]>
Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
34abbd68 MB |
31 | config REGULATOR_DUMMY |
32 | bool "Provide a dummy regulator if regulator lookups fail" | |
33 | help | |
34 | If this option is enabled then when a regulator lookup fails | |
35 | and the board has not specified that it has provided full | |
4f842f6b MB |
36 | constraints the regulator core will provide an always |
37 | enabled dummy regulator, allowing consumer drivers to continue. | |
34abbd68 MB |
38 | |
39 | A warning will be generated when this substitution is done. | |
40 | ||
ba7e4763 | 41 | config REGULATOR_FIXED_VOLTAGE |
a9cb63b2 | 42 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
43 | help |
44 | This driver provides support for fixed voltage regulators, | |
45 | useful for systems which use a combination of software | |
46 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
47 | |
48 | config REGULATOR_VIRTUAL_CONSUMER | |
49 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
50 | help |
51 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
52 | current regulator API which provides sysfs controls for |
53 | configuring the supplies requested. This is mainly useful | |
54 | for test purposes. | |
ba7e4763 | 55 | |
c6d678b6 | 56 | If unsure, say no. |
ba7e4763 | 57 | |
1d98cccf MR |
58 | config REGULATOR_USERSPACE_CONSUMER |
59 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
60 | help |
61 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 62 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
63 | control power supplies for such devices. |
64 | ||
c6d678b6 | 65 | If unsure, say no. |
1d98cccf | 66 | |
3f0292ae HS |
67 | config REGULATOR_GPIO |
68 | tristate "GPIO regulator support" | |
76ec9d18 | 69 | depends on GPIOLIB |
3f0292ae HS |
70 | help |
71 | This driver provides support for regulators that can be | |
72 | controlled via gpios. | |
73 | It is capable of supporting current and voltage regulators | |
74 | and the platform has to provide a mapping of GPIO-states | |
75 | to target volts/amps. | |
76 | ||
dfb9b8a4 AL |
77 | config REGULATOR_AD5398 |
78 | tristate "Analog Devices AD5398/AD5821 regulators" | |
79 | depends on I2C | |
0eb5d5ab | 80 | help |
dfb9b8a4 AL |
81 | This driver supports AD5398 and AD5821 current regulator chips. |
82 | If building into module, its name is ad5398.ko. | |
83 | ||
84 | config REGULATOR_AAT2870 | |
85 | tristate "AnalogicTech AAT2870 Regulators" | |
86 | depends on MFD_AAT2870_CORE | |
87 | help | |
88 | If you have a AnalogicTech AAT2870 say Y to enable the | |
89 | regulator driver. | |
90 | ||
b667a45d MB |
91 | config REGULATOR_ARIZONA |
92 | tristate "Wolfson Arizona class devices" | |
93 | depends on MFD_ARIZONA | |
e6ed9058 | 94 | depends on SND_SOC |
b667a45d MB |
95 | help |
96 | Support for the regulators found on Wolfson Arizona class | |
97 | devices. | |
98 | ||
dfb9b8a4 AL |
99 | config REGULATOR_DA903X |
100 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
101 | depends on PMIC_DA903X | |
102 | help | |
103 | Say y here to support the BUCKs and LDOs regulators found on | |
104 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
105 | ||
106 | config REGULATOR_DA9052 | |
107 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
108 | depends on PMIC_DA9052 | |
109 | help | |
110 | This driver supports the voltage regulators of DA9052-BC and | |
111 | DA9053-AA/Bx PMIC. | |
112 | ||
f6130be6 AJ |
113 | config REGULATOR_DA9055 |
114 | tristate "Dialog Semiconductor DA9055 regulators" | |
115 | depends on MFD_DA9055 | |
116 | help | |
117 | Say y here to support the BUCKs and LDOs regulators found on | |
118 | Dialog Semiconductor DA9055 PMIC. | |
119 | ||
120 | This driver can also be built as a module. If so, the module | |
121 | will be called da9055-regulator. | |
122 | ||
49d8c599 YZ |
123 | config REGULATOR_FAN53555 |
124 | tristate "Fairchild FAN53555 Regulator" | |
125 | depends on I2C | |
126 | select REGMAP_I2C | |
127 | help | |
128 | This driver supports Fairchild FAN53555 Digitally Programmable | |
129 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
130 | regulator that delivers a digitally programmable output from an | |
131 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
132 | programmed through an I2C interface. | |
133 | ||
e3e5aff7 YCLP |
134 | config REGULATOR_ANATOP |
135 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
baa64151 | 136 | depends on MFD_SYSCON |
e3e5aff7 YCLP |
137 | help |
138 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
139 | regulators. It is recommended that this option be | |
140 | enabled on i.MX6 platform. | |
141 | ||
dfb9b8a4 AL |
142 | config REGULATOR_MC13XXX_CORE |
143 | tristate | |
144 | ||
145 | config REGULATOR_MC13783 | |
146 | tristate "Freescale MC13783 regulator driver" | |
147 | depends on MFD_MC13783 | |
148 | select REGULATOR_MC13XXX_CORE | |
149 | help | |
150 | Say y here to support the regulators found on the Freescale MC13783 | |
151 | PMIC. | |
152 | ||
153 | config REGULATOR_MC13892 | |
154 | tristate "Freescale MC13892 regulator driver" | |
155 | depends on MFD_MC13XXX | |
156 | select REGULATOR_MC13XXX_CORE | |
157 | help | |
158 | Say y here to support the regulators found on the Freescale MC13892 | |
159 | PMIC. | |
160 | ||
161 | config REGULATOR_ISL6271A | |
162 | tristate "Intersil ISL6271A Power regulator" | |
163 | depends on I2C | |
164 | help | |
165 | This driver supports ISL6271A voltage regulator chip. | |
166 | ||
167 | config REGULATOR_88PM8607 | |
168 | bool "Marvell 88PM8607 Power regulators" | |
169 | depends on MFD_88PM860X=y | |
170 | help | |
171 | This driver supports 88PM8607 voltage regulator chips. | |
0eb5d5ab | 172 | |
55f4fa4e RJ |
173 | config REGULATOR_MAX1586 |
174 | tristate "Maxim 1586/1587 voltage regulator" | |
175 | depends on I2C | |
55f4fa4e RJ |
176 | help |
177 | This driver controls a Maxim 1586 or 1587 voltage output | |
178 | regulator via I2C bus. The provided regulator is suitable | |
179 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
180 | ||
a71b797f HZ |
181 | config REGULATOR_MAX8649 |
182 | tristate "Maxim 8649 voltage regulator" | |
183 | depends on I2C | |
c5b68d47 | 184 | select REGMAP_I2C |
a71b797f HZ |
185 | help |
186 | This driver controls a Maxim 8649 voltage output regulator via | |
187 | I2C bus. | |
188 | ||
27f37e4b WS |
189 | config REGULATOR_MAX8660 |
190 | tristate "Maxim 8660/8661 voltage regulator" | |
191 | depends on I2C | |
192 | help | |
193 | This driver controls a Maxim 8660/8661 voltage output | |
194 | regulator via I2C bus. | |
195 | ||
ffee1909 GY |
196 | config REGULATOR_MAX8907 |
197 | tristate "Maxim 8907 voltage regulator" | |
198 | depends on MFD_MAX8907 | |
199 | help | |
200 | This driver controls a Maxim 8907 voltage output regulator | |
201 | via I2C bus. The provided regulator is suitable for Tegra | |
202 | chip to control Step-Down DC-DC and LDOs. | |
203 | ||
08ff6f2a HZ |
204 | config REGULATOR_MAX8925 |
205 | tristate "Maxim MAX8925 Power Management IC" | |
206 | depends on MFD_MAX8925 | |
207 | help | |
208 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
209 | ||
202f4f53 MH |
210 | config REGULATOR_MAX8952 |
211 | tristate "Maxim MAX8952 Power Management IC" | |
212 | depends on I2C | |
213 | help | |
214 | This driver controls a Maxim 8952 voltage output regulator | |
215 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
216 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
217 | ||
5928f538 LD |
218 | config REGULATOR_MAX8973 |
219 | tristate "Maxim MAX8973 voltage regulator " | |
220 | depends on I2C | |
221 | select REGMAP_I2C | |
222 | help | |
223 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
224 | switching regulator delievers up to 9A of output current. Each | |
225 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
226 | from the adjacent phase, allowing the use of small magnetic component. | |
227 | ||
bd6ca2cf MH |
228 | config REGULATOR_MAX8997 |
229 | tristate "Maxim 8997/8966 regulator" | |
230 | depends on MFD_MAX8997 | |
231 | help | |
232 | This driver controls a Maxim 8997/8966 regulator | |
233 | via I2C bus. The provided regulator is suitable for S5PC110, | |
234 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
235 | VCC_USIM voltages. | |
236 | ||
156f2528 KP |
237 | config REGULATOR_MAX8998 |
238 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 239 | depends on MFD_MAX8998 |
156f2528 KP |
240 | help |
241 | This driver controls a Maxim 8998 voltage output regulator | |
242 | via I2C bus. The provided regulator is suitable for S3C6410 | |
243 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
244 | ||
133d4016 JL |
245 | config REGULATOR_MAX77686 |
246 | tristate "Maxim 77686 regulator" | |
247 | depends on MFD_MAX77686 | |
248 | help | |
249 | This driver controls a Maxim 77686 regulator | |
250 | via I2C bus. The provided regulator is suitable for | |
251 | Exynos-4 chips to control VARM and VINT voltages. | |
252 | ||
dfb9b8a4 AL |
253 | config REGULATOR_PCAP |
254 | tristate "Motorola PCAP2 regulator driver" | |
255 | depends on EZX_PCAP | |
5ec271e7 | 256 | help |
dfb9b8a4 AL |
257 | This driver provides support for the voltage regulators of the |
258 | PCAP2 PMIC. | |
5ec271e7 | 259 | |
0cbdf7bc MS |
260 | config REGULATOR_LP3971 |
261 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
262 | depends on I2C | |
263 | help | |
264 | Say Y here to support the voltage regulators and convertors | |
265 | on National Semiconductors LP3971 PMIC | |
266 | ||
5976f095 AL |
267 | config REGULATOR_LP3972 |
268 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
269 | depends on I2C | |
270 | help | |
271 | Say Y here to support the voltage regulators and convertors | |
272 | on National Semiconductors LP3972 PMIC | |
273 | ||
af8b5fc3 | 274 | config REGULATOR_LP872X |
809d310c | 275 | bool "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
dc2060cf | 276 | depends on I2C=y |
af8b5fc3 KM |
277 | select REGMAP_I2C |
278 | help | |
279 | This driver supports LP8720/LP8725 PMIC | |
280 | ||
b59320cc DJ |
281 | config REGULATOR_LP8755 |
282 | tristate "TI LP8755 High Performance PMU driver" | |
283 | depends on I2C | |
284 | select REGMAP_I2C | |
285 | help | |
286 | This driver supports LP8755 High Performance PMU driver. This | |
287 | chip contains six step-down DC/DC converters which can support | |
288 | 9 mode multiphase configuration. | |
289 | ||
ade7515f KM |
290 | config REGULATOR_LP8788 |
291 | bool "TI LP8788 Power Regulators" | |
292 | depends on MFD_LP8788 | |
293 | help | |
294 | This driver supports LP8788 voltage regulator chip. | |
295 | ||
dfb9b8a4 AL |
296 | config REGULATOR_PCF50633 |
297 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 298 | depends on MFD_PCF50633 |
295c08bc | 299 | help |
dfb9b8a4 AL |
300 | Say Y here to support the voltage regulators and convertors |
301 | on PCF50633 | |
295c08bc | 302 | |
6ffc3270 LD |
303 | config REGULATOR_RC5T583 |
304 | tristate "RICOH RC5T583 Power regulators" | |
305 | depends on MFD_RC5T583 | |
306 | help | |
307 | Select this option to enable the power regulator of RICOH | |
308 | PMIC RC5T583. | |
309 | This driver supports the control of different power rails of device | |
310 | through regulator interface. The device supports multiple DCDC/LDO | |
311 | outputs which can be controlled by i2c communication. | |
312 | ||
cb74685e SK |
313 | config REGULATOR_S2MPS11 |
314 | tristate "Samsung S2MPS11 voltage regulator" | |
315 | depends on MFD_SEC_CORE | |
316 | help | |
317 | This driver supports a Samsung S2MPS11 voltage output regulator | |
318 | via I2C bus. S2MPS11 is comprised of high efficient Buck converters | |
319 | including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. | |
320 | ||
dfb9b8a4 AL |
321 | config REGULATOR_S5M8767 |
322 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 323 | depends on MFD_SEC_CORE |
5e428d5c | 324 | help |
dfb9b8a4 AL |
325 | This driver supports a Samsung S5M8767A voltage output regulator |
326 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
327 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 328 | |
d619bc14 LW |
329 | config REGULATOR_AB3100 |
330 | tristate "ST-Ericsson AB3100 Regulator functions" | |
331 | depends on AB3100_CORE | |
332 | default y if AB3100_CORE | |
333 | help | |
334 | These regulators correspond to functionality in the | |
335 | AB3100 analog baseband dealing with power regulators | |
336 | for the system. | |
337 | ||
dfb9b8a4 AL |
338 | config REGULATOR_AB8500 |
339 | bool "ST-Ericsson AB8500 Power Regulators" | |
340 | depends on AB8500_CORE | |
341 | help | |
342 | This driver supports the regulators found on the ST-Ericsson mixed | |
343 | signal AB8500 PMIC | |
344 | ||
345 | config REGULATOR_DBX500_PRCMU | |
346 | bool | |
347 | ||
348 | config REGULATOR_DB8500_PRCMU | |
349 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
350 | depends on MFD_DB8500_PRCMU | |
351 | select REGULATOR_DBX500_PRCMU | |
352 | help | |
353 | This driver supports the voltage domain regulators controlled by the | |
354 | DB8500 PRCMU | |
355 | ||
4c5dabce GG |
356 | config REGULATOR_PALMAS |
357 | tristate "TI Palmas PMIC Regulators" | |
358 | depends on MFD_PALMAS | |
359 | help | |
360 | If you wish to control the regulators on the Palmas series of | |
361 | chips say Y here. This will enable support for all the software | |
362 | controllable SMPS/LDO regulators. | |
363 | ||
364 | The regulators available on Palmas series chips vary depending | |
365 | on the muxing. This is handled automatically in the driver by | |
366 | reading the mux info from OTP. | |
367 | ||
0c570674 LD |
368 | config REGULATOR_TPS51632 |
369 | tristate "TI TPS51632 Power Regulator" | |
370 | depends on I2C | |
371 | select REGMAP_I2C | |
372 | help | |
373 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 374 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
375 | with Serial VID control and DVFS. |
376 | The voltage output can be configure through I2C interface or PWM | |
377 | interface. | |
378 | ||
2edd3b69 LW |
379 | config REGULATOR_TPS6105X |
380 | tristate "TI TPS6105X Power regulators" | |
381 | depends on TPS6105X | |
382 | default y if TPS6105X | |
383 | help | |
384 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
385 | It is a single boost converter primarily for white LEDs and | |
386 | audio amplifiers. | |
387 | ||
dfb9b8a4 | 388 | config REGULATOR_TPS62360 |
d1cf4f65 | 389 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
390 | depends on I2C |
391 | select REGMAP_I2C | |
392 | help | |
d1cf4f65 | 393 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
394 | regulator is meant for processor core supply. This chip is |
395 | high-frequency synchronous step down dc-dc converter optimized | |
396 | for battery-powered portable applications. | |
397 | ||
2de79850 AA |
398 | config REGULATOR_TPS65023 |
399 | tristate "TI TPS65023 Power regulators" | |
400 | depends on I2C | |
90923351 | 401 | select REGMAP_I2C |
2de79850 AA |
402 | help |
403 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
404 | three step-down converters and two general-purpose LDO voltage regulators. | |
405 | It supports TI's software based Class-2 SmartReflex implementation. | |
406 | ||
407 | config REGULATOR_TPS6507X | |
408 | tristate "TI TPS6507X Power regulators" | |
409 | depends on I2C | |
410 | help | |
411 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
412 | three step-down converters and two general-purpose LDO voltage regulators. | |
413 | It supports TI's software based Class-2 SmartReflex implementation. | |
414 | ||
452534e5 VB |
415 | config REGULATOR_TPS65090 |
416 | tristate "TI TPS65090 Power regulator" | |
417 | depends on MFD_TPS65090 | |
418 | help | |
419 | This driver provides support for the voltage regulators on the | |
420 | TI TPS65090 PMIC. | |
421 | ||
a493077f AC |
422 | config REGULATOR_TPS65217 |
423 | tristate "TI TPS65217 Power regulators" | |
424 | depends on MFD_TPS65217 | |
9260ad98 | 425 | help |
a493077f AC |
426 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
427 | provides three step-down converters and four general-purpose LDO | |
428 | voltage regulators. It supports software based voltage control | |
429 | for different voltage domains | |
9260ad98 | 430 | |
1394fd28 CC |
431 | config REGULATOR_TPS6524X |
432 | tristate "TI TPS6524X Power regulators" | |
433 | depends on SPI | |
be0e2d3e | 434 | help |
1394fd28 CC |
435 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
436 | provides three step-down converters and two general-purpose LDO | |
437 | voltage regulators. This device is interfaced using a customized | |
438 | serial interface currently supported on the sequencer serial | |
439 | port controller. | |
be0e2d3e | 440 | |
dfb9b8a4 AL |
441 | config REGULATOR_TPS6586X |
442 | tristate "TI TPS6586X Power regulators" | |
443 | depends on MFD_TPS6586X | |
51bd6943 | 444 | help |
dfb9b8a4 | 445 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 446 | |
518fb721 | 447 | config REGULATOR_TPS65910 |
ae0e6544 | 448 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 449 | depends on MFD_TPS65910 |
8b385d9b | 450 | help |
ae0e6544 | 451 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 452 | |
dfb9b8a4 AL |
453 | config REGULATOR_TPS65912 |
454 | tristate "TI TPS65912 Power regulator" | |
455 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 456 | help |
dfb9b8a4 | 457 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 458 | |
1a0bb679 LD |
459 | config REGULATOR_TPS80031 |
460 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
461 | depends on MFD_TPS80031 | |
462 | help | |
463 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
464 | Path and Battery Charger. It has 5 configurable step-down | |
465 | converters, 11 general purpose LDOs, VBUS generator and digital | |
466 | output to control regulators. | |
467 | ||
dfb9b8a4 AL |
468 | config REGULATOR_TWL4030 |
469 | bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" | |
470 | depends on TWL4030_CORE | |
1032fbfd | 471 | help |
dfb9b8a4 AL |
472 | This driver supports the voltage regulators provided by |
473 | this family of companion chips. | |
1032fbfd | 474 | |
31e54086 PM |
475 | config REGULATOR_VEXPRESS |
476 | tristate "Versatile Express regulators" | |
477 | depends on VEXPRESS_CONFIG | |
478 | help | |
479 | This driver provides support for voltage regulators available | |
480 | on the ARM Ltd's Versatile Express platform. | |
481 | ||
dfb9b8a4 AL |
482 | config REGULATOR_WM831X |
483 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
484 | depends on MFD_WM831X | |
49610235 | 485 | help |
dfb9b8a4 AL |
486 | Support the voltage and current regulators of the WM831x series |
487 | of PMIC devices. | |
49610235 | 488 | |
dfb9b8a4 AL |
489 | config REGULATOR_WM8350 |
490 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
491 | depends on MFD_WM8350 | |
1394fd28 | 492 | help |
dfb9b8a4 | 493 | This driver provides support for the voltage and current regulators |
c6d678b6 | 494 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 495 | |
dfb9b8a4 AL |
496 | config REGULATOR_WM8400 |
497 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
498 | depends on MFD_WM8400 | |
518fb721 | 499 | help |
dfb9b8a4 AL |
500 | This driver provides support for the voltage regulators of the |
501 | WM8400 AudioPlus PMIC. | |
518fb721 | 502 | |
dfb9b8a4 AL |
503 | config REGULATOR_WM8994 |
504 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
505 | depends on MFD_WM8994 | |
f7eb6c5e | 506 | help |
dfb9b8a4 AL |
507 | This driver provides support for the voltage regulators on the |
508 | WM8994 CODEC. | |
f7eb6c5e | 509 | |
f1e64f90 GL |
510 | config REGULATOR_AS3711 |
511 | tristate "AS3711 PMIC" | |
512 | depends on MFD_AS3711 | |
513 | help | |
514 | This driver provides support for the voltage regulators on the | |
515 | AS3711 PMIC | |
516 | ||
bbda14df | 517 | endif |
295c08bc | 518 |