[mirror_ubuntu-artful-kernel.git] / drivers / regulator / max1586.c

/*
 * max1586.c  --  Voltage and current regulation for the Maxim 1586
 *
 * Copyright (C) 2008 Robert Jarzmik
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/slab.h>
#include <linux/regulator/max1586.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>

#define MAX1586_V3_MAX_VSEL 31
#define MAX1586_V6_MAX_VSEL 3

#define MAX1586_V3_MIN_UV   700000
#define MAX1586_V3_MAX_UV  1475000

#define MAX1586_V6_MIN_UV        0
#define MAX1586_V6_MAX_UV  3000000

#define I2C_V3_SELECT (0 << 5)
#define I2C_V6_SELECT (1 << 5)

struct max1586_data {
	struct i2c_client *client;

	/* min/max V3 voltage */
	unsigned int min_uV;
	unsigned int max_uV;

	unsigned int v3_curr_sel;
	unsigned int v6_curr_sel;
};

/*
 * V6 voltage
 * On I2C bus, sending a "x" byte to the max1586 means :
 *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
 * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
 */
static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };

/*
 * V3 voltage
 * On I2C bus, sending a "x" byte to the max1586 means :
 *   set V3 to 0.700V + (x & 0x1f) * 0.025V
 * This voltage can be increased by external resistors
 * R24 and R25=100kOhm as described in the data sheet.
 * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
 */
static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

	return max1586->v3_curr_sel;
}

static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
				      unsigned selector)
{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	struct i2c_client *client = max1586->client;
	int ret;
	u8 v3_prog;

	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
		regulator_list_voltage_linear(rdev, selector) / 1000);

	v3_prog = I2C_V3_SELECT | (u8) selector;
	ret = i2c_smbus_write_byte(client, v3_prog);
	if (ret)
		return ret;

	max1586->v3_curr_sel = selector;

	return 0;
}

static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

	return max1586->v6_curr_sel;
}

static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
				      unsigned int selector)
{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	struct i2c_client *client = max1586->client;
	u8 v6_prog;
	int ret;

	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
		rdev->desc->volt_table[selector] / 1000);

	v6_prog = I2C_V6_SELECT | (u8) selector;
	ret = i2c_smbus_write_byte(client, v6_prog);
	if (ret)
		return ret;

	max1586->v6_curr_sel = selector;

	return 0;
}

/*
 * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
 * the set up value.
 */
static struct regulator_ops max1586_v3_ops = {
	.get_voltage_sel = max1586_v3_get_voltage_sel,
	.set_voltage_sel = max1586_v3_set_voltage_sel,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
};

static struct regulator_ops max1586_v6_ops = {
	.get_voltage_sel = max1586_v6_get_voltage_sel,
	.set_voltage_sel = max1586_v6_set_voltage_sel,
	.list_voltage = regulator_list_voltage_table,
};

static struct regulator_desc max1586_reg[] = {
	{
		.name = "Output_V3",
		.id = MAX1586_V3,
		.ops = &max1586_v3_ops,
		.type = REGULATOR_VOLTAGE,
		.n_voltages = MAX1586_V3_MAX_VSEL + 1,
		.owner = THIS_MODULE,
	},
	{
		.name = "Output_V6",
		.id = MAX1586_V6,
		.ops = &max1586_v6_ops,
		.type = REGULATOR_VOLTAGE,
		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
		.volt_table = v6_voltages_uv,
		.owner = THIS_MODULE,
	},
};

static int of_get_max1586_platform_data(struct device *dev,
				 struct max1586_platform_data *pdata)
{
	struct max1586_subdev_data *sub;
	struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
	struct device_node *np = dev->of_node;
	int i, matched;

	if (of_property_read_u32(np, "v3-gain",
				 &pdata->v3_gain) < 0) {
		dev_err(dev, "%s has no 'v3-gain' property\n", np->full_name);
		return -EINVAL;
	}

	np = of_get_child_by_name(np, "regulators");
	if (!np) {
		dev_err(dev, "missing 'regulators' subnode in DT\n");
		return -EINVAL;
	}

	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
		rmatch[i].name = max1586_reg[i].name;

	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
	of_node_put(np);
	/*
	 * If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
	 * return 0, which signals the normal situation where no subregulator is
	 * available. This is normal because the max1586 doesn't provide any
	 * readback support, so the subregulators can't report any status
	 * anyway.  If matched < 0, return the error.
	 */
	if (matched <= 0)
		return matched;

	pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) *
						matched, GFP_KERNEL);
	if (!pdata->subdevs)
		return -ENOMEM;

	pdata->num_subdevs = matched;
	sub = pdata->subdevs;

	for (i = 0; i < matched; i++) {
		sub->id = i;
		sub->name = rmatch[i].of_node->name;
		sub->platform_data = rmatch[i].init_data;
		sub++;
	}

	return 0;
}

static const struct of_device_id max1586_of_match[] = {
	{ .compatible = "maxim,max1586", },
	{},
};
MODULE_DEVICE_TABLE(of, max1586_of_match);

static int max1586_pmic_probe(struct i2c_client *client,
					const struct i2c_device_id *i2c_id)
{
	struct max1586_platform_data *pdata, pdata_of;
	struct regulator_config config = { };
	struct max1586_data *max1586;
	int i, id, ret;
	const struct of_device_id *match;

	pdata = dev_get_platdata(&client->dev);
	if (client->dev.of_node && !pdata) {
		match = of_match_device(of_match_ptr(max1586_of_match),
					&client->dev);
		if (!match) {
			dev_err(&client->dev, "Error: No device match found\n");
			return -ENODEV;
		}
		ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
		if (ret < 0)
			return ret;
		pdata = &pdata_of;
	}

	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
			GFP_KERNEL);
	if (!max1586)
		return -ENOMEM;

	max1586->client = client;

	if (!pdata->v3_gain)
		return -EINVAL;

	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;

	/* Set curr_sel to default voltage on power-up */
	max1586->v3_curr_sel = 24; /* 1.3V */
	max1586->v6_curr_sel = 0;

	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
		struct regulator_dev *rdev;

		id = pdata->subdevs[i].id;
		if (!pdata->subdevs[i].platform_data)
			continue;
		if (id < MAX1586_V3 || id > MAX1586_V6) {
			dev_err(&client->dev, "invalid regulator id %d\n", id);
			return -EINVAL;
		}

		if (id == MAX1586_V3) {
			max1586_reg[id].min_uV = max1586->min_uV;
			max1586_reg[id].uV_step =
					(max1586->max_uV - max1586->min_uV) /
					MAX1586_V3_MAX_VSEL;
		}

		config.dev = &client->dev;
		config.init_data = pdata->subdevs[i].platform_data;
		config.driver_data = max1586;

		rdev = devm_regulator_register(&client->dev,
						  &max1586_reg[id], &config);
		if (IS_ERR(rdev)) {
			dev_err(&client->dev, "failed to register %s\n",
				max1586_reg[id].name);
			return PTR_ERR(rdev);
		}
	}

	i2c_set_clientdata(client, max1586);
	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
	return 0;
}

static const struct i2c_device_id max1586_id[] = {
	{ "max1586", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, max1586_id);

static struct i2c_driver max1586_pmic_driver = {
	.probe = max1586_pmic_probe,
	.driver		= {
		.name	= "max1586",
		.of_match_table = of_match_ptr(max1586_of_match),
	},
	.id_table	= max1586_id,
};

static int __init max1586_pmic_init(void)
{
	return i2c_add_driver(&max1586_pmic_driver);
}
subsys_initcall(max1586_pmic_init);

static void __exit max1586_pmic_exit(void)
{
	i2c_del_driver(&max1586_pmic_driver);
}
module_exit(max1586_pmic_exit);

/* Module information */
MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
MODULE_AUTHOR("Robert Jarzmik");
MODULE_LICENSE("GPL");
Commit	Line	Data
55f4fa4e RJ	1	/*
	2	* max1586.c -- Voltage and current regulation for the Maxim 1586
	3	*
	4	* Copyright (C) 2008 Robert Jarzmik
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20	#include <linux/module.h>
	21	#include <linux/err.h>
	22	#include <linux/i2c.h>
	23	#include <linux/platform_device.h>
	24	#include <linux/regulator/driver.h>
5a0e3ad6	25	#include <linux/slab.h>
55f4fa4e	26	#include <linux/regulator/max1586.h>
4e005179 RJ	27	#include <linux/of_device.h>
4e005179 RJ	28	#include <linux/regulator/of_regulator.h>
55f4fa4e RJ	29
	30	#define MAX1586_V3_MAX_VSEL 31
	31	#define MAX1586_V6_MAX_VSEL 3
	32
	33	#define MAX1586_V3_MIN_UV 700000
	34	#define MAX1586_V3_MAX_UV 1475000
55f4fa4e RJ	35
	36	#define MAX1586_V6_MIN_UV 0
	37	#define MAX1586_V6_MAX_UV 3000000
	38
	39	#define I2C_V3_SELECT (0 << 5)
	40	#define I2C_V6_SELECT (1 << 5)
	41
b110a8fb PZ	42	struct max1586_data {
	43	struct i2c_client *client;
	44
	45	/* min/max V3 voltage */
c8f1e502 PZ	46	unsigned int min_uV;
c8f1e502 PZ	47	unsigned int max_uV;
b110a8fb	48
4efd9dfe AL	49	unsigned int v3_curr_sel;
4efd9dfe AL	50	unsigned int v6_curr_sel;
b110a8fb PZ	51	};
b110a8fb PZ	52
96d25221 AL	53	/*
	54	* V6 voltage
	55	* On I2C bus, sending a "x" byte to the max1586 means :
	56	* set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
	57	* As regulator framework doesn't accept voltages to be 0V, we use 1uV.
	58	*/
d67c42cc	59	static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
96d25221	60
55f4fa4e RJ	61	/*
	62	* V3 voltage
	63	* On I2C bus, sending a "x" byte to the max1586 means :
	64	* set V3 to 0.700V + (x & 0x1f) * 0.025V
b110a8fb PZ	65	* This voltage can be increased by external resistors
	66	* R24 and R25=100kOhm as described in the data sheet.
	67	* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
55f4fa4e	68	*/
4efd9dfe AL	69	static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
	70	{
	71	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	72
	73	return max1586->v3_curr_sel;
	74	}
	75
9b558950 AL	76	static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
9b558950 AL	77	unsigned selector)
55f4fa4e	78	{
b110a8fb PZ	79	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
b110a8fb PZ	80	struct i2c_client *client = max1586->client;
4efd9dfe	81	int ret;
55f4fa4e RJ	82	u8 v3_prog;
55f4fa4e RJ	83
55f4fa4e	84	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
9b558950	85	regulator_list_voltage_linear(rdev, selector) / 1000);
55f4fa4e	86
9b558950	87	v3_prog = I2C_V3_SELECT \| (u8) selector;
4efd9dfe AL	88	ret = i2c_smbus_write_byte(client, v3_prog);
	89	if (ret)
	90	return ret;
	91
	92	max1586->v3_curr_sel = selector;
	93
	94	return 0;
	95	}
	96
	97	static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
	98	{
	99	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	100
	101	return max1586->v6_curr_sel;
55f4fa4e RJ	102	}
55f4fa4e RJ	103
0d032731 AL	104	static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
0d032731 AL	105	unsigned int selector)
55f4fa4e	106	{
4efd9dfe AL	107	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
4efd9dfe AL	108	struct i2c_client *client = max1586->client;
55f4fa4e	109	u8 v6_prog;
4efd9dfe	110	int ret;
55f4fa4e	111
55f4fa4e	112	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
0d032731	113	rdev->desc->volt_table[selector] / 1000);
55f4fa4e	114
0d032731	115	v6_prog = I2C_V6_SELECT \| (u8) selector;
4efd9dfe AL	116	ret = i2c_smbus_write_byte(client, v6_prog);
	117	if (ret)
	118	return ret;
	119
	120	max1586->v6_curr_sel = selector;
	121
	122	return 0;
55f4fa4e RJ	123	}
55f4fa4e RJ	124
55f4fa4e RJ	125	/*
	126	* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
	127	* the set up value.
	128	*/
	129	static struct regulator_ops max1586_v3_ops = {
4efd9dfe	130	.get_voltage_sel = max1586_v3_get_voltage_sel,
9b558950	131	.set_voltage_sel = max1586_v3_set_voltage_sel,
93f5de5c	132	.list_voltage = regulator_list_voltage_linear,
9b558950	133	.map_voltage = regulator_map_voltage_linear,
55f4fa4e RJ	134	};
	135
	136	static struct regulator_ops max1586_v6_ops = {
4efd9dfe	137	.get_voltage_sel = max1586_v6_get_voltage_sel,
0d032731	138	.set_voltage_sel = max1586_v6_set_voltage_sel,
96d25221	139	.list_voltage = regulator_list_voltage_table,
55f4fa4e RJ	140	};
55f4fa4e RJ	141
93f5de5c	142	static struct regulator_desc max1586_reg[] = {
55f4fa4e RJ	143	{
	144	.name = "Output_V3",
	145	.id = MAX1586_V3,
	146	.ops = &max1586_v3_ops,
	147	.type = REGULATOR_VOLTAGE,
	148	.n_voltages = MAX1586_V3_MAX_VSEL + 1,
	149	.owner = THIS_MODULE,
	150	},
	151	{
	152	.name = "Output_V6",
	153	.id = MAX1586_V6,
	154	.ops = &max1586_v6_ops,
	155	.type = REGULATOR_VOLTAGE,
	156	.n_voltages = MAX1586_V6_MAX_VSEL + 1,
96d25221	157	.volt_table = v6_voltages_uv,
55f4fa4e RJ	158	.owner = THIS_MODULE,
	159	},
	160	};
	161
5ccedf03	162	static int of_get_max1586_platform_data(struct device *dev,
4e005179 RJ	163	struct max1586_platform_data *pdata)
	164	{
	165	struct max1586_subdev_data *sub;
d83aef13	166	struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
4e005179 RJ	167	struct device_node *np = dev->of_node;
	168	int i, matched;
	169
	170	if (of_property_read_u32(np, "v3-gain",
	171	&pdata->v3_gain) < 0) {
	172	dev_err(dev, "%s has no 'v3-gain' property\n", np->full_name);
	173	return -EINVAL;
	174	}
	175
	176	np = of_get_child_by_name(np, "regulators");
	177	if (!np) {
	178	dev_err(dev, "missing 'regulators' subnode in DT\n");
	179	return -EINVAL;
	180	}
	181
	182	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
	183	rmatch[i].name = max1586_reg[i].name;
	184
	185	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
	186	of_node_put(np);
	187	/*
	188	* If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
	189	* return 0, which signals the normal situation where no subregulator is
	190	* available. This is normal because the max1586 doesn't provide any
	191	* readback support, so the subregulators can't report any status
	192	* anyway. If matched < 0, return the error.
	193	*/
	194	if (matched <= 0)
	195	return matched;
	196
	197	pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) *
	198	matched, GFP_KERNEL);
	199	if (!pdata->subdevs)
	200	return -ENOMEM;
	201
	202	pdata->num_subdevs = matched;
	203	sub = pdata->subdevs;
	204
	205	for (i = 0; i < matched; i++) {
	206	sub->id = i;
	207	sub->name = rmatch[i].of_node->name;
	208	sub->platform_data = rmatch[i].init_data;
	209	sub++;
	210	}
	211
	212	return 0;
	213	}
	214
	215	static const struct of_device_id max1586_of_match[] = {
	216	{ .compatible = "maxim,max1586", },
	217	{},
	218	};
	219	MODULE_DEVICE_TABLE(of, max1586_of_match);
	220
a5023574	221	static int max1586_pmic_probe(struct i2c_client *client,
bd88c9b2	222	const struct i2c_device_id *i2c_id)
55f4fa4e	223	{
4e005179	224	struct max1586_platform_data *pdata, pdata_of;
c172708d	225	struct regulator_config config = { };
b110a8fb	226	struct max1586_data *max1586;
4e005179 RJ	227	int i, id, ret;
	228	const struct of_device_id *match;
	229
	230	pdata = dev_get_platdata(&client->dev);
	231	if (client->dev.of_node && !pdata) {
	232	match = of_match_device(of_match_ptr(max1586_of_match),
	233	&client->dev);
	234	if (!match) {
	235	dev_err(&client->dev, "Error: No device match found\n");
	236	return -ENODEV;
	237	}
	238	ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
	239	if (ret < 0)
	240	return ret;
	241	pdata = &pdata_of;
	242	}
b110a8fb	243
2d45e78a	244	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
b110a8fb PZ	245	GFP_KERNEL);
b110a8fb PZ	246	if (!max1586)
b7bd05b8	247	return -ENOMEM;
55f4fa4e	248
b110a8fb	249	max1586->client = client;
55f4fa4e	250
b7bd05b8 AL	251	if (!pdata->v3_gain)
	252	return -EINVAL;
	253
c8f1e502 PZ	254	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
c8f1e502 PZ	255	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
b110a8fb	256
4efd9dfe AL	257	/* Set curr_sel to default voltage on power-up */
	258	max1586->v3_curr_sel = 24; /* 1.3V */
	259	max1586->v6_curr_sel = 0;
	260
55f4fa4e	261	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
aaa46b4b KK	262	struct regulator_dev *rdev;
aaa46b4b KK	263
55f4fa4e RJ	264	id = pdata->subdevs[i].id;
	265	if (!pdata->subdevs[i].platform_data)
	266	continue;
	267	if (id < MAX1586_V3 \|\| id > MAX1586_V6) {
	268	dev_err(&client->dev, "invalid regulator id %d\n", id);
249cc1f2	269	return -EINVAL;
55f4fa4e	270	}
c172708d	271
93f5de5c AL	272	if (id == MAX1586_V3) {
	273	max1586_reg[id].min_uV = max1586->min_uV;
	274	max1586_reg[id].uV_step =
	275	(max1586->max_uV - max1586->min_uV) /
	276	MAX1586_V3_MAX_VSEL;
	277	}
	278
c172708d MB	279	config.dev = &client->dev;
	280	config.init_data = pdata->subdevs[i].platform_data;
	281	config.driver_data = max1586;
	282
aaa46b4b	283	rdev = devm_regulator_register(&client->dev,
249cc1f2	284	&max1586_reg[id], &config);
aaa46b4b	285	if (IS_ERR(rdev)) {
55f4fa4e RJ	286	dev_err(&client->dev, "failed to register %s\n",
55f4fa4e RJ	287	max1586_reg[id].name);
aaa46b4b	288	return PTR_ERR(rdev);
55f4fa4e RJ	289	}
	290	}
	291
7c4c25e4	292	i2c_set_clientdata(client, max1586);
55f4fa4e RJ	293	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
55f4fa4e RJ	294	return 0;
55f4fa4e RJ	295	}
	296
	297	static const struct i2c_device_id max1586_id[] = {
	298	{ "max1586", 0 },
	299	{ }
	300	};
	301	MODULE_DEVICE_TABLE(i2c, max1586_id);
	302
	303	static struct i2c_driver max1586_pmic_driver = {
	304	.probe = max1586_pmic_probe,
55f4fa4e RJ	305	.driver = {
55f4fa4e RJ	306	.name = "max1586",
4e005179	307	.of_match_table = of_match_ptr(max1586_of_match),
55f4fa4e RJ	308	},
	309	.id_table = max1586_id,
	310	};
	311
	312	static int __init max1586_pmic_init(void)
	313	{
	314	return i2c_add_driver(&max1586_pmic_driver);
	315	}
	316	subsys_initcall(max1586_pmic_init);
	317
	318	static void __exit max1586_pmic_exit(void)
	319	{
	320	i2c_del_driver(&max1586_pmic_driver);
	321	}
	322	module_exit(max1586_pmic_exit);
	323
	324	/* Module information */
	325	MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
	326	MODULE_AUTHOR("Robert Jarzmik");
	327	MODULE_LICENSE("GPL");