]>
Commit | Line | Data |
---|---|---|
2874c5fd | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
fa16a5c1 | 2 | /* |
c4aa6f31 | 3 | * twl-regulator.c -- support regulators in twl4030/twl6030 family chips |
fa16a5c1 DB |
4 | * |
5 | * Copyright (C) 2008 David Brownell | |
fa16a5c1 DB |
6 | */ |
7 | ||
8 | #include <linux/module.h> | |
8f52a580 SR |
9 | #include <linux/string.h> |
10 | #include <linux/slab.h> | |
fa16a5c1 DB |
11 | #include <linux/init.h> |
12 | #include <linux/err.h> | |
13 | #include <linux/platform_device.h> | |
2098e95c RN |
14 | #include <linux/of.h> |
15 | #include <linux/of_device.h> | |
fa16a5c1 DB |
16 | #include <linux/regulator/driver.h> |
17 | #include <linux/regulator/machine.h> | |
2098e95c | 18 | #include <linux/regulator/of_regulator.h> |
a2054256 | 19 | #include <linux/mfd/twl.h> |
2330b05c | 20 | #include <linux/delay.h> |
fa16a5c1 DB |
21 | |
22 | /* | |
cac28ae6 | 23 | * The TWL4030/TW5030/TPS659x0 family chips include power management, a |
fa16a5c1 DB |
24 | * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions |
25 | * include an audio codec, battery charger, and more voltage regulators. | |
26 | * These chips are often used in OMAP-based systems. | |
27 | * | |
28 | * This driver implements software-based resource control for various | |
29 | * voltage regulators. This is usually augmented with state machine | |
30 | * based control. | |
31 | */ | |
32 | ||
33 | struct twlreg_info { | |
34 | /* start of regulator's PM_RECEIVER control register bank */ | |
35 | u8 base; | |
36 | ||
c4aa6f31 | 37 | /* twl resource ID, for resource control state machine */ |
fa16a5c1 DB |
38 | u8 id; |
39 | ||
40 | /* voltage in mV = table[VSEL]; table_len must be a power-of-two */ | |
41 | u8 table_len; | |
42 | const u16 *table; | |
43 | ||
045f972f JKS |
44 | /* State REMAP default configuration */ |
45 | u8 remap; | |
46 | ||
fa16a5c1 DB |
47 | /* used by regulator core */ |
48 | struct regulator_desc desc; | |
4d94aee5 GG |
49 | |
50 | /* chip specific features */ | |
3db39885 | 51 | unsigned long features; |
63bfff4e | 52 | |
63bfff4e TK |
53 | /* data passed from board for external get/set voltage */ |
54 | void *data; | |
fa16a5c1 DB |
55 | }; |
56 | ||
57 | ||
58 | /* LDO control registers ... offset is from the base of its register bank. | |
59 | * The first three registers of all power resource banks help hardware to | |
60 | * manage the various resource groups. | |
61 | */ | |
441a4505 | 62 | /* Common offset in TWL4030/6030 */ |
fa16a5c1 | 63 | #define VREG_GRP 0 |
441a4505 | 64 | /* TWL4030 register offsets */ |
fa16a5c1 DB |
65 | #define VREG_TYPE 1 |
66 | #define VREG_REMAP 2 | |
67 | #define VREG_DEDICATED 3 /* LDO control */ | |
ba305e31 | 68 | #define VREG_VOLTAGE_SMPS_4030 9 |
441a4505 RN |
69 | /* TWL6030 register offsets */ |
70 | #define VREG_TRANS 1 | |
71 | #define VREG_STATE 2 | |
72 | #define VREG_VOLTAGE 3 | |
4d94aee5 | 73 | #define VREG_VOLTAGE_SMPS 4 |
4d94aee5 | 74 | |
fa16a5c1 | 75 | static inline int |
441a4505 | 76 | twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) |
fa16a5c1 DB |
77 | { |
78 | u8 value; | |
79 | int status; | |
80 | ||
441a4505 | 81 | status = twl_i2c_read_u8(slave_subgp, |
fa16a5c1 DB |
82 | &value, info->base + offset); |
83 | return (status < 0) ? status : value; | |
84 | } | |
85 | ||
86 | static inline int | |
441a4505 RN |
87 | twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset, |
88 | u8 value) | |
fa16a5c1 | 89 | { |
441a4505 | 90 | return twl_i2c_write_u8(slave_subgp, |
fa16a5c1 DB |
91 | value, info->base + offset); |
92 | } | |
93 | ||
94 | /*----------------------------------------------------------------------*/ | |
95 | ||
96 | /* generic power resource operations, which work on all regulators */ | |
97 | ||
c4aa6f31 | 98 | static int twlreg_grp(struct regulator_dev *rdev) |
fa16a5c1 | 99 | { |
441a4505 RN |
100 | return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER, |
101 | VREG_GRP); | |
fa16a5c1 DB |
102 | } |
103 | ||
104 | /* | |
105 | * Enable/disable regulators by joining/leaving the P1 (processor) group. | |
106 | * We assume nobody else is updating the DEV_GRP registers. | |
107 | */ | |
441a4505 RN |
108 | /* definition for 4030 family */ |
109 | #define P3_GRP_4030 BIT(7) /* "peripherals" */ | |
110 | #define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */ | |
111 | #define P1_GRP_4030 BIT(5) /* CPU/Linux */ | |
112 | /* definition for 6030 family */ | |
113 | #define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */ | |
114 | #define P2_GRP_6030 BIT(1) /* "peripherals" */ | |
115 | #define P1_GRP_6030 BIT(0) /* CPU/Linux */ | |
fa16a5c1 | 116 | |
b2456779 | 117 | static int twl4030reg_is_enabled(struct regulator_dev *rdev) |
fa16a5c1 | 118 | { |
c4aa6f31 | 119 | int state = twlreg_grp(rdev); |
fa16a5c1 DB |
120 | |
121 | if (state < 0) | |
122 | return state; | |
123 | ||
b2456779 SH |
124 | return state & P1_GRP_4030; |
125 | } | |
126 | ||
2330b05c ID |
127 | #define PB_I2C_BUSY BIT(0) |
128 | #define PB_I2C_BWEN BIT(1) | |
129 | ||
130 | /* Wait until buffer empty/ready to send a word on power bus. */ | |
131 | static int twl4030_wait_pb_ready(void) | |
132 | { | |
133 | ||
134 | int ret; | |
135 | int timeout = 10; | |
136 | u8 val; | |
137 | ||
138 | do { | |
139 | ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, | |
140 | TWL4030_PM_MASTER_PB_CFG); | |
141 | if (ret < 0) | |
142 | return ret; | |
143 | ||
144 | if (!(val & PB_I2C_BUSY)) | |
145 | return 0; | |
146 | ||
147 | mdelay(1); | |
148 | timeout--; | |
149 | } while (timeout); | |
150 | ||
151 | return -ETIMEDOUT; | |
152 | } | |
153 | ||
154 | /* Send a word over the powerbus */ | |
155 | static int twl4030_send_pb_msg(unsigned msg) | |
156 | { | |
157 | u8 val; | |
158 | int ret; | |
159 | ||
160 | /* save powerbus configuration */ | |
161 | ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, | |
162 | TWL4030_PM_MASTER_PB_CFG); | |
163 | if (ret < 0) | |
164 | return ret; | |
165 | ||
166 | /* Enable i2c access to powerbus */ | |
167 | ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN, | |
168 | TWL4030_PM_MASTER_PB_CFG); | |
169 | if (ret < 0) | |
170 | return ret; | |
171 | ||
172 | ret = twl4030_wait_pb_ready(); | |
173 | if (ret < 0) | |
174 | return ret; | |
175 | ||
176 | ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8, | |
177 | TWL4030_PM_MASTER_PB_WORD_MSB); | |
178 | if (ret < 0) | |
179 | return ret; | |
180 | ||
181 | ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff, | |
182 | TWL4030_PM_MASTER_PB_WORD_LSB); | |
183 | if (ret < 0) | |
184 | return ret; | |
185 | ||
186 | ret = twl4030_wait_pb_ready(); | |
187 | if (ret < 0) | |
188 | return ret; | |
189 | ||
190 | /* Restore powerbus configuration */ | |
191 | return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val, | |
74d8b45f | 192 | TWL4030_PM_MASTER_PB_CFG); |
2330b05c ID |
193 | } |
194 | ||
f8c2940b | 195 | static int twl4030reg_enable(struct regulator_dev *rdev) |
fa16a5c1 DB |
196 | { |
197 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
198 | int grp; | |
53b8a9d9 | 199 | int ret; |
fa16a5c1 | 200 | |
b6f476c2 | 201 | grp = twlreg_grp(rdev); |
fa16a5c1 DB |
202 | if (grp < 0) |
203 | return grp; | |
204 | ||
f8c2940b | 205 | grp |= P1_GRP_4030; |
441a4505 | 206 | |
53b8a9d9 JKS |
207 | ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); |
208 | ||
f8c2940b B |
209 | return ret; |
210 | } | |
211 | ||
0ff3897d | 212 | static int twl4030reg_disable(struct regulator_dev *rdev) |
fa16a5c1 DB |
213 | { |
214 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
215 | int grp; | |
21657ebf | 216 | int ret; |
fa16a5c1 | 217 | |
b6f476c2 | 218 | grp = twlreg_grp(rdev); |
fa16a5c1 DB |
219 | if (grp < 0) |
220 | return grp; | |
221 | ||
0ff3897d | 222 | grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); |
441a4505 | 223 | |
21657ebf SH |
224 | ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); |
225 | ||
0ff3897d B |
226 | return ret; |
227 | } | |
228 | ||
9a0244ad | 229 | static int twl4030reg_get_status(struct regulator_dev *rdev) |
fa16a5c1 | 230 | { |
c4aa6f31 | 231 | int state = twlreg_grp(rdev); |
fa16a5c1 DB |
232 | |
233 | if (state < 0) | |
234 | return state; | |
235 | state &= 0x0f; | |
236 | ||
237 | /* assume state != WARM_RESET; we'd not be running... */ | |
238 | if (!state) | |
239 | return REGULATOR_STATUS_OFF; | |
240 | return (state & BIT(3)) | |
241 | ? REGULATOR_STATUS_NORMAL | |
242 | : REGULATOR_STATUS_STANDBY; | |
243 | } | |
244 | ||
1a39962f | 245 | static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) |
fa16a5c1 DB |
246 | { |
247 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
248 | unsigned message; | |
fa16a5c1 DB |
249 | |
250 | /* We can only set the mode through state machine commands... */ | |
251 | switch (mode) { | |
252 | case REGULATOR_MODE_NORMAL: | |
253 | message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE); | |
254 | break; | |
255 | case REGULATOR_MODE_STANDBY: | |
256 | message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP); | |
257 | break; | |
258 | default: | |
259 | return -EINVAL; | |
260 | } | |
261 | ||
2330b05c | 262 | return twl4030_send_pb_msg(message); |
fa16a5c1 DB |
263 | } |
264 | ||
a221f95e ID |
265 | static inline unsigned int twl4030reg_map_mode(unsigned int mode) |
266 | { | |
267 | switch (mode) { | |
268 | case RES_STATE_ACTIVE: | |
269 | return REGULATOR_MODE_NORMAL; | |
270 | case RES_STATE_SLEEP: | |
271 | return REGULATOR_MODE_STANDBY; | |
272 | default: | |
02f37039 | 273 | return REGULATOR_MODE_INVALID; |
a221f95e ID |
274 | } |
275 | } | |
276 | ||
fa16a5c1 DB |
277 | /*----------------------------------------------------------------------*/ |
278 | ||
279 | /* | |
280 | * Support for adjustable-voltage LDOs uses a four bit (or less) voltage | |
281 | * select field in its control register. We use tables indexed by VSEL | |
282 | * to record voltages in milliVolts. (Accuracy is about three percent.) | |
283 | * | |
284 | * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon; | |
285 | * currently handled by listing two slightly different VAUX2 regulators, | |
286 | * only one of which will be configured. | |
287 | * | |
288 | * VSEL values documented as "TI cannot support these values" are flagged | |
289 | * in these tables as UNSUP() values; we normally won't assign them. | |
d6bb69cf AH |
290 | * |
291 | * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported. | |
292 | * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting. | |
fa16a5c1 | 293 | */ |
fa16a5c1 | 294 | #define UNSUP_MASK 0x8000 |
fa16a5c1 DB |
295 | |
296 | #define UNSUP(x) (UNSUP_MASK | (x)) | |
411a2df5 N |
297 | #define IS_UNSUP(info, x) \ |
298 | ((UNSUP_MASK & (x)) && \ | |
299 | !((info)->features & TWL4030_ALLOW_UNSUPPORTED)) | |
fa16a5c1 DB |
300 | #define LDO_MV(x) (~UNSUP_MASK & (x)) |
301 | ||
302 | ||
303 | static const u16 VAUX1_VSEL_table[] = { | |
304 | UNSUP(1500), UNSUP(1800), 2500, 2800, | |
305 | 3000, 3000, 3000, 3000, | |
306 | }; | |
307 | static const u16 VAUX2_4030_VSEL_table[] = { | |
308 | UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300, | |
309 | 1500, 1800, UNSUP(1850), 2500, | |
310 | UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), | |
311 | UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), | |
312 | }; | |
313 | static const u16 VAUX2_VSEL_table[] = { | |
314 | 1700, 1700, 1900, 1300, | |
315 | 1500, 1800, 2000, 2500, | |
316 | 2100, 2800, 2200, 2300, | |
317 | 2400, 2400, 2400, 2400, | |
318 | }; | |
319 | static const u16 VAUX3_VSEL_table[] = { | |
320 | 1500, 1800, 2500, 2800, | |
d6bb69cf | 321 | 3000, 3000, 3000, 3000, |
fa16a5c1 DB |
322 | }; |
323 | static const u16 VAUX4_VSEL_table[] = { | |
324 | 700, 1000, 1200, UNSUP(1300), | |
325 | 1500, 1800, UNSUP(1850), 2500, | |
1897e742 DB |
326 | UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), |
327 | UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), | |
fa16a5c1 DB |
328 | }; |
329 | static const u16 VMMC1_VSEL_table[] = { | |
330 | 1850, 2850, 3000, 3150, | |
331 | }; | |
332 | static const u16 VMMC2_VSEL_table[] = { | |
333 | UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300), | |
334 | UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500), | |
335 | 2600, 2800, 2850, 3000, | |
336 | 3150, 3150, 3150, 3150, | |
337 | }; | |
338 | static const u16 VPLL1_VSEL_table[] = { | |
339 | 1000, 1200, 1300, 1800, | |
340 | UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000), | |
341 | }; | |
342 | static const u16 VPLL2_VSEL_table[] = { | |
343 | 700, 1000, 1200, 1300, | |
344 | UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500), | |
345 | UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000), | |
346 | UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), | |
347 | }; | |
348 | static const u16 VSIM_VSEL_table[] = { | |
349 | UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800, | |
350 | 2800, 3000, 3000, 3000, | |
351 | }; | |
352 | static const u16 VDAC_VSEL_table[] = { | |
353 | 1200, 1300, 1800, 1800, | |
354 | }; | |
07fc493f JKS |
355 | static const u16 VIO_VSEL_table[] = { |
356 | 1800, 1850, | |
357 | }; | |
358 | static const u16 VINTANA2_VSEL_table[] = { | |
359 | 2500, 2750, | |
360 | }; | |
fa16a5c1 | 361 | |
3829100a | 362 | /* 600mV to 1450mV in 12.5 mV steps */ |
60ab7f41 | 363 | static const struct linear_range VDD1_ranges[] = { |
3829100a AK |
364 | REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) |
365 | }; | |
366 | ||
367 | /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ | |
60ab7f41 | 368 | static const struct linear_range VDD2_ranges[] = { |
3829100a AK |
369 | REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), |
370 | REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) | |
371 | }; | |
372 | ||
3e3d3be7 | 373 | static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) |
66b659e6 DB |
374 | { |
375 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
376 | int mV = info->table[index]; | |
377 | ||
411a2df5 | 378 | return IS_UNSUP(info, mV) ? 0 : (LDO_MV(mV) * 1000); |
66b659e6 DB |
379 | } |
380 | ||
fa16a5c1 | 381 | static int |
dd16b1f8 | 382 | twl4030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) |
fa16a5c1 DB |
383 | { |
384 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
fa16a5c1 | 385 | |
dd16b1f8 AL |
386 | return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE, |
387 | selector); | |
fa16a5c1 DB |
388 | } |
389 | ||
6949fbe5 | 390 | static int twl4030ldo_get_voltage_sel(struct regulator_dev *rdev) |
fa16a5c1 DB |
391 | { |
392 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
6949fbe5 | 393 | int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE); |
fa16a5c1 DB |
394 | |
395 | if (vsel < 0) | |
396 | return vsel; | |
397 | ||
398 | vsel &= info->table_len - 1; | |
6949fbe5 | 399 | return vsel; |
fa16a5c1 DB |
400 | } |
401 | ||
401861f5 | 402 | static const struct regulator_ops twl4030ldo_ops = { |
3e3d3be7 | 403 | .list_voltage = twl4030ldo_list_voltage, |
66b659e6 | 404 | |
dd16b1f8 | 405 | .set_voltage_sel = twl4030ldo_set_voltage_sel, |
6949fbe5 | 406 | .get_voltage_sel = twl4030ldo_get_voltage_sel, |
3e3d3be7 | 407 | |
f8c2940b | 408 | .enable = twl4030reg_enable, |
0ff3897d | 409 | .disable = twl4030reg_disable, |
b2456779 | 410 | .is_enabled = twl4030reg_is_enabled, |
3e3d3be7 | 411 | |
1a39962f | 412 | .set_mode = twl4030reg_set_mode, |
3e3d3be7 | 413 | |
9a0244ad | 414 | .get_status = twl4030reg_get_status, |
3e3d3be7 RN |
415 | }; |
416 | ||
ba305e31 TK |
417 | static int |
418 | twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, | |
419 | unsigned *selector) | |
420 | { | |
421 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
422 | int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); | |
423 | ||
8313a4fb | 424 | twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, vsel); |
63bfff4e | 425 | |
ba305e31 TK |
426 | return 0; |
427 | } | |
428 | ||
429 | static int twl4030smps_get_voltage(struct regulator_dev *rdev) | |
430 | { | |
431 | struct twlreg_info *info = rdev_get_drvdata(rdev); | |
63bfff4e TK |
432 | int vsel; |
433 | ||
63bfff4e | 434 | vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, |
ba305e31 TK |
435 | VREG_VOLTAGE_SMPS_4030); |
436 | ||
437 | return vsel * 12500 + 600000; | |
438 | } | |
439 | ||
401861f5 | 440 | static const struct regulator_ops twl4030smps_ops = { |
3829100a AK |
441 | .list_voltage = regulator_list_voltage_linear_range, |
442 | ||
ba305e31 TK |
443 | .set_voltage = twl4030smps_set_voltage, |
444 | .get_voltage = twl4030smps_get_voltage, | |
445 | }; | |
446 | ||
fa16a5c1 DB |
447 | /*----------------------------------------------------------------------*/ |
448 | ||
401861f5 | 449 | static const struct regulator_ops twl4030fixed_ops = { |
b3816d50 | 450 | .list_voltage = regulator_list_voltage_linear, |
b2456779 | 451 | |
f8c2940b | 452 | .enable = twl4030reg_enable, |
0ff3897d | 453 | .disable = twl4030reg_disable, |
b2456779 SH |
454 | .is_enabled = twl4030reg_is_enabled, |
455 | ||
1a39962f | 456 | .set_mode = twl4030reg_set_mode, |
b2456779 | 457 | |
9a0244ad | 458 | .get_status = twl4030reg_get_status, |
b2456779 SH |
459 | }; |
460 | ||
fa16a5c1 DB |
461 | /*----------------------------------------------------------------------*/ |
462 | ||
2098e95c | 463 | #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ |
0ffff5a6 | 464 | static const struct twlreg_info TWL4030_INFO_##label = { \ |
fa16a5c1 DB |
465 | .base = offset, \ |
466 | .id = num, \ | |
467 | .table_len = ARRAY_SIZE(label##_VSEL_table), \ | |
468 | .table = label##_VSEL_table, \ | |
045f972f | 469 | .remap = remap_conf, \ |
fa16a5c1 DB |
470 | .desc = { \ |
471 | .name = #label, \ | |
3e3d3be7 | 472 | .id = TWL4030_REG_##label, \ |
66b659e6 | 473 | .n_voltages = ARRAY_SIZE(label##_VSEL_table), \ |
3e3d3be7 RN |
474 | .ops = &twl4030ldo_ops, \ |
475 | .type = REGULATOR_VOLTAGE, \ | |
476 | .owner = THIS_MODULE, \ | |
fca53d86 | 477 | .enable_time = turnon_delay, \ |
a221f95e | 478 | .of_map_mode = twl4030reg_map_mode, \ |
3e3d3be7 RN |
479 | }, \ |
480 | } | |
481 | ||
3829100a AK |
482 | #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \ |
483 | n_volt) \ | |
0ffff5a6 | 484 | static const struct twlreg_info TWL4030_INFO_##label = { \ |
ba305e31 TK |
485 | .base = offset, \ |
486 | .id = num, \ | |
ba305e31 TK |
487 | .remap = remap_conf, \ |
488 | .desc = { \ | |
489 | .name = #label, \ | |
490 | .id = TWL4030_REG_##label, \ | |
491 | .ops = &twl4030smps_ops, \ | |
492 | .type = REGULATOR_VOLTAGE, \ | |
493 | .owner = THIS_MODULE, \ | |
fca53d86 | 494 | .enable_time = turnon_delay, \ |
a221f95e | 495 | .of_map_mode = twl4030reg_map_mode, \ |
3829100a AK |
496 | .n_voltages = n_volt, \ |
497 | .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \ | |
498 | .linear_ranges = label ## _ranges, \ | |
ba305e31 TK |
499 | }, \ |
500 | } | |
501 | ||
dab780a3 NR |
502 | #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ |
503 | remap_conf) \ | |
0ffff5a6 | 504 | static const struct twlreg_info TWLFIXED_INFO_##label = { \ |
fa16a5c1 DB |
505 | .base = offset, \ |
506 | .id = num, \ | |
045f972f | 507 | .remap = remap_conf, \ |
fa16a5c1 DB |
508 | .desc = { \ |
509 | .name = #label, \ | |
dab780a3 | 510 | .id = TWL4030##_REG_##label, \ |
66b659e6 | 511 | .n_voltages = 1, \ |
dab780a3 | 512 | .ops = &twl4030fixed_ops, \ |
fa16a5c1 DB |
513 | .type = REGULATOR_VOLTAGE, \ |
514 | .owner = THIS_MODULE, \ | |
b3816d50 | 515 | .min_uV = mVolts * 1000, \ |
fca53d86 | 516 | .enable_time = turnon_delay, \ |
dab780a3 | 517 | .of_map_mode = twl4030reg_map_mode, \ |
8e6de4a3 B |
518 | }, \ |
519 | } | |
520 | ||
fa16a5c1 DB |
521 | /* |
522 | * We list regulators here if systems need some level of | |
523 | * software control over them after boot. | |
524 | */ | |
2098e95c RN |
525 | TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08); |
526 | TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08); | |
527 | TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08); | |
528 | TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08); | |
529 | TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08); | |
530 | TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08); | |
531 | TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08); | |
532 | TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00); | |
533 | TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08); | |
534 | TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00); | |
535 | TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08); | |
536 | TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08); | |
537 | TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08); | |
3829100a AK |
538 | TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68); |
539 | TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69); | |
2098e95c | 540 | /* VUSBCP is managed *only* by the USB subchip */ |
908d6d52 | 541 | TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); |
2098e95c RN |
542 | TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); |
543 | TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08); | |
544 | TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08); | |
545 | TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08); | |
4d94aee5 | 546 | |
2098e95c RN |
547 | #define TWL_OF_MATCH(comp, family, label) \ |
548 | { \ | |
549 | .compatible = comp, \ | |
550 | .data = &family##_INFO_##label, \ | |
551 | } | |
552 | ||
553 | #define TWL4030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL4030, label) | |
554 | #define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label) | |
89ce43fb | 555 | #define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label) |
2098e95c | 556 | #define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label) |
2098e95c RN |
557 | #define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label) |
558 | ||
3d68dfe3 | 559 | static const struct of_device_id twl_of_match[] = { |
2098e95c RN |
560 | TWL4030_OF_MATCH("ti,twl4030-vaux1", VAUX1), |
561 | TWL4030_OF_MATCH("ti,twl4030-vaux2", VAUX2_4030), | |
562 | TWL4030_OF_MATCH("ti,twl5030-vaux2", VAUX2), | |
563 | TWL4030_OF_MATCH("ti,twl4030-vaux3", VAUX3), | |
564 | TWL4030_OF_MATCH("ti,twl4030-vaux4", VAUX4), | |
565 | TWL4030_OF_MATCH("ti,twl4030-vmmc1", VMMC1), | |
566 | TWL4030_OF_MATCH("ti,twl4030-vmmc2", VMMC2), | |
567 | TWL4030_OF_MATCH("ti,twl4030-vpll1", VPLL1), | |
568 | TWL4030_OF_MATCH("ti,twl4030-vpll2", VPLL2), | |
569 | TWL4030_OF_MATCH("ti,twl4030-vsim", VSIM), | |
570 | TWL4030_OF_MATCH("ti,twl4030-vdac", VDAC), | |
571 | TWL4030_OF_MATCH("ti,twl4030-vintana2", VINTANA2), | |
572 | TWL4030_OF_MATCH("ti,twl4030-vio", VIO), | |
573 | TWL4030_OF_MATCH("ti,twl4030-vdd1", VDD1), | |
574 | TWL4030_OF_MATCH("ti,twl4030-vdd2", VDD2), | |
908d6d52 | 575 | TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1), |
2098e95c RN |
576 | TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG), |
577 | TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5), | |
578 | TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8), | |
579 | TWLFIXED_OF_MATCH("ti,twl4030-vusb3v1", VUSB3V1), | |
2098e95c RN |
580 | {}, |
581 | }; | |
582 | MODULE_DEVICE_TABLE(of, twl_of_match); | |
583 | ||
a5023574 | 584 | static int twlreg_probe(struct platform_device *pdev) |
fa16a5c1 | 585 | { |
8313a4fb | 586 | int id; |
fa16a5c1 | 587 | struct twlreg_info *info; |
0ffff5a6 | 588 | const struct twlreg_info *template; |
fa16a5c1 DB |
589 | struct regulator_init_data *initdata; |
590 | struct regulation_constraints *c; | |
591 | struct regulator_dev *rdev; | |
c172708d | 592 | struct regulator_config config = { }; |
2098e95c | 593 | |
93997a05 | 594 | template = of_device_get_match_data(&pdev->dev); |
0ffff5a6 | 595 | if (!template) |
fa16a5c1 DB |
596 | return -ENODEV; |
597 | ||
25d82337 NR |
598 | id = template->desc.id; |
599 | initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, | |
600 | &template->desc); | |
fa16a5c1 DB |
601 | if (!initdata) |
602 | return -EINVAL; | |
603 | ||
cd01e32d | 604 | info = devm_kmemdup(&pdev->dev, template, sizeof(*info), GFP_KERNEL); |
0ffff5a6 AB |
605 | if (!info) |
606 | return -ENOMEM; | |
607 | ||
fa16a5c1 DB |
608 | /* Constrain board-specific capabilities according to what |
609 | * this driver and the chip itself can actually do. | |
610 | */ | |
611 | c = &initdata->constraints; | |
fa16a5c1 DB |
612 | c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY; |
613 | c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE | |
614 | | REGULATOR_CHANGE_MODE | |
615 | | REGULATOR_CHANGE_STATUS; | |
2098e95c | 616 | switch (id) { |
205e5cd3 JKS |
617 | case TWL4030_REG_VIO: |
618 | case TWL4030_REG_VDD1: | |
619 | case TWL4030_REG_VDD2: | |
620 | case TWL4030_REG_VPLL1: | |
621 | case TWL4030_REG_VINTANA1: | |
622 | case TWL4030_REG_VINTANA2: | |
623 | case TWL4030_REG_VINTDIG: | |
624 | c->always_on = true; | |
625 | break; | |
626 | default: | |
627 | break; | |
628 | } | |
fa16a5c1 | 629 | |
c172708d MB |
630 | config.dev = &pdev->dev; |
631 | config.init_data = initdata; | |
632 | config.driver_data = info; | |
633 | config.of_node = pdev->dev.of_node; | |
634 | ||
00ce070e | 635 | rdev = devm_regulator_register(&pdev->dev, &info->desc, &config); |
fa16a5c1 DB |
636 | if (IS_ERR(rdev)) { |
637 | dev_err(&pdev->dev, "can't register %s, %ld\n", | |
638 | info->desc.name, PTR_ERR(rdev)); | |
639 | return PTR_ERR(rdev); | |
640 | } | |
641 | platform_set_drvdata(pdev, rdev); | |
642 | ||
cac28ae6 | 643 | twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, info->remap); |
30010fa5 | 644 | |
fa16a5c1 DB |
645 | /* NOTE: many regulators support short-circuit IRQs (presentable |
646 | * as REGULATOR_OVER_CURRENT notifications?) configured via: | |
647 | * - SC_CONFIG | |
648 | * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4) | |
649 | * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2) | |
650 | * - IT_CONFIG | |
651 | */ | |
652 | ||
653 | return 0; | |
654 | } | |
655 | ||
cac28ae6 | 656 | MODULE_ALIAS("platform:twl4030_reg"); |
fa16a5c1 | 657 | |
c4aa6f31 RN |
658 | static struct platform_driver twlreg_driver = { |
659 | .probe = twlreg_probe, | |
fa16a5c1 | 660 | /* NOTE: short name, to work around driver model truncation of |
c4aa6f31 | 661 | * "twl_regulator.12" (and friends) to "twl_regulator.1". |
fa16a5c1 | 662 | */ |
2098e95c | 663 | .driver = { |
cac28ae6 | 664 | .name = "twl4030_reg", |
2098e95c RN |
665 | .of_match_table = of_match_ptr(twl_of_match), |
666 | }, | |
fa16a5c1 DB |
667 | }; |
668 | ||
c4aa6f31 | 669 | static int __init twlreg_init(void) |
fa16a5c1 | 670 | { |
c4aa6f31 | 671 | return platform_driver_register(&twlreg_driver); |
fa16a5c1 | 672 | } |
c4aa6f31 | 673 | subsys_initcall(twlreg_init); |
fa16a5c1 | 674 | |
c4aa6f31 | 675 | static void __exit twlreg_exit(void) |
fa16a5c1 | 676 | { |
c4aa6f31 | 677 | platform_driver_unregister(&twlreg_driver); |
fa16a5c1 | 678 | } |
c4aa6f31 | 679 | module_exit(twlreg_exit) |
fa16a5c1 | 680 | |
cac28ae6 | 681 | MODULE_DESCRIPTION("TWL4030 regulator driver"); |
fa16a5c1 | 682 | MODULE_LICENSE("GPL"); |