]>
Commit | Line | Data |
---|---|---|
48618fb4 AB |
1 | /* |
2 | * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge | |
3 | * | |
4 | * Copyright 2011 Integrated Device Technology, Inc. | |
5 | * Alexandre Bounine <alexandre.bounine@idt.com> | |
6 | * Chul Kim <chul.kim@idt.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the Free | |
10 | * Software Foundation; either version 2 of the License, or (at your option) | |
11 | * any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but WITHOUT | |
14 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
15 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
16 | * more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License along with | |
19 | * this program; if not, write to the Free Software Foundation, Inc., 59 | |
20 | * Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
21 | */ | |
22 | ||
23 | #include <linux/io.h> | |
24 | #include <linux/errno.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/ioport.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/module.h> | |
29 | #include <linux/pci.h> | |
30 | #include <linux/rio.h> | |
31 | #include <linux/rio_drv.h> | |
32 | #include <linux/dma-mapping.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/kfifo.h> | |
35 | #include <linux/delay.h> | |
36 | ||
37 | #include "tsi721.h" | |
38 | ||
39 | #define DEBUG_PW /* Inbound Port-Write debugging */ | |
40 | ||
41 | static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); | |
42 | static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); | |
43 | ||
44 | /** | |
45 | * tsi721_lcread - read from local SREP config space | |
46 | * @mport: RapidIO master port info | |
47 | * @index: ID of RapdiIO interface | |
48 | * @offset: Offset into configuration space | |
49 | * @len: Length (in bytes) of the maintenance transaction | |
50 | * @data: Value to be read into | |
51 | * | |
52 | * Generates a local SREP space read. Returns %0 on | |
53 | * success or %-EINVAL on failure. | |
54 | */ | |
55 | static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset, | |
56 | int len, u32 *data) | |
57 | { | |
58 | struct tsi721_device *priv = mport->priv; | |
59 | ||
60 | if (len != sizeof(u32)) | |
61 | return -EINVAL; /* only 32-bit access is supported */ | |
62 | ||
63 | *data = ioread32(priv->regs + offset); | |
64 | ||
65 | return 0; | |
66 | } | |
67 | ||
68 | /** | |
69 | * tsi721_lcwrite - write into local SREP config space | |
70 | * @mport: RapidIO master port info | |
71 | * @index: ID of RapdiIO interface | |
72 | * @offset: Offset into configuration space | |
73 | * @len: Length (in bytes) of the maintenance transaction | |
74 | * @data: Value to be written | |
75 | * | |
76 | * Generates a local write into SREP configuration space. Returns %0 on | |
77 | * success or %-EINVAL on failure. | |
78 | */ | |
79 | static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset, | |
80 | int len, u32 data) | |
81 | { | |
82 | struct tsi721_device *priv = mport->priv; | |
83 | ||
84 | if (len != sizeof(u32)) | |
85 | return -EINVAL; /* only 32-bit access is supported */ | |
86 | ||
87 | iowrite32(data, priv->regs + offset); | |
88 | ||
89 | return 0; | |
90 | } | |
91 | ||
92 | /** | |
93 | * tsi721_maint_dma - Helper function to generate RapidIO maintenance | |
94 | * transactions using designated Tsi721 DMA channel. | |
95 | * @priv: pointer to tsi721 private data | |
96 | * @sys_size: RapdiIO transport system size | |
97 | * @destid: Destination ID of transaction | |
98 | * @hopcount: Number of hops to target device | |
99 | * @offset: Offset into configuration space | |
100 | * @len: Length (in bytes) of the maintenance transaction | |
101 | * @data: Location to be read from or write into | |
102 | * @do_wr: Operation flag (1 == MAINT_WR) | |
103 | * | |
104 | * Generates a RapidIO maintenance transaction (Read or Write). | |
105 | * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
106 | */ | |
107 | static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size, | |
108 | u16 destid, u8 hopcount, u32 offset, int len, | |
109 | u32 *data, int do_wr) | |
110 | { | |
9eaa3d9b | 111 | void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id); |
48618fb4 AB |
112 | struct tsi721_dma_desc *bd_ptr; |
113 | u32 rd_count, swr_ptr, ch_stat; | |
114 | int i, err = 0; | |
115 | u32 op = do_wr ? MAINT_WR : MAINT_RD; | |
116 | ||
117 | if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32))) | |
118 | return -EINVAL; | |
119 | ||
9eaa3d9b | 120 | bd_ptr = priv->mdma.bd_base; |
48618fb4 | 121 | |
9eaa3d9b | 122 | rd_count = ioread32(regs + TSI721_DMAC_DRDCNT); |
48618fb4 AB |
123 | |
124 | /* Initialize DMA descriptor */ | |
125 | bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid); | |
126 | bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04); | |
127 | bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset); | |
128 | bd_ptr[0].raddr_hi = 0; | |
129 | if (do_wr) | |
130 | bd_ptr[0].data[0] = cpu_to_be32p(data); | |
131 | else | |
132 | bd_ptr[0].data[0] = 0xffffffff; | |
133 | ||
134 | mb(); | |
135 | ||
136 | /* Start DMA operation */ | |
9eaa3d9b AB |
137 | iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT); |
138 | ioread32(regs + TSI721_DMAC_DWRCNT); | |
48618fb4 AB |
139 | i = 0; |
140 | ||
141 | /* Wait until DMA transfer is finished */ | |
9eaa3d9b AB |
142 | while ((ch_stat = ioread32(regs + TSI721_DMAC_STS)) |
143 | & TSI721_DMAC_STS_RUN) { | |
48618fb4 AB |
144 | udelay(1); |
145 | if (++i >= 5000000) { | |
146 | dev_dbg(&priv->pdev->dev, | |
147 | "%s : DMA[%d] read timeout ch_status=%x\n", | |
9eaa3d9b | 148 | __func__, priv->mdma.ch_id, ch_stat); |
48618fb4 AB |
149 | if (!do_wr) |
150 | *data = 0xffffffff; | |
151 | err = -EIO; | |
152 | goto err_out; | |
153 | } | |
154 | } | |
155 | ||
156 | if (ch_stat & TSI721_DMAC_STS_ABORT) { | |
157 | /* If DMA operation aborted due to error, | |
158 | * reinitialize DMA channel | |
159 | */ | |
160 | dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n", | |
161 | __func__, ch_stat); | |
162 | dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n", | |
163 | do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset); | |
9eaa3d9b AB |
164 | iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); |
165 | iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); | |
48618fb4 | 166 | udelay(10); |
9eaa3d9b | 167 | iowrite32(0, regs + TSI721_DMAC_DWRCNT); |
48618fb4 AB |
168 | udelay(1); |
169 | if (!do_wr) | |
170 | *data = 0xffffffff; | |
171 | err = -EIO; | |
172 | goto err_out; | |
173 | } | |
174 | ||
175 | if (!do_wr) | |
176 | *data = be32_to_cpu(bd_ptr[0].data[0]); | |
177 | ||
178 | /* | |
179 | * Update descriptor status FIFO RD pointer. | |
180 | * NOTE: Skipping check and clear FIFO entries because we are waiting | |
181 | * for transfer to be completed. | |
182 | */ | |
9eaa3d9b AB |
183 | swr_ptr = ioread32(regs + TSI721_DMAC_DSWP); |
184 | iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP); | |
48618fb4 AB |
185 | err_out: |
186 | ||
187 | return err; | |
188 | } | |
189 | ||
190 | /** | |
191 | * tsi721_cread_dma - Generate a RapidIO maintenance read transaction | |
192 | * using Tsi721 BDMA engine. | |
193 | * @mport: RapidIO master port control structure | |
194 | * @index: ID of RapdiIO interface | |
195 | * @destid: Destination ID of transaction | |
196 | * @hopcount: Number of hops to target device | |
197 | * @offset: Offset into configuration space | |
198 | * @len: Length (in bytes) of the maintenance transaction | |
199 | * @val: Location to be read into | |
200 | * | |
201 | * Generates a RapidIO maintenance read transaction. | |
202 | * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
203 | */ | |
204 | static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid, | |
205 | u8 hopcount, u32 offset, int len, u32 *data) | |
206 | { | |
207 | struct tsi721_device *priv = mport->priv; | |
208 | ||
209 | return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, | |
210 | offset, len, data, 0); | |
211 | } | |
212 | ||
213 | /** | |
214 | * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction | |
215 | * using Tsi721 BDMA engine | |
216 | * @mport: RapidIO master port control structure | |
217 | * @index: ID of RapdiIO interface | |
218 | * @destid: Destination ID of transaction | |
219 | * @hopcount: Number of hops to target device | |
220 | * @offset: Offset into configuration space | |
221 | * @len: Length (in bytes) of the maintenance transaction | |
222 | * @val: Value to be written | |
223 | * | |
224 | * Generates a RapidIO maintenance write transaction. | |
225 | * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
226 | */ | |
227 | static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid, | |
228 | u8 hopcount, u32 offset, int len, u32 data) | |
229 | { | |
230 | struct tsi721_device *priv = mport->priv; | |
231 | u32 temp = data; | |
232 | ||
233 | return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, | |
234 | offset, len, &temp, 1); | |
235 | } | |
236 | ||
237 | /** | |
238 | * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler | |
239 | * @mport: RapidIO master port structure | |
240 | * | |
241 | * Handles inbound port-write interrupts. Copies PW message from an internal | |
242 | * buffer into PW message FIFO and schedules deferred routine to process | |
243 | * queued messages. | |
244 | */ | |
245 | static int | |
246 | tsi721_pw_handler(struct rio_mport *mport) | |
247 | { | |
248 | struct tsi721_device *priv = mport->priv; | |
249 | u32 pw_stat; | |
250 | u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)]; | |
251 | ||
252 | ||
253 | pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT); | |
254 | ||
255 | if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) { | |
256 | pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0)); | |
257 | pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1)); | |
258 | pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2)); | |
259 | pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3)); | |
260 | ||
261 | /* Queue PW message (if there is room in FIFO), | |
262 | * otherwise discard it. | |
263 | */ | |
264 | spin_lock(&priv->pw_fifo_lock); | |
265 | if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE) | |
266 | kfifo_in(&priv->pw_fifo, pw_buf, | |
267 | TSI721_RIO_PW_MSG_SIZE); | |
268 | else | |
269 | priv->pw_discard_count++; | |
270 | spin_unlock(&priv->pw_fifo_lock); | |
271 | } | |
272 | ||
273 | /* Clear pending PW interrupts */ | |
274 | iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, | |
275 | priv->regs + TSI721_RIO_PW_RX_STAT); | |
276 | ||
277 | schedule_work(&priv->pw_work); | |
278 | ||
279 | return 0; | |
280 | } | |
281 | ||
282 | static void tsi721_pw_dpc(struct work_struct *work) | |
283 | { | |
284 | struct tsi721_device *priv = container_of(work, struct tsi721_device, | |
285 | pw_work); | |
286 | u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message | |
287 | buffer for RIO layer */ | |
288 | ||
289 | /* | |
290 | * Process port-write messages | |
291 | */ | |
292 | while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer, | |
293 | TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) { | |
294 | /* Process one message */ | |
295 | #ifdef DEBUG_PW | |
296 | { | |
297 | u32 i; | |
298 | pr_debug("%s : Port-Write Message:", __func__); | |
299 | for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) { | |
300 | pr_debug("0x%02x: %08x %08x %08x %08x", i*4, | |
301 | msg_buffer[i], msg_buffer[i + 1], | |
302 | msg_buffer[i + 2], msg_buffer[i + 3]); | |
303 | i += 4; | |
304 | } | |
305 | pr_debug("\n"); | |
306 | } | |
307 | #endif | |
308 | /* Pass the port-write message to RIO core for processing */ | |
309 | rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); | |
310 | } | |
311 | } | |
312 | ||
313 | /** | |
314 | * tsi721_pw_enable - enable/disable port-write interface init | |
315 | * @mport: Master port implementing the port write unit | |
316 | * @enable: 1=enable; 0=disable port-write message handling | |
317 | */ | |
318 | static int tsi721_pw_enable(struct rio_mport *mport, int enable) | |
319 | { | |
320 | struct tsi721_device *priv = mport->priv; | |
321 | u32 rval; | |
322 | ||
323 | rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
324 | ||
325 | if (enable) | |
326 | rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX; | |
327 | else | |
328 | rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX; | |
329 | ||
330 | /* Clear pending PW interrupts */ | |
331 | iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, | |
332 | priv->regs + TSI721_RIO_PW_RX_STAT); | |
333 | /* Update enable bits */ | |
334 | iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
335 | ||
336 | return 0; | |
337 | } | |
338 | ||
339 | /** | |
340 | * tsi721_dsend - Send a RapidIO doorbell | |
341 | * @mport: RapidIO master port info | |
342 | * @index: ID of RapidIO interface | |
343 | * @destid: Destination ID of target device | |
344 | * @data: 16-bit info field of RapidIO doorbell | |
345 | * | |
346 | * Sends a RapidIO doorbell message. Always returns %0. | |
347 | */ | |
348 | static int tsi721_dsend(struct rio_mport *mport, int index, | |
349 | u16 destid, u16 data) | |
350 | { | |
351 | struct tsi721_device *priv = mport->priv; | |
352 | u32 offset; | |
353 | ||
354 | offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) | | |
355 | (destid << 2); | |
356 | ||
357 | dev_dbg(&priv->pdev->dev, | |
358 | "Send Doorbell 0x%04x to destID 0x%x\n", data, destid); | |
359 | iowrite16be(data, priv->odb_base + offset); | |
360 | ||
361 | return 0; | |
362 | } | |
363 | ||
364 | /** | |
365 | * tsi721_dbell_handler - Tsi721 doorbell interrupt handler | |
366 | * @mport: RapidIO master port structure | |
367 | * | |
368 | * Handles inbound doorbell interrupts. Copies doorbell entry from an internal | |
369 | * buffer into DB message FIFO and schedules deferred routine to process | |
370 | * queued DBs. | |
371 | */ | |
372 | static int | |
373 | tsi721_dbell_handler(struct rio_mport *mport) | |
374 | { | |
375 | struct tsi721_device *priv = mport->priv; | |
376 | u32 regval; | |
377 | ||
378 | /* Disable IDB interrupts */ | |
379 | regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
380 | regval &= ~TSI721_SR_CHINT_IDBQRCV; | |
381 | iowrite32(regval, | |
382 | priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
383 | ||
384 | schedule_work(&priv->idb_work); | |
385 | ||
386 | return 0; | |
387 | } | |
388 | ||
389 | static void tsi721_db_dpc(struct work_struct *work) | |
390 | { | |
391 | struct tsi721_device *priv = container_of(work, struct tsi721_device, | |
392 | idb_work); | |
393 | struct rio_mport *mport; | |
394 | struct rio_dbell *dbell; | |
395 | int found = 0; | |
396 | u32 wr_ptr, rd_ptr; | |
397 | u64 *idb_entry; | |
398 | u32 regval; | |
399 | union { | |
400 | u64 msg; | |
401 | u8 bytes[8]; | |
402 | } idb; | |
403 | ||
404 | /* | |
405 | * Process queued inbound doorbells | |
406 | */ | |
407 | mport = priv->mport; | |
408 | ||
b24823e6 AB |
409 | wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; |
410 | rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE; | |
48618fb4 AB |
411 | |
412 | while (wr_ptr != rd_ptr) { | |
413 | idb_entry = (u64 *)(priv->idb_base + | |
414 | (TSI721_IDB_ENTRY_SIZE * rd_ptr)); | |
415 | rd_ptr++; | |
b24823e6 | 416 | rd_ptr %= IDB_QSIZE; |
48618fb4 AB |
417 | idb.msg = *idb_entry; |
418 | *idb_entry = 0; | |
419 | ||
420 | /* Process one doorbell */ | |
421 | list_for_each_entry(dbell, &mport->dbells, node) { | |
422 | if ((dbell->res->start <= DBELL_INF(idb.bytes)) && | |
423 | (dbell->res->end >= DBELL_INF(idb.bytes))) { | |
424 | found = 1; | |
425 | break; | |
426 | } | |
427 | } | |
428 | ||
429 | if (found) { | |
430 | dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes), | |
431 | DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); | |
432 | } else { | |
433 | dev_dbg(&priv->pdev->dev, | |
434 | "spurious inb doorbell, sid %2.2x tid %2.2x" | |
435 | " info %4.4x\n", DBELL_SID(idb.bytes), | |
436 | DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); | |
437 | } | |
3670e7e1 AB |
438 | |
439 | wr_ptr = ioread32(priv->regs + | |
440 | TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; | |
48618fb4 AB |
441 | } |
442 | ||
443 | iowrite32(rd_ptr & (IDB_QSIZE - 1), | |
444 | priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); | |
445 | ||
446 | /* Re-enable IDB interrupts */ | |
447 | regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
448 | regval |= TSI721_SR_CHINT_IDBQRCV; | |
449 | iowrite32(regval, | |
450 | priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
3670e7e1 AB |
451 | |
452 | wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; | |
453 | if (wr_ptr != rd_ptr) | |
454 | schedule_work(&priv->idb_work); | |
48618fb4 AB |
455 | } |
456 | ||
457 | /** | |
458 | * tsi721_irqhandler - Tsi721 interrupt handler | |
459 | * @irq: Linux interrupt number | |
460 | * @ptr: Pointer to interrupt-specific data (mport structure) | |
461 | * | |
462 | * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported | |
463 | * interrupt events and calls an event-specific handler(s). | |
464 | */ | |
465 | static irqreturn_t tsi721_irqhandler(int irq, void *ptr) | |
466 | { | |
467 | struct rio_mport *mport = (struct rio_mport *)ptr; | |
468 | struct tsi721_device *priv = mport->priv; | |
469 | u32 dev_int; | |
470 | u32 dev_ch_int; | |
471 | u32 intval; | |
472 | u32 ch_inte; | |
473 | ||
1ccc819d AB |
474 | /* For MSI mode disable all device-level interrupts */ |
475 | if (priv->flags & TSI721_USING_MSI) | |
476 | iowrite32(0, priv->regs + TSI721_DEV_INTE); | |
477 | ||
48618fb4 AB |
478 | dev_int = ioread32(priv->regs + TSI721_DEV_INT); |
479 | if (!dev_int) | |
480 | return IRQ_NONE; | |
481 | ||
482 | dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT); | |
483 | ||
484 | if (dev_int & TSI721_DEV_INT_SR2PC_CH) { | |
485 | /* Service SR2PC Channel interrupts */ | |
486 | if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) { | |
487 | /* Service Inbound Doorbell interrupt */ | |
488 | intval = ioread32(priv->regs + | |
489 | TSI721_SR_CHINT(IDB_QUEUE)); | |
490 | if (intval & TSI721_SR_CHINT_IDBQRCV) | |
491 | tsi721_dbell_handler(mport); | |
492 | else | |
493 | dev_info(&priv->pdev->dev, | |
494 | "Unsupported SR_CH_INT %x\n", intval); | |
495 | ||
496 | /* Clear interrupts */ | |
497 | iowrite32(intval, | |
498 | priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
499 | ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
500 | } | |
501 | } | |
502 | ||
503 | if (dev_int & TSI721_DEV_INT_SMSG_CH) { | |
504 | int ch; | |
505 | ||
506 | /* | |
507 | * Service channel interrupts from Messaging Engine | |
508 | */ | |
509 | ||
510 | if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */ | |
511 | /* Disable signaled OB MSG Channel interrupts */ | |
512 | ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
513 | ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M); | |
514 | iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
515 | ||
516 | /* | |
517 | * Process Inbound Message interrupt for each MBOX | |
518 | */ | |
519 | for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) { | |
520 | if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch))) | |
521 | continue; | |
522 | tsi721_imsg_handler(priv, ch); | |
523 | } | |
524 | } | |
525 | ||
526 | if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */ | |
527 | /* Disable signaled OB MSG Channel interrupts */ | |
528 | ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
529 | ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M); | |
530 | iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
531 | ||
532 | /* | |
533 | * Process Outbound Message interrupts for each MBOX | |
534 | */ | |
535 | ||
536 | for (ch = 0; ch < RIO_MAX_MBOX; ch++) { | |
537 | if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch))) | |
538 | continue; | |
539 | tsi721_omsg_handler(priv, ch); | |
540 | } | |
541 | } | |
542 | } | |
543 | ||
544 | if (dev_int & TSI721_DEV_INT_SRIO) { | |
545 | /* Service SRIO MAC interrupts */ | |
546 | intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); | |
547 | if (intval & TSI721_RIO_EM_INT_STAT_PW_RX) | |
548 | tsi721_pw_handler(mport); | |
549 | } | |
550 | ||
9eaa3d9b AB |
551 | #ifdef CONFIG_RAPIDIO_DMA_ENGINE |
552 | if (dev_int & TSI721_DEV_INT_BDMA_CH) { | |
553 | int ch; | |
554 | ||
555 | if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) { | |
556 | dev_dbg(&priv->pdev->dev, | |
557 | "IRQ from DMA channel 0x%08x\n", dev_ch_int); | |
558 | ||
559 | for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) { | |
560 | if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch))) | |
561 | continue; | |
562 | tsi721_bdma_handler(&priv->bdma[ch]); | |
563 | } | |
564 | } | |
565 | } | |
566 | #endif | |
1ccc819d AB |
567 | |
568 | /* For MSI mode re-enable device-level interrupts */ | |
569 | if (priv->flags & TSI721_USING_MSI) { | |
570 | dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | | |
571 | TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; | |
572 | iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); | |
573 | } | |
574 | ||
48618fb4 AB |
575 | return IRQ_HANDLED; |
576 | } | |
577 | ||
578 | static void tsi721_interrupts_init(struct tsi721_device *priv) | |
579 | { | |
580 | u32 intr; | |
581 | ||
582 | /* Enable IDB interrupts */ | |
583 | iowrite32(TSI721_SR_CHINT_ALL, | |
584 | priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
585 | iowrite32(TSI721_SR_CHINT_IDBQRCV, | |
586 | priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
48618fb4 AB |
587 | |
588 | /* Enable SRIO MAC interrupts */ | |
589 | iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT, | |
590 | priv->regs + TSI721_RIO_EM_DEV_INT_EN); | |
591 | ||
9eaa3d9b AB |
592 | /* Enable interrupts from channels in use */ |
593 | #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
594 | intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) | | |
595 | (TSI721_INT_BDMA_CHAN_M & | |
596 | ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT)); | |
597 | #else | |
598 | intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE); | |
599 | #endif | |
600 | iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE); | |
601 | ||
48618fb4 AB |
602 | if (priv->flags & TSI721_USING_MSIX) |
603 | intr = TSI721_DEV_INT_SRIO; | |
604 | else | |
605 | intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | | |
9eaa3d9b | 606 | TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; |
48618fb4 AB |
607 | |
608 | iowrite32(intr, priv->regs + TSI721_DEV_INTE); | |
609 | ioread32(priv->regs + TSI721_DEV_INTE); | |
610 | } | |
611 | ||
612 | #ifdef CONFIG_PCI_MSI | |
613 | /** | |
614 | * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging | |
615 | * @irq: Linux interrupt number | |
616 | * @ptr: Pointer to interrupt-specific data (mport structure) | |
617 | * | |
618 | * Handles outbound messaging interrupts signaled using MSI-X. | |
619 | */ | |
620 | static irqreturn_t tsi721_omsg_msix(int irq, void *ptr) | |
621 | { | |
622 | struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; | |
623 | int mbox; | |
624 | ||
625 | mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX; | |
626 | tsi721_omsg_handler(priv, mbox); | |
627 | return IRQ_HANDLED; | |
628 | } | |
629 | ||
630 | /** | |
631 | * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging | |
632 | * @irq: Linux interrupt number | |
633 | * @ptr: Pointer to interrupt-specific data (mport structure) | |
634 | * | |
635 | * Handles inbound messaging interrupts signaled using MSI-X. | |
636 | */ | |
637 | static irqreturn_t tsi721_imsg_msix(int irq, void *ptr) | |
638 | { | |
639 | struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; | |
640 | int mbox; | |
641 | ||
642 | mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX; | |
643 | tsi721_imsg_handler(priv, mbox + 4); | |
644 | return IRQ_HANDLED; | |
645 | } | |
646 | ||
647 | /** | |
648 | * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler | |
649 | * @irq: Linux interrupt number | |
650 | * @ptr: Pointer to interrupt-specific data (mport structure) | |
651 | * | |
652 | * Handles Tsi721 interrupts from SRIO MAC. | |
653 | */ | |
654 | static irqreturn_t tsi721_srio_msix(int irq, void *ptr) | |
655 | { | |
656 | struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; | |
657 | u32 srio_int; | |
658 | ||
659 | /* Service SRIO MAC interrupts */ | |
660 | srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); | |
661 | if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX) | |
662 | tsi721_pw_handler((struct rio_mport *)ptr); | |
663 | ||
664 | return IRQ_HANDLED; | |
665 | } | |
666 | ||
667 | /** | |
668 | * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler | |
669 | * @irq: Linux interrupt number | |
670 | * @ptr: Pointer to interrupt-specific data (mport structure) | |
671 | * | |
672 | * Handles Tsi721 interrupts from SR2PC Channel. | |
673 | * NOTE: At this moment services only one SR2PC channel associated with inbound | |
674 | * doorbells. | |
675 | */ | |
676 | static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr) | |
677 | { | |
678 | struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; | |
679 | u32 sr_ch_int; | |
680 | ||
681 | /* Service Inbound DB interrupt from SR2PC channel */ | |
682 | sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
683 | if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV) | |
684 | tsi721_dbell_handler((struct rio_mport *)ptr); | |
685 | ||
686 | /* Clear interrupts */ | |
687 | iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
688 | /* Read back to ensure that interrupt was cleared */ | |
689 | sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
690 | ||
691 | return IRQ_HANDLED; | |
692 | } | |
693 | ||
694 | /** | |
695 | * tsi721_request_msix - register interrupt service for MSI-X mode. | |
696 | * @mport: RapidIO master port structure | |
697 | * | |
698 | * Registers MSI-X interrupt service routines for interrupts that are active | |
699 | * immediately after mport initialization. Messaging interrupt service routines | |
700 | * should be registered during corresponding open requests. | |
701 | */ | |
702 | static int tsi721_request_msix(struct rio_mport *mport) | |
703 | { | |
704 | struct tsi721_device *priv = mport->priv; | |
705 | int err = 0; | |
706 | ||
707 | err = request_irq(priv->msix[TSI721_VECT_IDB].vector, | |
708 | tsi721_sr2pc_ch_msix, 0, | |
709 | priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport); | |
710 | if (err) | |
711 | goto out; | |
712 | ||
713 | err = request_irq(priv->msix[TSI721_VECT_PWRX].vector, | |
714 | tsi721_srio_msix, 0, | |
715 | priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport); | |
716 | if (err) | |
717 | free_irq( | |
718 | priv->msix[TSI721_VECT_IDB].vector, | |
719 | (void *)mport); | |
720 | out: | |
721 | return err; | |
722 | } | |
723 | ||
724 | /** | |
725 | * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721. | |
726 | * @priv: pointer to tsi721 private data | |
727 | * | |
728 | * Configures MSI-X support for Tsi721. Supports only an exact number | |
729 | * of requested vectors. | |
730 | */ | |
731 | static int tsi721_enable_msix(struct tsi721_device *priv) | |
732 | { | |
733 | struct msix_entry entries[TSI721_VECT_MAX]; | |
734 | int err; | |
735 | int i; | |
736 | ||
737 | entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE); | |
738 | entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT; | |
739 | ||
740 | /* | |
741 | * Initialize MSI-X entries for Messaging Engine: | |
742 | * this driver supports four RIO mailboxes (inbound and outbound) | |
743 | * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore | |
744 | * offset +4 is added to IB MBOX number. | |
745 | */ | |
746 | for (i = 0; i < RIO_MAX_MBOX; i++) { | |
747 | entries[TSI721_VECT_IMB0_RCV + i].entry = | |
748 | TSI721_MSIX_IMSG_DQ_RCV(i + 4); | |
749 | entries[TSI721_VECT_IMB0_INT + i].entry = | |
750 | TSI721_MSIX_IMSG_INT(i + 4); | |
751 | entries[TSI721_VECT_OMB0_DONE + i].entry = | |
752 | TSI721_MSIX_OMSG_DONE(i); | |
753 | entries[TSI721_VECT_OMB0_INT + i].entry = | |
754 | TSI721_MSIX_OMSG_INT(i); | |
755 | } | |
756 | ||
9eaa3d9b AB |
757 | #ifdef CONFIG_RAPIDIO_DMA_ENGINE |
758 | /* | |
759 | * Initialize MSI-X entries for Block DMA Engine: | |
760 | * this driver supports XXX DMA channels | |
761 | * (one is reserved for SRIO maintenance transactions) | |
762 | */ | |
763 | for (i = 0; i < TSI721_DMA_CHNUM; i++) { | |
764 | entries[TSI721_VECT_DMA0_DONE + i].entry = | |
765 | TSI721_MSIX_DMACH_DONE(i); | |
766 | entries[TSI721_VECT_DMA0_INT + i].entry = | |
767 | TSI721_MSIX_DMACH_INT(i); | |
768 | } | |
769 | #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ | |
770 | ||
48618fb4 AB |
771 | err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries)); |
772 | if (err) { | |
773 | if (err > 0) | |
774 | dev_info(&priv->pdev->dev, | |
775 | "Only %d MSI-X vectors available, " | |
776 | "not using MSI-X\n", err); | |
9eaa3d9b AB |
777 | else |
778 | dev_err(&priv->pdev->dev, | |
779 | "Failed to enable MSI-X (err=%d)\n", err); | |
48618fb4 AB |
780 | return err; |
781 | } | |
782 | ||
783 | /* | |
784 | * Copy MSI-X vector information into tsi721 private structure | |
785 | */ | |
786 | priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector; | |
787 | snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX, | |
788 | DRV_NAME "-idb@pci:%s", pci_name(priv->pdev)); | |
789 | priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector; | |
790 | snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX, | |
791 | DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev)); | |
792 | ||
793 | for (i = 0; i < RIO_MAX_MBOX; i++) { | |
794 | priv->msix[TSI721_VECT_IMB0_RCV + i].vector = | |
795 | entries[TSI721_VECT_IMB0_RCV + i].vector; | |
796 | snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name, | |
797 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s", | |
798 | i, pci_name(priv->pdev)); | |
799 | ||
800 | priv->msix[TSI721_VECT_IMB0_INT + i].vector = | |
801 | entries[TSI721_VECT_IMB0_INT + i].vector; | |
802 | snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name, | |
803 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s", | |
804 | i, pci_name(priv->pdev)); | |
805 | ||
806 | priv->msix[TSI721_VECT_OMB0_DONE + i].vector = | |
807 | entries[TSI721_VECT_OMB0_DONE + i].vector; | |
808 | snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name, | |
809 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s", | |
810 | i, pci_name(priv->pdev)); | |
811 | ||
812 | priv->msix[TSI721_VECT_OMB0_INT + i].vector = | |
813 | entries[TSI721_VECT_OMB0_INT + i].vector; | |
814 | snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name, | |
815 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s", | |
816 | i, pci_name(priv->pdev)); | |
817 | } | |
818 | ||
9eaa3d9b AB |
819 | #ifdef CONFIG_RAPIDIO_DMA_ENGINE |
820 | for (i = 0; i < TSI721_DMA_CHNUM; i++) { | |
821 | priv->msix[TSI721_VECT_DMA0_DONE + i].vector = | |
822 | entries[TSI721_VECT_DMA0_DONE + i].vector; | |
823 | snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name, | |
824 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s", | |
825 | i, pci_name(priv->pdev)); | |
826 | ||
827 | priv->msix[TSI721_VECT_DMA0_INT + i].vector = | |
828 | entries[TSI721_VECT_DMA0_INT + i].vector; | |
829 | snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name, | |
830 | IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s", | |
831 | i, pci_name(priv->pdev)); | |
832 | } | |
833 | #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ | |
834 | ||
48618fb4 AB |
835 | return 0; |
836 | } | |
837 | #endif /* CONFIG_PCI_MSI */ | |
838 | ||
839 | static int tsi721_request_irq(struct rio_mport *mport) | |
840 | { | |
841 | struct tsi721_device *priv = mport->priv; | |
842 | int err; | |
843 | ||
844 | #ifdef CONFIG_PCI_MSI | |
845 | if (priv->flags & TSI721_USING_MSIX) | |
846 | err = tsi721_request_msix(mport); | |
847 | else | |
848 | #endif | |
849 | err = request_irq(priv->pdev->irq, tsi721_irqhandler, | |
850 | (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED, | |
851 | DRV_NAME, (void *)mport); | |
852 | ||
853 | if (err) | |
854 | dev_err(&priv->pdev->dev, | |
855 | "Unable to allocate interrupt, Error: %d\n", err); | |
856 | ||
857 | return err; | |
858 | } | |
859 | ||
860 | /** | |
861 | * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO) | |
862 | * translation regions. | |
863 | * @priv: pointer to tsi721 private data | |
864 | * | |
865 | * Disables SREP translation regions. | |
866 | */ | |
867 | static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) | |
868 | { | |
869 | int i; | |
870 | ||
871 | /* Disable all PC2SR translation windows */ | |
872 | for (i = 0; i < TSI721_OBWIN_NUM; i++) | |
873 | iowrite32(0, priv->regs + TSI721_OBWINLB(i)); | |
874 | } | |
875 | ||
71afe341 AB |
876 | /** |
877 | * tsi721_rio_map_inb_mem -- Mapping inbound memory region. | |
878 | * @mport: RapidIO master port | |
879 | * @lstart: Local memory space start address. | |
880 | * @rstart: RapidIO space start address. | |
881 | * @size: The mapping region size. | |
882 | * @flags: Flags for mapping. 0 for using default flags. | |
883 | * | |
884 | * Return: 0 -- Success. | |
885 | * | |
886 | * This function will create the inbound mapping | |
887 | * from rstart to lstart. | |
888 | */ | |
889 | static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, | |
890 | u64 rstart, u32 size, u32 flags) | |
891 | { | |
892 | struct tsi721_device *priv = mport->priv; | |
893 | int i; | |
894 | u32 regval; | |
895 | ||
896 | if (!is_power_of_2(size) || size < 0x1000 || | |
897 | ((u64)lstart & (size - 1)) || (rstart & (size - 1))) | |
898 | return -EINVAL; | |
899 | ||
900 | /* Search for free inbound translation window */ | |
901 | for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
902 | regval = ioread32(priv->regs + TSI721_IBWIN_LB(i)); | |
903 | if (!(regval & TSI721_IBWIN_LB_WEN)) | |
904 | break; | |
905 | } | |
906 | ||
907 | if (i >= TSI721_IBWIN_NUM) { | |
908 | dev_err(&priv->pdev->dev, | |
909 | "Unable to find free inbound window\n"); | |
910 | return -EBUSY; | |
911 | } | |
912 | ||
913 | iowrite32(TSI721_IBWIN_SIZE(size) << 8, | |
914 | priv->regs + TSI721_IBWIN_SZ(i)); | |
915 | ||
916 | iowrite32(((u64)lstart >> 32), priv->regs + TSI721_IBWIN_TUA(i)); | |
917 | iowrite32(((u64)lstart & TSI721_IBWIN_TLA_ADD), | |
918 | priv->regs + TSI721_IBWIN_TLA(i)); | |
919 | ||
920 | iowrite32(rstart >> 32, priv->regs + TSI721_IBWIN_UB(i)); | |
921 | iowrite32((rstart & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN, | |
922 | priv->regs + TSI721_IBWIN_LB(i)); | |
923 | dev_dbg(&priv->pdev->dev, | |
924 | "Configured IBWIN%d mapping (RIO_0x%llx -> PCIe_0x%llx)\n", | |
925 | i, rstart, (unsigned long long)lstart); | |
926 | ||
927 | return 0; | |
928 | } | |
929 | ||
930 | /** | |
931 | * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region. | |
932 | * @mport: RapidIO master port | |
933 | * @lstart: Local memory space start address. | |
934 | */ | |
935 | static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport, | |
936 | dma_addr_t lstart) | |
937 | { | |
938 | struct tsi721_device *priv = mport->priv; | |
939 | int i; | |
940 | u64 addr; | |
941 | u32 regval; | |
942 | ||
943 | /* Search for matching active inbound translation window */ | |
944 | for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
945 | regval = ioread32(priv->regs + TSI721_IBWIN_LB(i)); | |
946 | if (regval & TSI721_IBWIN_LB_WEN) { | |
947 | regval = ioread32(priv->regs + TSI721_IBWIN_TUA(i)); | |
948 | addr = (u64)regval << 32; | |
949 | regval = ioread32(priv->regs + TSI721_IBWIN_TLA(i)); | |
950 | addr |= regval & TSI721_IBWIN_TLA_ADD; | |
951 | ||
952 | if (addr == (u64)lstart) { | |
953 | iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); | |
954 | break; | |
955 | } | |
956 | } | |
957 | } | |
958 | } | |
959 | ||
48618fb4 AB |
960 | /** |
961 | * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe) | |
962 | * translation regions. | |
963 | * @priv: pointer to tsi721 private data | |
964 | * | |
965 | * Disables inbound windows. | |
966 | */ | |
967 | static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv) | |
968 | { | |
969 | int i; | |
970 | ||
971 | /* Disable all SR2PC inbound windows */ | |
972 | for (i = 0; i < TSI721_IBWIN_NUM; i++) | |
71afe341 | 973 | iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); |
48618fb4 AB |
974 | } |
975 | ||
976 | /** | |
977 | * tsi721_port_write_init - Inbound port write interface init | |
978 | * @priv: pointer to tsi721 private data | |
979 | * | |
980 | * Initializes inbound port write handler. | |
981 | * Returns %0 on success or %-ENOMEM on failure. | |
982 | */ | |
983 | static int tsi721_port_write_init(struct tsi721_device *priv) | |
984 | { | |
985 | priv->pw_discard_count = 0; | |
986 | INIT_WORK(&priv->pw_work, tsi721_pw_dpc); | |
987 | spin_lock_init(&priv->pw_fifo_lock); | |
988 | if (kfifo_alloc(&priv->pw_fifo, | |
989 | TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { | |
990 | dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n"); | |
991 | return -ENOMEM; | |
992 | } | |
993 | ||
994 | /* Use reliable port-write capture mode */ | |
995 | iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL); | |
996 | return 0; | |
997 | } | |
998 | ||
999 | static int tsi721_doorbell_init(struct tsi721_device *priv) | |
1000 | { | |
1001 | /* Outbound Doorbells do not require any setup. | |
1002 | * Tsi721 uses dedicated PCI BAR1 to generate doorbells. | |
1003 | * That BAR1 was mapped during the probe routine. | |
1004 | */ | |
1005 | ||
1006 | /* Initialize Inbound Doorbell processing DPC and queue */ | |
1007 | priv->db_discard_count = 0; | |
1008 | INIT_WORK(&priv->idb_work, tsi721_db_dpc); | |
1009 | ||
1010 | /* Allocate buffer for inbound doorbells queue */ | |
ceb96398 | 1011 | priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, |
48618fb4 AB |
1012 | IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, |
1013 | &priv->idb_dma, GFP_KERNEL); | |
1014 | if (!priv->idb_base) | |
1015 | return -ENOMEM; | |
1016 | ||
48618fb4 AB |
1017 | dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", |
1018 | priv->idb_base, (unsigned long long)priv->idb_dma); | |
1019 | ||
1020 | iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE), | |
1021 | priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE)); | |
1022 | iowrite32(((u64)priv->idb_dma >> 32), | |
1023 | priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE)); | |
1024 | iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR), | |
1025 | priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE)); | |
1026 | /* Enable accepting all inbound doorbells */ | |
1027 | iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE)); | |
1028 | ||
1029 | iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE)); | |
1030 | ||
1031 | iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); | |
1032 | ||
1033 | return 0; | |
1034 | } | |
1035 | ||
1036 | static void tsi721_doorbell_free(struct tsi721_device *priv) | |
1037 | { | |
1038 | if (priv->idb_base == NULL) | |
1039 | return; | |
1040 | ||
1041 | /* Free buffer allocated for inbound doorbell queue */ | |
1042 | dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, | |
1043 | priv->idb_base, priv->idb_dma); | |
1044 | priv->idb_base = NULL; | |
1045 | } | |
1046 | ||
9eaa3d9b AB |
1047 | /** |
1048 | * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel. | |
1049 | * @priv: pointer to tsi721 private data | |
1050 | * | |
1051 | * Initialize BDMA channel allocated for RapidIO maintenance read/write | |
1052 | * request generation | |
1053 | * Returns %0 on success or %-ENOMEM on failure. | |
1054 | */ | |
1055 | static int tsi721_bdma_maint_init(struct tsi721_device *priv) | |
48618fb4 AB |
1056 | { |
1057 | struct tsi721_dma_desc *bd_ptr; | |
1058 | u64 *sts_ptr; | |
1059 | dma_addr_t bd_phys, sts_phys; | |
1060 | int sts_size; | |
9eaa3d9b AB |
1061 | int bd_num = 2; |
1062 | void __iomem *regs; | |
48618fb4 | 1063 | |
9eaa3d9b AB |
1064 | dev_dbg(&priv->pdev->dev, |
1065 | "Init Block DMA Engine for Maintenance requests, CH%d\n", | |
1066 | TSI721_DMACH_MAINT); | |
48618fb4 AB |
1067 | |
1068 | /* | |
1069 | * Initialize DMA channel for maintenance requests | |
1070 | */ | |
1071 | ||
9eaa3d9b AB |
1072 | priv->mdma.ch_id = TSI721_DMACH_MAINT; |
1073 | regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT); | |
1074 | ||
48618fb4 | 1075 | /* Allocate space for DMA descriptors */ |
ceb96398 | 1076 | bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, |
48618fb4 AB |
1077 | bd_num * sizeof(struct tsi721_dma_desc), |
1078 | &bd_phys, GFP_KERNEL); | |
1079 | if (!bd_ptr) | |
1080 | return -ENOMEM; | |
1081 | ||
9eaa3d9b AB |
1082 | priv->mdma.bd_num = bd_num; |
1083 | priv->mdma.bd_phys = bd_phys; | |
1084 | priv->mdma.bd_base = bd_ptr; | |
48618fb4 | 1085 | |
48618fb4 AB |
1086 | dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", |
1087 | bd_ptr, (unsigned long long)bd_phys); | |
1088 | ||
1089 | /* Allocate space for descriptor status FIFO */ | |
1090 | sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? | |
1091 | bd_num : TSI721_DMA_MINSTSSZ; | |
1092 | sts_size = roundup_pow_of_two(sts_size); | |
ceb96398 | 1093 | sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, |
48618fb4 AB |
1094 | sts_size * sizeof(struct tsi721_dma_sts), |
1095 | &sts_phys, GFP_KERNEL); | |
1096 | if (!sts_ptr) { | |
1097 | /* Free space allocated for DMA descriptors */ | |
1098 | dma_free_coherent(&priv->pdev->dev, | |
1099 | bd_num * sizeof(struct tsi721_dma_desc), | |
1100 | bd_ptr, bd_phys); | |
9eaa3d9b | 1101 | priv->mdma.bd_base = NULL; |
48618fb4 AB |
1102 | return -ENOMEM; |
1103 | } | |
1104 | ||
9eaa3d9b AB |
1105 | priv->mdma.sts_phys = sts_phys; |
1106 | priv->mdma.sts_base = sts_ptr; | |
1107 | priv->mdma.sts_size = sts_size; | |
48618fb4 | 1108 | |
48618fb4 AB |
1109 | dev_dbg(&priv->pdev->dev, |
1110 | "desc status FIFO @ %p (phys = %llx) size=0x%x\n", | |
1111 | sts_ptr, (unsigned long long)sts_phys, sts_size); | |
1112 | ||
1113 | /* Initialize DMA descriptors ring */ | |
1114 | bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29); | |
1115 | bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys & | |
1116 | TSI721_DMAC_DPTRL_MASK); | |
1117 | bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32); | |
1118 | ||
1119 | /* Setup DMA descriptor pointers */ | |
9eaa3d9b | 1120 | iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH); |
48618fb4 | 1121 | iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK), |
9eaa3d9b | 1122 | regs + TSI721_DMAC_DPTRL); |
48618fb4 AB |
1123 | |
1124 | /* Setup descriptor status FIFO */ | |
9eaa3d9b | 1125 | iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH); |
48618fb4 | 1126 | iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK), |
9eaa3d9b | 1127 | regs + TSI721_DMAC_DSBL); |
48618fb4 | 1128 | iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size), |
9eaa3d9b | 1129 | regs + TSI721_DMAC_DSSZ); |
48618fb4 AB |
1130 | |
1131 | /* Clear interrupt bits */ | |
9eaa3d9b | 1132 | iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); |
48618fb4 | 1133 | |
9eaa3d9b | 1134 | ioread32(regs + TSI721_DMAC_INT); |
48618fb4 AB |
1135 | |
1136 | /* Toggle DMA channel initialization */ | |
9eaa3d9b AB |
1137 | iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); |
1138 | ioread32(regs + TSI721_DMAC_CTL); | |
48618fb4 AB |
1139 | udelay(10); |
1140 | ||
1141 | return 0; | |
1142 | } | |
1143 | ||
9eaa3d9b | 1144 | static int tsi721_bdma_maint_free(struct tsi721_device *priv) |
48618fb4 AB |
1145 | { |
1146 | u32 ch_stat; | |
9eaa3d9b AB |
1147 | struct tsi721_bdma_maint *mdma = &priv->mdma; |
1148 | void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id); | |
48618fb4 | 1149 | |
9eaa3d9b | 1150 | if (mdma->bd_base == NULL) |
48618fb4 AB |
1151 | return 0; |
1152 | ||
1153 | /* Check if DMA channel still running */ | |
9eaa3d9b | 1154 | ch_stat = ioread32(regs + TSI721_DMAC_STS); |
48618fb4 AB |
1155 | if (ch_stat & TSI721_DMAC_STS_RUN) |
1156 | return -EFAULT; | |
1157 | ||
1158 | /* Put DMA channel into init state */ | |
9eaa3d9b | 1159 | iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); |
48618fb4 AB |
1160 | |
1161 | /* Free space allocated for DMA descriptors */ | |
1162 | dma_free_coherent(&priv->pdev->dev, | |
9eaa3d9b AB |
1163 | mdma->bd_num * sizeof(struct tsi721_dma_desc), |
1164 | mdma->bd_base, mdma->bd_phys); | |
1165 | mdma->bd_base = NULL; | |
48618fb4 AB |
1166 | |
1167 | /* Free space allocated for status FIFO */ | |
1168 | dma_free_coherent(&priv->pdev->dev, | |
9eaa3d9b AB |
1169 | mdma->sts_size * sizeof(struct tsi721_dma_sts), |
1170 | mdma->sts_base, mdma->sts_phys); | |
1171 | mdma->sts_base = NULL; | |
48618fb4 AB |
1172 | return 0; |
1173 | } | |
1174 | ||
48618fb4 AB |
1175 | /* Enable Inbound Messaging Interrupts */ |
1176 | static void | |
1177 | tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch, | |
1178 | u32 inte_mask) | |
1179 | { | |
1180 | u32 rval; | |
1181 | ||
1182 | if (!inte_mask) | |
1183 | return; | |
1184 | ||
1185 | /* Clear pending Inbound Messaging interrupts */ | |
1186 | iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); | |
1187 | ||
1188 | /* Enable Inbound Messaging interrupts */ | |
1189 | rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); | |
1190 | iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
1191 | ||
1192 | if (priv->flags & TSI721_USING_MSIX) | |
1193 | return; /* Finished if we are in MSI-X mode */ | |
1194 | ||
1195 | /* | |
1196 | * For MSI and INTA interrupt signalling we need to enable next levels | |
1197 | */ | |
1198 | ||
1199 | /* Enable Device Channel Interrupt */ | |
1200 | rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1201 | iowrite32(rval | TSI721_INT_IMSG_CHAN(ch), | |
1202 | priv->regs + TSI721_DEV_CHAN_INTE); | |
1203 | } | |
1204 | ||
1205 | /* Disable Inbound Messaging Interrupts */ | |
1206 | static void | |
1207 | tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch, | |
1208 | u32 inte_mask) | |
1209 | { | |
1210 | u32 rval; | |
1211 | ||
1212 | if (!inte_mask) | |
1213 | return; | |
1214 | ||
1215 | /* Clear pending Inbound Messaging interrupts */ | |
1216 | iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); | |
1217 | ||
1218 | /* Disable Inbound Messaging interrupts */ | |
1219 | rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); | |
1220 | rval &= ~inte_mask; | |
1221 | iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
1222 | ||
1223 | if (priv->flags & TSI721_USING_MSIX) | |
1224 | return; /* Finished if we are in MSI-X mode */ | |
1225 | ||
1226 | /* | |
1227 | * For MSI and INTA interrupt signalling we need to disable next levels | |
1228 | */ | |
1229 | ||
1230 | /* Disable Device Channel Interrupt */ | |
1231 | rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1232 | rval &= ~TSI721_INT_IMSG_CHAN(ch); | |
1233 | iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); | |
1234 | } | |
1235 | ||
1236 | /* Enable Outbound Messaging interrupts */ | |
1237 | static void | |
1238 | tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch, | |
1239 | u32 inte_mask) | |
1240 | { | |
1241 | u32 rval; | |
1242 | ||
1243 | if (!inte_mask) | |
1244 | return; | |
1245 | ||
1246 | /* Clear pending Outbound Messaging interrupts */ | |
1247 | iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); | |
1248 | ||
1249 | /* Enable Outbound Messaging channel interrupts */ | |
1250 | rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); | |
1251 | iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
1252 | ||
1253 | if (priv->flags & TSI721_USING_MSIX) | |
1254 | return; /* Finished if we are in MSI-X mode */ | |
1255 | ||
1256 | /* | |
1257 | * For MSI and INTA interrupt signalling we need to enable next levels | |
1258 | */ | |
1259 | ||
1260 | /* Enable Device Channel Interrupt */ | |
1261 | rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1262 | iowrite32(rval | TSI721_INT_OMSG_CHAN(ch), | |
1263 | priv->regs + TSI721_DEV_CHAN_INTE); | |
1264 | } | |
1265 | ||
1266 | /* Disable Outbound Messaging interrupts */ | |
1267 | static void | |
1268 | tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch, | |
1269 | u32 inte_mask) | |
1270 | { | |
1271 | u32 rval; | |
1272 | ||
1273 | if (!inte_mask) | |
1274 | return; | |
1275 | ||
1276 | /* Clear pending Outbound Messaging interrupts */ | |
1277 | iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); | |
1278 | ||
1279 | /* Disable Outbound Messaging interrupts */ | |
1280 | rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); | |
1281 | rval &= ~inte_mask; | |
1282 | iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
1283 | ||
1284 | if (priv->flags & TSI721_USING_MSIX) | |
1285 | return; /* Finished if we are in MSI-X mode */ | |
1286 | ||
1287 | /* | |
1288 | * For MSI and INTA interrupt signalling we need to disable next levels | |
1289 | */ | |
1290 | ||
1291 | /* Disable Device Channel Interrupt */ | |
1292 | rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1293 | rval &= ~TSI721_INT_OMSG_CHAN(ch); | |
1294 | iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); | |
1295 | } | |
1296 | ||
1297 | /** | |
1298 | * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue | |
1299 | * @mport: Master port with outbound message queue | |
1300 | * @rdev: Target of outbound message | |
1301 | * @mbox: Outbound mailbox | |
1302 | * @buffer: Message to add to outbound queue | |
1303 | * @len: Length of message | |
1304 | */ | |
1305 | static int | |
1306 | tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, | |
1307 | void *buffer, size_t len) | |
1308 | { | |
1309 | struct tsi721_device *priv = mport->priv; | |
1310 | struct tsi721_omsg_desc *desc; | |
1311 | u32 tx_slot; | |
1312 | ||
1313 | if (!priv->omsg_init[mbox] || | |
1314 | len > TSI721_MSG_MAX_SIZE || len < 8) | |
1315 | return -EINVAL; | |
1316 | ||
1317 | tx_slot = priv->omsg_ring[mbox].tx_slot; | |
1318 | ||
1319 | /* Copy copy message into transfer buffer */ | |
1320 | memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len); | |
1321 | ||
1322 | if (len & 0x7) | |
1323 | len += 8; | |
1324 | ||
1325 | /* Build descriptor associated with buffer */ | |
1326 | desc = priv->omsg_ring[mbox].omd_base; | |
1327 | desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid); | |
1328 | if (tx_slot % 4 == 0) | |
1329 | desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF); | |
1330 | ||
1331 | desc[tx_slot].msg_info = | |
1332 | cpu_to_le32((mport->sys_size << 26) | (mbox << 22) | | |
1333 | (0xe << 12) | (len & 0xff8)); | |
1334 | desc[tx_slot].bufptr_lo = | |
1335 | cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] & | |
1336 | 0xffffffff); | |
1337 | desc[tx_slot].bufptr_hi = | |
1338 | cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32); | |
1339 | ||
1340 | priv->omsg_ring[mbox].wr_count++; | |
1341 | ||
1342 | /* Go to next descriptor */ | |
1343 | if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) { | |
1344 | priv->omsg_ring[mbox].tx_slot = 0; | |
1345 | /* Move through the ring link descriptor at the end */ | |
1346 | priv->omsg_ring[mbox].wr_count++; | |
1347 | } | |
1348 | ||
1349 | mb(); | |
1350 | ||
1351 | /* Set new write count value */ | |
1352 | iowrite32(priv->omsg_ring[mbox].wr_count, | |
1353 | priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
1354 | ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
1355 | ||
1356 | return 0; | |
1357 | } | |
1358 | ||
1359 | /** | |
1360 | * tsi721_omsg_handler - Outbound Message Interrupt Handler | |
1361 | * @priv: pointer to tsi721 private data | |
1362 | * @ch: number of OB MSG channel to service | |
1363 | * | |
1364 | * Services channel interrupts from outbound messaging engine. | |
1365 | */ | |
1366 | static void tsi721_omsg_handler(struct tsi721_device *priv, int ch) | |
1367 | { | |
1368 | u32 omsg_int; | |
1369 | ||
1370 | spin_lock(&priv->omsg_ring[ch].lock); | |
1371 | ||
1372 | omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch)); | |
1373 | ||
1374 | if (omsg_int & TSI721_OBDMAC_INT_ST_FULL) | |
1375 | dev_info(&priv->pdev->dev, | |
1376 | "OB MBOX%d: Status FIFO is full\n", ch); | |
1377 | ||
1378 | if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) { | |
1379 | u32 srd_ptr; | |
1380 | u64 *sts_ptr, last_ptr = 0, prev_ptr = 0; | |
1381 | int i, j; | |
1382 | u32 tx_slot; | |
1383 | ||
1384 | /* | |
1385 | * Find last successfully processed descriptor | |
1386 | */ | |
1387 | ||
1388 | /* Check and clear descriptor status FIFO entries */ | |
1389 | srd_ptr = priv->omsg_ring[ch].sts_rdptr; | |
1390 | sts_ptr = priv->omsg_ring[ch].sts_base; | |
1391 | j = srd_ptr * 8; | |
1392 | while (sts_ptr[j]) { | |
1393 | for (i = 0; i < 8 && sts_ptr[j]; i++, j++) { | |
1394 | prev_ptr = last_ptr; | |
1395 | last_ptr = le64_to_cpu(sts_ptr[j]); | |
1396 | sts_ptr[j] = 0; | |
1397 | } | |
1398 | ||
1399 | ++srd_ptr; | |
1400 | srd_ptr %= priv->omsg_ring[ch].sts_size; | |
1401 | j = srd_ptr * 8; | |
1402 | } | |
1403 | ||
1404 | if (last_ptr == 0) | |
1405 | goto no_sts_update; | |
1406 | ||
1407 | priv->omsg_ring[ch].sts_rdptr = srd_ptr; | |
1408 | iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch)); | |
1409 | ||
1410 | if (!priv->mport->outb_msg[ch].mcback) | |
1411 | goto no_sts_update; | |
1412 | ||
1413 | /* Inform upper layer about transfer completion */ | |
1414 | ||
1415 | tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/ | |
1416 | sizeof(struct tsi721_omsg_desc); | |
1417 | ||
1418 | /* | |
1419 | * Check if this is a Link Descriptor (LD). | |
1420 | * If yes, ignore LD and use descriptor processed | |
1421 | * before LD. | |
1422 | */ | |
1423 | if (tx_slot == priv->omsg_ring[ch].size) { | |
1424 | if (prev_ptr) | |
1425 | tx_slot = (prev_ptr - | |
1426 | (u64)priv->omsg_ring[ch].omd_phys)/ | |
1427 | sizeof(struct tsi721_omsg_desc); | |
1428 | else | |
1429 | goto no_sts_update; | |
1430 | } | |
1431 | ||
1432 | /* Move slot index to the next message to be sent */ | |
1433 | ++tx_slot; | |
1434 | if (tx_slot == priv->omsg_ring[ch].size) | |
1435 | tx_slot = 0; | |
1436 | BUG_ON(tx_slot >= priv->omsg_ring[ch].size); | |
1437 | priv->mport->outb_msg[ch].mcback(priv->mport, | |
1438 | priv->omsg_ring[ch].dev_id, ch, | |
1439 | tx_slot); | |
1440 | } | |
1441 | ||
1442 | no_sts_update: | |
1443 | ||
1444 | if (omsg_int & TSI721_OBDMAC_INT_ERROR) { | |
1445 | /* | |
1446 | * Outbound message operation aborted due to error, | |
1447 | * reinitialize OB MSG channel | |
1448 | */ | |
1449 | ||
1450 | dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n", | |
1451 | ioread32(priv->regs + TSI721_OBDMAC_STS(ch))); | |
1452 | ||
1453 | iowrite32(TSI721_OBDMAC_INT_ERROR, | |
1454 | priv->regs + TSI721_OBDMAC_INT(ch)); | |
1455 | iowrite32(TSI721_OBDMAC_CTL_INIT, | |
1456 | priv->regs + TSI721_OBDMAC_CTL(ch)); | |
1457 | ioread32(priv->regs + TSI721_OBDMAC_CTL(ch)); | |
1458 | ||
1459 | /* Inform upper level to clear all pending tx slots */ | |
1460 | if (priv->mport->outb_msg[ch].mcback) | |
1461 | priv->mport->outb_msg[ch].mcback(priv->mport, | |
1462 | priv->omsg_ring[ch].dev_id, ch, | |
1463 | priv->omsg_ring[ch].tx_slot); | |
1464 | /* Synch tx_slot tracking */ | |
1465 | iowrite32(priv->omsg_ring[ch].tx_slot, | |
1466 | priv->regs + TSI721_OBDMAC_DRDCNT(ch)); | |
1467 | ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch)); | |
1468 | priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot; | |
1469 | priv->omsg_ring[ch].sts_rdptr = 0; | |
1470 | } | |
1471 | ||
1472 | /* Clear channel interrupts */ | |
1473 | iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch)); | |
1474 | ||
1475 | if (!(priv->flags & TSI721_USING_MSIX)) { | |
1476 | u32 ch_inte; | |
1477 | ||
1478 | /* Re-enable channel interrupts */ | |
1479 | ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1480 | ch_inte |= TSI721_INT_OMSG_CHAN(ch); | |
1481 | iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
1482 | } | |
1483 | ||
1484 | spin_unlock(&priv->omsg_ring[ch].lock); | |
1485 | } | |
1486 | ||
1487 | /** | |
1488 | * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox | |
1489 | * @mport: Master port implementing Outbound Messaging Engine | |
1490 | * @dev_id: Device specific pointer to pass on event | |
1491 | * @mbox: Mailbox to open | |
1492 | * @entries: Number of entries in the outbound mailbox ring | |
1493 | */ | |
1494 | static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, | |
1495 | int mbox, int entries) | |
1496 | { | |
1497 | struct tsi721_device *priv = mport->priv; | |
1498 | struct tsi721_omsg_desc *bd_ptr; | |
1499 | int i, rc = 0; | |
1500 | ||
1501 | if ((entries < TSI721_OMSGD_MIN_RING_SIZE) || | |
1502 | (entries > (TSI721_OMSGD_RING_SIZE)) || | |
1503 | (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { | |
1504 | rc = -EINVAL; | |
1505 | goto out; | |
1506 | } | |
1507 | ||
1508 | priv->omsg_ring[mbox].dev_id = dev_id; | |
1509 | priv->omsg_ring[mbox].size = entries; | |
1510 | priv->omsg_ring[mbox].sts_rdptr = 0; | |
1511 | spin_lock_init(&priv->omsg_ring[mbox].lock); | |
1512 | ||
1513 | /* Outbound Msg Buffer allocation based on | |
1514 | the number of maximum descriptor entries */ | |
1515 | for (i = 0; i < entries; i++) { | |
1516 | priv->omsg_ring[mbox].omq_base[i] = | |
1517 | dma_alloc_coherent( | |
1518 | &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE, | |
1519 | &priv->omsg_ring[mbox].omq_phys[i], | |
1520 | GFP_KERNEL); | |
1521 | if (priv->omsg_ring[mbox].omq_base[i] == NULL) { | |
1522 | dev_dbg(&priv->pdev->dev, | |
1523 | "Unable to allocate OB MSG data buffer for" | |
1524 | " MBOX%d\n", mbox); | |
1525 | rc = -ENOMEM; | |
1526 | goto out_buf; | |
1527 | } | |
1528 | } | |
1529 | ||
1530 | /* Outbound message descriptor allocation */ | |
1531 | priv->omsg_ring[mbox].omd_base = dma_alloc_coherent( | |
1532 | &priv->pdev->dev, | |
1533 | (entries + 1) * sizeof(struct tsi721_omsg_desc), | |
1534 | &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL); | |
1535 | if (priv->omsg_ring[mbox].omd_base == NULL) { | |
1536 | dev_dbg(&priv->pdev->dev, | |
1537 | "Unable to allocate OB MSG descriptor memory " | |
1538 | "for MBOX%d\n", mbox); | |
1539 | rc = -ENOMEM; | |
1540 | goto out_buf; | |
1541 | } | |
1542 | ||
1543 | priv->omsg_ring[mbox].tx_slot = 0; | |
1544 | ||
1545 | /* Outbound message descriptor status FIFO allocation */ | |
1546 | priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); | |
ceb96398 | 1547 | priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, |
48618fb4 AB |
1548 | priv->omsg_ring[mbox].sts_size * |
1549 | sizeof(struct tsi721_dma_sts), | |
1550 | &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); | |
1551 | if (priv->omsg_ring[mbox].sts_base == NULL) { | |
1552 | dev_dbg(&priv->pdev->dev, | |
1553 | "Unable to allocate OB MSG descriptor status FIFO " | |
1554 | "for MBOX%d\n", mbox); | |
1555 | rc = -ENOMEM; | |
1556 | goto out_desc; | |
1557 | } | |
1558 | ||
48618fb4 AB |
1559 | /* |
1560 | * Configure Outbound Messaging Engine | |
1561 | */ | |
1562 | ||
1563 | /* Setup Outbound Message descriptor pointer */ | |
1564 | iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32), | |
1565 | priv->regs + TSI721_OBDMAC_DPTRH(mbox)); | |
1566 | iowrite32(((u64)priv->omsg_ring[mbox].omd_phys & | |
1567 | TSI721_OBDMAC_DPTRL_MASK), | |
1568 | priv->regs + TSI721_OBDMAC_DPTRL(mbox)); | |
1569 | ||
1570 | /* Setup Outbound Message descriptor status FIFO */ | |
1571 | iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32), | |
1572 | priv->regs + TSI721_OBDMAC_DSBH(mbox)); | |
1573 | iowrite32(((u64)priv->omsg_ring[mbox].sts_phys & | |
1574 | TSI721_OBDMAC_DSBL_MASK), | |
1575 | priv->regs + TSI721_OBDMAC_DSBL(mbox)); | |
1576 | iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size), | |
1577 | priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox)); | |
1578 | ||
1579 | /* Enable interrupts */ | |
1580 | ||
1581 | #ifdef CONFIG_PCI_MSI | |
1582 | if (priv->flags & TSI721_USING_MSIX) { | |
1583 | /* Request interrupt service if we are in MSI-X mode */ | |
1584 | rc = request_irq( | |
1585 | priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, | |
1586 | tsi721_omsg_msix, 0, | |
1587 | priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name, | |
1588 | (void *)mport); | |
1589 | ||
1590 | if (rc) { | |
1591 | dev_dbg(&priv->pdev->dev, | |
1592 | "Unable to allocate MSI-X interrupt for " | |
1593 | "OBOX%d-DONE\n", mbox); | |
1594 | goto out_stat; | |
1595 | } | |
1596 | ||
1597 | rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, | |
1598 | tsi721_omsg_msix, 0, | |
1599 | priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name, | |
1600 | (void *)mport); | |
1601 | ||
1602 | if (rc) { | |
1603 | dev_dbg(&priv->pdev->dev, | |
1604 | "Unable to allocate MSI-X interrupt for " | |
1605 | "MBOX%d-INT\n", mbox); | |
1606 | free_irq( | |
1607 | priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, | |
1608 | (void *)mport); | |
1609 | goto out_stat; | |
1610 | } | |
1611 | } | |
1612 | #endif /* CONFIG_PCI_MSI */ | |
1613 | ||
1614 | tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL); | |
1615 | ||
1616 | /* Initialize Outbound Message descriptors ring */ | |
1617 | bd_ptr = priv->omsg_ring[mbox].omd_base; | |
1618 | bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29); | |
1619 | bd_ptr[entries].msg_info = 0; | |
1620 | bd_ptr[entries].next_lo = | |
1621 | cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys & | |
1622 | TSI721_OBDMAC_DPTRL_MASK); | |
1623 | bd_ptr[entries].next_hi = | |
1624 | cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32); | |
1625 | priv->omsg_ring[mbox].wr_count = 0; | |
1626 | mb(); | |
1627 | ||
1628 | /* Initialize Outbound Message engine */ | |
1629 | iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox)); | |
1630 | ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
1631 | udelay(10); | |
1632 | ||
1633 | priv->omsg_init[mbox] = 1; | |
1634 | ||
1635 | return 0; | |
1636 | ||
1637 | #ifdef CONFIG_PCI_MSI | |
1638 | out_stat: | |
1639 | dma_free_coherent(&priv->pdev->dev, | |
1640 | priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), | |
1641 | priv->omsg_ring[mbox].sts_base, | |
1642 | priv->omsg_ring[mbox].sts_phys); | |
1643 | ||
1644 | priv->omsg_ring[mbox].sts_base = NULL; | |
1645 | #endif /* CONFIG_PCI_MSI */ | |
1646 | ||
1647 | out_desc: | |
1648 | dma_free_coherent(&priv->pdev->dev, | |
1649 | (entries + 1) * sizeof(struct tsi721_omsg_desc), | |
1650 | priv->omsg_ring[mbox].omd_base, | |
1651 | priv->omsg_ring[mbox].omd_phys); | |
1652 | ||
1653 | priv->omsg_ring[mbox].omd_base = NULL; | |
1654 | ||
1655 | out_buf: | |
1656 | for (i = 0; i < priv->omsg_ring[mbox].size; i++) { | |
1657 | if (priv->omsg_ring[mbox].omq_base[i]) { | |
1658 | dma_free_coherent(&priv->pdev->dev, | |
1659 | TSI721_MSG_BUFFER_SIZE, | |
1660 | priv->omsg_ring[mbox].omq_base[i], | |
1661 | priv->omsg_ring[mbox].omq_phys[i]); | |
1662 | ||
1663 | priv->omsg_ring[mbox].omq_base[i] = NULL; | |
1664 | } | |
1665 | } | |
1666 | ||
1667 | out: | |
1668 | return rc; | |
1669 | } | |
1670 | ||
1671 | /** | |
1672 | * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox | |
1673 | * @mport: Master port implementing the outbound message unit | |
1674 | * @mbox: Mailbox to close | |
1675 | */ | |
1676 | static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox) | |
1677 | { | |
1678 | struct tsi721_device *priv = mport->priv; | |
1679 | u32 i; | |
1680 | ||
1681 | if (!priv->omsg_init[mbox]) | |
1682 | return; | |
1683 | priv->omsg_init[mbox] = 0; | |
1684 | ||
1685 | /* Disable Interrupts */ | |
1686 | ||
1687 | tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL); | |
1688 | ||
1689 | #ifdef CONFIG_PCI_MSI | |
1690 | if (priv->flags & TSI721_USING_MSIX) { | |
1691 | free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, | |
1692 | (void *)mport); | |
1693 | free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, | |
1694 | (void *)mport); | |
1695 | } | |
1696 | #endif /* CONFIG_PCI_MSI */ | |
1697 | ||
1698 | /* Free OMSG Descriptor Status FIFO */ | |
1699 | dma_free_coherent(&priv->pdev->dev, | |
1700 | priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), | |
1701 | priv->omsg_ring[mbox].sts_base, | |
1702 | priv->omsg_ring[mbox].sts_phys); | |
1703 | ||
1704 | priv->omsg_ring[mbox].sts_base = NULL; | |
1705 | ||
1706 | /* Free OMSG descriptors */ | |
1707 | dma_free_coherent(&priv->pdev->dev, | |
1708 | (priv->omsg_ring[mbox].size + 1) * | |
1709 | sizeof(struct tsi721_omsg_desc), | |
1710 | priv->omsg_ring[mbox].omd_base, | |
1711 | priv->omsg_ring[mbox].omd_phys); | |
1712 | ||
1713 | priv->omsg_ring[mbox].omd_base = NULL; | |
1714 | ||
1715 | /* Free message buffers */ | |
1716 | for (i = 0; i < priv->omsg_ring[mbox].size; i++) { | |
1717 | if (priv->omsg_ring[mbox].omq_base[i]) { | |
1718 | dma_free_coherent(&priv->pdev->dev, | |
1719 | TSI721_MSG_BUFFER_SIZE, | |
1720 | priv->omsg_ring[mbox].omq_base[i], | |
1721 | priv->omsg_ring[mbox].omq_phys[i]); | |
1722 | ||
1723 | priv->omsg_ring[mbox].omq_base[i] = NULL; | |
1724 | } | |
1725 | } | |
1726 | } | |
1727 | ||
1728 | /** | |
1729 | * tsi721_imsg_handler - Inbound Message Interrupt Handler | |
1730 | * @priv: pointer to tsi721 private data | |
1731 | * @ch: inbound message channel number to service | |
1732 | * | |
1733 | * Services channel interrupts from inbound messaging engine. | |
1734 | */ | |
1735 | static void tsi721_imsg_handler(struct tsi721_device *priv, int ch) | |
1736 | { | |
1737 | u32 mbox = ch - 4; | |
1738 | u32 imsg_int; | |
1739 | ||
1740 | spin_lock(&priv->imsg_ring[mbox].lock); | |
1741 | ||
1742 | imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch)); | |
1743 | ||
1744 | if (imsg_int & TSI721_IBDMAC_INT_SRTO) | |
1745 | dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n", | |
1746 | mbox); | |
1747 | ||
1748 | if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR) | |
1749 | dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n", | |
1750 | mbox); | |
1751 | ||
1752 | if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW) | |
1753 | dev_info(&priv->pdev->dev, | |
1754 | "IB MBOX%d IB free queue low\n", mbox); | |
1755 | ||
1756 | /* Clear IB channel interrupts */ | |
1757 | iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch)); | |
1758 | ||
1759 | /* If an IB Msg is received notify the upper layer */ | |
1760 | if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV && | |
1761 | priv->mport->inb_msg[mbox].mcback) | |
1762 | priv->mport->inb_msg[mbox].mcback(priv->mport, | |
1763 | priv->imsg_ring[mbox].dev_id, mbox, -1); | |
1764 | ||
1765 | if (!(priv->flags & TSI721_USING_MSIX)) { | |
1766 | u32 ch_inte; | |
1767 | ||
1768 | /* Re-enable channel interrupts */ | |
1769 | ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
1770 | ch_inte |= TSI721_INT_IMSG_CHAN(ch); | |
1771 | iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
1772 | } | |
1773 | ||
1774 | spin_unlock(&priv->imsg_ring[mbox].lock); | |
1775 | } | |
1776 | ||
1777 | /** | |
1778 | * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox | |
1779 | * @mport: Master port implementing the Inbound Messaging Engine | |
1780 | * @dev_id: Device specific pointer to pass on event | |
1781 | * @mbox: Mailbox to open | |
1782 | * @entries: Number of entries in the inbound mailbox ring | |
1783 | */ | |
1784 | static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id, | |
1785 | int mbox, int entries) | |
1786 | { | |
1787 | struct tsi721_device *priv = mport->priv; | |
1788 | int ch = mbox + 4; | |
1789 | int i; | |
1790 | u64 *free_ptr; | |
1791 | int rc = 0; | |
1792 | ||
1793 | if ((entries < TSI721_IMSGD_MIN_RING_SIZE) || | |
1794 | (entries > TSI721_IMSGD_RING_SIZE) || | |
1795 | (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { | |
1796 | rc = -EINVAL; | |
1797 | goto out; | |
1798 | } | |
1799 | ||
1800 | /* Initialize IB Messaging Ring */ | |
1801 | priv->imsg_ring[mbox].dev_id = dev_id; | |
1802 | priv->imsg_ring[mbox].size = entries; | |
1803 | priv->imsg_ring[mbox].rx_slot = 0; | |
1804 | priv->imsg_ring[mbox].desc_rdptr = 0; | |
1805 | priv->imsg_ring[mbox].fq_wrptr = 0; | |
1806 | for (i = 0; i < priv->imsg_ring[mbox].size; i++) | |
1807 | priv->imsg_ring[mbox].imq_base[i] = NULL; | |
1808 | spin_lock_init(&priv->imsg_ring[mbox].lock); | |
1809 | ||
1810 | /* Allocate buffers for incoming messages */ | |
1811 | priv->imsg_ring[mbox].buf_base = | |
1812 | dma_alloc_coherent(&priv->pdev->dev, | |
1813 | entries * TSI721_MSG_BUFFER_SIZE, | |
1814 | &priv->imsg_ring[mbox].buf_phys, | |
1815 | GFP_KERNEL); | |
1816 | ||
1817 | if (priv->imsg_ring[mbox].buf_base == NULL) { | |
1818 | dev_err(&priv->pdev->dev, | |
1819 | "Failed to allocate buffers for IB MBOX%d\n", mbox); | |
1820 | rc = -ENOMEM; | |
1821 | goto out; | |
1822 | } | |
1823 | ||
1824 | /* Allocate memory for circular free list */ | |
1825 | priv->imsg_ring[mbox].imfq_base = | |
1826 | dma_alloc_coherent(&priv->pdev->dev, | |
1827 | entries * 8, | |
1828 | &priv->imsg_ring[mbox].imfq_phys, | |
1829 | GFP_KERNEL); | |
1830 | ||
1831 | if (priv->imsg_ring[mbox].imfq_base == NULL) { | |
1832 | dev_err(&priv->pdev->dev, | |
1833 | "Failed to allocate free queue for IB MBOX%d\n", mbox); | |
1834 | rc = -ENOMEM; | |
1835 | goto out_buf; | |
1836 | } | |
1837 | ||
1838 | /* Allocate memory for Inbound message descriptors */ | |
1839 | priv->imsg_ring[mbox].imd_base = | |
1840 | dma_alloc_coherent(&priv->pdev->dev, | |
1841 | entries * sizeof(struct tsi721_imsg_desc), | |
1842 | &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL); | |
1843 | ||
1844 | if (priv->imsg_ring[mbox].imd_base == NULL) { | |
1845 | dev_err(&priv->pdev->dev, | |
1846 | "Failed to allocate descriptor memory for IB MBOX%d\n", | |
1847 | mbox); | |
1848 | rc = -ENOMEM; | |
1849 | goto out_dma; | |
1850 | } | |
1851 | ||
1852 | /* Fill free buffer pointer list */ | |
1853 | free_ptr = priv->imsg_ring[mbox].imfq_base; | |
1854 | for (i = 0; i < entries; i++) | |
1855 | free_ptr[i] = cpu_to_le64( | |
1856 | (u64)(priv->imsg_ring[mbox].buf_phys) + | |
1857 | i * 0x1000); | |
1858 | ||
1859 | mb(); | |
1860 | ||
1861 | /* | |
1862 | * For mapping of inbound SRIO Messages into appropriate queues we need | |
1863 | * to set Inbound Device ID register in the messaging engine. We do it | |
1864 | * once when first inbound mailbox is requested. | |
1865 | */ | |
1866 | if (!(priv->flags & TSI721_IMSGID_SET)) { | |
1867 | iowrite32((u32)priv->mport->host_deviceid, | |
1868 | priv->regs + TSI721_IB_DEVID); | |
1869 | priv->flags |= TSI721_IMSGID_SET; | |
1870 | } | |
1871 | ||
1872 | /* | |
1873 | * Configure Inbound Messaging channel (ch = mbox + 4) | |
1874 | */ | |
1875 | ||
1876 | /* Setup Inbound Message free queue */ | |
1877 | iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32), | |
1878 | priv->regs + TSI721_IBDMAC_FQBH(ch)); | |
1879 | iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys & | |
1880 | TSI721_IBDMAC_FQBL_MASK), | |
1881 | priv->regs+TSI721_IBDMAC_FQBL(ch)); | |
1882 | iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), | |
1883 | priv->regs + TSI721_IBDMAC_FQSZ(ch)); | |
1884 | ||
1885 | /* Setup Inbound Message descriptor queue */ | |
1886 | iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32), | |
1887 | priv->regs + TSI721_IBDMAC_DQBH(ch)); | |
1888 | iowrite32(((u32)priv->imsg_ring[mbox].imd_phys & | |
1889 | (u32)TSI721_IBDMAC_DQBL_MASK), | |
1890 | priv->regs+TSI721_IBDMAC_DQBL(ch)); | |
1891 | iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), | |
1892 | priv->regs + TSI721_IBDMAC_DQSZ(ch)); | |
1893 | ||
1894 | /* Enable interrupts */ | |
1895 | ||
1896 | #ifdef CONFIG_PCI_MSI | |
1897 | if (priv->flags & TSI721_USING_MSIX) { | |
1898 | /* Request interrupt service if we are in MSI-X mode */ | |
1899 | rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, | |
1900 | tsi721_imsg_msix, 0, | |
1901 | priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name, | |
1902 | (void *)mport); | |
1903 | ||
1904 | if (rc) { | |
1905 | dev_dbg(&priv->pdev->dev, | |
1906 | "Unable to allocate MSI-X interrupt for " | |
1907 | "IBOX%d-DONE\n", mbox); | |
1908 | goto out_desc; | |
1909 | } | |
1910 | ||
1911 | rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, | |
1912 | tsi721_imsg_msix, 0, | |
1913 | priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name, | |
1914 | (void *)mport); | |
1915 | ||
1916 | if (rc) { | |
1917 | dev_dbg(&priv->pdev->dev, | |
1918 | "Unable to allocate MSI-X interrupt for " | |
1919 | "IBOX%d-INT\n", mbox); | |
1920 | free_irq( | |
1921 | priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, | |
1922 | (void *)mport); | |
1923 | goto out_desc; | |
1924 | } | |
1925 | } | |
1926 | #endif /* CONFIG_PCI_MSI */ | |
1927 | ||
1928 | tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL); | |
1929 | ||
1930 | /* Initialize Inbound Message Engine */ | |
1931 | iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch)); | |
1932 | ioread32(priv->regs + TSI721_IBDMAC_CTL(ch)); | |
1933 | udelay(10); | |
1934 | priv->imsg_ring[mbox].fq_wrptr = entries - 1; | |
1935 | iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch)); | |
1936 | ||
1937 | priv->imsg_init[mbox] = 1; | |
1938 | return 0; | |
1939 | ||
1940 | #ifdef CONFIG_PCI_MSI | |
1941 | out_desc: | |
1942 | dma_free_coherent(&priv->pdev->dev, | |
1943 | priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), | |
1944 | priv->imsg_ring[mbox].imd_base, | |
1945 | priv->imsg_ring[mbox].imd_phys); | |
1946 | ||
1947 | priv->imsg_ring[mbox].imd_base = NULL; | |
1948 | #endif /* CONFIG_PCI_MSI */ | |
1949 | ||
1950 | out_dma: | |
1951 | dma_free_coherent(&priv->pdev->dev, | |
1952 | priv->imsg_ring[mbox].size * 8, | |
1953 | priv->imsg_ring[mbox].imfq_base, | |
1954 | priv->imsg_ring[mbox].imfq_phys); | |
1955 | ||
1956 | priv->imsg_ring[mbox].imfq_base = NULL; | |
1957 | ||
1958 | out_buf: | |
1959 | dma_free_coherent(&priv->pdev->dev, | |
1960 | priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, | |
1961 | priv->imsg_ring[mbox].buf_base, | |
1962 | priv->imsg_ring[mbox].buf_phys); | |
1963 | ||
1964 | priv->imsg_ring[mbox].buf_base = NULL; | |
1965 | ||
1966 | out: | |
1967 | return rc; | |
1968 | } | |
1969 | ||
1970 | /** | |
1971 | * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox | |
1972 | * @mport: Master port implementing the Inbound Messaging Engine | |
1973 | * @mbox: Mailbox to close | |
1974 | */ | |
1975 | static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox) | |
1976 | { | |
1977 | struct tsi721_device *priv = mport->priv; | |
1978 | u32 rx_slot; | |
1979 | int ch = mbox + 4; | |
1980 | ||
1981 | if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */ | |
1982 | return; | |
1983 | priv->imsg_init[mbox] = 0; | |
1984 | ||
1985 | /* Disable Inbound Messaging Engine */ | |
1986 | ||
1987 | /* Disable Interrupts */ | |
1988 | tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK); | |
1989 | ||
1990 | #ifdef CONFIG_PCI_MSI | |
1991 | if (priv->flags & TSI721_USING_MSIX) { | |
1992 | free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, | |
1993 | (void *)mport); | |
1994 | free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, | |
1995 | (void *)mport); | |
1996 | } | |
1997 | #endif /* CONFIG_PCI_MSI */ | |
1998 | ||
1999 | /* Clear Inbound Buffer Queue */ | |
2000 | for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++) | |
2001 | priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; | |
2002 | ||
2003 | /* Free memory allocated for message buffers */ | |
2004 | dma_free_coherent(&priv->pdev->dev, | |
2005 | priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, | |
2006 | priv->imsg_ring[mbox].buf_base, | |
2007 | priv->imsg_ring[mbox].buf_phys); | |
2008 | ||
2009 | priv->imsg_ring[mbox].buf_base = NULL; | |
2010 | ||
2011 | /* Free memory allocated for free pointr list */ | |
2012 | dma_free_coherent(&priv->pdev->dev, | |
2013 | priv->imsg_ring[mbox].size * 8, | |
2014 | priv->imsg_ring[mbox].imfq_base, | |
2015 | priv->imsg_ring[mbox].imfq_phys); | |
2016 | ||
2017 | priv->imsg_ring[mbox].imfq_base = NULL; | |
2018 | ||
2019 | /* Free memory allocated for RX descriptors */ | |
2020 | dma_free_coherent(&priv->pdev->dev, | |
2021 | priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), | |
2022 | priv->imsg_ring[mbox].imd_base, | |
2023 | priv->imsg_ring[mbox].imd_phys); | |
2024 | ||
2025 | priv->imsg_ring[mbox].imd_base = NULL; | |
2026 | } | |
2027 | ||
2028 | /** | |
2029 | * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue | |
2030 | * @mport: Master port implementing the Inbound Messaging Engine | |
2031 | * @mbox: Inbound mailbox number | |
2032 | * @buf: Buffer to add to inbound queue | |
2033 | */ | |
2034 | static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) | |
2035 | { | |
2036 | struct tsi721_device *priv = mport->priv; | |
2037 | u32 rx_slot; | |
2038 | int rc = 0; | |
2039 | ||
2040 | rx_slot = priv->imsg_ring[mbox].rx_slot; | |
2041 | if (priv->imsg_ring[mbox].imq_base[rx_slot]) { | |
2042 | dev_err(&priv->pdev->dev, | |
2043 | "Error adding inbound buffer %d, buffer exists\n", | |
2044 | rx_slot); | |
2045 | rc = -EINVAL; | |
2046 | goto out; | |
2047 | } | |
2048 | ||
2049 | priv->imsg_ring[mbox].imq_base[rx_slot] = buf; | |
2050 | ||
2051 | if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size) | |
2052 | priv->imsg_ring[mbox].rx_slot = 0; | |
2053 | ||
2054 | out: | |
2055 | return rc; | |
2056 | } | |
2057 | ||
2058 | /** | |
2059 | * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue | |
2060 | * @mport: Master port implementing the Inbound Messaging Engine | |
2061 | * @mbox: Inbound mailbox number | |
2062 | * | |
2063 | * Returns pointer to the message on success or NULL on failure. | |
2064 | */ | |
2065 | static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox) | |
2066 | { | |
2067 | struct tsi721_device *priv = mport->priv; | |
2068 | struct tsi721_imsg_desc *desc; | |
2069 | u32 rx_slot; | |
2070 | void *rx_virt = NULL; | |
2071 | u64 rx_phys; | |
2072 | void *buf = NULL; | |
2073 | u64 *free_ptr; | |
2074 | int ch = mbox + 4; | |
2075 | int msg_size; | |
2076 | ||
2077 | if (!priv->imsg_init[mbox]) | |
2078 | return NULL; | |
2079 | ||
2080 | desc = priv->imsg_ring[mbox].imd_base; | |
2081 | desc += priv->imsg_ring[mbox].desc_rdptr; | |
2082 | ||
2083 | if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO)) | |
2084 | goto out; | |
2085 | ||
2086 | rx_slot = priv->imsg_ring[mbox].rx_slot; | |
2087 | while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) { | |
2088 | if (++rx_slot == priv->imsg_ring[mbox].size) | |
2089 | rx_slot = 0; | |
2090 | } | |
2091 | ||
2092 | rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) | | |
2093 | le32_to_cpu(desc->bufptr_lo); | |
2094 | ||
2095 | rx_virt = priv->imsg_ring[mbox].buf_base + | |
2096 | (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys); | |
2097 | ||
2098 | buf = priv->imsg_ring[mbox].imq_base[rx_slot]; | |
2099 | msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT; | |
2100 | if (msg_size == 0) | |
2101 | msg_size = RIO_MAX_MSG_SIZE; | |
2102 | ||
2103 | memcpy(buf, rx_virt, msg_size); | |
2104 | priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; | |
2105 | ||
2106 | desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO); | |
2107 | if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size) | |
2108 | priv->imsg_ring[mbox].desc_rdptr = 0; | |
2109 | ||
2110 | iowrite32(priv->imsg_ring[mbox].desc_rdptr, | |
2111 | priv->regs + TSI721_IBDMAC_DQRP(ch)); | |
2112 | ||
2113 | /* Return free buffer into the pointer list */ | |
2114 | free_ptr = priv->imsg_ring[mbox].imfq_base; | |
2115 | free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys); | |
2116 | ||
2117 | if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size) | |
2118 | priv->imsg_ring[mbox].fq_wrptr = 0; | |
2119 | ||
2120 | iowrite32(priv->imsg_ring[mbox].fq_wrptr, | |
2121 | priv->regs + TSI721_IBDMAC_FQWP(ch)); | |
2122 | out: | |
2123 | return buf; | |
2124 | } | |
2125 | ||
2126 | /** | |
2127 | * tsi721_messages_init - Initialization of Messaging Engine | |
2128 | * @priv: pointer to tsi721 private data | |
2129 | * | |
2130 | * Configures Tsi721 messaging engine. | |
2131 | */ | |
2132 | static int tsi721_messages_init(struct tsi721_device *priv) | |
2133 | { | |
2134 | int ch; | |
2135 | ||
2136 | iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG); | |
2137 | iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT); | |
2138 | iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT); | |
2139 | ||
2140 | /* Set SRIO Message Request/Response Timeout */ | |
2141 | iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO); | |
2142 | ||
2143 | /* Initialize Inbound Messaging Engine Registers */ | |
2144 | for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) { | |
2145 | /* Clear interrupt bits */ | |
2146 | iowrite32(TSI721_IBDMAC_INT_MASK, | |
2147 | priv->regs + TSI721_IBDMAC_INT(ch)); | |
2148 | /* Clear Status */ | |
2149 | iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch)); | |
2150 | ||
2151 | iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK, | |
2152 | priv->regs + TSI721_SMSG_ECC_COR_LOG(ch)); | |
2153 | iowrite32(TSI721_SMSG_ECC_NCOR_MASK, | |
2154 | priv->regs + TSI721_SMSG_ECC_NCOR(ch)); | |
2155 | } | |
2156 | ||
2157 | return 0; | |
2158 | } | |
2159 | ||
2160 | /** | |
2161 | * tsi721_disable_ints - disables all device interrupts | |
2162 | * @priv: pointer to tsi721 private data | |
2163 | */ | |
2164 | static void tsi721_disable_ints(struct tsi721_device *priv) | |
2165 | { | |
2166 | int ch; | |
2167 | ||
2168 | /* Disable all device level interrupts */ | |
2169 | iowrite32(0, priv->regs + TSI721_DEV_INTE); | |
2170 | ||
2171 | /* Disable all Device Channel interrupts */ | |
2172 | iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE); | |
2173 | ||
2174 | /* Disable all Inbound Msg Channel interrupts */ | |
2175 | for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) | |
2176 | iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
2177 | ||
2178 | /* Disable all Outbound Msg Channel interrupts */ | |
2179 | for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++) | |
2180 | iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
2181 | ||
2182 | /* Disable all general messaging interrupts */ | |
2183 | iowrite32(0, priv->regs + TSI721_SMSG_INTE); | |
2184 | ||
2185 | /* Disable all BDMA Channel interrupts */ | |
2186 | for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) | |
9eaa3d9b AB |
2187 | iowrite32(0, |
2188 | priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE); | |
48618fb4 AB |
2189 | |
2190 | /* Disable all general BDMA interrupts */ | |
2191 | iowrite32(0, priv->regs + TSI721_BDMA_INTE); | |
2192 | ||
2193 | /* Disable all SRIO Channel interrupts */ | |
2194 | for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++) | |
2195 | iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch)); | |
2196 | ||
2197 | /* Disable all general SR2PC interrupts */ | |
2198 | iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE); | |
2199 | ||
2200 | /* Disable all PC2SR interrupts */ | |
2201 | iowrite32(0, priv->regs + TSI721_PC2SR_INTE); | |
2202 | ||
2203 | /* Disable all I2C interrupts */ | |
2204 | iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE); | |
2205 | ||
2206 | /* Disable SRIO MAC interrupts */ | |
2207 | iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
2208 | iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN); | |
2209 | } | |
2210 | ||
2211 | /** | |
2212 | * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port | |
2213 | * @priv: pointer to tsi721 private data | |
2214 | * | |
2215 | * Configures Tsi721 as RapidIO master port. | |
2216 | */ | |
305c891e | 2217 | static int tsi721_setup_mport(struct tsi721_device *priv) |
48618fb4 AB |
2218 | { |
2219 | struct pci_dev *pdev = priv->pdev; | |
2220 | int err = 0; | |
2221 | struct rio_ops *ops; | |
2222 | ||
2223 | struct rio_mport *mport; | |
2224 | ||
2225 | ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); | |
2226 | if (!ops) { | |
2227 | dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n"); | |
2228 | return -ENOMEM; | |
2229 | } | |
2230 | ||
2231 | ops->lcread = tsi721_lcread; | |
2232 | ops->lcwrite = tsi721_lcwrite; | |
2233 | ops->cread = tsi721_cread_dma; | |
2234 | ops->cwrite = tsi721_cwrite_dma; | |
2235 | ops->dsend = tsi721_dsend; | |
2236 | ops->open_inb_mbox = tsi721_open_inb_mbox; | |
2237 | ops->close_inb_mbox = tsi721_close_inb_mbox; | |
2238 | ops->open_outb_mbox = tsi721_open_outb_mbox; | |
2239 | ops->close_outb_mbox = tsi721_close_outb_mbox; | |
2240 | ops->add_outb_message = tsi721_add_outb_message; | |
2241 | ops->add_inb_buffer = tsi721_add_inb_buffer; | |
2242 | ops->get_inb_message = tsi721_get_inb_message; | |
71afe341 AB |
2243 | ops->map_inb = tsi721_rio_map_inb_mem; |
2244 | ops->unmap_inb = tsi721_rio_unmap_inb_mem; | |
48618fb4 AB |
2245 | |
2246 | mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); | |
2247 | if (!mport) { | |
2248 | kfree(ops); | |
2249 | dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n"); | |
2250 | return -ENOMEM; | |
2251 | } | |
2252 | ||
2253 | mport->ops = ops; | |
2254 | mport->index = 0; | |
2255 | mport->sys_size = 0; /* small system */ | |
2256 | mport->phy_type = RIO_PHY_SERIAL; | |
2257 | mport->priv = (void *)priv; | |
2258 | mport->phys_efptr = 0x100; | |
2aaf308b | 2259 | mport->dev.parent = &pdev->dev; |
9eaa3d9b | 2260 | priv->mport = mport; |
48618fb4 AB |
2261 | |
2262 | INIT_LIST_HEAD(&mport->dbells); | |
2263 | ||
2264 | rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); | |
b439e66f AB |
2265 | rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); |
2266 | rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); | |
ed43f44f AB |
2267 | snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)", |
2268 | dev_driver_string(&pdev->dev), dev_name(&pdev->dev)); | |
48618fb4 AB |
2269 | |
2270 | /* Hook up interrupt handler */ | |
2271 | ||
2272 | #ifdef CONFIG_PCI_MSI | |
2273 | if (!tsi721_enable_msix(priv)) | |
2274 | priv->flags |= TSI721_USING_MSIX; | |
2275 | else if (!pci_enable_msi(pdev)) | |
2276 | priv->flags |= TSI721_USING_MSI; | |
2277 | else | |
2278 | dev_info(&pdev->dev, | |
2279 | "MSI/MSI-X is not available. Using legacy INTx.\n"); | |
2280 | #endif /* CONFIG_PCI_MSI */ | |
2281 | ||
2282 | err = tsi721_request_irq(mport); | |
2283 | ||
2284 | if (!err) { | |
2285 | tsi721_interrupts_init(priv); | |
2286 | ops->pwenable = tsi721_pw_enable; | |
9eaa3d9b | 2287 | } else { |
48618fb4 AB |
2288 | dev_err(&pdev->dev, "Unable to get assigned PCI IRQ " |
2289 | "vector %02X err=0x%x\n", pdev->irq, err); | |
9eaa3d9b AB |
2290 | goto err_exit; |
2291 | } | |
48618fb4 | 2292 | |
9eaa3d9b AB |
2293 | #ifdef CONFIG_RAPIDIO_DMA_ENGINE |
2294 | tsi721_register_dma(priv); | |
2295 | #endif | |
48618fb4 AB |
2296 | /* Enable SRIO link */ |
2297 | iowrite32(ioread32(priv->regs + TSI721_DEVCTL) | | |
2298 | TSI721_DEVCTL_SRBOOT_CMPL, | |
2299 | priv->regs + TSI721_DEVCTL); | |
2300 | ||
2301 | rio_register_mport(mport); | |
48618fb4 AB |
2302 | |
2303 | if (mport->host_deviceid >= 0) | |
2304 | iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | | |
2305 | RIO_PORT_GEN_DISCOVERED, | |
2306 | priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); | |
2307 | else | |
2308 | iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); | |
2309 | ||
2310 | return 0; | |
9eaa3d9b AB |
2311 | |
2312 | err_exit: | |
2313 | kfree(mport); | |
2314 | kfree(ops); | |
2315 | return err; | |
48618fb4 AB |
2316 | } |
2317 | ||
305c891e | 2318 | static int tsi721_probe(struct pci_dev *pdev, |
48618fb4 AB |
2319 | const struct pci_device_id *id) |
2320 | { | |
2321 | struct tsi721_device *priv; | |
48618fb4 | 2322 | int err; |
48618fb4 AB |
2323 | |
2324 | priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL); | |
2325 | if (priv == NULL) { | |
2326 | dev_err(&pdev->dev, "Failed to allocate memory for device\n"); | |
2327 | err = -ENOMEM; | |
2328 | goto err_exit; | |
2329 | } | |
2330 | ||
2331 | err = pci_enable_device(pdev); | |
2332 | if (err) { | |
2333 | dev_err(&pdev->dev, "Failed to enable PCI device\n"); | |
2334 | goto err_clean; | |
2335 | } | |
2336 | ||
2337 | priv->pdev = pdev; | |
2338 | ||
2339 | #ifdef DEBUG | |
9a9a9a7a AB |
2340 | { |
2341 | int i; | |
48618fb4 AB |
2342 | for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { |
2343 | dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", | |
2344 | i, (unsigned long long)pci_resource_start(pdev, i), | |
2345 | (unsigned long)pci_resource_len(pdev, i), | |
2346 | pci_resource_flags(pdev, i)); | |
2347 | } | |
9a9a9a7a | 2348 | } |
48618fb4 AB |
2349 | #endif |
2350 | /* | |
2351 | * Verify BAR configuration | |
2352 | */ | |
2353 | ||
2354 | /* BAR_0 (registers) must be 512KB+ in 32-bit address space */ | |
2355 | if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) || | |
2356 | pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 || | |
2357 | pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) { | |
2358 | dev_err(&pdev->dev, | |
2359 | "Missing or misconfigured CSR BAR0, aborting.\n"); | |
2360 | err = -ENODEV; | |
2361 | goto err_disable_pdev; | |
2362 | } | |
2363 | ||
2364 | /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */ | |
2365 | if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) || | |
2366 | pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 || | |
2367 | pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) { | |
2368 | dev_err(&pdev->dev, | |
2369 | "Missing or misconfigured Doorbell BAR1, aborting.\n"); | |
2370 | err = -ENODEV; | |
2371 | goto err_disable_pdev; | |
2372 | } | |
2373 | ||
2374 | /* | |
2375 | * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address | |
2376 | * space. | |
2377 | * NOTE: BAR_2 and BAR_4 are not used by this version of driver. | |
2378 | * It may be a good idea to keep them disabled using HW configuration | |
2379 | * to save PCI memory space. | |
2380 | */ | |
2381 | if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) && | |
2382 | (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) { | |
2383 | dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n"); | |
2384 | } | |
2385 | ||
2386 | if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) && | |
2387 | (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) { | |
2388 | dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n"); | |
2389 | } | |
2390 | ||
2391 | err = pci_request_regions(pdev, DRV_NAME); | |
2392 | if (err) { | |
2393 | dev_err(&pdev->dev, "Cannot obtain PCI resources, " | |
2394 | "aborting.\n"); | |
2395 | goto err_disable_pdev; | |
2396 | } | |
2397 | ||
2398 | pci_set_master(pdev); | |
2399 | ||
2400 | priv->regs = pci_ioremap_bar(pdev, BAR_0); | |
2401 | if (!priv->regs) { | |
2402 | dev_err(&pdev->dev, | |
2403 | "Unable to map device registers space, aborting\n"); | |
2404 | err = -ENOMEM; | |
2405 | goto err_free_res; | |
2406 | } | |
2407 | ||
2408 | priv->odb_base = pci_ioremap_bar(pdev, BAR_1); | |
2409 | if (!priv->odb_base) { | |
2410 | dev_err(&pdev->dev, | |
2411 | "Unable to map outbound doorbells space, aborting\n"); | |
2412 | err = -ENOMEM; | |
2413 | goto err_unmap_bars; | |
2414 | } | |
2415 | ||
2416 | /* Configure DMA attributes. */ | |
2417 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { | |
18f6287f PST |
2418 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
2419 | if (err) { | |
48618fb4 AB |
2420 | dev_info(&pdev->dev, "Unable to set DMA mask\n"); |
2421 | goto err_unmap_bars; | |
2422 | } | |
2423 | ||
2424 | if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) | |
2425 | dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); | |
2426 | } else { | |
2427 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
2428 | if (err) | |
2429 | dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); | |
2430 | } | |
2431 | ||
5cdaaf8a | 2432 | BUG_ON(!pci_is_pcie(pdev)); |
1cee22b7 AB |
2433 | |
2434 | /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */ | |
5cdaaf8a JL |
2435 | pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, |
2436 | PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN | | |
2437 | PCI_EXP_DEVCTL_NOSNOOP_EN, | |
2438 | 0x2 << MAX_READ_REQUEST_SZ_SHIFT); | |
1cee22b7 AB |
2439 | |
2440 | /* Adjust PCIe completion timeout. */ | |
5cdaaf8a | 2441 | pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2); |
48618fb4 AB |
2442 | |
2443 | /* | |
2444 | * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block | |
2445 | */ | |
2446 | pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01); | |
2447 | pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL, | |
2448 | TSI721_MSIXTBL_OFFSET); | |
2449 | pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA, | |
2450 | TSI721_MSIXPBA_OFFSET); | |
2451 | pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0); | |
2452 | /* End of FIXUP */ | |
2453 | ||
2454 | tsi721_disable_ints(priv); | |
2455 | ||
2456 | tsi721_init_pc2sr_mapping(priv); | |
2457 | tsi721_init_sr2pc_mapping(priv); | |
2458 | ||
9eaa3d9b | 2459 | if (tsi721_bdma_maint_init(priv)) { |
48618fb4 AB |
2460 | dev_err(&pdev->dev, "BDMA initialization failed, aborting\n"); |
2461 | err = -ENOMEM; | |
2462 | goto err_unmap_bars; | |
2463 | } | |
2464 | ||
2465 | err = tsi721_doorbell_init(priv); | |
2466 | if (err) | |
2467 | goto err_free_bdma; | |
2468 | ||
2469 | tsi721_port_write_init(priv); | |
2470 | ||
2471 | err = tsi721_messages_init(priv); | |
2472 | if (err) | |
2473 | goto err_free_consistent; | |
2474 | ||
2475 | err = tsi721_setup_mport(priv); | |
2476 | if (err) | |
2477 | goto err_free_consistent; | |
2478 | ||
2479 | return 0; | |
2480 | ||
2481 | err_free_consistent: | |
2482 | tsi721_doorbell_free(priv); | |
2483 | err_free_bdma: | |
9eaa3d9b | 2484 | tsi721_bdma_maint_free(priv); |
48618fb4 AB |
2485 | err_unmap_bars: |
2486 | if (priv->regs) | |
2487 | iounmap(priv->regs); | |
2488 | if (priv->odb_base) | |
2489 | iounmap(priv->odb_base); | |
2490 | err_free_res: | |
2491 | pci_release_regions(pdev); | |
2492 | pci_clear_master(pdev); | |
2493 | err_disable_pdev: | |
2494 | pci_disable_device(pdev); | |
2495 | err_clean: | |
2496 | kfree(priv); | |
2497 | err_exit: | |
2498 | return err; | |
2499 | } | |
2500 | ||
2501 | static DEFINE_PCI_DEVICE_TABLE(tsi721_pci_tbl) = { | |
2502 | { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) }, | |
2503 | { 0, } /* terminate list */ | |
2504 | }; | |
2505 | ||
2506 | MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl); | |
2507 | ||
2508 | static struct pci_driver tsi721_driver = { | |
2509 | .name = "tsi721", | |
2510 | .id_table = tsi721_pci_tbl, | |
2511 | .probe = tsi721_probe, | |
2512 | }; | |
2513 | ||
2514 | static int __init tsi721_init(void) | |
2515 | { | |
2516 | return pci_register_driver(&tsi721_driver); | |
2517 | } | |
2518 | ||
48618fb4 | 2519 | device_initcall(tsi721_init); |
94d9bd45 AB |
2520 | |
2521 | MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver"); | |
2522 | MODULE_AUTHOR("Integrated Device Technology, Inc."); | |
2523 | MODULE_LICENSE("GPL"); |