]>
Commit | Line | Data |
---|---|---|
2874c5fd | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
1da177e4 LT |
2 | /* |
3 | * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters | |
4 | * | |
5 | * Copyright (c) 1995-2000 Advanced System Products, Inc. | |
6 | * Copyright (c) 2000-2001 ConnectCom Solutions, Inc. | |
8c6af9e1 | 7 | * Copyright (c) 2007 Matthew Wilcox <matthew@wil.cx> |
6571fb3f | 8 | * Copyright (c) 2014 Hannes Reinecke <hare@suse.de> |
1da177e4 | 9 | * All Rights Reserved. |
8c6af9e1 MW |
10 | */ |
11 | ||
12 | /* | |
1da177e4 LT |
13 | * As of March 8, 2000 Advanced System Products, Inc. (AdvanSys) |
14 | * changed its name to ConnectCom Solutions, Inc. | |
8c6af9e1 | 15 | * On June 18, 2001 Initio Corp. acquired ConnectCom's SCSI assets |
1da177e4 LT |
16 | */ |
17 | ||
1da177e4 | 18 | #include <linux/module.h> |
1da177e4 LT |
19 | #include <linux/string.h> |
20 | #include <linux/kernel.h> | |
21 | #include <linux/types.h> | |
22 | #include <linux/ioport.h> | |
23 | #include <linux/interrupt.h> | |
24 | #include <linux/delay.h> | |
25 | #include <linux/slab.h> | |
26 | #include <linux/mm.h> | |
27 | #include <linux/proc_fs.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/blkdev.h> | |
c304ec94 | 30 | #include <linux/isa.h> |
b09e05a7 | 31 | #include <linux/eisa.h> |
8c6af9e1 | 32 | #include <linux/pci.h> |
1da177e4 LT |
33 | #include <linux/spinlock.h> |
34 | #include <linux/dma-mapping.h> | |
989bb5f5 | 35 | #include <linux/firmware.h> |
8810eac8 | 36 | #include <linux/dmapool.h> |
1da177e4 LT |
37 | |
38 | #include <asm/io.h> | |
1da177e4 LT |
39 | #include <asm/dma.h> |
40 | ||
8c6af9e1 MW |
41 | #include <scsi/scsi_cmnd.h> |
42 | #include <scsi/scsi_device.h> | |
43 | #include <scsi/scsi_tcq.h> | |
44 | #include <scsi/scsi.h> | |
45 | #include <scsi/scsi_host.h> | |
46 | ||
6571fb3f HR |
47 | #define DRV_NAME "advansys" |
48 | #define ASC_VERSION "3.5" /* AdvanSys Driver Version */ | |
49 | ||
4bd6d7f3 | 50 | /* FIXME: |
1da177e4 | 51 | * |
6571fb3f HR |
52 | * 1. Use scsi_transport_spi |
53 | * 2. advansys_info is not safe against multiple simultaneous callers | |
54 | * 3. Add module_param to override ISA/VLB ioport array | |
1da177e4 | 55 | */ |
1da177e4 | 56 | |
1da177e4 LT |
57 | /* Enable driver /proc statistics. */ |
58 | #define ADVANSYS_STATS | |
59 | ||
60 | /* Enable driver tracing. */ | |
b352f923 | 61 | #undef ADVANSYS_DEBUG |
1da177e4 | 62 | |
1da177e4 LT |
63 | typedef unsigned char uchar; |
64 | ||
1da177e4 | 65 | #define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0) |
1da177e4 | 66 | |
2672ea86 DJ |
67 | #define PCI_VENDOR_ID_ASP 0x10cd |
68 | #define PCI_DEVICE_ID_ASP_1200A 0x1100 | |
69 | #define PCI_DEVICE_ID_ASP_ABP940 0x1200 | |
70 | #define PCI_DEVICE_ID_ASP_ABP940U 0x1300 | |
71 | #define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 | |
72 | #define PCI_DEVICE_ID_38C0800_REV1 0x2500 | |
73 | #define PCI_DEVICE_ID_38C1600_REV1 0x2700 | |
74 | ||
9d511a4b | 75 | #define PortAddr unsigned int /* port address size */ |
1da177e4 LT |
76 | #define inp(port) inb(port) |
77 | #define outp(port, byte) outb((byte), (port)) | |
78 | ||
79 | #define inpw(port) inw(port) | |
80 | #define outpw(port, word) outw((word), (port)) | |
81 | ||
82 | #define ASC_MAX_SG_QUEUE 7 | |
83 | #define ASC_MAX_SG_LIST 255 | |
84 | ||
85 | #define ASC_CS_TYPE unsigned short | |
86 | ||
87 | #define ASC_IS_ISA (0x0001) | |
88 | #define ASC_IS_ISAPNP (0x0081) | |
89 | #define ASC_IS_EISA (0x0002) | |
90 | #define ASC_IS_PCI (0x0004) | |
91 | #define ASC_IS_PCI_ULTRA (0x0104) | |
92 | #define ASC_IS_PCMCIA (0x0008) | |
93 | #define ASC_IS_MCA (0x0020) | |
94 | #define ASC_IS_VL (0x0040) | |
1da177e4 LT |
95 | #define ASC_IS_WIDESCSI_16 (0x0100) |
96 | #define ASC_IS_WIDESCSI_32 (0x0200) | |
97 | #define ASC_IS_BIG_ENDIAN (0x8000) | |
95c9f162 | 98 | |
1da177e4 LT |
99 | #define ASC_CHIP_MIN_VER_VL (0x01) |
100 | #define ASC_CHIP_MAX_VER_VL (0x07) | |
101 | #define ASC_CHIP_MIN_VER_PCI (0x09) | |
102 | #define ASC_CHIP_MAX_VER_PCI (0x0F) | |
103 | #define ASC_CHIP_VER_PCI_BIT (0x08) | |
104 | #define ASC_CHIP_MIN_VER_ISA (0x11) | |
105 | #define ASC_CHIP_MIN_VER_ISA_PNP (0x21) | |
106 | #define ASC_CHIP_MAX_VER_ISA (0x27) | |
107 | #define ASC_CHIP_VER_ISA_BIT (0x30) | |
108 | #define ASC_CHIP_VER_ISAPNP_BIT (0x20) | |
109 | #define ASC_CHIP_VER_ASYN_BUG (0x21) | |
110 | #define ASC_CHIP_VER_PCI 0x08 | |
111 | #define ASC_CHIP_VER_PCI_ULTRA_3150 (ASC_CHIP_VER_PCI | 0x02) | |
112 | #define ASC_CHIP_VER_PCI_ULTRA_3050 (ASC_CHIP_VER_PCI | 0x03) | |
113 | #define ASC_CHIP_MIN_VER_EISA (0x41) | |
114 | #define ASC_CHIP_MAX_VER_EISA (0x47) | |
115 | #define ASC_CHIP_VER_EISA_BIT (0x40) | |
116 | #define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3) | |
1da177e4 | 117 | #define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL) |
1da177e4 | 118 | #define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL) |
1da177e4 | 119 | #define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL) |
1da177e4 LT |
120 | |
121 | #define ASC_SCSI_ID_BITS 3 | |
122 | #define ASC_SCSI_TIX_TYPE uchar | |
123 | #define ASC_ALL_DEVICE_BIT_SET 0xFF | |
124 | #define ASC_SCSI_BIT_ID_TYPE uchar | |
125 | #define ASC_MAX_TID 7 | |
126 | #define ASC_MAX_LUN 7 | |
127 | #define ASC_SCSI_WIDTH_BIT_SET 0xFF | |
128 | #define ASC_MAX_SENSE_LEN 32 | |
129 | #define ASC_MIN_SENSE_LEN 14 | |
1da177e4 LT |
130 | #define ASC_SCSI_RESET_HOLD_TIME_US 60 |
131 | ||
f05ec594 MW |
132 | /* |
133 | * Narrow boards only support 12-byte commands, while wide boards | |
134 | * extend to 16-byte commands. | |
135 | */ | |
136 | #define ASC_MAX_CDB_LEN 12 | |
137 | #define ADV_MAX_CDB_LEN 16 | |
138 | ||
1da177e4 | 139 | #define MS_SDTR_LEN 0x03 |
1da177e4 | 140 | #define MS_WDTR_LEN 0x02 |
1da177e4 LT |
141 | |
142 | #define ASC_SG_LIST_PER_Q 7 | |
143 | #define QS_FREE 0x00 | |
144 | #define QS_READY 0x01 | |
145 | #define QS_DISC1 0x02 | |
146 | #define QS_DISC2 0x04 | |
147 | #define QS_BUSY 0x08 | |
148 | #define QS_ABORTED 0x40 | |
149 | #define QS_DONE 0x80 | |
150 | #define QC_NO_CALLBACK 0x01 | |
151 | #define QC_SG_SWAP_QUEUE 0x02 | |
152 | #define QC_SG_HEAD 0x04 | |
153 | #define QC_DATA_IN 0x08 | |
154 | #define QC_DATA_OUT 0x10 | |
155 | #define QC_URGENT 0x20 | |
156 | #define QC_MSG_OUT 0x40 | |
157 | #define QC_REQ_SENSE 0x80 | |
158 | #define QCSG_SG_XFER_LIST 0x02 | |
159 | #define QCSG_SG_XFER_MORE 0x04 | |
160 | #define QCSG_SG_XFER_END 0x08 | |
161 | #define QD_IN_PROGRESS 0x00 | |
162 | #define QD_NO_ERROR 0x01 | |
163 | #define QD_ABORTED_BY_HOST 0x02 | |
164 | #define QD_WITH_ERROR 0x04 | |
165 | #define QD_INVALID_REQUEST 0x80 | |
166 | #define QD_INVALID_HOST_NUM 0x81 | |
167 | #define QD_INVALID_DEVICE 0x82 | |
168 | #define QD_ERR_INTERNAL 0xFF | |
169 | #define QHSTA_NO_ERROR 0x00 | |
170 | #define QHSTA_M_SEL_TIMEOUT 0x11 | |
171 | #define QHSTA_M_DATA_OVER_RUN 0x12 | |
172 | #define QHSTA_M_DATA_UNDER_RUN 0x12 | |
173 | #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 | |
174 | #define QHSTA_M_BAD_BUS_PHASE_SEQ 0x14 | |
175 | #define QHSTA_D_QDONE_SG_LIST_CORRUPTED 0x21 | |
176 | #define QHSTA_D_ASC_DVC_ERROR_CODE_SET 0x22 | |
177 | #define QHSTA_D_HOST_ABORT_FAILED 0x23 | |
178 | #define QHSTA_D_EXE_SCSI_Q_FAILED 0x24 | |
179 | #define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT 0x25 | |
180 | #define QHSTA_D_ASPI_NO_BUF_POOL 0x26 | |
181 | #define QHSTA_M_WTM_TIMEOUT 0x41 | |
182 | #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 | |
183 | #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 | |
184 | #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 | |
185 | #define QHSTA_M_TARGET_STATUS_BUSY 0x45 | |
186 | #define QHSTA_M_BAD_TAG_CODE 0x46 | |
187 | #define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY 0x47 | |
188 | #define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET 0x48 | |
189 | #define QHSTA_D_LRAM_CMP_ERROR 0x81 | |
190 | #define QHSTA_M_MICRO_CODE_ERROR_HALT 0xA1 | |
191 | #define ASC_FLAG_SCSIQ_REQ 0x01 | |
192 | #define ASC_FLAG_BIOS_SCSIQ_REQ 0x02 | |
193 | #define ASC_FLAG_BIOS_ASYNC_IO 0x04 | |
194 | #define ASC_FLAG_SRB_LINEAR_ADDR 0x08 | |
195 | #define ASC_FLAG_WIN16 0x10 | |
196 | #define ASC_FLAG_WIN32 0x20 | |
197 | #define ASC_FLAG_ISA_OVER_16MB 0x40 | |
198 | #define ASC_FLAG_DOS_VM_CALLBACK 0x80 | |
199 | #define ASC_TAG_FLAG_EXTRA_BYTES 0x10 | |
200 | #define ASC_TAG_FLAG_DISABLE_DISCONNECT 0x04 | |
201 | #define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX 0x08 | |
202 | #define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST 0x40 | |
203 | #define ASC_SCSIQ_CPY_BEG 4 | |
204 | #define ASC_SCSIQ_SGHD_CPY_BEG 2 | |
205 | #define ASC_SCSIQ_B_FWD 0 | |
206 | #define ASC_SCSIQ_B_BWD 1 | |
207 | #define ASC_SCSIQ_B_STATUS 2 | |
208 | #define ASC_SCSIQ_B_QNO 3 | |
209 | #define ASC_SCSIQ_B_CNTL 4 | |
210 | #define ASC_SCSIQ_B_SG_QUEUE_CNT 5 | |
211 | #define ASC_SCSIQ_D_DATA_ADDR 8 | |
212 | #define ASC_SCSIQ_D_DATA_CNT 12 | |
213 | #define ASC_SCSIQ_B_SENSE_LEN 20 | |
214 | #define ASC_SCSIQ_DONE_INFO_BEG 22 | |
215 | #define ASC_SCSIQ_D_SRBPTR 22 | |
216 | #define ASC_SCSIQ_B_TARGET_IX 26 | |
217 | #define ASC_SCSIQ_B_CDB_LEN 28 | |
218 | #define ASC_SCSIQ_B_TAG_CODE 29 | |
219 | #define ASC_SCSIQ_W_VM_ID 30 | |
220 | #define ASC_SCSIQ_DONE_STATUS 32 | |
221 | #define ASC_SCSIQ_HOST_STATUS 33 | |
222 | #define ASC_SCSIQ_SCSI_STATUS 34 | |
223 | #define ASC_SCSIQ_CDB_BEG 36 | |
224 | #define ASC_SCSIQ_DW_REMAIN_XFER_ADDR 56 | |
225 | #define ASC_SCSIQ_DW_REMAIN_XFER_CNT 60 | |
226 | #define ASC_SCSIQ_B_FIRST_SG_WK_QP 48 | |
227 | #define ASC_SCSIQ_B_SG_WK_QP 49 | |
228 | #define ASC_SCSIQ_B_SG_WK_IX 50 | |
229 | #define ASC_SCSIQ_W_ALT_DC1 52 | |
230 | #define ASC_SCSIQ_B_LIST_CNT 6 | |
231 | #define ASC_SCSIQ_B_CUR_LIST_CNT 7 | |
232 | #define ASC_SGQ_B_SG_CNTL 4 | |
233 | #define ASC_SGQ_B_SG_HEAD_QP 5 | |
234 | #define ASC_SGQ_B_SG_LIST_CNT 6 | |
235 | #define ASC_SGQ_B_SG_CUR_LIST_CNT 7 | |
236 | #define ASC_SGQ_LIST_BEG 8 | |
237 | #define ASC_DEF_SCSI1_QNG 4 | |
238 | #define ASC_MAX_SCSI1_QNG 4 | |
239 | #define ASC_DEF_SCSI2_QNG 16 | |
240 | #define ASC_MAX_SCSI2_QNG 32 | |
241 | #define ASC_TAG_CODE_MASK 0x23 | |
242 | #define ASC_STOP_REQ_RISC_STOP 0x01 | |
243 | #define ASC_STOP_ACK_RISC_STOP 0x03 | |
244 | #define ASC_STOP_CLEAN_UP_BUSY_Q 0x10 | |
245 | #define ASC_STOP_CLEAN_UP_DISC_Q 0x20 | |
246 | #define ASC_STOP_HOST_REQ_RISC_HALT 0x40 | |
247 | #define ASC_TIDLUN_TO_IX(tid, lun) (ASC_SCSI_TIX_TYPE)((tid) + ((lun)<<ASC_SCSI_ID_BITS)) | |
248 | #define ASC_TID_TO_TARGET_ID(tid) (ASC_SCSI_BIT_ID_TYPE)(0x01 << (tid)) | |
249 | #define ASC_TIX_TO_TARGET_ID(tix) (0x01 << ((tix) & ASC_MAX_TID)) | |
250 | #define ASC_TIX_TO_TID(tix) ((tix) & ASC_MAX_TID) | |
251 | #define ASC_TID_TO_TIX(tid) ((tid) & ASC_MAX_TID) | |
252 | #define ASC_TIX_TO_LUN(tix) (((tix) >> ASC_SCSI_ID_BITS) & ASC_MAX_LUN) | |
253 | #define ASC_QNO_TO_QADDR(q_no) ((ASC_QADR_BEG)+((int)(q_no) << 6)) | |
254 | ||
255 | typedef struct asc_scsiq_1 { | |
27c868c2 MW |
256 | uchar status; |
257 | uchar q_no; | |
258 | uchar cntl; | |
259 | uchar sg_queue_cnt; | |
260 | uchar target_id; | |
261 | uchar target_lun; | |
95cfab6c HR |
262 | __le32 data_addr; |
263 | __le32 data_cnt; | |
264 | __le32 sense_addr; | |
27c868c2 MW |
265 | uchar sense_len; |
266 | uchar extra_bytes; | |
1da177e4 LT |
267 | } ASC_SCSIQ_1; |
268 | ||
269 | typedef struct asc_scsiq_2 { | |
9c17c62a | 270 | u32 srb_tag; |
27c868c2 MW |
271 | uchar target_ix; |
272 | uchar flag; | |
273 | uchar cdb_len; | |
274 | uchar tag_code; | |
275 | ushort vm_id; | |
1da177e4 LT |
276 | } ASC_SCSIQ_2; |
277 | ||
278 | typedef struct asc_scsiq_3 { | |
27c868c2 MW |
279 | uchar done_stat; |
280 | uchar host_stat; | |
281 | uchar scsi_stat; | |
282 | uchar scsi_msg; | |
1da177e4 LT |
283 | } ASC_SCSIQ_3; |
284 | ||
285 | typedef struct asc_scsiq_4 { | |
27c868c2 MW |
286 | uchar cdb[ASC_MAX_CDB_LEN]; |
287 | uchar y_first_sg_list_qp; | |
288 | uchar y_working_sg_qp; | |
289 | uchar y_working_sg_ix; | |
290 | uchar y_res; | |
291 | ushort x_req_count; | |
292 | ushort x_reconnect_rtn; | |
95cfab6c HR |
293 | __le32 x_saved_data_addr; |
294 | __le32 x_saved_data_cnt; | |
1da177e4 LT |
295 | } ASC_SCSIQ_4; |
296 | ||
297 | typedef struct asc_q_done_info { | |
27c868c2 MW |
298 | ASC_SCSIQ_2 d2; |
299 | ASC_SCSIQ_3 d3; | |
300 | uchar q_status; | |
301 | uchar q_no; | |
302 | uchar cntl; | |
303 | uchar sense_len; | |
304 | uchar extra_bytes; | |
305 | uchar res; | |
95cfab6c | 306 | u32 remain_bytes; |
1da177e4 LT |
307 | } ASC_QDONE_INFO; |
308 | ||
309 | typedef struct asc_sg_list { | |
95cfab6c HR |
310 | __le32 addr; |
311 | __le32 bytes; | |
1da177e4 LT |
312 | } ASC_SG_LIST; |
313 | ||
314 | typedef struct asc_sg_head { | |
27c868c2 MW |
315 | ushort entry_cnt; |
316 | ushort queue_cnt; | |
317 | ushort entry_to_copy; | |
318 | ushort res; | |
05848b6e | 319 | ASC_SG_LIST sg_list[0]; |
1da177e4 LT |
320 | } ASC_SG_HEAD; |
321 | ||
1da177e4 | 322 | typedef struct asc_scsi_q { |
27c868c2 MW |
323 | ASC_SCSIQ_1 q1; |
324 | ASC_SCSIQ_2 q2; | |
325 | uchar *cdbptr; | |
326 | ASC_SG_HEAD *sg_head; | |
327 | ushort remain_sg_entry_cnt; | |
328 | ushort next_sg_index; | |
1da177e4 LT |
329 | } ASC_SCSI_Q; |
330 | ||
1da177e4 | 331 | typedef struct asc_scsi_bios_req_q { |
27c868c2 MW |
332 | ASC_SCSIQ_1 r1; |
333 | ASC_SCSIQ_2 r2; | |
334 | uchar *cdbptr; | |
335 | ASC_SG_HEAD *sg_head; | |
336 | uchar *sense_ptr; | |
337 | ASC_SCSIQ_3 r3; | |
338 | uchar cdb[ASC_MAX_CDB_LEN]; | |
339 | uchar sense[ASC_MIN_SENSE_LEN]; | |
1da177e4 LT |
340 | } ASC_SCSI_BIOS_REQ_Q; |
341 | ||
342 | typedef struct asc_risc_q { | |
27c868c2 MW |
343 | uchar fwd; |
344 | uchar bwd; | |
345 | ASC_SCSIQ_1 i1; | |
346 | ASC_SCSIQ_2 i2; | |
347 | ASC_SCSIQ_3 i3; | |
348 | ASC_SCSIQ_4 i4; | |
1da177e4 LT |
349 | } ASC_RISC_Q; |
350 | ||
351 | typedef struct asc_sg_list_q { | |
27c868c2 MW |
352 | uchar seq_no; |
353 | uchar q_no; | |
354 | uchar cntl; | |
355 | uchar sg_head_qp; | |
356 | uchar sg_list_cnt; | |
357 | uchar sg_cur_list_cnt; | |
1da177e4 LT |
358 | } ASC_SG_LIST_Q; |
359 | ||
360 | typedef struct asc_risc_sg_list_q { | |
27c868c2 MW |
361 | uchar fwd; |
362 | uchar bwd; | |
363 | ASC_SG_LIST_Q sg; | |
364 | ASC_SG_LIST sg_list[7]; | |
1da177e4 LT |
365 | } ASC_RISC_SG_LIST_Q; |
366 | ||
1da177e4 | 367 | #define ASCQ_ERR_Q_STATUS 0x0D |
1da177e4 LT |
368 | #define ASCQ_ERR_CUR_QNG 0x17 |
369 | #define ASCQ_ERR_SG_Q_LINKS 0x18 | |
1da177e4 LT |
370 | #define ASCQ_ERR_ISR_RE_ENTRY 0x1A |
371 | #define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B | |
372 | #define ASCQ_ERR_ISR_ON_CRITICAL 0x1C | |
1da177e4 LT |
373 | |
374 | /* | |
375 | * Warning code values are set in ASC_DVC_VAR 'warn_code'. | |
376 | */ | |
377 | #define ASC_WARN_NO_ERROR 0x0000 | |
378 | #define ASC_WARN_IO_PORT_ROTATE 0x0001 | |
379 | #define ASC_WARN_EEPROM_CHKSUM 0x0002 | |
380 | #define ASC_WARN_IRQ_MODIFIED 0x0004 | |
381 | #define ASC_WARN_AUTO_CONFIG 0x0008 | |
382 | #define ASC_WARN_CMD_QNG_CONFLICT 0x0010 | |
383 | #define ASC_WARN_EEPROM_RECOVER 0x0020 | |
384 | #define ASC_WARN_CFG_MSW_RECOVER 0x0040 | |
1da177e4 LT |
385 | |
386 | /* | |
720349a8 | 387 | * Error code values are set in {ASC/ADV}_DVC_VAR 'err_code'. |
1da177e4 | 388 | */ |
720349a8 MW |
389 | #define ASC_IERR_NO_CARRIER 0x0001 /* No more carrier memory */ |
390 | #define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ | |
391 | #define ASC_IERR_SET_PC_ADDR 0x0004 | |
392 | #define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ | |
393 | #define ASC_IERR_ILLEGAL_CONNECTION 0x0010 /* Illegal cable connection */ | |
394 | #define ASC_IERR_SINGLE_END_DEVICE 0x0020 /* SE device on DIFF bus */ | |
395 | #define ASC_IERR_REVERSED_CABLE 0x0040 /* Narrow flat cable reversed */ | |
396 | #define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ | |
397 | #define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */ | |
398 | #define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ | |
399 | #define ASC_IERR_NO_BUS_TYPE 0x0400 | |
400 | #define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */ | |
401 | #define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */ | |
402 | #define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */ | |
1da177e4 | 403 | |
1da177e4 LT |
404 | #define ASC_DEF_MAX_TOTAL_QNG (0xF0) |
405 | #define ASC_MIN_TAG_Q_PER_DVC (0x04) | |
95c9f162 | 406 | #define ASC_MIN_FREE_Q (0x02) |
1da177e4 LT |
407 | #define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q)) |
408 | #define ASC_MAX_TOTAL_QNG 240 | |
409 | #define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16 | |
410 | #define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8 | |
411 | #define ASC_MAX_PCI_INRAM_TOTAL_QNG 20 | |
412 | #define ASC_MAX_INRAM_TAG_QNG 16 | |
1da177e4 | 413 | #define ASC_IOADR_GAP 0x10 |
1da177e4 LT |
414 | #define ASC_SYN_MAX_OFFSET 0x0F |
415 | #define ASC_DEF_SDTR_OFFSET 0x0F | |
1da177e4 | 416 | #define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02 |
afbb68c3 MW |
417 | #define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41 |
418 | ||
419 | /* The narrow chip only supports a limited selection of transfer rates. | |
420 | * These are encoded in the range 0..7 or 0..15 depending whether the chip | |
421 | * is Ultra-capable or not. These tables let us convert from one to the other. | |
422 | */ | |
423 | static const unsigned char asc_syn_xfer_period[8] = { | |
424 | 25, 30, 35, 40, 50, 60, 70, 85 | |
425 | }; | |
426 | ||
427 | static const unsigned char asc_syn_ultra_xfer_period[16] = { | |
428 | 12, 19, 25, 32, 38, 44, 50, 57, 63, 69, 75, 82, 88, 94, 100, 107 | |
429 | }; | |
1da177e4 LT |
430 | |
431 | typedef struct ext_msg { | |
27c868c2 MW |
432 | uchar msg_type; |
433 | uchar msg_len; | |
434 | uchar msg_req; | |
435 | union { | |
436 | struct { | |
437 | uchar sdtr_xfer_period; | |
438 | uchar sdtr_req_ack_offset; | |
439 | } sdtr; | |
440 | struct { | |
441 | uchar wdtr_width; | |
442 | } wdtr; | |
443 | struct { | |
444 | uchar mdp_b3; | |
445 | uchar mdp_b2; | |
446 | uchar mdp_b1; | |
447 | uchar mdp_b0; | |
448 | } mdp; | |
449 | } u_ext_msg; | |
450 | uchar res; | |
1da177e4 LT |
451 | } EXT_MSG; |
452 | ||
453 | #define xfer_period u_ext_msg.sdtr.sdtr_xfer_period | |
454 | #define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset | |
455 | #define wdtr_width u_ext_msg.wdtr.wdtr_width | |
456 | #define mdp_b3 u_ext_msg.mdp_b3 | |
457 | #define mdp_b2 u_ext_msg.mdp_b2 | |
458 | #define mdp_b1 u_ext_msg.mdp_b1 | |
459 | #define mdp_b0 u_ext_msg.mdp_b0 | |
460 | ||
461 | typedef struct asc_dvc_cfg { | |
27c868c2 MW |
462 | ASC_SCSI_BIT_ID_TYPE can_tagged_qng; |
463 | ASC_SCSI_BIT_ID_TYPE cmd_qng_enabled; | |
464 | ASC_SCSI_BIT_ID_TYPE disc_enable; | |
465 | ASC_SCSI_BIT_ID_TYPE sdtr_enable; | |
466 | uchar chip_scsi_id; | |
467 | uchar isa_dma_speed; | |
468 | uchar isa_dma_channel; | |
469 | uchar chip_version; | |
27c868c2 MW |
470 | ushort mcode_date; |
471 | ushort mcode_version; | |
472 | uchar max_tag_qng[ASC_MAX_TID + 1]; | |
27c868c2 | 473 | uchar sdtr_period_offset[ASC_MAX_TID + 1]; |
27c868c2 | 474 | uchar adapter_info[6]; |
1da177e4 LT |
475 | } ASC_DVC_CFG; |
476 | ||
477 | #define ASC_DEF_DVC_CNTL 0xFFFF | |
478 | #define ASC_DEF_CHIP_SCSI_ID 7 | |
479 | #define ASC_DEF_ISA_DMA_SPEED 4 | |
1da177e4 LT |
480 | #define ASC_INIT_STATE_BEG_GET_CFG 0x0001 |
481 | #define ASC_INIT_STATE_END_GET_CFG 0x0002 | |
482 | #define ASC_INIT_STATE_BEG_SET_CFG 0x0004 | |
483 | #define ASC_INIT_STATE_END_SET_CFG 0x0008 | |
484 | #define ASC_INIT_STATE_BEG_LOAD_MC 0x0010 | |
485 | #define ASC_INIT_STATE_END_LOAD_MC 0x0020 | |
486 | #define ASC_INIT_STATE_BEG_INQUIRY 0x0040 | |
487 | #define ASC_INIT_STATE_END_INQUIRY 0x0080 | |
488 | #define ASC_INIT_RESET_SCSI_DONE 0x0100 | |
489 | #define ASC_INIT_STATE_WITHOUT_EEP 0x8000 | |
1da177e4 LT |
490 | #define ASC_BUG_FIX_IF_NOT_DWB 0x0001 |
491 | #define ASC_BUG_FIX_ASYN_USE_SYN 0x0002 | |
1da177e4 LT |
492 | #define ASC_MIN_TAGGED_CMD 7 |
493 | #define ASC_MAX_SCSI_RESET_WAIT 30 | |
d10fb2c7 | 494 | #define ASC_OVERRUN_BSIZE 64 |
1da177e4 | 495 | |
27c868c2 | 496 | struct asc_dvc_var; /* Forward Declaration. */ |
1da177e4 | 497 | |
1da177e4 | 498 | typedef struct asc_dvc_var { |
27c868c2 MW |
499 | PortAddr iop_base; |
500 | ushort err_code; | |
501 | ushort dvc_cntl; | |
502 | ushort bug_fix_cntl; | |
503 | ushort bus_type; | |
27c868c2 MW |
504 | ASC_SCSI_BIT_ID_TYPE init_sdtr; |
505 | ASC_SCSI_BIT_ID_TYPE sdtr_done; | |
506 | ASC_SCSI_BIT_ID_TYPE use_tagged_qng; | |
507 | ASC_SCSI_BIT_ID_TYPE unit_not_ready; | |
508 | ASC_SCSI_BIT_ID_TYPE queue_full_or_busy; | |
509 | ASC_SCSI_BIT_ID_TYPE start_motor; | |
7d5d408c | 510 | uchar *overrun_buf; |
d10fb2c7 | 511 | dma_addr_t overrun_dma; |
27c868c2 MW |
512 | uchar scsi_reset_wait; |
513 | uchar chip_no; | |
ae26759e | 514 | bool is_in_int; |
27c868c2 MW |
515 | uchar max_total_qng; |
516 | uchar cur_total_qng; | |
517 | uchar in_critical_cnt; | |
27c868c2 MW |
518 | uchar last_q_shortage; |
519 | ushort init_state; | |
520 | uchar cur_dvc_qng[ASC_MAX_TID + 1]; | |
521 | uchar max_dvc_qng[ASC_MAX_TID + 1]; | |
522 | ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID + 1]; | |
523 | ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID + 1]; | |
afbb68c3 | 524 | const uchar *sdtr_period_tbl; |
27c868c2 MW |
525 | ASC_DVC_CFG *cfg; |
526 | ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer_always; | |
527 | char redo_scam; | |
528 | ushort res2; | |
529 | uchar dos_int13_table[ASC_MAX_TID + 1]; | |
95cfab6c | 530 | unsigned int max_dma_count; |
27c868c2 MW |
531 | ASC_SCSI_BIT_ID_TYPE no_scam; |
532 | ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer; | |
afbb68c3 | 533 | uchar min_sdtr_index; |
27c868c2 | 534 | uchar max_sdtr_index; |
27c868c2 | 535 | struct asc_board *drv_ptr; |
95cfab6c | 536 | unsigned int uc_break; |
1da177e4 LT |
537 | } ASC_DVC_VAR; |
538 | ||
539 | typedef struct asc_dvc_inq_info { | |
27c868c2 | 540 | uchar type[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; |
1da177e4 LT |
541 | } ASC_DVC_INQ_INFO; |
542 | ||
543 | typedef struct asc_cap_info { | |
95cfab6c HR |
544 | u32 lba; |
545 | u32 blk_size; | |
1da177e4 LT |
546 | } ASC_CAP_INFO; |
547 | ||
548 | typedef struct asc_cap_info_array { | |
27c868c2 | 549 | ASC_CAP_INFO cap_info[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; |
1da177e4 LT |
550 | } ASC_CAP_INFO_ARRAY; |
551 | ||
552 | #define ASC_MCNTL_NO_SEL_TIMEOUT (ushort)0x0001 | |
553 | #define ASC_MCNTL_NULL_TARGET (ushort)0x0002 | |
554 | #define ASC_CNTL_INITIATOR (ushort)0x0001 | |
555 | #define ASC_CNTL_BIOS_GT_1GB (ushort)0x0002 | |
556 | #define ASC_CNTL_BIOS_GT_2_DISK (ushort)0x0004 | |
557 | #define ASC_CNTL_BIOS_REMOVABLE (ushort)0x0008 | |
558 | #define ASC_CNTL_NO_SCAM (ushort)0x0010 | |
559 | #define ASC_CNTL_INT_MULTI_Q (ushort)0x0080 | |
560 | #define ASC_CNTL_NO_LUN_SUPPORT (ushort)0x0040 | |
561 | #define ASC_CNTL_NO_VERIFY_COPY (ushort)0x0100 | |
562 | #define ASC_CNTL_RESET_SCSI (ushort)0x0200 | |
563 | #define ASC_CNTL_INIT_INQUIRY (ushort)0x0400 | |
564 | #define ASC_CNTL_INIT_VERBOSE (ushort)0x0800 | |
565 | #define ASC_CNTL_SCSI_PARITY (ushort)0x1000 | |
566 | #define ASC_CNTL_BURST_MODE (ushort)0x2000 | |
567 | #define ASC_CNTL_SDTR_ENABLE_ULTRA (ushort)0x4000 | |
568 | #define ASC_EEP_DVC_CFG_BEG_VL 2 | |
569 | #define ASC_EEP_MAX_DVC_ADDR_VL 15 | |
570 | #define ASC_EEP_DVC_CFG_BEG 32 | |
571 | #define ASC_EEP_MAX_DVC_ADDR 45 | |
1da177e4 | 572 | #define ASC_EEP_MAX_RETRY 20 |
1da177e4 LT |
573 | |
574 | /* | |
575 | * These macros keep the chip SCSI id and ISA DMA speed | |
576 | * bitfields in board order. C bitfields aren't portable | |
577 | * between big and little-endian platforms so they are | |
578 | * not used. | |
579 | */ | |
580 | ||
581 | #define ASC_EEP_GET_CHIP_ID(cfg) ((cfg)->id_speed & 0x0f) | |
582 | #define ASC_EEP_GET_DMA_SPD(cfg) (((cfg)->id_speed & 0xf0) >> 4) | |
583 | #define ASC_EEP_SET_CHIP_ID(cfg, sid) \ | |
584 | ((cfg)->id_speed = ((cfg)->id_speed & 0xf0) | ((sid) & ASC_MAX_TID)) | |
585 | #define ASC_EEP_SET_DMA_SPD(cfg, spd) \ | |
586 | ((cfg)->id_speed = ((cfg)->id_speed & 0x0f) | ((spd) & 0x0f) << 4) | |
587 | ||
588 | typedef struct asceep_config { | |
27c868c2 MW |
589 | ushort cfg_lsw; |
590 | ushort cfg_msw; | |
591 | uchar init_sdtr; | |
592 | uchar disc_enable; | |
593 | uchar use_cmd_qng; | |
594 | uchar start_motor; | |
595 | uchar max_total_qng; | |
596 | uchar max_tag_qng; | |
597 | uchar bios_scan; | |
598 | uchar power_up_wait; | |
599 | uchar no_scam; | |
600 | uchar id_speed; /* low order 4 bits is chip scsi id */ | |
601 | /* high order 4 bits is isa dma speed */ | |
602 | uchar dos_int13_table[ASC_MAX_TID + 1]; | |
603 | uchar adapter_info[6]; | |
604 | ushort cntl; | |
605 | ushort chksum; | |
1da177e4 LT |
606 | } ASCEEP_CONFIG; |
607 | ||
1da177e4 LT |
608 | #define ASC_EEP_CMD_READ 0x80 |
609 | #define ASC_EEP_CMD_WRITE 0x40 | |
610 | #define ASC_EEP_CMD_WRITE_ABLE 0x30 | |
611 | #define ASC_EEP_CMD_WRITE_DISABLE 0x00 | |
1da177e4 LT |
612 | #define ASCV_MSGOUT_BEG 0x0000 |
613 | #define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3) | |
614 | #define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4) | |
615 | #define ASCV_BREAK_SAVED_CODE (ushort)0x0006 | |
616 | #define ASCV_MSGIN_BEG (ASCV_MSGOUT_BEG+8) | |
617 | #define ASCV_MSGIN_SDTR_PERIOD (ASCV_MSGIN_BEG+3) | |
618 | #define ASCV_MSGIN_SDTR_OFFSET (ASCV_MSGIN_BEG+4) | |
619 | #define ASCV_SDTR_DATA_BEG (ASCV_MSGIN_BEG+8) | |
620 | #define ASCV_SDTR_DONE_BEG (ASCV_SDTR_DATA_BEG+8) | |
621 | #define ASCV_MAX_DVC_QNG_BEG (ushort)0x0020 | |
622 | #define ASCV_BREAK_ADDR (ushort)0x0028 | |
623 | #define ASCV_BREAK_NOTIFY_COUNT (ushort)0x002A | |
624 | #define ASCV_BREAK_CONTROL (ushort)0x002C | |
625 | #define ASCV_BREAK_HIT_COUNT (ushort)0x002E | |
626 | ||
627 | #define ASCV_ASCDVC_ERR_CODE_W (ushort)0x0030 | |
628 | #define ASCV_MCODE_CHKSUM_W (ushort)0x0032 | |
629 | #define ASCV_MCODE_SIZE_W (ushort)0x0034 | |
630 | #define ASCV_STOP_CODE_B (ushort)0x0036 | |
631 | #define ASCV_DVC_ERR_CODE_B (ushort)0x0037 | |
632 | #define ASCV_OVERRUN_PADDR_D (ushort)0x0038 | |
633 | #define ASCV_OVERRUN_BSIZE_D (ushort)0x003C | |
634 | #define ASCV_HALTCODE_W (ushort)0x0040 | |
635 | #define ASCV_CHKSUM_W (ushort)0x0042 | |
636 | #define ASCV_MC_DATE_W (ushort)0x0044 | |
637 | #define ASCV_MC_VER_W (ushort)0x0046 | |
638 | #define ASCV_NEXTRDY_B (ushort)0x0048 | |
639 | #define ASCV_DONENEXT_B (ushort)0x0049 | |
640 | #define ASCV_USE_TAGGED_QNG_B (ushort)0x004A | |
641 | #define ASCV_SCSIBUSY_B (ushort)0x004B | |
642 | #define ASCV_Q_DONE_IN_PROGRESS_B (ushort)0x004C | |
643 | #define ASCV_CURCDB_B (ushort)0x004D | |
644 | #define ASCV_RCLUN_B (ushort)0x004E | |
645 | #define ASCV_BUSY_QHEAD_B (ushort)0x004F | |
646 | #define ASCV_DISC1_QHEAD_B (ushort)0x0050 | |
647 | #define ASCV_DISC_ENABLE_B (ushort)0x0052 | |
648 | #define ASCV_CAN_TAGGED_QNG_B (ushort)0x0053 | |
649 | #define ASCV_HOSTSCSI_ID_B (ushort)0x0055 | |
650 | #define ASCV_MCODE_CNTL_B (ushort)0x0056 | |
651 | #define ASCV_NULL_TARGET_B (ushort)0x0057 | |
652 | #define ASCV_FREE_Q_HEAD_W (ushort)0x0058 | |
653 | #define ASCV_DONE_Q_TAIL_W (ushort)0x005A | |
654 | #define ASCV_FREE_Q_HEAD_B (ushort)(ASCV_FREE_Q_HEAD_W+1) | |
655 | #define ASCV_DONE_Q_TAIL_B (ushort)(ASCV_DONE_Q_TAIL_W+1) | |
656 | #define ASCV_HOST_FLAG_B (ushort)0x005D | |
657 | #define ASCV_TOTAL_READY_Q_B (ushort)0x0064 | |
658 | #define ASCV_VER_SERIAL_B (ushort)0x0065 | |
659 | #define ASCV_HALTCODE_SAVED_W (ushort)0x0066 | |
660 | #define ASCV_WTM_FLAG_B (ushort)0x0068 | |
661 | #define ASCV_RISC_FLAG_B (ushort)0x006A | |
662 | #define ASCV_REQ_SG_LIST_QP (ushort)0x006B | |
663 | #define ASC_HOST_FLAG_IN_ISR 0x01 | |
664 | #define ASC_HOST_FLAG_ACK_INT 0x02 | |
665 | #define ASC_RISC_FLAG_GEN_INT 0x01 | |
666 | #define ASC_RISC_FLAG_REQ_SG_LIST 0x02 | |
667 | #define IOP_CTRL (0x0F) | |
668 | #define IOP_STATUS (0x0E) | |
669 | #define IOP_INT_ACK IOP_STATUS | |
670 | #define IOP_REG_IFC (0x0D) | |
671 | #define IOP_SYN_OFFSET (0x0B) | |
672 | #define IOP_EXTRA_CONTROL (0x0D) | |
673 | #define IOP_REG_PC (0x0C) | |
674 | #define IOP_RAM_ADDR (0x0A) | |
675 | #define IOP_RAM_DATA (0x08) | |
676 | #define IOP_EEP_DATA (0x06) | |
677 | #define IOP_EEP_CMD (0x07) | |
678 | #define IOP_VERSION (0x03) | |
679 | #define IOP_CONFIG_HIGH (0x04) | |
680 | #define IOP_CONFIG_LOW (0x02) | |
681 | #define IOP_SIG_BYTE (0x01) | |
682 | #define IOP_SIG_WORD (0x00) | |
683 | #define IOP_REG_DC1 (0x0E) | |
684 | #define IOP_REG_DC0 (0x0C) | |
685 | #define IOP_REG_SB (0x0B) | |
686 | #define IOP_REG_DA1 (0x0A) | |
687 | #define IOP_REG_DA0 (0x08) | |
688 | #define IOP_REG_SC (0x09) | |
689 | #define IOP_DMA_SPEED (0x07) | |
690 | #define IOP_REG_FLAG (0x07) | |
691 | #define IOP_FIFO_H (0x06) | |
692 | #define IOP_FIFO_L (0x04) | |
693 | #define IOP_REG_ID (0x05) | |
694 | #define IOP_REG_QP (0x03) | |
695 | #define IOP_REG_IH (0x02) | |
696 | #define IOP_REG_IX (0x01) | |
697 | #define IOP_REG_AX (0x00) | |
698 | #define IFC_REG_LOCK (0x00) | |
699 | #define IFC_REG_UNLOCK (0x09) | |
700 | #define IFC_WR_EN_FILTER (0x10) | |
701 | #define IFC_RD_NO_EEPROM (0x10) | |
702 | #define IFC_SLEW_RATE (0x20) | |
703 | #define IFC_ACT_NEG (0x40) | |
704 | #define IFC_INP_FILTER (0x80) | |
705 | #define IFC_INIT_DEFAULT (IFC_ACT_NEG | IFC_REG_UNLOCK) | |
706 | #define SC_SEL (uchar)(0x80) | |
707 | #define SC_BSY (uchar)(0x40) | |
708 | #define SC_ACK (uchar)(0x20) | |
709 | #define SC_REQ (uchar)(0x10) | |
710 | #define SC_ATN (uchar)(0x08) | |
711 | #define SC_IO (uchar)(0x04) | |
712 | #define SC_CD (uchar)(0x02) | |
713 | #define SC_MSG (uchar)(0x01) | |
714 | #define SEC_SCSI_CTL (uchar)(0x80) | |
715 | #define SEC_ACTIVE_NEGATE (uchar)(0x40) | |
716 | #define SEC_SLEW_RATE (uchar)(0x20) | |
717 | #define SEC_ENABLE_FILTER (uchar)(0x10) | |
718 | #define ASC_HALT_EXTMSG_IN (ushort)0x8000 | |
719 | #define ASC_HALT_CHK_CONDITION (ushort)0x8100 | |
720 | #define ASC_HALT_SS_QUEUE_FULL (ushort)0x8200 | |
721 | #define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX (ushort)0x8300 | |
722 | #define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX (ushort)0x8400 | |
723 | #define ASC_HALT_SDTR_REJECTED (ushort)0x4000 | |
724 | #define ASC_HALT_HOST_COPY_SG_LIST_TO_RISC ( ushort )0x2000 | |
725 | #define ASC_MAX_QNO 0xF8 | |
726 | #define ASC_DATA_SEC_BEG (ushort)0x0080 | |
727 | #define ASC_DATA_SEC_END (ushort)0x0080 | |
728 | #define ASC_CODE_SEC_BEG (ushort)0x0080 | |
729 | #define ASC_CODE_SEC_END (ushort)0x0080 | |
730 | #define ASC_QADR_BEG (0x4000) | |
731 | #define ASC_QADR_USED (ushort)(ASC_MAX_QNO * 64) | |
732 | #define ASC_QADR_END (ushort)0x7FFF | |
733 | #define ASC_QLAST_ADR (ushort)0x7FC0 | |
734 | #define ASC_QBLK_SIZE 0x40 | |
735 | #define ASC_BIOS_DATA_QBEG 0xF8 | |
736 | #define ASC_MIN_ACTIVE_QNO 0x01 | |
737 | #define ASC_QLINK_END 0xFF | |
738 | #define ASC_EEPROM_WORDS 0x10 | |
739 | #define ASC_MAX_MGS_LEN 0x10 | |
740 | #define ASC_BIOS_ADDR_DEF 0xDC00 | |
741 | #define ASC_BIOS_SIZE 0x3800 | |
742 | #define ASC_BIOS_RAM_OFF 0x3800 | |
743 | #define ASC_BIOS_RAM_SIZE 0x800 | |
744 | #define ASC_BIOS_MIN_ADDR 0xC000 | |
745 | #define ASC_BIOS_MAX_ADDR 0xEC00 | |
746 | #define ASC_BIOS_BANK_SIZE 0x0400 | |
747 | #define ASC_MCODE_START_ADDR 0x0080 | |
748 | #define ASC_CFG0_HOST_INT_ON 0x0020 | |
749 | #define ASC_CFG0_BIOS_ON 0x0040 | |
750 | #define ASC_CFG0_VERA_BURST_ON 0x0080 | |
751 | #define ASC_CFG0_SCSI_PARITY_ON 0x0800 | |
752 | #define ASC_CFG1_SCSI_TARGET_ON 0x0080 | |
753 | #define ASC_CFG1_LRAM_8BITS_ON 0x0800 | |
754 | #define ASC_CFG_MSW_CLR_MASK 0x3080 | |
755 | #define CSW_TEST1 (ASC_CS_TYPE)0x8000 | |
756 | #define CSW_AUTO_CONFIG (ASC_CS_TYPE)0x4000 | |
757 | #define CSW_RESERVED1 (ASC_CS_TYPE)0x2000 | |
758 | #define CSW_IRQ_WRITTEN (ASC_CS_TYPE)0x1000 | |
759 | #define CSW_33MHZ_SELECTED (ASC_CS_TYPE)0x0800 | |
760 | #define CSW_TEST2 (ASC_CS_TYPE)0x0400 | |
761 | #define CSW_TEST3 (ASC_CS_TYPE)0x0200 | |
762 | #define CSW_RESERVED2 (ASC_CS_TYPE)0x0100 | |
763 | #define CSW_DMA_DONE (ASC_CS_TYPE)0x0080 | |
764 | #define CSW_FIFO_RDY (ASC_CS_TYPE)0x0040 | |
765 | #define CSW_EEP_READ_DONE (ASC_CS_TYPE)0x0020 | |
766 | #define CSW_HALTED (ASC_CS_TYPE)0x0010 | |
767 | #define CSW_SCSI_RESET_ACTIVE (ASC_CS_TYPE)0x0008 | |
768 | #define CSW_PARITY_ERR (ASC_CS_TYPE)0x0004 | |
769 | #define CSW_SCSI_RESET_LATCH (ASC_CS_TYPE)0x0002 | |
770 | #define CSW_INT_PENDING (ASC_CS_TYPE)0x0001 | |
771 | #define CIW_CLR_SCSI_RESET_INT (ASC_CS_TYPE)0x1000 | |
772 | #define CIW_INT_ACK (ASC_CS_TYPE)0x0100 | |
773 | #define CIW_TEST1 (ASC_CS_TYPE)0x0200 | |
774 | #define CIW_TEST2 (ASC_CS_TYPE)0x0400 | |
775 | #define CIW_SEL_33MHZ (ASC_CS_TYPE)0x0800 | |
776 | #define CIW_IRQ_ACT (ASC_CS_TYPE)0x1000 | |
777 | #define CC_CHIP_RESET (uchar)0x80 | |
778 | #define CC_SCSI_RESET (uchar)0x40 | |
779 | #define CC_HALT (uchar)0x20 | |
780 | #define CC_SINGLE_STEP (uchar)0x10 | |
781 | #define CC_DMA_ABLE (uchar)0x08 | |
782 | #define CC_TEST (uchar)0x04 | |
783 | #define CC_BANK_ONE (uchar)0x02 | |
784 | #define CC_DIAG (uchar)0x01 | |
785 | #define ASC_1000_ID0W 0x04C1 | |
786 | #define ASC_1000_ID0W_FIX 0x00C1 | |
787 | #define ASC_1000_ID1B 0x25 | |
1da177e4 | 788 | #define ASC_EISA_REV_IOP_MASK (0x0C83) |
1da177e4 LT |
789 | #define ASC_EISA_CFG_IOP_MASK (0x0C86) |
790 | #define ASC_GET_EISA_SLOT(iop) (PortAddr)((iop) & 0xF000) | |
1da177e4 LT |
791 | #define INS_HALTINT (ushort)0x6281 |
792 | #define INS_HALT (ushort)0x6280 | |
793 | #define INS_SINT (ushort)0x6200 | |
794 | #define INS_RFLAG_WTM (ushort)0x7380 | |
795 | #define ASC_MC_SAVE_CODE_WSIZE 0x500 | |
796 | #define ASC_MC_SAVE_DATA_WSIZE 0x40 | |
797 | ||
798 | typedef struct asc_mc_saved { | |
27c868c2 MW |
799 | ushort data[ASC_MC_SAVE_DATA_WSIZE]; |
800 | ushort code[ASC_MC_SAVE_CODE_WSIZE]; | |
1da177e4 LT |
801 | } ASC_MC_SAVED; |
802 | ||
803 | #define AscGetQDoneInProgress(port) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B) | |
804 | #define AscPutQDoneInProgress(port, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B, val) | |
805 | #define AscGetVarFreeQHead(port) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W) | |
806 | #define AscGetVarDoneQTail(port) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W) | |
807 | #define AscPutVarFreeQHead(port, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W, val) | |
808 | #define AscPutVarDoneQTail(port, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W, val) | |
809 | #define AscGetRiscVarFreeQHead(port) AscReadLramByte((port), ASCV_NEXTRDY_B) | |
810 | #define AscGetRiscVarDoneQTail(port) AscReadLramByte((port), ASCV_DONENEXT_B) | |
811 | #define AscPutRiscVarFreeQHead(port, val) AscWriteLramByte((port), ASCV_NEXTRDY_B, val) | |
812 | #define AscPutRiscVarDoneQTail(port, val) AscWriteLramByte((port), ASCV_DONENEXT_B, val) | |
51219358 MW |
813 | #define AscPutMCodeSDTRDoneAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id), (data)) |
814 | #define AscGetMCodeSDTRDoneAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id)) | |
815 | #define AscPutMCodeInitSDTRAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id), data) | |
816 | #define AscGetMCodeInitSDTRAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id)) | |
1da177e4 LT |
817 | #define AscGetChipSignatureByte(port) (uchar)inp((port)+IOP_SIG_BYTE) |
818 | #define AscGetChipSignatureWord(port) (ushort)inpw((port)+IOP_SIG_WORD) | |
819 | #define AscGetChipVerNo(port) (uchar)inp((port)+IOP_VERSION) | |
820 | #define AscGetChipCfgLsw(port) (ushort)inpw((port)+IOP_CONFIG_LOW) | |
821 | #define AscGetChipCfgMsw(port) (ushort)inpw((port)+IOP_CONFIG_HIGH) | |
822 | #define AscSetChipCfgLsw(port, data) outpw((port)+IOP_CONFIG_LOW, data) | |
823 | #define AscSetChipCfgMsw(port, data) outpw((port)+IOP_CONFIG_HIGH, data) | |
824 | #define AscGetChipEEPCmd(port) (uchar)inp((port)+IOP_EEP_CMD) | |
825 | #define AscSetChipEEPCmd(port, data) outp((port)+IOP_EEP_CMD, data) | |
826 | #define AscGetChipEEPData(port) (ushort)inpw((port)+IOP_EEP_DATA) | |
827 | #define AscSetChipEEPData(port, data) outpw((port)+IOP_EEP_DATA, data) | |
828 | #define AscGetChipLramAddr(port) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR)) | |
829 | #define AscSetChipLramAddr(port, addr) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr) | |
830 | #define AscGetChipLramData(port) (ushort)inpw((port)+IOP_RAM_DATA) | |
831 | #define AscSetChipLramData(port, data) outpw((port)+IOP_RAM_DATA, data) | |
832 | #define AscGetChipIFC(port) (uchar)inp((port)+IOP_REG_IFC) | |
833 | #define AscSetChipIFC(port, data) outp((port)+IOP_REG_IFC, data) | |
834 | #define AscGetChipStatus(port) (ASC_CS_TYPE)inpw((port)+IOP_STATUS) | |
835 | #define AscSetChipStatus(port, cs_val) outpw((port)+IOP_STATUS, cs_val) | |
836 | #define AscGetChipControl(port) (uchar)inp((port)+IOP_CTRL) | |
837 | #define AscSetChipControl(port, cc_val) outp((port)+IOP_CTRL, cc_val) | |
838 | #define AscGetChipSyn(port) (uchar)inp((port)+IOP_SYN_OFFSET) | |
839 | #define AscSetChipSyn(port, data) outp((port)+IOP_SYN_OFFSET, data) | |
840 | #define AscSetPCAddr(port, data) outpw((port)+IOP_REG_PC, data) | |
841 | #define AscGetPCAddr(port) (ushort)inpw((port)+IOP_REG_PC) | |
842 | #define AscIsIntPending(port) (AscGetChipStatus(port) & (CSW_INT_PENDING | CSW_SCSI_RESET_LATCH)) | |
843 | #define AscGetChipScsiID(port) ((AscGetChipCfgLsw(port) >> 8) & ASC_MAX_TID) | |
844 | #define AscGetExtraControl(port) (uchar)inp((port)+IOP_EXTRA_CONTROL) | |
845 | #define AscSetExtraControl(port, data) outp((port)+IOP_EXTRA_CONTROL, data) | |
846 | #define AscReadChipAX(port) (ushort)inpw((port)+IOP_REG_AX) | |
847 | #define AscWriteChipAX(port, data) outpw((port)+IOP_REG_AX, data) | |
848 | #define AscReadChipIX(port) (uchar)inp((port)+IOP_REG_IX) | |
849 | #define AscWriteChipIX(port, data) outp((port)+IOP_REG_IX, data) | |
850 | #define AscReadChipIH(port) (ushort)inpw((port)+IOP_REG_IH) | |
851 | #define AscWriteChipIH(port, data) outpw((port)+IOP_REG_IH, data) | |
852 | #define AscReadChipQP(port) (uchar)inp((port)+IOP_REG_QP) | |
853 | #define AscWriteChipQP(port, data) outp((port)+IOP_REG_QP, data) | |
854 | #define AscReadChipFIFO_L(port) (ushort)inpw((port)+IOP_REG_FIFO_L) | |
855 | #define AscWriteChipFIFO_L(port, data) outpw((port)+IOP_REG_FIFO_L, data) | |
856 | #define AscReadChipFIFO_H(port) (ushort)inpw((port)+IOP_REG_FIFO_H) | |
857 | #define AscWriteChipFIFO_H(port, data) outpw((port)+IOP_REG_FIFO_H, data) | |
858 | #define AscReadChipDmaSpeed(port) (uchar)inp((port)+IOP_DMA_SPEED) | |
859 | #define AscWriteChipDmaSpeed(port, data) outp((port)+IOP_DMA_SPEED, data) | |
860 | #define AscReadChipDA0(port) (ushort)inpw((port)+IOP_REG_DA0) | |
861 | #define AscWriteChipDA0(port) outpw((port)+IOP_REG_DA0, data) | |
862 | #define AscReadChipDA1(port) (ushort)inpw((port)+IOP_REG_DA1) | |
863 | #define AscWriteChipDA1(port) outpw((port)+IOP_REG_DA1, data) | |
864 | #define AscReadChipDC0(port) (ushort)inpw((port)+IOP_REG_DC0) | |
865 | #define AscWriteChipDC0(port) outpw((port)+IOP_REG_DC0, data) | |
866 | #define AscReadChipDC1(port) (ushort)inpw((port)+IOP_REG_DC1) | |
867 | #define AscWriteChipDC1(port) outpw((port)+IOP_REG_DC1, data) | |
868 | #define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID) | |
869 | #define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data) | |
870 | ||
27c868c2 | 871 | #define AdvPortAddr void __iomem * /* Virtual memory address size */ |
1da177e4 LT |
872 | |
873 | /* | |
874 | * Define Adv Library required memory access macros. | |
875 | */ | |
876 | #define ADV_MEM_READB(addr) readb(addr) | |
877 | #define ADV_MEM_READW(addr) readw(addr) | |
878 | #define ADV_MEM_WRITEB(addr, byte) writeb(byte, addr) | |
879 | #define ADV_MEM_WRITEW(addr, word) writew(word, addr) | |
880 | #define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr) | |
881 | ||
1da177e4 LT |
882 | /* |
883 | * Define total number of simultaneous maximum element scatter-gather | |
884 | * request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the | |
885 | * maximum number of outstanding commands per wide host adapter. Each | |
886 | * command uses one or more ADV_SG_BLOCK each with 15 scatter-gather | |
887 | * elements. Allow each command to have at least one ADV_SG_BLOCK structure. | |
888 | * This allows about 15 commands to have the maximum 17 ADV_SG_BLOCK | |
889 | * structures or 255 scatter-gather elements. | |
1da177e4 LT |
890 | */ |
891 | #define ADV_TOT_SG_BLOCK ASC_DEF_MAX_HOST_QNG | |
892 | ||
893 | /* | |
98d41c29 | 894 | * Define maximum number of scatter-gather elements per request. |
1da177e4 LT |
895 | */ |
896 | #define ADV_MAX_SG_LIST 255 | |
98d41c29 | 897 | #define NO_OF_SG_PER_BLOCK 15 |
1da177e4 | 898 | |
1da177e4 LT |
899 | #define ADV_EEP_DVC_CFG_BEGIN (0x00) |
900 | #define ADV_EEP_DVC_CFG_END (0x15) | |
27c868c2 | 901 | #define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ |
1da177e4 LT |
902 | #define ADV_EEP_MAX_WORD_ADDR (0x1E) |
903 | ||
904 | #define ADV_EEP_DELAY_MS 100 | |
905 | ||
27c868c2 MW |
906 | #define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ |
907 | #define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ | |
1da177e4 LT |
908 | /* |
909 | * For the ASC3550 Bit 13 is Termination Polarity control bit. | |
910 | * For later ICs Bit 13 controls whether the CIS (Card Information | |
911 | * Service Section) is loaded from EEPROM. | |
912 | */ | |
27c868c2 MW |
913 | #define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ |
914 | #define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */ | |
1da177e4 LT |
915 | /* |
916 | * ASC38C1600 Bit 11 | |
917 | * | |
918 | * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify | |
919 | * INT A in the PCI Configuration Space Int Pin field. If it is 1, then | |
920 | * Function 0 will specify INT B. | |
921 | * | |
922 | * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify | |
923 | * INT B in the PCI Configuration Space Int Pin field. If it is 1, then | |
924 | * Function 1 will specify INT A. | |
925 | */ | |
27c868c2 MW |
926 | #define ADV_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */ |
927 | ||
928 | typedef struct adveep_3550_config { | |
929 | /* Word Offset, Description */ | |
930 | ||
931 | ushort cfg_lsw; /* 00 power up initialization */ | |
932 | /* bit 13 set - Term Polarity Control */ | |
933 | /* bit 14 set - BIOS Enable */ | |
934 | /* bit 15 set - Big Endian Mode */ | |
935 | ushort cfg_msw; /* 01 unused */ | |
936 | ushort disc_enable; /* 02 disconnect enable */ | |
937 | ushort wdtr_able; /* 03 Wide DTR able */ | |
938 | ushort sdtr_able; /* 04 Synchronous DTR able */ | |
939 | ushort start_motor; /* 05 send start up motor */ | |
940 | ushort tagqng_able; /* 06 tag queuing able */ | |
941 | ushort bios_scan; /* 07 BIOS device control */ | |
942 | ushort scam_tolerant; /* 08 no scam */ | |
943 | ||
944 | uchar adapter_scsi_id; /* 09 Host Adapter ID */ | |
945 | uchar bios_boot_delay; /* power up wait */ | |
946 | ||
947 | uchar scsi_reset_delay; /* 10 reset delay */ | |
948 | uchar bios_id_lun; /* first boot device scsi id & lun */ | |
949 | /* high nibble is lun */ | |
950 | /* low nibble is scsi id */ | |
951 | ||
952 | uchar termination; /* 11 0 - automatic */ | |
953 | /* 1 - low off / high off */ | |
954 | /* 2 - low off / high on */ | |
955 | /* 3 - low on / high on */ | |
956 | /* There is no low on / high off */ | |
957 | ||
958 | uchar reserved1; /* reserved byte (not used) */ | |
959 | ||
960 | ushort bios_ctrl; /* 12 BIOS control bits */ | |
961 | /* bit 0 BIOS don't act as initiator. */ | |
962 | /* bit 1 BIOS > 1 GB support */ | |
963 | /* bit 2 BIOS > 2 Disk Support */ | |
964 | /* bit 3 BIOS don't support removables */ | |
965 | /* bit 4 BIOS support bootable CD */ | |
966 | /* bit 5 BIOS scan enabled */ | |
967 | /* bit 6 BIOS support multiple LUNs */ | |
968 | /* bit 7 BIOS display of message */ | |
969 | /* bit 8 SCAM disabled */ | |
970 | /* bit 9 Reset SCSI bus during init. */ | |
971 | /* bit 10 */ | |
972 | /* bit 11 No verbose initialization. */ | |
973 | /* bit 12 SCSI parity enabled */ | |
974 | /* bit 13 */ | |
975 | /* bit 14 */ | |
976 | /* bit 15 */ | |
977 | ushort ultra_able; /* 13 ULTRA speed able */ | |
978 | ushort reserved2; /* 14 reserved */ | |
979 | uchar max_host_qng; /* 15 maximum host queuing */ | |
980 | uchar max_dvc_qng; /* maximum per device queuing */ | |
981 | ushort dvc_cntl; /* 16 control bit for driver */ | |
982 | ushort bug_fix; /* 17 control bit for bug fix */ | |
983 | ushort serial_number_word1; /* 18 Board serial number word 1 */ | |
984 | ushort serial_number_word2; /* 19 Board serial number word 2 */ | |
985 | ushort serial_number_word3; /* 20 Board serial number word 3 */ | |
986 | ushort check_sum; /* 21 EEP check sum */ | |
987 | uchar oem_name[16]; /* 22 OEM name */ | |
988 | ushort dvc_err_code; /* 30 last device driver error code */ | |
989 | ushort adv_err_code; /* 31 last uc and Adv Lib error code */ | |
990 | ushort adv_err_addr; /* 32 last uc error address */ | |
991 | ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ | |
992 | ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ | |
993 | ushort saved_adv_err_addr; /* 35 saved last uc error address */ | |
994 | ushort num_of_err; /* 36 number of error */ | |
1da177e4 LT |
995 | } ADVEEP_3550_CONFIG; |
996 | ||
27c868c2 MW |
997 | typedef struct adveep_38C0800_config { |
998 | /* Word Offset, Description */ | |
999 | ||
1000 | ushort cfg_lsw; /* 00 power up initialization */ | |
1001 | /* bit 13 set - Load CIS */ | |
1002 | /* bit 14 set - BIOS Enable */ | |
1003 | /* bit 15 set - Big Endian Mode */ | |
1004 | ushort cfg_msw; /* 01 unused */ | |
1005 | ushort disc_enable; /* 02 disconnect enable */ | |
1006 | ushort wdtr_able; /* 03 Wide DTR able */ | |
1007 | ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ | |
1008 | ushort start_motor; /* 05 send start up motor */ | |
1009 | ushort tagqng_able; /* 06 tag queuing able */ | |
1010 | ushort bios_scan; /* 07 BIOS device control */ | |
1011 | ushort scam_tolerant; /* 08 no scam */ | |
1012 | ||
1013 | uchar adapter_scsi_id; /* 09 Host Adapter ID */ | |
1014 | uchar bios_boot_delay; /* power up wait */ | |
1015 | ||
1016 | uchar scsi_reset_delay; /* 10 reset delay */ | |
1017 | uchar bios_id_lun; /* first boot device scsi id & lun */ | |
1018 | /* high nibble is lun */ | |
1019 | /* low nibble is scsi id */ | |
1020 | ||
1021 | uchar termination_se; /* 11 0 - automatic */ | |
1022 | /* 1 - low off / high off */ | |
1023 | /* 2 - low off / high on */ | |
1024 | /* 3 - low on / high on */ | |
1025 | /* There is no low on / high off */ | |
1026 | ||
1027 | uchar termination_lvd; /* 11 0 - automatic */ | |
1028 | /* 1 - low off / high off */ | |
1029 | /* 2 - low off / high on */ | |
1030 | /* 3 - low on / high on */ | |
1031 | /* There is no low on / high off */ | |
1032 | ||
1033 | ushort bios_ctrl; /* 12 BIOS control bits */ | |
1034 | /* bit 0 BIOS don't act as initiator. */ | |
1035 | /* bit 1 BIOS > 1 GB support */ | |
1036 | /* bit 2 BIOS > 2 Disk Support */ | |
1037 | /* bit 3 BIOS don't support removables */ | |
1038 | /* bit 4 BIOS support bootable CD */ | |
1039 | /* bit 5 BIOS scan enabled */ | |
1040 | /* bit 6 BIOS support multiple LUNs */ | |
1041 | /* bit 7 BIOS display of message */ | |
1042 | /* bit 8 SCAM disabled */ | |
1043 | /* bit 9 Reset SCSI bus during init. */ | |
1044 | /* bit 10 */ | |
1045 | /* bit 11 No verbose initialization. */ | |
1046 | /* bit 12 SCSI parity enabled */ | |
1047 | /* bit 13 */ | |
1048 | /* bit 14 */ | |
1049 | /* bit 15 */ | |
1050 | ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ | |
1051 | ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ | |
1052 | uchar max_host_qng; /* 15 maximum host queueing */ | |
1053 | uchar max_dvc_qng; /* maximum per device queuing */ | |
1054 | ushort dvc_cntl; /* 16 control bit for driver */ | |
1055 | ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ | |
1056 | ushort serial_number_word1; /* 18 Board serial number word 1 */ | |
1057 | ushort serial_number_word2; /* 19 Board serial number word 2 */ | |
1058 | ushort serial_number_word3; /* 20 Board serial number word 3 */ | |
1059 | ushort check_sum; /* 21 EEP check sum */ | |
1060 | uchar oem_name[16]; /* 22 OEM name */ | |
1061 | ushort dvc_err_code; /* 30 last device driver error code */ | |
1062 | ushort adv_err_code; /* 31 last uc and Adv Lib error code */ | |
1063 | ushort adv_err_addr; /* 32 last uc error address */ | |
1064 | ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ | |
1065 | ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ | |
1066 | ushort saved_adv_err_addr; /* 35 saved last uc error address */ | |
1067 | ushort reserved36; /* 36 reserved */ | |
1068 | ushort reserved37; /* 37 reserved */ | |
1069 | ushort reserved38; /* 38 reserved */ | |
1070 | ushort reserved39; /* 39 reserved */ | |
1071 | ushort reserved40; /* 40 reserved */ | |
1072 | ushort reserved41; /* 41 reserved */ | |
1073 | ushort reserved42; /* 42 reserved */ | |
1074 | ushort reserved43; /* 43 reserved */ | |
1075 | ushort reserved44; /* 44 reserved */ | |
1076 | ushort reserved45; /* 45 reserved */ | |
1077 | ushort reserved46; /* 46 reserved */ | |
1078 | ushort reserved47; /* 47 reserved */ | |
1079 | ushort reserved48; /* 48 reserved */ | |
1080 | ushort reserved49; /* 49 reserved */ | |
1081 | ushort reserved50; /* 50 reserved */ | |
1082 | ushort reserved51; /* 51 reserved */ | |
1083 | ushort reserved52; /* 52 reserved */ | |
1084 | ushort reserved53; /* 53 reserved */ | |
1085 | ushort reserved54; /* 54 reserved */ | |
1086 | ushort reserved55; /* 55 reserved */ | |
1087 | ushort cisptr_lsw; /* 56 CIS PTR LSW */ | |
1088 | ushort cisprt_msw; /* 57 CIS PTR MSW */ | |
1089 | ushort subsysvid; /* 58 SubSystem Vendor ID */ | |
1090 | ushort subsysid; /* 59 SubSystem ID */ | |
1091 | ushort reserved60; /* 60 reserved */ | |
1092 | ushort reserved61; /* 61 reserved */ | |
1093 | ushort reserved62; /* 62 reserved */ | |
1094 | ushort reserved63; /* 63 reserved */ | |
1da177e4 LT |
1095 | } ADVEEP_38C0800_CONFIG; |
1096 | ||
27c868c2 MW |
1097 | typedef struct adveep_38C1600_config { |
1098 | /* Word Offset, Description */ | |
1099 | ||
1100 | ushort cfg_lsw; /* 00 power up initialization */ | |
1101 | /* bit 11 set - Func. 0 INTB, Func. 1 INTA */ | |
1102 | /* clear - Func. 0 INTA, Func. 1 INTB */ | |
1103 | /* bit 13 set - Load CIS */ | |
1104 | /* bit 14 set - BIOS Enable */ | |
1105 | /* bit 15 set - Big Endian Mode */ | |
1106 | ushort cfg_msw; /* 01 unused */ | |
1107 | ushort disc_enable; /* 02 disconnect enable */ | |
1108 | ushort wdtr_able; /* 03 Wide DTR able */ | |
1109 | ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ | |
1110 | ushort start_motor; /* 05 send start up motor */ | |
1111 | ushort tagqng_able; /* 06 tag queuing able */ | |
1112 | ushort bios_scan; /* 07 BIOS device control */ | |
1113 | ushort scam_tolerant; /* 08 no scam */ | |
1114 | ||
1115 | uchar adapter_scsi_id; /* 09 Host Adapter ID */ | |
1116 | uchar bios_boot_delay; /* power up wait */ | |
1117 | ||
1118 | uchar scsi_reset_delay; /* 10 reset delay */ | |
1119 | uchar bios_id_lun; /* first boot device scsi id & lun */ | |
1120 | /* high nibble is lun */ | |
1121 | /* low nibble is scsi id */ | |
1122 | ||
1123 | uchar termination_se; /* 11 0 - automatic */ | |
1124 | /* 1 - low off / high off */ | |
1125 | /* 2 - low off / high on */ | |
1126 | /* 3 - low on / high on */ | |
1127 | /* There is no low on / high off */ | |
1128 | ||
1129 | uchar termination_lvd; /* 11 0 - automatic */ | |
1130 | /* 1 - low off / high off */ | |
1131 | /* 2 - low off / high on */ | |
1132 | /* 3 - low on / high on */ | |
1133 | /* There is no low on / high off */ | |
1134 | ||
1135 | ushort bios_ctrl; /* 12 BIOS control bits */ | |
1136 | /* bit 0 BIOS don't act as initiator. */ | |
1137 | /* bit 1 BIOS > 1 GB support */ | |
1138 | /* bit 2 BIOS > 2 Disk Support */ | |
1139 | /* bit 3 BIOS don't support removables */ | |
1140 | /* bit 4 BIOS support bootable CD */ | |
1141 | /* bit 5 BIOS scan enabled */ | |
1142 | /* bit 6 BIOS support multiple LUNs */ | |
1143 | /* bit 7 BIOS display of message */ | |
1144 | /* bit 8 SCAM disabled */ | |
1145 | /* bit 9 Reset SCSI bus during init. */ | |
1146 | /* bit 10 Basic Integrity Checking disabled */ | |
1147 | /* bit 11 No verbose initialization. */ | |
1148 | /* bit 12 SCSI parity enabled */ | |
1149 | /* bit 13 AIPP (Asyn. Info. Ph. Prot.) dis. */ | |
1150 | /* bit 14 */ | |
1151 | /* bit 15 */ | |
1152 | ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ | |
1153 | ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ | |
1154 | uchar max_host_qng; /* 15 maximum host queueing */ | |
1155 | uchar max_dvc_qng; /* maximum per device queuing */ | |
1156 | ushort dvc_cntl; /* 16 control bit for driver */ | |
1157 | ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ | |
1158 | ushort serial_number_word1; /* 18 Board serial number word 1 */ | |
1159 | ushort serial_number_word2; /* 19 Board serial number word 2 */ | |
1160 | ushort serial_number_word3; /* 20 Board serial number word 3 */ | |
1161 | ushort check_sum; /* 21 EEP check sum */ | |
1162 | uchar oem_name[16]; /* 22 OEM name */ | |
1163 | ushort dvc_err_code; /* 30 last device driver error code */ | |
1164 | ushort adv_err_code; /* 31 last uc and Adv Lib error code */ | |
1165 | ushort adv_err_addr; /* 32 last uc error address */ | |
1166 | ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ | |
1167 | ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ | |
1168 | ushort saved_adv_err_addr; /* 35 saved last uc error address */ | |
1169 | ushort reserved36; /* 36 reserved */ | |
1170 | ushort reserved37; /* 37 reserved */ | |
1171 | ushort reserved38; /* 38 reserved */ | |
1172 | ushort reserved39; /* 39 reserved */ | |
1173 | ushort reserved40; /* 40 reserved */ | |
1174 | ushort reserved41; /* 41 reserved */ | |
1175 | ushort reserved42; /* 42 reserved */ | |
1176 | ushort reserved43; /* 43 reserved */ | |
1177 | ushort reserved44; /* 44 reserved */ | |
1178 | ushort reserved45; /* 45 reserved */ | |
1179 | ushort reserved46; /* 46 reserved */ | |
1180 | ushort reserved47; /* 47 reserved */ | |
1181 | ushort reserved48; /* 48 reserved */ | |
1182 | ushort reserved49; /* 49 reserved */ | |
1183 | ushort reserved50; /* 50 reserved */ | |
1184 | ushort reserved51; /* 51 reserved */ | |
1185 | ushort reserved52; /* 52 reserved */ | |
1186 | ushort reserved53; /* 53 reserved */ | |
1187 | ushort reserved54; /* 54 reserved */ | |
1188 | ushort reserved55; /* 55 reserved */ | |
1189 | ushort cisptr_lsw; /* 56 CIS PTR LSW */ | |
1190 | ushort cisprt_msw; /* 57 CIS PTR MSW */ | |
1191 | ushort subsysvid; /* 58 SubSystem Vendor ID */ | |
1192 | ushort subsysid; /* 59 SubSystem ID */ | |
1193 | ushort reserved60; /* 60 reserved */ | |
1194 | ushort reserved61; /* 61 reserved */ | |
1195 | ushort reserved62; /* 62 reserved */ | |
1196 | ushort reserved63; /* 63 reserved */ | |
1da177e4 LT |
1197 | } ADVEEP_38C1600_CONFIG; |
1198 | ||
1199 | /* | |
1200 | * EEPROM Commands | |
1201 | */ | |
1202 | #define ASC_EEP_CMD_DONE 0x0200 | |
1da177e4 LT |
1203 | |
1204 | /* bios_ctrl */ | |
1205 | #define BIOS_CTRL_BIOS 0x0001 | |
1206 | #define BIOS_CTRL_EXTENDED_XLAT 0x0002 | |
1207 | #define BIOS_CTRL_GT_2_DISK 0x0004 | |
1208 | #define BIOS_CTRL_BIOS_REMOVABLE 0x0008 | |
1209 | #define BIOS_CTRL_BOOTABLE_CD 0x0010 | |
1210 | #define BIOS_CTRL_MULTIPLE_LUN 0x0040 | |
1211 | #define BIOS_CTRL_DISPLAY_MSG 0x0080 | |
1212 | #define BIOS_CTRL_NO_SCAM 0x0100 | |
1213 | #define BIOS_CTRL_RESET_SCSI_BUS 0x0200 | |
1214 | #define BIOS_CTRL_INIT_VERBOSE 0x0800 | |
1215 | #define BIOS_CTRL_SCSI_PARITY 0x1000 | |
1216 | #define BIOS_CTRL_AIPP_DIS 0x2000 | |
1217 | ||
27c868c2 | 1218 | #define ADV_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ |
1da177e4 | 1219 | |
27c868c2 | 1220 | #define ADV_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ |
1da177e4 LT |
1221 | |
1222 | /* | |
1223 | * XXX - Since ASC38C1600 Rev.3 has a local RAM failure issue, there is | |
1224 | * a special 16K Adv Library and Microcode version. After the issue is | |
1225 | * resolved, should restore 32K support. | |
1226 | * | |
1227 | * #define ADV_38C1600_MEMSIZE 0x8000L * 32 KB Internal Memory * | |
1228 | */ | |
27c868c2 | 1229 | #define ADV_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */ |
1da177e4 LT |
1230 | |
1231 | /* | |
1232 | * Byte I/O register address from base of 'iop_base'. | |
1233 | */ | |
1234 | #define IOPB_INTR_STATUS_REG 0x00 | |
1235 | #define IOPB_CHIP_ID_1 0x01 | |
1236 | #define IOPB_INTR_ENABLES 0x02 | |
1237 | #define IOPB_CHIP_TYPE_REV 0x03 | |
1238 | #define IOPB_RES_ADDR_4 0x04 | |
1239 | #define IOPB_RES_ADDR_5 0x05 | |
1240 | #define IOPB_RAM_DATA 0x06 | |
1241 | #define IOPB_RES_ADDR_7 0x07 | |
1242 | #define IOPB_FLAG_REG 0x08 | |
1243 | #define IOPB_RES_ADDR_9 0x09 | |
1244 | #define IOPB_RISC_CSR 0x0A | |
1245 | #define IOPB_RES_ADDR_B 0x0B | |
1246 | #define IOPB_RES_ADDR_C 0x0C | |
1247 | #define IOPB_RES_ADDR_D 0x0D | |
1248 | #define IOPB_SOFT_OVER_WR 0x0E | |
1249 | #define IOPB_RES_ADDR_F 0x0F | |
1250 | #define IOPB_MEM_CFG 0x10 | |
1251 | #define IOPB_RES_ADDR_11 0x11 | |
1252 | #define IOPB_GPIO_DATA 0x12 | |
1253 | #define IOPB_RES_ADDR_13 0x13 | |
1254 | #define IOPB_FLASH_PAGE 0x14 | |
1255 | #define IOPB_RES_ADDR_15 0x15 | |
1256 | #define IOPB_GPIO_CNTL 0x16 | |
1257 | #define IOPB_RES_ADDR_17 0x17 | |
1258 | #define IOPB_FLASH_DATA 0x18 | |
1259 | #define IOPB_RES_ADDR_19 0x19 | |
1260 | #define IOPB_RES_ADDR_1A 0x1A | |
1261 | #define IOPB_RES_ADDR_1B 0x1B | |
1262 | #define IOPB_RES_ADDR_1C 0x1C | |
1263 | #define IOPB_RES_ADDR_1D 0x1D | |
1264 | #define IOPB_RES_ADDR_1E 0x1E | |
1265 | #define IOPB_RES_ADDR_1F 0x1F | |
1266 | #define IOPB_DMA_CFG0 0x20 | |
1267 | #define IOPB_DMA_CFG1 0x21 | |
1268 | #define IOPB_TICKLE 0x22 | |
1269 | #define IOPB_DMA_REG_WR 0x23 | |
1270 | #define IOPB_SDMA_STATUS 0x24 | |
1271 | #define IOPB_SCSI_BYTE_CNT 0x25 | |
1272 | #define IOPB_HOST_BYTE_CNT 0x26 | |
1273 | #define IOPB_BYTE_LEFT_TO_XFER 0x27 | |
1274 | #define IOPB_BYTE_TO_XFER_0 0x28 | |
1275 | #define IOPB_BYTE_TO_XFER_1 0x29 | |
1276 | #define IOPB_BYTE_TO_XFER_2 0x2A | |
1277 | #define IOPB_BYTE_TO_XFER_3 0x2B | |
1278 | #define IOPB_ACC_GRP 0x2C | |
1279 | #define IOPB_RES_ADDR_2D 0x2D | |
1280 | #define IOPB_DEV_ID 0x2E | |
1281 | #define IOPB_RES_ADDR_2F 0x2F | |
1282 | #define IOPB_SCSI_DATA 0x30 | |
1283 | #define IOPB_RES_ADDR_31 0x31 | |
1284 | #define IOPB_RES_ADDR_32 0x32 | |
1285 | #define IOPB_SCSI_DATA_HSHK 0x33 | |
1286 | #define IOPB_SCSI_CTRL 0x34 | |
1287 | #define IOPB_RES_ADDR_35 0x35 | |
1288 | #define IOPB_RES_ADDR_36 0x36 | |
1289 | #define IOPB_RES_ADDR_37 0x37 | |
1290 | #define IOPB_RAM_BIST 0x38 | |
1291 | #define IOPB_PLL_TEST 0x39 | |
1292 | #define IOPB_PCI_INT_CFG 0x3A | |
1293 | #define IOPB_RES_ADDR_3B 0x3B | |
1294 | #define IOPB_RFIFO_CNT 0x3C | |
1295 | #define IOPB_RES_ADDR_3D 0x3D | |
1296 | #define IOPB_RES_ADDR_3E 0x3E | |
1297 | #define IOPB_RES_ADDR_3F 0x3F | |
1298 | ||
1299 | /* | |
1300 | * Word I/O register address from base of 'iop_base'. | |
1301 | */ | |
27c868c2 MW |
1302 | #define IOPW_CHIP_ID_0 0x00 /* CID0 */ |
1303 | #define IOPW_CTRL_REG 0x02 /* CC */ | |
1304 | #define IOPW_RAM_ADDR 0x04 /* LA */ | |
1305 | #define IOPW_RAM_DATA 0x06 /* LD */ | |
1da177e4 | 1306 | #define IOPW_RES_ADDR_08 0x08 |
27c868c2 MW |
1307 | #define IOPW_RISC_CSR 0x0A /* CSR */ |
1308 | #define IOPW_SCSI_CFG0 0x0C /* CFG0 */ | |
1309 | #define IOPW_SCSI_CFG1 0x0E /* CFG1 */ | |
1da177e4 | 1310 | #define IOPW_RES_ADDR_10 0x10 |
27c868c2 | 1311 | #define IOPW_SEL_MASK 0x12 /* SM */ |
1da177e4 | 1312 | #define IOPW_RES_ADDR_14 0x14 |
27c868c2 | 1313 | #define IOPW_FLASH_ADDR 0x16 /* FA */ |
1da177e4 | 1314 | #define IOPW_RES_ADDR_18 0x18 |
27c868c2 MW |
1315 | #define IOPW_EE_CMD 0x1A /* EC */ |
1316 | #define IOPW_EE_DATA 0x1C /* ED */ | |
1317 | #define IOPW_SFIFO_CNT 0x1E /* SFC */ | |
1da177e4 | 1318 | #define IOPW_RES_ADDR_20 0x20 |
27c868c2 MW |
1319 | #define IOPW_Q_BASE 0x22 /* QB */ |
1320 | #define IOPW_QP 0x24 /* QP */ | |
1321 | #define IOPW_IX 0x26 /* IX */ | |
1322 | #define IOPW_SP 0x28 /* SP */ | |
1323 | #define IOPW_PC 0x2A /* PC */ | |
1da177e4 LT |
1324 | #define IOPW_RES_ADDR_2C 0x2C |
1325 | #define IOPW_RES_ADDR_2E 0x2E | |
27c868c2 MW |
1326 | #define IOPW_SCSI_DATA 0x30 /* SD */ |
1327 | #define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */ | |
1328 | #define IOPW_SCSI_CTRL 0x34 /* SC */ | |
1329 | #define IOPW_HSHK_CFG 0x36 /* HCFG */ | |
1330 | #define IOPW_SXFR_STATUS 0x36 /* SXS */ | |
1331 | #define IOPW_SXFR_CNTL 0x38 /* SXL */ | |
1332 | #define IOPW_SXFR_CNTH 0x3A /* SXH */ | |
1da177e4 | 1333 | #define IOPW_RES_ADDR_3C 0x3C |
27c868c2 | 1334 | #define IOPW_RFIFO_DATA 0x3E /* RFD */ |
1da177e4 LT |
1335 | |
1336 | /* | |
1337 | * Doubleword I/O register address from base of 'iop_base'. | |
1338 | */ | |
1339 | #define IOPDW_RES_ADDR_0 0x00 | |
1340 | #define IOPDW_RAM_DATA 0x04 | |
1341 | #define IOPDW_RES_ADDR_8 0x08 | |
1342 | #define IOPDW_RES_ADDR_C 0x0C | |
1343 | #define IOPDW_RES_ADDR_10 0x10 | |
1344 | #define IOPDW_COMMA 0x14 | |
1345 | #define IOPDW_COMMB 0x18 | |
1346 | #define IOPDW_RES_ADDR_1C 0x1C | |
1347 | #define IOPDW_SDMA_ADDR0 0x20 | |
1348 | #define IOPDW_SDMA_ADDR1 0x24 | |
1349 | #define IOPDW_SDMA_COUNT 0x28 | |
1350 | #define IOPDW_SDMA_ERROR 0x2C | |
1351 | #define IOPDW_RDMA_ADDR0 0x30 | |
1352 | #define IOPDW_RDMA_ADDR1 0x34 | |
1353 | #define IOPDW_RDMA_COUNT 0x38 | |
1354 | #define IOPDW_RDMA_ERROR 0x3C | |
1355 | ||
1356 | #define ADV_CHIP_ID_BYTE 0x25 | |
1357 | #define ADV_CHIP_ID_WORD 0x04C1 | |
1358 | ||
1da177e4 LT |
1359 | #define ADV_INTR_ENABLE_HOST_INTR 0x01 |
1360 | #define ADV_INTR_ENABLE_SEL_INTR 0x02 | |
1361 | #define ADV_INTR_ENABLE_DPR_INTR 0x04 | |
1362 | #define ADV_INTR_ENABLE_RTA_INTR 0x08 | |
1363 | #define ADV_INTR_ENABLE_RMA_INTR 0x10 | |
1364 | #define ADV_INTR_ENABLE_RST_INTR 0x20 | |
1365 | #define ADV_INTR_ENABLE_DPE_INTR 0x40 | |
1366 | #define ADV_INTR_ENABLE_GLOBAL_INTR 0x80 | |
1367 | ||
1368 | #define ADV_INTR_STATUS_INTRA 0x01 | |
1369 | #define ADV_INTR_STATUS_INTRB 0x02 | |
1370 | #define ADV_INTR_STATUS_INTRC 0x04 | |
1371 | ||
1372 | #define ADV_RISC_CSR_STOP (0x0000) | |
1373 | #define ADV_RISC_TEST_COND (0x2000) | |
1374 | #define ADV_RISC_CSR_RUN (0x4000) | |
1375 | #define ADV_RISC_CSR_SINGLE_STEP (0x8000) | |
1376 | ||
1377 | #define ADV_CTRL_REG_HOST_INTR 0x0100 | |
1378 | #define ADV_CTRL_REG_SEL_INTR 0x0200 | |
1379 | #define ADV_CTRL_REG_DPR_INTR 0x0400 | |
1380 | #define ADV_CTRL_REG_RTA_INTR 0x0800 | |
1381 | #define ADV_CTRL_REG_RMA_INTR 0x1000 | |
1382 | #define ADV_CTRL_REG_RES_BIT14 0x2000 | |
1383 | #define ADV_CTRL_REG_DPE_INTR 0x4000 | |
1384 | #define ADV_CTRL_REG_POWER_DONE 0x8000 | |
1385 | #define ADV_CTRL_REG_ANY_INTR 0xFF00 | |
1386 | ||
1387 | #define ADV_CTRL_REG_CMD_RESET 0x00C6 | |
1388 | #define ADV_CTRL_REG_CMD_WR_IO_REG 0x00C5 | |
1389 | #define ADV_CTRL_REG_CMD_RD_IO_REG 0x00C4 | |
1390 | #define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3 | |
1391 | #define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2 | |
1392 | ||
1393 | #define ADV_TICKLE_NOP 0x00 | |
1394 | #define ADV_TICKLE_A 0x01 | |
1395 | #define ADV_TICKLE_B 0x02 | |
1396 | #define ADV_TICKLE_C 0x03 | |
1397 | ||
1da177e4 LT |
1398 | #define AdvIsIntPending(port) \ |
1399 | (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR) | |
1400 | ||
1401 | /* | |
1402 | * SCSI_CFG0 Register bit definitions | |
1403 | */ | |
27c868c2 MW |
1404 | #define TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ |
1405 | #define PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */ | |
1406 | #define EVEN_PARITY 0x1000 /* Select Even Parity */ | |
1407 | #define WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ | |
1408 | #define QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ | |
1409 | #define PRIM_MODE 0x0100 /* Primitive SCSI mode */ | |
1410 | #define SCAM_EN 0x0080 /* Enable SCAM selection */ | |
1411 | #define SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ | |
1412 | #define CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ | |
1413 | #define OUR_ID_EN 0x0010 /* Enable OUR_ID bits */ | |
1414 | #define OUR_ID 0x000F /* SCSI ID */ | |
1da177e4 LT |
1415 | |
1416 | /* | |
1417 | * SCSI_CFG1 Register bit definitions | |
1418 | */ | |
27c868c2 MW |
1419 | #define BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ |
1420 | #define TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ | |
1421 | #define SLEW_RATE 0x1000 /* SCSI output buffer slew rate */ | |
1422 | #define FILTER_SEL 0x0C00 /* Filter Period Selection */ | |
1423 | #define FLTR_DISABLE 0x0000 /* Input Filtering Disabled */ | |
1424 | #define FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */ | |
1425 | #define FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */ | |
1426 | #define ACTIVE_DBL 0x0200 /* Disable Active Negation */ | |
1427 | #define DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */ | |
1428 | #define DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ | |
1429 | #define TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ | |
1430 | #define TERM_CTL 0x0030 /* External SCSI Termination Bits */ | |
1431 | #define TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */ | |
1432 | #define TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */ | |
1433 | #define CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */ | |
1da177e4 LT |
1434 | |
1435 | /* | |
1436 | * Addendum for ASC-38C0800 Chip | |
1437 | * | |
1438 | * The ASC-38C1600 Chip uses the same definitions except that the | |
1439 | * bus mode override bits [12:10] have been moved to byte register | |
1440 | * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in | |
1441 | * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV) | |
1442 | * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only. | |
1443 | * Also each ASC-38C1600 function or channel uses only cable bits [5:4] | |
1444 | * and [1:0]. Bits [14], [7:6], [3:2] are unused. | |
1445 | */ | |
27c868c2 MW |
1446 | #define DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */ |
1447 | #define HVD_LVD_SE 0x1C00 /* Device Detect Bits */ | |
1448 | #define HVD 0x1000 /* HVD Device Detect */ | |
1449 | #define LVD 0x0800 /* LVD Device Detect */ | |
1450 | #define SE 0x0400 /* SE Device Detect */ | |
1451 | #define TERM_LVD 0x00C0 /* LVD Termination Bits */ | |
1452 | #define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */ | |
1453 | #define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */ | |
1454 | #define TERM_SE 0x0030 /* SE Termination Bits */ | |
1455 | #define TERM_SE_HI 0x0020 /* Enable SE Upper Termination */ | |
1456 | #define TERM_SE_LO 0x0010 /* Enable SE Lower Termination */ | |
1457 | #define C_DET_LVD 0x000C /* LVD Cable Detect Bits */ | |
1458 | #define C_DET3 0x0008 /* Cable Detect for LVD External Wide */ | |
1459 | #define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */ | |
1460 | #define C_DET_SE 0x0003 /* SE Cable Detect Bits */ | |
1461 | #define C_DET1 0x0002 /* Cable Detect for SE Internal Wide */ | |
1462 | #define C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */ | |
1da177e4 LT |
1463 | |
1464 | #define CABLE_ILLEGAL_A 0x7 | |
1465 | /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ | |
1466 | ||
1467 | #define CABLE_ILLEGAL_B 0xB | |
1468 | /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ | |
1469 | ||
1470 | /* | |
1471 | * MEM_CFG Register bit definitions | |
1472 | */ | |
27c868c2 MW |
1473 | #define BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */ |
1474 | #define FAST_EE_CLK 0x20 /* Diagnostic Bit */ | |
1475 | #define RAM_SZ 0x1C /* Specify size of RAM to RISC */ | |
1476 | #define RAM_SZ_2KB 0x00 /* 2 KB */ | |
1477 | #define RAM_SZ_4KB 0x04 /* 4 KB */ | |
1478 | #define RAM_SZ_8KB 0x08 /* 8 KB */ | |
1479 | #define RAM_SZ_16KB 0x0C /* 16 KB */ | |
1480 | #define RAM_SZ_32KB 0x10 /* 32 KB */ | |
1481 | #define RAM_SZ_64KB 0x14 /* 64 KB */ | |
1da177e4 LT |
1482 | |
1483 | /* | |
1484 | * DMA_CFG0 Register bit definitions | |
1485 | * | |
1486 | * This register is only accessible to the host. | |
1487 | */ | |
27c868c2 MW |
1488 | #define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */ |
1489 | #define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */ | |
1490 | #define FIFO_THRESH_16B 0x00 /* 16 bytes */ | |
1491 | #define FIFO_THRESH_32B 0x20 /* 32 bytes */ | |
1492 | #define FIFO_THRESH_48B 0x30 /* 48 bytes */ | |
1493 | #define FIFO_THRESH_64B 0x40 /* 64 bytes */ | |
1494 | #define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */ | |
1495 | #define FIFO_THRESH_96B 0x60 /* 96 bytes */ | |
1496 | #define FIFO_THRESH_112B 0x70 /* 112 bytes */ | |
1497 | #define START_CTL 0x0C /* DMA start conditions */ | |
1498 | #define START_CTL_TH 0x00 /* Wait threshold level (default) */ | |
1499 | #define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */ | |
1500 | #define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */ | |
1501 | #define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */ | |
1502 | #define READ_CMD 0x03 /* Memory Read Method */ | |
1503 | #define READ_CMD_MR 0x00 /* Memory Read */ | |
1504 | #define READ_CMD_MRL 0x02 /* Memory Read Long */ | |
1505 | #define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */ | |
1da177e4 LT |
1506 | |
1507 | /* | |
1508 | * ASC-38C0800 RAM BIST Register bit definitions | |
1509 | */ | |
1510 | #define RAM_TEST_MODE 0x80 | |
1511 | #define PRE_TEST_MODE 0x40 | |
1512 | #define NORMAL_MODE 0x00 | |
1513 | #define RAM_TEST_DONE 0x10 | |
1514 | #define RAM_TEST_STATUS 0x0F | |
1515 | #define RAM_TEST_HOST_ERROR 0x08 | |
1516 | #define RAM_TEST_INTRAM_ERROR 0x04 | |
1517 | #define RAM_TEST_RISC_ERROR 0x02 | |
1518 | #define RAM_TEST_SCSI_ERROR 0x01 | |
1519 | #define RAM_TEST_SUCCESS 0x00 | |
1520 | #define PRE_TEST_VALUE 0x05 | |
1521 | #define NORMAL_VALUE 0x00 | |
1522 | ||
1523 | /* | |
1524 | * ASC38C1600 Definitions | |
1525 | * | |
1526 | * IOPB_PCI_INT_CFG Bit Field Definitions | |
1527 | */ | |
1528 | ||
27c868c2 | 1529 | #define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */ |
1da177e4 LT |
1530 | |
1531 | /* | |
1532 | * Bit 1 can be set to change the interrupt for the Function to operate in | |
1533 | * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in | |
1534 | * Open Drain mode. Both functions of the ASC38C1600 must be set to the same | |
1535 | * mode, otherwise the operating mode is undefined. | |
1536 | */ | |
1537 | #define TOTEMPOLE 0x02 | |
1538 | ||
1539 | /* | |
1540 | * Bit 0 can be used to change the Int Pin for the Function. The value is | |
1541 | * 0 by default for both Functions with Function 0 using INT A and Function | |
1542 | * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set, | |
1543 | * INT A is used. | |
1544 | * | |
1545 | * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin | |
1546 | * value specified in the PCI Configuration Space. | |
1547 | */ | |
1548 | #define INTAB 0x01 | |
1549 | ||
1da177e4 LT |
1550 | /* |
1551 | * Adv Library Status Definitions | |
1552 | */ | |
1553 | #define ADV_TRUE 1 | |
1554 | #define ADV_FALSE 0 | |
1da177e4 LT |
1555 | #define ADV_SUCCESS 1 |
1556 | #define ADV_BUSY 0 | |
1557 | #define ADV_ERROR (-1) | |
1558 | ||
1da177e4 LT |
1559 | /* |
1560 | * ADV_DVC_VAR 'warn_code' values | |
1561 | */ | |
27c868c2 MW |
1562 | #define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ |
1563 | #define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ | |
1564 | #define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ | |
27c868c2 | 1565 | #define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */ |
1da177e4 | 1566 | |
27c868c2 MW |
1567 | #define ADV_MAX_TID 15 /* max. target identifier */ |
1568 | #define ADV_MAX_LUN 7 /* max. logical unit number */ | |
1da177e4 | 1569 | |
1da177e4 LT |
1570 | /* |
1571 | * Fixed locations of microcode operating variables. | |
1572 | */ | |
27c868c2 MW |
1573 | #define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */ |
1574 | #define ASC_MC_CODE_END_ADDR 0x002A /* microcode end address */ | |
1575 | #define ASC_MC_CODE_CHK_SUM 0x002C /* microcode code checksum */ | |
1576 | #define ASC_MC_VERSION_DATE 0x0038 /* microcode version */ | |
1577 | #define ASC_MC_VERSION_NUM 0x003A /* microcode number */ | |
1578 | #define ASC_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */ | |
1579 | #define ASC_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */ | |
1580 | #define ASC_MC_BIOS_SIGNATURE 0x0058 /* BIOS Signature 0x55AA */ | |
1581 | #define ASC_MC_BIOS_VERSION 0x005A /* BIOS Version (2 bytes) */ | |
1582 | #define ASC_MC_SDTR_SPEED1 0x0090 /* SDTR Speed for TID 0-3 */ | |
1583 | #define ASC_MC_SDTR_SPEED2 0x0092 /* SDTR Speed for TID 4-7 */ | |
1584 | #define ASC_MC_SDTR_SPEED3 0x0094 /* SDTR Speed for TID 8-11 */ | |
1585 | #define ASC_MC_SDTR_SPEED4 0x0096 /* SDTR Speed for TID 12-15 */ | |
1da177e4 LT |
1586 | #define ASC_MC_CHIP_TYPE 0x009A |
1587 | #define ASC_MC_INTRB_CODE 0x009B | |
1588 | #define ASC_MC_WDTR_ABLE 0x009C | |
1589 | #define ASC_MC_SDTR_ABLE 0x009E | |
1590 | #define ASC_MC_TAGQNG_ABLE 0x00A0 | |
1591 | #define ASC_MC_DISC_ENABLE 0x00A2 | |
1592 | #define ASC_MC_IDLE_CMD_STATUS 0x00A4 | |
1593 | #define ASC_MC_IDLE_CMD 0x00A6 | |
1594 | #define ASC_MC_IDLE_CMD_PARAMETER 0x00A8 | |
1595 | #define ASC_MC_DEFAULT_SCSI_CFG0 0x00AC | |
1596 | #define ASC_MC_DEFAULT_SCSI_CFG1 0x00AE | |
1597 | #define ASC_MC_DEFAULT_MEM_CFG 0x00B0 | |
1598 | #define ASC_MC_DEFAULT_SEL_MASK 0x00B2 | |
1599 | #define ASC_MC_SDTR_DONE 0x00B6 | |
1600 | #define ASC_MC_NUMBER_OF_QUEUED_CMD 0x00C0 | |
1601 | #define ASC_MC_NUMBER_OF_MAX_CMD 0x00D0 | |
1602 | #define ASC_MC_DEVICE_HSHK_CFG_TABLE 0x0100 | |
27c868c2 | 1603 | #define ASC_MC_CONTROL_FLAG 0x0122 /* Microcode control flag. */ |
1da177e4 | 1604 | #define ASC_MC_WDTR_DONE 0x0124 |
27c868c2 | 1605 | #define ASC_MC_CAM_MODE_MASK 0x015E /* CAM mode TID bitmask. */ |
1da177e4 LT |
1606 | #define ASC_MC_ICQ 0x0160 |
1607 | #define ASC_MC_IRQ 0x0164 | |
1608 | #define ASC_MC_PPR_ABLE 0x017A | |
1609 | ||
1610 | /* | |
1611 | * BIOS LRAM variable absolute offsets. | |
1612 | */ | |
1613 | #define BIOS_CODESEG 0x54 | |
1614 | #define BIOS_CODELEN 0x56 | |
1615 | #define BIOS_SIGNATURE 0x58 | |
1616 | #define BIOS_VERSION 0x5A | |
1617 | ||
1618 | /* | |
1619 | * Microcode Control Flags | |
1620 | * | |
1621 | * Flags set by the Adv Library in RISC variable 'control_flag' (0x122) | |
1622 | * and handled by the microcode. | |
1623 | */ | |
27c868c2 MW |
1624 | #define CONTROL_FLAG_IGNORE_PERR 0x0001 /* Ignore DMA Parity Errors */ |
1625 | #define CONTROL_FLAG_ENABLE_AIPP 0x0002 /* Enabled AIPP checking. */ | |
1da177e4 LT |
1626 | |
1627 | /* | |
1628 | * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format | |
1629 | */ | |
1630 | #define HSHK_CFG_WIDE_XFR 0x8000 | |
1631 | #define HSHK_CFG_RATE 0x0F00 | |
1632 | #define HSHK_CFG_OFFSET 0x001F | |
1633 | ||
27c868c2 MW |
1634 | #define ASC_DEF_MAX_HOST_QNG 0xFD /* Max. number of host commands (253) */ |
1635 | #define ASC_DEF_MIN_HOST_QNG 0x10 /* Min. number of host commands (16) */ | |
1636 | #define ASC_DEF_MAX_DVC_QNG 0x3F /* Max. number commands per device (63) */ | |
1637 | #define ASC_DEF_MIN_DVC_QNG 0x04 /* Min. number commands per device (4) */ | |
1638 | ||
1639 | #define ASC_QC_DATA_CHECK 0x01 /* Require ASC_QC_DATA_OUT set or clear. */ | |
1640 | #define ASC_QC_DATA_OUT 0x02 /* Data out DMA transfer. */ | |
1641 | #define ASC_QC_START_MOTOR 0x04 /* Send auto-start motor before request. */ | |
1642 | #define ASC_QC_NO_OVERRUN 0x08 /* Don't report overrun. */ | |
1643 | #define ASC_QC_FREEZE_TIDQ 0x10 /* Freeze TID queue after request. XXX TBD */ | |
1644 | ||
1645 | #define ASC_QSC_NO_DISC 0x01 /* Don't allow disconnect for request. */ | |
1646 | #define ASC_QSC_NO_TAGMSG 0x02 /* Don't allow tag queuing for request. */ | |
1647 | #define ASC_QSC_NO_SYNC 0x04 /* Don't use Synch. transfer on request. */ | |
1648 | #define ASC_QSC_NO_WIDE 0x08 /* Don't use Wide transfer on request. */ | |
1649 | #define ASC_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR before request. */ | |
1da177e4 LT |
1650 | /* |
1651 | * Note: If a Tag Message is to be sent and neither ASC_QSC_HEAD_TAG or | |
1652 | * ASC_QSC_ORDERED_TAG is set, then a Simple Tag Message (0x20) is used. | |
1653 | */ | |
27c868c2 MW |
1654 | #define ASC_QSC_HEAD_TAG 0x40 /* Use Head Tag Message (0x21). */ |
1655 | #define ASC_QSC_ORDERED_TAG 0x80 /* Use Ordered Tag Message (0x22). */ | |
1da177e4 LT |
1656 | |
1657 | /* | |
1658 | * All fields here are accessed by the board microcode and need to be | |
1659 | * little-endian. | |
1660 | */ | |
27c868c2 | 1661 | typedef struct adv_carr_t { |
98b96a7d HR |
1662 | __le32 carr_va; /* Carrier Virtual Address */ |
1663 | __le32 carr_pa; /* Carrier Physical Address */ | |
9fef6ba4 | 1664 | __le32 areq_vpa; /* ADV_SCSI_REQ_Q Virtual or Physical Address */ |
27c868c2 MW |
1665 | /* |
1666 | * next_vpa [31:4] Carrier Virtual or Physical Next Pointer | |
1667 | * | |
1668 | * next_vpa [3:1] Reserved Bits | |
1669 | * next_vpa [0] Done Flag set in Response Queue. | |
1670 | */ | |
98b96a7d | 1671 | __le32 next_vpa; |
1da177e4 LT |
1672 | } ADV_CARR_T; |
1673 | ||
1674 | /* | |
1675 | * Mask used to eliminate low 4 bits of carrier 'next_vpa' field. | |
1676 | */ | |
084e6c36 | 1677 | #define ADV_NEXT_VPA_MASK 0xFFFFFFF0 |
1da177e4 | 1678 | |
084e6c36 HR |
1679 | #define ADV_RQ_DONE 0x00000001 |
1680 | #define ADV_RQ_GOOD 0x00000002 | |
1681 | #define ADV_CQ_STOPPER 0x00000000 | |
1da177e4 | 1682 | |
084e6c36 | 1683 | #define ADV_GET_CARRP(carrp) ((carrp) & ADV_NEXT_VPA_MASK) |
1da177e4 | 1684 | |
98b96a7d HR |
1685 | /* |
1686 | * Each carrier is 64 bytes, and we need three additional | |
1687 | * carrier for icq, irq, and the termination carrier. | |
1688 | */ | |
1689 | #define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 3) | |
1da177e4 LT |
1690 | |
1691 | #define ADV_CARRIER_BUFSIZE \ | |
98b96a7d | 1692 | (ADV_CARRIER_COUNT * sizeof(ADV_CARR_T)) |
1da177e4 | 1693 | |
27c868c2 MW |
1694 | #define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */ |
1695 | #define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */ | |
1696 | #define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */ | |
1da177e4 LT |
1697 | |
1698 | /* | |
1699 | * Adapter temporary configuration structure | |
1700 | * | |
1701 | * This structure can be discarded after initialization. Don't add | |
1702 | * fields here needed after initialization. | |
1703 | * | |
1704 | * Field naming convention: | |
1705 | * | |
1706 | * *_enable indicates the field enables or disables a feature. The | |
1707 | * value of the field is never reset. | |
1708 | */ | |
1709 | typedef struct adv_dvc_cfg { | |
27c868c2 MW |
1710 | ushort disc_enable; /* enable disconnection */ |
1711 | uchar chip_version; /* chip version */ | |
1712 | uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */ | |
27c868c2 MW |
1713 | ushort control_flag; /* Microcode Control Flag */ |
1714 | ushort mcode_date; /* Microcode date */ | |
1715 | ushort mcode_version; /* Microcode version */ | |
27c868c2 MW |
1716 | ushort serial1; /* EEPROM serial number word 1 */ |
1717 | ushort serial2; /* EEPROM serial number word 2 */ | |
1718 | ushort serial3; /* EEPROM serial number word 3 */ | |
1da177e4 LT |
1719 | } ADV_DVC_CFG; |
1720 | ||
1721 | struct adv_dvc_var; | |
1722 | struct adv_scsi_req_q; | |
1723 | ||
0ce53822 | 1724 | typedef struct adv_sg_block { |
27c868c2 MW |
1725 | uchar reserved1; |
1726 | uchar reserved2; | |
1727 | uchar reserved3; | |
1728 | uchar sg_cnt; /* Valid entries in block. */ | |
0ce53822 | 1729 | __le32 sg_ptr; /* Pointer to next sg block. */ |
27c868c2 | 1730 | struct { |
0ce53822 HR |
1731 | __le32 sg_addr; /* SG element address. */ |
1732 | __le32 sg_count; /* SG element count. */ | |
27c868c2 | 1733 | } sg_list[NO_OF_SG_PER_BLOCK]; |
1da177e4 LT |
1734 | } ADV_SG_BLOCK; |
1735 | ||
1736 | /* | |
1737 | * ADV_SCSI_REQ_Q - microcode request structure | |
1738 | * | |
1739 | * All fields in this structure up to byte 60 are used by the microcode. | |
1740 | * The microcode makes assumptions about the size and ordering of fields | |
1741 | * in this structure. Do not change the structure definition here without | |
1742 | * coordinating the change with the microcode. | |
1743 | * | |
1744 | * All fields accessed by microcode must be maintained in little_endian | |
1745 | * order. | |
1746 | */ | |
1747 | typedef struct adv_scsi_req_q { | |
27c868c2 MW |
1748 | uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */ |
1749 | uchar target_cmd; | |
1750 | uchar target_id; /* Device target identifier. */ | |
1751 | uchar target_lun; /* Device target logical unit number. */ | |
95cfab6c HR |
1752 | __le32 data_addr; /* Data buffer physical address. */ |
1753 | __le32 data_cnt; /* Data count. Ucode sets to residual. */ | |
811ddc05 | 1754 | __le32 sense_addr; |
98b96a7d | 1755 | __le32 carr_pa; |
27c868c2 MW |
1756 | uchar mflag; |
1757 | uchar sense_len; | |
1758 | uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */ | |
1759 | uchar scsi_cntl; | |
1760 | uchar done_status; /* Completion status. */ | |
1761 | uchar scsi_status; /* SCSI status byte. */ | |
1762 | uchar host_status; /* Ucode host status. */ | |
1763 | uchar sg_working_ix; | |
1764 | uchar cdb[12]; /* SCSI CDB bytes 0-11. */ | |
95cfab6c | 1765 | __le32 sg_real_addr; /* SG list physical address. */ |
98b96a7d | 1766 | __le32 scsiq_rptr; |
27c868c2 | 1767 | uchar cdb16[4]; /* SCSI CDB bytes 12-15. */ |
98b96a7d HR |
1768 | __le32 scsiq_ptr; |
1769 | __le32 carr_va; | |
27c868c2 MW |
1770 | /* |
1771 | * End of microcode structure - 60 bytes. The rest of the structure | |
1772 | * is used by the Adv Library and ignored by the microcode. | |
1773 | */ | |
9c17c62a | 1774 | u32 srb_tag; |
98b96a7d | 1775 | ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */ |
1da177e4 LT |
1776 | } ADV_SCSI_REQ_Q; |
1777 | ||
98d41c29 MW |
1778 | /* |
1779 | * The following two structures are used to process Wide Board requests. | |
1780 | * | |
1781 | * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library | |
9c17c62a HR |
1782 | * and microcode with the ADV_SCSI_REQ_Q field 'srb_tag' set to the |
1783 | * SCSI request tag. The adv_req_t structure 'cmndp' field in turn points | |
1784 | * to the Mid-Level SCSI request structure. | |
98d41c29 MW |
1785 | * |
1786 | * Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each | |
1787 | * ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux | |
1788 | * up to 255 scatter-gather elements may be used per request or | |
1789 | * ADV_SCSI_REQ_Q. | |
1790 | * | |
1791 | * Both structures must be 32 byte aligned. | |
1792 | */ | |
1793 | typedef struct adv_sgblk { | |
1794 | ADV_SG_BLOCK sg_block; /* Sgblock structure. */ | |
0ce53822 | 1795 | dma_addr_t sg_addr; /* Physical address */ |
98d41c29 MW |
1796 | struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */ |
1797 | } adv_sgblk_t; | |
1798 | ||
1799 | typedef struct adv_req { | |
1800 | ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */ | |
4b47e464 | 1801 | uchar align[24]; /* Request structure padding. */ |
98d41c29 | 1802 | struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */ |
4b47e464 | 1803 | dma_addr_t req_addr; |
98d41c29 | 1804 | adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */ |
4b47e464 | 1805 | } adv_req_t __aligned(32); |
98d41c29 MW |
1806 | |
1807 | /* | |
1808 | * Adapter operation variable structure. | |
1809 | * | |
1810 | * One structure is required per host adapter. | |
1811 | * | |
1812 | * Field naming convention: | |
1813 | * | |
1814 | * *_able indicates both whether a feature should be enabled or disabled | |
1815 | * and whether a device isi capable of the feature. At initialization | |
1816 | * this field may be set, but later if a device is found to be incapable | |
1817 | * of the feature, the field is cleared. | |
1818 | */ | |
1819 | typedef struct adv_dvc_var { | |
1820 | AdvPortAddr iop_base; /* I/O port address */ | |
1821 | ushort err_code; /* fatal error code */ | |
1822 | ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */ | |
1823 | ushort wdtr_able; /* try WDTR for a device */ | |
1824 | ushort sdtr_able; /* try SDTR for a device */ | |
1825 | ushort ultra_able; /* try SDTR Ultra speed for a device */ | |
1826 | ushort sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */ | |
1827 | ushort sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */ | |
1828 | ushort sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */ | |
1829 | ushort sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */ | |
1830 | ushort tagqng_able; /* try tagged queuing with a device */ | |
1831 | ushort ppr_able; /* PPR message capable per TID bitmask. */ | |
1832 | uchar max_dvc_qng; /* maximum number of tagged commands per device */ | |
1833 | ushort start_motor; /* start motor command allowed */ | |
1834 | uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */ | |
1835 | uchar chip_no; /* should be assigned by caller */ | |
1836 | uchar max_host_qng; /* maximum number of Q'ed command allowed */ | |
1837 | ushort no_scam; /* scam_tolerant of EEPROM */ | |
1838 | struct asc_board *drv_ptr; /* driver pointer to private structure */ | |
1839 | uchar chip_scsi_id; /* chip SCSI target ID */ | |
1840 | uchar chip_type; | |
1841 | uchar bist_err_code; | |
98b96a7d | 1842 | ADV_CARR_T *carrier; |
98d41c29 | 1843 | ADV_CARR_T *carr_freelist; /* Carrier free list. */ |
98b96a7d | 1844 | dma_addr_t carrier_addr; |
98d41c29 MW |
1845 | ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */ |
1846 | ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */ | |
1847 | ushort carr_pending_cnt; /* Count of pending carriers. */ | |
98d41c29 MW |
1848 | /* |
1849 | * Note: The following fields will not be used after initialization. The | |
1850 | * driver may discard the buffer after initialization is done. | |
1851 | */ | |
1852 | ADV_DVC_CFG *cfg; /* temporary configuration structure */ | |
1853 | } ADV_DVC_VAR; | |
1854 | ||
1da177e4 LT |
1855 | /* |
1856 | * Microcode idle loop commands | |
1857 | */ | |
1858 | #define IDLE_CMD_COMPLETED 0 | |
1859 | #define IDLE_CMD_STOP_CHIP 0x0001 | |
1860 | #define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002 | |
1861 | #define IDLE_CMD_SEND_INT 0x0004 | |
1862 | #define IDLE_CMD_ABORT 0x0008 | |
1863 | #define IDLE_CMD_DEVICE_RESET 0x0010 | |
27c868c2 MW |
1864 | #define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */ |
1865 | #define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */ | |
1da177e4 LT |
1866 | #define IDLE_CMD_SCSIREQ 0x0080 |
1867 | ||
1868 | #define IDLE_CMD_STATUS_SUCCESS 0x0001 | |
1869 | #define IDLE_CMD_STATUS_FAILURE 0x0002 | |
1870 | ||
1871 | /* | |
1872 | * AdvSendIdleCmd() flag definitions. | |
1873 | */ | |
1874 | #define ADV_NOWAIT 0x01 | |
1875 | ||
1876 | /* | |
1877 | * Wait loop time out values. | |
1878 | */ | |
27c868c2 MW |
1879 | #define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ |
1880 | #define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ | |
27c868c2 | 1881 | #define SCSI_MAX_RETRY 10 /* retry count */ |
1da177e4 | 1882 | |
27c868c2 MW |
1883 | #define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ |
1884 | #define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */ | |
1885 | #define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */ | |
1886 | #define ADV_RDMA_IN_CARR_AND_Q_INVALID 0x04 /* RDMAed-in data invalid. */ | |
1da177e4 | 1887 | |
27c868c2 | 1888 | #define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */ |
1da177e4 | 1889 | |
1da177e4 LT |
1890 | /* Read byte from a register. */ |
1891 | #define AdvReadByteRegister(iop_base, reg_off) \ | |
1892 | (ADV_MEM_READB((iop_base) + (reg_off))) | |
1893 | ||
1894 | /* Write byte to a register. */ | |
1895 | #define AdvWriteByteRegister(iop_base, reg_off, byte) \ | |
1896 | (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte))) | |
1897 | ||
1898 | /* Read word (2 bytes) from a register. */ | |
1899 | #define AdvReadWordRegister(iop_base, reg_off) \ | |
1900 | (ADV_MEM_READW((iop_base) + (reg_off))) | |
1901 | ||
1902 | /* Write word (2 bytes) to a register. */ | |
1903 | #define AdvWriteWordRegister(iop_base, reg_off, word) \ | |
1904 | (ADV_MEM_WRITEW((iop_base) + (reg_off), (word))) | |
1905 | ||
1906 | /* Write dword (4 bytes) to a register. */ | |
1907 | #define AdvWriteDWordRegister(iop_base, reg_off, dword) \ | |
1908 | (ADV_MEM_WRITEDW((iop_base) + (reg_off), (dword))) | |
1909 | ||
1910 | /* Read byte from LRAM. */ | |
1911 | #define AdvReadByteLram(iop_base, addr, byte) \ | |
1912 | do { \ | |
1913 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ | |
1914 | (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA); \ | |
1915 | } while (0) | |
1916 | ||
1917 | /* Write byte to LRAM. */ | |
1918 | #define AdvWriteByteLram(iop_base, addr, byte) \ | |
1919 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ | |
1920 | ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte))) | |
1921 | ||
1922 | /* Read word (2 bytes) from LRAM. */ | |
1923 | #define AdvReadWordLram(iop_base, addr, word) \ | |
1924 | do { \ | |
1925 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ | |
1926 | (word) = (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)); \ | |
1927 | } while (0) | |
1928 | ||
1929 | /* Write word (2 bytes) to LRAM. */ | |
1930 | #define AdvWriteWordLram(iop_base, addr, word) \ | |
1931 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ | |
1932 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) | |
1933 | ||
1934 | /* Write little-endian double word (4 bytes) to LRAM */ | |
1935 | /* Because of unspecified C language ordering don't use auto-increment. */ | |
1936 | #define AdvWriteDWordLramNoSwap(iop_base, addr, dword) \ | |
1937 | ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ | |
1938 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ | |
1939 | cpu_to_le16((ushort) ((dword) & 0xFFFF)))), \ | |
1940 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2), \ | |
1941 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ | |
1942 | cpu_to_le16((ushort) ((dword >> 16) & 0xFFFF))))) | |
1943 | ||
1944 | /* Read word (2 bytes) from LRAM assuming that the address is already set. */ | |
1945 | #define AdvReadWordAutoIncLram(iop_base) \ | |
1946 | (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)) | |
1947 | ||
1948 | /* Write word (2 bytes) to LRAM assuming that the address is already set. */ | |
1949 | #define AdvWriteWordAutoIncLram(iop_base, word) \ | |
1950 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) | |
1951 | ||
1da177e4 LT |
1952 | /* |
1953 | * Define macro to check for Condor signature. | |
1954 | * | |
1955 | * Evaluate to ADV_TRUE if a Condor chip is found the specified port | |
1956 | * address 'iop_base'. Otherwise evalue to ADV_FALSE. | |
1957 | */ | |
1958 | #define AdvFindSignature(iop_base) \ | |
1959 | (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1) == \ | |
1960 | ADV_CHIP_ID_BYTE) && \ | |
1961 | (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0) == \ | |
1962 | ADV_CHIP_ID_WORD)) ? ADV_TRUE : ADV_FALSE) | |
1963 | ||
1964 | /* | |
1965 | * Define macro to Return the version number of the chip at 'iop_base'. | |
1966 | * | |
1967 | * The second parameter 'bus_type' is currently unused. | |
1968 | */ | |
1969 | #define AdvGetChipVersion(iop_base, bus_type) \ | |
1970 | AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV) | |
1971 | ||
1972 | /* | |
9c17c62a | 1973 | * Abort an SRB in the chip's RISC Memory. The 'srb_tag' argument must |
9fef6ba4 | 1974 | * match the ADV_SCSI_REQ_Q 'srb_tag' field. |
1da177e4 LT |
1975 | * |
1976 | * If the request has not yet been sent to the device it will simply be | |
1977 | * aborted from RISC memory. If the request is disconnected it will be | |
1978 | * aborted on reselection by sending an Abort Message to the target ID. | |
1979 | * | |
1980 | * Return value: | |
1981 | * ADV_TRUE(1) - Queue was successfully aborted. | |
1982 | * ADV_FALSE(0) - Queue was not found on the active queue list. | |
1983 | */ | |
9c17c62a HR |
1984 | #define AdvAbortQueue(asc_dvc, srb_tag) \ |
1985 | AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \ | |
1986 | (ADV_DCNT) (srb_tag)) | |
1da177e4 LT |
1987 | |
1988 | /* | |
1989 | * Send a Bus Device Reset Message to the specified target ID. | |
1990 | * | |
1991 | * All outstanding commands will be purged if sending the | |
1992 | * Bus Device Reset Message is successful. | |
1993 | * | |
1994 | * Return Value: | |
1995 | * ADV_TRUE(1) - All requests on the target are purged. | |
1996 | * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests | |
1997 | * are not purged. | |
1998 | */ | |
1999 | #define AdvResetDevice(asc_dvc, target_id) \ | |
9c17c62a HR |
2000 | AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \ |
2001 | (ADV_DCNT) (target_id)) | |
1da177e4 LT |
2002 | |
2003 | /* | |
2004 | * SCSI Wide Type definition. | |
2005 | */ | |
2006 | #define ADV_SCSI_BIT_ID_TYPE ushort | |
2007 | ||
2008 | /* | |
2009 | * AdvInitScsiTarget() 'cntl_flag' options. | |
2010 | */ | |
2011 | #define ADV_SCAN_LUN 0x01 | |
2012 | #define ADV_CAPINFO_NOLUN 0x02 | |
2013 | ||
2014 | /* | |
2015 | * Convert target id to target id bit mask. | |
2016 | */ | |
2017 | #define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID)) | |
2018 | ||
2019 | /* | |
9fef6ba4 | 2020 | * ADV_SCSI_REQ_Q 'done_status' and 'host_status' return values. |
1da177e4 LT |
2021 | */ |
2022 | ||
27c868c2 | 2023 | #define QD_NO_STATUS 0x00 /* Request not completed yet. */ |
1da177e4 LT |
2024 | #define QD_NO_ERROR 0x01 |
2025 | #define QD_ABORTED_BY_HOST 0x02 | |
2026 | #define QD_WITH_ERROR 0x04 | |
2027 | ||
2028 | #define QHSTA_NO_ERROR 0x00 | |
2029 | #define QHSTA_M_SEL_TIMEOUT 0x11 | |
2030 | #define QHSTA_M_DATA_OVER_RUN 0x12 | |
2031 | #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 | |
2032 | #define QHSTA_M_QUEUE_ABORTED 0x15 | |
27c868c2 MW |
2033 | #define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */ |
2034 | #define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ | |
2035 | #define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */ | |
2036 | #define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */ | |
2037 | #define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */ | |
2038 | #define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */ | |
2039 | #define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */ | |
1da177e4 | 2040 | /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ |
27c868c2 MW |
2041 | #define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */ |
2042 | #define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */ | |
2043 | #define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */ | |
2044 | #define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */ | |
2045 | #define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */ | |
2046 | #define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */ | |
2047 | #define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */ | |
2048 | #define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */ | |
1da177e4 LT |
2049 | #define QHSTA_M_WTM_TIMEOUT 0x41 |
2050 | #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 | |
2051 | #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 | |
2052 | #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 | |
27c868c2 MW |
2053 | #define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */ |
2054 | #define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */ | |
2055 | #define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */ | |
1da177e4 | 2056 | |
1da177e4 | 2057 | /* Return the address that is aligned at the next doubleword >= to 'addr'. */ |
1da177e4 LT |
2058 | #define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F) |
2059 | ||
2060 | /* | |
2061 | * Total contiguous memory needed for driver SG blocks. | |
2062 | * | |
2063 | * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum | |
2064 | * number of scatter-gather elements the driver supports in a | |
2065 | * single request. | |
2066 | */ | |
2067 | ||
2068 | #define ADV_SG_LIST_MAX_BYTE_SIZE \ | |
2069 | (sizeof(ADV_SG_BLOCK) * \ | |
2070 | ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)) | |
2071 | ||
d2411495 | 2072 | /* struct asc_board flags */ |
27c868c2 | 2073 | #define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */ |
1da177e4 LT |
2074 | |
2075 | #define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0) | |
1da177e4 | 2076 | |
27c868c2 | 2077 | #define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */ |
1da177e4 | 2078 | |
27c868c2 | 2079 | #define ASC_INFO_SIZE 128 /* advansys_info() line size */ |
1da177e4 | 2080 | |
1da177e4 LT |
2081 | /* Asc Library return codes */ |
2082 | #define ASC_TRUE 1 | |
2083 | #define ASC_FALSE 0 | |
2084 | #define ASC_NOERROR 1 | |
2085 | #define ASC_BUSY 0 | |
2086 | #define ASC_ERROR (-1) | |
2087 | ||
2088 | /* struct scsi_cmnd function return codes */ | |
2089 | #define STATUS_BYTE(byte) (byte) | |
2090 | #define MSG_BYTE(byte) ((byte) << 8) | |
2091 | #define HOST_BYTE(byte) ((byte) << 16) | |
2092 | #define DRIVER_BYTE(byte) ((byte) << 24) | |
2093 | ||
d2411495 | 2094 | #define ASC_STATS(shost, counter) ASC_STATS_ADD(shost, counter, 1) |
1da177e4 | 2095 | #ifndef ADVANSYS_STATS |
27c868c2 | 2096 | #define ASC_STATS_ADD(shost, counter, count) |
1da177e4 | 2097 | #else /* ADVANSYS_STATS */ |
27c868c2 | 2098 | #define ASC_STATS_ADD(shost, counter, count) \ |
d2411495 | 2099 | (((struct asc_board *) shost_priv(shost))->asc_stats.counter += (count)) |
1da177e4 LT |
2100 | #endif /* ADVANSYS_STATS */ |
2101 | ||
1da177e4 LT |
2102 | /* If the result wraps when calculating tenths, return 0. */ |
2103 | #define ASC_TENTHS(num, den) \ | |
2104 | (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ | |
2105 | 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) | |
2106 | ||
2107 | /* | |
2108 | * Display a message to the console. | |
2109 | */ | |
2110 | #define ASC_PRINT(s) \ | |
2111 | { \ | |
2112 | printk("advansys: "); \ | |
2113 | printk(s); \ | |
2114 | } | |
2115 | ||
2116 | #define ASC_PRINT1(s, a1) \ | |
2117 | { \ | |
2118 | printk("advansys: "); \ | |
2119 | printk((s), (a1)); \ | |
2120 | } | |
2121 | ||
2122 | #define ASC_PRINT2(s, a1, a2) \ | |
2123 | { \ | |
2124 | printk("advansys: "); \ | |
2125 | printk((s), (a1), (a2)); \ | |
2126 | } | |
2127 | ||
2128 | #define ASC_PRINT3(s, a1, a2, a3) \ | |
2129 | { \ | |
2130 | printk("advansys: "); \ | |
2131 | printk((s), (a1), (a2), (a3)); \ | |
2132 | } | |
2133 | ||
2134 | #define ASC_PRINT4(s, a1, a2, a3, a4) \ | |
2135 | { \ | |
2136 | printk("advansys: "); \ | |
2137 | printk((s), (a1), (a2), (a3), (a4)); \ | |
2138 | } | |
2139 | ||
1da177e4 LT |
2140 | #ifndef ADVANSYS_DEBUG |
2141 | ||
b352f923 | 2142 | #define ASC_DBG(lvl, s...) |
1da177e4 | 2143 | #define ASC_DBG_PRT_SCSI_HOST(lvl, s) |
1da177e4 LT |
2144 | #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) |
2145 | #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) | |
2146 | #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) | |
2147 | #define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) | |
2148 | #define ASC_DBG_PRT_HEX(lvl, name, start, length) | |
2149 | #define ASC_DBG_PRT_CDB(lvl, cdb, len) | |
2150 | #define ASC_DBG_PRT_SENSE(lvl, sense, len) | |
2151 | #define ASC_DBG_PRT_INQUIRY(lvl, inq, len) | |
2152 | ||
2153 | #else /* ADVANSYS_DEBUG */ | |
2154 | ||
2155 | /* | |
2156 | * Debugging Message Levels: | |
2157 | * 0: Errors Only | |
2158 | * 1: High-Level Tracing | |
2159 | * 2-N: Verbose Tracing | |
2160 | */ | |
2161 | ||
b352f923 MW |
2162 | #define ASC_DBG(lvl, format, arg...) { \ |
2163 | if (asc_dbglvl >= (lvl)) \ | |
2164 | printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \ | |
cadbd4a5 | 2165 | __func__ , ## arg); \ |
b352f923 | 2166 | } |
1da177e4 LT |
2167 | |
2168 | #define ASC_DBG_PRT_SCSI_HOST(lvl, s) \ | |
2169 | { \ | |
2170 | if (asc_dbglvl >= (lvl)) { \ | |
2171 | asc_prt_scsi_host(s); \ | |
2172 | } \ | |
2173 | } | |
2174 | ||
1da177e4 LT |
2175 | #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \ |
2176 | { \ | |
2177 | if (asc_dbglvl >= (lvl)) { \ | |
2178 | asc_prt_asc_scsi_q(scsiqp); \ | |
2179 | } \ | |
2180 | } | |
2181 | ||
2182 | #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \ | |
2183 | { \ | |
2184 | if (asc_dbglvl >= (lvl)) { \ | |
2185 | asc_prt_asc_qdone_info(qdone); \ | |
2186 | } \ | |
2187 | } | |
2188 | ||
2189 | #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \ | |
2190 | { \ | |
2191 | if (asc_dbglvl >= (lvl)) { \ | |
2192 | asc_prt_adv_scsi_req_q(scsiqp); \ | |
2193 | } \ | |
2194 | } | |
2195 | ||
2196 | #define ASC_DBG_PRT_HEX(lvl, name, start, length) \ | |
2197 | { \ | |
2198 | if (asc_dbglvl >= (lvl)) { \ | |
2199 | asc_prt_hex((name), (start), (length)); \ | |
2200 | } \ | |
2201 | } | |
2202 | ||
2203 | #define ASC_DBG_PRT_CDB(lvl, cdb, len) \ | |
2204 | ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len)); | |
2205 | ||
2206 | #define ASC_DBG_PRT_SENSE(lvl, sense, len) \ | |
2207 | ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len)); | |
2208 | ||
2209 | #define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \ | |
2210 | ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len)); | |
2211 | #endif /* ADVANSYS_DEBUG */ | |
2212 | ||
1da177e4 LT |
2213 | #ifdef ADVANSYS_STATS |
2214 | ||
2215 | /* Per board statistics structure */ | |
2216 | struct asc_stats { | |
27c868c2 | 2217 | /* Driver Entrypoint Statistics */ |
95cfab6c HR |
2218 | unsigned int queuecommand; /* # calls to advansys_queuecommand() */ |
2219 | unsigned int reset; /* # calls to advansys_eh_bus_reset() */ | |
2220 | unsigned int biosparam; /* # calls to advansys_biosparam() */ | |
2221 | unsigned int interrupt; /* # advansys_interrupt() calls */ | |
2222 | unsigned int callback; /* # calls to asc/adv_isr_callback() */ | |
2223 | unsigned int done; /* # calls to request's scsi_done function */ | |
2224 | unsigned int build_error; /* # asc/adv_build_req() ASC_ERROR returns. */ | |
2225 | unsigned int adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */ | |
2226 | unsigned int adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */ | |
27c868c2 | 2227 | /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */ |
95cfab6c HR |
2228 | unsigned int exe_noerror; /* # ASC_NOERROR returns. */ |
2229 | unsigned int exe_busy; /* # ASC_BUSY returns. */ | |
2230 | unsigned int exe_error; /* # ASC_ERROR returns. */ | |
2231 | unsigned int exe_unknown; /* # unknown returns. */ | |
27c868c2 | 2232 | /* Data Transfer Statistics */ |
95cfab6c HR |
2233 | unsigned int xfer_cnt; /* # I/O requests received */ |
2234 | unsigned int xfer_elem; /* # scatter-gather elements */ | |
2235 | unsigned int xfer_sect; /* # 512-byte blocks */ | |
1da177e4 LT |
2236 | }; |
2237 | #endif /* ADVANSYS_STATS */ | |
2238 | ||
1da177e4 LT |
2239 | /* |
2240 | * Structure allocated for each board. | |
2241 | * | |
8dfb5379 | 2242 | * This structure is allocated by scsi_host_alloc() at the end |
1da177e4 LT |
2243 | * of the 'Scsi_Host' structure starting at the 'hostdata' |
2244 | * field. It is guaranteed to be allocated from DMA-able memory. | |
2245 | */ | |
d2411495 | 2246 | struct asc_board { |
394dbf3f | 2247 | struct device *dev; |
9c17c62a | 2248 | struct Scsi_Host *shost; |
27c868c2 | 2249 | uint flags; /* Board flags */ |
d361db48 | 2250 | unsigned int irq; |
27c868c2 MW |
2251 | union { |
2252 | ASC_DVC_VAR asc_dvc_var; /* Narrow board */ | |
2253 | ADV_DVC_VAR adv_dvc_var; /* Wide board */ | |
2254 | } dvc_var; | |
2255 | union { | |
2256 | ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */ | |
2257 | ADV_DVC_CFG adv_dvc_cfg; /* Wide board */ | |
2258 | } dvc_cfg; | |
2259 | ushort asc_n_io_port; /* Number I/O ports. */ | |
27c868c2 | 2260 | ADV_SCSI_BIT_ID_TYPE init_tidmask; /* Target init./valid mask */ |
27c868c2 MW |
2261 | ushort reqcnt[ADV_MAX_TID + 1]; /* Starvation request count */ |
2262 | ADV_SCSI_BIT_ID_TYPE queue_full; /* Queue full mask */ | |
2263 | ushort queue_full_cnt[ADV_MAX_TID + 1]; /* Queue full count */ | |
2264 | union { | |
2265 | ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */ | |
2266 | ADVEEP_3550_CONFIG adv_3550_eep; /* 3550 EEPROM config. */ | |
2267 | ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */ | |
2268 | ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */ | |
2269 | } eep_config; | |
27c868c2 | 2270 | /* /proc/scsi/advansys/[0...] */ |
1da177e4 | 2271 | #ifdef ADVANSYS_STATS |
27c868c2 MW |
2272 | struct asc_stats asc_stats; /* Board statistics */ |
2273 | #endif /* ADVANSYS_STATS */ | |
2274 | /* | |
2275 | * The following fields are used only for Narrow Boards. | |
2276 | */ | |
27c868c2 MW |
2277 | uchar sdtr_data[ASC_MAX_TID + 1]; /* SDTR information */ |
2278 | /* | |
2279 | * The following fields are used only for Wide Boards. | |
2280 | */ | |
2281 | void __iomem *ioremap_addr; /* I/O Memory remap address. */ | |
2282 | ushort ioport; /* I/O Port address. */ | |
27c868c2 | 2283 | adv_req_t *adv_reqp; /* Request structures. */ |
4b47e464 HR |
2284 | dma_addr_t adv_reqp_addr; |
2285 | size_t adv_reqp_size; | |
0ce53822 | 2286 | struct dma_pool *adv_sgblk_pool; /* Scatter-gather structures. */ |
27c868c2 MW |
2287 | ushort bios_signature; /* BIOS Signature. */ |
2288 | ushort bios_version; /* BIOS Version. */ | |
2289 | ushort bios_codeseg; /* BIOS Code Segment. */ | |
2290 | ushort bios_codelen; /* BIOS Code Segment Length. */ | |
d2411495 | 2291 | }; |
1da177e4 | 2292 | |
d10fb2c7 MW |
2293 | #define asc_dvc_to_board(asc_dvc) container_of(asc_dvc, struct asc_board, \ |
2294 | dvc_var.asc_dvc_var) | |
13ac2d9c MW |
2295 | #define adv_dvc_to_board(adv_dvc) container_of(adv_dvc, struct asc_board, \ |
2296 | dvc_var.adv_dvc_var) | |
2297 | #define adv_dvc_to_pdev(adv_dvc) to_pci_dev(adv_dvc_to_board(adv_dvc)->dev) | |
2298 | ||
1da177e4 | 2299 | #ifdef ADVANSYS_DEBUG |
27c868c2 | 2300 | static int asc_dbglvl = 3; |
1da177e4 | 2301 | |
1da177e4 | 2302 | /* |
51219358 | 2303 | * asc_prt_asc_dvc_var() |
1da177e4 | 2304 | */ |
51219358 | 2305 | static void asc_prt_asc_dvc_var(ASC_DVC_VAR *h) |
1da177e4 | 2306 | { |
51219358 | 2307 | printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h); |
27c868c2 | 2308 | |
51219358 MW |
2309 | printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl " |
2310 | "%d,\n", h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl); | |
2311 | ||
2312 | printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type, | |
2313 | (unsigned)h->init_sdtr); | |
2314 | ||
2315 | printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, " | |
2316 | "chip_no 0x%x,\n", (unsigned)h->sdtr_done, | |
2317 | (unsigned)h->use_tagged_qng, (unsigned)h->unit_not_ready, | |
2318 | (unsigned)h->chip_no); | |
2319 | ||
2320 | printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait " | |
2321 | "%u,\n", (unsigned)h->queue_full_or_busy, | |
2322 | (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); | |
2323 | ||
2324 | printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, " | |
2325 | "in_critical_cnt %u,\n", (unsigned)h->is_in_int, | |
2326 | (unsigned)h->max_total_qng, (unsigned)h->cur_total_qng, | |
2327 | (unsigned)h->in_critical_cnt); | |
2328 | ||
2329 | printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, " | |
2330 | "pci_fix_asyn_xfer 0x%x,\n", (unsigned)h->last_q_shortage, | |
2331 | (unsigned)h->init_state, (unsigned)h->no_scam, | |
2332 | (unsigned)h->pci_fix_asyn_xfer); | |
2333 | ||
d361db48 | 2334 | printk(" cfg 0x%lx\n", (ulong)h->cfg); |
1da177e4 LT |
2335 | } |
2336 | ||
51219358 MW |
2337 | /* |
2338 | * asc_prt_asc_dvc_cfg() | |
2339 | */ | |
2340 | static void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h) | |
6ed1ef07 | 2341 | { |
51219358 | 2342 | printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h); |
6ed1ef07 | 2343 | |
51219358 MW |
2344 | printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n", |
2345 | h->can_tagged_qng, h->cmd_qng_enabled); | |
2346 | printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n", | |
2347 | h->disc_enable, h->sdtr_enable); | |
6ed1ef07 | 2348 | |
b08fc565 MW |
2349 | printk(" chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, " |
2350 | "chip_version %d,\n", h->chip_scsi_id, h->isa_dma_speed, | |
2351 | h->isa_dma_channel, h->chip_version); | |
51219358 | 2352 | |
d10fb2c7 MW |
2353 | printk(" mcode_date 0x%x, mcode_version %d\n", |
2354 | h->mcode_date, h->mcode_version); | |
6ed1ef07 MW |
2355 | } |
2356 | ||
1da177e4 | 2357 | /* |
51219358 | 2358 | * asc_prt_adv_dvc_var() |
1da177e4 | 2359 | * |
51219358 | 2360 | * Display an ADV_DVC_VAR structure. |
1da177e4 | 2361 | */ |
51219358 | 2362 | static void asc_prt_adv_dvc_var(ADV_DVC_VAR *h) |
1da177e4 | 2363 | { |
51219358 | 2364 | printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h); |
27c868c2 | 2365 | |
51219358 MW |
2366 | printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n", |
2367 | (ulong)h->iop_base, h->err_code, (unsigned)h->ultra_able); | |
1da177e4 | 2368 | |
b352f923 MW |
2369 | printk(" sdtr_able 0x%x, wdtr_able 0x%x\n", |
2370 | (unsigned)h->sdtr_able, (unsigned)h->wdtr_able); | |
1da177e4 | 2371 | |
d361db48 MW |
2372 | printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n", |
2373 | (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); | |
1da177e4 | 2374 | |
98b96a7d | 2375 | printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%p\n", |
51219358 | 2376 | (unsigned)h->max_host_qng, (unsigned)h->max_dvc_qng, |
98b96a7d | 2377 | h->carr_freelist); |
1da177e4 | 2378 | |
98b96a7d | 2379 | printk(" icq_sp 0x%p, irq_sp 0x%p\n", h->icq_sp, h->irq_sp); |
1da177e4 | 2380 | |
51219358 MW |
2381 | printk(" no_scam 0x%x, tagqng_able 0x%x\n", |
2382 | (unsigned)h->no_scam, (unsigned)h->tagqng_able); | |
1da177e4 | 2383 | |
51219358 MW |
2384 | printk(" chip_scsi_id 0x%x, cfg 0x%lx\n", |
2385 | (unsigned)h->chip_scsi_id, (ulong)h->cfg); | |
2386 | } | |
1da177e4 | 2387 | |
51219358 MW |
2388 | /* |
2389 | * asc_prt_adv_dvc_cfg() | |
2390 | * | |
2391 | * Display an ADV_DVC_CFG structure. | |
2392 | */ | |
2393 | static void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h) | |
2394 | { | |
2395 | printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h); | |
27c868c2 | 2396 | |
51219358 MW |
2397 | printk(" disc_enable 0x%x, termination 0x%x\n", |
2398 | h->disc_enable, h->termination); | |
1da177e4 | 2399 | |
51219358 MW |
2400 | printk(" chip_version 0x%x, mcode_date 0x%x\n", |
2401 | h->chip_version, h->mcode_date); | |
27c868c2 | 2402 | |
b352f923 MW |
2403 | printk(" mcode_version 0x%x, control_flag 0x%x\n", |
2404 | h->mcode_version, h->control_flag); | |
1da177e4 LT |
2405 | } |
2406 | ||
2407 | /* | |
b352f923 | 2408 | * asc_prt_scsi_host() |
1da177e4 | 2409 | */ |
b352f923 | 2410 | static void asc_prt_scsi_host(struct Scsi_Host *s) |
1da177e4 | 2411 | { |
b352f923 | 2412 | struct asc_board *boardp = shost_priv(s); |
51219358 | 2413 | |
71610f55 | 2414 | printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev)); |
c84b023a ML |
2415 | printk(" host_busy %d, host_no %d,\n", |
2416 | scsi_host_busy(s), s->host_no); | |
51219358 | 2417 | |
b352f923 MW |
2418 | printk(" base 0x%lx, io_port 0x%lx, irq %d,\n", |
2419 | (ulong)s->base, (ulong)s->io_port, boardp->irq); | |
51219358 | 2420 | |
b352f923 MW |
2421 | printk(" dma_channel %d, this_id %d, can_queue %d,\n", |
2422 | s->dma_channel, s->this_id, s->can_queue); | |
1da177e4 | 2423 | |
b352f923 MW |
2424 | printk(" cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d\n", |
2425 | s->cmd_per_lun, s->sg_tablesize, s->unchecked_isa_dma); | |
27c868c2 | 2426 | |
b352f923 MW |
2427 | if (ASC_NARROW_BOARD(boardp)) { |
2428 | asc_prt_asc_dvc_var(&boardp->dvc_var.asc_dvc_var); | |
2429 | asc_prt_asc_dvc_cfg(&boardp->dvc_cfg.asc_dvc_cfg); | |
2430 | } else { | |
2431 | asc_prt_adv_dvc_var(&boardp->dvc_var.adv_dvc_var); | |
2432 | asc_prt_adv_dvc_cfg(&boardp->dvc_cfg.adv_dvc_cfg); | |
074c8fe4 | 2433 | } |
1da177e4 LT |
2434 | } |
2435 | ||
51219358 MW |
2436 | /* |
2437 | * asc_prt_hex() | |
2438 | * | |
2439 | * Print hexadecimal output in 4 byte groupings 32 bytes | |
2440 | * or 8 double-words per line. | |
2441 | */ | |
2442 | static void asc_prt_hex(char *f, uchar *s, int l) | |
47d853cc | 2443 | { |
51219358 MW |
2444 | int i; |
2445 | int j; | |
2446 | int k; | |
2447 | int m; | |
47d853cc | 2448 | |
51219358 MW |
2449 | printk("%s: (%d bytes)\n", f, l); |
2450 | ||
2451 | for (i = 0; i < l; i += 32) { | |
2452 | ||
2453 | /* Display a maximum of 8 double-words per line. */ | |
2454 | if ((k = (l - i) / 4) >= 8) { | |
2455 | k = 8; | |
2456 | m = 0; | |
47d853cc | 2457 | } else { |
51219358 | 2458 | m = (l - i) % 4; |
47d853cc MW |
2459 | } |
2460 | ||
51219358 MW |
2461 | for (j = 0; j < k; j++) { |
2462 | printk(" %2.2X%2.2X%2.2X%2.2X", | |
2463 | (unsigned)s[i + (j * 4)], | |
2464 | (unsigned)s[i + (j * 4) + 1], | |
2465 | (unsigned)s[i + (j * 4) + 2], | |
2466 | (unsigned)s[i + (j * 4) + 3]); | |
47d853cc | 2467 | } |
47d853cc | 2468 | |
51219358 MW |
2469 | switch (m) { |
2470 | case 0: | |
2471 | default: | |
2472 | break; | |
2473 | case 1: | |
2474 | printk(" %2.2X", (unsigned)s[i + (j * 4)]); | |
2475 | break; | |
2476 | case 2: | |
2477 | printk(" %2.2X%2.2X", | |
2478 | (unsigned)s[i + (j * 4)], | |
2479 | (unsigned)s[i + (j * 4) + 1]); | |
2480 | break; | |
2481 | case 3: | |
2482 | printk(" %2.2X%2.2X%2.2X", | |
2483 | (unsigned)s[i + (j * 4) + 1], | |
2484 | (unsigned)s[i + (j * 4) + 2], | |
2485 | (unsigned)s[i + (j * 4) + 3]); | |
2486 | break; | |
2487 | } | |
47d853cc | 2488 | |
51219358 | 2489 | printk("\n"); |
47d853cc MW |
2490 | } |
2491 | } | |
b352f923 MW |
2492 | |
2493 | /* | |
2494 | * asc_prt_asc_scsi_q() | |
2495 | */ | |
2496 | static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q) | |
2497 | { | |
2498 | ASC_SG_HEAD *sgp; | |
2499 | int i; | |
2500 | ||
2501 | printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q); | |
2502 | ||
2503 | printk | |
9c17c62a HR |
2504 | (" target_ix 0x%x, target_lun %u, srb_tag 0x%x, tag_code 0x%x,\n", |
2505 | q->q2.target_ix, q->q1.target_lun, q->q2.srb_tag, | |
b352f923 MW |
2506 | q->q2.tag_code); |
2507 | ||
2508 | printk | |
2509 | (" data_addr 0x%lx, data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", | |
2510 | (ulong)le32_to_cpu(q->q1.data_addr), | |
2511 | (ulong)le32_to_cpu(q->q1.data_cnt), | |
2512 | (ulong)le32_to_cpu(q->q1.sense_addr), q->q1.sense_len); | |
2513 | ||
2514 | printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n", | |
2515 | (ulong)q->cdbptr, q->q2.cdb_len, | |
2516 | (ulong)q->sg_head, q->q1.sg_queue_cnt); | |
2517 | ||
2518 | if (q->sg_head) { | |
2519 | sgp = q->sg_head; | |
2520 | printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp); | |
2521 | printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, | |
2522 | sgp->queue_cnt); | |
2523 | for (i = 0; i < sgp->entry_cnt; i++) { | |
2524 | printk(" [%u]: addr 0x%lx, bytes %lu\n", | |
2525 | i, (ulong)le32_to_cpu(sgp->sg_list[i].addr), | |
2526 | (ulong)le32_to_cpu(sgp->sg_list[i].bytes)); | |
2527 | } | |
2528 | ||
2529 | } | |
2530 | } | |
2531 | ||
2532 | /* | |
2533 | * asc_prt_asc_qdone_info() | |
2534 | */ | |
2535 | static void asc_prt_asc_qdone_info(ASC_QDONE_INFO *q) | |
2536 | { | |
2537 | printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q); | |
9c17c62a HR |
2538 | printk(" srb_tag 0x%x, target_ix %u, cdb_len %u, tag_code %u,\n", |
2539 | q->d2.srb_tag, q->d2.target_ix, q->d2.cdb_len, | |
b352f923 MW |
2540 | q->d2.tag_code); |
2541 | printk | |
2542 | (" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n", | |
2543 | q->d3.done_stat, q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg); | |
2544 | } | |
2545 | ||
2546 | /* | |
2547 | * asc_prt_adv_sgblock() | |
2548 | * | |
2549 | * Display an ADV_SG_BLOCK structure. | |
2550 | */ | |
2551 | static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b) | |
2552 | { | |
2553 | int i; | |
2554 | ||
0ce53822 | 2555 | printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n", |
b352f923 | 2556 | (ulong)b, sgblockno); |
d9748dbc HR |
2557 | printk(" sg_cnt %u, sg_ptr 0x%x\n", |
2558 | b->sg_cnt, (u32)le32_to_cpu(b->sg_ptr)); | |
b352f923 MW |
2559 | BUG_ON(b->sg_cnt > NO_OF_SG_PER_BLOCK); |
2560 | if (b->sg_ptr != 0) | |
2561 | BUG_ON(b->sg_cnt != NO_OF_SG_PER_BLOCK); | |
2562 | for (i = 0; i < b->sg_cnt; i++) { | |
d9748dbc HR |
2563 | printk(" [%u]: sg_addr 0x%x, sg_count 0x%x\n", |
2564 | i, (u32)le32_to_cpu(b->sg_list[i].sg_addr), | |
2565 | (u32)le32_to_cpu(b->sg_list[i].sg_count)); | |
b352f923 MW |
2566 | } |
2567 | } | |
2568 | ||
2569 | /* | |
2570 | * asc_prt_adv_scsi_req_q() | |
2571 | * | |
2572 | * Display an ADV_SCSI_REQ_Q structure. | |
2573 | */ | |
2574 | static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q) | |
2575 | { | |
2576 | int sg_blk_cnt; | |
0ce53822 HR |
2577 | struct adv_sg_block *sg_ptr; |
2578 | adv_sgblk_t *sgblkp; | |
b352f923 MW |
2579 | |
2580 | printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q); | |
2581 | ||
d9748dbc HR |
2582 | printk(" target_id %u, target_lun %u, srb_tag 0x%x\n", |
2583 | q->target_id, q->target_lun, q->srb_tag); | |
b352f923 | 2584 | |
98b96a7d HR |
2585 | printk(" cntl 0x%x, data_addr 0x%lx\n", |
2586 | q->cntl, (ulong)le32_to_cpu(q->data_addr)); | |
b352f923 MW |
2587 | |
2588 | printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", | |
2589 | (ulong)le32_to_cpu(q->data_cnt), | |
2590 | (ulong)le32_to_cpu(q->sense_addr), q->sense_len); | |
2591 | ||
2592 | printk | |
2593 | (" cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n", | |
2594 | q->cdb_len, q->done_status, q->host_status, q->scsi_status); | |
2595 | ||
2596 | printk(" sg_working_ix 0x%x, target_cmd %u\n", | |
2597 | q->sg_working_ix, q->target_cmd); | |
2598 | ||
2599 | printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n", | |
2600 | (ulong)le32_to_cpu(q->scsiq_rptr), | |
2601 | (ulong)le32_to_cpu(q->sg_real_addr), (ulong)q->sg_list_ptr); | |
2602 | ||
2603 | /* Display the request's ADV_SG_BLOCK structures. */ | |
2604 | if (q->sg_list_ptr != NULL) { | |
0ce53822 | 2605 | sgblkp = container_of(q->sg_list_ptr, adv_sgblk_t, sg_block); |
b352f923 | 2606 | sg_blk_cnt = 0; |
0ce53822 HR |
2607 | while (sgblkp) { |
2608 | sg_ptr = &sgblkp->sg_block; | |
b352f923 MW |
2609 | asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr); |
2610 | if (sg_ptr->sg_ptr == 0) { | |
2611 | break; | |
2612 | } | |
0ce53822 | 2613 | sgblkp = sgblkp->next_sgblkp; |
b352f923 MW |
2614 | sg_blk_cnt++; |
2615 | } | |
2616 | } | |
2617 | } | |
51219358 | 2618 | #endif /* ADVANSYS_DEBUG */ |
47d853cc | 2619 | |
1da177e4 | 2620 | /* |
51219358 | 2621 | * advansys_info() |
47d853cc | 2622 | * |
51219358 MW |
2623 | * Return suitable for printing on the console with the argument |
2624 | * adapter's configuration information. | |
2625 | * | |
2626 | * Note: The information line should not exceed ASC_INFO_SIZE bytes, | |
2627 | * otherwise the static 'info' array will be overrun. | |
1da177e4 | 2628 | */ |
51219358 | 2629 | static const char *advansys_info(struct Scsi_Host *shost) |
1da177e4 | 2630 | { |
51219358 | 2631 | static char info[ASC_INFO_SIZE]; |
d2411495 | 2632 | struct asc_board *boardp = shost_priv(shost); |
51219358 MW |
2633 | ASC_DVC_VAR *asc_dvc_varp; |
2634 | ADV_DVC_VAR *adv_dvc_varp; | |
2635 | char *busname; | |
2636 | char *widename = NULL; | |
1da177e4 | 2637 | |
51219358 MW |
2638 | if (ASC_NARROW_BOARD(boardp)) { |
2639 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; | |
b352f923 | 2640 | ASC_DBG(1, "begin\n"); |
51219358 MW |
2641 | if (asc_dvc_varp->bus_type & ASC_IS_ISA) { |
2642 | if ((asc_dvc_varp->bus_type & ASC_IS_ISAPNP) == | |
2643 | ASC_IS_ISAPNP) { | |
2644 | busname = "ISA PnP"; | |
2645 | } else { | |
2646 | busname = "ISA"; | |
2647 | } | |
2648 | sprintf(info, | |
2649 | "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X, DMA 0x%X", | |
2650 | ASC_VERSION, busname, | |
2651 | (ulong)shost->io_port, | |
2652 | (ulong)shost->io_port + ASC_IOADR_GAP - 1, | |
d361db48 | 2653 | boardp->irq, shost->dma_channel); |
51219358 MW |
2654 | } else { |
2655 | if (asc_dvc_varp->bus_type & ASC_IS_VL) { | |
2656 | busname = "VL"; | |
2657 | } else if (asc_dvc_varp->bus_type & ASC_IS_EISA) { | |
2658 | busname = "EISA"; | |
2659 | } else if (asc_dvc_varp->bus_type & ASC_IS_PCI) { | |
2660 | if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA) | |
2661 | == ASC_IS_PCI_ULTRA) { | |
2662 | busname = "PCI Ultra"; | |
2663 | } else { | |
2664 | busname = "PCI"; | |
2665 | } | |
2666 | } else { | |
2667 | busname = "?"; | |
9d0e96eb MW |
2668 | shost_printk(KERN_ERR, shost, "unknown bus " |
2669 | "type %d\n", asc_dvc_varp->bus_type); | |
51219358 MW |
2670 | } |
2671 | sprintf(info, | |
2672 | "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X", | |
2673 | ASC_VERSION, busname, (ulong)shost->io_port, | |
2674 | (ulong)shost->io_port + ASC_IOADR_GAP - 1, | |
d361db48 | 2675 | boardp->irq); |
51219358 MW |
2676 | } |
2677 | } else { | |
2678 | /* | |
2679 | * Wide Adapter Information | |
2680 | * | |
2681 | * Memory-mapped I/O is used instead of I/O space to access | |
2682 | * the adapter, but display the I/O Port range. The Memory | |
2683 | * I/O address is displayed through the driver /proc file. | |
2684 | */ | |
2685 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; | |
2686 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { | |
2687 | widename = "Ultra-Wide"; | |
2688 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
2689 | widename = "Ultra2-Wide"; | |
2690 | } else { | |
2691 | widename = "Ultra3-Wide"; | |
2692 | } | |
2693 | sprintf(info, | |
2694 | "AdvanSys SCSI %s: PCI %s: PCIMEM 0x%lX-0x%lX, IRQ 0x%X", | |
2695 | ASC_VERSION, widename, (ulong)adv_dvc_varp->iop_base, | |
d361db48 | 2696 | (ulong)adv_dvc_varp->iop_base + boardp->asc_n_io_port - 1, boardp->irq); |
51219358 MW |
2697 | } |
2698 | BUG_ON(strlen(info) >= ASC_INFO_SIZE); | |
b352f923 | 2699 | ASC_DBG(1, "end\n"); |
51219358 | 2700 | return info; |
47d853cc MW |
2701 | } |
2702 | ||
51219358 | 2703 | #ifdef CONFIG_PROC_FS |
47d853cc MW |
2704 | |
2705 | /* | |
51219358 | 2706 | * asc_prt_board_devices() |
47d853cc | 2707 | * |
51219358 | 2708 | * Print driver information for devices attached to the board. |
47d853cc | 2709 | */ |
b59fb6fd | 2710 | static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost) |
47d853cc | 2711 | { |
d2411495 | 2712 | struct asc_board *boardp = shost_priv(shost); |
51219358 MW |
2713 | int chip_scsi_id; |
2714 | int i; | |
47d853cc | 2715 | |
b59fb6fd AV |
2716 | seq_printf(m, |
2717 | "\nDevice Information for AdvanSys SCSI Host %d:\n", | |
2718 | shost->host_no); | |
47d853cc | 2719 | |
51219358 MW |
2720 | if (ASC_NARROW_BOARD(boardp)) { |
2721 | chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; | |
2722 | } else { | |
2723 | chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; | |
47d853cc MW |
2724 | } |
2725 | ||
2f979427 | 2726 | seq_puts(m, "Target IDs Detected:"); |
51219358 | 2727 | for (i = 0; i <= ADV_MAX_TID; i++) { |
b59fb6fd AV |
2728 | if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) |
2729 | seq_printf(m, " %X,", i); | |
27c868c2 | 2730 | } |
b59fb6fd | 2731 | seq_printf(m, " (%X=Host Adapter)\n", chip_scsi_id); |
47d853cc MW |
2732 | } |
2733 | ||
2734 | /* | |
51219358 | 2735 | * Display Wide Board BIOS Information. |
47d853cc | 2736 | */ |
b59fb6fd | 2737 | static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost) |
47d853cc | 2738 | { |
d2411495 | 2739 | struct asc_board *boardp = shost_priv(shost); |
51219358 MW |
2740 | ushort major, minor, letter; |
2741 | ||
2f979427 | 2742 | seq_puts(m, "\nROM BIOS Version: "); |
47d853cc MW |
2743 | |
2744 | /* | |
51219358 MW |
2745 | * If the BIOS saved a valid signature, then fill in |
2746 | * the BIOS code segment base address. | |
47d853cc | 2747 | */ |
51219358 | 2748 | if (boardp->bios_signature != 0x55AA) { |
3d30079c RV |
2749 | seq_puts(m, "Disabled or Pre-3.1\n" |
2750 | "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n" | |
2751 | "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n"); | |
51219358 MW |
2752 | } else { |
2753 | major = (boardp->bios_version >> 12) & 0xF; | |
2754 | minor = (boardp->bios_version >> 8) & 0xF; | |
2755 | letter = (boardp->bios_version & 0xFF); | |
47d853cc | 2756 | |
b59fb6fd | 2757 | seq_printf(m, "%d.%d%c\n", |
51219358 MW |
2758 | major, minor, |
2759 | letter >= 26 ? '?' : letter + 'A'); | |
51219358 MW |
2760 | /* |
2761 | * Current available ROM BIOS release is 3.1I for UW | |
2762 | * and 3.2I for U2W. This code doesn't differentiate | |
2763 | * UW and U2W boards. | |
2764 | */ | |
2765 | if (major < 3 || (major <= 3 && minor < 1) || | |
2766 | (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) { | |
3d30079c RV |
2767 | seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n" |
2768 | "ftp://ftp.connectcom.net/pub\n"); | |
51219358 MW |
2769 | } |
2770 | } | |
1da177e4 LT |
2771 | } |
2772 | ||
1da177e4 | 2773 | /* |
51219358 MW |
2774 | * Add serial number to information bar if signature AAh |
2775 | * is found in at bit 15-9 (7 bits) of word 1. | |
1da177e4 | 2776 | * |
51219358 | 2777 | * Serial Number consists fo 12 alpha-numeric digits. |
1da177e4 | 2778 | * |
51219358 MW |
2779 | * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits) |
2780 | * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits) | |
2781 | * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits) | |
2782 | * 5 - Product revision (A-J) Word0: " " | |
1da177e4 | 2783 | * |
51219358 MW |
2784 | * Signature Word1: 15-9 (7 bits) |
2785 | * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit) | |
2786 | * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits) | |
1da177e4 | 2787 | * |
51219358 | 2788 | * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits) |
1da177e4 | 2789 | * |
51219358 | 2790 | * Note 1: Only production cards will have a serial number. |
1da177e4 | 2791 | * |
51219358 | 2792 | * Note 2: Signature is most significant 7 bits (0xFE). |
1da177e4 | 2793 | * |
51219358 | 2794 | * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE. |
1da177e4 | 2795 | */ |
51219358 | 2796 | static int asc_get_eeprom_string(ushort *serialnum, uchar *cp) |
1da177e4 | 2797 | { |
51219358 | 2798 | ushort w, num; |
27c868c2 | 2799 | |
51219358 MW |
2800 | if ((serialnum[1] & 0xFE00) != ((ushort)0xAA << 8)) { |
2801 | return ASC_FALSE; | |
2802 | } else { | |
2803 | /* | |
2804 | * First word - 6 digits. | |
2805 | */ | |
2806 | w = serialnum[0]; | |
27c868c2 | 2807 | |
51219358 MW |
2808 | /* Product type - 1st digit. */ |
2809 | if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') { | |
2810 | /* Product type is P=Prototype */ | |
2811 | *cp += 0x8; | |
2812 | } | |
2813 | cp++; | |
2814 | ||
2815 | /* Manufacturing location - 2nd digit. */ | |
2816 | *cp++ = 'A' + ((w & 0x1C00) >> 10); | |
2817 | ||
2818 | /* Product ID - 3rd, 4th digits. */ | |
2819 | num = w & 0x3FF; | |
2820 | *cp++ = '0' + (num / 100); | |
2821 | num %= 100; | |
2822 | *cp++ = '0' + (num / 10); | |
2823 | ||
2824 | /* Product revision - 5th digit. */ | |
2825 | *cp++ = 'A' + (num % 10); | |
27c868c2 | 2826 | |
27c868c2 | 2827 | /* |
51219358 | 2828 | * Second word |
27c868c2 | 2829 | */ |
51219358 | 2830 | w = serialnum[1]; |
27c868c2 MW |
2831 | |
2832 | /* | |
51219358 | 2833 | * Year - 6th digit. |
27c868c2 | 2834 | * |
51219358 MW |
2835 | * If bit 15 of third word is set, then the |
2836 | * last digit of the year is greater than 7. | |
27c868c2 | 2837 | */ |
51219358 MW |
2838 | if (serialnum[2] & 0x8000) { |
2839 | *cp++ = '8' + ((w & 0x1C0) >> 6); | |
2840 | } else { | |
2841 | *cp++ = '0' + ((w & 0x1C0) >> 6); | |
27c868c2 MW |
2842 | } |
2843 | ||
51219358 MW |
2844 | /* Week of year - 7th, 8th digits. */ |
2845 | num = w & 0x003F; | |
2846 | *cp++ = '0' + num / 10; | |
2847 | num %= 10; | |
2848 | *cp++ = '0' + num; | |
27c868c2 MW |
2849 | |
2850 | /* | |
51219358 | 2851 | * Third word |
27c868c2 | 2852 | */ |
51219358 | 2853 | w = serialnum[2] & 0x7FFF; |
1da177e4 | 2854 | |
51219358 MW |
2855 | /* Serial number - 9th digit. */ |
2856 | *cp++ = 'A' + (w / 1000); | |
27c868c2 | 2857 | |
51219358 MW |
2858 | /* 10th, 11th, 12th digits. */ |
2859 | num = w % 1000; | |
2860 | *cp++ = '0' + num / 100; | |
2861 | num %= 100; | |
2862 | *cp++ = '0' + num / 10; | |
2863 | num %= 10; | |
2864 | *cp++ = '0' + num; | |
2865 | ||
2866 | *cp = '\0'; /* Null Terminate the string. */ | |
2867 | return ASC_TRUE; | |
2868 | } | |
1da177e4 LT |
2869 | } |
2870 | ||
2871 | /* | |
51219358 | 2872 | * asc_prt_asc_board_eeprom() |
1da177e4 | 2873 | * |
51219358 | 2874 | * Print board EEPROM configuration. |
1da177e4 | 2875 | */ |
b59fb6fd | 2876 | static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 2877 | { |
d2411495 | 2878 | struct asc_board *boardp = shost_priv(shost); |
51219358 | 2879 | ASC_DVC_VAR *asc_dvc_varp; |
51219358 MW |
2880 | ASCEEP_CONFIG *ep; |
2881 | int i; | |
2882 | #ifdef CONFIG_ISA | |
2883 | int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 }; | |
2884 | #endif /* CONFIG_ISA */ | |
2885 | uchar serialstr[13]; | |
27c868c2 | 2886 | |
51219358 MW |
2887 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
2888 | ep = &boardp->eep_config.asc_eep; | |
27c868c2 | 2889 | |
b59fb6fd AV |
2890 | seq_printf(m, |
2891 | "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", | |
2892 | shost->host_no); | |
1da177e4 | 2893 | |
51219358 | 2894 | if (asc_get_eeprom_string((ushort *)&ep->adapter_info[0], serialstr) |
b59fb6fd AV |
2895 | == ASC_TRUE) |
2896 | seq_printf(m, " Serial Number: %s\n", serialstr); | |
2897 | else if (ep->adapter_info[5] == 0xBB) | |
2f979427 RV |
2898 | seq_puts(m, |
2899 | " Default Settings Used for EEPROM-less Adapter.\n"); | |
b59fb6fd | 2900 | else |
2f979427 | 2901 | seq_puts(m, " Serial Number Signature Not Present.\n"); |
b59fb6fd AV |
2902 | |
2903 | seq_printf(m, | |
2904 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", | |
2905 | ASC_EEP_GET_CHIP_ID(ep), ep->max_total_qng, | |
2906 | ep->max_tag_qng); | |
2907 | ||
2908 | seq_printf(m, | |
2909 | " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam); | |
2910 | ||
2f979427 | 2911 | seq_puts(m, " Target ID: "); |
b59fb6fd AV |
2912 | for (i = 0; i <= ASC_MAX_TID; i++) |
2913 | seq_printf(m, " %d", i); | |
b59fb6fd | 2914 | |
3d30079c | 2915 | seq_puts(m, "\n Disconnects: "); |
b59fb6fd AV |
2916 | for (i = 0; i <= ASC_MAX_TID; i++) |
2917 | seq_printf(m, " %c", | |
2918 | (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
b59fb6fd | 2919 | |
3d30079c | 2920 | seq_puts(m, "\n Command Queuing: "); |
b59fb6fd AV |
2921 | for (i = 0; i <= ASC_MAX_TID; i++) |
2922 | seq_printf(m, " %c", | |
2923 | (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
b59fb6fd | 2924 | |
3d30079c | 2925 | seq_puts(m, "\n Start Motor: "); |
b59fb6fd AV |
2926 | for (i = 0; i <= ASC_MAX_TID; i++) |
2927 | seq_printf(m, " %c", | |
2928 | (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
b59fb6fd | 2929 | |
3d30079c | 2930 | seq_puts(m, "\n Synchronous Transfer:"); |
b59fb6fd AV |
2931 | for (i = 0; i <= ASC_MAX_TID; i++) |
2932 | seq_printf(m, " %c", | |
2933 | (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
f50332ff | 2934 | seq_putc(m, '\n'); |
51219358 MW |
2935 | |
2936 | #ifdef CONFIG_ISA | |
2937 | if (asc_dvc_varp->bus_type & ASC_IS_ISA) { | |
b59fb6fd AV |
2938 | seq_printf(m, |
2939 | " Host ISA DMA speed: %d MB/S\n", | |
2940 | isa_dma_speed[ASC_EEP_GET_DMA_SPD(ep)]); | |
51219358 MW |
2941 | } |
2942 | #endif /* CONFIG_ISA */ | |
1da177e4 LT |
2943 | } |
2944 | ||
2945 | /* | |
51219358 | 2946 | * asc_prt_adv_board_eeprom() |
1da177e4 | 2947 | * |
51219358 | 2948 | * Print board EEPROM configuration. |
1da177e4 | 2949 | */ |
b59fb6fd | 2950 | static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 2951 | { |
d2411495 | 2952 | struct asc_board *boardp = shost_priv(shost); |
51219358 | 2953 | ADV_DVC_VAR *adv_dvc_varp; |
27c868c2 | 2954 | int i; |
51219358 MW |
2955 | char *termstr; |
2956 | uchar serialstr[13]; | |
2957 | ADVEEP_3550_CONFIG *ep_3550 = NULL; | |
2958 | ADVEEP_38C0800_CONFIG *ep_38C0800 = NULL; | |
2959 | ADVEEP_38C1600_CONFIG *ep_38C1600 = NULL; | |
2960 | ushort word; | |
2961 | ushort *wordp; | |
2962 | ushort sdtr_speed = 0; | |
27c868c2 | 2963 | |
51219358 MW |
2964 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
2965 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { | |
2966 | ep_3550 = &boardp->eep_config.adv_3550_eep; | |
2967 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
2968 | ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; | |
27c868c2 | 2969 | } else { |
51219358 | 2970 | ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; |
27c868c2 | 2971 | } |
1da177e4 | 2972 | |
b59fb6fd AV |
2973 | seq_printf(m, |
2974 | "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", | |
2975 | shost->host_no); | |
27c868c2 | 2976 | |
51219358 MW |
2977 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
2978 | wordp = &ep_3550->serial_number_word1; | |
2979 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
2980 | wordp = &ep_38C0800->serial_number_word1; | |
2981 | } else { | |
2982 | wordp = &ep_38C1600->serial_number_word1; | |
2983 | } | |
27c868c2 | 2984 | |
b59fb6fd AV |
2985 | if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE) |
2986 | seq_printf(m, " Serial Number: %s\n", serialstr); | |
2987 | else | |
2f979427 | 2988 | seq_puts(m, " Serial Number Signature Not Present.\n"); |
27c868c2 | 2989 | |
b59fb6fd AV |
2990 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) |
2991 | seq_printf(m, | |
2992 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", | |
2993 | ep_3550->adapter_scsi_id, | |
2994 | ep_3550->max_host_qng, ep_3550->max_dvc_qng); | |
2995 | else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) | |
2996 | seq_printf(m, | |
2997 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", | |
2998 | ep_38C0800->adapter_scsi_id, | |
2999 | ep_38C0800->max_host_qng, | |
3000 | ep_38C0800->max_dvc_qng); | |
3001 | else | |
3002 | seq_printf(m, | |
3003 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", | |
3004 | ep_38C1600->adapter_scsi_id, | |
3005 | ep_38C1600->max_host_qng, | |
3006 | ep_38C1600->max_dvc_qng); | |
51219358 MW |
3007 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
3008 | word = ep_3550->termination; | |
3009 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
3010 | word = ep_38C0800->termination_lvd; | |
3011 | } else { | |
3012 | word = ep_38C1600->termination_lvd; | |
3013 | } | |
3014 | switch (word) { | |
3015 | case 1: | |
3016 | termstr = "Low Off/High Off"; | |
3017 | break; | |
3018 | case 2: | |
3019 | termstr = "Low Off/High On"; | |
3020 | break; | |
3021 | case 3: | |
3022 | termstr = "Low On/High On"; | |
3023 | break; | |
3024 | default: | |
3025 | case 0: | |
3026 | termstr = "Automatic"; | |
3027 | break; | |
27c868c2 | 3028 | } |
1da177e4 | 3029 | |
b59fb6fd AV |
3030 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) |
3031 | seq_printf(m, | |
3032 | " termination: %u (%s), bios_ctrl: 0x%x\n", | |
3033 | ep_3550->termination, termstr, | |
3034 | ep_3550->bios_ctrl); | |
3035 | else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) | |
3036 | seq_printf(m, | |
3037 | " termination: %u (%s), bios_ctrl: 0x%x\n", | |
3038 | ep_38C0800->termination_lvd, termstr, | |
3039 | ep_38C0800->bios_ctrl); | |
3040 | else | |
3041 | seq_printf(m, | |
3042 | " termination: %u (%s), bios_ctrl: 0x%x\n", | |
3043 | ep_38C1600->termination_lvd, termstr, | |
3044 | ep_38C1600->bios_ctrl); | |
1da177e4 | 3045 | |
2f979427 | 3046 | seq_puts(m, " Target ID: "); |
b59fb6fd AV |
3047 | for (i = 0; i <= ADV_MAX_TID; i++) |
3048 | seq_printf(m, " %X", i); | |
f50332ff | 3049 | seq_putc(m, '\n'); |
1da177e4 | 3050 | |
51219358 MW |
3051 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
3052 | word = ep_3550->disc_enable; | |
3053 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
3054 | word = ep_38C0800->disc_enable; | |
3055 | } else { | |
3056 | word = ep_38C1600->disc_enable; | |
3057 | } | |
2f979427 | 3058 | seq_puts(m, " Disconnects: "); |
b59fb6fd AV |
3059 | for (i = 0; i <= ADV_MAX_TID; i++) |
3060 | seq_printf(m, " %c", | |
3061 | (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
f50332ff | 3062 | seq_putc(m, '\n'); |
1da177e4 | 3063 | |
51219358 MW |
3064 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
3065 | word = ep_3550->tagqng_able; | |
3066 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
3067 | word = ep_38C0800->tagqng_able; | |
3068 | } else { | |
3069 | word = ep_38C1600->tagqng_able; | |
3070 | } | |
2f979427 | 3071 | seq_puts(m, " Command Queuing: "); |
b59fb6fd AV |
3072 | for (i = 0; i <= ADV_MAX_TID; i++) |
3073 | seq_printf(m, " %c", | |
3074 | (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
f50332ff | 3075 | seq_putc(m, '\n'); |
1da177e4 | 3076 | |
51219358 MW |
3077 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
3078 | word = ep_3550->start_motor; | |
3079 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
3080 | word = ep_38C0800->start_motor; | |
27c868c2 | 3081 | } else { |
51219358 MW |
3082 | word = ep_38C1600->start_motor; |
3083 | } | |
2f979427 | 3084 | seq_puts(m, " Start Motor: "); |
b59fb6fd AV |
3085 | for (i = 0; i <= ADV_MAX_TID; i++) |
3086 | seq_printf(m, " %c", | |
3087 | (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
f50332ff | 3088 | seq_putc(m, '\n'); |
27c868c2 | 3089 | |
51219358 | 3090 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
2f979427 | 3091 | seq_puts(m, " Synchronous Transfer:"); |
b59fb6fd AV |
3092 | for (i = 0; i <= ADV_MAX_TID; i++) |
3093 | seq_printf(m, " %c", | |
3094 | (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ? | |
3095 | 'Y' : 'N'); | |
f50332ff | 3096 | seq_putc(m, '\n'); |
51219358 | 3097 | } |
27c868c2 | 3098 | |
51219358 | 3099 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
2f979427 | 3100 | seq_puts(m, " Ultra Transfer: "); |
b59fb6fd AV |
3101 | for (i = 0; i <= ADV_MAX_TID; i++) |
3102 | seq_printf(m, " %c", | |
3103 | (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i)) | |
3104 | ? 'Y' : 'N'); | |
f50332ff | 3105 | seq_putc(m, '\n'); |
51219358 | 3106 | } |
27c868c2 | 3107 | |
51219358 MW |
3108 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { |
3109 | word = ep_3550->wdtr_able; | |
3110 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
3111 | word = ep_38C0800->wdtr_able; | |
3112 | } else { | |
3113 | word = ep_38C1600->wdtr_able; | |
3114 | } | |
2f979427 | 3115 | seq_puts(m, " Wide Transfer: "); |
b59fb6fd AV |
3116 | for (i = 0; i <= ADV_MAX_TID; i++) |
3117 | seq_printf(m, " %c", | |
3118 | (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
f50332ff | 3119 | seq_putc(m, '\n'); |
1da177e4 | 3120 | |
51219358 MW |
3121 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 || |
3122 | adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) { | |
2f979427 | 3123 | seq_puts(m, " Synchronous Transfer Speed (Mhz):\n "); |
51219358 MW |
3124 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3125 | char *speed_str; | |
1da177e4 | 3126 | |
51219358 MW |
3127 | if (i == 0) { |
3128 | sdtr_speed = adv_dvc_varp->sdtr_speed1; | |
3129 | } else if (i == 4) { | |
3130 | sdtr_speed = adv_dvc_varp->sdtr_speed2; | |
3131 | } else if (i == 8) { | |
3132 | sdtr_speed = adv_dvc_varp->sdtr_speed3; | |
3133 | } else if (i == 12) { | |
3134 | sdtr_speed = adv_dvc_varp->sdtr_speed4; | |
3135 | } | |
3136 | switch (sdtr_speed & ADV_MAX_TID) { | |
3137 | case 0: | |
3138 | speed_str = "Off"; | |
3139 | break; | |
3140 | case 1: | |
3141 | speed_str = " 5"; | |
3142 | break; | |
3143 | case 2: | |
3144 | speed_str = " 10"; | |
3145 | break; | |
3146 | case 3: | |
3147 | speed_str = " 20"; | |
3148 | break; | |
3149 | case 4: | |
3150 | speed_str = " 40"; | |
3151 | break; | |
3152 | case 5: | |
3153 | speed_str = " 80"; | |
3154 | break; | |
3155 | default: | |
3156 | speed_str = "Unk"; | |
3157 | break; | |
3158 | } | |
b59fb6fd AV |
3159 | seq_printf(m, "%X:%s ", i, speed_str); |
3160 | if (i == 7) | |
2f979427 | 3161 | seq_puts(m, "\n "); |
51219358 MW |
3162 | sdtr_speed >>= 4; |
3163 | } | |
f50332ff | 3164 | seq_putc(m, '\n'); |
51219358 | 3165 | } |
1da177e4 LT |
3166 | } |
3167 | ||
3168 | /* | |
51219358 | 3169 | * asc_prt_driver_conf() |
1da177e4 | 3170 | */ |
b59fb6fd | 3171 | static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 3172 | { |
d2411495 | 3173 | struct asc_board *boardp = shost_priv(shost); |
51219358 | 3174 | int chip_scsi_id; |
27c868c2 | 3175 | |
b59fb6fd AV |
3176 | seq_printf(m, |
3177 | "\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n", | |
3178 | shost->host_no); | |
27c868c2 | 3179 | |
b59fb6fd | 3180 | seq_printf(m, |
c84b023a ML |
3181 | " host_busy %d, max_id %u, max_lun %llu, max_channel %u\n", |
3182 | scsi_host_busy(shost), shost->max_id, | |
b59fb6fd | 3183 | shost->max_lun, shost->max_channel); |
95c9f162 | 3184 | |
b59fb6fd AV |
3185 | seq_printf(m, |
3186 | " unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n", | |
3187 | shost->unique_id, shost->can_queue, shost->this_id, | |
3188 | shost->sg_tablesize, shost->cmd_per_lun); | |
95c9f162 | 3189 | |
b59fb6fd | 3190 | seq_printf(m, |
4af14d11 CH |
3191 | " unchecked_isa_dma %d\n", |
3192 | shost->unchecked_isa_dma); | |
95c9f162 | 3193 | |
b59fb6fd | 3194 | seq_printf(m, |
31491e1a | 3195 | " flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n", |
eac0b0c7 | 3196 | boardp->flags, shost->last_reset, jiffies, |
b59fb6fd | 3197 | boardp->asc_n_io_port); |
27c868c2 | 3198 | |
31491e1a | 3199 | seq_printf(m, " io_port 0x%lx\n", shost->io_port); |
27c868c2 | 3200 | |
51219358 MW |
3201 | if (ASC_NARROW_BOARD(boardp)) { |
3202 | chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; | |
3203 | } else { | |
3204 | chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; | |
27c868c2 | 3205 | } |
1da177e4 LT |
3206 | } |
3207 | ||
3208 | /* | |
51219358 | 3209 | * asc_prt_asc_board_info() |
1da177e4 | 3210 | * |
51219358 | 3211 | * Print dynamic board configuration information. |
1da177e4 | 3212 | */ |
b59fb6fd | 3213 | static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 3214 | { |
d2411495 | 3215 | struct asc_board *boardp = shost_priv(shost); |
51219358 | 3216 | int chip_scsi_id; |
51219358 MW |
3217 | ASC_DVC_VAR *v; |
3218 | ASC_DVC_CFG *c; | |
3219 | int i; | |
3220 | int renegotiate = 0; | |
27c868c2 | 3221 | |
51219358 MW |
3222 | v = &boardp->dvc_var.asc_dvc_var; |
3223 | c = &boardp->dvc_cfg.asc_dvc_cfg; | |
3224 | chip_scsi_id = c->chip_scsi_id; | |
27c868c2 | 3225 | |
b59fb6fd AV |
3226 | seq_printf(m, |
3227 | "\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", | |
3228 | shost->host_no); | |
27c868c2 | 3229 | |
b59fb6fd AV |
3230 | seq_printf(m, " chip_version %u, mcode_date 0x%x, " |
3231 | "mcode_version 0x%x, err_code %u\n", | |
3232 | c->chip_version, c->mcode_date, c->mcode_version, | |
3233 | v->err_code); | |
1da177e4 | 3234 | |
51219358 | 3235 | /* Current number of commands waiting for the host. */ |
b59fb6fd AV |
3236 | seq_printf(m, |
3237 | " Total Command Pending: %d\n", v->cur_total_qng); | |
1da177e4 | 3238 | |
2f979427 | 3239 | seq_puts(m, " Command Queuing:"); |
51219358 MW |
3240 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3241 | if ((chip_scsi_id == i) || | |
3242 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3243 | continue; | |
27c868c2 | 3244 | } |
b59fb6fd AV |
3245 | seq_printf(m, " %X:%c", |
3246 | i, | |
3247 | (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
51219358 | 3248 | } |
27c868c2 | 3249 | |
51219358 | 3250 | /* Current number of commands waiting for a device. */ |
3d30079c | 3251 | seq_puts(m, "\n Command Queue Pending:"); |
51219358 MW |
3252 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3253 | if ((chip_scsi_id == i) || | |
3254 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3255 | continue; | |
27c868c2 | 3256 | } |
b59fb6fd | 3257 | seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]); |
27c868c2 | 3258 | } |
1da177e4 | 3259 | |
51219358 | 3260 | /* Current limit on number of commands that can be sent to a device. */ |
3d30079c | 3261 | seq_puts(m, "\n Command Queue Limit:"); |
51219358 MW |
3262 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3263 | if ((chip_scsi_id == i) || | |
3264 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3265 | continue; | |
3266 | } | |
b59fb6fd | 3267 | seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]); |
27c868c2 | 3268 | } |
1da177e4 | 3269 | |
51219358 | 3270 | /* Indicate whether the device has returned queue full status. */ |
3d30079c | 3271 | seq_puts(m, "\n Command Queue Full:"); |
51219358 MW |
3272 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3273 | if ((chip_scsi_id == i) || | |
3274 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3275 | continue; | |
3276 | } | |
b59fb6fd AV |
3277 | if (boardp->queue_full & ADV_TID_TO_TIDMASK(i)) |
3278 | seq_printf(m, " %X:Y-%d", | |
3279 | i, boardp->queue_full_cnt[i]); | |
3280 | else | |
3281 | seq_printf(m, " %X:N", i); | |
51219358 | 3282 | } |
1da177e4 | 3283 | |
3d30079c | 3284 | seq_puts(m, "\n Synchronous Transfer:"); |
51219358 MW |
3285 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3286 | if ((chip_scsi_id == i) || | |
3287 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3288 | continue; | |
3289 | } | |
b59fb6fd AV |
3290 | seq_printf(m, " %X:%c", |
3291 | i, | |
3292 | (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
27c868c2 | 3293 | } |
f50332ff | 3294 | seq_putc(m, '\n'); |
1da177e4 | 3295 | |
51219358 MW |
3296 | for (i = 0; i <= ASC_MAX_TID; i++) { |
3297 | uchar syn_period_ix; | |
1da177e4 | 3298 | |
51219358 MW |
3299 | if ((chip_scsi_id == i) || |
3300 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || | |
3301 | ((v->init_sdtr & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3302 | continue; | |
27c868c2 | 3303 | } |
27c868c2 | 3304 | |
b59fb6fd | 3305 | seq_printf(m, " %X:", i); |
27c868c2 | 3306 | |
51219358 | 3307 | if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) { |
2f979427 | 3308 | seq_puts(m, " Asynchronous"); |
51219358 MW |
3309 | } else { |
3310 | syn_period_ix = | |
3311 | (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - | |
3312 | 1); | |
27c868c2 | 3313 | |
b59fb6fd AV |
3314 | seq_printf(m, |
3315 | " Transfer Period Factor: %d (%d.%d Mhz),", | |
3316 | v->sdtr_period_tbl[syn_period_ix], | |
3317 | 250 / v->sdtr_period_tbl[syn_period_ix], | |
3318 | ASC_TENTHS(250, | |
3319 | v->sdtr_period_tbl[syn_period_ix])); | |
27c868c2 | 3320 | |
b59fb6fd AV |
3321 | seq_printf(m, " REQ/ACK Offset: %d", |
3322 | boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET); | |
51219358 | 3323 | } |
1da177e4 | 3324 | |
51219358 | 3325 | if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { |
2f979427 | 3326 | seq_puts(m, "*\n"); |
51219358 MW |
3327 | renegotiate = 1; |
3328 | } else { | |
f50332ff | 3329 | seq_putc(m, '\n'); |
51219358 | 3330 | } |
27c868c2 | 3331 | } |
1da177e4 | 3332 | |
51219358 | 3333 | if (renegotiate) { |
2f979427 | 3334 | seq_puts(m, " * = Re-negotiation pending before next command.\n"); |
27c868c2 | 3335 | } |
1da177e4 LT |
3336 | } |
3337 | ||
1da177e4 | 3338 | /* |
51219358 | 3339 | * asc_prt_adv_board_info() |
1da177e4 | 3340 | * |
51219358 | 3341 | * Print dynamic board configuration information. |
1da177e4 | 3342 | */ |
b59fb6fd | 3343 | static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 3344 | { |
d2411495 | 3345 | struct asc_board *boardp = shost_priv(shost); |
27c868c2 | 3346 | int i; |
51219358 MW |
3347 | ADV_DVC_VAR *v; |
3348 | ADV_DVC_CFG *c; | |
3349 | AdvPortAddr iop_base; | |
3350 | ushort chip_scsi_id; | |
3351 | ushort lramword; | |
3352 | uchar lrambyte; | |
3353 | ushort tagqng_able; | |
3354 | ushort sdtr_able, wdtr_able; | |
3355 | ushort wdtr_done, sdtr_done; | |
3356 | ushort period = 0; | |
3357 | int renegotiate = 0; | |
27c868c2 | 3358 | |
51219358 MW |
3359 | v = &boardp->dvc_var.adv_dvc_var; |
3360 | c = &boardp->dvc_cfg.adv_dvc_cfg; | |
3361 | iop_base = v->iop_base; | |
3362 | chip_scsi_id = v->chip_scsi_id; | |
3363 | ||
b59fb6fd AV |
3364 | seq_printf(m, |
3365 | "\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", | |
3366 | shost->host_no); | |
27c868c2 | 3367 | |
b59fb6fd AV |
3368 | seq_printf(m, |
3369 | " iop_base 0x%lx, cable_detect: %X, err_code %u\n", | |
31491e1a | 3370 | (unsigned long)v->iop_base, |
b59fb6fd AV |
3371 | AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT, |
3372 | v->err_code); | |
1da177e4 | 3373 | |
b59fb6fd AV |
3374 | seq_printf(m, " chip_version %u, mcode_date 0x%x, " |
3375 | "mcode_version 0x%x\n", c->chip_version, | |
3376 | c->mcode_date, c->mcode_version); | |
51219358 MW |
3377 | |
3378 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
2f979427 | 3379 | seq_puts(m, " Queuing Enabled:"); |
27c868c2 | 3380 | for (i = 0; i <= ADV_MAX_TID; i++) { |
51219358 MW |
3381 | if ((chip_scsi_id == i) || |
3382 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3383 | continue; | |
27c868c2 | 3384 | } |
51219358 | 3385 | |
b59fb6fd AV |
3386 | seq_printf(m, " %X:%c", |
3387 | i, | |
3388 | (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
27c868c2 | 3389 | } |
1da177e4 | 3390 | |
3d30079c | 3391 | seq_puts(m, "\n Queue Limit:"); |
51219358 MW |
3392 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3393 | if ((chip_scsi_id == i) || | |
3394 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3395 | continue; | |
3396 | } | |
1da177e4 | 3397 | |
51219358 MW |
3398 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i, |
3399 | lrambyte); | |
27c868c2 | 3400 | |
b59fb6fd | 3401 | seq_printf(m, " %X:%d", i, lrambyte); |
51219358 | 3402 | } |
27c868c2 | 3403 | |
3d30079c | 3404 | seq_puts(m, "\n Command Pending:"); |
51219358 MW |
3405 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3406 | if ((chip_scsi_id == i) || | |
3407 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3408 | continue; | |
3409 | } | |
27c868c2 | 3410 | |
51219358 MW |
3411 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i, |
3412 | lrambyte); | |
1da177e4 | 3413 | |
b59fb6fd | 3414 | seq_printf(m, " %X:%d", i, lrambyte); |
51219358 | 3415 | } |
f50332ff | 3416 | seq_putc(m, '\n'); |
1da177e4 | 3417 | |
51219358 | 3418 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); |
2f979427 | 3419 | seq_puts(m, " Wide Enabled:"); |
51219358 MW |
3420 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3421 | if ((chip_scsi_id == i) || | |
3422 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3423 | continue; | |
27c868c2 | 3424 | } |
51219358 | 3425 | |
b59fb6fd AV |
3426 | seq_printf(m, " %X:%c", |
3427 | i, | |
3428 | (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
27c868c2 | 3429 | } |
f50332ff | 3430 | seq_putc(m, '\n'); |
1da177e4 | 3431 | |
51219358 | 3432 | AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done); |
2f979427 | 3433 | seq_puts(m, " Transfer Bit Width:"); |
51219358 MW |
3434 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3435 | if ((chip_scsi_id == i) || | |
3436 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3437 | continue; | |
3438 | } | |
1da177e4 | 3439 | |
51219358 MW |
3440 | AdvReadWordLram(iop_base, |
3441 | ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), | |
3442 | lramword); | |
27c868c2 | 3443 | |
b59fb6fd AV |
3444 | seq_printf(m, " %X:%d", |
3445 | i, (lramword & 0x8000) ? 16 : 8); | |
27c868c2 | 3446 | |
51219358 MW |
3447 | if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) && |
3448 | (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { | |
f50332ff | 3449 | seq_putc(m, '*'); |
51219358 | 3450 | renegotiate = 1; |
27c868c2 | 3451 | } |
51219358 | 3452 | } |
f50332ff | 3453 | seq_putc(m, '\n'); |
27c868c2 | 3454 | |
51219358 | 3455 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); |
2f979427 | 3456 | seq_puts(m, " Synchronous Enabled:"); |
51219358 MW |
3457 | for (i = 0; i <= ADV_MAX_TID; i++) { |
3458 | if ((chip_scsi_id == i) || | |
3459 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3460 | continue; | |
3461 | } | |
27c868c2 | 3462 | |
b59fb6fd AV |
3463 | seq_printf(m, " %X:%c", |
3464 | i, | |
3465 | (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); | |
51219358 | 3466 | } |
f50332ff | 3467 | seq_putc(m, '\n'); |
27c868c2 | 3468 | |
51219358 MW |
3469 | AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done); |
3470 | for (i = 0; i <= ADV_MAX_TID; i++) { | |
27c868c2 | 3471 | |
51219358 MW |
3472 | AdvReadWordLram(iop_base, |
3473 | ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), | |
3474 | lramword); | |
3475 | lramword &= ~0x8000; | |
27c868c2 | 3476 | |
51219358 MW |
3477 | if ((chip_scsi_id == i) || |
3478 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || | |
3479 | ((sdtr_able & ADV_TID_TO_TIDMASK(i)) == 0)) { | |
3480 | continue; | |
27c868c2 MW |
3481 | } |
3482 | ||
b59fb6fd | 3483 | seq_printf(m, " %X:", i); |
27c868c2 | 3484 | |
51219358 | 3485 | if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */ |
2f979427 | 3486 | seq_puts(m, " Asynchronous"); |
51219358 | 3487 | } else { |
2f979427 | 3488 | seq_puts(m, " Transfer Period Factor: "); |
27c868c2 | 3489 | |
51219358 | 3490 | if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */ |
2f979427 | 3491 | seq_puts(m, "9 (80.0 Mhz),"); |
51219358 | 3492 | } else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */ |
2f979427 | 3493 | seq_puts(m, "10 (40.0 Mhz),"); |
51219358 | 3494 | } else { /* 20 Mhz or below. */ |
27c868c2 | 3495 | |
51219358 MW |
3496 | period = (((lramword >> 8) * 25) + 50) / 4; |
3497 | ||
3498 | if (period == 0) { /* Should never happen. */ | |
31491e1a | 3499 | seq_printf(m, "%d (? Mhz), ", period); |
51219358 | 3500 | } else { |
b59fb6fd AV |
3501 | seq_printf(m, |
3502 | "%d (%d.%d Mhz),", | |
3503 | period, 250 / period, | |
3504 | ASC_TENTHS(250, period)); | |
51219358 MW |
3505 | } |
3506 | } | |
3507 | ||
b59fb6fd AV |
3508 | seq_printf(m, " REQ/ACK Offset: %d", |
3509 | lramword & 0x1F); | |
51219358 MW |
3510 | } |
3511 | ||
3512 | if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { | |
2f979427 | 3513 | seq_puts(m, "*\n"); |
51219358 MW |
3514 | renegotiate = 1; |
3515 | } else { | |
f50332ff | 3516 | seq_putc(m, '\n'); |
51219358 | 3517 | } |
27c868c2 | 3518 | } |
51219358 MW |
3519 | |
3520 | if (renegotiate) { | |
2f979427 | 3521 | seq_puts(m, " * = Re-negotiation pending before next command.\n"); |
51219358 | 3522 | } |
51219358 MW |
3523 | } |
3524 | ||
3525 | #ifdef ADVANSYS_STATS | |
3526 | /* | |
3527 | * asc_prt_board_stats() | |
1da177e4 | 3528 | */ |
b59fb6fd | 3529 | static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 3530 | { |
d2411495 MW |
3531 | struct asc_board *boardp = shost_priv(shost); |
3532 | struct asc_stats *s = &boardp->asc_stats; | |
27c868c2 | 3533 | |
b59fb6fd AV |
3534 | seq_printf(m, |
3535 | "\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n", | |
3536 | shost->host_no); | |
51219358 | 3537 | |
b59fb6fd | 3538 | seq_printf(m, |
31491e1a | 3539 | " queuecommand %u, reset %u, biosparam %u, interrupt %u\n", |
b59fb6fd AV |
3540 | s->queuecommand, s->reset, s->biosparam, |
3541 | s->interrupt); | |
27c868c2 | 3542 | |
b59fb6fd | 3543 | seq_printf(m, |
31491e1a | 3544 | " callback %u, done %u, build_error %u, build_noreq %u, build_nosg %u\n", |
b59fb6fd AV |
3545 | s->callback, s->done, s->build_error, |
3546 | s->adv_build_noreq, s->adv_build_nosg); | |
27c868c2 | 3547 | |
b59fb6fd | 3548 | seq_printf(m, |
31491e1a | 3549 | " exe_noerror %u, exe_busy %u, exe_error %u, exe_unknown %u\n", |
b59fb6fd AV |
3550 | s->exe_noerror, s->exe_busy, s->exe_error, |
3551 | s->exe_unknown); | |
51219358 MW |
3552 | |
3553 | /* | |
3554 | * Display data transfer statistics. | |
3555 | */ | |
52c334e9 | 3556 | if (s->xfer_cnt > 0) { |
31491e1a | 3557 | seq_printf(m, " xfer_cnt %u, xfer_elem %u, ", |
b59fb6fd | 3558 | s->xfer_cnt, s->xfer_elem); |
27c868c2 | 3559 | |
31491e1a | 3560 | seq_printf(m, "xfer_bytes %u.%01u kb\n", |
b59fb6fd | 3561 | s->xfer_sect / 2, ASC_TENTHS(s->xfer_sect, 2)); |
1da177e4 | 3562 | |
51219358 | 3563 | /* Scatter gather transfer statistics */ |
31491e1a | 3564 | seq_printf(m, " avg_num_elem %u.%01u, ", |
b59fb6fd AV |
3565 | s->xfer_elem / s->xfer_cnt, |
3566 | ASC_TENTHS(s->xfer_elem, s->xfer_cnt)); | |
51219358 | 3567 | |
31491e1a | 3568 | seq_printf(m, "avg_elem_size %u.%01u kb, ", |
b59fb6fd AV |
3569 | (s->xfer_sect / 2) / s->xfer_elem, |
3570 | ASC_TENTHS((s->xfer_sect / 2), s->xfer_elem)); | |
51219358 | 3571 | |
31491e1a | 3572 | seq_printf(m, "avg_xfer_size %u.%01u kb\n", |
b59fb6fd AV |
3573 | (s->xfer_sect / 2) / s->xfer_cnt, |
3574 | ASC_TENTHS((s->xfer_sect / 2), s->xfer_cnt)); | |
27c868c2 | 3575 | } |
1da177e4 | 3576 | } |
51219358 | 3577 | #endif /* ADVANSYS_STATS */ |
1da177e4 LT |
3578 | |
3579 | /* | |
b59fb6fd | 3580 | * advansys_show_info() - /proc/scsi/advansys/{0,1,2,3,...} |
1da177e4 | 3581 | * |
b59fb6fd AV |
3582 | * m: seq_file to print into |
3583 | * shost: Scsi_Host | |
1da177e4 | 3584 | * |
51219358 MW |
3585 | * Return the number of bytes read from or written to a |
3586 | * /proc/scsi/advansys/[0...] file. | |
1da177e4 | 3587 | */ |
51219358 | 3588 | static int |
b59fb6fd | 3589 | advansys_show_info(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 | 3590 | { |
d2411495 | 3591 | struct asc_board *boardp = shost_priv(shost); |
27c868c2 | 3592 | |
b352f923 | 3593 | ASC_DBG(1, "begin\n"); |
51219358 | 3594 | |
51219358 MW |
3595 | /* |
3596 | * User read of /proc/scsi/advansys/[0...] file. | |
3597 | */ | |
1da177e4 | 3598 | |
51219358 MW |
3599 | /* |
3600 | * Get board configuration information. | |
3601 | * | |
3602 | * advansys_info() returns the board string from its own static buffer. | |
3603 | */ | |
51219358 | 3604 | /* Copy board information. */ |
b59fb6fd | 3605 | seq_printf(m, "%s\n", (char *)advansys_info(shost)); |
51219358 MW |
3606 | /* |
3607 | * Display Wide Board BIOS Information. | |
3608 | */ | |
b59fb6fd AV |
3609 | if (!ASC_NARROW_BOARD(boardp)) |
3610 | asc_prt_adv_bios(m, shost); | |
1da177e4 | 3611 | |
51219358 MW |
3612 | /* |
3613 | * Display driver information for each device attached to the board. | |
3614 | */ | |
b59fb6fd | 3615 | asc_prt_board_devices(m, shost); |
51219358 MW |
3616 | |
3617 | /* | |
3618 | * Display EEPROM configuration for the board. | |
3619 | */ | |
b59fb6fd AV |
3620 | if (ASC_NARROW_BOARD(boardp)) |
3621 | asc_prt_asc_board_eeprom(m, shost); | |
3622 | else | |
3623 | asc_prt_adv_board_eeprom(m, shost); | |
1da177e4 | 3624 | |
51219358 MW |
3625 | /* |
3626 | * Display driver configuration and information for the board. | |
3627 | */ | |
b59fb6fd | 3628 | asc_prt_driver_conf(m, shost); |
1da177e4 | 3629 | |
51219358 MW |
3630 | #ifdef ADVANSYS_STATS |
3631 | /* | |
3632 | * Display driver statistics for the board. | |
3633 | */ | |
b59fb6fd | 3634 | asc_prt_board_stats(m, shost); |
51219358 | 3635 | #endif /* ADVANSYS_STATS */ |
1da177e4 | 3636 | |
51219358 MW |
3637 | /* |
3638 | * Display Asc Library dynamic configuration information | |
3639 | * for the board. | |
3640 | */ | |
b59fb6fd AV |
3641 | if (ASC_NARROW_BOARD(boardp)) |
3642 | asc_prt_asc_board_info(m, shost); | |
3643 | else | |
3644 | asc_prt_adv_board_info(m, shost); | |
3645 | return 0; | |
51219358 MW |
3646 | } |
3647 | #endif /* CONFIG_PROC_FS */ | |
3648 | ||
3649 | static void asc_scsi_done(struct scsi_cmnd *scp) | |
3650 | { | |
52c334e9 | 3651 | scsi_dma_unmap(scp); |
51219358 | 3652 | ASC_STATS(scp->device->host, done); |
51219358 MW |
3653 | scp->scsi_done(scp); |
3654 | } | |
3655 | ||
3656 | static void AscSetBank(PortAddr iop_base, uchar bank) | |
3657 | { | |
3658 | uchar val; | |
3659 | ||
3660 | val = AscGetChipControl(iop_base) & | |
3661 | (~ | |
3662 | (CC_SINGLE_STEP | CC_TEST | CC_DIAG | CC_SCSI_RESET | | |
3663 | CC_CHIP_RESET)); | |
3664 | if (bank == 1) { | |
3665 | val |= CC_BANK_ONE; | |
3666 | } else if (bank == 2) { | |
3667 | val |= CC_DIAG | CC_BANK_ONE; | |
27c868c2 | 3668 | } else { |
51219358 | 3669 | val &= ~CC_BANK_ONE; |
27c868c2 | 3670 | } |
51219358 | 3671 | AscSetChipControl(iop_base, val); |
51219358 MW |
3672 | } |
3673 | ||
3674 | static void AscSetChipIH(PortAddr iop_base, ushort ins_code) | |
3675 | { | |
3676 | AscSetBank(iop_base, 1); | |
3677 | AscWriteChipIH(iop_base, ins_code); | |
3678 | AscSetBank(iop_base, 0); | |
51219358 MW |
3679 | } |
3680 | ||
3681 | static int AscStartChip(PortAddr iop_base) | |
3682 | { | |
3683 | AscSetChipControl(iop_base, 0); | |
3684 | if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { | |
3685 | return (0); | |
27c868c2 | 3686 | } |
51219358 MW |
3687 | return (1); |
3688 | } | |
27c868c2 | 3689 | |
ae26759e | 3690 | static bool AscStopChip(PortAddr iop_base) |
51219358 MW |
3691 | { |
3692 | uchar cc_val; | |
3693 | ||
3694 | cc_val = | |
3695 | AscGetChipControl(iop_base) & | |
3696 | (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG)); | |
3697 | AscSetChipControl(iop_base, (uchar)(cc_val | CC_HALT)); | |
3698 | AscSetChipIH(iop_base, INS_HALT); | |
3699 | AscSetChipIH(iop_base, INS_RFLAG_WTM); | |
3700 | if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) { | |
ae26759e | 3701 | return false; |
27c868c2 | 3702 | } |
ae26759e | 3703 | return true; |
51219358 | 3704 | } |
27c868c2 | 3705 | |
d647c783 | 3706 | static bool AscIsChipHalted(PortAddr iop_base) |
51219358 MW |
3707 | { |
3708 | if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { | |
3709 | if ((AscGetChipControl(iop_base) & CC_HALT) != 0) { | |
d647c783 | 3710 | return true; |
27c868c2 | 3711 | } |
27c868c2 | 3712 | } |
d647c783 | 3713 | return false; |
51219358 | 3714 | } |
27c868c2 | 3715 | |
d647c783 | 3716 | static bool AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
3717 | { |
3718 | PortAddr iop_base; | |
3719 | int i = 10; | |
3720 | ||
3721 | iop_base = asc_dvc->iop_base; | |
3722 | while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE) | |
3723 | && (i-- > 0)) { | |
3724 | mdelay(100); | |
27c868c2 | 3725 | } |
51219358 MW |
3726 | AscStopChip(iop_base); |
3727 | AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT); | |
3728 | udelay(60); | |
3729 | AscSetChipIH(iop_base, INS_RFLAG_WTM); | |
3730 | AscSetChipIH(iop_base, INS_HALT); | |
3731 | AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT); | |
3732 | AscSetChipControl(iop_base, CC_HALT); | |
3733 | mdelay(200); | |
3734 | AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); | |
3735 | AscSetChipStatus(iop_base, 0); | |
3736 | return (AscIsChipHalted(iop_base)); | |
3737 | } | |
27c868c2 | 3738 | |
51219358 MW |
3739 | static int AscFindSignature(PortAddr iop_base) |
3740 | { | |
3741 | ushort sig_word; | |
27c868c2 | 3742 | |
b352f923 | 3743 | ASC_DBG(1, "AscGetChipSignatureByte(0x%x) 0x%x\n", |
51219358 MW |
3744 | iop_base, AscGetChipSignatureByte(iop_base)); |
3745 | if (AscGetChipSignatureByte(iop_base) == (uchar)ASC_1000_ID1B) { | |
b352f923 | 3746 | ASC_DBG(1, "AscGetChipSignatureWord(0x%x) 0x%x\n", |
51219358 MW |
3747 | iop_base, AscGetChipSignatureWord(iop_base)); |
3748 | sig_word = AscGetChipSignatureWord(iop_base); | |
3749 | if ((sig_word == (ushort)ASC_1000_ID0W) || | |
3750 | (sig_word == (ushort)ASC_1000_ID0W_FIX)) { | |
3751 | return (1); | |
27c868c2 | 3752 | } |
27c868c2 | 3753 | } |
51219358 | 3754 | return (0); |
27c868c2 MW |
3755 | } |
3756 | ||
51219358 | 3757 | static void AscEnableInterrupt(PortAddr iop_base) |
1da177e4 | 3758 | { |
51219358 | 3759 | ushort cfg; |
27c868c2 | 3760 | |
51219358 MW |
3761 | cfg = AscGetChipCfgLsw(iop_base); |
3762 | AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON); | |
51219358 | 3763 | } |
27c868c2 | 3764 | |
51219358 MW |
3765 | static void AscDisableInterrupt(PortAddr iop_base) |
3766 | { | |
3767 | ushort cfg; | |
27c868c2 | 3768 | |
51219358 MW |
3769 | cfg = AscGetChipCfgLsw(iop_base); |
3770 | AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON)); | |
51219358 | 3771 | } |
27c868c2 | 3772 | |
51219358 MW |
3773 | static uchar AscReadLramByte(PortAddr iop_base, ushort addr) |
3774 | { | |
3775 | unsigned char byte_data; | |
3776 | unsigned short word_data; | |
27c868c2 | 3777 | |
51219358 MW |
3778 | if (isodd_word(addr)) { |
3779 | AscSetChipLramAddr(iop_base, addr - 1); | |
3780 | word_data = AscGetChipLramData(iop_base); | |
3781 | byte_data = (word_data >> 8) & 0xFF; | |
3782 | } else { | |
3783 | AscSetChipLramAddr(iop_base, addr); | |
3784 | word_data = AscGetChipLramData(iop_base); | |
3785 | byte_data = word_data & 0xFF; | |
3786 | } | |
3787 | return byte_data; | |
3788 | } | |
27c868c2 | 3789 | |
51219358 MW |
3790 | static ushort AscReadLramWord(PortAddr iop_base, ushort addr) |
3791 | { | |
3792 | ushort word_data; | |
27c868c2 | 3793 | |
51219358 MW |
3794 | AscSetChipLramAddr(iop_base, addr); |
3795 | word_data = AscGetChipLramData(iop_base); | |
3796 | return (word_data); | |
3797 | } | |
27c868c2 | 3798 | |
51219358 MW |
3799 | static void |
3800 | AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words) | |
3801 | { | |
3802 | int i; | |
3803 | ||
3804 | AscSetChipLramAddr(iop_base, s_addr); | |
3805 | for (i = 0; i < words; i++) { | |
3806 | AscSetChipLramData(iop_base, set_wval); | |
27c868c2 | 3807 | } |
51219358 | 3808 | } |
1da177e4 | 3809 | |
51219358 MW |
3810 | static void AscWriteLramWord(PortAddr iop_base, ushort addr, ushort word_val) |
3811 | { | |
3812 | AscSetChipLramAddr(iop_base, addr); | |
3813 | AscSetChipLramData(iop_base, word_val); | |
51219358 MW |
3814 | } |
3815 | ||
3816 | static void AscWriteLramByte(PortAddr iop_base, ushort addr, uchar byte_val) | |
3817 | { | |
3818 | ushort word_data; | |
3819 | ||
3820 | if (isodd_word(addr)) { | |
3821 | addr--; | |
3822 | word_data = AscReadLramWord(iop_base, addr); | |
3823 | word_data &= 0x00FF; | |
3824 | word_data |= (((ushort)byte_val << 8) & 0xFF00); | |
3825 | } else { | |
3826 | word_data = AscReadLramWord(iop_base, addr); | |
3827 | word_data &= 0xFF00; | |
3828 | word_data |= ((ushort)byte_val & 0x00FF); | |
3829 | } | |
3830 | AscWriteLramWord(iop_base, addr, word_data); | |
1da177e4 LT |
3831 | } |
3832 | ||
3833 | /* | |
51219358 | 3834 | * Copy 2 bytes to LRAM. |
1da177e4 | 3835 | * |
51219358 MW |
3836 | * The source data is assumed to be in little-endian order in memory |
3837 | * and is maintained in little-endian order when written to LRAM. | |
1da177e4 | 3838 | */ |
51219358 | 3839 | static void |
989bb5f5 JSR |
3840 | AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr, |
3841 | const uchar *s_buffer, int words) | |
1da177e4 | 3842 | { |
27c868c2 | 3843 | int i; |
27c868c2 | 3844 | |
51219358 MW |
3845 | AscSetChipLramAddr(iop_base, s_addr); |
3846 | for (i = 0; i < 2 * words; i += 2) { | |
3847 | /* | |
3848 | * On a little-endian system the second argument below | |
3849 | * produces a little-endian ushort which is written to | |
3850 | * LRAM in little-endian order. On a big-endian system | |
3851 | * the second argument produces a big-endian ushort which | |
3852 | * is "transparently" byte-swapped by outpw() and written | |
3853 | * in little-endian order to LRAM. | |
3854 | */ | |
3855 | outpw(iop_base + IOP_RAM_DATA, | |
3856 | ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); | |
3857 | } | |
51219358 | 3858 | } |
27c868c2 | 3859 | |
51219358 MW |
3860 | /* |
3861 | * Copy 4 bytes to LRAM. | |
3862 | * | |
3863 | * The source data is assumed to be in little-endian order in memory | |
25985edc | 3864 | * and is maintained in little-endian order when written to LRAM. |
51219358 MW |
3865 | */ |
3866 | static void | |
3867 | AscMemDWordCopyPtrToLram(PortAddr iop_base, | |
3868 | ushort s_addr, uchar *s_buffer, int dwords) | |
3869 | { | |
3870 | int i; | |
27c868c2 | 3871 | |
51219358 MW |
3872 | AscSetChipLramAddr(iop_base, s_addr); |
3873 | for (i = 0; i < 4 * dwords; i += 4) { | |
3874 | outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); /* LSW */ | |
3875 | outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 3] << 8) | s_buffer[i + 2]); /* MSW */ | |
3876 | } | |
51219358 | 3877 | } |
27c868c2 | 3878 | |
51219358 MW |
3879 | /* |
3880 | * Copy 2 bytes from LRAM. | |
3881 | * | |
3882 | * The source data is assumed to be in little-endian order in LRAM | |
3883 | * and is maintained in little-endian order when written to memory. | |
3884 | */ | |
3885 | static void | |
3886 | AscMemWordCopyPtrFromLram(PortAddr iop_base, | |
3887 | ushort s_addr, uchar *d_buffer, int words) | |
3888 | { | |
3889 | int i; | |
3890 | ushort word; | |
27c868c2 | 3891 | |
51219358 MW |
3892 | AscSetChipLramAddr(iop_base, s_addr); |
3893 | for (i = 0; i < 2 * words; i += 2) { | |
3894 | word = inpw(iop_base + IOP_RAM_DATA); | |
3895 | d_buffer[i] = word & 0xff; | |
3896 | d_buffer[i + 1] = (word >> 8) & 0xff; | |
27c868c2 | 3897 | } |
51219358 | 3898 | } |
27c868c2 | 3899 | |
95cfab6c | 3900 | static u32 AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words) |
51219358 | 3901 | { |
95cfab6c | 3902 | u32 sum = 0; |
51219358 | 3903 | int i; |
27c868c2 | 3904 | |
51219358 MW |
3905 | for (i = 0; i < words; i++, s_addr += 2) { |
3906 | sum += AscReadLramWord(iop_base, s_addr); | |
27c868c2 | 3907 | } |
51219358 MW |
3908 | return (sum); |
3909 | } | |
27c868c2 | 3910 | |
f33134e5 | 3911 | static void AscInitLram(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
3912 | { |
3913 | uchar i; | |
3914 | ushort s_addr; | |
3915 | PortAddr iop_base; | |
27c868c2 | 3916 | |
51219358 | 3917 | iop_base = asc_dvc->iop_base; |
51219358 MW |
3918 | AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0, |
3919 | (ushort)(((int)(asc_dvc->max_total_qng + 2 + 1) * | |
3920 | 64) >> 1)); | |
3921 | i = ASC_MIN_ACTIVE_QNO; | |
3922 | s_addr = ASC_QADR_BEG + ASC_QBLK_SIZE; | |
3923 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), | |
3924 | (uchar)(i + 1)); | |
3925 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), | |
3926 | (uchar)(asc_dvc->max_total_qng)); | |
3927 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), | |
3928 | (uchar)i); | |
3929 | i++; | |
3930 | s_addr += ASC_QBLK_SIZE; | |
3931 | for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE) { | |
3932 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), | |
3933 | (uchar)(i + 1)); | |
3934 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), | |
3935 | (uchar)(i - 1)); | |
3936 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), | |
3937 | (uchar)i); | |
27c868c2 | 3938 | } |
51219358 MW |
3939 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), |
3940 | (uchar)ASC_QLINK_END); | |
3941 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), | |
3942 | (uchar)(asc_dvc->max_total_qng - 1)); | |
3943 | AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), | |
3944 | (uchar)asc_dvc->max_total_qng); | |
3945 | i++; | |
3946 | s_addr += ASC_QBLK_SIZE; | |
3947 | for (; i <= (uchar)(asc_dvc->max_total_qng + 3); | |
3948 | i++, s_addr += ASC_QBLK_SIZE) { | |
3949 | AscWriteLramByte(iop_base, | |
3950 | (ushort)(s_addr + (ushort)ASC_SCSIQ_B_FWD), i); | |
3951 | AscWriteLramByte(iop_base, | |
3952 | (ushort)(s_addr + (ushort)ASC_SCSIQ_B_BWD), i); | |
3953 | AscWriteLramByte(iop_base, | |
3954 | (ushort)(s_addr + (ushort)ASC_SCSIQ_B_QNO), i); | |
27c868c2 | 3955 | } |
1da177e4 LT |
3956 | } |
3957 | ||
95cfab6c | 3958 | static u32 |
989bb5f5 JSR |
3959 | AscLoadMicroCode(PortAddr iop_base, ushort s_addr, |
3960 | const uchar *mcode_buf, ushort mcode_size) | |
1da177e4 | 3961 | { |
95cfab6c | 3962 | u32 chksum; |
51219358 MW |
3963 | ushort mcode_word_size; |
3964 | ushort mcode_chksum; | |
27c868c2 | 3965 | |
51219358 MW |
3966 | /* Write the microcode buffer starting at LRAM address 0. */ |
3967 | mcode_word_size = (ushort)(mcode_size >> 1); | |
3968 | AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size); | |
3969 | AscMemWordCopyPtrToLram(iop_base, s_addr, mcode_buf, mcode_word_size); | |
27c868c2 | 3970 | |
51219358 | 3971 | chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size); |
b352f923 | 3972 | ASC_DBG(1, "chksum 0x%lx\n", (ulong)chksum); |
51219358 MW |
3973 | mcode_chksum = (ushort)AscMemSumLramWord(iop_base, |
3974 | (ushort)ASC_CODE_SEC_BEG, | |
3975 | (ushort)((mcode_size - | |
3976 | s_addr - (ushort) | |
3977 | ASC_CODE_SEC_BEG) / | |
3978 | 2)); | |
b352f923 | 3979 | ASC_DBG(1, "mcode_chksum 0x%lx\n", (ulong)mcode_chksum); |
51219358 MW |
3980 | AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W, mcode_chksum); |
3981 | AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W, mcode_size); | |
b352f923 | 3982 | return chksum; |
51219358 | 3983 | } |
27c868c2 | 3984 | |
51219358 MW |
3985 | static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) |
3986 | { | |
3987 | PortAddr iop_base; | |
3988 | int i; | |
3989 | ushort lram_addr; | |
3990 | ||
3991 | iop_base = asc_dvc->iop_base; | |
3992 | AscPutRiscVarFreeQHead(iop_base, 1); | |
3993 | AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng); | |
3994 | AscPutVarFreeQHead(iop_base, 1); | |
3995 | AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng); | |
3996 | AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B, | |
3997 | (uchar)((int)asc_dvc->max_total_qng + 1)); | |
3998 | AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B, | |
3999 | (uchar)((int)asc_dvc->max_total_qng + 2)); | |
4000 | AscWriteLramByte(iop_base, (ushort)ASCV_TOTAL_READY_Q_B, | |
4001 | asc_dvc->max_total_qng); | |
4002 | AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W, 0); | |
4003 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
4004 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 0); | |
4005 | AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B, 0); | |
4006 | AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B, 0); | |
4007 | AscPutQDoneInProgress(iop_base, 0); | |
4008 | lram_addr = ASC_QADR_BEG; | |
4009 | for (i = 0; i < 32; i++, lram_addr += 2) { | |
4010 | AscWriteLramWord(iop_base, lram_addr, 0); | |
4011 | } | |
4012 | } | |
4013 | ||
f33134e5 | 4014 | static int AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
4015 | { |
4016 | int i; | |
f33134e5 | 4017 | int warn_code; |
51219358 | 4018 | PortAddr iop_base; |
95cfab6c HR |
4019 | __le32 phy_addr; |
4020 | __le32 phy_size; | |
d10fb2c7 | 4021 | struct asc_board *board = asc_dvc_to_board(asc_dvc); |
51219358 MW |
4022 | |
4023 | iop_base = asc_dvc->iop_base; | |
4024 | warn_code = 0; | |
4025 | for (i = 0; i <= ASC_MAX_TID; i++) { | |
4026 | AscPutMCodeInitSDTRAtID(iop_base, i, | |
4027 | asc_dvc->cfg->sdtr_period_offset[i]); | |
4028 | } | |
4029 | ||
4030 | AscInitQLinkVar(asc_dvc); | |
4031 | AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B, | |
4032 | asc_dvc->cfg->disc_enable); | |
4033 | AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B, | |
4034 | ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id)); | |
4035 | ||
d10fb2c7 MW |
4036 | /* Ensure overrun buffer is aligned on an 8 byte boundary. */ |
4037 | BUG_ON((unsigned long)asc_dvc->overrun_buf & 7); | |
4038 | asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf, | |
4039 | ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); | |
9a908c1a HRK |
4040 | if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) { |
4041 | warn_code = -ENOMEM; | |
4042 | goto err_dma_map; | |
4043 | } | |
d10fb2c7 | 4044 | phy_addr = cpu_to_le32(asc_dvc->overrun_dma); |
51219358 MW |
4045 | AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D, |
4046 | (uchar *)&phy_addr, 1); | |
d10fb2c7 | 4047 | phy_size = cpu_to_le32(ASC_OVERRUN_BSIZE); |
51219358 MW |
4048 | AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_BSIZE_D, |
4049 | (uchar *)&phy_size, 1); | |
4050 | ||
4051 | asc_dvc->cfg->mcode_date = | |
4052 | AscReadLramWord(iop_base, (ushort)ASCV_MC_DATE_W); | |
4053 | asc_dvc->cfg->mcode_version = | |
4054 | AscReadLramWord(iop_base, (ushort)ASCV_MC_VER_W); | |
4055 | ||
4056 | AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); | |
4057 | if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { | |
4058 | asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; | |
f33134e5 | 4059 | warn_code = -EINVAL; |
9a908c1a | 4060 | goto err_mcode_start; |
51219358 MW |
4061 | } |
4062 | if (AscStartChip(iop_base) != 1) { | |
4063 | asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; | |
f33134e5 | 4064 | warn_code = -EIO; |
9a908c1a | 4065 | goto err_mcode_start; |
51219358 MW |
4066 | } |
4067 | ||
4068 | return warn_code; | |
9a908c1a HRK |
4069 | |
4070 | err_mcode_start: | |
4071 | dma_unmap_single(board->dev, asc_dvc->overrun_dma, | |
4072 | ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); | |
4073 | err_dma_map: | |
4074 | asc_dvc->overrun_dma = 0; | |
4075 | return warn_code; | |
51219358 MW |
4076 | } |
4077 | ||
f33134e5 | 4078 | static int AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) |
51219358 | 4079 | { |
989bb5f5 JSR |
4080 | const struct firmware *fw; |
4081 | const char fwname[] = "advansys/mcode.bin"; | |
4082 | int err; | |
4083 | unsigned long chksum; | |
f33134e5 | 4084 | int warn_code; |
51219358 MW |
4085 | PortAddr iop_base; |
4086 | ||
4087 | iop_base = asc_dvc->iop_base; | |
4088 | warn_code = 0; | |
4089 | if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI) && | |
4090 | !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE)) { | |
4091 | AscResetChipAndScsiBus(asc_dvc); | |
4092 | mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ | |
4093 | } | |
4094 | asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC; | |
4095 | if (asc_dvc->err_code != 0) | |
f33134e5 | 4096 | return ASC_ERROR; |
51219358 MW |
4097 | if (!AscFindSignature(asc_dvc->iop_base)) { |
4098 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; | |
4099 | return warn_code; | |
4100 | } | |
4101 | AscDisableInterrupt(iop_base); | |
f33134e5 | 4102 | AscInitLram(asc_dvc); |
989bb5f5 JSR |
4103 | |
4104 | err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); | |
4105 | if (err) { | |
4106 | printk(KERN_ERR "Failed to load image \"%s\" err %d\n", | |
4107 | fwname, err); | |
cf747445 | 4108 | asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4109 | return err; |
4110 | } | |
4111 | if (fw->size < 4) { | |
4112 | printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", | |
4113 | fw->size, fwname); | |
4114 | release_firmware(fw); | |
cf747445 | 4115 | asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4116 | return -EINVAL; |
4117 | } | |
4118 | chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | | |
4119 | (fw->data[1] << 8) | fw->data[0]; | |
4120 | ASC_DBG(1, "_asc_mcode_chksum 0x%lx\n", (ulong)chksum); | |
4121 | if (AscLoadMicroCode(iop_base, 0, &fw->data[4], | |
4122 | fw->size - 4) != chksum) { | |
51219358 | 4123 | asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; |
989bb5f5 | 4124 | release_firmware(fw); |
51219358 MW |
4125 | return warn_code; |
4126 | } | |
989bb5f5 | 4127 | release_firmware(fw); |
51219358 | 4128 | warn_code |= AscInitMicroCodeVar(asc_dvc); |
9a908c1a HRK |
4129 | if (!asc_dvc->overrun_dma) |
4130 | return warn_code; | |
51219358 MW |
4131 | asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC; |
4132 | AscEnableInterrupt(iop_base); | |
4133 | return warn_code; | |
4134 | } | |
4135 | ||
4136 | /* | |
4137 | * Load the Microcode | |
4138 | * | |
4139 | * Write the microcode image to RISC memory starting at address 0. | |
4140 | * | |
4141 | * The microcode is stored compressed in the following format: | |
4142 | * | |
4143 | * 254 word (508 byte) table indexed by byte code followed | |
4144 | * by the following byte codes: | |
4145 | * | |
4146 | * 1-Byte Code: | |
4147 | * 00: Emit word 0 in table. | |
4148 | * 01: Emit word 1 in table. | |
4149 | * . | |
4150 | * FD: Emit word 253 in table. | |
4151 | * | |
4152 | * Multi-Byte Code: | |
4153 | * FE WW WW: (3 byte code) Word to emit is the next word WW WW. | |
4154 | * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW. | |
4155 | * | |
4156 | * Returns 0 or an error if the checksum doesn't match | |
4157 | */ | |
989bb5f5 JSR |
4158 | static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf, |
4159 | int size, int memsize, int chksum) | |
51219358 MW |
4160 | { |
4161 | int i, j, end, len = 0; | |
95cfab6c | 4162 | u32 sum; |
51219358 MW |
4163 | |
4164 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); | |
4165 | ||
4166 | for (i = 253 * 2; i < size; i++) { | |
4167 | if (buf[i] == 0xff) { | |
4168 | unsigned short word = (buf[i + 3] << 8) | buf[i + 2]; | |
4169 | for (j = 0; j < buf[i + 1]; j++) { | |
4170 | AdvWriteWordAutoIncLram(iop_base, word); | |
4171 | len += 2; | |
4172 | } | |
4173 | i += 3; | |
4174 | } else if (buf[i] == 0xfe) { | |
4175 | unsigned short word = (buf[i + 2] << 8) | buf[i + 1]; | |
4176 | AdvWriteWordAutoIncLram(iop_base, word); | |
4177 | i += 2; | |
4178 | len += 2; | |
4179 | } else { | |
951b62c1 | 4180 | unsigned int off = buf[i] * 2; |
51219358 MW |
4181 | unsigned short word = (buf[off + 1] << 8) | buf[off]; |
4182 | AdvWriteWordAutoIncLram(iop_base, word); | |
4183 | len += 2; | |
4184 | } | |
4185 | } | |
4186 | ||
4187 | end = len; | |
4188 | ||
4189 | while (len < memsize) { | |
4190 | AdvWriteWordAutoIncLram(iop_base, 0); | |
4191 | len += 2; | |
4192 | } | |
4193 | ||
4194 | /* Verify the microcode checksum. */ | |
4195 | sum = 0; | |
4196 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); | |
4197 | ||
4198 | for (len = 0; len < end; len += 2) { | |
4199 | sum += AdvReadWordAutoIncLram(iop_base); | |
4200 | } | |
4201 | ||
4202 | if (sum != chksum) | |
4203 | return ASC_IERR_MCODE_CHKSUM; | |
4204 | ||
4205 | return 0; | |
4206 | } | |
4207 | ||
98b96a7d | 4208 | static void AdvBuildCarrierFreelist(struct adv_dvc_var *adv_dvc) |
51219358 | 4209 | { |
98b96a7d HR |
4210 | off_t carr_offset = 0, next_offset; |
4211 | dma_addr_t carr_paddr; | |
4212 | int carr_num = ADV_CARRIER_BUFSIZE / sizeof(ADV_CARR_T), i; | |
51219358 | 4213 | |
98b96a7d HR |
4214 | for (i = 0; i < carr_num; i++) { |
4215 | carr_offset = i * sizeof(ADV_CARR_T); | |
4216 | /* Get physical address of the carrier 'carrp'. */ | |
4217 | carr_paddr = adv_dvc->carrier_addr + carr_offset; | |
4218 | ||
4219 | adv_dvc->carrier[i].carr_pa = cpu_to_le32(carr_paddr); | |
4220 | adv_dvc->carrier[i].carr_va = cpu_to_le32(carr_offset); | |
4221 | adv_dvc->carrier[i].areq_vpa = 0; | |
4222 | next_offset = carr_offset + sizeof(ADV_CARR_T); | |
4223 | if (i == carr_num) | |
4224 | next_offset = ~0; | |
4225 | adv_dvc->carrier[i].next_vpa = cpu_to_le32(next_offset); | |
51219358 | 4226 | } |
98b96a7d HR |
4227 | /* |
4228 | * We cannot have a carrier with 'carr_va' of '0', as | |
4229 | * a reference to this carrier would be interpreted as | |
4230 | * list termination. | |
4231 | * So start at carrier 1 with the freelist. | |
4232 | */ | |
4233 | adv_dvc->carr_freelist = &adv_dvc->carrier[1]; | |
4234 | } | |
51219358 | 4235 | |
98b96a7d HR |
4236 | static ADV_CARR_T *adv_get_carrier(struct adv_dvc_var *adv_dvc, u32 offset) |
4237 | { | |
4238 | int index; | |
51219358 | 4239 | |
98b96a7d | 4240 | BUG_ON(offset > ADV_CARRIER_BUFSIZE); |
51219358 | 4241 | |
98b96a7d HR |
4242 | index = offset / sizeof(ADV_CARR_T); |
4243 | return &adv_dvc->carrier[index]; | |
4244 | } | |
51219358 | 4245 | |
98b96a7d HR |
4246 | static ADV_CARR_T *adv_get_next_carrier(struct adv_dvc_var *adv_dvc) |
4247 | { | |
4248 | ADV_CARR_T *carrp = adv_dvc->carr_freelist; | |
4249 | u32 next_vpa = le32_to_cpu(carrp->next_vpa); | |
4250 | ||
4251 | if (next_vpa == 0 || next_vpa == ~0) { | |
4252 | ASC_DBG(1, "invalid vpa offset 0x%x\n", next_vpa); | |
4253 | return NULL; | |
4254 | } | |
51219358 | 4255 | |
98b96a7d HR |
4256 | adv_dvc->carr_freelist = adv_get_carrier(adv_dvc, next_vpa); |
4257 | /* | |
4258 | * insert stopper carrier to terminate list | |
4259 | */ | |
084e6c36 | 4260 | carrp->next_vpa = cpu_to_le32(ADV_CQ_STOPPER); |
98b96a7d HR |
4261 | |
4262 | return carrp; | |
51219358 MW |
4263 | } |
4264 | ||
4b47e464 HR |
4265 | /* |
4266 | * 'offset' is the index in the request pointer array | |
4267 | */ | |
4268 | static adv_req_t * adv_get_reqp(struct adv_dvc_var *adv_dvc, u32 offset) | |
4269 | { | |
4270 | struct asc_board *boardp = adv_dvc->drv_ptr; | |
4271 | ||
4272 | BUG_ON(offset > adv_dvc->max_host_qng); | |
4273 | return &boardp->adv_reqp[offset]; | |
4274 | } | |
4275 | ||
51219358 MW |
4276 | /* |
4277 | * Send an idle command to the chip and wait for completion. | |
4278 | * | |
4279 | * Command completion is polled for once per microsecond. | |
4280 | * | |
4281 | * The function can be called from anywhere including an interrupt handler. | |
4282 | * But the function is not re-entrant, so it uses the DvcEnter/LeaveCritical() | |
4283 | * functions to prevent reentrancy. | |
4284 | * | |
4285 | * Return Values: | |
4286 | * ADV_TRUE - command completed successfully | |
4287 | * ADV_FALSE - command failed | |
4288 | * ADV_ERROR - command timed out | |
4289 | */ | |
4290 | static int | |
4291 | AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, | |
95cfab6c | 4292 | ushort idle_cmd, u32 idle_cmd_parameter) |
51219358 | 4293 | { |
95cfab6c | 4294 | int result, i, j; |
51219358 MW |
4295 | AdvPortAddr iop_base; |
4296 | ||
4297 | iop_base = asc_dvc->iop_base; | |
4298 | ||
4299 | /* | |
4300 | * Clear the idle command status which is set by the microcode | |
4301 | * to a non-zero value to indicate when the command is completed. | |
4302 | * The non-zero result is one of the IDLE_CMD_STATUS_* values | |
4303 | */ | |
4304 | AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0); | |
4305 | ||
4306 | /* | |
4307 | * Write the idle command value after the idle command parameter | |
4308 | * has been written to avoid a race condition. If the order is not | |
4309 | * followed, the microcode may process the idle command before the | |
4310 | * parameters have been written to LRAM. | |
4311 | */ | |
4312 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IDLE_CMD_PARAMETER, | |
4313 | cpu_to_le32(idle_cmd_parameter)); | |
4314 | AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd); | |
4315 | ||
4316 | /* | |
4317 | * Tickle the RISC to tell it to process the idle command. | |
4318 | */ | |
4319 | AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_B); | |
4320 | if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { | |
4321 | /* | |
4322 | * Clear the tickle value. In the ASC-3550 the RISC flag | |
4323 | * command 'clr_tickle_b' does not work unless the host | |
4324 | * value is cleared. | |
4325 | */ | |
4326 | AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP); | |
4327 | } | |
4328 | ||
4329 | /* Wait for up to 100 millisecond for the idle command to timeout. */ | |
4330 | for (i = 0; i < SCSI_WAIT_100_MSEC; i++) { | |
4331 | /* Poll once each microsecond for command completion. */ | |
4332 | for (j = 0; j < SCSI_US_PER_MSEC; j++) { | |
4333 | AdvReadWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, | |
4334 | result); | |
4335 | if (result != 0) | |
4336 | return result; | |
4337 | udelay(1); | |
4338 | } | |
4339 | } | |
4340 | ||
4341 | BUG(); /* The idle command should never timeout. */ | |
4342 | return ADV_ERROR; | |
4343 | } | |
4344 | ||
4345 | /* | |
4346 | * Reset SCSI Bus and purge all outstanding requests. | |
4347 | * | |
4348 | * Return Value: | |
4349 | * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset. | |
4350 | * ADV_FALSE(0) - Microcode command failed. | |
4351 | * ADV_ERROR(-1) - Microcode command timed-out. Microcode or IC | |
4352 | * may be hung which requires driver recovery. | |
4353 | */ | |
4354 | static int AdvResetSB(ADV_DVC_VAR *asc_dvc) | |
4355 | { | |
4356 | int status; | |
4357 | ||
4358 | /* | |
4359 | * Send the SCSI Bus Reset idle start idle command which asserts | |
4360 | * the SCSI Bus Reset signal. | |
4361 | */ | |
4362 | status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_START, 0L); | |
4363 | if (status != ADV_TRUE) { | |
4364 | return status; | |
4365 | } | |
4366 | ||
4367 | /* | |
4368 | * Delay for the specified SCSI Bus Reset hold time. | |
4369 | * | |
4370 | * The hold time delay is done on the host because the RISC has no | |
4371 | * microsecond accurate timer. | |
4372 | */ | |
4373 | udelay(ASC_SCSI_RESET_HOLD_TIME_US); | |
4374 | ||
4375 | /* | |
4376 | * Send the SCSI Bus Reset end idle command which de-asserts | |
4377 | * the SCSI Bus Reset signal and purges any pending requests. | |
4378 | */ | |
4379 | status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_END, 0L); | |
4380 | if (status != ADV_TRUE) { | |
4381 | return status; | |
4382 | } | |
4383 | ||
4384 | mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ | |
4385 | ||
4386 | return status; | |
4387 | } | |
4388 | ||
4389 | /* | |
4390 | * Initialize the ASC-3550. | |
4391 | * | |
4392 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. | |
4393 | * | |
4394 | * For a non-fatal error return a warning code. If there are no warnings | |
4395 | * then 0 is returned. | |
4396 | * | |
4397 | * Needed after initialization for error recovery. | |
4398 | */ | |
4399 | static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) | |
4400 | { | |
989bb5f5 JSR |
4401 | const struct firmware *fw; |
4402 | const char fwname[] = "advansys/3550.bin"; | |
51219358 MW |
4403 | AdvPortAddr iop_base; |
4404 | ushort warn_code; | |
4405 | int begin_addr; | |
4406 | int end_addr; | |
4407 | ushort code_sum; | |
4408 | int word; | |
4409 | int i; | |
989bb5f5 JSR |
4410 | int err; |
4411 | unsigned long chksum; | |
51219358 MW |
4412 | ushort scsi_cfg1; |
4413 | uchar tid; | |
4414 | ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ | |
4415 | ushort wdtr_able = 0, sdtr_able, tagqng_able; | |
4416 | uchar max_cmd[ADV_MAX_TID + 1]; | |
4417 | ||
4418 | /* If there is already an error, don't continue. */ | |
4419 | if (asc_dvc->err_code != 0) | |
4420 | return ADV_ERROR; | |
4421 | ||
4422 | /* | |
4423 | * The caller must set 'chip_type' to ADV_CHIP_ASC3550. | |
4424 | */ | |
4425 | if (asc_dvc->chip_type != ADV_CHIP_ASC3550) { | |
4426 | asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; | |
4427 | return ADV_ERROR; | |
4428 | } | |
4429 | ||
4430 | warn_code = 0; | |
4431 | iop_base = asc_dvc->iop_base; | |
4432 | ||
4433 | /* | |
4434 | * Save the RISC memory BIOS region before writing the microcode. | |
4435 | * The BIOS may already be loaded and using its RISC LRAM region | |
4436 | * so its region must be saved and restored. | |
4437 | * | |
4438 | * Note: This code makes the assumption, which is currently true, | |
4439 | * that a chip reset does not clear RISC LRAM. | |
4440 | */ | |
4441 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
4442 | AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
4443 | bios_mem[i]); | |
4444 | } | |
4445 | ||
4446 | /* | |
4447 | * Save current per TID negotiated values. | |
4448 | */ | |
4449 | if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 0x55AA) { | |
4450 | ushort bios_version, major, minor; | |
4451 | ||
4452 | bios_version = | |
4453 | bios_mem[(ASC_MC_BIOS_VERSION - ASC_MC_BIOSMEM) / 2]; | |
4454 | major = (bios_version >> 12) & 0xF; | |
4455 | minor = (bios_version >> 8) & 0xF; | |
4456 | if (major < 3 || (major == 3 && minor == 1)) { | |
4457 | /* BIOS 3.1 and earlier location of 'wdtr_able' variable. */ | |
4458 | AdvReadWordLram(iop_base, 0x120, wdtr_able); | |
4459 | } else { | |
4460 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
4461 | } | |
4462 | } | |
4463 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
4464 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
4465 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
4466 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
4467 | max_cmd[tid]); | |
4468 | } | |
4469 | ||
989bb5f5 JSR |
4470 | err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); |
4471 | if (err) { | |
4472 | printk(KERN_ERR "Failed to load image \"%s\" err %d\n", | |
4473 | fwname, err); | |
cf747445 | 4474 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4475 | return err; |
4476 | } | |
4477 | if (fw->size < 4) { | |
4478 | printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", | |
4479 | fw->size, fwname); | |
4480 | release_firmware(fw); | |
cf747445 | 4481 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4482 | return -EINVAL; |
4483 | } | |
4484 | chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | | |
4485 | (fw->data[1] << 8) | fw->data[0]; | |
4486 | asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], | |
4487 | fw->size - 4, ADV_3550_MEMSIZE, | |
4488 | chksum); | |
4489 | release_firmware(fw); | |
51219358 MW |
4490 | if (asc_dvc->err_code) |
4491 | return ADV_ERROR; | |
4492 | ||
4493 | /* | |
4494 | * Restore the RISC memory BIOS region. | |
4495 | */ | |
4496 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
4497 | AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
4498 | bios_mem[i]); | |
4499 | } | |
4500 | ||
4501 | /* | |
4502 | * Calculate and write the microcode code checksum to the microcode | |
4503 | * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). | |
4504 | */ | |
4505 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); | |
4506 | AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); | |
4507 | code_sum = 0; | |
4508 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); | |
4509 | for (word = begin_addr; word < end_addr; word += 2) { | |
4510 | code_sum += AdvReadWordAutoIncLram(iop_base); | |
4511 | } | |
4512 | AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); | |
4513 | ||
4514 | /* | |
4515 | * Read and save microcode version and date. | |
4516 | */ | |
4517 | AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, | |
4518 | asc_dvc->cfg->mcode_date); | |
4519 | AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, | |
4520 | asc_dvc->cfg->mcode_version); | |
4521 | ||
4522 | /* | |
4523 | * Set the chip type to indicate the ASC3550. | |
4524 | */ | |
4525 | AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC3550); | |
4526 | ||
4527 | /* | |
4528 | * If the PCI Configuration Command Register "Parity Error Response | |
4529 | * Control" Bit was clear (0), then set the microcode variable | |
4530 | * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode | |
4531 | * to ignore DMA parity errors. | |
4532 | */ | |
4533 | if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { | |
4534 | AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
4535 | word |= CONTROL_FLAG_IGNORE_PERR; | |
4536 | AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
4537 | } | |
4538 | ||
4539 | /* | |
4540 | * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a FIFO | |
4541 | * threshold of 128 bytes. This register is only accessible to the host. | |
4542 | */ | |
4543 | AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, | |
4544 | START_CTL_EMFU | READ_CMD_MRM); | |
4545 | ||
4546 | /* | |
4547 | * Microcode operating variables for WDTR, SDTR, and command tag | |
4548 | * queuing will be set in slave_configure() based on what a | |
4549 | * device reports it is capable of in Inquiry byte 7. | |
4550 | * | |
4551 | * If SCSI Bus Resets have been disabled, then directly set | |
4552 | * SDTR and WDTR from the EEPROM configuration. This will allow | |
4553 | * the BIOS and warm boot to work without a SCSI bus hang on | |
4554 | * the Inquiry caused by host and target mismatched DTR values. | |
4555 | * Without the SCSI Bus Reset, before an Inquiry a device can't | |
4556 | * be assumed to be in Asynchronous, Narrow mode. | |
4557 | */ | |
4558 | if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { | |
4559 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, | |
4560 | asc_dvc->wdtr_able); | |
4561 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, | |
4562 | asc_dvc->sdtr_able); | |
4563 | } | |
4564 | ||
4565 | /* | |
4566 | * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2, | |
4567 | * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID | |
4568 | * bitmask. These values determine the maximum SDTR speed negotiated | |
4569 | * with a device. | |
4570 | * | |
4571 | * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, | |
4572 | * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them | |
4573 | * without determining here whether the device supports SDTR. | |
4574 | * | |
4575 | * 4-bit speed SDTR speed name | |
4576 | * =========== =============== | |
4577 | * 0000b (0x0) SDTR disabled | |
4578 | * 0001b (0x1) 5 Mhz | |
4579 | * 0010b (0x2) 10 Mhz | |
4580 | * 0011b (0x3) 20 Mhz (Ultra) | |
4581 | * 0100b (0x4) 40 Mhz (LVD/Ultra2) | |
4582 | * 0101b (0x5) 80 Mhz (LVD2/Ultra3) | |
4583 | * 0110b (0x6) Undefined | |
4584 | * . | |
4585 | * 1111b (0xF) Undefined | |
4586 | */ | |
4587 | word = 0; | |
4588 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
4589 | if (ADV_TID_TO_TIDMASK(tid) & asc_dvc->ultra_able) { | |
4590 | /* Set Ultra speed for TID 'tid'. */ | |
4591 | word |= (0x3 << (4 * (tid % 4))); | |
4592 | } else { | |
4593 | /* Set Fast speed for TID 'tid'. */ | |
4594 | word |= (0x2 << (4 * (tid % 4))); | |
4595 | } | |
4596 | if (tid == 3) { /* Check if done with sdtr_speed1. */ | |
4597 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, word); | |
4598 | word = 0; | |
4599 | } else if (tid == 7) { /* Check if done with sdtr_speed2. */ | |
4600 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, word); | |
4601 | word = 0; | |
4602 | } else if (tid == 11) { /* Check if done with sdtr_speed3. */ | |
4603 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, word); | |
4604 | word = 0; | |
4605 | } else if (tid == 15) { /* Check if done with sdtr_speed4. */ | |
4606 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, word); | |
4607 | /* End of loop. */ | |
4608 | } | |
4609 | } | |
4610 | ||
4611 | /* | |
4612 | * Set microcode operating variable for the disconnect per TID bitmask. | |
4613 | */ | |
4614 | AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, | |
4615 | asc_dvc->cfg->disc_enable); | |
4616 | ||
4617 | /* | |
4618 | * Set SCSI_CFG0 Microcode Default Value. | |
4619 | * | |
4620 | * The microcode will set the SCSI_CFG0 register using this value | |
4621 | * after it is started below. | |
4622 | */ | |
4623 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, | |
4624 | PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | | |
4625 | asc_dvc->chip_scsi_id); | |
4626 | ||
4627 | /* | |
4628 | * Determine SCSI_CFG1 Microcode Default Value. | |
4629 | * | |
4630 | * The microcode will set the SCSI_CFG1 register using this value | |
4631 | * after it is started below. | |
4632 | */ | |
4633 | ||
4634 | /* Read current SCSI_CFG1 Register value. */ | |
4635 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); | |
4636 | ||
4637 | /* | |
4638 | * If all three connectors are in use, return an error. | |
4639 | */ | |
4640 | if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 || | |
4641 | (scsi_cfg1 & CABLE_ILLEGAL_B) == 0) { | |
4642 | asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION; | |
4643 | return ADV_ERROR; | |
4644 | } | |
4645 | ||
4646 | /* | |
4647 | * If the internal narrow cable is reversed all of the SCSI_CTRL | |
4648 | * register signals will be set. Check for and return an error if | |
4649 | * this condition is found. | |
4650 | */ | |
4651 | if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { | |
4652 | asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; | |
4653 | return ADV_ERROR; | |
4654 | } | |
4655 | ||
4656 | /* | |
4657 | * If this is a differential board and a single-ended device | |
4658 | * is attached to one of the connectors, return an error. | |
4659 | */ | |
4660 | if ((scsi_cfg1 & DIFF_MODE) && (scsi_cfg1 & DIFF_SENSE) == 0) { | |
4661 | asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE; | |
4662 | return ADV_ERROR; | |
4663 | } | |
4664 | ||
4665 | /* | |
4666 | * If automatic termination control is enabled, then set the | |
4667 | * termination value based on a table listed in a_condor.h. | |
4668 | * | |
4669 | * If manual termination was specified with an EEPROM setting | |
4670 | * then 'termination' was set-up in AdvInitFrom3550EEPROM() and | |
4671 | * is ready to be 'ored' into SCSI_CFG1. | |
4672 | */ | |
4673 | if (asc_dvc->cfg->termination == 0) { | |
4674 | /* | |
4675 | * The software always controls termination by setting TERM_CTL_SEL. | |
4676 | * If TERM_CTL_SEL were set to 0, the hardware would set termination. | |
4677 | */ | |
4678 | asc_dvc->cfg->termination |= TERM_CTL_SEL; | |
4679 | ||
4680 | switch (scsi_cfg1 & CABLE_DETECT) { | |
4681 | /* TERM_CTL_H: on, TERM_CTL_L: on */ | |
4682 | case 0x3: | |
4683 | case 0x7: | |
4684 | case 0xB: | |
4685 | case 0xD: | |
4686 | case 0xE: | |
4687 | case 0xF: | |
4688 | asc_dvc->cfg->termination |= (TERM_CTL_H | TERM_CTL_L); | |
4689 | break; | |
4690 | ||
4691 | /* TERM_CTL_H: on, TERM_CTL_L: off */ | |
4692 | case 0x1: | |
4693 | case 0x5: | |
4694 | case 0x9: | |
4695 | case 0xA: | |
4696 | case 0xC: | |
4697 | asc_dvc->cfg->termination |= TERM_CTL_H; | |
4698 | break; | |
4699 | ||
4700 | /* TERM_CTL_H: off, TERM_CTL_L: off */ | |
4701 | case 0x2: | |
4702 | case 0x6: | |
4703 | break; | |
4704 | } | |
4705 | } | |
4706 | ||
4707 | /* | |
4708 | * Clear any set TERM_CTL_H and TERM_CTL_L bits. | |
4709 | */ | |
4710 | scsi_cfg1 &= ~TERM_CTL; | |
4711 | ||
4712 | /* | |
4713 | * Invert the TERM_CTL_H and TERM_CTL_L bits and then | |
4714 | * set 'scsi_cfg1'. The TERM_POL bit does not need to be | |
4715 | * referenced, because the hardware internally inverts | |
4716 | * the Termination High and Low bits if TERM_POL is set. | |
4717 | */ | |
4718 | scsi_cfg1 |= (TERM_CTL_SEL | (~asc_dvc->cfg->termination & TERM_CTL)); | |
4719 | ||
4720 | /* | |
4721 | * Set SCSI_CFG1 Microcode Default Value | |
4722 | * | |
4723 | * Set filter value and possibly modified termination control | |
4724 | * bits in the Microcode SCSI_CFG1 Register Value. | |
4725 | * | |
4726 | * The microcode will set the SCSI_CFG1 register using this value | |
4727 | * after it is started below. | |
4728 | */ | |
4729 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, | |
4730 | FLTR_DISABLE | scsi_cfg1); | |
4731 | ||
4732 | /* | |
4733 | * Set MEM_CFG Microcode Default Value | |
4734 | * | |
4735 | * The microcode will set the MEM_CFG register using this value | |
4736 | * after it is started below. | |
4737 | * | |
4738 | * MEM_CFG may be accessed as a word or byte, but only bits 0-7 | |
4739 | * are defined. | |
4740 | * | |
4741 | * ASC-3550 has 8KB internal memory. | |
4742 | */ | |
4743 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, | |
4744 | BIOS_EN | RAM_SZ_8KB); | |
4745 | ||
4746 | /* | |
4747 | * Set SEL_MASK Microcode Default Value | |
4748 | * | |
4749 | * The microcode will set the SEL_MASK register using this value | |
4750 | * after it is started below. | |
4751 | */ | |
4752 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, | |
4753 | ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); | |
4754 | ||
4755 | AdvBuildCarrierFreelist(asc_dvc); | |
4756 | ||
4757 | /* | |
4758 | * Set-up the Host->RISC Initiator Command Queue (ICQ). | |
4759 | */ | |
4760 | ||
98b96a7d HR |
4761 | asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc); |
4762 | if (!asc_dvc->icq_sp) { | |
51219358 MW |
4763 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
4764 | return ADV_ERROR; | |
4765 | } | |
51219358 MW |
4766 | |
4767 | /* | |
4768 | * Set RISC ICQ physical address start value. | |
4769 | */ | |
4770 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); | |
4771 | ||
4772 | /* | |
4773 | * Set-up the RISC->Host Initiator Response Queue (IRQ). | |
4774 | */ | |
98b96a7d HR |
4775 | asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc); |
4776 | if (!asc_dvc->irq_sp) { | |
51219358 MW |
4777 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
4778 | return ADV_ERROR; | |
4779 | } | |
51219358 MW |
4780 | |
4781 | /* | |
4782 | * Set RISC IRQ physical address start value. | |
4783 | */ | |
4784 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); | |
4785 | asc_dvc->carr_pending_cnt = 0; | |
4786 | ||
4787 | AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, | |
4788 | (ADV_INTR_ENABLE_HOST_INTR | | |
4789 | ADV_INTR_ENABLE_GLOBAL_INTR)); | |
4790 | ||
4791 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); | |
4792 | AdvWriteWordRegister(iop_base, IOPW_PC, word); | |
4793 | ||
4794 | /* finally, finally, gentlemen, start your engine */ | |
4795 | AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); | |
4796 | ||
4797 | /* | |
4798 | * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus | |
4799 | * Resets should be performed. The RISC has to be running | |
4800 | * to issue a SCSI Bus Reset. | |
4801 | */ | |
4802 | if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { | |
4803 | /* | |
4804 | * If the BIOS Signature is present in memory, restore the | |
4805 | * BIOS Handshake Configuration Table and do not perform | |
4806 | * a SCSI Bus Reset. | |
4807 | */ | |
4808 | if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == | |
4809 | 0x55AA) { | |
4810 | /* | |
4811 | * Restore per TID negotiated values. | |
4812 | */ | |
4813 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
4814 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
4815 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, | |
4816 | tagqng_able); | |
4817 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
4818 | AdvWriteByteLram(iop_base, | |
4819 | ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
4820 | max_cmd[tid]); | |
4821 | } | |
4822 | } else { | |
4823 | if (AdvResetSB(asc_dvc) != ADV_TRUE) { | |
4824 | warn_code = ASC_WARN_BUSRESET_ERROR; | |
4825 | } | |
4826 | } | |
4827 | } | |
4828 | ||
4829 | return warn_code; | |
4830 | } | |
4831 | ||
4832 | /* | |
4833 | * Initialize the ASC-38C0800. | |
4834 | * | |
4835 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. | |
4836 | * | |
4837 | * For a non-fatal error return a warning code. If there are no warnings | |
4838 | * then 0 is returned. | |
4839 | * | |
4840 | * Needed after initialization for error recovery. | |
4841 | */ | |
4842 | static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc) | |
4843 | { | |
989bb5f5 JSR |
4844 | const struct firmware *fw; |
4845 | const char fwname[] = "advansys/38C0800.bin"; | |
51219358 MW |
4846 | AdvPortAddr iop_base; |
4847 | ushort warn_code; | |
4848 | int begin_addr; | |
4849 | int end_addr; | |
4850 | ushort code_sum; | |
4851 | int word; | |
4852 | int i; | |
989bb5f5 JSR |
4853 | int err; |
4854 | unsigned long chksum; | |
51219358 MW |
4855 | ushort scsi_cfg1; |
4856 | uchar byte; | |
4857 | uchar tid; | |
4858 | ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ | |
4859 | ushort wdtr_able, sdtr_able, tagqng_able; | |
4860 | uchar max_cmd[ADV_MAX_TID + 1]; | |
4861 | ||
4862 | /* If there is already an error, don't continue. */ | |
4863 | if (asc_dvc->err_code != 0) | |
4864 | return ADV_ERROR; | |
4865 | ||
4866 | /* | |
4867 | * The caller must set 'chip_type' to ADV_CHIP_ASC38C0800. | |
4868 | */ | |
4869 | if (asc_dvc->chip_type != ADV_CHIP_ASC38C0800) { | |
4870 | asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; | |
4871 | return ADV_ERROR; | |
4872 | } | |
4873 | ||
4874 | warn_code = 0; | |
4875 | iop_base = asc_dvc->iop_base; | |
4876 | ||
4877 | /* | |
4878 | * Save the RISC memory BIOS region before writing the microcode. | |
4879 | * The BIOS may already be loaded and using its RISC LRAM region | |
4880 | * so its region must be saved and restored. | |
4881 | * | |
4882 | * Note: This code makes the assumption, which is currently true, | |
4883 | * that a chip reset does not clear RISC LRAM. | |
4884 | */ | |
4885 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
4886 | AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
4887 | bios_mem[i]); | |
4888 | } | |
4889 | ||
4890 | /* | |
4891 | * Save current per TID negotiated values. | |
4892 | */ | |
4893 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
4894 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
4895 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
4896 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
4897 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
4898 | max_cmd[tid]); | |
4899 | } | |
4900 | ||
4901 | /* | |
4902 | * RAM BIST (RAM Built-In Self Test) | |
4903 | * | |
4904 | * Address : I/O base + offset 0x38h register (byte). | |
4905 | * Function: Bit 7-6(RW) : RAM mode | |
4906 | * Normal Mode : 0x00 | |
4907 | * Pre-test Mode : 0x40 | |
4908 | * RAM Test Mode : 0x80 | |
4909 | * Bit 5 : unused | |
4910 | * Bit 4(RO) : Done bit | |
4911 | * Bit 3-0(RO) : Status | |
4912 | * Host Error : 0x08 | |
4913 | * Int_RAM Error : 0x04 | |
4914 | * RISC Error : 0x02 | |
4915 | * SCSI Error : 0x01 | |
4916 | * No Error : 0x00 | |
4917 | * | |
4918 | * Note: RAM BIST code should be put right here, before loading the | |
4919 | * microcode and after saving the RISC memory BIOS region. | |
4920 | */ | |
4921 | ||
4922 | /* | |
4923 | * LRAM Pre-test | |
4924 | * | |
4925 | * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. | |
4926 | * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return | |
4927 | * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset | |
4928 | * to NORMAL_MODE, return an error too. | |
4929 | */ | |
4930 | for (i = 0; i < 2; i++) { | |
4931 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); | |
4932 | mdelay(10); /* Wait for 10ms before reading back. */ | |
4933 | byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); | |
4934 | if ((byte & RAM_TEST_DONE) == 0 | |
4935 | || (byte & 0x0F) != PRE_TEST_VALUE) { | |
4936 | asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; | |
4937 | return ADV_ERROR; | |
4938 | } | |
4939 | ||
4940 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); | |
4941 | mdelay(10); /* Wait for 10ms before reading back. */ | |
4942 | if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) | |
4943 | != NORMAL_VALUE) { | |
4944 | asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; | |
4945 | return ADV_ERROR; | |
4946 | } | |
4947 | } | |
4948 | ||
4949 | /* | |
4950 | * LRAM Test - It takes about 1.5 ms to run through the test. | |
4951 | * | |
4952 | * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. | |
4953 | * If Done bit not set or Status not 0, save register byte, set the | |
4954 | * err_code, and return an error. | |
4955 | */ | |
4956 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); | |
4957 | mdelay(10); /* Wait for 10ms before checking status. */ | |
4958 | ||
4959 | byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); | |
4960 | if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { | |
4961 | /* Get here if Done bit not set or Status not 0. */ | |
4962 | asc_dvc->bist_err_code = byte; /* for BIOS display message */ | |
4963 | asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; | |
4964 | return ADV_ERROR; | |
4965 | } | |
4966 | ||
4967 | /* We need to reset back to normal mode after LRAM test passes. */ | |
4968 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); | |
4969 | ||
989bb5f5 JSR |
4970 | err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); |
4971 | if (err) { | |
4972 | printk(KERN_ERR "Failed to load image \"%s\" err %d\n", | |
4973 | fwname, err); | |
cf747445 | 4974 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4975 | return err; |
4976 | } | |
4977 | if (fw->size < 4) { | |
4978 | printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", | |
4979 | fw->size, fwname); | |
4980 | release_firmware(fw); | |
cf747445 | 4981 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
4982 | return -EINVAL; |
4983 | } | |
4984 | chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | | |
4985 | (fw->data[1] << 8) | fw->data[0]; | |
4986 | asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], | |
4987 | fw->size - 4, ADV_38C0800_MEMSIZE, | |
4988 | chksum); | |
4989 | release_firmware(fw); | |
51219358 MW |
4990 | if (asc_dvc->err_code) |
4991 | return ADV_ERROR; | |
4992 | ||
4993 | /* | |
4994 | * Restore the RISC memory BIOS region. | |
4995 | */ | |
4996 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
4997 | AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
4998 | bios_mem[i]); | |
4999 | } | |
5000 | ||
5001 | /* | |
5002 | * Calculate and write the microcode code checksum to the microcode | |
5003 | * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). | |
5004 | */ | |
5005 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); | |
5006 | AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); | |
5007 | code_sum = 0; | |
5008 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); | |
5009 | for (word = begin_addr; word < end_addr; word += 2) { | |
5010 | code_sum += AdvReadWordAutoIncLram(iop_base); | |
5011 | } | |
5012 | AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); | |
5013 | ||
5014 | /* | |
5015 | * Read microcode version and date. | |
5016 | */ | |
5017 | AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, | |
5018 | asc_dvc->cfg->mcode_date); | |
5019 | AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, | |
5020 | asc_dvc->cfg->mcode_version); | |
5021 | ||
5022 | /* | |
5023 | * Set the chip type to indicate the ASC38C0800. | |
5024 | */ | |
5025 | AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C0800); | |
5026 | ||
5027 | /* | |
5028 | * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. | |
5029 | * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current | |
5030 | * cable detection and then we are able to read C_DET[3:0]. | |
5031 | * | |
5032 | * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 | |
5033 | * Microcode Default Value' section below. | |
5034 | */ | |
5035 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); | |
5036 | AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, | |
5037 | scsi_cfg1 | DIS_TERM_DRV); | |
5038 | ||
5039 | /* | |
5040 | * If the PCI Configuration Command Register "Parity Error Response | |
5041 | * Control" Bit was clear (0), then set the microcode variable | |
5042 | * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode | |
5043 | * to ignore DMA parity errors. | |
5044 | */ | |
5045 | if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { | |
5046 | AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5047 | word |= CONTROL_FLAG_IGNORE_PERR; | |
5048 | AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5049 | } | |
5050 | ||
5051 | /* | |
5052 | * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and START_CTL_TH [3:2] | |
5053 | * bits for the default FIFO threshold. | |
5054 | * | |
5055 | * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes. | |
5056 | * | |
5057 | * For DMA Errata #4 set the BC_THRESH_ENB bit. | |
5058 | */ | |
5059 | AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, | |
5060 | BC_THRESH_ENB | FIFO_THRESH_80B | START_CTL_TH | | |
5061 | READ_CMD_MRM); | |
5062 | ||
5063 | /* | |
5064 | * Microcode operating variables for WDTR, SDTR, and command tag | |
5065 | * queuing will be set in slave_configure() based on what a | |
5066 | * device reports it is capable of in Inquiry byte 7. | |
5067 | * | |
5068 | * If SCSI Bus Resets have been disabled, then directly set | |
5069 | * SDTR and WDTR from the EEPROM configuration. This will allow | |
5070 | * the BIOS and warm boot to work without a SCSI bus hang on | |
5071 | * the Inquiry caused by host and target mismatched DTR values. | |
5072 | * Without the SCSI Bus Reset, before an Inquiry a device can't | |
5073 | * be assumed to be in Asynchronous, Narrow mode. | |
5074 | */ | |
5075 | if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { | |
5076 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, | |
5077 | asc_dvc->wdtr_able); | |
5078 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, | |
5079 | asc_dvc->sdtr_able); | |
5080 | } | |
5081 | ||
5082 | /* | |
5083 | * Set microcode operating variables for DISC and SDTR_SPEED1, | |
5084 | * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM | |
5085 | * configuration values. | |
5086 | * | |
5087 | * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, | |
5088 | * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them | |
5089 | * without determining here whether the device supports SDTR. | |
5090 | */ | |
5091 | AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, | |
5092 | asc_dvc->cfg->disc_enable); | |
5093 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); | |
5094 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); | |
5095 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); | |
5096 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); | |
5097 | ||
5098 | /* | |
5099 | * Set SCSI_CFG0 Microcode Default Value. | |
5100 | * | |
5101 | * The microcode will set the SCSI_CFG0 register using this value | |
5102 | * after it is started below. | |
5103 | */ | |
5104 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, | |
5105 | PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | | |
5106 | asc_dvc->chip_scsi_id); | |
5107 | ||
5108 | /* | |
5109 | * Determine SCSI_CFG1 Microcode Default Value. | |
5110 | * | |
5111 | * The microcode will set the SCSI_CFG1 register using this value | |
5112 | * after it is started below. | |
5113 | */ | |
5114 | ||
5115 | /* Read current SCSI_CFG1 Register value. */ | |
5116 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); | |
5117 | ||
5118 | /* | |
5119 | * If the internal narrow cable is reversed all of the SCSI_CTRL | |
5120 | * register signals will be set. Check for and return an error if | |
5121 | * this condition is found. | |
5122 | */ | |
5123 | if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { | |
5124 | asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; | |
5125 | return ADV_ERROR; | |
5126 | } | |
5127 | ||
5128 | /* | |
5129 | * All kind of combinations of devices attached to one of four | |
5130 | * connectors are acceptable except HVD device attached. For example, | |
5131 | * LVD device can be attached to SE connector while SE device attached | |
5132 | * to LVD connector. If LVD device attached to SE connector, it only | |
5133 | * runs up to Ultra speed. | |
5134 | * | |
5135 | * If an HVD device is attached to one of LVD connectors, return an | |
5136 | * error. However, there is no way to detect HVD device attached to | |
5137 | * SE connectors. | |
5138 | */ | |
5139 | if (scsi_cfg1 & HVD) { | |
5140 | asc_dvc->err_code = ASC_IERR_HVD_DEVICE; | |
5141 | return ADV_ERROR; | |
5142 | } | |
5143 | ||
5144 | /* | |
5145 | * If either SE or LVD automatic termination control is enabled, then | |
5146 | * set the termination value based on a table listed in a_condor.h. | |
5147 | * | |
5148 | * If manual termination was specified with an EEPROM setting then | |
5149 | * 'termination' was set-up in AdvInitFrom38C0800EEPROM() and is ready | |
5150 | * to be 'ored' into SCSI_CFG1. | |
5151 | */ | |
5152 | if ((asc_dvc->cfg->termination & TERM_SE) == 0) { | |
5153 | /* SE automatic termination control is enabled. */ | |
5154 | switch (scsi_cfg1 & C_DET_SE) { | |
5155 | /* TERM_SE_HI: on, TERM_SE_LO: on */ | |
5156 | case 0x1: | |
5157 | case 0x2: | |
5158 | case 0x3: | |
5159 | asc_dvc->cfg->termination |= TERM_SE; | |
5160 | break; | |
5161 | ||
5162 | /* TERM_SE_HI: on, TERM_SE_LO: off */ | |
5163 | case 0x0: | |
5164 | asc_dvc->cfg->termination |= TERM_SE_HI; | |
5165 | break; | |
5166 | } | |
5167 | } | |
5168 | ||
5169 | if ((asc_dvc->cfg->termination & TERM_LVD) == 0) { | |
5170 | /* LVD automatic termination control is enabled. */ | |
5171 | switch (scsi_cfg1 & C_DET_LVD) { | |
5172 | /* TERM_LVD_HI: on, TERM_LVD_LO: on */ | |
5173 | case 0x4: | |
5174 | case 0x8: | |
5175 | case 0xC: | |
5176 | asc_dvc->cfg->termination |= TERM_LVD; | |
5177 | break; | |
5178 | ||
5179 | /* TERM_LVD_HI: off, TERM_LVD_LO: off */ | |
5180 | case 0x0: | |
5181 | break; | |
5182 | } | |
5183 | } | |
5184 | ||
5185 | /* | |
5186 | * Clear any set TERM_SE and TERM_LVD bits. | |
5187 | */ | |
5188 | scsi_cfg1 &= (~TERM_SE & ~TERM_LVD); | |
5189 | ||
5190 | /* | |
5191 | * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'. | |
5192 | */ | |
5193 | scsi_cfg1 |= (~asc_dvc->cfg->termination & 0xF0); | |
5194 | ||
5195 | /* | |
5196 | * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE | |
5197 | * bits and set possibly modified termination control bits in the | |
5198 | * Microcode SCSI_CFG1 Register Value. | |
5199 | */ | |
5200 | scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL & ~HVD_LVD_SE); | |
5201 | ||
5202 | /* | |
5203 | * Set SCSI_CFG1 Microcode Default Value | |
5204 | * | |
5205 | * Set possibly modified termination control and reset DIS_TERM_DRV | |
5206 | * bits in the Microcode SCSI_CFG1 Register Value. | |
5207 | * | |
5208 | * The microcode will set the SCSI_CFG1 register using this value | |
5209 | * after it is started below. | |
5210 | */ | |
5211 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); | |
5212 | ||
5213 | /* | |
5214 | * Set MEM_CFG Microcode Default Value | |
5215 | * | |
5216 | * The microcode will set the MEM_CFG register using this value | |
5217 | * after it is started below. | |
5218 | * | |
5219 | * MEM_CFG may be accessed as a word or byte, but only bits 0-7 | |
5220 | * are defined. | |
5221 | * | |
5222 | * ASC-38C0800 has 16KB internal memory. | |
5223 | */ | |
5224 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, | |
5225 | BIOS_EN | RAM_SZ_16KB); | |
5226 | ||
5227 | /* | |
5228 | * Set SEL_MASK Microcode Default Value | |
5229 | * | |
5230 | * The microcode will set the SEL_MASK register using this value | |
5231 | * after it is started below. | |
5232 | */ | |
5233 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, | |
5234 | ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); | |
5235 | ||
5236 | AdvBuildCarrierFreelist(asc_dvc); | |
5237 | ||
5238 | /* | |
5239 | * Set-up the Host->RISC Initiator Command Queue (ICQ). | |
5240 | */ | |
5241 | ||
98b96a7d HR |
5242 | asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc); |
5243 | if (!asc_dvc->icq_sp) { | |
5244 | ASC_DBG(0, "Failed to get ICQ carrier\n"); | |
51219358 MW |
5245 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
5246 | return ADV_ERROR; | |
5247 | } | |
51219358 MW |
5248 | |
5249 | /* | |
5250 | * Set RISC ICQ physical address start value. | |
5251 | * carr_pa is LE, must be native before write | |
5252 | */ | |
5253 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); | |
5254 | ||
5255 | /* | |
5256 | * Set-up the RISC->Host Initiator Response Queue (IRQ). | |
5257 | */ | |
98b96a7d HR |
5258 | asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc); |
5259 | if (!asc_dvc->irq_sp) { | |
5260 | ASC_DBG(0, "Failed to get IRQ carrier\n"); | |
51219358 MW |
5261 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
5262 | return ADV_ERROR; | |
5263 | } | |
51219358 MW |
5264 | |
5265 | /* | |
5266 | * Set RISC IRQ physical address start value. | |
5267 | * | |
5268 | * carr_pa is LE, must be native before write * | |
5269 | */ | |
5270 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); | |
5271 | asc_dvc->carr_pending_cnt = 0; | |
5272 | ||
5273 | AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, | |
5274 | (ADV_INTR_ENABLE_HOST_INTR | | |
5275 | ADV_INTR_ENABLE_GLOBAL_INTR)); | |
5276 | ||
5277 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); | |
5278 | AdvWriteWordRegister(iop_base, IOPW_PC, word); | |
5279 | ||
5280 | /* finally, finally, gentlemen, start your engine */ | |
5281 | AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); | |
5282 | ||
5283 | /* | |
5284 | * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus | |
5285 | * Resets should be performed. The RISC has to be running | |
5286 | * to issue a SCSI Bus Reset. | |
5287 | */ | |
5288 | if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { | |
5289 | /* | |
5290 | * If the BIOS Signature is present in memory, restore the | |
5291 | * BIOS Handshake Configuration Table and do not perform | |
5292 | * a SCSI Bus Reset. | |
5293 | */ | |
5294 | if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == | |
5295 | 0x55AA) { | |
5296 | /* | |
5297 | * Restore per TID negotiated values. | |
5298 | */ | |
5299 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
5300 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
5301 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, | |
5302 | tagqng_able); | |
5303 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
5304 | AdvWriteByteLram(iop_base, | |
5305 | ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
5306 | max_cmd[tid]); | |
5307 | } | |
5308 | } else { | |
5309 | if (AdvResetSB(asc_dvc) != ADV_TRUE) { | |
5310 | warn_code = ASC_WARN_BUSRESET_ERROR; | |
5311 | } | |
5312 | } | |
5313 | } | |
5314 | ||
5315 | return warn_code; | |
5316 | } | |
5317 | ||
5318 | /* | |
5319 | * Initialize the ASC-38C1600. | |
5320 | * | |
5321 | * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. | |
5322 | * | |
5323 | * For a non-fatal error return a warning code. If there are no warnings | |
5324 | * then 0 is returned. | |
5325 | * | |
5326 | * Needed after initialization for error recovery. | |
5327 | */ | |
5328 | static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc) | |
5329 | { | |
989bb5f5 JSR |
5330 | const struct firmware *fw; |
5331 | const char fwname[] = "advansys/38C1600.bin"; | |
51219358 MW |
5332 | AdvPortAddr iop_base; |
5333 | ushort warn_code; | |
5334 | int begin_addr; | |
5335 | int end_addr; | |
5336 | ushort code_sum; | |
5337 | long word; | |
5338 | int i; | |
989bb5f5 JSR |
5339 | int err; |
5340 | unsigned long chksum; | |
51219358 MW |
5341 | ushort scsi_cfg1; |
5342 | uchar byte; | |
5343 | uchar tid; | |
5344 | ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ | |
5345 | ushort wdtr_able, sdtr_able, ppr_able, tagqng_able; | |
5346 | uchar max_cmd[ASC_MAX_TID + 1]; | |
5347 | ||
5348 | /* If there is already an error, don't continue. */ | |
5349 | if (asc_dvc->err_code != 0) { | |
5350 | return ADV_ERROR; | |
5351 | } | |
5352 | ||
5353 | /* | |
5354 | * The caller must set 'chip_type' to ADV_CHIP_ASC38C1600. | |
5355 | */ | |
5356 | if (asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { | |
5357 | asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; | |
5358 | return ADV_ERROR; | |
5359 | } | |
5360 | ||
5361 | warn_code = 0; | |
5362 | iop_base = asc_dvc->iop_base; | |
5363 | ||
5364 | /* | |
5365 | * Save the RISC memory BIOS region before writing the microcode. | |
5366 | * The BIOS may already be loaded and using its RISC LRAM region | |
5367 | * so its region must be saved and restored. | |
5368 | * | |
5369 | * Note: This code makes the assumption, which is currently true, | |
5370 | * that a chip reset does not clear RISC LRAM. | |
5371 | */ | |
5372 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
5373 | AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
5374 | bios_mem[i]); | |
5375 | } | |
5376 | ||
5377 | /* | |
5378 | * Save current per TID negotiated values. | |
5379 | */ | |
5380 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
5381 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
5382 | AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); | |
5383 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
5384 | for (tid = 0; tid <= ASC_MAX_TID; tid++) { | |
5385 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
5386 | max_cmd[tid]); | |
5387 | } | |
5388 | ||
5389 | /* | |
5390 | * RAM BIST (Built-In Self Test) | |
5391 | * | |
5392 | * Address : I/O base + offset 0x38h register (byte). | |
5393 | * Function: Bit 7-6(RW) : RAM mode | |
5394 | * Normal Mode : 0x00 | |
5395 | * Pre-test Mode : 0x40 | |
5396 | * RAM Test Mode : 0x80 | |
5397 | * Bit 5 : unused | |
5398 | * Bit 4(RO) : Done bit | |
5399 | * Bit 3-0(RO) : Status | |
5400 | * Host Error : 0x08 | |
5401 | * Int_RAM Error : 0x04 | |
5402 | * RISC Error : 0x02 | |
5403 | * SCSI Error : 0x01 | |
5404 | * No Error : 0x00 | |
5405 | * | |
5406 | * Note: RAM BIST code should be put right here, before loading the | |
5407 | * microcode and after saving the RISC memory BIOS region. | |
5408 | */ | |
5409 | ||
5410 | /* | |
5411 | * LRAM Pre-test | |
5412 | * | |
5413 | * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. | |
5414 | * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return | |
5415 | * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset | |
5416 | * to NORMAL_MODE, return an error too. | |
5417 | */ | |
5418 | for (i = 0; i < 2; i++) { | |
5419 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); | |
5420 | mdelay(10); /* Wait for 10ms before reading back. */ | |
5421 | byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); | |
5422 | if ((byte & RAM_TEST_DONE) == 0 | |
5423 | || (byte & 0x0F) != PRE_TEST_VALUE) { | |
5424 | asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; | |
5425 | return ADV_ERROR; | |
5426 | } | |
5427 | ||
5428 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); | |
5429 | mdelay(10); /* Wait for 10ms before reading back. */ | |
5430 | if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) | |
5431 | != NORMAL_VALUE) { | |
5432 | asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; | |
5433 | return ADV_ERROR; | |
5434 | } | |
5435 | } | |
5436 | ||
5437 | /* | |
5438 | * LRAM Test - It takes about 1.5 ms to run through the test. | |
5439 | * | |
5440 | * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. | |
5441 | * If Done bit not set or Status not 0, save register byte, set the | |
5442 | * err_code, and return an error. | |
5443 | */ | |
5444 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); | |
5445 | mdelay(10); /* Wait for 10ms before checking status. */ | |
5446 | ||
5447 | byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); | |
5448 | if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { | |
5449 | /* Get here if Done bit not set or Status not 0. */ | |
5450 | asc_dvc->bist_err_code = byte; /* for BIOS display message */ | |
5451 | asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; | |
5452 | return ADV_ERROR; | |
5453 | } | |
5454 | ||
5455 | /* We need to reset back to normal mode after LRAM test passes. */ | |
5456 | AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); | |
5457 | ||
989bb5f5 JSR |
5458 | err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); |
5459 | if (err) { | |
5460 | printk(KERN_ERR "Failed to load image \"%s\" err %d\n", | |
5461 | fwname, err); | |
cf747445 | 5462 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
5463 | return err; |
5464 | } | |
5465 | if (fw->size < 4) { | |
5466 | printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", | |
5467 | fw->size, fwname); | |
5468 | release_firmware(fw); | |
cf747445 | 5469 | asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; |
989bb5f5 JSR |
5470 | return -EINVAL; |
5471 | } | |
5472 | chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | | |
5473 | (fw->data[1] << 8) | fw->data[0]; | |
5474 | asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], | |
5475 | fw->size - 4, ADV_38C1600_MEMSIZE, | |
5476 | chksum); | |
5477 | release_firmware(fw); | |
51219358 MW |
5478 | if (asc_dvc->err_code) |
5479 | return ADV_ERROR; | |
5480 | ||
5481 | /* | |
5482 | * Restore the RISC memory BIOS region. | |
5483 | */ | |
5484 | for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { | |
5485 | AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), | |
5486 | bios_mem[i]); | |
5487 | } | |
5488 | ||
5489 | /* | |
5490 | * Calculate and write the microcode code checksum to the microcode | |
5491 | * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). | |
5492 | */ | |
5493 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); | |
5494 | AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); | |
5495 | code_sum = 0; | |
5496 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); | |
5497 | for (word = begin_addr; word < end_addr; word += 2) { | |
5498 | code_sum += AdvReadWordAutoIncLram(iop_base); | |
5499 | } | |
5500 | AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); | |
5501 | ||
5502 | /* | |
5503 | * Read microcode version and date. | |
5504 | */ | |
5505 | AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, | |
5506 | asc_dvc->cfg->mcode_date); | |
5507 | AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, | |
5508 | asc_dvc->cfg->mcode_version); | |
5509 | ||
5510 | /* | |
5511 | * Set the chip type to indicate the ASC38C1600. | |
5512 | */ | |
5513 | AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C1600); | |
5514 | ||
5515 | /* | |
5516 | * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. | |
5517 | * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current | |
5518 | * cable detection and then we are able to read C_DET[3:0]. | |
5519 | * | |
5520 | * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 | |
5521 | * Microcode Default Value' section below. | |
5522 | */ | |
5523 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); | |
5524 | AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, | |
5525 | scsi_cfg1 | DIS_TERM_DRV); | |
5526 | ||
5527 | /* | |
5528 | * If the PCI Configuration Command Register "Parity Error Response | |
5529 | * Control" Bit was clear (0), then set the microcode variable | |
5530 | * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode | |
5531 | * to ignore DMA parity errors. | |
5532 | */ | |
5533 | if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { | |
5534 | AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5535 | word |= CONTROL_FLAG_IGNORE_PERR; | |
5536 | AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5537 | } | |
5538 | ||
5539 | /* | |
5540 | * If the BIOS control flag AIPP (Asynchronous Information | |
5541 | * Phase Protection) disable bit is not set, then set the firmware | |
5542 | * 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to enable | |
5543 | * AIPP checking and encoding. | |
5544 | */ | |
5545 | if ((asc_dvc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0) { | |
5546 | AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5547 | word |= CONTROL_FLAG_ENABLE_AIPP; | |
5548 | AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); | |
5549 | } | |
5550 | ||
5551 | /* | |
5552 | * For ASC-38C1600 use DMA_CFG0 default values: FIFO_THRESH_80B [6:4], | |
5553 | * and START_CTL_TH [3:2]. | |
5554 | */ | |
5555 | AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, | |
5556 | FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM); | |
5557 | ||
5558 | /* | |
5559 | * Microcode operating variables for WDTR, SDTR, and command tag | |
5560 | * queuing will be set in slave_configure() based on what a | |
5561 | * device reports it is capable of in Inquiry byte 7. | |
5562 | * | |
5563 | * If SCSI Bus Resets have been disabled, then directly set | |
5564 | * SDTR and WDTR from the EEPROM configuration. This will allow | |
5565 | * the BIOS and warm boot to work without a SCSI bus hang on | |
5566 | * the Inquiry caused by host and target mismatched DTR values. | |
5567 | * Without the SCSI Bus Reset, before an Inquiry a device can't | |
5568 | * be assumed to be in Asynchronous, Narrow mode. | |
5569 | */ | |
5570 | if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { | |
5571 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, | |
5572 | asc_dvc->wdtr_able); | |
5573 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, | |
5574 | asc_dvc->sdtr_able); | |
5575 | } | |
5576 | ||
5577 | /* | |
5578 | * Set microcode operating variables for DISC and SDTR_SPEED1, | |
5579 | * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM | |
5580 | * configuration values. | |
5581 | * | |
5582 | * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, | |
5583 | * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them | |
5584 | * without determining here whether the device supports SDTR. | |
5585 | */ | |
5586 | AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, | |
5587 | asc_dvc->cfg->disc_enable); | |
5588 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); | |
5589 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); | |
5590 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); | |
5591 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); | |
5592 | ||
5593 | /* | |
5594 | * Set SCSI_CFG0 Microcode Default Value. | |
5595 | * | |
5596 | * The microcode will set the SCSI_CFG0 register using this value | |
5597 | * after it is started below. | |
5598 | */ | |
5599 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, | |
5600 | PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | | |
5601 | asc_dvc->chip_scsi_id); | |
5602 | ||
5603 | /* | |
5604 | * Calculate SCSI_CFG1 Microcode Default Value. | |
5605 | * | |
5606 | * The microcode will set the SCSI_CFG1 register using this value | |
5607 | * after it is started below. | |
5608 | * | |
5609 | * Each ASC-38C1600 function has only two cable detect bits. | |
5610 | * The bus mode override bits are in IOPB_SOFT_OVER_WR. | |
5611 | */ | |
5612 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); | |
5613 | ||
5614 | /* | |
5615 | * If the cable is reversed all of the SCSI_CTRL register signals | |
5616 | * will be set. Check for and return an error if this condition is | |
5617 | * found. | |
5618 | */ | |
5619 | if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { | |
5620 | asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; | |
5621 | return ADV_ERROR; | |
5622 | } | |
5623 | ||
5624 | /* | |
5625 | * Each ASC-38C1600 function has two connectors. Only an HVD device | |
5626 | * can not be connected to either connector. An LVD device or SE device | |
5627 | * may be connected to either connecor. If an SE device is connected, | |
5628 | * then at most Ultra speed (20 Mhz) can be used on both connectors. | |
5629 | * | |
5630 | * If an HVD device is attached, return an error. | |
5631 | */ | |
5632 | if (scsi_cfg1 & HVD) { | |
5633 | asc_dvc->err_code |= ASC_IERR_HVD_DEVICE; | |
5634 | return ADV_ERROR; | |
5635 | } | |
5636 | ||
5637 | /* | |
5638 | * Each function in the ASC-38C1600 uses only the SE cable detect and | |
5639 | * termination because there are two connectors for each function. Each | |
5640 | * function may use either LVD or SE mode. Corresponding the SE automatic | |
5641 | * termination control EEPROM bits are used for each function. Each | |
5642 | * function has its own EEPROM. If SE automatic control is enabled for | |
5643 | * the function, then set the termination value based on a table listed | |
5644 | * in a_condor.h. | |
5645 | * | |
5646 | * If manual termination is specified in the EEPROM for the function, | |
5647 | * then 'termination' was set-up in AscInitFrom38C1600EEPROM() and is | |
5648 | * ready to be 'ored' into SCSI_CFG1. | |
5649 | */ | |
5650 | if ((asc_dvc->cfg->termination & TERM_SE) == 0) { | |
5651 | struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); | |
5652 | /* SE automatic termination control is enabled. */ | |
5653 | switch (scsi_cfg1 & C_DET_SE) { | |
5654 | /* TERM_SE_HI: on, TERM_SE_LO: on */ | |
5655 | case 0x1: | |
5656 | case 0x2: | |
5657 | case 0x3: | |
5658 | asc_dvc->cfg->termination |= TERM_SE; | |
5659 | break; | |
5660 | ||
5661 | case 0x0: | |
5662 | if (PCI_FUNC(pdev->devfn) == 0) { | |
5663 | /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */ | |
5664 | } else { | |
5665 | /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */ | |
5666 | asc_dvc->cfg->termination |= TERM_SE_HI; | |
5667 | } | |
5668 | break; | |
5669 | } | |
5670 | } | |
5671 | ||
5672 | /* | |
5673 | * Clear any set TERM_SE bits. | |
5674 | */ | |
5675 | scsi_cfg1 &= ~TERM_SE; | |
5676 | ||
5677 | /* | |
5678 | * Invert the TERM_SE bits and then set 'scsi_cfg1'. | |
5679 | */ | |
5680 | scsi_cfg1 |= (~asc_dvc->cfg->termination & TERM_SE); | |
5681 | ||
5682 | /* | |
5683 | * Clear Big Endian and Terminator Polarity bits and set possibly | |
5684 | * modified termination control bits in the Microcode SCSI_CFG1 | |
5685 | * Register Value. | |
5686 | * | |
5687 | * Big Endian bit is not used even on big endian machines. | |
5688 | */ | |
5689 | scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL); | |
5690 | ||
5691 | /* | |
5692 | * Set SCSI_CFG1 Microcode Default Value | |
5693 | * | |
5694 | * Set possibly modified termination control bits in the Microcode | |
5695 | * SCSI_CFG1 Register Value. | |
5696 | * | |
5697 | * The microcode will set the SCSI_CFG1 register using this value | |
5698 | * after it is started below. | |
5699 | */ | |
5700 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); | |
5701 | ||
5702 | /* | |
5703 | * Set MEM_CFG Microcode Default Value | |
5704 | * | |
5705 | * The microcode will set the MEM_CFG register using this value | |
5706 | * after it is started below. | |
5707 | * | |
5708 | * MEM_CFG may be accessed as a word or byte, but only bits 0-7 | |
5709 | * are defined. | |
5710 | * | |
5711 | * ASC-38C1600 has 32KB internal memory. | |
5712 | * | |
5713 | * XXX - Since ASC38C1600 Rev.3 has a Local RAM failure issue, we come | |
5714 | * out a special 16K Adv Library and Microcode version. After the issue | |
5715 | * resolved, we should turn back to the 32K support. Both a_condor.h and | |
5716 | * mcode.sas files also need to be updated. | |
5717 | * | |
5718 | * AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, | |
5719 | * BIOS_EN | RAM_SZ_32KB); | |
5720 | */ | |
5721 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, | |
5722 | BIOS_EN | RAM_SZ_16KB); | |
5723 | ||
5724 | /* | |
5725 | * Set SEL_MASK Microcode Default Value | |
5726 | * | |
5727 | * The microcode will set the SEL_MASK register using this value | |
5728 | * after it is started below. | |
5729 | */ | |
5730 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, | |
5731 | ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); | |
5732 | ||
5733 | AdvBuildCarrierFreelist(asc_dvc); | |
5734 | ||
5735 | /* | |
5736 | * Set-up the Host->RISC Initiator Command Queue (ICQ). | |
5737 | */ | |
98b96a7d HR |
5738 | asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc); |
5739 | if (!asc_dvc->icq_sp) { | |
51219358 MW |
5740 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
5741 | return ADV_ERROR; | |
5742 | } | |
51219358 MW |
5743 | |
5744 | /* | |
5745 | * Set RISC ICQ physical address start value. Initialize the | |
5746 | * COMMA register to the same value otherwise the RISC will | |
5747 | * prematurely detect a command is available. | |
5748 | */ | |
5749 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); | |
5750 | AdvWriteDWordRegister(iop_base, IOPDW_COMMA, | |
5751 | le32_to_cpu(asc_dvc->icq_sp->carr_pa)); | |
5752 | ||
5753 | /* | |
5754 | * Set-up the RISC->Host Initiator Response Queue (IRQ). | |
5755 | */ | |
98b96a7d HR |
5756 | asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc); |
5757 | if (!asc_dvc->irq_sp) { | |
51219358 MW |
5758 | asc_dvc->err_code |= ASC_IERR_NO_CARRIER; |
5759 | return ADV_ERROR; | |
5760 | } | |
51219358 MW |
5761 | |
5762 | /* | |
5763 | * Set RISC IRQ physical address start value. | |
5764 | */ | |
5765 | AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); | |
5766 | asc_dvc->carr_pending_cnt = 0; | |
5767 | ||
5768 | AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, | |
5769 | (ADV_INTR_ENABLE_HOST_INTR | | |
5770 | ADV_INTR_ENABLE_GLOBAL_INTR)); | |
5771 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); | |
5772 | AdvWriteWordRegister(iop_base, IOPW_PC, word); | |
5773 | ||
5774 | /* finally, finally, gentlemen, start your engine */ | |
5775 | AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); | |
5776 | ||
5777 | /* | |
5778 | * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus | |
5779 | * Resets should be performed. The RISC has to be running | |
5780 | * to issue a SCSI Bus Reset. | |
5781 | */ | |
5782 | if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { | |
5783 | /* | |
5784 | * If the BIOS Signature is present in memory, restore the | |
5785 | * per TID microcode operating variables. | |
5786 | */ | |
5787 | if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == | |
5788 | 0x55AA) { | |
5789 | /* | |
5790 | * Restore per TID negotiated values. | |
5791 | */ | |
5792 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
5793 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
5794 | AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); | |
5795 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, | |
5796 | tagqng_able); | |
5797 | for (tid = 0; tid <= ASC_MAX_TID; tid++) { | |
5798 | AdvWriteByteLram(iop_base, | |
5799 | ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
5800 | max_cmd[tid]); | |
5801 | } | |
5802 | } else { | |
5803 | if (AdvResetSB(asc_dvc) != ADV_TRUE) { | |
5804 | warn_code = ASC_WARN_BUSRESET_ERROR; | |
5805 | } | |
5806 | } | |
5807 | } | |
5808 | ||
5809 | return warn_code; | |
5810 | } | |
5811 | ||
5812 | /* | |
5813 | * Reset chip and SCSI Bus. | |
5814 | * | |
5815 | * Return Value: | |
5816 | * ADV_TRUE(1) - Chip re-initialization and SCSI Bus Reset successful. | |
5817 | * ADV_FALSE(0) - Chip re-initialization and SCSI Bus Reset failure. | |
5818 | */ | |
5819 | static int AdvResetChipAndSB(ADV_DVC_VAR *asc_dvc) | |
5820 | { | |
5821 | int status; | |
5822 | ushort wdtr_able, sdtr_able, tagqng_able; | |
5823 | ushort ppr_able = 0; | |
5824 | uchar tid, max_cmd[ADV_MAX_TID + 1]; | |
5825 | AdvPortAddr iop_base; | |
5826 | ushort bios_sig; | |
5827 | ||
5828 | iop_base = asc_dvc->iop_base; | |
5829 | ||
5830 | /* | |
5831 | * Save current per TID negotiated values. | |
5832 | */ | |
5833 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
5834 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
5835 | if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { | |
5836 | AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); | |
5837 | } | |
5838 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
5839 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
5840 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
5841 | max_cmd[tid]); | |
5842 | } | |
5843 | ||
5844 | /* | |
5845 | * Force the AdvInitAsc3550/38C0800Driver() function to | |
5846 | * perform a SCSI Bus Reset by clearing the BIOS signature word. | |
5847 | * The initialization functions assumes a SCSI Bus Reset is not | |
5848 | * needed if the BIOS signature word is present. | |
5849 | */ | |
5850 | AdvReadWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); | |
5851 | AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, 0); | |
5852 | ||
5853 | /* | |
5854 | * Stop chip and reset it. | |
5855 | */ | |
5856 | AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_STOP); | |
5857 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET); | |
5858 | mdelay(100); | |
5859 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, | |
5860 | ADV_CTRL_REG_CMD_WR_IO_REG); | |
5861 | ||
5862 | /* | |
5863 | * Reset Adv Library error code, if any, and try | |
5864 | * re-initializing the chip. | |
5865 | */ | |
5866 | asc_dvc->err_code = 0; | |
5867 | if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { | |
5868 | status = AdvInitAsc38C1600Driver(asc_dvc); | |
5869 | } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { | |
5870 | status = AdvInitAsc38C0800Driver(asc_dvc); | |
5871 | } else { | |
5872 | status = AdvInitAsc3550Driver(asc_dvc); | |
5873 | } | |
5874 | ||
5875 | /* Translate initialization return value to status value. */ | |
5876 | if (status == 0) { | |
5877 | status = ADV_TRUE; | |
5878 | } else { | |
5879 | status = ADV_FALSE; | |
5880 | } | |
5881 | ||
5882 | /* | |
5883 | * Restore the BIOS signature word. | |
5884 | */ | |
5885 | AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); | |
5886 | ||
5887 | /* | |
5888 | * Restore per TID negotiated values. | |
5889 | */ | |
5890 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); | |
5891 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); | |
5892 | if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { | |
5893 | AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); | |
5894 | } | |
5895 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); | |
5896 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
5897 | AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, | |
5898 | max_cmd[tid]); | |
5899 | } | |
5900 | ||
5901 | return status; | |
5902 | } | |
5903 | ||
5904 | /* | |
5905 | * adv_async_callback() - Adv Library asynchronous event callback function. | |
5906 | */ | |
5907 | static void adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code) | |
5908 | { | |
5909 | switch (code) { | |
5910 | case ADV_ASYNC_SCSI_BUS_RESET_DET: | |
5911 | /* | |
5912 | * The firmware detected a SCSI Bus reset. | |
5913 | */ | |
b352f923 | 5914 | ASC_DBG(0, "ADV_ASYNC_SCSI_BUS_RESET_DET\n"); |
51219358 MW |
5915 | break; |
5916 | ||
5917 | case ADV_ASYNC_RDMA_FAILURE: | |
5918 | /* | |
5919 | * Handle RDMA failure by resetting the SCSI Bus and | |
5920 | * possibly the chip if it is unresponsive. Log the error | |
5921 | * with a unique code. | |
5922 | */ | |
b352f923 | 5923 | ASC_DBG(0, "ADV_ASYNC_RDMA_FAILURE\n"); |
51219358 MW |
5924 | AdvResetChipAndSB(adv_dvc_varp); |
5925 | break; | |
5926 | ||
5927 | case ADV_HOST_SCSI_BUS_RESET: | |
5928 | /* | |
5929 | * Host generated SCSI bus reset occurred. | |
5930 | */ | |
b352f923 | 5931 | ASC_DBG(0, "ADV_HOST_SCSI_BUS_RESET\n"); |
51219358 MW |
5932 | break; |
5933 | ||
5934 | default: | |
b352f923 | 5935 | ASC_DBG(0, "unknown code 0x%x\n", code); |
51219358 MW |
5936 | break; |
5937 | } | |
5938 | } | |
5939 | ||
5940 | /* | |
5941 | * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR(). | |
5942 | * | |
5943 | * Callback function for the Wide SCSI Adv Library. | |
5944 | */ | |
5945 | static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) | |
5946 | { | |
9c17c62a | 5947 | struct asc_board *boardp = adv_dvc_varp->drv_ptr; |
51219358 MW |
5948 | adv_req_t *reqp; |
5949 | adv_sgblk_t *sgblkp; | |
5950 | struct scsi_cmnd *scp; | |
95cfab6c | 5951 | u32 resid_cnt; |
811ddc05 | 5952 | dma_addr_t sense_addr; |
51219358 | 5953 | |
9c17c62a HR |
5954 | ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n", |
5955 | adv_dvc_varp, scsiqp); | |
51219358 MW |
5956 | ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); |
5957 | ||
5958 | /* | |
5959 | * Get the adv_req_t structure for the command that has been | |
5960 | * completed. The adv_req_t structure actually contains the | |
5961 | * completed ADV_SCSI_REQ_Q structure. | |
5962 | */ | |
9c17c62a | 5963 | scp = scsi_host_find_tag(boardp->shost, scsiqp->srb_tag); |
51219358 | 5964 | |
b352f923 | 5965 | ASC_DBG(1, "scp 0x%p\n", scp); |
51219358 MW |
5966 | if (scp == NULL) { |
5967 | ASC_PRINT | |
5968 | ("adv_isr_callback: scp is NULL; adv_req_t dropped.\n"); | |
5969 | return; | |
5970 | } | |
5971 | ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); | |
5972 | ||
9c17c62a HR |
5973 | reqp = (adv_req_t *)scp->host_scribble; |
5974 | ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp); | |
5975 | if (reqp == NULL) { | |
5976 | ASC_PRINT("adv_isr_callback: reqp is NULL\n"); | |
5977 | return; | |
5978 | } | |
5979 | /* | |
5980 | * Remove backreferences to avoid duplicate | |
5981 | * command completions. | |
5982 | */ | |
5983 | scp->host_scribble = NULL; | |
5984 | reqp->cmndp = NULL; | |
51219358 | 5985 | |
9c17c62a HR |
5986 | ASC_STATS(boardp->shost, callback); |
5987 | ASC_DBG(1, "shost 0x%p\n", boardp->shost); | |
51219358 | 5988 | |
811ddc05 HR |
5989 | sense_addr = le32_to_cpu(scsiqp->sense_addr); |
5990 | dma_unmap_single(boardp->dev, sense_addr, | |
5991 | SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); | |
5992 | ||
51219358 MW |
5993 | /* |
5994 | * 'done_status' contains the command's ending status. | |
5995 | */ | |
5996 | switch (scsiqp->done_status) { | |
5997 | case QD_NO_ERROR: | |
b352f923 | 5998 | ASC_DBG(2, "QD_NO_ERROR\n"); |
51219358 MW |
5999 | scp->result = 0; |
6000 | ||
6001 | /* | |
6002 | * Check for an underrun condition. | |
6003 | * | |
6004 | * If there was no error and an underrun condition, then | |
6005 | * then return the number of underrun bytes. | |
6006 | */ | |
6007 | resid_cnt = le32_to_cpu(scsiqp->data_cnt); | |
52c334e9 MW |
6008 | if (scsi_bufflen(scp) != 0 && resid_cnt != 0 && |
6009 | resid_cnt <= scsi_bufflen(scp)) { | |
b352f923 | 6010 | ASC_DBG(1, "underrun condition %lu bytes\n", |
51219358 | 6011 | (ulong)resid_cnt); |
52c334e9 | 6012 | scsi_set_resid(scp, resid_cnt); |
51219358 MW |
6013 | } |
6014 | break; | |
6015 | ||
6016 | case QD_WITH_ERROR: | |
b352f923 | 6017 | ASC_DBG(2, "QD_WITH_ERROR\n"); |
51219358 MW |
6018 | switch (scsiqp->host_status) { |
6019 | case QHSTA_NO_ERROR: | |
6020 | if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) { | |
b352f923 | 6021 | ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); |
51219358 | 6022 | ASC_DBG_PRT_SENSE(2, scp->sense_buffer, |
b80ca4f7 | 6023 | SCSI_SENSE_BUFFERSIZE); |
51219358 MW |
6024 | /* |
6025 | * Note: The 'status_byte()' macro used by | |
6026 | * target drivers defined in scsi.h shifts the | |
6027 | * status byte returned by host drivers right | |
6028 | * by 1 bit. This is why target drivers also | |
6029 | * use right shifted status byte definitions. | |
6030 | * For instance target drivers use | |
6031 | * CHECK_CONDITION, defined to 0x1, instead of | |
6032 | * the SCSI defined check condition value of | |
6033 | * 0x2. Host drivers are supposed to return | |
6034 | * the status byte as it is defined by SCSI. | |
6035 | */ | |
6036 | scp->result = DRIVER_BYTE(DRIVER_SENSE) | | |
6037 | STATUS_BYTE(scsiqp->scsi_status); | |
6038 | } else { | |
6039 | scp->result = STATUS_BYTE(scsiqp->scsi_status); | |
6040 | } | |
6041 | break; | |
6042 | ||
6043 | default: | |
6044 | /* Some other QHSTA error occurred. */ | |
b352f923 | 6045 | ASC_DBG(1, "host_status 0x%x\n", scsiqp->host_status); |
51219358 MW |
6046 | scp->result = HOST_BYTE(DID_BAD_TARGET); |
6047 | break; | |
6048 | } | |
6049 | break; | |
6050 | ||
6051 | case QD_ABORTED_BY_HOST: | |
b352f923 | 6052 | ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); |
51219358 MW |
6053 | scp->result = |
6054 | HOST_BYTE(DID_ABORT) | STATUS_BYTE(scsiqp->scsi_status); | |
6055 | break; | |
6056 | ||
6057 | default: | |
b352f923 | 6058 | ASC_DBG(1, "done_status 0x%x\n", scsiqp->done_status); |
51219358 MW |
6059 | scp->result = |
6060 | HOST_BYTE(DID_ERROR) | STATUS_BYTE(scsiqp->scsi_status); | |
6061 | break; | |
6062 | } | |
6063 | ||
6064 | /* | |
6065 | * If the 'init_tidmask' bit isn't already set for the target and the | |
6066 | * current request finished normally, then set the bit for the target | |
6067 | * to indicate that a device is present. | |
6068 | */ | |
6069 | if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && | |
6070 | scsiqp->done_status == QD_NO_ERROR && | |
6071 | scsiqp->host_status == QHSTA_NO_ERROR) { | |
6072 | boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); | |
6073 | } | |
6074 | ||
6075 | asc_scsi_done(scp); | |
6076 | ||
6077 | /* | |
6078 | * Free all 'adv_sgblk_t' structures allocated for the request. | |
6079 | */ | |
6080 | while ((sgblkp = reqp->sgblkp) != NULL) { | |
6081 | /* Remove 'sgblkp' from the request list. */ | |
6082 | reqp->sgblkp = sgblkp->next_sgblkp; | |
6083 | ||
0ce53822 HR |
6084 | dma_pool_free(boardp->adv_sgblk_pool, sgblkp, |
6085 | sgblkp->sg_addr); | |
51219358 MW |
6086 | } |
6087 | ||
b352f923 | 6088 | ASC_DBG(1, "done\n"); |
51219358 MW |
6089 | } |
6090 | ||
6091 | /* | |
6092 | * Adv Library Interrupt Service Routine | |
6093 | * | |
6094 | * This function is called by a driver's interrupt service routine. | |
6095 | * The function disables and re-enables interrupts. | |
6096 | * | |
6097 | * When a microcode idle command is completed, the ADV_DVC_VAR | |
6098 | * 'idle_cmd_done' field is set to ADV_TRUE. | |
6099 | * | |
6100 | * Note: AdvISR() can be called when interrupts are disabled or even | |
6101 | * when there is no hardware interrupt condition present. It will | |
6102 | * always check for completed idle commands and microcode requests. | |
6103 | * This is an important feature that shouldn't be changed because it | |
6104 | * allows commands to be completed from polling mode loops. | |
6105 | * | |
6106 | * Return: | |
6107 | * ADV_TRUE(1) - interrupt was pending | |
6108 | * ADV_FALSE(0) - no interrupt was pending | |
6109 | */ | |
6110 | static int AdvISR(ADV_DVC_VAR *asc_dvc) | |
6111 | { | |
6112 | AdvPortAddr iop_base; | |
6113 | uchar int_stat; | |
6114 | ushort target_bit; | |
6115 | ADV_CARR_T *free_carrp; | |
95cfab6c | 6116 | __le32 irq_next_vpa; |
51219358 | 6117 | ADV_SCSI_REQ_Q *scsiq; |
4b47e464 | 6118 | adv_req_t *reqp; |
51219358 MW |
6119 | |
6120 | iop_base = asc_dvc->iop_base; | |
6121 | ||
6122 | /* Reading the register clears the interrupt. */ | |
6123 | int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG); | |
6124 | ||
6125 | if ((int_stat & (ADV_INTR_STATUS_INTRA | ADV_INTR_STATUS_INTRB | | |
6126 | ADV_INTR_STATUS_INTRC)) == 0) { | |
6127 | return ADV_FALSE; | |
6128 | } | |
6129 | ||
6130 | /* | |
6131 | * Notify the driver of an asynchronous microcode condition by | |
6132 | * calling the adv_async_callback function. The function | |
6133 | * is passed the microcode ASC_MC_INTRB_CODE byte value. | |
6134 | */ | |
6135 | if (int_stat & ADV_INTR_STATUS_INTRB) { | |
6136 | uchar intrb_code; | |
6137 | ||
6138 | AdvReadByteLram(iop_base, ASC_MC_INTRB_CODE, intrb_code); | |
6139 | ||
6140 | if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || | |
6141 | asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { | |
6142 | if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE && | |
6143 | asc_dvc->carr_pending_cnt != 0) { | |
6144 | AdvWriteByteRegister(iop_base, IOPB_TICKLE, | |
6145 | ADV_TICKLE_A); | |
6146 | if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { | |
6147 | AdvWriteByteRegister(iop_base, | |
6148 | IOPB_TICKLE, | |
6149 | ADV_TICKLE_NOP); | |
6150 | } | |
6151 | } | |
6152 | } | |
6153 | ||
6154 | adv_async_callback(asc_dvc, intrb_code); | |
6155 | } | |
6156 | ||
6157 | /* | |
6158 | * Check if the IRQ stopper carrier contains a completed request. | |
6159 | */ | |
6160 | while (((irq_next_vpa = | |
084e6c36 | 6161 | le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ADV_RQ_DONE) != 0) { |
51219358 MW |
6162 | /* |
6163 | * Get a pointer to the newly completed ADV_SCSI_REQ_Q structure. | |
6164 | * The RISC will have set 'areq_vpa' to a virtual address. | |
6165 | * | |
9fef6ba4 | 6166 | * The firmware will have copied the ADV_SCSI_REQ_Q.scsiq_ptr |
51219358 | 6167 | * field to the carrier ADV_CARR_T.areq_vpa field. The conversion |
9fef6ba4 | 6168 | * below complements the conversion of ADV_SCSI_REQ_Q.scsiq_ptr' |
51219358 MW |
6169 | * in AdvExeScsiQueue(). |
6170 | */ | |
4b47e464 HR |
6171 | u32 pa_offset = le32_to_cpu(asc_dvc->irq_sp->areq_vpa); |
6172 | ASC_DBG(1, "irq_sp %p areq_vpa %u\n", | |
6173 | asc_dvc->irq_sp, pa_offset); | |
6174 | reqp = adv_get_reqp(asc_dvc, pa_offset); | |
6175 | scsiq = &reqp->scsi_req_q; | |
51219358 MW |
6176 | |
6177 | /* | |
6178 | * Request finished with good status and the queue was not | |
6179 | * DMAed to host memory by the firmware. Set all status fields | |
6180 | * to indicate good status. | |
6181 | */ | |
084e6c36 | 6182 | if ((irq_next_vpa & ADV_RQ_GOOD) != 0) { |
51219358 MW |
6183 | scsiq->done_status = QD_NO_ERROR; |
6184 | scsiq->host_status = scsiq->scsi_status = 0; | |
6185 | scsiq->data_cnt = 0L; | |
6186 | } | |
6187 | ||
6188 | /* | |
6189 | * Advance the stopper pointer to the next carrier | |
6190 | * ignoring the lower four bits. Free the previous | |
6191 | * stopper carrier. | |
6192 | */ | |
6193 | free_carrp = asc_dvc->irq_sp; | |
98b96a7d | 6194 | asc_dvc->irq_sp = adv_get_carrier(asc_dvc, |
084e6c36 | 6195 | ADV_GET_CARRP(irq_next_vpa)); |
51219358 | 6196 | |
98b96a7d | 6197 | free_carrp->next_vpa = asc_dvc->carr_freelist->carr_va; |
51219358 MW |
6198 | asc_dvc->carr_freelist = free_carrp; |
6199 | asc_dvc->carr_pending_cnt--; | |
6200 | ||
6201 | target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id); | |
6202 | ||
6203 | /* | |
6204 | * Clear request microcode control flag. | |
6205 | */ | |
6206 | scsiq->cntl = 0; | |
6207 | ||
6208 | /* | |
6209 | * Notify the driver of the completed request by passing | |
6210 | * the ADV_SCSI_REQ_Q pointer to its callback function. | |
6211 | */ | |
51219358 MW |
6212 | adv_isr_callback(asc_dvc, scsiq); |
6213 | /* | |
6214 | * Note: After the driver callback function is called, 'scsiq' | |
6215 | * can no longer be referenced. | |
6216 | * | |
6217 | * Fall through and continue processing other completed | |
6218 | * requests... | |
6219 | */ | |
6220 | } | |
6221 | return ADV_TRUE; | |
6222 | } | |
6223 | ||
6224 | static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code) | |
6225 | { | |
6226 | if (asc_dvc->err_code == 0) { | |
6227 | asc_dvc->err_code = err_code; | |
6228 | AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W, | |
6229 | err_code); | |
6230 | } | |
6231 | return err_code; | |
6232 | } | |
6233 | ||
6234 | static void AscAckInterrupt(PortAddr iop_base) | |
6235 | { | |
6236 | uchar host_flag; | |
6237 | uchar risc_flag; | |
6238 | ushort loop; | |
6239 | ||
6240 | loop = 0; | |
6241 | do { | |
6242 | risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B); | |
6243 | if (loop++ > 0x7FFF) { | |
6244 | break; | |
6245 | } | |
6246 | } while ((risc_flag & ASC_RISC_FLAG_GEN_INT) != 0); | |
6247 | host_flag = | |
6248 | AscReadLramByte(iop_base, | |
6249 | ASCV_HOST_FLAG_B) & (~ASC_HOST_FLAG_ACK_INT); | |
6250 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, | |
6251 | (uchar)(host_flag | ASC_HOST_FLAG_ACK_INT)); | |
6252 | AscSetChipStatus(iop_base, CIW_INT_ACK); | |
6253 | loop = 0; | |
6254 | while (AscGetChipStatus(iop_base) & CSW_INT_PENDING) { | |
6255 | AscSetChipStatus(iop_base, CIW_INT_ACK); | |
6256 | if (loop++ > 3) { | |
6257 | break; | |
6258 | } | |
6259 | } | |
6260 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); | |
51219358 MW |
6261 | } |
6262 | ||
6263 | static uchar AscGetSynPeriodIndex(ASC_DVC_VAR *asc_dvc, uchar syn_time) | |
6264 | { | |
afbb68c3 | 6265 | const uchar *period_table; |
51219358 MW |
6266 | int max_index; |
6267 | int min_index; | |
6268 | int i; | |
6269 | ||
6270 | period_table = asc_dvc->sdtr_period_tbl; | |
6271 | max_index = (int)asc_dvc->max_sdtr_index; | |
afbb68c3 | 6272 | min_index = (int)asc_dvc->min_sdtr_index; |
51219358 MW |
6273 | if ((syn_time <= period_table[max_index])) { |
6274 | for (i = min_index; i < (max_index - 1); i++) { | |
6275 | if (syn_time <= period_table[i]) { | |
6276 | return (uchar)i; | |
6277 | } | |
6278 | } | |
6279 | return (uchar)max_index; | |
6280 | } else { | |
6281 | return (uchar)(max_index + 1); | |
6282 | } | |
6283 | } | |
6284 | ||
6285 | static uchar | |
6286 | AscMsgOutSDTR(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar sdtr_offset) | |
6287 | { | |
44a5b977 AB |
6288 | PortAddr iop_base = asc_dvc->iop_base; |
6289 | uchar sdtr_period_index = AscGetSynPeriodIndex(asc_dvc, sdtr_period); | |
6290 | EXT_MSG sdtr_buf = { | |
6291 | .msg_type = EXTENDED_MESSAGE, | |
6292 | .msg_len = MS_SDTR_LEN, | |
6293 | .msg_req = EXTENDED_SDTR, | |
6294 | .xfer_period = sdtr_period, | |
6295 | .req_ack_offset = sdtr_offset, | |
6296 | }; | |
51219358 | 6297 | sdtr_offset &= ASC_SYN_MAX_OFFSET; |
44a5b977 | 6298 | |
51219358 MW |
6299 | if (sdtr_period_index <= asc_dvc->max_sdtr_index) { |
6300 | AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, | |
6301 | (uchar *)&sdtr_buf, | |
6302 | sizeof(EXT_MSG) >> 1); | |
6303 | return ((sdtr_period_index << 4) | sdtr_offset); | |
6304 | } else { | |
6305 | sdtr_buf.req_ack_offset = 0; | |
6306 | AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, | |
6307 | (uchar *)&sdtr_buf, | |
6308 | sizeof(EXT_MSG) >> 1); | |
6309 | return 0; | |
6310 | } | |
6311 | } | |
6312 | ||
6313 | static uchar | |
6314 | AscCalSDTRData(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar syn_offset) | |
6315 | { | |
6316 | uchar byte; | |
6317 | uchar sdtr_period_ix; | |
6318 | ||
6319 | sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period); | |
afbb68c3 | 6320 | if (sdtr_period_ix > asc_dvc->max_sdtr_index) |
51219358 | 6321 | return 0xFF; |
51219358 MW |
6322 | byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET); |
6323 | return byte; | |
6324 | } | |
6325 | ||
d647c783 | 6326 | static bool AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data) |
51219358 MW |
6327 | { |
6328 | ASC_SCSI_BIT_ID_TYPE org_id; | |
6329 | int i; | |
d647c783 | 6330 | bool sta = true; |
51219358 MW |
6331 | |
6332 | AscSetBank(iop_base, 1); | |
6333 | org_id = AscReadChipDvcID(iop_base); | |
6334 | for (i = 0; i <= ASC_MAX_TID; i++) { | |
6335 | if (org_id == (0x01 << i)) | |
6336 | break; | |
6337 | } | |
6338 | org_id = (ASC_SCSI_BIT_ID_TYPE) i; | |
6339 | AscWriteChipDvcID(iop_base, id); | |
6340 | if (AscReadChipDvcID(iop_base) == (0x01 << id)) { | |
6341 | AscSetBank(iop_base, 0); | |
6342 | AscSetChipSyn(iop_base, sdtr_data); | |
6343 | if (AscGetChipSyn(iop_base) != sdtr_data) { | |
d647c783 | 6344 | sta = false; |
51219358 MW |
6345 | } |
6346 | } else { | |
d647c783 | 6347 | sta = false; |
51219358 MW |
6348 | } |
6349 | AscSetBank(iop_base, 1); | |
6350 | AscWriteChipDvcID(iop_base, org_id); | |
6351 | AscSetBank(iop_base, 0); | |
6352 | return (sta); | |
6353 | } | |
6354 | ||
6355 | static void AscSetChipSDTR(PortAddr iop_base, uchar sdtr_data, uchar tid_no) | |
6356 | { | |
6357 | AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); | |
6358 | AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data); | |
6359 | } | |
6360 | ||
6f0d2e1d | 6361 | static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
6362 | { |
6363 | EXT_MSG ext_msg; | |
6364 | EXT_MSG out_msg; | |
6365 | ushort halt_q_addr; | |
ae26759e | 6366 | bool sdtr_accept; |
51219358 MW |
6367 | ushort int_halt_code; |
6368 | ASC_SCSI_BIT_ID_TYPE scsi_busy; | |
6369 | ASC_SCSI_BIT_ID_TYPE target_id; | |
6370 | PortAddr iop_base; | |
6371 | uchar tag_code; | |
6372 | uchar q_status; | |
6373 | uchar halt_qp; | |
6374 | uchar sdtr_data; | |
6375 | uchar target_ix; | |
6376 | uchar q_cntl, tid_no; | |
6377 | uchar cur_dvc_qng; | |
6378 | uchar asyn_sdtr; | |
6379 | uchar scsi_status; | |
d2411495 | 6380 | struct asc_board *boardp; |
51219358 MW |
6381 | |
6382 | BUG_ON(!asc_dvc->drv_ptr); | |
6383 | boardp = asc_dvc->drv_ptr; | |
6384 | ||
6385 | iop_base = asc_dvc->iop_base; | |
6386 | int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W); | |
6387 | ||
6388 | halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B); | |
6389 | halt_q_addr = ASC_QNO_TO_QADDR(halt_qp); | |
6390 | target_ix = AscReadLramByte(iop_base, | |
6391 | (ushort)(halt_q_addr + | |
6392 | (ushort)ASC_SCSIQ_B_TARGET_IX)); | |
6393 | q_cntl = AscReadLramByte(iop_base, | |
6394 | (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL)); | |
6395 | tid_no = ASC_TIX_TO_TID(target_ix); | |
6396 | target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no); | |
6397 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { | |
6398 | asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB; | |
6399 | } else { | |
6400 | asyn_sdtr = 0; | |
6401 | } | |
6402 | if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX) { | |
6403 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { | |
6404 | AscSetChipSDTR(iop_base, 0, tid_no); | |
6405 | boardp->sdtr_data[tid_no] = 0; | |
6406 | } | |
6407 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6408 | return; |
51219358 MW |
6409 | } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) { |
6410 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { | |
6411 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); | |
6412 | boardp->sdtr_data[tid_no] = asyn_sdtr; | |
6413 | } | |
6414 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6415 | return; |
51219358 MW |
6416 | } else if (int_halt_code == ASC_HALT_EXTMSG_IN) { |
6417 | AscMemWordCopyPtrFromLram(iop_base, | |
6418 | ASCV_MSGIN_BEG, | |
6419 | (uchar *)&ext_msg, | |
6420 | sizeof(EXT_MSG) >> 1); | |
6421 | ||
6422 | if (ext_msg.msg_type == EXTENDED_MESSAGE && | |
6423 | ext_msg.msg_req == EXTENDED_SDTR && | |
6424 | ext_msg.msg_len == MS_SDTR_LEN) { | |
ae26759e | 6425 | sdtr_accept = true; |
51219358 MW |
6426 | if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) { |
6427 | ||
ae26759e | 6428 | sdtr_accept = false; |
51219358 MW |
6429 | ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET; |
6430 | } | |
6431 | if ((ext_msg.xfer_period < | |
afbb68c3 | 6432 | asc_dvc->sdtr_period_tbl[asc_dvc->min_sdtr_index]) |
51219358 MW |
6433 | || (ext_msg.xfer_period > |
6434 | asc_dvc->sdtr_period_tbl[asc_dvc-> | |
6435 | max_sdtr_index])) { | |
ae26759e | 6436 | sdtr_accept = false; |
51219358 MW |
6437 | ext_msg.xfer_period = |
6438 | asc_dvc->sdtr_period_tbl[asc_dvc-> | |
afbb68c3 | 6439 | min_sdtr_index]; |
51219358 MW |
6440 | } |
6441 | if (sdtr_accept) { | |
6442 | sdtr_data = | |
6443 | AscCalSDTRData(asc_dvc, ext_msg.xfer_period, | |
6444 | ext_msg.req_ack_offset); | |
874deb1c | 6445 | if (sdtr_data == 0xFF) { |
51219358 MW |
6446 | |
6447 | q_cntl |= QC_MSG_OUT; | |
6448 | asc_dvc->init_sdtr &= ~target_id; | |
6449 | asc_dvc->sdtr_done &= ~target_id; | |
6450 | AscSetChipSDTR(iop_base, asyn_sdtr, | |
6451 | tid_no); | |
6452 | boardp->sdtr_data[tid_no] = asyn_sdtr; | |
6453 | } | |
6454 | } | |
6455 | if (ext_msg.req_ack_offset == 0) { | |
6456 | ||
6457 | q_cntl &= ~QC_MSG_OUT; | |
6458 | asc_dvc->init_sdtr &= ~target_id; | |
6459 | asc_dvc->sdtr_done &= ~target_id; | |
6460 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); | |
6461 | } else { | |
6462 | if (sdtr_accept && (q_cntl & QC_MSG_OUT)) { | |
51219358 MW |
6463 | q_cntl &= ~QC_MSG_OUT; |
6464 | asc_dvc->sdtr_done |= target_id; | |
6465 | asc_dvc->init_sdtr |= target_id; | |
6466 | asc_dvc->pci_fix_asyn_xfer &= | |
6467 | ~target_id; | |
6468 | sdtr_data = | |
6469 | AscCalSDTRData(asc_dvc, | |
6470 | ext_msg.xfer_period, | |
6471 | ext_msg. | |
6472 | req_ack_offset); | |
6473 | AscSetChipSDTR(iop_base, sdtr_data, | |
6474 | tid_no); | |
6475 | boardp->sdtr_data[tid_no] = sdtr_data; | |
6476 | } else { | |
51219358 MW |
6477 | q_cntl |= QC_MSG_OUT; |
6478 | AscMsgOutSDTR(asc_dvc, | |
6479 | ext_msg.xfer_period, | |
6480 | ext_msg.req_ack_offset); | |
6481 | asc_dvc->pci_fix_asyn_xfer &= | |
6482 | ~target_id; | |
6483 | sdtr_data = | |
6484 | AscCalSDTRData(asc_dvc, | |
6485 | ext_msg.xfer_period, | |
6486 | ext_msg. | |
6487 | req_ack_offset); | |
6488 | AscSetChipSDTR(iop_base, sdtr_data, | |
6489 | tid_no); | |
6490 | boardp->sdtr_data[tid_no] = sdtr_data; | |
6491 | asc_dvc->sdtr_done |= target_id; | |
6492 | asc_dvc->init_sdtr |= target_id; | |
6493 | } | |
6494 | } | |
6495 | ||
6496 | AscWriteLramByte(iop_base, | |
6497 | (ushort)(halt_q_addr + | |
6498 | (ushort)ASC_SCSIQ_B_CNTL), | |
6499 | q_cntl); | |
6500 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6501 | return; |
51219358 MW |
6502 | } else if (ext_msg.msg_type == EXTENDED_MESSAGE && |
6503 | ext_msg.msg_req == EXTENDED_WDTR && | |
6504 | ext_msg.msg_len == MS_WDTR_LEN) { | |
6505 | ||
6506 | ext_msg.wdtr_width = 0; | |
6507 | AscMemWordCopyPtrToLram(iop_base, | |
6508 | ASCV_MSGOUT_BEG, | |
6509 | (uchar *)&ext_msg, | |
6510 | sizeof(EXT_MSG) >> 1); | |
6511 | q_cntl |= QC_MSG_OUT; | |
6512 | AscWriteLramByte(iop_base, | |
6513 | (ushort)(halt_q_addr + | |
6514 | (ushort)ASC_SCSIQ_B_CNTL), | |
6515 | q_cntl); | |
6516 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6517 | return; |
51219358 MW |
6518 | } else { |
6519 | ||
6520 | ext_msg.msg_type = MESSAGE_REJECT; | |
6521 | AscMemWordCopyPtrToLram(iop_base, | |
6522 | ASCV_MSGOUT_BEG, | |
6523 | (uchar *)&ext_msg, | |
6524 | sizeof(EXT_MSG) >> 1); | |
6525 | q_cntl |= QC_MSG_OUT; | |
6526 | AscWriteLramByte(iop_base, | |
6527 | (ushort)(halt_q_addr + | |
6528 | (ushort)ASC_SCSIQ_B_CNTL), | |
6529 | q_cntl); | |
6530 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6531 | return; |
51219358 MW |
6532 | } |
6533 | } else if (int_halt_code == ASC_HALT_CHK_CONDITION) { | |
6534 | ||
6535 | q_cntl |= QC_REQ_SENSE; | |
6536 | ||
6537 | if ((asc_dvc->init_sdtr & target_id) != 0) { | |
6538 | ||
6539 | asc_dvc->sdtr_done &= ~target_id; | |
6540 | ||
6541 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); | |
6542 | q_cntl |= QC_MSG_OUT; | |
6543 | AscMsgOutSDTR(asc_dvc, | |
6544 | asc_dvc-> | |
6545 | sdtr_period_tbl[(sdtr_data >> 4) & | |
6546 | (uchar)(asc_dvc-> | |
6547 | max_sdtr_index - | |
6548 | 1)], | |
6549 | (uchar)(sdtr_data & (uchar) | |
6550 | ASC_SYN_MAX_OFFSET)); | |
6551 | } | |
6552 | ||
6553 | AscWriteLramByte(iop_base, | |
6554 | (ushort)(halt_q_addr + | |
6555 | (ushort)ASC_SCSIQ_B_CNTL), q_cntl); | |
6556 | ||
6557 | tag_code = AscReadLramByte(iop_base, | |
6558 | (ushort)(halt_q_addr + (ushort) | |
6559 | ASC_SCSIQ_B_TAG_CODE)); | |
6560 | tag_code &= 0xDC; | |
6561 | if ((asc_dvc->pci_fix_asyn_xfer & target_id) | |
6562 | && !(asc_dvc->pci_fix_asyn_xfer_always & target_id) | |
6563 | ) { | |
6564 | ||
6565 | tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT | |
6566 | | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX); | |
6567 | ||
6568 | } | |
6569 | AscWriteLramByte(iop_base, | |
6570 | (ushort)(halt_q_addr + | |
6571 | (ushort)ASC_SCSIQ_B_TAG_CODE), | |
6572 | tag_code); | |
6573 | ||
6574 | q_status = AscReadLramByte(iop_base, | |
6575 | (ushort)(halt_q_addr + (ushort) | |
6576 | ASC_SCSIQ_B_STATUS)); | |
6577 | q_status |= (QS_READY | QS_BUSY); | |
6578 | AscWriteLramByte(iop_base, | |
6579 | (ushort)(halt_q_addr + | |
6580 | (ushort)ASC_SCSIQ_B_STATUS), | |
6581 | q_status); | |
6582 | ||
6583 | scsi_busy = AscReadLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B); | |
6584 | scsi_busy &= ~target_id; | |
6585 | AscWriteLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B, scsi_busy); | |
6586 | ||
6587 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6588 | return; |
51219358 MW |
6589 | } else if (int_halt_code == ASC_HALT_SDTR_REJECTED) { |
6590 | ||
6591 | AscMemWordCopyPtrFromLram(iop_base, | |
6592 | ASCV_MSGOUT_BEG, | |
6593 | (uchar *)&out_msg, | |
6594 | sizeof(EXT_MSG) >> 1); | |
6595 | ||
6596 | if ((out_msg.msg_type == EXTENDED_MESSAGE) && | |
6597 | (out_msg.msg_len == MS_SDTR_LEN) && | |
6598 | (out_msg.msg_req == EXTENDED_SDTR)) { | |
6599 | ||
6600 | asc_dvc->init_sdtr &= ~target_id; | |
6601 | asc_dvc->sdtr_done &= ~target_id; | |
6602 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); | |
6603 | boardp->sdtr_data[tid_no] = asyn_sdtr; | |
6604 | } | |
6605 | q_cntl &= ~QC_MSG_OUT; | |
6606 | AscWriteLramByte(iop_base, | |
6607 | (ushort)(halt_q_addr + | |
6608 | (ushort)ASC_SCSIQ_B_CNTL), q_cntl); | |
6609 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6610 | return; |
51219358 MW |
6611 | } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) { |
6612 | ||
6613 | scsi_status = AscReadLramByte(iop_base, | |
6614 | (ushort)((ushort)halt_q_addr + | |
6615 | (ushort) | |
6616 | ASC_SCSIQ_SCSI_STATUS)); | |
6617 | cur_dvc_qng = | |
6618 | AscReadLramByte(iop_base, | |
6619 | (ushort)((ushort)ASC_QADR_BEG + | |
6620 | (ushort)target_ix)); | |
6621 | if ((cur_dvc_qng > 0) && (asc_dvc->cur_dvc_qng[tid_no] > 0)) { | |
6622 | ||
6623 | scsi_busy = AscReadLramByte(iop_base, | |
6624 | (ushort)ASCV_SCSIBUSY_B); | |
6625 | scsi_busy |= target_id; | |
6626 | AscWriteLramByte(iop_base, | |
6627 | (ushort)ASCV_SCSIBUSY_B, scsi_busy); | |
6628 | asc_dvc->queue_full_or_busy |= target_id; | |
6629 | ||
6630 | if (scsi_status == SAM_STAT_TASK_SET_FULL) { | |
6631 | if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) { | |
6632 | cur_dvc_qng -= 1; | |
6633 | asc_dvc->max_dvc_qng[tid_no] = | |
6634 | cur_dvc_qng; | |
6635 | ||
6636 | AscWriteLramByte(iop_base, | |
6637 | (ushort)((ushort) | |
6638 | ASCV_MAX_DVC_QNG_BEG | |
6639 | + (ushort) | |
6640 | tid_no), | |
6641 | cur_dvc_qng); | |
6642 | ||
6643 | /* | |
6644 | * Set the device queue depth to the | |
6645 | * number of active requests when the | |
6646 | * QUEUE FULL condition was encountered. | |
6647 | */ | |
6648 | boardp->queue_full |= target_id; | |
6649 | boardp->queue_full_cnt[tid_no] = | |
6650 | cur_dvc_qng; | |
6651 | } | |
6652 | } | |
6653 | } | |
6654 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); | |
6f0d2e1d | 6655 | return; |
51219358 | 6656 | } |
6f0d2e1d | 6657 | return; |
51219358 | 6658 | } |
1da177e4 | 6659 | |
1da177e4 | 6660 | /* |
51219358 MW |
6661 | * void |
6662 | * DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) | |
1da177e4 | 6663 | * |
51219358 MW |
6664 | * Calling/Exit State: |
6665 | * none | |
1da177e4 | 6666 | * |
51219358 MW |
6667 | * Description: |
6668 | * Input an ASC_QDONE_INFO structure from the chip | |
1da177e4 | 6669 | */ |
51219358 MW |
6670 | static void |
6671 | DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) | |
6672 | { | |
6673 | int i; | |
6674 | ushort word; | |
6675 | ||
6676 | AscSetChipLramAddr(iop_base, s_addr); | |
6677 | for (i = 0; i < 2 * words; i += 2) { | |
6678 | if (i == 10) { | |
6679 | continue; | |
6680 | } | |
6681 | word = inpw(iop_base + IOP_RAM_DATA); | |
6682 | inbuf[i] = word & 0xff; | |
6683 | inbuf[i + 1] = (word >> 8) & 0xff; | |
6684 | } | |
6685 | ASC_DBG_PRT_HEX(2, "DvcGetQinfo", inbuf, 2 * words); | |
6686 | } | |
6687 | ||
6688 | static uchar | |
6689 | _AscCopyLramScsiDoneQ(PortAddr iop_base, | |
6690 | ushort q_addr, | |
95cfab6c | 6691 | ASC_QDONE_INFO *scsiq, unsigned int max_dma_count) |
51219358 MW |
6692 | { |
6693 | ushort _val; | |
6694 | uchar sg_queue_cnt; | |
6695 | ||
6696 | DvcGetQinfo(iop_base, | |
6697 | q_addr + ASC_SCSIQ_DONE_INFO_BEG, | |
6698 | (uchar *)scsiq, | |
6699 | (sizeof(ASC_SCSIQ_2) + sizeof(ASC_SCSIQ_3)) / 2); | |
6700 | ||
6701 | _val = AscReadLramWord(iop_base, | |
6702 | (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS)); | |
6703 | scsiq->q_status = (uchar)_val; | |
6704 | scsiq->q_no = (uchar)(_val >> 8); | |
6705 | _val = AscReadLramWord(iop_base, | |
6706 | (ushort)(q_addr + (ushort)ASC_SCSIQ_B_CNTL)); | |
6707 | scsiq->cntl = (uchar)_val; | |
6708 | sg_queue_cnt = (uchar)(_val >> 8); | |
6709 | _val = AscReadLramWord(iop_base, | |
6710 | (ushort)(q_addr + | |
6711 | (ushort)ASC_SCSIQ_B_SENSE_LEN)); | |
6712 | scsiq->sense_len = (uchar)_val; | |
6713 | scsiq->extra_bytes = (uchar)(_val >> 8); | |
6714 | ||
6715 | /* | |
6716 | * Read high word of remain bytes from alternate location. | |
6717 | */ | |
95cfab6c HR |
6718 | scsiq->remain_bytes = (((u32)AscReadLramWord(iop_base, |
6719 | (ushort)(q_addr + | |
6720 | (ushort) | |
6721 | ASC_SCSIQ_W_ALT_DC1))) | |
51219358 MW |
6722 | << 16); |
6723 | /* | |
6724 | * Read low word of remain bytes from original location. | |
6725 | */ | |
6726 | scsiq->remain_bytes += AscReadLramWord(iop_base, | |
6727 | (ushort)(q_addr + (ushort) | |
6728 | ASC_SCSIQ_DW_REMAIN_XFER_CNT)); | |
6729 | ||
6730 | scsiq->remain_bytes &= max_dma_count; | |
6731 | return sg_queue_cnt; | |
6732 | } | |
6733 | ||
6734 | /* | |
6735 | * asc_isr_callback() - Second Level Interrupt Handler called by AscISR(). | |
6736 | * | |
6737 | * Interrupt callback function for the Narrow SCSI Asc Library. | |
6738 | */ | |
6739 | static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) | |
6740 | { | |
9c17c62a HR |
6741 | struct asc_board *boardp = asc_dvc_varp->drv_ptr; |
6742 | u32 srb_tag; | |
51219358 | 6743 | struct scsi_cmnd *scp; |
51219358 | 6744 | |
b352f923 | 6745 | ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep); |
51219358 MW |
6746 | ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep); |
6747 | ||
9c17c62a HR |
6748 | /* |
6749 | * Decrease the srb_tag by 1 to find the SCSI command | |
6750 | */ | |
6751 | srb_tag = qdonep->d2.srb_tag - 1; | |
6752 | scp = scsi_host_find_tag(boardp->shost, srb_tag); | |
b249c7fd | 6753 | if (!scp) |
51219358 | 6754 | return; |
b249c7fd | 6755 | |
51219358 MW |
6756 | ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); |
6757 | ||
9c17c62a | 6758 | ASC_STATS(boardp->shost, callback); |
51219358 | 6759 | |
b249c7fd | 6760 | dma_unmap_single(boardp->dev, scp->SCp.dma_handle, |
b80ca4f7 | 6761 | SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); |
51219358 MW |
6762 | /* |
6763 | * 'qdonep' contains the command's ending status. | |
6764 | */ | |
6765 | switch (qdonep->d3.done_stat) { | |
6766 | case QD_NO_ERROR: | |
b352f923 | 6767 | ASC_DBG(2, "QD_NO_ERROR\n"); |
51219358 MW |
6768 | scp->result = 0; |
6769 | ||
6770 | /* | |
6771 | * Check for an underrun condition. | |
6772 | * | |
6773 | * If there was no error and an underrun condition, then | |
6774 | * return the number of underrun bytes. | |
6775 | */ | |
52c334e9 MW |
6776 | if (scsi_bufflen(scp) != 0 && qdonep->remain_bytes != 0 && |
6777 | qdonep->remain_bytes <= scsi_bufflen(scp)) { | |
b352f923 | 6778 | ASC_DBG(1, "underrun condition %u bytes\n", |
51219358 | 6779 | (unsigned)qdonep->remain_bytes); |
52c334e9 | 6780 | scsi_set_resid(scp, qdonep->remain_bytes); |
51219358 MW |
6781 | } |
6782 | break; | |
6783 | ||
6784 | case QD_WITH_ERROR: | |
b352f923 | 6785 | ASC_DBG(2, "QD_WITH_ERROR\n"); |
51219358 MW |
6786 | switch (qdonep->d3.host_stat) { |
6787 | case QHSTA_NO_ERROR: | |
6788 | if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) { | |
b352f923 | 6789 | ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); |
51219358 | 6790 | ASC_DBG_PRT_SENSE(2, scp->sense_buffer, |
b80ca4f7 | 6791 | SCSI_SENSE_BUFFERSIZE); |
51219358 MW |
6792 | /* |
6793 | * Note: The 'status_byte()' macro used by | |
6794 | * target drivers defined in scsi.h shifts the | |
6795 | * status byte returned by host drivers right | |
6796 | * by 1 bit. This is why target drivers also | |
6797 | * use right shifted status byte definitions. | |
6798 | * For instance target drivers use | |
6799 | * CHECK_CONDITION, defined to 0x1, instead of | |
6800 | * the SCSI defined check condition value of | |
6801 | * 0x2. Host drivers are supposed to return | |
6802 | * the status byte as it is defined by SCSI. | |
6803 | */ | |
6804 | scp->result = DRIVER_BYTE(DRIVER_SENSE) | | |
6805 | STATUS_BYTE(qdonep->d3.scsi_stat); | |
6806 | } else { | |
6807 | scp->result = STATUS_BYTE(qdonep->d3.scsi_stat); | |
6808 | } | |
6809 | break; | |
6810 | ||
6811 | default: | |
6812 | /* QHSTA error occurred */ | |
b352f923 | 6813 | ASC_DBG(1, "host_stat 0x%x\n", qdonep->d3.host_stat); |
51219358 MW |
6814 | scp->result = HOST_BYTE(DID_BAD_TARGET); |
6815 | break; | |
6816 | } | |
6817 | break; | |
6818 | ||
6819 | case QD_ABORTED_BY_HOST: | |
b352f923 | 6820 | ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); |
51219358 MW |
6821 | scp->result = |
6822 | HOST_BYTE(DID_ABORT) | MSG_BYTE(qdonep->d3. | |
6823 | scsi_msg) | | |
6824 | STATUS_BYTE(qdonep->d3.scsi_stat); | |
6825 | break; | |
6826 | ||
6827 | default: | |
b352f923 | 6828 | ASC_DBG(1, "done_stat 0x%x\n", qdonep->d3.done_stat); |
51219358 MW |
6829 | scp->result = |
6830 | HOST_BYTE(DID_ERROR) | MSG_BYTE(qdonep->d3. | |
6831 | scsi_msg) | | |
6832 | STATUS_BYTE(qdonep->d3.scsi_stat); | |
6833 | break; | |
6834 | } | |
6835 | ||
6836 | /* | |
6837 | * If the 'init_tidmask' bit isn't already set for the target and the | |
6838 | * current request finished normally, then set the bit for the target | |
6839 | * to indicate that a device is present. | |
6840 | */ | |
6841 | if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && | |
6842 | qdonep->d3.done_stat == QD_NO_ERROR && | |
6843 | qdonep->d3.host_stat == QHSTA_NO_ERROR) { | |
6844 | boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); | |
6845 | } | |
1da177e4 | 6846 | |
51219358 | 6847 | asc_scsi_done(scp); |
51219358 MW |
6848 | } |
6849 | ||
6850 | static int AscIsrQDone(ASC_DVC_VAR *asc_dvc) | |
6851 | { | |
6852 | uchar next_qp; | |
6853 | uchar n_q_used; | |
6854 | uchar sg_list_qp; | |
6855 | uchar sg_queue_cnt; | |
6856 | uchar q_cnt; | |
6857 | uchar done_q_tail; | |
6858 | uchar tid_no; | |
6859 | ASC_SCSI_BIT_ID_TYPE scsi_busy; | |
6860 | ASC_SCSI_BIT_ID_TYPE target_id; | |
6861 | PortAddr iop_base; | |
6862 | ushort q_addr; | |
6863 | ushort sg_q_addr; | |
6864 | uchar cur_target_qng; | |
6865 | ASC_QDONE_INFO scsiq_buf; | |
6866 | ASC_QDONE_INFO *scsiq; | |
ae26759e | 6867 | bool false_overrun; |
51219358 MW |
6868 | |
6869 | iop_base = asc_dvc->iop_base; | |
6870 | n_q_used = 1; | |
6871 | scsiq = (ASC_QDONE_INFO *)&scsiq_buf; | |
6872 | done_q_tail = (uchar)AscGetVarDoneQTail(iop_base); | |
6873 | q_addr = ASC_QNO_TO_QADDR(done_q_tail); | |
6874 | next_qp = AscReadLramByte(iop_base, | |
6875 | (ushort)(q_addr + (ushort)ASC_SCSIQ_B_FWD)); | |
6876 | if (next_qp != ASC_QLINK_END) { | |
6877 | AscPutVarDoneQTail(iop_base, next_qp); | |
6878 | q_addr = ASC_QNO_TO_QADDR(next_qp); | |
6879 | sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, | |
6880 | asc_dvc->max_dma_count); | |
6881 | AscWriteLramByte(iop_base, | |
6882 | (ushort)(q_addr + | |
6883 | (ushort)ASC_SCSIQ_B_STATUS), | |
6884 | (uchar)(scsiq-> | |
6885 | q_status & (uchar)~(QS_READY | | |
6886 | QS_ABORTED))); | |
6887 | tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix); | |
6888 | target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix); | |
6889 | if ((scsiq->cntl & QC_SG_HEAD) != 0) { | |
6890 | sg_q_addr = q_addr; | |
6891 | sg_list_qp = next_qp; | |
6892 | for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) { | |
6893 | sg_list_qp = AscReadLramByte(iop_base, | |
6894 | (ushort)(sg_q_addr | |
6895 | + (ushort) | |
6896 | ASC_SCSIQ_B_FWD)); | |
6897 | sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp); | |
6898 | if (sg_list_qp == ASC_QLINK_END) { | |
6899 | AscSetLibErrorCode(asc_dvc, | |
6900 | ASCQ_ERR_SG_Q_LINKS); | |
6901 | scsiq->d3.done_stat = QD_WITH_ERROR; | |
6902 | scsiq->d3.host_stat = | |
6903 | QHSTA_D_QDONE_SG_LIST_CORRUPTED; | |
6904 | goto FATAL_ERR_QDONE; | |
6905 | } | |
6906 | AscWriteLramByte(iop_base, | |
6907 | (ushort)(sg_q_addr + (ushort) | |
6908 | ASC_SCSIQ_B_STATUS), | |
6909 | QS_FREE); | |
6910 | } | |
6911 | n_q_used = sg_queue_cnt + 1; | |
6912 | AscPutVarDoneQTail(iop_base, sg_list_qp); | |
6913 | } | |
6914 | if (asc_dvc->queue_full_or_busy & target_id) { | |
6915 | cur_target_qng = AscReadLramByte(iop_base, | |
6916 | (ushort)((ushort) | |
6917 | ASC_QADR_BEG | |
6918 | + (ushort) | |
6919 | scsiq->d2. | |
6920 | target_ix)); | |
6921 | if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) { | |
6922 | scsi_busy = AscReadLramByte(iop_base, (ushort) | |
6923 | ASCV_SCSIBUSY_B); | |
6924 | scsi_busy &= ~target_id; | |
6925 | AscWriteLramByte(iop_base, | |
6926 | (ushort)ASCV_SCSIBUSY_B, | |
6927 | scsi_busy); | |
6928 | asc_dvc->queue_full_or_busy &= ~target_id; | |
6929 | } | |
6930 | } | |
6931 | if (asc_dvc->cur_total_qng >= n_q_used) { | |
6932 | asc_dvc->cur_total_qng -= n_q_used; | |
6933 | if (asc_dvc->cur_dvc_qng[tid_no] != 0) { | |
6934 | asc_dvc->cur_dvc_qng[tid_no]--; | |
6935 | } | |
6936 | } else { | |
6937 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG); | |
6938 | scsiq->d3.done_stat = QD_WITH_ERROR; | |
6939 | goto FATAL_ERR_QDONE; | |
6940 | } | |
9c17c62a | 6941 | if ((scsiq->d2.srb_tag == 0UL) || |
51219358 MW |
6942 | ((scsiq->q_status & QS_ABORTED) != 0)) { |
6943 | return (0x11); | |
6944 | } else if (scsiq->q_status == QS_DONE) { | |
ae26759e HR |
6945 | /* |
6946 | * This is also curious. | |
6947 | * false_overrun will _always_ be set to 'false' | |
6948 | */ | |
6949 | false_overrun = false; | |
51219358 | 6950 | if (scsiq->extra_bytes != 0) { |
95cfab6c | 6951 | scsiq->remain_bytes += scsiq->extra_bytes; |
51219358 MW |
6952 | } |
6953 | if (scsiq->d3.done_stat == QD_WITH_ERROR) { | |
6954 | if (scsiq->d3.host_stat == | |
6955 | QHSTA_M_DATA_OVER_RUN) { | |
6956 | if ((scsiq-> | |
6957 | cntl & (QC_DATA_IN | QC_DATA_OUT)) | |
6958 | == 0) { | |
6959 | scsiq->d3.done_stat = | |
6960 | QD_NO_ERROR; | |
6961 | scsiq->d3.host_stat = | |
6962 | QHSTA_NO_ERROR; | |
6963 | } else if (false_overrun) { | |
6964 | scsiq->d3.done_stat = | |
6965 | QD_NO_ERROR; | |
6966 | scsiq->d3.host_stat = | |
6967 | QHSTA_NO_ERROR; | |
6968 | } | |
6969 | } else if (scsiq->d3.host_stat == | |
6970 | QHSTA_M_HUNG_REQ_SCSI_BUS_RESET) { | |
6971 | AscStopChip(iop_base); | |
6972 | AscSetChipControl(iop_base, | |
6973 | (uchar)(CC_SCSI_RESET | |
6974 | | CC_HALT)); | |
6975 | udelay(60); | |
6976 | AscSetChipControl(iop_base, CC_HALT); | |
6977 | AscSetChipStatus(iop_base, | |
6978 | CIW_CLR_SCSI_RESET_INT); | |
6979 | AscSetChipStatus(iop_base, 0); | |
6980 | AscSetChipControl(iop_base, 0); | |
6981 | } | |
6982 | } | |
6983 | if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { | |
6984 | asc_isr_callback(asc_dvc, scsiq); | |
6985 | } else { | |
6986 | if ((AscReadLramByte(iop_base, | |
6987 | (ushort)(q_addr + (ushort) | |
6988 | ASC_SCSIQ_CDB_BEG)) | |
6989 | == START_STOP)) { | |
6990 | asc_dvc->unit_not_ready &= ~target_id; | |
6991 | if (scsiq->d3.done_stat != QD_NO_ERROR) { | |
6992 | asc_dvc->start_motor &= | |
6993 | ~target_id; | |
6994 | } | |
6995 | } | |
6996 | } | |
6997 | return (1); | |
6998 | } else { | |
6999 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS); | |
7000 | FATAL_ERR_QDONE: | |
7001 | if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { | |
7002 | asc_isr_callback(asc_dvc, scsiq); | |
7003 | } | |
7004 | return (0x80); | |
7005 | } | |
7006 | } | |
7007 | return (0); | |
7008 | } | |
1da177e4 | 7009 | |
51219358 MW |
7010 | static int AscISR(ASC_DVC_VAR *asc_dvc) |
7011 | { | |
7012 | ASC_CS_TYPE chipstat; | |
7013 | PortAddr iop_base; | |
7014 | ushort saved_ram_addr; | |
7015 | uchar ctrl_reg; | |
7016 | uchar saved_ctrl_reg; | |
7017 | int int_pending; | |
7018 | int status; | |
7019 | uchar host_flag; | |
1da177e4 | 7020 | |
51219358 | 7021 | iop_base = asc_dvc->iop_base; |
ae26759e | 7022 | int_pending = ASC_FALSE; |
1da177e4 | 7023 | |
51219358 MW |
7024 | if (AscIsIntPending(iop_base) == 0) |
7025 | return int_pending; | |
7026 | ||
7027 | if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) { | |
ae26759e | 7028 | return ASC_ERROR; |
51219358 MW |
7029 | } |
7030 | if (asc_dvc->in_critical_cnt != 0) { | |
7031 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL); | |
ae26759e | 7032 | return ASC_ERROR; |
51219358 MW |
7033 | } |
7034 | if (asc_dvc->is_in_int) { | |
7035 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY); | |
ae26759e | 7036 | return ASC_ERROR; |
51219358 | 7037 | } |
ae26759e | 7038 | asc_dvc->is_in_int = true; |
51219358 MW |
7039 | ctrl_reg = AscGetChipControl(iop_base); |
7040 | saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET | | |
7041 | CC_SINGLE_STEP | CC_DIAG | CC_TEST)); | |
7042 | chipstat = AscGetChipStatus(iop_base); | |
7043 | if (chipstat & CSW_SCSI_RESET_LATCH) { | |
7044 | if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) { | |
7045 | int i = 10; | |
ae26759e | 7046 | int_pending = ASC_TRUE; |
51219358 MW |
7047 | asc_dvc->sdtr_done = 0; |
7048 | saved_ctrl_reg &= (uchar)(~CC_HALT); | |
7049 | while ((AscGetChipStatus(iop_base) & | |
7050 | CSW_SCSI_RESET_ACTIVE) && (i-- > 0)) { | |
7051 | mdelay(100); | |
7052 | } | |
7053 | AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT)); | |
7054 | AscSetChipControl(iop_base, CC_HALT); | |
7055 | AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); | |
7056 | AscSetChipStatus(iop_base, 0); | |
7057 | chipstat = AscGetChipStatus(iop_base); | |
7058 | } | |
7059 | } | |
7060 | saved_ram_addr = AscGetChipLramAddr(iop_base); | |
7061 | host_flag = AscReadLramByte(iop_base, | |
7062 | ASCV_HOST_FLAG_B) & | |
7063 | (uchar)(~ASC_HOST_FLAG_IN_ISR); | |
7064 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, | |
7065 | (uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR)); | |
7066 | if ((chipstat & CSW_INT_PENDING) || (int_pending)) { | |
7067 | AscAckInterrupt(iop_base); | |
ae26759e | 7068 | int_pending = ASC_TRUE; |
51219358 | 7069 | if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) { |
6f0d2e1d HR |
7070 | AscIsrChipHalted(asc_dvc); |
7071 | saved_ctrl_reg &= (uchar)(~CC_HALT); | |
51219358 | 7072 | } else { |
51219358 MW |
7073 | if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) { |
7074 | while (((status = | |
7075 | AscIsrQDone(asc_dvc)) & 0x01) != 0) { | |
7076 | } | |
7077 | } else { | |
7078 | do { | |
7079 | if ((status = | |
7080 | AscIsrQDone(asc_dvc)) == 1) { | |
7081 | break; | |
7082 | } | |
7083 | } while (status == 0x11); | |
7084 | } | |
7085 | if ((status & 0x80) != 0) | |
ae26759e | 7086 | int_pending = ASC_ERROR; |
51219358 MW |
7087 | } |
7088 | } | |
7089 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); | |
7090 | AscSetChipLramAddr(iop_base, saved_ram_addr); | |
7091 | AscSetChipControl(iop_base, saved_ctrl_reg); | |
ae26759e | 7092 | asc_dvc->is_in_int = false; |
51219358 MW |
7093 | return int_pending; |
7094 | } | |
1da177e4 LT |
7095 | |
7096 | /* | |
51219358 | 7097 | * advansys_reset() |
1da177e4 | 7098 | * |
eac0b0c7 | 7099 | * Reset the host associated with the command 'scp'. |
1da177e4 | 7100 | * |
51219358 MW |
7101 | * This function runs its own thread. Interrupts must be blocked but |
7102 | * sleeping is allowed and no locking other than for host structures is | |
7103 | * required. Returns SUCCESS or FAILED. | |
1da177e4 | 7104 | */ |
51219358 | 7105 | static int advansys_reset(struct scsi_cmnd *scp) |
1da177e4 | 7106 | { |
52fa0777 | 7107 | struct Scsi_Host *shost = scp->device->host; |
d2411495 | 7108 | struct asc_board *boardp = shost_priv(shost); |
52fa0777 | 7109 | unsigned long flags; |
27c868c2 | 7110 | int status; |
51219358 | 7111 | int ret = SUCCESS; |
27c868c2 | 7112 | |
b352f923 | 7113 | ASC_DBG(1, "0x%p\n", scp); |
27c868c2 | 7114 | |
52fa0777 | 7115 | ASC_STATS(shost, reset); |
27c868c2 | 7116 | |
eac0b0c7 | 7117 | scmd_printk(KERN_INFO, scp, "SCSI host reset started...\n"); |
51219358 MW |
7118 | |
7119 | if (ASC_NARROW_BOARD(boardp)) { | |
52fa0777 | 7120 | ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; |
1da177e4 | 7121 | |
52fa0777 | 7122 | /* Reset the chip and SCSI bus. */ |
b352f923 | 7123 | ASC_DBG(1, "before AscInitAsc1000Driver()\n"); |
52fa0777 | 7124 | status = AscInitAsc1000Driver(asc_dvc); |
27c868c2 | 7125 | |
6070d81e | 7126 | /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */ |
9a908c1a | 7127 | if (asc_dvc->err_code || !asc_dvc->overrun_dma) { |
eac0b0c7 | 7128 | scmd_printk(KERN_INFO, scp, "SCSI host reset error: " |
9a908c1a HRK |
7129 | "0x%x, status: 0x%x\n", asc_dvc->err_code, |
7130 | status); | |
51219358 MW |
7131 | ret = FAILED; |
7132 | } else if (status) { | |
eac0b0c7 | 7133 | scmd_printk(KERN_INFO, scp, "SCSI host reset warning: " |
52fa0777 | 7134 | "0x%x\n", status); |
27c868c2 | 7135 | } else { |
eac0b0c7 | 7136 | scmd_printk(KERN_INFO, scp, "SCSI host reset " |
52fa0777 | 7137 | "successful\n"); |
27c868c2 | 7138 | } |
a9f4a59a | 7139 | |
b352f923 | 7140 | ASC_DBG(1, "after AscInitAsc1000Driver()\n"); |
a9f4a59a | 7141 | } else { |
a9f4a59a | 7142 | /* |
51219358 MW |
7143 | * If the suggest reset bus flags are set, then reset the bus. |
7144 | * Otherwise only reset the device. | |
a9f4a59a | 7145 | */ |
52fa0777 | 7146 | ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; |
a9f4a59a MW |
7147 | |
7148 | /* | |
eac0b0c7 | 7149 | * Reset the chip and SCSI bus. |
a9f4a59a | 7150 | */ |
b352f923 | 7151 | ASC_DBG(1, "before AdvResetChipAndSB()\n"); |
52fa0777 | 7152 | switch (AdvResetChipAndSB(adv_dvc)) { |
51219358 | 7153 | case ASC_TRUE: |
eac0b0c7 | 7154 | scmd_printk(KERN_INFO, scp, "SCSI host reset " |
52fa0777 | 7155 | "successful\n"); |
51219358 MW |
7156 | break; |
7157 | case ASC_FALSE: | |
7158 | default: | |
eac0b0c7 | 7159 | scmd_printk(KERN_INFO, scp, "SCSI host reset error\n"); |
51219358 MW |
7160 | ret = FAILED; |
7161 | break; | |
b9d96614 | 7162 | } |
f092d229 | 7163 | spin_lock_irqsave(shost->host_lock, flags); |
52fa0777 | 7164 | AdvISR(adv_dvc); |
eac0b0c7 | 7165 | spin_unlock_irqrestore(shost->host_lock, flags); |
b9d96614 MW |
7166 | } |
7167 | ||
b352f923 | 7168 | ASC_DBG(1, "ret %d\n", ret); |
b9d96614 | 7169 | |
51219358 | 7170 | return ret; |
b9d96614 MW |
7171 | } |
7172 | ||
1da177e4 | 7173 | /* |
51219358 | 7174 | * advansys_biosparam() |
1da177e4 | 7175 | * |
51219358 MW |
7176 | * Translate disk drive geometry if the "BIOS greater than 1 GB" |
7177 | * support is enabled for a drive. | |
1da177e4 | 7178 | * |
51219358 MW |
7179 | * ip (information pointer) is an int array with the following definition: |
7180 | * ip[0]: heads | |
7181 | * ip[1]: sectors | |
7182 | * ip[2]: cylinders | |
1da177e4 | 7183 | */ |
51219358 MW |
7184 | static int |
7185 | advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev, | |
7186 | sector_t capacity, int ip[]) | |
1da177e4 | 7187 | { |
d2411495 | 7188 | struct asc_board *boardp = shost_priv(sdev->host); |
1da177e4 | 7189 | |
b352f923 | 7190 | ASC_DBG(1, "begin\n"); |
51219358 | 7191 | ASC_STATS(sdev->host, biosparam); |
51219358 MW |
7192 | if (ASC_NARROW_BOARD(boardp)) { |
7193 | if ((boardp->dvc_var.asc_dvc_var.dvc_cntl & | |
7194 | ASC_CNTL_BIOS_GT_1GB) && capacity > 0x200000) { | |
7195 | ip[0] = 255; | |
7196 | ip[1] = 63; | |
7197 | } else { | |
7198 | ip[0] = 64; | |
7199 | ip[1] = 32; | |
7200 | } | |
7201 | } else { | |
7202 | if ((boardp->dvc_var.adv_dvc_var.bios_ctrl & | |
7203 | BIOS_CTRL_EXTENDED_XLAT) && capacity > 0x200000) { | |
7204 | ip[0] = 255; | |
7205 | ip[1] = 63; | |
7206 | } else { | |
7207 | ip[0] = 64; | |
7208 | ip[1] = 32; | |
7209 | } | |
27c868c2 | 7210 | } |
51219358 | 7211 | ip[2] = (unsigned long)capacity / (ip[0] * ip[1]); |
b352f923 | 7212 | ASC_DBG(1, "end\n"); |
51219358 MW |
7213 | return 0; |
7214 | } | |
1da177e4 | 7215 | |
51219358 MW |
7216 | /* |
7217 | * First-level interrupt handler. | |
7218 | * | |
7219 | * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host. | |
7220 | */ | |
7221 | static irqreturn_t advansys_interrupt(int irq, void *dev_id) | |
7222 | { | |
51219358 | 7223 | struct Scsi_Host *shost = dev_id; |
d2411495 | 7224 | struct asc_board *boardp = shost_priv(shost); |
51219358 | 7225 | irqreturn_t result = IRQ_NONE; |
00742c91 | 7226 | unsigned long flags; |
27c868c2 | 7227 | |
b352f923 | 7228 | ASC_DBG(2, "boardp 0x%p\n", boardp); |
00742c91 | 7229 | spin_lock_irqsave(shost->host_lock, flags); |
51219358 MW |
7230 | if (ASC_NARROW_BOARD(boardp)) { |
7231 | if (AscIsIntPending(shost->io_port)) { | |
7232 | result = IRQ_HANDLED; | |
7233 | ASC_STATS(shost, interrupt); | |
b352f923 | 7234 | ASC_DBG(1, "before AscISR()\n"); |
51219358 MW |
7235 | AscISR(&boardp->dvc_var.asc_dvc_var); |
7236 | } | |
7237 | } else { | |
b352f923 | 7238 | ASC_DBG(1, "before AdvISR()\n"); |
51219358 MW |
7239 | if (AdvISR(&boardp->dvc_var.adv_dvc_var)) { |
7240 | result = IRQ_HANDLED; | |
7241 | ASC_STATS(shost, interrupt); | |
7242 | } | |
27c868c2 | 7243 | } |
00742c91 | 7244 | spin_unlock_irqrestore(shost->host_lock, flags); |
1da177e4 | 7245 | |
b352f923 | 7246 | ASC_DBG(1, "end\n"); |
51219358 MW |
7247 | return result; |
7248 | } | |
27c868c2 | 7249 | |
d647c783 | 7250 | static bool AscHostReqRiscHalt(PortAddr iop_base) |
51219358 MW |
7251 | { |
7252 | int count = 0; | |
d647c783 | 7253 | bool sta = false; |
51219358 MW |
7254 | uchar saved_stop_code; |
7255 | ||
7256 | if (AscIsChipHalted(iop_base)) | |
d647c783 | 7257 | return true; |
51219358 MW |
7258 | saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B); |
7259 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, | |
7260 | ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP); | |
7261 | do { | |
7262 | if (AscIsChipHalted(iop_base)) { | |
d647c783 | 7263 | sta = true; |
51219358 | 7264 | break; |
27c868c2 | 7265 | } |
51219358 MW |
7266 | mdelay(100); |
7267 | } while (count++ < 20); | |
7268 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code); | |
d647c783 | 7269 | return sta; |
51219358 | 7270 | } |
1da177e4 | 7271 | |
d647c783 | 7272 | static bool |
51219358 MW |
7273 | AscSetRunChipSynRegAtID(PortAddr iop_base, uchar tid_no, uchar sdtr_data) |
7274 | { | |
d647c783 | 7275 | bool sta = false; |
1da177e4 | 7276 | |
51219358 MW |
7277 | if (AscHostReqRiscHalt(iop_base)) { |
7278 | sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); | |
7279 | AscStartChip(iop_base); | |
27c868c2 | 7280 | } |
51219358 MW |
7281 | return sta; |
7282 | } | |
1da177e4 | 7283 | |
51219358 MW |
7284 | static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev) |
7285 | { | |
7286 | char type = sdev->type; | |
7287 | ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id; | |
27c868c2 | 7288 | |
51219358 MW |
7289 | if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN)) |
7290 | return; | |
7291 | if (asc_dvc->init_sdtr & tid_bits) | |
7292 | return; | |
27c868c2 | 7293 | |
51219358 MW |
7294 | if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0)) |
7295 | asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; | |
27c868c2 | 7296 | |
51219358 MW |
7297 | asc_dvc->pci_fix_asyn_xfer |= tid_bits; |
7298 | if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) || | |
7299 | (type == TYPE_ROM) || (type == TYPE_TAPE)) | |
7300 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; | |
7301 | ||
7302 | if (asc_dvc->pci_fix_asyn_xfer & tid_bits) | |
7303 | AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id, | |
7304 | ASYN_SDTR_DATA_FIX_PCI_REV_AB); | |
7305 | } | |
1da177e4 | 7306 | |
51219358 MW |
7307 | static void |
7308 | advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc) | |
7309 | { | |
7310 | ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id; | |
7311 | ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng; | |
27c868c2 | 7312 | |
51219358 MW |
7313 | if (sdev->lun == 0) { |
7314 | ASC_SCSI_BIT_ID_TYPE orig_init_sdtr = asc_dvc->init_sdtr; | |
7315 | if ((asc_dvc->cfg->sdtr_enable & tid_bit) && sdev->sdtr) { | |
7316 | asc_dvc->init_sdtr |= tid_bit; | |
7317 | } else { | |
7318 | asc_dvc->init_sdtr &= ~tid_bit; | |
7319 | } | |
7320 | ||
7321 | if (orig_init_sdtr != asc_dvc->init_sdtr) | |
7322 | AscAsyncFix(asc_dvc, sdev); | |
27c868c2 | 7323 | } |
1da177e4 | 7324 | |
51219358 MW |
7325 | if (sdev->tagged_supported) { |
7326 | if (asc_dvc->cfg->cmd_qng_enabled & tid_bit) { | |
7327 | if (sdev->lun == 0) { | |
7328 | asc_dvc->cfg->can_tagged_qng |= tid_bit; | |
7329 | asc_dvc->use_tagged_qng |= tid_bit; | |
7330 | } | |
db5ed4df | 7331 | scsi_change_queue_depth(sdev, |
51219358 | 7332 | asc_dvc->max_dvc_qng[sdev->id]); |
27c868c2 | 7333 | } |
51219358 MW |
7334 | } else { |
7335 | if (sdev->lun == 0) { | |
7336 | asc_dvc->cfg->can_tagged_qng &= ~tid_bit; | |
7337 | asc_dvc->use_tagged_qng &= ~tid_bit; | |
27c868c2 MW |
7338 | } |
7339 | } | |
1da177e4 | 7340 | |
51219358 MW |
7341 | if ((sdev->lun == 0) && |
7342 | (orig_use_tagged_qng != asc_dvc->use_tagged_qng)) { | |
7343 | AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B, | |
7344 | asc_dvc->cfg->disc_enable); | |
7345 | AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B, | |
7346 | asc_dvc->use_tagged_qng); | |
7347 | AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B, | |
7348 | asc_dvc->cfg->can_tagged_qng); | |
27c868c2 | 7349 | |
51219358 MW |
7350 | asc_dvc->max_dvc_qng[sdev->id] = |
7351 | asc_dvc->cfg->max_tag_qng[sdev->id]; | |
7352 | AscWriteLramByte(asc_dvc->iop_base, | |
7353 | (ushort)(ASCV_MAX_DVC_QNG_BEG + sdev->id), | |
7354 | asc_dvc->max_dvc_qng[sdev->id]); | |
7355 | } | |
7356 | } | |
27c868c2 | 7357 | |
51219358 MW |
7358 | /* |
7359 | * Wide Transfers | |
7360 | * | |
7361 | * If the EEPROM enabled WDTR for the device and the device supports wide | |
7362 | * bus (16 bit) transfers, then turn on the device's 'wdtr_able' bit and | |
7363 | * write the new value to the microcode. | |
7364 | */ | |
7365 | static void | |
7366 | advansys_wide_enable_wdtr(AdvPortAddr iop_base, unsigned short tidmask) | |
7367 | { | |
7368 | unsigned short cfg_word; | |
7369 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); | |
7370 | if ((cfg_word & tidmask) != 0) | |
7371 | return; | |
27c868c2 | 7372 | |
51219358 MW |
7373 | cfg_word |= tidmask; |
7374 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); | |
27c868c2 MW |
7375 | |
7376 | /* | |
51219358 MW |
7377 | * Clear the microcode SDTR and WDTR negotiation done indicators for |
7378 | * the target to cause it to negotiate with the new setting set above. | |
7379 | * WDTR when accepted causes the target to enter asynchronous mode, so | |
7380 | * SDTR must be negotiated. | |
27c868c2 | 7381 | */ |
51219358 MW |
7382 | AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); |
7383 | cfg_word &= ~tidmask; | |
7384 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); | |
7385 | AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); | |
7386 | cfg_word &= ~tidmask; | |
7387 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); | |
7388 | } | |
1da177e4 | 7389 | |
51219358 MW |
7390 | /* |
7391 | * Synchronous Transfers | |
7392 | * | |
7393 | * If the EEPROM enabled SDTR for the device and the device | |
7394 | * supports synchronous transfers, then turn on the device's | |
7395 | * 'sdtr_able' bit. Write the new value to the microcode. | |
7396 | */ | |
7397 | static void | |
7398 | advansys_wide_enable_sdtr(AdvPortAddr iop_base, unsigned short tidmask) | |
7399 | { | |
7400 | unsigned short cfg_word; | |
7401 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); | |
7402 | if ((cfg_word & tidmask) != 0) | |
7403 | return; | |
1da177e4 | 7404 | |
51219358 MW |
7405 | cfg_word |= tidmask; |
7406 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); | |
1da177e4 | 7407 | |
27c868c2 | 7408 | /* |
51219358 MW |
7409 | * Clear the microcode "SDTR negotiation" done indicator for the |
7410 | * target to cause it to negotiate with the new setting set above. | |
27c868c2 | 7411 | */ |
51219358 MW |
7412 | AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); |
7413 | cfg_word &= ~tidmask; | |
7414 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); | |
7415 | } | |
27c868c2 | 7416 | |
51219358 MW |
7417 | /* |
7418 | * PPR (Parallel Protocol Request) Capable | |
7419 | * | |
7420 | * If the device supports DT mode, then it must be PPR capable. | |
7421 | * The PPR message will be used in place of the SDTR and WDTR | |
7422 | * messages to negotiate synchronous speed and offset, transfer | |
7423 | * width, and protocol options. | |
7424 | */ | |
7425 | static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc, | |
7426 | AdvPortAddr iop_base, unsigned short tidmask) | |
7427 | { | |
7428 | AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); | |
7429 | adv_dvc->ppr_able |= tidmask; | |
7430 | AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); | |
7431 | } | |
27c868c2 | 7432 | |
51219358 MW |
7433 | static void |
7434 | advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc) | |
7435 | { | |
7436 | AdvPortAddr iop_base = adv_dvc->iop_base; | |
7437 | unsigned short tidmask = 1 << sdev->id; | |
7438 | ||
7439 | if (sdev->lun == 0) { | |
7440 | /* | |
7441 | * Handle WDTR, SDTR, and Tag Queuing. If the feature | |
7442 | * is enabled in the EEPROM and the device supports the | |
7443 | * feature, then enable it in the microcode. | |
7444 | */ | |
27c868c2 | 7445 | |
51219358 MW |
7446 | if ((adv_dvc->wdtr_able & tidmask) && sdev->wdtr) |
7447 | advansys_wide_enable_wdtr(iop_base, tidmask); | |
7448 | if ((adv_dvc->sdtr_able & tidmask) && sdev->sdtr) | |
7449 | advansys_wide_enable_sdtr(iop_base, tidmask); | |
7450 | if (adv_dvc->chip_type == ADV_CHIP_ASC38C1600 && sdev->ppr) | |
7451 | advansys_wide_enable_ppr(adv_dvc, iop_base, tidmask); | |
7452 | ||
7453 | /* | |
7454 | * Tag Queuing is disabled for the BIOS which runs in polled | |
7455 | * mode and would see no benefit from Tag Queuing. Also by | |
7456 | * disabling Tag Queuing in the BIOS devices with Tag Queuing | |
7457 | * bugs will at least work with the BIOS. | |
7458 | */ | |
7459 | if ((adv_dvc->tagqng_able & tidmask) && | |
7460 | sdev->tagged_supported) { | |
7461 | unsigned short cfg_word; | |
7462 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word); | |
7463 | cfg_word |= tidmask; | |
7464 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, | |
7465 | cfg_word); | |
7466 | AdvWriteByteLram(iop_base, | |
7467 | ASC_MC_NUMBER_OF_MAX_CMD + sdev->id, | |
7468 | adv_dvc->max_dvc_qng); | |
27c868c2 MW |
7469 | } |
7470 | } | |
1da177e4 | 7471 | |
db5ed4df CH |
7472 | if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported) |
7473 | scsi_change_queue_depth(sdev, adv_dvc->max_dvc_qng); | |
51219358 | 7474 | } |
27c868c2 | 7475 | |
51219358 MW |
7476 | /* |
7477 | * Set the number of commands to queue per device for the | |
7478 | * specified host adapter. | |
7479 | */ | |
7480 | static int advansys_slave_configure(struct scsi_device *sdev) | |
7481 | { | |
d2411495 | 7482 | struct asc_board *boardp = shost_priv(sdev->host); |
27c868c2 | 7483 | |
51219358 MW |
7484 | if (ASC_NARROW_BOARD(boardp)) |
7485 | advansys_narrow_slave_configure(sdev, | |
7486 | &boardp->dvc_var.asc_dvc_var); | |
7487 | else | |
7488 | advansys_wide_slave_configure(sdev, | |
7489 | &boardp->dvc_var.adv_dvc_var); | |
1da177e4 | 7490 | |
51219358 MW |
7491 | return 0; |
7492 | } | |
27c868c2 | 7493 | |
bc31ec4d | 7494 | static __le32 asc_get_sense_buffer_dma(struct scsi_cmnd *scp) |
b249c7fd MW |
7495 | { |
7496 | struct asc_board *board = shost_priv(scp->device->host); | |
bc31ec4d | 7497 | |
b249c7fd | 7498 | scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer, |
bc31ec4d HR |
7499 | SCSI_SENSE_BUFFERSIZE, |
7500 | DMA_FROM_DEVICE); | |
22070634 HR |
7501 | if (dma_mapping_error(board->dev, scp->SCp.dma_handle)) { |
7502 | ASC_DBG(1, "failed to map sense buffer\n"); | |
7503 | return 0; | |
7504 | } | |
b249c7fd MW |
7505 | return cpu_to_le32(scp->SCp.dma_handle); |
7506 | } | |
7507 | ||
d2411495 | 7508 | static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, |
05848b6e | 7509 | struct asc_scsi_q *asc_scsi_q) |
51219358 | 7510 | { |
b249c7fd | 7511 | struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var; |
52c334e9 | 7512 | int use_sg; |
9c17c62a | 7513 | u32 srb_tag; |
52c334e9 | 7514 | |
05848b6e | 7515 | memset(asc_scsi_q, 0, sizeof(*asc_scsi_q)); |
27c868c2 MW |
7516 | |
7517 | /* | |
9c17c62a HR |
7518 | * Set the srb_tag to the command tag + 1, as |
7519 | * srb_tag '0' is used internally by the chip. | |
27c868c2 | 7520 | */ |
9c17c62a HR |
7521 | srb_tag = scp->request->tag + 1; |
7522 | asc_scsi_q->q2.srb_tag = srb_tag; | |
27c868c2 MW |
7523 | |
7524 | /* | |
51219358 | 7525 | * Build the ASC_SCSI_Q request. |
27c868c2 | 7526 | */ |
05848b6e MW |
7527 | asc_scsi_q->cdbptr = &scp->cmnd[0]; |
7528 | asc_scsi_q->q2.cdb_len = scp->cmd_len; | |
7529 | asc_scsi_q->q1.target_id = ASC_TID_TO_TARGET_ID(scp->device->id); | |
7530 | asc_scsi_q->q1.target_lun = scp->device->lun; | |
7531 | asc_scsi_q->q2.target_ix = | |
51219358 | 7532 | ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun); |
bc31ec4d | 7533 | asc_scsi_q->q1.sense_addr = asc_get_sense_buffer_dma(scp); |
b80ca4f7 | 7534 | asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE; |
22070634 HR |
7535 | if (!asc_scsi_q->q1.sense_addr) |
7536 | return ASC_BUSY; | |
27c868c2 MW |
7537 | |
7538 | /* | |
51219358 MW |
7539 | * If there are any outstanding requests for the current target, |
7540 | * then every 255th request send an ORDERED request. This heuristic | |
7541 | * tries to retain the benefit of request sorting while preventing | |
7542 | * request starvation. 255 is the max number of tags or pending commands | |
7543 | * a device may have outstanding. | |
7544 | * | |
7545 | * The request count is incremented below for every successfully | |
7546 | * started request. | |
27c868c2 | 7547 | * |
27c868c2 | 7548 | */ |
b249c7fd | 7549 | if ((asc_dvc->cur_dvc_qng[scp->device->id] > 0) && |
51219358 | 7550 | (boardp->reqcnt[scp->device->id] % 255) == 0) { |
68d81f40 | 7551 | asc_scsi_q->q2.tag_code = ORDERED_QUEUE_TAG; |
51219358 | 7552 | } else { |
68d81f40 | 7553 | asc_scsi_q->q2.tag_code = SIMPLE_QUEUE_TAG; |
51219358 | 7554 | } |
27c868c2 | 7555 | |
52c334e9 MW |
7556 | /* Build ASC_SCSI_Q */ |
7557 | use_sg = scsi_dma_map(scp); | |
22070634 HR |
7558 | if (use_sg < 0) { |
7559 | ASC_DBG(1, "failed to map sglist\n"); | |
7560 | return ASC_BUSY; | |
7561 | } else if (use_sg > 0) { | |
51219358 | 7562 | int sgcnt; |
51219358 | 7563 | struct scatterlist *slp; |
05848b6e | 7564 | struct asc_sg_head *asc_sg_head; |
27c868c2 | 7565 | |
51219358 | 7566 | if (use_sg > scp->device->host->sg_tablesize) { |
9d0e96eb MW |
7567 | scmd_printk(KERN_ERR, scp, "use_sg %d > " |
7568 | "sg_tablesize %d\n", use_sg, | |
7569 | scp->device->host->sg_tablesize); | |
52c334e9 | 7570 | scsi_dma_unmap(scp); |
51219358 MW |
7571 | scp->result = HOST_BYTE(DID_ERROR); |
7572 | return ASC_ERROR; | |
7573 | } | |
27c868c2 | 7574 | |
05848b6e MW |
7575 | asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) + |
7576 | use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC); | |
7577 | if (!asc_sg_head) { | |
52c334e9 | 7578 | scsi_dma_unmap(scp); |
05848b6e MW |
7579 | scp->result = HOST_BYTE(DID_SOFT_ERROR); |
7580 | return ASC_ERROR; | |
7581 | } | |
51219358 | 7582 | |
05848b6e MW |
7583 | asc_scsi_q->q1.cntl |= QC_SG_HEAD; |
7584 | asc_scsi_q->sg_head = asc_sg_head; | |
7585 | asc_scsi_q->q1.data_cnt = 0; | |
7586 | asc_scsi_q->q1.data_addr = 0; | |
51219358 | 7587 | /* This is a byte value, otherwise it would need to be swapped. */ |
05848b6e | 7588 | asc_sg_head->entry_cnt = asc_scsi_q->q1.sg_queue_cnt = use_sg; |
52c334e9 | 7589 | ASC_STATS_ADD(scp->device->host, xfer_elem, |
05848b6e | 7590 | asc_sg_head->entry_cnt); |
51219358 MW |
7591 | |
7592 | /* | |
7593 | * Convert scatter-gather list into ASC_SG_HEAD list. | |
7594 | */ | |
52c334e9 | 7595 | scsi_for_each_sg(scp, slp, use_sg, sgcnt) { |
05848b6e | 7596 | asc_sg_head->sg_list[sgcnt].addr = |
51219358 | 7597 | cpu_to_le32(sg_dma_address(slp)); |
05848b6e | 7598 | asc_sg_head->sg_list[sgcnt].bytes = |
51219358 | 7599 | cpu_to_le32(sg_dma_len(slp)); |
52c334e9 MW |
7600 | ASC_STATS_ADD(scp->device->host, xfer_sect, |
7601 | DIV_ROUND_UP(sg_dma_len(slp), 512)); | |
27c868c2 MW |
7602 | } |
7603 | } | |
1da177e4 | 7604 | |
52c334e9 MW |
7605 | ASC_STATS(scp->device->host, xfer_cnt); |
7606 | ||
b352f923 | 7607 | ASC_DBG_PRT_ASC_SCSI_Q(2, asc_scsi_q); |
51219358 MW |
7608 | ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); |
7609 | ||
7610 | return ASC_NOERROR; | |
27c868c2 | 7611 | } |
1da177e4 | 7612 | |
27c868c2 | 7613 | /* |
51219358 | 7614 | * Build scatter-gather list for Adv Library (Wide Board). |
27c868c2 | 7615 | * |
51219358 MW |
7616 | * Additional ADV_SG_BLOCK structures will need to be allocated |
7617 | * if the total number of scatter-gather elements exceeds | |
7618 | * NO_OF_SG_PER_BLOCK (15). The ADV_SG_BLOCK structures are | |
7619 | * assumed to be physically contiguous. | |
27c868c2 | 7620 | * |
51219358 MW |
7621 | * Return: |
7622 | * ADV_SUCCESS(1) - SG List successfully created | |
7623 | * ADV_ERROR(-1) - SG List creation failed | |
27c868c2 | 7624 | */ |
51219358 | 7625 | static int |
4b47e464 HR |
7626 | adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, |
7627 | ADV_SCSI_REQ_Q *scsiqp, struct scsi_cmnd *scp, int use_sg) | |
27c868c2 | 7628 | { |
0ce53822 | 7629 | adv_sgblk_t *sgblkp, *prev_sgblkp; |
51219358 MW |
7630 | struct scatterlist *slp; |
7631 | int sg_elem_cnt; | |
7632 | ADV_SG_BLOCK *sg_block, *prev_sg_block; | |
0ce53822 | 7633 | dma_addr_t sgblk_paddr; |
27c868c2 | 7634 | int i; |
27c868c2 | 7635 | |
52c334e9 | 7636 | slp = scsi_sglist(scp); |
51219358 | 7637 | sg_elem_cnt = use_sg; |
0ce53822 | 7638 | prev_sgblkp = NULL; |
51219358 MW |
7639 | prev_sg_block = NULL; |
7640 | reqp->sgblkp = NULL; | |
1da177e4 | 7641 | |
51219358 MW |
7642 | for (;;) { |
7643 | /* | |
7644 | * Allocate a 'adv_sgblk_t' structure from the board free | |
7645 | * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK | |
7646 | * (15) scatter-gather elements. | |
7647 | */ | |
0ce53822 HR |
7648 | sgblkp = dma_pool_alloc(boardp->adv_sgblk_pool, GFP_ATOMIC, |
7649 | &sgblk_paddr); | |
7650 | if (!sgblkp) { | |
b352f923 | 7651 | ASC_DBG(1, "no free adv_sgblk_t\n"); |
51219358 | 7652 | ASC_STATS(scp->device->host, adv_build_nosg); |
1da177e4 | 7653 | |
51219358 MW |
7654 | /* |
7655 | * Allocation failed. Free 'adv_sgblk_t' structures | |
7656 | * already allocated for the request. | |
7657 | */ | |
7658 | while ((sgblkp = reqp->sgblkp) != NULL) { | |
7659 | /* Remove 'sgblkp' from the request list. */ | |
7660 | reqp->sgblkp = sgblkp->next_sgblkp; | |
0ce53822 HR |
7661 | sgblkp->next_sgblkp = NULL; |
7662 | dma_pool_free(boardp->adv_sgblk_pool, sgblkp, | |
7663 | sgblkp->sg_addr); | |
51219358 MW |
7664 | } |
7665 | return ASC_BUSY; | |
7666 | } | |
51219358 | 7667 | /* Complete 'adv_sgblk_t' board allocation. */ |
0ce53822 | 7668 | sgblkp->sg_addr = sgblk_paddr; |
51219358 | 7669 | sgblkp->next_sgblkp = NULL; |
0ce53822 | 7670 | sg_block = &sgblkp->sg_block; |
27c868c2 | 7671 | |
51219358 MW |
7672 | /* |
7673 | * Check if this is the first 'adv_sgblk_t' for the | |
7674 | * request. | |
7675 | */ | |
7676 | if (reqp->sgblkp == NULL) { | |
7677 | /* Request's first scatter-gather block. */ | |
7678 | reqp->sgblkp = sgblkp; | |
27c868c2 | 7679 | |
51219358 MW |
7680 | /* |
7681 | * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical | |
7682 | * address pointers. | |
7683 | */ | |
7684 | scsiqp->sg_list_ptr = sg_block; | |
0ce53822 | 7685 | scsiqp->sg_real_addr = cpu_to_le32(sgblk_paddr); |
51219358 MW |
7686 | } else { |
7687 | /* Request's second or later scatter-gather block. */ | |
0ce53822 | 7688 | prev_sgblkp->next_sgblkp = sgblkp; |
51219358 MW |
7689 | |
7690 | /* | |
7691 | * Point the previous ADV_SG_BLOCK structure to | |
7692 | * the newly allocated ADV_SG_BLOCK structure. | |
7693 | */ | |
0ce53822 | 7694 | prev_sg_block->sg_ptr = cpu_to_le32(sgblk_paddr); |
27c868c2 | 7695 | } |
1da177e4 | 7696 | |
51219358 MW |
7697 | for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) { |
7698 | sg_block->sg_list[i].sg_addr = | |
7699 | cpu_to_le32(sg_dma_address(slp)); | |
7700 | sg_block->sg_list[i].sg_count = | |
7701 | cpu_to_le32(sg_dma_len(slp)); | |
52c334e9 MW |
7702 | ASC_STATS_ADD(scp->device->host, xfer_sect, |
7703 | DIV_ROUND_UP(sg_dma_len(slp), 512)); | |
27c868c2 | 7704 | |
0ce53822 HR |
7705 | if (--sg_elem_cnt == 0) { |
7706 | /* | |
7707 | * Last ADV_SG_BLOCK and scatter-gather entry. | |
7708 | */ | |
51219358 | 7709 | sg_block->sg_cnt = i + 1; |
0ce53822 | 7710 | sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */ |
51219358 MW |
7711 | return ADV_SUCCESS; |
7712 | } | |
c0d0d81a | 7713 | slp = sg_next(slp); |
51219358 MW |
7714 | } |
7715 | sg_block->sg_cnt = NO_OF_SG_PER_BLOCK; | |
7716 | prev_sg_block = sg_block; | |
0ce53822 | 7717 | prev_sgblkp = sgblkp; |
27c868c2 | 7718 | } |
51219358 | 7719 | } |
1da177e4 | 7720 | |
51219358 MW |
7721 | /* |
7722 | * Build a request structure for the Adv Library (Wide Board). | |
7723 | * | |
7724 | * If an adv_req_t can not be allocated to issue the request, | |
7725 | * then return ASC_BUSY. If an error occurs, then return ASC_ERROR. | |
7726 | * | |
9fef6ba4 | 7727 | * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the |
51219358 MW |
7728 | * microcode for DMA addresses or math operations are byte swapped |
7729 | * to little-endian order. | |
7730 | */ | |
7731 | static int | |
d2411495 | 7732 | adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, |
4b47e464 | 7733 | adv_req_t **adv_reqpp) |
51219358 | 7734 | { |
9c17c62a | 7735 | u32 srb_tag = scp->request->tag; |
51219358 MW |
7736 | adv_req_t *reqp; |
7737 | ADV_SCSI_REQ_Q *scsiqp; | |
51219358 | 7738 | int ret; |
52c334e9 | 7739 | int use_sg; |
811ddc05 | 7740 | dma_addr_t sense_addr; |
1da177e4 | 7741 | |
27c868c2 | 7742 | /* |
51219358 MW |
7743 | * Allocate an adv_req_t structure from the board to execute |
7744 | * the command. | |
27c868c2 | 7745 | */ |
9c17c62a HR |
7746 | reqp = &boardp->adv_reqp[srb_tag]; |
7747 | if (reqp->cmndp && reqp->cmndp != scp ) { | |
b352f923 | 7748 | ASC_DBG(1, "no free adv_req_t\n"); |
51219358 MW |
7749 | ASC_STATS(scp->device->host, adv_build_noreq); |
7750 | return ASC_BUSY; | |
27c868c2 | 7751 | } |
1da177e4 | 7752 | |
4b47e464 HR |
7753 | reqp->req_addr = boardp->adv_reqp_addr + (srb_tag * sizeof(adv_req_t)); |
7754 | ||
7755 | scsiqp = &reqp->scsi_req_q; | |
27c868c2 MW |
7756 | |
7757 | /* | |
51219358 | 7758 | * Initialize the structure. |
27c868c2 | 7759 | */ |
51219358 | 7760 | scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0; |
27c868c2 MW |
7761 | |
7762 | /* | |
9c17c62a | 7763 | * Set the srb_tag to the command tag. |
27c868c2 | 7764 | */ |
9c17c62a | 7765 | scsiqp->srb_tag = srb_tag; |
27c868c2 MW |
7766 | |
7767 | /* | |
4b47e464 | 7768 | * Set 'host_scribble' to point to the adv_req_t structure. |
27c868c2 | 7769 | */ |
51219358 | 7770 | reqp->cmndp = scp; |
9c17c62a | 7771 | scp->host_scribble = (void *)reqp; |
27c868c2 MW |
7772 | |
7773 | /* | |
51219358 | 7774 | * Build the ADV_SCSI_REQ_Q request. |
27c868c2 | 7775 | */ |
51219358 MW |
7776 | |
7777 | /* Set CDB length and copy it to the request structure. */ | |
7778 | scsiqp->cdb_len = scp->cmd_len; | |
7779 | /* Copy first 12 CDB bytes to cdb[]. */ | |
811ddc05 | 7780 | memcpy(scsiqp->cdb, scp->cmnd, scp->cmd_len < 12 ? scp->cmd_len : 12); |
51219358 | 7781 | /* Copy last 4 CDB bytes, if present, to cdb16[]. */ |
811ddc05 HR |
7782 | if (scp->cmd_len > 12) { |
7783 | int cdb16_len = scp->cmd_len - 12; | |
7784 | ||
7785 | memcpy(scsiqp->cdb16, &scp->cmnd[12], cdb16_len); | |
27c868c2 | 7786 | } |
1da177e4 | 7787 | |
51219358 MW |
7788 | scsiqp->target_id = scp->device->id; |
7789 | scsiqp->target_lun = scp->device->lun; | |
7790 | ||
811ddc05 HR |
7791 | sense_addr = dma_map_single(boardp->dev, scp->sense_buffer, |
7792 | SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); | |
22070634 HR |
7793 | if (dma_mapping_error(boardp->dev, sense_addr)) { |
7794 | ASC_DBG(1, "failed to map sense buffer\n"); | |
7795 | ASC_STATS(scp->device->host, adv_build_noreq); | |
7796 | return ASC_BUSY; | |
7797 | } | |
811ddc05 | 7798 | scsiqp->sense_addr = cpu_to_le32(sense_addr); |
757b22f9 | 7799 | scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE; |
27c868c2 | 7800 | |
52c334e9 | 7801 | /* Build ADV_SCSI_REQ_Q */ |
51219358 | 7802 | |
52c334e9 | 7803 | use_sg = scsi_dma_map(scp); |
22070634 HR |
7804 | if (use_sg < 0) { |
7805 | ASC_DBG(1, "failed to map SG list\n"); | |
7806 | ASC_STATS(scp->device->host, adv_build_noreq); | |
7807 | return ASC_BUSY; | |
7808 | } else if (use_sg == 0) { | |
52c334e9 | 7809 | /* Zero-length transfer */ |
51219358 | 7810 | reqp->sgblkp = NULL; |
52c334e9 | 7811 | scsiqp->data_cnt = 0; |
52c334e9 MW |
7812 | |
7813 | scsiqp->data_addr = 0; | |
51219358 MW |
7814 | scsiqp->sg_list_ptr = NULL; |
7815 | scsiqp->sg_real_addr = 0; | |
51219358 | 7816 | } else { |
51219358 | 7817 | if (use_sg > ADV_MAX_SG_LIST) { |
9d0e96eb MW |
7818 | scmd_printk(KERN_ERR, scp, "use_sg %d > " |
7819 | "ADV_MAX_SG_LIST %d\n", use_sg, | |
51219358 | 7820 | scp->device->host->sg_tablesize); |
52c334e9 | 7821 | scsi_dma_unmap(scp); |
51219358 | 7822 | scp->result = HOST_BYTE(DID_ERROR); |
9c17c62a HR |
7823 | reqp->cmndp = NULL; |
7824 | scp->host_scribble = NULL; | |
51219358 MW |
7825 | |
7826 | return ASC_ERROR; | |
7827 | } | |
7828 | ||
52c334e9 MW |
7829 | scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp)); |
7830 | ||
4b47e464 | 7831 | ret = adv_get_sglist(boardp, reqp, scsiqp, scp, use_sg); |
51219358 | 7832 | if (ret != ADV_SUCCESS) { |
9c17c62a HR |
7833 | scsi_dma_unmap(scp); |
7834 | scp->result = HOST_BYTE(DID_ERROR); | |
7835 | reqp->cmndp = NULL; | |
7836 | scp->host_scribble = NULL; | |
51219358 MW |
7837 | |
7838 | return ret; | |
7839 | } | |
7840 | ||
52c334e9 | 7841 | ASC_STATS_ADD(scp->device->host, xfer_elem, use_sg); |
27c868c2 | 7842 | } |
1da177e4 | 7843 | |
52c334e9 MW |
7844 | ASC_STATS(scp->device->host, xfer_cnt); |
7845 | ||
51219358 MW |
7846 | ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); |
7847 | ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); | |
27c868c2 | 7848 | |
4b47e464 | 7849 | *adv_reqpp = reqp; |
27c868c2 | 7850 | |
51219358 MW |
7851 | return ASC_NOERROR; |
7852 | } | |
7853 | ||
7854 | static int AscSgListToQueue(int sg_list) | |
7855 | { | |
7856 | int n_sg_list_qs; | |
7857 | ||
7858 | n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q); | |
7859 | if (((sg_list - 1) % ASC_SG_LIST_PER_Q) != 0) | |
7860 | n_sg_list_qs++; | |
7861 | return n_sg_list_qs + 1; | |
7862 | } | |
7863 | ||
7864 | static uint | |
7865 | AscGetNumOfFreeQueue(ASC_DVC_VAR *asc_dvc, uchar target_ix, uchar n_qs) | |
7866 | { | |
7867 | uint cur_used_qs; | |
7868 | uint cur_free_qs; | |
7869 | ASC_SCSI_BIT_ID_TYPE target_id; | |
7870 | uchar tid_no; | |
7871 | ||
7872 | target_id = ASC_TIX_TO_TARGET_ID(target_ix); | |
7873 | tid_no = ASC_TIX_TO_TID(target_ix); | |
7874 | if ((asc_dvc->unit_not_ready & target_id) || | |
7875 | (asc_dvc->queue_full_or_busy & target_id)) { | |
7876 | return 0; | |
7877 | } | |
7878 | if (n_qs == 1) { | |
7879 | cur_used_qs = (uint) asc_dvc->cur_total_qng + | |
7880 | (uint) asc_dvc->last_q_shortage + (uint) ASC_MIN_FREE_Q; | |
7881 | } else { | |
7882 | cur_used_qs = (uint) asc_dvc->cur_total_qng + | |
7883 | (uint) ASC_MIN_FREE_Q; | |
7884 | } | |
7885 | if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) { | |
7886 | cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs; | |
7887 | if (asc_dvc->cur_dvc_qng[tid_no] >= | |
7888 | asc_dvc->max_dvc_qng[tid_no]) { | |
7889 | return 0; | |
7890 | } | |
7891 | return cur_free_qs; | |
7892 | } | |
7893 | if (n_qs > 1) { | |
7894 | if ((n_qs > asc_dvc->last_q_shortage) | |
7895 | && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q))) { | |
7896 | asc_dvc->last_q_shortage = n_qs; | |
7897 | } | |
7898 | } | |
7899 | return 0; | |
7900 | } | |
7901 | ||
7902 | static uchar AscAllocFreeQueue(PortAddr iop_base, uchar free_q_head) | |
7903 | { | |
7904 | ushort q_addr; | |
7905 | uchar next_qp; | |
7906 | uchar q_status; | |
7907 | ||
7908 | q_addr = ASC_QNO_TO_QADDR(free_q_head); | |
7909 | q_status = (uchar)AscReadLramByte(iop_base, | |
7910 | (ushort)(q_addr + | |
7911 | ASC_SCSIQ_B_STATUS)); | |
7912 | next_qp = AscReadLramByte(iop_base, (ushort)(q_addr + ASC_SCSIQ_B_FWD)); | |
7913 | if (((q_status & QS_READY) == 0) && (next_qp != ASC_QLINK_END)) | |
7914 | return next_qp; | |
7915 | return ASC_QLINK_END; | |
7916 | } | |
7917 | ||
7918 | static uchar | |
7919 | AscAllocMultipleFreeQueue(PortAddr iop_base, uchar free_q_head, uchar n_free_q) | |
7920 | { | |
7921 | uchar i; | |
27c868c2 | 7922 | |
51219358 MW |
7923 | for (i = 0; i < n_free_q; i++) { |
7924 | free_q_head = AscAllocFreeQueue(iop_base, free_q_head); | |
7925 | if (free_q_head == ASC_QLINK_END) | |
7926 | break; | |
7927 | } | |
7928 | return free_q_head; | |
7929 | } | |
27c868c2 | 7930 | |
51219358 MW |
7931 | /* |
7932 | * void | |
7933 | * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) | |
7934 | * | |
7935 | * Calling/Exit State: | |
7936 | * none | |
7937 | * | |
7938 | * Description: | |
7939 | * Output an ASC_SCSI_Q structure to the chip | |
7940 | */ | |
7941 | static void | |
7942 | DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) | |
7943 | { | |
7944 | int i; | |
7945 | ||
7946 | ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", outbuf, 2 * words); | |
7947 | AscSetChipLramAddr(iop_base, s_addr); | |
7948 | for (i = 0; i < 2 * words; i += 2) { | |
7949 | if (i == 4 || i == 20) { | |
7950 | continue; | |
7951 | } | |
7952 | outpw(iop_base + IOP_RAM_DATA, | |
7953 | ((ushort)outbuf[i + 1] << 8) | outbuf[i]); | |
27c868c2 | 7954 | } |
51219358 | 7955 | } |
1da177e4 | 7956 | |
51219358 MW |
7957 | static int AscPutReadyQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) |
7958 | { | |
7959 | ushort q_addr; | |
7960 | uchar tid_no; | |
7961 | uchar sdtr_data; | |
7962 | uchar syn_period_ix; | |
7963 | uchar syn_offset; | |
7964 | PortAddr iop_base; | |
7965 | ||
7966 | iop_base = asc_dvc->iop_base; | |
7967 | if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) && | |
7968 | ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) { | |
7969 | tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix); | |
7970 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); | |
7971 | syn_period_ix = | |
7972 | (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1); | |
7973 | syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET; | |
7974 | AscMsgOutSDTR(asc_dvc, | |
7975 | asc_dvc->sdtr_period_tbl[syn_period_ix], | |
7976 | syn_offset); | |
7977 | scsiq->q1.cntl |= QC_MSG_OUT; | |
7978 | } | |
7979 | q_addr = ASC_QNO_TO_QADDR(q_no); | |
7980 | if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) { | |
68d81f40 | 7981 | scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; |
27c868c2 | 7982 | } |
51219358 MW |
7983 | scsiq->q1.status = QS_FREE; |
7984 | AscMemWordCopyPtrToLram(iop_base, | |
7985 | q_addr + ASC_SCSIQ_CDB_BEG, | |
7986 | (uchar *)scsiq->cdbptr, scsiq->q2.cdb_len >> 1); | |
7987 | ||
7988 | DvcPutScsiQ(iop_base, | |
7989 | q_addr + ASC_SCSIQ_CPY_BEG, | |
7990 | (uchar *)&scsiq->q1.cntl, | |
7991 | ((sizeof(ASC_SCSIQ_1) + sizeof(ASC_SCSIQ_2)) / 2) - 1); | |
7992 | AscWriteLramWord(iop_base, | |
7993 | (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS), | |
7994 | (ushort)(((ushort)scsiq->q1. | |
7995 | q_no << 8) | (ushort)QS_READY)); | |
7996 | return 1; | |
7997 | } | |
7998 | ||
7999 | static int | |
8000 | AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) | |
8001 | { | |
8002 | int sta; | |
8003 | int i; | |
8004 | ASC_SG_HEAD *sg_head; | |
8005 | ASC_SG_LIST_Q scsi_sg_q; | |
95cfab6c HR |
8006 | __le32 saved_data_addr; |
8007 | __le32 saved_data_cnt; | |
51219358 MW |
8008 | PortAddr iop_base; |
8009 | ushort sg_list_dwords; | |
8010 | ushort sg_index; | |
8011 | ushort sg_entry_cnt; | |
8012 | ushort q_addr; | |
8013 | uchar next_qp; | |
1da177e4 | 8014 | |
51219358 MW |
8015 | iop_base = asc_dvc->iop_base; |
8016 | sg_head = scsiq->sg_head; | |
8017 | saved_data_addr = scsiq->q1.data_addr; | |
8018 | saved_data_cnt = scsiq->q1.data_cnt; | |
37f64608 HR |
8019 | scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr); |
8020 | scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes); | |
27c868c2 | 8021 | /* |
96aabb2a HR |
8022 | * Set sg_entry_cnt to be the number of SG elements that |
8023 | * will fit in the allocated SG queues. It is minus 1, because | |
8024 | * the first SG element is handled above. | |
27c868c2 | 8025 | */ |
96aabb2a | 8026 | sg_entry_cnt = sg_head->entry_cnt - 1; |
27c868c2 | 8027 | |
51219358 MW |
8028 | if (sg_entry_cnt != 0) { |
8029 | scsiq->q1.cntl |= QC_SG_HEAD; | |
8030 | q_addr = ASC_QNO_TO_QADDR(q_no); | |
8031 | sg_index = 1; | |
8032 | scsiq->q1.sg_queue_cnt = sg_head->queue_cnt; | |
8033 | scsi_sg_q.sg_head_qp = q_no; | |
8034 | scsi_sg_q.cntl = QCSG_SG_XFER_LIST; | |
8035 | for (i = 0; i < sg_head->queue_cnt; i++) { | |
8036 | scsi_sg_q.seq_no = i + 1; | |
8037 | if (sg_entry_cnt > ASC_SG_LIST_PER_Q) { | |
8038 | sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2); | |
8039 | sg_entry_cnt -= ASC_SG_LIST_PER_Q; | |
8040 | if (i == 0) { | |
8041 | scsi_sg_q.sg_list_cnt = | |
8042 | ASC_SG_LIST_PER_Q; | |
8043 | scsi_sg_q.sg_cur_list_cnt = | |
8044 | ASC_SG_LIST_PER_Q; | |
8045 | } else { | |
8046 | scsi_sg_q.sg_list_cnt = | |
8047 | ASC_SG_LIST_PER_Q - 1; | |
8048 | scsi_sg_q.sg_cur_list_cnt = | |
8049 | ASC_SG_LIST_PER_Q - 1; | |
8050 | } | |
8051 | } else { | |
96aabb2a | 8052 | scsi_sg_q.cntl |= QCSG_SG_XFER_END; |
51219358 MW |
8053 | sg_list_dwords = sg_entry_cnt << 1; |
8054 | if (i == 0) { | |
8055 | scsi_sg_q.sg_list_cnt = sg_entry_cnt; | |
8056 | scsi_sg_q.sg_cur_list_cnt = | |
8057 | sg_entry_cnt; | |
8058 | } else { | |
8059 | scsi_sg_q.sg_list_cnt = | |
8060 | sg_entry_cnt - 1; | |
8061 | scsi_sg_q.sg_cur_list_cnt = | |
8062 | sg_entry_cnt - 1; | |
8063 | } | |
8064 | sg_entry_cnt = 0; | |
8065 | } | |
8066 | next_qp = AscReadLramByte(iop_base, | |
8067 | (ushort)(q_addr + | |
8068 | ASC_SCSIQ_B_FWD)); | |
8069 | scsi_sg_q.q_no = next_qp; | |
8070 | q_addr = ASC_QNO_TO_QADDR(next_qp); | |
8071 | AscMemWordCopyPtrToLram(iop_base, | |
8072 | q_addr + ASC_SCSIQ_SGHD_CPY_BEG, | |
8073 | (uchar *)&scsi_sg_q, | |
8074 | sizeof(ASC_SG_LIST_Q) >> 1); | |
8075 | AscMemDWordCopyPtrToLram(iop_base, | |
8076 | q_addr + ASC_SGQ_LIST_BEG, | |
8077 | (uchar *)&sg_head-> | |
8078 | sg_list[sg_index], | |
8079 | sg_list_dwords); | |
8080 | sg_index += ASC_SG_LIST_PER_Q; | |
8081 | scsiq->next_sg_index = sg_index; | |
27c868c2 | 8082 | } |
51219358 MW |
8083 | } else { |
8084 | scsiq->q1.cntl &= ~QC_SG_HEAD; | |
27c868c2 | 8085 | } |
51219358 MW |
8086 | sta = AscPutReadyQueue(asc_dvc, scsiq, q_no); |
8087 | scsiq->q1.data_addr = saved_data_addr; | |
8088 | scsiq->q1.data_cnt = saved_data_cnt; | |
8089 | return (sta); | |
8090 | } | |
27c868c2 | 8091 | |
51219358 MW |
8092 | static int |
8093 | AscSendScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar n_q_required) | |
8094 | { | |
8095 | PortAddr iop_base; | |
8096 | uchar free_q_head; | |
8097 | uchar next_qp; | |
8098 | uchar tid_no; | |
8099 | uchar target_ix; | |
8100 | int sta; | |
27c868c2 | 8101 | |
51219358 MW |
8102 | iop_base = asc_dvc->iop_base; |
8103 | target_ix = scsiq->q2.target_ix; | |
8104 | tid_no = ASC_TIX_TO_TID(target_ix); | |
8105 | sta = 0; | |
8106 | free_q_head = (uchar)AscGetVarFreeQHead(iop_base); | |
8107 | if (n_q_required > 1) { | |
8108 | next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head, | |
8109 | (uchar)n_q_required); | |
8110 | if (next_qp != ASC_QLINK_END) { | |
8111 | asc_dvc->last_q_shortage = 0; | |
8112 | scsiq->sg_head->queue_cnt = n_q_required - 1; | |
8113 | scsiq->q1.q_no = free_q_head; | |
8114 | sta = AscPutReadySgListQueue(asc_dvc, scsiq, | |
8115 | free_q_head); | |
8116 | } | |
8117 | } else if (n_q_required == 1) { | |
8118 | next_qp = AscAllocFreeQueue(iop_base, free_q_head); | |
8119 | if (next_qp != ASC_QLINK_END) { | |
8120 | scsiq->q1.q_no = free_q_head; | |
8121 | sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head); | |
27c868c2 MW |
8122 | } |
8123 | } | |
51219358 MW |
8124 | if (sta == 1) { |
8125 | AscPutVarFreeQHead(iop_base, next_qp); | |
8126 | asc_dvc->cur_total_qng += n_q_required; | |
8127 | asc_dvc->cur_dvc_qng[tid_no]++; | |
27c868c2 | 8128 | } |
51219358 MW |
8129 | return sta; |
8130 | } | |
27c868c2 | 8131 | |
51219358 MW |
8132 | #define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16 |
8133 | static uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] = { | |
8134 | INQUIRY, | |
8135 | REQUEST_SENSE, | |
8136 | READ_CAPACITY, | |
8137 | READ_TOC, | |
8138 | MODE_SELECT, | |
8139 | MODE_SENSE, | |
8140 | MODE_SELECT_10, | |
8141 | MODE_SENSE_10, | |
8142 | 0xFF, | |
8143 | 0xFF, | |
8144 | 0xFF, | |
8145 | 0xFF, | |
8146 | 0xFF, | |
8147 | 0xFF, | |
8148 | 0xFF, | |
8149 | 0xFF | |
8150 | }; | |
27c868c2 | 8151 | |
51219358 MW |
8152 | static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq) |
8153 | { | |
8154 | PortAddr iop_base; | |
8155 | int sta; | |
8156 | int n_q_required; | |
ae26759e | 8157 | bool disable_syn_offset_one_fix; |
51219358 | 8158 | int i; |
95cfab6c | 8159 | u32 addr; |
51219358 MW |
8160 | ushort sg_entry_cnt = 0; |
8161 | ushort sg_entry_cnt_minus_one = 0; | |
8162 | uchar target_ix; | |
8163 | uchar tid_no; | |
8164 | uchar sdtr_data; | |
8165 | uchar extra_bytes; | |
8166 | uchar scsi_cmd; | |
8167 | uchar disable_cmd; | |
8168 | ASC_SG_HEAD *sg_head; | |
95cfab6c | 8169 | unsigned long data_cnt; |
27c868c2 | 8170 | |
51219358 MW |
8171 | iop_base = asc_dvc->iop_base; |
8172 | sg_head = scsiq->sg_head; | |
8173 | if (asc_dvc->err_code != 0) | |
f1138a84 | 8174 | return ASC_ERROR; |
51219358 MW |
8175 | scsiq->q1.q_no = 0; |
8176 | if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) { | |
8177 | scsiq->q1.extra_bytes = 0; | |
27c868c2 | 8178 | } |
51219358 MW |
8179 | sta = 0; |
8180 | target_ix = scsiq->q2.target_ix; | |
8181 | tid_no = ASC_TIX_TO_TID(target_ix); | |
8182 | n_q_required = 1; | |
8183 | if (scsiq->cdbptr[0] == REQUEST_SENSE) { | |
8184 | if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) { | |
8185 | asc_dvc->sdtr_done &= ~scsiq->q1.target_id; | |
8186 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); | |
8187 | AscMsgOutSDTR(asc_dvc, | |
8188 | asc_dvc-> | |
8189 | sdtr_period_tbl[(sdtr_data >> 4) & | |
8190 | (uchar)(asc_dvc-> | |
8191 | max_sdtr_index - | |
8192 | 1)], | |
8193 | (uchar)(sdtr_data & (uchar) | |
8194 | ASC_SYN_MAX_OFFSET)); | |
8195 | scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT); | |
8196 | } | |
8197 | } | |
8198 | if (asc_dvc->in_critical_cnt != 0) { | |
8199 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY); | |
f1138a84 | 8200 | return ASC_ERROR; |
51219358 MW |
8201 | } |
8202 | asc_dvc->in_critical_cnt++; | |
8203 | if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { | |
8204 | if ((sg_entry_cnt = sg_head->entry_cnt) == 0) { | |
8205 | asc_dvc->in_critical_cnt--; | |
f1138a84 | 8206 | return ASC_ERROR; |
51219358 | 8207 | } |
51219358 MW |
8208 | if (sg_entry_cnt > ASC_MAX_SG_LIST) { |
8209 | asc_dvc->in_critical_cnt--; | |
f1138a84 | 8210 | return ASC_ERROR; |
51219358 | 8211 | } |
51219358 | 8212 | if (sg_entry_cnt == 1) { |
37f64608 HR |
8213 | scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr); |
8214 | scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes); | |
51219358 MW |
8215 | scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE); |
8216 | } | |
8217 | sg_entry_cnt_minus_one = sg_entry_cnt - 1; | |
8218 | } | |
8219 | scsi_cmd = scsiq->cdbptr[0]; | |
ae26759e | 8220 | disable_syn_offset_one_fix = false; |
51219358 MW |
8221 | if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) && |
8222 | !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) { | |
8223 | if (scsiq->q1.cntl & QC_SG_HEAD) { | |
8224 | data_cnt = 0; | |
8225 | for (i = 0; i < sg_entry_cnt; i++) { | |
95cfab6c HR |
8226 | data_cnt += le32_to_cpu(sg_head->sg_list[i]. |
8227 | bytes); | |
51219358 MW |
8228 | } |
8229 | } else { | |
8230 | data_cnt = le32_to_cpu(scsiq->q1.data_cnt); | |
8231 | } | |
8232 | if (data_cnt != 0UL) { | |
8233 | if (data_cnt < 512UL) { | |
ae26759e | 8234 | disable_syn_offset_one_fix = true; |
51219358 MW |
8235 | } else { |
8236 | for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST; | |
8237 | i++) { | |
8238 | disable_cmd = | |
8239 | _syn_offset_one_disable_cmd[i]; | |
8240 | if (disable_cmd == 0xFF) { | |
8241 | break; | |
8242 | } | |
8243 | if (scsi_cmd == disable_cmd) { | |
8244 | disable_syn_offset_one_fix = | |
ae26759e | 8245 | true; |
51219358 MW |
8246 | break; |
8247 | } | |
8248 | } | |
8249 | } | |
8250 | } | |
8251 | } | |
8252 | if (disable_syn_offset_one_fix) { | |
68d81f40 | 8253 | scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; |
51219358 MW |
8254 | scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX | |
8255 | ASC_TAG_FLAG_DISABLE_DISCONNECT); | |
8256 | } else { | |
8257 | scsiq->q2.tag_code &= 0x27; | |
8258 | } | |
8259 | if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { | |
8260 | if (asc_dvc->bug_fix_cntl) { | |
8261 | if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { | |
8262 | if ((scsi_cmd == READ_6) || | |
8263 | (scsi_cmd == READ_10)) { | |
95cfab6c | 8264 | addr = le32_to_cpu(sg_head-> |
51219358 MW |
8265 | sg_list |
8266 | [sg_entry_cnt_minus_one]. | |
8267 | addr) + | |
95cfab6c | 8268 | le32_to_cpu(sg_head-> |
51219358 MW |
8269 | sg_list |
8270 | [sg_entry_cnt_minus_one]. | |
8271 | bytes); | |
8272 | extra_bytes = | |
8273 | (uchar)((ushort)addr & 0x0003); | |
8274 | if ((extra_bytes != 0) | |
8275 | && | |
8276 | ((scsiq->q2. | |
8277 | tag_code & | |
8278 | ASC_TAG_FLAG_EXTRA_BYTES) | |
8279 | == 0)) { | |
8280 | scsiq->q2.tag_code |= | |
8281 | ASC_TAG_FLAG_EXTRA_BYTES; | |
8282 | scsiq->q1.extra_bytes = | |
8283 | extra_bytes; | |
8284 | data_cnt = | |
8285 | le32_to_cpu(sg_head-> | |
8286 | sg_list | |
8287 | [sg_entry_cnt_minus_one]. | |
8288 | bytes); | |
95cfab6c | 8289 | data_cnt -= extra_bytes; |
51219358 MW |
8290 | sg_head-> |
8291 | sg_list | |
8292 | [sg_entry_cnt_minus_one]. | |
8293 | bytes = | |
8294 | cpu_to_le32(data_cnt); | |
8295 | } | |
8296 | } | |
8297 | } | |
8298 | } | |
8299 | sg_head->entry_to_copy = sg_head->entry_cnt; | |
51219358 MW |
8300 | n_q_required = AscSgListToQueue(sg_entry_cnt); |
8301 | if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >= | |
8302 | (uint) n_q_required) | |
8303 | || ((scsiq->q1.cntl & QC_URGENT) != 0)) { | |
8304 | if ((sta = | |
8305 | AscSendScsiQueue(asc_dvc, scsiq, | |
8306 | n_q_required)) == 1) { | |
8307 | asc_dvc->in_critical_cnt--; | |
8308 | return (sta); | |
27c868c2 | 8309 | } |
51219358 MW |
8310 | } |
8311 | } else { | |
8312 | if (asc_dvc->bug_fix_cntl) { | |
8313 | if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { | |
8314 | if ((scsi_cmd == READ_6) || | |
8315 | (scsi_cmd == READ_10)) { | |
8316 | addr = | |
8317 | le32_to_cpu(scsiq->q1.data_addr) + | |
8318 | le32_to_cpu(scsiq->q1.data_cnt); | |
8319 | extra_bytes = | |
8320 | (uchar)((ushort)addr & 0x0003); | |
8321 | if ((extra_bytes != 0) | |
8322 | && | |
8323 | ((scsiq->q2. | |
8324 | tag_code & | |
8325 | ASC_TAG_FLAG_EXTRA_BYTES) | |
8326 | == 0)) { | |
8327 | data_cnt = | |
8328 | le32_to_cpu(scsiq->q1. | |
8329 | data_cnt); | |
8330 | if (((ushort)data_cnt & 0x01FF) | |
8331 | == 0) { | |
8332 | scsiq->q2.tag_code |= | |
8333 | ASC_TAG_FLAG_EXTRA_BYTES; | |
95cfab6c | 8334 | data_cnt -= extra_bytes; |
51219358 MW |
8335 | scsiq->q1.data_cnt = |
8336 | cpu_to_le32 | |
8337 | (data_cnt); | |
8338 | scsiq->q1.extra_bytes = | |
8339 | extra_bytes; | |
8340 | } | |
8341 | } | |
8342 | } | |
8343 | } | |
8344 | } | |
8345 | n_q_required = 1; | |
8346 | if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) || | |
8347 | ((scsiq->q1.cntl & QC_URGENT) != 0)) { | |
8348 | if ((sta = AscSendScsiQueue(asc_dvc, scsiq, | |
8349 | n_q_required)) == 1) { | |
8350 | asc_dvc->in_critical_cnt--; | |
8351 | return (sta); | |
27c868c2 MW |
8352 | } |
8353 | } | |
8354 | } | |
51219358 MW |
8355 | asc_dvc->in_critical_cnt--; |
8356 | return (sta); | |
1da177e4 LT |
8357 | } |
8358 | ||
8359 | /* | |
51219358 | 8360 | * AdvExeScsiQueue() - Send a request to the RISC microcode program. |
1da177e4 | 8361 | * |
51219358 MW |
8362 | * Allocate a carrier structure, point the carrier to the ADV_SCSI_REQ_Q, |
8363 | * add the carrier to the ICQ (Initiator Command Queue), and tickle the | |
8364 | * RISC to notify it a new command is ready to be executed. | |
8365 | * | |
8366 | * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be | |
8367 | * set to SCSI_MAX_RETRY. | |
8368 | * | |
9fef6ba4 | 8369 | * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the microcode |
51219358 MW |
8370 | * for DMA addresses or math operations are byte swapped to little-endian |
8371 | * order. | |
8372 | * | |
8373 | * Return: | |
8374 | * ADV_SUCCESS(1) - The request was successfully queued. | |
8375 | * ADV_BUSY(0) - Resource unavailable; Retry again after pending | |
8376 | * request completes. | |
8377 | * ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure | |
8378 | * host IC error. | |
8379 | */ | |
4b47e464 | 8380 | static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, adv_req_t *reqp) |
51219358 MW |
8381 | { |
8382 | AdvPortAddr iop_base; | |
51219358 | 8383 | ADV_CARR_T *new_carrp; |
4b47e464 | 8384 | ADV_SCSI_REQ_Q *scsiq = &reqp->scsi_req_q; |
1da177e4 | 8385 | |
27c868c2 | 8386 | /* |
51219358 | 8387 | * The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID. |
27c868c2 | 8388 | */ |
51219358 MW |
8389 | if (scsiq->target_id > ADV_MAX_TID) { |
8390 | scsiq->host_status = QHSTA_M_INVALID_DEVICE; | |
8391 | scsiq->done_status = QD_WITH_ERROR; | |
27c868c2 MW |
8392 | return ADV_ERROR; |
8393 | } | |
1da177e4 | 8394 | |
51219358 | 8395 | iop_base = asc_dvc->iop_base; |
1da177e4 | 8396 | |
27c868c2 | 8397 | /* |
51219358 MW |
8398 | * Allocate a carrier ensuring at least one carrier always |
8399 | * remains on the freelist and initialize fields. | |
27c868c2 | 8400 | */ |
98b96a7d HR |
8401 | new_carrp = adv_get_next_carrier(asc_dvc); |
8402 | if (!new_carrp) { | |
8403 | ASC_DBG(1, "No free carriers\n"); | |
51219358 | 8404 | return ADV_BUSY; |
27c868c2 | 8405 | } |
1da177e4 | 8406 | |
98b96a7d | 8407 | asc_dvc->carr_pending_cnt++; |
27c868c2 | 8408 | |
51219358 | 8409 | /* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */ |
4b47e464 HR |
8410 | scsiq->scsiq_ptr = cpu_to_le32(scsiq->srb_tag); |
8411 | scsiq->scsiq_rptr = cpu_to_le32(reqp->req_addr); | |
51219358 | 8412 | |
98b96a7d | 8413 | scsiq->carr_va = asc_dvc->icq_sp->carr_va; |
51219358 | 8414 | scsiq->carr_pa = asc_dvc->icq_sp->carr_pa; |
1da177e4 | 8415 | |
27c868c2 | 8416 | /* |
51219358 MW |
8417 | * Use the current stopper to send the ADV_SCSI_REQ_Q command to |
8418 | * the microcode. The newly allocated stopper will become the new | |
8419 | * stopper. | |
27c868c2 | 8420 | */ |
4b47e464 | 8421 | asc_dvc->icq_sp->areq_vpa = scsiq->scsiq_rptr; |
1da177e4 | 8422 | |
27c868c2 | 8423 | /* |
51219358 MW |
8424 | * Set the 'next_vpa' pointer for the old stopper to be the |
8425 | * physical address of the new stopper. The RISC can only | |
8426 | * follow physical addresses. | |
27c868c2 | 8427 | */ |
51219358 | 8428 | asc_dvc->icq_sp->next_vpa = new_carrp->carr_pa; |
27c868c2 MW |
8429 | |
8430 | /* | |
51219358 | 8431 | * Set the host adapter stopper pointer to point to the new carrier. |
27c868c2 | 8432 | */ |
51219358 MW |
8433 | asc_dvc->icq_sp = new_carrp; |
8434 | ||
8435 | if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || | |
8436 | asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { | |
8437 | /* | |
8438 | * Tickle the RISC to tell it to read its Command Queue Head pointer. | |
8439 | */ | |
8440 | AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A); | |
8441 | if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { | |
8442 | /* | |
8443 | * Clear the tickle value. In the ASC-3550 the RISC flag | |
8444 | * command 'clr_tickle_a' does not work unless the host | |
8445 | * value is cleared. | |
8446 | */ | |
8447 | AdvWriteByteRegister(iop_base, IOPB_TICKLE, | |
8448 | ADV_TICKLE_NOP); | |
8449 | } | |
8450 | } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { | |
8451 | /* | |
8452 | * Notify the RISC a carrier is ready by writing the physical | |
8453 | * address of the new carrier stopper to the COMMA register. | |
8454 | */ | |
8455 | AdvWriteDWordRegister(iop_base, IOPDW_COMMA, | |
8456 | le32_to_cpu(new_carrp->carr_pa)); | |
27c868c2 | 8457 | } |
1da177e4 | 8458 | |
51219358 MW |
8459 | return ADV_SUCCESS; |
8460 | } | |
8461 | ||
8462 | /* | |
91ebc1fa | 8463 | * Execute a single 'struct scsi_cmnd'. |
51219358 MW |
8464 | */ |
8465 | static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp) | |
8466 | { | |
41d2493d | 8467 | int ret, err_code; |
d2411495 | 8468 | struct asc_board *boardp = shost_priv(scp->device->host); |
51219358 | 8469 | |
b352f923 | 8470 | ASC_DBG(1, "scp 0x%p\n", scp); |
27c868c2 | 8471 | |
51219358 | 8472 | if (ASC_NARROW_BOARD(boardp)) { |
41d2493d | 8473 | ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; |
05848b6e | 8474 | struct asc_scsi_q asc_scsi_q; |
27c868c2 | 8475 | |
05848b6e | 8476 | ret = asc_build_req(boardp, scp, &asc_scsi_q); |
22070634 | 8477 | if (ret != ASC_NOERROR) { |
51219358 | 8478 | ASC_STATS(scp->device->host, build_error); |
22070634 | 8479 | return ret; |
51219358 | 8480 | } |
1da177e4 | 8481 | |
41d2493d | 8482 | ret = AscExeScsiQueue(asc_dvc, &asc_scsi_q); |
05848b6e | 8483 | kfree(asc_scsi_q.sg_head); |
41d2493d | 8484 | err_code = asc_dvc->err_code; |
51219358 | 8485 | } else { |
41d2493d | 8486 | ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; |
4b47e464 | 8487 | adv_req_t *adv_reqp; |
27c868c2 | 8488 | |
4b47e464 | 8489 | switch (adv_build_req(boardp, scp, &adv_reqp)) { |
51219358 | 8490 | case ASC_NOERROR: |
b352f923 | 8491 | ASC_DBG(3, "adv_build_req ASC_NOERROR\n"); |
51219358 MW |
8492 | break; |
8493 | case ASC_BUSY: | |
b352f923 | 8494 | ASC_DBG(1, "adv_build_req ASC_BUSY\n"); |
51219358 MW |
8495 | /* |
8496 | * The asc_stats fields 'adv_build_noreq' and | |
8497 | * 'adv_build_nosg' count wide board busy conditions. | |
8498 | * They are updated in adv_build_req and | |
8499 | * adv_get_sglist, respectively. | |
8500 | */ | |
8501 | return ASC_BUSY; | |
8502 | case ASC_ERROR: | |
8503 | default: | |
b352f923 | 8504 | ASC_DBG(1, "adv_build_req ASC_ERROR\n"); |
51219358 MW |
8505 | ASC_STATS(scp->device->host, build_error); |
8506 | return ASC_ERROR; | |
8507 | } | |
8508 | ||
4b47e464 | 8509 | ret = AdvExeScsiQueue(adv_dvc, adv_reqp); |
41d2493d MW |
8510 | err_code = adv_dvc->err_code; |
8511 | } | |
8512 | ||
8513 | switch (ret) { | |
8514 | case ASC_NOERROR: | |
8515 | ASC_STATS(scp->device->host, exe_noerror); | |
8516 | /* | |
8517 | * Increment monotonically increasing per device | |
8518 | * successful request counter. Wrapping doesn't matter. | |
8519 | */ | |
8520 | boardp->reqcnt[scp->device->id]++; | |
b352f923 | 8521 | ASC_DBG(1, "ExeScsiQueue() ASC_NOERROR\n"); |
41d2493d MW |
8522 | break; |
8523 | case ASC_BUSY: | |
4b47e464 | 8524 | ASC_DBG(1, "ExeScsiQueue() ASC_BUSY\n"); |
41d2493d MW |
8525 | ASC_STATS(scp->device->host, exe_busy); |
8526 | break; | |
8527 | case ASC_ERROR: | |
9d0e96eb MW |
8528 | scmd_printk(KERN_ERR, scp, "ExeScsiQueue() ASC_ERROR, " |
8529 | "err_code 0x%x\n", err_code); | |
41d2493d MW |
8530 | ASC_STATS(scp->device->host, exe_error); |
8531 | scp->result = HOST_BYTE(DID_ERROR); | |
8532 | break; | |
8533 | default: | |
9d0e96eb MW |
8534 | scmd_printk(KERN_ERR, scp, "ExeScsiQueue() unknown, " |
8535 | "err_code 0x%x\n", err_code); | |
41d2493d MW |
8536 | ASC_STATS(scp->device->host, exe_unknown); |
8537 | scp->result = HOST_BYTE(DID_ERROR); | |
8538 | break; | |
27c868c2 | 8539 | } |
1da177e4 | 8540 | |
b352f923 | 8541 | ASC_DBG(1, "end\n"); |
51219358 MW |
8542 | return ret; |
8543 | } | |
27c868c2 | 8544 | |
51219358 MW |
8545 | /* |
8546 | * advansys_queuecommand() - interrupt-driven I/O entrypoint. | |
8547 | * | |
8548 | * This function always returns 0. Command return status is saved | |
8549 | * in the 'scp' result field. | |
8550 | */ | |
8551 | static int | |
f281233d | 8552 | advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) |
51219358 MW |
8553 | { |
8554 | struct Scsi_Host *shost = scp->device->host; | |
51219358 | 8555 | int asc_res, result = 0; |
27c868c2 | 8556 | |
51219358 MW |
8557 | ASC_STATS(shost, queuecommand); |
8558 | scp->scsi_done = done; | |
27c868c2 | 8559 | |
51219358 | 8560 | asc_res = asc_execute_scsi_cmnd(scp); |
51219358 MW |
8561 | |
8562 | switch (asc_res) { | |
8563 | case ASC_NOERROR: | |
8564 | break; | |
8565 | case ASC_BUSY: | |
8566 | result = SCSI_MLQUEUE_HOST_BUSY; | |
8567 | break; | |
8568 | case ASC_ERROR: | |
8569 | default: | |
8570 | asc_scsi_done(scp); | |
8571 | break; | |
8572 | } | |
8573 | ||
8574 | return result; | |
8575 | } | |
8576 | ||
f281233d JG |
8577 | static DEF_SCSI_QCMD(advansys_queuecommand) |
8578 | ||
6f039790 | 8579 | static ushort AscGetEisaChipCfg(PortAddr iop_base) |
51219358 MW |
8580 | { |
8581 | PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | | |
8582 | (PortAddr) (ASC_EISA_CFG_IOP_MASK); | |
8583 | return inpw(eisa_cfg_iop); | |
8584 | } | |
8585 | ||
8586 | /* | |
8587 | * Return the BIOS address of the adapter at the specified | |
8588 | * I/O port and with the specified bus type. | |
8589 | */ | |
6f039790 GKH |
8590 | static unsigned short AscGetChipBiosAddress(PortAddr iop_base, |
8591 | unsigned short bus_type) | |
51219358 MW |
8592 | { |
8593 | unsigned short cfg_lsw; | |
8594 | unsigned short bios_addr; | |
27c868c2 MW |
8595 | |
8596 | /* | |
51219358 MW |
8597 | * The PCI BIOS is re-located by the motherboard BIOS. Because |
8598 | * of this the driver can not determine where a PCI BIOS is | |
8599 | * loaded and executes. | |
27c868c2 | 8600 | */ |
51219358 MW |
8601 | if (bus_type & ASC_IS_PCI) |
8602 | return 0; | |
27c868c2 | 8603 | |
51219358 MW |
8604 | if ((bus_type & ASC_IS_EISA) != 0) { |
8605 | cfg_lsw = AscGetEisaChipCfg(iop_base); | |
8606 | cfg_lsw &= 0x000F; | |
8607 | bios_addr = ASC_BIOS_MIN_ADDR + cfg_lsw * ASC_BIOS_BANK_SIZE; | |
8608 | return bios_addr; | |
8609 | } | |
27c868c2 | 8610 | |
51219358 | 8611 | cfg_lsw = AscGetChipCfgLsw(iop_base); |
27c868c2 MW |
8612 | |
8613 | /* | |
51219358 | 8614 | * ISA PnP uses the top bit as the 32K BIOS flag |
27c868c2 | 8615 | */ |
51219358 MW |
8616 | if (bus_type == ASC_IS_ISAPNP) |
8617 | cfg_lsw &= 0x7FFF; | |
8618 | bios_addr = ASC_BIOS_MIN_ADDR + (cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE; | |
8619 | return bios_addr; | |
8620 | } | |
8621 | ||
6f039790 | 8622 | static uchar AscSetChipScsiID(PortAddr iop_base, uchar new_host_id) |
51219358 MW |
8623 | { |
8624 | ushort cfg_lsw; | |
8625 | ||
8626 | if (AscGetChipScsiID(iop_base) == new_host_id) { | |
8627 | return (new_host_id); | |
27c868c2 | 8628 | } |
51219358 MW |
8629 | cfg_lsw = AscGetChipCfgLsw(iop_base); |
8630 | cfg_lsw &= 0xF8FF; | |
8631 | cfg_lsw |= (ushort)((new_host_id & ASC_MAX_TID) << 8); | |
8632 | AscSetChipCfgLsw(iop_base, cfg_lsw); | |
8633 | return (AscGetChipScsiID(iop_base)); | |
8634 | } | |
27c868c2 | 8635 | |
6f039790 | 8636 | static unsigned char AscGetChipScsiCtrl(PortAddr iop_base) |
51219358 MW |
8637 | { |
8638 | unsigned char sc; | |
27c868c2 | 8639 | |
51219358 MW |
8640 | AscSetBank(iop_base, 1); |
8641 | sc = inp(iop_base + IOP_REG_SC); | |
8642 | AscSetBank(iop_base, 0); | |
8643 | return sc; | |
8644 | } | |
27c868c2 | 8645 | |
6f039790 GKH |
8646 | static unsigned char AscGetChipVersion(PortAddr iop_base, |
8647 | unsigned short bus_type) | |
51219358 MW |
8648 | { |
8649 | if (bus_type & ASC_IS_EISA) { | |
8650 | PortAddr eisa_iop; | |
8651 | unsigned char revision; | |
8652 | eisa_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | | |
8653 | (PortAddr) ASC_EISA_REV_IOP_MASK; | |
8654 | revision = inp(eisa_iop); | |
8655 | return ASC_CHIP_MIN_VER_EISA - 1 + revision; | |
27c868c2 | 8656 | } |
51219358 MW |
8657 | return AscGetChipVerNo(iop_base); |
8658 | } | |
27c868c2 | 8659 | |
51219358 | 8660 | #ifdef CONFIG_ISA |
6f039790 | 8661 | static void AscEnableIsaDma(uchar dma_channel) |
51219358 MW |
8662 | { |
8663 | if (dma_channel < 4) { | |
8664 | outp(0x000B, (ushort)(0xC0 | dma_channel)); | |
8665 | outp(0x000A, dma_channel); | |
8666 | } else if (dma_channel < 8) { | |
8667 | outp(0x00D6, (ushort)(0xC0 | (dma_channel - 4))); | |
8668 | outp(0x00D4, (ushort)(dma_channel - 4)); | |
8669 | } | |
51219358 MW |
8670 | } |
8671 | #endif /* CONFIG_ISA */ | |
8672 | ||
8673 | static int AscStopQueueExe(PortAddr iop_base) | |
8674 | { | |
8675 | int count = 0; | |
8676 | ||
8677 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) == 0) { | |
8678 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, | |
8679 | ASC_STOP_REQ_RISC_STOP); | |
8680 | do { | |
8681 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) & | |
8682 | ASC_STOP_ACK_RISC_STOP) { | |
8683 | return (1); | |
8684 | } | |
8685 | mdelay(100); | |
8686 | } while (count++ < 20); | |
8687 | } | |
8688 | return (0); | |
8689 | } | |
8690 | ||
95cfab6c | 8691 | static unsigned int AscGetMaxDmaCount(ushort bus_type) |
51219358 MW |
8692 | { |
8693 | if (bus_type & ASC_IS_ISA) | |
8694 | return ASC_MAX_ISA_DMA_COUNT; | |
8695 | else if (bus_type & (ASC_IS_EISA | ASC_IS_VL)) | |
8696 | return ASC_MAX_VL_DMA_COUNT; | |
8697 | return ASC_MAX_PCI_DMA_COUNT; | |
27c868c2 | 8698 | } |
1da177e4 | 8699 | |
51219358 | 8700 | #ifdef CONFIG_ISA |
6f039790 | 8701 | static ushort AscGetIsaDmaChannel(PortAddr iop_base) |
27c868c2 | 8702 | { |
51219358 | 8703 | ushort channel; |
1da177e4 | 8704 | |
51219358 MW |
8705 | channel = AscGetChipCfgLsw(iop_base) & 0x0003; |
8706 | if (channel == 0x03) | |
8707 | return (0); | |
8708 | else if (channel == 0x00) | |
8709 | return (7); | |
8710 | return (channel + 4); | |
8711 | } | |
1da177e4 | 8712 | |
6f039790 | 8713 | static ushort AscSetIsaDmaChannel(PortAddr iop_base, ushort dma_channel) |
51219358 MW |
8714 | { |
8715 | ushort cfg_lsw; | |
8716 | uchar value; | |
1da177e4 | 8717 | |
51219358 MW |
8718 | if ((dma_channel >= 5) && (dma_channel <= 7)) { |
8719 | if (dma_channel == 7) | |
8720 | value = 0x00; | |
8721 | else | |
8722 | value = dma_channel - 4; | |
8723 | cfg_lsw = AscGetChipCfgLsw(iop_base) & 0xFFFC; | |
8724 | cfg_lsw |= value; | |
8725 | AscSetChipCfgLsw(iop_base, cfg_lsw); | |
8726 | return (AscGetIsaDmaChannel(iop_base)); | |
8727 | } | |
8728 | return 0; | |
8729 | } | |
1da177e4 | 8730 | |
6f039790 | 8731 | static uchar AscGetIsaDmaSpeed(PortAddr iop_base) |
51219358 MW |
8732 | { |
8733 | uchar speed_value; | |
1da177e4 | 8734 | |
51219358 MW |
8735 | AscSetBank(iop_base, 1); |
8736 | speed_value = AscReadChipDmaSpeed(iop_base); | |
8737 | speed_value &= 0x07; | |
8738 | AscSetBank(iop_base, 0); | |
8739 | return speed_value; | |
8740 | } | |
1da177e4 | 8741 | |
6f039790 | 8742 | static uchar AscSetIsaDmaSpeed(PortAddr iop_base, uchar speed_value) |
51219358 MW |
8743 | { |
8744 | speed_value &= 0x07; | |
8745 | AscSetBank(iop_base, 1); | |
8746 | AscWriteChipDmaSpeed(iop_base, speed_value); | |
8747 | AscSetBank(iop_base, 0); | |
8748 | return AscGetIsaDmaSpeed(iop_base); | |
8749 | } | |
8750 | #endif /* CONFIG_ISA */ | |
1da177e4 | 8751 | |
f33134e5 | 8752 | static void AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
8753 | { |
8754 | int i; | |
8755 | PortAddr iop_base; | |
51219358 | 8756 | uchar chip_version; |
1da177e4 | 8757 | |
51219358 | 8758 | iop_base = asc_dvc->iop_base; |
51219358 MW |
8759 | asc_dvc->err_code = 0; |
8760 | if ((asc_dvc->bus_type & | |
8761 | (ASC_IS_ISA | ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) { | |
8762 | asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE; | |
27c868c2 | 8763 | } |
51219358 MW |
8764 | AscSetChipControl(iop_base, CC_HALT); |
8765 | AscSetChipStatus(iop_base, 0); | |
8766 | asc_dvc->bug_fix_cntl = 0; | |
8767 | asc_dvc->pci_fix_asyn_xfer = 0; | |
8768 | asc_dvc->pci_fix_asyn_xfer_always = 0; | |
421f91d2 | 8769 | /* asc_dvc->init_state initialized in AscInitGetConfig(). */ |
51219358 MW |
8770 | asc_dvc->sdtr_done = 0; |
8771 | asc_dvc->cur_total_qng = 0; | |
ae26759e | 8772 | asc_dvc->is_in_int = false; |
51219358 MW |
8773 | asc_dvc->in_critical_cnt = 0; |
8774 | asc_dvc->last_q_shortage = 0; | |
8775 | asc_dvc->use_tagged_qng = 0; | |
8776 | asc_dvc->no_scam = 0; | |
8777 | asc_dvc->unit_not_ready = 0; | |
8778 | asc_dvc->queue_full_or_busy = 0; | |
8779 | asc_dvc->redo_scam = 0; | |
8780 | asc_dvc->res2 = 0; | |
afbb68c3 | 8781 | asc_dvc->min_sdtr_index = 0; |
51219358 MW |
8782 | asc_dvc->cfg->can_tagged_qng = 0; |
8783 | asc_dvc->cfg->cmd_qng_enabled = 0; | |
8784 | asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL; | |
8785 | asc_dvc->init_sdtr = 0; | |
8786 | asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG; | |
8787 | asc_dvc->scsi_reset_wait = 3; | |
8788 | asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET; | |
8789 | asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type); | |
8790 | asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET; | |
8791 | asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET; | |
8792 | asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID; | |
51219358 MW |
8793 | chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type); |
8794 | asc_dvc->cfg->chip_version = chip_version; | |
afbb68c3 | 8795 | asc_dvc->sdtr_period_tbl = asc_syn_xfer_period; |
51219358 MW |
8796 | asc_dvc->max_sdtr_index = 7; |
8797 | if ((asc_dvc->bus_type & ASC_IS_PCI) && | |
8798 | (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150)) { | |
8799 | asc_dvc->bus_type = ASC_IS_PCI_ULTRA; | |
afbb68c3 | 8800 | asc_dvc->sdtr_period_tbl = asc_syn_ultra_xfer_period; |
51219358 MW |
8801 | asc_dvc->max_sdtr_index = 15; |
8802 | if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150) { | |
8803 | AscSetExtraControl(iop_base, | |
8804 | (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); | |
8805 | } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050) { | |
8806 | AscSetExtraControl(iop_base, | |
8807 | (SEC_ACTIVE_NEGATE | | |
8808 | SEC_ENABLE_FILTER)); | |
27c868c2 MW |
8809 | } |
8810 | } | |
51219358 MW |
8811 | if (asc_dvc->bus_type == ASC_IS_PCI) { |
8812 | AscSetExtraControl(iop_base, | |
8813 | (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); | |
8814 | } | |
1da177e4 | 8815 | |
51219358 MW |
8816 | asc_dvc->cfg->isa_dma_speed = ASC_DEF_ISA_DMA_SPEED; |
8817 | #ifdef CONFIG_ISA | |
8818 | if ((asc_dvc->bus_type & ASC_IS_ISA) != 0) { | |
8819 | if (chip_version >= ASC_CHIP_MIN_VER_ISA_PNP) { | |
8820 | AscSetChipIFC(iop_base, IFC_INIT_DEFAULT); | |
8821 | asc_dvc->bus_type = ASC_IS_ISAPNP; | |
27c868c2 | 8822 | } |
51219358 MW |
8823 | asc_dvc->cfg->isa_dma_channel = |
8824 | (uchar)AscGetIsaDmaChannel(iop_base); | |
27c868c2 | 8825 | } |
51219358 MW |
8826 | #endif /* CONFIG_ISA */ |
8827 | for (i = 0; i <= ASC_MAX_TID; i++) { | |
8828 | asc_dvc->cur_dvc_qng[i] = 0; | |
8829 | asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG; | |
8830 | asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *)0L; | |
8831 | asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *)0L; | |
8832 | asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG; | |
27c868c2 | 8833 | } |
51219358 | 8834 | } |
1da177e4 | 8835 | |
6f039790 | 8836 | static int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg) |
51219358 MW |
8837 | { |
8838 | int retry; | |
27c868c2 | 8839 | |
51219358 MW |
8840 | for (retry = 0; retry < ASC_EEP_MAX_RETRY; retry++) { |
8841 | unsigned char read_back; | |
8842 | AscSetChipEEPCmd(iop_base, cmd_reg); | |
8843 | mdelay(1); | |
8844 | read_back = AscGetChipEEPCmd(iop_base); | |
8845 | if (read_back == cmd_reg) | |
8846 | return 1; | |
27c868c2 | 8847 | } |
51219358 MW |
8848 | return 0; |
8849 | } | |
1da177e4 | 8850 | |
6f039790 | 8851 | static void AscWaitEEPRead(void) |
51219358 MW |
8852 | { |
8853 | mdelay(1); | |
27c868c2 | 8854 | } |
1da177e4 | 8855 | |
6f039790 | 8856 | static ushort AscReadEEPWord(PortAddr iop_base, uchar addr) |
27c868c2 | 8857 | { |
51219358 MW |
8858 | ushort read_wval; |
8859 | uchar cmd_reg; | |
27c868c2 | 8860 | |
51219358 MW |
8861 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); |
8862 | AscWaitEEPRead(); | |
8863 | cmd_reg = addr | ASC_EEP_CMD_READ; | |
8864 | AscWriteEEPCmdReg(iop_base, cmd_reg); | |
8865 | AscWaitEEPRead(); | |
8866 | read_wval = AscGetChipEEPData(iop_base); | |
8867 | AscWaitEEPRead(); | |
8868 | return read_wval; | |
8869 | } | |
27c868c2 | 8870 | |
6f039790 GKH |
8871 | static ushort AscGetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, |
8872 | ushort bus_type) | |
51219358 MW |
8873 | { |
8874 | ushort wval; | |
8875 | ushort sum; | |
8876 | ushort *wbuf; | |
8877 | int cfg_beg; | |
8878 | int cfg_end; | |
8879 | int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; | |
8880 | int s_addr; | |
27c868c2 | 8881 | |
51219358 MW |
8882 | wbuf = (ushort *)cfg_buf; |
8883 | sum = 0; | |
8884 | /* Read two config words; Byte-swapping done by AscReadEEPWord(). */ | |
8885 | for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { | |
8886 | *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); | |
8887 | sum += *wbuf; | |
8888 | } | |
8889 | if (bus_type & ASC_IS_VL) { | |
8890 | cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; | |
8891 | cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; | |
8892 | } else { | |
8893 | cfg_beg = ASC_EEP_DVC_CFG_BEG; | |
8894 | cfg_end = ASC_EEP_MAX_DVC_ADDR; | |
8895 | } | |
8896 | for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { | |
8897 | wval = AscReadEEPWord(iop_base, (uchar)s_addr); | |
8898 | if (s_addr <= uchar_end_in_config) { | |
8899 | /* | |
8900 | * Swap all char fields - must unswap bytes already swapped | |
8901 | * by AscReadEEPWord(). | |
8902 | */ | |
8903 | *wbuf = le16_to_cpu(wval); | |
8904 | } else { | |
8905 | /* Don't swap word field at the end - cntl field. */ | |
8906 | *wbuf = wval; | |
8907 | } | |
8908 | sum += wval; /* Checksum treats all EEPROM data as words. */ | |
8909 | } | |
27c868c2 | 8910 | /* |
51219358 MW |
8911 | * Read the checksum word which will be compared against 'sum' |
8912 | * by the caller. Word field already swapped. | |
27c868c2 | 8913 | */ |
51219358 MW |
8914 | *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); |
8915 | return sum; | |
8916 | } | |
1da177e4 | 8917 | |
6f039790 | 8918 | static int AscTestExternalLram(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
8919 | { |
8920 | PortAddr iop_base; | |
8921 | ushort q_addr; | |
8922 | ushort saved_word; | |
8923 | int sta; | |
1da177e4 | 8924 | |
51219358 MW |
8925 | iop_base = asc_dvc->iop_base; |
8926 | sta = 0; | |
8927 | q_addr = ASC_QNO_TO_QADDR(241); | |
8928 | saved_word = AscReadLramWord(iop_base, q_addr); | |
8929 | AscSetChipLramAddr(iop_base, q_addr); | |
8930 | AscSetChipLramData(iop_base, 0x55AA); | |
8931 | mdelay(10); | |
8932 | AscSetChipLramAddr(iop_base, q_addr); | |
8933 | if (AscGetChipLramData(iop_base) == 0x55AA) { | |
8934 | sta = 1; | |
8935 | AscWriteLramWord(iop_base, q_addr, saved_word); | |
8936 | } | |
8937 | return (sta); | |
8938 | } | |
1da177e4 | 8939 | |
6f039790 | 8940 | static void AscWaitEEPWrite(void) |
51219358 MW |
8941 | { |
8942 | mdelay(20); | |
51219358 | 8943 | } |
1da177e4 | 8944 | |
6f039790 | 8945 | static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg) |
51219358 MW |
8946 | { |
8947 | ushort read_back; | |
8948 | int retry; | |
1da177e4 | 8949 | |
51219358 | 8950 | retry = 0; |
ae26759e | 8951 | while (true) { |
51219358 MW |
8952 | AscSetChipEEPData(iop_base, data_reg); |
8953 | mdelay(1); | |
8954 | read_back = AscGetChipEEPData(iop_base); | |
8955 | if (read_back == data_reg) { | |
8956 | return (1); | |
8957 | } | |
8958 | if (retry++ > ASC_EEP_MAX_RETRY) { | |
8959 | return (0); | |
8960 | } | |
27c868c2 | 8961 | } |
51219358 | 8962 | } |
27c868c2 | 8963 | |
6f039790 | 8964 | static ushort AscWriteEEPWord(PortAddr iop_base, uchar addr, ushort word_val) |
51219358 MW |
8965 | { |
8966 | ushort read_wval; | |
8967 | ||
8968 | read_wval = AscReadEEPWord(iop_base, addr); | |
8969 | if (read_wval != word_val) { | |
8970 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE); | |
8971 | AscWaitEEPRead(); | |
8972 | AscWriteEEPDataReg(iop_base, word_val); | |
8973 | AscWaitEEPRead(); | |
8974 | AscWriteEEPCmdReg(iop_base, | |
8975 | (uchar)((uchar)ASC_EEP_CMD_WRITE | addr)); | |
8976 | AscWaitEEPWrite(); | |
8977 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); | |
8978 | AscWaitEEPRead(); | |
8979 | return (AscReadEEPWord(iop_base, addr)); | |
8980 | } | |
8981 | return (read_wval); | |
8982 | } | |
8983 | ||
6f039790 GKH |
8984 | static int AscSetEEPConfigOnce(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, |
8985 | ushort bus_type) | |
51219358 MW |
8986 | { |
8987 | int n_error; | |
8988 | ushort *wbuf; | |
8989 | ushort word; | |
8990 | ushort sum; | |
8991 | int s_addr; | |
8992 | int cfg_beg; | |
8993 | int cfg_end; | |
8994 | int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; | |
8995 | ||
8996 | wbuf = (ushort *)cfg_buf; | |
8997 | n_error = 0; | |
8998 | sum = 0; | |
8999 | /* Write two config words; AscWriteEEPWord() will swap bytes. */ | |
9000 | for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { | |
9001 | sum += *wbuf; | |
9002 | if (*wbuf != AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { | |
9003 | n_error++; | |
27c868c2 | 9004 | } |
51219358 MW |
9005 | } |
9006 | if (bus_type & ASC_IS_VL) { | |
9007 | cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; | |
9008 | cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; | |
9009 | } else { | |
9010 | cfg_beg = ASC_EEP_DVC_CFG_BEG; | |
9011 | cfg_end = ASC_EEP_MAX_DVC_ADDR; | |
9012 | } | |
9013 | for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { | |
9014 | if (s_addr <= uchar_end_in_config) { | |
9015 | /* | |
9016 | * This is a char field. Swap char fields before they are | |
9017 | * swapped again by AscWriteEEPWord(). | |
9018 | */ | |
9019 | word = cpu_to_le16(*wbuf); | |
9020 | if (word != | |
9021 | AscWriteEEPWord(iop_base, (uchar)s_addr, word)) { | |
9022 | n_error++; | |
9023 | } | |
9024 | } else { | |
9025 | /* Don't swap word field at the end - cntl field. */ | |
9026 | if (*wbuf != | |
9027 | AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { | |
9028 | n_error++; | |
9029 | } | |
27c868c2 | 9030 | } |
51219358 MW |
9031 | sum += *wbuf; /* Checksum calculated from word values. */ |
9032 | } | |
9033 | /* Write checksum word. It will be swapped by AscWriteEEPWord(). */ | |
9034 | *wbuf = sum; | |
9035 | if (sum != AscWriteEEPWord(iop_base, (uchar)s_addr, sum)) { | |
9036 | n_error++; | |
27c868c2 | 9037 | } |
1da177e4 | 9038 | |
51219358 MW |
9039 | /* Read EEPROM back again. */ |
9040 | wbuf = (ushort *)cfg_buf; | |
27c868c2 | 9041 | /* |
51219358 | 9042 | * Read two config words; Byte-swapping done by AscReadEEPWord(). |
27c868c2 | 9043 | */ |
51219358 MW |
9044 | for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { |
9045 | if (*wbuf != AscReadEEPWord(iop_base, (uchar)s_addr)) { | |
9046 | n_error++; | |
27c868c2 MW |
9047 | } |
9048 | } | |
51219358 MW |
9049 | if (bus_type & ASC_IS_VL) { |
9050 | cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; | |
9051 | cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; | |
9052 | } else { | |
9053 | cfg_beg = ASC_EEP_DVC_CFG_BEG; | |
9054 | cfg_end = ASC_EEP_MAX_DVC_ADDR; | |
9055 | } | |
9056 | for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { | |
9057 | if (s_addr <= uchar_end_in_config) { | |
9058 | /* | |
9059 | * Swap all char fields. Must unswap bytes already swapped | |
9060 | * by AscReadEEPWord(). | |
9061 | */ | |
9062 | word = | |
9063 | le16_to_cpu(AscReadEEPWord | |
9064 | (iop_base, (uchar)s_addr)); | |
27c868c2 | 9065 | } else { |
51219358 MW |
9066 | /* Don't swap word field at the end - cntl field. */ |
9067 | word = AscReadEEPWord(iop_base, (uchar)s_addr); | |
9068 | } | |
9069 | if (*wbuf != word) { | |
9070 | n_error++; | |
27c868c2 MW |
9071 | } |
9072 | } | |
51219358 MW |
9073 | /* Read checksum; Byte swapping not needed. */ |
9074 | if (AscReadEEPWord(iop_base, (uchar)s_addr) != sum) { | |
9075 | n_error++; | |
27c868c2 | 9076 | } |
51219358 MW |
9077 | return n_error; |
9078 | } | |
1da177e4 | 9079 | |
6f039790 GKH |
9080 | static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, |
9081 | ushort bus_type) | |
51219358 MW |
9082 | { |
9083 | int retry; | |
9084 | int n_error; | |
27c868c2 | 9085 | |
51219358 | 9086 | retry = 0; |
ae26759e | 9087 | while (true) { |
51219358 MW |
9088 | if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf, |
9089 | bus_type)) == 0) { | |
9090 | break; | |
9091 | } | |
9092 | if (++retry > ASC_EEP_MAX_RETRY) { | |
9093 | break; | |
9094 | } | |
9095 | } | |
9096 | return n_error; | |
9097 | } | |
27c868c2 | 9098 | |
f33134e5 | 9099 | static int AscInitFromEEP(ASC_DVC_VAR *asc_dvc) |
51219358 MW |
9100 | { |
9101 | ASCEEP_CONFIG eep_config_buf; | |
9102 | ASCEEP_CONFIG *eep_config; | |
9103 | PortAddr iop_base; | |
9104 | ushort chksum; | |
9105 | ushort warn_code; | |
9106 | ushort cfg_msw, cfg_lsw; | |
9107 | int i; | |
9108 | int write_eep = 0; | |
27c868c2 | 9109 | |
51219358 MW |
9110 | iop_base = asc_dvc->iop_base; |
9111 | warn_code = 0; | |
9112 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE); | |
9113 | AscStopQueueExe(iop_base); | |
ae26759e | 9114 | if ((AscStopChip(iop_base)) || |
51219358 MW |
9115 | (AscGetChipScsiCtrl(iop_base) != 0)) { |
9116 | asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE; | |
9117 | AscResetChipAndScsiBus(asc_dvc); | |
9118 | mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ | |
9119 | } | |
d647c783 | 9120 | if (!AscIsChipHalted(iop_base)) { |
51219358 MW |
9121 | asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; |
9122 | return (warn_code); | |
9123 | } | |
9124 | AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); | |
9125 | if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { | |
9126 | asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; | |
9127 | return (warn_code); | |
9128 | } | |
9129 | eep_config = (ASCEEP_CONFIG *)&eep_config_buf; | |
9130 | cfg_msw = AscGetChipCfgMsw(iop_base); | |
9131 | cfg_lsw = AscGetChipCfgLsw(iop_base); | |
9132 | if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { | |
9133 | cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; | |
9134 | warn_code |= ASC_WARN_CFG_MSW_RECOVER; | |
9135 | AscSetChipCfgMsw(iop_base, cfg_msw); | |
9136 | } | |
9137 | chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type); | |
b352f923 | 9138 | ASC_DBG(1, "chksum 0x%x\n", chksum); |
51219358 MW |
9139 | if (chksum == 0) { |
9140 | chksum = 0xaa55; | |
9141 | } | |
9142 | if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { | |
9143 | warn_code |= ASC_WARN_AUTO_CONFIG; | |
9144 | if (asc_dvc->cfg->chip_version == 3) { | |
9145 | if (eep_config->cfg_lsw != cfg_lsw) { | |
9146 | warn_code |= ASC_WARN_EEPROM_RECOVER; | |
9147 | eep_config->cfg_lsw = | |
9148 | AscGetChipCfgLsw(iop_base); | |
9149 | } | |
9150 | if (eep_config->cfg_msw != cfg_msw) { | |
9151 | warn_code |= ASC_WARN_EEPROM_RECOVER; | |
9152 | eep_config->cfg_msw = | |
9153 | AscGetChipCfgMsw(iop_base); | |
9154 | } | |
9155 | } | |
9156 | } | |
9157 | eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; | |
9158 | eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON; | |
b352f923 | 9159 | ASC_DBG(1, "eep_config->chksum 0x%x\n", eep_config->chksum); |
51219358 MW |
9160 | if (chksum != eep_config->chksum) { |
9161 | if (AscGetChipVersion(iop_base, asc_dvc->bus_type) == | |
9162 | ASC_CHIP_VER_PCI_ULTRA_3050) { | |
b352f923 | 9163 | ASC_DBG(1, "chksum error ignored; EEPROM-less board\n"); |
51219358 MW |
9164 | eep_config->init_sdtr = 0xFF; |
9165 | eep_config->disc_enable = 0xFF; | |
9166 | eep_config->start_motor = 0xFF; | |
9167 | eep_config->use_cmd_qng = 0; | |
9168 | eep_config->max_total_qng = 0xF0; | |
9169 | eep_config->max_tag_qng = 0x20; | |
9170 | eep_config->cntl = 0xBFFF; | |
9171 | ASC_EEP_SET_CHIP_ID(eep_config, 7); | |
9172 | eep_config->no_scam = 0; | |
9173 | eep_config->adapter_info[0] = 0; | |
9174 | eep_config->adapter_info[1] = 0; | |
9175 | eep_config->adapter_info[2] = 0; | |
9176 | eep_config->adapter_info[3] = 0; | |
9177 | eep_config->adapter_info[4] = 0; | |
9178 | /* Indicate EEPROM-less board. */ | |
9179 | eep_config->adapter_info[5] = 0xBB; | |
27c868c2 | 9180 | } else { |
51219358 MW |
9181 | ASC_PRINT |
9182 | ("AscInitFromEEP: EEPROM checksum error; Will try to re-write EEPROM.\n"); | |
9183 | write_eep = 1; | |
9184 | warn_code |= ASC_WARN_EEPROM_CHKSUM; | |
9185 | } | |
9186 | } | |
9187 | asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr; | |
9188 | asc_dvc->cfg->disc_enable = eep_config->disc_enable; | |
9189 | asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng; | |
9190 | asc_dvc->cfg->isa_dma_speed = ASC_EEP_GET_DMA_SPD(eep_config); | |
9191 | asc_dvc->start_motor = eep_config->start_motor; | |
9192 | asc_dvc->dvc_cntl = eep_config->cntl; | |
9193 | asc_dvc->no_scam = eep_config->no_scam; | |
9194 | asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0]; | |
9195 | asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1]; | |
9196 | asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2]; | |
9197 | asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3]; | |
9198 | asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4]; | |
9199 | asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5]; | |
9200 | if (!AscTestExternalLram(asc_dvc)) { | |
9201 | if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == | |
9202 | ASC_IS_PCI_ULTRA)) { | |
9203 | eep_config->max_total_qng = | |
9204 | ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; | |
9205 | eep_config->max_tag_qng = | |
9206 | ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG; | |
9207 | } else { | |
9208 | eep_config->cfg_msw |= 0x0800; | |
9209 | cfg_msw |= 0x0800; | |
9210 | AscSetChipCfgMsw(iop_base, cfg_msw); | |
9211 | eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG; | |
9212 | eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG; | |
27c868c2 | 9213 | } |
51219358 MW |
9214 | } else { |
9215 | } | |
9216 | if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG) { | |
9217 | eep_config->max_total_qng = ASC_MIN_TOTAL_QNG; | |
9218 | } | |
9219 | if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG) { | |
9220 | eep_config->max_total_qng = ASC_MAX_TOTAL_QNG; | |
9221 | } | |
9222 | if (eep_config->max_tag_qng > eep_config->max_total_qng) { | |
9223 | eep_config->max_tag_qng = eep_config->max_total_qng; | |
9224 | } | |
9225 | if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC) { | |
9226 | eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC; | |
9227 | } | |
9228 | asc_dvc->max_total_qng = eep_config->max_total_qng; | |
9229 | if ((eep_config->use_cmd_qng & eep_config->disc_enable) != | |
9230 | eep_config->use_cmd_qng) { | |
9231 | eep_config->disc_enable = eep_config->use_cmd_qng; | |
9232 | warn_code |= ASC_WARN_CMD_QNG_CONFLICT; | |
9233 | } | |
51219358 MW |
9234 | ASC_EEP_SET_CHIP_ID(eep_config, |
9235 | ASC_EEP_GET_CHIP_ID(eep_config) & ASC_MAX_TID); | |
9236 | asc_dvc->cfg->chip_scsi_id = ASC_EEP_GET_CHIP_ID(eep_config); | |
9237 | if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) && | |
9238 | !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA)) { | |
afbb68c3 | 9239 | asc_dvc->min_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX; |
27c868c2 | 9240 | } |
1da177e4 | 9241 | |
51219358 MW |
9242 | for (i = 0; i <= ASC_MAX_TID; i++) { |
9243 | asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i]; | |
9244 | asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng; | |
9245 | asc_dvc->cfg->sdtr_period_offset[i] = | |
9246 | (uchar)(ASC_DEF_SDTR_OFFSET | | |
afbb68c3 | 9247 | (asc_dvc->min_sdtr_index << 4)); |
51219358 MW |
9248 | } |
9249 | eep_config->cfg_msw = AscGetChipCfgMsw(iop_base); | |
9250 | if (write_eep) { | |
9251 | if ((i = AscSetEEPConfig(iop_base, eep_config, | |
9252 | asc_dvc->bus_type)) != 0) { | |
9253 | ASC_PRINT1 | |
9254 | ("AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", | |
9255 | i); | |
27c868c2 | 9256 | } else { |
51219358 MW |
9257 | ASC_PRINT |
9258 | ("AscInitFromEEP: Successfully re-wrote EEPROM.\n"); | |
27c868c2 MW |
9259 | } |
9260 | } | |
51219358 | 9261 | return (warn_code); |
1da177e4 LT |
9262 | } |
9263 | ||
6f039790 | 9264 | static int AscInitGetConfig(struct Scsi_Host *shost) |
1da177e4 | 9265 | { |
9d0e96eb MW |
9266 | struct asc_board *board = shost_priv(shost); |
9267 | ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; | |
51219358 | 9268 | unsigned short warn_code = 0; |
27c868c2 | 9269 | |
51219358 MW |
9270 | asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG; |
9271 | if (asc_dvc->err_code != 0) | |
9272 | return asc_dvc->err_code; | |
27c868c2 | 9273 | |
51219358 | 9274 | if (AscFindSignature(asc_dvc->iop_base)) { |
f33134e5 HR |
9275 | AscInitAscDvcVar(asc_dvc); |
9276 | warn_code = AscInitFromEEP(asc_dvc); | |
51219358 MW |
9277 | asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG; |
9278 | if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT) | |
9279 | asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT; | |
9280 | } else { | |
9281 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; | |
9282 | } | |
27c868c2 | 9283 | |
51219358 MW |
9284 | switch (warn_code) { |
9285 | case 0: /* No error */ | |
9286 | break; | |
9287 | case ASC_WARN_IO_PORT_ROTATE: | |
9d0e96eb MW |
9288 | shost_printk(KERN_WARNING, shost, "I/O port address " |
9289 | "modified\n"); | |
51219358 MW |
9290 | break; |
9291 | case ASC_WARN_AUTO_CONFIG: | |
9d0e96eb MW |
9292 | shost_printk(KERN_WARNING, shost, "I/O port increment switch " |
9293 | "enabled\n"); | |
51219358 MW |
9294 | break; |
9295 | case ASC_WARN_EEPROM_CHKSUM: | |
9d0e96eb | 9296 | shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); |
51219358 MW |
9297 | break; |
9298 | case ASC_WARN_IRQ_MODIFIED: | |
9d0e96eb | 9299 | shost_printk(KERN_WARNING, shost, "IRQ modified\n"); |
51219358 MW |
9300 | break; |
9301 | case ASC_WARN_CMD_QNG_CONFLICT: | |
9d0e96eb MW |
9302 | shost_printk(KERN_WARNING, shost, "tag queuing enabled w/o " |
9303 | "disconnects\n"); | |
51219358 MW |
9304 | break; |
9305 | default: | |
9d0e96eb MW |
9306 | shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", |
9307 | warn_code); | |
51219358 MW |
9308 | break; |
9309 | } | |
1da177e4 | 9310 | |
9d0e96eb MW |
9311 | if (asc_dvc->err_code != 0) |
9312 | shost_printk(KERN_ERR, shost, "error 0x%x at init_state " | |
9313 | "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); | |
27c868c2 | 9314 | |
51219358 MW |
9315 | return asc_dvc->err_code; |
9316 | } | |
1da177e4 | 9317 | |
6f039790 | 9318 | static int AscInitSetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) |
51219358 | 9319 | { |
9d0e96eb MW |
9320 | struct asc_board *board = shost_priv(shost); |
9321 | ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; | |
51219358 MW |
9322 | PortAddr iop_base = asc_dvc->iop_base; |
9323 | unsigned short cfg_msw; | |
9324 | unsigned short warn_code = 0; | |
1da177e4 | 9325 | |
51219358 MW |
9326 | asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG; |
9327 | if (asc_dvc->err_code != 0) | |
9328 | return asc_dvc->err_code; | |
9329 | if (!AscFindSignature(asc_dvc->iop_base)) { | |
9330 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; | |
9331 | return asc_dvc->err_code; | |
27c868c2 | 9332 | } |
1da177e4 | 9333 | |
51219358 MW |
9334 | cfg_msw = AscGetChipCfgMsw(iop_base); |
9335 | if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { | |
9336 | cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; | |
9337 | warn_code |= ASC_WARN_CFG_MSW_RECOVER; | |
9338 | AscSetChipCfgMsw(iop_base, cfg_msw); | |
9339 | } | |
9340 | if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) != | |
9341 | asc_dvc->cfg->cmd_qng_enabled) { | |
9342 | asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled; | |
9343 | warn_code |= ASC_WARN_CMD_QNG_CONFLICT; | |
9344 | } | |
9345 | if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { | |
9346 | warn_code |= ASC_WARN_AUTO_CONFIG; | |
9347 | } | |
51219358 MW |
9348 | #ifdef CONFIG_PCI |
9349 | if (asc_dvc->bus_type & ASC_IS_PCI) { | |
9350 | cfg_msw &= 0xFFC0; | |
9351 | AscSetChipCfgMsw(iop_base, cfg_msw); | |
9352 | if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) { | |
27c868c2 | 9353 | } else { |
51219358 MW |
9354 | if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || |
9355 | (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { | |
9356 | asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB; | |
9357 | asc_dvc->bug_fix_cntl |= | |
9358 | ASC_BUG_FIX_ASYN_USE_SYN; | |
9359 | } | |
27c868c2 | 9360 | } |
51219358 MW |
9361 | } else |
9362 | #endif /* CONFIG_PCI */ | |
9363 | if (asc_dvc->bus_type == ASC_IS_ISAPNP) { | |
9364 | if (AscGetChipVersion(iop_base, asc_dvc->bus_type) | |
9365 | == ASC_CHIP_VER_ASYN_BUG) { | |
9366 | asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN; | |
27c868c2 MW |
9367 | } |
9368 | } | |
51219358 MW |
9369 | if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) != |
9370 | asc_dvc->cfg->chip_scsi_id) { | |
9371 | asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID; | |
9372 | } | |
9373 | #ifdef CONFIG_ISA | |
9374 | if (asc_dvc->bus_type & ASC_IS_ISA) { | |
9375 | AscSetIsaDmaChannel(iop_base, asc_dvc->cfg->isa_dma_channel); | |
9376 | AscSetIsaDmaSpeed(iop_base, asc_dvc->cfg->isa_dma_speed); | |
9377 | } | |
9378 | #endif /* CONFIG_ISA */ | |
1da177e4 | 9379 | |
51219358 MW |
9380 | asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG; |
9381 | ||
9382 | switch (warn_code) { | |
9383 | case 0: /* No error. */ | |
9384 | break; | |
9385 | case ASC_WARN_IO_PORT_ROTATE: | |
9d0e96eb MW |
9386 | shost_printk(KERN_WARNING, shost, "I/O port address " |
9387 | "modified\n"); | |
51219358 MW |
9388 | break; |
9389 | case ASC_WARN_AUTO_CONFIG: | |
9d0e96eb MW |
9390 | shost_printk(KERN_WARNING, shost, "I/O port increment switch " |
9391 | "enabled\n"); | |
51219358 MW |
9392 | break; |
9393 | case ASC_WARN_EEPROM_CHKSUM: | |
9d0e96eb | 9394 | shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); |
51219358 MW |
9395 | break; |
9396 | case ASC_WARN_IRQ_MODIFIED: | |
9d0e96eb | 9397 | shost_printk(KERN_WARNING, shost, "IRQ modified\n"); |
51219358 MW |
9398 | break; |
9399 | case ASC_WARN_CMD_QNG_CONFLICT: | |
9d0e96eb MW |
9400 | shost_printk(KERN_WARNING, shost, "tag queuing w/o " |
9401 | "disconnects\n"); | |
51219358 MW |
9402 | break; |
9403 | default: | |
9d0e96eb MW |
9404 | shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", |
9405 | warn_code); | |
51219358 | 9406 | break; |
27c868c2 | 9407 | } |
1da177e4 | 9408 | |
9d0e96eb MW |
9409 | if (asc_dvc->err_code != 0) |
9410 | shost_printk(KERN_ERR, shost, "error 0x%x at init_state " | |
9411 | "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); | |
27c868c2 | 9412 | |
51219358 MW |
9413 | return asc_dvc->err_code; |
9414 | } | |
27c868c2 | 9415 | |
51219358 MW |
9416 | /* |
9417 | * EEPROM Configuration. | |
9418 | * | |
9419 | * All drivers should use this structure to set the default EEPROM | |
9420 | * configuration. The BIOS now uses this structure when it is built. | |
9421 | * Additional structure information can be found in a_condor.h where | |
9422 | * the structure is defined. | |
9423 | * | |
9424 | * The *_Field_IsChar structs are needed to correct for endianness. | |
9425 | * These values are read from the board 16 bits at a time directly | |
9426 | * into the structs. Because some fields are char, the values will be | |
9427 | * in the wrong order. The *_Field_IsChar tells when to flip the | |
9428 | * bytes. Data read and written to PCI memory is automatically swapped | |
9429 | * on big-endian platforms so char fields read as words are actually being | |
9430 | * unswapped on big-endian platforms. | |
9431 | */ | |
8810eac8 | 9432 | #ifdef CONFIG_PCI |
6f039790 | 9433 | static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config = { |
51219358 MW |
9434 | ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */ |
9435 | 0x0000, /* cfg_msw */ | |
9436 | 0xFFFF, /* disc_enable */ | |
9437 | 0xFFFF, /* wdtr_able */ | |
9438 | 0xFFFF, /* sdtr_able */ | |
9439 | 0xFFFF, /* start_motor */ | |
9440 | 0xFFFF, /* tagqng_able */ | |
9441 | 0xFFFF, /* bios_scan */ | |
9442 | 0, /* scam_tolerant */ | |
9443 | 7, /* adapter_scsi_id */ | |
9444 | 0, /* bios_boot_delay */ | |
9445 | 3, /* scsi_reset_delay */ | |
9446 | 0, /* bios_id_lun */ | |
9447 | 0, /* termination */ | |
9448 | 0, /* reserved1 */ | |
9449 | 0xFFE7, /* bios_ctrl */ | |
9450 | 0xFFFF, /* ultra_able */ | |
9451 | 0, /* reserved2 */ | |
9452 | ASC_DEF_MAX_HOST_QNG, /* max_host_qng */ | |
9453 | ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ | |
9454 | 0, /* dvc_cntl */ | |
9455 | 0, /* bug_fix */ | |
9456 | 0, /* serial_number_word1 */ | |
9457 | 0, /* serial_number_word2 */ | |
9458 | 0, /* serial_number_word3 */ | |
9459 | 0, /* check_sum */ | |
9460 | {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} | |
9461 | , /* oem_name[16] */ | |
9462 | 0, /* dvc_err_code */ | |
9463 | 0, /* adv_err_code */ | |
9464 | 0, /* adv_err_addr */ | |
9465 | 0, /* saved_dvc_err_code */ | |
9466 | 0, /* saved_adv_err_code */ | |
9467 | 0, /* saved_adv_err_addr */ | |
9468 | 0 /* num_of_err */ | |
9469 | }; | |
27c868c2 | 9470 | |
6f039790 | 9471 | static ADVEEP_3550_CONFIG ADVEEP_3550_Config_Field_IsChar = { |
51219358 MW |
9472 | 0, /* cfg_lsw */ |
9473 | 0, /* cfg_msw */ | |
9474 | 0, /* -disc_enable */ | |
9475 | 0, /* wdtr_able */ | |
9476 | 0, /* sdtr_able */ | |
9477 | 0, /* start_motor */ | |
9478 | 0, /* tagqng_able */ | |
9479 | 0, /* bios_scan */ | |
9480 | 0, /* scam_tolerant */ | |
9481 | 1, /* adapter_scsi_id */ | |
9482 | 1, /* bios_boot_delay */ | |
9483 | 1, /* scsi_reset_delay */ | |
9484 | 1, /* bios_id_lun */ | |
9485 | 1, /* termination */ | |
9486 | 1, /* reserved1 */ | |
9487 | 0, /* bios_ctrl */ | |
9488 | 0, /* ultra_able */ | |
9489 | 0, /* reserved2 */ | |
9490 | 1, /* max_host_qng */ | |
9491 | 1, /* max_dvc_qng */ | |
9492 | 0, /* dvc_cntl */ | |
9493 | 0, /* bug_fix */ | |
9494 | 0, /* serial_number_word1 */ | |
9495 | 0, /* serial_number_word2 */ | |
9496 | 0, /* serial_number_word3 */ | |
9497 | 0, /* check_sum */ | |
9498 | {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} | |
9499 | , /* oem_name[16] */ | |
9500 | 0, /* dvc_err_code */ | |
9501 | 0, /* adv_err_code */ | |
9502 | 0, /* adv_err_addr */ | |
9503 | 0, /* saved_dvc_err_code */ | |
9504 | 0, /* saved_adv_err_code */ | |
9505 | 0, /* saved_adv_err_addr */ | |
9506 | 0 /* num_of_err */ | |
9507 | }; | |
1da177e4 | 9508 | |
6f039790 | 9509 | static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config = { |
51219358 MW |
9510 | ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ |
9511 | 0x0000, /* 01 cfg_msw */ | |
9512 | 0xFFFF, /* 02 disc_enable */ | |
9513 | 0xFFFF, /* 03 wdtr_able */ | |
9514 | 0x4444, /* 04 sdtr_speed1 */ | |
9515 | 0xFFFF, /* 05 start_motor */ | |
9516 | 0xFFFF, /* 06 tagqng_able */ | |
9517 | 0xFFFF, /* 07 bios_scan */ | |
9518 | 0, /* 08 scam_tolerant */ | |
9519 | 7, /* 09 adapter_scsi_id */ | |
9520 | 0, /* bios_boot_delay */ | |
9521 | 3, /* 10 scsi_reset_delay */ | |
9522 | 0, /* bios_id_lun */ | |
9523 | 0, /* 11 termination_se */ | |
9524 | 0, /* termination_lvd */ | |
9525 | 0xFFE7, /* 12 bios_ctrl */ | |
9526 | 0x4444, /* 13 sdtr_speed2 */ | |
9527 | 0x4444, /* 14 sdtr_speed3 */ | |
9528 | ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ | |
9529 | ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ | |
9530 | 0, /* 16 dvc_cntl */ | |
9531 | 0x4444, /* 17 sdtr_speed4 */ | |
9532 | 0, /* 18 serial_number_word1 */ | |
9533 | 0, /* 19 serial_number_word2 */ | |
9534 | 0, /* 20 serial_number_word3 */ | |
9535 | 0, /* 21 check_sum */ | |
9536 | {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} | |
9537 | , /* 22-29 oem_name[16] */ | |
9538 | 0, /* 30 dvc_err_code */ | |
9539 | 0, /* 31 adv_err_code */ | |
9540 | 0, /* 32 adv_err_addr */ | |
9541 | 0, /* 33 saved_dvc_err_code */ | |
9542 | 0, /* 34 saved_adv_err_code */ | |
9543 | 0, /* 35 saved_adv_err_addr */ | |
9544 | 0, /* 36 reserved */ | |
9545 | 0, /* 37 reserved */ | |
9546 | 0, /* 38 reserved */ | |
9547 | 0, /* 39 reserved */ | |
9548 | 0, /* 40 reserved */ | |
9549 | 0, /* 41 reserved */ | |
9550 | 0, /* 42 reserved */ | |
9551 | 0, /* 43 reserved */ | |
9552 | 0, /* 44 reserved */ | |
9553 | 0, /* 45 reserved */ | |
9554 | 0, /* 46 reserved */ | |
9555 | 0, /* 47 reserved */ | |
9556 | 0, /* 48 reserved */ | |
9557 | 0, /* 49 reserved */ | |
9558 | 0, /* 50 reserved */ | |
9559 | 0, /* 51 reserved */ | |
9560 | 0, /* 52 reserved */ | |
9561 | 0, /* 53 reserved */ | |
9562 | 0, /* 54 reserved */ | |
9563 | 0, /* 55 reserved */ | |
9564 | 0, /* 56 cisptr_lsw */ | |
9565 | 0, /* 57 cisprt_msw */ | |
9566 | PCI_VENDOR_ID_ASP, /* 58 subsysvid */ | |
9567 | PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */ | |
9568 | 0, /* 60 reserved */ | |
9569 | 0, /* 61 reserved */ | |
9570 | 0, /* 62 reserved */ | |
9571 | 0 /* 63 reserved */ | |
9572 | }; | |
27c868c2 | 9573 | |
6f039790 | 9574 | static ADVEEP_38C0800_CONFIG ADVEEP_38C0800_Config_Field_IsChar = { |
51219358 MW |
9575 | 0, /* 00 cfg_lsw */ |
9576 | 0, /* 01 cfg_msw */ | |
9577 | 0, /* 02 disc_enable */ | |
9578 | 0, /* 03 wdtr_able */ | |
9579 | 0, /* 04 sdtr_speed1 */ | |
9580 | 0, /* 05 start_motor */ | |
9581 | 0, /* 06 tagqng_able */ | |
9582 | 0, /* 07 bios_scan */ | |
9583 | 0, /* 08 scam_tolerant */ | |
9584 | 1, /* 09 adapter_scsi_id */ | |
9585 | 1, /* bios_boot_delay */ | |
9586 | 1, /* 10 scsi_reset_delay */ | |
9587 | 1, /* bios_id_lun */ | |
9588 | 1, /* 11 termination_se */ | |
9589 | 1, /* termination_lvd */ | |
9590 | 0, /* 12 bios_ctrl */ | |
9591 | 0, /* 13 sdtr_speed2 */ | |
9592 | 0, /* 14 sdtr_speed3 */ | |
9593 | 1, /* 15 max_host_qng */ | |
9594 | 1, /* max_dvc_qng */ | |
9595 | 0, /* 16 dvc_cntl */ | |
9596 | 0, /* 17 sdtr_speed4 */ | |
9597 | 0, /* 18 serial_number_word1 */ | |
9598 | 0, /* 19 serial_number_word2 */ | |
9599 | 0, /* 20 serial_number_word3 */ | |
9600 | 0, /* 21 check_sum */ | |
9601 | {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} | |
9602 | , /* 22-29 oem_name[16] */ | |
9603 | 0, /* 30 dvc_err_code */ | |
9604 | 0, /* 31 adv_err_code */ | |
9605 | 0, /* 32 adv_err_addr */ | |
9606 | 0, /* 33 saved_dvc_err_code */ | |
9607 | 0, /* 34 saved_adv_err_code */ | |
9608 | 0, /* 35 saved_adv_err_addr */ | |
9609 | 0, /* 36 reserved */ | |
9610 | 0, /* 37 reserved */ | |
9611 | 0, /* 38 reserved */ | |
9612 | 0, /* 39 reserved */ | |
9613 | 0, /* 40 reserved */ | |
9614 | 0, /* 41 reserved */ | |
9615 | 0, /* 42 reserved */ | |
9616 | 0, /* 43 reserved */ | |
9617 | 0, /* 44 reserved */ | |
9618 | 0, /* 45 reserved */ | |
9619 | 0, /* 46 reserved */ | |
9620 | 0, /* 47 reserved */ | |
9621 | 0, /* 48 reserved */ | |
9622 | 0, /* 49 reserved */ | |
9623 | 0, /* 50 reserved */ | |
9624 | 0, /* 51 reserved */ | |
9625 | 0, /* 52 reserved */ | |
9626 | 0, /* 53 reserved */ | |
9627 | 0, /* 54 reserved */ | |
9628 | 0, /* 55 reserved */ | |
9629 | 0, /* 56 cisptr_lsw */ | |
9630 | 0, /* 57 cisprt_msw */ | |
9631 | 0, /* 58 subsysvid */ | |
9632 | 0, /* 59 subsysid */ | |
9633 | 0, /* 60 reserved */ | |
9634 | 0, /* 61 reserved */ | |
9635 | 0, /* 62 reserved */ | |
9636 | 0 /* 63 reserved */ | |
9637 | }; | |
27c868c2 | 9638 | |
6f039790 | 9639 | static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config = { |
51219358 MW |
9640 | ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ |
9641 | 0x0000, /* 01 cfg_msw */ | |
9642 | 0xFFFF, /* 02 disc_enable */ | |
9643 | 0xFFFF, /* 03 wdtr_able */ | |
9644 | 0x5555, /* 04 sdtr_speed1 */ | |
9645 | 0xFFFF, /* 05 start_motor */ | |
9646 | 0xFFFF, /* 06 tagqng_able */ | |
9647 | 0xFFFF, /* 07 bios_scan */ | |
9648 | 0, /* 08 scam_tolerant */ | |
9649 | 7, /* 09 adapter_scsi_id */ | |
9650 | 0, /* bios_boot_delay */ | |
9651 | 3, /* 10 scsi_reset_delay */ | |
9652 | 0, /* bios_id_lun */ | |
9653 | 0, /* 11 termination_se */ | |
9654 | 0, /* termination_lvd */ | |
9655 | 0xFFE7, /* 12 bios_ctrl */ | |
9656 | 0x5555, /* 13 sdtr_speed2 */ | |
9657 | 0x5555, /* 14 sdtr_speed3 */ | |
9658 | ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ | |
9659 | ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ | |
9660 | 0, /* 16 dvc_cntl */ | |
9661 | 0x5555, /* 17 sdtr_speed4 */ | |
9662 | 0, /* 18 serial_number_word1 */ | |
9663 | 0, /* 19 serial_number_word2 */ | |
9664 | 0, /* 20 serial_number_word3 */ | |
9665 | 0, /* 21 check_sum */ | |
9666 | {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} | |
9667 | , /* 22-29 oem_name[16] */ | |
9668 | 0, /* 30 dvc_err_code */ | |
9669 | 0, /* 31 adv_err_code */ | |
9670 | 0, /* 32 adv_err_addr */ | |
9671 | 0, /* 33 saved_dvc_err_code */ | |
9672 | 0, /* 34 saved_adv_err_code */ | |
9673 | 0, /* 35 saved_adv_err_addr */ | |
9674 | 0, /* 36 reserved */ | |
9675 | 0, /* 37 reserved */ | |
9676 | 0, /* 38 reserved */ | |
9677 | 0, /* 39 reserved */ | |
9678 | 0, /* 40 reserved */ | |
9679 | 0, /* 41 reserved */ | |
9680 | 0, /* 42 reserved */ | |
9681 | 0, /* 43 reserved */ | |
9682 | 0, /* 44 reserved */ | |
9683 | 0, /* 45 reserved */ | |
9684 | 0, /* 46 reserved */ | |
9685 | 0, /* 47 reserved */ | |
9686 | 0, /* 48 reserved */ | |
9687 | 0, /* 49 reserved */ | |
9688 | 0, /* 50 reserved */ | |
9689 | 0, /* 51 reserved */ | |
9690 | 0, /* 52 reserved */ | |
9691 | 0, /* 53 reserved */ | |
9692 | 0, /* 54 reserved */ | |
9693 | 0, /* 55 reserved */ | |
9694 | 0, /* 56 cisptr_lsw */ | |
9695 | 0, /* 57 cisprt_msw */ | |
9696 | PCI_VENDOR_ID_ASP, /* 58 subsysvid */ | |
9697 | PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */ | |
9698 | 0, /* 60 reserved */ | |
9699 | 0, /* 61 reserved */ | |
9700 | 0, /* 62 reserved */ | |
9701 | 0 /* 63 reserved */ | |
9702 | }; | |
1da177e4 | 9703 | |
6f039790 | 9704 | static ADVEEP_38C1600_CONFIG ADVEEP_38C1600_Config_Field_IsChar = { |
51219358 MW |
9705 | 0, /* 00 cfg_lsw */ |
9706 | 0, /* 01 cfg_msw */ | |
9707 | 0, /* 02 disc_enable */ | |
9708 | 0, /* 03 wdtr_able */ | |
9709 | 0, /* 04 sdtr_speed1 */ | |
9710 | 0, /* 05 start_motor */ | |
9711 | 0, /* 06 tagqng_able */ | |
9712 | 0, /* 07 bios_scan */ | |
9713 | 0, /* 08 scam_tolerant */ | |
9714 | 1, /* 09 adapter_scsi_id */ | |
9715 | 1, /* bios_boot_delay */ | |
9716 | 1, /* 10 scsi_reset_delay */ | |
9717 | 1, /* bios_id_lun */ | |
9718 | 1, /* 11 termination_se */ | |
9719 | 1, /* termination_lvd */ | |
9720 | 0, /* 12 bios_ctrl */ | |
9721 | 0, /* 13 sdtr_speed2 */ | |
9722 | 0, /* 14 sdtr_speed3 */ | |
9723 | 1, /* 15 max_host_qng */ | |
9724 | 1, /* max_dvc_qng */ | |
9725 | 0, /* 16 dvc_cntl */ | |
9726 | 0, /* 17 sdtr_speed4 */ | |
9727 | 0, /* 18 serial_number_word1 */ | |
9728 | 0, /* 19 serial_number_word2 */ | |
9729 | 0, /* 20 serial_number_word3 */ | |
9730 | 0, /* 21 check_sum */ | |
9731 | {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} | |
9732 | , /* 22-29 oem_name[16] */ | |
9733 | 0, /* 30 dvc_err_code */ | |
9734 | 0, /* 31 adv_err_code */ | |
9735 | 0, /* 32 adv_err_addr */ | |
9736 | 0, /* 33 saved_dvc_err_code */ | |
9737 | 0, /* 34 saved_adv_err_code */ | |
9738 | 0, /* 35 saved_adv_err_addr */ | |
9739 | 0, /* 36 reserved */ | |
9740 | 0, /* 37 reserved */ | |
9741 | 0, /* 38 reserved */ | |
9742 | 0, /* 39 reserved */ | |
9743 | 0, /* 40 reserved */ | |
9744 | 0, /* 41 reserved */ | |
9745 | 0, /* 42 reserved */ | |
9746 | 0, /* 43 reserved */ | |
9747 | 0, /* 44 reserved */ | |
9748 | 0, /* 45 reserved */ | |
9749 | 0, /* 46 reserved */ | |
9750 | 0, /* 47 reserved */ | |
9751 | 0, /* 48 reserved */ | |
9752 | 0, /* 49 reserved */ | |
9753 | 0, /* 50 reserved */ | |
9754 | 0, /* 51 reserved */ | |
9755 | 0, /* 52 reserved */ | |
9756 | 0, /* 53 reserved */ | |
9757 | 0, /* 54 reserved */ | |
9758 | 0, /* 55 reserved */ | |
9759 | 0, /* 56 cisptr_lsw */ | |
9760 | 0, /* 57 cisprt_msw */ | |
9761 | 0, /* 58 subsysvid */ | |
9762 | 0, /* 59 subsysid */ | |
9763 | 0, /* 60 reserved */ | |
9764 | 0, /* 61 reserved */ | |
9765 | 0, /* 62 reserved */ | |
9766 | 0 /* 63 reserved */ | |
9767 | }; | |
1da177e4 LT |
9768 | |
9769 | /* | |
51219358 | 9770 | * Wait for EEPROM command to complete |
1da177e4 | 9771 | */ |
6f039790 | 9772 | static void AdvWaitEEPCmd(AdvPortAddr iop_base) |
1da177e4 | 9773 | { |
51219358 | 9774 | int eep_delay_ms; |
27c868c2 | 9775 | |
51219358 MW |
9776 | for (eep_delay_ms = 0; eep_delay_ms < ADV_EEP_DELAY_MS; eep_delay_ms++) { |
9777 | if (AdvReadWordRegister(iop_base, IOPW_EE_CMD) & | |
9778 | ASC_EEP_CMD_DONE) { | |
9779 | break; | |
27c868c2 | 9780 | } |
51219358 | 9781 | mdelay(1); |
27c868c2 | 9782 | } |
51219358 MW |
9783 | if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE) == |
9784 | 0) | |
9785 | BUG(); | |
1da177e4 LT |
9786 | } |
9787 | ||
9788 | /* | |
51219358 | 9789 | * Read the EEPROM from specified location |
1da177e4 | 9790 | */ |
6f039790 | 9791 | static ushort AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr) |
51219358 MW |
9792 | { |
9793 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9794 | ASC_EEP_CMD_READ | eep_word_addr); | |
9795 | AdvWaitEEPCmd(iop_base); | |
9796 | return AdvReadWordRegister(iop_base, IOPW_EE_DATA); | |
9797 | } | |
9798 | ||
9799 | /* | |
9800 | * Write the EEPROM from 'cfg_buf'. | |
9801 | */ | |
6f039790 GKH |
9802 | static void AdvSet3550EEPConfig(AdvPortAddr iop_base, |
9803 | ADVEEP_3550_CONFIG *cfg_buf) | |
1da177e4 | 9804 | { |
27c868c2 | 9805 | ushort *wbuf; |
51219358 | 9806 | ushort addr, chksum; |
27c868c2 MW |
9807 | ushort *charfields; |
9808 | ||
27c868c2 | 9809 | wbuf = (ushort *)cfg_buf; |
51219358 | 9810 | charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; |
27c868c2 MW |
9811 | chksum = 0; |
9812 | ||
51219358 MW |
9813 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); |
9814 | AdvWaitEEPCmd(iop_base); | |
9815 | ||
9816 | /* | |
9817 | * Write EEPROM from word 0 to word 20. | |
9818 | */ | |
9819 | for (addr = ADV_EEP_DVC_CFG_BEGIN; | |
9820 | addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { | |
9821 | ushort word; | |
9822 | ||
27c868c2 | 9823 | if (*charfields++) { |
51219358 | 9824 | word = cpu_to_le16(*wbuf); |
27c868c2 | 9825 | } else { |
51219358 | 9826 | word = *wbuf; |
27c868c2 | 9827 | } |
51219358 MW |
9828 | chksum += *wbuf; /* Checksum is calculated from word values. */ |
9829 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); | |
9830 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9831 | ASC_EEP_CMD_WRITE | addr); | |
9832 | AdvWaitEEPCmd(iop_base); | |
9833 | mdelay(ADV_EEP_DELAY_MS); | |
27c868c2 | 9834 | } |
51219358 MW |
9835 | |
9836 | /* | |
9837 | * Write EEPROM checksum at word 21. | |
9838 | */ | |
9839 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); | |
9840 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); | |
9841 | AdvWaitEEPCmd(iop_base); | |
27c868c2 MW |
9842 | wbuf++; |
9843 | charfields++; | |
9844 | ||
51219358 MW |
9845 | /* |
9846 | * Write EEPROM OEM name at words 22 to 29. | |
9847 | */ | |
9848 | for (addr = ADV_EEP_DVC_CTL_BEGIN; | |
9849 | addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { | |
9850 | ushort word; | |
9851 | ||
27c868c2 | 9852 | if (*charfields++) { |
51219358 MW |
9853 | word = cpu_to_le16(*wbuf); |
9854 | } else { | |
9855 | word = *wbuf; | |
27c868c2 | 9856 | } |
51219358 MW |
9857 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); |
9858 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9859 | ASC_EEP_CMD_WRITE | addr); | |
9860 | AdvWaitEEPCmd(iop_base); | |
27c868c2 | 9861 | } |
51219358 MW |
9862 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); |
9863 | AdvWaitEEPCmd(iop_base); | |
1da177e4 LT |
9864 | } |
9865 | ||
9866 | /* | |
51219358 | 9867 | * Write the EEPROM from 'cfg_buf'. |
1da177e4 | 9868 | */ |
6f039790 GKH |
9869 | static void AdvSet38C0800EEPConfig(AdvPortAddr iop_base, |
9870 | ADVEEP_38C0800_CONFIG *cfg_buf) | |
1da177e4 | 9871 | { |
27c868c2 | 9872 | ushort *wbuf; |
27c868c2 | 9873 | ushort *charfields; |
51219358 | 9874 | ushort addr, chksum; |
27c868c2 | 9875 | |
27c868c2 | 9876 | wbuf = (ushort *)cfg_buf; |
51219358 | 9877 | charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; |
27c868c2 MW |
9878 | chksum = 0; |
9879 | ||
51219358 MW |
9880 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); |
9881 | AdvWaitEEPCmd(iop_base); | |
9882 | ||
9883 | /* | |
9884 | * Write EEPROM from word 0 to word 20. | |
9885 | */ | |
9886 | for (addr = ADV_EEP_DVC_CFG_BEGIN; | |
9887 | addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { | |
9888 | ushort word; | |
9889 | ||
27c868c2 | 9890 | if (*charfields++) { |
51219358 | 9891 | word = cpu_to_le16(*wbuf); |
27c868c2 | 9892 | } else { |
51219358 | 9893 | word = *wbuf; |
27c868c2 | 9894 | } |
51219358 MW |
9895 | chksum += *wbuf; /* Checksum is calculated from word values. */ |
9896 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); | |
9897 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9898 | ASC_EEP_CMD_WRITE | addr); | |
9899 | AdvWaitEEPCmd(iop_base); | |
9900 | mdelay(ADV_EEP_DELAY_MS); | |
27c868c2 | 9901 | } |
51219358 MW |
9902 | |
9903 | /* | |
9904 | * Write EEPROM checksum at word 21. | |
9905 | */ | |
9906 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); | |
9907 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); | |
9908 | AdvWaitEEPCmd(iop_base); | |
27c868c2 MW |
9909 | wbuf++; |
9910 | charfields++; | |
9911 | ||
51219358 MW |
9912 | /* |
9913 | * Write EEPROM OEM name at words 22 to 29. | |
9914 | */ | |
9915 | for (addr = ADV_EEP_DVC_CTL_BEGIN; | |
9916 | addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { | |
9917 | ushort word; | |
9918 | ||
27c868c2 | 9919 | if (*charfields++) { |
51219358 MW |
9920 | word = cpu_to_le16(*wbuf); |
9921 | } else { | |
9922 | word = *wbuf; | |
27c868c2 | 9923 | } |
51219358 MW |
9924 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); |
9925 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9926 | ASC_EEP_CMD_WRITE | addr); | |
9927 | AdvWaitEEPCmd(iop_base); | |
27c868c2 | 9928 | } |
51219358 | 9929 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); |
27c868c2 | 9930 | AdvWaitEEPCmd(iop_base); |
1da177e4 LT |
9931 | } |
9932 | ||
9933 | /* | |
9934 | * Write the EEPROM from 'cfg_buf'. | |
9935 | */ | |
6f039790 GKH |
9936 | static void AdvSet38C1600EEPConfig(AdvPortAddr iop_base, |
9937 | ADVEEP_38C1600_CONFIG *cfg_buf) | |
1da177e4 | 9938 | { |
27c868c2 | 9939 | ushort *wbuf; |
27c868c2 | 9940 | ushort *charfields; |
51219358 | 9941 | ushort addr, chksum; |
27c868c2 MW |
9942 | |
9943 | wbuf = (ushort *)cfg_buf; | |
51219358 | 9944 | charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; |
27c868c2 MW |
9945 | chksum = 0; |
9946 | ||
9947 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); | |
9948 | AdvWaitEEPCmd(iop_base); | |
9949 | ||
9950 | /* | |
9951 | * Write EEPROM from word 0 to word 20. | |
9952 | */ | |
9953 | for (addr = ADV_EEP_DVC_CFG_BEGIN; | |
9954 | addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { | |
9955 | ushort word; | |
9956 | ||
9957 | if (*charfields++) { | |
9958 | word = cpu_to_le16(*wbuf); | |
9959 | } else { | |
9960 | word = *wbuf; | |
9961 | } | |
9962 | chksum += *wbuf; /* Checksum is calculated from word values. */ | |
9963 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); | |
9964 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9965 | ASC_EEP_CMD_WRITE | addr); | |
9966 | AdvWaitEEPCmd(iop_base); | |
b009bef6 | 9967 | mdelay(ADV_EEP_DELAY_MS); |
27c868c2 | 9968 | } |
1da177e4 | 9969 | |
27c868c2 MW |
9970 | /* |
9971 | * Write EEPROM checksum at word 21. | |
9972 | */ | |
9973 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); | |
9974 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); | |
9975 | AdvWaitEEPCmd(iop_base); | |
9976 | wbuf++; | |
9977 | charfields++; | |
9978 | ||
9979 | /* | |
9980 | * Write EEPROM OEM name at words 22 to 29. | |
9981 | */ | |
9982 | for (addr = ADV_EEP_DVC_CTL_BEGIN; | |
9983 | addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { | |
9984 | ushort word; | |
9985 | ||
9986 | if (*charfields++) { | |
9987 | word = cpu_to_le16(*wbuf); | |
9988 | } else { | |
9989 | word = *wbuf; | |
9990 | } | |
9991 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); | |
9992 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, | |
9993 | ASC_EEP_CMD_WRITE | addr); | |
9994 | AdvWaitEEPCmd(iop_base); | |
9995 | } | |
9996 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); | |
9997 | AdvWaitEEPCmd(iop_base); | |
1da177e4 LT |
9998 | } |
9999 | ||
10000 | /* | |
51219358 MW |
10001 | * Read EEPROM configuration into the specified buffer. |
10002 | * | |
10003 | * Return a checksum based on the EEPROM configuration read. | |
1da177e4 | 10004 | */ |
6f039790 GKH |
10005 | static ushort AdvGet3550EEPConfig(AdvPortAddr iop_base, |
10006 | ADVEEP_3550_CONFIG *cfg_buf) | |
1da177e4 | 10007 | { |
51219358 | 10008 | ushort wval, chksum; |
27c868c2 | 10009 | ushort *wbuf; |
51219358 | 10010 | int eep_addr; |
27c868c2 | 10011 | ushort *charfields; |
27c868c2 | 10012 | |
51219358 | 10013 | charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; |
27c868c2 | 10014 | wbuf = (ushort *)cfg_buf; |
27c868c2 MW |
10015 | chksum = 0; |
10016 | ||
51219358 MW |
10017 | for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; |
10018 | eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { | |
10019 | wval = AdvReadEEPWord(iop_base, eep_addr); | |
10020 | chksum += wval; /* Checksum is calculated from word values. */ | |
10021 | if (*charfields++) { | |
10022 | *wbuf = le16_to_cpu(wval); | |
10023 | } else { | |
10024 | *wbuf = wval; | |
10025 | } | |
10026 | } | |
10027 | /* Read checksum word. */ | |
10028 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
10029 | wbuf++; | |
10030 | charfields++; | |
27c868c2 | 10031 | |
51219358 MW |
10032 | /* Read rest of EEPROM not covered by the checksum. */ |
10033 | for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; | |
10034 | eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { | |
10035 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
10036 | if (*charfields++) { | |
10037 | *wbuf = le16_to_cpu(*wbuf); | |
10038 | } | |
10039 | } | |
10040 | return chksum; | |
10041 | } | |
10042 | ||
10043 | /* | |
10044 | * Read EEPROM configuration into the specified buffer. | |
10045 | * | |
10046 | * Return a checksum based on the EEPROM configuration read. | |
10047 | */ | |
6f039790 GKH |
10048 | static ushort AdvGet38C0800EEPConfig(AdvPortAddr iop_base, |
10049 | ADVEEP_38C0800_CONFIG *cfg_buf) | |
51219358 MW |
10050 | { |
10051 | ushort wval, chksum; | |
10052 | ushort *wbuf; | |
10053 | int eep_addr; | |
10054 | ushort *charfields; | |
27c868c2 | 10055 | |
51219358 MW |
10056 | charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; |
10057 | wbuf = (ushort *)cfg_buf; | |
10058 | chksum = 0; | |
10059 | ||
10060 | for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; | |
10061 | eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { | |
10062 | wval = AdvReadEEPWord(iop_base, eep_addr); | |
10063 | chksum += wval; /* Checksum is calculated from word values. */ | |
27c868c2 | 10064 | if (*charfields++) { |
51219358 | 10065 | *wbuf = le16_to_cpu(wval); |
27c868c2 | 10066 | } else { |
51219358 | 10067 | *wbuf = wval; |
27c868c2 | 10068 | } |
27c868c2 | 10069 | } |
51219358 MW |
10070 | /* Read checksum word. */ |
10071 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
27c868c2 MW |
10072 | wbuf++; |
10073 | charfields++; | |
10074 | ||
51219358 MW |
10075 | /* Read rest of EEPROM not covered by the checksum. */ |
10076 | for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; | |
10077 | eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { | |
10078 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
27c868c2 | 10079 | if (*charfields++) { |
51219358 | 10080 | *wbuf = le16_to_cpu(*wbuf); |
27c868c2 | 10081 | } |
27c868c2 | 10082 | } |
51219358 | 10083 | return chksum; |
1da177e4 LT |
10084 | } |
10085 | ||
10086 | /* | |
51219358 MW |
10087 | * Read EEPROM configuration into the specified buffer. |
10088 | * | |
10089 | * Return a checksum based on the EEPROM configuration read. | |
1da177e4 | 10090 | */ |
6f039790 GKH |
10091 | static ushort AdvGet38C1600EEPConfig(AdvPortAddr iop_base, |
10092 | ADVEEP_38C1600_CONFIG *cfg_buf) | |
1da177e4 | 10093 | { |
51219358 | 10094 | ushort wval, chksum; |
27c868c2 | 10095 | ushort *wbuf; |
51219358 | 10096 | int eep_addr; |
27c868c2 | 10097 | ushort *charfields; |
27c868c2 | 10098 | |
27c868c2 | 10099 | charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; |
51219358 | 10100 | wbuf = (ushort *)cfg_buf; |
27c868c2 MW |
10101 | chksum = 0; |
10102 | ||
51219358 MW |
10103 | for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; |
10104 | eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { | |
10105 | wval = AdvReadEEPWord(iop_base, eep_addr); | |
10106 | chksum += wval; /* Checksum is calculated from word values. */ | |
27c868c2 | 10107 | if (*charfields++) { |
51219358 | 10108 | *wbuf = le16_to_cpu(wval); |
27c868c2 | 10109 | } else { |
51219358 | 10110 | *wbuf = wval; |
27c868c2 | 10111 | } |
27c868c2 | 10112 | } |
51219358 MW |
10113 | /* Read checksum word. */ |
10114 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
27c868c2 MW |
10115 | wbuf++; |
10116 | charfields++; | |
10117 | ||
51219358 MW |
10118 | /* Read rest of EEPROM not covered by the checksum. */ |
10119 | for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; | |
10120 | eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { | |
10121 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); | |
27c868c2 | 10122 | if (*charfields++) { |
51219358 | 10123 | *wbuf = le16_to_cpu(*wbuf); |
27c868c2 | 10124 | } |
27c868c2 | 10125 | } |
51219358 | 10126 | return chksum; |
1da177e4 LT |
10127 | } |
10128 | ||
1da177e4 | 10129 | /* |
51219358 MW |
10130 | * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and |
10131 | * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while | |
10132 | * all of this is done. | |
1da177e4 | 10133 | * |
51219358 | 10134 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
1da177e4 | 10135 | * |
51219358 MW |
10136 | * For a non-fatal error return a warning code. If there are no warnings |
10137 | * then 0 is returned. | |
1da177e4 | 10138 | * |
51219358 | 10139 | * Note: Chip is stopped on entry. |
1da177e4 | 10140 | */ |
6f039790 | 10141 | static int AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc) |
1da177e4 | 10142 | { |
27c868c2 | 10143 | AdvPortAddr iop_base; |
51219358 MW |
10144 | ushort warn_code; |
10145 | ADVEEP_3550_CONFIG eep_config; | |
1da177e4 | 10146 | |
27c868c2 | 10147 | iop_base = asc_dvc->iop_base; |
1da177e4 | 10148 | |
51219358 | 10149 | warn_code = 0; |
27c868c2 MW |
10150 | |
10151 | /* | |
51219358 MW |
10152 | * Read the board's EEPROM configuration. |
10153 | * | |
10154 | * Set default values if a bad checksum is found. | |
27c868c2 | 10155 | */ |
51219358 MW |
10156 | if (AdvGet3550EEPConfig(iop_base, &eep_config) != eep_config.check_sum) { |
10157 | warn_code |= ASC_WARN_EEPROM_CHKSUM; | |
27c868c2 | 10158 | |
51219358 MW |
10159 | /* |
10160 | * Set EEPROM default values. | |
10161 | */ | |
10162 | memcpy(&eep_config, &Default_3550_EEPROM_Config, | |
10163 | sizeof(ADVEEP_3550_CONFIG)); | |
27c868c2 | 10164 | |
51219358 MW |
10165 | /* |
10166 | * Assume the 6 byte board serial number that was read from | |
10167 | * EEPROM is correct even if the EEPROM checksum failed. | |
10168 | */ | |
10169 | eep_config.serial_number_word3 = | |
10170 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); | |
27c868c2 | 10171 | |
51219358 MW |
10172 | eep_config.serial_number_word2 = |
10173 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); | |
27c868c2 | 10174 | |
51219358 MW |
10175 | eep_config.serial_number_word1 = |
10176 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); | |
27c868c2 | 10177 | |
51219358 MW |
10178 | AdvSet3550EEPConfig(iop_base, &eep_config); |
10179 | } | |
10180 | /* | |
10181 | * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the | |
10182 | * EEPROM configuration that was read. | |
10183 | * | |
10184 | * This is the mapping of EEPROM fields to Adv Library fields. | |
10185 | */ | |
10186 | asc_dvc->wdtr_able = eep_config.wdtr_able; | |
10187 | asc_dvc->sdtr_able = eep_config.sdtr_able; | |
10188 | asc_dvc->ultra_able = eep_config.ultra_able; | |
10189 | asc_dvc->tagqng_able = eep_config.tagqng_able; | |
10190 | asc_dvc->cfg->disc_enable = eep_config.disc_enable; | |
10191 | asc_dvc->max_host_qng = eep_config.max_host_qng; | |
10192 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
10193 | asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); | |
10194 | asc_dvc->start_motor = eep_config.start_motor; | |
10195 | asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; | |
10196 | asc_dvc->bios_ctrl = eep_config.bios_ctrl; | |
10197 | asc_dvc->no_scam = eep_config.scam_tolerant; | |
10198 | asc_dvc->cfg->serial1 = eep_config.serial_number_word1; | |
10199 | asc_dvc->cfg->serial2 = eep_config.serial_number_word2; | |
10200 | asc_dvc->cfg->serial3 = eep_config.serial_number_word3; | |
27c868c2 | 10201 | |
27c868c2 | 10202 | /* |
51219358 MW |
10203 | * Set the host maximum queuing (max. 253, min. 16) and the per device |
10204 | * maximum queuing (max. 63, min. 4). | |
27c868c2 | 10205 | */ |
51219358 MW |
10206 | if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { |
10207 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10208 | } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { | |
10209 | /* If the value is zero, assume it is uninitialized. */ | |
10210 | if (eep_config.max_host_qng == 0) { | |
10211 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10212 | } else { | |
10213 | eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; | |
10214 | } | |
10215 | } | |
10216 | ||
10217 | if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { | |
10218 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10219 | } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { | |
10220 | /* If the value is zero, assume it is uninitialized. */ | |
10221 | if (eep_config.max_dvc_qng == 0) { | |
10222 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10223 | } else { | |
10224 | eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; | |
10225 | } | |
10226 | } | |
27c868c2 MW |
10227 | |
10228 | /* | |
51219358 MW |
10229 | * If 'max_dvc_qng' is greater than 'max_host_qng', then |
10230 | * set 'max_dvc_qng' to 'max_host_qng'. | |
27c868c2 | 10231 | */ |
51219358 MW |
10232 | if (eep_config.max_dvc_qng > eep_config.max_host_qng) { |
10233 | eep_config.max_dvc_qng = eep_config.max_host_qng; | |
10234 | } | |
27c868c2 MW |
10235 | |
10236 | /* | |
51219358 MW |
10237 | * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' |
10238 | * values based on possibly adjusted EEPROM values. | |
27c868c2 | 10239 | */ |
51219358 MW |
10240 | asc_dvc->max_host_qng = eep_config.max_host_qng; |
10241 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
27c868c2 MW |
10242 | |
10243 | /* | |
51219358 MW |
10244 | * If the EEPROM 'termination' field is set to automatic (0), then set |
10245 | * the ADV_DVC_CFG 'termination' field to automatic also. | |
10246 | * | |
10247 | * If the termination is specified with a non-zero 'termination' | |
10248 | * value check that a legal value is set and set the ADV_DVC_CFG | |
10249 | * 'termination' field appropriately. | |
27c868c2 | 10250 | */ |
51219358 MW |
10251 | if (eep_config.termination == 0) { |
10252 | asc_dvc->cfg->termination = 0; /* auto termination */ | |
10253 | } else { | |
10254 | /* Enable manual control with low off / high off. */ | |
10255 | if (eep_config.termination == 1) { | |
10256 | asc_dvc->cfg->termination = TERM_CTL_SEL; | |
27c868c2 | 10257 | |
51219358 MW |
10258 | /* Enable manual control with low off / high on. */ |
10259 | } else if (eep_config.termination == 2) { | |
10260 | asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H; | |
10261 | ||
10262 | /* Enable manual control with low on / high on. */ | |
10263 | } else if (eep_config.termination == 3) { | |
10264 | asc_dvc->cfg->termination = | |
10265 | TERM_CTL_SEL | TERM_CTL_H | TERM_CTL_L; | |
10266 | } else { | |
27c868c2 | 10267 | /* |
51219358 MW |
10268 | * The EEPROM 'termination' field contains a bad value. Use |
10269 | * automatic termination instead. | |
27c868c2 | 10270 | */ |
51219358 MW |
10271 | asc_dvc->cfg->termination = 0; |
10272 | warn_code |= ASC_WARN_EEPROM_TERMINATION; | |
27c868c2 | 10273 | } |
27c868c2 | 10274 | } |
1da177e4 | 10275 | |
51219358 | 10276 | return warn_code; |
1da177e4 LT |
10277 | } |
10278 | ||
10279 | /* | |
51219358 MW |
10280 | * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and |
10281 | * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while | |
10282 | * all of this is done. | |
1da177e4 | 10283 | * |
51219358 MW |
10284 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
10285 | * | |
10286 | * For a non-fatal error return a warning code. If there are no warnings | |
10287 | * then 0 is returned. | |
10288 | * | |
10289 | * Note: Chip is stopped on entry. | |
1da177e4 | 10290 | */ |
6f039790 | 10291 | static int AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc) |
1da177e4 | 10292 | { |
51219358 MW |
10293 | AdvPortAddr iop_base; |
10294 | ushort warn_code; | |
10295 | ADVEEP_38C0800_CONFIG eep_config; | |
10296 | uchar tid, termination; | |
10297 | ushort sdtr_speed = 0; | |
27c868c2 | 10298 | |
51219358 | 10299 | iop_base = asc_dvc->iop_base; |
1da177e4 | 10300 | |
51219358 | 10301 | warn_code = 0; |
27c868c2 MW |
10302 | |
10303 | /* | |
51219358 MW |
10304 | * Read the board's EEPROM configuration. |
10305 | * | |
10306 | * Set default values if a bad checksum is found. | |
27c868c2 | 10307 | */ |
51219358 MW |
10308 | if (AdvGet38C0800EEPConfig(iop_base, &eep_config) != |
10309 | eep_config.check_sum) { | |
10310 | warn_code |= ASC_WARN_EEPROM_CHKSUM; | |
27c868c2 | 10311 | |
51219358 MW |
10312 | /* |
10313 | * Set EEPROM default values. | |
10314 | */ | |
10315 | memcpy(&eep_config, &Default_38C0800_EEPROM_Config, | |
10316 | sizeof(ADVEEP_38C0800_CONFIG)); | |
1da177e4 | 10317 | |
51219358 MW |
10318 | /* |
10319 | * Assume the 6 byte board serial number that was read from | |
10320 | * EEPROM is correct even if the EEPROM checksum failed. | |
10321 | */ | |
10322 | eep_config.serial_number_word3 = | |
10323 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); | |
1da177e4 | 10324 | |
51219358 MW |
10325 | eep_config.serial_number_word2 = |
10326 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); | |
27c868c2 | 10327 | |
51219358 MW |
10328 | eep_config.serial_number_word1 = |
10329 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); | |
27c868c2 | 10330 | |
51219358 | 10331 | AdvSet38C0800EEPConfig(iop_base, &eep_config); |
27c868c2 | 10332 | } |
27c868c2 | 10333 | /* |
51219358 MW |
10334 | * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the |
10335 | * EEPROM configuration that was read. | |
10336 | * | |
10337 | * This is the mapping of EEPROM fields to Adv Library fields. | |
27c868c2 | 10338 | */ |
51219358 MW |
10339 | asc_dvc->wdtr_able = eep_config.wdtr_able; |
10340 | asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; | |
10341 | asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; | |
10342 | asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; | |
10343 | asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; | |
10344 | asc_dvc->tagqng_able = eep_config.tagqng_able; | |
10345 | asc_dvc->cfg->disc_enable = eep_config.disc_enable; | |
10346 | asc_dvc->max_host_qng = eep_config.max_host_qng; | |
10347 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
10348 | asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); | |
10349 | asc_dvc->start_motor = eep_config.start_motor; | |
10350 | asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; | |
10351 | asc_dvc->bios_ctrl = eep_config.bios_ctrl; | |
10352 | asc_dvc->no_scam = eep_config.scam_tolerant; | |
10353 | asc_dvc->cfg->serial1 = eep_config.serial_number_word1; | |
10354 | asc_dvc->cfg->serial2 = eep_config.serial_number_word2; | |
10355 | asc_dvc->cfg->serial3 = eep_config.serial_number_word3; | |
27c868c2 MW |
10356 | |
10357 | /* | |
51219358 MW |
10358 | * For every Target ID if any of its 'sdtr_speed[1234]' bits |
10359 | * are set, then set an 'sdtr_able' bit for it. | |
27c868c2 | 10360 | */ |
51219358 MW |
10361 | asc_dvc->sdtr_able = 0; |
10362 | for (tid = 0; tid <= ADV_MAX_TID; tid++) { | |
10363 | if (tid == 0) { | |
10364 | sdtr_speed = asc_dvc->sdtr_speed1; | |
10365 | } else if (tid == 4) { | |
10366 | sdtr_speed = asc_dvc->sdtr_speed2; | |
10367 | } else if (tid == 8) { | |
10368 | sdtr_speed = asc_dvc->sdtr_speed3; | |
10369 | } else if (tid == 12) { | |
10370 | sdtr_speed = asc_dvc->sdtr_speed4; | |
10371 | } | |
10372 | if (sdtr_speed & ADV_MAX_TID) { | |
10373 | asc_dvc->sdtr_able |= (1 << tid); | |
10374 | } | |
10375 | sdtr_speed >>= 4; | |
10376 | } | |
27c868c2 MW |
10377 | |
10378 | /* | |
51219358 MW |
10379 | * Set the host maximum queuing (max. 253, min. 16) and the per device |
10380 | * maximum queuing (max. 63, min. 4). | |
27c868c2 | 10381 | */ |
51219358 MW |
10382 | if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { |
10383 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10384 | } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { | |
10385 | /* If the value is zero, assume it is uninitialized. */ | |
10386 | if (eep_config.max_host_qng == 0) { | |
10387 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10388 | } else { | |
10389 | eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; | |
10390 | } | |
27c868c2 | 10391 | } |
1da177e4 | 10392 | |
51219358 MW |
10393 | if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { |
10394 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10395 | } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { | |
10396 | /* If the value is zero, assume it is uninitialized. */ | |
10397 | if (eep_config.max_dvc_qng == 0) { | |
10398 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10399 | } else { | |
10400 | eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; | |
10401 | } | |
10402 | } | |
10403 | ||
10404 | /* | |
10405 | * If 'max_dvc_qng' is greater than 'max_host_qng', then | |
10406 | * set 'max_dvc_qng' to 'max_host_qng'. | |
10407 | */ | |
10408 | if (eep_config.max_dvc_qng > eep_config.max_host_qng) { | |
10409 | eep_config.max_dvc_qng = eep_config.max_host_qng; | |
27c868c2 | 10410 | } |
1da177e4 | 10411 | |
27c868c2 | 10412 | /* |
51219358 MW |
10413 | * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' |
10414 | * values based on possibly adjusted EEPROM values. | |
27c868c2 | 10415 | */ |
51219358 MW |
10416 | asc_dvc->max_host_qng = eep_config.max_host_qng; |
10417 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
27c868c2 MW |
10418 | |
10419 | /* | |
51219358 MW |
10420 | * If the EEPROM 'termination' field is set to automatic (0), then set |
10421 | * the ADV_DVC_CFG 'termination' field to automatic also. | |
10422 | * | |
10423 | * If the termination is specified with a non-zero 'termination' | |
10424 | * value check that a legal value is set and set the ADV_DVC_CFG | |
10425 | * 'termination' field appropriately. | |
27c868c2 | 10426 | */ |
51219358 MW |
10427 | if (eep_config.termination_se == 0) { |
10428 | termination = 0; /* auto termination for SE */ | |
10429 | } else { | |
10430 | /* Enable manual control with low off / high off. */ | |
10431 | if (eep_config.termination_se == 1) { | |
10432 | termination = 0; | |
10433 | ||
10434 | /* Enable manual control with low off / high on. */ | |
10435 | } else if (eep_config.termination_se == 2) { | |
10436 | termination = TERM_SE_HI; | |
10437 | ||
10438 | /* Enable manual control with low on / high on. */ | |
10439 | } else if (eep_config.termination_se == 3) { | |
10440 | termination = TERM_SE; | |
10441 | } else { | |
10442 | /* | |
10443 | * The EEPROM 'termination_se' field contains a bad value. | |
10444 | * Use automatic termination instead. | |
10445 | */ | |
10446 | termination = 0; | |
10447 | warn_code |= ASC_WARN_EEPROM_TERMINATION; | |
10448 | } | |
27c868c2 | 10449 | } |
51219358 MW |
10450 | |
10451 | if (eep_config.termination_lvd == 0) { | |
10452 | asc_dvc->cfg->termination = termination; /* auto termination for LVD */ | |
10453 | } else { | |
10454 | /* Enable manual control with low off / high off. */ | |
10455 | if (eep_config.termination_lvd == 1) { | |
10456 | asc_dvc->cfg->termination = termination; | |
10457 | ||
10458 | /* Enable manual control with low off / high on. */ | |
10459 | } else if (eep_config.termination_lvd == 2) { | |
10460 | asc_dvc->cfg->termination = termination | TERM_LVD_HI; | |
10461 | ||
10462 | /* Enable manual control with low on / high on. */ | |
10463 | } else if (eep_config.termination_lvd == 3) { | |
10464 | asc_dvc->cfg->termination = termination | TERM_LVD; | |
10465 | } else { | |
10466 | /* | |
10467 | * The EEPROM 'termination_lvd' field contains a bad value. | |
10468 | * Use automatic termination instead. | |
10469 | */ | |
10470 | asc_dvc->cfg->termination = termination; | |
10471 | warn_code |= ASC_WARN_EEPROM_TERMINATION; | |
10472 | } | |
27c868c2 | 10473 | } |
1da177e4 | 10474 | |
51219358 | 10475 | return warn_code; |
1da177e4 LT |
10476 | } |
10477 | ||
10478 | /* | |
51219358 MW |
10479 | * Read the board's EEPROM configuration. Set fields in ASC_DVC_VAR and |
10480 | * ASC_DVC_CFG based on the EEPROM settings. The chip is stopped while | |
10481 | * all of this is done. | |
1da177e4 | 10482 | * |
51219358 | 10483 | * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. |
1da177e4 | 10484 | * |
51219358 MW |
10485 | * For a non-fatal error return a warning code. If there are no warnings |
10486 | * then 0 is returned. | |
1da177e4 | 10487 | * |
51219358 | 10488 | * Note: Chip is stopped on entry. |
1da177e4 | 10489 | */ |
6f039790 | 10490 | static int AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc) |
1da177e4 | 10491 | { |
27c868c2 | 10492 | AdvPortAddr iop_base; |
51219358 MW |
10493 | ushort warn_code; |
10494 | ADVEEP_38C1600_CONFIG eep_config; | |
10495 | uchar tid, termination; | |
10496 | ushort sdtr_speed = 0; | |
1da177e4 | 10497 | |
27c868c2 MW |
10498 | iop_base = asc_dvc->iop_base; |
10499 | ||
51219358 | 10500 | warn_code = 0; |
27c868c2 | 10501 | |
51219358 MW |
10502 | /* |
10503 | * Read the board's EEPROM configuration. | |
10504 | * | |
10505 | * Set default values if a bad checksum is found. | |
10506 | */ | |
10507 | if (AdvGet38C1600EEPConfig(iop_base, &eep_config) != | |
10508 | eep_config.check_sum) { | |
10509 | struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); | |
10510 | warn_code |= ASC_WARN_EEPROM_CHKSUM; | |
10511 | ||
10512 | /* | |
10513 | * Set EEPROM default values. | |
10514 | */ | |
10515 | memcpy(&eep_config, &Default_38C1600_EEPROM_Config, | |
10516 | sizeof(ADVEEP_38C1600_CONFIG)); | |
10517 | ||
10518 | if (PCI_FUNC(pdev->devfn) != 0) { | |
10519 | u8 ints; | |
10520 | /* | |
10521 | * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60 | |
10522 | * and old Mac system booting problem. The Expansion | |
10523 | * ROM must be disabled in Function 1 for these systems | |
10524 | */ | |
10525 | eep_config.cfg_lsw &= ~ADV_EEPROM_BIOS_ENABLE; | |
10526 | /* | |
10527 | * Clear the INTAB (bit 11) if the GPIO 0 input | |
10528 | * indicates the Function 1 interrupt line is wired | |
10529 | * to INTB. | |
10530 | * | |
10531 | * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input: | |
10532 | * 1 - Function 1 interrupt line wired to INT A. | |
10533 | * 0 - Function 1 interrupt line wired to INT B. | |
10534 | * | |
10535 | * Note: Function 0 is always wired to INTA. | |
10536 | * Put all 5 GPIO bits in input mode and then read | |
10537 | * their input values. | |
10538 | */ | |
10539 | AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0); | |
10540 | ints = AdvReadByteRegister(iop_base, IOPB_GPIO_DATA); | |
10541 | if ((ints & 0x01) == 0) | |
10542 | eep_config.cfg_lsw &= ~ADV_EEPROM_INTAB; | |
10543 | } | |
10544 | ||
10545 | /* | |
10546 | * Assume the 6 byte board serial number that was read from | |
10547 | * EEPROM is correct even if the EEPROM checksum failed. | |
10548 | */ | |
10549 | eep_config.serial_number_word3 = | |
10550 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); | |
10551 | eep_config.serial_number_word2 = | |
10552 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); | |
10553 | eep_config.serial_number_word1 = | |
10554 | AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); | |
10555 | ||
10556 | AdvSet38C1600EEPConfig(iop_base, &eep_config); | |
27c868c2 MW |
10557 | } |
10558 | ||
10559 | /* | |
51219358 MW |
10560 | * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the |
10561 | * EEPROM configuration that was read. | |
10562 | * | |
10563 | * This is the mapping of EEPROM fields to Adv Library fields. | |
27c868c2 | 10564 | */ |
51219358 MW |
10565 | asc_dvc->wdtr_able = eep_config.wdtr_able; |
10566 | asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; | |
10567 | asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; | |
10568 | asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; | |
10569 | asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; | |
10570 | asc_dvc->ppr_able = 0; | |
10571 | asc_dvc->tagqng_able = eep_config.tagqng_able; | |
10572 | asc_dvc->cfg->disc_enable = eep_config.disc_enable; | |
10573 | asc_dvc->max_host_qng = eep_config.max_host_qng; | |
10574 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
10575 | asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ASC_MAX_TID); | |
10576 | asc_dvc->start_motor = eep_config.start_motor; | |
10577 | asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; | |
10578 | asc_dvc->bios_ctrl = eep_config.bios_ctrl; | |
10579 | asc_dvc->no_scam = eep_config.scam_tolerant; | |
27c868c2 | 10580 | |
51219358 MW |
10581 | /* |
10582 | * For every Target ID if any of its 'sdtr_speed[1234]' bits | |
10583 | * are set, then set an 'sdtr_able' bit for it. | |
10584 | */ | |
10585 | asc_dvc->sdtr_able = 0; | |
10586 | for (tid = 0; tid <= ASC_MAX_TID; tid++) { | |
10587 | if (tid == 0) { | |
10588 | sdtr_speed = asc_dvc->sdtr_speed1; | |
10589 | } else if (tid == 4) { | |
10590 | sdtr_speed = asc_dvc->sdtr_speed2; | |
10591 | } else if (tid == 8) { | |
10592 | sdtr_speed = asc_dvc->sdtr_speed3; | |
10593 | } else if (tid == 12) { | |
10594 | sdtr_speed = asc_dvc->sdtr_speed4; | |
10595 | } | |
10596 | if (sdtr_speed & ASC_MAX_TID) { | |
10597 | asc_dvc->sdtr_able |= (1 << tid); | |
10598 | } | |
10599 | sdtr_speed >>= 4; | |
10600 | } | |
27c868c2 | 10601 | |
51219358 MW |
10602 | /* |
10603 | * Set the host maximum queuing (max. 253, min. 16) and the per device | |
10604 | * maximum queuing (max. 63, min. 4). | |
10605 | */ | |
10606 | if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { | |
10607 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10608 | } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { | |
10609 | /* If the value is zero, assume it is uninitialized. */ | |
10610 | if (eep_config.max_host_qng == 0) { | |
10611 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; | |
10612 | } else { | |
10613 | eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; | |
27c868c2 | 10614 | } |
51219358 | 10615 | } |
27c868c2 | 10616 | |
51219358 MW |
10617 | if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { |
10618 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10619 | } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { | |
10620 | /* If the value is zero, assume it is uninitialized. */ | |
10621 | if (eep_config.max_dvc_qng == 0) { | |
10622 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; | |
10623 | } else { | |
10624 | eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; | |
10625 | } | |
10626 | } | |
10627 | ||
10628 | /* | |
10629 | * If 'max_dvc_qng' is greater than 'max_host_qng', then | |
10630 | * set 'max_dvc_qng' to 'max_host_qng'. | |
10631 | */ | |
10632 | if (eep_config.max_dvc_qng > eep_config.max_host_qng) { | |
10633 | eep_config.max_dvc_qng = eep_config.max_host_qng; | |
27c868c2 MW |
10634 | } |
10635 | ||
10636 | /* | |
51219358 MW |
10637 | * Set ASC_DVC_VAR 'max_host_qng' and ASC_DVC_VAR 'max_dvc_qng' |
10638 | * values based on possibly adjusted EEPROM values. | |
10639 | */ | |
10640 | asc_dvc->max_host_qng = eep_config.max_host_qng; | |
10641 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; | |
10642 | ||
10643 | /* | |
10644 | * If the EEPROM 'termination' field is set to automatic (0), then set | |
10645 | * the ASC_DVC_CFG 'termination' field to automatic also. | |
10646 | * | |
10647 | * If the termination is specified with a non-zero 'termination' | |
10648 | * value check that a legal value is set and set the ASC_DVC_CFG | |
10649 | * 'termination' field appropriately. | |
27c868c2 | 10650 | */ |
51219358 MW |
10651 | if (eep_config.termination_se == 0) { |
10652 | termination = 0; /* auto termination for SE */ | |
10653 | } else { | |
10654 | /* Enable manual control with low off / high off. */ | |
10655 | if (eep_config.termination_se == 1) { | |
10656 | termination = 0; | |
27c868c2 | 10657 | |
51219358 MW |
10658 | /* Enable manual control with low off / high on. */ |
10659 | } else if (eep_config.termination_se == 2) { | |
10660 | termination = TERM_SE_HI; | |
27c868c2 | 10661 | |
51219358 MW |
10662 | /* Enable manual control with low on / high on. */ |
10663 | } else if (eep_config.termination_se == 3) { | |
10664 | termination = TERM_SE; | |
10665 | } else { | |
10666 | /* | |
10667 | * The EEPROM 'termination_se' field contains a bad value. | |
10668 | * Use automatic termination instead. | |
10669 | */ | |
10670 | termination = 0; | |
10671 | warn_code |= ASC_WARN_EEPROM_TERMINATION; | |
10672 | } | |
10673 | } | |
27c868c2 | 10674 | |
51219358 MW |
10675 | if (eep_config.termination_lvd == 0) { |
10676 | asc_dvc->cfg->termination = termination; /* auto termination for LVD */ | |
10677 | } else { | |
10678 | /* Enable manual control with low off / high off. */ | |
10679 | if (eep_config.termination_lvd == 1) { | |
10680 | asc_dvc->cfg->termination = termination; | |
27c868c2 | 10681 | |
51219358 MW |
10682 | /* Enable manual control with low off / high on. */ |
10683 | } else if (eep_config.termination_lvd == 2) { | |
10684 | asc_dvc->cfg->termination = termination | TERM_LVD_HI; | |
27c868c2 | 10685 | |
51219358 MW |
10686 | /* Enable manual control with low on / high on. */ |
10687 | } else if (eep_config.termination_lvd == 3) { | |
10688 | asc_dvc->cfg->termination = termination | TERM_LVD; | |
10689 | } else { | |
10690 | /* | |
10691 | * The EEPROM 'termination_lvd' field contains a bad value. | |
10692 | * Use automatic termination instead. | |
10693 | */ | |
10694 | asc_dvc->cfg->termination = termination; | |
10695 | warn_code |= ASC_WARN_EEPROM_TERMINATION; | |
10696 | } | |
27c868c2 | 10697 | } |
51219358 MW |
10698 | |
10699 | return warn_code; | |
1da177e4 LT |
10700 | } |
10701 | ||
10702 | /* | |
51219358 | 10703 | * Initialize the ADV_DVC_VAR structure. |
1da177e4 | 10704 | * |
51219358 | 10705 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
1da177e4 | 10706 | * |
51219358 MW |
10707 | * For a non-fatal error return a warning code. If there are no warnings |
10708 | * then 0 is returned. | |
1da177e4 | 10709 | */ |
6f039790 | 10710 | static int AdvInitGetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) |
1da177e4 | 10711 | { |
9d0e96eb MW |
10712 | struct asc_board *board = shost_priv(shost); |
10713 | ADV_DVC_VAR *asc_dvc = &board->dvc_var.adv_dvc_var; | |
51219358 MW |
10714 | unsigned short warn_code = 0; |
10715 | AdvPortAddr iop_base = asc_dvc->iop_base; | |
10716 | u16 cmd; | |
10717 | int status; | |
27c868c2 | 10718 | |
51219358 | 10719 | asc_dvc->err_code = 0; |
27c868c2 MW |
10720 | |
10721 | /* | |
51219358 MW |
10722 | * Save the state of the PCI Configuration Command Register |
10723 | * "Parity Error Response Control" Bit. If the bit is clear (0), | |
10724 | * in AdvInitAsc3550/38C0800Driver() tell the microcode to ignore | |
10725 | * DMA parity errors. | |
27c868c2 | 10726 | */ |
51219358 MW |
10727 | asc_dvc->cfg->control_flag = 0; |
10728 | pci_read_config_word(pdev, PCI_COMMAND, &cmd); | |
10729 | if ((cmd & PCI_COMMAND_PARITY) == 0) | |
10730 | asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR; | |
27c868c2 | 10731 | |
51219358 MW |
10732 | asc_dvc->cfg->chip_version = |
10733 | AdvGetChipVersion(iop_base, asc_dvc->bus_type); | |
10734 | ||
b352f923 | 10735 | ASC_DBG(1, "iopb_chip_id_1: 0x%x 0x%x\n", |
51219358 MW |
10736 | (ushort)AdvReadByteRegister(iop_base, IOPB_CHIP_ID_1), |
10737 | (ushort)ADV_CHIP_ID_BYTE); | |
10738 | ||
b352f923 | 10739 | ASC_DBG(1, "iopw_chip_id_0: 0x%x 0x%x\n", |
51219358 MW |
10740 | (ushort)AdvReadWordRegister(iop_base, IOPW_CHIP_ID_0), |
10741 | (ushort)ADV_CHIP_ID_WORD); | |
27c868c2 MW |
10742 | |
10743 | /* | |
51219358 | 10744 | * Reset the chip to start and allow register writes. |
27c868c2 | 10745 | */ |
51219358 MW |
10746 | if (AdvFindSignature(iop_base) == 0) { |
10747 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; | |
10748 | return ADV_ERROR; | |
10749 | } else { | |
27c868c2 | 10750 | /* |
51219358 | 10751 | * The caller must set 'chip_type' to a valid setting. |
27c868c2 | 10752 | */ |
51219358 MW |
10753 | if (asc_dvc->chip_type != ADV_CHIP_ASC3550 && |
10754 | asc_dvc->chip_type != ADV_CHIP_ASC38C0800 && | |
10755 | asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { | |
10756 | asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE; | |
10757 | return ADV_ERROR; | |
10758 | } | |
1da177e4 | 10759 | |
51219358 MW |
10760 | /* |
10761 | * Reset Chip. | |
10762 | */ | |
10763 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, | |
10764 | ADV_CTRL_REG_CMD_RESET); | |
10765 | mdelay(100); | |
10766 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, | |
10767 | ADV_CTRL_REG_CMD_WR_IO_REG); | |
10768 | ||
10769 | if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { | |
10770 | status = AdvInitFrom38C1600EEP(asc_dvc); | |
10771 | } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { | |
10772 | status = AdvInitFrom38C0800EEP(asc_dvc); | |
10773 | } else { | |
10774 | status = AdvInitFrom3550EEP(asc_dvc); | |
27c868c2 | 10775 | } |
51219358 | 10776 | warn_code |= status; |
27c868c2 | 10777 | } |
1da177e4 | 10778 | |
9d0e96eb MW |
10779 | if (warn_code != 0) |
10780 | shost_printk(KERN_WARNING, shost, "warning: 0x%x\n", warn_code); | |
51219358 | 10781 | |
9d0e96eb MW |
10782 | if (asc_dvc->err_code) |
10783 | shost_printk(KERN_ERR, shost, "error code 0x%x\n", | |
10784 | asc_dvc->err_code); | |
51219358 MW |
10785 | |
10786 | return asc_dvc->err_code; | |
1da177e4 | 10787 | } |
51219358 MW |
10788 | #endif |
10789 | ||
10790 | static struct scsi_host_template advansys_template = { | |
10791 | .proc_name = DRV_NAME, | |
10792 | #ifdef CONFIG_PROC_FS | |
b59fb6fd | 10793 | .show_info = advansys_show_info, |
51219358 MW |
10794 | #endif |
10795 | .name = DRV_NAME, | |
10796 | .info = advansys_info, | |
10797 | .queuecommand = advansys_queuecommand, | |
eac0b0c7 | 10798 | .eh_host_reset_handler = advansys_reset, |
51219358 MW |
10799 | .bios_param = advansys_biosparam, |
10800 | .slave_configure = advansys_slave_configure, | |
10801 | /* | |
10802 | * Because the driver may control an ISA adapter 'unchecked_isa_dma' | |
10803 | * must be set. The flag will be cleared in advansys_board_found | |
10804 | * for non-ISA adapters. | |
10805 | */ | |
ae26759e | 10806 | .unchecked_isa_dma = true, |
51219358 | 10807 | }; |
1da177e4 | 10808 | |
6f039790 | 10809 | static int advansys_wide_init_chip(struct Scsi_Host *shost) |
b2c16f58 | 10810 | { |
9d0e96eb MW |
10811 | struct asc_board *board = shost_priv(shost); |
10812 | struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; | |
0ce53822 | 10813 | size_t sgblk_pool_size; |
b2c16f58 MW |
10814 | int warn_code, err_code; |
10815 | ||
10816 | /* | |
10817 | * Allocate buffer carrier structures. The total size | |
98b96a7d | 10818 | * is about 8 KB, so allocate all at once. |
b2c16f58 | 10819 | */ |
98b96a7d HR |
10820 | adv_dvc->carrier = dma_alloc_coherent(board->dev, |
10821 | ADV_CARRIER_BUFSIZE, &adv_dvc->carrier_addr, GFP_KERNEL); | |
10822 | ASC_DBG(1, "carrier 0x%p\n", adv_dvc->carrier); | |
b2c16f58 | 10823 | |
98b96a7d | 10824 | if (!adv_dvc->carrier) |
b2c16f58 MW |
10825 | goto kmalloc_failed; |
10826 | ||
10827 | /* | |
10828 | * Allocate up to 'max_host_qng' request structures for the Wide | |
10829 | * board. The total size is about 16 KB, so allocate all at once. | |
10830 | * If the allocation fails decrement and try again. | |
10831 | */ | |
4b47e464 HR |
10832 | board->adv_reqp_size = adv_dvc->max_host_qng * sizeof(adv_req_t); |
10833 | if (board->adv_reqp_size & 0x1f) { | |
10834 | ASC_DBG(1, "unaligned reqp %lu bytes\n", sizeof(adv_req_t)); | |
10835 | board->adv_reqp_size = ADV_32BALIGN(board->adv_reqp_size); | |
b2c16f58 | 10836 | } |
4b47e464 HR |
10837 | board->adv_reqp = dma_alloc_coherent(board->dev, board->adv_reqp_size, |
10838 | &board->adv_reqp_addr, GFP_KERNEL); | |
b2c16f58 | 10839 | |
4b47e464 | 10840 | if (!board->adv_reqp) |
b2c16f58 MW |
10841 | goto kmalloc_failed; |
10842 | ||
4b47e464 HR |
10843 | ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", board->adv_reqp, |
10844 | adv_dvc->max_host_qng, board->adv_reqp_size); | |
b2c16f58 MW |
10845 | |
10846 | /* | |
10847 | * Allocate up to ADV_TOT_SG_BLOCK request structures for | |
10848 | * the Wide board. Each structure is about 136 bytes. | |
10849 | */ | |
0ce53822 HR |
10850 | sgblk_pool_size = sizeof(adv_sgblk_t) * ADV_TOT_SG_BLOCK; |
10851 | board->adv_sgblk_pool = dma_pool_create("adv_sgblk", board->dev, | |
10852 | sgblk_pool_size, 32, 0); | |
b2c16f58 | 10853 | |
0ce53822 HR |
10854 | ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", ADV_TOT_SG_BLOCK, |
10855 | sizeof(adv_sgblk_t), sgblk_pool_size); | |
b2c16f58 | 10856 | |
0ce53822 | 10857 | if (!board->adv_sgblk_pool) |
b2c16f58 MW |
10858 | goto kmalloc_failed; |
10859 | ||
9d0e96eb | 10860 | if (adv_dvc->chip_type == ADV_CHIP_ASC3550) { |
b352f923 | 10861 | ASC_DBG(2, "AdvInitAsc3550Driver()\n"); |
9d0e96eb MW |
10862 | warn_code = AdvInitAsc3550Driver(adv_dvc); |
10863 | } else if (adv_dvc->chip_type == ADV_CHIP_ASC38C0800) { | |
b352f923 | 10864 | ASC_DBG(2, "AdvInitAsc38C0800Driver()\n"); |
9d0e96eb | 10865 | warn_code = AdvInitAsc38C0800Driver(adv_dvc); |
b2c16f58 | 10866 | } else { |
b352f923 | 10867 | ASC_DBG(2, "AdvInitAsc38C1600Driver()\n"); |
9d0e96eb | 10868 | warn_code = AdvInitAsc38C1600Driver(adv_dvc); |
b2c16f58 | 10869 | } |
9d0e96eb | 10870 | err_code = adv_dvc->err_code; |
b2c16f58 MW |
10871 | |
10872 | if (warn_code || err_code) { | |
9d0e96eb MW |
10873 | shost_printk(KERN_WARNING, shost, "error: warn 0x%x, error " |
10874 | "0x%x\n", warn_code, err_code); | |
b2c16f58 MW |
10875 | } |
10876 | ||
10877 | goto exit; | |
10878 | ||
10879 | kmalloc_failed: | |
9d0e96eb | 10880 | shost_printk(KERN_ERR, shost, "error: kmalloc() failed\n"); |
b2c16f58 MW |
10881 | err_code = ADV_ERROR; |
10882 | exit: | |
10883 | return err_code; | |
10884 | } | |
10885 | ||
98d41c29 | 10886 | static void advansys_wide_free_mem(struct asc_board *board) |
b2c16f58 | 10887 | { |
98d41c29 | 10888 | struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; |
98b96a7d HR |
10889 | |
10890 | if (adv_dvc->carrier) { | |
10891 | dma_free_coherent(board->dev, ADV_CARRIER_BUFSIZE, | |
10892 | adv_dvc->carrier, adv_dvc->carrier_addr); | |
10893 | adv_dvc->carrier = NULL; | |
10894 | } | |
4b47e464 HR |
10895 | if (board->adv_reqp) { |
10896 | dma_free_coherent(board->dev, board->adv_reqp_size, | |
10897 | board->adv_reqp, board->adv_reqp_addr); | |
10898 | board->adv_reqp = NULL; | |
10899 | } | |
0ce53822 HR |
10900 | if (board->adv_sgblk_pool) { |
10901 | dma_pool_destroy(board->adv_sgblk_pool); | |
10902 | board->adv_sgblk_pool = NULL; | |
b2c16f58 MW |
10903 | } |
10904 | } | |
10905 | ||
6f039790 GKH |
10906 | static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop, |
10907 | int bus_type) | |
27c868c2 | 10908 | { |
d361db48 | 10909 | struct pci_dev *pdev; |
d2411495 | 10910 | struct asc_board *boardp = shost_priv(shost); |
27c868c2 MW |
10911 | ASC_DVC_VAR *asc_dvc_varp = NULL; |
10912 | ADV_DVC_VAR *adv_dvc_varp = NULL; | |
d361db48 | 10913 | int share_irq, warn_code, ret; |
27c868c2 | 10914 | |
d361db48 | 10915 | pdev = (bus_type == ASC_IS_PCI) ? to_pci_dev(boardp->dev) : NULL; |
27c868c2 MW |
10916 | |
10917 | if (ASC_NARROW_BOARD(boardp)) { | |
b352f923 | 10918 | ASC_DBG(1, "narrow board\n"); |
27c868c2 MW |
10919 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
10920 | asc_dvc_varp->bus_type = bus_type; | |
10921 | asc_dvc_varp->drv_ptr = boardp; | |
10922 | asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg; | |
27c868c2 | 10923 | asc_dvc_varp->iop_base = iop; |
27c868c2 | 10924 | } else { |
57ba5fe9 | 10925 | #ifdef CONFIG_PCI |
27c868c2 MW |
10926 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
10927 | adv_dvc_varp->drv_ptr = boardp; | |
10928 | adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg; | |
27c868c2 | 10929 | if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW) { |
b352f923 | 10930 | ASC_DBG(1, "wide board ASC-3550\n"); |
27c868c2 MW |
10931 | adv_dvc_varp->chip_type = ADV_CHIP_ASC3550; |
10932 | } else if (pdev->device == PCI_DEVICE_ID_38C0800_REV1) { | |
b352f923 | 10933 | ASC_DBG(1, "wide board ASC-38C0800\n"); |
27c868c2 MW |
10934 | adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800; |
10935 | } else { | |
b352f923 | 10936 | ASC_DBG(1, "wide board ASC-38C1600\n"); |
27c868c2 MW |
10937 | adv_dvc_varp->chip_type = ADV_CHIP_ASC38C1600; |
10938 | } | |
27c868c2 | 10939 | |
57ba5fe9 | 10940 | boardp->asc_n_io_port = pci_resource_len(pdev, 1); |
25729a7f | 10941 | boardp->ioremap_addr = pci_ioremap_bar(pdev, 1); |
57ba5fe9 | 10942 | if (!boardp->ioremap_addr) { |
9d511a4b | 10943 | shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) " |
9d0e96eb | 10944 | "returned NULL\n", |
9d511a4b | 10945 | (long)pci_resource_start(pdev, 1), |
9d0e96eb | 10946 | boardp->asc_n_io_port); |
d361db48 | 10947 | ret = -ENODEV; |
b2c16f58 | 10948 | goto err_shost; |
27c868c2 | 10949 | } |
b352f923 MW |
10950 | adv_dvc_varp->iop_base = (AdvPortAddr)boardp->ioremap_addr; |
10951 | ASC_DBG(1, "iop_base: 0x%p\n", adv_dvc_varp->iop_base); | |
27c868c2 MW |
10952 | |
10953 | /* | |
10954 | * Even though it isn't used to access wide boards, other | |
10955 | * than for the debug line below, save I/O Port address so | |
10956 | * that it can be reported. | |
10957 | */ | |
10958 | boardp->ioport = iop; | |
10959 | ||
b352f923 MW |
10960 | ASC_DBG(1, "iopb_chip_id_1 0x%x, iopw_chip_id_0 0x%x\n", |
10961 | (ushort)inp(iop + 1), (ushort)inpw(iop)); | |
57ba5fe9 | 10962 | #endif /* CONFIG_PCI */ |
27c868c2 MW |
10963 | } |
10964 | ||
27c868c2 | 10965 | if (ASC_NARROW_BOARD(boardp)) { |
27c868c2 MW |
10966 | /* |
10967 | * Set the board bus type and PCI IRQ before | |
10968 | * calling AscInitGetConfig(). | |
10969 | */ | |
10970 | switch (asc_dvc_varp->bus_type) { | |
10971 | #ifdef CONFIG_ISA | |
10972 | case ASC_IS_ISA: | |
ae26759e | 10973 | shost->unchecked_isa_dma = true; |
074c8fe4 | 10974 | share_irq = 0; |
27c868c2 MW |
10975 | break; |
10976 | case ASC_IS_VL: | |
ae26759e | 10977 | shost->unchecked_isa_dma = false; |
074c8fe4 | 10978 | share_irq = 0; |
27c868c2 MW |
10979 | break; |
10980 | case ASC_IS_EISA: | |
ae26759e | 10981 | shost->unchecked_isa_dma = false; |
074c8fe4 | 10982 | share_irq = IRQF_SHARED; |
27c868c2 MW |
10983 | break; |
10984 | #endif /* CONFIG_ISA */ | |
10985 | #ifdef CONFIG_PCI | |
10986 | case ASC_IS_PCI: | |
ae26759e | 10987 | shost->unchecked_isa_dma = false; |
074c8fe4 | 10988 | share_irq = IRQF_SHARED; |
27c868c2 MW |
10989 | break; |
10990 | #endif /* CONFIG_PCI */ | |
10991 | default: | |
9d0e96eb MW |
10992 | shost_printk(KERN_ERR, shost, "unknown adapter type: " |
10993 | "%d\n", asc_dvc_varp->bus_type); | |
ae26759e | 10994 | shost->unchecked_isa_dma = false; |
074c8fe4 | 10995 | share_irq = 0; |
27c868c2 MW |
10996 | break; |
10997 | } | |
27c868c2 | 10998 | |
27c868c2 MW |
10999 | /* |
11000 | * NOTE: AscInitGetConfig() may change the board's | |
11001 | * bus_type value. The bus_type value should no | |
11002 | * longer be used. If the bus_type field must be | |
11003 | * referenced only use the bit-wise AND operator "&". | |
11004 | */ | |
b352f923 | 11005 | ASC_DBG(2, "AscInitGetConfig()\n"); |
9d0e96eb | 11006 | ret = AscInitGetConfig(shost) ? -ENODEV : 0; |
27c868c2 | 11007 | } else { |
c2dce2fa MW |
11008 | #ifdef CONFIG_PCI |
11009 | /* | |
11010 | * For Wide boards set PCI information before calling | |
11011 | * AdvInitGetConfig(). | |
11012 | */ | |
ae26759e | 11013 | shost->unchecked_isa_dma = false; |
c2dce2fa | 11014 | share_irq = IRQF_SHARED; |
b352f923 | 11015 | ASC_DBG(2, "AdvInitGetConfig()\n"); |
394dbf3f | 11016 | |
9d0e96eb | 11017 | ret = AdvInitGetConfig(pdev, shost) ? -ENODEV : 0; |
f46e7cd3 AB |
11018 | #else |
11019 | share_irq = 0; | |
11020 | ret = -ENODEV; | |
c2dce2fa | 11021 | #endif /* CONFIG_PCI */ |
27c868c2 MW |
11022 | } |
11023 | ||
d361db48 | 11024 | if (ret) |
b59fb6fd | 11025 | goto err_unmap; |
27c868c2 MW |
11026 | |
11027 | /* | |
11028 | * Save the EEPROM configuration so that it can be displayed | |
11029 | * from /proc/scsi/advansys/[0...]. | |
11030 | */ | |
11031 | if (ASC_NARROW_BOARD(boardp)) { | |
11032 | ||
11033 | ASCEEP_CONFIG *ep; | |
11034 | ||
11035 | /* | |
11036 | * Set the adapter's target id bit in the 'init_tidmask' field. | |
11037 | */ | |
11038 | boardp->init_tidmask |= | |
11039 | ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id); | |
11040 | ||
11041 | /* | |
11042 | * Save EEPROM settings for the board. | |
11043 | */ | |
11044 | ep = &boardp->eep_config.asc_eep; | |
11045 | ||
11046 | ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable; | |
11047 | ep->disc_enable = asc_dvc_varp->cfg->disc_enable; | |
11048 | ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled; | |
11049 | ASC_EEP_SET_DMA_SPD(ep, asc_dvc_varp->cfg->isa_dma_speed); | |
11050 | ep->start_motor = asc_dvc_varp->start_motor; | |
11051 | ep->cntl = asc_dvc_varp->dvc_cntl; | |
11052 | ep->no_scam = asc_dvc_varp->no_scam; | |
11053 | ep->max_total_qng = asc_dvc_varp->max_total_qng; | |
11054 | ASC_EEP_SET_CHIP_ID(ep, asc_dvc_varp->cfg->chip_scsi_id); | |
11055 | /* 'max_tag_qng' is set to the same value for every device. */ | |
11056 | ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0]; | |
11057 | ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0]; | |
11058 | ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1]; | |
11059 | ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2]; | |
11060 | ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3]; | |
11061 | ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4]; | |
11062 | ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5]; | |
11063 | ||
11064 | /* | |
11065 | * Modify board configuration. | |
11066 | */ | |
b352f923 | 11067 | ASC_DBG(2, "AscInitSetConfig()\n"); |
9d0e96eb | 11068 | ret = AscInitSetConfig(pdev, shost) ? -ENODEV : 0; |
d361db48 | 11069 | if (ret) |
b59fb6fd | 11070 | goto err_unmap; |
27c868c2 MW |
11071 | } else { |
11072 | ADVEEP_3550_CONFIG *ep_3550; | |
11073 | ADVEEP_38C0800_CONFIG *ep_38C0800; | |
11074 | ADVEEP_38C1600_CONFIG *ep_38C1600; | |
11075 | ||
11076 | /* | |
11077 | * Save Wide EEP Configuration Information. | |
11078 | */ | |
11079 | if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { | |
11080 | ep_3550 = &boardp->eep_config.adv_3550_eep; | |
11081 | ||
11082 | ep_3550->adapter_scsi_id = adv_dvc_varp->chip_scsi_id; | |
11083 | ep_3550->max_host_qng = adv_dvc_varp->max_host_qng; | |
11084 | ep_3550->max_dvc_qng = adv_dvc_varp->max_dvc_qng; | |
11085 | ep_3550->termination = adv_dvc_varp->cfg->termination; | |
11086 | ep_3550->disc_enable = adv_dvc_varp->cfg->disc_enable; | |
11087 | ep_3550->bios_ctrl = adv_dvc_varp->bios_ctrl; | |
11088 | ep_3550->wdtr_able = adv_dvc_varp->wdtr_able; | |
11089 | ep_3550->sdtr_able = adv_dvc_varp->sdtr_able; | |
11090 | ep_3550->ultra_able = adv_dvc_varp->ultra_able; | |
11091 | ep_3550->tagqng_able = adv_dvc_varp->tagqng_able; | |
11092 | ep_3550->start_motor = adv_dvc_varp->start_motor; | |
11093 | ep_3550->scsi_reset_delay = | |
11094 | adv_dvc_varp->scsi_reset_wait; | |
11095 | ep_3550->serial_number_word1 = | |
11096 | adv_dvc_varp->cfg->serial1; | |
11097 | ep_3550->serial_number_word2 = | |
11098 | adv_dvc_varp->cfg->serial2; | |
11099 | ep_3550->serial_number_word3 = | |
11100 | adv_dvc_varp->cfg->serial3; | |
11101 | } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { | |
11102 | ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; | |
11103 | ||
11104 | ep_38C0800->adapter_scsi_id = | |
11105 | adv_dvc_varp->chip_scsi_id; | |
11106 | ep_38C0800->max_host_qng = adv_dvc_varp->max_host_qng; | |
11107 | ep_38C0800->max_dvc_qng = adv_dvc_varp->max_dvc_qng; | |
11108 | ep_38C0800->termination_lvd = | |
11109 | adv_dvc_varp->cfg->termination; | |
11110 | ep_38C0800->disc_enable = | |
11111 | adv_dvc_varp->cfg->disc_enable; | |
11112 | ep_38C0800->bios_ctrl = adv_dvc_varp->bios_ctrl; | |
11113 | ep_38C0800->wdtr_able = adv_dvc_varp->wdtr_able; | |
11114 | ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; | |
11115 | ep_38C0800->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; | |
11116 | ep_38C0800->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; | |
11117 | ep_38C0800->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; | |
11118 | ep_38C0800->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; | |
11119 | ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; | |
11120 | ep_38C0800->start_motor = adv_dvc_varp->start_motor; | |
11121 | ep_38C0800->scsi_reset_delay = | |
11122 | adv_dvc_varp->scsi_reset_wait; | |
11123 | ep_38C0800->serial_number_word1 = | |
11124 | adv_dvc_varp->cfg->serial1; | |
11125 | ep_38C0800->serial_number_word2 = | |
11126 | adv_dvc_varp->cfg->serial2; | |
11127 | ep_38C0800->serial_number_word3 = | |
11128 | adv_dvc_varp->cfg->serial3; | |
11129 | } else { | |
11130 | ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; | |
11131 | ||
11132 | ep_38C1600->adapter_scsi_id = | |
11133 | adv_dvc_varp->chip_scsi_id; | |
11134 | ep_38C1600->max_host_qng = adv_dvc_varp->max_host_qng; | |
11135 | ep_38C1600->max_dvc_qng = adv_dvc_varp->max_dvc_qng; | |
11136 | ep_38C1600->termination_lvd = | |
11137 | adv_dvc_varp->cfg->termination; | |
11138 | ep_38C1600->disc_enable = | |
11139 | adv_dvc_varp->cfg->disc_enable; | |
11140 | ep_38C1600->bios_ctrl = adv_dvc_varp->bios_ctrl; | |
11141 | ep_38C1600->wdtr_able = adv_dvc_varp->wdtr_able; | |
11142 | ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; | |
11143 | ep_38C1600->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; | |
11144 | ep_38C1600->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; | |
11145 | ep_38C1600->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; | |
11146 | ep_38C1600->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; | |
11147 | ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; | |
11148 | ep_38C1600->start_motor = adv_dvc_varp->start_motor; | |
11149 | ep_38C1600->scsi_reset_delay = | |
11150 | adv_dvc_varp->scsi_reset_wait; | |
11151 | ep_38C1600->serial_number_word1 = | |
11152 | adv_dvc_varp->cfg->serial1; | |
11153 | ep_38C1600->serial_number_word2 = | |
11154 | adv_dvc_varp->cfg->serial2; | |
11155 | ep_38C1600->serial_number_word3 = | |
11156 | adv_dvc_varp->cfg->serial3; | |
11157 | } | |
11158 | ||
11159 | /* | |
11160 | * Set the adapter's target id bit in the 'init_tidmask' field. | |
11161 | */ | |
11162 | boardp->init_tidmask |= | |
11163 | ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id); | |
27c868c2 MW |
11164 | } |
11165 | ||
11166 | /* | |
11167 | * Channels are numbered beginning with 0. For AdvanSys one host | |
11168 | * structure supports one channel. Multi-channel boards have a | |
11169 | * separate host structure for each channel. | |
11170 | */ | |
11171 | shost->max_channel = 0; | |
11172 | if (ASC_NARROW_BOARD(boardp)) { | |
11173 | shost->max_id = ASC_MAX_TID + 1; | |
11174 | shost->max_lun = ASC_MAX_LUN + 1; | |
f05ec594 | 11175 | shost->max_cmd_len = ASC_MAX_CDB_LEN; |
27c868c2 MW |
11176 | |
11177 | shost->io_port = asc_dvc_varp->iop_base; | |
11178 | boardp->asc_n_io_port = ASC_IOADR_GAP; | |
11179 | shost->this_id = asc_dvc_varp->cfg->chip_scsi_id; | |
11180 | ||
11181 | /* Set maximum number of queues the adapter can handle. */ | |
11182 | shost->can_queue = asc_dvc_varp->max_total_qng; | |
11183 | } else { | |
11184 | shost->max_id = ADV_MAX_TID + 1; | |
11185 | shost->max_lun = ADV_MAX_LUN + 1; | |
f05ec594 | 11186 | shost->max_cmd_len = ADV_MAX_CDB_LEN; |
27c868c2 MW |
11187 | |
11188 | /* | |
11189 | * Save the I/O Port address and length even though | |
11190 | * I/O ports are not used to access Wide boards. | |
11191 | * Instead the Wide boards are accessed with | |
11192 | * PCI Memory Mapped I/O. | |
11193 | */ | |
11194 | shost->io_port = iop; | |
27c868c2 MW |
11195 | |
11196 | shost->this_id = adv_dvc_varp->chip_scsi_id; | |
11197 | ||
11198 | /* Set maximum number of queues the adapter can handle. */ | |
11199 | shost->can_queue = adv_dvc_varp->max_host_qng; | |
11200 | } | |
11201 | ||
27c868c2 MW |
11202 | /* |
11203 | * Set the maximum number of scatter-gather elements the | |
11204 | * adapter can handle. | |
11205 | */ | |
11206 | if (ASC_NARROW_BOARD(boardp)) { | |
11207 | /* | |
11208 | * Allow two commands with 'sg_tablesize' scatter-gather | |
11209 | * elements to be executed simultaneously. This value is | |
11210 | * the theoretical hardware limit. It may be decreased | |
11211 | * below. | |
11212 | */ | |
11213 | shost->sg_tablesize = | |
11214 | (((asc_dvc_varp->max_total_qng - 2) / 2) * | |
11215 | ASC_SG_LIST_PER_Q) + 1; | |
11216 | } else { | |
11217 | shost->sg_tablesize = ADV_MAX_SG_LIST; | |
11218 | } | |
11219 | ||
11220 | /* | |
11221 | * The value of 'sg_tablesize' can not exceed the SCSI | |
11222 | * mid-level driver definition of SG_ALL. SG_ALL also | |
11223 | * must not be exceeded, because it is used to define the | |
11224 | * size of the scatter-gather table in 'struct asc_sg_head'. | |
11225 | */ | |
11226 | if (shost->sg_tablesize > SG_ALL) { | |
11227 | shost->sg_tablesize = SG_ALL; | |
11228 | } | |
11229 | ||
b352f923 | 11230 | ASC_DBG(1, "sg_tablesize: %d\n", shost->sg_tablesize); |
27c868c2 MW |
11231 | |
11232 | /* BIOS start address. */ | |
11233 | if (ASC_NARROW_BOARD(boardp)) { | |
b2c16f58 MW |
11234 | shost->base = AscGetChipBiosAddress(asc_dvc_varp->iop_base, |
11235 | asc_dvc_varp->bus_type); | |
27c868c2 MW |
11236 | } else { |
11237 | /* | |
11238 | * Fill-in BIOS board variables. The Wide BIOS saves | |
11239 | * information in LRAM that is used by the driver. | |
11240 | */ | |
11241 | AdvReadWordLram(adv_dvc_varp->iop_base, | |
11242 | BIOS_SIGNATURE, boardp->bios_signature); | |
11243 | AdvReadWordLram(adv_dvc_varp->iop_base, | |
11244 | BIOS_VERSION, boardp->bios_version); | |
11245 | AdvReadWordLram(adv_dvc_varp->iop_base, | |
11246 | BIOS_CODESEG, boardp->bios_codeseg); | |
11247 | AdvReadWordLram(adv_dvc_varp->iop_base, | |
11248 | BIOS_CODELEN, boardp->bios_codelen); | |
11249 | ||
b352f923 | 11250 | ASC_DBG(1, "bios_signature 0x%x, bios_version 0x%x\n", |
27c868c2 MW |
11251 | boardp->bios_signature, boardp->bios_version); |
11252 | ||
b352f923 | 11253 | ASC_DBG(1, "bios_codeseg 0x%x, bios_codelen 0x%x\n", |
27c868c2 MW |
11254 | boardp->bios_codeseg, boardp->bios_codelen); |
11255 | ||
11256 | /* | |
11257 | * If the BIOS saved a valid signature, then fill in | |
11258 | * the BIOS code segment base address. | |
11259 | */ | |
11260 | if (boardp->bios_signature == 0x55AA) { | |
11261 | /* | |
11262 | * Convert x86 realmode code segment to a linear | |
11263 | * address by shifting left 4. | |
11264 | */ | |
11265 | shost->base = ((ulong)boardp->bios_codeseg << 4); | |
11266 | } else { | |
11267 | shost->base = 0; | |
11268 | } | |
11269 | } | |
11270 | ||
11271 | /* | |
11272 | * Register Board Resources - I/O Port, DMA, IRQ | |
11273 | */ | |
11274 | ||
27c868c2 MW |
11275 | /* Register DMA Channel for Narrow boards. */ |
11276 | shost->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */ | |
11277 | #ifdef CONFIG_ISA | |
11278 | if (ASC_NARROW_BOARD(boardp)) { | |
11279 | /* Register DMA channel for ISA bus. */ | |
11280 | if (asc_dvc_varp->bus_type & ASC_IS_ISA) { | |
11281 | shost->dma_channel = asc_dvc_varp->cfg->isa_dma_channel; | |
01fbfe0b | 11282 | ret = request_dma(shost->dma_channel, DRV_NAME); |
b2c16f58 | 11283 | if (ret) { |
9d0e96eb MW |
11284 | shost_printk(KERN_ERR, shost, "request_dma() " |
11285 | "%d failed %d\n", | |
11286 | shost->dma_channel, ret); | |
b59fb6fd | 11287 | goto err_unmap; |
27c868c2 MW |
11288 | } |
11289 | AscEnableIsaDma(shost->dma_channel); | |
11290 | } | |
11291 | } | |
11292 | #endif /* CONFIG_ISA */ | |
11293 | ||
11294 | /* Register IRQ Number. */ | |
b352f923 | 11295 | ASC_DBG(2, "request_irq(%d, %p)\n", boardp->irq, shost); |
074c8fe4 | 11296 | |
d361db48 | 11297 | ret = request_irq(boardp->irq, advansys_interrupt, share_irq, |
01fbfe0b | 11298 | DRV_NAME, shost); |
074c8fe4 MW |
11299 | |
11300 | if (ret) { | |
27c868c2 | 11301 | if (ret == -EBUSY) { |
9d0e96eb MW |
11302 | shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " |
11303 | "already in use\n", boardp->irq); | |
27c868c2 | 11304 | } else if (ret == -EINVAL) { |
9d0e96eb MW |
11305 | shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " |
11306 | "not valid\n", boardp->irq); | |
27c868c2 | 11307 | } else { |
9d0e96eb MW |
11308 | shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " |
11309 | "failed with %d\n", boardp->irq, ret); | |
27c868c2 | 11310 | } |
b2c16f58 | 11311 | goto err_free_dma; |
27c868c2 MW |
11312 | } |
11313 | ||
11314 | /* | |
11315 | * Initialize board RISC chip and enable interrupts. | |
11316 | */ | |
11317 | if (ASC_NARROW_BOARD(boardp)) { | |
b352f923 | 11318 | ASC_DBG(2, "AscInitAsc1000Driver()\n"); |
7d5d408c FT |
11319 | |
11320 | asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL); | |
11321 | if (!asc_dvc_varp->overrun_buf) { | |
11322 | ret = -ENOMEM; | |
9a908c1a | 11323 | goto err_free_irq; |
7d5d408c | 11324 | } |
27c868c2 | 11325 | warn_code = AscInitAsc1000Driver(asc_dvc_varp); |
27c868c2 | 11326 | |
d361db48 | 11327 | if (warn_code || asc_dvc_varp->err_code) { |
9d0e96eb MW |
11328 | shost_printk(KERN_ERR, shost, "error: init_state 0x%x, " |
11329 | "warn 0x%x, error 0x%x\n", | |
11330 | asc_dvc_varp->init_state, warn_code, | |
11331 | asc_dvc_varp->err_code); | |
9a908c1a | 11332 | if (!asc_dvc_varp->overrun_dma) { |
d361db48 | 11333 | ret = -ENODEV; |
9a908c1a | 11334 | goto err_free_mem; |
7d5d408c | 11335 | } |
27c868c2 MW |
11336 | } |
11337 | } else { | |
9a908c1a | 11338 | if (advansys_wide_init_chip(shost)) { |
d361db48 | 11339 | ret = -ENODEV; |
9a908c1a HRK |
11340 | goto err_free_mem; |
11341 | } | |
27c868c2 MW |
11342 | } |
11343 | ||
27c868c2 MW |
11344 | ASC_DBG_PRT_SCSI_HOST(2, shost); |
11345 | ||
d361db48 | 11346 | ret = scsi_add_host(shost, boardp->dev); |
8dfb5379 | 11347 | if (ret) |
9a908c1a | 11348 | goto err_free_mem; |
8dfb5379 MW |
11349 | |
11350 | scsi_scan_host(shost); | |
d361db48 | 11351 | return 0; |
b2c16f58 | 11352 | |
9a908c1a HRK |
11353 | err_free_mem: |
11354 | if (ASC_NARROW_BOARD(boardp)) { | |
11355 | if (asc_dvc_varp->overrun_dma) | |
11356 | dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma, | |
11357 | ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); | |
11358 | kfree(asc_dvc_varp->overrun_buf); | |
11359 | } else | |
11360 | advansys_wide_free_mem(boardp); | |
11361 | err_free_irq: | |
d361db48 | 11362 | free_irq(boardp->irq, shost); |
b2c16f58 | 11363 | err_free_dma: |
30037818 | 11364 | #ifdef CONFIG_ISA |
b2c16f58 MW |
11365 | if (shost->dma_channel != NO_ISA_DMA) |
11366 | free_dma(shost->dma_channel); | |
30037818 | 11367 | #endif |
b2c16f58 MW |
11368 | err_unmap: |
11369 | if (boardp->ioremap_addr) | |
11370 | iounmap(boardp->ioremap_addr); | |
8810eac8 | 11371 | #ifdef CONFIG_PCI |
b2c16f58 | 11372 | err_shost: |
8810eac8 | 11373 | #endif |
d361db48 | 11374 | return ret; |
27c868c2 MW |
11375 | } |
11376 | ||
27c868c2 MW |
11377 | /* |
11378 | * advansys_release() | |
11379 | * | |
11380 | * Release resources allocated for a single AdvanSys adapter. | |
11381 | */ | |
11382 | static int advansys_release(struct Scsi_Host *shost) | |
11383 | { | |
d10fb2c7 | 11384 | struct asc_board *board = shost_priv(shost); |
b352f923 | 11385 | ASC_DBG(1, "begin\n"); |
8dfb5379 | 11386 | scsi_remove_host(shost); |
d10fb2c7 | 11387 | free_irq(board->irq, shost); |
30037818 | 11388 | #ifdef CONFIG_ISA |
27c868c2 | 11389 | if (shost->dma_channel != NO_ISA_DMA) { |
b352f923 | 11390 | ASC_DBG(1, "free_dma()\n"); |
27c868c2 MW |
11391 | free_dma(shost->dma_channel); |
11392 | } | |
30037818 | 11393 | #endif |
d10fb2c7 MW |
11394 | if (ASC_NARROW_BOARD(board)) { |
11395 | dma_unmap_single(board->dev, | |
11396 | board->dvc_var.asc_dvc_var.overrun_dma, | |
11397 | ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); | |
7d5d408c | 11398 | kfree(board->dvc_var.asc_dvc_var.overrun_buf); |
d10fb2c7 MW |
11399 | } else { |
11400 | iounmap(board->ioremap_addr); | |
11401 | advansys_wide_free_mem(board); | |
27c868c2 | 11402 | } |
8dfb5379 | 11403 | scsi_host_put(shost); |
b352f923 | 11404 | ASC_DBG(1, "end\n"); |
27c868c2 MW |
11405 | return 0; |
11406 | } | |
11407 | ||
95c9f162 MW |
11408 | #define ASC_IOADR_TABLE_MAX_IX 11 |
11409 | ||
747d016e | 11410 | static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] = { |
c304ec94 MW |
11411 | 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190, |
11412 | 0x0210, 0x0230, 0x0250, 0x0330 | |
11413 | }; | |
11414 | ||
d361db48 MW |
11415 | /* |
11416 | * The ISA IRQ number is found in bits 2 and 3 of the CfgLsw. It decodes as: | |
11417 | * 00: 10 | |
11418 | * 01: 11 | |
11419 | * 10: 12 | |
11420 | * 11: 15 | |
11421 | */ | |
6f039790 | 11422 | static unsigned int advansys_isa_irq_no(PortAddr iop_base) |
d361db48 MW |
11423 | { |
11424 | unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); | |
11425 | unsigned int chip_irq = ((cfg_lsw >> 2) & 0x03) + 10; | |
11426 | if (chip_irq == 13) | |
11427 | chip_irq = 15; | |
11428 | return chip_irq; | |
11429 | } | |
11430 | ||
6f039790 | 11431 | static int advansys_isa_probe(struct device *dev, unsigned int id) |
c304ec94 | 11432 | { |
d361db48 | 11433 | int err = -ENODEV; |
c304ec94 MW |
11434 | PortAddr iop_base = _asc_def_iop_base[id]; |
11435 | struct Scsi_Host *shost; | |
d361db48 | 11436 | struct asc_board *board; |
c304ec94 | 11437 | |
01fbfe0b | 11438 | if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { |
b352f923 | 11439 | ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); |
c304ec94 MW |
11440 | return -ENODEV; |
11441 | } | |
b352f923 | 11442 | ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); |
c304ec94 | 11443 | if (!AscFindSignature(iop_base)) |
d361db48 | 11444 | goto release_region; |
c304ec94 | 11445 | if (!(AscGetChipVersion(iop_base, ASC_IS_ISA) & ASC_CHIP_VER_ISA_BIT)) |
d361db48 | 11446 | goto release_region; |
c304ec94 | 11447 | |
d361db48 MW |
11448 | err = -ENOMEM; |
11449 | shost = scsi_host_alloc(&advansys_template, sizeof(*board)); | |
c304ec94 | 11450 | if (!shost) |
d361db48 MW |
11451 | goto release_region; |
11452 | ||
d2411495 | 11453 | board = shost_priv(shost); |
d361db48 MW |
11454 | board->irq = advansys_isa_irq_no(iop_base); |
11455 | board->dev = dev; | |
9c17c62a | 11456 | board->shost = shost; |
d361db48 MW |
11457 | |
11458 | err = advansys_board_found(shost, iop_base, ASC_IS_ISA); | |
11459 | if (err) | |
11460 | goto free_host; | |
c304ec94 MW |
11461 | |
11462 | dev_set_drvdata(dev, shost); | |
11463 | return 0; | |
11464 | ||
d361db48 MW |
11465 | free_host: |
11466 | scsi_host_put(shost); | |
11467 | release_region: | |
71f36115 | 11468 | release_region(iop_base, ASC_IOADR_GAP); |
d361db48 | 11469 | return err; |
c304ec94 MW |
11470 | } |
11471 | ||
6f039790 | 11472 | static int advansys_isa_remove(struct device *dev, unsigned int id) |
c304ec94 | 11473 | { |
71f36115 | 11474 | int ioport = _asc_def_iop_base[id]; |
c304ec94 | 11475 | advansys_release(dev_get_drvdata(dev)); |
71f36115 | 11476 | release_region(ioport, ASC_IOADR_GAP); |
c304ec94 MW |
11477 | return 0; |
11478 | } | |
11479 | ||
11480 | static struct isa_driver advansys_isa_driver = { | |
11481 | .probe = advansys_isa_probe, | |
6f039790 | 11482 | .remove = advansys_isa_remove, |
c304ec94 MW |
11483 | .driver = { |
11484 | .owner = THIS_MODULE, | |
01fbfe0b | 11485 | .name = DRV_NAME, |
c304ec94 MW |
11486 | }, |
11487 | }; | |
11488 | ||
d361db48 MW |
11489 | /* |
11490 | * The VLB IRQ number is found in bits 2 to 4 of the CfgLsw. It decodes as: | |
11491 | * 000: invalid | |
11492 | * 001: 10 | |
11493 | * 010: 11 | |
11494 | * 011: 12 | |
11495 | * 100: invalid | |
11496 | * 101: 14 | |
11497 | * 110: 15 | |
11498 | * 111: invalid | |
11499 | */ | |
6f039790 | 11500 | static unsigned int advansys_vlb_irq_no(PortAddr iop_base) |
d361db48 MW |
11501 | { |
11502 | unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); | |
11503 | unsigned int chip_irq = ((cfg_lsw >> 2) & 0x07) + 9; | |
11504 | if ((chip_irq < 10) || (chip_irq == 13) || (chip_irq > 15)) | |
11505 | return 0; | |
11506 | return chip_irq; | |
11507 | } | |
11508 | ||
6f039790 | 11509 | static int advansys_vlb_probe(struct device *dev, unsigned int id) |
c304ec94 | 11510 | { |
d361db48 | 11511 | int err = -ENODEV; |
c304ec94 MW |
11512 | PortAddr iop_base = _asc_def_iop_base[id]; |
11513 | struct Scsi_Host *shost; | |
d361db48 | 11514 | struct asc_board *board; |
c304ec94 | 11515 | |
01fbfe0b | 11516 | if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { |
b352f923 | 11517 | ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); |
c304ec94 MW |
11518 | return -ENODEV; |
11519 | } | |
b352f923 | 11520 | ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); |
c304ec94 | 11521 | if (!AscFindSignature(iop_base)) |
d361db48 | 11522 | goto release_region; |
c304ec94 MW |
11523 | /* |
11524 | * I don't think this condition can actually happen, but the old | |
11525 | * driver did it, and the chances of finding a VLB setup in 2007 | |
11526 | * to do testing with is slight to none. | |
11527 | */ | |
11528 | if (AscGetChipVersion(iop_base, ASC_IS_VL) > ASC_CHIP_MAX_VER_VL) | |
d361db48 | 11529 | goto release_region; |
c304ec94 | 11530 | |
d361db48 MW |
11531 | err = -ENOMEM; |
11532 | shost = scsi_host_alloc(&advansys_template, sizeof(*board)); | |
c304ec94 | 11533 | if (!shost) |
d361db48 MW |
11534 | goto release_region; |
11535 | ||
d2411495 | 11536 | board = shost_priv(shost); |
d361db48 MW |
11537 | board->irq = advansys_vlb_irq_no(iop_base); |
11538 | board->dev = dev; | |
9c17c62a | 11539 | board->shost = shost; |
d361db48 MW |
11540 | |
11541 | err = advansys_board_found(shost, iop_base, ASC_IS_VL); | |
11542 | if (err) | |
11543 | goto free_host; | |
c304ec94 MW |
11544 | |
11545 | dev_set_drvdata(dev, shost); | |
11546 | return 0; | |
11547 | ||
d361db48 MW |
11548 | free_host: |
11549 | scsi_host_put(shost); | |
11550 | release_region: | |
71f36115 | 11551 | release_region(iop_base, ASC_IOADR_GAP); |
c304ec94 MW |
11552 | return -ENODEV; |
11553 | } | |
11554 | ||
11555 | static struct isa_driver advansys_vlb_driver = { | |
11556 | .probe = advansys_vlb_probe, | |
6f039790 | 11557 | .remove = advansys_isa_remove, |
c304ec94 MW |
11558 | .driver = { |
11559 | .owner = THIS_MODULE, | |
b8e5152b | 11560 | .name = "advansys_vlb", |
c304ec94 MW |
11561 | }, |
11562 | }; | |
11563 | ||
6f039790 | 11564 | static struct eisa_device_id advansys_eisa_table[] = { |
b09e05a7 MW |
11565 | { "ABP7401" }, |
11566 | { "ABP7501" }, | |
11567 | { "" } | |
11568 | }; | |
11569 | ||
11570 | MODULE_DEVICE_TABLE(eisa, advansys_eisa_table); | |
11571 | ||
11572 | /* | |
11573 | * EISA is a little more tricky than PCI; each EISA device may have two | |
11574 | * channels, and this driver is written to make each channel its own Scsi_Host | |
11575 | */ | |
11576 | struct eisa_scsi_data { | |
11577 | struct Scsi_Host *host[2]; | |
11578 | }; | |
11579 | ||
d361db48 MW |
11580 | /* |
11581 | * The EISA IRQ number is found in bits 8 to 10 of the CfgLsw. It decodes as: | |
11582 | * 000: 10 | |
11583 | * 001: 11 | |
11584 | * 010: 12 | |
11585 | * 011: invalid | |
11586 | * 100: 14 | |
11587 | * 101: 15 | |
11588 | * 110: invalid | |
11589 | * 111: invalid | |
11590 | */ | |
6f039790 | 11591 | static unsigned int advansys_eisa_irq_no(struct eisa_device *edev) |
d361db48 MW |
11592 | { |
11593 | unsigned short cfg_lsw = inw(edev->base_addr + 0xc86); | |
11594 | unsigned int chip_irq = ((cfg_lsw >> 8) & 0x07) + 10; | |
11595 | if ((chip_irq == 13) || (chip_irq > 15)) | |
11596 | return 0; | |
11597 | return chip_irq; | |
11598 | } | |
11599 | ||
6f039790 | 11600 | static int advansys_eisa_probe(struct device *dev) |
b09e05a7 | 11601 | { |
d361db48 | 11602 | int i, ioport, irq = 0; |
b09e05a7 MW |
11603 | int err; |
11604 | struct eisa_device *edev = to_eisa_device(dev); | |
11605 | struct eisa_scsi_data *data; | |
11606 | ||
11607 | err = -ENOMEM; | |
11608 | data = kzalloc(sizeof(*data), GFP_KERNEL); | |
11609 | if (!data) | |
11610 | goto fail; | |
11611 | ioport = edev->base_addr + 0xc30; | |
11612 | ||
11613 | err = -ENODEV; | |
11614 | for (i = 0; i < 2; i++, ioport += 0x20) { | |
d361db48 MW |
11615 | struct asc_board *board; |
11616 | struct Scsi_Host *shost; | |
01fbfe0b | 11617 | if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) { |
71f36115 MW |
11618 | printk(KERN_WARNING "Region %x-%x busy\n", ioport, |
11619 | ioport + ASC_IOADR_GAP - 1); | |
11620 | continue; | |
11621 | } | |
11622 | if (!AscFindSignature(ioport)) { | |
11623 | release_region(ioport, ASC_IOADR_GAP); | |
b09e05a7 | 11624 | continue; |
71f36115 MW |
11625 | } |
11626 | ||
b09e05a7 MW |
11627 | /* |
11628 | * I don't know why we need to do this for EISA chips, but | |
11629 | * not for any others. It looks to be equivalent to | |
11630 | * AscGetChipCfgMsw, but I may have overlooked something, | |
11631 | * so I'm not converting it until I get an EISA board to | |
11632 | * test with. | |
11633 | */ | |
11634 | inw(ioport + 4); | |
d361db48 MW |
11635 | |
11636 | if (!irq) | |
11637 | irq = advansys_eisa_irq_no(edev); | |
11638 | ||
11639 | err = -ENOMEM; | |
11640 | shost = scsi_host_alloc(&advansys_template, sizeof(*board)); | |
11641 | if (!shost) | |
11642 | goto release_region; | |
11643 | ||
d2411495 | 11644 | board = shost_priv(shost); |
d361db48 MW |
11645 | board->irq = irq; |
11646 | board->dev = dev; | |
9c17c62a | 11647 | board->shost = shost; |
d361db48 MW |
11648 | |
11649 | err = advansys_board_found(shost, ioport, ASC_IS_EISA); | |
11650 | if (!err) { | |
11651 | data->host[i] = shost; | |
11652 | continue; | |
71f36115 | 11653 | } |
b09e05a7 | 11654 | |
d361db48 MW |
11655 | scsi_host_put(shost); |
11656 | release_region: | |
11657 | release_region(ioport, ASC_IOADR_GAP); | |
11658 | break; | |
b09e05a7 MW |
11659 | } |
11660 | ||
d361db48 MW |
11661 | if (err) |
11662 | goto free_data; | |
11663 | dev_set_drvdata(dev, data); | |
11664 | return 0; | |
11665 | ||
11666 | free_data: | |
11667 | kfree(data->host[0]); | |
11668 | kfree(data->host[1]); | |
11669 | kfree(data); | |
b09e05a7 MW |
11670 | fail: |
11671 | return err; | |
11672 | } | |
11673 | ||
6f039790 | 11674 | static int advansys_eisa_remove(struct device *dev) |
b09e05a7 MW |
11675 | { |
11676 | int i; | |
11677 | struct eisa_scsi_data *data = dev_get_drvdata(dev); | |
11678 | ||
11679 | for (i = 0; i < 2; i++) { | |
71f36115 | 11680 | int ioport; |
b09e05a7 MW |
11681 | struct Scsi_Host *shost = data->host[i]; |
11682 | if (!shost) | |
11683 | continue; | |
71f36115 | 11684 | ioport = shost->io_port; |
b09e05a7 | 11685 | advansys_release(shost); |
71f36115 | 11686 | release_region(ioport, ASC_IOADR_GAP); |
b09e05a7 MW |
11687 | } |
11688 | ||
11689 | kfree(data); | |
11690 | return 0; | |
11691 | } | |
11692 | ||
11693 | static struct eisa_driver advansys_eisa_driver = { | |
11694 | .id_table = advansys_eisa_table, | |
11695 | .driver = { | |
01fbfe0b | 11696 | .name = DRV_NAME, |
b09e05a7 | 11697 | .probe = advansys_eisa_probe, |
6f039790 | 11698 | .remove = advansys_eisa_remove, |
b09e05a7 MW |
11699 | } |
11700 | }; | |
11701 | ||
2672ea86 | 11702 | /* PCI Devices supported by this driver */ |
6f039790 | 11703 | static struct pci_device_id advansys_pci_tbl[] = { |
27c868c2 MW |
11704 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A, |
11705 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11706 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940, | |
11707 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11708 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U, | |
11709 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11710 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW, | |
11711 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11712 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1, | |
11713 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11714 | {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1, | |
11715 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
11716 | {} | |
2672ea86 | 11717 | }; |
27c868c2 | 11718 | |
2672ea86 | 11719 | MODULE_DEVICE_TABLE(pci, advansys_pci_tbl); |
78e77d8b | 11720 | |
6f039790 | 11721 | static void advansys_set_latency(struct pci_dev *pdev) |
9649af39 MW |
11722 | { |
11723 | if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || | |
11724 | (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { | |
11725 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0); | |
11726 | } else { | |
11727 | u8 latency; | |
11728 | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); | |
11729 | if (latency < 0x20) | |
11730 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); | |
11731 | } | |
11732 | } | |
11733 | ||
6f039790 GKH |
11734 | static int advansys_pci_probe(struct pci_dev *pdev, |
11735 | const struct pci_device_id *ent) | |
78e77d8b MW |
11736 | { |
11737 | int err, ioport; | |
11738 | struct Scsi_Host *shost; | |
d361db48 | 11739 | struct asc_board *board; |
78e77d8b MW |
11740 | |
11741 | err = pci_enable_device(pdev); | |
11742 | if (err) | |
11743 | goto fail; | |
01fbfe0b | 11744 | err = pci_request_regions(pdev, DRV_NAME); |
71f36115 MW |
11745 | if (err) |
11746 | goto disable_device; | |
9649af39 MW |
11747 | pci_set_master(pdev); |
11748 | advansys_set_latency(pdev); | |
78e77d8b | 11749 | |
d361db48 | 11750 | err = -ENODEV; |
78e77d8b | 11751 | if (pci_resource_len(pdev, 0) == 0) |
d361db48 | 11752 | goto release_region; |
78e77d8b MW |
11753 | |
11754 | ioport = pci_resource_start(pdev, 0); | |
78e77d8b | 11755 | |
d361db48 MW |
11756 | err = -ENOMEM; |
11757 | shost = scsi_host_alloc(&advansys_template, sizeof(*board)); | |
78e77d8b | 11758 | if (!shost) |
d361db48 MW |
11759 | goto release_region; |
11760 | ||
d2411495 | 11761 | board = shost_priv(shost); |
d361db48 MW |
11762 | board->irq = pdev->irq; |
11763 | board->dev = &pdev->dev; | |
9c17c62a | 11764 | board->shost = shost; |
d361db48 MW |
11765 | |
11766 | if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW || | |
11767 | pdev->device == PCI_DEVICE_ID_38C0800_REV1 || | |
11768 | pdev->device == PCI_DEVICE_ID_38C1600_REV1) { | |
11769 | board->flags |= ASC_IS_WIDE_BOARD; | |
11770 | } | |
11771 | ||
11772 | err = advansys_board_found(shost, ioport, ASC_IS_PCI); | |
11773 | if (err) | |
11774 | goto free_host; | |
78e77d8b MW |
11775 | |
11776 | pci_set_drvdata(pdev, shost); | |
11777 | return 0; | |
11778 | ||
d361db48 MW |
11779 | free_host: |
11780 | scsi_host_put(shost); | |
11781 | release_region: | |
71f36115 MW |
11782 | pci_release_regions(pdev); |
11783 | disable_device: | |
78e77d8b MW |
11784 | pci_disable_device(pdev); |
11785 | fail: | |
11786 | return err; | |
11787 | } | |
11788 | ||
6f039790 | 11789 | static void advansys_pci_remove(struct pci_dev *pdev) |
78e77d8b MW |
11790 | { |
11791 | advansys_release(pci_get_drvdata(pdev)); | |
71f36115 | 11792 | pci_release_regions(pdev); |
78e77d8b MW |
11793 | pci_disable_device(pdev); |
11794 | } | |
11795 | ||
11796 | static struct pci_driver advansys_pci_driver = { | |
01fbfe0b | 11797 | .name = DRV_NAME, |
78e77d8b MW |
11798 | .id_table = advansys_pci_tbl, |
11799 | .probe = advansys_pci_probe, | |
6f039790 | 11800 | .remove = advansys_pci_remove, |
78e77d8b | 11801 | }; |
8c6af9e1 | 11802 | |
8dfb5379 MW |
11803 | static int __init advansys_init(void) |
11804 | { | |
c304ec94 | 11805 | int error; |
b09e05a7 | 11806 | |
c304ec94 MW |
11807 | error = isa_register_driver(&advansys_isa_driver, |
11808 | ASC_IOADR_TABLE_MAX_IX); | |
78e77d8b MW |
11809 | if (error) |
11810 | goto fail; | |
8dfb5379 | 11811 | |
c304ec94 MW |
11812 | error = isa_register_driver(&advansys_vlb_driver, |
11813 | ASC_IOADR_TABLE_MAX_IX); | |
11814 | if (error) | |
11815 | goto unregister_isa; | |
11816 | ||
11817 | error = eisa_driver_register(&advansys_eisa_driver); | |
11818 | if (error) | |
11819 | goto unregister_vlb; | |
11820 | ||
b09e05a7 MW |
11821 | error = pci_register_driver(&advansys_pci_driver); |
11822 | if (error) | |
11823 | goto unregister_eisa; | |
11824 | ||
8dfb5379 | 11825 | return 0; |
78e77d8b | 11826 | |
b09e05a7 MW |
11827 | unregister_eisa: |
11828 | eisa_driver_unregister(&advansys_eisa_driver); | |
c304ec94 MW |
11829 | unregister_vlb: |
11830 | isa_unregister_driver(&advansys_vlb_driver); | |
11831 | unregister_isa: | |
11832 | isa_unregister_driver(&advansys_isa_driver); | |
78e77d8b | 11833 | fail: |
78e77d8b | 11834 | return error; |
8dfb5379 MW |
11835 | } |
11836 | ||
11837 | static void __exit advansys_exit(void) | |
11838 | { | |
78e77d8b | 11839 | pci_unregister_driver(&advansys_pci_driver); |
b09e05a7 | 11840 | eisa_driver_unregister(&advansys_eisa_driver); |
c304ec94 MW |
11841 | isa_unregister_driver(&advansys_vlb_driver); |
11842 | isa_unregister_driver(&advansys_isa_driver); | |
8dfb5379 MW |
11843 | } |
11844 | ||
11845 | module_init(advansys_init); | |
11846 | module_exit(advansys_exit); | |
11847 | ||
8c6af9e1 | 11848 | MODULE_LICENSE("GPL"); |
989bb5f5 JSR |
11849 | MODULE_FIRMWARE("advansys/mcode.bin"); |
11850 | MODULE_FIRMWARE("advansys/3550.bin"); | |
11851 | MODULE_FIRMWARE("advansys/38C0800.bin"); | |
11852 | MODULE_FIRMWARE("advansys/38C1600.bin"); |