]>
Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 32 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
33 | help |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
37 | |
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
40 | help |
41 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
42 | current regulator API which provides sysfs controls for |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
ba7e4763 | 45 | |
c6d678b6 | 46 | If unsure, say no. |
ba7e4763 | 47 | |
1d98cccf MR |
48 | config REGULATOR_USERSPACE_CONSUMER |
49 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
50 | help |
51 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 52 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
53 | control power supplies for such devices. |
54 | ||
c6d678b6 | 55 | If unsure, say no. |
1d98cccf | 56 | |
a265b03b AM |
57 | config REGULATOR_88PG86X |
58 | tristate "Marvell 88PG86X voltage regulators" | |
59 | depends on I2C | |
60 | select REGMAP_I2C | |
61 | help | |
62 | This driver supports Marvell 88PG867 and 88PG868 voltage regulators. | |
63 | They provide two I2C-controlled DC/DC step-down converters with | |
64 | sleep mode and separate enable pins. | |
65 | ||
95f1dc08 CX |
66 | config REGULATOR_88PM800 |
67 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 68 | depends on MFD_88PM800 |
95f1dc08 CX |
69 | help |
70 | This driver supports Marvell 88PM800 voltage regulator chips. | |
71 | It delivers digitally programmable output, | |
72 | the voltage is programmed via I2C interface. | |
73 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
74 | various voltages. | |
75 | ||
82b736df | 76 | config REGULATOR_88PM8607 |
631a1fc4 | 77 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 78 | depends on MFD_88PM860X=y |
3f0292ae | 79 | help |
82b736df | 80 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 81 | |
33036f48 WY |
82 | config REGULATOR_ACT8865 |
83 | tristate "Active-semi act8865 voltage regulator" | |
84 | depends on I2C | |
85 | select REGMAP_I2C | |
86 | help | |
87 | This driver controls a active-semi act8865 voltage output | |
88 | regulator via I2C bus. | |
89 | ||
38c09961 WY |
90 | config REGULATOR_ACT8945A |
91 | tristate "Active-semi ACT8945A voltage regulator" | |
92 | depends on MFD_ACT8945A | |
93 | help | |
94 | This driver controls a active-semi ACT8945A voltage regulator | |
95 | via I2C bus. The ACT8945A features three step-down DC/DC converters | |
96 | and four low-dropout linear regulators, along with a ActivePath | |
97 | battery charger. | |
98 | ||
dfb9b8a4 AL |
99 | config REGULATOR_AD5398 |
100 | tristate "Analog Devices AD5398/AD5821 regulators" | |
101 | depends on I2C | |
0eb5d5ab | 102 | help |
dfb9b8a4 AL |
103 | This driver supports AD5398 and AD5821 current regulator chips. |
104 | If building into module, its name is ad5398.ko. | |
105 | ||
82b736df MB |
106 | config REGULATOR_ANATOP |
107 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
108 | depends on MFD_SYSCON | |
109 | help | |
110 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
111 | regulators. It is recommended that this option be | |
112 | enabled on i.MX6 platform. | |
113 | ||
dfb9b8a4 AL |
114 | config REGULATOR_AAT2870 |
115 | tristate "AnalogicTech AAT2870 Regulators" | |
116 | depends on MFD_AAT2870_CORE | |
117 | help | |
118 | If you have a AnalogicTech AAT2870 say Y to enable the | |
119 | regulator driver. | |
120 | ||
82b736df MB |
121 | config REGULATOR_AB3100 |
122 | tristate "ST-Ericsson AB3100 Regulator functions" | |
123 | depends on AB3100_CORE | |
124 | default y if AB3100_CORE | |
125 | help | |
126 | These regulators correspond to functionality in the | |
127 | AB3100 analog baseband dealing with power regulators | |
128 | for the system. | |
129 | ||
130 | config REGULATOR_AB8500 | |
131 | bool "ST-Ericsson AB8500 Power Regulators" | |
132 | depends on AB8500_CORE | |
133 | help | |
134 | This driver supports the regulators found on the ST-Ericsson mixed | |
135 | signal AB8500 PMIC | |
136 | ||
7e642596 RF |
137 | config REGULATOR_ARIZONA_LDO1 |
138 | tristate "Wolfson Arizona class devices LDO1" | |
b667a45d | 139 | depends on MFD_ARIZONA |
e6ed9058 | 140 | depends on SND_SOC |
b667a45d | 141 | help |
7e642596 RF |
142 | Support for the LDO1 regulators found on Wolfson Arizona class |
143 | devices. | |
144 | ||
145 | config REGULATOR_ARIZONA_MICSUPP | |
146 | tristate "Wolfson Arizona class devices MICSUPP" | |
147 | depends on MFD_ARIZONA | |
148 | depends on SND_SOC | |
149 | help | |
150 | Support for the MICSUPP regulators found on Wolfson Arizona class | |
b667a45d MB |
151 | devices. |
152 | ||
82b736df MB |
153 | config REGULATOR_AS3711 |
154 | tristate "AS3711 PMIC" | |
155 | depends on MFD_AS3711 | |
156 | help | |
157 | This driver provides support for the voltage regulators on the | |
158 | AS3711 PMIC | |
159 | ||
bc407334 LD |
160 | config REGULATOR_AS3722 |
161 | tristate "AMS AS3722 PMIC Regulators" | |
162 | depends on MFD_AS3722 | |
163 | help | |
164 | This driver provides support for the voltage regulators on the | |
165 | AS3722 PMIC. This will enable support for all the software | |
166 | controllable DCDC/LDO regulators. | |
167 | ||
dfe7a1b0 CC |
168 | config REGULATOR_AXP20X |
169 | tristate "X-POWERS AXP20X PMIC Regulators" | |
170 | depends on MFD_AXP20X | |
171 | help | |
172 | This driver provides support for the voltage regulators on the | |
173 | AXP20X PMIC. | |
174 | ||
462c9fc5 MP |
175 | config REGULATOR_BCM590XX |
176 | tristate "Broadcom BCM590xx PMU Regulators" | |
177 | depends on MFD_BCM590XX | |
178 | help | |
179 | This driver provides support for the voltage regulators on the | |
180 | BCM590xx PMUs. This will enable support for the software | |
181 | controllable LDO/Switching regulators. | |
182 | ||
e85c5a15 MV |
183 | config REGULATOR_BD9571MWV |
184 | tristate "ROHM BD9571MWV Regulators" | |
185 | depends on MFD_BD9571MWV | |
186 | help | |
187 | This driver provides support for the voltage regulators on the | |
188 | ROHM BD9571MWV PMIC. This will enable support for the software | |
189 | controllable regulator and voltage sampling units. | |
190 | ||
191 | This driver can also be built as a module. If so, the module | |
192 | will be called bd9571mwv-regulator. | |
193 | ||
0ad4c07e TL |
194 | config REGULATOR_CPCAP |
195 | tristate "Motorola CPCAP regulator" | |
196 | depends on MFD_CPCAP | |
197 | help | |
198 | Say y here for CPCAP regulator found on some Motorola phones | |
199 | and tablets such as Droid 4. | |
200 | ||
dfb9b8a4 AL |
201 | config REGULATOR_DA903X |
202 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
203 | depends on PMIC_DA903X | |
204 | help | |
205 | Say y here to support the BUCKs and LDOs regulators found on | |
206 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
207 | ||
208 | config REGULATOR_DA9052 | |
209 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
210 | depends on PMIC_DA9052 | |
211 | help | |
212 | This driver supports the voltage regulators of DA9052-BC and | |
213 | DA9053-AA/Bx PMIC. | |
214 | ||
f6130be6 AJ |
215 | config REGULATOR_DA9055 |
216 | tristate "Dialog Semiconductor DA9055 regulators" | |
217 | depends on MFD_DA9055 | |
218 | help | |
219 | Say y here to support the BUCKs and LDOs regulators found on | |
220 | Dialog Semiconductor DA9055 PMIC. | |
221 | ||
222 | This driver can also be built as a module. If so, the module | |
223 | will be called da9055-regulator. | |
224 | ||
4068e518 | 225 | config REGULATOR_DA9062 |
4b7f4958 | 226 | tristate "Dialog Semiconductor DA9061/62 regulators" |
4068e518 T |
227 | depends on MFD_DA9062 |
228 | help | |
229 | Say y here to support the BUCKs and LDOs regulators found on | |
4b7f4958 | 230 | DA9061 and DA9062 PMICs. |
4068e518 T |
231 | |
232 | This driver can also be built as a module. If so, the module | |
233 | will be called da9062-regulator. | |
234 | ||
69ca3e58 KG |
235 | config REGULATOR_DA9063 |
236 | tristate "Dialog Semiconductor DA9063 regulators" | |
237 | depends on MFD_DA9063 | |
238 | help | |
239 | Say y here to support the BUCKs and LDOs regulators found on | |
240 | DA9063 PMICs. | |
241 | ||
242 | This driver can also be built as a module. If so, the module | |
243 | will be called da9063-regulator. | |
244 | ||
16f10918 ST |
245 | config REGULATOR_DA9210 |
246 | tristate "Dialog Semiconductor DA9210 regulator" | |
247 | depends on I2C | |
248 | select REGMAP_I2C | |
249 | help | |
250 | Say y here to support for the Dialog Semiconductor DA9210. | |
251 | The DA9210 is a multi-phase synchronous step down | |
252 | converter 12A DC-DC Buck controlled through an I2C | |
1028a37d JB |
253 | interface. |
254 | ||
255 | config REGULATOR_DA9211 | |
707ce9ea | 256 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" |
1028a37d JB |
257 | depends on I2C |
258 | select REGMAP_I2C | |
259 | help | |
005547e0 | 260 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
7bd39354 JB |
261 | /DA9213/DA9214/DA9215. |
262 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
005547e0 | 263 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
16f10918 ST |
264 | interface. |
265 | ||
82b736df MB |
266 | config REGULATOR_DBX500_PRCMU |
267 | bool | |
268 | ||
269 | config REGULATOR_DB8500_PRCMU | |
270 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
271 | depends on MFD_DB8500_PRCMU | |
272 | select REGULATOR_DBX500_PRCMU | |
273 | help | |
274 | This driver supports the voltage domain regulators controlled by the | |
275 | DB8500 PRCMU | |
276 | ||
49d8c599 YZ |
277 | config REGULATOR_FAN53555 |
278 | tristate "Fairchild FAN53555 Regulator" | |
279 | depends on I2C | |
280 | select REGMAP_I2C | |
281 | help | |
282 | This driver supports Fairchild FAN53555 Digitally Programmable | |
283 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
284 | regulator that delivers a digitally programmable output from an | |
285 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
286 | programmed through an I2C interface. | |
287 | ||
82b736df MB |
288 | config REGULATOR_GPIO |
289 | tristate "GPIO regulator support" | |
9eac5fdf | 290 | depends on GPIOLIB || COMPILE_TEST |
e3e5aff7 | 291 | help |
82b736df MB |
292 | This driver provides support for regulators that can be |
293 | controlled via gpios. | |
294 | It is capable of supporting current and voltage regulators | |
295 | and the platform has to provide a mapping of GPIO-states | |
296 | to target volts/amps. | |
e3e5aff7 | 297 | |
87ca186f GX |
298 | config REGULATOR_HI6421 |
299 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
300 | depends on MFD_HI6421_PMIC && OF | |
301 | help | |
302 | This driver provides support for the voltage regulators on the | |
303 | HiSilicon Hi6421 PMU / Codec IC. | |
304 | Hi6421 is a multi-function device which, on regulator part, provides | |
305 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
306 | of them come with support to either ECO (idle) or sleep mode. | |
307 | ||
5c7024ae WX |
308 | config REGULATOR_HI6421V530 |
309 | tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" | |
310 | depends on MFD_HI6421_PMIC && OF | |
311 | help | |
312 | This driver provides support for the voltage regulators on | |
313 | HiSilicon Hi6421v530 PMU / Codec IC. | |
314 | Hi6421v530 is a multi-function device which, on regulator part, | |
315 | provides 5 general purpose LDOs, and all of them come with support | |
316 | to either ECO (idle) or sleep mode. | |
317 | ||
4618119b CF |
318 | config REGULATOR_HI655X |
319 | tristate "Hisilicon HI655X PMIC regulators support" | |
320 | depends on ARCH_HISI || COMPILE_TEST | |
321 | depends on MFD_HI655X_PMIC && OF | |
322 | help | |
323 | This driver provides support for the voltage regulators of the | |
324 | Hisilicon Hi655x PMIC device. | |
325 | ||
dec38b5c MB |
326 | config REGULATOR_ISL9305 |
327 | tristate "Intersil ISL9305 regulator" | |
328 | depends on I2C | |
ba441ec2 | 329 | select REGMAP_I2C |
dec38b5c MB |
330 | help |
331 | This driver supports ISL9305 voltage regulator chip. | |
332 | ||
82b736df MB |
333 | config REGULATOR_ISL6271A |
334 | tristate "Intersil ISL6271A Power regulator" | |
335 | depends on I2C | |
336 | help | |
337 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 338 | |
3a8d1a73 MK |
339 | config REGULATOR_LM363X |
340 | tristate "TI LM363X voltage regulators" | |
341 | depends on MFD_TI_LMU | |
342 | help | |
343 | This driver supports LM3631 and LM3632 voltage regulators for | |
344 | the LCD bias. | |
345 | One boost output voltage is configurable and always on. | |
346 | Other LDOs are used for the display module. | |
347 | ||
82b736df MB |
348 | config REGULATOR_LP3971 |
349 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
350 | depends on I2C | |
dfb9b8a4 | 351 | help |
82b736df MB |
352 | Say Y here to support the voltage regulators and convertors |
353 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 354 | |
82b736df MB |
355 | config REGULATOR_LP3972 |
356 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
357 | depends on I2C | |
dfb9b8a4 | 358 | help |
82b736df MB |
359 | Say Y here to support the voltage regulators and convertors |
360 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 361 | |
82b736df | 362 | config REGULATOR_LP872X |
631a1fc4 | 363 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 364 | depends on I2C |
82b736df MB |
365 | select REGMAP_I2C |
366 | help | |
367 | This driver supports LP8720/LP8725 PMIC | |
368 | ||
994aae32 K |
369 | config REGULATOR_LP873X |
370 | tristate "TI LP873X Power regulators" | |
f618ed21 | 371 | depends on MFD_TI_LP873X && OF |
994aae32 K |
372 | help |
373 | This driver supports LP873X voltage regulator chips. LP873X | |
374 | provides two step-down converters and two general-purpose LDO | |
375 | voltage regulators. It supports software based voltage control | |
376 | for different voltage domains | |
377 | ||
82b736df MB |
378 | config REGULATOR_LP8755 |
379 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 380 | depends on I2C |
82b736df | 381 | select REGMAP_I2C |
dfb9b8a4 | 382 | help |
82b736df MB |
383 | This driver supports LP8755 High Performance PMU driver. This |
384 | chip contains six step-down DC/DC converters which can support | |
385 | 9 mode multiphase configuration. | |
dfb9b8a4 | 386 | |
f0168a9b K |
387 | config REGULATOR_LP87565 |
388 | tristate "TI LP87565 Power regulators" | |
389 | depends on MFD_TI_LP87565 && OF | |
390 | help | |
391 | This driver supports LP87565 voltage regulator chips. LP87565 | |
392 | provides four step-down converters. It supports software based | |
393 | voltage control for different voltage domains | |
394 | ||
82b736df | 395 | config REGULATOR_LP8788 |
631a1fc4 | 396 | tristate "TI LP8788 Power Regulators" |
82b736df | 397 | depends on MFD_LP8788 |
dfb9b8a4 | 398 | help |
82b736df | 399 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 400 | |
3eb2c7ec | 401 | config REGULATOR_LTC3589 |
ac1d6868 AL |
402 | tristate "LTC3589 8-output voltage regulator" |
403 | depends on I2C | |
404 | select REGMAP_I2C | |
3eb2c7ec PZ |
405 | help |
406 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
407 | 8-output regulators controlled via I2C. | |
408 | ||
37b918a0 TH |
409 | config REGULATOR_LTC3676 |
410 | tristate "LTC3676 8-output voltage regulator" | |
411 | depends on I2C | |
412 | select REGMAP_I2C | |
413 | help | |
414 | This enables support for the LTC3676 | |
415 | 8-output regulators controlled via I2C. | |
416 | ||
b0902bbe | 417 | config REGULATOR_MAX14577 |
8a82b408 | 418 | tristate "Maxim 14577/77836 regulator" |
b0902bbe KK |
419 | depends on MFD_MAX14577 |
420 | help | |
8a82b408 KK |
421 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
422 | The MAX14577 regulators include safeout LDO and charger current | |
423 | regulator. The MAX77836 has two additional LDOs. | |
b0902bbe | 424 | |
55f4fa4e RJ |
425 | config REGULATOR_MAX1586 |
426 | tristate "Maxim 1586/1587 voltage regulator" | |
427 | depends on I2C | |
55f4fa4e RJ |
428 | help |
429 | This driver controls a Maxim 1586 or 1587 voltage output | |
430 | regulator via I2C bus. The provided regulator is suitable | |
431 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
432 | ||
5b1c2028 LD |
433 | config REGULATOR_MAX77620 |
434 | tristate "Maxim 77620/MAX20024 voltage regulator" | |
435 | depends on MFD_MAX77620 | |
436 | help | |
437 | This driver controls Maxim MAX77620 voltage output regulator | |
438 | via I2C bus. The provided regulator is suitable for Tegra | |
439 | chip to control Step-Down DC-DC and LDOs. Say Y here to | |
440 | enable the regulator driver. | |
441 | ||
a71b797f HZ |
442 | config REGULATOR_MAX8649 |
443 | tristate "Maxim 8649 voltage regulator" | |
444 | depends on I2C | |
c5b68d47 | 445 | select REGMAP_I2C |
a71b797f HZ |
446 | help |
447 | This driver controls a Maxim 8649 voltage output regulator via | |
448 | I2C bus. | |
449 | ||
27f37e4b WS |
450 | config REGULATOR_MAX8660 |
451 | tristate "Maxim 8660/8661 voltage regulator" | |
452 | depends on I2C | |
453 | help | |
454 | This driver controls a Maxim 8660/8661 voltage output | |
455 | regulator via I2C bus. | |
456 | ||
ffee1909 GY |
457 | config REGULATOR_MAX8907 |
458 | tristate "Maxim 8907 voltage regulator" | |
459 | depends on MFD_MAX8907 | |
460 | help | |
461 | This driver controls a Maxim 8907 voltage output regulator | |
462 | via I2C bus. The provided regulator is suitable for Tegra | |
463 | chip to control Step-Down DC-DC and LDOs. | |
464 | ||
08ff6f2a HZ |
465 | config REGULATOR_MAX8925 |
466 | tristate "Maxim MAX8925 Power Management IC" | |
467 | depends on MFD_MAX8925 | |
468 | help | |
469 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
470 | ||
202f4f53 MH |
471 | config REGULATOR_MAX8952 |
472 | tristate "Maxim MAX8952 Power Management IC" | |
473 | depends on I2C | |
474 | help | |
475 | This driver controls a Maxim 8952 voltage output regulator | |
476 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
477 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
478 | ||
5928f538 LD |
479 | config REGULATOR_MAX8973 |
480 | tristate "Maxim MAX8973 voltage regulator " | |
481 | depends on I2C | |
d2d5437b | 482 | depends on THERMAL && THERMAL_OF |
5928f538 LD |
483 | select REGMAP_I2C |
484 | help | |
485 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
486 | switching regulator delievers up to 9A of output current. Each | |
487 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
488 | from the adjacent phase, allowing the use of small magnetic component. | |
489 | ||
bd6ca2cf MH |
490 | config REGULATOR_MAX8997 |
491 | tristate "Maxim 8997/8966 regulator" | |
492 | depends on MFD_MAX8997 | |
493 | help | |
494 | This driver controls a Maxim 8997/8966 regulator | |
495 | via I2C bus. The provided regulator is suitable for S5PC110, | |
496 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
497 | VCC_USIM voltages. | |
498 | ||
156f2528 KP |
499 | config REGULATOR_MAX8998 |
500 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 501 | depends on MFD_MAX8998 |
156f2528 KP |
502 | help |
503 | This driver controls a Maxim 8998 voltage output regulator | |
504 | via I2C bus. The provided regulator is suitable for S3C6410 | |
505 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
506 | ||
133d4016 JL |
507 | config REGULATOR_MAX77686 |
508 | tristate "Maxim 77686 regulator" | |
509 | depends on MFD_MAX77686 | |
510 | help | |
511 | This driver controls a Maxim 77686 regulator | |
512 | via I2C bus. The provided regulator is suitable for | |
513 | Exynos-4 chips to control VARM and VINT voltages. | |
514 | ||
80b022e2 | 515 | config REGULATOR_MAX77693 |
9e9a08e8 KK |
516 | tristate "Maxim 77693/77843 regulator" |
517 | depends on (MFD_MAX77693 || MFD_MAX77843) | |
80b022e2 | 518 | help |
9e9a08e8 | 519 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
80b022e2 JL |
520 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
521 | and one current regulator 'CHARGER'. This is suitable for | |
9e9a08e8 | 522 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
80b022e2 | 523 | |
e6f2f805 JMC |
524 | config REGULATOR_MAX77802 |
525 | tristate "Maxim 77802 regulator" | |
526 | depends on MFD_MAX77686 | |
527 | help | |
528 | This driver controls a Maxim 77802 regulator | |
529 | via I2C bus. The provided regulator is suitable for | |
530 | Exynos5420/Exynos5800 SoCs to control various voltages. | |
531 | It includes support for control of voltage and ramp speed. | |
532 | ||
82b736df MB |
533 | config REGULATOR_MC13XXX_CORE |
534 | tristate | |
5ec271e7 | 535 | |
82b736df MB |
536 | config REGULATOR_MC13783 |
537 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 538 | depends on MFD_MC13XXX |
82b736df | 539 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 540 | help |
82b736df MB |
541 | Say y here to support the regulators found on the Freescale MC13783 |
542 | PMIC. | |
0cbdf7bc | 543 | |
82b736df MB |
544 | config REGULATOR_MC13892 |
545 | tristate "Freescale MC13892 regulator driver" | |
546 | depends on MFD_MC13XXX | |
547 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 548 | help |
82b736df MB |
549 | Say y here to support the regulators found on the Freescale MC13892 |
550 | PMIC. | |
5976f095 | 551 | |
8766018b HC |
552 | config REGULATOR_MT6311 |
553 | tristate "MediaTek MT6311 PMIC" | |
554 | depends on I2C | |
aab3c3f3 | 555 | select REGMAP_I2C |
8766018b HC |
556 | help |
557 | Say y here to select this option to enable the power regulator of | |
558 | MediaTek MT6311 PMIC. | |
559 | This driver supports the control of different power rails of device | |
560 | through regulator interface. | |
561 | ||
2fdf8292 CZ |
562 | config REGULATOR_MT6323 |
563 | tristate "MediaTek MT6323 PMIC" | |
564 | depends on MFD_MT6397 | |
565 | help | |
566 | Say y here to select this option to enable the power regulator of | |
567 | MediaTek MT6323 PMIC. | |
568 | This driver supports the control of different power rails of device | |
a551e273 CX |
569 | through regulator interface. |
570 | ||
571 | config REGULATOR_MT6380 | |
572 | tristate "MediaTek MT6380 PMIC" | |
573 | depends on MTK_PMIC_WRAP | |
574 | help | |
575 | Say y here to select this option to enable the power regulator of | |
576 | MediaTek MT6380 PMIC. | |
577 | This driver supports the control of different power rails of device | |
2fdf8292 CZ |
578 | through regulator interface. |
579 | ||
0425e242 FF |
580 | config REGULATOR_MT6397 |
581 | tristate "MediaTek MT6397 PMIC" | |
582 | depends on MFD_MT6397 | |
583 | help | |
584 | Say y here to select this option to enable the power regulator of | |
585 | MediaTek MT6397 PMIC. | |
586 | This driver supports the control of different power rails of device | |
587 | through regulator interface. | |
588 | ||
82b736df MB |
589 | config REGULATOR_PALMAS |
590 | tristate "TI Palmas PMIC Regulators" | |
591 | depends on MFD_PALMAS | |
af8b5fc3 | 592 | help |
82b736df MB |
593 | If you wish to control the regulators on the Palmas series of |
594 | chips say Y here. This will enable support for all the software | |
595 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 596 | |
82b736df MB |
597 | The regulators available on Palmas series chips vary depending |
598 | on the muxing. This is handled automatically in the driver by | |
599 | reading the mux info from OTP. | |
b59320cc | 600 | |
11469e0b B |
601 | config REGULATOR_PBIAS |
602 | tristate "PBIAS OMAP regulator driver" | |
603 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
604 | help | |
605 | Say y here to support pbias regulator for mmc1:SD card i/o | |
606 | on OMAP SoCs. | |
607 | This driver provides support for OMAP pbias modelled | |
608 | regulators. | |
609 | ||
82b736df MB |
610 | config REGULATOR_PCAP |
611 | tristate "Motorola PCAP2 regulator driver" | |
612 | depends on EZX_PCAP | |
ade7515f | 613 | help |
82b736df MB |
614 | This driver provides support for the voltage regulators of the |
615 | PCAP2 PMIC. | |
ade7515f | 616 | |
dfb9b8a4 AL |
617 | config REGULATOR_PCF50633 |
618 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 619 | depends on MFD_PCF50633 |
295c08bc | 620 | help |
dfb9b8a4 AL |
621 | Say Y here to support the voltage regulators and convertors |
622 | on PCF50633 | |
295c08bc | 623 | |
3784b6d6 | 624 | config REGULATOR_PFUZE100 |
af2c55cd | 625 | tristate "Freescale PFUZE100/200/3000 regulator driver" |
3784b6d6 | 626 | depends on I2C |
94421b05 | 627 | select REGMAP_I2C |
3784b6d6 | 628 | help |
2cee2121 | 629 | Say y here to support the regulators found on the Freescale |
af2c55cd | 630 | PFUZE100/200/3000 PMIC. |
3784b6d6 | 631 | |
f307a7e9 JB |
632 | config REGULATOR_PV88060 |
633 | tristate "Powerventure Semiconductor PV88060 regulator" | |
634 | depends on I2C | |
635 | select REGMAP_I2C | |
636 | help | |
637 | Say y here to support the voltage regulators and convertors | |
638 | PV88060 | |
639 | ||
99cf3af5 JB |
640 | config REGULATOR_PV88080 |
641 | tristate "Powerventure Semiconductor PV88080 regulator" | |
642 | depends on I2C | |
643 | select REGMAP_I2C | |
644 | help | |
645 | Say y here to support the buck convertors on PV88080 | |
646 | ||
c90456e3 JB |
647 | config REGULATOR_PV88090 |
648 | tristate "Powerventure Semiconductor PV88090 regulator" | |
649 | depends on I2C | |
650 | select REGMAP_I2C | |
651 | help | |
652 | Say y here to support the voltage regulators and convertors | |
653 | on PV88090 | |
654 | ||
aa66cc66 CZ |
655 | config REGULATOR_PWM |
656 | tristate "PWM voltage regulator" | |
657 | depends on PWM | |
658 | help | |
659 | This driver supports PWM controlled voltage regulators. PWM | |
660 | duty cycle can increase or decrease the voltage. | |
661 | ||
2720386e BA |
662 | config REGULATOR_QCOM_RPM |
663 | tristate "Qualcomm RPM regulator driver" | |
664 | depends on MFD_QCOM_RPM | |
665 | help | |
666 | If you say yes to this option, support will be included for the | |
667 | regulators exposed by the Resource Power Manager found in Qualcomm | |
668 | 8660, 8960 and 8064 based devices. | |
669 | ||
670 | Say M here if you want to include support for the regulators on the | |
671 | Qualcomm RPM as a module. The module will be named | |
672 | "qcom_rpm-regulator". | |
673 | ||
da65e367 BA |
674 | config REGULATOR_QCOM_SMD_RPM |
675 | tristate "Qualcomm SMD based RPM regulator driver" | |
676 | depends on QCOM_SMD_RPM | |
677 | help | |
678 | If you say yes to this option, support will be included for the | |
679 | regulators exposed by the Resource Power Manager found in Qualcomm | |
680 | 8974 based devices. | |
681 | ||
682 | Say M here if you want to include support for the regulators on the | |
683 | Qualcomm RPM as a module. The module will be named | |
684 | "qcom_smd-regulator". | |
685 | ||
e92a4047 SB |
686 | config REGULATOR_QCOM_SPMI |
687 | tristate "Qualcomm SPMI regulator driver" | |
688 | depends on SPMI || COMPILE_TEST | |
689 | help | |
690 | If you say yes to this option, support will be included for the | |
691 | regulators found in Qualcomm SPMI PMICs. | |
692 | ||
693 | Say M here if you want to include support for the regulators on the | |
694 | Qualcomm SPMI PMICs as a module. The module will be named | |
695 | "qcom_spmi-regulator". | |
696 | ||
6ffc3270 LD |
697 | config REGULATOR_RC5T583 |
698 | tristate "RICOH RC5T583 Power regulators" | |
699 | depends on MFD_RC5T583 | |
700 | help | |
701 | Select this option to enable the power regulator of RICOH | |
702 | PMIC RC5T583. | |
703 | This driver supports the control of different power rails of device | |
704 | through regulator interface. The device supports multiple DCDC/LDO | |
705 | outputs which can be controlled by i2c communication. | |
706 | ||
2cd64ae3 | 707 | config REGULATOR_RK808 |
c4e0d344 | 708 | tristate "Rockchip RK805/RK808/RK818 Power regulators" |
2cd64ae3 CZ |
709 | depends on MFD_RK808 |
710 | help | |
711 | Select this option to enable the power regulator of ROCKCHIP | |
c4e0d344 | 712 | PMIC RK805,RK808 and RK818. |
2cd64ae3 CZ |
713 | This driver supports the control of different power rails of device |
714 | through regulator interface. The device supports multiple DCDC/LDO | |
715 | outputs which can be controlled by i2c communication. | |
716 | ||
811b7006 | 717 | config REGULATOR_RN5T618 |
ed6d362d | 718 | tristate "Ricoh RN5T567/618 voltage regulators" |
811b7006 BG |
719 | depends on MFD_RN5T618 |
720 | help | |
83b2a3c2 PHH |
721 | Say y here to support the regulators found on Ricoh RN5T567, |
722 | RN5T618 or RC5T619 PMIC. | |
811b7006 | 723 | |
b1917578 BS |
724 | config REGULATOR_RT5033 |
725 | tristate "Richtek RT5033 Regulators" | |
726 | depends on MFD_RT5033 | |
727 | help | |
728 | This adds support for voltage and current regulators in Richtek | |
729 | RT5033 PMIC. The device supports multiple regulators like | |
730 | current source, LDO and Buck. | |
731 | ||
f1879271 SK |
732 | config REGULATOR_S2MPA01 |
733 | tristate "Samsung S2MPA01 voltage regulator" | |
734 | depends on MFD_SEC_CORE | |
735 | help | |
736 | This driver controls Samsung S2MPA01 voltage output regulator | |
737 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
738 | ||
cb74685e | 739 | config REGULATOR_S2MPS11 |
51af2067 | 740 | tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" |
cb74685e SK |
741 | depends on MFD_SEC_CORE |
742 | help | |
51af2067 | 743 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage |
76b9840b CC |
744 | output regulator via I2C bus. The chip is comprised of high efficient |
745 | Buck converters including Dual-Phase Buck converter, Buck-Boost | |
746 | converter, various LDOs. | |
cb74685e | 747 | |
dfb9b8a4 AL |
748 | config REGULATOR_S5M8767 |
749 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 750 | depends on MFD_SEC_CORE |
5e428d5c | 751 | help |
dfb9b8a4 AL |
752 | This driver supports a Samsung S5M8767A voltage output regulator |
753 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
754 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 755 | |
433c9bb7 EC |
756 | config REGULATOR_SC2731 |
757 | tristate "Spreadtrum SC2731 power regulator driver" | |
758 | depends on MFD_SC27XX_PMIC || COMPILE_TEST | |
759 | help | |
760 | This driver provides support for the voltage regulators on the | |
761 | SC2731 PMIC. | |
762 | ||
9839d627 GY |
763 | config REGULATOR_SKY81452 |
764 | tristate "Skyworks Solutions SKY81452 voltage regulator" | |
70b5b27c | 765 | depends on MFD_SKY81452 |
4a5d3013 | 766 | help |
9839d627 GY |
767 | This driver supports Skyworks SKY81452 voltage output regulator |
768 | via I2C bus. SKY81452 has one voltage linear regulator can be | |
769 | programmed from 4.5V to 20V. | |
770 | ||
771 | This driver can also be built as a module. If so, the module | |
772 | will be called sky81452-regulator. | |
4a5d3013 | 773 | |
0cdbf481 FG |
774 | config REGULATOR_STM32_VREFBUF |
775 | tristate "STMicroelectronics STM32 VREFBUF" | |
776 | depends on ARCH_STM32 || COMPILE_TEST | |
777 | help | |
778 | This driver supports STMicroelectronics STM32 VREFBUF (voltage | |
779 | reference buffer) which can be used as voltage reference for | |
780 | internal ADCs, DACs and also for external components through | |
781 | dedicated Vref+ pin. | |
782 | ||
783 | This driver can also be built as a module. If so, the module | |
784 | will be called stm32-vrefbuf. | |
785 | ||
82b736df | 786 | config REGULATOR_TI_ABB |
631a1fc4 | 787 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 788 | depends on ARCH_OMAP |
4c5dabce | 789 | help |
82b736df MB |
790 | Select this option to support Texas Instruments' on-chip Adaptive Body |
791 | Bias (ABB) LDO regulators. It is recommended that this option be | |
792 | enabled on required TI SoC. Certain Operating Performance Points | |
793 | on TI SoCs may be unstable without enabling this as it provides | |
794 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 795 | |
3615a34e LW |
796 | config REGULATOR_STW481X_VMMC |
797 | bool "ST Microelectronics STW481X VMMC regulator" | |
4049dc1a | 798 | depends on MFD_STW481X || COMPILE_TEST |
3615a34e LW |
799 | default y if MFD_STW481X |
800 | help | |
801 | This driver supports the internal VMMC regulator in the STw481x | |
802 | PMIC chips. | |
803 | ||
0c570674 LD |
804 | config REGULATOR_TPS51632 |
805 | tristate "TI TPS51632 Power Regulator" | |
806 | depends on I2C | |
807 | select REGMAP_I2C | |
808 | help | |
809 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 810 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
811 | with Serial VID control and DVFS. |
812 | The voltage output can be configure through I2C interface or PWM | |
813 | interface. | |
814 | ||
2edd3b69 LW |
815 | config REGULATOR_TPS6105X |
816 | tristate "TI TPS6105X Power regulators" | |
817 | depends on TPS6105X | |
818 | default y if TPS6105X | |
819 | help | |
820 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
821 | It is a single boost converter primarily for white LEDs and | |
822 | audio amplifiers. | |
823 | ||
dfb9b8a4 | 824 | config REGULATOR_TPS62360 |
d1cf4f65 | 825 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
826 | depends on I2C |
827 | select REGMAP_I2C | |
828 | help | |
d1cf4f65 | 829 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
830 | regulator is meant for processor core supply. This chip is |
831 | high-frequency synchronous step down dc-dc converter optimized | |
832 | for battery-powered portable applications. | |
833 | ||
2de79850 AA |
834 | config REGULATOR_TPS65023 |
835 | tristate "TI TPS65023 Power regulators" | |
836 | depends on I2C | |
90923351 | 837 | select REGMAP_I2C |
2de79850 AA |
838 | help |
839 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
840 | three step-down converters and two general-purpose LDO voltage regulators. | |
841 | It supports TI's software based Class-2 SmartReflex implementation. | |
842 | ||
843 | config REGULATOR_TPS6507X | |
844 | tristate "TI TPS6507X Power regulators" | |
845 | depends on I2C | |
846 | help | |
847 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
848 | three step-down converters and two general-purpose LDO voltage regulators. | |
849 | It supports TI's software based Class-2 SmartReflex implementation. | |
850 | ||
d2a2e729 AD |
851 | config REGULATOR_TPS65086 |
852 | tristate "TI TPS65086 Power regulators" | |
853 | depends on MFD_TPS65086 | |
854 | help | |
855 | This driver provides support for the voltage regulators on | |
856 | TI TPS65086 PMICs. | |
857 | ||
452534e5 VB |
858 | config REGULATOR_TPS65090 |
859 | tristate "TI TPS65090 Power regulator" | |
860 | depends on MFD_TPS65090 | |
861 | help | |
862 | This driver provides support for the voltage regulators on the | |
863 | TI TPS65090 PMIC. | |
864 | ||
77c129bf VRT |
865 | config REGULATOR_TPS65132 |
866 | tristate "TI TPS65132 Dual Output Power regulators" | |
867 | depends on I2C && GPIOLIB | |
868 | select REGMAP_I2C | |
869 | help | |
870 | This driver supports TPS65132 single inductor - dual output | |
871 | power supply specifcally designed for display panels. | |
872 | ||
a493077f AC |
873 | config REGULATOR_TPS65217 |
874 | tristate "TI TPS65217 Power regulators" | |
875 | depends on MFD_TPS65217 | |
9260ad98 | 876 | help |
a493077f AC |
877 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
878 | provides three step-down converters and four general-purpose LDO | |
879 | voltage regulators. It supports software based voltage control | |
880 | for different voltage domains | |
9260ad98 | 881 | |
90e7d526 K |
882 | config REGULATOR_TPS65218 |
883 | tristate "TI TPS65218 Power regulators" | |
948838a1 | 884 | depends on MFD_TPS65218 && OF |
90e7d526 K |
885 | help |
886 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
887 | provides six step-down converters and one general-purpose LDO | |
888 | voltage regulators. It supports software based voltage control | |
889 | for different voltage domains | |
890 | ||
1394fd28 CC |
891 | config REGULATOR_TPS6524X |
892 | tristate "TI TPS6524X Power regulators" | |
893 | depends on SPI | |
be0e2d3e | 894 | help |
1394fd28 CC |
895 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
896 | provides three step-down converters and two general-purpose LDO | |
897 | voltage regulators. This device is interfaced using a customized | |
898 | serial interface currently supported on the sequencer serial | |
899 | port controller. | |
be0e2d3e | 900 | |
dfb9b8a4 AL |
901 | config REGULATOR_TPS6586X |
902 | tristate "TI TPS6586X Power regulators" | |
903 | depends on MFD_TPS6586X | |
51bd6943 | 904 | help |
dfb9b8a4 | 905 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 906 | |
518fb721 | 907 | config REGULATOR_TPS65910 |
ae0e6544 | 908 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 909 | depends on MFD_TPS65910 |
8b385d9b | 910 | help |
ae0e6544 | 911 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 912 | |
dfb9b8a4 AL |
913 | config REGULATOR_TPS65912 |
914 | tristate "TI TPS65912 Power regulator" | |
33f9d8c0 | 915 | depends on MFD_TPS65912 |
c789ca20 | 916 | help |
dfb9b8a4 | 917 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 918 | |
1a0bb679 | 919 | config REGULATOR_TPS80031 |
3b063496 | 920 | tristate "TI TPS80031/TPS80032 power regulator driver" |
1a0bb679 LD |
921 | depends on MFD_TPS80031 |
922 | help | |
923 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
924 | Path and Battery Charger. It has 5 configurable step-down | |
925 | converters, 11 general purpose LDOs, VBUS generator and digital | |
926 | output to control regulators. | |
927 | ||
dfb9b8a4 | 928 | config REGULATOR_TWL4030 |
631a1fc4 | 929 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 930 | depends on TWL4030_CORE |
1032fbfd | 931 | help |
dfb9b8a4 AL |
932 | This driver supports the voltage regulators provided by |
933 | this family of companion chips. | |
1032fbfd | 934 | |
9dee7a72 MK |
935 | config REGULATOR_VCTRL |
936 | tristate "Voltage controlled regulators" | |
937 | depends on OF | |
938 | help | |
939 | This driver provides support for voltage regulators whose output | |
940 | voltage is controlled by the voltage of another regulator. | |
941 | ||
31e54086 PM |
942 | config REGULATOR_VEXPRESS |
943 | tristate "Versatile Express regulators" | |
944 | depends on VEXPRESS_CONFIG | |
945 | help | |
946 | This driver provides support for voltage regulators available | |
947 | on the ARM Ltd's Versatile Express platform. | |
948 | ||
dfb9b8a4 AL |
949 | config REGULATOR_WM831X |
950 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
951 | depends on MFD_WM831X | |
49610235 | 952 | help |
dfb9b8a4 AL |
953 | Support the voltage and current regulators of the WM831x series |
954 | of PMIC devices. | |
49610235 | 955 | |
dfb9b8a4 AL |
956 | config REGULATOR_WM8350 |
957 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
958 | depends on MFD_WM8350 | |
1394fd28 | 959 | help |
dfb9b8a4 | 960 | This driver provides support for the voltage and current regulators |
c6d678b6 | 961 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 962 | |
dfb9b8a4 AL |
963 | config REGULATOR_WM8400 |
964 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
965 | depends on MFD_WM8400 | |
518fb721 | 966 | help |
dfb9b8a4 AL |
967 | This driver provides support for the voltage regulators of the |
968 | WM8400 AudioPlus PMIC. | |
518fb721 | 969 | |
dfb9b8a4 AL |
970 | config REGULATOR_WM8994 |
971 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
972 | depends on MFD_WM8994 | |
f7eb6c5e | 973 | help |
dfb9b8a4 AL |
974 | This driver provides support for the voltage regulators on the |
975 | WM8994 CODEC. | |
f7eb6c5e | 976 | |
bbda14df | 977 | endif |
295c08bc | 978 |