]>
Commit | Line | Data |
---|---|---|
1fec7c66 AZ |
1 | /* |
2 | * An i2c driver for the Xicor/Intersil X1205 RTC | |
3 | * Copyright 2004 Karen Spearel | |
4 | * Copyright 2005 Alessandro Zummo | |
5 | * | |
6 | * please send all reports to: | |
7 | * Karen Spearel <kas111 at gmail dot com> | |
8 | * Alessandro Zummo <a.zummo@towertech.it> | |
9 | * | |
10 | * based on a lot of other RTC drivers. | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | */ | |
16 | ||
17 | #include <linux/i2c.h> | |
18 | #include <linux/bcd.h> | |
19 | #include <linux/rtc.h> | |
20 | #include <linux/delay.h> | |
21 | ||
015aefbb | 22 | #define DRV_VERSION "1.0.7" |
1fec7c66 AZ |
23 | |
24 | /* Addresses to scan: none. This chip is located at | |
25 | * 0x6f and uses a two bytes register addressing. | |
26 | * Two bytes need to be written to read a single register, | |
27 | * while most other chips just require one and take the second | |
28 | * one as the data to be written. To prevent corrupting | |
29 | * unknown chips, the user must explicitely set the probe parameter. | |
30 | */ | |
31 | ||
32 | static unsigned short normal_i2c[] = { I2C_CLIENT_END }; | |
33 | ||
34 | /* Insmod parameters */ | |
35 | I2C_CLIENT_INSMOD; | |
36 | ||
37 | /* offsets into CCR area */ | |
38 | ||
39 | #define CCR_SEC 0 | |
40 | #define CCR_MIN 1 | |
41 | #define CCR_HOUR 2 | |
42 | #define CCR_MDAY 3 | |
43 | #define CCR_MONTH 4 | |
44 | #define CCR_YEAR 5 | |
45 | #define CCR_WDAY 6 | |
46 | #define CCR_Y2K 7 | |
47 | ||
48 | #define X1205_REG_SR 0x3F /* status register */ | |
49 | #define X1205_REG_Y2K 0x37 | |
50 | #define X1205_REG_DW 0x36 | |
51 | #define X1205_REG_YR 0x35 | |
52 | #define X1205_REG_MO 0x34 | |
53 | #define X1205_REG_DT 0x33 | |
54 | #define X1205_REG_HR 0x32 | |
55 | #define X1205_REG_MN 0x31 | |
56 | #define X1205_REG_SC 0x30 | |
57 | #define X1205_REG_DTR 0x13 | |
58 | #define X1205_REG_ATR 0x12 | |
59 | #define X1205_REG_INT 0x11 | |
60 | #define X1205_REG_0 0x10 | |
61 | #define X1205_REG_Y2K1 0x0F | |
62 | #define X1205_REG_DWA1 0x0E | |
63 | #define X1205_REG_YRA1 0x0D | |
64 | #define X1205_REG_MOA1 0x0C | |
65 | #define X1205_REG_DTA1 0x0B | |
66 | #define X1205_REG_HRA1 0x0A | |
67 | #define X1205_REG_MNA1 0x09 | |
68 | #define X1205_REG_SCA1 0x08 | |
69 | #define X1205_REG_Y2K0 0x07 | |
70 | #define X1205_REG_DWA0 0x06 | |
71 | #define X1205_REG_YRA0 0x05 | |
72 | #define X1205_REG_MOA0 0x04 | |
73 | #define X1205_REG_DTA0 0x03 | |
74 | #define X1205_REG_HRA0 0x02 | |
75 | #define X1205_REG_MNA0 0x01 | |
76 | #define X1205_REG_SCA0 0x00 | |
77 | ||
78 | #define X1205_CCR_BASE 0x30 /* Base address of CCR */ | |
79 | #define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ | |
80 | ||
81 | #define X1205_SR_RTCF 0x01 /* Clock failure */ | |
82 | #define X1205_SR_WEL 0x02 /* Write Enable Latch */ | |
83 | #define X1205_SR_RWEL 0x04 /* Register Write Enable */ | |
84 | ||
85 | #define X1205_DTR_DTR0 0x01 | |
86 | #define X1205_DTR_DTR1 0x02 | |
87 | #define X1205_DTR_DTR2 0x04 | |
88 | ||
89 | #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ | |
90 | ||
91 | /* Prototypes */ | |
92 | static int x1205_attach(struct i2c_adapter *adapter); | |
93 | static int x1205_detach(struct i2c_client *client); | |
94 | static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); | |
95 | ||
96 | static struct i2c_driver x1205_driver = { | |
97 | .driver = { | |
98 | .name = "x1205", | |
99 | }, | |
100 | .id = I2C_DRIVERID_X1205, | |
101 | .attach_adapter = &x1205_attach, | |
102 | .detach_client = &x1205_detach, | |
103 | }; | |
104 | ||
105 | /* | |
106 | * In the routines that deal directly with the x1205 hardware, we use | |
107 | * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch | |
108 | * Epoch is initialized as 2000. Time is set to UTC. | |
109 | */ | |
110 | static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, | |
111 | unsigned char reg_base) | |
112 | { | |
113 | unsigned char dt_addr[2] = { 0, reg_base }; | |
114 | ||
115 | unsigned char buf[8]; | |
116 | ||
117 | struct i2c_msg msgs[] = { | |
118 | { client->addr, 0, 2, dt_addr }, /* setup read ptr */ | |
119 | { client->addr, I2C_M_RD, 8, buf }, /* read date */ | |
120 | }; | |
121 | ||
122 | /* read date registers */ | |
123 | if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { | |
124 | dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | |
125 | return -EIO; | |
126 | } | |
127 | ||
128 | dev_dbg(&client->dev, | |
129 | "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " | |
130 | "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", | |
131 | __FUNCTION__, | |
132 | buf[0], buf[1], buf[2], buf[3], | |
133 | buf[4], buf[5], buf[6], buf[7]); | |
134 | ||
135 | tm->tm_sec = BCD2BIN(buf[CCR_SEC]); | |
136 | tm->tm_min = BCD2BIN(buf[CCR_MIN]); | |
137 | tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ | |
138 | tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); | |
139 | tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */ | |
140 | tm->tm_year = BCD2BIN(buf[CCR_YEAR]) | |
141 | + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900; | |
142 | tm->tm_wday = buf[CCR_WDAY]; | |
143 | ||
144 | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " | |
145 | "mday=%d, mon=%d, year=%d, wday=%d\n", | |
146 | __FUNCTION__, | |
147 | tm->tm_sec, tm->tm_min, tm->tm_hour, | |
148 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | |
149 | ||
150 | return 0; | |
151 | } | |
152 | ||
153 | static int x1205_get_status(struct i2c_client *client, unsigned char *sr) | |
154 | { | |
155 | static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; | |
156 | ||
157 | struct i2c_msg msgs[] = { | |
158 | { client->addr, 0, 2, sr_addr }, /* setup read ptr */ | |
159 | { client->addr, I2C_M_RD, 1, sr }, /* read status */ | |
160 | }; | |
161 | ||
162 | /* read status register */ | |
163 | if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { | |
164 | dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | |
165 | return -EIO; | |
166 | } | |
167 | ||
168 | return 0; | |
169 | } | |
170 | ||
171 | static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, | |
172 | int datetoo, u8 reg_base) | |
173 | { | |
174 | int i, xfer; | |
175 | unsigned char buf[8]; | |
176 | ||
177 | static const unsigned char wel[3] = { 0, X1205_REG_SR, | |
178 | X1205_SR_WEL }; | |
179 | ||
180 | static const unsigned char rwel[3] = { 0, X1205_REG_SR, | |
181 | X1205_SR_WEL | X1205_SR_RWEL }; | |
182 | ||
183 | static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; | |
184 | ||
185 | dev_dbg(&client->dev, | |
186 | "%s: secs=%d, mins=%d, hours=%d\n", | |
187 | __FUNCTION__, | |
188 | tm->tm_sec, tm->tm_min, tm->tm_hour); | |
189 | ||
190 | buf[CCR_SEC] = BIN2BCD(tm->tm_sec); | |
191 | buf[CCR_MIN] = BIN2BCD(tm->tm_min); | |
192 | ||
193 | /* set hour and 24hr bit */ | |
194 | buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; | |
195 | ||
196 | /* should we also set the date? */ | |
197 | if (datetoo) { | |
198 | dev_dbg(&client->dev, | |
199 | "%s: mday=%d, mon=%d, year=%d, wday=%d\n", | |
200 | __FUNCTION__, | |
201 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | |
202 | ||
203 | buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); | |
204 | ||
205 | /* month, 1 - 12 */ | |
206 | buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1); | |
207 | ||
208 | /* year, since the rtc epoch*/ | |
209 | buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100); | |
210 | buf[CCR_WDAY] = tm->tm_wday & 0x07; | |
211 | buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); | |
212 | } | |
213 | ||
214 | /* this sequence is required to unlock the chip */ | |
215 | if ((xfer = i2c_master_send(client, wel, 3)) != 3) { | |
216 | dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); | |
217 | return -EIO; | |
218 | } | |
219 | ||
220 | if ((xfer = i2c_master_send(client, rwel, 3)) != 3) { | |
221 | dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); | |
222 | return -EIO; | |
223 | } | |
224 | ||
225 | /* write register's data */ | |
226 | for (i = 0; i < (datetoo ? 8 : 3); i++) { | |
227 | unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; | |
228 | ||
229 | xfer = i2c_master_send(client, rdata, 3); | |
230 | if (xfer != 3) { | |
231 | dev_err(&client->dev, | |
232 | "%s: xfer=%d addr=%02x, data=%02x\n", | |
233 | __FUNCTION__, | |
234 | xfer, rdata[1], rdata[2]); | |
235 | return -EIO; | |
236 | } | |
237 | }; | |
238 | ||
239 | /* disable further writes */ | |
240 | if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { | |
241 | dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); | |
242 | return -EIO; | |
243 | } | |
244 | ||
245 | return 0; | |
246 | } | |
247 | ||
248 | static int x1205_fix_osc(struct i2c_client *client) | |
249 | { | |
250 | int err; | |
251 | struct rtc_time tm; | |
252 | ||
253 | tm.tm_hour = tm.tm_min = tm.tm_sec = 0; | |
254 | ||
255 | if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) | |
256 | dev_err(&client->dev, | |
257 | "unable to restart the oscillator\n"); | |
258 | ||
259 | return err; | |
260 | } | |
261 | ||
262 | static int x1205_get_dtrim(struct i2c_client *client, int *trim) | |
263 | { | |
264 | unsigned char dtr; | |
265 | static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; | |
266 | ||
267 | struct i2c_msg msgs[] = { | |
268 | { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ | |
269 | { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ | |
270 | }; | |
271 | ||
272 | /* read dtr register */ | |
273 | if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { | |
274 | dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | |
275 | return -EIO; | |
276 | } | |
277 | ||
278 | dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); | |
279 | ||
280 | *trim = 0; | |
281 | ||
282 | if (dtr & X1205_DTR_DTR0) | |
283 | *trim += 20; | |
284 | ||
285 | if (dtr & X1205_DTR_DTR1) | |
286 | *trim += 10; | |
287 | ||
288 | if (dtr & X1205_DTR_DTR2) | |
289 | *trim = -*trim; | |
290 | ||
291 | return 0; | |
292 | } | |
293 | ||
294 | static int x1205_get_atrim(struct i2c_client *client, int *trim) | |
295 | { | |
296 | s8 atr; | |
297 | static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; | |
298 | ||
299 | struct i2c_msg msgs[] = { | |
300 | { client->addr, 0, 2, atr_addr }, /* setup read ptr */ | |
301 | { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ | |
302 | }; | |
303 | ||
304 | /* read atr register */ | |
305 | if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { | |
306 | dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | |
307 | return -EIO; | |
308 | } | |
309 | ||
310 | dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); | |
311 | ||
312 | /* atr is a two's complement value on 6 bits, | |
313 | * perform sign extension. The formula is | |
314 | * Catr = (atr * 0.25pF) + 11.00pF. | |
315 | */ | |
316 | if (atr & 0x20) | |
317 | atr |= 0xC0; | |
318 | ||
319 | dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); | |
320 | ||
321 | *trim = (atr * 250) + 11000; | |
322 | ||
323 | dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); | |
324 | ||
325 | return 0; | |
326 | } | |
327 | ||
328 | struct x1205_limit | |
329 | { | |
330 | unsigned char reg, mask, min, max; | |
331 | }; | |
332 | ||
333 | static int x1205_validate_client(struct i2c_client *client) | |
334 | { | |
335 | int i, xfer; | |
336 | ||
337 | /* Probe array. We will read the register at the specified | |
338 | * address and check if the given bits are zero. | |
339 | */ | |
340 | static const unsigned char probe_zero_pattern[] = { | |
341 | /* register, mask */ | |
342 | X1205_REG_SR, 0x18, | |
343 | X1205_REG_DTR, 0xF8, | |
344 | X1205_REG_ATR, 0xC0, | |
345 | X1205_REG_INT, 0x18, | |
346 | X1205_REG_0, 0xFF, | |
347 | }; | |
348 | ||
349 | static const struct x1205_limit probe_limits_pattern[] = { | |
350 | /* register, mask, min, max */ | |
351 | { X1205_REG_Y2K, 0xFF, 19, 20 }, | |
352 | { X1205_REG_DW, 0xFF, 0, 6 }, | |
353 | { X1205_REG_YR, 0xFF, 0, 99 }, | |
354 | { X1205_REG_MO, 0xFF, 0, 12 }, | |
355 | { X1205_REG_DT, 0xFF, 0, 31 }, | |
356 | { X1205_REG_HR, 0x7F, 0, 23 }, | |
357 | { X1205_REG_MN, 0xFF, 0, 59 }, | |
358 | { X1205_REG_SC, 0xFF, 0, 59 }, | |
359 | { X1205_REG_Y2K1, 0xFF, 19, 20 }, | |
360 | { X1205_REG_Y2K0, 0xFF, 19, 20 }, | |
361 | }; | |
362 | ||
363 | /* check that registers have bits a 0 where expected */ | |
364 | for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { | |
365 | unsigned char buf; | |
366 | ||
367 | unsigned char addr[2] = { 0, probe_zero_pattern[i] }; | |
368 | ||
369 | struct i2c_msg msgs[2] = { | |
370 | { client->addr, 0, 2, addr }, | |
371 | { client->addr, I2C_M_RD, 1, &buf }, | |
372 | }; | |
373 | ||
374 | if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) { | |
375 | dev_err(&client->adapter->dev, | |
376 | "%s: could not read register %x\n", | |
377 | __FUNCTION__, probe_zero_pattern[i]); | |
378 | ||
379 | return -EIO; | |
380 | } | |
381 | ||
382 | if ((buf & probe_zero_pattern[i+1]) != 0) { | |
383 | dev_err(&client->adapter->dev, | |
384 | "%s: register=%02x, zero pattern=%d, value=%x\n", | |
385 | __FUNCTION__, probe_zero_pattern[i], i, buf); | |
386 | ||
387 | return -ENODEV; | |
388 | } | |
389 | } | |
390 | ||
391 | /* check limits (only registers with bcd values) */ | |
392 | for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { | |
393 | unsigned char reg, value; | |
394 | ||
395 | unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; | |
396 | ||
397 | struct i2c_msg msgs[2] = { | |
398 | { client->addr, 0, 2, addr }, | |
399 | { client->addr, I2C_M_RD, 1, ® }, | |
400 | }; | |
401 | ||
402 | if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) { | |
403 | dev_err(&client->adapter->dev, | |
404 | "%s: could not read register %x\n", | |
405 | __FUNCTION__, probe_limits_pattern[i].reg); | |
406 | ||
407 | return -EIO; | |
408 | } | |
409 | ||
410 | value = BCD2BIN(reg & probe_limits_pattern[i].mask); | |
411 | ||
412 | if (value > probe_limits_pattern[i].max || | |
413 | value < probe_limits_pattern[i].min) { | |
414 | dev_dbg(&client->adapter->dev, | |
415 | "%s: register=%x, lim pattern=%d, value=%d\n", | |
416 | __FUNCTION__, probe_limits_pattern[i].reg, | |
417 | i, value); | |
418 | ||
419 | return -ENODEV; | |
420 | } | |
421 | } | |
422 | ||
423 | return 0; | |
424 | } | |
425 | ||
426 | static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
427 | { | |
428 | return x1205_get_datetime(to_i2c_client(dev), | |
429 | &alrm->time, X1205_ALM0_BASE); | |
430 | } | |
431 | ||
432 | static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
433 | { | |
434 | return x1205_set_datetime(to_i2c_client(dev), | |
435 | &alrm->time, 1, X1205_ALM0_BASE); | |
436 | } | |
437 | ||
438 | static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
439 | { | |
440 | return x1205_get_datetime(to_i2c_client(dev), | |
441 | tm, X1205_CCR_BASE); | |
442 | } | |
443 | ||
444 | static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
445 | { | |
446 | return x1205_set_datetime(to_i2c_client(dev), | |
447 | tm, 1, X1205_CCR_BASE); | |
448 | } | |
449 | ||
450 | static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) | |
451 | { | |
452 | int err, dtrim, atrim; | |
453 | ||
1fec7c66 AZ |
454 | if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0) |
455 | seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim); | |
456 | ||
457 | if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0) | |
458 | seq_printf(seq, "analog_trim\t: %d.%02d pF\n", | |
459 | atrim / 1000, atrim % 1000); | |
460 | return 0; | |
461 | } | |
462 | ||
ff8371ac | 463 | static const struct rtc_class_ops x1205_rtc_ops = { |
1fec7c66 AZ |
464 | .proc = x1205_rtc_proc, |
465 | .read_time = x1205_rtc_read_time, | |
466 | .set_time = x1205_rtc_set_time, | |
467 | .read_alarm = x1205_rtc_read_alarm, | |
468 | .set_alarm = x1205_rtc_set_alarm, | |
469 | }; | |
470 | ||
471 | static ssize_t x1205_sysfs_show_atrim(struct device *dev, | |
472 | struct device_attribute *attr, char *buf) | |
473 | { | |
015aefbb | 474 | int err, atrim; |
1fec7c66 | 475 | |
015aefbb AZ |
476 | err = x1205_get_atrim(to_i2c_client(dev), &atrim); |
477 | if (err) | |
478 | return err; | |
479 | ||
480 | return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000); | |
1fec7c66 AZ |
481 | } |
482 | static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL); | |
483 | ||
484 | static ssize_t x1205_sysfs_show_dtrim(struct device *dev, | |
485 | struct device_attribute *attr, char *buf) | |
486 | { | |
015aefbb | 487 | int err, dtrim; |
1fec7c66 | 488 | |
015aefbb AZ |
489 | err = x1205_get_dtrim(to_i2c_client(dev), &dtrim); |
490 | if (err) | |
491 | return err; | |
1fec7c66 | 492 | |
015aefbb | 493 | return sprintf(buf, "%d ppm\n", dtrim); |
1fec7c66 AZ |
494 | } |
495 | static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL); | |
496 | ||
497 | static int x1205_attach(struct i2c_adapter *adapter) | |
498 | { | |
1fec7c66 AZ |
499 | return i2c_probe(adapter, &addr_data, x1205_probe); |
500 | } | |
501 | ||
502 | static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) | |
503 | { | |
504 | int err = 0; | |
505 | unsigned char sr; | |
506 | struct i2c_client *client; | |
507 | struct rtc_device *rtc; | |
508 | ||
509 | dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); | |
510 | ||
511 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { | |
512 | err = -ENODEV; | |
513 | goto exit; | |
514 | } | |
515 | ||
516 | if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { | |
517 | err = -ENOMEM; | |
518 | goto exit; | |
519 | } | |
520 | ||
521 | /* I2C client */ | |
522 | client->addr = address; | |
523 | client->driver = &x1205_driver; | |
524 | client->adapter = adapter; | |
525 | ||
526 | strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE); | |
527 | ||
528 | /* Verify the chip is really an X1205 */ | |
529 | if (kind < 0) { | |
530 | if (x1205_validate_client(client) < 0) { | |
531 | err = -ENODEV; | |
532 | goto exit_kfree; | |
533 | } | |
534 | } | |
535 | ||
536 | /* Inform the i2c layer */ | |
537 | if ((err = i2c_attach_client(client))) | |
538 | goto exit_kfree; | |
539 | ||
540 | dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); | |
541 | ||
542 | rtc = rtc_device_register(x1205_driver.driver.name, &client->dev, | |
543 | &x1205_rtc_ops, THIS_MODULE); | |
544 | ||
545 | if (IS_ERR(rtc)) { | |
546 | err = PTR_ERR(rtc); | |
1fec7c66 AZ |
547 | goto exit_detach; |
548 | } | |
549 | ||
550 | i2c_set_clientdata(client, rtc); | |
551 | ||
552 | /* Check for power failures and eventualy enable the osc */ | |
553 | if ((err = x1205_get_status(client, &sr)) == 0) { | |
554 | if (sr & X1205_SR_RTCF) { | |
555 | dev_err(&client->dev, | |
556 | "power failure detected, " | |
557 | "please set the clock\n"); | |
558 | udelay(50); | |
559 | x1205_fix_osc(client); | |
560 | } | |
561 | } | |
562 | else | |
563 | dev_err(&client->dev, "couldn't read status\n"); | |
564 | ||
565 | device_create_file(&client->dev, &dev_attr_atrim); | |
566 | device_create_file(&client->dev, &dev_attr_dtrim); | |
567 | ||
568 | return 0; | |
569 | ||
570 | exit_detach: | |
571 | i2c_detach_client(client); | |
572 | ||
573 | exit_kfree: | |
574 | kfree(client); | |
575 | ||
576 | exit: | |
577 | return err; | |
578 | } | |
579 | ||
580 | static int x1205_detach(struct i2c_client *client) | |
581 | { | |
582 | int err; | |
583 | struct rtc_device *rtc = i2c_get_clientdata(client); | |
584 | ||
1fec7c66 AZ |
585 | if (rtc) |
586 | rtc_device_unregister(rtc); | |
587 | ||
588 | if ((err = i2c_detach_client(client))) | |
589 | return err; | |
590 | ||
591 | kfree(client); | |
592 | ||
593 | return 0; | |
594 | } | |
595 | ||
596 | static int __init x1205_init(void) | |
597 | { | |
598 | return i2c_add_driver(&x1205_driver); | |
599 | } | |
600 | ||
601 | static void __exit x1205_exit(void) | |
602 | { | |
603 | i2c_del_driver(&x1205_driver); | |
604 | } | |
605 | ||
606 | MODULE_AUTHOR( | |
607 | "Karen Spearel <kas111 at gmail dot com>, " | |
608 | "Alessandro Zummo <a.zummo@towertech.it>"); | |
609 | MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver"); | |
610 | MODULE_LICENSE("GPL"); | |
611 | MODULE_VERSION(DRV_VERSION); | |
612 | ||
613 | module_init(x1205_init); | |
614 | module_exit(x1205_exit); |