]>
Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
b59320cc DJ |
2 | /* |
3 | * LP8755 High Performance Power Management Unit : System Interface Driver | |
4 | * (based on rev. 0.26) | |
5 | * Copyright 2012 Texas Instruments | |
6 | * | |
7 | * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> | |
b59320cc DJ |
8 | */ |
9 | ||
10 | #include <linux/module.h> | |
11 | #include <linux/slab.h> | |
12 | #include <linux/i2c.h> | |
13 | #include <linux/err.h> | |
14 | #include <linux/irq.h> | |
15 | #include <linux/interrupt.h> | |
16 | #include <linux/gpio.h> | |
17 | #include <linux/regmap.h> | |
b59320cc DJ |
18 | #include <linux/uaccess.h> |
19 | #include <linux/regulator/driver.h> | |
20 | #include <linux/regulator/machine.h> | |
21 | #include <linux/platform_data/lp8755.h> | |
22 | ||
23 | #define LP8755_REG_BUCK0 0x00 | |
24 | #define LP8755_REG_BUCK1 0x03 | |
25 | #define LP8755_REG_BUCK2 0x04 | |
26 | #define LP8755_REG_BUCK3 0x01 | |
27 | #define LP8755_REG_BUCK4 0x05 | |
28 | #define LP8755_REG_BUCK5 0x02 | |
29 | #define LP8755_REG_MAX 0xFF | |
30 | ||
31 | #define LP8755_BUCK_EN_M BIT(7) | |
32 | #define LP8755_BUCK_LINEAR_OUT_MAX 0x76 | |
33 | #define LP8755_BUCK_VOUT_M 0x7F | |
34 | ||
b59320cc DJ |
35 | struct lp8755_mphase { |
36 | int nreg; | |
37 | int buck_num[LP8755_BUCK_MAX]; | |
38 | }; | |
39 | ||
40 | struct lp8755_chip { | |
41 | struct device *dev; | |
42 | struct regmap *regmap; | |
43 | struct lp8755_platform_data *pdata; | |
44 | ||
45 | int irq; | |
46 | unsigned int irqmask; | |
47 | ||
48 | int mphase; | |
49 | struct regulator_dev *rdev[LP8755_BUCK_MAX]; | |
50 | }; | |
51 | ||
52 | /** | |
53 | *lp8755_read : read a single register value from lp8755. | |
54 | *@pchip : device to read from | |
55 | *@reg : register to read from | |
56 | *@val : pointer to store read value | |
57 | */ | |
58 | static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg, | |
59 | unsigned int *val) | |
60 | { | |
61 | return regmap_read(pchip->regmap, reg, val); | |
62 | } | |
63 | ||
64 | /** | |
65 | *lp8755_write : write a single register value to lp8755. | |
66 | *@pchip : device to write to | |
67 | *@reg : register to write to | |
68 | *@val : value to be written | |
69 | */ | |
70 | static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg, | |
71 | unsigned int val) | |
72 | { | |
73 | return regmap_write(pchip->regmap, reg, val); | |
74 | } | |
75 | ||
76 | /** | |
77 | *lp8755_update_bits : set the values of bit fields in lp8755 register. | |
78 | *@pchip : device to read from | |
79 | *@reg : register to update | |
80 | *@mask : bitmask to be changed | |
81 | *@val : value for bitmask | |
82 | */ | |
83 | static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg, | |
84 | unsigned int mask, unsigned int val) | |
85 | { | |
86 | return regmap_update_bits(pchip->regmap, reg, mask, val); | |
87 | } | |
88 | ||
89 | static int lp8755_buck_enable_time(struct regulator_dev *rdev) | |
90 | { | |
91 | int ret; | |
92 | unsigned int regval; | |
93 | enum lp8755_bucks id = rdev_get_id(rdev); | |
94 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
95 | ||
96 | ret = lp8755_read(pchip, 0x12 + id, ®val); | |
97 | if (ret < 0) { | |
80aec6f5 | 98 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
99 | return ret; |
100 | } | |
101 | return (regval & 0xff) * 100; | |
102 | } | |
103 | ||
104 | static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) | |
105 | { | |
106 | int ret; | |
107 | unsigned int regbval = 0x0; | |
108 | enum lp8755_bucks id = rdev_get_id(rdev); | |
109 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
110 | ||
111 | switch (mode) { | |
112 | case REGULATOR_MODE_FAST: | |
113 | /* forced pwm mode */ | |
114 | regbval = (0x01 << id); | |
115 | break; | |
116 | case REGULATOR_MODE_NORMAL: | |
117 | /* enable automatic pwm/pfm mode */ | |
118 | ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00); | |
119 | if (ret < 0) | |
120 | goto err_i2c; | |
121 | break; | |
122 | case REGULATOR_MODE_IDLE: | |
123 | /* enable automatic pwm/pfm/lppfm mode */ | |
124 | ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20); | |
125 | if (ret < 0) | |
126 | goto err_i2c; | |
127 | ||
128 | ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01); | |
129 | if (ret < 0) | |
130 | goto err_i2c; | |
131 | break; | |
132 | default: | |
133 | dev_err(pchip->dev, "Not supported buck mode %s\n", __func__); | |
134 | /* forced pwm mode */ | |
135 | regbval = (0x01 << id); | |
136 | } | |
137 | ||
138 | ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval); | |
139 | if (ret < 0) | |
140 | goto err_i2c; | |
141 | return ret; | |
142 | err_i2c: | |
80aec6f5 | 143 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
144 | return ret; |
145 | } | |
146 | ||
147 | static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev) | |
148 | { | |
149 | int ret; | |
150 | unsigned int regval; | |
151 | enum lp8755_bucks id = rdev_get_id(rdev); | |
152 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
153 | ||
154 | ret = lp8755_read(pchip, 0x06, ®val); | |
155 | if (ret < 0) | |
156 | goto err_i2c; | |
157 | ||
158 | /* mode fast means forced pwm mode */ | |
159 | if (regval & (0x01 << id)) | |
160 | return REGULATOR_MODE_FAST; | |
161 | ||
162 | ret = lp8755_read(pchip, 0x08 + id, ®val); | |
163 | if (ret < 0) | |
164 | goto err_i2c; | |
165 | ||
166 | /* mode idle means automatic pwm/pfm/lppfm mode */ | |
167 | if (regval & 0x20) | |
168 | return REGULATOR_MODE_IDLE; | |
169 | ||
170 | /* mode normal means automatic pwm/pfm mode */ | |
171 | return REGULATOR_MODE_NORMAL; | |
172 | ||
173 | err_i2c: | |
80aec6f5 | 174 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
175 | return 0; |
176 | } | |
177 | ||
178 | static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp) | |
179 | { | |
180 | int ret; | |
181 | unsigned int regval = 0x00; | |
182 | enum lp8755_bucks id = rdev_get_id(rdev); | |
183 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
184 | ||
185 | /* uV/us */ | |
186 | switch (ramp) { | |
187 | case 0 ... 230: | |
188 | regval = 0x07; | |
189 | break; | |
190 | case 231 ... 470: | |
191 | regval = 0x06; | |
192 | break; | |
193 | case 471 ... 940: | |
194 | regval = 0x05; | |
195 | break; | |
196 | case 941 ... 1900: | |
197 | regval = 0x04; | |
198 | break; | |
199 | case 1901 ... 3800: | |
200 | regval = 0x03; | |
201 | break; | |
202 | case 3801 ... 7500: | |
203 | regval = 0x02; | |
204 | break; | |
205 | case 7501 ... 15000: | |
206 | regval = 0x01; | |
207 | break; | |
208 | case 15001 ... 30000: | |
209 | regval = 0x00; | |
210 | break; | |
211 | default: | |
212 | dev_err(pchip->dev, | |
213 | "Not supported ramp value %d %s\n", ramp, __func__); | |
214 | return -EINVAL; | |
215 | } | |
216 | ||
217 | ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval); | |
218 | if (ret < 0) | |
219 | goto err_i2c; | |
220 | return ret; | |
221 | err_i2c: | |
80aec6f5 | 222 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
223 | return ret; |
224 | } | |
225 | ||
d42797a4 | 226 | static const struct regulator_ops lp8755_buck_ops = { |
56a942e9 | 227 | .map_voltage = regulator_map_voltage_linear, |
b59320cc DJ |
228 | .list_voltage = regulator_list_voltage_linear, |
229 | .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
230 | .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
231 | .enable = regulator_enable_regmap, | |
232 | .disable = regulator_disable_regmap, | |
233 | .is_enabled = regulator_is_enabled_regmap, | |
234 | .enable_time = lp8755_buck_enable_time, | |
235 | .set_mode = lp8755_buck_set_mode, | |
236 | .get_mode = lp8755_buck_get_mode, | |
237 | .set_ramp_delay = lp8755_buck_set_ramp, | |
238 | }; | |
239 | ||
240 | #define lp8755_rail(_id) "lp8755_buck"#_id | |
241 | #define lp8755_buck_init(_id)\ | |
242 | {\ | |
243 | .constraints = {\ | |
244 | .name = lp8755_rail(_id),\ | |
245 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\ | |
246 | .min_uV = 500000,\ | |
247 | .max_uV = 1675000,\ | |
248 | },\ | |
249 | } | |
250 | ||
251 | static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = { | |
510799ea AL |
252 | [LP8755_BUCK0] = lp8755_buck_init(0), |
253 | [LP8755_BUCK1] = lp8755_buck_init(1), | |
254 | [LP8755_BUCK2] = lp8755_buck_init(2), | |
255 | [LP8755_BUCK3] = lp8755_buck_init(3), | |
256 | [LP8755_BUCK4] = lp8755_buck_init(4), | |
257 | [LP8755_BUCK5] = lp8755_buck_init(5), | |
b59320cc DJ |
258 | }; |
259 | ||
260 | static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = { | |
510799ea AL |
261 | { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } }, |
262 | { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3, | |
263 | LP8755_BUCK4, LP8755_BUCK5 } }, | |
264 | { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4, | |
265 | LP8755_BUCK5} }, | |
266 | { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} }, | |
267 | { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} }, | |
268 | { 2, { LP8755_BUCK0, LP8755_BUCK5} }, | |
269 | { 1, { LP8755_BUCK0} }, | |
270 | { 2, { LP8755_BUCK0, LP8755_BUCK3} }, | |
271 | { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} }, | |
b59320cc DJ |
272 | }; |
273 | ||
274 | static int lp8755_init_data(struct lp8755_chip *pchip) | |
275 | { | |
276 | unsigned int regval; | |
277 | int ret, icnt, buck_num; | |
278 | struct lp8755_platform_data *pdata = pchip->pdata; | |
279 | ||
280 | /* read back muti-phase configuration */ | |
281 | ret = lp8755_read(pchip, 0x3D, ®val); | |
282 | if (ret < 0) | |
283 | goto out_i2c_error; | |
cad877ef | 284 | pchip->mphase = regval & 0x0F; |
b59320cc DJ |
285 | |
286 | /* set default data based on multi-phase config */ | |
287 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { | |
288 | buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; | |
289 | pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num]; | |
290 | } | |
291 | return ret; | |
292 | ||
293 | out_i2c_error: | |
80aec6f5 | 294 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
295 | return ret; |
296 | } | |
297 | ||
298 | #define lp8755_buck_desc(_id)\ | |
299 | {\ | |
300 | .name = lp8755_rail(_id),\ | |
301 | .id = LP8755_BUCK##_id,\ | |
302 | .ops = &lp8755_buck_ops,\ | |
303 | .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\ | |
304 | .uV_step = 10000,\ | |
305 | .min_uV = 500000,\ | |
306 | .type = REGULATOR_VOLTAGE,\ | |
307 | .owner = THIS_MODULE,\ | |
308 | .enable_reg = LP8755_REG_BUCK##_id,\ | |
309 | .enable_mask = LP8755_BUCK_EN_M,\ | |
310 | .vsel_reg = LP8755_REG_BUCK##_id,\ | |
311 | .vsel_mask = LP8755_BUCK_VOUT_M,\ | |
312 | } | |
313 | ||
367e90d1 | 314 | static const struct regulator_desc lp8755_regulators[] = { |
b59320cc DJ |
315 | lp8755_buck_desc(0), |
316 | lp8755_buck_desc(1), | |
317 | lp8755_buck_desc(2), | |
318 | lp8755_buck_desc(3), | |
319 | lp8755_buck_desc(4), | |
320 | lp8755_buck_desc(5), | |
321 | }; | |
322 | ||
323 | static int lp8755_regulator_init(struct lp8755_chip *pchip) | |
324 | { | |
325 | int ret, icnt, buck_num; | |
326 | struct lp8755_platform_data *pdata = pchip->pdata; | |
327 | struct regulator_config rconfig = { }; | |
328 | ||
329 | rconfig.regmap = pchip->regmap; | |
330 | rconfig.dev = pchip->dev; | |
331 | rconfig.driver_data = pchip; | |
332 | ||
333 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { | |
334 | buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; | |
335 | rconfig.init_data = pdata->buck_data[buck_num]; | |
336 | rconfig.of_node = pchip->dev->of_node; | |
337 | pchip->rdev[buck_num] = | |
57135250 HS |
338 | devm_regulator_register(pchip->dev, |
339 | &lp8755_regulators[buck_num], &rconfig); | |
b59320cc DJ |
340 | if (IS_ERR(pchip->rdev[buck_num])) { |
341 | ret = PTR_ERR(pchip->rdev[buck_num]); | |
a1a41ab4 AL |
342 | pchip->rdev[buck_num] = NULL; |
343 | dev_err(pchip->dev, "regulator init failed: buck %d\n", | |
344 | buck_num); | |
57135250 | 345 | return ret; |
b59320cc DJ |
346 | } |
347 | } | |
348 | ||
349 | return 0; | |
b59320cc DJ |
350 | } |
351 | ||
352 | static irqreturn_t lp8755_irq_handler(int irq, void *data) | |
353 | { | |
354 | int ret, icnt; | |
355 | unsigned int flag0, flag1; | |
356 | struct lp8755_chip *pchip = data; | |
357 | ||
358 | /* read flag0 register */ | |
359 | ret = lp8755_read(pchip, 0x0D, &flag0); | |
360 | if (ret < 0) | |
361 | goto err_i2c; | |
362 | /* clear flag register to pull up int. pin */ | |
363 | ret = lp8755_write(pchip, 0x0D, 0x00); | |
364 | if (ret < 0) | |
365 | goto err_i2c; | |
366 | ||
367 | /* sent power fault detection event to specific regulator */ | |
1200c60b | 368 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
369 | if ((flag0 & (0x4 << icnt)) |
370 | && (pchip->irqmask & (0x04 << icnt)) | |
89b2758c ST |
371 | && (pchip->rdev[icnt] != NULL)) { |
372 | regulator_lock(pchip->rdev[icnt]); | |
b59320cc DJ |
373 | regulator_notifier_call_chain(pchip->rdev[icnt], |
374 | LP8755_EVENT_PWR_FAULT, | |
375 | NULL); | |
89b2758c ST |
376 | regulator_unlock(pchip->rdev[icnt]); |
377 | } | |
b59320cc DJ |
378 | |
379 | /* read flag1 register */ | |
380 | ret = lp8755_read(pchip, 0x0E, &flag1); | |
381 | if (ret < 0) | |
382 | goto err_i2c; | |
383 | /* clear flag register to pull up int. pin */ | |
384 | ret = lp8755_write(pchip, 0x0E, 0x00); | |
385 | if (ret < 0) | |
386 | goto err_i2c; | |
387 | ||
48f1b4ef | 388 | /* send OCP event to all regulator devices */ |
b59320cc DJ |
389 | if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) |
390 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) | |
89b2758c ST |
391 | if (pchip->rdev[icnt] != NULL) { |
392 | regulator_lock(pchip->rdev[icnt]); | |
b59320cc DJ |
393 | regulator_notifier_call_chain(pchip->rdev[icnt], |
394 | LP8755_EVENT_OCP, | |
395 | NULL); | |
89b2758c ST |
396 | regulator_unlock(pchip->rdev[icnt]); |
397 | } | |
b59320cc | 398 | |
48f1b4ef | 399 | /* send OVP event to all regulator devices */ |
b59320cc DJ |
400 | if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) |
401 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) | |
89b2758c ST |
402 | if (pchip->rdev[icnt] != NULL) { |
403 | regulator_lock(pchip->rdev[icnt]); | |
b59320cc DJ |
404 | regulator_notifier_call_chain(pchip->rdev[icnt], |
405 | LP8755_EVENT_OVP, | |
406 | NULL); | |
89b2758c ST |
407 | regulator_unlock(pchip->rdev[icnt]); |
408 | } | |
b59320cc DJ |
409 | return IRQ_HANDLED; |
410 | ||
411 | err_i2c: | |
80aec6f5 | 412 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc DJ |
413 | return IRQ_NONE; |
414 | } | |
415 | ||
416 | static int lp8755_int_config(struct lp8755_chip *pchip) | |
417 | { | |
418 | int ret; | |
419 | unsigned int regval; | |
420 | ||
421 | if (pchip->irq == 0) { | |
422 | dev_warn(pchip->dev, "not use interrupt : %s\n", __func__); | |
423 | return 0; | |
424 | } | |
425 | ||
426 | ret = lp8755_read(pchip, 0x0F, ®val); | |
840499aa | 427 | if (ret < 0) { |
80aec6f5 | 428 | dev_err(pchip->dev, "i2c access error %s\n", __func__); |
b59320cc | 429 | return ret; |
840499aa | 430 | } |
b59320cc | 431 | |
840499aa AL |
432 | pchip->irqmask = regval; |
433 | return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL, | |
434 | lp8755_irq_handler, | |
435 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | |
436 | "lp8755-irq", pchip); | |
b59320cc DJ |
437 | } |
438 | ||
439 | static const struct regmap_config lp8755_regmap = { | |
440 | .reg_bits = 8, | |
441 | .val_bits = 8, | |
442 | .max_register = LP8755_REG_MAX, | |
443 | }; | |
444 | ||
445 | static int lp8755_probe(struct i2c_client *client, | |
446 | const struct i2c_device_id *id) | |
447 | { | |
448 | int ret, icnt; | |
449 | struct lp8755_chip *pchip; | |
dff91d0b | 450 | struct lp8755_platform_data *pdata = dev_get_platdata(&client->dev); |
b59320cc DJ |
451 | |
452 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | |
453 | dev_err(&client->dev, "i2c functionality check fail.\n"); | |
454 | return -EOPNOTSUPP; | |
455 | } | |
456 | ||
457 | pchip = devm_kzalloc(&client->dev, | |
458 | sizeof(struct lp8755_chip), GFP_KERNEL); | |
459 | if (!pchip) | |
460 | return -ENOMEM; | |
461 | ||
462 | pchip->dev = &client->dev; | |
463 | pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap); | |
464 | if (IS_ERR(pchip->regmap)) { | |
465 | ret = PTR_ERR(pchip->regmap); | |
466 | dev_err(&client->dev, "fail to allocate regmap %d\n", ret); | |
467 | return ret; | |
468 | } | |
469 | i2c_set_clientdata(client, pchip); | |
470 | ||
471 | if (pdata != NULL) { | |
472 | pchip->pdata = pdata; | |
473 | pchip->mphase = pdata->mphase; | |
474 | } else { | |
475 | pchip->pdata = devm_kzalloc(pchip->dev, | |
476 | sizeof(struct lp8755_platform_data), | |
477 | GFP_KERNEL); | |
478 | if (!pchip->pdata) | |
479 | return -ENOMEM; | |
480 | ret = lp8755_init_data(pchip); | |
240a5291 AL |
481 | if (ret < 0) { |
482 | dev_err(&client->dev, "fail to initialize chip\n"); | |
483 | return ret; | |
484 | } | |
b59320cc DJ |
485 | } |
486 | ||
487 | ret = lp8755_regulator_init(pchip); | |
240a5291 AL |
488 | if (ret < 0) { |
489 | dev_err(&client->dev, "fail to initialize regulators\n"); | |
57135250 | 490 | goto err; |
240a5291 | 491 | } |
b59320cc DJ |
492 | |
493 | pchip->irq = client->irq; | |
494 | ret = lp8755_int_config(pchip); | |
240a5291 AL |
495 | if (ret < 0) { |
496 | dev_err(&client->dev, "fail to irq config\n"); | |
57135250 | 497 | goto err; |
240a5291 | 498 | } |
b59320cc DJ |
499 | |
500 | return ret; | |
501 | ||
57135250 | 502 | err: |
b59320cc | 503 | /* output disable */ |
1200c60b | 504 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
505 | lp8755_write(pchip, icnt, 0x00); |
506 | ||
b59320cc DJ |
507 | return ret; |
508 | } | |
509 | ||
510 | static int lp8755_remove(struct i2c_client *client) | |
511 | { | |
512 | int icnt; | |
513 | struct lp8755_chip *pchip = i2c_get_clientdata(client); | |
514 | ||
1200c60b | 515 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
516 | lp8755_write(pchip, icnt, 0x00); |
517 | ||
b59320cc DJ |
518 | return 0; |
519 | } | |
520 | ||
521 | static const struct i2c_device_id lp8755_id[] = { | |
522 | {LP8755_NAME, 0}, | |
523 | {} | |
524 | }; | |
525 | ||
526 | MODULE_DEVICE_TABLE(i2c, lp8755_id); | |
527 | ||
528 | static struct i2c_driver lp8755_i2c_driver = { | |
529 | .driver = { | |
530 | .name = LP8755_NAME, | |
531 | }, | |
532 | .probe = lp8755_probe, | |
a1a41ab4 | 533 | .remove = lp8755_remove, |
b59320cc DJ |
534 | .id_table = lp8755_id, |
535 | }; | |
536 | ||
537 | static int __init lp8755_init(void) | |
538 | { | |
539 | return i2c_add_driver(&lp8755_i2c_driver); | |
540 | } | |
541 | ||
542 | subsys_initcall(lp8755_init); | |
543 | ||
544 | static void __exit lp8755_exit(void) | |
545 | { | |
546 | i2c_del_driver(&lp8755_i2c_driver); | |
547 | } | |
548 | ||
549 | module_exit(lp8755_exit); | |
550 | ||
551 | MODULE_DESCRIPTION("Texas Instruments lp8755 driver"); | |
552 | MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); | |
553 | MODULE_LICENSE("GPL v2"); |