[mirror_ubuntu-zesty-kernel.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_ACT8945A
	tristate "Active-semi ACT8945A charger driver"
	depends on MFD_ACT8945A || COMPILE_TEST
	help
	  Say Y here to enable support for power supply provided by
	  Active-semi ActivePath ACT8945A charger.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_IPAQ_MICRO
	tristate "iPAQ Atmel Micro ASIC battery driver"
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to monitor battery status on
	  Compaq/HP iPAQ h3100 and h3600.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27XXX
	tristate "BQ27xxx battery driver"
	help
	  Say Y here to enable support for batteries with BQ27xxx chips.

config BATTERY_BQ27XXX_I2C
	tristate "BQ27xxx I2C support"
	depends on BATTERY_BQ27XXX
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27xxx chips
	  connected over an I2C bus.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config CHARGER_DA9150
	tristate "Dialog Semiconductor DA9150 Charger support"
	depends on MFD_DA9150
	depends on DA9150_GPADC
	depends on IIO
	help
	  Say Y here to enable support for charger unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC.

	  This driver can also be built as a module. If so, the module will be
	  called da9150-charger.

config BATTERY_DA9150
	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	depends on MFD_DA9150
	help
	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC

	  This driver can also be built as a module. If so, the module will be
	  called da9150-fg.

config AXP288_CHARGER
	tristate "X-Powers AXP288 Charger"
	depends on MFD_AXP20X && EXTCON_AXP288
	help
	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
	  integrated charger.

config AXP288_FUEL_GAUGE
	tristate "X-Powers AXP288 Fuel Gauge"
	depends on MFD_AXP20X && IIO
	help
	  Say yes here to have support for X-Power power management IC (PMIC)
	  Fuel Gauge. The device provides battery statistics and status
	  monitoring as well as alerts for battery over/under voltage and
	  over/under temperature.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	select REGMAP_I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config BATTERY_TWL4030_MADC
	tristate "TWL4030 MADC battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable this dumb driver for batteries managed
	  through the TWL4030 MADC.

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on IIO && TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX14577
	tristate "Maxim MAX14577/77836 battery charger driver"
	depends on MFD_MAX14577
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX14577/77836 MUICs.

config CHARGER_MAX77693
	tristate "Maxim MAX77693 battery charger driver"
	depends on MFD_MAX77693
	help
	  Say Y to enable support for the Maxim MAX77693 battery charger.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_QCOM_SMBB
	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	depends on MFD_SPMI_PMIC || COMPILE_TEST
	depends on OF
	depends on EXTCON
	help
	  Say Y to include support for the Switch-Mode Battery Charger and
	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
	  is an integrated, single-cell lithium-ion battery charger.  DT
	  configuration is required for loading, see the devicetree
	  documentation for more detail.  The base name for this driver is
	  'pm8941_charger'.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_BQ24190
	tristate "TI BQ24190 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24190 battery charger.

config CHARGER_BQ24257
	tristate "TI BQ24250/24251/24257 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	depends on REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
	  chargers.

config CHARGER_BQ24735
	tristate "TI BQ24735 battery charger support"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24735 battery charger.

config CHARGER_BQ25890
	tristate "TI BQ25890 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ25890 battery charger.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config CHARGER_TPS65217
	tristate "TPS65217 battery charger driver"
	depends on MFD_TPS65217
	help
	 Say Y here to enable support for battery charging with TPS65217
	 PMIC chips.

config BATTERY_GAUGE_LTC2941
	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	depends on I2C
	help
	  Say Y here to include support for LTC2941 and LTC2943 Battery
	  Gauge IC. The driver reports the charge count continuously, and
	  measures the voltage and temperature every 10 seconds.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GOLDFISH || COMPILE_TEST
	depends on HAS_IOMEM
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

config BATTERY_RT5033
	tristate "RT5033 fuel gauge support"
	depends on MFD_RT5033
	help
	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

config CHARGER_RT9455
	tristate "Richtek RT9455 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for Richtek RT9455 battery charger.

config AXP20X_POWER
	tristate "AXP20x power supply driver"
	depends on MFD_AXP20X
	help
	  This driver provides support for the power supply features of
	  AXP20x PMIC.

endif # POWER_SUPPLY

source "drivers/power/reset/Kconfig"
source "drivers/power/avs/Kconfig"
Commit	Line	Data
4a11b59d	1	menuconfig POWER_SUPPLY
0d4ed4e2	2	bool "Power supply class support"
4a11b59d AV	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
b2998049 AV	17	config PDA_POWER
b2998049 AV	18	tristate "Generic PDA/phone power driver"
5f17c70f	19	depends on !S390
b2998049 AV	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
3788ec93 AV	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
e60fea79	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
28db3888 HZ	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
c26964ea MB	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
3961f7c3 MB	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
14431aa0 MB	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
a1e50fd4 AV	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
a830d28b JZ	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
5c0e09e0 WY	78	config BATTERY_ACT8945A
	79	tristate "Active-semi ACT8945A charger driver"
	80	depends on MFD_ACT8945A \|\| COMPILE_TEST
	81	help
	82	Say Y here to enable support for power supply provided by
	83	Active-semi ActivePath ACT8945A charger.
	84
fe0e3153 AV	85	config BATTERY_DS2760
fe0e3153 AV	86	tristate "DS2760 battery driver (HP iPAQ & others)"
f6127b86	87	depends on W1 && W1_SLAVE_DS2760
fe0e3153 AV	88	help
	89	Say Y here to enable support for batteries with ds2760 chip.
	90
275ac746 CB	91	config BATTERY_DS2780
275ac746 CB	92	tristate "DS2780 battery driver"
3369465e	93	depends on HAS_IOMEM
275ac746 CB	94	select W1
	95	select W1_SLAVE_DS2780
	96	help
	97	Say Y here to enable support for batteries with ds2780 chip.
	98
fef37e9a	99	config BATTERY_DS2781
840b91bd	100	tristate "DS2781 battery driver"
fef37e9a RS	101	depends on HAS_IOMEM
	102	select W1
	103	select W1_SLAVE_DS2781
	104	help
	105	If you enable this you will have the DS2781 battery driver support.
	106
	107	The battery monitor chip is used in many batteries/devices
	108	as the one who is responsible for charging/discharging/monitoring
	109	Li+ batteries.
	110
	111	If you are unsure, say N.
	112
bfdb46ce	113	config BATTERY_DS2782
9b9ade6b	114	tristate "DS2782/DS2786 standalone gas-gauge"
bfdb46ce RM	115	depends on I2C
bfdb46ce RM	116	help
9b9ade6b	117	Say Y here to enable support for the DS2782/DS2786 standalone battery
bfdb46ce RM	118	gas-gauge.
bfdb46ce RM	119
efea58e3 DW	120	config BATTERY_PMU
efea58e3 DW	121	tristate "Apple PMU battery"
a1da5f4f	122	depends on PPC32 && ADB_PMU
efea58e3 DW	123	help
	124	Say Y here to expose battery information on Apple machines
	125	through the generic battery class.
	126
fb972873 DW	127	config BATTERY_OLPC
	128	tristate "One Laptop Per Child battery"
	129	depends on X86_32 && OLPC
	130	help
	131	Say Y to enable support for the battery on the OLPC laptop.
	132
fece4184 DES	133	config BATTERY_TOSA
fece4184 DES	134	tristate "Sharp SL-6000 (tosa) battery"
6a903788	135	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
fece4184 DES	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-6000 (tosa) models.
	139
f1fce597 TK	140	config BATTERY_COLLIE
	141	tristate "Sharp SL-5500 (collie) battery"
	142	depends on SA1100_COLLIE && MCP_UCB1200
	143	help
	144	Say Y to enable support for the battery on the Sharp Zaurus
	145	SL-5500 (collie) models.
	146
00a588f9 DA	147	config BATTERY_IPAQ_MICRO
	148	tristate "iPAQ Atmel Micro ASIC battery driver"
	149	depends on MFD_IPAQ_MICRO
	150	help
	151	Choose this option if you want to monitor battery status on
	152	Compaq/HP iPAQ h3100 and h3600.
	153
4e9687d9 MV	154	config BATTERY_WM97XX
4e9687d9 MV	155	bool "WM97xx generic battery driver"
5e4c5f4c	156	depends on TOUCHSCREEN_WM97XX=y
d4b19c42	157	help
4e9687d9	158	Say Y to enable support for battery measured by WM97xx aux port.
d4b19c42	159
c78f2b64 RK	160	config BATTERY_SBS
c78f2b64 RK	161	tristate "SBS Compliant gas gauge"
a7640bfa RK	162	depends on I2C
a7640bfa RK	163	help
c78f2b64 RK	164	Say Y to include support for SBS battery driver for SBS-compliant
c78f2b64 RK	165	gas gauges.
a7640bfa	166
081bab21 AD	167	config BATTERY_BQ27XXX
081bab21 AD	168	tristate "BQ27xxx battery driver"
7fb7ba58	169	help
703df6c0	170	Say Y here to enable support for batteries with BQ27xxx chips.
7fb7ba58	171
081bab21	172	config BATTERY_BQ27XXX_I2C
703df6c0	173	tristate "BQ27xxx I2C support"
081bab21	174	depends on BATTERY_BQ27XXX
b996ad0e	175	depends on I2C
7fb7ba58	176	default y
b996ad0e	177	help
703df6c0 AD	178	Say Y here to enable support for batteries with BQ27xxx chips
703df6c0 AD	179	connected over an I2C bus.
7fb7ba58	180
342d765e MR	181	config BATTERY_DA9030
	182	tristate "DA9030 battery driver"
	183	depends on PMIC_DA903X
	184	help
	185	Say Y here to enable support for batteries charger integrated into
	186	DA9030 PMIC.
	187
ded7fc7b AJ	188	config BATTERY_DA9052
	189	tristate "Dialog DA9052 Battery"
	190	depends on PMIC_DA9052
	191	help
	192	Say Y here to enable support for batteries charger integrated into
	193	DA9052 PMIC.
	194
c1a281e3 AT	195	config CHARGER_DA9150
	196	tristate "Dialog Semiconductor DA9150 Charger support"
	197	depends on MFD_DA9150
	198	depends on DA9150_GPADC
	199	depends on IIO
	200	help
	201	Say Y here to enable support for charger unit of the DA9150
	202	Integrated Charger & Fuel-Gauge IC.
	203
	204	This driver can also be built as a module. If so, the module will be
	205	called da9150-charger.
	206
a419b4fd AT	207	config BATTERY_DA9150
	208	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	209	depends on MFD_DA9150
	210	help
	211	Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	212	Integrated Charger & Fuel-Gauge IC
	213
	214	This driver can also be built as a module. If so, the module will be
	215	called da9150-fg.
	216
843735b7 RP	217	config AXP288_CHARGER
	218	tristate "X-Powers AXP288 Charger"
	219	depends on MFD_AXP20X && EXTCON_AXP288
	220	help
	221	Say yes here to have support X-Power AXP288 power management IC (PMIC)
	222	integrated charger.
	223
5a5bf490 TB	224	config AXP288_FUEL_GAUGE
	225	tristate "X-Powers AXP288 Fuel Gauge"
	226	depends on MFD_AXP20X && IIO
	227	help
	228	Say yes here to have support for X-Power power management IC (PMIC)
	229	Fuel Gauge. The device provides battery statistics and status
	230	monitoring as well as alerts for battery over/under voltage and
	231	over/under temperature.
	232
c6f4a42d MK	233	config BATTERY_MAX17040
	234	tristate "Maxim MAX17040 Fuel Gauge"
	235	depends on I2C
	236	help
	237	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	238	in handheld and portable equipment. The MAX17040 is configured
	239	to operate with a single lithium cell
	240
359ab9f5	241	config BATTERY_MAX17042
9a8422d2	242	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
359ab9f5	243	depends on I2C
93353e80	244	select REGMAP_I2C
359ab9f5 MH	245	help
	246	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	247	in handheld and portable equipment. The MAX17042 is configured
	248	to operate with a single lithium cell. MAX8997 and MAX8966 are
	249	multi-function devices that include fuel gauages that are compatible
9a8422d2 RP	250	with MAX17042. This driver also supports max17047/50 chips which are
9a8422d2 RP	251	improved version of max17042.
359ab9f5	252
e3e8d1c9 MV	253	config BATTERY_Z2
	254	tristate "Z2 battery driver"
	255	depends on I2C && MACH_ZIPIT2
	256	help
	257	Say Y to include support for the battery on the Zipit Z2.
	258
808be4b2 VK	259	config BATTERY_S3C_ADC
	260	tristate "Battery driver for Samsung ADC based monitoring"
	261	depends on S3C_ADC
	262	help
	263	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	264
da0a00eb MB	265	config BATTERY_TWL4030_MADC
	266	tristate "TWL4030 MADC battery driver"
	267	depends on TWL4030_MADC
	268	help
	269	Say Y here to enable this dumb driver for batteries managed
	270	through the TWL4030 MADC.
	271
a830d28b JZ	272	config CHARGER_88PM860X
	273	tristate "Marvell 88PM860x Charger driver"
	274	depends on MFD_88PM860X && BATTERY_88PM860X
	275	help
	276	Say Y here to enable charger for Marvell 88PM860x chip.
	277
f5714dc9 BR	278	config CHARGER_PCF50633
	279	tristate "NXP PCF50633 MBC"
	280	depends on MFD_PCF50633
	281	help
	282	Say Y to include support for NXP PCF50633 Main Battery Charger.
	283
f6a21388 LPC	284	config BATTERY_JZ4740
	285	tristate "Ingenic JZ4740 battery"
	286	depends on MACH_JZ4740
	287	depends on MFD_JZ4740_ADC
	288	help
	289	Say Y to enable support for the battery on Ingenic JZ4740 based
	290	boards.
	291
	292	This driver can be build as a module. If so, the module will be
	293	called jz4740-battery.
	294
6721081b NM	295	config BATTERY_INTEL_MID
	296	tristate "Battery driver for Intel MID platforms"
	297	depends on INTEL_SCU_IPC && SPI
	298	help
	299	Say Y here to enable the battery driver on Intel MID
	300	platforms.
	301
04930baf PR	302	config BATTERY_RX51
	303	tristate "Nokia RX-51 (N900) battery driver"
	304	depends on TWL4030_MADC
	305	help
	306	Say Y here to enable support for battery information on Nokia
	307	RX-51, also known as N900 tablet.
	308
ec46475f HK	309	config CHARGER_ISP1704
ec46475f HK	310	tristate "ISP1704 USB Charger Detection"
fd891498	311	depends on USB_PHY
5a8d651a	312	depends on USB_GADGET \|\| !USB_GADGET # if USB_GADGET=m, this can't be 'y'
ec46475f HK	313	help
	314	Say Y to enable support for USB Charger Detection with
	315	ISP1707/ISP1704 USB transceivers.
	316
b14a9ccc MH	317	config CHARGER_MAX8903
	318	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	319	help
	320	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	321	The driver supports controlling charger-enable and current-limit
	322	pins based on the status of charger connections with interrupt
	323	handlers.
	324
2e727f17 GI	325	config CHARGER_TWL4030
2e727f17 GI	326	tristate "OMAP TWL4030 BCI charger driver"
0f4998cb	327	depends on IIO && TWL4030_CORE
2e727f17 GI	328	help
	329	Say Y here to enable support for TWL4030 Battery Charge Interface.
	330
2165c8a4	331	config CHARGER_LP8727
e39b828f	332	tristate "TI/National Semiconductor LP8727 charger driver"
2165c8a4 WK	333	depends on I2C
	334	help
	335	Say Y here to enable support for LP8727 Charger Driver.
	336
98a27664 KM	337	config CHARGER_LP8788
	338	tristate "TI LP8788 charger driver"
	339	depends on MFD_LP8788
	340	depends on LP8788_ADC
237a1b01	341	depends on IIO
98a27664 KM	342	help
	343	Say Y to enable support for the LP8788 linear charger.
	344
5070437c LPC	345	config CHARGER_GPIO
5070437c LPC	346	tristate "GPIO charger"
1e8b82c1	347	depends on GPIOLIB \|\| COMPILE_TEST
5070437c LPC	348	help
	349	Say Y to include support for chargers which report their online status
	350	through a GPIO pin.
	351
	352	This driver can be build as a module. If so, the module will be
	353	called gpio-charger.
	354
3bb3dbbd DK	355	config CHARGER_MANAGER
3bb3dbbd DK	356	bool "Battery charger manager for multiple chargers"
c1155c64	357	depends on REGULATOR
c4727555	358	select EXTCON
3bb3dbbd DK	359	help
	360	Say Y to enable charger-manager support, which allows multiple
	361	chargers attached to a battery and multiple batteries attached to a
	362	system. The charger-manager also can monitor charging status in
	363	runtime and in suspend-to-RAM by waking up the system periodically
	364	with help of suspend_again support.
	365
55e64701	366	config CHARGER_MAX14577
3682a8ee	367	tristate "Maxim MAX14577/77836 battery charger driver"
55e64701 KK	368	depends on MFD_MAX14577
	369	help
	370	Say Y to enable support for the battery charger control sysfs and
3682a8ee	371	platform data of MAX14577/77836 MUICs.
55e64701	372
87c2d906 KK	373	config CHARGER_MAX77693
	374	tristate "Maxim MAX77693 battery charger driver"
	375	depends on MFD_MAX77693
	376	help
	377	Say Y to enable support for the Maxim MAX77693 battery charger.
	378
149c077b DK	379	config CHARGER_MAX8997
	380	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	381	depends on MFD_MAX8997 && REGULATOR_MAX8997
	382	help
	383	Say Y to enable support for the battery charger control sysfs and
	384	platform data of MAX8997/LP3974 PMICs.
	385
bb4ce970 DK	386	config CHARGER_MAX8998
	387	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	388	depends on MFD_MAX8998 && REGULATOR_MAX8998
	389	help
	390	Say Y to enable support for the battery charger control sysfs and
	391	platform data of MAX8998/LP3974 PMICs.
	392
56d7df87 CC	393	config CHARGER_QCOM_SMBB
	394	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	395	depends on MFD_SPMI_PMIC \|\| COMPILE_TEST
	396	depends on OF
eee1d077	397	depends on EXTCON
56d7df87 CC	398	help
	399	Say Y to include support for the Switch-Mode Battery Charger and
	400	Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
	401	is an integrated, single-cell lithium-ion battery charger. DT
	402	configuration is required for loading, see the devicetree
	403	documentation for more detail. The base name for this driver is
	404	'pm8941_charger'.
	405
7ad85830 AV	406	config CHARGER_BQ2415X
	407	tristate "TI BQ2415x battery charger driver"
	408	depends on I2C
	409	help
	410	Say Y to enable support for the TI BQ2415x battery charger
	411	PMICs.
	412
	413	You'll need this driver to charge batteries on e.g. Nokia
	414	RX-51/N900.
	415
d7bf353f MG	416	config CHARGER_BQ24190
d7bf353f MG	417	tristate "TI BQ24190 battery charger driver"
1e8b82c1 GU	418	depends on I2C
1e8b82c1 GU	419	depends on GPIOLIB \|\| COMPILE_TEST
d7bf353f MG	420	help
	421	Say Y to enable support for the TI BQ24190 battery charger.
	422
2219a935	423	config CHARGER_BQ24257
bf02dca9	424	tristate "TI BQ24250/24251/24257 battery charger driver"
1e8b82c1 GU	425	depends on I2C
1e8b82c1 GU	426	depends on GPIOLIB \|\| COMPILE_TEST
2219a935 LP	427	depends on REGMAP_I2C
2219a935 LP	428	help
bf02dca9 AD	429	Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
bf02dca9 AD	430	chargers.
2219a935	431
ce773992 DS	432	config CHARGER_BQ24735
ce773992 DS	433	tristate "TI BQ24735 battery charger support"
1e8b82c1 GU	434	depends on I2C
1e8b82c1 GU	435	depends on GPIOLIB \|\| COMPILE_TEST
ce773992 DS	436	help
	437	Say Y to enable support for the TI BQ24735 battery charger.
	438
4aeae9cb LP	439	config CHARGER_BQ25890
4aeae9cb LP	440	tristate "TI BQ25890 battery charger driver"
1e8b82c1 GU	441	depends on I2C
1e8b82c1 GU	442	depends on GPIOLIB \|\| COMPILE_TEST
4aeae9cb LP	443	select REGMAP_I2C
	444	help
	445	Say Y to enable support for the TI BQ25890 battery charger.
	446
ed1a230f BR	447	config CHARGER_SMB347
	448	tristate "Summit Microelectronics SMB347 Battery Charger"
	449	depends on I2C
34298d40	450	select REGMAP_I2C
ed1a230f BR	451	help
	452	Say Y to include support for Summit Microelectronics SMB347
	453	Battery Charger.
	454
6f8da5df RK	455	config CHARGER_TPS65090
	456	tristate "TPS65090 battery charger driver"
	457	depends on MFD_TPS65090
	458	help
	459	Say Y here to enable support for battery charging with TPS65090
	460	PMIC chips.
	461
3636859b EBS	462	config CHARGER_TPS65217
	463	tristate "TPS65217 battery charger driver"
	464	depends on MFD_TPS65217
	465	help
	466	Say Y here to enable support for battery charging with TPS65217
	467	PMIC chips.
	468
085bc24d ML	469	config BATTERY_GAUGE_LTC2941
	470	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	471	depends on I2C
	472	help
	473	Say Y here to include support for LTC2941 and LTC2943 Battery
	474	Gauge IC. The driver reports the charge count continuously, and
	475	measures the voltage and temperature every 10 seconds.
	476
1f855824 AM	477	config AB8500_BM
	478	bool "AB8500 Battery Management Driver"
	479	depends on AB8500_CORE && AB8500_GPADC
	480	help
8b7d133c	481	Say Y to include support for AB8500 battery management.
1f855824	482
84d7b768 ML	483	config BATTERY_GOLDFISH
84d7b768 ML	484	tristate "Goldfish battery driver"
0244ad00	485	depends on GOLDFISH \|\| COMPILE_TEST
850bc4d5	486	depends on HAS_IOMEM
84d7b768 ML	487	help
	488	Say Y to enable support for the battery and AC power in the
	489	Goldfish emulator.
	490
b847dd96 BS	491	config BATTERY_RT5033
	492	tristate "RT5033 fuel gauge support"
	493	depends on MFD_RT5033
	494	help
	495	This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	496	The fuelgauge calculates and determines the battery state of charge
	497	according to battery open circuit voltage.
	498
e86d69dd AMN	499	config CHARGER_RT9455
e86d69dd AMN	500	tristate "Richtek RT9455 battery charger driver"
1e8b82c1 GU	501	depends on I2C
1e8b82c1 GU	502	depends on GPIOLIB \|\| COMPILE_TEST
e86d69dd AMN	503	select REGMAP_I2C
	504	help
	505	Say Y to enable support for Richtek RT9455 battery charger.
	506
69fb4dca HG	507	config AXP20X_POWER
	508	tristate "AXP20x power supply driver"
	509	depends on MFD_AXP20X
	510	help
	511	This driver provides support for the power supply features of
	512	AXP20x PMIC.
	513
4a11b59d	514	endif # POWER_SUPPLY
21ff63ad	515
f96576bd	516	source "drivers/power/reset/Kconfig"
21ff63ad	517	source "drivers/power/avs/Kconfig"