]>
Commit | Line | Data |
---|---|---|
a10e763b | 1 | // SPDX-License-Identifier: GPL-2.0-only |
f0168a9b K |
2 | /* |
3 | * Regulator driver for LP87565 PMIC | |
4 | * | |
2ca76b3e | 5 | * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ |
f0168a9b K |
6 | */ |
7 | ||
8 | #include <linux/module.h> | |
9 | #include <linux/platform_device.h> | |
10 | #include <linux/regmap.h> | |
11 | ||
12 | #include <linux/mfd/lp87565.h> | |
13 | ||
81fdcef3 LC |
14 | #define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, \ |
15 | _er, _em, _ev, _delay, _lr, _cr) \ | |
f0168a9b K |
16 | [_id] = { \ |
17 | .desc = { \ | |
18 | .name = _name, \ | |
19 | .supply_name = _of "-in", \ | |
20 | .id = _id, \ | |
21 | .of_match = of_match_ptr(_of), \ | |
22 | .regulators_node = of_match_ptr("regulators"),\ | |
23 | .ops = &_ops, \ | |
24 | .n_voltages = _n, \ | |
25 | .type = REGULATOR_VOLTAGE, \ | |
26 | .owner = THIS_MODULE, \ | |
27 | .vsel_reg = _vr, \ | |
28 | .vsel_mask = _vm, \ | |
29 | .enable_reg = _er, \ | |
30 | .enable_mask = _em, \ | |
81fdcef3 | 31 | .enable_val = _ev, \ |
f0168a9b K |
32 | .ramp_delay = _delay, \ |
33 | .linear_ranges = _lr, \ | |
34 | .n_linear_ranges = ARRAY_SIZE(_lr), \ | |
d0ccbe11 AL |
35 | .curr_table = lp87565_buck_uA, \ |
36 | .n_current_limits = ARRAY_SIZE(lp87565_buck_uA),\ | |
37 | .csel_reg = (_cr), \ | |
38 | .csel_mask = LP87565_BUCK_CTRL_2_ILIM, \ | |
f0168a9b K |
39 | }, \ |
40 | .ctrl2_reg = _cr, \ | |
41 | } | |
42 | ||
43 | struct lp87565_regulator { | |
44 | struct regulator_desc desc; | |
45 | unsigned int ctrl2_reg; | |
46 | }; | |
47 | ||
48 | static const struct lp87565_regulator regulators[]; | |
49 | ||
60ab7f41 | 50 | static const struct linear_range buck0_1_2_3_ranges[] = { |
42f1ea48 | 51 | REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000), |
f0168a9b K |
52 | REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), |
53 | REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), | |
54 | }; | |
55 | ||
b7fbc592 | 56 | static const unsigned int lp87565_buck_ramp_delay[] = { |
f0168a9b K |
57 | 30000, 15000, 10000, 7500, 3800, 1900, 940, 470 |
58 | }; | |
59 | ||
60 | /* LP87565 BUCK current limit */ | |
61 | static const unsigned int lp87565_buck_uA[] = { | |
62 | 1500000, 2000000, 2500000, 3000000, 3500000, 4000000, 4500000, 5000000, | |
63 | }; | |
64 | ||
65 | static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev, | |
66 | int ramp_delay) | |
67 | { | |
68 | int id = rdev_get_id(rdev); | |
f0168a9b K |
69 | unsigned int reg; |
70 | int ret; | |
71 | ||
72 | if (ramp_delay <= 470) | |
73 | reg = 7; | |
74 | else if (ramp_delay <= 940) | |
75 | reg = 6; | |
76 | else if (ramp_delay <= 1900) | |
77 | reg = 5; | |
78 | else if (ramp_delay <= 3800) | |
79 | reg = 4; | |
80 | else if (ramp_delay <= 7500) | |
81 | reg = 3; | |
82 | else if (ramp_delay <= 10000) | |
83 | reg = 2; | |
84 | else if (ramp_delay <= 15000) | |
85 | reg = 1; | |
86 | else | |
87 | reg = 0; | |
88 | ||
6cadd8ae | 89 | ret = regmap_update_bits(rdev->regmap, regulators[id].ctrl2_reg, |
f0168a9b K |
90 | LP87565_BUCK_CTRL_2_SLEW_RATE, |
91 | reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE)); | |
92 | if (ret) { | |
6cadd8ae | 93 | dev_err(&rdev->dev, "SLEW RATE write failed: %d\n", ret); |
f0168a9b K |
94 | return ret; |
95 | } | |
96 | ||
97 | rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg]; | |
98 | ||
2d045e94 K |
99 | /* Conservatively give a 15% margin */ |
100 | rdev->constraints->ramp_delay = | |
101 | rdev->constraints->ramp_delay * 85 / 100; | |
102 | ||
f0168a9b K |
103 | return 0; |
104 | } | |
105 | ||
d0ccbe11 | 106 | /* Operations permitted on BUCKs */ |
b7fbc592 | 107 | static const struct regulator_ops lp87565_buck_ops = { |
f0168a9b K |
108 | .is_enabled = regulator_is_enabled_regmap, |
109 | .enable = regulator_enable_regmap, | |
110 | .disable = regulator_disable_regmap, | |
111 | .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
112 | .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
113 | .list_voltage = regulator_list_voltage_linear_range, | |
114 | .map_voltage = regulator_map_voltage_linear_range, | |
115 | .set_voltage_time_sel = regulator_set_voltage_time_sel, | |
116 | .set_ramp_delay = lp87565_buck_set_ramp_delay, | |
d0ccbe11 AL |
117 | .set_current_limit = regulator_set_current_limit_regmap, |
118 | .get_current_limit = regulator_get_current_limit_regmap, | |
f0168a9b K |
119 | }; |
120 | ||
121 | static const struct lp87565_regulator regulators[] = { | |
122 | LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops, | |
123 | 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, | |
124 | LP87565_REG_BUCK0_CTRL_1, | |
81fdcef3 LC |
125 | LP87565_BUCK_CTRL_1_EN | |
126 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL, | |
2d045e94 | 127 | LP87565_BUCK_CTRL_1_EN, 3230, |
f0168a9b K |
128 | buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), |
129 | LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops, | |
130 | 256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET, | |
131 | LP87565_REG_BUCK1_CTRL_1, | |
81fdcef3 LC |
132 | LP87565_BUCK_CTRL_1_EN | |
133 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL, | |
2d045e94 | 134 | LP87565_BUCK_CTRL_1_EN, 3230, |
f0168a9b K |
135 | buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2), |
136 | LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops, | |
137 | 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, | |
138 | LP87565_REG_BUCK2_CTRL_1, | |
81fdcef3 LC |
139 | LP87565_BUCK_CTRL_1_EN | |
140 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL, | |
2d045e94 | 141 | LP87565_BUCK_CTRL_1_EN, 3230, |
f0168a9b K |
142 | buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), |
143 | LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops, | |
144 | 256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET, | |
145 | LP87565_REG_BUCK3_CTRL_1, | |
81fdcef3 LC |
146 | LP87565_BUCK_CTRL_1_EN | |
147 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL, | |
2d045e94 | 148 | LP87565_BUCK_CTRL_1_EN, 3230, |
f0168a9b K |
149 | buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2), |
150 | LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops, | |
151 | 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, | |
152 | LP87565_REG_BUCK0_CTRL_1, | |
2f51a260 | 153 | LP87565_BUCK_CTRL_1_EN | |
81fdcef3 LC |
154 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL | |
155 | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, | |
156 | LP87565_BUCK_CTRL_1_EN | | |
2f51a260 | 157 | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230, |
f0168a9b K |
158 | buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), |
159 | LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops, | |
160 | 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, | |
161 | LP87565_REG_BUCK2_CTRL_1, | |
81fdcef3 LC |
162 | LP87565_BUCK_CTRL_1_EN | |
163 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL, | |
2d045e94 | 164 | LP87565_BUCK_CTRL_1_EN, 3230, |
f0168a9b | 165 | buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), |
7ee63bd7 K |
166 | LP87565_REGULATOR("BUCK3210", LP87565_BUCK_3210, "buck3210", |
167 | lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, | |
168 | LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, | |
169 | LP87565_BUCK_CTRL_1_EN | | |
81fdcef3 LC |
170 | LP87565_BUCK_CTRL_1_EN_PIN_CTRL | |
171 | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, | |
172 | LP87565_BUCK_CTRL_1_EN | | |
7ee63bd7 K |
173 | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230, |
174 | buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), | |
f0168a9b K |
175 | }; |
176 | ||
177 | static int lp87565_regulator_probe(struct platform_device *pdev) | |
178 | { | |
179 | struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent); | |
180 | struct regulator_config config = { }; | |
181 | struct regulator_dev *rdev; | |
a853c0a0 | 182 | int i, min_idx, max_idx; |
f0168a9b K |
183 | |
184 | platform_set_drvdata(pdev, lp87565); | |
185 | ||
186 | config.dev = &pdev->dev; | |
187 | config.dev->of_node = lp87565->dev->of_node; | |
188 | config.driver_data = lp87565; | |
189 | config.regmap = lp87565->regmap; | |
190 | ||
7ee63bd7 K |
191 | switch (lp87565->dev_type) { |
192 | case LP87565_DEVICE_TYPE_LP87565_Q1: | |
f0168a9b K |
193 | min_idx = LP87565_BUCK_10; |
194 | max_idx = LP87565_BUCK_23; | |
7ee63bd7 K |
195 | break; |
196 | case LP87565_DEVICE_TYPE_LP87561_Q1: | |
197 | min_idx = LP87565_BUCK_3210; | |
198 | max_idx = LP87565_BUCK_3210; | |
f3f4363b | 199 | break; |
7ee63bd7 | 200 | default: |
a853c0a0 AL |
201 | min_idx = LP87565_BUCK_0; |
202 | max_idx = LP87565_BUCK_3; | |
203 | break; | |
f0168a9b K |
204 | } |
205 | ||
206 | for (i = min_idx; i <= max_idx; i++) { | |
207 | rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc, | |
208 | &config); | |
209 | if (IS_ERR(rdev)) { | |
210 | dev_err(lp87565->dev, "failed to register %s regulator\n", | |
211 | pdev->name); | |
212 | return PTR_ERR(rdev); | |
213 | } | |
214 | } | |
215 | ||
216 | return 0; | |
217 | } | |
218 | ||
219 | static const struct platform_device_id lp87565_regulator_id_table[] = { | |
220 | { "lp87565-regulator", }, | |
221 | { "lp87565-q1-regulator", }, | |
222 | { /* sentinel */ } | |
223 | }; | |
224 | MODULE_DEVICE_TABLE(platform, lp87565_regulator_id_table); | |
225 | ||
226 | static struct platform_driver lp87565_regulator_driver = { | |
227 | .driver = { | |
228 | .name = "lp87565-pmic", | |
229 | }, | |
230 | .probe = lp87565_regulator_probe, | |
231 | .id_table = lp87565_regulator_id_table, | |
232 | }; | |
233 | module_platform_driver(lp87565_regulator_driver); | |
234 | ||
235 | MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); | |
236 | MODULE_DESCRIPTION("LP87565 voltage regulator driver"); | |
237 | MODULE_LICENSE("GPL v2"); |