]>
Commit | Line | Data |
---|---|---|
b59320cc DJ |
1 | /* |
2 | * LP8755 High Performance Power Management Unit : System Interface Driver | |
3 | * (based on rev. 0.26) | |
4 | * Copyright 2012 Texas Instruments | |
5 | * | |
6 | * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | * | |
12 | */ | |
13 | ||
14 | #include <linux/module.h> | |
15 | #include <linux/slab.h> | |
16 | #include <linux/i2c.h> | |
17 | #include <linux/err.h> | |
18 | #include <linux/irq.h> | |
19 | #include <linux/interrupt.h> | |
20 | #include <linux/gpio.h> | |
21 | #include <linux/regmap.h> | |
b59320cc DJ |
22 | #include <linux/uaccess.h> |
23 | #include <linux/regulator/driver.h> | |
24 | #include <linux/regulator/machine.h> | |
25 | #include <linux/platform_data/lp8755.h> | |
26 | ||
27 | #define LP8755_REG_BUCK0 0x00 | |
28 | #define LP8755_REG_BUCK1 0x03 | |
29 | #define LP8755_REG_BUCK2 0x04 | |
30 | #define LP8755_REG_BUCK3 0x01 | |
31 | #define LP8755_REG_BUCK4 0x05 | |
32 | #define LP8755_REG_BUCK5 0x02 | |
33 | #define LP8755_REG_MAX 0xFF | |
34 | ||
35 | #define LP8755_BUCK_EN_M BIT(7) | |
36 | #define LP8755_BUCK_LINEAR_OUT_MAX 0x76 | |
37 | #define LP8755_BUCK_VOUT_M 0x7F | |
38 | ||
b59320cc DJ |
39 | struct lp8755_mphase { |
40 | int nreg; | |
41 | int buck_num[LP8755_BUCK_MAX]; | |
42 | }; | |
43 | ||
44 | struct lp8755_chip { | |
45 | struct device *dev; | |
46 | struct regmap *regmap; | |
47 | struct lp8755_platform_data *pdata; | |
48 | ||
49 | int irq; | |
50 | unsigned int irqmask; | |
51 | ||
52 | int mphase; | |
53 | struct regulator_dev *rdev[LP8755_BUCK_MAX]; | |
54 | }; | |
55 | ||
56 | /** | |
57 | *lp8755_read : read a single register value from lp8755. | |
58 | *@pchip : device to read from | |
59 | *@reg : register to read from | |
60 | *@val : pointer to store read value | |
61 | */ | |
62 | static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg, | |
63 | unsigned int *val) | |
64 | { | |
65 | return regmap_read(pchip->regmap, reg, val); | |
66 | } | |
67 | ||
68 | /** | |
69 | *lp8755_write : write a single register value to lp8755. | |
70 | *@pchip : device to write to | |
71 | *@reg : register to write to | |
72 | *@val : value to be written | |
73 | */ | |
74 | static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg, | |
75 | unsigned int val) | |
76 | { | |
77 | return regmap_write(pchip->regmap, reg, val); | |
78 | } | |
79 | ||
80 | /** | |
81 | *lp8755_update_bits : set the values of bit fields in lp8755 register. | |
82 | *@pchip : device to read from | |
83 | *@reg : register to update | |
84 | *@mask : bitmask to be changed | |
85 | *@val : value for bitmask | |
86 | */ | |
87 | static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg, | |
88 | unsigned int mask, unsigned int val) | |
89 | { | |
90 | return regmap_update_bits(pchip->regmap, reg, mask, val); | |
91 | } | |
92 | ||
93 | static int lp8755_buck_enable_time(struct regulator_dev *rdev) | |
94 | { | |
95 | int ret; | |
96 | unsigned int regval; | |
97 | enum lp8755_bucks id = rdev_get_id(rdev); | |
98 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
99 | ||
100 | ret = lp8755_read(pchip, 0x12 + id, ®val); | |
101 | if (ret < 0) { | |
102 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
103 | return ret; | |
104 | } | |
105 | return (regval & 0xff) * 100; | |
106 | } | |
107 | ||
108 | static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) | |
109 | { | |
110 | int ret; | |
111 | unsigned int regbval = 0x0; | |
112 | enum lp8755_bucks id = rdev_get_id(rdev); | |
113 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
114 | ||
115 | switch (mode) { | |
116 | case REGULATOR_MODE_FAST: | |
117 | /* forced pwm mode */ | |
118 | regbval = (0x01 << id); | |
119 | break; | |
120 | case REGULATOR_MODE_NORMAL: | |
121 | /* enable automatic pwm/pfm mode */ | |
122 | ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00); | |
123 | if (ret < 0) | |
124 | goto err_i2c; | |
125 | break; | |
126 | case REGULATOR_MODE_IDLE: | |
127 | /* enable automatic pwm/pfm/lppfm mode */ | |
128 | ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20); | |
129 | if (ret < 0) | |
130 | goto err_i2c; | |
131 | ||
132 | ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01); | |
133 | if (ret < 0) | |
134 | goto err_i2c; | |
135 | break; | |
136 | default: | |
137 | dev_err(pchip->dev, "Not supported buck mode %s\n", __func__); | |
138 | /* forced pwm mode */ | |
139 | regbval = (0x01 << id); | |
140 | } | |
141 | ||
142 | ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval); | |
143 | if (ret < 0) | |
144 | goto err_i2c; | |
145 | return ret; | |
146 | err_i2c: | |
147 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
148 | return ret; | |
149 | } | |
150 | ||
151 | static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev) | |
152 | { | |
153 | int ret; | |
154 | unsigned int regval; | |
155 | enum lp8755_bucks id = rdev_get_id(rdev); | |
156 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
157 | ||
158 | ret = lp8755_read(pchip, 0x06, ®val); | |
159 | if (ret < 0) | |
160 | goto err_i2c; | |
161 | ||
162 | /* mode fast means forced pwm mode */ | |
163 | if (regval & (0x01 << id)) | |
164 | return REGULATOR_MODE_FAST; | |
165 | ||
166 | ret = lp8755_read(pchip, 0x08 + id, ®val); | |
167 | if (ret < 0) | |
168 | goto err_i2c; | |
169 | ||
170 | /* mode idle means automatic pwm/pfm/lppfm mode */ | |
171 | if (regval & 0x20) | |
172 | return REGULATOR_MODE_IDLE; | |
173 | ||
174 | /* mode normal means automatic pwm/pfm mode */ | |
175 | return REGULATOR_MODE_NORMAL; | |
176 | ||
177 | err_i2c: | |
178 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
179 | return 0; | |
180 | } | |
181 | ||
182 | static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp) | |
183 | { | |
184 | int ret; | |
185 | unsigned int regval = 0x00; | |
186 | enum lp8755_bucks id = rdev_get_id(rdev); | |
187 | struct lp8755_chip *pchip = rdev_get_drvdata(rdev); | |
188 | ||
189 | /* uV/us */ | |
190 | switch (ramp) { | |
191 | case 0 ... 230: | |
192 | regval = 0x07; | |
193 | break; | |
194 | case 231 ... 470: | |
195 | regval = 0x06; | |
196 | break; | |
197 | case 471 ... 940: | |
198 | regval = 0x05; | |
199 | break; | |
200 | case 941 ... 1900: | |
201 | regval = 0x04; | |
202 | break; | |
203 | case 1901 ... 3800: | |
204 | regval = 0x03; | |
205 | break; | |
206 | case 3801 ... 7500: | |
207 | regval = 0x02; | |
208 | break; | |
209 | case 7501 ... 15000: | |
210 | regval = 0x01; | |
211 | break; | |
212 | case 15001 ... 30000: | |
213 | regval = 0x00; | |
214 | break; | |
215 | default: | |
216 | dev_err(pchip->dev, | |
217 | "Not supported ramp value %d %s\n", ramp, __func__); | |
218 | return -EINVAL; | |
219 | } | |
220 | ||
221 | ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval); | |
222 | if (ret < 0) | |
223 | goto err_i2c; | |
224 | return ret; | |
225 | err_i2c: | |
226 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
227 | return ret; | |
228 | } | |
229 | ||
230 | static struct regulator_ops lp8755_buck_ops = { | |
231 | .list_voltage = regulator_list_voltage_linear, | |
232 | .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
233 | .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
234 | .enable = regulator_enable_regmap, | |
235 | .disable = regulator_disable_regmap, | |
236 | .is_enabled = regulator_is_enabled_regmap, | |
237 | .enable_time = lp8755_buck_enable_time, | |
238 | .set_mode = lp8755_buck_set_mode, | |
239 | .get_mode = lp8755_buck_get_mode, | |
240 | .set_ramp_delay = lp8755_buck_set_ramp, | |
241 | }; | |
242 | ||
243 | #define lp8755_rail(_id) "lp8755_buck"#_id | |
244 | #define lp8755_buck_init(_id)\ | |
245 | {\ | |
246 | .constraints = {\ | |
247 | .name = lp8755_rail(_id),\ | |
248 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\ | |
249 | .min_uV = 500000,\ | |
250 | .max_uV = 1675000,\ | |
251 | },\ | |
252 | } | |
253 | ||
254 | static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = { | |
510799ea AL |
255 | [LP8755_BUCK0] = lp8755_buck_init(0), |
256 | [LP8755_BUCK1] = lp8755_buck_init(1), | |
257 | [LP8755_BUCK2] = lp8755_buck_init(2), | |
258 | [LP8755_BUCK3] = lp8755_buck_init(3), | |
259 | [LP8755_BUCK4] = lp8755_buck_init(4), | |
260 | [LP8755_BUCK5] = lp8755_buck_init(5), | |
b59320cc DJ |
261 | }; |
262 | ||
263 | static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = { | |
510799ea AL |
264 | { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } }, |
265 | { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3, | |
266 | LP8755_BUCK4, LP8755_BUCK5 } }, | |
267 | { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4, | |
268 | LP8755_BUCK5} }, | |
269 | { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} }, | |
270 | { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} }, | |
271 | { 2, { LP8755_BUCK0, LP8755_BUCK5} }, | |
272 | { 1, { LP8755_BUCK0} }, | |
273 | { 2, { LP8755_BUCK0, LP8755_BUCK3} }, | |
274 | { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} }, | |
b59320cc DJ |
275 | }; |
276 | ||
277 | static int lp8755_init_data(struct lp8755_chip *pchip) | |
278 | { | |
279 | unsigned int regval; | |
280 | int ret, icnt, buck_num; | |
281 | struct lp8755_platform_data *pdata = pchip->pdata; | |
282 | ||
283 | /* read back muti-phase configuration */ | |
284 | ret = lp8755_read(pchip, 0x3D, ®val); | |
285 | if (ret < 0) | |
286 | goto out_i2c_error; | |
cad877ef | 287 | pchip->mphase = regval & 0x0F; |
b59320cc DJ |
288 | |
289 | /* set default data based on multi-phase config */ | |
290 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { | |
291 | buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; | |
292 | pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num]; | |
293 | } | |
294 | return ret; | |
295 | ||
296 | out_i2c_error: | |
297 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
298 | return ret; | |
299 | } | |
300 | ||
301 | #define lp8755_buck_desc(_id)\ | |
302 | {\ | |
303 | .name = lp8755_rail(_id),\ | |
304 | .id = LP8755_BUCK##_id,\ | |
305 | .ops = &lp8755_buck_ops,\ | |
306 | .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\ | |
307 | .uV_step = 10000,\ | |
308 | .min_uV = 500000,\ | |
309 | .type = REGULATOR_VOLTAGE,\ | |
310 | .owner = THIS_MODULE,\ | |
311 | .enable_reg = LP8755_REG_BUCK##_id,\ | |
312 | .enable_mask = LP8755_BUCK_EN_M,\ | |
313 | .vsel_reg = LP8755_REG_BUCK##_id,\ | |
314 | .vsel_mask = LP8755_BUCK_VOUT_M,\ | |
315 | } | |
316 | ||
317 | static struct regulator_desc lp8755_regulators[] = { | |
318 | lp8755_buck_desc(0), | |
319 | lp8755_buck_desc(1), | |
320 | lp8755_buck_desc(2), | |
321 | lp8755_buck_desc(3), | |
322 | lp8755_buck_desc(4), | |
323 | lp8755_buck_desc(5), | |
324 | }; | |
325 | ||
326 | static int lp8755_regulator_init(struct lp8755_chip *pchip) | |
327 | { | |
328 | int ret, icnt, buck_num; | |
329 | struct lp8755_platform_data *pdata = pchip->pdata; | |
330 | struct regulator_config rconfig = { }; | |
331 | ||
332 | rconfig.regmap = pchip->regmap; | |
333 | rconfig.dev = pchip->dev; | |
334 | rconfig.driver_data = pchip; | |
335 | ||
336 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { | |
337 | buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; | |
338 | rconfig.init_data = pdata->buck_data[buck_num]; | |
339 | rconfig.of_node = pchip->dev->of_node; | |
340 | pchip->rdev[buck_num] = | |
341 | regulator_register(&lp8755_regulators[buck_num], &rconfig); | |
342 | if (IS_ERR(pchip->rdev[buck_num])) { | |
343 | ret = PTR_ERR(pchip->rdev[buck_num]); | |
a1a41ab4 AL |
344 | pchip->rdev[buck_num] = NULL; |
345 | dev_err(pchip->dev, "regulator init failed: buck %d\n", | |
346 | buck_num); | |
b59320cc DJ |
347 | goto err_buck; |
348 | } | |
349 | } | |
350 | ||
351 | return 0; | |
352 | ||
353 | err_buck: | |
354 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) | |
a1a41ab4 | 355 | regulator_unregister(pchip->rdev[icnt]); |
b59320cc DJ |
356 | return ret; |
357 | } | |
358 | ||
359 | static irqreturn_t lp8755_irq_handler(int irq, void *data) | |
360 | { | |
361 | int ret, icnt; | |
362 | unsigned int flag0, flag1; | |
363 | struct lp8755_chip *pchip = data; | |
364 | ||
365 | /* read flag0 register */ | |
366 | ret = lp8755_read(pchip, 0x0D, &flag0); | |
367 | if (ret < 0) | |
368 | goto err_i2c; | |
369 | /* clear flag register to pull up int. pin */ | |
370 | ret = lp8755_write(pchip, 0x0D, 0x00); | |
371 | if (ret < 0) | |
372 | goto err_i2c; | |
373 | ||
374 | /* sent power fault detection event to specific regulator */ | |
1200c60b | 375 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
376 | if ((flag0 & (0x4 << icnt)) |
377 | && (pchip->irqmask & (0x04 << icnt)) | |
378 | && (pchip->rdev[icnt] != NULL)) | |
379 | regulator_notifier_call_chain(pchip->rdev[icnt], | |
380 | LP8755_EVENT_PWR_FAULT, | |
381 | NULL); | |
382 | ||
383 | /* read flag1 register */ | |
384 | ret = lp8755_read(pchip, 0x0E, &flag1); | |
385 | if (ret < 0) | |
386 | goto err_i2c; | |
387 | /* clear flag register to pull up int. pin */ | |
388 | ret = lp8755_write(pchip, 0x0E, 0x00); | |
389 | if (ret < 0) | |
390 | goto err_i2c; | |
391 | ||
392 | /* send OCP event to all regualtor devices */ | |
393 | if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) | |
394 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) | |
395 | if (pchip->rdev[icnt] != NULL) | |
396 | regulator_notifier_call_chain(pchip->rdev[icnt], | |
397 | LP8755_EVENT_OCP, | |
398 | NULL); | |
399 | ||
400 | /* send OVP event to all regualtor devices */ | |
401 | if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) | |
402 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) | |
403 | if (pchip->rdev[icnt] != NULL) | |
404 | regulator_notifier_call_chain(pchip->rdev[icnt], | |
405 | LP8755_EVENT_OVP, | |
406 | NULL); | |
407 | return IRQ_HANDLED; | |
408 | ||
409 | err_i2c: | |
410 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
411 | return IRQ_NONE; | |
412 | } | |
413 | ||
414 | static int lp8755_int_config(struct lp8755_chip *pchip) | |
415 | { | |
416 | int ret; | |
417 | unsigned int regval; | |
418 | ||
419 | if (pchip->irq == 0) { | |
420 | dev_warn(pchip->dev, "not use interrupt : %s\n", __func__); | |
421 | return 0; | |
422 | } | |
423 | ||
424 | ret = lp8755_read(pchip, 0x0F, ®val); | |
425 | if (ret < 0) | |
426 | goto err_i2c; | |
427 | pchip->irqmask = regval; | |
428 | ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler, | |
429 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | |
430 | "lp8755-irq", pchip); | |
431 | if (ret) | |
432 | return ret; | |
433 | ||
434 | return ret; | |
435 | ||
436 | err_i2c: | |
437 | dev_err(pchip->dev, "i2c acceess error %s\n", __func__); | |
438 | return ret; | |
439 | } | |
440 | ||
441 | static const struct regmap_config lp8755_regmap = { | |
442 | .reg_bits = 8, | |
443 | .val_bits = 8, | |
444 | .max_register = LP8755_REG_MAX, | |
445 | }; | |
446 | ||
447 | static int lp8755_probe(struct i2c_client *client, | |
448 | const struct i2c_device_id *id) | |
449 | { | |
450 | int ret, icnt; | |
451 | struct lp8755_chip *pchip; | |
452 | struct lp8755_platform_data *pdata = client->dev.platform_data; | |
453 | ||
454 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | |
455 | dev_err(&client->dev, "i2c functionality check fail.\n"); | |
456 | return -EOPNOTSUPP; | |
457 | } | |
458 | ||
459 | pchip = devm_kzalloc(&client->dev, | |
460 | sizeof(struct lp8755_chip), GFP_KERNEL); | |
461 | if (!pchip) | |
462 | return -ENOMEM; | |
463 | ||
464 | pchip->dev = &client->dev; | |
465 | pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap); | |
466 | if (IS_ERR(pchip->regmap)) { | |
467 | ret = PTR_ERR(pchip->regmap); | |
468 | dev_err(&client->dev, "fail to allocate regmap %d\n", ret); | |
469 | return ret; | |
470 | } | |
471 | i2c_set_clientdata(client, pchip); | |
472 | ||
473 | if (pdata != NULL) { | |
474 | pchip->pdata = pdata; | |
475 | pchip->mphase = pdata->mphase; | |
476 | } else { | |
477 | pchip->pdata = devm_kzalloc(pchip->dev, | |
478 | sizeof(struct lp8755_platform_data), | |
479 | GFP_KERNEL); | |
480 | if (!pchip->pdata) | |
481 | return -ENOMEM; | |
482 | ret = lp8755_init_data(pchip); | |
240a5291 AL |
483 | if (ret < 0) { |
484 | dev_err(&client->dev, "fail to initialize chip\n"); | |
485 | return ret; | |
486 | } | |
b59320cc DJ |
487 | } |
488 | ||
489 | ret = lp8755_regulator_init(pchip); | |
240a5291 AL |
490 | if (ret < 0) { |
491 | dev_err(&client->dev, "fail to initialize regulators\n"); | |
b59320cc | 492 | goto err_regulator; |
240a5291 | 493 | } |
b59320cc DJ |
494 | |
495 | pchip->irq = client->irq; | |
496 | ret = lp8755_int_config(pchip); | |
240a5291 AL |
497 | if (ret < 0) { |
498 | dev_err(&client->dev, "fail to irq config\n"); | |
b59320cc | 499 | goto err_irq; |
240a5291 | 500 | } |
b59320cc DJ |
501 | |
502 | return ret; | |
503 | ||
504 | err_irq: | |
b59320cc DJ |
505 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) |
506 | regulator_unregister(pchip->rdev[icnt]); | |
507 | ||
508 | err_regulator: | |
b59320cc | 509 | /* output disable */ |
1200c60b | 510 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
511 | lp8755_write(pchip, icnt, 0x00); |
512 | ||
b59320cc DJ |
513 | return ret; |
514 | } | |
515 | ||
516 | static int lp8755_remove(struct i2c_client *client) | |
517 | { | |
518 | int icnt; | |
519 | struct lp8755_chip *pchip = i2c_get_clientdata(client); | |
520 | ||
521 | for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) | |
522 | regulator_unregister(pchip->rdev[icnt]); | |
523 | ||
1200c60b | 524 | for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) |
b59320cc DJ |
525 | lp8755_write(pchip, icnt, 0x00); |
526 | ||
527 | if (pchip->irq != 0) | |
528 | free_irq(pchip->irq, pchip); | |
529 | ||
530 | return 0; | |
531 | } | |
532 | ||
533 | static const struct i2c_device_id lp8755_id[] = { | |
534 | {LP8755_NAME, 0}, | |
535 | {} | |
536 | }; | |
537 | ||
538 | MODULE_DEVICE_TABLE(i2c, lp8755_id); | |
539 | ||
540 | static struct i2c_driver lp8755_i2c_driver = { | |
541 | .driver = { | |
542 | .name = LP8755_NAME, | |
543 | }, | |
544 | .probe = lp8755_probe, | |
a1a41ab4 | 545 | .remove = lp8755_remove, |
b59320cc DJ |
546 | .id_table = lp8755_id, |
547 | }; | |
548 | ||
549 | static int __init lp8755_init(void) | |
550 | { | |
551 | return i2c_add_driver(&lp8755_i2c_driver); | |
552 | } | |
553 | ||
554 | subsys_initcall(lp8755_init); | |
555 | ||
556 | static void __exit lp8755_exit(void) | |
557 | { | |
558 | i2c_del_driver(&lp8755_i2c_driver); | |
559 | } | |
560 | ||
561 | module_exit(lp8755_exit); | |
562 | ||
563 | MODULE_DESCRIPTION("Texas Instruments lp8755 driver"); | |
564 | MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); | |
565 | MODULE_LICENSE("GPL v2"); |