[mirror_ubuntu-zesty-kernel.git] / drivers / scsi / NCR_D700.c

/* -*- mode: c; c-basic-offset: 8 -*- */

/* NCR Dual 700 MCA SCSI Driver
 *
 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
**-----------------------------------------------------------------------------
**  
**  This program is free software; you can redistribute it and/or modify
**  it under the terms of the GNU General Public License as published by
**  the Free Software Foundation; either version 2 of the License, or
**  (at your option) any later version.
**
**  This program is distributed in the hope that it will be useful,
**  but WITHOUT ANY WARRANTY; without even the implied warranty of
**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
**  GNU General Public License for more details.
**
**  You should have received a copy of the GNU General Public License
**  along with this program; if not, write to the Free Software
**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
**-----------------------------------------------------------------------------
 */

/* Notes:
 *
 * Most of the work is done in the chip specific module, 53c700.o
 *
 * TODO List:
 *
 * 1. Extract the SCSI ID from the voyager CMOS table (necessary to
 *    support multi-host environments.
 *
 * */


/* CHANGELOG 
 *
 * Version 2.2
 *
 * Added mca_set_adapter_name().
 *
 * Version 2.1
 *
 * Modularise the driver into a Board piece (this file) and a chip
 * piece 53c700.[ch] and 53c700.scr, added module options.  You can
 * now specify the scsi id by the parameters
 *
 * NCR_D700=slot:<n> [siop:<n>] id:<n> ....
 *
 * They need to be comma separated if compiled into the kernel
 *
 * Version 2.0
 *
 * Initial implementation of TCQ (Tag Command Queueing).  TCQ is full
 * featured and uses the clock algorithm to keep track of outstanding
 * tags and guard against individual tag starvation.  Also fixed a bug
 * in all of the 1.x versions where the D700_data_residue() function
 * was returning results off by 32 bytes (and thus causing the same 32
 * bytes to be written twice corrupting the data block).  It turns out
 * the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
 * like the 53c710 (The 710 is the only data manual still available,
 * which I'd been using to program the 700).
 *
 * Version 1.2
 *
 * Much improved message handling engine
 *
 * Version 1.1
 *
 * Add code to handle selection reasonably correctly.  By the time we
 * get the selection interrupt, we've already responded, but drop off the
 * bus and hope the selector will go away.
 *
 * Version 1.0:
 *
 *   Initial release.  Fully functional except for procfs and tag
 * command queueing.  Has only been tested on cards with 53c700-66
 * chips and only single ended. Features are
 *
 * 1. Synchronous data transfers to offset 8 (limit of 700-66) and
 *    100ns (10MHz) limit of SCSI-2
 *
 * 2. Disconnection and reselection
 *
 * Testing:
 * 
 *  I've only really tested this with the 700-66 chip, but have done
 * soak tests in multi-device environments to verify that
 * disconnections and reselections are being processed correctly.
 * */

#define NCR_D700_VERSION "2.2"

#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mca.h>
#include <asm/io.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>

#include "53c700.h"
#include "NCR_D700.h"

static char *NCR_D700;		/* command line from insmod */

MODULE_AUTHOR("James Bottomley");
MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
MODULE_LICENSE("GPL");
module_param(NCR_D700, charp, 0);

static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };

#ifdef MODULE
#define ARG_SEP ' '
#else
#define ARG_SEP ','
#endif

static int __init
param_setup(char *string)
{
	char *pos = string, *next;
	int slot = -1, siop = -1;

	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
		int val = (int)simple_strtoul(++next, NULL, 0);

		if(!strncmp(pos, "slot:", 5))
			slot = val;
		else if(!strncmp(pos, "siop:", 5))
			siop = val;
		else if(!strncmp(pos, "id:", 3)) {
			if(slot == -1) {
				printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
			} else if(slot > MCA_MAX_SLOT_NR) {
				printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
			} else {
				if(siop != 0 && siop != 1) {
					id_array[slot*2] = val;
					id_array[slot*2 + 1] =val;
				} else {
					id_array[slot*2 + siop] = val;
				}
			}
		}
		if((pos = strchr(pos, ARG_SEP)) != NULL)
			pos++;
	}
	return 1;
}

/* Host template.  The 53c700 routine NCR_700_detect will
 * fill in all of the missing routines */
static struct scsi_host_template NCR_D700_driver_template = {
	.module			= THIS_MODULE,
	.name			= "NCR Dual 700 MCA",
	.proc_name		= "NCR_D700",
	.this_id		= 7,
};

/* We needs this helper because we have two hosts per struct device */
struct NCR_D700_private {
	struct device		*dev;
	struct Scsi_Host	*hosts[2];
	char			name[30];
	char			pad;
};

static int __devinit
NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
		   int slot, u32 region, int differential)
{
	struct NCR_700_Host_Parameters *hostdata;
	struct Scsi_Host *host;
	int ret;

	hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
	if (!hostdata) {
		printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
		       "data, detatching\n", siop);
		return -ENOMEM;
	}

	if (!request_region(region, 64, "NCR_D700")) {
		printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
				region);
		ret = -ENODEV;
		goto region_failed;
	}
		
	/* Fill in the three required pieces of hostdata */
	hostdata->base = ioport_map(region, 64);
	hostdata->differential = (((1<<siop) & differential) != 0);
	hostdata->clock = NCR_D700_CLOCK_MHZ;
	hostdata->burst_length = 8;

	/* and register the siop */
	host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
	if (!host) {
		ret = -ENOMEM;
		goto detect_failed;
	}

	p->hosts[siop] = host;
	/* FIXME: read this from SUS */
	host->this_id = id_array[slot * 2 + siop];
	host->irq = irq;
	host->base = region;
	scsi_scan_host(host);

	return 0;

 detect_failed:
	release_region(region, 64);
 region_failed:
	kfree(hostdata);

	return ret;
}

static int
NCR_D700_intr(int irq, void *data)
{
	struct NCR_D700_private *p = (struct NCR_D700_private *)data;
	int i, found = 0;

	for (i = 0; i < 2; i++)
		if (p->hosts[i] &&
		    NCR_700_intr(irq, p->hosts[i]) == IRQ_HANDLED)
			found++;

	return found ? IRQ_HANDLED : IRQ_NONE;
}

/* Detect a D700 card.  Note, because of the setup --- the chips are
 * essentially connectecd to the MCA bus independently, it is easier
 * to set them up as two separate host adapters, rather than one
 * adapter with two channels */
static int __devinit
NCR_D700_probe(struct device *dev)
{
	struct NCR_D700_private *p;
	int differential;
	static int banner = 1;
	struct mca_device *mca_dev = to_mca_device(dev);
	int slot = mca_dev->slot;
	int found = 0;
	int irq, i;
	int pos3j, pos3k, pos3a, pos3b, pos4;
	__u32 base_addr, offset_addr;

	/* enable board interrupt */
	pos4 = mca_device_read_pos(mca_dev, 4);
	pos4 |= 0x4;
	mca_device_write_pos(mca_dev, 4, pos4);

	mca_device_write_pos(mca_dev, 6, 9);
	pos3j = mca_device_read_pos(mca_dev, 3);
	mca_device_write_pos(mca_dev, 6, 10);
	pos3k = mca_device_read_pos(mca_dev, 3);
	mca_device_write_pos(mca_dev, 6, 0);
	pos3a = mca_device_read_pos(mca_dev, 3);
	mca_device_write_pos(mca_dev, 6, 1);
	pos3b = mca_device_read_pos(mca_dev, 3);

	base_addr = ((pos3j << 8) | pos3k) & 0xfffffff0;
	offset_addr = ((pos3a << 8) | pos3b) & 0xffffff70;

	irq = (pos4 & 0x3) + 11;
	if(irq >= 13)
		irq++;
	if(banner) {
		printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
		       "NCR D700:  Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
		       "NCR D700:\n");
		banner = 0;
	}
	/* now do the bus related transforms */
	irq = mca_device_transform_irq(mca_dev, irq);
	base_addr = mca_device_transform_ioport(mca_dev, base_addr);
	offset_addr = mca_device_transform_ioport(mca_dev, offset_addr);

	printk(KERN_NOTICE "NCR D700: found in slot %d  irq = %d  I/O base = 0x%x\n", slot, irq, offset_addr);

	/*outb(BOARD_RESET, base_addr);*/

	/* clear any pending interrupts */
	(void)inb(base_addr + 0x08);
	/* get modctl, used later for setting diff bits */
	switch(differential = (inb(base_addr + 0x08) >> 6)) {
	case 0x00:
		/* only SIOP1 differential */
		differential = 0x02;
		break;
	case 0x01:
		/* Both SIOPs differential */
		differential = 0x03;
		break;
	case 0x03:
		/* No SIOPs differential */
		differential = 0x00;
		break;
	default:
		printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
		       differential);
		differential = 0x00;
		break;
	}

	p = kzalloc(sizeof(*p), GFP_KERNEL);
	if (!p)
		return -ENOMEM;

	p->dev = dev;
	snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
	if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
		printk(KERN_ERR "D700: request_irq failed\n");
		kfree(p);
		return -EBUSY;
	}
	/* plumb in both 700 chips */
	for (i = 0; i < 2; i++) {
		int err;

		if ((err = NCR_D700_probe_one(p, i, irq, slot,
					      offset_addr + (0x80 * i),
					      differential)) != 0)
			printk("D700: SIOP%d: probe failed, error = %d\n",
			       i, err);
		else
			found++;
	}

	if (!found) {
		kfree(p);
		return -ENODEV;
	}

	mca_device_set_claim(mca_dev, 1);
	mca_device_set_name(mca_dev, "NCR_D700");
	dev_set_drvdata(dev, p);
	return 0;
}

static void __devexit
NCR_D700_remove_one(struct Scsi_Host *host)
{
	scsi_remove_host(host);
	NCR_700_release(host);
	kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
	free_irq(host->irq, host);
	release_region(host->base, 64);
}

static int __devexit
NCR_D700_remove(struct device *dev)
{
	struct NCR_D700_private *p = dev_get_drvdata(dev);
	int i;

	for (i = 0; i < 2; i++)
		NCR_D700_remove_one(p->hosts[i]);

	kfree(p);
	return 0;
}

static short NCR_D700_id_table[] = { NCR_D700_MCA_ID, 0 };

static struct mca_driver NCR_D700_driver = {
	.id_table = NCR_D700_id_table,
	.driver = {
		.name		= "NCR_D700",
		.bus		= &mca_bus_type,
		.probe		= NCR_D700_probe,
		.remove		= __devexit_p(NCR_D700_remove),
	},
};

static int __init NCR_D700_init(void)
{
#ifdef MODULE
	if (NCR_D700)
		param_setup(NCR_D700);
#endif

	return mca_register_driver(&NCR_D700_driver);
}

static void __exit NCR_D700_exit(void)
{
	mca_unregister_driver(&NCR_D700_driver);
}

module_init(NCR_D700_init);
module_exit(NCR_D700_exit);

__setup("NCR_D700=", param_setup);
Commit	Line	Data
1da177e4 LT	1	/* -- mode: c; c-basic-offset: 8 -- */
	2
	3	/* NCR Dual 700 MCA SCSI Driver
	4	*
	5	* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
	6	**-----------------------------------------------------------------------------
	7	**
	8	** This program is free software; you can redistribute it and/or modify
	9	** it under the terms of the GNU General Public License as published by
	10	** the Free Software Foundation; either version 2 of the License, or
	11	** (at your option) any later version.
	12	**
	13	** This program is distributed in the hope that it will be useful,
	14	** but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	** GNU General Public License for more details.
	17	**
	18	** You should have received a copy of the GNU General Public License
	19	** along with this program; if not, write to the Free Software
	20	** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	**
	22	**-----------------------------------------------------------------------------
	23	*/
	24
	25	/* Notes:
	26	*
	27	* Most of the work is done in the chip specific module, 53c700.o
	28	*
	29	* TODO List:
	30	*
	31	* 1. Extract the SCSI ID from the voyager CMOS table (necessary to
	32	* support multi-host environments.
	33	*
	34	* */
	35
	36
	37	/* CHANGELOG
	38	*
	39	* Version 2.2
	40	*
	41	* Added mca_set_adapter_name().
	42	*
	43	* Version 2.1
	44	*
	45	* Modularise the driver into a Board piece (this file) and a chip
	46	* piece 53c700.[ch] and 53c700.scr, added module options. You can
	47	* now specify the scsi id by the parameters
	48	*
	49	* NCR_D700=slot:<n> [siop:<n>] id:<n> ....
	50	*
	51	* They need to be comma separated if compiled into the kernel
	52	*
	53	* Version 2.0
	54	*
	55	* Initial implementation of TCQ (Tag Command Queueing). TCQ is full
	56	* featured and uses the clock algorithm to keep track of outstanding
	57	* tags and guard against individual tag starvation. Also fixed a bug
	58	* in all of the 1.x versions where the D700_data_residue() function
	59	* was returning results off by 32 bytes (and thus causing the same 32
	60	* bytes to be written twice corrupting the data block). It turns out
	61	* the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
	62	* like the 53c710 (The 710 is the only data manual still available,
	63	* which I'd been using to program the 700).
	64	*
65	* Version 1.2
66	*
67	* Much improved message handling engine
68	*
69	* Version 1.1
70	*
71	* Add code to handle selection reasonably correctly. By the time we
72	* get the selection interrupt, we've already responded, but drop off the
73	* bus and hope the selector will go away.
74	*
75	* Version 1.0:
76	*
77	* Initial release. Fully functional except for procfs and tag
78	* command queueing. Has only been tested on cards with 53c700-66
79	* chips and only single ended. Features are
80	*
81	* 1. Synchronous data transfers to offset 8 (limit of 700-66) and
82	* 100ns (10MHz) limit of SCSI-2
83	*
84	* 2. Disconnection and reselection
85	*
86	* Testing:
87	*
88	* I've only really tested this with the 700-66 chip, but have done
89	* soak tests in multi-device environments to verify that
90	* disconnections and reselections are being processed correctly.
91	* */
92
93	#define NCR_D700_VERSION "2.2"
94
95	#include <linux/blkdev.h>
96	#include <linux/interrupt.h>
97	#include <linux/kernel.h>
98	#include <linux/module.h>
99	#include <linux/mca.h>
1da177e4 LT	100	#include <asm/io.h>
	101	#include <scsi/scsi_host.h>
	102	#include <scsi/scsi_device.h>
	103	#include <scsi/scsi_transport.h>
	104	#include <scsi/scsi_transport_spi.h>
	105
	106	#include "53c700.h"
	107	#include "NCR_D700.h"
	108
	109	static char NCR_D700; / command line from insmod */
	110
	111	MODULE_AUTHOR("James Bottomley");
	112	MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
	113	MODULE_LICENSE("GPL");
	114	module_param(NCR_D700, charp, 0);
	115
3bb056eb	116	static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
1da177e4 LT	117	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
	118
	119	#ifdef MODULE
	120	#define ARG_SEP ' '
	121	#else
	122	#define ARG_SEP ','
	123	#endif
	124
	125	static int __init
	126	param_setup(char *string)
	127	{
	128	char pos = string, next;
	129	int slot = -1, siop = -1;
	130
	131	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
	132	int val = (int)simple_strtoul(++next, NULL, 0);
	133
	134	if(!strncmp(pos, "slot:", 5))
	135	slot = val;
	136	else if(!strncmp(pos, "siop:", 5))
	137	siop = val;
	138	else if(!strncmp(pos, "id:", 3)) {
	139	if(slot == -1) {
	140	printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
	141	} else if(slot > MCA_MAX_SLOT_NR) {
	142	printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
	143	} else {
	144	if(siop != 0 && siop != 1) {
	145	id_array[slot*2] = val;
	146	id_array[slot*2 + 1] =val;
	147	} else {
	148	id_array[slot*2 + siop] = val;
	149	}
	150	}
	151	}
	152	if((pos = strchr(pos, ARG_SEP)) != NULL)
	153	pos++;
	154	}
	155	return 1;
	156	}
	157
	158	/* Host template. The 53c700 routine NCR_700_detect will
	159	* fill in all of the missing routines */
	160	static struct scsi_host_template NCR_D700_driver_template = {
	161	.module = THIS_MODULE,
	162	.name = "NCR Dual 700 MCA",
	163	.proc_name = "NCR_D700",
	164	.this_id = 7,
	165	};
	166
	167	/* We needs this helper because we have two hosts per struct device */
	168	struct NCR_D700_private {
	169	struct device *dev;
	170	struct Scsi_Host *hosts[2];
	171	char name[30];
	172	char pad;
	173	};
	174
3bb056eb	175	static int __devinit
1da177e4 LT	176	NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
	177	int slot, u32 region, int differential)
	178	{
	179	struct NCR_700_Host_Parameters *hostdata;
	180	struct Scsi_Host *host;
	181	int ret;
	182
dd00cc48	183	hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
1da177e4 LT	184	if (!hostdata) {
	185	printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
	186	"data, detatching\n", siop);
	187	return -ENOMEM;
	188	}
1da177e4 LT	189
	190	if (!request_region(region, 64, "NCR_D700")) {
	191	printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
	192	region);
	193	ret = -ENODEV;
	194	goto region_failed;
	195	}
	196
	197	/* Fill in the three required pieces of hostdata */
56fece20	198	hostdata->base = ioport_map(region, 64);
1da177e4 LT	199	hostdata->differential = (((1<<siop) & differential) != 0);
1da177e4 LT	200	hostdata->clock = NCR_D700_CLOCK_MHZ;
a5364c5a	201	hostdata->burst_length = 8;
1da177e4	202
1da177e4 LT	203	/* and register the siop */
	204	host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
	205	if (!host) {
	206	ret = -ENOMEM;
	207	goto detect_failed;
	208	}
	209
	210	p->hosts[siop] = host;
	211	/* FIXME: read this from SUS */
	212	host->this_id = id_array[slot * 2 + siop];
	213	host->irq = irq;
56fece20	214	host->base = region;
1da177e4 LT	215	scsi_scan_host(host);
	216
	217	return 0;
	218
	219	detect_failed:
8800727a	220	release_region(region, 64);
1da177e4 LT	221	region_failed:
	222	kfree(hostdata);
	223
	224	return ret;
	225	}
	226
	227	static int
7d12e780	228	NCR_D700_intr(int irq, void *data)
1da177e4 LT	229	{
	230	struct NCR_D700_private p = (struct NCR_D700_private )data;
	231	int i, found = 0;
	232
	233	for (i = 0; i < 2; i++)
	234	if (p->hosts[i] &&
7d12e780	235	NCR_700_intr(irq, p->hosts[i]) == IRQ_HANDLED)
1da177e4 LT	236	found++;
	237
	238	return found ? IRQ_HANDLED : IRQ_NONE;
	239	}
	240
	241	/* Detect a D700 card. Note, because of the setup --- the chips are
	242	* essentially connectecd to the MCA bus independently, it is easier
	243	* to set them up as two separate host adapters, rather than one
	244	* adapter with two channels */
3bb056eb	245	static int __devinit
1da177e4 LT	246	NCR_D700_probe(struct device *dev)
	247	{
	248	struct NCR_D700_private *p;
	249	int differential;
	250	static int banner = 1;
	251	struct mca_device *mca_dev = to_mca_device(dev);
	252	int slot = mca_dev->slot;
	253	int found = 0;
	254	int irq, i;
	255	int pos3j, pos3k, pos3a, pos3b, pos4;
	256	__u32 base_addr, offset_addr;
	257
	258	/* enable board interrupt */
	259	pos4 = mca_device_read_pos(mca_dev, 4);
	260	pos4 \|= 0x4;
	261	mca_device_write_pos(mca_dev, 4, pos4);
	262
	263	mca_device_write_pos(mca_dev, 6, 9);
	264	pos3j = mca_device_read_pos(mca_dev, 3);
	265	mca_device_write_pos(mca_dev, 6, 10);
	266	pos3k = mca_device_read_pos(mca_dev, 3);
	267	mca_device_write_pos(mca_dev, 6, 0);
	268	pos3a = mca_device_read_pos(mca_dev, 3);
	269	mca_device_write_pos(mca_dev, 6, 1);
	270	pos3b = mca_device_read_pos(mca_dev, 3);
	271
	272	base_addr = ((pos3j << 8) \| pos3k) & 0xfffffff0;
	273	offset_addr = ((pos3a << 8) \| pos3b) & 0xffffff70;
	274
	275	irq = (pos4 & 0x3) + 11;
	276	if(irq >= 13)
	277	irq++;
	278	if(banner) {
	279	printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
	280	"NCR D700: Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
	281	"NCR D700:\n");
	282	banner = 0;
	283	}
	284	/* now do the bus related transforms */
	285	irq = mca_device_transform_irq(mca_dev, irq);
	286	base_addr = mca_device_transform_ioport(mca_dev, base_addr);
	287	offset_addr = mca_device_transform_ioport(mca_dev, offset_addr);
	288
	289	printk(KERN_NOTICE "NCR D700: found in slot %d irq = %d I/O base = 0x%x\n", slot, irq, offset_addr);
	290
	291	/outb(BOARD_RESET, base_addr);/
	292
	293	/* clear any pending interrupts */
	294	(void)inb(base_addr + 0x08);
	295	/* get modctl, used later for setting diff bits */
	296	switch(differential = (inb(base_addr + 0x08) >> 6)) {
	297	case 0x00:
	298	/* only SIOP1 differential */
	299	differential = 0x02;
	300	break;
	301	case 0x01:
	302	/* Both SIOPs differential */
	303	differential = 0x03;
	304	break;
	305	case 0x03:
	306	/* No SIOPs differential */
	307	differential = 0x00;
	308	break;
	309	default:
310	printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
311	differential);
312	differential = 0x00;
313	break;
314	}
315
bbfbbbc1	316	p = kzalloc(sizeof(*p), GFP_KERNEL);
1da177e4 LT	317	if (!p)
1da177e4 LT	318	return -ENOMEM;
bbfbbbc1	319
1da177e4 LT	320	p->dev = dev;
1da177e4 LT	321	snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
1d6f359a	322	if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
1da177e4 LT	323	printk(KERN_ERR "D700: request_irq failed\n");
	324	kfree(p);
	325	return -EBUSY;
	326	}
	327	/* plumb in both 700 chips */
	328	for (i = 0; i < 2; i++) {
	329	int err;
	330
3bb056eb	331	if ((err = NCR_D700_probe_one(p, i, irq, slot,
1da177e4 LT	332	offset_addr + (0x80 * i),
	333	differential)) != 0)
	334	printk("D700: SIOP%d: probe failed, error = %d\n",
	335	i, err);
	336	else
	337	found++;
	338	}
	339
	340	if (!found) {
	341	kfree(p);
	342	return -ENODEV;
	343	}
	344
	345	mca_device_set_claim(mca_dev, 1);
	346	mca_device_set_name(mca_dev, "NCR_D700");
	347	dev_set_drvdata(dev, p);
	348	return 0;
	349	}
	350
3bb056eb	351	static void __devexit
1da177e4 LT	352	NCR_D700_remove_one(struct Scsi_Host *host)
	353	{
	354	scsi_remove_host(host);
	355	NCR_700_release(host);
	356	kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
	357	free_irq(host->irq, host);
	358	release_region(host->base, 64);
	359	}
	360
3bb056eb	361	static int __devexit
1da177e4 LT	362	NCR_D700_remove(struct device *dev)
	363	{
	364	struct NCR_D700_private *p = dev_get_drvdata(dev);
	365	int i;
	366
	367	for (i = 0; i < 2; i++)
	368	NCR_D700_remove_one(p->hosts[i]);
	369
	370	kfree(p);
	371	return 0;
	372	}
	373
	374	static short NCR_D700_id_table[] = { NCR_D700_MCA_ID, 0 };
	375
	376	static struct mca_driver NCR_D700_driver = {
	377	.id_table = NCR_D700_id_table,
	378	.driver = {
	379	.name = "NCR_D700",
	380	.bus = &mca_bus_type,
	381	.probe = NCR_D700_probe,
3bb056eb	382	.remove = __devexit_p(NCR_D700_remove),
1da177e4 LT	383	},
	384	};
	385
	386	static int __init NCR_D700_init(void)
	387	{
	388	#ifdef MODULE
	389	if (NCR_D700)
	390	param_setup(NCR_D700);
	391	#endif
	392
	393	return mca_register_driver(&NCR_D700_driver);
	394	}
	395
	396	static void __exit NCR_D700_exit(void)
	397	{
	398	mca_unregister_driver(&NCR_D700_driver);
	399	}
	400
	401	module_init(NCR_D700_init);
	402	module_exit(NCR_D700_exit);
	403
	404	__setup("NCR_D700=", param_setup);