]>
Commit | Line | Data |
---|---|---|
58751759 | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
1da177e4 LT |
2 | /* |
3 | ||
4 | Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters | |
5 | ||
6 | Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> | |
7 | ||
1da177e4 LT |
8 | |
9 | The author respectfully requests that any modifications to this software be | |
10 | sent directly to him for evaluation and testing. | |
11 | ||
12 | Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose | |
13 | advice has been invaluable, to David Gentzel, for writing the original Linux | |
14 | BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. | |
15 | ||
16 | Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB | |
17 | Manager available as freely redistributable source code. | |
18 | ||
19 | */ | |
20 | ||
21 | #ifndef _BUSLOGIC_H | |
22 | #define _BUSLOGIC_H | |
23 | ||
1da177e4 LT |
24 | |
25 | #ifndef PACKED | |
26 | #define PACKED __attribute__((packed)) | |
27 | #endif | |
28 | ||
1da177e4 LT |
29 | /* |
30 | Define the maximum number of BusLogic Host Adapters supported by this driver. | |
31 | */ | |
32 | ||
839cb99e | 33 | #define BLOGIC_MAX_ADAPTERS 16 |
1da177e4 LT |
34 | |
35 | ||
36 | /* | |
37 | Define the maximum number of Target Devices supported by this driver. | |
38 | */ | |
39 | ||
839cb99e | 40 | #define BLOGIC_MAXDEV 16 |
1da177e4 LT |
41 | |
42 | ||
43 | /* | |
44 | Define the maximum number of Scatter/Gather Segments used by this driver. | |
45 | For optimal performance, it is important that this limit be at least as | |
46 | large as the largest single request generated by the I/O Subsystem. | |
47 | */ | |
48 | ||
839cb99e | 49 | #define BLOGIC_SG_LIMIT 128 |
1da177e4 LT |
50 | |
51 | ||
52 | /* | |
53 | Define the maximum, maximum automatic, minimum automatic, and default Queue | |
54 | Depth to allow for Target Devices depending on whether or not they support | |
55 | Tagged Queuing and whether or not ISA Bounce Buffers are required. | |
56 | */ | |
57 | ||
839cb99e KA |
58 | #define BLOGIC_MAX_TAG_DEPTH 64 |
59 | #define BLOGIC_MAX_AUTO_TAG_DEPTH 28 | |
60 | #define BLOGIC_MIN_AUTO_TAG_DEPTH 7 | |
61 | #define BLOGIC_TAG_DEPTH_BB 3 | |
62 | #define BLOGIC_UNTAG_DEPTH 3 | |
63 | #define BLOGIC_UNTAG_DEPTH_BB 2 | |
1da177e4 LT |
64 | |
65 | ||
66 | /* | |
67 | Define the default amount of time in seconds to wait between a Host Adapter | |
68 | Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands. | |
69 | Some SCSI devices get confused if they receive SCSI commands too soon after | |
70 | a SCSI Bus Reset. | |
71 | */ | |
72 | ||
839cb99e | 73 | #define BLOGIC_BUS_SETTLE_TIME 2 |
1da177e4 LT |
74 | |
75 | ||
76 | /* | |
77 | Define the maximum number of Mailboxes that should be used for MultiMaster | |
78 | Host Adapters. This number is chosen to be larger than the maximum Host | |
79 | Adapter Queue Depth and small enough so that the Host Adapter structure | |
80 | does not cross an allocation block size boundary. | |
81 | */ | |
82 | ||
839cb99e | 83 | #define BLOGIC_MAX_MAILBOX 211 |
1da177e4 LT |
84 | |
85 | ||
86 | /* | |
87 | Define the number of CCBs that should be allocated as a group to optimize | |
88 | Kernel memory allocation. | |
89 | */ | |
90 | ||
839cb99e | 91 | #define BLOGIC_CCB_GRP_ALLOCSIZE 7 |
1da177e4 LT |
92 | |
93 | ||
94 | /* | |
95 | Define the Host Adapter Line and Message Buffer Sizes. | |
96 | */ | |
97 | ||
839cb99e KA |
98 | #define BLOGIC_LINEBUF_SIZE 100 |
99 | #define BLOGIC_MSGBUF_SIZE 9700 | |
1da177e4 LT |
100 | |
101 | ||
102 | /* | |
103 | Define the Driver Message Levels. | |
104 | */ | |
105 | ||
839cb99e KA |
106 | enum blogic_msglevel { |
107 | BLOGIC_ANNOUNCE_LEVEL = 0, | |
108 | BLOGIC_INFO_LEVEL = 1, | |
109 | BLOGIC_NOTICE_LEVEL = 2, | |
110 | BLOGIC_WARN_LEVEL = 3, | |
111 | BLOGIC_ERR_LEVEL = 4 | |
1da177e4 LT |
112 | }; |
113 | ||
839cb99e | 114 | static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR }; |
1da177e4 LT |
115 | |
116 | ||
117 | /* | |
118 | Define Driver Message macros. | |
119 | */ | |
120 | ||
839cb99e KA |
121 | #define blogic_announce(format, args...) \ |
122 | blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args) | |
1da177e4 | 123 | |
839cb99e KA |
124 | #define blogic_info(format, args...) \ |
125 | blogic_msg(BLOGIC_INFO_LEVEL, format, ##args) | |
1da177e4 | 126 | |
839cb99e KA |
127 | #define blogic_notice(format, args...) \ |
128 | blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args) | |
1da177e4 | 129 | |
839cb99e KA |
130 | #define blogic_warn(format, args...) \ |
131 | blogic_msg(BLOGIC_WARN_LEVEL, format, ##args) | |
1da177e4 | 132 | |
839cb99e KA |
133 | #define blogic_err(format, args...) \ |
134 | blogic_msg(BLOGIC_ERR_LEVEL, format, ##args) | |
1da177e4 LT |
135 | |
136 | ||
137 | /* | |
138 | Define the types of BusLogic Host Adapters that are supported and the number | |
139 | of I/O Addresses required by each type. | |
140 | */ | |
141 | ||
839cb99e KA |
142 | enum blogic_adapter_type { |
143 | BLOGIC_MULTIMASTER = 1, | |
144 | BLOGIC_FLASHPOINT = 2 | |
1da177e4 LT |
145 | } PACKED; |
146 | ||
839cb99e KA |
147 | #define BLOGIC_MULTIMASTER_ADDR_COUNT 4 |
148 | #define BLOGIC_FLASHPOINT_ADDR_COUNT 256 | |
1da177e4 | 149 | |
839cb99e | 150 | static int blogic_adapter_addr_count[3] = { 0, BLOGIC_MULTIMASTER_ADDR_COUNT, BLOGIC_FLASHPOINT_ADDR_COUNT }; |
1da177e4 LT |
151 | |
152 | ||
153 | /* | |
154 | Define macros for testing the Host Adapter Type. | |
155 | */ | |
156 | ||
78b4b05d | 157 | #ifdef CONFIG_SCSI_FLASHPOINT |
1da177e4 | 158 | |
839cb99e KA |
159 | #define blogic_multimaster_type(adapter) \ |
160 | (adapter->adapter_type == BLOGIC_MULTIMASTER) | |
1da177e4 | 161 | |
839cb99e KA |
162 | #define blogic_flashpoint_type(adapter) \ |
163 | (adapter->adapter_type == BLOGIC_FLASHPOINT) | |
1da177e4 LT |
164 | |
165 | #else | |
166 | ||
839cb99e KA |
167 | #define blogic_multimaster_type(adapter) (true) |
168 | #define blogic_flashpoint_type(adapter) (false) | |
1da177e4 LT |
169 | |
170 | #endif | |
171 | ||
172 | ||
173 | /* | |
174 | Define the possible Host Adapter Bus Types. | |
175 | */ | |
176 | ||
839cb99e KA |
177 | enum blogic_adapter_bus_type { |
178 | BLOGIC_UNKNOWN_BUS = 0, | |
179 | BLOGIC_ISA_BUS = 1, | |
180 | BLOGIC_EISA_BUS = 2, | |
181 | BLOGIC_PCI_BUS = 3, | |
182 | BLOGIC_VESA_BUS = 4, | |
183 | BLOGIC_MCA_BUS = 5 | |
1da177e4 LT |
184 | } PACKED; |
185 | ||
839cb99e | 186 | static char *blogic_adapter_busnames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" }; |
1da177e4 | 187 | |
839cb99e KA |
188 | static enum blogic_adapter_bus_type blogic_adater_bus_types[] = { |
189 | BLOGIC_VESA_BUS, /* BT-4xx */ | |
190 | BLOGIC_ISA_BUS, /* BT-5xx */ | |
191 | BLOGIC_MCA_BUS, /* BT-6xx */ | |
192 | BLOGIC_EISA_BUS, /* BT-7xx */ | |
193 | BLOGIC_UNKNOWN_BUS, /* BT-8xx */ | |
194 | BLOGIC_PCI_BUS /* BT-9xx */ | |
1da177e4 LT |
195 | }; |
196 | ||
197 | /* | |
198 | Define the possible Host Adapter BIOS Disk Geometry Translations. | |
199 | */ | |
200 | ||
839cb99e KA |
201 | enum blogic_bios_diskgeometry { |
202 | BLOGIC_BIOS_NODISK = 0, | |
203 | BLOGIC_BIOS_DISK64x32 = 1, | |
204 | BLOGIC_BIOS_DISK128x32 = 2, | |
205 | BLOGIC_BIOS_DISK255x63 = 3 | |
1da177e4 LT |
206 | } PACKED; |
207 | ||
208 | ||
1da177e4 LT |
209 | /* |
210 | Define a 10^18 Statistics Byte Counter data type. | |
211 | */ | |
212 | ||
839cb99e KA |
213 | struct blogic_byte_count { |
214 | unsigned int units; | |
215 | unsigned int billions; | |
1da177e4 LT |
216 | }; |
217 | ||
218 | ||
219 | /* | |
220 | Define the structure for I/O Address and Bus Probing Information. | |
221 | */ | |
222 | ||
839cb99e KA |
223 | struct blogic_probeinfo { |
224 | enum blogic_adapter_type adapter_type; | |
225 | enum blogic_adapter_bus_type adapter_bus_type; | |
226 | unsigned long io_addr; | |
227 | unsigned long pci_addr; | |
228 | struct pci_dev *pci_device; | |
229 | unsigned char bus; | |
230 | unsigned char dev; | |
231 | unsigned char irq_ch; | |
1da177e4 LT |
232 | }; |
233 | ||
234 | /* | |
235 | Define the Probe Options. | |
236 | */ | |
237 | ||
839cb99e KA |
238 | struct blogic_probe_options { |
239 | bool noprobe:1; /* Bit 0 */ | |
839cb99e KA |
240 | bool noprobe_pci:1; /* Bit 2 */ |
241 | bool nosort_pci:1; /* Bit 3 */ | |
242 | bool multimaster_first:1; /* Bit 4 */ | |
243 | bool flashpoint_first:1; /* Bit 5 */ | |
1da177e4 LT |
244 | }; |
245 | ||
246 | /* | |
247 | Define the Global Options. | |
248 | */ | |
249 | ||
839cb99e KA |
250 | struct blogic_global_options { |
251 | bool trace_probe:1; /* Bit 0 */ | |
252 | bool trace_hw_reset:1; /* Bit 1 */ | |
253 | bool trace_config:1; /* Bit 2 */ | |
254 | bool trace_err:1; /* Bit 3 */ | |
1da177e4 LT |
255 | }; |
256 | ||
257 | /* | |
258 | Define the BusLogic SCSI Host Adapter I/O Register Offsets. | |
259 | */ | |
260 | ||
839cb99e KA |
261 | #define BLOGIC_CNTRL_REG 0 /* WO register */ |
262 | #define BLOGIC_STATUS_REG 0 /* RO register */ | |
263 | #define BLOGIC_CMD_PARM_REG 1 /* WO register */ | |
264 | #define BLOGIC_DATAIN_REG 1 /* RO register */ | |
265 | #define BLOGIC_INT_REG 2 /* RO register */ | |
266 | #define BLOGIC_GEOMETRY_REG 3 /* RO register */ | |
1da177e4 LT |
267 | |
268 | /* | |
269 | Define the structure of the write-only Control Register. | |
270 | */ | |
271 | ||
839cb99e KA |
272 | union blogic_cntrl_reg { |
273 | unsigned char all; | |
1da177e4 LT |
274 | struct { |
275 | unsigned char:4; /* Bits 0-3 */ | |
839cb99e KA |
276 | bool bus_reset:1; /* Bit 4 */ |
277 | bool int_reset:1; /* Bit 5 */ | |
278 | bool soft_reset:1; /* Bit 6 */ | |
279 | bool hard_reset:1; /* Bit 7 */ | |
1da177e4 LT |
280 | } cr; |
281 | }; | |
282 | ||
283 | /* | |
284 | Define the structure of the read-only Status Register. | |
285 | */ | |
286 | ||
839cb99e KA |
287 | union blogic_stat_reg { |
288 | unsigned char all; | |
1da177e4 | 289 | struct { |
839cb99e KA |
290 | bool cmd_invalid:1; /* Bit 0 */ |
291 | bool rsvd:1; /* Bit 1 */ | |
292 | bool datain_ready:1; /* Bit 2 */ | |
293 | bool cmd_param_busy:1; /* Bit 3 */ | |
294 | bool adapter_ready:1; /* Bit 4 */ | |
295 | bool init_reqd:1; /* Bit 5 */ | |
296 | bool diag_failed:1; /* Bit 6 */ | |
297 | bool diag_active:1; /* Bit 7 */ | |
1da177e4 LT |
298 | } sr; |
299 | }; | |
300 | ||
301 | /* | |
302 | Define the structure of the read-only Interrupt Register. | |
303 | */ | |
304 | ||
839cb99e KA |
305 | union blogic_int_reg { |
306 | unsigned char all; | |
1da177e4 | 307 | struct { |
839cb99e KA |
308 | bool mailin_loaded:1; /* Bit 0 */ |
309 | bool mailout_avail:1; /* Bit 1 */ | |
310 | bool cmd_complete:1; /* Bit 2 */ | |
311 | bool ext_busreset:1; /* Bit 3 */ | |
312 | unsigned char rsvd:3; /* Bits 4-6 */ | |
313 | bool int_valid:1; /* Bit 7 */ | |
1da177e4 LT |
314 | } ir; |
315 | }; | |
316 | ||
317 | /* | |
318 | Define the structure of the read-only Geometry Register. | |
319 | */ | |
320 | ||
839cb99e KA |
321 | union blogic_geo_reg { |
322 | unsigned char all; | |
1da177e4 | 323 | struct { |
839cb99e KA |
324 | enum blogic_bios_diskgeometry d0_geo:2; /* Bits 0-1 */ |
325 | enum blogic_bios_diskgeometry d1_geo:2; /* Bits 2-3 */ | |
1da177e4 | 326 | unsigned char:3; /* Bits 4-6 */ |
839cb99e | 327 | bool ext_trans_enable:1; /* Bit 7 */ |
1da177e4 LT |
328 | } gr; |
329 | }; | |
330 | ||
331 | /* | |
332 | Define the BusLogic SCSI Host Adapter Command Register Operation Codes. | |
333 | */ | |
334 | ||
839cb99e KA |
335 | enum blogic_opcode { |
336 | BLOGIC_TEST_CMP_COMPLETE = 0x00, | |
337 | BLOGIC_INIT_MBOX = 0x01, | |
338 | BLOGIC_EXEC_MBOX_CMD = 0x02, | |
339 | BLOGIC_EXEC_BIOS_CMD = 0x03, | |
340 | BLOGIC_GET_BOARD_ID = 0x04, | |
341 | BLOGIC_ENABLE_OUTBOX_AVAIL_INT = 0x05, | |
342 | BLOGIC_SET_SELECT_TIMEOUT = 0x06, | |
343 | BLOGIC_SET_PREEMPT_TIME = 0x07, | |
344 | BLOGIC_SET_TIMEOFF_BUS = 0x08, | |
345 | BLOGIC_SET_TXRATE = 0x09, | |
346 | BLOGIC_INQ_DEV0TO7 = 0x0A, | |
347 | BLOGIC_INQ_CONFIG = 0x0B, | |
348 | BLOGIC_TGT_MODE = 0x0C, | |
349 | BLOGIC_INQ_SETUPINFO = 0x0D, | |
350 | BLOGIC_WRITE_LOCALRAM = 0x1A, | |
351 | BLOGIC_READ_LOCALRAM = 0x1B, | |
352 | BLOGIC_WRITE_BUSMASTER_FIFO = 0x1C, | |
353 | BLOGIC_READ_BUSMASTER_FIFO = 0x1D, | |
354 | BLOGIC_ECHO_CMDDATA = 0x1F, | |
355 | BLOGIC_ADAPTER_DIAG = 0x20, | |
356 | BLOGIC_SET_OPTIONS = 0x21, | |
357 | BLOGIC_INQ_DEV8TO15 = 0x23, | |
358 | BLOGIC_INQ_DEV = 0x24, | |
359 | BLOGIC_DISABLE_INT = 0x25, | |
360 | BLOGIC_INIT_EXT_MBOX = 0x81, | |
361 | BLOGIC_EXEC_SCS_CMD = 0x83, | |
362 | BLOGIC_INQ_FWVER_D3 = 0x84, | |
363 | BLOGIC_INQ_FWVER_LETTER = 0x85, | |
364 | BLOGIC_INQ_PCI_INFO = 0x86, | |
365 | BLOGIC_INQ_MODELNO = 0x8B, | |
366 | BLOGIC_INQ_SYNC_PERIOD = 0x8C, | |
367 | BLOGIC_INQ_EXTSETUP = 0x8D, | |
368 | BLOGIC_STRICT_RR = 0x8F, | |
369 | BLOGIC_STORE_LOCALRAM = 0x90, | |
370 | BLOGIC_FETCH_LOCALRAM = 0x91, | |
371 | BLOGIC_STORE_TO_EEPROM = 0x92, | |
372 | BLOGIC_LOAD_AUTOSCSICODE = 0x94, | |
373 | BLOGIC_MOD_IOADDR = 0x95, | |
374 | BLOGIC_SETCCB_FMT = 0x96, | |
375 | BLOGIC_WRITE_INQBUF = 0x9A, | |
376 | BLOGIC_READ_INQBUF = 0x9B, | |
377 | BLOGIC_FLASH_LOAD = 0xA7, | |
378 | BLOGIC_READ_SCAMDATA = 0xA8, | |
379 | BLOGIC_WRITE_SCAMDATA = 0xA9 | |
1da177e4 LT |
380 | }; |
381 | ||
382 | /* | |
383 | Define the Inquire Board ID reply structure. | |
384 | */ | |
385 | ||
839cb99e KA |
386 | struct blogic_board_id { |
387 | unsigned char type; /* Byte 0 */ | |
388 | unsigned char custom_features; /* Byte 1 */ | |
389 | unsigned char fw_ver_digit1; /* Byte 2 */ | |
390 | unsigned char fw_ver_digit2; /* Byte 3 */ | |
1da177e4 LT |
391 | }; |
392 | ||
393 | /* | |
394 | Define the Inquire Configuration reply structure. | |
395 | */ | |
396 | ||
839cb99e | 397 | struct blogic_config { |
1da177e4 | 398 | unsigned char:5; /* Byte 0 Bits 0-4 */ |
839cb99e KA |
399 | bool dma_ch5:1; /* Byte 0 Bit 5 */ |
400 | bool dma_ch6:1; /* Byte 0 Bit 6 */ | |
401 | bool dma_ch7:1; /* Byte 0 Bit 7 */ | |
402 | bool irq_ch9:1; /* Byte 1 Bit 0 */ | |
403 | bool irq_ch10:1; /* Byte 1 Bit 1 */ | |
404 | bool irq_ch11:1; /* Byte 1 Bit 2 */ | |
405 | bool irq_ch12:1; /* Byte 1 Bit 3 */ | |
1da177e4 | 406 | unsigned char:1; /* Byte 1 Bit 4 */ |
839cb99e KA |
407 | bool irq_ch14:1; /* Byte 1 Bit 5 */ |
408 | bool irq_ch15:1; /* Byte 1 Bit 6 */ | |
1da177e4 | 409 | unsigned char:1; /* Byte 1 Bit 7 */ |
839cb99e | 410 | unsigned char id:4; /* Byte 2 Bits 0-3 */ |
1da177e4 LT |
411 | unsigned char:4; /* Byte 2 Bits 4-7 */ |
412 | }; | |
413 | ||
414 | /* | |
415 | Define the Inquire Setup Information reply structure. | |
416 | */ | |
417 | ||
839cb99e KA |
418 | struct blogic_syncval { |
419 | unsigned char offset:4; /* Bits 0-3 */ | |
420 | unsigned char tx_period:3; /* Bits 4-6 */ | |
421 | bool sync:1; /* Bit 7 */ | |
1da177e4 LT |
422 | }; |
423 | ||
839cb99e KA |
424 | struct blogic_setup_info { |
425 | bool sync:1; /* Byte 0 Bit 0 */ | |
426 | bool parity:1; /* Byte 0 Bit 1 */ | |
427 | unsigned char:6; /* Byte 0 Bits 2-7 */ | |
428 | unsigned char tx_rate; /* Byte 1 */ | |
429 | unsigned char preempt_time; /* Byte 2 */ | |
430 | unsigned char timeoff_bus; /* Byte 3 */ | |
431 | unsigned char mbox_count; /* Byte 4 */ | |
432 | unsigned char mbox_addr[3]; /* Bytes 5-7 */ | |
433 | struct blogic_syncval sync0to7[8]; /* Bytes 8-15 */ | |
434 | unsigned char disconnect_ok0to7; /* Byte 16 */ | |
435 | unsigned char sig; /* Byte 17 */ | |
436 | unsigned char char_d; /* Byte 18 */ | |
437 | unsigned char bus_type; /* Byte 19 */ | |
438 | unsigned char wide_tx_ok0to7; /* Byte 20 */ | |
439 | unsigned char wide_tx_active0to7; /* Byte 21 */ | |
440 | struct blogic_syncval sync8to15[8]; /* Bytes 22-29 */ | |
441 | unsigned char disconnect_ok8to15; /* Byte 30 */ | |
442 | unsigned char:8; /* Byte 31 */ | |
443 | unsigned char wide_tx_ok8to15; /* Byte 32 */ | |
444 | unsigned char wide_tx_active8to15; /* Byte 33 */ | |
1da177e4 LT |
445 | }; |
446 | ||
447 | /* | |
448 | Define the Initialize Extended Mailbox request structure. | |
449 | */ | |
450 | ||
839cb99e KA |
451 | struct blogic_extmbox_req { |
452 | unsigned char mbox_count; /* Byte 0 */ | |
453 | u32 base_mbox_addr; /* Bytes 1-4 */ | |
1da177e4 LT |
454 | } PACKED; |
455 | ||
456 | ||
457 | /* | |
458 | Define the Inquire PCI Host Adapter Information reply type. The ISA | |
459 | Compatible I/O Port values are defined here and are also used with | |
460 | the Modify I/O Address command. | |
461 | */ | |
462 | ||
839cb99e KA |
463 | enum blogic_isa_ioport { |
464 | BLOGIC_IO_330 = 0, | |
465 | BLOGIC_IO_334 = 1, | |
466 | BLOGIC_IO_230 = 2, | |
467 | BLOGIC_IO_234 = 3, | |
468 | BLOGIC_IO_130 = 4, | |
469 | BLOGIC_IO_134 = 5, | |
470 | BLOGIC_IO_DISABLE = 6, | |
471 | BLOGIC_IO_DISABLE2 = 7 | |
1da177e4 LT |
472 | } PACKED; |
473 | ||
839cb99e KA |
474 | struct blogic_adapter_info { |
475 | enum blogic_isa_ioport isa_port; /* Byte 0 */ | |
476 | unsigned char irq_ch; /* Byte 1 */ | |
477 | bool low_term:1; /* Byte 2 Bit 0 */ | |
478 | bool high_term:1; /* Byte 2 Bit 1 */ | |
479 | unsigned char:2; /* Byte 2 Bits 2-3 */ | |
480 | bool JP1:1; /* Byte 2 Bit 4 */ | |
481 | bool JP2:1; /* Byte 2 Bit 5 */ | |
482 | bool JP3:1; /* Byte 2 Bit 6 */ | |
483 | bool genericinfo_valid:1; /* Byte 2 Bit 7 */ | |
484 | unsigned char:8; /* Byte 3 */ | |
1da177e4 LT |
485 | }; |
486 | ||
487 | /* | |
488 | Define the Inquire Extended Setup Information reply structure. | |
489 | */ | |
490 | ||
839cb99e KA |
491 | struct blogic_ext_setup { |
492 | unsigned char bus_type; /* Byte 0 */ | |
493 | unsigned char bios_addr; /* Byte 1 */ | |
494 | unsigned short sg_limit; /* Bytes 2-3 */ | |
495 | unsigned char mbox_count; /* Byte 4 */ | |
496 | u32 base_mbox_addr; /* Bytes 5-8 */ | |
1da177e4 LT |
497 | struct { |
498 | unsigned char:2; /* Byte 9 Bits 0-1 */ | |
839cb99e | 499 | bool fast_on_eisa:1; /* Byte 9 Bit 2 */ |
1da177e4 | 500 | unsigned char:3; /* Byte 9 Bits 3-5 */ |
839cb99e | 501 | bool level_int:1; /* Byte 9 Bit 6 */ |
1da177e4 | 502 | unsigned char:1; /* Byte 9 Bit 7 */ |
839cb99e KA |
503 | } misc; |
504 | unsigned char fw_rev[3]; /* Bytes 10-12 */ | |
505 | bool wide:1; /* Byte 13 Bit 0 */ | |
506 | bool differential:1; /* Byte 13 Bit 1 */ | |
507 | bool scam:1; /* Byte 13 Bit 2 */ | |
508 | bool ultra:1; /* Byte 13 Bit 3 */ | |
509 | bool smart_term:1; /* Byte 13 Bit 4 */ | |
510 | unsigned char:3; /* Byte 13 Bits 5-7 */ | |
1da177e4 LT |
511 | } PACKED; |
512 | ||
513 | /* | |
514 | Define the Enable Strict Round Robin Mode request type. | |
515 | */ | |
516 | ||
839cb99e KA |
517 | enum blogic_rr_req { |
518 | BLOGIC_AGGRESSIVE_RR = 0, | |
519 | BLOGIC_STRICT_RR_MODE = 1 | |
1da177e4 LT |
520 | } PACKED; |
521 | ||
522 | ||
523 | /* | |
524 | Define the Fetch Host Adapter Local RAM request type. | |
525 | */ | |
526 | ||
839cb99e KA |
527 | #define BLOGIC_BIOS_BASE 0 |
528 | #define BLOGIC_AUTOSCSI_BASE 64 | |
1da177e4 | 529 | |
839cb99e KA |
530 | struct blogic_fetch_localram { |
531 | unsigned char offset; /* Byte 0 */ | |
532 | unsigned char count; /* Byte 1 */ | |
1da177e4 LT |
533 | }; |
534 | ||
535 | /* | |
536 | Define the Host Adapter Local RAM AutoSCSI structure. | |
537 | */ | |
538 | ||
839cb99e KA |
539 | struct blogic_autoscsi { |
540 | unsigned char factory_sig[2]; /* Bytes 0-1 */ | |
541 | unsigned char info_bytes; /* Byte 2 */ | |
542 | unsigned char adapter_type[6]; /* Bytes 3-8 */ | |
543 | unsigned char:8; /* Byte 9 */ | |
544 | bool floppy:1; /* Byte 10 Bit 0 */ | |
545 | bool floppy_sec:1; /* Byte 10 Bit 1 */ | |
546 | bool level_int:1; /* Byte 10 Bit 2 */ | |
547 | unsigned char:2; /* Byte 10 Bits 3-4 */ | |
548 | unsigned char systemram_bios:3; /* Byte 10 Bits 5-7 */ | |
549 | unsigned char dma_ch:7; /* Byte 11 Bits 0-6 */ | |
550 | bool dma_autoconf:1; /* Byte 11 Bit 7 */ | |
551 | unsigned char irq_ch:7; /* Byte 12 Bits 0-6 */ | |
552 | bool irq_autoconf:1; /* Byte 12 Bit 7 */ | |
553 | unsigned char dma_tx_rate; /* Byte 13 */ | |
554 | unsigned char scsi_id; /* Byte 14 */ | |
555 | bool low_term:1; /* Byte 15 Bit 0 */ | |
556 | bool parity:1; /* Byte 15 Bit 1 */ | |
557 | bool high_term:1; /* Byte 15 Bit 2 */ | |
558 | bool noisy_cable:1; /* Byte 15 Bit 3 */ | |
559 | bool fast_sync_neg:1; /* Byte 15 Bit 4 */ | |
560 | bool reset_enabled:1; /* Byte 15 Bit 5 */ | |
561 | bool:1; /* Byte 15 Bit 6 */ | |
562 | bool active_negation:1; /* Byte 15 Bit 7 */ | |
563 | unsigned char bus_on_delay; /* Byte 16 */ | |
564 | unsigned char bus_off_delay; /* Byte 17 */ | |
565 | bool bios_enabled:1; /* Byte 18 Bit 0 */ | |
566 | bool int19_redir_enabled:1; /* Byte 18 Bit 1 */ | |
567 | bool ext_trans_enable:1; /* Byte 18 Bit 2 */ | |
568 | bool removable_as_fixed:1; /* Byte 18 Bit 3 */ | |
569 | bool:1; /* Byte 18 Bit 4 */ | |
570 | bool morethan2_drives:1; /* Byte 18 Bit 5 */ | |
571 | bool bios_int:1; /* Byte 18 Bit 6 */ | |
572 | bool floptical:1; /* Byte 19 Bit 7 */ | |
573 | unsigned short dev_enabled; /* Bytes 19-20 */ | |
574 | unsigned short wide_ok; /* Bytes 21-22 */ | |
575 | unsigned short fast_ok; /* Bytes 23-24 */ | |
576 | unsigned short sync_ok; /* Bytes 25-26 */ | |
577 | unsigned short discon_ok; /* Bytes 27-28 */ | |
578 | unsigned short send_start_unit; /* Bytes 29-30 */ | |
579 | unsigned short ignore_bios_scan; /* Bytes 31-32 */ | |
580 | unsigned char pci_int_pin:2; /* Byte 33 Bits 0-1 */ | |
581 | unsigned char adapter_ioport:2; /* Byte 33 Bits 2-3 */ | |
582 | bool strict_rr_enabled:1; /* Byte 33 Bit 4 */ | |
583 | bool vesabus_33mhzplus:1; /* Byte 33 Bit 5 */ | |
584 | bool vesa_burst_write:1; /* Byte 33 Bit 6 */ | |
585 | bool vesa_burst_read:1; /* Byte 33 Bit 7 */ | |
586 | unsigned short ultra_ok; /* Bytes 34-35 */ | |
587 | unsigned int:32; /* Bytes 36-39 */ | |
588 | unsigned char:8; /* Byte 40 */ | |
589 | unsigned char autoscsi_maxlun; /* Byte 41 */ | |
590 | bool:1; /* Byte 42 Bit 0 */ | |
591 | bool scam_dominant:1; /* Byte 42 Bit 1 */ | |
592 | bool scam_enabled:1; /* Byte 42 Bit 2 */ | |
593 | bool scam_lev2:1; /* Byte 42 Bit 3 */ | |
594 | unsigned char:4; /* Byte 42 Bits 4-7 */ | |
595 | bool int13_exten:1; /* Byte 43 Bit 0 */ | |
596 | bool:1; /* Byte 43 Bit 1 */ | |
597 | bool cd_boot:1; /* Byte 43 Bit 2 */ | |
598 | unsigned char:5; /* Byte 43 Bits 3-7 */ | |
599 | unsigned char boot_id:4; /* Byte 44 Bits 0-3 */ | |
600 | unsigned char boot_ch:4; /* Byte 44 Bits 4-7 */ | |
601 | unsigned char force_scan_order:1; /* Byte 45 Bit 0 */ | |
602 | unsigned char:7; /* Byte 45 Bits 1-7 */ | |
603 | unsigned short nontagged_to_alt_ok; /* Bytes 46-47 */ | |
604 | unsigned short reneg_sync_on_check; /* Bytes 48-49 */ | |
605 | unsigned char rsvd[10]; /* Bytes 50-59 */ | |
606 | unsigned char manuf_diag[2]; /* Bytes 60-61 */ | |
607 | unsigned short cksum; /* Bytes 62-63 */ | |
1da177e4 LT |
608 | } PACKED; |
609 | ||
610 | /* | |
611 | Define the Host Adapter Local RAM Auto SCSI Byte 45 structure. | |
612 | */ | |
613 | ||
839cb99e KA |
614 | struct blogic_autoscsi_byte45 { |
615 | unsigned char force_scan_order:1; /* Bit 0 */ | |
1da177e4 LT |
616 | unsigned char:7; /* Bits 1-7 */ |
617 | }; | |
618 | ||
619 | /* | |
620 | Define the Host Adapter Local RAM BIOS Drive Map Byte structure. | |
621 | */ | |
622 | ||
839cb99e | 623 | #define BLOGIC_BIOS_DRVMAP 17 |
1da177e4 | 624 | |
839cb99e KA |
625 | struct blogic_bios_drvmap { |
626 | unsigned char tgt_idbit3:1; /* Bit 0 */ | |
627 | unsigned char:2; /* Bits 1-2 */ | |
628 | enum blogic_bios_diskgeometry diskgeom:2; /* Bits 3-4 */ | |
629 | unsigned char tgt_id:3; /* Bits 5-7 */ | |
1da177e4 LT |
630 | }; |
631 | ||
632 | /* | |
633 | Define the Set CCB Format request type. Extended LUN Format CCBs are | |
634 | necessary to support more than 8 Logical Units per Target Device. | |
635 | */ | |
636 | ||
839cb99e KA |
637 | enum blogic_setccb_fmt { |
638 | BLOGIC_LEGACY_LUN_CCB = 0, | |
639 | BLOGIC_EXT_LUN_CCB = 1 | |
1da177e4 LT |
640 | } PACKED; |
641 | ||
642 | /* | |
643 | Define the Outgoing Mailbox Action Codes. | |
644 | */ | |
645 | ||
839cb99e KA |
646 | enum blogic_action { |
647 | BLOGIC_OUTBOX_FREE = 0x00, | |
648 | BLOGIC_MBOX_START = 0x01, | |
649 | BLOGIC_MBOX_ABORT = 0x02 | |
1da177e4 LT |
650 | } PACKED; |
651 | ||
652 | ||
653 | /* | |
654 | Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware | |
655 | only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so | |
656 | completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5. | |
657 | */ | |
658 | ||
839cb99e KA |
659 | enum blogic_cmplt_code { |
660 | BLOGIC_INBOX_FREE = 0x00, | |
661 | BLOGIC_CMD_COMPLETE_GOOD = 0x01, | |
662 | BLOGIC_CMD_ABORT_BY_HOST = 0x02, | |
663 | BLOGIC_CMD_NOTFOUND = 0x03, | |
664 | BLOGIC_CMD_COMPLETE_ERROR = 0x04, | |
665 | BLOGIC_INVALID_CCB = 0x05 | |
1da177e4 LT |
666 | } PACKED; |
667 | ||
668 | /* | |
669 | Define the Command Control Block (CCB) Opcodes. | |
670 | */ | |
671 | ||
839cb99e KA |
672 | enum blogic_ccb_opcode { |
673 | BLOGIC_INITIATOR_CCB = 0x00, | |
674 | BLOGIC_TGT_CCB = 0x01, | |
675 | BLOGIC_INITIATOR_CCB_SG = 0x02, | |
676 | BLOGIC_INITIATOR_CCBB_RESIDUAL = 0x03, | |
677 | BLOGIC_INITIATOR_CCB_SG_RESIDUAL = 0x04, | |
678 | BLOGIC_BDR = 0x81 | |
1da177e4 LT |
679 | } PACKED; |
680 | ||
681 | ||
682 | /* | |
683 | Define the CCB Data Direction Codes. | |
684 | */ | |
685 | ||
839cb99e KA |
686 | enum blogic_datadir { |
687 | BLOGIC_UNCHECKED_TX = 0, | |
688 | BLOGIC_DATAIN_CHECKED = 1, | |
689 | BLOGIC_DATAOUT_CHECKED = 2, | |
690 | BLOGIC_NOTX = 3 | |
1da177e4 LT |
691 | }; |
692 | ||
693 | ||
694 | /* | |
695 | Define the Host Adapter Status Codes. The MultiMaster Firmware does not | |
696 | return status code 0x0C; it uses 0x12 for both overruns and underruns. | |
697 | */ | |
698 | ||
839cb99e KA |
699 | enum blogic_adapter_status { |
700 | BLOGIC_CMD_CMPLT_NORMAL = 0x00, | |
701 | BLOGIC_LINK_CMD_CMPLT = 0x0A, | |
702 | BLOGIC_LINK_CMD_CMPLT_FLAG = 0x0B, | |
703 | BLOGIC_DATA_UNDERRUN = 0x0C, | |
704 | BLOGIC_SELECT_TIMEOUT = 0x11, | |
705 | BLOGIC_DATA_OVERRUN = 0x12, | |
706 | BLOGIC_NOEXPECT_BUSFREE = 0x13, | |
707 | BLOGIC_INVALID_BUSPHASE = 0x14, | |
708 | BLOGIC_INVALID_OUTBOX_CODE = 0x15, | |
709 | BLOGIC_INVALID_CMD_CODE = 0x16, | |
710 | BLOGIC_LINKCCB_BADLUN = 0x17, | |
711 | BLOGIC_BAD_CMD_PARAM = 0x1A, | |
712 | BLOGIC_AUTOREQSENSE_FAIL = 0x1B, | |
713 | BLOGIC_TAGQUEUE_REJECT = 0x1C, | |
714 | BLOGIC_BAD_MSG_RCVD = 0x1D, | |
715 | BLOGIC_HW_FAIL = 0x20, | |
716 | BLOGIC_NORESPONSE_TO_ATN = 0x21, | |
717 | BLOGIC_HW_RESET = 0x22, | |
718 | BLOGIC_RST_FROM_OTHERDEV = 0x23, | |
719 | BLOGIC_BAD_RECONNECT = 0x24, | |
720 | BLOGIC_HW_BDR = 0x25, | |
721 | BLOGIC_ABRT_QUEUE = 0x26, | |
722 | BLOGIC_ADAPTER_SW_ERROR = 0x27, | |
723 | BLOGIC_HW_TIMEOUT = 0x30, | |
724 | BLOGIC_PARITY_ERR = 0x34 | |
1da177e4 LT |
725 | } PACKED; |
726 | ||
727 | ||
728 | /* | |
729 | Define the SCSI Target Device Status Codes. | |
730 | */ | |
731 | ||
839cb99e KA |
732 | enum blogic_tgt_status { |
733 | BLOGIC_OP_GOOD = 0x00, | |
734 | BLOGIC_CHECKCONDITION = 0x02, | |
735 | BLOGIC_DEVBUSY = 0x08 | |
1da177e4 LT |
736 | } PACKED; |
737 | ||
738 | /* | |
739 | Define the Queue Tag Codes. | |
740 | */ | |
741 | ||
839cb99e KA |
742 | enum blogic_queuetag { |
743 | BLOGIC_SIMPLETAG = 0, | |
744 | BLOGIC_HEADTAG = 1, | |
745 | BLOGIC_ORDEREDTAG = 2, | |
746 | BLOGIC_RSVDTAG = 3 | |
1da177e4 LT |
747 | }; |
748 | ||
749 | /* | |
750 | Define the SCSI Command Descriptor Block (CDB). | |
751 | */ | |
752 | ||
839cb99e | 753 | #define BLOGIC_CDB_MAXLEN 12 |
1da177e4 LT |
754 | |
755 | ||
756 | /* | |
757 | Define the Scatter/Gather Segment structure required by the MultiMaster | |
758 | Firmware Interface and the FlashPoint SCCB Manager. | |
759 | */ | |
760 | ||
839cb99e KA |
761 | struct blogic_sg_seg { |
762 | u32 segbytes; /* Bytes 0-3 */ | |
763 | u32 segdata; /* Bytes 4-7 */ | |
1da177e4 LT |
764 | }; |
765 | ||
766 | /* | |
767 | Define the Driver CCB Status Codes. | |
768 | */ | |
769 | ||
839cb99e KA |
770 | enum blogic_ccb_status { |
771 | BLOGIC_CCB_FREE = 0, | |
772 | BLOGIC_CCB_ACTIVE = 1, | |
773 | BLOGIC_CCB_COMPLETE = 2, | |
774 | BLOGIC_CCB_RESET = 3 | |
1da177e4 LT |
775 | } PACKED; |
776 | ||
777 | ||
778 | /* | |
779 | Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40 | |
780 | bytes are defined by and common to both the MultiMaster Firmware and the | |
781 | FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint | |
782 | SCCB Manager. The remaining components are defined by the Linux BusLogic | |
783 | Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode | |
784 | CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to | |
785 | byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory, | |
786 | Extended LUN Format CCBs can support up to 64 Logical Units, but in practice | |
787 | many devices will respond improperly to Logical Units between 32 and 63, and | |
788 | the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs | |
789 | are used by recent versions of the MultiMaster Firmware, as well as by the | |
790 | FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical | |
791 | Units. Since 64 Logical Units are unlikely to be needed in practice, and | |
792 | since they are problematic for the above reasons, and since limiting them to | |
793 | 5 bits simplifies the CCB structure definition, this driver only supports | |
794 | 32 Logical Units per Target Device. | |
795 | */ | |
796 | ||
839cb99e | 797 | struct blogic_ccb { |
1da177e4 LT |
798 | /* |
799 | MultiMaster Firmware and FlashPoint SCCB Manager Common Portion. | |
800 | */ | |
839cb99e KA |
801 | enum blogic_ccb_opcode opcode; /* Byte 0 */ |
802 | unsigned char:3; /* Byte 1 Bits 0-2 */ | |
803 | enum blogic_datadir datadir:2; /* Byte 1 Bits 3-4 */ | |
804 | bool tag_enable:1; /* Byte 1 Bit 5 */ | |
805 | enum blogic_queuetag queuetag:2; /* Byte 1 Bits 6-7 */ | |
806 | unsigned char cdblen; /* Byte 2 */ | |
807 | unsigned char sense_datalen; /* Byte 3 */ | |
808 | u32 datalen; /* Bytes 4-7 */ | |
56f39614 | 809 | u32 data; /* Bytes 8-11 */ |
839cb99e KA |
810 | unsigned char:8; /* Byte 12 */ |
811 | unsigned char:8; /* Byte 13 */ | |
812 | enum blogic_adapter_status adapter_status; /* Byte 14 */ | |
813 | enum blogic_tgt_status tgt_status; /* Byte 15 */ | |
814 | unsigned char tgt_id; /* Byte 16 */ | |
815 | unsigned char lun:5; /* Byte 17 Bits 0-4 */ | |
816 | bool legacytag_enable:1; /* Byte 17 Bit 5 */ | |
817 | enum blogic_queuetag legacy_tag:2; /* Byte 17 Bits 6-7 */ | |
818 | unsigned char cdb[BLOGIC_CDB_MAXLEN]; /* Bytes 18-29 */ | |
819 | unsigned char:8; /* Byte 30 */ | |
820 | unsigned char:8; /* Byte 31 */ | |
391e2f25 | 821 | u32 rsvd_int; /* Bytes 32-35 */ |
839cb99e | 822 | u32 sensedata; /* Bytes 36-39 */ |
1da177e4 LT |
823 | /* |
824 | FlashPoint SCCB Manager Defined Portion. | |
825 | */ | |
839cb99e KA |
826 | void (*callback) (struct blogic_ccb *); /* Bytes 40-43 */ |
827 | u32 base_addr; /* Bytes 44-47 */ | |
828 | enum blogic_cmplt_code comp_code; /* Byte 48 */ | |
78b4b05d | 829 | #ifdef CONFIG_SCSI_FLASHPOINT |
839cb99e | 830 | unsigned char:8; /* Byte 49 */ |
391e2f25 KA |
831 | u16 os_flags; /* Bytes 50-51 */ |
832 | unsigned char private[24]; /* Bytes 52-99 */ | |
833 | void *rsvd1; | |
834 | void *rsvd2; | |
835 | unsigned char private2[16]; | |
1da177e4 LT |
836 | #endif |
837 | /* | |
838 | BusLogic Linux Driver Defined Portion. | |
839 | */ | |
839cb99e KA |
840 | dma_addr_t allocgrp_head; |
841 | unsigned int allocgrp_size; | |
842 | u32 dma_handle; | |
843 | enum blogic_ccb_status status; | |
844 | unsigned long serial; | |
845 | struct scsi_cmnd *command; | |
846 | struct blogic_adapter *adapter; | |
847 | struct blogic_ccb *next; | |
848 | struct blogic_ccb *next_all; | |
849 | struct blogic_sg_seg sglist[BLOGIC_SG_LIMIT]; | |
1da177e4 LT |
850 | }; |
851 | ||
852 | /* | |
853 | Define the 32 Bit Mode Outgoing Mailbox structure. | |
854 | */ | |
855 | ||
839cb99e KA |
856 | struct blogic_outbox { |
857 | u32 ccb; /* Bytes 0-3 */ | |
391e2f25 | 858 | u32:24; /* Bytes 4-6 */ |
839cb99e | 859 | enum blogic_action action; /* Byte 7 */ |
1da177e4 LT |
860 | }; |
861 | ||
862 | /* | |
863 | Define the 32 Bit Mode Incoming Mailbox structure. | |
864 | */ | |
865 | ||
839cb99e | 866 | struct blogic_inbox { |
391e2f25 | 867 | u32 ccb; /* Bytes 0-3 */ |
839cb99e | 868 | enum blogic_adapter_status adapter_status; /* Byte 4 */ |
391e2f25 KA |
869 | enum blogic_tgt_status tgt_status; /* Byte 5 */ |
870 | unsigned char:8; /* Byte 6 */ | |
871 | enum blogic_cmplt_code comp_code; /* Byte 7 */ | |
1da177e4 LT |
872 | }; |
873 | ||
874 | ||
875 | /* | |
876 | Define the BusLogic Driver Options structure. | |
877 | */ | |
878 | ||
839cb99e KA |
879 | struct blogic_drvr_options { |
880 | unsigned short tagq_ok; | |
881 | unsigned short tagq_ok_mask; | |
882 | unsigned short bus_settle_time; | |
883 | unsigned short stop_tgt_inquiry; | |
884 | unsigned char common_qdepth; | |
885 | unsigned char qdepth[BLOGIC_MAXDEV]; | |
1da177e4 LT |
886 | }; |
887 | ||
888 | /* | |
889 | Define the Host Adapter Target Flags structure. | |
890 | */ | |
891 | ||
839cb99e KA |
892 | struct blogic_tgt_flags { |
893 | bool tgt_exists:1; | |
894 | bool tagq_ok:1; | |
895 | bool wide_ok:1; | |
896 | bool tagq_active:1; | |
897 | bool wide_active:1; | |
898 | bool cmd_good:1; | |
899 | bool tgt_info_in:1; | |
1da177e4 LT |
900 | }; |
901 | ||
902 | /* | |
903 | Define the Host Adapter Target Statistics structure. | |
904 | */ | |
905 | ||
839cb99e KA |
906 | #define BLOGIC_SZ_BUCKETS 10 |
907 | ||
908 | struct blogic_tgt_stats { | |
909 | unsigned int cmds_tried; | |
910 | unsigned int cmds_complete; | |
911 | unsigned int read_cmds; | |
912 | unsigned int write_cmds; | |
913 | struct blogic_byte_count bytesread; | |
914 | struct blogic_byte_count byteswritten; | |
915 | unsigned int read_sz_buckets[BLOGIC_SZ_BUCKETS]; | |
916 | unsigned int write_sz_buckets[BLOGIC_SZ_BUCKETS]; | |
917 | unsigned short aborts_request; | |
918 | unsigned short aborts_tried; | |
919 | unsigned short aborts_done; | |
920 | unsigned short bdr_request; | |
921 | unsigned short bdr_tried; | |
922 | unsigned short bdr_done; | |
20961065 | 923 | unsigned short adapter_reset_req; |
839cb99e KA |
924 | unsigned short adapter_reset_attempt; |
925 | unsigned short adapter_reset_done; | |
1da177e4 LT |
926 | }; |
927 | ||
928 | /* | |
929 | Define the FlashPoint Card Handle data type. | |
930 | */ | |
931 | ||
391e2f25 | 932 | #define FPOINT_BADCARD_HANDLE 0xFFFFFFFFL |
1da177e4 LT |
933 | |
934 | ||
935 | /* | |
936 | Define the FlashPoint Information structure. This structure is defined | |
937 | by the FlashPoint SCCB Manager. | |
938 | */ | |
939 | ||
839cb99e KA |
940 | struct fpoint_info { |
941 | u32 base_addr; /* Bytes 0-3 */ | |
942 | bool present; /* Byte 4 */ | |
943 | unsigned char irq_ch; /* Byte 5 */ | |
944 | unsigned char scsi_id; /* Byte 6 */ | |
945 | unsigned char scsi_lun; /* Byte 7 */ | |
391e2f25 KA |
946 | u16 fw_rev; /* Bytes 8-9 */ |
947 | u16 sync_ok; /* Bytes 10-11 */ | |
948 | u16 fast_ok; /* Bytes 12-13 */ | |
949 | u16 ultra_ok; /* Bytes 14-15 */ | |
950 | u16 discon_ok; /* Bytes 16-17 */ | |
951 | u16 wide_ok; /* Bytes 18-19 */ | |
839cb99e KA |
952 | bool parity:1; /* Byte 20 Bit 0 */ |
953 | bool wide:1; /* Byte 20 Bit 1 */ | |
954 | bool softreset:1; /* Byte 20 Bit 2 */ | |
955 | bool ext_trans_enable:1; /* Byte 20 Bit 3 */ | |
956 | bool low_term:1; /* Byte 20 Bit 4 */ | |
957 | bool high_term:1; /* Byte 20 Bit 5 */ | |
958 | bool report_underrun:1; /* Byte 20 Bit 6 */ | |
959 | bool scam_enabled:1; /* Byte 20 Bit 7 */ | |
960 | bool scam_lev2:1; /* Byte 21 Bit 0 */ | |
961 | unsigned char:7; /* Byte 21 Bits 1-7 */ | |
962 | unsigned char family; /* Byte 22 */ | |
963 | unsigned char bus_type; /* Byte 23 */ | |
964 | unsigned char model[3]; /* Bytes 24-26 */ | |
965 | unsigned char relative_cardnum; /* Byte 27 */ | |
966 | unsigned char rsvd[4]; /* Bytes 28-31 */ | |
391e2f25 | 967 | u32 os_rsvd; /* Bytes 32-35 */ |
839cb99e | 968 | unsigned char translation_info[4]; /* Bytes 36-39 */ |
391e2f25 KA |
969 | u32 rsvd2[5]; /* Bytes 40-59 */ |
970 | u32 sec_range; /* Bytes 60-63 */ | |
1da177e4 LT |
971 | }; |
972 | ||
973 | /* | |
974 | Define the BusLogic Driver Host Adapter structure. | |
975 | */ | |
976 | ||
839cb99e KA |
977 | struct blogic_adapter { |
978 | struct Scsi_Host *scsi_host; | |
979 | struct pci_dev *pci_device; | |
980 | enum blogic_adapter_type adapter_type; | |
981 | enum blogic_adapter_bus_type adapter_bus_type; | |
982 | unsigned long io_addr; | |
983 | unsigned long pci_addr; | |
984 | unsigned short addr_count; | |
985 | unsigned char host_no; | |
986 | unsigned char model[9]; | |
987 | unsigned char fw_ver[6]; | |
988 | unsigned char full_model[18]; | |
989 | unsigned char bus; | |
990 | unsigned char dev; | |
991 | unsigned char irq_ch; | |
839cb99e KA |
992 | unsigned char scsi_id; |
993 | bool irq_acquired:1; | |
839cb99e KA |
994 | bool ext_trans_enable:1; |
995 | bool parity:1; | |
996 | bool reset_enabled:1; | |
997 | bool level_int:1; | |
998 | bool wide:1; | |
999 | bool differential:1; | |
1000 | bool scam:1; | |
1001 | bool ultra:1; | |
1002 | bool ext_lun:1; | |
1003 | bool terminfo_valid:1; | |
1004 | bool low_term:1; | |
1005 | bool high_term:1; | |
839cb99e KA |
1006 | bool strict_rr:1; |
1007 | bool scam_enabled:1; | |
1008 | bool scam_lev2:1; | |
1009 | bool adapter_initd:1; | |
1010 | bool adapter_extreset:1; | |
1011 | bool adapter_intern_err:1; | |
1012 | bool processing_ccbs; | |
1013 | volatile bool adapter_cmd_complete; | |
1014 | unsigned short adapter_sglimit; | |
1015 | unsigned short drvr_sglimit; | |
1016 | unsigned short maxdev; | |
1017 | unsigned short maxlun; | |
1018 | unsigned short mbox_count; | |
1019 | unsigned short initccbs; | |
1020 | unsigned short inc_ccbs; | |
1021 | unsigned short alloc_ccbs; | |
1022 | unsigned short drvr_qdepth; | |
1023 | unsigned short adapter_qdepth; | |
1024 | unsigned short untag_qdepth; | |
1025 | unsigned short common_qdepth; | |
1026 | unsigned short bus_settle_time; | |
1027 | unsigned short sync_ok; | |
1028 | unsigned short fast_ok; | |
1029 | unsigned short ultra_ok; | |
1030 | unsigned short wide_ok; | |
1031 | unsigned short discon_ok; | |
1032 | unsigned short tagq_ok; | |
1033 | unsigned short ext_resets; | |
1034 | unsigned short adapter_intern_errors; | |
1035 | unsigned short tgt_count; | |
1036 | unsigned short msgbuflen; | |
1037 | u32 bios_addr; | |
1038 | struct blogic_drvr_options *drvr_opts; | |
1039 | struct fpoint_info fpinfo; | |
391e2f25 | 1040 | void *cardhandle; |
1da177e4 | 1041 | struct list_head host_list; |
839cb99e KA |
1042 | struct blogic_ccb *all_ccbs; |
1043 | struct blogic_ccb *free_ccbs; | |
1044 | struct blogic_ccb *firstccb; | |
1045 | struct blogic_ccb *lastccb; | |
1046 | struct blogic_ccb *bdr_pend[BLOGIC_MAXDEV]; | |
1047 | struct blogic_tgt_flags tgt_flags[BLOGIC_MAXDEV]; | |
1048 | unsigned char qdepth[BLOGIC_MAXDEV]; | |
1049 | unsigned char sync_period[BLOGIC_MAXDEV]; | |
1050 | unsigned char sync_offset[BLOGIC_MAXDEV]; | |
1051 | unsigned char active_cmds[BLOGIC_MAXDEV]; | |
1052 | unsigned int cmds_since_rst[BLOGIC_MAXDEV]; | |
1053 | unsigned long last_seqpoint[BLOGIC_MAXDEV]; | |
1054 | unsigned long last_resettried[BLOGIC_MAXDEV]; | |
1055 | unsigned long last_resetdone[BLOGIC_MAXDEV]; | |
1056 | struct blogic_outbox *first_outbox; | |
1057 | struct blogic_outbox *last_outbox; | |
1058 | struct blogic_outbox *next_outbox; | |
1059 | struct blogic_inbox *first_inbox; | |
1060 | struct blogic_inbox *last_inbox; | |
1061 | struct blogic_inbox *next_inbox; | |
1062 | struct blogic_tgt_stats tgt_stats[BLOGIC_MAXDEV]; | |
1063 | unsigned char *mbox_space; | |
1064 | dma_addr_t mbox_space_handle; | |
1065 | unsigned int mbox_sz; | |
1066 | unsigned long ccb_offset; | |
1067 | char msgbuf[BLOGIC_MSGBUF_SIZE]; | |
1da177e4 LT |
1068 | }; |
1069 | ||
1070 | /* | |
1071 | Define a structure for the BIOS Disk Parameters. | |
1072 | */ | |
1073 | ||
839cb99e KA |
1074 | struct bios_diskparam { |
1075 | int heads; | |
1076 | int sectors; | |
1077 | int cylinders; | |
1da177e4 LT |
1078 | }; |
1079 | ||
1080 | /* | |
1081 | Define a structure for the SCSI Inquiry command results. | |
1082 | */ | |
1083 | ||
839cb99e KA |
1084 | struct scsi_inquiry { |
1085 | unsigned char devtype:5; /* Byte 0 Bits 0-4 */ | |
1086 | unsigned char dev_qual:3; /* Byte 0 Bits 5-7 */ | |
1087 | unsigned char dev_modifier:7; /* Byte 1 Bits 0-6 */ | |
1088 | bool rmb:1; /* Byte 1 Bit 7 */ | |
1089 | unsigned char ansi_ver:3; /* Byte 2 Bits 0-2 */ | |
1090 | unsigned char ecma_ver:3; /* Byte 2 Bits 3-5 */ | |
1091 | unsigned char iso_ver:2; /* Byte 2 Bits 6-7 */ | |
1092 | unsigned char resp_fmt:4; /* Byte 3 Bits 0-3 */ | |
1093 | unsigned char:2; /* Byte 3 Bits 4-5 */ | |
1094 | bool TrmIOP:1; /* Byte 3 Bit 6 */ | |
1095 | bool AENC:1; /* Byte 3 Bit 7 */ | |
1096 | unsigned char addl_len; /* Byte 4 */ | |
1097 | unsigned char:8; /* Byte 5 */ | |
1098 | unsigned char:8; /* Byte 6 */ | |
1099 | bool SftRe:1; /* Byte 7 Bit 0 */ | |
1100 | bool CmdQue:1; /* Byte 7 Bit 1 */ | |
1101 | bool:1; /* Byte 7 Bit 2 */ | |
1102 | bool linked:1; /* Byte 7 Bit 3 */ | |
1103 | bool sync:1; /* Byte 7 Bit 4 */ | |
1104 | bool WBus16:1; /* Byte 7 Bit 5 */ | |
1105 | bool WBus32:1; /* Byte 7 Bit 6 */ | |
1106 | bool RelAdr:1; /* Byte 7 Bit 7 */ | |
1107 | unsigned char vendor[8]; /* Bytes 8-15 */ | |
1108 | unsigned char product[16]; /* Bytes 16-31 */ | |
1109 | unsigned char product_rev[4]; /* Bytes 32-35 */ | |
1da177e4 LT |
1110 | }; |
1111 | ||
1112 | ||
1113 | /* | |
1114 | Define functions to provide an abstraction for reading and writing the | |
1115 | Host Adapter I/O Registers. | |
1116 | */ | |
1117 | ||
839cb99e | 1118 | static inline void blogic_busreset(struct blogic_adapter *adapter) |
1da177e4 | 1119 | { |
839cb99e KA |
1120 | union blogic_cntrl_reg cr; |
1121 | cr.all = 0; | |
1122 | cr.cr.bus_reset = true; | |
1123 | outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG); | |
1da177e4 LT |
1124 | } |
1125 | ||
839cb99e | 1126 | static inline void blogic_intreset(struct blogic_adapter *adapter) |
1da177e4 | 1127 | { |
839cb99e KA |
1128 | union blogic_cntrl_reg cr; |
1129 | cr.all = 0; | |
1130 | cr.cr.int_reset = true; | |
1131 | outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG); | |
1da177e4 LT |
1132 | } |
1133 | ||
839cb99e | 1134 | static inline void blogic_softreset(struct blogic_adapter *adapter) |
1da177e4 | 1135 | { |
839cb99e KA |
1136 | union blogic_cntrl_reg cr; |
1137 | cr.all = 0; | |
1138 | cr.cr.soft_reset = true; | |
1139 | outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG); | |
1da177e4 LT |
1140 | } |
1141 | ||
839cb99e | 1142 | static inline void blogic_hardreset(struct blogic_adapter *adapter) |
1da177e4 | 1143 | { |
839cb99e KA |
1144 | union blogic_cntrl_reg cr; |
1145 | cr.all = 0; | |
1146 | cr.cr.hard_reset = true; | |
1147 | outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG); | |
1da177e4 LT |
1148 | } |
1149 | ||
839cb99e | 1150 | static inline unsigned char blogic_rdstatus(struct blogic_adapter *adapter) |
1da177e4 | 1151 | { |
839cb99e | 1152 | return inb(adapter->io_addr + BLOGIC_STATUS_REG); |
1da177e4 LT |
1153 | } |
1154 | ||
839cb99e KA |
1155 | static inline void blogic_setcmdparam(struct blogic_adapter *adapter, |
1156 | unsigned char value) | |
1da177e4 | 1157 | { |
839cb99e | 1158 | outb(value, adapter->io_addr + BLOGIC_CMD_PARM_REG); |
1da177e4 LT |
1159 | } |
1160 | ||
839cb99e | 1161 | static inline unsigned char blogic_rddatain(struct blogic_adapter *adapter) |
1da177e4 | 1162 | { |
839cb99e | 1163 | return inb(adapter->io_addr + BLOGIC_DATAIN_REG); |
1da177e4 LT |
1164 | } |
1165 | ||
839cb99e | 1166 | static inline unsigned char blogic_rdint(struct blogic_adapter *adapter) |
1da177e4 | 1167 | { |
839cb99e | 1168 | return inb(adapter->io_addr + BLOGIC_INT_REG); |
1da177e4 LT |
1169 | } |
1170 | ||
839cb99e | 1171 | static inline unsigned char blogic_rdgeom(struct blogic_adapter *adapter) |
1da177e4 | 1172 | { |
839cb99e | 1173 | return inb(adapter->io_addr + BLOGIC_GEOMETRY_REG); |
1da177e4 LT |
1174 | } |
1175 | ||
1176 | /* | |
839cb99e | 1177 | blogic_execmbox issues an Execute Mailbox Command, which |
1da177e4 LT |
1178 | notifies the Host Adapter that an entry has been made in an Outgoing |
1179 | Mailbox. | |
1180 | */ | |
1181 | ||
839cb99e | 1182 | static inline void blogic_execmbox(struct blogic_adapter *adapter) |
1da177e4 | 1183 | { |
839cb99e | 1184 | blogic_setcmdparam(adapter, BLOGIC_EXEC_MBOX_CMD); |
1da177e4 LT |
1185 | } |
1186 | ||
1187 | /* | |
839cb99e | 1188 | blogic_delay waits for Seconds to elapse. |
1da177e4 LT |
1189 | */ |
1190 | ||
839cb99e | 1191 | static inline void blogic_delay(int seconds) |
1da177e4 | 1192 | { |
839cb99e | 1193 | mdelay(1000 * seconds); |
1da177e4 LT |
1194 | } |
1195 | ||
1196 | /* | |
839cb99e | 1197 | virt_to_32bit_virt maps between Kernel Virtual Addresses and |
1da177e4 LT |
1198 | 32 bit Kernel Virtual Addresses. This avoids compilation warnings |
1199 | on 64 bit architectures. | |
1200 | */ | |
1201 | ||
839cb99e | 1202 | static inline u32 virt_to_32bit_virt(void *virt_addr) |
1da177e4 | 1203 | { |
839cb99e | 1204 | return (u32) (unsigned long) virt_addr; |
1da177e4 LT |
1205 | } |
1206 | ||
1207 | /* | |
839cb99e | 1208 | blogic_inc_count increments counter by 1, stopping at |
1da177e4 LT |
1209 | 65535 rather than wrapping around to 0. |
1210 | */ | |
1211 | ||
839cb99e | 1212 | static inline void blogic_inc_count(unsigned short *count) |
1da177e4 | 1213 | { |
839cb99e KA |
1214 | if (*count < 65535) |
1215 | (*count)++; | |
1da177e4 LT |
1216 | } |
1217 | ||
1218 | /* | |
839cb99e | 1219 | blogic_addcount increments Byte Counter by Amount. |
1da177e4 LT |
1220 | */ |
1221 | ||
839cb99e KA |
1222 | static inline void blogic_addcount(struct blogic_byte_count *bytecount, |
1223 | unsigned int amount) | |
1da177e4 | 1224 | { |
839cb99e KA |
1225 | bytecount->units += amount; |
1226 | if (bytecount->units > 999999999) { | |
1227 | bytecount->units -= 1000000000; | |
1228 | bytecount->billions++; | |
1da177e4 LT |
1229 | } |
1230 | } | |
1231 | ||
1232 | /* | |
839cb99e | 1233 | blogic_incszbucket increments the Bucket for Amount. |
1da177e4 LT |
1234 | */ |
1235 | ||
839cb99e KA |
1236 | static inline void blogic_incszbucket(unsigned int *cmdsz_buckets, |
1237 | unsigned int amount) | |
1da177e4 | 1238 | { |
839cb99e KA |
1239 | int index = 0; |
1240 | if (amount < 8 * 1024) { | |
1241 | if (amount < 2 * 1024) | |
1242 | index = (amount < 1 * 1024 ? 0 : 1); | |
1da177e4 | 1243 | else |
839cb99e KA |
1244 | index = (amount < 4 * 1024 ? 2 : 3); |
1245 | } else if (amount < 128 * 1024) { | |
1246 | if (amount < 32 * 1024) | |
1247 | index = (amount < 16 * 1024 ? 4 : 5); | |
1da177e4 | 1248 | else |
839cb99e | 1249 | index = (amount < 64 * 1024 ? 6 : 7); |
1da177e4 | 1250 | } else |
839cb99e KA |
1251 | index = (amount < 256 * 1024 ? 8 : 9); |
1252 | cmdsz_buckets[index]++; | |
1da177e4 LT |
1253 | } |
1254 | ||
1255 | /* | |
1256 | Define the version number of the FlashPoint Firmware (SCCB Manager). | |
1257 | */ | |
1258 | ||
839cb99e | 1259 | #define FLASHPOINT_FW_VER "5.02" |
1da177e4 LT |
1260 | |
1261 | /* | |
1262 | Define the possible return values from FlashPoint_HandleInterrupt. | |
1263 | */ | |
1264 | ||
839cb99e KA |
1265 | #define FPOINT_NORMAL_INT 0x00 |
1266 | #define FPOINT_INTERN_ERR 0xFE | |
1267 | #define FPOINT_EXT_RESET 0xFF | |
1da177e4 LT |
1268 | |
1269 | /* | |
1270 | Define prototypes for the forward referenced BusLogic Driver | |
1271 | Internal Functions. | |
1272 | */ | |
1273 | ||
839cb99e KA |
1274 | static const char *blogic_drvr_info(struct Scsi_Host *); |
1275 | static int blogic_qcmd(struct Scsi_Host *h, struct scsi_cmnd *); | |
1276 | static int blogic_diskparam(struct scsi_device *, struct block_device *, sector_t, int *); | |
1277 | static int blogic_slaveconfig(struct scsi_device *); | |
1278 | static void blogic_qcompleted_ccb(struct blogic_ccb *); | |
1279 | static irqreturn_t blogic_inthandler(int, void *); | |
1280 | static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset); | |
1281 | static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *, ...); | |
1282 | static int __init blogic_setup(char *); | |
1da177e4 LT |
1283 | |
1284 | #endif /* _BUSLOGIC_H */ |