_generic_get_group(iod->pctl, selector);
381 if (!g) {
382 dev_err(iod->dev, "%s could not find pingroup %i\n", __func__,
383 selector);
384
385 return NULL;
386 }
387
388 return g->data;
389}
390
391/**
392 * ti_iodelay_offset_to_pin() - get a pin index based on the register offset
393 * @iod: iodelay driver instance
394 * @offset: register offset from the base
395 */
396static int ti_iodelay_offset_to_pin(struct ti_iodelay_device *iod,
397 unsigned int offset)
398{
399 const struct ti_iodelay_reg_data *r = iod->reg_data;
400 unsigned int index;
401
402 if (offset > r->regmap_config->max_register) {
403 dev_err(iod->dev, "mux offset out of range: 0x%x (0x%x)\n",
404 offset, r->regmap_config->max_register);
405 return -EINVAL;
406 }
407
408 index = (offset - r->reg_start_offset) / r->regmap_config->reg_stride;
409 index /= r->reg_nr_per_pin;
410
411 return index;
412}
413
414/**
415 * ti_iodelay_node_iterator() - Iterate iodelay node
416 * @pctldev: Pin controller driver
417 * @np: Device node
418 * @pinctrl_spec: Parsed arguments from device tree
419 * @pins: Array of pins in the pin group
420 * @pin_index: Pin index in the pin array
421 * @data: Pin controller driver specific data
422 *
423 */
424static int ti_iodelay_node_iterator(struct pinctrl_dev *pctldev,
425 struct device_node *np,
426 const struct of_phandle_args *pinctrl_spec,
427 int *pins, int pin_index, void *data)
428{
429 struct ti_iodelay_device *iod;
430 struct ti_iodelay_cfg *cfg = data;
431 const struct ti_iodelay_reg_data *r;
432 struct pinctrl_pin_desc *pd;
433 int pin;
434
435 iod = pinctrl_dev_get_drvdata(pctldev);
436 if (!iod)
437 return -EINVAL;
438
439 r = iod->reg_data;
440
441 if (pinctrl_spec->args_count < r->reg_nr_per_pin) {
442 dev_err(iod->dev, "invalid args_count for spec: %i\n",
443 pinctrl_spec->args_count);
444
445 return -EINVAL;
446 }
447
448 /* Index plus two value cells */
449 cfg[pin_index].offset = pinctrl_spec->args[0];
450 cfg[pin_index].a_delay = pinctrl_spec->args[1] & 0xffff;
451 cfg[pin_index].g_delay = pinctrl_spec->args[2] & 0xffff;
452
453 pin = ti_iodelay_offset_to_pin(iod, cfg[pin_index].offset);
454 if (pin < 0) {
455 dev_err(iod->dev, "could not add functions for %s %ux\n",
456 np->name, cfg[pin_index].offset);
457 return -ENODEV;
458 }
459 pins[pin_index] = pin;
460
461 pd = &iod->pa[pin];
462 pd->drv_data = &cfg[pin_index];
463
464 dev_dbg(iod->dev, "%s offset=%x a_delay = %d g_delay = %d\n",
465 np->name, cfg[pin_index].offset, cfg[pin_index].a_delay,
466 cfg[pin_index].g_delay);
467
468 return 0;
469}
470
471/**
472 * ti_iodelay_dt_node_to_map() - Map a device tree node to appropriate group
473 * @pctldev: pinctrl device representing IODelay device
474 * @np: Node Pointer (device tree)
475 * @map: Pinctrl Map returned back to pinctrl framework
476 * @num_maps: Number of maps (1)
477 *
478 * Maps the device tree description into a group of configuration parameters
479 * for iodelay block entry.
480 *
481 * Return: 0 in case of success, else appropriate error value
482 */
483static int ti_iodelay_dt_node_to_map(struct pinctrl_dev *pctldev,
484 struct device_node *np,
485 struct pinctrl_map **map,
486 unsigned int *num_maps)
487{
488 struct ti_iodelay_device *iod;
489 struct ti_iodelay_cfg *cfg;
490 struct ti_iodelay_pingroup *g;
491 const char *name = "pinctrl-pin-array";
492 int rows, *pins, error = -EINVAL, i;
493
494 iod = pinctrl_dev_get_drvdata(pctldev);
495 if (!iod)
496 return -EINVAL;
497
498 rows = pinctrl_count_index_with_args(np, name);
499 if (rows == -EINVAL)
500 return rows;
501
502 *map = devm_kzalloc(iod->dev, sizeof(**map), GFP_KERNEL);
503 if (!*map)
504 return -ENOMEM;
505 *num_maps = 0;
506
507 g = devm_kzalloc(iod->dev, sizeof(*g), GFP_KERNEL);
508 if (!g) {
509 error = -ENOMEM;
510 goto free_map;
511 }
512
513 pins = devm_kzalloc(iod->dev, sizeof(*pins) * rows, GFP_KERNEL);
514 if (!pins)
515 goto free_group;
516
517 cfg = devm_kzalloc(iod->dev, sizeof(*cfg) * rows, GFP_KERNEL);
518 if (!cfg) {
519 error = -ENOMEM;
520 goto free_pins;
521 }
522
523 for (i = 0; i < rows; i++) {
524 struct of_phandle_args pinctrl_spec;
525
526 error = pinctrl_parse_index_with_args(np, name, i,
527 &pinctrl_spec);
528 if (error)
529 goto free_data;
530
531 error = ti_iodelay_node_iterator(pctldev, np, &pinctrl_spec,
532 pins, i, cfg);
533 if (error)
534 goto free_data;
535 }
536
537 g->cfg = cfg;
538 g->ncfg = i;
539 g->config = PIN_CONFIG_END;
540
541 error = pinctrl_generic_add_group(iod->pctl, np->name, pins, i, g);
542 if (error < 0)
543 goto free_data;
544
545 (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP;
546 (*map)->data.configs.group_or_pin = np->name;
547 (*map)->data.configs.configs = &g->config;
548 (*map)->data.configs.num_configs = 1;
549 *num_maps = 1;
550
551 return 0;
552
553free_data:
554 devm_kfree(iod->dev, cfg);
555free_pins:
556 devm_kfree(iod->dev, pins);
557free_group:
558 devm_kfree(iod->dev, g);
559free_map:
560 devm_kfree(iod->dev, *map);
561
562 return error;
563}
564
565/**
566 * ti_iodelay_pinconf_group_get() - Get the group configuration
567 * @pctldev: pinctrl device representing IODelay device
568 * @selector: Group selector
569 * @config: Configuration returned
570 *
571 * Return: The configuration if the group is valid, else returns -EINVAL
572 */
573static int ti_iodelay_pinconf_group_get(struct pinctrl_dev *pctldev,
574 unsigned int selector,
575 unsigned long *config)
576{
577 struct ti_iodelay_device *iod;
003910eb
NM
578 struct ti_iodelay_pingroup *group;
579
580 iod = pinctrl_dev_get_drvdata(pctldev);
003910eb
NM
581 group = ti_iodelay_get_pingroup(iod, selector);
582
583 if (!group)
584 return -EINVAL;
585
586 *config = group->config;
587 return 0;
588}
589
590/**
591 * ti_iodelay_pinconf_group_set() - Configure the groups of pins
592 * @pctldev: pinctrl device representing IODelay device
593 * @selector: Group selector
594 * @configs: Configurations
595 * @num_configs: Number of configurations
596 *
597 * Return: 0 if all went fine, else appropriate error value.
598 */
599static int ti_iodelay_pinconf_group_set(struct pinctrl_dev *pctldev,
600 unsigned int selector,
601 unsigned long *configs,
602 unsigned int num_configs)
603{
604 struct ti_iodelay_device *iod;
605 struct device *dev;
606 struct ti_iodelay_pingroup *group;
607 int i;
608
609 iod = pinctrl_dev_get_drvdata(pctldev);
610 dev = iod->dev;
611 group = ti_iodelay_get_pingroup(iod, selector);
612
613 if (num_configs != 1) {
614 dev_err(dev, "Unsupported number of configurations %d\n",
615 num_configs);
616 return -EINVAL;
617 }
618
619 if (*configs != PIN_CONFIG_END) {
620 dev_err(dev, "Unsupported configuration\n");
621 return -EINVAL;
622 }
623
624 for (i = 0; i < group->ncfg; i++) {
625 if (ti_iodelay_pinconf_set(iod, &group->cfg[i]))
626 return -ENOTSUPP;
627 }
628
629 return 0;
630}
631
632#ifdef CONFIG_DEBUG_FS
633/**
634 * ti_iodelay_pin_to_offset() - get pin register offset based on the pin index
635 * @iod: iodelay driver instance
636 * @selector: Pin index
637 */
638static unsigned int ti_iodelay_pin_to_offset(struct ti_iodelay_device *iod,
639 unsigned int selector)
640{
641 const struct ti_iodelay_reg_data *r = iod->reg_data;
642 unsigned int offset;
643
644 offset = selector * r->regmap_config->reg_stride;
645 offset *= r->reg_nr_per_pin;
646 offset += r->reg_start_offset;
647
648 return offset;
649}
650
651static void ti_iodelay_pin_dbg_show(struct pinctrl_dev *pctldev,
652 struct seq_file *s,
653 unsigned int pin)
654{
655 struct ti_iodelay_device *iod;
656 struct pinctrl_pin_desc *pd;
657 struct ti_iodelay_cfg *cfg;
658 const struct ti_iodelay_reg_data *r;
659 unsigned long offset;
660 u32 in, oen, out;
661
662 iod = pinctrl_dev_get_drvdata(pctldev);
663 r = iod->reg_data;
664
665 offset = ti_iodelay_pin_to_offset(iod, pin);
003910eb
NM
666 pd = &iod->pa[pin];
667 cfg = pd->drv_data;
668
669 regmap_read(iod->regmap, offset, &in);
670 regmap_read(iod->regmap, offset + r->regmap_config->reg_stride, &oen);
671 regmap_read(iod->regmap, offset + r->regmap_config->reg_stride * 2,
672 &out);
673
674 seq_printf(s, "%lx a: %i g: %i (%08x %08x %08x) %s ",
675 iod->phys_base + offset,
676 cfg ? cfg->a_delay : -1,
677 cfg ? cfg->g_delay : -1,
678 in, oen, out, DRIVER_NAME);
679}
680
681/**
682 * ti_iodelay_pinconf_group_dbg_show() - show the group information
683 * @pctldev: Show the group information
684 * @s: Sequence file
685 * @selector: Group selector
686 *
687 * Provide the configuration information of the selected group
688 */
689static void ti_iodelay_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
690 struct seq_file *s,
691 unsigned int selector)
692{
693 struct ti_iodelay_device *iod;
003910eb
NM
694 struct ti_iodelay_pingroup *group;
695 int i;
696
697 iod = pinctrl_dev_get_drvdata(pctldev);
003910eb
NM
698 group = ti_iodelay_get_pingroup(iod, selector);
699 if (!group)
700 return;
701
702 for (i = 0; i < group->ncfg; i++) {
703 struct ti_iodelay_cfg *cfg;
704 u32 reg = 0;
705
706 cfg = &group->cfg[i];
707 regmap_read(iod->regmap, cfg->offset, &reg),
708 seq_printf(s, "\n\t0x%08x = 0x%08x (%3d, %3d)",
709 cfg->offset, reg, cfg->a_delay,
710 cfg->g_delay);
711 }
712}
713#endif
714
a9856ef7 715static const struct pinctrl_ops ti_iodelay_pinctrl_ops = {
003910eb
NM
716 .get_groups_count = pinctrl_generic_get_group_count,
717 .get_group_name = pinctrl_generic_get_group_name,
718 .get_group_pins = pinctrl_generic_get_group_pins,
719#ifdef CONFIG_DEBUG_FS
720 .pin_dbg_show = ti_iodelay_pin_dbg_show,
721#endif
722 .dt_node_to_map = ti_iodelay_dt_node_to_map,
723};
724
a9856ef7 725static const struct pinconf_ops ti_iodelay_pinctrl_pinconf_ops = {
003910eb
NM
726 .pin_config_group_get = ti_iodelay_pinconf_group_get,
727 .pin_config_group_set = ti_iodelay_pinconf_group_set,
728#ifdef CONFIG_DEBUG_FS
729 .pin_config_group_dbg_show = ti_iodelay_pinconf_group_dbg_show,
730#endif
731};
732
733/**
734 * ti_iodelay_alloc_pins() - Allocate structures needed for pins for iodelay
735 * @dev: Device pointer
736 * @iod: iodelay device
737 * @base_phy: Base Physical Address
738 *
739 * Return: 0 if all went fine, else appropriate error value.
740 */
741static int ti_iodelay_alloc_pins(struct device *dev,
742 struct ti_iodelay_device *iod, u32 base_phy)
743{
744 const struct ti_iodelay_reg_data *r = iod->reg_data;
745 struct pinctrl_pin_desc *pin;
746 u32 phy_reg;
747 int nr_pins, i;
748
749 nr_pins = ti_iodelay_offset_to_pin(iod, r->regmap_config->max_register);
750 dev_dbg(dev, "Allocating %i pins\n", nr_pins);
751
752 iod->pa = devm_kzalloc(dev, sizeof(*iod->pa) * nr_pins, GFP_KERNEL);
753 if (!iod->pa)
754 return -ENOMEM;
755
756 iod->desc.pins = iod->pa;
757 iod->desc.npins = nr_pins;
758
759 phy_reg = r->reg_start_offset + base_phy;
760
761 for (i = 0; i < nr_pins; i++, phy_reg += 4) {
762 pin = &iod->pa[i];
763 pin->number = i;
764 }
765
766 return 0;
767}
768
769static struct regmap_config dra7_iodelay_regmap_config = {
770 .reg_bits = 32,
771 .reg_stride = 4,
772 .val_bits = 32,
773 .max_register = 0xd1c,
774};
775
776static struct ti_iodelay_reg_data dra7_iodelay_data = {
777 .signature_mask = 0x0003f000,
778 .signature_value = 0x29,
779 .lock_mask = 0x00000400,
780 .lock_val = 1,
781 .unlock_val = 0,
782 .binary_data_coarse_mask = 0x000003e0,
783 .binary_data_fine_mask = 0x0000001f,
784
785 .reg_refclk_offset = 0x14,
786 .refclk_period_mask = 0xffff,
787
788 .reg_coarse_offset = 0x18,
789 .coarse_delay_count_mask = 0xffff0000,
790 .coarse_ref_count_mask = 0x0000ffff,
791
792 .reg_fine_offset = 0x1C,
793 .fine_delay_count_mask = 0xffff0000,
794 .fine_ref_count_mask = 0x0000ffff,
795
796 .reg_global_lock_offset = 0x2c,
797 .global_lock_mask = 0x0000ffff,
798 .global_unlock_val = 0x0000aaaa,
799 .global_lock_val = 0x0000aaab,
800
801 .reg_start_offset = 0x30,
802 .reg_nr_per_pin = 3,
803 .regmap_config = &dra7_iodelay_regmap_config,
804};
805
806static const struct of_device_id ti_iodelay_of_match[] = {
807 {.compatible = "ti,dra7-iodelay", .data = &dra7_iodelay_data},
808 { /* Hopefully no more.. */ },
809};
810MODULE_DEVICE_TABLE(of, ti_iodelay_of_match);
811
812/**
813 * ti_iodelay_probe() - Standard probe
814 * @pdev: platform device
815 *
816 * Return: 0 if all went fine, else appropriate error value.
817 */
818static int ti_iodelay_probe(struct platform_device *pdev)
819{
820 struct device *dev = &pdev->dev;
821 struct device_node *np = of_node_get(dev->of_node);
822 const struct of_device_id *match;
823 struct resource *res;
824 struct ti_iodelay_device *iod;
825 int ret = 0;
826
827 if (!np) {
828 ret = -EINVAL;
829 dev_err(dev, "No OF node\n");
830 goto exit_out;
831 }
832
833 match = of_match_device(ti_iodelay_of_match, dev);
834 if (!match) {
835 ret = -EINVAL;
836 dev_err(dev, "No DATA match\n");
837 goto exit_out;
838 }
839
840 iod = devm_kzalloc(dev, sizeof(*iod), GFP_KERNEL);
841 if (!iod) {
842 ret = -ENOMEM;
843 goto exit_out;
844 }
845 iod->dev = dev;
846 iod->reg_data = match->data;
847
848 /* So far We can assume there is only 1 bank of registers */
849 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
850 if (!res) {
851 dev_err(dev, "Missing MEM resource\n");
852 ret = -ENODEV;
853 goto exit_out;
854 }
855
856 iod->phys_base = res->start;
857 iod->reg_base = devm_ioremap_resource(dev, res);
858 if (IS_ERR(iod->reg_base)) {
859 ret = PTR_ERR(iod->reg_base);
860 goto exit_out;
861 }
862
863 iod->regmap = devm_regmap_init_mmio(dev, iod->reg_base,
864 iod->reg_data->regmap_config);
865 if (IS_ERR(iod->regmap)) {
866 dev_err(dev, "Regmap MMIO init failed.\n");
867 ret = PTR_ERR(iod->regmap);
868 goto exit_out;
869 }
870
871 if (ti_iodelay_pinconf_init_dev(iod))
872 goto exit_out;
873
874 ret = ti_iodelay_alloc_pins(dev, iod, res->start);
875 if (ret)
876 goto exit_out;
877
878 iod->desc.pctlops = &ti_iodelay_pinctrl_ops;
879 /* no pinmux ops - we are pinconf */
880 iod->desc.confops = &ti_iodelay_pinctrl_pinconf_ops;
881 iod->desc.name = dev_name(dev);
882 iod->desc.owner = THIS_MODULE;
883
950b0d91
TL
884 ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl);
885 if (ret) {
003910eb 886 dev_err(dev, "Failed to register pinctrl\n");
003910eb
NM
887 goto exit_out;
888 }
889
890 platform_set_drvdata(pdev, iod);
891
61187142
TL
892 return pinctrl_enable(iod->pctl);
893
003910eb
NM
894exit_out:
895 of_node_put(np);
896 return ret;
897}
898
899/**
900 * ti_iodelay_remove() - standard remove
901 * @pdev: platform device
902 *
903 * Return: 0 if all went fine, else appropriate error value.
904 */
905static int ti_iodelay_remove(struct platform_device *pdev)
906{
907 struct ti_iodelay_device *iod = platform_get_drvdata(pdev);
908
909 if (!iod)
910 return 0;
911
912 if (iod->pctl)
913 pinctrl_unregister(iod->pctl);
914
915 ti_iodelay_pinconf_deinit_dev(iod);
916
917 /* Expect other allocations to be freed by devm */
918
919 return 0;
920}
921
922static struct platform_driver ti_iodelay_driver = {
923 .probe = ti_iodelay_probe,
924 .remove = ti_iodelay_remove,
925 .driver = {
926 .owner = THIS_MODULE,
927 .name = DRIVER_NAME,
928 .of_match_table = ti_iodelay_of_match,
929 },
930};
931module_platform_driver(ti_iodelay_driver);
932
933MODULE_AUTHOR("Texas Instruments, Inc.");
934MODULE_DESCRIPTION("Pinconf driver for TI's IO Delay module");
935MODULE_LICENSE("GPL v2");