]>
Commit | Line | Data |
---|---|---|
ec8f24b7 | 1 | # SPDX-License-Identifier: GPL-2.0-only |
bbda14df | 2 | menuconfig REGULATOR |
ba7e4763 | 3 | bool "Voltage and Current Regulator Support" |
60ab7f41 | 4 | select LINEAR_RANGES |
ba7e4763 LG |
5 | help |
6 | Generic Voltage and Current Regulator support. | |
7 | ||
8 | This framework is designed to provide a generic interface to voltage | |
9 | and current regulators within the Linux kernel. It's intended to | |
10 | provide voltage and current control to client or consumer drivers and | |
11 | also provide status information to user space applications through a | |
12 | sysfs interface. | |
13 | ||
14 | The intention is to allow systems to dynamically control regulator | |
15 | output in order to save power and prolong battery life. This applies | |
16 | to both voltage regulators (where voltage output is controllable) and | |
17 | current sinks (where current output is controllable). | |
18 | ||
19 | This framework safely compiles out if not selected so that client | |
20 | drivers can still be used in systems with no software controllable | |
21 | regulators. | |
22 | ||
23 | If unsure, say no. | |
24 | ||
809d310c | 25 | |
bbda14df TI |
26 | if REGULATOR |
27 | ||
ba7e4763 LG |
28 | config REGULATOR_DEBUG |
29 | bool "Regulator debug support" | |
ba7e4763 LG |
30 | help |
31 | Say yes here to enable debugging support. | |
32 | ||
33 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 34 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
35 | help |
36 | This driver provides support for fixed voltage regulators, | |
37 | useful for systems which use a combination of software | |
38 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
39 | |
40 | config REGULATOR_VIRTUAL_CONSUMER | |
41 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
42 | help |
43 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
44 | current regulator API which provides sysfs controls for |
45 | configuring the supplies requested. This is mainly useful | |
46 | for test purposes. | |
ba7e4763 | 47 | |
c6d678b6 | 48 | If unsure, say no. |
ba7e4763 | 49 | |
1d98cccf MR |
50 | config REGULATOR_USERSPACE_CONSUMER |
51 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
52 | help |
53 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 54 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
55 | control power supplies for such devices. |
56 | ||
c6d678b6 | 57 | If unsure, say no. |
1d98cccf | 58 | |
a265b03b AM |
59 | config REGULATOR_88PG86X |
60 | tristate "Marvell 88PG86X voltage regulators" | |
61 | depends on I2C | |
62 | select REGMAP_I2C | |
63 | help | |
64 | This driver supports Marvell 88PG867 and 88PG868 voltage regulators. | |
65 | They provide two I2C-controlled DC/DC step-down converters with | |
66 | sleep mode and separate enable pins. | |
67 | ||
95f1dc08 CX |
68 | config REGULATOR_88PM800 |
69 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 70 | depends on MFD_88PM800 |
95f1dc08 CX |
71 | help |
72 | This driver supports Marvell 88PM800 voltage regulator chips. | |
73 | It delivers digitally programmable output, | |
74 | the voltage is programmed via I2C interface. | |
75 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
76 | various voltages. | |
77 | ||
82b736df | 78 | config REGULATOR_88PM8607 |
631a1fc4 | 79 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 80 | depends on MFD_88PM860X=y |
3f0292ae | 81 | help |
82b736df | 82 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 83 | |
33036f48 WY |
84 | config REGULATOR_ACT8865 |
85 | tristate "Active-semi act8865 voltage regulator" | |
86 | depends on I2C | |
5375f1ef | 87 | depends on POWER_SUPPLY |
33036f48 WY |
88 | select REGMAP_I2C |
89 | help | |
90 | This driver controls a active-semi act8865 voltage output | |
91 | regulator via I2C bus. | |
92 | ||
38c09961 WY |
93 | config REGULATOR_ACT8945A |
94 | tristate "Active-semi ACT8945A voltage regulator" | |
95 | depends on MFD_ACT8945A | |
96 | help | |
97 | This driver controls a active-semi ACT8945A voltage regulator | |
98 | via I2C bus. The ACT8945A features three step-down DC/DC converters | |
99 | and four low-dropout linear regulators, along with a ActivePath | |
100 | battery charger. | |
101 | ||
dfb9b8a4 AL |
102 | config REGULATOR_AD5398 |
103 | tristate "Analog Devices AD5398/AD5821 regulators" | |
104 | depends on I2C | |
0eb5d5ab | 105 | help |
dfb9b8a4 AL |
106 | This driver supports AD5398 and AD5821 current regulator chips. |
107 | If building into module, its name is ad5398.ko. | |
108 | ||
82b736df MB |
109 | config REGULATOR_ANATOP |
110 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
6179b0e9 | 111 | depends on ARCH_MXC || COMPILE_TEST |
82b736df MB |
112 | depends on MFD_SYSCON |
113 | help | |
114 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
115 | regulators. It is recommended that this option be | |
116 | enabled on i.MX6 platform. | |
117 | ||
dfb9b8a4 AL |
118 | config REGULATOR_AAT2870 |
119 | tristate "AnalogicTech AAT2870 Regulators" | |
120 | depends on MFD_AAT2870_CORE | |
121 | help | |
122 | If you have a AnalogicTech AAT2870 say Y to enable the | |
123 | regulator driver. | |
124 | ||
82b736df MB |
125 | config REGULATOR_AB8500 |
126 | bool "ST-Ericsson AB8500 Power Regulators" | |
127 | depends on AB8500_CORE | |
128 | help | |
129 | This driver supports the regulators found on the ST-Ericsson mixed | |
130 | signal AB8500 PMIC | |
131 | ||
7e642596 | 132 | config REGULATOR_ARIZONA_LDO1 |
1f5f11e7 RF |
133 | tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" |
134 | depends on MFD_ARIZONA || MFD_MADERA | |
e6ed9058 | 135 | depends on SND_SOC |
b667a45d | 136 | help |
1f5f11e7 RF |
137 | Support for the LDO1 regulators found on Cirrus Logic Madera codecs |
138 | and Wolfson Microelectronic Arizona codecs. | |
7e642596 RF |
139 | |
140 | config REGULATOR_ARIZONA_MICSUPP | |
7bd7916d RF |
141 | tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" |
142 | depends on MFD_ARIZONA || MFD_MADERA | |
7e642596 RF |
143 | depends on SND_SOC |
144 | help | |
7bd7916d RF |
145 | Support for the MICSUPP regulators found on Cirrus Logic Madera codecs |
146 | and Wolfson Microelectronic Arizona codecs | |
b667a45d MB |
147 | devices. |
148 | ||
0fbeae70 CM |
149 | config REGULATOR_ARM_SCMI |
150 | tristate "SCMI based regulator driver" | |
151 | depends on ARM_SCMI_PROTOCOL && OF | |
152 | help | |
153 | This adds the regulator driver support for ARM platforms using SCMI | |
154 | protocol for device voltage management. | |
155 | This driver uses SCMI Message Protocol driver to interact with the | |
156 | firmware providing the device Voltage functionality. | |
157 | ||
82b736df MB |
158 | config REGULATOR_AS3711 |
159 | tristate "AS3711 PMIC" | |
160 | depends on MFD_AS3711 | |
161 | help | |
162 | This driver provides support for the voltage regulators on the | |
163 | AS3711 PMIC | |
164 | ||
bc407334 LD |
165 | config REGULATOR_AS3722 |
166 | tristate "AMS AS3722 PMIC Regulators" | |
167 | depends on MFD_AS3722 | |
168 | help | |
169 | This driver provides support for the voltage regulators on the | |
170 | AS3722 PMIC. This will enable support for all the software | |
171 | controllable DCDC/LDO regulators. | |
172 | ||
3b15ccac CC |
173 | config REGULATOR_ATC260X |
174 | tristate "Actions Semi ATC260x PMIC Regulators" | |
175 | depends on MFD_ATC260X | |
176 | help | |
177 | This driver provides support for the voltage regulators on the | |
178 | ATC260x PMICs. This will enable support for all the software | |
179 | controllable DCDC/LDO regulators. | |
180 | ||
dfe7a1b0 CC |
181 | config REGULATOR_AXP20X |
182 | tristate "X-POWERS AXP20X PMIC Regulators" | |
183 | depends on MFD_AXP20X | |
184 | help | |
185 | This driver provides support for the voltage regulators on the | |
186 | AXP20X PMIC. | |
187 | ||
462c9fc5 MP |
188 | config REGULATOR_BCM590XX |
189 | tristate "Broadcom BCM590xx PMU Regulators" | |
190 | depends on MFD_BCM590XX | |
191 | help | |
192 | This driver provides support for the voltage regulators on the | |
193 | BCM590xx PMUs. This will enable support for the software | |
194 | controllable LDO/Switching regulators. | |
195 | ||
1aad3900 MV |
196 | config REGULATOR_BD71815 |
197 | tristate "ROHM BD71815 Power Regulator" | |
198 | depends on MFD_ROHM_BD71828 | |
5ba3747d | 199 | select REGULATOR_ROHM |
1aad3900 MV |
200 | help |
201 | This driver supports voltage regulators on ROHM BD71815 PMIC. | |
202 | This will enable support for the software controllable buck | |
203 | and LDO regulators and a current regulator for LEDs. | |
204 | ||
205 | This driver can also be built as a module. If so, the module | |
206 | will be called bd71815-regulator. | |
207 | ||
522498f8 MV |
208 | config REGULATOR_BD71828 |
209 | tristate "ROHM BD71828 Power Regulator" | |
210 | depends on MFD_ROHM_BD71828 | |
211 | select REGULATOR_ROHM | |
212 | help | |
213 | This driver supports voltage regulators on ROHM BD71828 PMIC. | |
214 | This will enable support for the software controllable buck | |
215 | and LDO regulators. | |
216 | ||
217 | This driver can also be built as a module. If so, the module | |
218 | will be called bd71828-regulator. | |
219 | ||
410e8b4f | 220 | config REGULATOR_BD718XX |
ba08799e | 221 | tristate "ROHM BD71837 Power Regulator" |
410e8b4f | 222 | depends on MFD_ROHM_BD718XX |
21b72156 | 223 | select REGULATOR_ROHM |
ba08799e MV |
224 | help |
225 | This driver supports voltage regulators on ROHM BD71837 PMIC. | |
226 | This will enable support for the software controllable buck | |
227 | and LDO regulators. | |
228 | ||
229 | This driver can also be built as a module. If so, the module | |
2ece646c | 230 | will be called bd718x7-regulator. |
ba08799e | 231 | |
e85c5a15 MV |
232 | config REGULATOR_BD9571MWV |
233 | tristate "ROHM BD9571MWV Regulators" | |
234 | depends on MFD_BD9571MWV | |
235 | help | |
236 | This driver provides support for the voltage regulators on the | |
237 | ROHM BD9571MWV PMIC. This will enable support for the software | |
238 | controllable regulator and voltage sampling units. | |
239 | ||
240 | This driver can also be built as a module. If so, the module | |
241 | will be called bd9571mwv-regulator. | |
242 | ||
b014e9fa MV |
243 | config REGULATOR_BD957XMUF |
244 | tristate "ROHM BD9576MUF and BD9573MUF Regulators" | |
245 | depends on MFD_ROHM_BD957XMUF | |
246 | help | |
247 | This driver supports voltage regulators on ROHM BD9576MUF and | |
248 | BD9573MUF PMICs. | |
249 | ||
250 | This driver can also be built as a module. If so, the module | |
251 | will be called bd9576-regulator. | |
252 | ||
0ad4c07e TL |
253 | config REGULATOR_CPCAP |
254 | tristate "Motorola CPCAP regulator" | |
255 | depends on MFD_CPCAP | |
256 | help | |
257 | Say y here for CPCAP regulator found on some Motorola phones | |
258 | and tablets such as Droid 4. | |
259 | ||
8d9f8d57 PHS |
260 | config REGULATOR_CROS_EC |
261 | tristate "ChromeOS EC regulators" | |
262 | depends on CROS_EC && OF | |
263 | help | |
264 | This driver supports voltage regulators that is connected to ChromeOS | |
265 | EC and controlled through EC host commands. | |
266 | ||
267 | This driver can also be built as a module. If so, the module | |
268 | will be called cros-ec-regulator. | |
269 | ||
dfb9b8a4 AL |
270 | config REGULATOR_DA903X |
271 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
272 | depends on PMIC_DA903X | |
0077aaae | 273 | depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789 |
dfb9b8a4 AL |
274 | help |
275 | Say y here to support the BUCKs and LDOs regulators found on | |
276 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
277 | ||
278 | config REGULATOR_DA9052 | |
279 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
280 | depends on PMIC_DA9052 | |
281 | help | |
282 | This driver supports the voltage regulators of DA9052-BC and | |
283 | DA9053-AA/Bx PMIC. | |
284 | ||
f6130be6 AJ |
285 | config REGULATOR_DA9055 |
286 | tristate "Dialog Semiconductor DA9055 regulators" | |
287 | depends on MFD_DA9055 | |
288 | help | |
289 | Say y here to support the BUCKs and LDOs regulators found on | |
290 | Dialog Semiconductor DA9055 PMIC. | |
291 | ||
292 | This driver can also be built as a module. If so, the module | |
293 | will be called da9055-regulator. | |
294 | ||
4068e518 | 295 | config REGULATOR_DA9062 |
4b7f4958 | 296 | tristate "Dialog Semiconductor DA9061/62 regulators" |
4068e518 T |
297 | depends on MFD_DA9062 |
298 | help | |
299 | Say y here to support the BUCKs and LDOs regulators found on | |
4b7f4958 | 300 | DA9061 and DA9062 PMICs. |
4068e518 T |
301 | |
302 | This driver can also be built as a module. If so, the module | |
303 | will be called da9062-regulator. | |
304 | ||
69ca3e58 KG |
305 | config REGULATOR_DA9063 |
306 | tristate "Dialog Semiconductor DA9063 regulators" | |
973af54c | 307 | depends on MFD_DA9063 && OF |
69ca3e58 KG |
308 | help |
309 | Say y here to support the BUCKs and LDOs regulators found on | |
310 | DA9063 PMICs. | |
311 | ||
312 | This driver can also be built as a module. If so, the module | |
313 | will be called da9063-regulator. | |
314 | ||
e6ff10f2 | 315 | config REGULATOR_DA9121 |
c860476b | 316 | tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" |
e6ff10f2 VW |
317 | depends on I2C && OF |
318 | select REGMAP_I2C | |
319 | help | |
320 | Say y here to support for the Dialog Semiconductor DA9121. The | |
c860476b AW |
321 | DA9121 is a single channel dual-phase buck converter controlled |
322 | through an I2C interface. | |
323 | ||
324 | DA9121 Single-channel dual-phase 10A buck converter | |
325 | DA9130 Single-channel dual-phase 10A buck converter (Automotive) | |
326 | DA9217 Single-channel dual-phase 6A buck converter | |
327 | DA9122 Dual-channel single-phase 5A buck converter | |
328 | DA9131 Dual-channel single-phase 5A buck converter (Automotive) | |
329 | DA9220 Dual-channel single-phase 3A buck converter | |
330 | DA9132 Dual-channel single-phase 3A buck converter (Automotive) | |
e6ff10f2 VW |
331 | |
332 | This driver can also be built as a module. If so, the module | |
333 | will be called da9121-regulator. | |
334 | ||
16f10918 ST |
335 | config REGULATOR_DA9210 |
336 | tristate "Dialog Semiconductor DA9210 regulator" | |
337 | depends on I2C | |
338 | select REGMAP_I2C | |
339 | help | |
340 | Say y here to support for the Dialog Semiconductor DA9210. | |
341 | The DA9210 is a multi-phase synchronous step down | |
342 | converter 12A DC-DC Buck controlled through an I2C | |
1028a37d JB |
343 | interface. |
344 | ||
345 | config REGULATOR_DA9211 | |
707ce9ea | 346 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" |
1028a37d JB |
347 | depends on I2C |
348 | select REGMAP_I2C | |
349 | help | |
005547e0 | 350 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
7bd39354 JB |
351 | /DA9213/DA9214/DA9215. |
352 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
005547e0 | 353 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
16f10918 ST |
354 | interface. |
355 | ||
82b736df MB |
356 | config REGULATOR_DBX500_PRCMU |
357 | bool | |
358 | ||
359 | config REGULATOR_DB8500_PRCMU | |
360 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
361 | depends on MFD_DB8500_PRCMU | |
362 | select REGULATOR_DBX500_PRCMU | |
363 | help | |
364 | This driver supports the voltage domain regulators controlled by the | |
365 | DB8500 PRCMU | |
366 | ||
49d8c599 YZ |
367 | config REGULATOR_FAN53555 |
368 | tristate "Fairchild FAN53555 Regulator" | |
369 | depends on I2C | |
370 | select REGMAP_I2C | |
371 | help | |
372 | This driver supports Fairchild FAN53555 Digitally Programmable | |
373 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
374 | regulator that delivers a digitally programmable output from an | |
375 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
376 | programmed through an I2C interface. | |
377 | ||
e6dea51e CF |
378 | config REGULATOR_FAN53880 |
379 | tristate "Fairchild FAN53880 Regulator" | |
318b8a09 | 380 | depends on I2C && (OF || COMPILE_TEST) |
e6dea51e CF |
381 | select REGMAP_I2C |
382 | help | |
383 | This driver supports Fairchild (ON Semiconductor) FAN53880 | |
384 | regulator. The regulator is a programmable power management IC | |
385 | (PMIC), it is controlled by I2C and provides one BUCK, one BOOST | |
386 | and four LDO outputs. | |
387 | ||
82b736df MB |
388 | config REGULATOR_GPIO |
389 | tristate "GPIO regulator support" | |
9eac5fdf | 390 | depends on GPIOLIB || COMPILE_TEST |
e3e5aff7 | 391 | help |
82b736df MB |
392 | This driver provides support for regulators that can be |
393 | controlled via gpios. | |
394 | It is capable of supporting current and voltage regulators | |
395 | and the platform has to provide a mapping of GPIO-states | |
396 | to target volts/amps. | |
e3e5aff7 | 397 | |
87ca186f GX |
398 | config REGULATOR_HI6421 |
399 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
400 | depends on MFD_HI6421_PMIC && OF | |
401 | help | |
402 | This driver provides support for the voltage regulators on the | |
403 | HiSilicon Hi6421 PMU / Codec IC. | |
404 | Hi6421 is a multi-function device which, on regulator part, provides | |
405 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
406 | of them come with support to either ECO (idle) or sleep mode. | |
407 | ||
5c7024ae WX |
408 | config REGULATOR_HI6421V530 |
409 | tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" | |
410 | depends on MFD_HI6421_PMIC && OF | |
411 | help | |
412 | This driver provides support for the voltage regulators on | |
413 | HiSilicon Hi6421v530 PMU / Codec IC. | |
414 | Hi6421v530 is a multi-function device which, on regulator part, | |
415 | provides 5 general purpose LDOs, and all of them come with support | |
416 | to either ECO (idle) or sleep mode. | |
417 | ||
4618119b CF |
418 | config REGULATOR_HI655X |
419 | tristate "Hisilicon HI655X PMIC regulators support" | |
420 | depends on ARCH_HISI || COMPILE_TEST | |
421 | depends on MFD_HI655X_PMIC && OF | |
422 | help | |
423 | This driver provides support for the voltage regulators of the | |
424 | Hisilicon Hi655x PMIC device. | |
425 | ||
507614ba MCC |
426 | config REGULATOR_HI6421V600 |
427 | tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" | |
428 | depends on MFD_HI6421_SPMI && OF | |
429 | select REGMAP | |
430 | help | |
431 | This driver provides support for the voltage regulators on | |
432 | HiSilicon Hi6421v600 PMU / Codec IC. | |
433 | This is used on Kirin 3670 boards, like HiKey 970. | |
434 | ||
dec38b5c MB |
435 | config REGULATOR_ISL9305 |
436 | tristate "Intersil ISL9305 regulator" | |
437 | depends on I2C | |
ba441ec2 | 438 | select REGMAP_I2C |
dec38b5c MB |
439 | help |
440 | This driver supports ISL9305 voltage regulator chip. | |
441 | ||
82b736df MB |
442 | config REGULATOR_ISL6271A |
443 | tristate "Intersil ISL6271A Power regulator" | |
444 | depends on I2C | |
445 | help | |
446 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 447 | |
3a8d1a73 MK |
448 | config REGULATOR_LM363X |
449 | tristate "TI LM363X voltage regulators" | |
450 | depends on MFD_TI_LMU | |
451 | help | |
bff5e807 | 452 | This driver supports LM3631, LM3632 and LM36274 voltage regulators for |
3a8d1a73 MK |
453 | the LCD bias. |
454 | One boost output voltage is configurable and always on. | |
455 | Other LDOs are used for the display module. | |
456 | ||
bef9391c CK |
457 | config REGULATOR_LOCHNAGAR |
458 | tristate "Cirrus Logic Lochnagar regulator driver" | |
459 | depends on MFD_LOCHNAGAR | |
460 | help | |
461 | This enables regulator support on the Cirrus Logic Lochnagar audio | |
462 | development board. | |
463 | ||
82b736df MB |
464 | config REGULATOR_LP3971 |
465 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
466 | depends on I2C | |
dfb9b8a4 | 467 | help |
82b736df MB |
468 | Say Y here to support the voltage regulators and convertors |
469 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 470 | |
82b736df MB |
471 | config REGULATOR_LP3972 |
472 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
473 | depends on I2C | |
dfb9b8a4 | 474 | help |
82b736df MB |
475 | Say Y here to support the voltage regulators and convertors |
476 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 477 | |
82b736df | 478 | config REGULATOR_LP872X |
631a1fc4 | 479 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 480 | depends on I2C |
82b736df MB |
481 | select REGMAP_I2C |
482 | help | |
483 | This driver supports LP8720/LP8725 PMIC | |
484 | ||
994aae32 K |
485 | config REGULATOR_LP873X |
486 | tristate "TI LP873X Power regulators" | |
f618ed21 | 487 | depends on MFD_TI_LP873X && OF |
994aae32 K |
488 | help |
489 | This driver supports LP873X voltage regulator chips. LP873X | |
490 | provides two step-down converters and two general-purpose LDO | |
491 | voltage regulators. It supports software based voltage control | |
492 | for different voltage domains | |
493 | ||
82b736df MB |
494 | config REGULATOR_LP8755 |
495 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 496 | depends on I2C |
82b736df | 497 | select REGMAP_I2C |
dfb9b8a4 | 498 | help |
82b736df MB |
499 | This driver supports LP8755 High Performance PMU driver. This |
500 | chip contains six step-down DC/DC converters which can support | |
501 | 9 mode multiphase configuration. | |
dfb9b8a4 | 502 | |
f0168a9b K |
503 | config REGULATOR_LP87565 |
504 | tristate "TI LP87565 Power regulators" | |
505 | depends on MFD_TI_LP87565 && OF | |
506 | help | |
507 | This driver supports LP87565 voltage regulator chips. LP87565 | |
508 | provides four step-down converters. It supports software based | |
509 | voltage control for different voltage domains | |
510 | ||
82b736df | 511 | config REGULATOR_LP8788 |
631a1fc4 | 512 | tristate "TI LP8788 Power Regulators" |
82b736df | 513 | depends on MFD_LP8788 |
dfb9b8a4 | 514 | help |
82b736df | 515 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 516 | |
3eb2c7ec | 517 | config REGULATOR_LTC3589 |
ac1d6868 AL |
518 | tristate "LTC3589 8-output voltage regulator" |
519 | depends on I2C | |
520 | select REGMAP_I2C | |
3eb2c7ec PZ |
521 | help |
522 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
523 | 8-output regulators controlled via I2C. | |
524 | ||
37b918a0 TH |
525 | config REGULATOR_LTC3676 |
526 | tristate "LTC3676 8-output voltage regulator" | |
527 | depends on I2C | |
528 | select REGMAP_I2C | |
529 | help | |
530 | This enables support for the LTC3676 | |
531 | 8-output regulators controlled via I2C. | |
532 | ||
b0902bbe | 533 | config REGULATOR_MAX14577 |
8a82b408 | 534 | tristate "Maxim 14577/77836 regulator" |
b0902bbe KK |
535 | depends on MFD_MAX14577 |
536 | help | |
8a82b408 KK |
537 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
538 | The MAX14577 regulators include safeout LDO and charger current | |
539 | regulator. The MAX77836 has two additional LDOs. | |
b0902bbe | 540 | |
55f4fa4e RJ |
541 | config REGULATOR_MAX1586 |
542 | tristate "Maxim 1586/1587 voltage regulator" | |
543 | depends on I2C | |
55f4fa4e RJ |
544 | help |
545 | This driver controls a Maxim 1586 or 1587 voltage output | |
546 | regulator via I2C bus. The provided regulator is suitable | |
547 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
548 | ||
5b1c2028 LD |
549 | config REGULATOR_MAX77620 |
550 | tristate "Maxim 77620/MAX20024 voltage regulator" | |
0c7d1b4d | 551 | depends on MFD_MAX77620 || COMPILE_TEST |
5b1c2028 LD |
552 | help |
553 | This driver controls Maxim MAX77620 voltage output regulator | |
554 | via I2C bus. The provided regulator is suitable for Tegra | |
555 | chip to control Step-Down DC-DC and LDOs. Say Y here to | |
556 | enable the regulator driver. | |
557 | ||
bcc61f1c BG |
558 | config REGULATOR_MAX77650 |
559 | tristate "Maxim MAX77650/77651 regulator support" | |
0c7d1b4d | 560 | depends on MFD_MAX77650 || COMPILE_TEST |
bcc61f1c BG |
561 | help |
562 | Regulator driver for MAX77650/77651 PMIC from Maxim | |
563 | Semiconductor. This device has a SIMO with three independent | |
564 | power rails and an LDO. | |
565 | ||
a71b797f HZ |
566 | config REGULATOR_MAX8649 |
567 | tristate "Maxim 8649 voltage regulator" | |
568 | depends on I2C | |
c5b68d47 | 569 | select REGMAP_I2C |
a71b797f HZ |
570 | help |
571 | This driver controls a Maxim 8649 voltage output regulator via | |
572 | I2C bus. | |
573 | ||
27f37e4b WS |
574 | config REGULATOR_MAX8660 |
575 | tristate "Maxim 8660/8661 voltage regulator" | |
576 | depends on I2C | |
577 | help | |
578 | This driver controls a Maxim 8660/8661 voltage output | |
579 | regulator via I2C bus. | |
580 | ||
d83f778c SL |
581 | config REGULATOR_MAX8893 |
582 | tristate "Maxim 8893 voltage regulator" | |
583 | depends on I2C | |
1aeb1a72 | 584 | select REGMAP_I2C |
d83f778c SL |
585 | help |
586 | This driver controls a Maxim 8893 voltage output | |
587 | regulator via I2C bus. | |
588 | ||
ffee1909 GY |
589 | config REGULATOR_MAX8907 |
590 | tristate "Maxim 8907 voltage regulator" | |
0c7d1b4d | 591 | depends on MFD_MAX8907 || COMPILE_TEST |
ffee1909 GY |
592 | help |
593 | This driver controls a Maxim 8907 voltage output regulator | |
594 | via I2C bus. The provided regulator is suitable for Tegra | |
595 | chip to control Step-Down DC-DC and LDOs. | |
596 | ||
08ff6f2a HZ |
597 | config REGULATOR_MAX8925 |
598 | tristate "Maxim MAX8925 Power Management IC" | |
599 | depends on MFD_MAX8925 | |
600 | help | |
48f1b4ef | 601 | Say y here to support the voltage regulator of Maxim MAX8925 PMIC. |
08ff6f2a | 602 | |
202f4f53 MH |
603 | config REGULATOR_MAX8952 |
604 | tristate "Maxim MAX8952 Power Management IC" | |
605 | depends on I2C | |
606 | help | |
607 | This driver controls a Maxim 8952 voltage output regulator | |
608 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
609 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
610 | ||
5928f538 LD |
611 | config REGULATOR_MAX8973 |
612 | tristate "Maxim MAX8973 voltage regulator " | |
613 | depends on I2C | |
d2d5437b | 614 | depends on THERMAL && THERMAL_OF |
5928f538 LD |
615 | select REGMAP_I2C |
616 | help | |
617 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
48f1b4ef | 618 | switching regulator delivers up to 9A of output current. Each |
5928f538 LD |
619 | phase operates at a 2MHz fixed frequency with a 120 deg shift |
620 | from the adjacent phase, allowing the use of small magnetic component. | |
621 | ||
bd6ca2cf MH |
622 | config REGULATOR_MAX8997 |
623 | tristate "Maxim 8997/8966 regulator" | |
624 | depends on MFD_MAX8997 | |
625 | help | |
626 | This driver controls a Maxim 8997/8966 regulator | |
627 | via I2C bus. The provided regulator is suitable for S5PC110, | |
628 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
629 | VCC_USIM voltages. | |
630 | ||
156f2528 KP |
631 | config REGULATOR_MAX8998 |
632 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 633 | depends on MFD_MAX8998 |
156f2528 KP |
634 | help |
635 | This driver controls a Maxim 8998 voltage output regulator | |
636 | via I2C bus. The provided regulator is suitable for S3C6410 | |
637 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
638 | ||
133d4016 JL |
639 | config REGULATOR_MAX77686 |
640 | tristate "Maxim 77686 regulator" | |
0c7d1b4d | 641 | depends on MFD_MAX77686 || COMPILE_TEST |
133d4016 JL |
642 | help |
643 | This driver controls a Maxim 77686 regulator | |
644 | via I2C bus. The provided regulator is suitable for | |
645 | Exynos-4 chips to control VARM and VINT voltages. | |
646 | ||
80b022e2 | 647 | config REGULATOR_MAX77693 |
9e9a08e8 | 648 | tristate "Maxim 77693/77843 regulator" |
0c7d1b4d | 649 | depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST |
80b022e2 | 650 | help |
9e9a08e8 | 651 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
80b022e2 JL |
652 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
653 | and one current regulator 'CHARGER'. This is suitable for | |
9e9a08e8 | 654 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
80b022e2 | 655 | |
e6f2f805 JMC |
656 | config REGULATOR_MAX77802 |
657 | tristate "Maxim 77802 regulator" | |
0c7d1b4d | 658 | depends on MFD_MAX77686 || COMPILE_TEST |
e6f2f805 JMC |
659 | help |
660 | This driver controls a Maxim 77802 regulator | |
661 | via I2C bus. The provided regulator is suitable for | |
662 | Exynos5420/Exynos5800 SoCs to control various voltages. | |
663 | It includes support for control of voltage and ramp speed. | |
664 | ||
e7314653 IC |
665 | config REGULATOR_MAX77826 |
666 | tristate "Maxim 77826 regulator" | |
667 | depends on I2C | |
668 | select REGMAP_I2C | |
669 | help | |
670 | This driver controls a Maxim 77826 regulator via I2C bus. | |
671 | The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. | |
672 | It includes support for control of output voltage. This | |
673 | regulator is found on the Samsung Galaxy S5 (klte) smartphone. | |
674 | ||
82b736df MB |
675 | config REGULATOR_MC13XXX_CORE |
676 | tristate | |
5ec271e7 | 677 | |
82b736df MB |
678 | config REGULATOR_MC13783 |
679 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 680 | depends on MFD_MC13XXX |
82b736df | 681 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 682 | help |
82b736df MB |
683 | Say y here to support the regulators found on the Freescale MC13783 |
684 | PMIC. | |
0cbdf7bc | 685 | |
82b736df MB |
686 | config REGULATOR_MC13892 |
687 | tristate "Freescale MC13892 regulator driver" | |
688 | depends on MFD_MC13XXX | |
689 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 690 | help |
82b736df MB |
691 | Say y here to support the regulators found on the Freescale MC13892 |
692 | PMIC. | |
5976f095 | 693 | |
919261c0 AS |
694 | config REGULATOR_MCP16502 |
695 | tristate "Microchip MCP16502 PMIC" | |
696 | depends on I2C && OF | |
77ea9060 | 697 | select REGMAP_I2C |
919261c0 AS |
698 | help |
699 | Say y here to support the MCP16502 PMIC. This driver supports | |
700 | basic operations (get/set voltage, get/set operating mode) | |
701 | through the regulator interface. In addition it enables | |
702 | suspend-to-ram/standby transition. | |
703 | ||
a273188b SS |
704 | config REGULATOR_MP5416 |
705 | tristate "Monolithic MP5416 PMIC" | |
706 | depends on I2C && OF | |
707 | select REGMAP_I2C | |
708 | help | |
709 | Say y here to support the MP5416 PMIC. This will enable supports | |
710 | the software controllable 4 buck and 4 LDO regulators. | |
711 | Say M here if you want to include support for the regulator as a | |
712 | module. | |
713 | ||
c66f1cba MR |
714 | config REGULATOR_MP8859 |
715 | tristate "MPS MP8859 regulator driver" | |
716 | depends on I2C | |
717 | select REGMAP_I2C | |
718 | help | |
719 | Say y here to support the MP8859 voltage regulator. This driver | |
720 | supports basic operations (get/set voltage) through the regulator | |
721 | interface. | |
722 | Say M here if you want to include support for the regulator as a | |
723 | module. The module will be named "mp8859". | |
724 | ||
97be8288 JZ |
725 | config REGULATOR_MP886X |
726 | tristate "MPS MP8869 regulator driver" | |
727 | depends on I2C && (OF || COMPILE_TEST) | |
728 | select REGMAP_I2C | |
729 | help | |
730 | This driver supports the MP8869 voltage regulator. | |
731 | ||
6501c1f5 SS |
732 | config REGULATOR_MPQ7920 |
733 | tristate "Monolithic MPQ7920 PMIC" | |
734 | depends on I2C && OF | |
735 | select REGMAP_I2C | |
736 | help | |
737 | Say y here to support the MPQ7920 PMIC. This will enable supports | |
738 | the software controllable 4 buck and 5 LDO regulators. | |
739 | This driver supports the control of different power rails of device | |
740 | through regulator interface. | |
741 | ||
8766018b HC |
742 | config REGULATOR_MT6311 |
743 | tristate "MediaTek MT6311 PMIC" | |
744 | depends on I2C | |
aab3c3f3 | 745 | select REGMAP_I2C |
8766018b HC |
746 | help |
747 | Say y here to select this option to enable the power regulator of | |
748 | MediaTek MT6311 PMIC. | |
749 | This driver supports the control of different power rails of device | |
750 | through regulator interface. | |
751 | ||
7aa382cf HHW |
752 | config REGULATOR_MT6315 |
753 | tristate "MediaTek MT6315 PMIC" | |
754 | depends on SPMI | |
755 | select REGMAP_SPMI | |
756 | help | |
757 | Say y here to select this option to enable the power regulator of | |
758 | MediaTek MT6315 PMIC. | |
759 | This driver supports the control of different power rails of device | |
760 | through regulator interface. | |
761 | ||
2fdf8292 CZ |
762 | config REGULATOR_MT6323 |
763 | tristate "MediaTek MT6323 PMIC" | |
764 | depends on MFD_MT6397 | |
765 | help | |
766 | Say y here to select this option to enable the power regulator of | |
767 | MediaTek MT6323 PMIC. | |
768 | This driver supports the control of different power rails of device | |
a551e273 CX |
769 | through regulator interface. |
770 | ||
f67ff1bd HHW |
771 | config REGULATOR_MT6358 |
772 | tristate "MediaTek MT6358 PMIC" | |
1b3bcca2 | 773 | depends on MFD_MT6397 |
f67ff1bd HHW |
774 | help |
775 | Say y here to select this option to enable the power regulator of | |
776 | MediaTek MT6358 PMIC. | |
777 | This driver supports the control of different power rails of device | |
778 | through regulator interface. | |
779 | ||
d7a58dec WS |
780 | config REGULATOR_MT6359 |
781 | tristate "MediaTek MT6359 PMIC" | |
782 | depends on MFD_MT6397 | |
783 | help | |
784 | Say y here to select this option to enable the power regulator of | |
785 | MediaTek MT6359 PMIC. | |
786 | This driver supports the control of different power rails of device | |
787 | through regulator interface. | |
f67ff1bd | 788 | |
d321571d GC |
789 | config REGULATOR_MT6360 |
790 | tristate "MT6360 SubPMIC Regulator" | |
791 | depends on MFD_MT6360 | |
792 | help | |
793 | Say Y here to enable MT6360 regulator support. | |
794 | This is support MT6360 PMIC/LDO part include | |
795 | 2-channel buck with Thermal Shutdown and Overload Protection | |
796 | 6-channel High PSRR and Low Dropout LDO. | |
797 | ||
a551e273 CX |
798 | config REGULATOR_MT6380 |
799 | tristate "MediaTek MT6380 PMIC" | |
800 | depends on MTK_PMIC_WRAP | |
801 | help | |
802 | Say y here to select this option to enable the power regulator of | |
803 | MediaTek MT6380 PMIC. | |
804 | This driver supports the control of different power rails of device | |
2fdf8292 CZ |
805 | through regulator interface. |
806 | ||
0425e242 FF |
807 | config REGULATOR_MT6397 |
808 | tristate "MediaTek MT6397 PMIC" | |
809 | depends on MFD_MT6397 | |
810 | help | |
811 | Say y here to select this option to enable the power regulator of | |
812 | MediaTek MT6397 PMIC. | |
813 | This driver supports the control of different power rails of device | |
814 | through regulator interface. | |
815 | ||
a0db6b0a | 816 | config REGULATOR_MTK_DVFSRC |
817 | tristate "MediaTek DVFSRC regulator driver" | |
818 | depends on MTK_DVFSRC | |
819 | help | |
820 | Say y here to control regulator by DVFSRC (dynamic voltage | |
821 | and frequency scaling resource collector). | |
822 | This driver supports to control regulators via the DVFSRC | |
823 | of Mediatek. It allows for voting on regulator state | |
824 | between multiple users. | |
825 | ||
82b736df MB |
826 | config REGULATOR_PALMAS |
827 | tristate "TI Palmas PMIC Regulators" | |
828 | depends on MFD_PALMAS | |
af8b5fc3 | 829 | help |
82b736df MB |
830 | If you wish to control the regulators on the Palmas series of |
831 | chips say Y here. This will enable support for all the software | |
832 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 833 | |
82b736df MB |
834 | The regulators available on Palmas series chips vary depending |
835 | on the muxing. This is handled automatically in the driver by | |
836 | reading the mux info from OTP. | |
b59320cc | 837 | |
11469e0b B |
838 | config REGULATOR_PBIAS |
839 | tristate "PBIAS OMAP regulator driver" | |
840 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
841 | help | |
842 | Say y here to support pbias regulator for mmc1:SD card i/o | |
843 | on OMAP SoCs. | |
844 | This driver provides support for OMAP pbias modelled | |
845 | regulators. | |
846 | ||
0935ff5f RG |
847 | config REGULATOR_PCA9450 |
848 | tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" | |
849 | depends on I2C | |
850 | select REGMAP_I2C | |
851 | help | |
852 | Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC | |
853 | regulator driver. | |
854 | ||
82b736df MB |
855 | config REGULATOR_PCAP |
856 | tristate "Motorola PCAP2 regulator driver" | |
857 | depends on EZX_PCAP | |
ade7515f | 858 | help |
82b736df MB |
859 | This driver provides support for the voltage regulators of the |
860 | PCAP2 PMIC. | |
ade7515f | 861 | |
dfb9b8a4 AL |
862 | config REGULATOR_PCF50633 |
863 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 864 | depends on MFD_PCF50633 |
295c08bc | 865 | help |
48f1b4ef | 866 | Say Y here to support the voltage regulators and converters |
dfb9b8a4 | 867 | on PCF50633 |
295c08bc | 868 | |
d3795d63 JT |
869 | config REGULATOR_PF8X00 |
870 | tristate "NXP PF8100/PF8121A/PF8200 regulator driver" | |
871 | depends on I2C && OF | |
872 | select REGMAP_I2C | |
873 | help | |
874 | Say y here to support the regulators found on the NXP | |
875 | PF8100/PF8121A/PF8200 PMIC. | |
876 | ||
4d23b84d AG |
877 | Say M here if you want to support for the regulators found |
878 | on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named | |
879 | "pf8x00-regulator". | |
880 | ||
3784b6d6 | 881 | config REGULATOR_PFUZE100 |
297101ab | 882 | tristate "Freescale PFUZE100/200/3000/3001 regulator driver" |
6a6939d5 | 883 | depends on I2C && OF |
94421b05 | 884 | select REGMAP_I2C |
3784b6d6 | 885 | help |
2cee2121 | 886 | Say y here to support the regulators found on the Freescale |
297101ab | 887 | PFUZE100/200/3000/3001 PMIC. |
3784b6d6 | 888 | |
f307a7e9 JB |
889 | config REGULATOR_PV88060 |
890 | tristate "Powerventure Semiconductor PV88060 regulator" | |
891 | depends on I2C | |
892 | select REGMAP_I2C | |
893 | help | |
894 | Say y here to support the voltage regulators and convertors | |
895 | PV88060 | |
896 | ||
99cf3af5 JB |
897 | config REGULATOR_PV88080 |
898 | tristate "Powerventure Semiconductor PV88080 regulator" | |
899 | depends on I2C | |
900 | select REGMAP_I2C | |
901 | help | |
902 | Say y here to support the buck convertors on PV88080 | |
903 | ||
c90456e3 JB |
904 | config REGULATOR_PV88090 |
905 | tristate "Powerventure Semiconductor PV88090 regulator" | |
906 | depends on I2C | |
907 | select REGMAP_I2C | |
908 | help | |
909 | Say y here to support the voltage regulators and convertors | |
910 | on PV88090 | |
911 | ||
aa66cc66 CZ |
912 | config REGULATOR_PWM |
913 | tristate "PWM voltage regulator" | |
914 | depends on PWM | |
915 | help | |
916 | This driver supports PWM controlled voltage regulators. PWM | |
917 | duty cycle can increase or decrease the voltage. | |
918 | ||
2720386e BA |
919 | config REGULATOR_QCOM_RPM |
920 | tristate "Qualcomm RPM regulator driver" | |
921 | depends on MFD_QCOM_RPM | |
922 | help | |
923 | If you say yes to this option, support will be included for the | |
924 | regulators exposed by the Resource Power Manager found in Qualcomm | |
925 | 8660, 8960 and 8064 based devices. | |
926 | ||
927 | Say M here if you want to include support for the regulators on the | |
928 | Qualcomm RPM as a module. The module will be named | |
929 | "qcom_rpm-regulator". | |
930 | ||
46fc033e DC |
931 | config REGULATOR_QCOM_RPMH |
932 | tristate "Qualcomm Technologies, Inc. RPMh regulator driver" | |
34c5aa26 | 933 | depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) |
d957d161 | 934 | depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) |
46fc033e DC |
935 | help |
936 | This driver supports control of PMIC regulators via the RPMh hardware | |
937 | block found on Qualcomm Technologies Inc. SoCs. RPMh regulator | |
938 | control allows for voting on regulator state between multiple | |
939 | processors within the SoC. | |
940 | ||
da65e367 BA |
941 | config REGULATOR_QCOM_SMD_RPM |
942 | tristate "Qualcomm SMD based RPM regulator driver" | |
943 | depends on QCOM_SMD_RPM | |
944 | help | |
945 | If you say yes to this option, support will be included for the | |
946 | regulators exposed by the Resource Power Manager found in Qualcomm | |
947 | 8974 based devices. | |
948 | ||
949 | Say M here if you want to include support for the regulators on the | |
950 | Qualcomm RPM as a module. The module will be named | |
951 | "qcom_smd-regulator". | |
952 | ||
e92a4047 SB |
953 | config REGULATOR_QCOM_SPMI |
954 | tristate "Qualcomm SPMI regulator driver" | |
955 | depends on SPMI || COMPILE_TEST | |
956 | help | |
957 | If you say yes to this option, support will be included for the | |
958 | regulators found in Qualcomm SPMI PMICs. | |
959 | ||
960 | Say M here if you want to include support for the regulators on the | |
961 | Qualcomm SPMI PMICs as a module. The module will be named | |
962 | "qcom_spmi-regulator". | |
963 | ||
4fe66d5a WC |
964 | config REGULATOR_QCOM_USB_VBUS |
965 | tristate "Qualcomm USB Vbus regulator driver" | |
966 | depends on SPMI || COMPILE_TEST | |
967 | help | |
968 | If you say yes to this option, support will be included for the | |
969 | regulator used to enable the VBUS output. | |
970 | ||
971 | Say M here if you want to include support for enabling the VBUS output | |
972 | as a module. The module will be named "qcom_usb_vbus_regulator". | |
973 | ||
38573472 MV |
974 | config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY |
975 | tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" | |
976 | depends on BACKLIGHT_CLASS_DEVICE | |
977 | depends on I2C | |
978 | select REGMAP_I2C | |
979 | help | |
980 | This driver supports ATTINY regulator on the Raspberry Pi 7-inch | |
981 | touchscreen unit. The regulator is used to enable power to the | |
982 | TC358762, display and to control backlight. | |
983 | ||
6ffc3270 LD |
984 | config REGULATOR_RC5T583 |
985 | tristate "RICOH RC5T583 Power regulators" | |
986 | depends on MFD_RC5T583 | |
987 | help | |
988 | Select this option to enable the power regulator of RICOH | |
989 | PMIC RC5T583. | |
990 | This driver supports the control of different power rails of device | |
991 | through regulator interface. The device supports multiple DCDC/LDO | |
992 | outputs which can be controlled by i2c communication. | |
993 | ||
2cd64ae3 | 994 | config REGULATOR_RK808 |
e444f6d6 | 995 | tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" |
2cd64ae3 CZ |
996 | depends on MFD_RK808 |
997 | help | |
998 | Select this option to enable the power regulator of ROCKCHIP | |
e444f6d6 | 999 | PMIC RK805,RK809&RK817,RK808 and RK818. |
2cd64ae3 CZ |
1000 | This driver supports the control of different power rails of device |
1001 | through regulator interface. The device supports multiple DCDC/LDO | |
1002 | outputs which can be controlled by i2c communication. | |
1003 | ||
811b7006 | 1004 | config REGULATOR_RN5T618 |
ed6d362d | 1005 | tristate "Ricoh RN5T567/618 voltage regulators" |
811b7006 BG |
1006 | depends on MFD_RN5T618 |
1007 | help | |
83b2a3c2 PHH |
1008 | Say y here to support the regulators found on Ricoh RN5T567, |
1009 | RN5T618 or RC5T619 PMIC. | |
811b7006 | 1010 | |
21b72156 MV |
1011 | config REGULATOR_ROHM |
1012 | tristate | |
1013 | ||
5bbbfc7f CH |
1014 | config REGULATOR_RT4801 |
1015 | tristate "Richtek RT4801 Regulators" | |
1016 | depends on I2C | |
02532cb8 | 1017 | select REGMAP_I2C |
5bbbfc7f CH |
1018 | help |
1019 | This adds support for voltage regulators in Richtek RT4801 Display Bias IC. | |
1020 | The device supports two regulators (DSVP/DSVN). | |
1021 | ||
9351ab8b CH |
1022 | config REGULATOR_RT4831 |
1023 | tristate "Richtek RT4831 DSV Regulators" | |
1024 | depends on MFD_RT4831 | |
1025 | help | |
1026 | This adds support for voltage regulators in Richtek RT4831. | |
1027 | There are three regulators (VLCM/DSVP/DSVN). | |
1028 | VLCM is a virtual voltage input for DSVP/DSVN inside IC. | |
1029 | And DSVP/DSVN is the real Vout range from 4V to 6.5V. | |
1030 | It's common used to provide the power for the display panel. | |
1031 | ||
b1917578 BS |
1032 | config REGULATOR_RT5033 |
1033 | tristate "Richtek RT5033 Regulators" | |
1034 | depends on MFD_RT5033 | |
1035 | help | |
1036 | This adds support for voltage and current regulators in Richtek | |
1037 | RT5033 PMIC. The device supports multiple regulators like | |
1038 | current source, LDO and Buck. | |
1039 | ||
de20b747 CH |
1040 | config REGULATOR_RT6160 |
1041 | tristate "Richtek RT6160 BuckBoost voltage regulator" | |
1042 | depends on I2C | |
1043 | select REGMAP_I2C | |
1044 | help | |
1045 | This adds support for voltage regulator in Richtek RT6160. | |
1046 | This device automatically change voltage output mode from | |
1047 | Buck or Boost. The mode transistion depend on the input source voltage. | |
1048 | The wide output range is from 2025mV to 5200mV and can be used on most | |
1049 | common application scenario. | |
1050 | ||
a747070e CH |
1051 | config REGULATOR_RT6245 |
1052 | tristate "Richtek RT6245 voltage regulator" | |
1053 | depends on I2C | |
1054 | select REGMAP_I2C | |
1055 | help | |
1056 | This adds supprot for Richtek RT6245 voltage regulator. | |
1057 | It can support up to 14A output current and adjustable output voltage | |
1058 | from 0.4375V to 1.3875V, per step 12.5mV. | |
1059 | ||
b8c054a5 | 1060 | config REGULATOR_RTMV20 |
5f01de6f | 1061 | tristate "Richtek RTMV20 Laser Diode Regulator" |
b8c054a5 CH |
1062 | depends on I2C |
1063 | select REGMAP_I2C | |
1064 | help | |
1065 | This driver adds support for the load switch current regulator on | |
1066 | the Richtek RTMV20. It can support the load current up to 6A and | |
1067 | integrate strobe/vsync/fsin signal to synchronize the IR camera. | |
1068 | ||
f1879271 SK |
1069 | config REGULATOR_S2MPA01 |
1070 | tristate "Samsung S2MPA01 voltage regulator" | |
0c7d1b4d | 1071 | depends on MFD_SEC_CORE || COMPILE_TEST |
f1879271 SK |
1072 | help |
1073 | This driver controls Samsung S2MPA01 voltage output regulator | |
1074 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
1075 | ||
cb74685e | 1076 | config REGULATOR_S2MPS11 |
51af2067 | 1077 | tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" |
0c7d1b4d | 1078 | depends on MFD_SEC_CORE || COMPILE_TEST |
cb74685e | 1079 | help |
51af2067 | 1080 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage |
76b9840b CC |
1081 | output regulator via I2C bus. The chip is comprised of high efficient |
1082 | Buck converters including Dual-Phase Buck converter, Buck-Boost | |
1083 | converter, various LDOs. | |
cb74685e | 1084 | |
dfb9b8a4 AL |
1085 | config REGULATOR_S5M8767 |
1086 | tristate "Samsung S5M8767A voltage regulator" | |
0c7d1b4d | 1087 | depends on MFD_SEC_CORE || COMPILE_TEST |
5e428d5c | 1088 | help |
dfb9b8a4 AL |
1089 | This driver supports a Samsung S5M8767A voltage output regulator |
1090 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
1091 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 1092 | |
433c9bb7 EC |
1093 | config REGULATOR_SC2731 |
1094 | tristate "Spreadtrum SC2731 power regulator driver" | |
1095 | depends on MFD_SC27XX_PMIC || COMPILE_TEST | |
1096 | help | |
1097 | This driver provides support for the voltage regulators on the | |
1098 | SC2731 PMIC. | |
1099 | ||
9839d627 GY |
1100 | config REGULATOR_SKY81452 |
1101 | tristate "Skyworks Solutions SKY81452 voltage regulator" | |
70b5b27c | 1102 | depends on MFD_SKY81452 |
4a5d3013 | 1103 | help |
9839d627 GY |
1104 | This driver supports Skyworks SKY81452 voltage output regulator |
1105 | via I2C bus. SKY81452 has one voltage linear regulator can be | |
1106 | programmed from 4.5V to 20V. | |
1107 | ||
1108 | This driver can also be built as a module. If so, the module | |
1109 | will be called sky81452-regulator. | |
4a5d3013 | 1110 | |
a867bde3 | 1111 | config REGULATOR_SLG51000 |
76bec25b KK |
1112 | tristate "Dialog Semiconductor SLG51000 regulators" |
1113 | depends on I2C | |
1114 | select REGMAP_I2C | |
1115 | help | |
a867bde3 EJ |
1116 | Say y here to support for the Dialog Semiconductor SLG51000. |
1117 | The SLG51000 is seven compact and customizable low dropout | |
1118 | regulators. | |
1119 | ||
4e210fbe FG |
1120 | config REGULATOR_STM32_BOOSTER |
1121 | tristate "STMicroelectronics STM32 BOOSTER" | |
1122 | depends on ARCH_STM32 || COMPILE_TEST | |
1123 | help | |
1124 | This driver supports internal booster (3V3) embedded in some | |
1125 | STMicroelectronics STM32 chips. It can be used to supply ADC analog | |
1126 | input switches when vdda supply is below 2.7V. | |
1127 | ||
1128 | This driver can also be built as a module. If so, the module | |
1129 | will be called stm32-booster. | |
1130 | ||
0cdbf481 FG |
1131 | config REGULATOR_STM32_VREFBUF |
1132 | tristate "STMicroelectronics STM32 VREFBUF" | |
1133 | depends on ARCH_STM32 || COMPILE_TEST | |
1134 | help | |
1135 | This driver supports STMicroelectronics STM32 VREFBUF (voltage | |
1136 | reference buffer) which can be used as voltage reference for | |
1137 | internal ADCs, DACs and also for external components through | |
1138 | dedicated Vref+ pin. | |
1139 | ||
1140 | This driver can also be built as a module. If so, the module | |
1141 | will be called stm32-vrefbuf. | |
1142 | ||
6cdae817 PPL |
1143 | config REGULATOR_STM32_PWR |
1144 | bool "STMicroelectronics STM32 PWR" | |
1145 | depends on ARCH_STM32 || COMPILE_TEST | |
1146 | help | |
1147 | This driver supports internal regulators (1V1, 1V8, 3V3) in the | |
1148 | STMicroelectronics STM32 chips. | |
1149 | ||
ca55b718 | 1150 | config REGULATOR_STPMIC1 |
1151 | tristate "STMicroelectronics STPMIC1 PMIC Regulators" | |
1152 | depends on MFD_STPMIC1 | |
1153 | help | |
1154 | This driver supports STMicroelectronics STPMIC1 PMIC voltage | |
1155 | regulators and switches. The STPMIC1 regulators supply power to | |
1156 | an application processor as well as to external system | |
1157 | peripherals such as DDR, Flash memories and system devices. | |
1158 | ||
1159 | To compile this driver as a module, choose M here: the | |
1160 | module will be called stpmic1_regulator. | |
1161 | ||
82b736df | 1162 | config REGULATOR_TI_ABB |
631a1fc4 | 1163 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 1164 | depends on ARCH_OMAP |
4c5dabce | 1165 | help |
82b736df MB |
1166 | Select this option to support Texas Instruments' on-chip Adaptive Body |
1167 | Bias (ABB) LDO regulators. It is recommended that this option be | |
1168 | enabled on required TI SoC. Certain Operating Performance Points | |
1169 | on TI SoCs may be unstable without enabling this as it provides | |
1170 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 1171 | |
3615a34e LW |
1172 | config REGULATOR_STW481X_VMMC |
1173 | bool "ST Microelectronics STW481X VMMC regulator" | |
4049dc1a | 1174 | depends on MFD_STW481X || COMPILE_TEST |
3615a34e LW |
1175 | default y if MFD_STW481X |
1176 | help | |
1177 | This driver supports the internal VMMC regulator in the STw481x | |
1178 | PMIC chips. | |
1179 | ||
8c485bed AF |
1180 | config REGULATOR_SY7636A |
1181 | tristate "Silergy SY7636A voltage regulator" | |
1182 | depends on MFD_SY7636A | |
1183 | help | |
1184 | This driver supports Silergy SY3686A voltage regulator. | |
1185 | ||
8878302e OJ |
1186 | config REGULATOR_SY8106A |
1187 | tristate "Silergy SY8106A regulator" | |
1188 | depends on I2C && (OF || COMPILE_TEST) | |
1189 | select REGMAP_I2C | |
1190 | help | |
1191 | This driver supports SY8106A single output regulator. | |
1192 | ||
d5a2b822 | 1193 | config REGULATOR_SY8824X |
67a7b05b | 1194 | tristate "Silergy SY8824C/SY8824E regulator" |
d5a2b822 JZ |
1195 | depends on I2C && (OF || COMPILE_TEST) |
1196 | select REGMAP_I2C | |
1197 | help | |
1198 | This driver supports SY8824C single output regulator. | |
1199 | ||
38fc6f29 JZ |
1200 | config REGULATOR_SY8827N |
1201 | tristate "Silergy SY8827N regulator" | |
1202 | depends on I2C && (OF || COMPILE_TEST) | |
1203 | select REGMAP_I2C | |
1204 | help | |
1205 | This driver supports SY8827N single output regulator. | |
1206 | ||
0c570674 LD |
1207 | config REGULATOR_TPS51632 |
1208 | tristate "TI TPS51632 Power Regulator" | |
1209 | depends on I2C | |
1210 | select REGMAP_I2C | |
1211 | help | |
1212 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 1213 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
1214 | with Serial VID control and DVFS. |
1215 | The voltage output can be configure through I2C interface or PWM | |
1216 | interface. | |
1217 | ||
2edd3b69 LW |
1218 | config REGULATOR_TPS6105X |
1219 | tristate "TI TPS6105X Power regulators" | |
1220 | depends on TPS6105X | |
1221 | default y if TPS6105X | |
1222 | help | |
1223 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
1224 | It is a single boost converter primarily for white LEDs and | |
1225 | audio amplifiers. | |
1226 | ||
dfb9b8a4 | 1227 | config REGULATOR_TPS62360 |
d1cf4f65 | 1228 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
1229 | depends on I2C |
1230 | select REGMAP_I2C | |
1231 | help | |
d1cf4f65 | 1232 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
1233 | regulator is meant for processor core supply. This chip is |
1234 | high-frequency synchronous step down dc-dc converter optimized | |
1235 | for battery-powered portable applications. | |
1236 | ||
2de79850 AA |
1237 | config REGULATOR_TPS65023 |
1238 | tristate "TI TPS65023 Power regulators" | |
1239 | depends on I2C | |
90923351 | 1240 | select REGMAP_I2C |
2de79850 AA |
1241 | help |
1242 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
1243 | three step-down converters and two general-purpose LDO voltage regulators. | |
1244 | It supports TI's software based Class-2 SmartReflex implementation. | |
1245 | ||
1246 | config REGULATOR_TPS6507X | |
1247 | tristate "TI TPS6507X Power regulators" | |
1248 | depends on I2C | |
1249 | help | |
1250 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
1251 | three step-down converters and two general-purpose LDO voltage regulators. | |
1252 | It supports TI's software based Class-2 SmartReflex implementation. | |
1253 | ||
d2a2e729 AD |
1254 | config REGULATOR_TPS65086 |
1255 | tristate "TI TPS65086 Power regulators" | |
1256 | depends on MFD_TPS65086 | |
1257 | help | |
1258 | This driver provides support for the voltage regulators on | |
1259 | TI TPS65086 PMICs. | |
1260 | ||
452534e5 VB |
1261 | config REGULATOR_TPS65090 |
1262 | tristate "TI TPS65090 Power regulator" | |
1263 | depends on MFD_TPS65090 | |
1264 | help | |
1265 | This driver provides support for the voltage regulators on the | |
1266 | TI TPS65090 PMIC. | |
1267 | ||
77c129bf VRT |
1268 | config REGULATOR_TPS65132 |
1269 | tristate "TI TPS65132 Dual Output Power regulators" | |
1270 | depends on I2C && GPIOLIB | |
1271 | select REGMAP_I2C | |
1272 | help | |
1273 | This driver supports TPS65132 single inductor - dual output | |
48f1b4ef | 1274 | power supply specifically designed for display panels. |
77c129bf | 1275 | |
a493077f AC |
1276 | config REGULATOR_TPS65217 |
1277 | tristate "TI TPS65217 Power regulators" | |
1278 | depends on MFD_TPS65217 | |
9260ad98 | 1279 | help |
a493077f AC |
1280 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
1281 | provides three step-down converters and four general-purpose LDO | |
1282 | voltage regulators. It supports software based voltage control | |
1283 | for different voltage domains | |
9260ad98 | 1284 | |
90e7d526 K |
1285 | config REGULATOR_TPS65218 |
1286 | tristate "TI TPS65218 Power regulators" | |
948838a1 | 1287 | depends on MFD_TPS65218 && OF |
90e7d526 K |
1288 | help |
1289 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
1290 | provides six step-down converters and one general-purpose LDO | |
1291 | voltage regulators. It supports software based voltage control | |
1292 | for different voltage domains | |
1293 | ||
1394fd28 CC |
1294 | config REGULATOR_TPS6524X |
1295 | tristate "TI TPS6524X Power regulators" | |
1296 | depends on SPI | |
be0e2d3e | 1297 | help |
1394fd28 CC |
1298 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
1299 | provides three step-down converters and two general-purpose LDO | |
1300 | voltage regulators. This device is interfaced using a customized | |
1301 | serial interface currently supported on the sequencer serial | |
1302 | port controller. | |
be0e2d3e | 1303 | |
dfb9b8a4 AL |
1304 | config REGULATOR_TPS6586X |
1305 | tristate "TI TPS6586X Power regulators" | |
1306 | depends on MFD_TPS6586X | |
51bd6943 | 1307 | help |
dfb9b8a4 | 1308 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 1309 | |
518fb721 | 1310 | config REGULATOR_TPS65910 |
ae0e6544 | 1311 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 1312 | depends on MFD_TPS65910 |
8b385d9b | 1313 | help |
ae0e6544 | 1314 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 1315 | |
dfb9b8a4 AL |
1316 | config REGULATOR_TPS65912 |
1317 | tristate "TI TPS65912 Power regulator" | |
33f9d8c0 | 1318 | depends on MFD_TPS65912 |
c789ca20 | 1319 | help |
dfb9b8a4 | 1320 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 1321 | |
1a0bb679 | 1322 | config REGULATOR_TPS80031 |
3b063496 | 1323 | tristate "TI TPS80031/TPS80032 power regulator driver" |
1a0bb679 LD |
1324 | depends on MFD_TPS80031 |
1325 | help | |
1326 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
1327 | Path and Battery Charger. It has 5 configurable step-down | |
1328 | converters, 11 general purpose LDOs, VBUS generator and digital | |
1329 | output to control regulators. | |
1330 | ||
dfb9b8a4 | 1331 | config REGULATOR_TWL4030 |
631a1fc4 | 1332 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 1333 | depends on TWL4030_CORE |
1032fbfd | 1334 | help |
dfb9b8a4 AL |
1335 | This driver supports the voltage regulators provided by |
1336 | this family of companion chips. | |
1032fbfd | 1337 | |
9df4f909 KH |
1338 | config REGULATOR_UNIPHIER |
1339 | tristate "UniPhier regulator driver" | |
1340 | depends on ARCH_UNIPHIER || COMPILE_TEST | |
a71bcdfe AL |
1341 | depends on OF |
1342 | select REGMAP_MMIO | |
9df4f909 KH |
1343 | default ARCH_UNIPHIER |
1344 | help | |
1345 | Support for regulators implemented on Socionext UniPhier SoCs. | |
1346 | ||
9dee7a72 MK |
1347 | config REGULATOR_VCTRL |
1348 | tristate "Voltage controlled regulators" | |
1349 | depends on OF | |
1350 | help | |
1351 | This driver provides support for voltage regulators whose output | |
1352 | voltage is controlled by the voltage of another regulator. | |
1353 | ||
31e54086 PM |
1354 | config REGULATOR_VEXPRESS |
1355 | tristate "Versatile Express regulators" | |
1356 | depends on VEXPRESS_CONFIG | |
1357 | help | |
1358 | This driver provides support for voltage regulators available | |
1359 | on the ARM Ltd's Versatile Express platform. | |
1360 | ||
ebf652b4 RM |
1361 | config REGULATOR_VQMMC_IPQ4019 |
1362 | tristate "IPQ4019 VQMMC SD LDO regulator support" | |
1363 | depends on ARCH_QCOM | |
1364 | help | |
1365 | This driver provides support for the VQMMC LDO I/0 | |
1366 | voltage regulator of the IPQ4019 SD/EMMC controller. | |
1367 | ||
dfb9b8a4 AL |
1368 | config REGULATOR_WM831X |
1369 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
1370 | depends on MFD_WM831X | |
49610235 | 1371 | help |
dfb9b8a4 AL |
1372 | Support the voltage and current regulators of the WM831x series |
1373 | of PMIC devices. | |
49610235 | 1374 | |
dfb9b8a4 AL |
1375 | config REGULATOR_WM8350 |
1376 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
1377 | depends on MFD_WM8350 | |
1394fd28 | 1378 | help |
dfb9b8a4 | 1379 | This driver provides support for the voltage and current regulators |
c6d678b6 | 1380 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 1381 | |
dfb9b8a4 AL |
1382 | config REGULATOR_WM8400 |
1383 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
1384 | depends on MFD_WM8400 | |
518fb721 | 1385 | help |
dfb9b8a4 AL |
1386 | This driver provides support for the voltage regulators of the |
1387 | WM8400 AudioPlus PMIC. | |
518fb721 | 1388 | |
dfb9b8a4 AL |
1389 | config REGULATOR_WM8994 |
1390 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
1391 | depends on MFD_WM8994 | |
f7eb6c5e | 1392 | help |
dfb9b8a4 AL |
1393 | This driver provides support for the voltage regulators on the |
1394 | WM8994 CODEC. | |
f7eb6c5e | 1395 | |
498ab2fd NK |
1396 | config REGULATOR_QCOM_LABIBB |
1397 | tristate "QCOM LAB/IBB regulator support" | |
1398 | depends on SPMI || COMPILE_TEST | |
1399 | help | |
1400 | This driver supports Qualcomm's LAB/IBB regulators present on the | |
1401 | Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI | |
1402 | based PMIC implementations. LAB can be used as positive | |
1403 | boost regulator and IBB can be used as a negative boost regulator | |
1404 | for LCD display panel. | |
1405 | ||
bbda14df | 1406 | endif |
295c08bc | 1407 |