]>
Commit | Line | Data |
---|---|---|
1668f811 AM |
1 | /* |
2 | * Copyright (C) ST-Ericsson SA 2012 | |
3 | * | |
4 | * Charging algorithm driver for abx500 variants | |
5 | * | |
6 | * License Terms: GNU General Public License v2 | |
7 | * Authors: | |
8 | * Johan Palsson <johan.palsson@stericsson.com> | |
9 | * Karl Komierowski <karl.komierowski@stericsson.com> | |
10 | * Arun R Murthy <arun.murthy@stericsson.com> | |
11 | */ | |
12 | ||
13 | #include <linux/init.h> | |
14 | #include <linux/module.h> | |
15 | #include <linux/device.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/delay.h> | |
18 | #include <linux/slab.h> | |
19 | #include <linux/platform_device.h> | |
20 | #include <linux/power_supply.h> | |
21 | #include <linux/completion.h> | |
22 | #include <linux/workqueue.h> | |
23 | #include <linux/kobject.h> | |
a12810ab R |
24 | #include <linux/of.h> |
25 | #include <linux/mfd/core.h> | |
1668f811 AM |
26 | #include <linux/mfd/abx500.h> |
27 | #include <linux/mfd/abx500/ux500_chargalg.h> | |
28 | #include <linux/mfd/abx500/ab8500-bm.h> | |
29 | ||
30 | /* Watchdog kick interval */ | |
31 | #define CHG_WD_INTERVAL (6 * HZ) | |
32 | ||
33 | /* End-of-charge criteria counter */ | |
34 | #define EOC_COND_CNT 10 | |
35 | ||
1668f811 AM |
36 | #define to_abx500_chargalg_device_info(x) container_of((x), \ |
37 | struct abx500_chargalg, chargalg_psy); | |
38 | ||
39 | enum abx500_chargers { | |
40 | NO_CHG, | |
41 | AC_CHG, | |
42 | USB_CHG, | |
43 | }; | |
44 | ||
45 | struct abx500_chargalg_charger_info { | |
46 | enum abx500_chargers conn_chg; | |
47 | enum abx500_chargers prev_conn_chg; | |
48 | enum abx500_chargers online_chg; | |
49 | enum abx500_chargers prev_online_chg; | |
50 | enum abx500_chargers charger_type; | |
51 | bool usb_chg_ok; | |
52 | bool ac_chg_ok; | |
53 | int usb_volt; | |
54 | int usb_curr; | |
55 | int ac_volt; | |
56 | int ac_curr; | |
57 | int usb_vset; | |
58 | int usb_iset; | |
59 | int ac_vset; | |
60 | int ac_iset; | |
61 | }; | |
62 | ||
63 | struct abx500_chargalg_suspension_status { | |
64 | bool suspended_change; | |
65 | bool ac_suspended; | |
66 | bool usb_suspended; | |
67 | }; | |
68 | ||
69 | struct abx500_chargalg_battery_data { | |
70 | int temp; | |
71 | int volt; | |
72 | int avg_curr; | |
73 | int inst_curr; | |
74 | int percent; | |
75 | }; | |
76 | ||
77 | enum abx500_chargalg_states { | |
78 | STATE_HANDHELD_INIT, | |
79 | STATE_HANDHELD, | |
80 | STATE_CHG_NOT_OK_INIT, | |
81 | STATE_CHG_NOT_OK, | |
82 | STATE_HW_TEMP_PROTECT_INIT, | |
83 | STATE_HW_TEMP_PROTECT, | |
84 | STATE_NORMAL_INIT, | |
85 | STATE_NORMAL, | |
86 | STATE_WAIT_FOR_RECHARGE_INIT, | |
87 | STATE_WAIT_FOR_RECHARGE, | |
88 | STATE_MAINTENANCE_A_INIT, | |
89 | STATE_MAINTENANCE_A, | |
90 | STATE_MAINTENANCE_B_INIT, | |
91 | STATE_MAINTENANCE_B, | |
92 | STATE_TEMP_UNDEROVER_INIT, | |
93 | STATE_TEMP_UNDEROVER, | |
94 | STATE_TEMP_LOWHIGH_INIT, | |
95 | STATE_TEMP_LOWHIGH, | |
96 | STATE_SUSPENDED_INIT, | |
97 | STATE_SUSPENDED, | |
98 | STATE_OVV_PROTECT_INIT, | |
99 | STATE_OVV_PROTECT, | |
100 | STATE_SAFETY_TIMER_EXPIRED_INIT, | |
101 | STATE_SAFETY_TIMER_EXPIRED, | |
102 | STATE_BATT_REMOVED_INIT, | |
103 | STATE_BATT_REMOVED, | |
104 | STATE_WD_EXPIRED_INIT, | |
105 | STATE_WD_EXPIRED, | |
106 | }; | |
107 | ||
108 | static const char *states[] = { | |
109 | "HANDHELD_INIT", | |
110 | "HANDHELD", | |
111 | "CHG_NOT_OK_INIT", | |
112 | "CHG_NOT_OK", | |
113 | "HW_TEMP_PROTECT_INIT", | |
114 | "HW_TEMP_PROTECT", | |
115 | "NORMAL_INIT", | |
116 | "NORMAL", | |
117 | "WAIT_FOR_RECHARGE_INIT", | |
118 | "WAIT_FOR_RECHARGE", | |
119 | "MAINTENANCE_A_INIT", | |
120 | "MAINTENANCE_A", | |
121 | "MAINTENANCE_B_INIT", | |
122 | "MAINTENANCE_B", | |
123 | "TEMP_UNDEROVER_INIT", | |
124 | "TEMP_UNDEROVER", | |
125 | "TEMP_LOWHIGH_INIT", | |
126 | "TEMP_LOWHIGH", | |
127 | "SUSPENDED_INIT", | |
128 | "SUSPENDED", | |
129 | "OVV_PROTECT_INIT", | |
130 | "OVV_PROTECT", | |
131 | "SAFETY_TIMER_EXPIRED_INIT", | |
132 | "SAFETY_TIMER_EXPIRED", | |
133 | "BATT_REMOVED_INIT", | |
134 | "BATT_REMOVED", | |
135 | "WD_EXPIRED_INIT", | |
136 | "WD_EXPIRED", | |
137 | }; | |
138 | ||
139 | struct abx500_chargalg_events { | |
140 | bool batt_unknown; | |
141 | bool mainextchnotok; | |
142 | bool batt_ovv; | |
143 | bool batt_rem; | |
144 | bool btemp_underover; | |
145 | bool btemp_lowhigh; | |
146 | bool main_thermal_prot; | |
147 | bool usb_thermal_prot; | |
148 | bool main_ovv; | |
149 | bool vbus_ovv; | |
150 | bool usbchargernotok; | |
151 | bool safety_timer_expired; | |
152 | bool maintenance_timer_expired; | |
153 | bool ac_wd_expired; | |
154 | bool usb_wd_expired; | |
155 | bool ac_cv_active; | |
156 | bool usb_cv_active; | |
157 | bool vbus_collapsed; | |
158 | }; | |
159 | ||
160 | /** | |
161 | * struct abx500_charge_curr_maximization - Charger maximization parameters | |
162 | * @original_iset: the non optimized/maximised charger current | |
163 | * @current_iset: the charging current used at this moment | |
164 | * @test_delta_i: the delta between the current we want to charge and the | |
165 | current that is really going into the battery | |
166 | * @condition_cnt: number of iterations needed before a new charger current | |
167 | is set | |
168 | * @max_current: maximum charger current | |
169 | * @wait_cnt: to avoid too fast current step down in case of charger | |
170 | * voltage collapse, we insert this delay between step | |
171 | * down | |
172 | * @level: tells in how many steps the charging current has been | |
173 | increased | |
174 | */ | |
175 | struct abx500_charge_curr_maximization { | |
176 | int original_iset; | |
177 | int current_iset; | |
178 | int test_delta_i; | |
179 | int condition_cnt; | |
180 | int max_current; | |
181 | int wait_cnt; | |
182 | u8 level; | |
183 | }; | |
184 | ||
185 | enum maxim_ret { | |
186 | MAXIM_RET_NOACTION, | |
187 | MAXIM_RET_CHANGE, | |
188 | MAXIM_RET_IBAT_TOO_HIGH, | |
189 | }; | |
190 | ||
191 | /** | |
192 | * struct abx500_chargalg - abx500 Charging algorithm device information | |
193 | * @dev: pointer to the structure device | |
194 | * @charge_status: battery operating status | |
195 | * @eoc_cnt: counter used to determine end-of_charge | |
1668f811 AM |
196 | * @maintenance_chg: indicate if maintenance charge is active |
197 | * @t_hyst_norm temperature hysteresis when the temperature has been | |
198 | * over or under normal limits | |
199 | * @t_hyst_lowhigh temperature hysteresis when the temperature has been | |
200 | * over or under the high or low limits | |
201 | * @charge_state: current state of the charging algorithm | |
202 | * @ccm charging current maximization parameters | |
203 | * @chg_info: information about connected charger types | |
204 | * @batt_data: data of the battery | |
205 | * @susp_status: current charger suspension status | |
b0284de0 | 206 | * @bm: Platform specific battery management information |
1668f811 AM |
207 | * @chargalg_psy: structure that holds the battery properties exposed by |
208 | * the charging algorithm | |
209 | * @events: structure for information about events triggered | |
210 | * @chargalg_wq: work queue for running the charging algorithm | |
211 | * @chargalg_periodic_work: work to run the charging algorithm periodically | |
212 | * @chargalg_wd_work: work to kick the charger watchdog periodically | |
213 | * @chargalg_work: work to run the charging algorithm instantly | |
214 | * @safety_timer: charging safety timer | |
215 | * @maintenance_timer: maintenance charging timer | |
216 | * @chargalg_kobject: structure of type kobject | |
217 | */ | |
218 | struct abx500_chargalg { | |
219 | struct device *dev; | |
220 | int charge_status; | |
221 | int eoc_cnt; | |
1668f811 AM |
222 | bool maintenance_chg; |
223 | int t_hyst_norm; | |
224 | int t_hyst_lowhigh; | |
225 | enum abx500_chargalg_states charge_state; | |
226 | struct abx500_charge_curr_maximization ccm; | |
227 | struct abx500_chargalg_charger_info chg_info; | |
228 | struct abx500_chargalg_battery_data batt_data; | |
229 | struct abx500_chargalg_suspension_status susp_status; | |
b0284de0 | 230 | struct abx500_bm_data *bm; |
1668f811 AM |
231 | struct power_supply chargalg_psy; |
232 | struct ux500_charger *ac_chg; | |
233 | struct ux500_charger *usb_chg; | |
234 | struct abx500_chargalg_events events; | |
235 | struct workqueue_struct *chargalg_wq; | |
236 | struct delayed_work chargalg_periodic_work; | |
237 | struct delayed_work chargalg_wd_work; | |
238 | struct work_struct chargalg_work; | |
239 | struct timer_list safety_timer; | |
240 | struct timer_list maintenance_timer; | |
241 | struct kobject chargalg_kobject; | |
242 | }; | |
243 | ||
244 | /* Main battery properties */ | |
245 | static enum power_supply_property abx500_chargalg_props[] = { | |
246 | POWER_SUPPLY_PROP_STATUS, | |
247 | POWER_SUPPLY_PROP_HEALTH, | |
248 | }; | |
249 | ||
250 | /** | |
251 | * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer | |
252 | * @data: pointer to the abx500_chargalg structure | |
253 | * | |
254 | * This function gets called when the safety timer for the charger | |
255 | * expires | |
256 | */ | |
257 | static void abx500_chargalg_safety_timer_expired(unsigned long data) | |
258 | { | |
259 | struct abx500_chargalg *di = (struct abx500_chargalg *) data; | |
260 | dev_err(di->dev, "Safety timer expired\n"); | |
261 | di->events.safety_timer_expired = true; | |
262 | ||
263 | /* Trigger execution of the algorithm instantly */ | |
264 | queue_work(di->chargalg_wq, &di->chargalg_work); | |
265 | } | |
266 | ||
267 | /** | |
268 | * abx500_chargalg_maintenance_timer_expired() - Expiration of | |
269 | * the maintenance timer | |
270 | * @i: pointer to the abx500_chargalg structure | |
271 | * | |
272 | * This function gets called when the maintenence timer | |
273 | * expires | |
274 | */ | |
275 | static void abx500_chargalg_maintenance_timer_expired(unsigned long data) | |
276 | { | |
277 | ||
278 | struct abx500_chargalg *di = (struct abx500_chargalg *) data; | |
279 | dev_dbg(di->dev, "Maintenance timer expired\n"); | |
280 | di->events.maintenance_timer_expired = true; | |
281 | ||
282 | /* Trigger execution of the algorithm instantly */ | |
283 | queue_work(di->chargalg_wq, &di->chargalg_work); | |
284 | } | |
285 | ||
286 | /** | |
287 | * abx500_chargalg_state_to() - Change charge state | |
288 | * @di: pointer to the abx500_chargalg structure | |
289 | * | |
290 | * This function gets called when a charge state change should occur | |
291 | */ | |
292 | static void abx500_chargalg_state_to(struct abx500_chargalg *di, | |
293 | enum abx500_chargalg_states state) | |
294 | { | |
295 | dev_dbg(di->dev, | |
296 | "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n", | |
297 | di->charge_state == state ? "NO" : "YES", | |
298 | di->charge_state, | |
299 | states[di->charge_state], | |
300 | state, | |
301 | states[state]); | |
302 | ||
303 | di->charge_state = state; | |
304 | } | |
305 | ||
306 | /** | |
307 | * abx500_chargalg_check_charger_connection() - Check charger connection change | |
308 | * @di: pointer to the abx500_chargalg structure | |
309 | * | |
310 | * This function will check if there is a change in the charger connection | |
311 | * and change charge state accordingly. AC has precedence over USB. | |
312 | */ | |
313 | static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) | |
314 | { | |
315 | if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg || | |
316 | di->susp_status.suspended_change) { | |
317 | /* | |
318 | * Charger state changed or suspension | |
319 | * has changed since last update | |
320 | */ | |
321 | if ((di->chg_info.conn_chg & AC_CHG) && | |
322 | !di->susp_status.ac_suspended) { | |
323 | dev_dbg(di->dev, "Charging source is AC\n"); | |
324 | if (di->chg_info.charger_type != AC_CHG) { | |
325 | di->chg_info.charger_type = AC_CHG; | |
326 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
327 | } | |
328 | } else if ((di->chg_info.conn_chg & USB_CHG) && | |
329 | !di->susp_status.usb_suspended) { | |
330 | dev_dbg(di->dev, "Charging source is USB\n"); | |
331 | di->chg_info.charger_type = USB_CHG; | |
332 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
333 | } else if (di->chg_info.conn_chg && | |
334 | (di->susp_status.ac_suspended || | |
335 | di->susp_status.usb_suspended)) { | |
336 | dev_dbg(di->dev, "Charging is suspended\n"); | |
337 | di->chg_info.charger_type = NO_CHG; | |
338 | abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT); | |
339 | } else { | |
340 | dev_dbg(di->dev, "Charging source is OFF\n"); | |
341 | di->chg_info.charger_type = NO_CHG; | |
342 | abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); | |
343 | } | |
344 | di->chg_info.prev_conn_chg = di->chg_info.conn_chg; | |
345 | di->susp_status.suspended_change = false; | |
346 | } | |
347 | return di->chg_info.conn_chg; | |
348 | } | |
349 | ||
350 | /** | |
351 | * abx500_chargalg_start_safety_timer() - Start charging safety timer | |
352 | * @di: pointer to the abx500_chargalg structure | |
353 | * | |
354 | * The safety timer is used to avoid overcharging of old or bad batteries. | |
355 | * There are different timers for AC and USB | |
356 | */ | |
357 | static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) | |
358 | { | |
359 | unsigned long timer_expiration = 0; | |
360 | ||
361 | switch (di->chg_info.charger_type) { | |
362 | case AC_CHG: | |
363 | timer_expiration = | |
364 | round_jiffies(jiffies + | |
b0284de0 | 365 | (di->bm->main_safety_tmr_h * 3600 * HZ)); |
1668f811 AM |
366 | break; |
367 | ||
368 | case USB_CHG: | |
369 | timer_expiration = | |
370 | round_jiffies(jiffies + | |
b0284de0 | 371 | (di->bm->usb_safety_tmr_h * 3600 * HZ)); |
1668f811 AM |
372 | break; |
373 | ||
374 | default: | |
375 | dev_err(di->dev, "Unknown charger to charge from\n"); | |
376 | break; | |
377 | } | |
378 | ||
379 | di->events.safety_timer_expired = false; | |
380 | di->safety_timer.expires = timer_expiration; | |
381 | if (!timer_pending(&di->safety_timer)) | |
382 | add_timer(&di->safety_timer); | |
383 | else | |
384 | mod_timer(&di->safety_timer, timer_expiration); | |
385 | } | |
386 | ||
387 | /** | |
388 | * abx500_chargalg_stop_safety_timer() - Stop charging safety timer | |
389 | * @di: pointer to the abx500_chargalg structure | |
390 | * | |
391 | * The safety timer is stopped whenever the NORMAL state is exited | |
392 | */ | |
393 | static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) | |
394 | { | |
395 | di->events.safety_timer_expired = false; | |
396 | del_timer(&di->safety_timer); | |
397 | } | |
398 | ||
399 | /** | |
400 | * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer | |
401 | * @di: pointer to the abx500_chargalg structure | |
402 | * @duration: duration of ther maintenance timer in hours | |
403 | * | |
404 | * The maintenance timer is used to maintain the charge in the battery once | |
405 | * the battery is considered full. These timers are chosen to match the | |
406 | * discharge curve of the battery | |
407 | */ | |
408 | static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, | |
409 | int duration) | |
410 | { | |
411 | unsigned long timer_expiration; | |
412 | ||
413 | /* Convert from hours to jiffies */ | |
414 | timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ)); | |
415 | ||
416 | di->events.maintenance_timer_expired = false; | |
417 | di->maintenance_timer.expires = timer_expiration; | |
418 | if (!timer_pending(&di->maintenance_timer)) | |
419 | add_timer(&di->maintenance_timer); | |
420 | else | |
421 | mod_timer(&di->maintenance_timer, timer_expiration); | |
422 | } | |
423 | ||
424 | /** | |
425 | * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer | |
426 | * @di: pointer to the abx500_chargalg structure | |
427 | * | |
428 | * The maintenance timer is stopped whenever maintenance ends or when another | |
429 | * state is entered | |
430 | */ | |
431 | static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di) | |
432 | { | |
433 | di->events.maintenance_timer_expired = false; | |
434 | del_timer(&di->maintenance_timer); | |
435 | } | |
436 | ||
437 | /** | |
438 | * abx500_chargalg_kick_watchdog() - Kick charger watchdog | |
439 | * @di: pointer to the abx500_chargalg structure | |
440 | * | |
441 | * The charger watchdog have to be kicked periodically whenever the charger is | |
442 | * on, else the ABB will reset the system | |
443 | */ | |
444 | static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) | |
445 | { | |
446 | /* Check if charger exists and kick watchdog if charging */ | |
447 | if (di->ac_chg && di->ac_chg->ops.kick_wd && | |
e07a5645 LP |
448 | di->chg_info.online_chg & AC_CHG) { |
449 | /* | |
450 | * If AB charger watchdog expired, pm2xxx charging | |
451 | * gets disabled. To be safe, kick both AB charger watchdog | |
452 | * and pm2xxx watchdog. | |
453 | */ | |
454 | if (di->ac_chg->external && | |
455 | di->usb_chg && di->usb_chg->ops.kick_wd) | |
456 | di->usb_chg->ops.kick_wd(di->usb_chg); | |
457 | ||
1668f811 | 458 | return di->ac_chg->ops.kick_wd(di->ac_chg); |
e07a5645 | 459 | } |
1668f811 AM |
460 | else if (di->usb_chg && di->usb_chg->ops.kick_wd && |
461 | di->chg_info.online_chg & USB_CHG) | |
462 | return di->usb_chg->ops.kick_wd(di->usb_chg); | |
463 | ||
464 | return -ENXIO; | |
465 | } | |
466 | ||
467 | /** | |
468 | * abx500_chargalg_ac_en() - Turn on/off the AC charger | |
469 | * @di: pointer to the abx500_chargalg structure | |
470 | * @enable: charger on/off | |
471 | * @vset: requested charger output voltage | |
472 | * @iset: requested charger output current | |
473 | * | |
474 | * The AC charger will be turned on/off with the requested charge voltage and | |
475 | * current | |
476 | */ | |
477 | static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, | |
478 | int vset, int iset) | |
479 | { | |
480 | if (!di->ac_chg || !di->ac_chg->ops.enable) | |
481 | return -ENXIO; | |
482 | ||
483 | /* Select maximum of what both the charger and the battery supports */ | |
484 | if (di->ac_chg->max_out_volt) | |
485 | vset = min(vset, di->ac_chg->max_out_volt); | |
486 | if (di->ac_chg->max_out_curr) | |
487 | iset = min(iset, di->ac_chg->max_out_curr); | |
488 | ||
489 | di->chg_info.ac_iset = iset; | |
490 | di->chg_info.ac_vset = vset; | |
491 | ||
492 | return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset); | |
493 | } | |
494 | ||
495 | /** | |
496 | * abx500_chargalg_usb_en() - Turn on/off the USB charger | |
497 | * @di: pointer to the abx500_chargalg structure | |
498 | * @enable: charger on/off | |
499 | * @vset: requested charger output voltage | |
500 | * @iset: requested charger output current | |
501 | * | |
502 | * The USB charger will be turned on/off with the requested charge voltage and | |
503 | * current | |
504 | */ | |
505 | static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable, | |
506 | int vset, int iset) | |
507 | { | |
508 | if (!di->usb_chg || !di->usb_chg->ops.enable) | |
509 | return -ENXIO; | |
510 | ||
511 | /* Select maximum of what both the charger and the battery supports */ | |
512 | if (di->usb_chg->max_out_volt) | |
513 | vset = min(vset, di->usb_chg->max_out_volt); | |
514 | if (di->usb_chg->max_out_curr) | |
515 | iset = min(iset, di->usb_chg->max_out_curr); | |
516 | ||
517 | di->chg_info.usb_iset = iset; | |
518 | di->chg_info.usb_vset = vset; | |
519 | ||
520 | return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset); | |
521 | } | |
522 | ||
523 | /** | |
524 | * abx500_chargalg_update_chg_curr() - Update charger current | |
525 | * @di: pointer to the abx500_chargalg structure | |
526 | * @iset: requested charger output current | |
527 | * | |
528 | * The charger output current will be updated for the charger | |
529 | * that is currently in use | |
530 | */ | |
531 | static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di, | |
532 | int iset) | |
533 | { | |
534 | /* Check if charger exists and update current if charging */ | |
535 | if (di->ac_chg && di->ac_chg->ops.update_curr && | |
536 | di->chg_info.charger_type & AC_CHG) { | |
537 | /* | |
538 | * Select maximum of what both the charger | |
539 | * and the battery supports | |
540 | */ | |
541 | if (di->ac_chg->max_out_curr) | |
542 | iset = min(iset, di->ac_chg->max_out_curr); | |
543 | ||
544 | di->chg_info.ac_iset = iset; | |
545 | ||
546 | return di->ac_chg->ops.update_curr(di->ac_chg, iset); | |
547 | } else if (di->usb_chg && di->usb_chg->ops.update_curr && | |
548 | di->chg_info.charger_type & USB_CHG) { | |
549 | /* | |
550 | * Select maximum of what both the charger | |
551 | * and the battery supports | |
552 | */ | |
553 | if (di->usb_chg->max_out_curr) | |
554 | iset = min(iset, di->usb_chg->max_out_curr); | |
555 | ||
556 | di->chg_info.usb_iset = iset; | |
557 | ||
558 | return di->usb_chg->ops.update_curr(di->usb_chg, iset); | |
559 | } | |
560 | ||
561 | return -ENXIO; | |
562 | } | |
563 | ||
564 | /** | |
565 | * abx500_chargalg_stop_charging() - Stop charging | |
566 | * @di: pointer to the abx500_chargalg structure | |
567 | * | |
568 | * This function is called from any state where charging should be stopped. | |
569 | * All charging is disabled and all status parameters and timers are changed | |
570 | * accordingly | |
571 | */ | |
572 | static void abx500_chargalg_stop_charging(struct abx500_chargalg *di) | |
573 | { | |
574 | abx500_chargalg_ac_en(di, false, 0, 0); | |
575 | abx500_chargalg_usb_en(di, false, 0, 0); | |
576 | abx500_chargalg_stop_safety_timer(di); | |
577 | abx500_chargalg_stop_maintenance_timer(di); | |
578 | di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
579 | di->maintenance_chg = false; | |
580 | cancel_delayed_work(&di->chargalg_wd_work); | |
581 | power_supply_changed(&di->chargalg_psy); | |
582 | } | |
583 | ||
584 | /** | |
585 | * abx500_chargalg_hold_charging() - Pauses charging | |
586 | * @di: pointer to the abx500_chargalg structure | |
587 | * | |
588 | * This function is called in the case where maintenance charging has been | |
589 | * disabled and instead a battery voltage mode is entered to check when the | |
590 | * battery voltage has reached a certain recharge voltage | |
591 | */ | |
592 | static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) | |
593 | { | |
594 | abx500_chargalg_ac_en(di, false, 0, 0); | |
595 | abx500_chargalg_usb_en(di, false, 0, 0); | |
596 | abx500_chargalg_stop_safety_timer(di); | |
597 | abx500_chargalg_stop_maintenance_timer(di); | |
598 | di->charge_status = POWER_SUPPLY_STATUS_CHARGING; | |
599 | di->maintenance_chg = false; | |
600 | cancel_delayed_work(&di->chargalg_wd_work); | |
601 | power_supply_changed(&di->chargalg_psy); | |
602 | } | |
603 | ||
604 | /** | |
605 | * abx500_chargalg_start_charging() - Start the charger | |
606 | * @di: pointer to the abx500_chargalg structure | |
607 | * @vset: requested charger output voltage | |
608 | * @iset: requested charger output current | |
609 | * | |
610 | * A charger will be enabled depending on the requested charger type that was | |
611 | * detected previously. | |
612 | */ | |
613 | static void abx500_chargalg_start_charging(struct abx500_chargalg *di, | |
614 | int vset, int iset) | |
615 | { | |
3edebfcd LJ |
616 | bool start_chargalg_wd = true; |
617 | ||
1668f811 AM |
618 | switch (di->chg_info.charger_type) { |
619 | case AC_CHG: | |
620 | dev_dbg(di->dev, | |
621 | "AC parameters: Vset %d, Ich %d\n", vset, iset); | |
622 | abx500_chargalg_usb_en(di, false, 0, 0); | |
623 | abx500_chargalg_ac_en(di, true, vset, iset); | |
624 | break; | |
625 | ||
626 | case USB_CHG: | |
627 | dev_dbg(di->dev, | |
628 | "USB parameters: Vset %d, Ich %d\n", vset, iset); | |
629 | abx500_chargalg_ac_en(di, false, 0, 0); | |
630 | abx500_chargalg_usb_en(di, true, vset, iset); | |
631 | break; | |
632 | ||
633 | default: | |
634 | dev_err(di->dev, "Unknown charger to charge from\n"); | |
3edebfcd | 635 | start_chargalg_wd = false; |
1668f811 AM |
636 | break; |
637 | } | |
3edebfcd LJ |
638 | |
639 | if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work)) | |
640 | queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); | |
1668f811 AM |
641 | } |
642 | ||
643 | /** | |
644 | * abx500_chargalg_check_temp() - Check battery temperature ranges | |
645 | * @di: pointer to the abx500_chargalg structure | |
646 | * | |
647 | * The battery temperature is checked against the predefined limits and the | |
648 | * charge state is changed accordingly | |
649 | */ | |
650 | static void abx500_chargalg_check_temp(struct abx500_chargalg *di) | |
651 | { | |
b0284de0 LJ |
652 | if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) && |
653 | di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) { | |
1668f811 AM |
654 | /* Temp OK! */ |
655 | di->events.btemp_underover = false; | |
656 | di->events.btemp_lowhigh = false; | |
657 | di->t_hyst_norm = 0; | |
658 | di->t_hyst_lowhigh = 0; | |
659 | } else { | |
b0284de0 | 660 | if (((di->batt_data.temp >= di->bm->temp_high) && |
1668f811 | 661 | (di->batt_data.temp < |
b0284de0 | 662 | (di->bm->temp_over - di->t_hyst_lowhigh))) || |
1668f811 | 663 | ((di->batt_data.temp > |
b0284de0 LJ |
664 | (di->bm->temp_under + di->t_hyst_lowhigh)) && |
665 | (di->batt_data.temp <= di->bm->temp_low))) { | |
1668f811 AM |
666 | /* TEMP minor!!!!! */ |
667 | di->events.btemp_underover = false; | |
668 | di->events.btemp_lowhigh = true; | |
b0284de0 | 669 | di->t_hyst_norm = di->bm->temp_hysteresis; |
1668f811 | 670 | di->t_hyst_lowhigh = 0; |
b0284de0 LJ |
671 | } else if (di->batt_data.temp <= di->bm->temp_under || |
672 | di->batt_data.temp >= di->bm->temp_over) { | |
1668f811 AM |
673 | /* TEMP major!!!!! */ |
674 | di->events.btemp_underover = true; | |
675 | di->events.btemp_lowhigh = false; | |
676 | di->t_hyst_norm = 0; | |
b0284de0 | 677 | di->t_hyst_lowhigh = di->bm->temp_hysteresis; |
1668f811 AM |
678 | } else { |
679 | /* Within hysteresis */ | |
680 | dev_dbg(di->dev, "Within hysteresis limit temp: %d " | |
681 | "hyst_lowhigh %d, hyst normal %d\n", | |
682 | di->batt_data.temp, di->t_hyst_lowhigh, | |
683 | di->t_hyst_norm); | |
684 | } | |
685 | } | |
686 | } | |
687 | ||
688 | /** | |
689 | * abx500_chargalg_check_charger_voltage() - Check charger voltage | |
690 | * @di: pointer to the abx500_chargalg structure | |
691 | * | |
692 | * Charger voltage is checked against maximum limit | |
693 | */ | |
694 | static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) | |
695 | { | |
b0284de0 | 696 | if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max) |
1668f811 AM |
697 | di->chg_info.usb_chg_ok = false; |
698 | else | |
699 | di->chg_info.usb_chg_ok = true; | |
700 | ||
b0284de0 | 701 | if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max) |
1668f811 AM |
702 | di->chg_info.ac_chg_ok = false; |
703 | else | |
704 | di->chg_info.ac_chg_ok = true; | |
705 | ||
706 | } | |
707 | ||
708 | /** | |
709 | * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled | |
710 | * @di: pointer to the abx500_chargalg structure | |
711 | * | |
712 | * End-of-charge criteria is fulfilled when the battery voltage is above a | |
713 | * certain limit and the battery current is below a certain limit for a | |
714 | * predefined number of consecutive seconds. If true, the battery is full | |
715 | */ | |
716 | static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) | |
717 | { | |
718 | if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && | |
719 | di->charge_state == STATE_NORMAL && | |
720 | !di->maintenance_chg && (di->batt_data.volt >= | |
b0284de0 | 721 | di->bm->bat_type[di->bm->batt_id].termination_vol || |
1668f811 AM |
722 | di->events.usb_cv_active || di->events.ac_cv_active) && |
723 | di->batt_data.avg_curr < | |
b0284de0 | 724 | di->bm->bat_type[di->bm->batt_id].termination_curr && |
1668f811 AM |
725 | di->batt_data.avg_curr > 0) { |
726 | if (++di->eoc_cnt >= EOC_COND_CNT) { | |
727 | di->eoc_cnt = 0; | |
728 | di->charge_status = POWER_SUPPLY_STATUS_FULL; | |
729 | di->maintenance_chg = true; | |
730 | dev_dbg(di->dev, "EOC reached!\n"); | |
731 | power_supply_changed(&di->chargalg_psy); | |
732 | } else { | |
733 | dev_dbg(di->dev, | |
734 | " EOC limit reached for the %d" | |
735 | " time, out of %d before EOC\n", | |
736 | di->eoc_cnt, | |
737 | EOC_COND_CNT); | |
738 | } | |
739 | } else { | |
740 | di->eoc_cnt = 0; | |
741 | } | |
742 | } | |
743 | ||
744 | static void init_maxim_chg_curr(struct abx500_chargalg *di) | |
745 | { | |
746 | di->ccm.original_iset = | |
b0284de0 | 747 | di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; |
1668f811 | 748 | di->ccm.current_iset = |
b0284de0 LJ |
749 | di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; |
750 | di->ccm.test_delta_i = di->bm->maxi->charger_curr_step; | |
751 | di->ccm.max_current = di->bm->maxi->chg_curr; | |
752 | di->ccm.condition_cnt = di->bm->maxi->wait_cycles; | |
1668f811 AM |
753 | di->ccm.level = 0; |
754 | } | |
755 | ||
756 | /** | |
757 | * abx500_chargalg_chg_curr_maxim - increases the charger current to | |
758 | * compensate for the system load | |
759 | * @di pointer to the abx500_chargalg structure | |
760 | * | |
761 | * This maximization function is used to raise the charger current to get the | |
762 | * battery current as close to the optimal value as possible. The battery | |
763 | * current during charging is affected by the system load | |
764 | */ | |
765 | static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) | |
766 | { | |
767 | int delta_i; | |
768 | ||
b0284de0 | 769 | if (!di->bm->maxi->ena_maxi) |
1668f811 AM |
770 | return MAXIM_RET_NOACTION; |
771 | ||
772 | delta_i = di->ccm.original_iset - di->batt_data.inst_curr; | |
773 | ||
774 | if (di->events.vbus_collapsed) { | |
775 | dev_dbg(di->dev, "Charger voltage has collapsed %d\n", | |
776 | di->ccm.wait_cnt); | |
777 | if (di->ccm.wait_cnt == 0) { | |
778 | dev_dbg(di->dev, "lowering current\n"); | |
779 | di->ccm.wait_cnt++; | |
b0284de0 | 780 | di->ccm.condition_cnt = di->bm->maxi->wait_cycles; |
1668f811 AM |
781 | di->ccm.max_current = |
782 | di->ccm.current_iset - di->ccm.test_delta_i; | |
783 | di->ccm.current_iset = di->ccm.max_current; | |
784 | di->ccm.level--; | |
785 | return MAXIM_RET_CHANGE; | |
786 | } else { | |
787 | dev_dbg(di->dev, "waiting\n"); | |
788 | /* Let's go in here twice before lowering curr again */ | |
789 | di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3; | |
790 | return MAXIM_RET_NOACTION; | |
791 | } | |
792 | } | |
793 | ||
794 | di->ccm.wait_cnt = 0; | |
795 | ||
796 | if ((di->batt_data.inst_curr > di->ccm.original_iset)) { | |
797 | dev_dbg(di->dev, " Maximization Ibat (%dmA) too high" | |
798 | " (limit %dmA) (current iset: %dmA)!\n", | |
799 | di->batt_data.inst_curr, di->ccm.original_iset, | |
800 | di->ccm.current_iset); | |
801 | ||
802 | if (di->ccm.current_iset == di->ccm.original_iset) | |
803 | return MAXIM_RET_NOACTION; | |
804 | ||
b0284de0 | 805 | di->ccm.condition_cnt = di->bm->maxi->wait_cycles; |
1668f811 AM |
806 | di->ccm.current_iset = di->ccm.original_iset; |
807 | di->ccm.level = 0; | |
808 | ||
809 | return MAXIM_RET_IBAT_TOO_HIGH; | |
810 | } | |
811 | ||
812 | if (delta_i > di->ccm.test_delta_i && | |
813 | (di->ccm.current_iset + di->ccm.test_delta_i) < | |
814 | di->ccm.max_current) { | |
815 | if (di->ccm.condition_cnt-- == 0) { | |
816 | /* Increse the iset with cco.test_delta_i */ | |
b0284de0 | 817 | di->ccm.condition_cnt = di->bm->maxi->wait_cycles; |
1668f811 AM |
818 | di->ccm.current_iset += di->ccm.test_delta_i; |
819 | di->ccm.level++; | |
820 | dev_dbg(di->dev, " Maximization needed, increase" | |
821 | " with %d mA to %dmA (Optimal ibat: %d)" | |
822 | " Level %d\n", | |
823 | di->ccm.test_delta_i, | |
824 | di->ccm.current_iset, | |
825 | di->ccm.original_iset, | |
826 | di->ccm.level); | |
827 | return MAXIM_RET_CHANGE; | |
828 | } else { | |
829 | return MAXIM_RET_NOACTION; | |
830 | } | |
831 | } else { | |
b0284de0 | 832 | di->ccm.condition_cnt = di->bm->maxi->wait_cycles; |
1668f811 AM |
833 | return MAXIM_RET_NOACTION; |
834 | } | |
835 | } | |
836 | ||
837 | static void handle_maxim_chg_curr(struct abx500_chargalg *di) | |
838 | { | |
839 | enum maxim_ret ret; | |
840 | int result; | |
841 | ||
842 | ret = abx500_chargalg_chg_curr_maxim(di); | |
843 | switch (ret) { | |
844 | case MAXIM_RET_CHANGE: | |
845 | result = abx500_chargalg_update_chg_curr(di, | |
846 | di->ccm.current_iset); | |
847 | if (result) | |
848 | dev_err(di->dev, "failed to set chg curr\n"); | |
849 | break; | |
850 | case MAXIM_RET_IBAT_TOO_HIGH: | |
851 | result = abx500_chargalg_update_chg_curr(di, | |
b0284de0 | 852 | di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); |
1668f811 AM |
853 | if (result) |
854 | dev_err(di->dev, "failed to set chg curr\n"); | |
855 | break; | |
856 | ||
857 | case MAXIM_RET_NOACTION: | |
858 | default: | |
859 | /* Do nothing..*/ | |
860 | break; | |
861 | } | |
862 | } | |
863 | ||
864 | static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) | |
865 | { | |
866 | struct power_supply *psy; | |
867 | struct power_supply *ext; | |
868 | struct abx500_chargalg *di; | |
869 | union power_supply_propval ret; | |
870 | int i, j; | |
871 | bool psy_found = false; | |
ea402401 | 872 | bool capacity_updated = false; |
1668f811 AM |
873 | |
874 | psy = (struct power_supply *)data; | |
875 | ext = dev_get_drvdata(dev); | |
876 | di = to_abx500_chargalg_device_info(psy); | |
877 | /* For all psy where the driver name appears in any supplied_to */ | |
878 | for (i = 0; i < ext->num_supplicants; i++) { | |
879 | if (!strcmp(ext->supplied_to[i], psy->name)) | |
880 | psy_found = true; | |
881 | } | |
882 | if (!psy_found) | |
883 | return 0; | |
884 | ||
ea402401 MC |
885 | /* |
886 | * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its | |
887 | * property because of handling that sysfs entry on its own, this is | |
888 | * the place to get the battery capacity. | |
889 | */ | |
890 | if (!ext->get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) { | |
891 | di->batt_data.percent = ret.intval; | |
892 | capacity_updated = true; | |
893 | } | |
894 | ||
1668f811 AM |
895 | /* Go through all properties for the psy */ |
896 | for (j = 0; j < ext->num_properties; j++) { | |
897 | enum power_supply_property prop; | |
898 | prop = ext->properties[j]; | |
899 | ||
900 | /* Initialize chargers if not already done */ | |
901 | if (!di->ac_chg && | |
902 | ext->type == POWER_SUPPLY_TYPE_MAINS) | |
903 | di->ac_chg = psy_to_ux500_charger(ext); | |
904 | else if (!di->usb_chg && | |
905 | ext->type == POWER_SUPPLY_TYPE_USB) | |
906 | di->usb_chg = psy_to_ux500_charger(ext); | |
907 | ||
908 | if (ext->get_property(ext, prop, &ret)) | |
909 | continue; | |
910 | switch (prop) { | |
911 | case POWER_SUPPLY_PROP_PRESENT: | |
912 | switch (ext->type) { | |
913 | case POWER_SUPPLY_TYPE_BATTERY: | |
914 | /* Battery present */ | |
915 | if (ret.intval) | |
916 | di->events.batt_rem = false; | |
917 | /* Battery removed */ | |
918 | else | |
919 | di->events.batt_rem = true; | |
920 | break; | |
921 | case POWER_SUPPLY_TYPE_MAINS: | |
922 | /* AC disconnected */ | |
923 | if (!ret.intval && | |
924 | (di->chg_info.conn_chg & AC_CHG)) { | |
925 | di->chg_info.prev_conn_chg = | |
926 | di->chg_info.conn_chg; | |
927 | di->chg_info.conn_chg &= ~AC_CHG; | |
928 | } | |
929 | /* AC connected */ | |
930 | else if (ret.intval && | |
931 | !(di->chg_info.conn_chg & AC_CHG)) { | |
932 | di->chg_info.prev_conn_chg = | |
933 | di->chg_info.conn_chg; | |
934 | di->chg_info.conn_chg |= AC_CHG; | |
935 | } | |
936 | break; | |
937 | case POWER_SUPPLY_TYPE_USB: | |
938 | /* USB disconnected */ | |
939 | if (!ret.intval && | |
940 | (di->chg_info.conn_chg & USB_CHG)) { | |
941 | di->chg_info.prev_conn_chg = | |
942 | di->chg_info.conn_chg; | |
943 | di->chg_info.conn_chg &= ~USB_CHG; | |
944 | } | |
945 | /* USB connected */ | |
946 | else if (ret.intval && | |
947 | !(di->chg_info.conn_chg & USB_CHG)) { | |
948 | di->chg_info.prev_conn_chg = | |
949 | di->chg_info.conn_chg; | |
950 | di->chg_info.conn_chg |= USB_CHG; | |
951 | } | |
952 | break; | |
953 | default: | |
954 | break; | |
955 | } | |
956 | break; | |
957 | ||
958 | case POWER_SUPPLY_PROP_ONLINE: | |
959 | switch (ext->type) { | |
960 | case POWER_SUPPLY_TYPE_BATTERY: | |
961 | break; | |
962 | case POWER_SUPPLY_TYPE_MAINS: | |
963 | /* AC offline */ | |
964 | if (!ret.intval && | |
965 | (di->chg_info.online_chg & AC_CHG)) { | |
966 | di->chg_info.prev_online_chg = | |
967 | di->chg_info.online_chg; | |
968 | di->chg_info.online_chg &= ~AC_CHG; | |
969 | } | |
970 | /* AC online */ | |
971 | else if (ret.intval && | |
972 | !(di->chg_info.online_chg & AC_CHG)) { | |
973 | di->chg_info.prev_online_chg = | |
974 | di->chg_info.online_chg; | |
975 | di->chg_info.online_chg |= AC_CHG; | |
976 | queue_delayed_work(di->chargalg_wq, | |
977 | &di->chargalg_wd_work, 0); | |
978 | } | |
979 | break; | |
980 | case POWER_SUPPLY_TYPE_USB: | |
981 | /* USB offline */ | |
982 | if (!ret.intval && | |
983 | (di->chg_info.online_chg & USB_CHG)) { | |
984 | di->chg_info.prev_online_chg = | |
985 | di->chg_info.online_chg; | |
986 | di->chg_info.online_chg &= ~USB_CHG; | |
987 | } | |
988 | /* USB online */ | |
989 | else if (ret.intval && | |
990 | !(di->chg_info.online_chg & USB_CHG)) { | |
991 | di->chg_info.prev_online_chg = | |
992 | di->chg_info.online_chg; | |
993 | di->chg_info.online_chg |= USB_CHG; | |
994 | queue_delayed_work(di->chargalg_wq, | |
995 | &di->chargalg_wd_work, 0); | |
996 | } | |
997 | break; | |
998 | default: | |
999 | break; | |
1000 | } | |
1001 | break; | |
1002 | ||
1003 | case POWER_SUPPLY_PROP_HEALTH: | |
1004 | switch (ext->type) { | |
1005 | case POWER_SUPPLY_TYPE_BATTERY: | |
1006 | break; | |
1007 | case POWER_SUPPLY_TYPE_MAINS: | |
1008 | switch (ret.intval) { | |
1009 | case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: | |
1010 | di->events.mainextchnotok = true; | |
1011 | di->events.main_thermal_prot = false; | |
1012 | di->events.main_ovv = false; | |
1013 | di->events.ac_wd_expired = false; | |
1014 | break; | |
1015 | case POWER_SUPPLY_HEALTH_DEAD: | |
1016 | di->events.ac_wd_expired = true; | |
1017 | di->events.mainextchnotok = false; | |
1018 | di->events.main_ovv = false; | |
1019 | di->events.main_thermal_prot = false; | |
1020 | break; | |
1021 | case POWER_SUPPLY_HEALTH_COLD: | |
1022 | case POWER_SUPPLY_HEALTH_OVERHEAT: | |
1023 | di->events.main_thermal_prot = true; | |
1024 | di->events.mainextchnotok = false; | |
1025 | di->events.main_ovv = false; | |
1026 | di->events.ac_wd_expired = false; | |
1027 | break; | |
1028 | case POWER_SUPPLY_HEALTH_OVERVOLTAGE: | |
1029 | di->events.main_ovv = true; | |
1030 | di->events.mainextchnotok = false; | |
1031 | di->events.main_thermal_prot = false; | |
1032 | di->events.ac_wd_expired = false; | |
1033 | break; | |
1034 | case POWER_SUPPLY_HEALTH_GOOD: | |
1035 | di->events.main_thermal_prot = false; | |
1036 | di->events.mainextchnotok = false; | |
1037 | di->events.main_ovv = false; | |
1038 | di->events.ac_wd_expired = false; | |
1039 | break; | |
1040 | default: | |
1041 | break; | |
1042 | } | |
1043 | break; | |
1044 | ||
1045 | case POWER_SUPPLY_TYPE_USB: | |
1046 | switch (ret.intval) { | |
1047 | case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: | |
1048 | di->events.usbchargernotok = true; | |
1049 | di->events.usb_thermal_prot = false; | |
1050 | di->events.vbus_ovv = false; | |
1051 | di->events.usb_wd_expired = false; | |
1052 | break; | |
1053 | case POWER_SUPPLY_HEALTH_DEAD: | |
1054 | di->events.usb_wd_expired = true; | |
1055 | di->events.usbchargernotok = false; | |
1056 | di->events.usb_thermal_prot = false; | |
1057 | di->events.vbus_ovv = false; | |
1058 | break; | |
1059 | case POWER_SUPPLY_HEALTH_COLD: | |
1060 | case POWER_SUPPLY_HEALTH_OVERHEAT: | |
1061 | di->events.usb_thermal_prot = true; | |
1062 | di->events.usbchargernotok = false; | |
1063 | di->events.vbus_ovv = false; | |
1064 | di->events.usb_wd_expired = false; | |
1065 | break; | |
1066 | case POWER_SUPPLY_HEALTH_OVERVOLTAGE: | |
1067 | di->events.vbus_ovv = true; | |
1068 | di->events.usbchargernotok = false; | |
1069 | di->events.usb_thermal_prot = false; | |
1070 | di->events.usb_wd_expired = false; | |
1071 | break; | |
1072 | case POWER_SUPPLY_HEALTH_GOOD: | |
1073 | di->events.usbchargernotok = false; | |
1074 | di->events.usb_thermal_prot = false; | |
1075 | di->events.vbus_ovv = false; | |
1076 | di->events.usb_wd_expired = false; | |
1077 | break; | |
1078 | default: | |
1079 | break; | |
1080 | } | |
1081 | default: | |
1082 | break; | |
1083 | } | |
1084 | break; | |
1085 | ||
1086 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
1087 | switch (ext->type) { | |
1088 | case POWER_SUPPLY_TYPE_BATTERY: | |
1089 | di->batt_data.volt = ret.intval / 1000; | |
1090 | break; | |
1091 | case POWER_SUPPLY_TYPE_MAINS: | |
1092 | di->chg_info.ac_volt = ret.intval / 1000; | |
1093 | break; | |
1094 | case POWER_SUPPLY_TYPE_USB: | |
1095 | di->chg_info.usb_volt = ret.intval / 1000; | |
1096 | break; | |
1097 | default: | |
1098 | break; | |
1099 | } | |
1100 | break; | |
1101 | ||
1102 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: | |
1103 | switch (ext->type) { | |
1104 | case POWER_SUPPLY_TYPE_MAINS: | |
1105 | /* AVG is used to indicate when we are | |
1106 | * in CV mode */ | |
1107 | if (ret.intval) | |
1108 | di->events.ac_cv_active = true; | |
1109 | else | |
1110 | di->events.ac_cv_active = false; | |
1111 | ||
1112 | break; | |
1113 | case POWER_SUPPLY_TYPE_USB: | |
1114 | /* AVG is used to indicate when we are | |
1115 | * in CV mode */ | |
1116 | if (ret.intval) | |
1117 | di->events.usb_cv_active = true; | |
1118 | else | |
1119 | di->events.usb_cv_active = false; | |
1120 | ||
1121 | break; | |
1122 | default: | |
1123 | break; | |
1124 | } | |
1125 | break; | |
1126 | ||
1127 | case POWER_SUPPLY_PROP_TECHNOLOGY: | |
1128 | switch (ext->type) { | |
1129 | case POWER_SUPPLY_TYPE_BATTERY: | |
1130 | if (ret.intval) | |
1131 | di->events.batt_unknown = false; | |
1132 | else | |
1133 | di->events.batt_unknown = true; | |
1134 | ||
1135 | break; | |
1136 | default: | |
1137 | break; | |
1138 | } | |
1139 | break; | |
1140 | ||
1141 | case POWER_SUPPLY_PROP_TEMP: | |
1142 | di->batt_data.temp = ret.intval / 10; | |
1143 | break; | |
1144 | ||
1145 | case POWER_SUPPLY_PROP_CURRENT_NOW: | |
1146 | switch (ext->type) { | |
1147 | case POWER_SUPPLY_TYPE_MAINS: | |
1148 | di->chg_info.ac_curr = | |
1149 | ret.intval / 1000; | |
1150 | break; | |
1151 | case POWER_SUPPLY_TYPE_USB: | |
1152 | di->chg_info.usb_curr = | |
1153 | ret.intval / 1000; | |
1154 | break; | |
1155 | case POWER_SUPPLY_TYPE_BATTERY: | |
1156 | di->batt_data.inst_curr = ret.intval / 1000; | |
1157 | break; | |
1158 | default: | |
1159 | break; | |
1160 | } | |
1161 | break; | |
1162 | ||
1163 | case POWER_SUPPLY_PROP_CURRENT_AVG: | |
1164 | switch (ext->type) { | |
1165 | case POWER_SUPPLY_TYPE_BATTERY: | |
1166 | di->batt_data.avg_curr = ret.intval / 1000; | |
1167 | break; | |
1168 | case POWER_SUPPLY_TYPE_USB: | |
1169 | if (ret.intval) | |
1170 | di->events.vbus_collapsed = true; | |
1171 | else | |
1172 | di->events.vbus_collapsed = false; | |
1173 | break; | |
1174 | default: | |
1175 | break; | |
1176 | } | |
1177 | break; | |
1178 | case POWER_SUPPLY_PROP_CAPACITY: | |
ea402401 MC |
1179 | if (!capacity_updated) |
1180 | di->batt_data.percent = ret.intval; | |
1668f811 AM |
1181 | break; |
1182 | default: | |
1183 | break; | |
1184 | } | |
1185 | } | |
1186 | return 0; | |
1187 | } | |
1188 | ||
1189 | /** | |
1190 | * abx500_chargalg_external_power_changed() - callback for power supply changes | |
1191 | * @psy: pointer to the structure power_supply | |
1192 | * | |
1193 | * This function is the entry point of the pointer external_power_changed | |
1194 | * of the structure power_supply. | |
1195 | * This function gets executed when there is a change in any external power | |
1196 | * supply that this driver needs to be notified of. | |
1197 | */ | |
1198 | static void abx500_chargalg_external_power_changed(struct power_supply *psy) | |
1199 | { | |
1200 | struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy); | |
1201 | ||
1202 | /* | |
1203 | * Trigger execution of the algorithm instantly and read | |
1204 | * all power_supply properties there instead | |
1205 | */ | |
1206 | queue_work(di->chargalg_wq, &di->chargalg_work); | |
1207 | } | |
1208 | ||
1209 | /** | |
1210 | * abx500_chargalg_algorithm() - Main function for the algorithm | |
1211 | * @di: pointer to the abx500_chargalg structure | |
1212 | * | |
1213 | * This is the main control function for the charging algorithm. | |
1214 | * It is called periodically or when something happens that will | |
1215 | * trigger a state change | |
1216 | */ | |
1217 | static void abx500_chargalg_algorithm(struct abx500_chargalg *di) | |
1218 | { | |
1219 | int charger_status; | |
1220 | ||
1221 | /* Collect data from all power_supply class devices */ | |
1222 | class_for_each_device(power_supply_class, NULL, | |
1223 | &di->chargalg_psy, abx500_chargalg_get_ext_psy_data); | |
1224 | ||
1225 | abx500_chargalg_end_of_charge(di); | |
1226 | abx500_chargalg_check_temp(di); | |
1227 | abx500_chargalg_check_charger_voltage(di); | |
1228 | ||
1229 | charger_status = abx500_chargalg_check_charger_connection(di); | |
1230 | /* | |
1231 | * First check if we have a charger connected. | |
1232 | * Also we don't allow charging of unknown batteries if configured | |
1233 | * this way | |
1234 | */ | |
1235 | if (!charger_status || | |
b0284de0 | 1236 | (di->events.batt_unknown && !di->bm->chg_unknown_bat)) { |
1668f811 AM |
1237 | if (di->charge_state != STATE_HANDHELD) { |
1238 | di->events.safety_timer_expired = false; | |
1239 | abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); | |
1240 | } | |
1241 | } | |
1242 | ||
1243 | /* If suspended, we should not continue checking the flags */ | |
1244 | else if (di->charge_state == STATE_SUSPENDED_INIT || | |
1245 | di->charge_state == STATE_SUSPENDED) { | |
1246 | /* We don't do anything here, just don,t continue */ | |
1247 | } | |
1248 | ||
1249 | /* Safety timer expiration */ | |
1250 | else if (di->events.safety_timer_expired) { | |
1251 | if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED) | |
1252 | abx500_chargalg_state_to(di, | |
1253 | STATE_SAFETY_TIMER_EXPIRED_INIT); | |
1254 | } | |
1255 | /* | |
1256 | * Check if any interrupts has occured | |
1257 | * that will prevent us from charging | |
1258 | */ | |
1259 | ||
1260 | /* Battery removed */ | |
1261 | else if (di->events.batt_rem) { | |
1262 | if (di->charge_state != STATE_BATT_REMOVED) | |
1263 | abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT); | |
1264 | } | |
1265 | /* Main or USB charger not ok. */ | |
1266 | else if (di->events.mainextchnotok || di->events.usbchargernotok) { | |
1267 | /* | |
1268 | * If vbus_collapsed is set, we have to lower the charger | |
1269 | * current, which is done in the normal state below | |
1270 | */ | |
1271 | if (di->charge_state != STATE_CHG_NOT_OK && | |
1272 | !di->events.vbus_collapsed) | |
1273 | abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT); | |
1274 | } | |
1275 | /* VBUS, Main or VBAT OVV. */ | |
1276 | else if (di->events.vbus_ovv || | |
1277 | di->events.main_ovv || | |
1278 | di->events.batt_ovv || | |
1279 | !di->chg_info.usb_chg_ok || | |
1280 | !di->chg_info.ac_chg_ok) { | |
1281 | if (di->charge_state != STATE_OVV_PROTECT) | |
1282 | abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT); | |
1283 | } | |
1284 | /* USB Thermal, stop charging */ | |
1285 | else if (di->events.main_thermal_prot || | |
1286 | di->events.usb_thermal_prot) { | |
1287 | if (di->charge_state != STATE_HW_TEMP_PROTECT) | |
1288 | abx500_chargalg_state_to(di, | |
1289 | STATE_HW_TEMP_PROTECT_INIT); | |
1290 | } | |
1291 | /* Battery temp over/under */ | |
1292 | else if (di->events.btemp_underover) { | |
1293 | if (di->charge_state != STATE_TEMP_UNDEROVER) | |
1294 | abx500_chargalg_state_to(di, | |
1295 | STATE_TEMP_UNDEROVER_INIT); | |
1296 | } | |
1297 | /* Watchdog expired */ | |
1298 | else if (di->events.ac_wd_expired || | |
1299 | di->events.usb_wd_expired) { | |
1300 | if (di->charge_state != STATE_WD_EXPIRED) | |
1301 | abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT); | |
1302 | } | |
1303 | /* Battery temp high/low */ | |
1304 | else if (di->events.btemp_lowhigh) { | |
1305 | if (di->charge_state != STATE_TEMP_LOWHIGH) | |
1306 | abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT); | |
1307 | } | |
1308 | ||
1309 | dev_dbg(di->dev, | |
1310 | "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d " | |
1311 | "State %s Active_chg %d Chg_status %d AC %d USB %d " | |
1312 | "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d " | |
1313 | "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n", | |
1314 | di->batt_data.volt, | |
1315 | di->batt_data.avg_curr, | |
1316 | di->batt_data.inst_curr, | |
1317 | di->batt_data.temp, | |
1318 | di->batt_data.percent, | |
1319 | di->maintenance_chg, | |
1320 | states[di->charge_state], | |
1321 | di->chg_info.charger_type, | |
1322 | di->charge_status, | |
1323 | di->chg_info.conn_chg & AC_CHG, | |
1324 | di->chg_info.conn_chg & USB_CHG, | |
1325 | di->chg_info.online_chg & AC_CHG, | |
1326 | di->chg_info.online_chg & USB_CHG, | |
1327 | di->events.ac_cv_active, | |
1328 | di->events.usb_cv_active, | |
1329 | di->chg_info.ac_curr, | |
1330 | di->chg_info.usb_curr, | |
1331 | di->chg_info.ac_vset, | |
1332 | di->chg_info.ac_iset, | |
1333 | di->chg_info.usb_vset, | |
1334 | di->chg_info.usb_iset); | |
1335 | ||
1336 | switch (di->charge_state) { | |
1337 | case STATE_HANDHELD_INIT: | |
1338 | abx500_chargalg_stop_charging(di); | |
1339 | di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; | |
1340 | abx500_chargalg_state_to(di, STATE_HANDHELD); | |
1341 | /* Intentional fallthrough */ | |
1342 | ||
1343 | case STATE_HANDHELD: | |
1344 | break; | |
1345 | ||
1346 | case STATE_SUSPENDED_INIT: | |
1347 | if (di->susp_status.ac_suspended) | |
1348 | abx500_chargalg_ac_en(di, false, 0, 0); | |
1349 | if (di->susp_status.usb_suspended) | |
1350 | abx500_chargalg_usb_en(di, false, 0, 0); | |
1351 | abx500_chargalg_stop_safety_timer(di); | |
1352 | abx500_chargalg_stop_maintenance_timer(di); | |
1353 | di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
1354 | di->maintenance_chg = false; | |
1355 | abx500_chargalg_state_to(di, STATE_SUSPENDED); | |
1356 | power_supply_changed(&di->chargalg_psy); | |
1357 | /* Intentional fallthrough */ | |
1358 | ||
1359 | case STATE_SUSPENDED: | |
1360 | /* CHARGING is suspended */ | |
1361 | break; | |
1362 | ||
1363 | case STATE_BATT_REMOVED_INIT: | |
1364 | abx500_chargalg_stop_charging(di); | |
1365 | abx500_chargalg_state_to(di, STATE_BATT_REMOVED); | |
1366 | /* Intentional fallthrough */ | |
1367 | ||
1368 | case STATE_BATT_REMOVED: | |
1369 | if (!di->events.batt_rem) | |
1370 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1371 | break; | |
1372 | ||
1373 | case STATE_HW_TEMP_PROTECT_INIT: | |
1374 | abx500_chargalg_stop_charging(di); | |
1375 | abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT); | |
1376 | /* Intentional fallthrough */ | |
1377 | ||
1378 | case STATE_HW_TEMP_PROTECT: | |
1379 | if (!di->events.main_thermal_prot && | |
1380 | !di->events.usb_thermal_prot) | |
1381 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1382 | break; | |
1383 | ||
1384 | case STATE_OVV_PROTECT_INIT: | |
1385 | abx500_chargalg_stop_charging(di); | |
1386 | abx500_chargalg_state_to(di, STATE_OVV_PROTECT); | |
1387 | /* Intentional fallthrough */ | |
1388 | ||
1389 | case STATE_OVV_PROTECT: | |
1390 | if (!di->events.vbus_ovv && | |
1391 | !di->events.main_ovv && | |
1392 | !di->events.batt_ovv && | |
1393 | di->chg_info.usb_chg_ok && | |
1394 | di->chg_info.ac_chg_ok) | |
1395 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1396 | break; | |
1397 | ||
1398 | case STATE_CHG_NOT_OK_INIT: | |
1399 | abx500_chargalg_stop_charging(di); | |
1400 | abx500_chargalg_state_to(di, STATE_CHG_NOT_OK); | |
1401 | /* Intentional fallthrough */ | |
1402 | ||
1403 | case STATE_CHG_NOT_OK: | |
1404 | if (!di->events.mainextchnotok && | |
1405 | !di->events.usbchargernotok) | |
1406 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1407 | break; | |
1408 | ||
1409 | case STATE_SAFETY_TIMER_EXPIRED_INIT: | |
1410 | abx500_chargalg_stop_charging(di); | |
1411 | abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED); | |
1412 | /* Intentional fallthrough */ | |
1413 | ||
1414 | case STATE_SAFETY_TIMER_EXPIRED: | |
1415 | /* We exit this state when charger is removed */ | |
1416 | break; | |
1417 | ||
1418 | case STATE_NORMAL_INIT: | |
1419 | abx500_chargalg_start_charging(di, | |
b0284de0 LJ |
1420 | di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, |
1421 | di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); | |
1668f811 AM |
1422 | abx500_chargalg_state_to(di, STATE_NORMAL); |
1423 | abx500_chargalg_start_safety_timer(di); | |
1424 | abx500_chargalg_stop_maintenance_timer(di); | |
1425 | init_maxim_chg_curr(di); | |
1426 | di->charge_status = POWER_SUPPLY_STATUS_CHARGING; | |
1427 | di->eoc_cnt = 0; | |
1428 | di->maintenance_chg = false; | |
1429 | power_supply_changed(&di->chargalg_psy); | |
1430 | ||
1431 | break; | |
1432 | ||
1433 | case STATE_NORMAL: | |
1434 | handle_maxim_chg_curr(di); | |
1435 | if (di->charge_status == POWER_SUPPLY_STATUS_FULL && | |
1436 | di->maintenance_chg) { | |
b0284de0 | 1437 | if (di->bm->no_maintenance) |
1668f811 AM |
1438 | abx500_chargalg_state_to(di, |
1439 | STATE_WAIT_FOR_RECHARGE_INIT); | |
1440 | else | |
1441 | abx500_chargalg_state_to(di, | |
1442 | STATE_MAINTENANCE_A_INIT); | |
1443 | } | |
1444 | break; | |
1445 | ||
1446 | /* This state will be used when the maintenance state is disabled */ | |
1447 | case STATE_WAIT_FOR_RECHARGE_INIT: | |
1448 | abx500_chargalg_hold_charging(di); | |
1449 | abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); | |
1668f811 AM |
1450 | /* Intentional fallthrough */ |
1451 | ||
1452 | case STATE_WAIT_FOR_RECHARGE: | |
ea402401 MC |
1453 | if (di->batt_data.percent <= |
1454 | di->bm->bat_type[di->bm->batt_id]. | |
1455 | recharge_cap) | |
1456 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1668f811 AM |
1457 | break; |
1458 | ||
1459 | case STATE_MAINTENANCE_A_INIT: | |
1460 | abx500_chargalg_stop_safety_timer(di); | |
1461 | abx500_chargalg_start_maintenance_timer(di, | |
b0284de0 LJ |
1462 | di->bm->bat_type[ |
1463 | di->bm->batt_id].maint_a_chg_timer_h); | |
1668f811 | 1464 | abx500_chargalg_start_charging(di, |
b0284de0 LJ |
1465 | di->bm->bat_type[ |
1466 | di->bm->batt_id].maint_a_vol_lvl, | |
1467 | di->bm->bat_type[ | |
1468 | di->bm->batt_id].maint_a_cur_lvl); | |
1668f811 AM |
1469 | abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); |
1470 | power_supply_changed(&di->chargalg_psy); | |
1471 | /* Intentional fallthrough*/ | |
1472 | ||
1473 | case STATE_MAINTENANCE_A: | |
1474 | if (di->events.maintenance_timer_expired) { | |
1475 | abx500_chargalg_stop_maintenance_timer(di); | |
1476 | abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT); | |
1477 | } | |
1478 | break; | |
1479 | ||
1480 | case STATE_MAINTENANCE_B_INIT: | |
1481 | abx500_chargalg_start_maintenance_timer(di, | |
b0284de0 LJ |
1482 | di->bm->bat_type[ |
1483 | di->bm->batt_id].maint_b_chg_timer_h); | |
1668f811 | 1484 | abx500_chargalg_start_charging(di, |
b0284de0 LJ |
1485 | di->bm->bat_type[ |
1486 | di->bm->batt_id].maint_b_vol_lvl, | |
1487 | di->bm->bat_type[ | |
1488 | di->bm->batt_id].maint_b_cur_lvl); | |
1668f811 AM |
1489 | abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); |
1490 | power_supply_changed(&di->chargalg_psy); | |
1491 | /* Intentional fallthrough*/ | |
1492 | ||
1493 | case STATE_MAINTENANCE_B: | |
1494 | if (di->events.maintenance_timer_expired) { | |
1495 | abx500_chargalg_stop_maintenance_timer(di); | |
1496 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1497 | } | |
1498 | break; | |
1499 | ||
1500 | case STATE_TEMP_LOWHIGH_INIT: | |
1501 | abx500_chargalg_start_charging(di, | |
b0284de0 LJ |
1502 | di->bm->bat_type[ |
1503 | di->bm->batt_id].low_high_vol_lvl, | |
1504 | di->bm->bat_type[ | |
1505 | di->bm->batt_id].low_high_cur_lvl); | |
1668f811 AM |
1506 | abx500_chargalg_stop_maintenance_timer(di); |
1507 | di->charge_status = POWER_SUPPLY_STATUS_CHARGING; | |
1508 | abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); | |
1509 | power_supply_changed(&di->chargalg_psy); | |
1510 | /* Intentional fallthrough */ | |
1511 | ||
1512 | case STATE_TEMP_LOWHIGH: | |
1513 | if (!di->events.btemp_lowhigh) | |
1514 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1515 | break; | |
1516 | ||
1517 | case STATE_WD_EXPIRED_INIT: | |
1518 | abx500_chargalg_stop_charging(di); | |
1519 | abx500_chargalg_state_to(di, STATE_WD_EXPIRED); | |
1520 | /* Intentional fallthrough */ | |
1521 | ||
1522 | case STATE_WD_EXPIRED: | |
1523 | if (!di->events.ac_wd_expired && | |
1524 | !di->events.usb_wd_expired) | |
1525 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1526 | break; | |
1527 | ||
1528 | case STATE_TEMP_UNDEROVER_INIT: | |
1529 | abx500_chargalg_stop_charging(di); | |
1530 | abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER); | |
1531 | /* Intentional fallthrough */ | |
1532 | ||
1533 | case STATE_TEMP_UNDEROVER: | |
1534 | if (!di->events.btemp_underover) | |
1535 | abx500_chargalg_state_to(di, STATE_NORMAL_INIT); | |
1536 | break; | |
1537 | } | |
1538 | ||
1539 | /* Start charging directly if the new state is a charge state */ | |
1540 | if (di->charge_state == STATE_NORMAL_INIT || | |
1541 | di->charge_state == STATE_MAINTENANCE_A_INIT || | |
1542 | di->charge_state == STATE_MAINTENANCE_B_INIT) | |
1543 | queue_work(di->chargalg_wq, &di->chargalg_work); | |
1544 | } | |
1545 | ||
1546 | /** | |
1547 | * abx500_chargalg_periodic_work() - Periodic work for the algorithm | |
1548 | * @work: pointer to the work_struct structure | |
1549 | * | |
1550 | * Work queue function for the charging algorithm | |
1551 | */ | |
1552 | static void abx500_chargalg_periodic_work(struct work_struct *work) | |
1553 | { | |
1554 | struct abx500_chargalg *di = container_of(work, | |
1555 | struct abx500_chargalg, chargalg_periodic_work.work); | |
1556 | ||
1557 | abx500_chargalg_algorithm(di); | |
1558 | ||
1559 | /* | |
1560 | * If a charger is connected then the battery has to be monitored | |
1561 | * frequently, else the work can be delayed. | |
1562 | */ | |
1563 | if (di->chg_info.conn_chg) | |
1564 | queue_delayed_work(di->chargalg_wq, | |
1565 | &di->chargalg_periodic_work, | |
b0284de0 | 1566 | di->bm->interval_charging * HZ); |
1668f811 AM |
1567 | else |
1568 | queue_delayed_work(di->chargalg_wq, | |
1569 | &di->chargalg_periodic_work, | |
b0284de0 | 1570 | di->bm->interval_not_charging * HZ); |
1668f811 AM |
1571 | } |
1572 | ||
1573 | /** | |
1574 | * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog | |
1575 | * @work: pointer to the work_struct structure | |
1576 | * | |
1577 | * Work queue function for kicking the charger watchdog | |
1578 | */ | |
1579 | static void abx500_chargalg_wd_work(struct work_struct *work) | |
1580 | { | |
1581 | int ret; | |
1582 | struct abx500_chargalg *di = container_of(work, | |
1583 | struct abx500_chargalg, chargalg_wd_work.work); | |
1584 | ||
1585 | dev_dbg(di->dev, "abx500_chargalg_wd_work\n"); | |
1586 | ||
1587 | ret = abx500_chargalg_kick_watchdog(di); | |
1588 | if (ret < 0) | |
1589 | dev_err(di->dev, "failed to kick watchdog\n"); | |
1590 | ||
1591 | queue_delayed_work(di->chargalg_wq, | |
1592 | &di->chargalg_wd_work, CHG_WD_INTERVAL); | |
1593 | } | |
1594 | ||
1595 | /** | |
1596 | * abx500_chargalg_work() - Work to run the charging algorithm instantly | |
1597 | * @work: pointer to the work_struct structure | |
1598 | * | |
1599 | * Work queue function for calling the charging algorithm | |
1600 | */ | |
1601 | static void abx500_chargalg_work(struct work_struct *work) | |
1602 | { | |
1603 | struct abx500_chargalg *di = container_of(work, | |
1604 | struct abx500_chargalg, chargalg_work); | |
1605 | ||
1606 | abx500_chargalg_algorithm(di); | |
1607 | } | |
1608 | ||
1609 | /** | |
1610 | * abx500_chargalg_get_property() - get the chargalg properties | |
1611 | * @psy: pointer to the power_supply structure | |
1612 | * @psp: pointer to the power_supply_property structure | |
1613 | * @val: pointer to the power_supply_propval union | |
1614 | * | |
1615 | * This function gets called when an application tries to get the | |
1616 | * chargalg properties by reading the sysfs files. | |
1617 | * status: charging/discharging/full/unknown | |
1618 | * health: health of the battery | |
1619 | * Returns error code in case of failure else 0 on success | |
1620 | */ | |
1621 | static int abx500_chargalg_get_property(struct power_supply *psy, | |
1622 | enum power_supply_property psp, | |
1623 | union power_supply_propval *val) | |
1624 | { | |
1625 | struct abx500_chargalg *di; | |
1626 | ||
1627 | di = to_abx500_chargalg_device_info(psy); | |
1628 | ||
1629 | switch (psp) { | |
1630 | case POWER_SUPPLY_PROP_STATUS: | |
1631 | val->intval = di->charge_status; | |
1632 | break; | |
1633 | case POWER_SUPPLY_PROP_HEALTH: | |
1634 | if (di->events.batt_ovv) { | |
1635 | val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; | |
1636 | } else if (di->events.btemp_underover) { | |
b0284de0 | 1637 | if (di->batt_data.temp <= di->bm->temp_under) |
1668f811 AM |
1638 | val->intval = POWER_SUPPLY_HEALTH_COLD; |
1639 | else | |
1640 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; | |
d80108fc LJ |
1641 | } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED || |
1642 | di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) { | |
1643 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; | |
1668f811 AM |
1644 | } else { |
1645 | val->intval = POWER_SUPPLY_HEALTH_GOOD; | |
1646 | } | |
1647 | break; | |
1648 | default: | |
1649 | return -EINVAL; | |
1650 | } | |
1651 | return 0; | |
1652 | } | |
1653 | ||
1654 | /* Exposure to the sysfs interface */ | |
1655 | ||
c9ade0fc LJ |
1656 | /** |
1657 | * abx500_chargalg_sysfs_show() - sysfs show operations | |
1658 | * @kobj: pointer to the struct kobject | |
1659 | * @attr: pointer to the struct attribute | |
1660 | * @buf: buffer that holds the parameter to send to userspace | |
1661 | * | |
1662 | * Returns a buffer to be displayed in user space | |
1663 | */ | |
1664 | static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj, | |
1665 | struct attribute *attr, char *buf) | |
1666 | { | |
1667 | struct abx500_chargalg *di = container_of(kobj, | |
1668 | struct abx500_chargalg, chargalg_kobject); | |
1669 | ||
1670 | return sprintf(buf, "%d\n", | |
1671 | di->susp_status.ac_suspended && | |
1672 | di->susp_status.usb_suspended); | |
1673 | } | |
1674 | ||
1668f811 AM |
1675 | /** |
1676 | * abx500_chargalg_sysfs_charger() - sysfs store operations | |
1677 | * @kobj: pointer to the struct kobject | |
1678 | * @attr: pointer to the struct attribute | |
1679 | * @buf: buffer that holds the parameter passed from userspace | |
1680 | * @length: length of the parameter passed | |
1681 | * | |
1682 | * Returns length of the buffer(input taken from user space) on success | |
1683 | * else error code on failure | |
1684 | * The operation to be performed on passing the parameters from the user space. | |
1685 | */ | |
1686 | static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, | |
1687 | struct attribute *attr, const char *buf, size_t length) | |
1688 | { | |
1689 | struct abx500_chargalg *di = container_of(kobj, | |
1690 | struct abx500_chargalg, chargalg_kobject); | |
1691 | long int param; | |
1692 | int ac_usb; | |
1693 | int ret; | |
1694 | char entry = *attr->name; | |
1695 | ||
1696 | switch (entry) { | |
1697 | case 'c': | |
1698 | ret = strict_strtol(buf, 10, ¶m); | |
1699 | if (ret < 0) | |
1700 | return ret; | |
1701 | ||
1702 | ac_usb = param; | |
1703 | switch (ac_usb) { | |
1704 | case 0: | |
1705 | /* Disable charging */ | |
1706 | di->susp_status.ac_suspended = true; | |
1707 | di->susp_status.usb_suspended = true; | |
1708 | di->susp_status.suspended_change = true; | |
1709 | /* Trigger a state change */ | |
1710 | queue_work(di->chargalg_wq, | |
1711 | &di->chargalg_work); | |
1712 | break; | |
1713 | case 1: | |
1714 | /* Enable AC Charging */ | |
1715 | di->susp_status.ac_suspended = false; | |
1716 | di->susp_status.suspended_change = true; | |
1717 | /* Trigger a state change */ | |
1718 | queue_work(di->chargalg_wq, | |
1719 | &di->chargalg_work); | |
1720 | break; | |
1721 | case 2: | |
1722 | /* Enable USB charging */ | |
1723 | di->susp_status.usb_suspended = false; | |
1724 | di->susp_status.suspended_change = true; | |
1725 | /* Trigger a state change */ | |
1726 | queue_work(di->chargalg_wq, | |
1727 | &di->chargalg_work); | |
1728 | break; | |
1729 | default: | |
1730 | dev_info(di->dev, "Wrong input\n" | |
1731 | "Enter 0. Disable AC/USB Charging\n" | |
1732 | "1. Enable AC charging\n" | |
1733 | "2. Enable USB Charging\n"); | |
1734 | }; | |
1735 | break; | |
1736 | }; | |
1737 | return strlen(buf); | |
1738 | } | |
1739 | ||
1740 | static struct attribute abx500_chargalg_en_charger = \ | |
1741 | { | |
1742 | .name = "chargalg", | |
c9ade0fc | 1743 | .mode = S_IRUGO | S_IWUSR, |
1668f811 AM |
1744 | }; |
1745 | ||
1746 | static struct attribute *abx500_chargalg_chg[] = { | |
1747 | &abx500_chargalg_en_charger, | |
1748 | NULL | |
1749 | }; | |
1750 | ||
64eb9b02 | 1751 | static const struct sysfs_ops abx500_chargalg_sysfs_ops = { |
c9ade0fc | 1752 | .show = abx500_chargalg_sysfs_show, |
1668f811 AM |
1753 | .store = abx500_chargalg_sysfs_charger, |
1754 | }; | |
1755 | ||
1756 | static struct kobj_type abx500_chargalg_ktype = { | |
1757 | .sysfs_ops = &abx500_chargalg_sysfs_ops, | |
1758 | .default_attrs = abx500_chargalg_chg, | |
1759 | }; | |
1760 | ||
1761 | /** | |
1762 | * abx500_chargalg_sysfs_exit() - de-init of sysfs entry | |
1763 | * @di: pointer to the struct abx500_chargalg | |
1764 | * | |
1765 | * This function removes the entry in sysfs. | |
1766 | */ | |
1767 | static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di) | |
1768 | { | |
1769 | kobject_del(&di->chargalg_kobject); | |
1770 | } | |
1771 | ||
1772 | /** | |
1773 | * abx500_chargalg_sysfs_init() - init of sysfs entry | |
1774 | * @di: pointer to the struct abx500_chargalg | |
1775 | * | |
1776 | * This function adds an entry in sysfs. | |
1777 | * Returns error code in case of failure else 0(on success) | |
1778 | */ | |
1779 | static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di) | |
1780 | { | |
1781 | int ret = 0; | |
1782 | ||
1783 | ret = kobject_init_and_add(&di->chargalg_kobject, | |
1784 | &abx500_chargalg_ktype, | |
1785 | NULL, "abx500_chargalg"); | |
1786 | if (ret < 0) | |
1787 | dev_err(di->dev, "failed to create sysfs entry\n"); | |
1788 | ||
1789 | return ret; | |
1790 | } | |
1791 | /* Exposure to the sysfs interface <<END>> */ | |
1792 | ||
1793 | #if defined(CONFIG_PM) | |
1794 | static int abx500_chargalg_resume(struct platform_device *pdev) | |
1795 | { | |
1796 | struct abx500_chargalg *di = platform_get_drvdata(pdev); | |
1797 | ||
1798 | /* Kick charger watchdog if charging (any charger online) */ | |
1799 | if (di->chg_info.online_chg) | |
1800 | queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); | |
1801 | ||
1802 | /* | |
1803 | * Run the charging algorithm directly to be sure we don't | |
1804 | * do it too seldom | |
1805 | */ | |
1806 | queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); | |
1807 | ||
1808 | return 0; | |
1809 | } | |
1810 | ||
1811 | static int abx500_chargalg_suspend(struct platform_device *pdev, | |
1812 | pm_message_t state) | |
1813 | { | |
1814 | struct abx500_chargalg *di = platform_get_drvdata(pdev); | |
1815 | ||
1816 | if (di->chg_info.online_chg) | |
1817 | cancel_delayed_work_sync(&di->chargalg_wd_work); | |
1818 | ||
1819 | cancel_delayed_work_sync(&di->chargalg_periodic_work); | |
1820 | ||
1821 | return 0; | |
1822 | } | |
1823 | #else | |
1824 | #define abx500_chargalg_suspend NULL | |
1825 | #define abx500_chargalg_resume NULL | |
1826 | #endif | |
1827 | ||
415ec69f | 1828 | static int abx500_chargalg_remove(struct platform_device *pdev) |
1668f811 AM |
1829 | { |
1830 | struct abx500_chargalg *di = platform_get_drvdata(pdev); | |
1831 | ||
1832 | /* sysfs interface to enable/disbale charging from user space */ | |
1833 | abx500_chargalg_sysfs_exit(di); | |
1834 | ||
1835 | /* Delete the work queue */ | |
1836 | destroy_workqueue(di->chargalg_wq); | |
1837 | ||
1838 | flush_scheduled_work(); | |
1839 | power_supply_unregister(&di->chargalg_psy); | |
1840 | platform_set_drvdata(pdev, NULL); | |
1668f811 AM |
1841 | |
1842 | return 0; | |
1843 | } | |
1844 | ||
a12810ab R |
1845 | static char *supply_interface[] = { |
1846 | "ab8500_fg", | |
1847 | }; | |
1848 | ||
c8afa640 | 1849 | static int abx500_chargalg_probe(struct platform_device *pdev) |
1668f811 | 1850 | { |
a12810ab | 1851 | struct device_node *np = pdev->dev.of_node; |
bdc56b44 | 1852 | struct abx500_bm_data *plat = pdev->dev.platform_data; |
a12810ab | 1853 | struct abx500_chargalg *di; |
1668f811 AM |
1854 | int ret = 0; |
1855 | ||
a12810ab R |
1856 | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
1857 | if (!di) { | |
1858 | dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__); | |
1668f811 | 1859 | return -ENOMEM; |
a12810ab | 1860 | } |
bdc56b44 LJ |
1861 | |
1862 | if (!plat) { | |
1863 | dev_err(&pdev->dev, "no battery management data supplied\n"); | |
1864 | return -EINVAL; | |
1865 | } | |
1866 | di->bm = plat; | |
1867 | ||
1868 | if (np) { | |
1869 | ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); | |
1870 | if (ret) { | |
1871 | dev_err(&pdev->dev, "failed to get battery information\n"); | |
1872 | return ret; | |
a12810ab | 1873 | } |
a12810ab | 1874 | } |
1668f811 AM |
1875 | |
1876 | /* get device struct */ | |
1877 | di->dev = &pdev->dev; | |
1668f811 AM |
1878 | |
1879 | /* chargalg supply */ | |
1880 | di->chargalg_psy.name = "abx500_chargalg"; | |
1881 | di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY; | |
1882 | di->chargalg_psy.properties = abx500_chargalg_props; | |
1883 | di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props); | |
1884 | di->chargalg_psy.get_property = abx500_chargalg_get_property; | |
a12810ab R |
1885 | di->chargalg_psy.supplied_to = supply_interface; |
1886 | di->chargalg_psy.num_supplicants = ARRAY_SIZE(supply_interface), | |
1668f811 AM |
1887 | di->chargalg_psy.external_power_changed = |
1888 | abx500_chargalg_external_power_changed; | |
1889 | ||
1890 | /* Initilialize safety timer */ | |
1891 | init_timer(&di->safety_timer); | |
1892 | di->safety_timer.function = abx500_chargalg_safety_timer_expired; | |
1893 | di->safety_timer.data = (unsigned long) di; | |
1894 | ||
1895 | /* Initilialize maintenance timer */ | |
1896 | init_timer(&di->maintenance_timer); | |
1897 | di->maintenance_timer.function = | |
1898 | abx500_chargalg_maintenance_timer_expired; | |
1899 | di->maintenance_timer.data = (unsigned long) di; | |
1900 | ||
1901 | /* Create a work queue for the chargalg */ | |
1902 | di->chargalg_wq = | |
1903 | create_singlethread_workqueue("abx500_chargalg_wq"); | |
1904 | if (di->chargalg_wq == NULL) { | |
1905 | dev_err(di->dev, "failed to create work queue\n"); | |
a12810ab | 1906 | return -ENOMEM; |
1668f811 AM |
1907 | } |
1908 | ||
1909 | /* Init work for chargalg */ | |
203b42f7 | 1910 | INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work, |
1668f811 | 1911 | abx500_chargalg_periodic_work); |
203b42f7 | 1912 | INIT_DEFERRABLE_WORK(&di->chargalg_wd_work, |
1668f811 AM |
1913 | abx500_chargalg_wd_work); |
1914 | ||
1915 | /* Init work for chargalg */ | |
1916 | INIT_WORK(&di->chargalg_work, abx500_chargalg_work); | |
1917 | ||
1918 | /* To detect charger at startup */ | |
1919 | di->chg_info.prev_conn_chg = -1; | |
1920 | ||
1921 | /* Register chargalg power supply class */ | |
1922 | ret = power_supply_register(di->dev, &di->chargalg_psy); | |
1923 | if (ret) { | |
1924 | dev_err(di->dev, "failed to register chargalg psy\n"); | |
1925 | goto free_chargalg_wq; | |
1926 | } | |
1927 | ||
1928 | platform_set_drvdata(pdev, di); | |
1929 | ||
1930 | /* sysfs interface to enable/disable charging from user space */ | |
1931 | ret = abx500_chargalg_sysfs_init(di); | |
1932 | if (ret) { | |
1933 | dev_err(di->dev, "failed to create sysfs entry\n"); | |
1934 | goto free_psy; | |
1935 | } | |
1936 | ||
1937 | /* Run the charging algorithm */ | |
1938 | queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); | |
1939 | ||
1940 | dev_info(di->dev, "probe success\n"); | |
1941 | return ret; | |
1942 | ||
1943 | free_psy: | |
1944 | power_supply_unregister(&di->chargalg_psy); | |
1945 | free_chargalg_wq: | |
1946 | destroy_workqueue(di->chargalg_wq); | |
1668f811 AM |
1947 | return ret; |
1948 | } | |
1949 | ||
a12810ab R |
1950 | static const struct of_device_id ab8500_chargalg_match[] = { |
1951 | { .compatible = "stericsson,ab8500-chargalg", }, | |
1952 | { }, | |
1953 | }; | |
1954 | ||
1668f811 AM |
1955 | static struct platform_driver abx500_chargalg_driver = { |
1956 | .probe = abx500_chargalg_probe, | |
28ea73f4 | 1957 | .remove = abx500_chargalg_remove, |
1668f811 AM |
1958 | .suspend = abx500_chargalg_suspend, |
1959 | .resume = abx500_chargalg_resume, | |
1960 | .driver = { | |
a12810ab | 1961 | .name = "ab8500-chargalg", |
1668f811 | 1962 | .owner = THIS_MODULE, |
a12810ab | 1963 | .of_match_table = ab8500_chargalg_match, |
1668f811 AM |
1964 | }, |
1965 | }; | |
1966 | ||
1967 | static int __init abx500_chargalg_init(void) | |
1968 | { | |
1969 | return platform_driver_register(&abx500_chargalg_driver); | |
1970 | } | |
1971 | ||
1972 | static void __exit abx500_chargalg_exit(void) | |
1973 | { | |
1974 | platform_driver_unregister(&abx500_chargalg_driver); | |
1975 | } | |
1976 | ||
1977 | module_init(abx500_chargalg_init); | |
1978 | module_exit(abx500_chargalg_exit); | |
1979 | ||
1980 | MODULE_LICENSE("GPL v2"); | |
1981 | MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); | |
1982 | MODULE_ALIAS("platform:abx500-chargalg"); | |
1983 | MODULE_DESCRIPTION("abx500 battery charging algorithm"); |