]>
Commit | Line | Data |
---|---|---|
9a9a54ad AG |
1 | /* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. |
2 | * | |
3 | * This program is free software; you can redistribute it and/or modify | |
4 | * it under the terms of the GNU General Public License version 2 and | |
5 | * only version 2 as published by the Free Software Foundation. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | */ | |
12 | ||
13 | #include <linux/module.h> | |
14 | #include <linux/init.h> | |
15 | #include <linux/rtc.h> | |
16 | #include <linux/pm.h> | |
17 | #include <linux/slab.h> | |
18 | #include <linux/spinlock.h> | |
19 | ||
20 | #include <linux/mfd/pm8xxx/core.h> | |
21 | #include <linux/mfd/pm8xxx/rtc.h> | |
22 | ||
23 | ||
24 | /* RTC Register offsets from RTC CTRL REG */ | |
25 | #define PM8XXX_ALARM_CTRL_OFFSET 0x01 | |
26 | #define PM8XXX_RTC_WRITE_OFFSET 0x02 | |
27 | #define PM8XXX_RTC_READ_OFFSET 0x06 | |
28 | #define PM8XXX_ALARM_RW_OFFSET 0x0A | |
29 | ||
30 | /* RTC_CTRL register bit fields */ | |
31 | #define PM8xxx_RTC_ENABLE BIT(7) | |
32 | #define PM8xxx_RTC_ALARM_ENABLE BIT(1) | |
33 | #define PM8xxx_RTC_ALARM_CLEAR BIT(0) | |
34 | ||
35 | #define NUM_8_BIT_RTC_REGS 0x4 | |
36 | ||
37 | /** | |
38 | * struct pm8xxx_rtc - rtc driver internal structure | |
39 | * @rtc: rtc device for this driver. | |
40 | * @rtc_alarm_irq: rtc alarm irq number. | |
41 | * @rtc_base: address of rtc control register. | |
42 | * @rtc_read_base: base address of read registers. | |
43 | * @rtc_write_base: base address of write registers. | |
44 | * @alarm_rw_base: base address of alarm registers. | |
45 | * @ctrl_reg: rtc control register. | |
46 | * @rtc_dev: device structure. | |
47 | * @ctrl_reg_lock: spinlock protecting access to ctrl_reg. | |
48 | */ | |
49 | struct pm8xxx_rtc { | |
50 | struct rtc_device *rtc; | |
51 | int rtc_alarm_irq; | |
52 | int rtc_base; | |
53 | int rtc_read_base; | |
54 | int rtc_write_base; | |
55 | int alarm_rw_base; | |
56 | u8 ctrl_reg; | |
57 | struct device *rtc_dev; | |
58 | spinlock_t ctrl_reg_lock; | |
59 | }; | |
60 | ||
61 | /* | |
62 | * The RTC registers need to be read/written one byte at a time. This is a | |
63 | * hardware limitation. | |
64 | */ | |
65 | static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val, | |
66 | int base, int count) | |
67 | { | |
68 | int i, rc; | |
69 | struct device *parent = rtc_dd->rtc_dev->parent; | |
70 | ||
71 | for (i = 0; i < count; i++) { | |
72 | rc = pm8xxx_readb(parent, base + i, &rtc_val[i]); | |
73 | if (rc < 0) { | |
74 | dev_err(rtc_dd->rtc_dev, "PMIC read failed\n"); | |
75 | return rc; | |
76 | } | |
77 | } | |
78 | ||
79 | return 0; | |
80 | } | |
81 | ||
82 | static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val, | |
83 | int base, int count) | |
84 | { | |
85 | int i, rc; | |
86 | struct device *parent = rtc_dd->rtc_dev->parent; | |
87 | ||
88 | for (i = 0; i < count; i++) { | |
89 | rc = pm8xxx_writeb(parent, base + i, rtc_val[i]); | |
90 | if (rc < 0) { | |
91 | dev_err(rtc_dd->rtc_dev, "PMIC write failed\n"); | |
92 | return rc; | |
93 | } | |
94 | } | |
95 | ||
96 | return 0; | |
97 | } | |
98 | ||
99 | /* | |
100 | * Steps to write the RTC registers. | |
101 | * 1. Disable alarm if enabled. | |
102 | * 2. Write 0x00 to LSB. | |
103 | * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0]. | |
104 | * 4. Enable alarm if disabled in step 1. | |
105 | */ | |
106 | static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
107 | { | |
108 | int rc, i; | |
109 | unsigned long secs, irq_flags; | |
110 | u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg; | |
111 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
112 | ||
113 | rtc_tm_to_time(tm, &secs); | |
114 | ||
115 | for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) { | |
116 | value[i] = secs & 0xFF; | |
117 | secs >>= 8; | |
118 | } | |
119 | ||
120 | dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs); | |
121 | ||
122 | spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); | |
123 | ctrl_reg = rtc_dd->ctrl_reg; | |
124 | ||
125 | if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) { | |
126 | alarm_enabled = 1; | |
127 | ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE; | |
128 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, | |
129 | 1); | |
130 | if (rc < 0) { | |
131 | dev_err(dev, "Write to RTC control register " | |
132 | "failed\n"); | |
133 | goto rtc_rw_fail; | |
134 | } | |
135 | rtc_dd->ctrl_reg = ctrl_reg; | |
136 | } else | |
137 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
138 | ||
139 | /* Write 0 to Byte[0] */ | |
140 | reg = 0; | |
141 | rc = pm8xxx_write_wrapper(rtc_dd, ®, rtc_dd->rtc_write_base, 1); | |
142 | if (rc < 0) { | |
143 | dev_err(dev, "Write to RTC write data register failed\n"); | |
144 | goto rtc_rw_fail; | |
145 | } | |
146 | ||
147 | /* Write Byte[1], Byte[2], Byte[3] */ | |
148 | rc = pm8xxx_write_wrapper(rtc_dd, value + 1, | |
149 | rtc_dd->rtc_write_base + 1, 3); | |
150 | if (rc < 0) { | |
151 | dev_err(dev, "Write to RTC write data register failed\n"); | |
152 | goto rtc_rw_fail; | |
153 | } | |
154 | ||
155 | /* Write Byte[0] */ | |
156 | rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1); | |
157 | if (rc < 0) { | |
158 | dev_err(dev, "Write to RTC write data register failed\n"); | |
159 | goto rtc_rw_fail; | |
160 | } | |
161 | ||
162 | if (alarm_enabled) { | |
163 | ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE; | |
164 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, | |
165 | 1); | |
166 | if (rc < 0) { | |
167 | dev_err(dev, "Write to RTC control register " | |
168 | "failed\n"); | |
169 | goto rtc_rw_fail; | |
170 | } | |
171 | rtc_dd->ctrl_reg = ctrl_reg; | |
172 | } | |
173 | ||
174 | rtc_rw_fail: | |
175 | if (alarm_enabled) | |
176 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
177 | ||
178 | return rc; | |
179 | } | |
180 | ||
181 | static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
182 | { | |
183 | int rc; | |
184 | u8 value[NUM_8_BIT_RTC_REGS], reg; | |
185 | unsigned long secs; | |
186 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
187 | ||
188 | rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base, | |
189 | NUM_8_BIT_RTC_REGS); | |
190 | if (rc < 0) { | |
191 | dev_err(dev, "RTC read data register failed\n"); | |
192 | return rc; | |
193 | } | |
194 | ||
195 | /* | |
196 | * Read the LSB again and check if there has been a carry over. | |
197 | * If there is, redo the read operation. | |
198 | */ | |
199 | rc = pm8xxx_read_wrapper(rtc_dd, ®, rtc_dd->rtc_read_base, 1); | |
200 | if (rc < 0) { | |
201 | dev_err(dev, "RTC read data register failed\n"); | |
202 | return rc; | |
203 | } | |
204 | ||
205 | if (unlikely(reg < value[0])) { | |
206 | rc = pm8xxx_read_wrapper(rtc_dd, value, | |
207 | rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS); | |
208 | if (rc < 0) { | |
209 | dev_err(dev, "RTC read data register failed\n"); | |
210 | return rc; | |
211 | } | |
212 | } | |
213 | ||
214 | secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); | |
215 | ||
216 | rtc_time_to_tm(secs, tm); | |
217 | ||
218 | rc = rtc_valid_tm(tm); | |
219 | if (rc < 0) { | |
220 | dev_err(dev, "Invalid time read from RTC\n"); | |
221 | return rc; | |
222 | } | |
223 | ||
224 | dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n", | |
225 | secs, tm->tm_hour, tm->tm_min, tm->tm_sec, | |
226 | tm->tm_mday, tm->tm_mon, tm->tm_year); | |
227 | ||
228 | return 0; | |
229 | } | |
230 | ||
231 | static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) | |
232 | { | |
233 | int rc, i; | |
234 | u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg; | |
235 | unsigned long secs, irq_flags; | |
236 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
237 | ||
238 | rtc_tm_to_time(&alarm->time, &secs); | |
239 | ||
240 | for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) { | |
241 | value[i] = secs & 0xFF; | |
242 | secs >>= 8; | |
243 | } | |
244 | ||
245 | spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); | |
246 | ||
247 | rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base, | |
248 | NUM_8_BIT_RTC_REGS); | |
249 | if (rc < 0) { | |
250 | dev_err(dev, "Write to RTC ALARM register failed\n"); | |
251 | goto rtc_rw_fail; | |
252 | } | |
253 | ||
254 | ctrl_reg = rtc_dd->ctrl_reg; | |
255 | ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) : | |
256 | (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE); | |
257 | ||
258 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); | |
259 | if (rc < 0) { | |
260 | dev_err(dev, "Write to RTC control register failed\n"); | |
261 | goto rtc_rw_fail; | |
262 | } | |
263 | ||
264 | rtc_dd->ctrl_reg = ctrl_reg; | |
265 | ||
266 | dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n", | |
267 | alarm->time.tm_hour, alarm->time.tm_min, | |
268 | alarm->time.tm_sec, alarm->time.tm_mday, | |
269 | alarm->time.tm_mon, alarm->time.tm_year); | |
270 | rtc_rw_fail: | |
271 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
272 | return rc; | |
273 | } | |
274 | ||
275 | static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) | |
276 | { | |
277 | int rc; | |
278 | u8 value[NUM_8_BIT_RTC_REGS]; | |
279 | unsigned long secs; | |
280 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
281 | ||
282 | rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base, | |
283 | NUM_8_BIT_RTC_REGS); | |
284 | if (rc < 0) { | |
285 | dev_err(dev, "RTC alarm time read failed\n"); | |
286 | return rc; | |
287 | } | |
288 | ||
289 | secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); | |
290 | ||
291 | rtc_time_to_tm(secs, &alarm->time); | |
292 | ||
293 | rc = rtc_valid_tm(&alarm->time); | |
294 | if (rc < 0) { | |
295 | dev_err(dev, "Invalid alarm time read from RTC\n"); | |
296 | return rc; | |
297 | } | |
298 | ||
299 | dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n", | |
300 | alarm->time.tm_hour, alarm->time.tm_min, | |
301 | alarm->time.tm_sec, alarm->time.tm_mday, | |
302 | alarm->time.tm_mon, alarm->time.tm_year); | |
303 | ||
304 | return 0; | |
305 | } | |
306 | ||
307 | static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) | |
308 | { | |
309 | int rc; | |
310 | unsigned long irq_flags; | |
311 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
312 | u8 ctrl_reg; | |
313 | ||
314 | spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); | |
315 | ctrl_reg = rtc_dd->ctrl_reg; | |
316 | ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) : | |
317 | (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE); | |
318 | ||
319 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); | |
320 | if (rc < 0) { | |
321 | dev_err(dev, "Write to RTC control register failed\n"); | |
322 | goto rtc_rw_fail; | |
323 | } | |
324 | ||
325 | rtc_dd->ctrl_reg = ctrl_reg; | |
326 | ||
327 | rtc_rw_fail: | |
328 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
329 | return rc; | |
330 | } | |
331 | ||
332 | static struct rtc_class_ops pm8xxx_rtc_ops = { | |
333 | .read_time = pm8xxx_rtc_read_time, | |
334 | .set_alarm = pm8xxx_rtc_set_alarm, | |
335 | .read_alarm = pm8xxx_rtc_read_alarm, | |
336 | .alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable, | |
337 | }; | |
338 | ||
339 | static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id) | |
340 | { | |
341 | struct pm8xxx_rtc *rtc_dd = dev_id; | |
342 | u8 ctrl_reg; | |
343 | int rc; | |
344 | unsigned long irq_flags; | |
345 | ||
346 | rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF); | |
347 | ||
348 | spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); | |
349 | ||
350 | /* Clear the alarm enable bit */ | |
351 | ctrl_reg = rtc_dd->ctrl_reg; | |
352 | ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE; | |
353 | ||
354 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); | |
355 | if (rc < 0) { | |
356 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
357 | dev_err(rtc_dd->rtc_dev, "Write to RTC control register " | |
358 | "failed\n"); | |
359 | goto rtc_alarm_handled; | |
360 | } | |
361 | ||
362 | rtc_dd->ctrl_reg = ctrl_reg; | |
363 | spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); | |
364 | ||
365 | /* Clear RTC alarm register */ | |
366 | rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base + | |
367 | PM8XXX_ALARM_CTRL_OFFSET, 1); | |
368 | if (rc < 0) { | |
369 | dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read " | |
370 | "failed\n"); | |
371 | goto rtc_alarm_handled; | |
372 | } | |
373 | ||
374 | ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR; | |
375 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base + | |
376 | PM8XXX_ALARM_CTRL_OFFSET, 1); | |
377 | if (rc < 0) | |
378 | dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register" | |
379 | " failed\n"); | |
380 | ||
381 | rtc_alarm_handled: | |
382 | return IRQ_HANDLED; | |
383 | } | |
384 | ||
385 | static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev) | |
386 | { | |
387 | int rc; | |
388 | u8 ctrl_reg; | |
389 | bool rtc_write_enable = false; | |
390 | struct pm8xxx_rtc *rtc_dd; | |
391 | struct resource *rtc_resource; | |
392 | const struct pm8xxx_rtc_platform_data *pdata = | |
393 | dev_get_platdata(&pdev->dev); | |
394 | ||
395 | if (pdata != NULL) | |
396 | rtc_write_enable = pdata->rtc_write_enable; | |
397 | ||
398 | rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL); | |
399 | if (rtc_dd == NULL) { | |
400 | dev_err(&pdev->dev, "Unable to allocate memory!\n"); | |
401 | return -ENOMEM; | |
402 | } | |
403 | ||
404 | /* Initialise spinlock to protect RTC control register */ | |
405 | spin_lock_init(&rtc_dd->ctrl_reg_lock); | |
406 | ||
407 | rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0); | |
408 | if (rtc_dd->rtc_alarm_irq < 0) { | |
409 | dev_err(&pdev->dev, "Alarm IRQ resource absent!\n"); | |
410 | rc = -ENXIO; | |
411 | goto fail_rtc_enable; | |
412 | } | |
413 | ||
414 | rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO, | |
415 | "pmic_rtc_base"); | |
416 | if (!(rtc_resource && rtc_resource->start)) { | |
417 | dev_err(&pdev->dev, "RTC IO resource absent!\n"); | |
418 | rc = -ENXIO; | |
419 | goto fail_rtc_enable; | |
420 | } | |
421 | ||
422 | rtc_dd->rtc_base = rtc_resource->start; | |
423 | ||
424 | /* Setup RTC register addresses */ | |
425 | rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET; | |
426 | rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET; | |
427 | rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET; | |
428 | ||
429 | rtc_dd->rtc_dev = &pdev->dev; | |
430 | ||
431 | /* Check if the RTC is on, else turn it on */ | |
432 | rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); | |
433 | if (rc < 0) { | |
434 | dev_err(&pdev->dev, "RTC control register read failed!\n"); | |
435 | goto fail_rtc_enable; | |
436 | } | |
437 | ||
438 | if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) { | |
439 | ctrl_reg |= PM8xxx_RTC_ENABLE; | |
440 | rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, | |
441 | 1); | |
442 | if (rc < 0) { | |
443 | dev_err(&pdev->dev, "Write to RTC control register " | |
444 | "failed\n"); | |
445 | goto fail_rtc_enable; | |
446 | } | |
447 | } | |
448 | ||
449 | rtc_dd->ctrl_reg = ctrl_reg; | |
450 | if (rtc_write_enable == true) | |
451 | pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time; | |
452 | ||
453 | platform_set_drvdata(pdev, rtc_dd); | |
454 | ||
455 | /* Register the RTC device */ | |
456 | rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev, | |
457 | &pm8xxx_rtc_ops, THIS_MODULE); | |
458 | if (IS_ERR(rtc_dd->rtc)) { | |
459 | dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n", | |
460 | __func__, PTR_ERR(rtc_dd->rtc)); | |
461 | rc = PTR_ERR(rtc_dd->rtc); | |
462 | goto fail_rtc_enable; | |
463 | } | |
464 | ||
465 | /* Request the alarm IRQ */ | |
466 | rc = request_any_context_irq(rtc_dd->rtc_alarm_irq, | |
467 | pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING, | |
468 | "pm8xxx_rtc_alarm", rtc_dd); | |
469 | if (rc < 0) { | |
470 | dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc); | |
471 | goto fail_req_irq; | |
472 | } | |
473 | ||
474 | device_init_wakeup(&pdev->dev, 1); | |
475 | ||
476 | dev_dbg(&pdev->dev, "Probe success !!\n"); | |
477 | ||
478 | return 0; | |
479 | ||
480 | fail_req_irq: | |
481 | rtc_device_unregister(rtc_dd->rtc); | |
482 | fail_rtc_enable: | |
483 | platform_set_drvdata(pdev, NULL); | |
484 | kfree(rtc_dd); | |
485 | return rc; | |
486 | } | |
487 | ||
488 | static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev) | |
489 | { | |
490 | struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev); | |
491 | ||
492 | device_init_wakeup(&pdev->dev, 0); | |
493 | free_irq(rtc_dd->rtc_alarm_irq, rtc_dd); | |
494 | rtc_device_unregister(rtc_dd->rtc); | |
495 | platform_set_drvdata(pdev, NULL); | |
496 | kfree(rtc_dd); | |
497 | ||
498 | return 0; | |
499 | } | |
500 | ||
501 | #ifdef CONFIG_PM_SLEEP | |
502 | static int pm8xxx_rtc_resume(struct device *dev) | |
503 | { | |
504 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
505 | ||
506 | if (device_may_wakeup(dev)) | |
507 | disable_irq_wake(rtc_dd->rtc_alarm_irq); | |
508 | ||
509 | return 0; | |
510 | } | |
511 | ||
512 | static int pm8xxx_rtc_suspend(struct device *dev) | |
513 | { | |
514 | struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); | |
515 | ||
516 | if (device_may_wakeup(dev)) | |
517 | enable_irq_wake(rtc_dd->rtc_alarm_irq); | |
518 | ||
519 | return 0; | |
520 | } | |
521 | #endif | |
522 | ||
523 | SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume); | |
524 | ||
525 | static struct platform_driver pm8xxx_rtc_driver = { | |
526 | .probe = pm8xxx_rtc_probe, | |
527 | .remove = __devexit_p(pm8xxx_rtc_remove), | |
528 | .driver = { | |
529 | .name = PM8XXX_RTC_DEV_NAME, | |
530 | .owner = THIS_MODULE, | |
531 | .pm = &pm8xxx_rtc_pm_ops, | |
532 | }, | |
533 | }; | |
534 | ||
535 | static int __init pm8xxx_rtc_init(void) | |
536 | { | |
537 | return platform_driver_register(&pm8xxx_rtc_driver); | |
538 | } | |
539 | module_init(pm8xxx_rtc_init); | |
540 | ||
541 | static void __exit pm8xxx_rtc_exit(void) | |
542 | { | |
543 | platform_driver_unregister(&pm8xxx_rtc_driver); | |
544 | } | |
545 | module_exit(pm8xxx_rtc_exit); | |
546 | ||
547 | MODULE_ALIAS("platform:rtc-pm8xxx"); | |
548 | MODULE_DESCRIPTION("PMIC8xxx RTC driver"); | |
549 | MODULE_LICENSE("GPL v2"); | |
550 | MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>"); |