]>
Commit | Line | Data |
---|---|---|
58751759 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
1da177e4 LT |
2 | |
3 | /* | |
4 | ||
5 | Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters | |
6 | ||
7 | Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> | |
8 | ||
1da177e4 LT |
9 | |
10 | The author respectfully requests that any modifications to this software be | |
11 | sent directly to him for evaluation and testing. | |
12 | ||
13 | Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose | |
14 | advice has been invaluable, to David Gentzel, for writing the original Linux | |
15 | BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. | |
16 | ||
17 | Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB | |
18 | Manager available as freely redistributable source code. | |
19 | ||
20 | */ | |
21 | ||
eeceec90 KA |
22 | #define blogic_drvr_version "2.1.17" |
23 | #define blogic_drvr_date "12 September 2013" | |
1da177e4 | 24 | |
1da177e4 LT |
25 | #include <linux/module.h> |
26 | #include <linux/init.h> | |
27 | #include <linux/interrupt.h> | |
28 | #include <linux/types.h> | |
29 | #include <linux/blkdev.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/ioport.h> | |
32 | #include <linux/mm.h> | |
33 | #include <linux/stat.h> | |
34 | #include <linux/pci.h> | |
35 | #include <linux/spinlock.h> | |
60c904ae | 36 | #include <linux/jiffies.h> |
910638ae | 37 | #include <linux/dma-mapping.h> |
5a0e3ad6 | 38 | #include <linux/slab.h> |
1da177e4 LT |
39 | #include <scsi/scsicam.h> |
40 | ||
41 | #include <asm/dma.h> | |
42 | #include <asm/io.h> | |
1da177e4 LT |
43 | |
44 | #include <scsi/scsi.h> | |
45 | #include <scsi/scsi_cmnd.h> | |
46 | #include <scsi/scsi_device.h> | |
47 | #include <scsi/scsi_host.h> | |
48 | #include <scsi/scsi_tcq.h> | |
49 | #include "BusLogic.h" | |
50 | #include "FlashPoint.c" | |
51 | ||
52 | #ifndef FAILURE | |
53 | #define FAILURE (-1) | |
54 | #endif | |
55 | ||
839cb99e | 56 | static struct scsi_host_template blogic_template; |
1da177e4 LT |
57 | |
58 | /* | |
839cb99e | 59 | blogic_drvr_options_count is a count of the number of BusLogic Driver |
1da177e4 LT |
60 | Options specifications provided via the Linux Kernel Command Line or via |
61 | the Loadable Kernel Module Installation Facility. | |
62 | */ | |
63 | ||
839cb99e | 64 | static int blogic_drvr_options_count; |
1da177e4 LT |
65 | |
66 | ||
67 | /* | |
839cb99e | 68 | blogic_drvr_options is an array of Driver Options structures representing |
1da177e4 LT |
69 | BusLogic Driver Options specifications provided via the Linux Kernel Command |
70 | Line or via the Loadable Kernel Module Installation Facility. | |
71 | */ | |
72 | ||
839cb99e | 73 | static struct blogic_drvr_options blogic_drvr_options[BLOGIC_MAX_ADAPTERS]; |
1da177e4 LT |
74 | |
75 | ||
76 | /* | |
77 | BusLogic can be assigned a string by insmod. | |
78 | */ | |
79 | ||
80 | MODULE_LICENSE("GPL"); | |
81 | #ifdef MODULE | |
82 | static char *BusLogic; | |
83 | module_param(BusLogic, charp, 0); | |
84 | #endif | |
85 | ||
86 | ||
87 | /* | |
839cb99e | 88 | blogic_probe_options is a set of Probe Options to be applied across |
1da177e4 LT |
89 | all BusLogic Host Adapters. |
90 | */ | |
91 | ||
839cb99e | 92 | static struct blogic_probe_options blogic_probe_options; |
1da177e4 LT |
93 | |
94 | ||
95 | /* | |
839cb99e | 96 | blogic_global_options is a set of Global Options to be applied across |
1da177e4 LT |
97 | all BusLogic Host Adapters. |
98 | */ | |
99 | ||
839cb99e | 100 | static struct blogic_global_options blogic_global_options; |
1da177e4 | 101 | |
839cb99e | 102 | static LIST_HEAD(blogic_host_list); |
1da177e4 LT |
103 | |
104 | /* | |
839cb99e | 105 | blogic_probeinfo_count is the number of entries in blogic_probeinfo_list. |
1da177e4 LT |
106 | */ |
107 | ||
839cb99e | 108 | static int blogic_probeinfo_count; |
1da177e4 LT |
109 | |
110 | ||
111 | /* | |
839cb99e | 112 | blogic_probeinfo_list is the list of I/O Addresses and Bus Probe Information |
1da177e4 LT |
113 | to be checked for potential BusLogic Host Adapters. It is initialized by |
114 | interrogating the PCI Configuration Space on PCI machines as well as from the | |
115 | list of standard BusLogic I/O Addresses. | |
116 | */ | |
117 | ||
839cb99e | 118 | static struct blogic_probeinfo *blogic_probeinfo_list; |
1da177e4 LT |
119 | |
120 | ||
121 | /* | |
839cb99e KA |
122 | blogic_cmd_failure_reason holds a string identifying the reason why a |
123 | call to blogic_cmd failed. It is only non-NULL when blogic_cmd | |
1da177e4 LT |
124 | returns a failure code. |
125 | */ | |
126 | ||
839cb99e | 127 | static char *blogic_cmd_failure_reason; |
1da177e4 LT |
128 | |
129 | /* | |
839cb99e | 130 | blogic_announce_drvr announces the Driver Version and Date, Author's |
1da177e4 LT |
131 | Name, Copyright Notice, and Electronic Mail Address. |
132 | */ | |
133 | ||
839cb99e | 134 | static void blogic_announce_drvr(struct blogic_adapter *adapter) |
1da177e4 | 135 | { |
839cb99e KA |
136 | blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter); |
137 | blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", adapter); | |
1da177e4 LT |
138 | } |
139 | ||
140 | ||
141 | /* | |
839cb99e | 142 | blogic_drvr_info returns the Host Adapter Name to identify this SCSI |
1da177e4 LT |
143 | Driver and Host Adapter. |
144 | */ | |
145 | ||
839cb99e | 146 | static const char *blogic_drvr_info(struct Scsi_Host *host) |
1da177e4 | 147 | { |
839cb99e KA |
148 | struct blogic_adapter *adapter = |
149 | (struct blogic_adapter *) host->hostdata; | |
150 | return adapter->full_model; | |
1da177e4 LT |
151 | } |
152 | ||
153 | /* | |
839cb99e KA |
154 | blogic_init_ccbs initializes a group of Command Control Blocks (CCBs) |
155 | for Host Adapter from the blk_size bytes located at blk_pointer. The newly | |
1da177e4 LT |
156 | created CCBs are added to Host Adapter's free list. |
157 | */ | |
158 | ||
839cb99e KA |
159 | static void blogic_init_ccbs(struct blogic_adapter *adapter, void *blk_pointer, |
160 | int blk_size, dma_addr_t blkp) | |
1da177e4 | 161 | { |
839cb99e | 162 | struct blogic_ccb *ccb = (struct blogic_ccb *) blk_pointer; |
1da177e4 | 163 | unsigned int offset = 0; |
839cb99e KA |
164 | memset(blk_pointer, 0, blk_size); |
165 | ccb->allocgrp_head = blkp; | |
166 | ccb->allocgrp_size = blk_size; | |
167 | while ((blk_size -= sizeof(struct blogic_ccb)) >= 0) { | |
168 | ccb->status = BLOGIC_CCB_FREE; | |
169 | ccb->adapter = adapter; | |
170 | ccb->dma_handle = (u32) blkp + offset; | |
171 | if (blogic_flashpoint_type(adapter)) { | |
172 | ccb->callback = blogic_qcompleted_ccb; | |
173 | ccb->base_addr = adapter->fpinfo.base_addr; | |
1da177e4 | 174 | } |
839cb99e KA |
175 | ccb->next = adapter->free_ccbs; |
176 | ccb->next_all = adapter->all_ccbs; | |
177 | adapter->free_ccbs = ccb; | |
178 | adapter->all_ccbs = ccb; | |
179 | adapter->alloc_ccbs++; | |
180 | ccb++; | |
181 | offset += sizeof(struct blogic_ccb); | |
1da177e4 LT |
182 | } |
183 | } | |
184 | ||
185 | ||
186 | /* | |
839cb99e | 187 | blogic_create_initccbs allocates the initial CCBs for Host Adapter. |
1da177e4 LT |
188 | */ |
189 | ||
839cb99e | 190 | static bool __init blogic_create_initccbs(struct blogic_adapter *adapter) |
1da177e4 | 191 | { |
839cb99e KA |
192 | int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb); |
193 | void *blk_pointer; | |
194 | dma_addr_t blkp; | |
195 | ||
196 | while (adapter->alloc_ccbs < adapter->initccbs) { | |
17a361b2 CH |
197 | blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev, |
198 | blk_size, &blkp, GFP_KERNEL); | |
839cb99e KA |
199 | if (blk_pointer == NULL) { |
200 | blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", | |
201 | adapter); | |
1da177e4 LT |
202 | return false; |
203 | } | |
839cb99e | 204 | blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp); |
1da177e4 LT |
205 | } |
206 | return true; | |
207 | } | |
208 | ||
209 | ||
210 | /* | |
839cb99e | 211 | blogic_destroy_ccbs deallocates the CCBs for Host Adapter. |
1da177e4 LT |
212 | */ |
213 | ||
839cb99e | 214 | static void blogic_destroy_ccbs(struct blogic_adapter *adapter) |
1da177e4 | 215 | { |
839cb99e KA |
216 | struct blogic_ccb *next_ccb = adapter->all_ccbs, *ccb, *lastccb = NULL; |
217 | adapter->all_ccbs = NULL; | |
218 | adapter->free_ccbs = NULL; | |
219 | while ((ccb = next_ccb) != NULL) { | |
220 | next_ccb = ccb->next_all; | |
221 | if (ccb->allocgrp_head) { | |
222 | if (lastccb) | |
17a361b2 | 223 | dma_free_coherent(&adapter->pci_device->dev, |
839cb99e KA |
224 | lastccb->allocgrp_size, lastccb, |
225 | lastccb->allocgrp_head); | |
226 | lastccb = ccb; | |
1da177e4 LT |
227 | } |
228 | } | |
839cb99e | 229 | if (lastccb) |
17a361b2 CH |
230 | dma_free_coherent(&adapter->pci_device->dev, |
231 | lastccb->allocgrp_size, lastccb, | |
232 | lastccb->allocgrp_head); | |
1da177e4 LT |
233 | } |
234 | ||
235 | ||
236 | /* | |
839cb99e | 237 | blogic_create_addlccbs allocates Additional CCBs for Host Adapter. If |
1da177e4 LT |
238 | allocation fails and there are no remaining CCBs available, the Driver Queue |
239 | Depth is decreased to a known safe value to avoid potential deadlocks when | |
240 | multiple host adapters share the same IRQ Channel. | |
241 | */ | |
242 | ||
839cb99e KA |
243 | static void blogic_create_addlccbs(struct blogic_adapter *adapter, |
244 | int addl_ccbs, bool print_success) | |
1da177e4 | 245 | { |
839cb99e KA |
246 | int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb); |
247 | int prev_alloc = adapter->alloc_ccbs; | |
248 | void *blk_pointer; | |
249 | dma_addr_t blkp; | |
250 | if (addl_ccbs <= 0) | |
1da177e4 | 251 | return; |
839cb99e | 252 | while (adapter->alloc_ccbs - prev_alloc < addl_ccbs) { |
17a361b2 CH |
253 | blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev, |
254 | blk_size, &blkp, GFP_KERNEL); | |
839cb99e | 255 | if (blk_pointer == NULL) |
1da177e4 | 256 | break; |
839cb99e | 257 | blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp); |
1da177e4 | 258 | } |
839cb99e KA |
259 | if (adapter->alloc_ccbs > prev_alloc) { |
260 | if (print_success) | |
261 | blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs); | |
1da177e4 LT |
262 | return; |
263 | } | |
839cb99e KA |
264 | blogic_notice("Failed to allocate additional CCBs\n", adapter); |
265 | if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) { | |
266 | adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count; | |
267 | adapter->scsi_host->can_queue = adapter->drvr_qdepth; | |
1da177e4 LT |
268 | } |
269 | } | |
270 | ||
271 | /* | |
839cb99e | 272 | blogic_alloc_ccb allocates a CCB from Host Adapter's free list, |
1da177e4 LT |
273 | allocating more memory from the Kernel if necessary. The Host Adapter's |
274 | Lock should already have been acquired by the caller. | |
275 | */ | |
276 | ||
839cb99e | 277 | static struct blogic_ccb *blogic_alloc_ccb(struct blogic_adapter *adapter) |
1da177e4 | 278 | { |
839cb99e KA |
279 | static unsigned long serial; |
280 | struct blogic_ccb *ccb; | |
281 | ccb = adapter->free_ccbs; | |
282 | if (ccb != NULL) { | |
283 | ccb->serial = ++serial; | |
284 | adapter->free_ccbs = ccb->next; | |
285 | ccb->next = NULL; | |
286 | if (adapter->free_ccbs == NULL) | |
287 | blogic_create_addlccbs(adapter, adapter->inc_ccbs, | |
288 | true); | |
289 | return ccb; | |
290 | } | |
291 | blogic_create_addlccbs(adapter, adapter->inc_ccbs, true); | |
292 | ccb = adapter->free_ccbs; | |
293 | if (ccb == NULL) | |
1da177e4 | 294 | return NULL; |
839cb99e KA |
295 | ccb->serial = ++serial; |
296 | adapter->free_ccbs = ccb->next; | |
297 | ccb->next = NULL; | |
298 | return ccb; | |
1da177e4 LT |
299 | } |
300 | ||
301 | ||
302 | /* | |
839cb99e | 303 | blogic_dealloc_ccb deallocates a CCB, returning it to the Host Adapter's |
1da177e4 LT |
304 | free list. The Host Adapter's Lock should already have been acquired by the |
305 | caller. | |
306 | */ | |
307 | ||
eeceec90 | 308 | static void blogic_dealloc_ccb(struct blogic_ccb *ccb, int dma_unmap) |
1da177e4 | 309 | { |
839cb99e | 310 | struct blogic_adapter *adapter = ccb->adapter; |
1da177e4 | 311 | |
eeceec90 KA |
312 | if (ccb->command != NULL) |
313 | scsi_dma_unmap(ccb->command); | |
314 | if (dma_unmap) | |
17a361b2 CH |
315 | dma_unmap_single(&adapter->pci_device->dev, ccb->sensedata, |
316 | ccb->sense_datalen, DMA_FROM_DEVICE); | |
1da177e4 | 317 | |
839cb99e KA |
318 | ccb->command = NULL; |
319 | ccb->status = BLOGIC_CCB_FREE; | |
320 | ccb->next = adapter->free_ccbs; | |
321 | adapter->free_ccbs = ccb; | |
1da177e4 LT |
322 | } |
323 | ||
324 | ||
325 | /* | |
839cb99e KA |
326 | blogic_cmd sends the command opcode to adapter, optionally |
327 | providing paramlen bytes of param and receiving at most | |
328 | replylen bytes of reply; any excess reply data is received but | |
1da177e4 LT |
329 | discarded. |
330 | ||
331 | On success, this function returns the number of reply bytes read from | |
332 | the Host Adapter (including any discarded data); on failure, it returns | |
333 | -1 if the command was invalid, or -2 if a timeout occurred. | |
334 | ||
839cb99e | 335 | blogic_cmd is called exclusively during host adapter detection and |
1da177e4 LT |
336 | initialization, so performance and latency are not critical, and exclusive |
337 | access to the Host Adapter hardware is assumed. Once the host adapter and | |
338 | driver are initialized, the only Host Adapter command that is issued is the | |
339 | single byte Execute Mailbox Command operation code, which does not require | |
340 | waiting for the Host Adapter Ready bit to be set in the Status Register. | |
341 | */ | |
342 | ||
839cb99e KA |
343 | static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode, |
344 | void *param, int paramlen, void *reply, int replylen) | |
1da177e4 | 345 | { |
839cb99e KA |
346 | unsigned char *param_p = (unsigned char *) param; |
347 | unsigned char *reply_p = (unsigned char *) reply; | |
348 | union blogic_stat_reg statusreg; | |
349 | union blogic_int_reg intreg; | |
350 | unsigned long processor_flag = 0; | |
351 | int reply_b = 0, result; | |
352 | long timeout; | |
1da177e4 LT |
353 | /* |
354 | Clear out the Reply Data if provided. | |
355 | */ | |
839cb99e KA |
356 | if (replylen > 0) |
357 | memset(reply, 0, replylen); | |
1da177e4 | 358 | /* |
839cb99e KA |
359 | If the IRQ Channel has not yet been acquired, then interrupts |
360 | must be disabled while issuing host adapter commands since a | |
361 | Command Complete interrupt could occur if the IRQ Channel was | |
362 | previously enabled by another BusLogic Host Adapter or another | |
363 | driver sharing the same IRQ Channel. | |
1da177e4 | 364 | */ |
839cb99e KA |
365 | if (!adapter->irq_acquired) |
366 | local_irq_save(processor_flag); | |
1da177e4 | 367 | /* |
839cb99e KA |
368 | Wait for the Host Adapter Ready bit to be set and the |
369 | Command/Parameter Register Busy bit to be reset in the Status | |
370 | Register. | |
1da177e4 | 371 | */ |
839cb99e KA |
372 | timeout = 10000; |
373 | while (--timeout >= 0) { | |
374 | statusreg.all = blogic_rdstatus(adapter); | |
375 | if (statusreg.sr.adapter_ready && !statusreg.sr.cmd_param_busy) | |
1da177e4 LT |
376 | break; |
377 | udelay(100); | |
378 | } | |
839cb99e KA |
379 | if (timeout < 0) { |
380 | blogic_cmd_failure_reason = | |
381 | "Timeout waiting for Host Adapter Ready"; | |
382 | result = -2; | |
383 | goto done; | |
1da177e4 LT |
384 | } |
385 | /* | |
839cb99e | 386 | Write the opcode to the Command/Parameter Register. |
1da177e4 | 387 | */ |
839cb99e KA |
388 | adapter->adapter_cmd_complete = false; |
389 | blogic_setcmdparam(adapter, opcode); | |
1da177e4 LT |
390 | /* |
391 | Write any additional Parameter Bytes. | |
392 | */ | |
839cb99e KA |
393 | timeout = 10000; |
394 | while (paramlen > 0 && --timeout >= 0) { | |
1da177e4 | 395 | /* |
839cb99e KA |
396 | Wait 100 microseconds to give the Host Adapter enough |
397 | time to determine whether the last value written to the | |
398 | Command/Parameter Register was valid or not. If the | |
399 | Command Complete bit is set in the Interrupt Register, | |
400 | then the Command Invalid bit in the Status Register will | |
401 | be reset if the Operation Code or Parameter was valid | |
402 | and the command has completed, or set if the Operation | |
403 | Code or Parameter was invalid. If the Data In Register | |
404 | Ready bit is set in the Status Register, then the | |
405 | Operation Code was valid, and data is waiting to be read | |
406 | back from the Host Adapter. Otherwise, wait for the | |
407 | Command/Parameter Register Busy bit in the Status | |
408 | Register to be reset. | |
1da177e4 LT |
409 | */ |
410 | udelay(100); | |
839cb99e KA |
411 | intreg.all = blogic_rdint(adapter); |
412 | statusreg.all = blogic_rdstatus(adapter); | |
413 | if (intreg.ir.cmd_complete) | |
1da177e4 | 414 | break; |
839cb99e | 415 | if (adapter->adapter_cmd_complete) |
1da177e4 | 416 | break; |
839cb99e | 417 | if (statusreg.sr.datain_ready) |
1da177e4 | 418 | break; |
839cb99e | 419 | if (statusreg.sr.cmd_param_busy) |
1da177e4 | 420 | continue; |
839cb99e KA |
421 | blogic_setcmdparam(adapter, *param_p++); |
422 | paramlen--; | |
423 | } | |
424 | if (timeout < 0) { | |
425 | blogic_cmd_failure_reason = | |
426 | "Timeout waiting for Parameter Acceptance"; | |
427 | result = -2; | |
428 | goto done; | |
429 | } | |
430 | /* | |
431 | The Modify I/O Address command does not cause a Command Complete | |
432 | Interrupt. | |
433 | */ | |
434 | if (opcode == BLOGIC_MOD_IOADDR) { | |
435 | statusreg.all = blogic_rdstatus(adapter); | |
436 | if (statusreg.sr.cmd_invalid) { | |
437 | blogic_cmd_failure_reason = | |
438 | "Modify I/O Address Invalid"; | |
439 | result = -1; | |
440 | goto done; | |
1da177e4 | 441 | } |
839cb99e KA |
442 | if (blogic_global_options.trace_config) |
443 | blogic_notice("blogic_cmd(%02X) Status = %02X: " "(Modify I/O Address)\n", adapter, opcode, statusreg.all); | |
444 | result = 0; | |
445 | goto done; | |
1da177e4 LT |
446 | } |
447 | /* | |
448 | Select an appropriate timeout value for awaiting command completion. | |
449 | */ | |
839cb99e KA |
450 | switch (opcode) { |
451 | case BLOGIC_INQ_DEV0TO7: | |
452 | case BLOGIC_INQ_DEV8TO15: | |
453 | case BLOGIC_INQ_DEV: | |
1da177e4 | 454 | /* Approximately 60 seconds. */ |
839cb99e | 455 | timeout = 60 * 10000; |
1da177e4 LT |
456 | break; |
457 | default: | |
458 | /* Approximately 1 second. */ | |
839cb99e | 459 | timeout = 10000; |
1da177e4 LT |
460 | break; |
461 | } | |
462 | /* | |
839cb99e KA |
463 | Receive any Reply Bytes, waiting for either the Command |
464 | Complete bit to be set in the Interrupt Register, or for the | |
465 | Interrupt Handler to set the Host Adapter Command Completed | |
466 | bit in the Host Adapter structure. | |
1da177e4 | 467 | */ |
839cb99e KA |
468 | while (--timeout >= 0) { |
469 | intreg.all = blogic_rdint(adapter); | |
470 | statusreg.all = blogic_rdstatus(adapter); | |
471 | if (intreg.ir.cmd_complete) | |
1da177e4 | 472 | break; |
839cb99e | 473 | if (adapter->adapter_cmd_complete) |
1da177e4 | 474 | break; |
839cb99e KA |
475 | if (statusreg.sr.datain_ready) { |
476 | if (++reply_b <= replylen) | |
477 | *reply_p++ = blogic_rddatain(adapter); | |
1da177e4 | 478 | else |
839cb99e | 479 | blogic_rddatain(adapter); |
1da177e4 | 480 | } |
839cb99e KA |
481 | if (opcode == BLOGIC_FETCH_LOCALRAM && |
482 | statusreg.sr.adapter_ready) | |
1da177e4 LT |
483 | break; |
484 | udelay(100); | |
485 | } | |
839cb99e KA |
486 | if (timeout < 0) { |
487 | blogic_cmd_failure_reason = | |
488 | "Timeout waiting for Command Complete"; | |
489 | result = -2; | |
490 | goto done; | |
1da177e4 LT |
491 | } |
492 | /* | |
493 | Clear any pending Command Complete Interrupt. | |
494 | */ | |
839cb99e | 495 | blogic_intreset(adapter); |
1da177e4 LT |
496 | /* |
497 | Provide tracing information if requested. | |
498 | */ | |
839cb99e | 499 | if (blogic_global_options.trace_config) { |
1da177e4 | 500 | int i; |
839cb99e KA |
501 | blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:", |
502 | adapter, opcode, statusreg.all, replylen, | |
503 | reply_b); | |
504 | if (replylen > reply_b) | |
505 | replylen = reply_b; | |
506 | for (i = 0; i < replylen; i++) | |
507 | blogic_notice(" %02X", adapter, | |
508 | ((unsigned char *) reply)[i]); | |
509 | blogic_notice("\n", adapter); | |
1da177e4 LT |
510 | } |
511 | /* | |
512 | Process Command Invalid conditions. | |
513 | */ | |
839cb99e | 514 | if (statusreg.sr.cmd_invalid) { |
1da177e4 | 515 | /* |
839cb99e KA |
516 | Some early BusLogic Host Adapters may not recover |
517 | properly from a Command Invalid condition, so if this | |
518 | appears to be the case, a Soft Reset is issued to the | |
519 | Host Adapter. Potentially invalid commands are never | |
520 | attempted after Mailbox Initialization is performed, | |
521 | so there should be no Host Adapter state lost by a | |
1da177e4 LT |
522 | Soft Reset in response to a Command Invalid condition. |
523 | */ | |
524 | udelay(1000); | |
839cb99e KA |
525 | statusreg.all = blogic_rdstatus(adapter); |
526 | if (statusreg.sr.cmd_invalid || statusreg.sr.rsvd || | |
527 | statusreg.sr.datain_ready || | |
528 | statusreg.sr.cmd_param_busy || | |
529 | !statusreg.sr.adapter_ready || | |
530 | !statusreg.sr.init_reqd || | |
531 | statusreg.sr.diag_active || | |
532 | statusreg.sr.diag_failed) { | |
533 | blogic_softreset(adapter); | |
1da177e4 LT |
534 | udelay(1000); |
535 | } | |
839cb99e KA |
536 | blogic_cmd_failure_reason = "Command Invalid"; |
537 | result = -1; | |
538 | goto done; | |
1da177e4 LT |
539 | } |
540 | /* | |
541 | Handle Excess Parameters Supplied conditions. | |
542 | */ | |
839cb99e KA |
543 | if (paramlen > 0) { |
544 | blogic_cmd_failure_reason = "Excess Parameters Supplied"; | |
545 | result = -1; | |
546 | goto done; | |
1da177e4 LT |
547 | } |
548 | /* | |
549 | Indicate the command completed successfully. | |
550 | */ | |
839cb99e KA |
551 | blogic_cmd_failure_reason = NULL; |
552 | result = reply_b; | |
1da177e4 LT |
553 | /* |
554 | Restore the interrupt status if necessary and return. | |
555 | */ | |
839cb99e KA |
556 | done: |
557 | if (!adapter->irq_acquired) | |
558 | local_irq_restore(processor_flag); | |
559 | return result; | |
1da177e4 LT |
560 | } |
561 | ||
562 | ||
563 | /* | |
839cb99e | 564 | blogic_add_probeaddr_isa appends a single ISA I/O Address to the list |
1da177e4 LT |
565 | of I/O Address and Bus Probe Information to be checked for potential BusLogic |
566 | Host Adapters. | |
567 | */ | |
568 | ||
839cb99e | 569 | static void __init blogic_add_probeaddr_isa(unsigned long io_addr) |
1da177e4 | 570 | { |
839cb99e KA |
571 | struct blogic_probeinfo *probeinfo; |
572 | if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS) | |
1da177e4 | 573 | return; |
839cb99e KA |
574 | probeinfo = &blogic_probeinfo_list[blogic_probeinfo_count++]; |
575 | probeinfo->adapter_type = BLOGIC_MULTIMASTER; | |
576 | probeinfo->adapter_bus_type = BLOGIC_ISA_BUS; | |
577 | probeinfo->io_addr = io_addr; | |
578 | probeinfo->pci_device = NULL; | |
1da177e4 LT |
579 | } |
580 | ||
581 | ||
582 | /* | |
839cb99e | 583 | blogic_init_probeinfo_isa initializes the list of I/O Address and |
1da177e4 LT |
584 | Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters |
585 | only from the list of standard BusLogic MultiMaster ISA I/O Addresses. | |
586 | */ | |
587 | ||
839cb99e | 588 | static void __init blogic_init_probeinfo_isa(struct blogic_adapter *adapter) |
1da177e4 LT |
589 | { |
590 | /* | |
839cb99e KA |
591 | If BusLogic Driver Options specifications requested that ISA |
592 | Bus Probes be inhibited, do not proceed further. | |
1da177e4 | 593 | */ |
839cb99e | 594 | if (blogic_probe_options.noprobe_isa) |
1da177e4 LT |
595 | return; |
596 | /* | |
597 | Append the list of standard BusLogic MultiMaster ISA I/O Addresses. | |
598 | */ | |
839cb99e KA |
599 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe330) |
600 | blogic_add_probeaddr_isa(0x330); | |
601 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe334) | |
602 | blogic_add_probeaddr_isa(0x334); | |
603 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe230) | |
604 | blogic_add_probeaddr_isa(0x230); | |
605 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe234) | |
606 | blogic_add_probeaddr_isa(0x234); | |
607 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe130) | |
608 | blogic_add_probeaddr_isa(0x130); | |
609 | if (!blogic_probe_options.limited_isa || blogic_probe_options.probe134) | |
610 | blogic_add_probeaddr_isa(0x134); | |
1da177e4 LT |
611 | } |
612 | ||
613 | ||
614 | #ifdef CONFIG_PCI | |
615 | ||
616 | ||
617 | /* | |
839cb99e | 618 | blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order |
1da177e4 LT |
619 | of increasing PCI Bus and Device Number. |
620 | */ | |
621 | ||
839cb99e KA |
622 | static void __init blogic_sort_probeinfo(struct blogic_probeinfo |
623 | *probeinfo_list, int probeinfo_cnt) | |
1da177e4 | 624 | { |
839cb99e KA |
625 | int last_exchange = probeinfo_cnt - 1, bound, j; |
626 | ||
627 | while (last_exchange > 0) { | |
628 | bound = last_exchange; | |
629 | last_exchange = 0; | |
630 | for (j = 0; j < bound; j++) { | |
631 | struct blogic_probeinfo *probeinfo1 = | |
632 | &probeinfo_list[j]; | |
633 | struct blogic_probeinfo *probeinfo2 = | |
634 | &probeinfo_list[j + 1]; | |
635 | if (probeinfo1->bus > probeinfo2->bus || | |
636 | (probeinfo1->bus == probeinfo2->bus && | |
637 | (probeinfo1->dev > probeinfo2->dev))) { | |
638 | struct blogic_probeinfo tmp_probeinfo; | |
639 | ||
640 | memcpy(&tmp_probeinfo, probeinfo1, | |
641 | sizeof(struct blogic_probeinfo)); | |
642 | memcpy(probeinfo1, probeinfo2, | |
643 | sizeof(struct blogic_probeinfo)); | |
644 | memcpy(probeinfo2, &tmp_probeinfo, | |
645 | sizeof(struct blogic_probeinfo)); | |
646 | last_exchange = j; | |
1da177e4 LT |
647 | } |
648 | } | |
649 | } | |
650 | } | |
651 | ||
652 | ||
653 | /* | |
839cb99e | 654 | blogic_init_mm_probeinfo initializes the list of I/O Address |
1da177e4 LT |
655 | and Bus Probe Information to be checked for potential BusLogic MultiMaster |
656 | SCSI Host Adapters by interrogating the PCI Configuration Space on PCI | |
657 | machines as well as from the list of standard BusLogic MultiMaster ISA | |
658 | I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found. | |
659 | */ | |
660 | ||
839cb99e | 661 | static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) |
1da177e4 | 662 | { |
839cb99e KA |
663 | struct blogic_probeinfo *pr_probeinfo = |
664 | &blogic_probeinfo_list[blogic_probeinfo_count]; | |
665 | int nonpr_mmindex = blogic_probeinfo_count + 1; | |
666 | int nonpr_mmcount = 0, mmcount = 0; | |
667 | bool force_scan_order = false; | |
668 | bool force_scan_order_checked = false; | |
669 | bool addr_seen[6]; | |
670 | struct pci_dev *pci_device = NULL; | |
1da177e4 | 671 | int i; |
839cb99e | 672 | if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS) |
1da177e4 | 673 | return 0; |
839cb99e | 674 | blogic_probeinfo_count++; |
1da177e4 | 675 | for (i = 0; i < 6; i++) |
839cb99e KA |
676 | addr_seen[i] = false; |
677 | /* | |
678 | Iterate over the MultiMaster PCI Host Adapters. For each | |
679 | enumerated host adapter, determine whether its ISA Compatible | |
680 | I/O Port is enabled and if so, whether it is assigned the | |
681 | Primary I/O Address. A host adapter that is assigned the | |
682 | Primary I/O Address will always be the preferred boot device. | |
683 | The MultiMaster BIOS will first recognize a host adapter at | |
684 | the Primary I/O Address, then any other PCI host adapters, | |
685 | and finally any host adapters located at the remaining | |
686 | standard ISA I/O Addresses. When a PCI host adapter is found | |
687 | with its ISA Compatible I/O Port enabled, a command is issued | |
688 | to disable the ISA Compatible I/O Port, and it is noted that the | |
1da177e4 LT |
689 | particular standard ISA I/O Address need not be probed. |
690 | */ | |
839cb99e KA |
691 | pr_probeinfo->io_addr = 0; |
692 | while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, | |
693 | PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, | |
694 | pci_device)) != NULL) { | |
6541932e | 695 | struct blogic_adapter *host_adapter = adapter; |
839cb99e KA |
696 | struct blogic_adapter_info adapter_info; |
697 | enum blogic_isa_ioport mod_ioaddr_req; | |
698 | unsigned char bus; | |
699 | unsigned char device; | |
700 | unsigned int irq_ch; | |
701 | unsigned long base_addr0; | |
702 | unsigned long base_addr1; | |
703 | unsigned long io_addr; | |
704 | unsigned long pci_addr; | |
705 | ||
706 | if (pci_enable_device(pci_device)) | |
1da177e4 LT |
707 | continue; |
708 | ||
17a361b2 | 709 | if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) |
1da177e4 LT |
710 | continue; |
711 | ||
839cb99e KA |
712 | bus = pci_device->bus->number; |
713 | device = pci_device->devfn >> 3; | |
714 | irq_ch = pci_device->irq; | |
715 | io_addr = base_addr0 = pci_resource_start(pci_device, 0); | |
716 | pci_addr = base_addr1 = pci_resource_start(pci_device, 1); | |
1da177e4 | 717 | |
839cb99e KA |
718 | if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) { |
719 | blogic_err("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, base_addr0); | |
720 | blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr); | |
1da177e4 LT |
721 | continue; |
722 | } | |
839cb99e KA |
723 | if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) { |
724 | blogic_err("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, base_addr1); | |
725 | blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr); | |
1da177e4 LT |
726 | continue; |
727 | } | |
839cb99e KA |
728 | if (irq_ch == 0) { |
729 | blogic_err("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, irq_ch); | |
730 | blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr); | |
1da177e4 LT |
731 | continue; |
732 | } | |
839cb99e KA |
733 | if (blogic_global_options.trace_probe) { |
734 | blogic_notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL); | |
735 | blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr); | |
1da177e4 LT |
736 | } |
737 | /* | |
738 | Issue the Inquire PCI Host Adapter Information command to determine | |
739 | the ISA Compatible I/O Port. If the ISA Compatible I/O Port is | |
740 | known and enabled, note that the particular Standard ISA I/O | |
741 | Address should not be probed. | |
742 | */ | |
6541932e KA |
743 | host_adapter->io_addr = io_addr; |
744 | blogic_intreset(host_adapter); | |
745 | if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, | |
839cb99e KA |
746 | &adapter_info, sizeof(adapter_info)) == |
747 | sizeof(adapter_info)) { | |
748 | if (adapter_info.isa_port < 6) | |
749 | addr_seen[adapter_info.isa_port] = true; | |
1da177e4 | 750 | } else |
839cb99e | 751 | adapter_info.isa_port = BLOGIC_IO_DISABLE; |
1da177e4 | 752 | /* |
839cb99e KA |
753 | Issue the Modify I/O Address command to disable the |
754 | ISA Compatible I/O Port. On PCI Host Adapters, the | |
755 | Modify I/O Address command allows modification of the | |
756 | ISA compatible I/O Address that the Host Adapter | |
757 | responds to; it does not affect the PCI compliant | |
758 | I/O Address assigned at system initialization. | |
1da177e4 | 759 | */ |
839cb99e | 760 | mod_ioaddr_req = BLOGIC_IO_DISABLE; |
6541932e | 761 | blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req, |
839cb99e | 762 | sizeof(mod_ioaddr_req), NULL, 0); |
1da177e4 | 763 | /* |
839cb99e KA |
764 | For the first MultiMaster Host Adapter enumerated, |
765 | issue the Fetch Host Adapter Local RAM command to read | |
766 | byte 45 of the AutoSCSI area, for the setting of the | |
767 | "Use Bus And Device # For PCI Scanning Seq." option. | |
768 | Issue the Inquire Board ID command since this option is | |
1da177e4 LT |
769 | only valid for the BT-948/958/958D. |
770 | */ | |
839cb99e KA |
771 | if (!force_scan_order_checked) { |
772 | struct blogic_fetch_localram fetch_localram; | |
773 | struct blogic_autoscsi_byte45 autoscsi_byte45; | |
774 | struct blogic_board_id id; | |
775 | ||
776 | fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45; | |
777 | fetch_localram.count = sizeof(autoscsi_byte45); | |
6541932e | 778 | blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM, |
839cb99e KA |
779 | &fetch_localram, sizeof(fetch_localram), |
780 | &autoscsi_byte45, | |
781 | sizeof(autoscsi_byte45)); | |
6541932e KA |
782 | blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0, |
783 | &id, sizeof(id)); | |
839cb99e KA |
784 | if (id.fw_ver_digit1 == '5') |
785 | force_scan_order = | |
786 | autoscsi_byte45.force_scan_order; | |
787 | force_scan_order_checked = true; | |
1da177e4 LT |
788 | } |
789 | /* | |
839cb99e KA |
790 | Determine whether this MultiMaster Host Adapter has its |
791 | ISA Compatible I/O Port enabled and is assigned the | |
792 | Primary I/O Address. If it does, then it is the Primary | |
793 | MultiMaster Host Adapter and must be recognized first. | |
794 | If it does not, then it is added to the list for probing | |
795 | after any Primary MultiMaster Host Adapter is probed. | |
1da177e4 | 796 | */ |
839cb99e KA |
797 | if (adapter_info.isa_port == BLOGIC_IO_330) { |
798 | pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER; | |
799 | pr_probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; | |
800 | pr_probeinfo->io_addr = io_addr; | |
801 | pr_probeinfo->pci_addr = pci_addr; | |
802 | pr_probeinfo->bus = bus; | |
803 | pr_probeinfo->dev = device; | |
804 | pr_probeinfo->irq_ch = irq_ch; | |
805 | pr_probeinfo->pci_device = pci_dev_get(pci_device); | |
806 | mmcount++; | |
807 | } else if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) { | |
808 | struct blogic_probeinfo *probeinfo = | |
809 | &blogic_probeinfo_list[blogic_probeinfo_count++]; | |
810 | probeinfo->adapter_type = BLOGIC_MULTIMASTER; | |
811 | probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; | |
812 | probeinfo->io_addr = io_addr; | |
813 | probeinfo->pci_addr = pci_addr; | |
814 | probeinfo->bus = bus; | |
815 | probeinfo->dev = device; | |
816 | probeinfo->irq_ch = irq_ch; | |
817 | probeinfo->pci_device = pci_dev_get(pci_device); | |
818 | nonpr_mmcount++; | |
819 | mmcount++; | |
1da177e4 | 820 | } else |
839cb99e KA |
821 | blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL); |
822 | } | |
823 | /* | |
824 | If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." | |
825 | option is ON for the first enumerated MultiMaster Host Adapter, | |
826 | and if that host adapter is a BT-948/958/958D, then the | |
827 | MultiMaster BIOS will recognize MultiMaster Host Adapters in | |
828 | the order of increasing PCI Bus and Device Number. In that case, | |
829 | sort the probe information into the same order the BIOS uses. | |
830 | If this option is OFF, then the MultiMaster BIOS will recognize | |
831 | MultiMaster Host Adapters in the order they are enumerated by | |
832 | the PCI BIOS, and hence no sorting is necessary. | |
833 | */ | |
834 | if (force_scan_order) | |
835 | blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex], | |
836 | nonpr_mmcount); | |
837 | /* | |
838 | If no PCI MultiMaster Host Adapter is assigned the Primary | |
839 | I/O Address, then the Primary I/O Address must be probed | |
840 | explicitly before any PCI host adapters are probed. | |
841 | */ | |
842 | if (!blogic_probe_options.noprobe_isa) | |
843 | if (pr_probeinfo->io_addr == 0 && | |
844 | (!blogic_probe_options.limited_isa || | |
845 | blogic_probe_options.probe330)) { | |
846 | pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER; | |
847 | pr_probeinfo->adapter_bus_type = BLOGIC_ISA_BUS; | |
848 | pr_probeinfo->io_addr = 0x330; | |
1da177e4 LT |
849 | } |
850 | /* | |
851 | Append the list of standard BusLogic MultiMaster ISA I/O Addresses, | |
852 | omitting the Primary I/O Address which has already been handled. | |
853 | */ | |
839cb99e KA |
854 | if (!blogic_probe_options.noprobe_isa) { |
855 | if (!addr_seen[1] && | |
856 | (!blogic_probe_options.limited_isa || | |
857 | blogic_probe_options.probe334)) | |
858 | blogic_add_probeaddr_isa(0x334); | |
859 | if (!addr_seen[2] && | |
860 | (!blogic_probe_options.limited_isa || | |
861 | blogic_probe_options.probe230)) | |
862 | blogic_add_probeaddr_isa(0x230); | |
863 | if (!addr_seen[3] && | |
864 | (!blogic_probe_options.limited_isa || | |
865 | blogic_probe_options.probe234)) | |
866 | blogic_add_probeaddr_isa(0x234); | |
867 | if (!addr_seen[4] && | |
868 | (!blogic_probe_options.limited_isa || | |
869 | blogic_probe_options.probe130)) | |
870 | blogic_add_probeaddr_isa(0x130); | |
871 | if (!addr_seen[5] && | |
872 | (!blogic_probe_options.limited_isa || | |
873 | blogic_probe_options.probe134)) | |
874 | blogic_add_probeaddr_isa(0x134); | |
1da177e4 LT |
875 | } |
876 | /* | |
877 | Iterate over the older non-compliant MultiMaster PCI Host Adapters, | |
878 | noting the PCI bus location and assigned IRQ Channel. | |
879 | */ | |
839cb99e KA |
880 | pci_device = NULL; |
881 | while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, | |
882 | PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, | |
883 | pci_device)) != NULL) { | |
884 | unsigned char bus; | |
885 | unsigned char device; | |
886 | unsigned int irq_ch; | |
887 | unsigned long io_addr; | |
1da177e4 | 888 | |
839cb99e | 889 | if (pci_enable_device(pci_device)) |
1da177e4 LT |
890 | continue; |
891 | ||
17a361b2 | 892 | if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) |
1da177e4 LT |
893 | continue; |
894 | ||
839cb99e KA |
895 | bus = pci_device->bus->number; |
896 | device = pci_device->devfn >> 3; | |
897 | irq_ch = pci_device->irq; | |
898 | io_addr = pci_resource_start(pci_device, 0); | |
1da177e4 | 899 | |
839cb99e | 900 | if (io_addr == 0 || irq_ch == 0) |
1da177e4 | 901 | continue; |
839cb99e KA |
902 | for (i = 0; i < blogic_probeinfo_count; i++) { |
903 | struct blogic_probeinfo *probeinfo = | |
904 | &blogic_probeinfo_list[i]; | |
905 | if (probeinfo->io_addr == io_addr && | |
906 | probeinfo->adapter_type == BLOGIC_MULTIMASTER) { | |
907 | probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; | |
908 | probeinfo->pci_addr = 0; | |
909 | probeinfo->bus = bus; | |
910 | probeinfo->dev = device; | |
911 | probeinfo->irq_ch = irq_ch; | |
912 | probeinfo->pci_device = pci_dev_get(pci_device); | |
1da177e4 LT |
913 | break; |
914 | } | |
915 | } | |
916 | } | |
839cb99e | 917 | return mmcount; |
1da177e4 LT |
918 | } |
919 | ||
920 | ||
921 | /* | |
839cb99e | 922 | blogic_init_fp_probeinfo initializes the list of I/O Address |
1da177e4 LT |
923 | and Bus Probe Information to be checked for potential BusLogic FlashPoint |
924 | Host Adapters by interrogating the PCI Configuration Space. It returns the | |
925 | number of FlashPoint Host Adapters found. | |
926 | */ | |
927 | ||
839cb99e | 928 | static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter) |
1da177e4 | 929 | { |
839cb99e KA |
930 | int fpindex = blogic_probeinfo_count, fpcount = 0; |
931 | struct pci_dev *pci_device = NULL; | |
1da177e4 LT |
932 | /* |
933 | Interrogate PCI Configuration Space for any FlashPoint Host Adapters. | |
934 | */ | |
839cb99e KA |
935 | while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, |
936 | PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, | |
937 | pci_device)) != NULL) { | |
938 | unsigned char bus; | |
939 | unsigned char device; | |
940 | unsigned int irq_ch; | |
941 | unsigned long base_addr0; | |
942 | unsigned long base_addr1; | |
943 | unsigned long io_addr; | |
944 | unsigned long pci_addr; | |
945 | ||
946 | if (pci_enable_device(pci_device)) | |
1da177e4 LT |
947 | continue; |
948 | ||
17a361b2 | 949 | if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) |
1da177e4 LT |
950 | continue; |
951 | ||
839cb99e KA |
952 | bus = pci_device->bus->number; |
953 | device = pci_device->devfn >> 3; | |
954 | irq_ch = pci_device->irq; | |
955 | io_addr = base_addr0 = pci_resource_start(pci_device, 0); | |
956 | pci_addr = base_addr1 = pci_resource_start(pci_device, 1); | |
78b4b05d | 957 | #ifdef CONFIG_SCSI_FLASHPOINT |
839cb99e KA |
958 | if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) { |
959 | blogic_err("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, base_addr0); | |
960 | blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr); | |
1da177e4 LT |
961 | continue; |
962 | } | |
839cb99e KA |
963 | if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) { |
964 | blogic_err("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, base_addr1); | |
965 | blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr); | |
1da177e4 LT |
966 | continue; |
967 | } | |
839cb99e KA |
968 | if (irq_ch == 0) { |
969 | blogic_err("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, irq_ch); | |
970 | blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr); | |
1da177e4 LT |
971 | continue; |
972 | } | |
839cb99e KA |
973 | if (blogic_global_options.trace_probe) { |
974 | blogic_notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL); | |
975 | blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr); | |
1da177e4 | 976 | } |
839cb99e KA |
977 | if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) { |
978 | struct blogic_probeinfo *probeinfo = | |
979 | &blogic_probeinfo_list[blogic_probeinfo_count++]; | |
980 | probeinfo->adapter_type = BLOGIC_FLASHPOINT; | |
981 | probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; | |
982 | probeinfo->io_addr = io_addr; | |
983 | probeinfo->pci_addr = pci_addr; | |
984 | probeinfo->bus = bus; | |
985 | probeinfo->dev = device; | |
986 | probeinfo->irq_ch = irq_ch; | |
987 | probeinfo->pci_device = pci_dev_get(pci_device); | |
988 | fpcount++; | |
1da177e4 | 989 | } else |
839cb99e | 990 | blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL); |
1da177e4 | 991 | #else |
839cb99e KA |
992 | blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, bus, device); |
993 | blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch); | |
994 | blogic_err("BusLogic: support was omitted in this kernel " "configuration.\n", NULL); | |
1da177e4 LT |
995 | #endif |
996 | } | |
997 | /* | |
998 | The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of | |
999 | increasing PCI Bus and Device Number, so sort the probe information into | |
1000 | the same order the BIOS uses. | |
1001 | */ | |
839cb99e KA |
1002 | blogic_sort_probeinfo(&blogic_probeinfo_list[fpindex], fpcount); |
1003 | return fpcount; | |
1da177e4 LT |
1004 | } |
1005 | ||
1006 | ||
1007 | /* | |
839cb99e | 1008 | blogic_init_probeinfo_list initializes the list of I/O Address and Bus |
1da177e4 LT |
1009 | Probe Information to be checked for potential BusLogic SCSI Host Adapters by |
1010 | interrogating the PCI Configuration Space on PCI machines as well as from the | |
1011 | list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both | |
1012 | FlashPoint and PCI MultiMaster Host Adapters are present, this driver will | |
1013 | probe for FlashPoint Host Adapters first unless the BIOS primary disk is | |
1014 | controlled by the first PCI MultiMaster Host Adapter, in which case | |
1015 | MultiMaster Host Adapters will be probed first. The BusLogic Driver Options | |
1016 | specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force | |
1017 | a particular probe order. | |
1018 | */ | |
1019 | ||
839cb99e | 1020 | static void __init blogic_init_probeinfo_list(struct blogic_adapter *adapter) |
1da177e4 LT |
1021 | { |
1022 | /* | |
839cb99e KA |
1023 | If a PCI BIOS is present, interrogate it for MultiMaster and |
1024 | FlashPoint Host Adapters; otherwise, default to the standard | |
1025 | ISA MultiMaster probe. | |
1026 | */ | |
1027 | if (!blogic_probe_options.noprobe_pci) { | |
1028 | if (blogic_probe_options.multimaster_first) { | |
1029 | blogic_init_mm_probeinfo(adapter); | |
1030 | blogic_init_fp_probeinfo(adapter); | |
1031 | } else if (blogic_probe_options.flashpoint_first) { | |
1032 | blogic_init_fp_probeinfo(adapter); | |
1033 | blogic_init_mm_probeinfo(adapter); | |
1da177e4 | 1034 | } else { |
839cb99e KA |
1035 | int fpcount = blogic_init_fp_probeinfo(adapter); |
1036 | int mmcount = blogic_init_mm_probeinfo(adapter); | |
1037 | if (fpcount > 0 && mmcount > 0) { | |
1038 | struct blogic_probeinfo *probeinfo = | |
1039 | &blogic_probeinfo_list[fpcount]; | |
1040 | struct blogic_adapter *myadapter = adapter; | |
1041 | struct blogic_fetch_localram fetch_localram; | |
1042 | struct blogic_bios_drvmap d0_mapbyte; | |
1043 | ||
1044 | while (probeinfo->adapter_bus_type != | |
1045 | BLOGIC_PCI_BUS) | |
1046 | probeinfo++; | |
1047 | myadapter->io_addr = probeinfo->io_addr; | |
1048 | fetch_localram.offset = | |
1049 | BLOGIC_BIOS_BASE + BLOGIC_BIOS_DRVMAP; | |
1050 | fetch_localram.count = sizeof(d0_mapbyte); | |
1051 | blogic_cmd(myadapter, BLOGIC_FETCH_LOCALRAM, | |
1052 | &fetch_localram, | |
1053 | sizeof(fetch_localram), | |
1054 | &d0_mapbyte, | |
1055 | sizeof(d0_mapbyte)); | |
1da177e4 | 1056 | /* |
839cb99e KA |
1057 | If the Map Byte for BIOS Drive 0 indicates |
1058 | that BIOS Drive 0 is controlled by this | |
1059 | PCI MultiMaster Host Adapter, then reverse | |
1060 | the probe order so that MultiMaster Host | |
1061 | Adapters are probed before FlashPoint Host | |
1062 | Adapters. | |
1da177e4 | 1063 | */ |
839cb99e KA |
1064 | if (d0_mapbyte.diskgeom != BLOGIC_BIOS_NODISK) { |
1065 | struct blogic_probeinfo saved_probeinfo[BLOGIC_MAX_ADAPTERS]; | |
1066 | int mmcount = blogic_probeinfo_count - fpcount; | |
1067 | ||
1068 | memcpy(saved_probeinfo, | |
1069 | blogic_probeinfo_list, | |
1070 | blogic_probeinfo_count * sizeof(struct blogic_probeinfo)); | |
1071 | memcpy(&blogic_probeinfo_list[0], | |
1072 | &saved_probeinfo[fpcount], | |
1073 | mmcount * sizeof(struct blogic_probeinfo)); | |
1074 | memcpy(&blogic_probeinfo_list[mmcount], | |
1075 | &saved_probeinfo[0], | |
1076 | fpcount * sizeof(struct blogic_probeinfo)); | |
1da177e4 LT |
1077 | } |
1078 | } | |
1079 | } | |
839cb99e KA |
1080 | } else { |
1081 | blogic_init_probeinfo_isa(adapter); | |
1082 | } | |
1da177e4 LT |
1083 | } |
1084 | ||
1085 | ||
78b4b05d | 1086 | #else |
839cb99e KA |
1087 | #define blogic_init_probeinfo_list(adapter) \ |
1088 | blogic_init_probeinfo_isa(adapter) | |
1da177e4 LT |
1089 | #endif /* CONFIG_PCI */ |
1090 | ||
1091 | ||
1092 | /* | |
839cb99e | 1093 | blogic_failure prints a standardized error message, and then returns false. |
1da177e4 LT |
1094 | */ |
1095 | ||
839cb99e | 1096 | static bool blogic_failure(struct blogic_adapter *adapter, char *msg) |
1da177e4 | 1097 | { |
839cb99e KA |
1098 | blogic_announce_drvr(adapter); |
1099 | if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) { | |
1100 | blogic_err("While configuring BusLogic PCI Host Adapter at\n", | |
1101 | adapter); | |
1102 | blogic_err("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr); | |
1da177e4 | 1103 | } else |
839cb99e KA |
1104 | blogic_err("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", adapter, adapter->io_addr); |
1105 | blogic_err("%s FAILED - DETACHING\n", adapter, msg); | |
1106 | if (blogic_cmd_failure_reason != NULL) | |
1107 | blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter, | |
1108 | blogic_cmd_failure_reason); | |
1da177e4 LT |
1109 | return false; |
1110 | } | |
1111 | ||
1112 | ||
1113 | /* | |
839cb99e | 1114 | blogic_probe probes for a BusLogic Host Adapter. |
1da177e4 LT |
1115 | */ |
1116 | ||
839cb99e | 1117 | static bool __init blogic_probe(struct blogic_adapter *adapter) |
1da177e4 | 1118 | { |
839cb99e KA |
1119 | union blogic_stat_reg statusreg; |
1120 | union blogic_int_reg intreg; | |
1121 | union blogic_geo_reg georeg; | |
1da177e4 LT |
1122 | /* |
1123 | FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager. | |
1124 | */ | |
839cb99e KA |
1125 | if (blogic_flashpoint_type(adapter)) { |
1126 | struct fpoint_info *fpinfo = &adapter->fpinfo; | |
1127 | fpinfo->base_addr = (u32) adapter->io_addr; | |
1128 | fpinfo->irq_ch = adapter->irq_ch; | |
1129 | fpinfo->present = false; | |
1130 | if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 && | |
1131 | fpinfo->present)) { | |
1132 | blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev); | |
1133 | blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr); | |
1134 | blogic_err("BusLogic: Probe Function failed to validate it.\n", adapter); | |
1da177e4 LT |
1135 | return false; |
1136 | } | |
839cb99e KA |
1137 | if (blogic_global_options.trace_probe) |
1138 | blogic_notice("BusLogic_Probe(0x%X): FlashPoint Found\n", adapter, adapter->io_addr); | |
1da177e4 LT |
1139 | /* |
1140 | Indicate the Host Adapter Probe completed successfully. | |
1141 | */ | |
1142 | return true; | |
1143 | } | |
1144 | /* | |
1145 | Read the Status, Interrupt, and Geometry Registers to test if there are I/O | |
1146 | ports that respond, and to check the values to determine if they are from a | |
1147 | BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which | |
1148 | case there is definitely no BusLogic Host Adapter at this base I/O Address. | |
1149 | The test here is a subset of that used by the BusLogic Host Adapter BIOS. | |
1150 | */ | |
839cb99e KA |
1151 | statusreg.all = blogic_rdstatus(adapter); |
1152 | intreg.all = blogic_rdint(adapter); | |
1153 | georeg.all = blogic_rdgeom(adapter); | |
1154 | if (blogic_global_options.trace_probe) | |
1155 | blogic_notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all); | |
1156 | if (statusreg.all == 0 || statusreg.sr.diag_active || | |
1157 | statusreg.sr.cmd_param_busy || statusreg.sr.rsvd || | |
1158 | statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0) | |
1da177e4 LT |
1159 | return false; |
1160 | /* | |
839cb99e KA |
1161 | Check the undocumented Geometry Register to test if there is |
1162 | an I/O port that responded. Adaptec Host Adapters do not | |
1163 | implement the Geometry Register, so this test helps serve to | |
1164 | avoid incorrectly recognizing an Adaptec 1542A or 1542B as a | |
1165 | BusLogic. Unfortunately, the Adaptec 1542C series does respond | |
1166 | to the Geometry Register I/O port, but it will be rejected | |
1167 | later when the Inquire Extended Setup Information command is | |
1168 | issued in blogic_checkadapter. The AMI FastDisk Host Adapter | |
1169 | is a BusLogic clone that implements the same interface as | |
1170 | earlier BusLogic Host Adapters, including the undocumented | |
1171 | commands, and is therefore supported by this driver. However, | |
1172 | the AMI FastDisk always returns 0x00 upon reading the Geometry | |
1173 | Register, so the extended translation option should always be | |
1174 | left disabled on the AMI FastDisk. | |
1175 | */ | |
1176 | if (georeg.all == 0xFF) | |
1da177e4 LT |
1177 | return false; |
1178 | /* | |
1179 | Indicate the Host Adapter Probe completed successfully. | |
1180 | */ | |
1181 | return true; | |
1182 | } | |
1183 | ||
1184 | ||
1185 | /* | |
839cb99e KA |
1186 | blogic_hwreset issues a Hardware Reset to the Host Adapter |
1187 | and waits for Host Adapter Diagnostics to complete. If hard_reset is true, a | |
1da177e4 LT |
1188 | Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a |
1189 | Soft Reset is performed which only resets the Host Adapter without forcing a | |
1190 | SCSI Bus Reset. | |
1191 | */ | |
1192 | ||
839cb99e | 1193 | static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset) |
1da177e4 | 1194 | { |
839cb99e KA |
1195 | union blogic_stat_reg statusreg; |
1196 | int timeout; | |
1da177e4 | 1197 | /* |
839cb99e KA |
1198 | FlashPoint Host Adapters are Hard Reset by the FlashPoint |
1199 | SCCB Manager. | |
1da177e4 | 1200 | */ |
839cb99e KA |
1201 | if (blogic_flashpoint_type(adapter)) { |
1202 | struct fpoint_info *fpinfo = &adapter->fpinfo; | |
1203 | fpinfo->softreset = !hard_reset; | |
1204 | fpinfo->report_underrun = true; | |
1205 | adapter->cardhandle = | |
1206 | FlashPoint_HardwareResetHostAdapter(fpinfo); | |
391e2f25 | 1207 | if (adapter->cardhandle == (void *)FPOINT_BADCARD_HANDLE) |
1da177e4 LT |
1208 | return false; |
1209 | /* | |
1210 | Indicate the Host Adapter Hard Reset completed successfully. | |
1211 | */ | |
1212 | return true; | |
1213 | } | |
1214 | /* | |
839cb99e KA |
1215 | Issue a Hard Reset or Soft Reset Command to the Host Adapter. |
1216 | The Host Adapter should respond by setting Diagnostic Active in | |
1217 | the Status Register. | |
1da177e4 | 1218 | */ |
839cb99e KA |
1219 | if (hard_reset) |
1220 | blogic_hardreset(adapter); | |
1da177e4 | 1221 | else |
839cb99e | 1222 | blogic_softreset(adapter); |
1da177e4 LT |
1223 | /* |
1224 | Wait until Diagnostic Active is set in the Status Register. | |
1225 | */ | |
839cb99e KA |
1226 | timeout = 5 * 10000; |
1227 | while (--timeout >= 0) { | |
1228 | statusreg.all = blogic_rdstatus(adapter); | |
1229 | if (statusreg.sr.diag_active) | |
1da177e4 LT |
1230 | break; |
1231 | udelay(100); | |
1232 | } | |
839cb99e KA |
1233 | if (blogic_global_options.trace_hw_reset) |
1234 | blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); | |
1235 | if (timeout < 0) | |
1da177e4 LT |
1236 | return false; |
1237 | /* | |
1238 | Wait 100 microseconds to allow completion of any initial diagnostic | |
1239 | activity which might leave the contents of the Status Register | |
1240 | unpredictable. | |
1241 | */ | |
1242 | udelay(100); | |
1243 | /* | |
1244 | Wait until Diagnostic Active is reset in the Status Register. | |
1245 | */ | |
839cb99e KA |
1246 | timeout = 10 * 10000; |
1247 | while (--timeout >= 0) { | |
1248 | statusreg.all = blogic_rdstatus(adapter); | |
1249 | if (!statusreg.sr.diag_active) | |
1da177e4 LT |
1250 | break; |
1251 | udelay(100); | |
1252 | } | |
839cb99e KA |
1253 | if (blogic_global_options.trace_hw_reset) |
1254 | blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); | |
1255 | if (timeout < 0) | |
1da177e4 LT |
1256 | return false; |
1257 | /* | |
839cb99e KA |
1258 | Wait until at least one of the Diagnostic Failure, Host Adapter |
1259 | Ready, or Data In Register Ready bits is set in the Status Register. | |
1da177e4 | 1260 | */ |
839cb99e KA |
1261 | timeout = 10000; |
1262 | while (--timeout >= 0) { | |
1263 | statusreg.all = blogic_rdstatus(adapter); | |
1264 | if (statusreg.sr.diag_failed || statusreg.sr.adapter_ready || | |
1265 | statusreg.sr.datain_ready) | |
1da177e4 LT |
1266 | break; |
1267 | udelay(100); | |
1268 | } | |
839cb99e KA |
1269 | if (blogic_global_options.trace_hw_reset) |
1270 | blogic_notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); | |
1271 | if (timeout < 0) | |
1da177e4 LT |
1272 | return false; |
1273 | /* | |
839cb99e KA |
1274 | If Diagnostic Failure is set or Host Adapter Ready is reset, |
1275 | then an error occurred during the Host Adapter diagnostics. | |
1276 | If Data In Register Ready is set, then there is an Error Code | |
1277 | available. | |
1278 | */ | |
1279 | if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) { | |
1280 | blogic_cmd_failure_reason = NULL; | |
1281 | blogic_failure(adapter, "HARD RESET DIAGNOSTICS"); | |
1282 | blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter, | |
1283 | statusreg.all); | |
1284 | if (statusreg.sr.datain_ready) | |
1285 | blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter, | |
1286 | blogic_rddatain(adapter)); | |
1da177e4 LT |
1287 | return false; |
1288 | } | |
1289 | /* | |
1290 | Indicate the Host Adapter Hard Reset completed successfully. | |
1291 | */ | |
1292 | return true; | |
1293 | } | |
1294 | ||
1295 | ||
1296 | /* | |
839cb99e | 1297 | blogic_checkadapter checks to be sure this really is a BusLogic |
1da177e4 LT |
1298 | Host Adapter. |
1299 | */ | |
1300 | ||
839cb99e | 1301 | static bool __init blogic_checkadapter(struct blogic_adapter *adapter) |
1da177e4 | 1302 | { |
839cb99e KA |
1303 | struct blogic_ext_setup ext_setupinfo; |
1304 | unsigned char req_replylen; | |
1305 | bool result = true; | |
1da177e4 LT |
1306 | /* |
1307 | FlashPoint Host Adapters do not require this protection. | |
1308 | */ | |
839cb99e | 1309 | if (blogic_flashpoint_type(adapter)) |
1da177e4 LT |
1310 | return true; |
1311 | /* | |
839cb99e KA |
1312 | Issue the Inquire Extended Setup Information command. Only genuine |
1313 | BusLogic Host Adapters and true clones support this command. | |
1314 | Adaptec 1542C series Host Adapters that respond to the Geometry | |
1315 | Register I/O port will fail this command. | |
1da177e4 | 1316 | */ |
839cb99e KA |
1317 | req_replylen = sizeof(ext_setupinfo); |
1318 | if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen, | |
1319 | sizeof(req_replylen), &ext_setupinfo, | |
1320 | sizeof(ext_setupinfo)) != sizeof(ext_setupinfo)) | |
1321 | result = false; | |
1da177e4 LT |
1322 | /* |
1323 | Provide tracing information if requested and return. | |
1324 | */ | |
839cb99e KA |
1325 | if (blogic_global_options.trace_probe) |
1326 | blogic_notice("BusLogic_Check(0x%X): MultiMaster %s\n", adapter, | |
1327 | adapter->io_addr, | |
1328 | (result ? "Found" : "Not Found")); | |
1329 | return result; | |
1da177e4 LT |
1330 | } |
1331 | ||
1332 | ||
1333 | /* | |
839cb99e | 1334 | blogic_rdconfig reads the Configuration Information |
1da177e4 LT |
1335 | from Host Adapter and initializes the Host Adapter structure. |
1336 | */ | |
1337 | ||
839cb99e | 1338 | static bool __init blogic_rdconfig(struct blogic_adapter *adapter) |
1da177e4 | 1339 | { |
839cb99e KA |
1340 | struct blogic_board_id id; |
1341 | struct blogic_config config; | |
1342 | struct blogic_setup_info setupinfo; | |
1343 | struct blogic_ext_setup ext_setupinfo; | |
1344 | unsigned char model[5]; | |
1345 | unsigned char fw_ver_digit3; | |
1346 | unsigned char fw_ver_letter; | |
1347 | struct blogic_adapter_info adapter_info; | |
1348 | struct blogic_fetch_localram fetch_localram; | |
1349 | struct blogic_autoscsi autoscsi; | |
1350 | union blogic_geo_reg georeg; | |
1351 | unsigned char req_replylen; | |
1352 | unsigned char *tgt, ch; | |
1353 | int tgt_id, i; | |
1354 | /* | |
1355 | Configuration Information for FlashPoint Host Adapters is | |
1356 | provided in the fpoint_info structure by the FlashPoint | |
1357 | SCCB Manager's Probe Function. Initialize fields in the | |
1358 | Host Adapter structure from the fpoint_info structure. | |
1359 | */ | |
1360 | if (blogic_flashpoint_type(adapter)) { | |
1361 | struct fpoint_info *fpinfo = &adapter->fpinfo; | |
1362 | tgt = adapter->model; | |
1363 | *tgt++ = 'B'; | |
1364 | *tgt++ = 'T'; | |
1365 | *tgt++ = '-'; | |
1366 | for (i = 0; i < sizeof(fpinfo->model); i++) | |
1367 | *tgt++ = fpinfo->model[i]; | |
1368 | *tgt++ = '\0'; | |
1369 | strcpy(adapter->fw_ver, FLASHPOINT_FW_VER); | |
1370 | adapter->scsi_id = fpinfo->scsi_id; | |
1371 | adapter->ext_trans_enable = fpinfo->ext_trans_enable; | |
1372 | adapter->parity = fpinfo->parity; | |
1373 | adapter->reset_enabled = !fpinfo->softreset; | |
1374 | adapter->level_int = true; | |
1375 | adapter->wide = fpinfo->wide; | |
1376 | adapter->differential = false; | |
1377 | adapter->scam = true; | |
1378 | adapter->ultra = true; | |
1379 | adapter->ext_lun = true; | |
1380 | adapter->terminfo_valid = true; | |
1381 | adapter->low_term = fpinfo->low_term; | |
1382 | adapter->high_term = fpinfo->high_term; | |
1383 | adapter->scam_enabled = fpinfo->scam_enabled; | |
1384 | adapter->scam_lev2 = fpinfo->scam_lev2; | |
1385 | adapter->drvr_sglimit = BLOGIC_SG_LIMIT; | |
1386 | adapter->maxdev = (adapter->wide ? 16 : 8); | |
1387 | adapter->maxlun = 32; | |
1388 | adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE; | |
1389 | adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE; | |
1390 | adapter->drvr_qdepth = 255; | |
1391 | adapter->adapter_qdepth = adapter->drvr_qdepth; | |
1392 | adapter->sync_ok = fpinfo->sync_ok; | |
1393 | adapter->fast_ok = fpinfo->fast_ok; | |
1394 | adapter->ultra_ok = fpinfo->ultra_ok; | |
1395 | adapter->wide_ok = fpinfo->wide_ok; | |
1396 | adapter->discon_ok = fpinfo->discon_ok; | |
1397 | adapter->tagq_ok = 0xFFFF; | |
1398 | goto common; | |
1da177e4 LT |
1399 | } |
1400 | /* | |
1401 | Issue the Inquire Board ID command. | |
1402 | */ | |
839cb99e KA |
1403 | if (blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id, |
1404 | sizeof(id)) != sizeof(id)) | |
1405 | return blogic_failure(adapter, "INQUIRE BOARD ID"); | |
1da177e4 LT |
1406 | /* |
1407 | Issue the Inquire Configuration command. | |
1408 | */ | |
839cb99e KA |
1409 | if (blogic_cmd(adapter, BLOGIC_INQ_CONFIG, NULL, 0, &config, |
1410 | sizeof(config)) | |
1411 | != sizeof(config)) | |
1412 | return blogic_failure(adapter, "INQUIRE CONFIGURATION"); | |
1da177e4 LT |
1413 | /* |
1414 | Issue the Inquire Setup Information command. | |
1415 | */ | |
839cb99e KA |
1416 | req_replylen = sizeof(setupinfo); |
1417 | if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen, | |
1418 | sizeof(req_replylen), &setupinfo, | |
1419 | sizeof(setupinfo)) != sizeof(setupinfo)) | |
1420 | return blogic_failure(adapter, "INQUIRE SETUP INFORMATION"); | |
1da177e4 LT |
1421 | /* |
1422 | Issue the Inquire Extended Setup Information command. | |
1423 | */ | |
839cb99e KA |
1424 | req_replylen = sizeof(ext_setupinfo); |
1425 | if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen, | |
1426 | sizeof(req_replylen), &ext_setupinfo, | |
1427 | sizeof(ext_setupinfo)) != sizeof(ext_setupinfo)) | |
1428 | return blogic_failure(adapter, | |
1429 | "INQUIRE EXTENDED SETUP INFORMATION"); | |
1da177e4 LT |
1430 | /* |
1431 | Issue the Inquire Firmware Version 3rd Digit command. | |
1432 | */ | |
839cb99e KA |
1433 | fw_ver_digit3 = '\0'; |
1434 | if (id.fw_ver_digit1 > '0') | |
1435 | if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_D3, NULL, 0, | |
1436 | &fw_ver_digit3, | |
1437 | sizeof(fw_ver_digit3)) != sizeof(fw_ver_digit3)) | |
1438 | return blogic_failure(adapter, | |
1439 | "INQUIRE FIRMWARE 3RD DIGIT"); | |
1da177e4 LT |
1440 | /* |
1441 | Issue the Inquire Host Adapter Model Number command. | |
1442 | */ | |
839cb99e | 1443 | if (ext_setupinfo.bus_type == 'A' && id.fw_ver_digit1 == '2') |
1da177e4 | 1444 | /* BusLogic BT-542B ISA 2.xx */ |
839cb99e KA |
1445 | strcpy(model, "542B"); |
1446 | else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '2' && | |
1447 | (id.fw_ver_digit2 <= '1' || (id.fw_ver_digit2 == '2' && | |
1448 | fw_ver_digit3 == '0'))) | |
1da177e4 | 1449 | /* BusLogic BT-742A EISA 2.1x or 2.20 */ |
839cb99e KA |
1450 | strcpy(model, "742A"); |
1451 | else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '0') | |
1da177e4 | 1452 | /* AMI FastDisk EISA Series 441 0.x */ |
839cb99e | 1453 | strcpy(model, "747A"); |
1da177e4 | 1454 | else { |
839cb99e KA |
1455 | req_replylen = sizeof(model); |
1456 | if (blogic_cmd(adapter, BLOGIC_INQ_MODELNO, &req_replylen, | |
1457 | sizeof(req_replylen), &model, | |
1458 | sizeof(model)) != sizeof(model)) | |
1459 | return blogic_failure(adapter, | |
1460 | "INQUIRE HOST ADAPTER MODEL NUMBER"); | |
1da177e4 LT |
1461 | } |
1462 | /* | |
839cb99e KA |
1463 | BusLogic MultiMaster Host Adapters can be identified by their |
1464 | model number and the major version number of their firmware | |
1465 | as follows: | |
1da177e4 LT |
1466 | |
1467 | 5.xx BusLogic "W" Series Host Adapters: | |
1468 | BT-948/958/958D | |
1469 | 4.xx BusLogic "C" Series Host Adapters: | |
1470 | BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF | |
1471 | 3.xx BusLogic "S" Series Host Adapters: | |
1472 | BT-747S/747D/757S/757D/445S/545S/542D | |
1473 | BT-542B/742A (revision H) | |
1474 | 2.xx BusLogic "A" Series Host Adapters: | |
1475 | BT-542B/742A (revision G and below) | |
1476 | 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter | |
1477 | */ | |
1478 | /* | |
839cb99e KA |
1479 | Save the Model Name and Host Adapter Name in the Host Adapter |
1480 | structure. | |
1da177e4 | 1481 | */ |
839cb99e KA |
1482 | tgt = adapter->model; |
1483 | *tgt++ = 'B'; | |
1484 | *tgt++ = 'T'; | |
1485 | *tgt++ = '-'; | |
1486 | for (i = 0; i < sizeof(model); i++) { | |
1487 | ch = model[i]; | |
1488 | if (ch == ' ' || ch == '\0') | |
1da177e4 | 1489 | break; |
839cb99e | 1490 | *tgt++ = ch; |
1da177e4 | 1491 | } |
839cb99e | 1492 | *tgt++ = '\0'; |
1da177e4 LT |
1493 | /* |
1494 | Save the Firmware Version in the Host Adapter structure. | |
1495 | */ | |
839cb99e KA |
1496 | tgt = adapter->fw_ver; |
1497 | *tgt++ = id.fw_ver_digit1; | |
1498 | *tgt++ = '.'; | |
1499 | *tgt++ = id.fw_ver_digit2; | |
1500 | if (fw_ver_digit3 != ' ' && fw_ver_digit3 != '\0') | |
1501 | *tgt++ = fw_ver_digit3; | |
1502 | *tgt = '\0'; | |
1da177e4 LT |
1503 | /* |
1504 | Issue the Inquire Firmware Version Letter command. | |
1505 | */ | |
839cb99e KA |
1506 | if (strcmp(adapter->fw_ver, "3.3") >= 0) { |
1507 | if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_LETTER, NULL, 0, | |
1508 | &fw_ver_letter, | |
1509 | sizeof(fw_ver_letter)) != sizeof(fw_ver_letter)) | |
1510 | return blogic_failure(adapter, | |
1511 | "INQUIRE FIRMWARE VERSION LETTER"); | |
1512 | if (fw_ver_letter != ' ' && fw_ver_letter != '\0') | |
1513 | *tgt++ = fw_ver_letter; | |
1514 | *tgt = '\0'; | |
1da177e4 LT |
1515 | } |
1516 | /* | |
1517 | Save the Host Adapter SCSI ID in the Host Adapter structure. | |
1518 | */ | |
839cb99e KA |
1519 | adapter->scsi_id = config.id; |
1520 | /* | |
1521 | Determine the Bus Type and save it in the Host Adapter structure, | |
1522 | determine and save the IRQ Channel if necessary, and determine | |
1523 | and save the DMA Channel for ISA Host Adapters. | |
1524 | */ | |
1525 | adapter->adapter_bus_type = | |
1526 | blogic_adater_bus_types[adapter->model[3] - '4']; | |
1527 | if (adapter->irq_ch == 0) { | |
1528 | if (config.irq_ch9) | |
1529 | adapter->irq_ch = 9; | |
1530 | else if (config.irq_ch10) | |
1531 | adapter->irq_ch = 10; | |
1532 | else if (config.irq_ch11) | |
1533 | adapter->irq_ch = 11; | |
1534 | else if (config.irq_ch12) | |
1535 | adapter->irq_ch = 12; | |
1536 | else if (config.irq_ch14) | |
1537 | adapter->irq_ch = 14; | |
1538 | else if (config.irq_ch15) | |
1539 | adapter->irq_ch = 15; | |
1540 | } | |
1541 | if (adapter->adapter_bus_type == BLOGIC_ISA_BUS) { | |
1542 | if (config.dma_ch5) | |
1543 | adapter->dma_ch = 5; | |
1544 | else if (config.dma_ch6) | |
1545 | adapter->dma_ch = 6; | |
1546 | else if (config.dma_ch7) | |
1547 | adapter->dma_ch = 7; | |
1da177e4 LT |
1548 | } |
1549 | /* | |
1550 | Determine whether Extended Translation is enabled and save it in | |
1551 | the Host Adapter structure. | |
1552 | */ | |
839cb99e KA |
1553 | georeg.all = blogic_rdgeom(adapter); |
1554 | adapter->ext_trans_enable = georeg.gr.ext_trans_enable; | |
1da177e4 LT |
1555 | /* |
1556 | Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide | |
1557 | SCSI flag, Differential SCSI flag, SCAM Supported flag, and | |
1558 | Ultra SCSI flag in the Host Adapter structure. | |
1559 | */ | |
839cb99e KA |
1560 | adapter->adapter_sglimit = ext_setupinfo.sg_limit; |
1561 | adapter->drvr_sglimit = adapter->adapter_sglimit; | |
1562 | if (adapter->adapter_sglimit > BLOGIC_SG_LIMIT) | |
1563 | adapter->drvr_sglimit = BLOGIC_SG_LIMIT; | |
1564 | if (ext_setupinfo.misc.level_int) | |
1565 | adapter->level_int = true; | |
1566 | adapter->wide = ext_setupinfo.wide; | |
1567 | adapter->differential = ext_setupinfo.differential; | |
1568 | adapter->scam = ext_setupinfo.scam; | |
1569 | adapter->ultra = ext_setupinfo.ultra; | |
1da177e4 LT |
1570 | /* |
1571 | Determine whether Extended LUN Format CCBs are supported and save the | |
1572 | information in the Host Adapter structure. | |
1573 | */ | |
839cb99e KA |
1574 | if (adapter->fw_ver[0] == '5' || (adapter->fw_ver[0] == '4' && |
1575 | adapter->wide)) | |
1576 | adapter->ext_lun = true; | |
1da177e4 LT |
1577 | /* |
1578 | Issue the Inquire PCI Host Adapter Information command to read the | |
1579 | Termination Information from "W" series MultiMaster Host Adapters. | |
1580 | */ | |
839cb99e KA |
1581 | if (adapter->fw_ver[0] == '5') { |
1582 | if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, | |
1583 | &adapter_info, | |
1584 | sizeof(adapter_info)) != sizeof(adapter_info)) | |
1585 | return blogic_failure(adapter, | |
1586 | "INQUIRE PCI HOST ADAPTER INFORMATION"); | |
1da177e4 | 1587 | /* |
839cb99e KA |
1588 | Save the Termination Information in the Host Adapter |
1589 | structure. | |
1da177e4 | 1590 | */ |
839cb99e KA |
1591 | if (adapter_info.genericinfo_valid) { |
1592 | adapter->terminfo_valid = true; | |
1593 | adapter->low_term = adapter_info.low_term; | |
1594 | adapter->high_term = adapter_info.high_term; | |
1da177e4 LT |
1595 | } |
1596 | } | |
1597 | /* | |
839cb99e KA |
1598 | Issue the Fetch Host Adapter Local RAM command to read the |
1599 | AutoSCSI data from "W" and "C" series MultiMaster Host Adapters. | |
1da177e4 | 1600 | */ |
839cb99e KA |
1601 | if (adapter->fw_ver[0] >= '4') { |
1602 | fetch_localram.offset = BLOGIC_AUTOSCSI_BASE; | |
1603 | fetch_localram.count = sizeof(autoscsi); | |
1604 | if (blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM, &fetch_localram, | |
1605 | sizeof(fetch_localram), &autoscsi, | |
1606 | sizeof(autoscsi)) != sizeof(autoscsi)) | |
1607 | return blogic_failure(adapter, | |
1608 | "FETCH HOST ADAPTER LOCAL RAM"); | |
1da177e4 | 1609 | /* |
839cb99e KA |
1610 | Save the Parity Checking Enabled, Bus Reset Enabled, |
1611 | and Termination Information in the Host Adapter structure. | |
1da177e4 | 1612 | */ |
839cb99e KA |
1613 | adapter->parity = autoscsi.parity; |
1614 | adapter->reset_enabled = autoscsi.reset_enabled; | |
1615 | if (adapter->fw_ver[0] == '4') { | |
1616 | adapter->terminfo_valid = true; | |
1617 | adapter->low_term = autoscsi.low_term; | |
1618 | adapter->high_term = autoscsi.high_term; | |
1da177e4 LT |
1619 | } |
1620 | /* | |
839cb99e KA |
1621 | Save the Wide Permitted, Fast Permitted, Synchronous |
1622 | Permitted, Disconnect Permitted, Ultra Permitted, and | |
1623 | SCAM Information in the Host Adapter structure. | |
1da177e4 | 1624 | */ |
839cb99e KA |
1625 | adapter->wide_ok = autoscsi.wide_ok; |
1626 | adapter->fast_ok = autoscsi.fast_ok; | |
1627 | adapter->sync_ok = autoscsi.sync_ok; | |
1628 | adapter->discon_ok = autoscsi.discon_ok; | |
1629 | if (adapter->ultra) | |
1630 | adapter->ultra_ok = autoscsi.ultra_ok; | |
1631 | if (adapter->scam) { | |
1632 | adapter->scam_enabled = autoscsi.scam_enabled; | |
1633 | adapter->scam_lev2 = autoscsi.scam_lev2; | |
1da177e4 LT |
1634 | } |
1635 | } | |
1636 | /* | |
839cb99e KA |
1637 | Initialize fields in the Host Adapter structure for "S" and "A" |
1638 | series MultiMaster Host Adapters. | |
1da177e4 | 1639 | */ |
839cb99e KA |
1640 | if (adapter->fw_ver[0] < '4') { |
1641 | if (setupinfo.sync) { | |
1642 | adapter->sync_ok = 0xFF; | |
1643 | if (adapter->adapter_bus_type == BLOGIC_EISA_BUS) { | |
1644 | if (ext_setupinfo.misc.fast_on_eisa) | |
1645 | adapter->fast_ok = 0xFF; | |
1646 | if (strcmp(adapter->model, "BT-757") == 0) | |
1647 | adapter->wide_ok = 0xFF; | |
1da177e4 LT |
1648 | } |
1649 | } | |
839cb99e KA |
1650 | adapter->discon_ok = 0xFF; |
1651 | adapter->parity = setupinfo.parity; | |
1652 | adapter->reset_enabled = true; | |
1da177e4 LT |
1653 | } |
1654 | /* | |
839cb99e KA |
1655 | Determine the maximum number of Target IDs and Logical Units |
1656 | supported by this driver for Wide and Narrow Host Adapters. | |
1da177e4 | 1657 | */ |
839cb99e KA |
1658 | adapter->maxdev = (adapter->wide ? 16 : 8); |
1659 | adapter->maxlun = (adapter->ext_lun ? 32 : 8); | |
1da177e4 LT |
1660 | /* |
1661 | Select appropriate values for the Mailbox Count, Driver Queue Depth, | |
839cb99e KA |
1662 | Initial CCBs, and Incremental CCBs variables based on whether |
1663 | or not Strict Round Robin Mode is supported. If Strict Round | |
1664 | Robin Mode is supported, then there is no performance degradation | |
1665 | in using the maximum possible number of Outgoing and Incoming | |
1666 | Mailboxes and allowing the Tagged and Untagged Queue Depths to | |
1667 | determine the actual utilization. If Strict Round Robin Mode is | |
1668 | not supported, then the Host Adapter must scan all the Outgoing | |
1669 | Mailboxes whenever an Outgoing Mailbox entry is made, which can | |
1670 | cause a substantial performance penalty. The host adapters | |
1671 | actually have room to store the following number of CCBs | |
1672 | internally; that is, they can internally queue and manage this | |
1673 | many active commands on the SCSI bus simultaneously. Performance | |
1674 | measurements demonstrate that the Driver Queue Depth should be | |
1675 | set to the Mailbox Count, rather than the Host Adapter Queue | |
1676 | Depth (internal CCB capacity), as it is more efficient to have the | |
1677 | queued commands waiting in Outgoing Mailboxes if necessary than | |
1678 | to block the process in the higher levels of the SCSI Subsystem. | |
1da177e4 LT |
1679 | |
1680 | 192 BT-948/958/958D | |
1681 | 100 BT-946C/956C/956CD/747C/757C/757CD/445C | |
1682 | 50 BT-545C/540CF | |
1683 | 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A | |
1684 | */ | |
839cb99e KA |
1685 | if (adapter->fw_ver[0] == '5') |
1686 | adapter->adapter_qdepth = 192; | |
1687 | else if (adapter->fw_ver[0] == '4') | |
1688 | adapter->adapter_qdepth = (adapter->adapter_bus_type != | |
1689 | BLOGIC_ISA_BUS ? 100 : 50); | |
1da177e4 | 1690 | else |
839cb99e KA |
1691 | adapter->adapter_qdepth = 30; |
1692 | if (strcmp(adapter->fw_ver, "3.31") >= 0) { | |
1693 | adapter->strict_rr = true; | |
1694 | adapter->mbox_count = BLOGIC_MAX_MAILBOX; | |
1da177e4 | 1695 | } else { |
839cb99e KA |
1696 | adapter->strict_rr = false; |
1697 | adapter->mbox_count = 32; | |
1da177e4 | 1698 | } |
839cb99e KA |
1699 | adapter->drvr_qdepth = adapter->mbox_count; |
1700 | adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE; | |
1701 | adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE; | |
1da177e4 | 1702 | /* |
839cb99e KA |
1703 | Tagged Queuing support is available and operates properly on |
1704 | all "W" series MultiMaster Host Adapters, on "C" series | |
1705 | MultiMaster Host Adapters with firmware version 4.22 and above, | |
1706 | and on "S" series MultiMaster Host Adapters with firmware version | |
1707 | 3.35 and above. | |
1da177e4 | 1708 | */ |
839cb99e KA |
1709 | adapter->tagq_ok = 0; |
1710 | switch (adapter->fw_ver[0]) { | |
1da177e4 | 1711 | case '5': |
839cb99e | 1712 | adapter->tagq_ok = 0xFFFF; |
1da177e4 LT |
1713 | break; |
1714 | case '4': | |
839cb99e KA |
1715 | if (strcmp(adapter->fw_ver, "4.22") >= 0) |
1716 | adapter->tagq_ok = 0xFFFF; | |
1da177e4 LT |
1717 | break; |
1718 | case '3': | |
839cb99e KA |
1719 | if (strcmp(adapter->fw_ver, "3.35") >= 0) |
1720 | adapter->tagq_ok = 0xFFFF; | |
1da177e4 LT |
1721 | break; |
1722 | } | |
1723 | /* | |
1724 | Determine the Host Adapter BIOS Address if the BIOS is enabled and | |
1725 | save it in the Host Adapter structure. The BIOS is disabled if the | |
839cb99e | 1726 | bios_addr is 0. |
1da177e4 | 1727 | */ |
839cb99e | 1728 | adapter->bios_addr = ext_setupinfo.bios_addr << 12; |
1da177e4 | 1729 | /* |
839cb99e KA |
1730 | ISA Host Adapters require Bounce Buffers if there is more than |
1731 | 16MB memory. | |
1da177e4 | 1732 | */ |
839cb99e KA |
1733 | if (adapter->adapter_bus_type == BLOGIC_ISA_BUS && |
1734 | (void *) high_memory > (void *) MAX_DMA_ADDRESS) | |
1735 | adapter->need_bouncebuf = true; | |
1da177e4 | 1736 | /* |
839cb99e KA |
1737 | BusLogic BT-445S Host Adapters prior to board revision E have a |
1738 | hardware bug whereby when the BIOS is enabled, transfers to/from | |
1739 | the same address range the BIOS occupies modulo 16MB are handled | |
1740 | incorrectly. Only properly functioning BT-445S Host Adapters | |
1741 | have firmware version 3.37, so require that ISA Bounce Buffers | |
1742 | be used for the buggy BT-445S models if there is more than 16MB | |
1743 | memory. | |
1da177e4 | 1744 | */ |
839cb99e KA |
1745 | if (adapter->bios_addr > 0 && strcmp(adapter->model, "BT-445S") == 0 && |
1746 | strcmp(adapter->fw_ver, "3.37") < 0 && | |
1747 | (void *) high_memory > (void *) MAX_DMA_ADDRESS) | |
1748 | adapter->need_bouncebuf = true; | |
1da177e4 | 1749 | /* |
839cb99e KA |
1750 | Initialize parameters common to MultiMaster and FlashPoint |
1751 | Host Adapters. | |
1da177e4 | 1752 | */ |
839cb99e | 1753 | common: |
1da177e4 LT |
1754 | /* |
1755 | Initialize the Host Adapter Full Model Name from the Model Name. | |
1756 | */ | |
839cb99e KA |
1757 | strcpy(adapter->full_model, "BusLogic "); |
1758 | strcat(adapter->full_model, adapter->model); | |
1da177e4 LT |
1759 | /* |
1760 | Select an appropriate value for the Tagged Queue Depth either from a | |
1761 | BusLogic Driver Options specification, or based on whether this Host | |
839cb99e KA |
1762 | Adapter requires that ISA Bounce Buffers be used. The Tagged Queue |
1763 | Depth is left at 0 for automatic determination in | |
1764 | BusLogic_SelectQueueDepths. Initialize the Untagged Queue Depth. | |
1765 | */ | |
1766 | for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) { | |
1767 | unsigned char qdepth = 0; | |
1768 | if (adapter->drvr_opts != NULL && | |
1769 | adapter->drvr_opts->qdepth[tgt_id] > 0) | |
1770 | qdepth = adapter->drvr_opts->qdepth[tgt_id]; | |
1771 | else if (adapter->need_bouncebuf) | |
1772 | qdepth = BLOGIC_TAG_DEPTH_BB; | |
1773 | adapter->qdepth[tgt_id] = qdepth; | |
1774 | } | |
1775 | if (adapter->need_bouncebuf) | |
1776 | adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH_BB; | |
1da177e4 | 1777 | else |
839cb99e KA |
1778 | adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH; |
1779 | if (adapter->drvr_opts != NULL) | |
1780 | adapter->common_qdepth = adapter->drvr_opts->common_qdepth; | |
1781 | if (adapter->common_qdepth > 0 && | |
1782 | adapter->common_qdepth < adapter->untag_qdepth) | |
1783 | adapter->untag_qdepth = adapter->common_qdepth; | |
1da177e4 LT |
1784 | /* |
1785 | Tagged Queuing is only allowed if Disconnect/Reconnect is permitted. | |
1786 | Therefore, mask the Tagged Queuing Permitted Default bits with the | |
1787 | Disconnect/Reconnect Permitted bits. | |
1788 | */ | |
839cb99e | 1789 | adapter->tagq_ok &= adapter->discon_ok; |
1da177e4 | 1790 | /* |
839cb99e KA |
1791 | Combine the default Tagged Queuing Permitted bits with any |
1792 | BusLogic Driver Options Tagged Queuing specification. | |
1da177e4 | 1793 | */ |
839cb99e KA |
1794 | if (adapter->drvr_opts != NULL) |
1795 | adapter->tagq_ok = (adapter->drvr_opts->tagq_ok & | |
1796 | adapter->drvr_opts->tagq_ok_mask) | | |
1797 | (adapter->tagq_ok & ~adapter->drvr_opts->tagq_ok_mask); | |
1da177e4 LT |
1798 | |
1799 | /* | |
839cb99e KA |
1800 | Select an appropriate value for Bus Settle Time either from a |
1801 | BusLogic Driver Options specification, or from | |
1802 | BLOGIC_BUS_SETTLE_TIME. | |
1da177e4 | 1803 | */ |
839cb99e KA |
1804 | if (adapter->drvr_opts != NULL && |
1805 | adapter->drvr_opts->bus_settle_time > 0) | |
1806 | adapter->bus_settle_time = adapter->drvr_opts->bus_settle_time; | |
1da177e4 | 1807 | else |
839cb99e | 1808 | adapter->bus_settle_time = BLOGIC_BUS_SETTLE_TIME; |
1da177e4 | 1809 | /* |
839cb99e KA |
1810 | Indicate reading the Host Adapter Configuration completed |
1811 | successfully. | |
1da177e4 LT |
1812 | */ |
1813 | return true; | |
1814 | } | |
1815 | ||
1816 | ||
1817 | /* | |
839cb99e | 1818 | blogic_reportconfig reports the configuration of Host Adapter. |
1da177e4 LT |
1819 | */ |
1820 | ||
839cb99e | 1821 | static bool __init blogic_reportconfig(struct blogic_adapter *adapter) |
1da177e4 | 1822 | { |
839cb99e KA |
1823 | unsigned short alltgt_mask = (1 << adapter->maxdev) - 1; |
1824 | unsigned short sync_ok, fast_ok; | |
1825 | unsigned short ultra_ok, wide_ok; | |
1826 | unsigned short discon_ok, tagq_ok; | |
1827 | bool common_syncneg, common_tagq_depth; | |
1828 | char syncstr[BLOGIC_MAXDEV + 1]; | |
1829 | char widestr[BLOGIC_MAXDEV + 1]; | |
1830 | char discon_str[BLOGIC_MAXDEV + 1]; | |
1831 | char tagq_str[BLOGIC_MAXDEV + 1]; | |
1832 | char *syncmsg = syncstr; | |
1833 | char *widemsg = widestr; | |
1834 | char *discon_msg = discon_str; | |
1835 | char *tagq_msg = tagq_str; | |
1836 | int tgt_id; | |
1837 | ||
1838 | blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : "")); | |
1839 | blogic_info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge")); | |
1840 | if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) { | |
1841 | blogic_info(" DMA Channel: ", adapter); | |
1842 | if (adapter->dma_ch > 0) | |
1843 | blogic_info("%d, ", adapter, adapter->dma_ch); | |
1da177e4 | 1844 | else |
839cb99e KA |
1845 | blogic_info("None, ", adapter); |
1846 | if (adapter->bios_addr > 0) | |
1847 | blogic_info("BIOS Address: 0x%X, ", adapter, | |
1848 | adapter->bios_addr); | |
1da177e4 | 1849 | else |
839cb99e | 1850 | blogic_info("BIOS Address: None, ", adapter); |
1da177e4 | 1851 | } else { |
839cb99e KA |
1852 | blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter, |
1853 | adapter->bus, adapter->dev); | |
1854 | if (adapter->pci_addr > 0) | |
1855 | blogic_info("0x%X, ", adapter, adapter->pci_addr); | |
1da177e4 | 1856 | else |
839cb99e KA |
1857 | blogic_info("Unassigned, ", adapter); |
1858 | } | |
1859 | blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id); | |
1860 | blogic_info(" Parity Checking: %s, Extended Translation: %s\n", | |
1861 | adapter, (adapter->parity ? "Enabled" : "Disabled"), | |
1862 | (adapter->ext_trans_enable ? "Enabled" : "Disabled")); | |
1863 | alltgt_mask &= ~(1 << adapter->scsi_id); | |
1864 | sync_ok = adapter->sync_ok & alltgt_mask; | |
1865 | fast_ok = adapter->fast_ok & alltgt_mask; | |
1866 | ultra_ok = adapter->ultra_ok & alltgt_mask; | |
1867 | if ((blogic_multimaster_type(adapter) && | |
1868 | (adapter->fw_ver[0] >= '4' || | |
1869 | adapter->adapter_bus_type == BLOGIC_EISA_BUS)) || | |
1870 | blogic_flashpoint_type(adapter)) { | |
1871 | common_syncneg = false; | |
1872 | if (sync_ok == 0) { | |
1873 | syncmsg = "Disabled"; | |
1874 | common_syncneg = true; | |
1875 | } else if (sync_ok == alltgt_mask) { | |
1876 | if (fast_ok == 0) { | |
1877 | syncmsg = "Slow"; | |
1878 | common_syncneg = true; | |
1879 | } else if (fast_ok == alltgt_mask) { | |
1880 | if (ultra_ok == 0) { | |
1881 | syncmsg = "Fast"; | |
1882 | common_syncneg = true; | |
1883 | } else if (ultra_ok == alltgt_mask) { | |
1884 | syncmsg = "Ultra"; | |
1885 | common_syncneg = true; | |
1da177e4 LT |
1886 | } |
1887 | } | |
1888 | } | |
839cb99e KA |
1889 | if (!common_syncneg) { |
1890 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
1891 | syncstr[tgt_id] = ((!(sync_ok & (1 << tgt_id))) ? 'N' : (!(fast_ok & (1 << tgt_id)) ? 'S' : (!(ultra_ok & (1 << tgt_id)) ? 'F' : 'U'))); | |
1892 | syncstr[adapter->scsi_id] = '#'; | |
1893 | syncstr[adapter->maxdev] = '\0'; | |
1da177e4 LT |
1894 | } |
1895 | } else | |
839cb99e KA |
1896 | syncmsg = (sync_ok == 0 ? "Disabled" : "Enabled"); |
1897 | wide_ok = adapter->wide_ok & alltgt_mask; | |
1898 | if (wide_ok == 0) | |
1899 | widemsg = "Disabled"; | |
1900 | else if (wide_ok == alltgt_mask) | |
1901 | widemsg = "Enabled"; | |
1da177e4 | 1902 | else { |
839cb99e KA |
1903 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) |
1904 | widestr[tgt_id] = ((wide_ok & (1 << tgt_id)) ? 'Y' : 'N'); | |
1905 | widestr[adapter->scsi_id] = '#'; | |
1906 | widestr[adapter->maxdev] = '\0'; | |
1907 | } | |
1908 | discon_ok = adapter->discon_ok & alltgt_mask; | |
1909 | if (discon_ok == 0) | |
1910 | discon_msg = "Disabled"; | |
1911 | else if (discon_ok == alltgt_mask) | |
1912 | discon_msg = "Enabled"; | |
1da177e4 | 1913 | else { |
839cb99e KA |
1914 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) |
1915 | discon_str[tgt_id] = ((discon_ok & (1 << tgt_id)) ? 'Y' : 'N'); | |
1916 | discon_str[adapter->scsi_id] = '#'; | |
1917 | discon_str[adapter->maxdev] = '\0'; | |
1918 | } | |
1919 | tagq_ok = adapter->tagq_ok & alltgt_mask; | |
1920 | if (tagq_ok == 0) | |
1921 | tagq_msg = "Disabled"; | |
1922 | else if (tagq_ok == alltgt_mask) | |
1923 | tagq_msg = "Enabled"; | |
1da177e4 | 1924 | else { |
839cb99e KA |
1925 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) |
1926 | tagq_str[tgt_id] = ((tagq_ok & (1 << tgt_id)) ? 'Y' : 'N'); | |
1927 | tagq_str[adapter->scsi_id] = '#'; | |
1928 | tagq_str[adapter->maxdev] = '\0'; | |
1929 | } | |
1930 | blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n", | |
1931 | adapter, syncmsg, widemsg); | |
1932 | blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter, | |
1933 | discon_msg, tagq_msg); | |
1934 | if (blogic_multimaster_type(adapter)) { | |
1935 | blogic_info(" Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit, adapter->mbox_count); | |
1936 | blogic_info(" Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth); | |
1da177e4 | 1937 | } else |
839cb99e KA |
1938 | blogic_info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit); |
1939 | blogic_info(" Tagged Queue Depth: ", adapter); | |
1940 | common_tagq_depth = true; | |
1941 | for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++) | |
1942 | if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) { | |
1943 | common_tagq_depth = false; | |
1da177e4 LT |
1944 | break; |
1945 | } | |
839cb99e KA |
1946 | if (common_tagq_depth) { |
1947 | if (adapter->qdepth[0] > 0) | |
1948 | blogic_info("%d", adapter, adapter->qdepth[0]); | |
1da177e4 | 1949 | else |
839cb99e | 1950 | blogic_info("Automatic", adapter); |
1da177e4 | 1951 | } else |
839cb99e KA |
1952 | blogic_info("Individual", adapter); |
1953 | blogic_info(", Untagged Queue Depth: %d\n", adapter, | |
1954 | adapter->untag_qdepth); | |
1955 | if (adapter->terminfo_valid) { | |
1956 | if (adapter->wide) | |
1957 | blogic_info(" SCSI Bus Termination: %s", adapter, | |
1958 | (adapter->low_term ? (adapter->high_term ? "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" : "Both Disabled"))); | |
1da177e4 | 1959 | else |
839cb99e KA |
1960 | blogic_info(" SCSI Bus Termination: %s", adapter, |
1961 | (adapter->low_term ? "Enabled" : "Disabled")); | |
1962 | if (adapter->scam) | |
1963 | blogic_info(", SCAM: %s", adapter, | |
1964 | (adapter->scam_enabled ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1") : "Disabled")); | |
1965 | blogic_info("\n", adapter); | |
1da177e4 LT |
1966 | } |
1967 | /* | |
839cb99e KA |
1968 | Indicate reporting the Host Adapter configuration completed |
1969 | successfully. | |
1da177e4 LT |
1970 | */ |
1971 | return true; | |
1972 | } | |
1973 | ||
1974 | ||
1975 | /* | |
839cb99e | 1976 | blogic_getres acquires the system resources necessary to use |
1da177e4 LT |
1977 | Host Adapter. |
1978 | */ | |
1979 | ||
839cb99e | 1980 | static bool __init blogic_getres(struct blogic_adapter *adapter) |
1da177e4 | 1981 | { |
839cb99e KA |
1982 | if (adapter->irq_ch == 0) { |
1983 | blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", | |
1984 | adapter); | |
1da177e4 LT |
1985 | return false; |
1986 | } | |
1987 | /* | |
1988 | Acquire shared access to the IRQ Channel. | |
1989 | */ | |
839cb99e KA |
1990 | if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED, |
1991 | adapter->full_model, adapter) < 0) { | |
1992 | blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", | |
1993 | adapter, adapter->irq_ch); | |
1da177e4 LT |
1994 | return false; |
1995 | } | |
839cb99e | 1996 | adapter->irq_acquired = true; |
1da177e4 LT |
1997 | /* |
1998 | Acquire exclusive access to the DMA Channel. | |
1999 | */ | |
839cb99e KA |
2000 | if (adapter->dma_ch > 0) { |
2001 | if (request_dma(adapter->dma_ch, adapter->full_model) < 0) { | |
2002 | blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", adapter, adapter->dma_ch); | |
1da177e4 LT |
2003 | return false; |
2004 | } | |
839cb99e KA |
2005 | set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE); |
2006 | enable_dma(adapter->dma_ch); | |
2007 | adapter->dma_chan_acquired = true; | |
1da177e4 LT |
2008 | } |
2009 | /* | |
2010 | Indicate the System Resource Acquisition completed successfully, | |
2011 | */ | |
2012 | return true; | |
2013 | } | |
2014 | ||
2015 | ||
2016 | /* | |
839cb99e KA |
2017 | blogic_relres releases any system resources previously acquired |
2018 | by blogic_getres. | |
1da177e4 LT |
2019 | */ |
2020 | ||
839cb99e | 2021 | static void blogic_relres(struct blogic_adapter *adapter) |
1da177e4 LT |
2022 | { |
2023 | /* | |
2024 | Release shared access to the IRQ Channel. | |
2025 | */ | |
839cb99e KA |
2026 | if (adapter->irq_acquired) |
2027 | free_irq(adapter->irq_ch, adapter); | |
1da177e4 LT |
2028 | /* |
2029 | Release exclusive access to the DMA Channel. | |
2030 | */ | |
839cb99e KA |
2031 | if (adapter->dma_chan_acquired) |
2032 | free_dma(adapter->dma_ch); | |
1da177e4 LT |
2033 | /* |
2034 | Release any allocated memory structs not released elsewhere | |
2035 | */ | |
839cb99e | 2036 | if (adapter->mbox_space) |
17a361b2 | 2037 | dma_free_coherent(&adapter->pci_device->dev, adapter->mbox_sz, |
839cb99e KA |
2038 | adapter->mbox_space, adapter->mbox_space_handle); |
2039 | pci_dev_put(adapter->pci_device); | |
2040 | adapter->mbox_space = NULL; | |
2041 | adapter->mbox_space_handle = 0; | |
2042 | adapter->mbox_sz = 0; | |
1da177e4 LT |
2043 | } |
2044 | ||
2045 | ||
2046 | /* | |
839cb99e | 2047 | blogic_initadapter initializes Host Adapter. This is the only |
1da177e4 LT |
2048 | function called during SCSI Host Adapter detection which modifies the state |
2049 | of the Host Adapter from its initial power on or hard reset state. | |
2050 | */ | |
2051 | ||
839cb99e | 2052 | static bool blogic_initadapter(struct blogic_adapter *adapter) |
1da177e4 | 2053 | { |
839cb99e KA |
2054 | struct blogic_extmbox_req extmbox_req; |
2055 | enum blogic_rr_req rr_req; | |
2056 | enum blogic_setccb_fmt setccb_fmt; | |
2057 | int tgt_id; | |
2058 | ||
1da177e4 | 2059 | /* |
839cb99e KA |
2060 | Initialize the pointers to the first and last CCBs that are |
2061 | queued for completion processing. | |
1da177e4 | 2062 | */ |
839cb99e KA |
2063 | adapter->firstccb = NULL; |
2064 | adapter->lastccb = NULL; | |
2065 | ||
1da177e4 LT |
2066 | /* |
2067 | Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active, | |
2068 | Command Successful Flag, Active Commands, and Commands Since Reset | |
2069 | for each Target Device. | |
2070 | */ | |
839cb99e KA |
2071 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) { |
2072 | adapter->bdr_pend[tgt_id] = NULL; | |
2073 | adapter->tgt_flags[tgt_id].tagq_active = false; | |
2074 | adapter->tgt_flags[tgt_id].cmd_good = false; | |
2075 | adapter->active_cmds[tgt_id] = 0; | |
2076 | adapter->cmds_since_rst[tgt_id] = 0; | |
1da177e4 | 2077 | } |
839cb99e | 2078 | |
1da177e4 LT |
2079 | /* |
2080 | FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes. | |
2081 | */ | |
839cb99e KA |
2082 | if (blogic_flashpoint_type(adapter)) |
2083 | goto done; | |
2084 | ||
1da177e4 LT |
2085 | /* |
2086 | Initialize the Outgoing and Incoming Mailbox pointers. | |
2087 | */ | |
839cb99e | 2088 | adapter->mbox_sz = adapter->mbox_count * (sizeof(struct blogic_outbox) + sizeof(struct blogic_inbox)); |
17a361b2 CH |
2089 | adapter->mbox_space = dma_alloc_coherent(&adapter->pci_device->dev, |
2090 | adapter->mbox_sz, &adapter->mbox_space_handle, | |
2091 | GFP_KERNEL); | |
839cb99e KA |
2092 | if (adapter->mbox_space == NULL) |
2093 | return blogic_failure(adapter, "MAILBOX ALLOCATION"); | |
2094 | adapter->first_outbox = (struct blogic_outbox *) adapter->mbox_space; | |
2095 | adapter->last_outbox = adapter->first_outbox + adapter->mbox_count - 1; | |
2096 | adapter->next_outbox = adapter->first_outbox; | |
2097 | adapter->first_inbox = (struct blogic_inbox *) (adapter->last_outbox + 1); | |
2098 | adapter->last_inbox = adapter->first_inbox + adapter->mbox_count - 1; | |
2099 | adapter->next_inbox = adapter->first_inbox; | |
1da177e4 LT |
2100 | |
2101 | /* | |
2102 | Initialize the Outgoing and Incoming Mailbox structures. | |
2103 | */ | |
839cb99e KA |
2104 | memset(adapter->first_outbox, 0, |
2105 | adapter->mbox_count * sizeof(struct blogic_outbox)); | |
2106 | memset(adapter->first_inbox, 0, | |
2107 | adapter->mbox_count * sizeof(struct blogic_inbox)); | |
2108 | ||
1da177e4 | 2109 | /* |
839cb99e KA |
2110 | Initialize the Host Adapter's Pointer to the Outgoing/Incoming |
2111 | Mailboxes. | |
1da177e4 | 2112 | */ |
839cb99e KA |
2113 | extmbox_req.mbox_count = adapter->mbox_count; |
2114 | extmbox_req.base_mbox_addr = (u32) adapter->mbox_space_handle; | |
2115 | if (blogic_cmd(adapter, BLOGIC_INIT_EXT_MBOX, &extmbox_req, | |
2116 | sizeof(extmbox_req), NULL, 0) < 0) | |
2117 | return blogic_failure(adapter, "MAILBOX INITIALIZATION"); | |
1da177e4 | 2118 | /* |
839cb99e KA |
2119 | Enable Strict Round Robin Mode if supported by the Host Adapter. In |
2120 | Strict Round Robin Mode, the Host Adapter only looks at the next | |
2121 | Outgoing Mailbox for each new command, rather than scanning | |
2122 | through all the Outgoing Mailboxes to find any that have new | |
2123 | commands in them. Strict Round Robin Mode is significantly more | |
2124 | efficient. | |
1da177e4 | 2125 | */ |
839cb99e KA |
2126 | if (adapter->strict_rr) { |
2127 | rr_req = BLOGIC_STRICT_RR_MODE; | |
2128 | if (blogic_cmd(adapter, BLOGIC_STRICT_RR, &rr_req, | |
2129 | sizeof(rr_req), NULL, 0) < 0) | |
2130 | return blogic_failure(adapter, | |
2131 | "ENABLE STRICT ROUND ROBIN MODE"); | |
1da177e4 | 2132 | } |
839cb99e | 2133 | |
1da177e4 | 2134 | /* |
839cb99e KA |
2135 | For Host Adapters that support Extended LUN Format CCBs, issue the |
2136 | Set CCB Format command to allow 32 Logical Units per Target Device. | |
1da177e4 | 2137 | */ |
839cb99e KA |
2138 | if (adapter->ext_lun) { |
2139 | setccb_fmt = BLOGIC_EXT_LUN_CCB; | |
2140 | if (blogic_cmd(adapter, BLOGIC_SETCCB_FMT, &setccb_fmt, | |
2141 | sizeof(setccb_fmt), NULL, 0) < 0) | |
2142 | return blogic_failure(adapter, "SET CCB FORMAT"); | |
1da177e4 | 2143 | } |
839cb99e | 2144 | |
1da177e4 LT |
2145 | /* |
2146 | Announce Successful Initialization. | |
2147 | */ | |
839cb99e KA |
2148 | done: |
2149 | if (!adapter->adapter_initd) { | |
2150 | blogic_info("*** %s Initialized Successfully ***\n", adapter, | |
2151 | adapter->full_model); | |
2152 | blogic_info("\n", adapter); | |
1da177e4 | 2153 | } else |
839cb99e KA |
2154 | blogic_warn("*** %s Initialized Successfully ***\n", adapter, |
2155 | adapter->full_model); | |
2156 | adapter->adapter_initd = true; | |
2157 | ||
1da177e4 LT |
2158 | /* |
2159 | Indicate the Host Adapter Initialization completed successfully. | |
2160 | */ | |
2161 | return true; | |
2162 | } | |
2163 | ||
2164 | ||
2165 | /* | |
839cb99e | 2166 | blogic_inquiry inquires about the Target Devices accessible |
1da177e4 LT |
2167 | through Host Adapter. |
2168 | */ | |
2169 | ||
839cb99e | 2170 | static bool __init blogic_inquiry(struct blogic_adapter *adapter) |
1da177e4 | 2171 | { |
839cb99e KA |
2172 | u16 installed_devs; |
2173 | u8 installed_devs0to7[8]; | |
2174 | struct blogic_setup_info setupinfo; | |
2175 | u8 sync_period[BLOGIC_MAXDEV]; | |
2176 | unsigned char req_replylen; | |
2177 | int tgt_id; | |
2178 | ||
1da177e4 | 2179 | /* |
839cb99e KA |
2180 | Wait a few seconds between the Host Adapter Hard Reset which |
2181 | initiates a SCSI Bus Reset and issuing any SCSI Commands. Some | |
2182 | SCSI devices get confused if they receive SCSI Commands too soon | |
2183 | after a SCSI Bus Reset. | |
1da177e4 | 2184 | */ |
839cb99e | 2185 | blogic_delay(adapter->bus_settle_time); |
1da177e4 LT |
2186 | /* |
2187 | FlashPoint Host Adapters do not provide for Target Device Inquiry. | |
2188 | */ | |
839cb99e | 2189 | if (blogic_flashpoint_type(adapter)) |
1da177e4 LT |
2190 | return true; |
2191 | /* | |
2192 | Inhibit the Target Device Inquiry if requested. | |
2193 | */ | |
839cb99e | 2194 | if (adapter->drvr_opts != NULL && adapter->drvr_opts->stop_tgt_inquiry) |
1da177e4 LT |
2195 | return true; |
2196 | /* | |
839cb99e KA |
2197 | Issue the Inquire Target Devices command for host adapters with |
2198 | firmware version 4.25 or later, or the Inquire Installed Devices | |
2199 | ID 0 to 7 command for older host adapters. This is necessary to | |
2200 | force Synchronous Transfer Negotiation so that the Inquire Setup | |
2201 | Information and Inquire Synchronous Period commands will return | |
2202 | valid data. The Inquire Target Devices command is preferable to | |
2203 | Inquire Installed Devices ID 0 to 7 since it only probes Logical | |
2204 | Unit 0 of each Target Device. | |
1da177e4 | 2205 | */ |
839cb99e | 2206 | if (strcmp(adapter->fw_ver, "4.25") >= 0) { |
1da177e4 LT |
2207 | |
2208 | /* | |
839cb99e KA |
2209 | Issue a Inquire Target Devices command. Inquire Target |
2210 | Devices only tests Logical Unit 0 of each Target Device | |
2211 | unlike the Inquire Installed Devices commands which test | |
2212 | Logical Units 0 - 7. Two bytes are returned, where byte | |
2213 | 0 bit 0 set indicates that Target Device 0 exists, and so on. | |
1da177e4 LT |
2214 | */ |
2215 | ||
839cb99e KA |
2216 | if (blogic_cmd(adapter, BLOGIC_INQ_DEV, NULL, 0, |
2217 | &installed_devs, sizeof(installed_devs)) | |
2218 | != sizeof(installed_devs)) | |
2219 | return blogic_failure(adapter, "INQUIRE TARGET DEVICES"); | |
2220 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
2221 | adapter->tgt_flags[tgt_id].tgt_exists = | |
2222 | (installed_devs & (1 << tgt_id) ? true : false); | |
1da177e4 LT |
2223 | } else { |
2224 | ||
2225 | /* | |
839cb99e KA |
2226 | Issue an Inquire Installed Devices command. For each |
2227 | Target Device, a byte is returned where bit 0 set | |
2228 | indicates that Logical Unit 0 * exists, bit 1 set | |
2229 | indicates that Logical Unit 1 exists, and so on. | |
1da177e4 LT |
2230 | */ |
2231 | ||
839cb99e KA |
2232 | if (blogic_cmd(adapter, BLOGIC_INQ_DEV0TO7, NULL, 0, |
2233 | &installed_devs0to7, sizeof(installed_devs0to7)) | |
2234 | != sizeof(installed_devs0to7)) | |
2235 | return blogic_failure(adapter, | |
2236 | "INQUIRE INSTALLED DEVICES ID 0 TO 7"); | |
2237 | for (tgt_id = 0; tgt_id < 8; tgt_id++) | |
2238 | adapter->tgt_flags[tgt_id].tgt_exists = | |
2239 | (installed_devs0to7[tgt_id] != 0 ? true : false); | |
1da177e4 LT |
2240 | } |
2241 | /* | |
2242 | Issue the Inquire Setup Information command. | |
2243 | */ | |
839cb99e KA |
2244 | req_replylen = sizeof(setupinfo); |
2245 | if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen, | |
2246 | sizeof(req_replylen), &setupinfo, sizeof(setupinfo)) | |
2247 | != sizeof(setupinfo)) | |
2248 | return blogic_failure(adapter, "INQUIRE SETUP INFORMATION"); | |
2249 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
2250 | adapter->sync_offset[tgt_id] = (tgt_id < 8 ? setupinfo.sync0to7[tgt_id].offset : setupinfo.sync8to15[tgt_id - 8].offset); | |
2251 | if (strcmp(adapter->fw_ver, "5.06L") >= 0) | |
2252 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
2253 | adapter->tgt_flags[tgt_id].wide_active = (tgt_id < 8 ? (setupinfo.wide_tx_active0to7 & (1 << tgt_id) ? true : false) : (setupinfo.wide_tx_active8to15 & (1 << (tgt_id - 8)) ? true : false)); | |
1da177e4 LT |
2254 | /* |
2255 | Issue the Inquire Synchronous Period command. | |
2256 | */ | |
839cb99e | 2257 | if (adapter->fw_ver[0] >= '3') { |
1da177e4 | 2258 | |
839cb99e KA |
2259 | /* Issue a Inquire Synchronous Period command. For each |
2260 | Target Device, a byte is returned which represents the | |
2261 | Synchronous Transfer Period in units of 10 nanoseconds. | |
1da177e4 LT |
2262 | */ |
2263 | ||
839cb99e KA |
2264 | req_replylen = sizeof(sync_period); |
2265 | if (blogic_cmd(adapter, BLOGIC_INQ_SYNC_PERIOD, &req_replylen, | |
2266 | sizeof(req_replylen), &sync_period, | |
2267 | sizeof(sync_period)) != sizeof(sync_period)) | |
2268 | return blogic_failure(adapter, | |
2269 | "INQUIRE SYNCHRONOUS PERIOD"); | |
2270 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
2271 | adapter->sync_period[tgt_id] = sync_period[tgt_id]; | |
1da177e4 | 2272 | } else |
839cb99e KA |
2273 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) |
2274 | if (setupinfo.sync0to7[tgt_id].offset > 0) | |
2275 | adapter->sync_period[tgt_id] = 20 + 5 * setupinfo.sync0to7[tgt_id].tx_period; | |
1da177e4 LT |
2276 | /* |
2277 | Indicate the Target Device Inquiry completed successfully. | |
2278 | */ | |
2279 | return true; | |
2280 | } | |
2281 | ||
2282 | /* | |
839cb99e | 2283 | blogic_inithoststruct initializes the fields in the SCSI Host |
1da177e4 LT |
2284 | structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the |
2285 | SCSI Host structure are intentionally left uninitialized, as this driver | |
2286 | handles acquisition and release of these resources explicitly, as well as | |
2287 | ensuring exclusive access to the Host Adapter hardware and data structures | |
2288 | through explicit acquisition and release of the Host Adapter's Lock. | |
2289 | */ | |
2290 | ||
839cb99e KA |
2291 | static void __init blogic_inithoststruct(struct blogic_adapter *adapter, |
2292 | struct Scsi_Host *host) | |
1da177e4 | 2293 | { |
839cb99e KA |
2294 | host->max_id = adapter->maxdev; |
2295 | host->max_lun = adapter->maxlun; | |
2296 | host->max_channel = 0; | |
2297 | host->unique_id = adapter->io_addr; | |
2298 | host->this_id = adapter->scsi_id; | |
2299 | host->can_queue = adapter->drvr_qdepth; | |
2300 | host->sg_tablesize = adapter->drvr_sglimit; | |
2301 | host->unchecked_isa_dma = adapter->need_bouncebuf; | |
2302 | host->cmd_per_lun = adapter->untag_qdepth; | |
1da177e4 LT |
2303 | } |
2304 | ||
2305 | /* | |
839cb99e | 2306 | blogic_slaveconfig will actually set the queue depth on individual |
1da177e4 LT |
2307 | scsi devices as they are permanently added to the device chain. We |
2308 | shamelessly rip off the SelectQueueDepths code to make this work mostly | |
2309 | like it used to. Since we don't get called once at the end of the scan | |
2310 | but instead get called for each device, we have to do things a bit | |
2311 | differently. | |
2312 | */ | |
839cb99e | 2313 | static int blogic_slaveconfig(struct scsi_device *dev) |
1da177e4 | 2314 | { |
839cb99e KA |
2315 | struct blogic_adapter *adapter = |
2316 | (struct blogic_adapter *) dev->host->hostdata; | |
2317 | int tgt_id = dev->id; | |
2318 | int qdepth = adapter->qdepth[tgt_id]; | |
2319 | ||
2320 | if (adapter->tgt_flags[tgt_id].tagq_ok && | |
2321 | (adapter->tagq_ok & (1 << tgt_id))) { | |
2322 | if (qdepth == 0) | |
2323 | qdepth = BLOGIC_MAX_AUTO_TAG_DEPTH; | |
2324 | adapter->qdepth[tgt_id] = qdepth; | |
db5ed4df | 2325 | scsi_change_queue_depth(dev, qdepth); |
1da177e4 | 2326 | } else { |
839cb99e KA |
2327 | adapter->tagq_ok &= ~(1 << tgt_id); |
2328 | qdepth = adapter->untag_qdepth; | |
2329 | adapter->qdepth[tgt_id] = qdepth; | |
db5ed4df | 2330 | scsi_change_queue_depth(dev, qdepth); |
839cb99e KA |
2331 | } |
2332 | qdepth = 0; | |
2333 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) | |
2334 | if (adapter->tgt_flags[tgt_id].tgt_exists) | |
2335 | qdepth += adapter->qdepth[tgt_id]; | |
2336 | if (qdepth > adapter->alloc_ccbs) | |
2337 | blogic_create_addlccbs(adapter, qdepth - adapter->alloc_ccbs, | |
2338 | false); | |
1da177e4 LT |
2339 | return 0; |
2340 | } | |
2341 | ||
2342 | /* | |
839cb99e | 2343 | blogic_init probes for BusLogic Host Adapters at the standard |
1da177e4 LT |
2344 | I/O Addresses where they may be located, initializing, registering, and |
2345 | reporting the configuration of each BusLogic Host Adapter it finds. It | |
2346 | returns the number of BusLogic Host Adapters successfully initialized and | |
2347 | registered. | |
2348 | */ | |
2349 | ||
839cb99e | 2350 | static int __init blogic_init(void) |
1da177e4 | 2351 | { |
839cb99e KA |
2352 | int adapter_count = 0, drvr_optindex = 0, probeindex; |
2353 | struct blogic_adapter *adapter; | |
d2afb3ae | 2354 | int ret = 0; |
1da177e4 LT |
2355 | |
2356 | #ifdef MODULE | |
2357 | if (BusLogic) | |
839cb99e | 2358 | blogic_setup(BusLogic); |
1da177e4 LT |
2359 | #endif |
2360 | ||
839cb99e | 2361 | if (blogic_probe_options.noprobe) |
1da177e4 | 2362 | return -ENODEV; |
839cb99e | 2363 | blogic_probeinfo_list = |
6396bb22 | 2364 | kcalloc(BLOGIC_MAX_ADAPTERS, sizeof(struct blogic_probeinfo), |
839cb99e KA |
2365 | GFP_KERNEL); |
2366 | if (blogic_probeinfo_list == NULL) { | |
2367 | blogic_err("BusLogic: Unable to allocate Probe Info List\n", | |
2368 | NULL); | |
1da177e4 LT |
2369 | return -ENOMEM; |
2370 | } | |
db3a8815 | 2371 | |
391e2f25 | 2372 | adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL); |
839cb99e KA |
2373 | if (adapter == NULL) { |
2374 | kfree(blogic_probeinfo_list); | |
2375 | blogic_err("BusLogic: Unable to allocate Prototype Host Adapter\n", NULL); | |
1da177e4 LT |
2376 | return -ENOMEM; |
2377 | } | |
db3a8815 | 2378 | |
1da177e4 LT |
2379 | #ifdef MODULE |
2380 | if (BusLogic != NULL) | |
839cb99e | 2381 | blogic_setup(BusLogic); |
1da177e4 | 2382 | #endif |
839cb99e KA |
2383 | blogic_init_probeinfo_list(adapter); |
2384 | for (probeindex = 0; probeindex < blogic_probeinfo_count; probeindex++) { | |
2385 | struct blogic_probeinfo *probeinfo = | |
2386 | &blogic_probeinfo_list[probeindex]; | |
2387 | struct blogic_adapter *myadapter = adapter; | |
2388 | struct Scsi_Host *host; | |
2389 | ||
2390 | if (probeinfo->io_addr == 0) | |
1da177e4 | 2391 | continue; |
839cb99e KA |
2392 | memset(myadapter, 0, sizeof(struct blogic_adapter)); |
2393 | myadapter->adapter_type = probeinfo->adapter_type; | |
2394 | myadapter->adapter_bus_type = probeinfo->adapter_bus_type; | |
2395 | myadapter->io_addr = probeinfo->io_addr; | |
2396 | myadapter->pci_addr = probeinfo->pci_addr; | |
2397 | myadapter->bus = probeinfo->bus; | |
2398 | myadapter->dev = probeinfo->dev; | |
2399 | myadapter->pci_device = probeinfo->pci_device; | |
2400 | myadapter->irq_ch = probeinfo->irq_ch; | |
2401 | myadapter->addr_count = | |
2402 | blogic_adapter_addr_count[myadapter->adapter_type]; | |
1079a2d2 ZA |
2403 | |
2404 | /* | |
2405 | Make sure region is free prior to probing. | |
2406 | */ | |
839cb99e | 2407 | if (!request_region(myadapter->io_addr, myadapter->addr_count, |
1079a2d2 ZA |
2408 | "BusLogic")) |
2409 | continue; | |
1da177e4 | 2410 | /* |
839cb99e KA |
2411 | Probe the Host Adapter. If unsuccessful, abort further |
2412 | initialization. | |
1da177e4 | 2413 | */ |
839cb99e KA |
2414 | if (!blogic_probe(myadapter)) { |
2415 | release_region(myadapter->io_addr, | |
2416 | myadapter->addr_count); | |
1da177e4 | 2417 | continue; |
1079a2d2 | 2418 | } |
1da177e4 LT |
2419 | /* |
2420 | Hard Reset the Host Adapter. If unsuccessful, abort further | |
2421 | initialization. | |
2422 | */ | |
839cb99e KA |
2423 | if (!blogic_hwreset(myadapter, true)) { |
2424 | release_region(myadapter->io_addr, | |
2425 | myadapter->addr_count); | |
1da177e4 | 2426 | continue; |
1079a2d2 | 2427 | } |
1da177e4 | 2428 | /* |
839cb99e KA |
2429 | Check the Host Adapter. If unsuccessful, abort further |
2430 | initialization. | |
1da177e4 | 2431 | */ |
839cb99e KA |
2432 | if (!blogic_checkadapter(myadapter)) { |
2433 | release_region(myadapter->io_addr, | |
2434 | myadapter->addr_count); | |
1da177e4 | 2435 | continue; |
1079a2d2 | 2436 | } |
1da177e4 LT |
2437 | /* |
2438 | Initialize the Driver Options field if provided. | |
2439 | */ | |
839cb99e KA |
2440 | if (drvr_optindex < blogic_drvr_options_count) |
2441 | myadapter->drvr_opts = | |
2442 | &blogic_drvr_options[drvr_optindex++]; | |
1da177e4 | 2443 | /* |
839cb99e KA |
2444 | Announce the Driver Version and Date, Author's Name, |
2445 | Copyright Notice, and Electronic Mail Address. | |
1da177e4 | 2446 | */ |
839cb99e | 2447 | blogic_announce_drvr(myadapter); |
1da177e4 LT |
2448 | /* |
2449 | Register the SCSI Host structure. | |
2450 | */ | |
2451 | ||
839cb99e KA |
2452 | host = scsi_host_alloc(&blogic_template, |
2453 | sizeof(struct blogic_adapter)); | |
2454 | if (host == NULL) { | |
2455 | release_region(myadapter->io_addr, | |
2456 | myadapter->addr_count); | |
1da177e4 LT |
2457 | continue; |
2458 | } | |
839cb99e KA |
2459 | myadapter = (struct blogic_adapter *) host->hostdata; |
2460 | memcpy(myadapter, adapter, sizeof(struct blogic_adapter)); | |
2461 | myadapter->scsi_host = host; | |
2462 | myadapter->host_no = host->host_no; | |
1da177e4 | 2463 | /* |
839cb99e KA |
2464 | Add Host Adapter to the end of the list of registered |
2465 | BusLogic Host Adapters. | |
1da177e4 | 2466 | */ |
839cb99e | 2467 | list_add_tail(&myadapter->host_list, &blogic_host_list); |
1da177e4 LT |
2468 | |
2469 | /* | |
839cb99e KA |
2470 | Read the Host Adapter Configuration, Configure the Host |
2471 | Adapter, Acquire the System Resources necessary to use | |
2472 | the Host Adapter, then Create the Initial CCBs, Initialize | |
2473 | the Host Adapter, and finally perform Target Device | |
2474 | Inquiry. From this point onward, any failure will be | |
2475 | assumed to be due to a problem with the Host Adapter, | |
2476 | rather than due to having mistakenly identified this port | |
2477 | as belonging to a BusLogic Host Adapter. The I/O Address | |
2478 | range will not be released, thereby preventing it from | |
2479 | being incorrectly identified as any other type of Host | |
2480 | Adapter. | |
1da177e4 | 2481 | */ |
839cb99e KA |
2482 | if (blogic_rdconfig(myadapter) && |
2483 | blogic_reportconfig(myadapter) && | |
2484 | blogic_getres(myadapter) && | |
2485 | blogic_create_initccbs(myadapter) && | |
2486 | blogic_initadapter(myadapter) && | |
2487 | blogic_inquiry(myadapter)) { | |
1da177e4 | 2488 | /* |
839cb99e KA |
2489 | Initialization has been completed successfully. |
2490 | Release and re-register usage of the I/O Address | |
2491 | range so that the Model Name of the Host Adapter | |
2492 | will appear, and initialize the SCSI Host structure. | |
1da177e4 | 2493 | */ |
839cb99e KA |
2494 | release_region(myadapter->io_addr, |
2495 | myadapter->addr_count); | |
2496 | if (!request_region(myadapter->io_addr, | |
2497 | myadapter->addr_count, | |
2498 | myadapter->full_model)) { | |
d2afb3ae DW |
2499 | printk(KERN_WARNING |
2500 | "BusLogic: Release and re-register of " | |
2501 | "port 0x%04lx failed \n", | |
839cb99e KA |
2502 | (unsigned long)myadapter->io_addr); |
2503 | blogic_destroy_ccbs(myadapter); | |
2504 | blogic_relres(myadapter); | |
2505 | list_del(&myadapter->host_list); | |
2506 | scsi_host_put(host); | |
d2afb3ae | 2507 | ret = -ENOMEM; |
1da177e4 | 2508 | } else { |
839cb99e KA |
2509 | blogic_inithoststruct(myadapter, |
2510 | host); | |
2511 | if (scsi_add_host(host, myadapter->pci_device | |
2512 | ? &myadapter->pci_device->dev | |
d2afb3ae DW |
2513 | : NULL)) { |
2514 | printk(KERN_WARNING | |
2515 | "BusLogic: scsi_add_host()" | |
2516 | "failed!\n"); | |
839cb99e KA |
2517 | blogic_destroy_ccbs(myadapter); |
2518 | blogic_relres(myadapter); | |
2519 | list_del(&myadapter->host_list); | |
2520 | scsi_host_put(host); | |
d2afb3ae DW |
2521 | ret = -ENODEV; |
2522 | } else { | |
839cb99e KA |
2523 | scsi_scan_host(host); |
2524 | adapter_count++; | |
d2afb3ae | 2525 | } |
1da177e4 LT |
2526 | } |
2527 | } else { | |
2528 | /* | |
839cb99e KA |
2529 | An error occurred during Host Adapter Configuration |
2530 | Querying, Host Adapter Configuration, Resource | |
2531 | Acquisition, CCB Creation, Host Adapter | |
2532 | Initialization, or Target Device Inquiry, so | |
2533 | remove Host Adapter from the list of registered | |
2534 | BusLogic Host Adapters, destroy the CCBs, Release | |
2535 | the System Resources, and Unregister the SCSI | |
1da177e4 LT |
2536 | Host. |
2537 | */ | |
839cb99e KA |
2538 | blogic_destroy_ccbs(myadapter); |
2539 | blogic_relres(myadapter); | |
2540 | list_del(&myadapter->host_list); | |
2541 | scsi_host_put(host); | |
d2afb3ae | 2542 | ret = -ENODEV; |
1da177e4 LT |
2543 | } |
2544 | } | |
839cb99e KA |
2545 | kfree(adapter); |
2546 | kfree(blogic_probeinfo_list); | |
2547 | blogic_probeinfo_list = NULL; | |
d2afb3ae | 2548 | return ret; |
1da177e4 LT |
2549 | } |
2550 | ||
2551 | ||
2552 | /* | |
839cb99e | 2553 | blogic_deladapter releases all resources previously acquired to |
1da177e4 LT |
2554 | support a specific Host Adapter, including the I/O Address range, and |
2555 | unregisters the BusLogic Host Adapter. | |
2556 | */ | |
2557 | ||
839cb99e | 2558 | static int __exit blogic_deladapter(struct blogic_adapter *adapter) |
1da177e4 | 2559 | { |
839cb99e | 2560 | struct Scsi_Host *host = adapter->scsi_host; |
1da177e4 | 2561 | |
839cb99e | 2562 | scsi_remove_host(host); |
1da177e4 LT |
2563 | |
2564 | /* | |
2565 | FlashPoint Host Adapters must first be released by the FlashPoint | |
2566 | SCCB Manager. | |
2567 | */ | |
839cb99e KA |
2568 | if (blogic_flashpoint_type(adapter)) |
2569 | FlashPoint_ReleaseHostAdapter(adapter->cardhandle); | |
1da177e4 LT |
2570 | /* |
2571 | Destroy the CCBs and release any system resources acquired to | |
2572 | support Host Adapter. | |
2573 | */ | |
839cb99e KA |
2574 | blogic_destroy_ccbs(adapter); |
2575 | blogic_relres(adapter); | |
1da177e4 LT |
2576 | /* |
2577 | Release usage of the I/O Address range. | |
2578 | */ | |
839cb99e | 2579 | release_region(adapter->io_addr, adapter->addr_count); |
1da177e4 | 2580 | /* |
839cb99e KA |
2581 | Remove Host Adapter from the list of registered BusLogic |
2582 | Host Adapters. | |
1da177e4 | 2583 | */ |
839cb99e | 2584 | list_del(&adapter->host_list); |
1da177e4 | 2585 | |
839cb99e | 2586 | scsi_host_put(host); |
1da177e4 LT |
2587 | return 0; |
2588 | } | |
2589 | ||
2590 | ||
2591 | /* | |
839cb99e | 2592 | blogic_qcompleted_ccb queues CCB for completion processing. |
1da177e4 LT |
2593 | */ |
2594 | ||
839cb99e | 2595 | static void blogic_qcompleted_ccb(struct blogic_ccb *ccb) |
1da177e4 | 2596 | { |
839cb99e KA |
2597 | struct blogic_adapter *adapter = ccb->adapter; |
2598 | ||
2599 | ccb->status = BLOGIC_CCB_COMPLETE; | |
2600 | ccb->next = NULL; | |
2601 | if (adapter->firstccb == NULL) { | |
2602 | adapter->firstccb = ccb; | |
2603 | adapter->lastccb = ccb; | |
1da177e4 | 2604 | } else { |
839cb99e KA |
2605 | adapter->lastccb->next = ccb; |
2606 | adapter->lastccb = ccb; | |
1da177e4 | 2607 | } |
839cb99e | 2608 | adapter->active_cmds[ccb->tgt_id]--; |
1da177e4 LT |
2609 | } |
2610 | ||
2611 | ||
2612 | /* | |
839cb99e | 2613 | blogic_resultcode computes a SCSI Subsystem Result Code from |
1da177e4 LT |
2614 | the Host Adapter Status and Target Device Status. |
2615 | */ | |
2616 | ||
839cb99e KA |
2617 | static int blogic_resultcode(struct blogic_adapter *adapter, |
2618 | enum blogic_adapter_status adapter_status, | |
2619 | enum blogic_tgt_status tgt_status) | |
1da177e4 | 2620 | { |
839cb99e KA |
2621 | int hoststatus; |
2622 | ||
2623 | switch (adapter_status) { | |
2624 | case BLOGIC_CMD_CMPLT_NORMAL: | |
2625 | case BLOGIC_LINK_CMD_CMPLT: | |
2626 | case BLOGIC_LINK_CMD_CMPLT_FLAG: | |
2627 | hoststatus = DID_OK; | |
1da177e4 | 2628 | break; |
839cb99e KA |
2629 | case BLOGIC_SELECT_TIMEOUT: |
2630 | hoststatus = DID_TIME_OUT; | |
1da177e4 | 2631 | break; |
839cb99e KA |
2632 | case BLOGIC_INVALID_OUTBOX_CODE: |
2633 | case BLOGIC_INVALID_CMD_CODE: | |
2634 | case BLOGIC_BAD_CMD_PARAM: | |
2635 | blogic_warn("BusLogic Driver Protocol Error 0x%02X\n", | |
2636 | adapter, adapter_status); | |
1ff2d8c4 | 2637 | /* fall through */ |
839cb99e KA |
2638 | case BLOGIC_DATA_UNDERRUN: |
2639 | case BLOGIC_DATA_OVERRUN: | |
2640 | case BLOGIC_NOEXPECT_BUSFREE: | |
2641 | case BLOGIC_LINKCCB_BADLUN: | |
2642 | case BLOGIC_AUTOREQSENSE_FAIL: | |
2643 | case BLOGIC_TAGQUEUE_REJECT: | |
2644 | case BLOGIC_BAD_MSG_RCVD: | |
2645 | case BLOGIC_HW_FAIL: | |
2646 | case BLOGIC_BAD_RECONNECT: | |
2647 | case BLOGIC_ABRT_QUEUE: | |
2648 | case BLOGIC_ADAPTER_SW_ERROR: | |
2649 | case BLOGIC_HW_TIMEOUT: | |
2650 | case BLOGIC_PARITY_ERR: | |
2651 | hoststatus = DID_ERROR; | |
1da177e4 | 2652 | break; |
839cb99e KA |
2653 | case BLOGIC_INVALID_BUSPHASE: |
2654 | case BLOGIC_NORESPONSE_TO_ATN: | |
2655 | case BLOGIC_HW_RESET: | |
2656 | case BLOGIC_RST_FROM_OTHERDEV: | |
2657 | case BLOGIC_HW_BDR: | |
2658 | hoststatus = DID_RESET; | |
1da177e4 LT |
2659 | break; |
2660 | default: | |
839cb99e KA |
2661 | blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter, |
2662 | adapter_status); | |
2663 | hoststatus = DID_ERROR; | |
1da177e4 LT |
2664 | break; |
2665 | } | |
839cb99e | 2666 | return (hoststatus << 16) | tgt_status; |
1da177e4 LT |
2667 | } |
2668 | ||
2669 | ||
2670 | /* | |
839cb99e | 2671 | blogic_scan_inbox scans the Incoming Mailboxes saving any |
1da177e4 LT |
2672 | Incoming Mailbox entries for completion processing. |
2673 | */ | |
2674 | ||
839cb99e | 2675 | static void blogic_scan_inbox(struct blogic_adapter *adapter) |
1da177e4 LT |
2676 | { |
2677 | /* | |
839cb99e KA |
2678 | Scan through the Incoming Mailboxes in Strict Round Robin |
2679 | fashion, saving any completed CCBs for further processing. It | |
2680 | is essential that for each CCB and SCSI Command issued, command | |
2681 | completion processing is performed exactly once. Therefore, | |
2682 | only Incoming Mailboxes with completion code Command Completed | |
2683 | Without Error, Command Completed With Error, or Command Aborted | |
2684 | At Host Request are saved for completion processing. When an | |
2685 | Incoming Mailbox has a completion code of Aborted Command Not | |
2686 | Found, the CCB had already completed or been aborted before the | |
2687 | current Abort request was processed, and so completion processing | |
2688 | has already occurred and no further action should be taken. | |
2689 | */ | |
2690 | struct blogic_inbox *next_inbox = adapter->next_inbox; | |
2691 | enum blogic_cmplt_code comp_code; | |
2692 | ||
2693 | while ((comp_code = next_inbox->comp_code) != BLOGIC_INBOX_FREE) { | |
1da177e4 | 2694 | /* |
839cb99e KA |
2695 | We are only allowed to do this because we limit our |
2696 | architectures we run on to machines where bus_to_virt( | |
2697 | actually works. There *needs* to be a dma_addr_to_virt() | |
2698 | in the new PCI DMA mapping interface to replace | |
2699 | bus_to_virt() or else this code is going to become very | |
1da177e4 LT |
2700 | innefficient. |
2701 | */ | |
839cb99e KA |
2702 | struct blogic_ccb *ccb = |
2703 | (struct blogic_ccb *) bus_to_virt(next_inbox->ccb); | |
2704 | if (comp_code != BLOGIC_CMD_NOTFOUND) { | |
2705 | if (ccb->status == BLOGIC_CCB_ACTIVE || | |
2706 | ccb->status == BLOGIC_CCB_RESET) { | |
1da177e4 | 2707 | /* |
839cb99e KA |
2708 | Save the Completion Code for this CCB and |
2709 | queue the CCB for completion processing. | |
1da177e4 | 2710 | */ |
839cb99e KA |
2711 | ccb->comp_code = comp_code; |
2712 | blogic_qcompleted_ccb(ccb); | |
1da177e4 LT |
2713 | } else { |
2714 | /* | |
839cb99e KA |
2715 | If a CCB ever appears in an Incoming Mailbox |
2716 | and is not marked as status Active or Reset, | |
2717 | then there is most likely a bug in | |
1da177e4 LT |
2718 | the Host Adapter firmware. |
2719 | */ | |
839cb99e | 2720 | blogic_warn("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", adapter, ccb->serial, ccb->status); |
1da177e4 LT |
2721 | } |
2722 | } | |
839cb99e KA |
2723 | next_inbox->comp_code = BLOGIC_INBOX_FREE; |
2724 | if (++next_inbox > adapter->last_inbox) | |
2725 | next_inbox = adapter->first_inbox; | |
1da177e4 | 2726 | } |
839cb99e | 2727 | adapter->next_inbox = next_inbox; |
1da177e4 LT |
2728 | } |
2729 | ||
2730 | ||
2731 | /* | |
839cb99e | 2732 | blogic_process_ccbs iterates over the completed CCBs for Host |
1da177e4 LT |
2733 | Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and |
2734 | calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock | |
2735 | should already have been acquired by the caller. | |
2736 | */ | |
2737 | ||
839cb99e | 2738 | static void blogic_process_ccbs(struct blogic_adapter *adapter) |
1da177e4 | 2739 | { |
839cb99e | 2740 | if (adapter->processing_ccbs) |
1da177e4 | 2741 | return; |
839cb99e KA |
2742 | adapter->processing_ccbs = true; |
2743 | while (adapter->firstccb != NULL) { | |
2744 | struct blogic_ccb *ccb = adapter->firstccb; | |
2745 | struct scsi_cmnd *command = ccb->command; | |
2746 | adapter->firstccb = ccb->next; | |
2747 | if (adapter->firstccb == NULL) | |
2748 | adapter->lastccb = NULL; | |
1da177e4 LT |
2749 | /* |
2750 | Process the Completed CCB. | |
2751 | */ | |
839cb99e KA |
2752 | if (ccb->opcode == BLOGIC_BDR) { |
2753 | int tgt_id = ccb->tgt_id; | |
2754 | ||
2755 | blogic_warn("Bus Device Reset CCB #%ld to Target " "%d Completed\n", adapter, ccb->serial, tgt_id); | |
2756 | blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done); | |
2757 | adapter->tgt_flags[tgt_id].tagq_active = false; | |
2758 | adapter->cmds_since_rst[tgt_id] = 0; | |
2759 | adapter->last_resetdone[tgt_id] = jiffies; | |
1da177e4 LT |
2760 | /* |
2761 | Place CCB back on the Host Adapter's free list. | |
2762 | */ | |
eeceec90 KA |
2763 | blogic_dealloc_ccb(ccb, 1); |
2764 | #if 0 /* this needs to be redone different for new EH */ | |
1da177e4 | 2765 | /* |
839cb99e KA |
2766 | Bus Device Reset CCBs have the command field |
2767 | non-NULL only when a Bus Device Reset was requested | |
2768 | for a command that did not have a currently active | |
2769 | CCB in the Host Adapter (i.e., a Synchronous Bus | |
2770 | Device Reset), and hence would not have its | |
2771 | Completion Routine called otherwise. | |
1da177e4 | 2772 | */ |
839cb99e KA |
2773 | while (command != NULL) { |
2774 | struct scsi_cmnd *nxt_cmd = | |
2775 | command->reset_chain; | |
2776 | command->reset_chain = NULL; | |
2777 | command->result = DID_RESET << 16; | |
2778 | command->scsi_done(command); | |
2779 | command = nxt_cmd; | |
1da177e4 LT |
2780 | } |
2781 | #endif | |
2782 | /* | |
839cb99e KA |
2783 | Iterate over the CCBs for this Host Adapter |
2784 | performing completion processing for any CCBs | |
2785 | marked as Reset for this Target. | |
1da177e4 | 2786 | */ |
839cb99e KA |
2787 | for (ccb = adapter->all_ccbs; ccb != NULL; |
2788 | ccb = ccb->next_all) | |
2789 | if (ccb->status == BLOGIC_CCB_RESET && | |
2790 | ccb->tgt_id == tgt_id) { | |
2791 | command = ccb->command; | |
eeceec90 | 2792 | blogic_dealloc_ccb(ccb, 1); |
839cb99e KA |
2793 | adapter->active_cmds[tgt_id]--; |
2794 | command->result = DID_RESET << 16; | |
2795 | command->scsi_done(command); | |
1da177e4 | 2796 | } |
839cb99e | 2797 | adapter->bdr_pend[tgt_id] = NULL; |
1da177e4 LT |
2798 | } else { |
2799 | /* | |
839cb99e KA |
2800 | Translate the Completion Code, Host Adapter Status, |
2801 | and Target Device Status into a SCSI Subsystem | |
2802 | Result Code. | |
1da177e4 | 2803 | */ |
839cb99e KA |
2804 | switch (ccb->comp_code) { |
2805 | case BLOGIC_INBOX_FREE: | |
2806 | case BLOGIC_CMD_NOTFOUND: | |
2807 | case BLOGIC_INVALID_CCB: | |
2808 | blogic_warn("CCB #%ld to Target %d Impossible State\n", adapter, ccb->serial, ccb->tgt_id); | |
1da177e4 | 2809 | break; |
839cb99e KA |
2810 | case BLOGIC_CMD_COMPLETE_GOOD: |
2811 | adapter->tgt_stats[ccb->tgt_id] | |
2812 | .cmds_complete++; | |
2813 | adapter->tgt_flags[ccb->tgt_id] | |
2814 | .cmd_good = true; | |
2815 | command->result = DID_OK << 16; | |
1da177e4 | 2816 | break; |
839cb99e KA |
2817 | case BLOGIC_CMD_ABORT_BY_HOST: |
2818 | blogic_warn("CCB #%ld to Target %d Aborted\n", | |
2819 | adapter, ccb->serial, ccb->tgt_id); | |
2820 | blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done); | |
2821 | command->result = DID_ABORT << 16; | |
1da177e4 | 2822 | break; |
839cb99e KA |
2823 | case BLOGIC_CMD_COMPLETE_ERROR: |
2824 | command->result = blogic_resultcode(adapter, | |
2825 | ccb->adapter_status, ccb->tgt_status); | |
2826 | if (ccb->adapter_status != BLOGIC_SELECT_TIMEOUT) { | |
2827 | adapter->tgt_stats[ccb->tgt_id] | |
2828 | .cmds_complete++; | |
2829 | if (blogic_global_options.trace_err) { | |
1da177e4 | 2830 | int i; |
839cb99e KA |
2831 | blogic_notice("CCB #%ld Target %d: Result %X Host " |
2832 | "Adapter Status %02X " "Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result, ccb->adapter_status, ccb->tgt_status); | |
2833 | blogic_notice("CDB ", adapter); | |
2834 | for (i = 0; i < ccb->cdblen; i++) | |
2835 | blogic_notice(" %02X", adapter, ccb->cdb[i]); | |
2836 | blogic_notice("\n", adapter); | |
2837 | blogic_notice("Sense ", adapter); | |
2838 | for (i = 0; i < ccb->sense_datalen; i++) | |
2839 | blogic_notice(" %02X", adapter, command->sense_buffer[i]); | |
2840 | blogic_notice("\n", adapter); | |
1da177e4 LT |
2841 | } |
2842 | } | |
2843 | break; | |
2844 | } | |
2845 | /* | |
2846 | When an INQUIRY command completes normally, save the | |
2847 | CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit | |
2848 | Wide Data Transfers Supported) bits. | |
2849 | */ | |
839cb99e KA |
2850 | if (ccb->cdb[0] == INQUIRY && ccb->cdb[1] == 0 && |
2851 | ccb->adapter_status == BLOGIC_CMD_CMPLT_NORMAL) { | |
2852 | struct blogic_tgt_flags *tgt_flags = | |
2853 | &adapter->tgt_flags[ccb->tgt_id]; | |
2854 | struct scsi_inquiry *inquiry = | |
2855 | (struct scsi_inquiry *) scsi_sglist(command); | |
2856 | tgt_flags->tgt_exists = true; | |
2857 | tgt_flags->tagq_ok = inquiry->CmdQue; | |
2858 | tgt_flags->wide_ok = inquiry->WBus16; | |
1da177e4 LT |
2859 | } |
2860 | /* | |
2861 | Place CCB back on the Host Adapter's free list. | |
2862 | */ | |
eeceec90 | 2863 | blogic_dealloc_ccb(ccb, 1); |
1da177e4 LT |
2864 | /* |
2865 | Call the SCSI Command Completion Routine. | |
2866 | */ | |
839cb99e | 2867 | command->scsi_done(command); |
1da177e4 LT |
2868 | } |
2869 | } | |
839cb99e | 2870 | adapter->processing_ccbs = false; |
1da177e4 LT |
2871 | } |
2872 | ||
2873 | ||
2874 | /* | |
839cb99e | 2875 | blogic_inthandler handles hardware interrupts from BusLogic Host |
1da177e4 LT |
2876 | Adapters. |
2877 | */ | |
2878 | ||
839cb99e | 2879 | static irqreturn_t blogic_inthandler(int irq_ch, void *devid) |
1da177e4 | 2880 | { |
839cb99e KA |
2881 | struct blogic_adapter *adapter = (struct blogic_adapter *) devid; |
2882 | unsigned long processor_flag; | |
1da177e4 LT |
2883 | /* |
2884 | Acquire exclusive access to Host Adapter. | |
2885 | */ | |
839cb99e | 2886 | spin_lock_irqsave(adapter->scsi_host->host_lock, processor_flag); |
1da177e4 LT |
2887 | /* |
2888 | Handle Interrupts appropriately for each Host Adapter type. | |
2889 | */ | |
839cb99e KA |
2890 | if (blogic_multimaster_type(adapter)) { |
2891 | union blogic_int_reg intreg; | |
1da177e4 LT |
2892 | /* |
2893 | Read the Host Adapter Interrupt Register. | |
2894 | */ | |
839cb99e KA |
2895 | intreg.all = blogic_rdint(adapter); |
2896 | if (intreg.ir.int_valid) { | |
1da177e4 LT |
2897 | /* |
2898 | Acknowledge the interrupt and reset the Host Adapter | |
2899 | Interrupt Register. | |
2900 | */ | |
839cb99e | 2901 | blogic_intreset(adapter); |
1da177e4 | 2902 | /* |
839cb99e KA |
2903 | Process valid External SCSI Bus Reset and Incoming |
2904 | Mailbox Loaded Interrupts. Command Complete | |
2905 | Interrupts are noted, and Outgoing Mailbox Available | |
2906 | Interrupts are ignored, as they are never enabled. | |
1da177e4 | 2907 | */ |
839cb99e KA |
2908 | if (intreg.ir.ext_busreset) |
2909 | adapter->adapter_extreset = true; | |
2910 | else if (intreg.ir.mailin_loaded) | |
2911 | blogic_scan_inbox(adapter); | |
2912 | else if (intreg.ir.cmd_complete) | |
2913 | adapter->adapter_cmd_complete = true; | |
1da177e4 LT |
2914 | } |
2915 | } else { | |
2916 | /* | |
2917 | Check if there is a pending interrupt for this Host Adapter. | |
2918 | */ | |
839cb99e KA |
2919 | if (FlashPoint_InterruptPending(adapter->cardhandle)) |
2920 | switch (FlashPoint_HandleInterrupt(adapter->cardhandle)) { | |
2921 | case FPOINT_NORMAL_INT: | |
1da177e4 | 2922 | break; |
839cb99e KA |
2923 | case FPOINT_EXT_RESET: |
2924 | adapter->adapter_extreset = true; | |
1da177e4 | 2925 | break; |
839cb99e KA |
2926 | case FPOINT_INTERN_ERR: |
2927 | blogic_warn("Internal FlashPoint Error detected - Resetting Host Adapter\n", adapter); | |
2928 | adapter->adapter_intern_err = true; | |
1da177e4 LT |
2929 | break; |
2930 | } | |
2931 | } | |
2932 | /* | |
2933 | Process any completed CCBs. | |
2934 | */ | |
839cb99e KA |
2935 | if (adapter->firstccb != NULL) |
2936 | blogic_process_ccbs(adapter); | |
1da177e4 LT |
2937 | /* |
2938 | Reset the Host Adapter if requested. | |
2939 | */ | |
839cb99e KA |
2940 | if (adapter->adapter_extreset) { |
2941 | blogic_warn("Resetting %s due to External SCSI Bus Reset\n", adapter, adapter->full_model); | |
2942 | blogic_inc_count(&adapter->ext_resets); | |
2943 | blogic_resetadapter(adapter, false); | |
2944 | adapter->adapter_extreset = false; | |
2945 | } else if (adapter->adapter_intern_err) { | |
2946 | blogic_warn("Resetting %s due to Host Adapter Internal Error\n", adapter, adapter->full_model); | |
2947 | blogic_inc_count(&adapter->adapter_intern_errors); | |
2948 | blogic_resetadapter(adapter, true); | |
2949 | adapter->adapter_intern_err = false; | |
1da177e4 LT |
2950 | } |
2951 | /* | |
2952 | Release exclusive access to Host Adapter. | |
2953 | */ | |
839cb99e | 2954 | spin_unlock_irqrestore(adapter->scsi_host->host_lock, processor_flag); |
1da177e4 LT |
2955 | return IRQ_HANDLED; |
2956 | } | |
2957 | ||
2958 | ||
2959 | /* | |
839cb99e | 2960 | blogic_write_outbox places CCB and Action Code into an Outgoing |
1da177e4 LT |
2961 | Mailbox for execution by Host Adapter. The Host Adapter's Lock should |
2962 | already have been acquired by the caller. | |
2963 | */ | |
2964 | ||
839cb99e KA |
2965 | static bool blogic_write_outbox(struct blogic_adapter *adapter, |
2966 | enum blogic_action action, struct blogic_ccb *ccb) | |
1da177e4 | 2967 | { |
839cb99e KA |
2968 | struct blogic_outbox *next_outbox; |
2969 | ||
2970 | next_outbox = adapter->next_outbox; | |
2971 | if (next_outbox->action == BLOGIC_OUTBOX_FREE) { | |
2972 | ccb->status = BLOGIC_CCB_ACTIVE; | |
1da177e4 | 2973 | /* |
839cb99e KA |
2974 | The CCB field must be written before the Action Code field |
2975 | since the Host Adapter is operating asynchronously and the | |
2976 | locking code does not protect against simultaneous access | |
2977 | by the Host Adapter. | |
1da177e4 | 2978 | */ |
839cb99e KA |
2979 | next_outbox->ccb = ccb->dma_handle; |
2980 | next_outbox->action = action; | |
2981 | blogic_execmbox(adapter); | |
2982 | if (++next_outbox > adapter->last_outbox) | |
2983 | next_outbox = adapter->first_outbox; | |
2984 | adapter->next_outbox = next_outbox; | |
2985 | if (action == BLOGIC_MBOX_START) { | |
2986 | adapter->active_cmds[ccb->tgt_id]++; | |
2987 | if (ccb->opcode != BLOGIC_BDR) | |
2988 | adapter->tgt_stats[ccb->tgt_id].cmds_tried++; | |
1da177e4 LT |
2989 | } |
2990 | return true; | |
2991 | } | |
2992 | return false; | |
2993 | } | |
2994 | ||
2995 | /* Error Handling (EH) support */ | |
2996 | ||
839cb99e | 2997 | static int blogic_hostreset(struct scsi_cmnd *SCpnt) |
1da177e4 | 2998 | { |
839cb99e KA |
2999 | struct blogic_adapter *adapter = |
3000 | (struct blogic_adapter *) SCpnt->device->host->hostdata; | |
1da177e4 LT |
3001 | |
3002 | unsigned int id = SCpnt->device->id; | |
839cb99e | 3003 | struct blogic_tgt_stats *stats = &adapter->tgt_stats[id]; |
df0ae249 JG |
3004 | int rc; |
3005 | ||
3006 | spin_lock_irq(SCpnt->device->host->host_lock); | |
3007 | ||
20961065 | 3008 | blogic_inc_count(&stats->adapter_reset_req); |
1da177e4 | 3009 | |
839cb99e | 3010 | rc = blogic_resetadapter(adapter, false); |
df0ae249 JG |
3011 | spin_unlock_irq(SCpnt->device->host->host_lock); |
3012 | return rc; | |
1da177e4 LT |
3013 | } |
3014 | ||
3015 | /* | |
839cb99e | 3016 | blogic_qcmd creates a CCB for Command and places it into an |
1da177e4 LT |
3017 | Outgoing Mailbox for execution by the associated Host Adapter. |
3018 | */ | |
3019 | ||
839cb99e KA |
3020 | static int blogic_qcmd_lck(struct scsi_cmnd *command, |
3021 | void (*comp_cb) (struct scsi_cmnd *)) | |
1da177e4 | 3022 | { |
839cb99e KA |
3023 | struct blogic_adapter *adapter = |
3024 | (struct blogic_adapter *) command->device->host->hostdata; | |
3025 | struct blogic_tgt_flags *tgt_flags = | |
3026 | &adapter->tgt_flags[command->device->id]; | |
3027 | struct blogic_tgt_stats *tgt_stats = adapter->tgt_stats; | |
3028 | unsigned char *cdb = command->cmnd; | |
3029 | int cdblen = command->cmd_len; | |
3030 | int tgt_id = command->device->id; | |
3031 | int lun = command->device->lun; | |
3032 | int buflen = scsi_bufflen(command); | |
3033 | int count; | |
3034 | struct blogic_ccb *ccb; | |
eeceec90 | 3035 | dma_addr_t sense_buf; |
839cb99e KA |
3036 | |
3037 | /* | |
3038 | SCSI REQUEST_SENSE commands will be executed automatically by the | |
3039 | Host Adapter for any errors, so they should not be executed | |
3040 | explicitly unless the Sense Data is zero indicating that no error | |
3041 | occurred. | |
3042 | */ | |
3043 | if (cdb[0] == REQUEST_SENSE && command->sense_buffer[0] != 0) { | |
3044 | command->result = DID_OK << 16; | |
3045 | comp_cb(command); | |
1da177e4 LT |
3046 | return 0; |
3047 | } | |
3048 | /* | |
839cb99e KA |
3049 | Allocate a CCB from the Host Adapter's free list. In the unlikely |
3050 | event that there are none available and memory allocation fails, | |
3051 | wait 1 second and try again. If that fails, the Host Adapter is | |
3052 | probably hung so signal an error as a Host Adapter Hard Reset | |
3053 | should be initiated soon. | |
3054 | */ | |
3055 | ccb = blogic_alloc_ccb(adapter); | |
3056 | if (ccb == NULL) { | |
3057 | spin_unlock_irq(adapter->scsi_host->host_lock); | |
3058 | blogic_delay(1); | |
3059 | spin_lock_irq(adapter->scsi_host->host_lock); | |
3060 | ccb = blogic_alloc_ccb(adapter); | |
3061 | if (ccb == NULL) { | |
3062 | command->result = DID_ERROR << 16; | |
3063 | comp_cb(command); | |
1da177e4 LT |
3064 | return 0; |
3065 | } | |
3066 | } | |
ddc914c7 | 3067 | |
1da177e4 LT |
3068 | /* |
3069 | Initialize the fields in the BusLogic Command Control Block (CCB). | |
3070 | */ | |
839cb99e KA |
3071 | count = scsi_dma_map(command); |
3072 | BUG_ON(count < 0); | |
3073 | if (count) { | |
ddc914c7 FT |
3074 | struct scatterlist *sg; |
3075 | int i; | |
3076 | ||
839cb99e KA |
3077 | ccb->opcode = BLOGIC_INITIATOR_CCB_SG; |
3078 | ccb->datalen = count * sizeof(struct blogic_sg_seg); | |
3079 | if (blogic_multimaster_type(adapter)) | |
391e2f25 | 3080 | ccb->data = (void *)((unsigned int) ccb->dma_handle + |
839cb99e | 3081 | ((unsigned long) &ccb->sglist - |
391e2f25 | 3082 | (unsigned long) ccb)); |
1da177e4 | 3083 | else |
391e2f25 | 3084 | ccb->data = ccb->sglist; |
ddc914c7 | 3085 | |
839cb99e KA |
3086 | scsi_for_each_sg(command, sg, count, i) { |
3087 | ccb->sglist[i].segbytes = sg_dma_len(sg); | |
3088 | ccb->sglist[i].segdata = sg_dma_address(sg); | |
1da177e4 | 3089 | } |
839cb99e KA |
3090 | } else if (!count) { |
3091 | ccb->opcode = BLOGIC_INITIATOR_CCB; | |
3092 | ccb->datalen = buflen; | |
3093 | ccb->data = 0; | |
1da177e4 | 3094 | } |
ddc914c7 | 3095 | |
839cb99e | 3096 | switch (cdb[0]) { |
1da177e4 LT |
3097 | case READ_6: |
3098 | case READ_10: | |
839cb99e KA |
3099 | ccb->datadir = BLOGIC_DATAIN_CHECKED; |
3100 | tgt_stats[tgt_id].read_cmds++; | |
3101 | blogic_addcount(&tgt_stats[tgt_id].bytesread, buflen); | |
3102 | blogic_incszbucket(tgt_stats[tgt_id].read_sz_buckets, buflen); | |
1da177e4 LT |
3103 | break; |
3104 | case WRITE_6: | |
3105 | case WRITE_10: | |
839cb99e KA |
3106 | ccb->datadir = BLOGIC_DATAOUT_CHECKED; |
3107 | tgt_stats[tgt_id].write_cmds++; | |
3108 | blogic_addcount(&tgt_stats[tgt_id].byteswritten, buflen); | |
3109 | blogic_incszbucket(tgt_stats[tgt_id].write_sz_buckets, buflen); | |
1da177e4 LT |
3110 | break; |
3111 | default: | |
839cb99e | 3112 | ccb->datadir = BLOGIC_UNCHECKED_TX; |
1da177e4 LT |
3113 | break; |
3114 | } | |
839cb99e KA |
3115 | ccb->cdblen = cdblen; |
3116 | ccb->adapter_status = 0; | |
3117 | ccb->tgt_status = 0; | |
3118 | ccb->tgt_id = tgt_id; | |
3119 | ccb->lun = lun; | |
3120 | ccb->tag_enable = false; | |
3121 | ccb->legacytag_enable = false; | |
3122 | /* | |
3123 | BusLogic recommends that after a Reset the first couple of | |
3124 | commands that are sent to a Target Device be sent in a non | |
3125 | Tagged Queue fashion so that the Host Adapter and Target Device | |
3126 | can establish Synchronous and Wide Transfer before Queue Tag | |
3127 | messages can interfere with the Synchronous and Wide Negotiation | |
3128 | messages. By waiting to enable Tagged Queuing until after the | |
3129 | first BLOGIC_MAX_TAG_DEPTH commands have been queued, it is | |
3130 | assured that after a Reset any pending commands are requeued | |
3131 | before Tagged Queuing is enabled and that the Tagged Queuing | |
3132 | message will not occur while the partition table is being printed. | |
3133 | In addition, some devices do not properly handle the transition | |
3134 | from non-tagged to tagged commands, so it is necessary to wait | |
3135 | until there are no pending commands for a target device | |
1da177e4 LT |
3136 | before queuing tagged commands. |
3137 | */ | |
839cb99e KA |
3138 | if (adapter->cmds_since_rst[tgt_id]++ >= BLOGIC_MAX_TAG_DEPTH && |
3139 | !tgt_flags->tagq_active && | |
3140 | adapter->active_cmds[tgt_id] == 0 | |
3141 | && tgt_flags->tagq_ok && | |
3142 | (adapter->tagq_ok & (1 << tgt_id))) { | |
3143 | tgt_flags->tagq_active = true; | |
3144 | blogic_notice("Tagged Queuing now active for Target %d\n", | |
3145 | adapter, tgt_id); | |
3146 | } | |
3147 | if (tgt_flags->tagq_active) { | |
3148 | enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG; | |
1da177e4 | 3149 | /* |
839cb99e KA |
3150 | When using Tagged Queuing with Simple Queue Tags, it |
3151 | appears that disk drive controllers do not guarantee that | |
3152 | a queued command will not remain in a disconnected state | |
3153 | indefinitely if commands that read or write nearer the | |
3154 | head position continue to arrive without interruption. | |
3155 | Therefore, for each Target Device this driver keeps track | |
3156 | of the last time either the queue was empty or an Ordered | |
3157 | Queue Tag was issued. If more than 4 seconds (one fifth | |
3158 | of the 20 second disk timeout) have elapsed since this | |
3159 | last sequence point, this command will be issued with an | |
3160 | Ordered Queue Tag rather than a Simple Queue Tag, which | |
3161 | forces the Target Device to complete all previously | |
3162 | queued commands before this command may be executed. | |
1da177e4 | 3163 | */ |
839cb99e KA |
3164 | if (adapter->active_cmds[tgt_id] == 0) |
3165 | adapter->last_seqpoint[tgt_id] = jiffies; | |
3166 | else if (time_after(jiffies, | |
3167 | adapter->last_seqpoint[tgt_id] + 4 * HZ)) { | |
3168 | adapter->last_seqpoint[tgt_id] = jiffies; | |
3169 | queuetag = BLOGIC_ORDEREDTAG; | |
1da177e4 | 3170 | } |
839cb99e KA |
3171 | if (adapter->ext_lun) { |
3172 | ccb->tag_enable = true; | |
3173 | ccb->queuetag = queuetag; | |
1da177e4 | 3174 | } else { |
839cb99e KA |
3175 | ccb->legacytag_enable = true; |
3176 | ccb->legacy_tag = queuetag; | |
1da177e4 LT |
3177 | } |
3178 | } | |
839cb99e KA |
3179 | memcpy(ccb->cdb, cdb, cdblen); |
3180 | ccb->sense_datalen = SCSI_SENSE_BUFFERSIZE; | |
eeceec90 | 3181 | ccb->command = command; |
17a361b2 | 3182 | sense_buf = dma_map_single(&adapter->pci_device->dev, |
839cb99e | 3183 | command->sense_buffer, ccb->sense_datalen, |
17a361b2 | 3184 | DMA_FROM_DEVICE); |
eeceec90 KA |
3185 | if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) { |
3186 | blogic_err("DMA mapping for sense data buffer failed\n", | |
3187 | adapter); | |
3188 | blogic_dealloc_ccb(ccb, 0); | |
3189 | return SCSI_MLQUEUE_HOST_BUSY; | |
3190 | } | |
3191 | ccb->sensedata = sense_buf; | |
839cb99e KA |
3192 | command->scsi_done = comp_cb; |
3193 | if (blogic_multimaster_type(adapter)) { | |
1da177e4 | 3194 | /* |
839cb99e KA |
3195 | Place the CCB in an Outgoing Mailbox. The higher levels |
3196 | of the SCSI Subsystem should not attempt to queue more | |
3197 | commands than can be placed in Outgoing Mailboxes, so | |
3198 | there should always be one free. In the unlikely event | |
3199 | that there are none available, wait 1 second and try | |
3200 | again. If that fails, the Host Adapter is probably hung | |
3201 | so signal an error as a Host Adapter Hard Reset should | |
3202 | be initiated soon. | |
1da177e4 | 3203 | */ |
839cb99e KA |
3204 | if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) { |
3205 | spin_unlock_irq(adapter->scsi_host->host_lock); | |
3206 | blogic_warn("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", adapter); | |
3207 | blogic_delay(1); | |
3208 | spin_lock_irq(adapter->scsi_host->host_lock); | |
3209 | if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, | |
3210 | ccb)) { | |
3211 | blogic_warn("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", adapter); | |
eeceec90 | 3212 | blogic_dealloc_ccb(ccb, 1); |
839cb99e KA |
3213 | command->result = DID_ERROR << 16; |
3214 | command->scsi_done(command); | |
1da177e4 LT |
3215 | } |
3216 | } | |
3217 | } else { | |
3218 | /* | |
839cb99e KA |
3219 | Call the FlashPoint SCCB Manager to start execution of |
3220 | the CCB. | |
1da177e4 | 3221 | */ |
839cb99e KA |
3222 | ccb->status = BLOGIC_CCB_ACTIVE; |
3223 | adapter->active_cmds[tgt_id]++; | |
3224 | tgt_stats[tgt_id].cmds_tried++; | |
3225 | FlashPoint_StartCCB(adapter->cardhandle, ccb); | |
1da177e4 | 3226 | /* |
839cb99e KA |
3227 | The Command may have already completed and |
3228 | blogic_qcompleted_ccb been called, or it may still be | |
3229 | pending. | |
1da177e4 | 3230 | */ |
839cb99e KA |
3231 | if (ccb->status == BLOGIC_CCB_COMPLETE) |
3232 | blogic_process_ccbs(adapter); | |
1da177e4 LT |
3233 | } |
3234 | return 0; | |
3235 | } | |
3236 | ||
839cb99e | 3237 | static DEF_SCSI_QCMD(blogic_qcmd) |
1da177e4 | 3238 | |
d2afb3ae | 3239 | #if 0 |
1da177e4 | 3240 | /* |
839cb99e | 3241 | blogic_abort aborts Command if possible. |
1da177e4 LT |
3242 | */ |
3243 | ||
839cb99e | 3244 | static int blogic_abort(struct scsi_cmnd *command) |
1da177e4 | 3245 | { |
839cb99e KA |
3246 | struct blogic_adapter *adapter = |
3247 | (struct blogic_adapter *) command->device->host->hostdata; | |
3248 | ||
3249 | int tgt_id = command->device->id; | |
3250 | struct blogic_ccb *ccb; | |
3251 | blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_request); | |
1da177e4 | 3252 | |
1da177e4 | 3253 | /* |
839cb99e KA |
3254 | Attempt to find an Active CCB for this Command. If no Active |
3255 | CCB for this Command is found, then no Abort is necessary. | |
1da177e4 | 3256 | */ |
839cb99e KA |
3257 | for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all) |
3258 | if (ccb->command == command) | |
1da177e4 | 3259 | break; |
839cb99e KA |
3260 | if (ccb == NULL) { |
3261 | blogic_warn("Unable to Abort Command to Target %d - No CCB Found\n", adapter, tgt_id); | |
1da177e4 | 3262 | return SUCCESS; |
839cb99e KA |
3263 | } else if (ccb->status == BLOGIC_CCB_COMPLETE) { |
3264 | blogic_warn("Unable to Abort Command to Target %d - CCB Completed\n", adapter, tgt_id); | |
1da177e4 | 3265 | return SUCCESS; |
839cb99e KA |
3266 | } else if (ccb->status == BLOGIC_CCB_RESET) { |
3267 | blogic_warn("Unable to Abort Command to Target %d - CCB Reset\n", adapter, tgt_id); | |
1da177e4 LT |
3268 | return SUCCESS; |
3269 | } | |
839cb99e | 3270 | if (blogic_multimaster_type(adapter)) { |
1da177e4 | 3271 | /* |
839cb99e KA |
3272 | Attempt to Abort this CCB. MultiMaster Firmware versions |
3273 | prior to 5.xx do not generate Abort Tag messages, but only | |
3274 | generate the non-tagged Abort message. Since non-tagged | |
3275 | commands are not sent by the Host Adapter until the queue | |
3276 | of outstanding tagged commands has completed, and the | |
3277 | Abort message is treated as a non-tagged command, it is | |
3278 | effectively impossible to abort commands when Tagged | |
3279 | Queuing is active. Firmware version 5.xx does generate | |
3280 | Abort Tag messages, so it is possible to abort commands | |
3281 | when Tagged Queuing is active. | |
1da177e4 | 3282 | */ |
839cb99e KA |
3283 | if (adapter->tgt_flags[tgt_id].tagq_active && |
3284 | adapter->fw_ver[0] < '5') { | |
3285 | blogic_warn("Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id); | |
1da177e4 | 3286 | return FAILURE; |
839cb99e KA |
3287 | } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT, |
3288 | ccb)) { | |
3289 | blogic_warn("Aborting CCB #%ld to Target %d\n", | |
3290 | adapter, ccb->serial, tgt_id); | |
3291 | blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried); | |
1da177e4 LT |
3292 | return SUCCESS; |
3293 | } else { | |
839cb99e | 3294 | blogic_warn("Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id); |
1da177e4 LT |
3295 | return FAILURE; |
3296 | } | |
3297 | } else { | |
3298 | /* | |
839cb99e KA |
3299 | Call the FlashPoint SCCB Manager to abort execution of |
3300 | the CCB. | |
1da177e4 | 3301 | */ |
839cb99e KA |
3302 | blogic_warn("Aborting CCB #%ld to Target %d\n", adapter, |
3303 | ccb->serial, tgt_id); | |
3304 | blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried); | |
3305 | FlashPoint_AbortCCB(adapter->cardhandle, ccb); | |
1da177e4 LT |
3306 | /* |
3307 | The Abort may have already been completed and | |
839cb99e | 3308 | blogic_qcompleted_ccb been called, or it |
1da177e4 LT |
3309 | may still be pending. |
3310 | */ | |
839cb99e KA |
3311 | if (ccb->status == BLOGIC_CCB_COMPLETE) |
3312 | blogic_process_ccbs(adapter); | |
1da177e4 LT |
3313 | return SUCCESS; |
3314 | } | |
3315 | return SUCCESS; | |
3316 | } | |
3317 | ||
d2afb3ae | 3318 | #endif |
1da177e4 | 3319 | /* |
839cb99e | 3320 | blogic_resetadapter resets Host Adapter if possible, marking all |
1da177e4 LT |
3321 | currently executing SCSI Commands as having been Reset. |
3322 | */ | |
3323 | ||
839cb99e | 3324 | static int blogic_resetadapter(struct blogic_adapter *adapter, bool hard_reset) |
1da177e4 | 3325 | { |
839cb99e KA |
3326 | struct blogic_ccb *ccb; |
3327 | int tgt_id; | |
1da177e4 LT |
3328 | |
3329 | /* | |
3330 | * Attempt to Reset and Reinitialize the Host Adapter. | |
3331 | */ | |
3332 | ||
839cb99e KA |
3333 | if (!(blogic_hwreset(adapter, hard_reset) && |
3334 | blogic_initadapter(adapter))) { | |
3335 | blogic_err("Resetting %s Failed\n", adapter, | |
3336 | adapter->full_model); | |
1da177e4 LT |
3337 | return FAILURE; |
3338 | } | |
3339 | ||
3340 | /* | |
3341 | * Deallocate all currently executing CCBs. | |
3342 | */ | |
3343 | ||
839cb99e KA |
3344 | for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all) |
3345 | if (ccb->status == BLOGIC_CCB_ACTIVE) | |
eeceec90 | 3346 | blogic_dealloc_ccb(ccb, 1); |
1da177e4 LT |
3347 | /* |
3348 | * Wait a few seconds between the Host Adapter Hard Reset which | |
3349 | * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some | |
3350 | * SCSI devices get confused if they receive SCSI Commands too soon | |
3351 | * after a SCSI Bus Reset. | |
3352 | */ | |
3353 | ||
839cb99e KA |
3354 | if (hard_reset) { |
3355 | spin_unlock_irq(adapter->scsi_host->host_lock); | |
3356 | blogic_delay(adapter->bus_settle_time); | |
3357 | spin_lock_irq(adapter->scsi_host->host_lock); | |
1da177e4 LT |
3358 | } |
3359 | ||
839cb99e KA |
3360 | for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) { |
3361 | adapter->last_resettried[tgt_id] = jiffies; | |
3362 | adapter->last_resetdone[tgt_id] = jiffies; | |
1da177e4 LT |
3363 | } |
3364 | return SUCCESS; | |
3365 | } | |
3366 | ||
3367 | /* | |
839cb99e | 3368 | blogic_diskparam returns the Heads/Sectors/Cylinders BIOS Disk |
1da177e4 LT |
3369 | Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and |
3370 | the appropriate number of cylinders so as not to exceed drive capacity. In | |
3371 | order for disks equal to or larger than 1 GB to be addressable by the BIOS | |
3372 | without exceeding the BIOS limitation of 1024 cylinders, Extended Translation | |
3373 | may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C" | |
3374 | series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A" | |
3375 | series MultiMaster Host Adapters. With Extended Translation enabled, drives | |
3376 | between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128 | |
3377 | heads and 32 sectors, and drives above 2 GB inclusive are given a disk | |
3378 | geometry of 255 heads and 63 sectors. However, if the BIOS detects that the | |
3379 | Extended Translation setting does not match the geometry in the partition | |
3380 | table, then the translation inferred from the partition table will be used by | |
3381 | the BIOS, and a warning may be displayed. | |
3382 | */ | |
3383 | ||
839cb99e KA |
3384 | static int blogic_diskparam(struct scsi_device *sdev, struct block_device *dev, |
3385 | sector_t capacity, int *params) | |
1da177e4 | 3386 | { |
839cb99e KA |
3387 | struct blogic_adapter *adapter = |
3388 | (struct blogic_adapter *) sdev->host->hostdata; | |
3389 | struct bios_diskparam *diskparam = (struct bios_diskparam *) params; | |
1da177e4 | 3390 | unsigned char *buf; |
839cb99e KA |
3391 | |
3392 | if (adapter->ext_trans_enable && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */) { | |
3393 | if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */) { | |
3394 | diskparam->heads = 255; | |
3395 | diskparam->sectors = 63; | |
1da177e4 | 3396 | } else { |
839cb99e KA |
3397 | diskparam->heads = 128; |
3398 | diskparam->sectors = 32; | |
1da177e4 LT |
3399 | } |
3400 | } else { | |
839cb99e KA |
3401 | diskparam->heads = 64; |
3402 | diskparam->sectors = 32; | |
1da177e4 | 3403 | } |
839cb99e KA |
3404 | diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors); |
3405 | buf = scsi_bios_ptable(dev); | |
1da177e4 LT |
3406 | if (buf == NULL) |
3407 | return 0; | |
3408 | /* | |
839cb99e KA |
3409 | If the boot sector partition table flag is valid, search for |
3410 | a partition table entry whose end_head matches one of the | |
3411 | standard BusLogic geometry translations (64/32, 128/32, or 255/63). | |
1da177e4 LT |
3412 | */ |
3413 | if (*(unsigned short *) (buf + 64) == 0xAA55) { | |
839cb99e KA |
3414 | struct partition *part1_entry = (struct partition *) buf; |
3415 | struct partition *part_entry = part1_entry; | |
3416 | int saved_cyl = diskparam->cylinders, part_no; | |
3417 | unsigned char part_end_head = 0, part_end_sector = 0; | |
3418 | ||
3419 | for (part_no = 0; part_no < 4; part_no++) { | |
3420 | part_end_head = part_entry->end_head; | |
3421 | part_end_sector = part_entry->end_sector & 0x3F; | |
3422 | if (part_end_head == 64 - 1) { | |
3423 | diskparam->heads = 64; | |
3424 | diskparam->sectors = 32; | |
1da177e4 | 3425 | break; |
839cb99e KA |
3426 | } else if (part_end_head == 128 - 1) { |
3427 | diskparam->heads = 128; | |
3428 | diskparam->sectors = 32; | |
1da177e4 | 3429 | break; |
839cb99e KA |
3430 | } else if (part_end_head == 255 - 1) { |
3431 | diskparam->heads = 255; | |
3432 | diskparam->sectors = 63; | |
1da177e4 LT |
3433 | break; |
3434 | } | |
839cb99e | 3435 | part_entry++; |
1da177e4 | 3436 | } |
839cb99e KA |
3437 | if (part_no == 4) { |
3438 | part_end_head = part1_entry->end_head; | |
3439 | part_end_sector = part1_entry->end_sector & 0x3F; | |
1da177e4 | 3440 | } |
839cb99e KA |
3441 | diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors); |
3442 | if (part_no < 4 && part_end_sector == diskparam->sectors) { | |
3443 | if (diskparam->cylinders != saved_cyl) | |
3444 | blogic_warn("Adopting Geometry %d/%d from Partition Table\n", adapter, diskparam->heads, diskparam->sectors); | |
3445 | } else if (part_end_head > 0 || part_end_sector > 0) { | |
3446 | blogic_warn("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector); | |
3447 | blogic_warn("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors); | |
1da177e4 LT |
3448 | } |
3449 | } | |
3450 | kfree(buf); | |
3451 | return 0; | |
3452 | } | |
3453 | ||
3454 | ||
3455 | /* | |
3456 | BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>. | |
3457 | */ | |
3458 | ||
839cb99e KA |
3459 | static int blogic_write_info(struct Scsi_Host *shost, char *procbuf, |
3460 | int bytes_avail) | |
1da177e4 | 3461 | { |
839cb99e KA |
3462 | struct blogic_adapter *adapter = |
3463 | (struct blogic_adapter *) shost->hostdata; | |
3464 | struct blogic_tgt_stats *tgt_stats; | |
3465 | ||
3466 | tgt_stats = adapter->tgt_stats; | |
3467 | adapter->ext_resets = 0; | |
3468 | adapter->adapter_intern_errors = 0; | |
3469 | memset(tgt_stats, 0, BLOGIC_MAXDEV * sizeof(struct blogic_tgt_stats)); | |
25daa96f AV |
3470 | return 0; |
3471 | } | |
3472 | ||
839cb99e | 3473 | static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost) |
25daa96f | 3474 | { |
839cb99e KA |
3475 | struct blogic_adapter *adapter = (struct blogic_adapter *) shost->hostdata; |
3476 | struct blogic_tgt_stats *tgt_stats; | |
3477 | int tgt; | |
25daa96f | 3478 | |
839cb99e KA |
3479 | tgt_stats = adapter->tgt_stats; |
3480 | seq_write(m, adapter->msgbuf, adapter->msgbuflen); | |
25daa96f | 3481 | seq_printf(m, "\n\ |
1da177e4 | 3482 | Current Driver Queue Depth: %d\n\ |
839cb99e | 3483 | Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs); |
91c40f24 | 3484 | seq_puts(m, "\n\n\ |
1da177e4 LT |
3485 | DATA TRANSFER STATISTICS\n\ |
3486 | \n\ | |
3487 | Target Tagged Queuing Queue Depth Active Attempted Completed\n\ | |
3488 | ====== ============== =========== ====== ========= =========\n"); | |
839cb99e KA |
3489 | for (tgt = 0; tgt < adapter->maxdev; tgt++) { |
3490 | struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; | |
3491 | if (!tgt_flags->tgt_exists) | |
1da177e4 | 3492 | continue; |
839cb99e | 3493 | seq_printf(m, " %2d %s", tgt, (tgt_flags->tagq_ok ? (tgt_flags->tagq_active ? " Active" : (adapter->tagq_ok & (1 << tgt) |
1da177e4 LT |
3494 | ? " Permitted" : " Disabled")) |
3495 | : "Not Supported")); | |
25daa96f | 3496 | seq_printf(m, |
839cb99e | 3497 | " %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete); |
1da177e4 | 3498 | } |
91c40f24 | 3499 | seq_puts(m, "\n\ |
1da177e4 LT |
3500 | Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\ |
3501 | ====== ============= ============== =================== ===================\n"); | |
839cb99e KA |
3502 | for (tgt = 0; tgt < adapter->maxdev; tgt++) { |
3503 | struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; | |
3504 | if (!tgt_flags->tgt_exists) | |
1da177e4 | 3505 | continue; |
839cb99e KA |
3506 | seq_printf(m, " %2d %9u %9u", tgt, tgt_stats[tgt].read_cmds, tgt_stats[tgt].write_cmds); |
3507 | if (tgt_stats[tgt].bytesread.billions > 0) | |
3508 | seq_printf(m, " %9u%09u", tgt_stats[tgt].bytesread.billions, tgt_stats[tgt].bytesread.units); | |
1da177e4 | 3509 | else |
839cb99e KA |
3510 | seq_printf(m, " %9u", tgt_stats[tgt].bytesread.units); |
3511 | if (tgt_stats[tgt].byteswritten.billions > 0) | |
3512 | seq_printf(m, " %9u%09u\n", tgt_stats[tgt].byteswritten.billions, tgt_stats[tgt].byteswritten.units); | |
1da177e4 | 3513 | else |
839cb99e | 3514 | seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units); |
1da177e4 | 3515 | } |
91c40f24 | 3516 | seq_puts(m, "\n\ |
1da177e4 LT |
3517 | Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\ |
3518 | ====== ======= ========= ========= ========= ========= =========\n"); | |
839cb99e KA |
3519 | for (tgt = 0; tgt < adapter->maxdev; tgt++) { |
3520 | struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; | |
3521 | if (!tgt_flags->tgt_exists) | |
1da177e4 | 3522 | continue; |
25daa96f | 3523 | seq_printf(m, |
839cb99e KA |
3524 | " %2d Read %9u %9u %9u %9u %9u\n", tgt, |
3525 | tgt_stats[tgt].read_sz_buckets[0], | |
3526 | tgt_stats[tgt].read_sz_buckets[1], tgt_stats[tgt].read_sz_buckets[2], tgt_stats[tgt].read_sz_buckets[3], tgt_stats[tgt].read_sz_buckets[4]); | |
25daa96f | 3527 | seq_printf(m, |
839cb99e KA |
3528 | " %2d Write %9u %9u %9u %9u %9u\n", tgt, |
3529 | tgt_stats[tgt].write_sz_buckets[0], | |
3530 | tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]); | |
1da177e4 | 3531 | } |
91c40f24 | 3532 | seq_puts(m, "\n\ |
1da177e4 LT |
3533 | Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\ |
3534 | ====== ======= ========= ========= ========= ========= =========\n"); | |
839cb99e KA |
3535 | for (tgt = 0; tgt < adapter->maxdev; tgt++) { |
3536 | struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; | |
3537 | if (!tgt_flags->tgt_exists) | |
1da177e4 | 3538 | continue; |
25daa96f | 3539 | seq_printf(m, |
839cb99e KA |
3540 | " %2d Read %9u %9u %9u %9u %9u\n", tgt, |
3541 | tgt_stats[tgt].read_sz_buckets[5], | |
3542 | tgt_stats[tgt].read_sz_buckets[6], tgt_stats[tgt].read_sz_buckets[7], tgt_stats[tgt].read_sz_buckets[8], tgt_stats[tgt].read_sz_buckets[9]); | |
25daa96f | 3543 | seq_printf(m, |
839cb99e KA |
3544 | " %2d Write %9u %9u %9u %9u %9u\n", tgt, |
3545 | tgt_stats[tgt].write_sz_buckets[5], | |
3546 | tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]); | |
1da177e4 | 3547 | } |
91c40f24 | 3548 | seq_puts(m, "\n\n\ |
1da177e4 LT |
3549 | ERROR RECOVERY STATISTICS\n\ |
3550 | \n\ | |
3551 | Command Aborts Bus Device Resets Host Adapter Resets\n\ | |
3552 | Target Requested Completed Requested Completed Requested Completed\n\ | |
3553 | ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\ | |
3554 | ====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n"); | |
839cb99e KA |
3555 | for (tgt = 0; tgt < adapter->maxdev; tgt++) { |
3556 | struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; | |
3557 | if (!tgt_flags->tgt_exists) | |
1da177e4 | 3558 | continue; |
20961065 CIK |
3559 | seq_printf(m, " %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n", |
3560 | tgt, tgt_stats[tgt].aborts_request, | |
3561 | tgt_stats[tgt].aborts_tried, | |
3562 | tgt_stats[tgt].aborts_done, | |
3563 | tgt_stats[tgt].bdr_request, | |
3564 | tgt_stats[tgt].bdr_tried, | |
3565 | tgt_stats[tgt].bdr_done, | |
3566 | tgt_stats[tgt].adapter_reset_req, | |
3567 | tgt_stats[tgt].adapter_reset_attempt, | |
3568 | tgt_stats[tgt].adapter_reset_done); | |
1da177e4 | 3569 | } |
839cb99e KA |
3570 | seq_printf(m, "\nExternal Host Adapter Resets: %d\n", adapter->ext_resets); |
3571 | seq_printf(m, "Host Adapter Internal Errors: %d\n", adapter->adapter_intern_errors); | |
25daa96f | 3572 | return 0; |
1da177e4 LT |
3573 | } |
3574 | ||
3575 | ||
3576 | /* | |
839cb99e | 3577 | blogic_msg prints Driver Messages. |
1da177e4 LT |
3578 | */ |
3579 | ||
839cb99e KA |
3580 | static void blogic_msg(enum blogic_msglevel msglevel, char *fmt, |
3581 | struct blogic_adapter *adapter, ...) | |
1da177e4 | 3582 | { |
839cb99e KA |
3583 | static char buf[BLOGIC_LINEBUF_SIZE]; |
3584 | static bool begin = true; | |
3585 | va_list args; | |
3586 | int len = 0; | |
3587 | ||
3588 | va_start(args, adapter); | |
3589 | len = vsprintf(buf, fmt, args); | |
3590 | va_end(args); | |
3591 | if (msglevel == BLOGIC_ANNOUNCE_LEVEL) { | |
3592 | static int msglines = 0; | |
3593 | strcpy(&adapter->msgbuf[adapter->msgbuflen], buf); | |
3594 | adapter->msgbuflen += len; | |
3595 | if (++msglines <= 2) | |
3596 | printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf); | |
3597 | } else if (msglevel == BLOGIC_INFO_LEVEL) { | |
3598 | strcpy(&adapter->msgbuf[adapter->msgbuflen], buf); | |
3599 | adapter->msgbuflen += len; | |
3600 | if (begin) { | |
3601 | if (buf[0] != '\n' || len > 1) | |
3602 | printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); | |
1da177e4 | 3603 | } else |
839cb99e | 3604 | printk("%s", buf); |
1da177e4 | 3605 | } else { |
839cb99e KA |
3606 | if (begin) { |
3607 | if (adapter != NULL && adapter->adapter_initd) | |
3608 | printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); | |
1da177e4 | 3609 | else |
839cb99e | 3610 | printk("%s%s", blogic_msglevelmap[msglevel], buf); |
1da177e4 | 3611 | } else |
839cb99e | 3612 | printk("%s", buf); |
1da177e4 | 3613 | } |
839cb99e | 3614 | begin = (buf[len - 1] == '\n'); |
1da177e4 LT |
3615 | } |
3616 | ||
3617 | ||
3618 | /* | |
839cb99e | 3619 | blogic_parse parses an individual option keyword. It returns true |
1da177e4 LT |
3620 | and updates the pointer if the keyword is recognized and false otherwise. |
3621 | */ | |
3622 | ||
839cb99e | 3623 | static bool __init blogic_parse(char **str, char *keyword) |
1da177e4 | 3624 | { |
839cb99e KA |
3625 | char *pointer = *str; |
3626 | while (*keyword != '\0') { | |
3627 | char strch = *pointer++; | |
3628 | char keywordch = *keyword++; | |
3629 | if (strch >= 'A' && strch <= 'Z') | |
3630 | strch += 'a' - 'Z'; | |
3631 | if (keywordch >= 'A' && keywordch <= 'Z') | |
3632 | keywordch += 'a' - 'Z'; | |
3633 | if (strch != keywordch) | |
1da177e4 LT |
3634 | return false; |
3635 | } | |
839cb99e | 3636 | *str = pointer; |
1da177e4 LT |
3637 | return true; |
3638 | } | |
3639 | ||
3640 | ||
3641 | /* | |
839cb99e | 3642 | blogic_parseopts handles processing of BusLogic Driver Options |
1da177e4 LT |
3643 | specifications. |
3644 | ||
3645 | BusLogic Driver Options may be specified either via the Linux Kernel Command | |
3646 | Line or via the Loadable Kernel Module Installation Facility. Driver Options | |
3647 | for multiple host adapters may be specified either by separating the option | |
3648 | strings by a semicolon, or by specifying multiple "BusLogic=" strings on the | |
3649 | command line. Individual option specifications for a single host adapter are | |
3650 | separated by commas. The Probing and Debugging Options apply to all host | |
3651 | adapters whereas the remaining options apply individually only to the | |
3652 | selected host adapter. | |
3653 | ||
3654 | The BusLogic Driver Probing Options are described in | |
3655 | <file:Documentation/scsi/BusLogic.txt>. | |
3656 | */ | |
3657 | ||
839cb99e | 3658 | static int __init blogic_parseopts(char *options) |
1da177e4 LT |
3659 | { |
3660 | while (true) { | |
839cb99e KA |
3661 | struct blogic_drvr_options *drvr_opts = |
3662 | &blogic_drvr_options[blogic_drvr_options_count++]; | |
3663 | int tgt_id; | |
3664 | ||
3665 | memset(drvr_opts, 0, sizeof(struct blogic_drvr_options)); | |
3666 | while (*options != '\0' && *options != ';') { | |
1da177e4 | 3667 | /* Probing Options. */ |
839cb99e KA |
3668 | if (blogic_parse(&options, "IO:")) { |
3669 | unsigned long io_addr = simple_strtoul(options, | |
3670 | &options, 0); | |
3671 | blogic_probe_options.limited_isa = true; | |
3672 | switch (io_addr) { | |
1da177e4 | 3673 | case 0x330: |
839cb99e | 3674 | blogic_probe_options.probe330 = true; |
1da177e4 LT |
3675 | break; |
3676 | case 0x334: | |
839cb99e | 3677 | blogic_probe_options.probe334 = true; |
1da177e4 LT |
3678 | break; |
3679 | case 0x230: | |
839cb99e | 3680 | blogic_probe_options.probe230 = true; |
1da177e4 LT |
3681 | break; |
3682 | case 0x234: | |
839cb99e | 3683 | blogic_probe_options.probe234 = true; |
1da177e4 LT |
3684 | break; |
3685 | case 0x130: | |
839cb99e | 3686 | blogic_probe_options.probe130 = true; |
1da177e4 LT |
3687 | break; |
3688 | case 0x134: | |
839cb99e | 3689 | blogic_probe_options.probe134 = true; |
1da177e4 LT |
3690 | break; |
3691 | default: | |
839cb99e | 3692 | blogic_err("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, io_addr); |
1da177e4 LT |
3693 | return 0; |
3694 | } | |
839cb99e KA |
3695 | } else if (blogic_parse(&options, "NoProbeISA")) |
3696 | blogic_probe_options.noprobe_isa = true; | |
3697 | else if (blogic_parse(&options, "NoProbePCI")) | |
3698 | blogic_probe_options.noprobe_pci = true; | |
3699 | else if (blogic_parse(&options, "NoProbe")) | |
3700 | blogic_probe_options.noprobe = true; | |
3701 | else if (blogic_parse(&options, "NoSortPCI")) | |
3702 | blogic_probe_options.nosort_pci = true; | |
3703 | else if (blogic_parse(&options, "MultiMasterFirst")) | |
3704 | blogic_probe_options.multimaster_first = true; | |
3705 | else if (blogic_parse(&options, "FlashPointFirst")) | |
3706 | blogic_probe_options.flashpoint_first = true; | |
1da177e4 | 3707 | /* Tagged Queuing Options. */ |
839cb99e KA |
3708 | else if (blogic_parse(&options, "QueueDepth:[") || |
3709 | blogic_parse(&options, "QD:[")) { | |
3710 | for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) { | |
3711 | unsigned short qdepth = simple_strtoul(options, &options, 0); | |
3712 | if (qdepth > BLOGIC_MAX_TAG_DEPTH) { | |
3713 | blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth); | |
1da177e4 LT |
3714 | return 0; |
3715 | } | |
839cb99e KA |
3716 | drvr_opts->qdepth[tgt_id] = qdepth; |
3717 | if (*options == ',') | |
3718 | options++; | |
3719 | else if (*options == ']') | |
1da177e4 LT |
3720 | break; |
3721 | else { | |
839cb99e | 3722 | blogic_err("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, options); |
1da177e4 LT |
3723 | return 0; |
3724 | } | |
3725 | } | |
839cb99e KA |
3726 | if (*options != ']') { |
3727 | blogic_err("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, options); | |
1da177e4 LT |
3728 | return 0; |
3729 | } else | |
839cb99e KA |
3730 | options++; |
3731 | } else if (blogic_parse(&options, "QueueDepth:") || blogic_parse(&options, "QD:")) { | |
3732 | unsigned short qdepth = simple_strtoul(options, &options, 0); | |
3733 | if (qdepth == 0 || | |
3734 | qdepth > BLOGIC_MAX_TAG_DEPTH) { | |
3735 | blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth); | |
1da177e4 LT |
3736 | return 0; |
3737 | } | |
839cb99e KA |
3738 | drvr_opts->common_qdepth = qdepth; |
3739 | for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) | |
3740 | drvr_opts->qdepth[tgt_id] = qdepth; | |
3741 | } else if (blogic_parse(&options, "TaggedQueuing:") || | |
3742 | blogic_parse(&options, "TQ:")) { | |
3743 | if (blogic_parse(&options, "Default")) { | |
3744 | drvr_opts->tagq_ok = 0x0000; | |
3745 | drvr_opts->tagq_ok_mask = 0x0000; | |
3746 | } else if (blogic_parse(&options, "Enable")) { | |
3747 | drvr_opts->tagq_ok = 0xFFFF; | |
3748 | drvr_opts->tagq_ok_mask = 0xFFFF; | |
3749 | } else if (blogic_parse(&options, "Disable")) { | |
3750 | drvr_opts->tagq_ok = 0x0000; | |
3751 | drvr_opts->tagq_ok_mask = 0xFFFF; | |
1da177e4 | 3752 | } else { |
839cb99e KA |
3753 | unsigned short tgt_bit; |
3754 | for (tgt_id = 0, tgt_bit = 1; | |
3755 | tgt_id < BLOGIC_MAXDEV; | |
3756 | tgt_id++, tgt_bit <<= 1) | |
3757 | switch (*options++) { | |
1da177e4 | 3758 | case 'Y': |
839cb99e KA |
3759 | drvr_opts->tagq_ok |= tgt_bit; |
3760 | drvr_opts->tagq_ok_mask |= tgt_bit; | |
1da177e4 LT |
3761 | break; |
3762 | case 'N': | |
839cb99e KA |
3763 | drvr_opts->tagq_ok &= ~tgt_bit; |
3764 | drvr_opts->tagq_ok_mask |= tgt_bit; | |
1da177e4 LT |
3765 | break; |
3766 | case 'X': | |
3767 | break; | |
3768 | default: | |
839cb99e KA |
3769 | options--; |
3770 | tgt_id = BLOGIC_MAXDEV; | |
1da177e4 LT |
3771 | break; |
3772 | } | |
3773 | } | |
3774 | } | |
3775 | /* Miscellaneous Options. */ | |
839cb99e KA |
3776 | else if (blogic_parse(&options, "BusSettleTime:") || |
3777 | blogic_parse(&options, "BST:")) { | |
3778 | unsigned short bus_settle_time = | |
3779 | simple_strtoul(options, &options, 0); | |
3780 | if (bus_settle_time > 5 * 60) { | |
3781 | blogic_err("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, bus_settle_time); | |
1da177e4 LT |
3782 | return 0; |
3783 | } | |
839cb99e KA |
3784 | drvr_opts->bus_settle_time = bus_settle_time; |
3785 | } else if (blogic_parse(&options, | |
3786 | "InhibitTargetInquiry")) | |
3787 | drvr_opts->stop_tgt_inquiry = true; | |
1da177e4 | 3788 | /* Debugging Options. */ |
839cb99e KA |
3789 | else if (blogic_parse(&options, "TraceProbe")) |
3790 | blogic_global_options.trace_probe = true; | |
3791 | else if (blogic_parse(&options, "TraceHardwareReset")) | |
3792 | blogic_global_options.trace_hw_reset = true; | |
3793 | else if (blogic_parse(&options, "TraceConfiguration")) | |
3794 | blogic_global_options.trace_config = true; | |
3795 | else if (blogic_parse(&options, "TraceErrors")) | |
3796 | blogic_global_options.trace_err = true; | |
3797 | else if (blogic_parse(&options, "Debug")) { | |
3798 | blogic_global_options.trace_probe = true; | |
3799 | blogic_global_options.trace_hw_reset = true; | |
3800 | blogic_global_options.trace_config = true; | |
3801 | blogic_global_options.trace_err = true; | |
1da177e4 | 3802 | } |
839cb99e KA |
3803 | if (*options == ',') |
3804 | options++; | |
3805 | else if (*options != ';' && *options != '\0') { | |
3806 | blogic_err("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, options); | |
3807 | *options = '\0'; | |
1da177e4 LT |
3808 | } |
3809 | } | |
839cb99e KA |
3810 | if (!(blogic_drvr_options_count == 0 || |
3811 | blogic_probeinfo_count == 0 || | |
3812 | blogic_drvr_options_count == blogic_probeinfo_count)) { | |
3813 | blogic_err("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL); | |
1da177e4 LT |
3814 | return 0; |
3815 | } | |
3816 | /* | |
3817 | Tagged Queuing is disabled when the Queue Depth is 1 since queuing | |
3818 | multiple commands is not possible. | |
3819 | */ | |
839cb99e KA |
3820 | for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) |
3821 | if (drvr_opts->qdepth[tgt_id] == 1) { | |
3822 | unsigned short tgt_bit = 1 << tgt_id; | |
3823 | drvr_opts->tagq_ok &= ~tgt_bit; | |
3824 | drvr_opts->tagq_ok_mask |= tgt_bit; | |
1da177e4 | 3825 | } |
839cb99e KA |
3826 | if (*options == ';') |
3827 | options++; | |
3828 | if (*options == '\0') | |
1da177e4 LT |
3829 | return 0; |
3830 | } | |
3831 | return 1; | |
3832 | } | |
3833 | ||
3834 | /* | |
3835 | Get it all started | |
3836 | */ | |
3837 | ||
839cb99e | 3838 | static struct scsi_host_template blogic_template = { |
1da177e4 LT |
3839 | .module = THIS_MODULE, |
3840 | .proc_name = "BusLogic", | |
839cb99e KA |
3841 | .write_info = blogic_write_info, |
3842 | .show_info = blogic_show_info, | |
1da177e4 | 3843 | .name = "BusLogic", |
839cb99e KA |
3844 | .info = blogic_drvr_info, |
3845 | .queuecommand = blogic_qcmd, | |
3846 | .slave_configure = blogic_slaveconfig, | |
3847 | .bios_param = blogic_diskparam, | |
3848 | .eh_host_reset_handler = blogic_hostreset, | |
1da177e4 | 3849 | #if 0 |
839cb99e | 3850 | .eh_abort_handler = blogic_abort, |
1da177e4 LT |
3851 | #endif |
3852 | .unchecked_isa_dma = 1, | |
3853 | .max_sectors = 128, | |
1da177e4 LT |
3854 | }; |
3855 | ||
3856 | /* | |
839cb99e | 3857 | blogic_setup handles processing of Kernel Command Line Arguments. |
1da177e4 LT |
3858 | */ |
3859 | ||
839cb99e | 3860 | static int __init blogic_setup(char *str) |
1da177e4 LT |
3861 | { |
3862 | int ints[3]; | |
3863 | ||
3864 | (void) get_options(str, ARRAY_SIZE(ints), ints); | |
3865 | ||
3866 | if (ints[0] != 0) { | |
839cb99e | 3867 | blogic_err("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL); |
1da177e4 LT |
3868 | return 0; |
3869 | } | |
3870 | if (str == NULL || *str == '\0') | |
3871 | return 0; | |
839cb99e | 3872 | return blogic_parseopts(str); |
1da177e4 LT |
3873 | } |
3874 | ||
3875 | /* | |
3876 | * Exit function. Deletes all hosts associated with this driver. | |
3877 | */ | |
3878 | ||
839cb99e | 3879 | static void __exit blogic_exit(void) |
1da177e4 | 3880 | { |
839cb99e | 3881 | struct blogic_adapter *ha, *next; |
1da177e4 | 3882 | |
839cb99e KA |
3883 | list_for_each_entry_safe(ha, next, &blogic_host_list, host_list) |
3884 | blogic_deladapter(ha); | |
1da177e4 LT |
3885 | } |
3886 | ||
839cb99e | 3887 | __setup("BusLogic=", blogic_setup); |
1da177e4 | 3888 | |
1079a2d2 | 3889 | #ifdef MODULE |
839cb99e | 3890 | /*static struct pci_device_id blogic_pci_tbl[] = { |
745b5715 BC |
3891 | { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, |
3892 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
3893 | { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, | |
3894 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
3895 | { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, | |
3896 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
3897 | { } | |
839cb99e | 3898 | };*/ |
9baa3c34 | 3899 | static const struct pci_device_id blogic_pci_tbl[] = { |
839cb99e KA |
3900 | {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER)}, |
3901 | {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC)}, | |
3902 | {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT)}, | |
3903 | {0, }, | |
745b5715 | 3904 | }; |
1079a2d2 | 3905 | #endif |
839cb99e | 3906 | MODULE_DEVICE_TABLE(pci, blogic_pci_tbl); |
745b5715 | 3907 | |
839cb99e KA |
3908 | module_init(blogic_init); |
3909 | module_exit(blogic_exit); |