]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Adaptec AIC79xx device driver for Linux. | |
3 | * | |
4 | * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $ | |
5 | * | |
6 | * -------------------------------------------------------------------------- | |
7 | * Copyright (c) 1994-2000 Justin T. Gibbs. | |
8 | * Copyright (c) 1997-1999 Doug Ledford | |
9 | * Copyright (c) 2000-2003 Adaptec Inc. | |
10 | * All rights reserved. | |
11 | * | |
12 | * Redistribution and use in source and binary forms, with or without | |
13 | * modification, are permitted provided that the following conditions | |
14 | * are met: | |
15 | * 1. Redistributions of source code must retain the above copyright | |
16 | * notice, this list of conditions, and the following disclaimer, | |
17 | * without modification. | |
18 | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
19 | * substantially similar to the "NO WARRANTY" disclaimer below | |
20 | * ("Disclaimer") and any redistribution must be conditioned upon | |
21 | * including a substantially similar Disclaimer requirement for further | |
22 | * binary redistribution. | |
23 | * 3. Neither the names of the above-listed copyright holders nor the names | |
24 | * of any contributors may be used to endorse or promote products derived | |
25 | * from this software without specific prior written permission. | |
26 | * | |
27 | * Alternatively, this software may be distributed under the terms of the | |
28 | * GNU General Public License ("GPL") version 2 as published by the Free | |
29 | * Software Foundation. | |
30 | * | |
31 | * NO WARRANTY | |
32 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
33 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
34 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
35 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
36 | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
37 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
38 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
39 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
40 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
41 | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
42 | * POSSIBILITY OF SUCH DAMAGES. | |
43 | */ | |
44 | ||
45 | #include "aic79xx_osm.h" | |
46 | #include "aic79xx_inline.h" | |
47 | #include <scsi/scsicam.h> | |
48 | ||
73a25462 HR |
49 | static struct scsi_transport_template *ahd_linux_transport_template = NULL; |
50 | ||
1da177e4 LT |
51 | /* |
52 | * Include aiclib.c as part of our | |
53 | * "module dependencies are hard" work around. | |
54 | */ | |
55 | #include "aiclib.c" | |
56 | ||
57 | #include <linux/init.h> /* __setup */ | |
1da177e4 | 58 | #include <linux/mm.h> /* For fetching system memory size */ |
73a25462 | 59 | #include <linux/blkdev.h> /* For block_size() */ |
1da177e4 LT |
60 | #include <linux/delay.h> /* For ssleep/msleep */ |
61 | ||
1da177e4 LT |
62 | /* |
63 | * Bucket size for counting good commands in between bad ones. | |
64 | */ | |
65 | #define AHD_LINUX_ERR_THRESH 1000 | |
66 | ||
67 | /* | |
68 | * Set this to the delay in seconds after SCSI bus reset. | |
69 | * Note, we honor this only for the initial bus reset. | |
70 | * The scsi error recovery code performs its own bus settle | |
71 | * delay handling for error recovery actions. | |
72 | */ | |
73 | #ifdef CONFIG_AIC79XX_RESET_DELAY_MS | |
74 | #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS | |
75 | #else | |
76 | #define AIC79XX_RESET_DELAY 5000 | |
77 | #endif | |
78 | ||
79 | /* | |
80 | * To change the default number of tagged transactions allowed per-device, | |
81 | * add a line to the lilo.conf file like: | |
82 | * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}" | |
83 | * which will result in the first four devices on the first two | |
84 | * controllers being set to a tagged queue depth of 32. | |
85 | * | |
86 | * The tag_commands is an array of 16 to allow for wide and twin adapters. | |
87 | * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15 | |
88 | * for channel 1. | |
89 | */ | |
90 | typedef struct { | |
91 | uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */ | |
92 | } adapter_tag_info_t; | |
93 | ||
94 | /* | |
95 | * Modify this as you see fit for your system. | |
96 | * | |
97 | * 0 tagged queuing disabled | |
98 | * 1 <= n <= 253 n == max tags ever dispatched. | |
99 | * | |
100 | * The driver will throttle the number of commands dispatched to a | |
101 | * device if it returns queue full. For devices with a fixed maximum | |
102 | * queue depth, the driver will eventually determine this depth and | |
103 | * lock it in (a console message is printed to indicate that a lock | |
104 | * has occurred). On some devices, queue full is returned for a temporary | |
105 | * resource shortage. These devices will return queue full at varying | |
106 | * depths. The driver will throttle back when the queue fulls occur and | |
107 | * attempt to slowly increase the depth over time as the device recovers | |
108 | * from the resource shortage. | |
109 | * | |
110 | * In this example, the first line will disable tagged queueing for all | |
111 | * the devices on the first probed aic79xx adapter. | |
112 | * | |
113 | * The second line enables tagged queueing with 4 commands/LUN for IDs | |
114 | * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the | |
115 | * driver to attempt to use up to 64 tags for ID 1. | |
116 | * | |
117 | * The third line is the same as the first line. | |
118 | * | |
119 | * The fourth line disables tagged queueing for devices 0 and 3. It | |
120 | * enables tagged queueing for the other IDs, with 16 commands/LUN | |
121 | * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for | |
122 | * IDs 2, 5-7, and 9-15. | |
123 | */ | |
124 | ||
125 | /* | |
126 | * NOTE: The below structure is for reference only, the actual structure | |
127 | * to modify in order to change things is just below this comment block. | |
128 | adapter_tag_info_t aic79xx_tag_info[] = | |
129 | { | |
130 | {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, | |
131 | {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}}, | |
132 | {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, | |
133 | {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}} | |
134 | }; | |
135 | */ | |
136 | ||
137 | #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE | |
138 | #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE | |
139 | #else | |
140 | #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE | |
141 | #endif | |
142 | ||
143 | #define AIC79XX_CONFIGED_TAG_COMMANDS { \ | |
144 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
145 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
146 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
147 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
148 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
149 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
150 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \ | |
151 | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \ | |
152 | } | |
153 | ||
154 | /* | |
155 | * By default, use the number of commands specified by | |
156 | * the users kernel configuration. | |
157 | */ | |
158 | static adapter_tag_info_t aic79xx_tag_info[] = | |
159 | { | |
160 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
161 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
162 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
163 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
164 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
165 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
166 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
167 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
168 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
169 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
170 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
171 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
172 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
173 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
174 | {AIC79XX_CONFIGED_TAG_COMMANDS}, | |
175 | {AIC79XX_CONFIGED_TAG_COMMANDS} | |
176 | }; | |
177 | ||
1da177e4 LT |
178 | /* |
179 | * The I/O cell on the chip is very configurable in respect to its analog | |
180 | * characteristics. Set the defaults here; they can be overriden with | |
181 | * the proper insmod parameters. | |
182 | */ | |
183 | struct ahd_linux_iocell_opts | |
184 | { | |
185 | uint8_t precomp; | |
186 | uint8_t slewrate; | |
187 | uint8_t amplitude; | |
188 | }; | |
189 | #define AIC79XX_DEFAULT_PRECOMP 0xFF | |
190 | #define AIC79XX_DEFAULT_SLEWRATE 0xFF | |
191 | #define AIC79XX_DEFAULT_AMPLITUDE 0xFF | |
192 | #define AIC79XX_DEFAULT_IOOPTS \ | |
193 | { \ | |
194 | AIC79XX_DEFAULT_PRECOMP, \ | |
195 | AIC79XX_DEFAULT_SLEWRATE, \ | |
196 | AIC79XX_DEFAULT_AMPLITUDE \ | |
197 | } | |
198 | #define AIC79XX_PRECOMP_INDEX 0 | |
199 | #define AIC79XX_SLEWRATE_INDEX 1 | |
200 | #define AIC79XX_AMPLITUDE_INDEX 2 | |
201 | static struct ahd_linux_iocell_opts aic79xx_iocell_info[] = | |
202 | { | |
203 | AIC79XX_DEFAULT_IOOPTS, | |
204 | AIC79XX_DEFAULT_IOOPTS, | |
205 | AIC79XX_DEFAULT_IOOPTS, | |
206 | AIC79XX_DEFAULT_IOOPTS, | |
207 | AIC79XX_DEFAULT_IOOPTS, | |
208 | AIC79XX_DEFAULT_IOOPTS, | |
209 | AIC79XX_DEFAULT_IOOPTS, | |
210 | AIC79XX_DEFAULT_IOOPTS, | |
211 | AIC79XX_DEFAULT_IOOPTS, | |
212 | AIC79XX_DEFAULT_IOOPTS, | |
213 | AIC79XX_DEFAULT_IOOPTS, | |
214 | AIC79XX_DEFAULT_IOOPTS, | |
215 | AIC79XX_DEFAULT_IOOPTS, | |
216 | AIC79XX_DEFAULT_IOOPTS, | |
217 | AIC79XX_DEFAULT_IOOPTS, | |
218 | AIC79XX_DEFAULT_IOOPTS | |
219 | }; | |
220 | ||
221 | /* | |
222 | * There should be a specific return value for this in scsi.h, but | |
223 | * it seems that most drivers ignore it. | |
224 | */ | |
225 | #define DID_UNDERFLOW DID_ERROR | |
226 | ||
227 | void | |
228 | ahd_print_path(struct ahd_softc *ahd, struct scb *scb) | |
229 | { | |
230 | printk("(scsi%d:%c:%d:%d): ", | |
231 | ahd->platform_data->host->host_no, | |
232 | scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X', | |
233 | scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1, | |
234 | scb != NULL ? SCB_GET_LUN(scb) : -1); | |
235 | } | |
236 | ||
237 | /* | |
238 | * XXX - these options apply unilaterally to _all_ adapters | |
239 | * cards in the system. This should be fixed. Exceptions to this | |
240 | * rule are noted in the comments. | |
241 | */ | |
242 | ||
243 | /* | |
244 | * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This | |
245 | * has no effect on any later resets that might occur due to things like | |
246 | * SCSI bus timeouts. | |
247 | */ | |
248 | static uint32_t aic79xx_no_reset; | |
249 | ||
250 | /* | |
251 | * Certain PCI motherboards will scan PCI devices from highest to lowest, | |
252 | * others scan from lowest to highest, and they tend to do all kinds of | |
253 | * strange things when they come into contact with PCI bridge chips. The | |
254 | * net result of all this is that the PCI card that is actually used to boot | |
255 | * the machine is very hard to detect. Most motherboards go from lowest | |
256 | * PCI slot number to highest, and the first SCSI controller found is the | |
257 | * one you boot from. The only exceptions to this are when a controller | |
258 | * has its BIOS disabled. So, we by default sort all of our SCSI controllers | |
259 | * from lowest PCI slot number to highest PCI slot number. We also force | |
260 | * all controllers with their BIOS disabled to the end of the list. This | |
261 | * works on *almost* all computers. Where it doesn't work, we have this | |
262 | * option. Setting this option to non-0 will reverse the order of the sort | |
263 | * to highest first, then lowest, but will still leave cards with their BIOS | |
264 | * disabled at the very end. That should fix everyone up unless there are | |
265 | * really strange cirumstances. | |
266 | */ | |
267 | static uint32_t aic79xx_reverse_scan; | |
268 | ||
269 | /* | |
270 | * Should we force EXTENDED translation on a controller. | |
271 | * 0 == Use whatever is in the SEEPROM or default to off | |
272 | * 1 == Use whatever is in the SEEPROM or default to on | |
273 | */ | |
274 | static uint32_t aic79xx_extended; | |
275 | ||
276 | /* | |
277 | * PCI bus parity checking of the Adaptec controllers. This is somewhat | |
278 | * dubious at best. To my knowledge, this option has never actually | |
279 | * solved a PCI parity problem, but on certain machines with broken PCI | |
280 | * chipset configurations, it can generate tons of false error messages. | |
281 | * It's included in the driver for completeness. | |
282 | * 0 = Shut off PCI parity check | |
283 | * non-0 = Enable PCI parity check | |
284 | * | |
285 | * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this | |
286 | * variable to -1 you would actually want to simply pass the variable | |
287 | * name without a number. That will invert the 0 which will result in | |
288 | * -1. | |
289 | */ | |
290 | static uint32_t aic79xx_pci_parity = ~0; | |
291 | ||
292 | /* | |
293 | * There are lots of broken chipsets in the world. Some of them will | |
294 | * violate the PCI spec when we issue byte sized memory writes to our | |
295 | * controller. I/O mapped register access, if allowed by the given | |
296 | * platform, will work in almost all cases. | |
297 | */ | |
298 | uint32_t aic79xx_allow_memio = ~0; | |
299 | ||
1da177e4 LT |
300 | /* |
301 | * So that we can set how long each device is given as a selection timeout. | |
302 | * The table of values goes like this: | |
303 | * 0 - 256ms | |
304 | * 1 - 128ms | |
305 | * 2 - 64ms | |
306 | * 3 - 32ms | |
307 | * We default to 256ms because some older devices need a longer time | |
308 | * to respond to initial selection. | |
309 | */ | |
310 | static uint32_t aic79xx_seltime; | |
311 | ||
312 | /* | |
313 | * Certain devices do not perform any aging on commands. Should the | |
314 | * device be saturated by commands in one portion of the disk, it is | |
315 | * possible for transactions on far away sectors to never be serviced. | |
316 | * To handle these devices, we can periodically send an ordered tag to | |
317 | * force all outstanding transactions to be serviced prior to a new | |
318 | * transaction. | |
319 | */ | |
320 | uint32_t aic79xx_periodic_otag; | |
321 | ||
322 | /* | |
323 | * Module information and settable options. | |
324 | */ | |
325 | static char *aic79xx = NULL; | |
326 | ||
327 | MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>"); | |
328 | MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver"); | |
329 | MODULE_LICENSE("Dual BSD/GPL"); | |
330 | MODULE_VERSION(AIC79XX_DRIVER_VERSION); | |
73a25462 | 331 | module_param(aic79xx, charp, 0444); |
1da177e4 LT |
332 | MODULE_PARM_DESC(aic79xx, |
333 | "period delimited, options string.\n" | |
334 | " verbose Enable verbose/diagnostic logging\n" | |
335 | " allow_memio Allow device registers to be memory mapped\n" | |
336 | " debug Bitmask of debug values to enable\n" | |
337 | " no_reset Supress initial bus resets\n" | |
338 | " extended Enable extended geometry on all controllers\n" | |
339 | " periodic_otag Send an ordered tagged transaction\n" | |
340 | " periodically to prevent tag starvation.\n" | |
341 | " This may be required by some older disk\n" | |
342 | " or drives/RAID arrays.\n" | |
343 | " reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" | |
344 | " tag_info:<tag_str> Set per-target tag depth\n" | |
345 | " global_tag_depth:<int> Global tag depth for all targets on all buses\n" | |
1da177e4 LT |
346 | " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n" |
347 | " precomp:<pcomp_list> Set the signal precompensation (0-7).\n" | |
348 | " amplitude:<int> Set the signal amplitude (0-7).\n" | |
349 | " seltime:<int> Selection Timeout:\n" | |
350 | " (0/256ms,1/128ms,2/64ms,3/32ms)\n" | |
351 | "\n" | |
352 | " Sample /etc/modprobe.conf line:\n" | |
353 | " Enable verbose logging\n" | |
354 | " Set tag depth on Controller 2/Target 2 to 10 tags\n" | |
355 | " Shorten the selection timeout to 128ms\n" | |
356 | "\n" | |
357 | " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" | |
73a25462 | 358 | "\n"); |
1da177e4 LT |
359 | |
360 | static void ahd_linux_handle_scsi_status(struct ahd_softc *, | |
73a25462 | 361 | struct scsi_device *, |
1da177e4 LT |
362 | struct scb *); |
363 | static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, | |
73a25462 | 364 | struct scsi_cmnd *cmd); |
1da177e4 | 365 | static void ahd_linux_sem_timeout(u_long arg); |
73a25462 | 366 | static int ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag); |
1da177e4 | 367 | static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd); |
1da177e4 LT |
368 | static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd, |
369 | struct ahd_devinfo *devinfo); | |
73a25462 | 370 | static void ahd_linux_device_queue_depth(struct scsi_device *); |
60a13213 | 371 | static int ahd_linux_run_command(struct ahd_softc*, |
73a25462 | 372 | struct ahd_linux_device *, |
60a13213 | 373 | struct scsi_cmnd *); |
1da177e4 LT |
374 | static void ahd_linux_setup_tag_info_global(char *p); |
375 | static aic_option_callback_t ahd_linux_setup_tag_info; | |
1da177e4 | 376 | static aic_option_callback_t ahd_linux_setup_iocell_info; |
73a25462 | 377 | static int aic79xx_setup(char *c); |
85a46523 CH |
378 | |
379 | static int ahd_linux_unit; | |
380 | ||
1da177e4 LT |
381 | |
382 | /****************************** Inlines ***************************************/ | |
1da177e4 LT |
383 | static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*); |
384 | ||
1da177e4 LT |
385 | static __inline void |
386 | ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb) | |
387 | { | |
73a25462 | 388 | struct scsi_cmnd *cmd; |
1da177e4 LT |
389 | int direction; |
390 | ||
391 | cmd = scb->io_ctx; | |
be7db055 | 392 | direction = cmd->sc_data_direction; |
1da177e4 LT |
393 | ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE); |
394 | if (cmd->use_sg != 0) { | |
395 | struct scatterlist *sg; | |
396 | ||
397 | sg = (struct scatterlist *)cmd->request_buffer; | |
398 | pci_unmap_sg(ahd->dev_softc, sg, cmd->use_sg, direction); | |
399 | } else if (cmd->request_bufflen != 0) { | |
400 | pci_unmap_single(ahd->dev_softc, | |
401 | scb->platform_data->buf_busaddr, | |
402 | cmd->request_bufflen, direction); | |
403 | } | |
404 | } | |
405 | ||
406 | /******************************** Macros **************************************/ | |
407 | #define BUILD_SCSIID(ahd, cmd) \ | |
408 | ((((cmd)->device->id << TID_SHIFT) & TID) | (ahd)->our_id) | |
409 | ||
1da177e4 LT |
410 | /* |
411 | * Return a string describing the driver. | |
412 | */ | |
413 | static const char * | |
414 | ahd_linux_info(struct Scsi_Host *host) | |
415 | { | |
416 | static char buffer[512]; | |
417 | char ahd_info[256]; | |
418 | char *bp; | |
419 | struct ahd_softc *ahd; | |
420 | ||
421 | bp = &buffer[0]; | |
422 | ahd = *(struct ahd_softc **)host->hostdata; | |
423 | memset(bp, 0, sizeof(buffer)); | |
424 | strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev "); | |
425 | strcat(bp, AIC79XX_DRIVER_VERSION); | |
426 | strcat(bp, "\n"); | |
427 | strcat(bp, " <"); | |
428 | strcat(bp, ahd->description); | |
429 | strcat(bp, ">\n"); | |
430 | strcat(bp, " "); | |
431 | ahd_controller_info(ahd, ahd_info); | |
432 | strcat(bp, ahd_info); | |
433 | strcat(bp, "\n"); | |
434 | ||
435 | return (bp); | |
436 | } | |
437 | ||
438 | /* | |
439 | * Queue an SCB to the controller. | |
440 | */ | |
441 | static int | |
73a25462 | 442 | ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *)) |
1da177e4 LT |
443 | { |
444 | struct ahd_softc *ahd; | |
73a25462 | 445 | struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device); |
1da177e4 LT |
446 | |
447 | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | |
448 | ||
1da177e4 LT |
449 | /* |
450 | * Close the race of a command that was in the process of | |
451 | * being queued to us just as our simq was frozen. Let | |
452 | * DV commands through so long as we are only frozen to | |
453 | * perform DV. | |
454 | */ | |
73a25462 | 455 | if (ahd->platform_data->qfrozen != 0) { |
60a13213 | 456 | printf("%s: queue frozen\n", ahd_name(ahd)); |
1da177e4 | 457 | |
60a13213 | 458 | return SCSI_MLQUEUE_HOST_BUSY; |
1da177e4 | 459 | } |
60a13213 HR |
460 | |
461 | /* | |
462 | * Save the callback on completion function. | |
463 | */ | |
464 | cmd->scsi_done = scsi_done; | |
465 | ||
1da177e4 | 466 | cmd->result = CAM_REQ_INPROG << 16; |
60a13213 HR |
467 | |
468 | return ahd_linux_run_command(ahd, dev, cmd); | |
1da177e4 LT |
469 | } |
470 | ||
73a25462 HR |
471 | static inline struct scsi_target ** |
472 | ahd_linux_target_in_softc(struct scsi_target *starget) | |
473 | { | |
474 | struct ahd_softc *ahd = | |
475 | *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata); | |
476 | unsigned int target_offset; | |
477 | ||
478 | target_offset = starget->id; | |
479 | if (starget->channel != 0) | |
480 | target_offset += 8; | |
481 | ||
482 | return &ahd->platform_data->starget[target_offset]; | |
483 | } | |
484 | ||
1da177e4 | 485 | static int |
73a25462 | 486 | ahd_linux_target_alloc(struct scsi_target *starget) |
1da177e4 | 487 | { |
73a25462 HR |
488 | struct ahd_softc *ahd = |
489 | *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata); | |
490 | unsigned long flags; | |
491 | struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget); | |
492 | struct ahd_linux_target *targ = scsi_transport_target_data(starget); | |
493 | struct ahd_devinfo devinfo; | |
494 | struct ahd_initiator_tinfo *tinfo; | |
495 | struct ahd_tmode_tstate *tstate; | |
496 | char channel = starget->channel + 'A'; | |
1da177e4 | 497 | |
73a25462 HR |
498 | ahd_lock(ahd, &flags); |
499 | ||
500 | BUG_ON(*ahd_targp != NULL); | |
501 | ||
502 | *ahd_targp = starget; | |
503 | memset(targ, 0, sizeof(*targ)); | |
504 | ||
505 | tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id, | |
506 | starget->id, &tstate); | |
507 | ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id, | |
508 | CAM_LUN_WILDCARD, channel, | |
509 | ROLE_INITIATOR); | |
510 | spi_min_period(starget) = AHD_SYNCRATE_MAX; /* We can do U320 */ | |
511 | if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) | |
512 | spi_max_offset(starget) = MAX_OFFSET_PACED_BUG; | |
513 | else | |
514 | spi_max_offset(starget) = MAX_OFFSET_PACED; | |
515 | spi_max_width(starget) = ahd->features & AHD_WIDE; | |
516 | ||
517 | ahd_set_syncrate(ahd, &devinfo, 0, 0, 0, | |
518 | AHD_TRANS_GOAL, /*paused*/FALSE); | |
519 | ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, | |
520 | AHD_TRANS_GOAL, /*paused*/FALSE); | |
521 | ahd_unlock(ahd, &flags); | |
522 | ||
523 | return 0; | |
524 | } | |
525 | ||
526 | static void | |
527 | ahd_linux_target_destroy(struct scsi_target *starget) | |
528 | { | |
529 | struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget); | |
530 | ||
531 | *ahd_targp = NULL; | |
1da177e4 LT |
532 | } |
533 | ||
534 | static int | |
73a25462 | 535 | ahd_linux_slave_alloc(struct scsi_device *sdev) |
1da177e4 | 536 | { |
73a25462 HR |
537 | struct ahd_softc *ahd = |
538 | *((struct ahd_softc **)sdev->host->hostdata); | |
539 | struct scsi_target *starget = sdev->sdev_target; | |
540 | struct ahd_linux_target *targ = scsi_transport_target_data(starget); | |
541 | struct ahd_linux_device *dev; | |
1da177e4 | 542 | |
1da177e4 | 543 | if (bootverbose) |
73a25462 HR |
544 | printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id); |
545 | ||
546 | BUG_ON(targ->sdev[sdev->lun] != NULL); | |
547 | ||
548 | dev = scsi_transport_device_data(sdev); | |
549 | memset(dev, 0, sizeof(*dev)); | |
550 | ||
551 | /* | |
552 | * We start out life using untagged | |
553 | * transactions of which we allow one. | |
554 | */ | |
555 | dev->openings = 1; | |
556 | ||
1da177e4 | 557 | /* |
73a25462 HR |
558 | * Set maxtags to 0. This will be changed if we |
559 | * later determine that we are dealing with | |
560 | * a tagged queuing capable device. | |
1da177e4 | 561 | */ |
73a25462 HR |
562 | dev->maxtags = 0; |
563 | ||
564 | targ->sdev[sdev->lun] = sdev; | |
565 | ||
1da177e4 LT |
566 | return (0); |
567 | } | |
568 | ||
73a25462 HR |
569 | static int |
570 | ahd_linux_slave_configure(struct scsi_device *sdev) | |
571 | { | |
572 | struct ahd_softc *ahd; | |
573 | ||
574 | ahd = *((struct ahd_softc **)sdev->host->hostdata); | |
575 | if (bootverbose) | |
576 | printf("%s: Slave Configure %d\n", ahd_name(ahd), sdev->id); | |
577 | ||
578 | ahd_linux_device_queue_depth(sdev); | |
579 | ||
580 | /* Initial Domain Validation */ | |
581 | if (!spi_initial_dv(sdev->sdev_target)) | |
582 | spi_dv_device(sdev); | |
583 | ||
584 | return 0; | |
585 | } | |
586 | ||
1da177e4 | 587 | static void |
73a25462 | 588 | ahd_linux_slave_destroy(struct scsi_device *sdev) |
1da177e4 LT |
589 | { |
590 | struct ahd_softc *ahd; | |
73a25462 HR |
591 | struct ahd_linux_device *dev = scsi_transport_device_data(sdev); |
592 | struct ahd_linux_target *targ = scsi_transport_target_data(sdev->sdev_target); | |
1da177e4 | 593 | |
73a25462 | 594 | ahd = *((struct ahd_softc **)sdev->host->hostdata); |
1da177e4 | 595 | if (bootverbose) |
73a25462 HR |
596 | printf("%s: Slave Destroy %d\n", ahd_name(ahd), sdev->id); |
597 | ||
598 | BUG_ON(dev->active); | |
599 | ||
600 | targ->sdev[sdev->lun] = NULL; | |
1da177e4 | 601 | |
1da177e4 | 602 | } |
1da177e4 LT |
603 | |
604 | #if defined(__i386__) | |
605 | /* | |
606 | * Return the disk geometry for the given SCSI device. | |
607 | */ | |
608 | static int | |
1da177e4 LT |
609 | ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev, |
610 | sector_t capacity, int geom[]) | |
611 | { | |
612 | uint8_t *bh; | |
1da177e4 LT |
613 | int heads; |
614 | int sectors; | |
615 | int cylinders; | |
616 | int ret; | |
617 | int extended; | |
618 | struct ahd_softc *ahd; | |
619 | ||
620 | ahd = *((struct ahd_softc **)sdev->host->hostdata); | |
621 | ||
1da177e4 | 622 | bh = scsi_bios_ptable(bdev); |
1da177e4 LT |
623 | if (bh) { |
624 | ret = scsi_partsize(bh, capacity, | |
625 | &geom[2], &geom[0], &geom[1]); | |
1da177e4 | 626 | kfree(bh); |
1da177e4 LT |
627 | if (ret != -1) |
628 | return (ret); | |
629 | } | |
630 | heads = 64; | |
631 | sectors = 32; | |
632 | cylinders = aic_sector_div(capacity, heads, sectors); | |
633 | ||
634 | if (aic79xx_extended != 0) | |
635 | extended = 1; | |
636 | else | |
637 | extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0; | |
638 | if (extended && cylinders >= 1024) { | |
639 | heads = 255; | |
640 | sectors = 63; | |
641 | cylinders = aic_sector_div(capacity, heads, sectors); | |
642 | } | |
643 | geom[0] = heads; | |
644 | geom[1] = sectors; | |
645 | geom[2] = cylinders; | |
646 | return (0); | |
647 | } | |
648 | #endif | |
649 | ||
650 | /* | |
651 | * Abort the current SCSI command(s). | |
652 | */ | |
653 | static int | |
73a25462 HR |
654 | ahd_linux_abort(struct scsi_cmnd *cmd) |
655 | { | |
656 | int error; | |
657 | ||
658 | error = ahd_linux_queue_recovery_cmd(cmd, SCB_ABORT); | |
659 | if (error != 0) | |
660 | printf("aic79xx_abort returns 0x%x\n", error); | |
661 | return error; | |
662 | } | |
663 | ||
664 | /* | |
665 | * Attempt to send a target reset message to the device that timed out. | |
666 | */ | |
667 | static int | |
668 | ahd_linux_dev_reset(struct scsi_cmnd *cmd) | |
669 | { | |
670 | int error; | |
671 | ||
672 | error = ahd_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET); | |
673 | if (error != 0) | |
674 | printf("aic79xx_dev_reset returns 0x%x\n", error); | |
675 | return error; | |
676 | } | |
677 | ||
678 | /* | |
679 | * Reset the SCSI bus. | |
680 | */ | |
681 | static int | |
682 | ahd_linux_bus_reset(struct scsi_cmnd *cmd) | |
1da177e4 LT |
683 | { |
684 | struct ahd_softc *ahd; | |
1da177e4 | 685 | u_long s; |
73a25462 | 686 | int found; |
1da177e4 | 687 | |
1da177e4 | 688 | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; |
73a25462 HR |
689 | #ifdef AHD_DEBUG |
690 | if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) | |
691 | printf("%s: Bus reset called for cmd %p\n", | |
692 | ahd_name(ahd), cmd); | |
693 | #endif | |
694 | ahd_lock(ahd, &s); | |
695 | found = ahd_reset_channel(ahd, cmd->device->channel + 'A', | |
696 | /*initiate reset*/TRUE); | |
697 | ahd_unlock(ahd, &s); | |
1da177e4 | 698 | |
73a25462 HR |
699 | if (bootverbose) |
700 | printf("%s: SCSI bus reset delivered. " | |
701 | "%d SCBs aborted.\n", ahd_name(ahd), found); | |
1da177e4 | 702 | |
73a25462 HR |
703 | return (SUCCESS); |
704 | } | |
1da177e4 | 705 | |
73a25462 HR |
706 | struct scsi_host_template aic79xx_driver_template = { |
707 | .module = THIS_MODULE, | |
708 | .name = "aic79xx", | |
85a46523 | 709 | .proc_name = "aic79xx", |
73a25462 HR |
710 | .proc_info = ahd_linux_proc_info, |
711 | .info = ahd_linux_info, | |
712 | .queuecommand = ahd_linux_queue, | |
713 | .eh_abort_handler = ahd_linux_abort, | |
714 | .eh_device_reset_handler = ahd_linux_dev_reset, | |
715 | .eh_bus_reset_handler = ahd_linux_bus_reset, | |
716 | #if defined(__i386__) | |
717 | .bios_param = ahd_linux_biosparam, | |
718 | #endif | |
719 | .can_queue = AHD_MAX_QUEUE, | |
720 | .this_id = -1, | |
721 | .cmd_per_lun = 2, | |
722 | .use_clustering = ENABLE_CLUSTERING, | |
723 | .slave_alloc = ahd_linux_slave_alloc, | |
724 | .slave_configure = ahd_linux_slave_configure, | |
725 | .slave_destroy = ahd_linux_slave_destroy, | |
726 | .target_alloc = ahd_linux_target_alloc, | |
727 | .target_destroy = ahd_linux_target_destroy, | |
728 | }; | |
1da177e4 | 729 | |
73a25462 HR |
730 | /******************************** Bus DMA *************************************/ |
731 | int | |
732 | ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent, | |
733 | bus_size_t alignment, bus_size_t boundary, | |
734 | dma_addr_t lowaddr, dma_addr_t highaddr, | |
735 | bus_dma_filter_t *filter, void *filterarg, | |
736 | bus_size_t maxsize, int nsegments, | |
737 | bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag) | |
738 | { | |
739 | bus_dma_tag_t dmat; | |
740 | ||
741 | dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT); | |
742 | if (dmat == NULL) | |
743 | return (ENOMEM); | |
1da177e4 | 744 | |
1da177e4 | 745 | /* |
73a25462 HR |
746 | * Linux is very simplistic about DMA memory. For now don't |
747 | * maintain all specification information. Once Linux supplies | |
748 | * better facilities for doing these operations, or the | |
749 | * needs of this particular driver change, we might need to do | |
750 | * more here. | |
1da177e4 | 751 | */ |
73a25462 HR |
752 | dmat->alignment = alignment; |
753 | dmat->boundary = boundary; | |
754 | dmat->maxsize = maxsize; | |
755 | *ret_tag = dmat; | |
756 | return (0); | |
757 | } | |
1da177e4 | 758 | |
73a25462 HR |
759 | void |
760 | ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat) | |
761 | { | |
762 | free(dmat, M_DEVBUF); | |
763 | } | |
1da177e4 | 764 | |
73a25462 HR |
765 | int |
766 | ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr, | |
767 | int flags, bus_dmamap_t *mapp) | |
768 | { | |
769 | *vaddr = pci_alloc_consistent(ahd->dev_softc, | |
770 | dmat->maxsize, mapp); | |
771 | if (*vaddr == NULL) | |
772 | return (ENOMEM); | |
773 | return(0); | |
774 | } | |
1da177e4 | 775 | |
73a25462 HR |
776 | void |
777 | ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat, | |
778 | void* vaddr, bus_dmamap_t map) | |
779 | { | |
780 | pci_free_consistent(ahd->dev_softc, dmat->maxsize, | |
781 | vaddr, map); | |
782 | } | |
783 | ||
784 | int | |
785 | ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map, | |
786 | void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb, | |
787 | void *cb_arg, int flags) | |
788 | { | |
1da177e4 | 789 | /* |
73a25462 HR |
790 | * Assume for now that this will only be used during |
791 | * initialization and not for per-transaction buffer mapping. | |
1da177e4 | 792 | */ |
73a25462 | 793 | bus_dma_segment_t stack_sg; |
1da177e4 | 794 | |
73a25462 HR |
795 | stack_sg.ds_addr = map; |
796 | stack_sg.ds_len = dmat->maxsize; | |
797 | cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0); | |
798 | return (0); | |
799 | } | |
1da177e4 | 800 | |
73a25462 HR |
801 | void |
802 | ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map) | |
803 | { | |
804 | } | |
1da177e4 | 805 | |
73a25462 HR |
806 | int |
807 | ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map) | |
808 | { | |
809 | /* Nothing to do */ | |
810 | return (0); | |
811 | } | |
1da177e4 | 812 | |
73a25462 HR |
813 | /********************* Platform Dependent Functions ***************************/ |
814 | /* | |
815 | * Compare "left hand" softc with "right hand" softc, returning: | |
816 | * < 0 - lahd has a lower priority than rahd | |
817 | * 0 - Softcs are equal | |
818 | * > 0 - lahd has a higher priority than rahd | |
819 | */ | |
820 | int | |
821 | ahd_softc_comp(struct ahd_softc *lahd, struct ahd_softc *rahd) | |
822 | { | |
823 | int value; | |
1da177e4 LT |
824 | |
825 | /* | |
73a25462 HR |
826 | * Under Linux, cards are ordered as follows: |
827 | * 1) PCI devices that are marked as the boot controller. | |
828 | * 2) PCI devices with BIOS enabled sorted by bus/slot/func. | |
829 | * 3) All remaining PCI devices sorted by bus/slot/func. | |
1da177e4 | 830 | */ |
73a25462 HR |
831 | #if 0 |
832 | value = (lahd->flags & AHD_BOOT_CHANNEL) | |
833 | - (rahd->flags & AHD_BOOT_CHANNEL); | |
834 | if (value != 0) | |
835 | /* Controllers set for boot have a *higher* priority */ | |
836 | return (value); | |
837 | #endif | |
1da177e4 | 838 | |
73a25462 HR |
839 | value = (lahd->flags & AHD_BIOS_ENABLED) |
840 | - (rahd->flags & AHD_BIOS_ENABLED); | |
841 | if (value != 0) | |
842 | /* Controllers with BIOS enabled have a *higher* priority */ | |
843 | return (value); | |
1da177e4 | 844 | |
73a25462 HR |
845 | /* Still equal. Sort by bus/slot/func. */ |
846 | if (aic79xx_reverse_scan != 0) | |
847 | value = ahd_get_pci_bus(lahd->dev_softc) | |
848 | - ahd_get_pci_bus(rahd->dev_softc); | |
849 | else | |
850 | value = ahd_get_pci_bus(rahd->dev_softc) | |
851 | - ahd_get_pci_bus(lahd->dev_softc); | |
852 | if (value != 0) | |
853 | return (value); | |
854 | if (aic79xx_reverse_scan != 0) | |
855 | value = ahd_get_pci_slot(lahd->dev_softc) | |
856 | - ahd_get_pci_slot(rahd->dev_softc); | |
857 | else | |
858 | value = ahd_get_pci_slot(rahd->dev_softc) | |
859 | - ahd_get_pci_slot(lahd->dev_softc); | |
860 | if (value != 0) | |
861 | return (value); | |
1da177e4 | 862 | |
73a25462 HR |
863 | value = rahd->channel - lahd->channel; |
864 | return (value); | |
865 | } | |
1da177e4 | 866 | |
73a25462 HR |
867 | static void |
868 | ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value) | |
869 | { | |
1da177e4 | 870 | |
73a25462 HR |
871 | if ((instance >= 0) |
872 | && (instance < NUM_ELEMENTS(aic79xx_iocell_info))) { | |
873 | uint8_t *iocell_info; | |
874 | ||
875 | iocell_info = (uint8_t*)&aic79xx_iocell_info[instance]; | |
876 | iocell_info[index] = value & 0xFFFF; | |
877 | if (bootverbose) | |
878 | printf("iocell[%d:%ld] = %d\n", instance, index, value); | |
1da177e4 | 879 | } |
73a25462 | 880 | } |
1da177e4 | 881 | |
73a25462 HR |
882 | static void |
883 | ahd_linux_setup_tag_info_global(char *p) | |
884 | { | |
885 | int tags, i, j; | |
1da177e4 | 886 | |
73a25462 HR |
887 | tags = simple_strtoul(p + 1, NULL, 0) & 0xff; |
888 | printf("Setting Global Tags= %d\n", tags); | |
889 | ||
890 | for (i = 0; i < NUM_ELEMENTS(aic79xx_tag_info); i++) { | |
891 | for (j = 0; j < AHD_NUM_TARGETS; j++) { | |
892 | aic79xx_tag_info[i].tag_commands[j] = tags; | |
1da177e4 | 893 | } |
1da177e4 | 894 | } |
1da177e4 LT |
895 | } |
896 | ||
1da177e4 | 897 | static void |
73a25462 | 898 | ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value) |
1da177e4 | 899 | { |
1da177e4 | 900 | |
73a25462 HR |
901 | if ((instance >= 0) && (targ >= 0) |
902 | && (instance < NUM_ELEMENTS(aic79xx_tag_info)) | |
903 | && (targ < AHD_NUM_TARGETS)) { | |
904 | aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF; | |
905 | if (bootverbose) | |
906 | printf("tag_info[%d:%d] = %d\n", instance, targ, value); | |
1da177e4 | 907 | } |
1da177e4 LT |
908 | } |
909 | ||
910 | /* | |
73a25462 HR |
911 | * Handle Linux boot parameters. This routine allows for assigning a value |
912 | * to a parameter with a ':' between the parameter and the value. | |
913 | * ie. aic79xx=stpwlev:1,extended | |
1da177e4 LT |
914 | */ |
915 | static int | |
73a25462 | 916 | aic79xx_setup(char *s) |
1da177e4 | 917 | { |
73a25462 HR |
918 | int i, n; |
919 | char *p; | |
920 | char *end; | |
1da177e4 | 921 | |
73a25462 HR |
922 | static struct { |
923 | const char *name; | |
924 | uint32_t *flag; | |
925 | } options[] = { | |
926 | { "extended", &aic79xx_extended }, | |
927 | { "no_reset", &aic79xx_no_reset }, | |
928 | { "verbose", &aic79xx_verbose }, | |
929 | { "allow_memio", &aic79xx_allow_memio}, | |
1da177e4 | 930 | #ifdef AHD_DEBUG |
73a25462 | 931 | { "debug", &ahd_debug }, |
1da177e4 | 932 | #endif |
73a25462 HR |
933 | { "reverse_scan", &aic79xx_reverse_scan }, |
934 | { "periodic_otag", &aic79xx_periodic_otag }, | |
935 | { "pci_parity", &aic79xx_pci_parity }, | |
936 | { "seltime", &aic79xx_seltime }, | |
937 | { "tag_info", NULL }, | |
938 | { "global_tag_depth", NULL}, | |
939 | { "slewrate", NULL }, | |
940 | { "precomp", NULL }, | |
941 | { "amplitude", NULL }, | |
942 | }; | |
1da177e4 | 943 | |
73a25462 | 944 | end = strchr(s, '\0'); |
1da177e4 | 945 | |
73a25462 HR |
946 | /* |
947 | * XXX ia64 gcc isn't smart enough to know that NUM_ELEMENTS | |
948 | * will never be 0 in this case. | |
949 | */ | |
950 | n = 0; | |
951 | ||
952 | while ((p = strsep(&s, ",.")) != NULL) { | |
953 | if (*p == '\0') | |
954 | continue; | |
955 | for (i = 0; i < NUM_ELEMENTS(options); i++) { | |
956 | ||
957 | n = strlen(options[i].name); | |
958 | if (strncmp(options[i].name, p, n) == 0) | |
959 | break; | |
960 | } | |
961 | if (i == NUM_ELEMENTS(options)) | |
962 | continue; | |
963 | ||
964 | if (strncmp(p, "global_tag_depth", n) == 0) { | |
965 | ahd_linux_setup_tag_info_global(p + n); | |
966 | } else if (strncmp(p, "tag_info", n) == 0) { | |
967 | s = aic_parse_brace_option("tag_info", p + n, end, | |
968 | 2, ahd_linux_setup_tag_info, 0); | |
969 | } else if (strncmp(p, "slewrate", n) == 0) { | |
970 | s = aic_parse_brace_option("slewrate", | |
971 | p + n, end, 1, ahd_linux_setup_iocell_info, | |
972 | AIC79XX_SLEWRATE_INDEX); | |
973 | } else if (strncmp(p, "precomp", n) == 0) { | |
974 | s = aic_parse_brace_option("precomp", | |
975 | p + n, end, 1, ahd_linux_setup_iocell_info, | |
976 | AIC79XX_PRECOMP_INDEX); | |
977 | } else if (strncmp(p, "amplitude", n) == 0) { | |
978 | s = aic_parse_brace_option("amplitude", | |
979 | p + n, end, 1, ahd_linux_setup_iocell_info, | |
980 | AIC79XX_AMPLITUDE_INDEX); | |
981 | } else if (p[n] == ':') { | |
982 | *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0); | |
983 | } else if (!strncmp(p, "verbose", n)) { | |
984 | *(options[i].flag) = 1; | |
985 | } else { | |
986 | *(options[i].flag) ^= 0xFFFFFFFF; | |
987 | } | |
988 | } | |
989 | return 1; | |
1da177e4 LT |
990 | } |
991 | ||
73a25462 HR |
992 | __setup("aic79xx=", aic79xx_setup); |
993 | ||
994 | uint32_t aic79xx_verbose; | |
1da177e4 | 995 | |
1da177e4 | 996 | int |
73a25462 | 997 | ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template) |
1da177e4 | 998 | { |
73a25462 HR |
999 | char buf[80]; |
1000 | struct Scsi_Host *host; | |
1001 | char *new_name; | |
1002 | u_long s; | |
1da177e4 | 1003 | |
73a25462 HR |
1004 | template->name = ahd->description; |
1005 | host = scsi_host_alloc(template, sizeof(struct ahd_softc *)); | |
1006 | if (host == NULL) | |
1da177e4 LT |
1007 | return (ENOMEM); |
1008 | ||
73a25462 HR |
1009 | *((struct ahd_softc **)host->hostdata) = ahd; |
1010 | ahd_lock(ahd, &s); | |
1011 | scsi_assign_lock(host, &ahd->platform_data->spin_lock); | |
1012 | ahd->platform_data->host = host; | |
1013 | host->can_queue = AHD_MAX_QUEUE; | |
1014 | host->cmd_per_lun = 2; | |
1015 | host->sg_tablesize = AHD_NSEG; | |
1016 | host->this_id = ahd->our_id; | |
1017 | host->irq = ahd->platform_data->irq; | |
1018 | host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8; | |
1019 | host->max_lun = AHD_NUM_LUNS; | |
1020 | host->max_channel = 0; | |
1021 | host->sg_tablesize = AHD_NSEG; | |
85a46523 | 1022 | ahd_set_unit(ahd, ahd_linux_unit++); |
73a25462 HR |
1023 | sprintf(buf, "scsi%d", host->host_no); |
1024 | new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT); | |
1025 | if (new_name != NULL) { | |
1026 | strcpy(new_name, buf); | |
1027 | ahd_set_name(ahd, new_name); | |
1028 | } | |
1029 | host->unique_id = ahd->unit; | |
1030 | ahd_linux_initialize_scsi_bus(ahd); | |
1031 | ahd_intr_enable(ahd, TRUE); | |
1032 | ahd_unlock(ahd, &s); | |
1033 | ||
1034 | host->transportt = ahd_linux_transport_template; | |
1035 | ||
1036 | scsi_add_host(host, &ahd->dev_softc->dev); /* XXX handle failure */ | |
1037 | scsi_scan_host(host); | |
1da177e4 LT |
1038 | return (0); |
1039 | } | |
1040 | ||
73a25462 HR |
1041 | uint64_t |
1042 | ahd_linux_get_memsize(void) | |
1da177e4 | 1043 | { |
73a25462 HR |
1044 | struct sysinfo si; |
1045 | ||
1046 | si_meminfo(&si); | |
1047 | return ((uint64_t)si.totalram << PAGE_SHIFT); | |
1da177e4 LT |
1048 | } |
1049 | ||
73a25462 HR |
1050 | /* |
1051 | * Place the SCSI bus into a known state by either resetting it, | |
1052 | * or forcing transfer negotiations on the next command to any | |
1053 | * target. | |
1054 | */ | |
1055 | static void | |
1056 | ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd) | |
1da177e4 | 1057 | { |
73a25462 HR |
1058 | u_int target_id; |
1059 | u_int numtarg; | |
1da177e4 | 1060 | |
73a25462 HR |
1061 | target_id = 0; |
1062 | numtarg = 0; | |
1063 | ||
1064 | if (aic79xx_no_reset != 0) | |
1065 | ahd->flags &= ~AHD_RESET_BUS_A; | |
1066 | ||
1067 | if ((ahd->flags & AHD_RESET_BUS_A) != 0) | |
1068 | ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE); | |
1069 | else | |
1070 | numtarg = (ahd->features & AHD_WIDE) ? 16 : 8; | |
1da177e4 | 1071 | |
1da177e4 | 1072 | /* |
73a25462 HR |
1073 | * Force negotiation to async for all targets that |
1074 | * will not see an initial bus reset. | |
1da177e4 | 1075 | */ |
73a25462 HR |
1076 | for (; target_id < numtarg; target_id++) { |
1077 | struct ahd_devinfo devinfo; | |
1078 | struct ahd_initiator_tinfo *tinfo; | |
1079 | struct ahd_tmode_tstate *tstate; | |
1080 | ||
1081 | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, | |
1082 | target_id, &tstate); | |
1083 | ahd_compile_devinfo(&devinfo, ahd->our_id, target_id, | |
1084 | CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR); | |
1085 | ahd_update_neg_request(ahd, &devinfo, tstate, | |
1086 | tinfo, AHD_NEG_ALWAYS); | |
1087 | } | |
1088 | /* Give the bus some time to recover */ | |
1089 | if ((ahd->flags & AHD_RESET_BUS_A) != 0) { | |
1090 | ahd_freeze_simq(ahd); | |
1091 | init_timer(&ahd->platform_data->reset_timer); | |
1092 | ahd->platform_data->reset_timer.data = (u_long)ahd; | |
1093 | ahd->platform_data->reset_timer.expires = | |
1094 | jiffies + (AIC79XX_RESET_DELAY * HZ)/1000; | |
1095 | ahd->platform_data->reset_timer.function = | |
1096 | (ahd_linux_callback_t *)ahd_release_simq; | |
1097 | add_timer(&ahd->platform_data->reset_timer); | |
1098 | } | |
1da177e4 LT |
1099 | } |
1100 | ||
1101 | int | |
73a25462 | 1102 | ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg) |
1da177e4 | 1103 | { |
73a25462 HR |
1104 | ahd->platform_data = |
1105 | malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT); | |
1106 | if (ahd->platform_data == NULL) | |
1107 | return (ENOMEM); | |
1108 | memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data)); | |
1109 | ahd->platform_data->irq = AHD_LINUX_NOIRQ; | |
1110 | ahd_lockinit(ahd); | |
1111 | init_MUTEX_LOCKED(&ahd->platform_data->eh_sem); | |
1112 | ahd->seltime = (aic79xx_seltime & 0x3) << 4; | |
1da177e4 LT |
1113 | return (0); |
1114 | } | |
1115 | ||
73a25462 HR |
1116 | void |
1117 | ahd_platform_free(struct ahd_softc *ahd) | |
1da177e4 | 1118 | { |
73a25462 HR |
1119 | struct scsi_target *starget; |
1120 | int i, j; | |
1da177e4 | 1121 | |
73a25462 HR |
1122 | if (ahd->platform_data != NULL) { |
1123 | if (ahd->platform_data->host != NULL) { | |
1124 | scsi_remove_host(ahd->platform_data->host); | |
1125 | scsi_host_put(ahd->platform_data->host); | |
1126 | } | |
1da177e4 | 1127 | |
73a25462 HR |
1128 | /* destroy all of the device and target objects */ |
1129 | for (i = 0; i < AHD_NUM_TARGETS; i++) { | |
1130 | starget = ahd->platform_data->starget[i]; | |
1131 | if (starget != NULL) { | |
1132 | for (j = 0; j < AHD_NUM_LUNS; j++) { | |
1133 | struct ahd_linux_target *targ = | |
1134 | scsi_transport_target_data(starget); | |
1135 | if (targ->sdev[j] == NULL) | |
1136 | continue; | |
1137 | targ->sdev[j] = NULL; | |
1138 | } | |
1139 | ahd->platform_data->starget[i] = NULL; | |
1140 | } | |
1141 | } | |
1da177e4 | 1142 | |
73a25462 HR |
1143 | if (ahd->platform_data->irq != AHD_LINUX_NOIRQ) |
1144 | free_irq(ahd->platform_data->irq, ahd); | |
1145 | if (ahd->tags[0] == BUS_SPACE_PIO | |
1146 | && ahd->bshs[0].ioport != 0) | |
1147 | release_region(ahd->bshs[0].ioport, 256); | |
1148 | if (ahd->tags[1] == BUS_SPACE_PIO | |
1149 | && ahd->bshs[1].ioport != 0) | |
1150 | release_region(ahd->bshs[1].ioport, 256); | |
1151 | if (ahd->tags[0] == BUS_SPACE_MEMIO | |
1152 | && ahd->bshs[0].maddr != NULL) { | |
1153 | iounmap(ahd->bshs[0].maddr); | |
1154 | release_mem_region(ahd->platform_data->mem_busaddr, | |
1155 | 0x1000); | |
1156 | } | |
1157 | free(ahd->platform_data, M_DEVBUF); | |
1158 | } | |
1da177e4 LT |
1159 | } |
1160 | ||
73a25462 HR |
1161 | void |
1162 | ahd_platform_init(struct ahd_softc *ahd) | |
1da177e4 | 1163 | { |
73a25462 HR |
1164 | /* |
1165 | * Lookup and commit any modified IO Cell options. | |
1166 | */ | |
1167 | if (ahd->unit < NUM_ELEMENTS(aic79xx_iocell_info)) { | |
1168 | struct ahd_linux_iocell_opts *iocell_opts; | |
1da177e4 | 1169 | |
73a25462 HR |
1170 | iocell_opts = &aic79xx_iocell_info[ahd->unit]; |
1171 | if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP) | |
1172 | AHD_SET_PRECOMP(ahd, iocell_opts->precomp); | |
1173 | if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE) | |
1174 | AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate); | |
1175 | if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE) | |
1176 | AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude); | |
1da177e4 | 1177 | } |
1da177e4 | 1178 | |
1da177e4 LT |
1179 | } |
1180 | ||
73a25462 HR |
1181 | void |
1182 | ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb) | |
1da177e4 | 1183 | { |
73a25462 HR |
1184 | ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), |
1185 | SCB_GET_CHANNEL(ahd, scb), | |
1186 | SCB_GET_LUN(scb), SCB_LIST_NULL, | |
1187 | ROLE_UNKNOWN, CAM_REQUEUE_REQ); | |
1da177e4 LT |
1188 | } |
1189 | ||
73a25462 HR |
1190 | void |
1191 | ahd_platform_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, | |
1192 | ahd_queue_alg alg) | |
1da177e4 | 1193 | { |
73a25462 HR |
1194 | struct scsi_target *starget; |
1195 | struct ahd_linux_target *targ; | |
1196 | struct ahd_linux_device *dev; | |
1197 | struct scsi_device *sdev; | |
1198 | int was_queuing; | |
1199 | int now_queuing; | |
1da177e4 | 1200 | |
73a25462 HR |
1201 | starget = ahd->platform_data->starget[devinfo->target]; |
1202 | targ = scsi_transport_target_data(starget); | |
1203 | BUG_ON(targ == NULL); | |
1204 | sdev = targ->sdev[devinfo->lun]; | |
1205 | if (sdev == NULL) | |
1206 | return; | |
1da177e4 | 1207 | |
73a25462 | 1208 | dev = scsi_transport_device_data(sdev); |
1da177e4 | 1209 | |
73a25462 HR |
1210 | if (dev == NULL) |
1211 | return; | |
1212 | was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED); | |
1213 | switch (alg) { | |
1214 | default: | |
1215 | case AHD_QUEUE_NONE: | |
1216 | now_queuing = 0; | |
1217 | break; | |
1218 | case AHD_QUEUE_BASIC: | |
1219 | now_queuing = AHD_DEV_Q_BASIC; | |
1220 | break; | |
1221 | case AHD_QUEUE_TAGGED: | |
1222 | now_queuing = AHD_DEV_Q_TAGGED; | |
1223 | break; | |
1224 | } | |
1225 | if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0 | |
1226 | && (was_queuing != now_queuing) | |
1227 | && (dev->active != 0)) { | |
1228 | dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY; | |
1229 | dev->qfrozen++; | |
1da177e4 | 1230 | } |
1da177e4 | 1231 | |
73a25462 HR |
1232 | dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG); |
1233 | if (now_queuing) { | |
1234 | u_int usertags; | |
1da177e4 | 1235 | |
73a25462 HR |
1236 | usertags = ahd_linux_user_tagdepth(ahd, devinfo); |
1237 | if (!was_queuing) { | |
1238 | /* | |
1239 | * Start out agressively and allow our | |
1240 | * dynamic queue depth algorithm to take | |
1241 | * care of the rest. | |
1242 | */ | |
1243 | dev->maxtags = usertags; | |
1244 | dev->openings = dev->maxtags - dev->active; | |
1da177e4 | 1245 | } |
73a25462 HR |
1246 | if (dev->maxtags == 0) { |
1247 | /* | |
1248 | * Queueing is disabled by the user. | |
1249 | */ | |
1250 | dev->openings = 1; | |
1251 | } else if (alg == AHD_QUEUE_TAGGED) { | |
1252 | dev->flags |= AHD_DEV_Q_TAGGED; | |
1253 | if (aic79xx_periodic_otag != 0) | |
1254 | dev->flags |= AHD_DEV_PERIODIC_OTAG; | |
1255 | } else | |
1256 | dev->flags |= AHD_DEV_Q_BASIC; | |
1257 | } else { | |
1258 | /* We can only have one opening. */ | |
1259 | dev->maxtags = 0; | |
1260 | dev->openings = 1 - dev->active; | |
1da177e4 | 1261 | } |
1da177e4 | 1262 | |
73a25462 HR |
1263 | switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) { |
1264 | case AHD_DEV_Q_BASIC: | |
1265 | scsi_adjust_queue_depth(sdev, | |
1266 | MSG_SIMPLE_TASK, | |
1267 | dev->openings + dev->active); | |
1268 | break; | |
1269 | case AHD_DEV_Q_TAGGED: | |
1270 | scsi_adjust_queue_depth(sdev, | |
1271 | MSG_ORDERED_TASK, | |
1272 | dev->openings + dev->active); | |
1273 | break; | |
1274 | default: | |
1da177e4 | 1275 | /* |
73a25462 HR |
1276 | * We allow the OS to queue 2 untagged transactions to |
1277 | * us at any time even though we can only execute them | |
1278 | * serially on the controller/device. This should | |
1279 | * remove some latency. | |
1da177e4 | 1280 | */ |
73a25462 HR |
1281 | scsi_adjust_queue_depth(sdev, |
1282 | /*NON-TAGGED*/0, | |
1283 | /*queue depth*/2); | |
1284 | break; | |
1da177e4 | 1285 | } |
1da177e4 LT |
1286 | } |
1287 | ||
73a25462 HR |
1288 | int |
1289 | ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel, | |
1290 | int lun, u_int tag, role_t role, uint32_t status) | |
1da177e4 | 1291 | { |
73a25462 | 1292 | return 0; |
1da177e4 LT |
1293 | } |
1294 | ||
73a25462 HR |
1295 | static u_int |
1296 | ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) | |
1da177e4 | 1297 | { |
73a25462 HR |
1298 | static int warned_user; |
1299 | u_int tags; | |
1da177e4 | 1300 | |
73a25462 HR |
1301 | tags = 0; |
1302 | if ((ahd->user_discenable & devinfo->target_mask) != 0) { | |
1303 | if (ahd->unit >= NUM_ELEMENTS(aic79xx_tag_info)) { | |
1304 | ||
1305 | if (warned_user == 0) { | |
1306 | printf(KERN_WARNING | |
1307 | "aic79xx: WARNING: Insufficient tag_info instances\n" | |
1308 | "aic79xx: for installed controllers. Using defaults\n" | |
1309 | "aic79xx: Please update the aic79xx_tag_info array in\n" | |
1310 | "aic79xx: the aic79xx_osm.c source file.\n"); | |
1311 | warned_user++; | |
1312 | } | |
1313 | tags = AHD_MAX_QUEUE; | |
1314 | } else { | |
1315 | adapter_tag_info_t *tag_info; | |
1316 | ||
1317 | tag_info = &aic79xx_tag_info[ahd->unit]; | |
1318 | tags = tag_info->tag_commands[devinfo->target_offset]; | |
1319 | if (tags > AHD_MAX_QUEUE) | |
1320 | tags = AHD_MAX_QUEUE; | |
1da177e4 LT |
1321 | } |
1322 | } | |
73a25462 | 1323 | return (tags); |
1da177e4 LT |
1324 | } |
1325 | ||
1326 | /* | |
73a25462 | 1327 | * Determines the queue depth for a given device. |
1da177e4 LT |
1328 | */ |
1329 | static void | |
73a25462 | 1330 | ahd_linux_device_queue_depth(struct scsi_device *sdev) |
1da177e4 | 1331 | { |
73a25462 HR |
1332 | struct ahd_devinfo devinfo; |
1333 | u_int tags; | |
1334 | struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata); | |
1da177e4 | 1335 | |
73a25462 HR |
1336 | ahd_compile_devinfo(&devinfo, |
1337 | ahd->our_id, | |
1338 | sdev->sdev_target->id, sdev->lun, | |
1339 | sdev->sdev_target->channel == 0 ? 'A' : 'B', | |
1340 | ROLE_INITIATOR); | |
1341 | tags = ahd_linux_user_tagdepth(ahd, &devinfo); | |
1342 | if (tags != 0 && sdev->tagged_supported != 0) { | |
1da177e4 | 1343 | |
73a25462 HR |
1344 | ahd_set_tags(ahd, &devinfo, AHD_QUEUE_TAGGED); |
1345 | ahd_print_devinfo(ahd, &devinfo); | |
1346 | printf("Tagged Queuing enabled. Depth %d\n", tags); | |
1347 | } else { | |
1348 | ahd_set_tags(ahd, &devinfo, AHD_QUEUE_NONE); | |
1349 | } | |
1350 | } | |
1da177e4 | 1351 | |
73a25462 HR |
1352 | static int |
1353 | ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev, | |
1354 | struct scsi_cmnd *cmd) | |
1355 | { | |
1356 | struct scb *scb; | |
1357 | struct hardware_scb *hscb; | |
1358 | struct ahd_initiator_tinfo *tinfo; | |
1359 | struct ahd_tmode_tstate *tstate; | |
1360 | u_int col_idx; | |
1361 | uint16_t mask; | |
1da177e4 LT |
1362 | |
1363 | /* | |
73a25462 | 1364 | * Get an scb to use. |
1da177e4 | 1365 | */ |
73a25462 HR |
1366 | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, |
1367 | cmd->device->id, &tstate); | |
1368 | if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0 | |
1369 | || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { | |
1370 | col_idx = AHD_NEVER_COL_IDX; | |
1371 | } else { | |
1372 | col_idx = AHD_BUILD_COL_IDX(cmd->device->id, | |
1373 | cmd->device->lun); | |
1374 | } | |
1375 | if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) { | |
1376 | ahd->flags |= AHD_RESOURCE_SHORTAGE; | |
1377 | return SCSI_MLQUEUE_HOST_BUSY; | |
1da177e4 | 1378 | } |
1da177e4 | 1379 | |
73a25462 HR |
1380 | scb->io_ctx = cmd; |
1381 | scb->platform_data->dev = dev; | |
1382 | hscb = scb->hscb; | |
1383 | cmd->host_scribble = (char *)scb; | |
1da177e4 | 1384 | |
73a25462 HR |
1385 | /* |
1386 | * Fill out basics of the HSCB. | |
1387 | */ | |
1388 | hscb->control = 0; | |
1389 | hscb->scsiid = BUILD_SCSIID(ahd, cmd); | |
1390 | hscb->lun = cmd->device->lun; | |
1391 | scb->hscb->task_management = 0; | |
1392 | mask = SCB_GET_TARGET_MASK(ahd, scb); | |
1da177e4 | 1393 | |
73a25462 HR |
1394 | if ((ahd->user_discenable & mask) != 0) |
1395 | hscb->control |= DISCENB; | |
1da177e4 | 1396 | |
73a25462 HR |
1397 | if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) |
1398 | scb->flags |= SCB_PACKETIZED; | |
1da177e4 | 1399 | |
73a25462 HR |
1400 | if ((tstate->auto_negotiate & mask) != 0) { |
1401 | scb->flags |= SCB_AUTO_NEGOTIATE; | |
1402 | scb->hscb->control |= MK_MESSAGE; | |
1403 | } | |
1404 | ||
1405 | if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) { | |
1406 | int msg_bytes; | |
1407 | uint8_t tag_msgs[2]; | |
1408 | ||
1409 | msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); | |
1410 | if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { | |
1411 | hscb->control |= tag_msgs[0]; | |
1412 | if (tag_msgs[0] == MSG_ORDERED_TASK) | |
1413 | dev->commands_since_idle_or_otag = 0; | |
1414 | } else | |
1415 | if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH | |
1416 | && (dev->flags & AHD_DEV_Q_TAGGED) != 0) { | |
1417 | hscb->control |= MSG_ORDERED_TASK; | |
1418 | dev->commands_since_idle_or_otag = 0; | |
1419 | } else { | |
1420 | hscb->control |= MSG_SIMPLE_TASK; | |
1da177e4 | 1421 | } |
73a25462 | 1422 | } |
1da177e4 | 1423 | |
73a25462 HR |
1424 | hscb->cdb_len = cmd->cmd_len; |
1425 | memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len); | |
1426 | ||
1427 | scb->platform_data->xfer_len = 0; | |
1428 | ahd_set_residual(scb, 0); | |
1429 | ahd_set_sense_residual(scb, 0); | |
1430 | scb->sg_count = 0; | |
1431 | if (cmd->use_sg != 0) { | |
1432 | void *sg; | |
1433 | struct scatterlist *cur_seg; | |
1434 | u_int nseg; | |
1435 | int dir; | |
1436 | ||
1437 | cur_seg = (struct scatterlist *)cmd->request_buffer; | |
1438 | dir = cmd->sc_data_direction; | |
1439 | nseg = pci_map_sg(ahd->dev_softc, cur_seg, | |
1440 | cmd->use_sg, dir); | |
1441 | scb->platform_data->xfer_len = 0; | |
1442 | for (sg = scb->sg_list; nseg > 0; nseg--, cur_seg++) { | |
1443 | dma_addr_t addr; | |
1444 | bus_size_t len; | |
1445 | ||
1446 | addr = sg_dma_address(cur_seg); | |
1447 | len = sg_dma_len(cur_seg); | |
1448 | scb->platform_data->xfer_len += len; | |
1449 | sg = ahd_sg_setup(ahd, scb, sg, addr, len, | |
1450 | /*last*/nseg == 1); | |
1da177e4 | 1451 | } |
73a25462 HR |
1452 | } else if (cmd->request_bufflen != 0) { |
1453 | void *sg; | |
1454 | dma_addr_t addr; | |
1455 | int dir; | |
1456 | ||
1457 | sg = scb->sg_list; | |
1458 | dir = cmd->sc_data_direction; | |
1459 | addr = pci_map_single(ahd->dev_softc, | |
1460 | cmd->request_buffer, | |
1461 | cmd->request_bufflen, dir); | |
1462 | scb->platform_data->xfer_len = cmd->request_bufflen; | |
1463 | scb->platform_data->buf_busaddr = addr; | |
1464 | sg = ahd_sg_setup(ahd, scb, sg, addr, | |
1465 | cmd->request_bufflen, /*last*/TRUE); | |
1da177e4 | 1466 | } |
73a25462 HR |
1467 | |
1468 | LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links); | |
1469 | dev->openings--; | |
1470 | dev->active++; | |
1471 | dev->commands_issued++; | |
1472 | ||
1473 | if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0) | |
1474 | dev->commands_since_idle_or_otag++; | |
1475 | scb->flags |= SCB_ACTIVE; | |
1476 | ahd_queue_scb(ahd, scb); | |
1477 | ||
1478 | return 0; | |
1da177e4 LT |
1479 | } |
1480 | ||
73a25462 HR |
1481 | /* |
1482 | * SCSI controller interrupt handler. | |
1483 | */ | |
1484 | irqreturn_t | |
1485 | ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs) | |
1da177e4 | 1486 | { |
73a25462 HR |
1487 | struct ahd_softc *ahd; |
1488 | u_long flags; | |
1489 | int ours; | |
1da177e4 | 1490 | |
73a25462 HR |
1491 | ahd = (struct ahd_softc *) dev_id; |
1492 | ahd_lock(ahd, &flags); | |
1493 | ours = ahd_intr(ahd); | |
1494 | ahd_unlock(ahd, &flags); | |
1495 | return IRQ_RETVAL(ours); | |
1da177e4 LT |
1496 | } |
1497 | ||
1498 | void | |
73a25462 | 1499 | ahd_platform_flushwork(struct ahd_softc *ahd) |
1da177e4 | 1500 | { |
73a25462 | 1501 | |
1da177e4 LT |
1502 | } |
1503 | ||
1504 | void | |
73a25462 HR |
1505 | ahd_send_async(struct ahd_softc *ahd, char channel, |
1506 | u_int target, u_int lun, ac_code code, void *arg) | |
1da177e4 | 1507 | { |
73a25462 HR |
1508 | switch (code) { |
1509 | case AC_TRANSFER_NEG: | |
1510 | { | |
1511 | char buf[80]; | |
1512 | struct scsi_target *starget; | |
1513 | struct ahd_linux_target *targ; | |
1514 | struct info_str info; | |
1515 | struct ahd_initiator_tinfo *tinfo; | |
1516 | struct ahd_tmode_tstate *tstate; | |
1517 | unsigned int target_ppr_options; | |
1da177e4 | 1518 | |
73a25462 HR |
1519 | BUG_ON(target == CAM_TARGET_WILDCARD); |
1520 | ||
1521 | info.buffer = buf; | |
1522 | info.length = sizeof(buf); | |
1523 | info.offset = 0; | |
1524 | info.pos = 0; | |
1525 | tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id, | |
1526 | target, &tstate); | |
1527 | ||
1528 | /* | |
1529 | * Don't bother reporting results while | |
1530 | * negotiations are still pending. | |
1531 | */ | |
1532 | if (tinfo->curr.period != tinfo->goal.period | |
1533 | || tinfo->curr.width != tinfo->goal.width | |
1534 | || tinfo->curr.offset != tinfo->goal.offset | |
1535 | || tinfo->curr.ppr_options != tinfo->goal.ppr_options) | |
1536 | if (bootverbose == 0) | |
1537 | break; | |
1538 | ||
1539 | /* | |
1540 | * Don't bother reporting results that | |
1541 | * are identical to those last reported. | |
1542 | */ | |
1543 | starget = ahd->platform_data->starget[target]; | |
fc789a93 | 1544 | if (starget == NULL) |
73a25462 | 1545 | break; |
fc789a93 | 1546 | targ = scsi_transport_target_data(starget); |
73a25462 HR |
1547 | |
1548 | target_ppr_options = | |
1549 | (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0) | |
1550 | + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0) | |
3f40d7d6 JB |
1551 | + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0) |
1552 | + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0) | |
1553 | + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0) | |
1554 | + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0) | |
88ff29a4 JB |
1555 | + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0) |
1556 | + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0); | |
73a25462 HR |
1557 | |
1558 | if (tinfo->curr.period == spi_period(starget) | |
1559 | && tinfo->curr.width == spi_width(starget) | |
1560 | && tinfo->curr.offset == spi_offset(starget) | |
1561 | && tinfo->curr.ppr_options == target_ppr_options) | |
1562 | if (bootverbose == 0) | |
1563 | break; | |
1564 | ||
1565 | spi_period(starget) = tinfo->curr.period; | |
1566 | spi_width(starget) = tinfo->curr.width; | |
1567 | spi_offset(starget) = tinfo->curr.offset; | |
a4b53a11 HR |
1568 | spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0; |
1569 | spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0; | |
1570 | spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0; | |
3f40d7d6 JB |
1571 | spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0; |
1572 | spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0; | |
1573 | spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0; | |
1574 | spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0; | |
88ff29a4 | 1575 | spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0; |
73a25462 | 1576 | spi_display_xfer_agreement(starget); |
1da177e4 | 1577 | break; |
73a25462 HR |
1578 | } |
1579 | case AC_SENT_BDR: | |
1580 | { | |
1581 | WARN_ON(lun != CAM_LUN_WILDCARD); | |
1582 | scsi_report_device_reset(ahd->platform_data->host, | |
1583 | channel - 'A', target); | |
1da177e4 LT |
1584 | break; |
1585 | } | |
73a25462 HR |
1586 | case AC_BUS_RESET: |
1587 | if (ahd->platform_data->host != NULL) { | |
1588 | scsi_report_bus_reset(ahd->platform_data->host, | |
1589 | channel - 'A'); | |
1da177e4 | 1590 | } |
73a25462 HR |
1591 | break; |
1592 | default: | |
1593 | panic("ahd_send_async: Unexpected async event"); | |
1594 | } | |
1da177e4 LT |
1595 | } |
1596 | ||
73a25462 HR |
1597 | /* |
1598 | * Calls the higher level scsi done function and frees the scb. | |
1599 | */ | |
1600 | void | |
1601 | ahd_done(struct ahd_softc *ahd, struct scb *scb) | |
1da177e4 | 1602 | { |
73a25462 HR |
1603 | struct scsi_cmnd *cmd; |
1604 | struct ahd_linux_device *dev; | |
1da177e4 | 1605 | |
73a25462 HR |
1606 | if ((scb->flags & SCB_ACTIVE) == 0) { |
1607 | printf("SCB %d done'd twice\n", SCB_GET_TAG(scb)); | |
1608 | ahd_dump_card_state(ahd); | |
1609 | panic("Stopping for safety"); | |
1da177e4 | 1610 | } |
73a25462 HR |
1611 | LIST_REMOVE(scb, pending_links); |
1612 | cmd = scb->io_ctx; | |
1613 | dev = scb->platform_data->dev; | |
1614 | dev->active--; | |
1615 | dev->openings++; | |
1616 | if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) { | |
1617 | cmd->result &= ~(CAM_DEV_QFRZN << 16); | |
1618 | dev->qfrozen--; | |
1619 | } | |
1620 | ahd_linux_unmap_scb(ahd, scb); | |
1da177e4 LT |
1621 | |
1622 | /* | |
73a25462 HR |
1623 | * Guard against stale sense data. |
1624 | * The Linux mid-layer assumes that sense | |
1625 | * was retrieved anytime the first byte of | |
1626 | * the sense buffer looks "sane". | |
1da177e4 | 1627 | */ |
73a25462 HR |
1628 | cmd->sense_buffer[0] = 0; |
1629 | if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) { | |
1630 | uint32_t amount_xferred; | |
1da177e4 | 1631 | |
73a25462 HR |
1632 | amount_xferred = |
1633 | ahd_get_transfer_length(scb) - ahd_get_residual(scb); | |
1634 | if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) { | |
1da177e4 | 1635 | #ifdef AHD_DEBUG |
73a25462 HR |
1636 | if ((ahd_debug & AHD_SHOW_MISC) != 0) { |
1637 | ahd_print_path(ahd, scb); | |
1638 | printf("Set CAM_UNCOR_PARITY\n"); | |
1639 | } | |
1da177e4 | 1640 | #endif |
73a25462 HR |
1641 | ahd_set_transaction_status(scb, CAM_UNCOR_PARITY); |
1642 | #ifdef AHD_REPORT_UNDERFLOWS | |
1da177e4 | 1643 | /* |
73a25462 HR |
1644 | * This code is disabled by default as some |
1645 | * clients of the SCSI system do not properly | |
1646 | * initialize the underflow parameter. This | |
1647 | * results in spurious termination of commands | |
1648 | * that complete as expected (e.g. underflow is | |
1649 | * allowed as command can return variable amounts | |
1650 | * of data. | |
1da177e4 | 1651 | */ |
73a25462 HR |
1652 | } else if (amount_xferred < scb->io_ctx->underflow) { |
1653 | u_int i; | |
1da177e4 | 1654 | |
73a25462 HR |
1655 | ahd_print_path(ahd, scb); |
1656 | printf("CDB:"); | |
1657 | for (i = 0; i < scb->io_ctx->cmd_len; i++) | |
1658 | printf(" 0x%x", scb->io_ctx->cmnd[i]); | |
1659 | printf("\n"); | |
1660 | ahd_print_path(ahd, scb); | |
1661 | printf("Saw underflow (%ld of %ld bytes). " | |
1662 | "Treated as error\n", | |
1663 | ahd_get_residual(scb), | |
1664 | ahd_get_transfer_length(scb)); | |
1665 | ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); | |
1666 | #endif | |
1667 | } else { | |
1668 | ahd_set_transaction_status(scb, CAM_REQ_CMP); | |
1da177e4 | 1669 | } |
73a25462 HR |
1670 | } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) { |
1671 | ahd_linux_handle_scsi_status(ahd, cmd->device, scb); | |
1672 | } | |
1da177e4 | 1673 | |
73a25462 HR |
1674 | if (dev->openings == 1 |
1675 | && ahd_get_transaction_status(scb) == CAM_REQ_CMP | |
1676 | && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL) | |
1677 | dev->tag_success_count++; | |
1678 | /* | |
1679 | * Some devices deal with temporary internal resource | |
1680 | * shortages by returning queue full. When the queue | |
1681 | * full occurrs, we throttle back. Slowly try to get | |
1682 | * back to our previous queue depth. | |
1683 | */ | |
1684 | if ((dev->openings + dev->active) < dev->maxtags | |
1685 | && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) { | |
1686 | dev->tag_success_count = 0; | |
1687 | dev->openings++; | |
1688 | } | |
1da177e4 | 1689 | |
73a25462 HR |
1690 | if (dev->active == 0) |
1691 | dev->commands_since_idle_or_otag = 0; | |
1da177e4 | 1692 | |
73a25462 HR |
1693 | if ((scb->flags & SCB_RECOVERY_SCB) != 0) { |
1694 | printf("Recovery SCB completes\n"); | |
1695 | if (ahd_get_transaction_status(scb) == CAM_BDR_SENT | |
1696 | || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED) | |
1697 | ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT); | |
1698 | if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) { | |
1699 | ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM; | |
1700 | up(&ahd->platform_data->eh_sem); | |
1701 | } | |
1da177e4 | 1702 | } |
73a25462 HR |
1703 | |
1704 | ahd_free_scb(ahd, scb); | |
1705 | ahd_linux_queue_cmd_complete(ahd, cmd); | |
1da177e4 LT |
1706 | } |
1707 | ||
1708 | static void | |
73a25462 HR |
1709 | ahd_linux_handle_scsi_status(struct ahd_softc *ahd, |
1710 | struct scsi_device *sdev, struct scb *scb) | |
1da177e4 | 1711 | { |
73a25462 HR |
1712 | struct ahd_devinfo devinfo; |
1713 | struct ahd_linux_device *dev = scsi_transport_device_data(sdev); | |
1da177e4 | 1714 | |
73a25462 HR |
1715 | ahd_compile_devinfo(&devinfo, |
1716 | ahd->our_id, | |
1717 | sdev->sdev_target->id, sdev->lun, | |
1718 | sdev->sdev_target->channel == 0 ? 'A' : 'B', | |
1719 | ROLE_INITIATOR); | |
1720 | ||
1721 | /* | |
1722 | * We don't currently trust the mid-layer to | |
1723 | * properly deal with queue full or busy. So, | |
1724 | * when one occurs, we tell the mid-layer to | |
1725 | * unconditionally requeue the command to us | |
1726 | * so that we can retry it ourselves. We also | |
1727 | * implement our own throttling mechanism so | |
1728 | * we don't clobber the device with too many | |
1729 | * commands. | |
1730 | */ | |
1731 | switch (ahd_get_scsi_status(scb)) { | |
1732 | default: | |
1733 | break; | |
1734 | case SCSI_STATUS_CHECK_COND: | |
1735 | case SCSI_STATUS_CMD_TERMINATED: | |
1736 | { | |
1737 | struct scsi_cmnd *cmd; | |
1da177e4 LT |
1738 | |
1739 | /* | |
73a25462 HR |
1740 | * Copy sense information to the OS's cmd |
1741 | * structure if it is available. | |
1da177e4 | 1742 | */ |
73a25462 HR |
1743 | cmd = scb->io_ctx; |
1744 | if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) { | |
1745 | struct scsi_status_iu_header *siu; | |
1746 | u_int sense_size; | |
1747 | u_int sense_offset; | |
1da177e4 | 1748 | |
73a25462 HR |
1749 | if (scb->flags & SCB_SENSE) { |
1750 | sense_size = MIN(sizeof(struct scsi_sense_data) | |
1751 | - ahd_get_sense_residual(scb), | |
1752 | sizeof(cmd->sense_buffer)); | |
1753 | sense_offset = 0; | |
1754 | } else { | |
1755 | /* | |
1756 | * Copy only the sense data into the provided | |
1757 | * buffer. | |
1758 | */ | |
1759 | siu = (struct scsi_status_iu_header *) | |
1760 | scb->sense_data; | |
1761 | sense_size = MIN(scsi_4btoul(siu->sense_length), | |
1762 | sizeof(cmd->sense_buffer)); | |
1763 | sense_offset = SIU_SENSE_OFFSET(siu); | |
1764 | } | |
1da177e4 | 1765 | |
73a25462 HR |
1766 | memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); |
1767 | memcpy(cmd->sense_buffer, | |
1768 | ahd_get_sense_buf(ahd, scb) | |
1769 | + sense_offset, sense_size); | |
1770 | cmd->result |= (DRIVER_SENSE << 24); | |
1da177e4 | 1771 | |
1da177e4 | 1772 | #ifdef AHD_DEBUG |
73a25462 HR |
1773 | if (ahd_debug & AHD_SHOW_SENSE) { |
1774 | int i; | |
1da177e4 | 1775 | |
73a25462 HR |
1776 | printf("Copied %d bytes of sense data at %d:", |
1777 | sense_size, sense_offset); | |
1778 | for (i = 0; i < sense_size; i++) { | |
1da177e4 | 1779 | if ((i & 0xF) == 0) |
73a25462 HR |
1780 | printf("\n"); |
1781 | printf("0x%x ", cmd->sense_buffer[i]); | |
1da177e4 LT |
1782 | } |
1783 | printf("\n"); | |
1784 | } | |
1785 | #endif | |
1da177e4 LT |
1786 | } |
1787 | break; | |
73a25462 HR |
1788 | } |
1789 | case SCSI_STATUS_QUEUE_FULL: | |
1790 | /* | |
1791 | * By the time the core driver has returned this | |
1792 | * command, all other commands that were queued | |
1793 | * to us but not the device have been returned. | |
1794 | * This ensures that dev->active is equal to | |
1795 | * the number of commands actually queued to | |
1796 | * the device. | |
1797 | */ | |
1798 | dev->tag_success_count = 0; | |
1799 | if (dev->active != 0) { | |
1da177e4 | 1800 | /* |
73a25462 HR |
1801 | * Drop our opening count to the number |
1802 | * of commands currently outstanding. | |
1da177e4 | 1803 | */ |
73a25462 | 1804 | dev->openings = 0; |
1da177e4 | 1805 | #ifdef AHD_DEBUG |
73a25462 HR |
1806 | if ((ahd_debug & AHD_SHOW_QFULL) != 0) { |
1807 | ahd_print_path(ahd, scb); | |
1808 | printf("Dropping tag count to %d\n", | |
1809 | dev->active); | |
1da177e4 LT |
1810 | } |
1811 | #endif | |
73a25462 | 1812 | if (dev->active == dev->tags_on_last_queuefull) { |
1da177e4 | 1813 | |
73a25462 | 1814 | dev->last_queuefull_same_count++; |
1da177e4 | 1815 | /* |
73a25462 HR |
1816 | * If we repeatedly see a queue full |
1817 | * at the same queue depth, this | |
1818 | * device has a fixed number of tag | |
1819 | * slots. Lock in this tag depth | |
1820 | * so we stop seeing queue fulls from | |
1821 | * this device. | |
1da177e4 | 1822 | */ |
73a25462 HR |
1823 | if (dev->last_queuefull_same_count |
1824 | == AHD_LOCK_TAGS_COUNT) { | |
1825 | dev->maxtags = dev->active; | |
1826 | ahd_print_path(ahd, scb); | |
1827 | printf("Locking max tag count at %d\n", | |
1828 | dev->active); | |
1da177e4 | 1829 | } |
73a25462 HR |
1830 | } else { |
1831 | dev->tags_on_last_queuefull = dev->active; | |
1832 | dev->last_queuefull_same_count = 0; | |
1da177e4 | 1833 | } |
73a25462 HR |
1834 | ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); |
1835 | ahd_set_scsi_status(scb, SCSI_STATUS_OK); | |
1836 | ahd_platform_set_tags(ahd, &devinfo, | |
1837 | (dev->flags & AHD_DEV_Q_BASIC) | |
1838 | ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); | |
1da177e4 LT |
1839 | break; |
1840 | } | |
1da177e4 | 1841 | /* |
73a25462 HR |
1842 | * Drop down to a single opening, and treat this |
1843 | * as if the target returned BUSY SCSI status. | |
1da177e4 | 1844 | */ |
73a25462 HR |
1845 | dev->openings = 1; |
1846 | ahd_platform_set_tags(ahd, &devinfo, | |
1847 | (dev->flags & AHD_DEV_Q_BASIC) | |
1848 | ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); | |
1849 | ahd_set_scsi_status(scb, SCSI_STATUS_BUSY); | |
1850 | } | |
1da177e4 LT |
1851 | } |
1852 | ||
73a25462 HR |
1853 | static void |
1854 | ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd) | |
1da177e4 | 1855 | { |
1da177e4 | 1856 | /* |
73a25462 HR |
1857 | * Map CAM error codes into Linux Error codes. We |
1858 | * avoid the conversion so that the DV code has the | |
1859 | * full error information available when making | |
1860 | * state change decisions. | |
1da177e4 | 1861 | */ |
73a25462 HR |
1862 | { |
1863 | uint32_t status; | |
1864 | u_int new_status; | |
1da177e4 | 1865 | |
73a25462 HR |
1866 | status = ahd_cmd_get_transaction_status(cmd); |
1867 | switch (status) { | |
1868 | case CAM_REQ_INPROG: | |
1869 | case CAM_REQ_CMP: | |
1870 | case CAM_SCSI_STATUS_ERROR: | |
1871 | new_status = DID_OK; | |
1872 | break; | |
1873 | case CAM_REQ_ABORTED: | |
1874 | new_status = DID_ABORT; | |
1875 | break; | |
1876 | case CAM_BUSY: | |
1877 | new_status = DID_BUS_BUSY; | |
1878 | break; | |
1879 | case CAM_REQ_INVALID: | |
1880 | case CAM_PATH_INVALID: | |
1881 | new_status = DID_BAD_TARGET; | |
1882 | break; | |
1883 | case CAM_SEL_TIMEOUT: | |
1884 | new_status = DID_NO_CONNECT; | |
1885 | break; | |
1886 | case CAM_SCSI_BUS_RESET: | |
1887 | case CAM_BDR_SENT: | |
1888 | new_status = DID_RESET; | |
1889 | break; | |
1890 | case CAM_UNCOR_PARITY: | |
1891 | new_status = DID_PARITY; | |
1892 | break; | |
1893 | case CAM_CMD_TIMEOUT: | |
1894 | new_status = DID_TIME_OUT; | |
1895 | break; | |
1896 | case CAM_UA_ABORT: | |
1897 | case CAM_REQ_CMP_ERR: | |
1898 | case CAM_AUTOSENSE_FAIL: | |
1899 | case CAM_NO_HBA: | |
1900 | case CAM_DATA_RUN_ERR: | |
1901 | case CAM_UNEXP_BUSFREE: | |
1902 | case CAM_SEQUENCE_FAIL: | |
1903 | case CAM_CCB_LEN_ERR: | |
1904 | case CAM_PROVIDE_FAIL: | |
1905 | case CAM_REQ_TERMIO: | |
1906 | case CAM_UNREC_HBA_ERROR: | |
1907 | case CAM_REQ_TOO_BIG: | |
1908 | new_status = DID_ERROR; | |
1909 | break; | |
1910 | case CAM_REQUEUE_REQ: | |
1911 | new_status = DID_REQUEUE; | |
1912 | break; | |
1913 | default: | |
1914 | /* We should never get here */ | |
1915 | new_status = DID_ERROR; | |
1916 | break; | |
1917 | } | |
1918 | ||
1919 | ahd_cmd_set_transaction_status(cmd, new_status); | |
1920 | } | |
1921 | ||
1922 | cmd->scsi_done(cmd); | |
1da177e4 LT |
1923 | } |
1924 | ||
1925 | static void | |
73a25462 | 1926 | ahd_linux_sem_timeout(u_long arg) |
1da177e4 | 1927 | { |
73a25462 HR |
1928 | struct ahd_softc *ahd; |
1929 | u_long s; | |
1da177e4 | 1930 | |
73a25462 HR |
1931 | ahd = (struct ahd_softc *)arg; |
1932 | ||
1933 | ahd_lock(ahd, &s); | |
1934 | if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) { | |
1935 | ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM; | |
1936 | up(&ahd->platform_data->eh_sem); | |
1937 | } | |
1938 | ahd_unlock(ahd, &s); | |
1da177e4 LT |
1939 | } |
1940 | ||
1941 | void | |
73a25462 | 1942 | ahd_freeze_simq(struct ahd_softc *ahd) |
1da177e4 | 1943 | { |
73a25462 HR |
1944 | ahd->platform_data->qfrozen++; |
1945 | if (ahd->platform_data->qfrozen == 1) { | |
1946 | scsi_block_requests(ahd->platform_data->host); | |
1947 | ahd_platform_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, | |
1948 | CAM_LUN_WILDCARD, SCB_LIST_NULL, | |
1949 | ROLE_INITIATOR, CAM_REQUEUE_REQ); | |
1da177e4 | 1950 | } |
1da177e4 LT |
1951 | } |
1952 | ||
1da177e4 | 1953 | void |
73a25462 | 1954 | ahd_release_simq(struct ahd_softc *ahd) |
1da177e4 | 1955 | { |
73a25462 HR |
1956 | u_long s; |
1957 | int unblock_reqs; | |
1da177e4 | 1958 | |
73a25462 HR |
1959 | unblock_reqs = 0; |
1960 | ahd_lock(ahd, &s); | |
1961 | if (ahd->platform_data->qfrozen > 0) | |
1962 | ahd->platform_data->qfrozen--; | |
1963 | if (ahd->platform_data->qfrozen == 0) { | |
1964 | unblock_reqs = 1; | |
1da177e4 | 1965 | } |
73a25462 | 1966 | ahd_unlock(ahd, &s); |
1da177e4 | 1967 | /* |
73a25462 HR |
1968 | * There is still a race here. The mid-layer |
1969 | * should keep its own freeze count and use | |
1970 | * a bottom half handler to run the queues | |
1971 | * so we can unblock with our own lock held. | |
1da177e4 | 1972 | */ |
73a25462 HR |
1973 | if (unblock_reqs) |
1974 | scsi_unblock_requests(ahd->platform_data->host); | |
1975 | } | |
1da177e4 | 1976 | |
73a25462 HR |
1977 | static int |
1978 | ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) | |
1979 | { | |
1980 | struct ahd_softc *ahd; | |
1981 | struct ahd_linux_device *dev; | |
1982 | struct scb *pending_scb; | |
1983 | u_int saved_scbptr; | |
1984 | u_int active_scbptr; | |
1985 | u_int last_phase; | |
1986 | u_int saved_scsiid; | |
1987 | u_int cdb_byte; | |
1988 | int retval; | |
1989 | int was_paused; | |
1990 | int paused; | |
1991 | int wait; | |
1992 | int disconnected; | |
1993 | ahd_mode_state saved_modes; | |
1994 | ||
1995 | pending_scb = NULL; | |
1996 | paused = FALSE; | |
1997 | wait = FALSE; | |
1998 | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | |
1999 | ||
2000 | printf("%s:%d:%d:%d: Attempting to queue a%s message:", | |
2001 | ahd_name(ahd), cmd->device->channel, | |
2002 | cmd->device->id, cmd->device->lun, | |
2003 | flag == SCB_ABORT ? "n ABORT" : " TARGET RESET"); | |
2004 | ||
2005 | printf("CDB:"); | |
2006 | for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++) | |
2007 | printf(" 0x%x", cmd->cmnd[cdb_byte]); | |
2008 | printf("\n"); | |
2009 | ||
2010 | spin_lock_irq(&ahd->platform_data->spin_lock); | |
1da177e4 | 2011 | |
1da177e4 | 2012 | /* |
73a25462 HR |
2013 | * First determine if we currently own this command. |
2014 | * Start by searching the device queue. If not found | |
2015 | * there, check the pending_scb list. If not found | |
2016 | * at all, and the system wanted us to just abort the | |
2017 | * command, return success. | |
1da177e4 | 2018 | */ |
73a25462 HR |
2019 | dev = scsi_transport_device_data(cmd->device); |
2020 | ||
2021 | if (dev == NULL) { | |
2022 | /* | |
2023 | * No target device for this command exists, | |
2024 | * so we must not still own the command. | |
2025 | */ | |
2026 | printf("%s:%d:%d:%d: Is not an active device\n", | |
2027 | ahd_name(ahd), cmd->device->channel, cmd->device->id, | |
2028 | cmd->device->lun); | |
2029 | retval = SUCCESS; | |
2030 | goto no_cmd; | |
2031 | } | |
1da177e4 | 2032 | |
1da177e4 | 2033 | /* |
73a25462 | 2034 | * See if we can find a matching cmd in the pending list. |
1da177e4 | 2035 | */ |
73a25462 HR |
2036 | LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { |
2037 | if (pending_scb->io_ctx == cmd) | |
2038 | break; | |
1da177e4 LT |
2039 | } |
2040 | ||
73a25462 | 2041 | if (pending_scb == NULL && flag == SCB_DEVICE_RESET) { |
1da177e4 | 2042 | |
73a25462 HR |
2043 | /* Any SCB for this device will do for a target reset */ |
2044 | LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { | |
2045 | if (ahd_match_scb(ahd, pending_scb, cmd->device->id, | |
2046 | cmd->device->channel + 'A', | |
2047 | CAM_LUN_WILDCARD, | |
2048 | SCB_LIST_NULL, ROLE_INITIATOR) == 0) | |
2049 | break; | |
1da177e4 LT |
2050 | } |
2051 | } | |
2052 | ||
73a25462 HR |
2053 | if (pending_scb == NULL) { |
2054 | printf("%s:%d:%d:%d: Command not found\n", | |
2055 | ahd_name(ahd), cmd->device->channel, cmd->device->id, | |
2056 | cmd->device->lun); | |
2057 | goto no_cmd; | |
1da177e4 | 2058 | } |
1da177e4 | 2059 | |
73a25462 HR |
2060 | if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) { |
2061 | /* | |
2062 | * We can't queue two recovery actions using the same SCB | |
2063 | */ | |
2064 | retval = FAILED; | |
2065 | goto done; | |
2066 | } | |
1da177e4 | 2067 | |
1da177e4 | 2068 | /* |
73a25462 HR |
2069 | * Ensure that the card doesn't do anything |
2070 | * behind our back. Also make sure that we | |
2071 | * didn't "just" miss an interrupt that would | |
2072 | * affect this cmd. | |
1da177e4 | 2073 | */ |
73a25462 HR |
2074 | was_paused = ahd_is_paused(ahd); |
2075 | ahd_pause_and_flushwork(ahd); | |
2076 | paused = TRUE; | |
1da177e4 | 2077 | |
73a25462 HR |
2078 | if ((pending_scb->flags & SCB_ACTIVE) == 0) { |
2079 | printf("%s:%d:%d:%d: Command already completed\n", | |
2080 | ahd_name(ahd), cmd->device->channel, cmd->device->id, | |
2081 | cmd->device->lun); | |
2082 | goto no_cmd; | |
2083 | } | |
1da177e4 | 2084 | |
73a25462 HR |
2085 | printf("%s: At time of recovery, card was %spaused\n", |
2086 | ahd_name(ahd), was_paused ? "" : "not "); | |
2087 | ahd_dump_card_state(ahd); | |
1da177e4 | 2088 | |
73a25462 HR |
2089 | disconnected = TRUE; |
2090 | if (flag == SCB_ABORT) { | |
2091 | if (ahd_search_qinfifo(ahd, cmd->device->id, | |
2092 | cmd->device->channel + 'A', | |
2093 | cmd->device->lun, | |
2094 | pending_scb->hscb->tag, | |
2095 | ROLE_INITIATOR, CAM_REQ_ABORTED, | |
2096 | SEARCH_COMPLETE) > 0) { | |
2097 | printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n", | |
2098 | ahd_name(ahd), cmd->device->channel, | |
2099 | cmd->device->id, cmd->device->lun); | |
2100 | retval = SUCCESS; | |
2101 | goto done; | |
2102 | } | |
2103 | } else if (ahd_search_qinfifo(ahd, cmd->device->id, | |
2104 | cmd->device->channel + 'A', | |
2105 | cmd->device->lun, pending_scb->hscb->tag, | |
2106 | ROLE_INITIATOR, /*status*/0, | |
2107 | SEARCH_COUNT) > 0) { | |
2108 | disconnected = FALSE; | |
2109 | } | |
1da177e4 | 2110 | |
73a25462 HR |
2111 | saved_modes = ahd_save_modes(ahd); |
2112 | ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); | |
2113 | last_phase = ahd_inb(ahd, LASTPHASE); | |
2114 | saved_scbptr = ahd_get_scbptr(ahd); | |
2115 | active_scbptr = saved_scbptr; | |
2116 | if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) { | |
2117 | struct scb *bus_scb; | |
1da177e4 | 2118 | |
73a25462 HR |
2119 | bus_scb = ahd_lookup_scb(ahd, active_scbptr); |
2120 | if (bus_scb == pending_scb) | |
2121 | disconnected = FALSE; | |
2122 | else if (flag != SCB_ABORT | |
2123 | && ahd_inb(ahd, SAVED_SCSIID) == pending_scb->hscb->scsiid | |
2124 | && ahd_inb(ahd, SAVED_LUN) == SCB_GET_LUN(pending_scb)) | |
2125 | disconnected = FALSE; | |
1da177e4 | 2126 | } |
73a25462 HR |
2127 | |
2128 | /* | |
2129 | * At this point, pending_scb is the scb associated with the | |
2130 | * passed in command. That command is currently active on the | |
2131 | * bus or is in the disconnected state. | |
2132 | */ | |
2133 | saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); | |
2134 | if (last_phase != P_BUSFREE | |
2135 | && (SCB_GET_TAG(pending_scb) == active_scbptr | |
2136 | || (flag == SCB_DEVICE_RESET | |
2137 | && SCSIID_TARGET(ahd, saved_scsiid) == cmd->device->id))) { | |
2138 | ||
1da177e4 | 2139 | /* |
73a25462 HR |
2140 | * We're active on the bus, so assert ATN |
2141 | * and hope that the target responds. | |
1da177e4 | 2142 | */ |
73a25462 HR |
2143 | pending_scb = ahd_lookup_scb(ahd, active_scbptr); |
2144 | pending_scb->flags |= SCB_RECOVERY_SCB|flag; | |
2145 | ahd_outb(ahd, MSG_OUT, HOST_MSG); | |
2146 | ahd_outb(ahd, SCSISIGO, last_phase|ATNO); | |
2147 | printf("%s:%d:%d:%d: Device is active, asserting ATN\n", | |
2148 | ahd_name(ahd), cmd->device->channel, | |
2149 | cmd->device->id, cmd->device->lun); | |
2150 | wait = TRUE; | |
2151 | } else if (disconnected) { | |
2152 | ||
2153 | /* | |
2154 | * Actually re-queue this SCB in an attempt | |
2155 | * to select the device before it reconnects. | |
2156 | */ | |
2157 | pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT; | |
2158 | ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb)); | |
2159 | pending_scb->hscb->cdb_len = 0; | |
2160 | pending_scb->hscb->task_attribute = 0; | |
2161 | pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; | |
2162 | ||
2163 | if ((pending_scb->flags & SCB_PACKETIZED) != 0) { | |
1da177e4 | 2164 | /* |
73a25462 HR |
2165 | * Mark the SCB has having an outstanding |
2166 | * task management function. Should the command | |
2167 | * complete normally before the task management | |
2168 | * function can be sent, the host will be notified | |
2169 | * to abort our requeued SCB. | |
1da177e4 | 2170 | */ |
73a25462 HR |
2171 | ahd_outb(ahd, SCB_TASK_MANAGEMENT, |
2172 | pending_scb->hscb->task_management); | |
2173 | } else { | |
2174 | /* | |
2175 | * If non-packetized, set the MK_MESSAGE control | |
2176 | * bit indicating that we desire to send a message. | |
2177 | * We also set the disconnected flag since there is | |
2178 | * no guarantee that our SCB control byte matches | |
2179 | * the version on the card. We don't want the | |
2180 | * sequencer to abort the command thinking an | |
2181 | * unsolicited reselection occurred. | |
2182 | */ | |
2183 | pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED; | |
2184 | ||
2185 | /* | |
2186 | * The sequencer will never re-reference the | |
2187 | * in-core SCB. To make sure we are notified | |
2188 | * during reslection, set the MK_MESSAGE flag in | |
2189 | * the card's copy of the SCB. | |
2190 | */ | |
2191 | ahd_outb(ahd, SCB_CONTROL, | |
2192 | ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); | |
1da177e4 | 2193 | } |
73a25462 | 2194 | |
1da177e4 | 2195 | /* |
73a25462 HR |
2196 | * Clear out any entries in the QINFIFO first |
2197 | * so we are the next SCB for this target | |
2198 | * to run. | |
1da177e4 | 2199 | */ |
73a25462 HR |
2200 | ahd_search_qinfifo(ahd, cmd->device->id, |
2201 | cmd->device->channel + 'A', cmd->device->lun, | |
2202 | SCB_LIST_NULL, ROLE_INITIATOR, | |
2203 | CAM_REQUEUE_REQ, SEARCH_COMPLETE); | |
2204 | ahd_qinfifo_requeue_tail(ahd, pending_scb); | |
2205 | ahd_set_scbptr(ahd, saved_scbptr); | |
2206 | ahd_print_path(ahd, pending_scb); | |
2207 | printf("Device is disconnected, re-queuing SCB\n"); | |
2208 | wait = TRUE; | |
2209 | } else { | |
2210 | printf("%s:%d:%d:%d: Unable to deliver message\n", | |
2211 | ahd_name(ahd), cmd->device->channel, | |
2212 | cmd->device->id, cmd->device->lun); | |
2213 | retval = FAILED; | |
2214 | goto done; | |
1da177e4 | 2215 | } |
1da177e4 | 2216 | |
73a25462 | 2217 | no_cmd: |
1da177e4 | 2218 | /* |
73a25462 HR |
2219 | * Our assumption is that if we don't have the command, no |
2220 | * recovery action was required, so we return success. Again, | |
2221 | * the semantics of the mid-layer recovery engine are not | |
2222 | * well defined, so this may change in time. | |
1da177e4 | 2223 | */ |
73a25462 HR |
2224 | retval = SUCCESS; |
2225 | done: | |
2226 | if (paused) | |
2227 | ahd_unpause(ahd); | |
2228 | if (wait) { | |
2229 | struct timer_list timer; | |
2230 | int ret; | |
1da177e4 | 2231 | |
73a25462 HR |
2232 | ahd->platform_data->flags |= AHD_SCB_UP_EH_SEM; |
2233 | spin_unlock_irq(&ahd->platform_data->spin_lock); | |
2234 | init_timer(&timer); | |
2235 | timer.data = (u_long)ahd; | |
2236 | timer.expires = jiffies + (5 * HZ); | |
2237 | timer.function = ahd_linux_sem_timeout; | |
2238 | add_timer(&timer); | |
2239 | printf("Recovery code sleeping\n"); | |
2240 | down(&ahd->platform_data->eh_sem); | |
2241 | printf("Recovery code awake\n"); | |
2242 | ret = del_timer_sync(&timer); | |
2243 | if (ret == 0) { | |
2244 | printf("Timer Expired\n"); | |
2245 | retval = FAILED; | |
1da177e4 | 2246 | } |
73a25462 | 2247 | spin_lock_irq(&ahd->platform_data->spin_lock); |
1da177e4 | 2248 | } |
73a25462 HR |
2249 | spin_unlock_irq(&ahd->platform_data->spin_lock); |
2250 | return (retval); | |
1da177e4 LT |
2251 | } |
2252 | ||
73a25462 | 2253 | static void ahd_linux_set_width(struct scsi_target *starget, int width) |
1da177e4 | 2254 | { |
73a25462 HR |
2255 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2256 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2257 | struct ahd_devinfo devinfo; | |
2258 | unsigned long flags; | |
1da177e4 | 2259 | |
73a25462 HR |
2260 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, |
2261 | starget->channel + 'A', ROLE_INITIATOR); | |
2262 | ahd_lock(ahd, &flags); | |
2263 | ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE); | |
2264 | ahd_unlock(ahd, &flags); | |
2265 | } | |
2266 | ||
2267 | static void ahd_linux_set_period(struct scsi_target *starget, int period) | |
2268 | { | |
2269 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2270 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2271 | struct ahd_tmode_tstate *tstate; | |
2272 | struct ahd_initiator_tinfo *tinfo | |
2273 | = ahd_fetch_transinfo(ahd, | |
2274 | starget->channel + 'A', | |
2275 | shost->this_id, starget->id, &tstate); | |
2276 | struct ahd_devinfo devinfo; | |
2277 | unsigned int ppr_options = tinfo->goal.ppr_options; | |
a4b53a11 | 2278 | unsigned int dt; |
73a25462 HR |
2279 | unsigned long flags; |
2280 | unsigned long offset = tinfo->goal.offset; | |
1da177e4 | 2281 | |
a4b53a11 HR |
2282 | #ifdef AHD_DEBUG |
2283 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2284 | printf("%s: set period to %d\n", ahd_name(ahd), period); | |
2285 | #endif | |
73a25462 HR |
2286 | if (offset == 0) |
2287 | offset = MAX_OFFSET; | |
1da177e4 | 2288 | |
73a25462 HR |
2289 | if (period < 8) |
2290 | period = 8; | |
2291 | if (period < 10) { | |
2292 | ppr_options |= MSG_EXT_PPR_DT_REQ; | |
2293 | if (period == 8) | |
2294 | ppr_options |= MSG_EXT_PPR_IU_REQ; | |
1da177e4 LT |
2295 | } |
2296 | ||
a4b53a11 HR |
2297 | dt = ppr_options & MSG_EXT_PPR_DT_REQ; |
2298 | ||
73a25462 HR |
2299 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, |
2300 | starget->channel + 'A', ROLE_INITIATOR); | |
1da177e4 | 2301 | |
73a25462 HR |
2302 | /* all PPR requests apart from QAS require wide transfers */ |
2303 | if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) { | |
2304 | if (spi_width(starget) == 0) | |
2305 | ppr_options &= MSG_EXT_PPR_QAS_REQ; | |
1da177e4 | 2306 | } |
73a25462 | 2307 | |
a4b53a11 HR |
2308 | ahd_find_syncrate(ahd, &period, &ppr_options, |
2309 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
2310 | ||
73a25462 HR |
2311 | ahd_lock(ahd, &flags); |
2312 | ahd_set_syncrate(ahd, &devinfo, period, offset, | |
2313 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2314 | ahd_unlock(ahd, &flags); | |
1da177e4 LT |
2315 | } |
2316 | ||
73a25462 | 2317 | static void ahd_linux_set_offset(struct scsi_target *starget, int offset) |
1da177e4 | 2318 | { |
73a25462 HR |
2319 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2320 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2321 | struct ahd_tmode_tstate *tstate; | |
2322 | struct ahd_initiator_tinfo *tinfo | |
2323 | = ahd_fetch_transinfo(ahd, | |
2324 | starget->channel + 'A', | |
2325 | shost->this_id, starget->id, &tstate); | |
2326 | struct ahd_devinfo devinfo; | |
2327 | unsigned int ppr_options = 0; | |
2328 | unsigned int period = 0; | |
a4b53a11 | 2329 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; |
73a25462 HR |
2330 | unsigned long flags; |
2331 | ||
a4b53a11 HR |
2332 | #ifdef AHD_DEBUG |
2333 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2334 | printf("%s: set offset to %d\n", ahd_name(ahd), offset); | |
2335 | #endif | |
2336 | ||
73a25462 HR |
2337 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, |
2338 | starget->channel + 'A', ROLE_INITIATOR); | |
2339 | if (offset != 0) { | |
2340 | period = tinfo->goal.period; | |
2341 | ppr_options = tinfo->goal.ppr_options; | |
a4b53a11 HR |
2342 | ahd_find_syncrate(ahd, &period, &ppr_options, |
2343 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
1da177e4 | 2344 | } |
a4b53a11 | 2345 | |
73a25462 HR |
2346 | ahd_lock(ahd, &flags); |
2347 | ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options, | |
2348 | AHD_TRANS_GOAL, FALSE); | |
2349 | ahd_unlock(ahd, &flags); | |
1da177e4 LT |
2350 | } |
2351 | ||
73a25462 | 2352 | static void ahd_linux_set_dt(struct scsi_target *starget, int dt) |
1da177e4 | 2353 | { |
73a25462 HR |
2354 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2355 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2356 | struct ahd_tmode_tstate *tstate; | |
2357 | struct ahd_initiator_tinfo *tinfo | |
2358 | = ahd_fetch_transinfo(ahd, | |
2359 | starget->channel + 'A', | |
2360 | shost->this_id, starget->id, &tstate); | |
2361 | struct ahd_devinfo devinfo; | |
2362 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2363 | & ~MSG_EXT_PPR_DT_REQ; | |
2364 | unsigned int period = tinfo->goal.period; | |
52b5cfb3 | 2365 | unsigned int width = tinfo->goal.width; |
73a25462 HR |
2366 | unsigned long flags; |
2367 | ||
a4b53a11 HR |
2368 | #ifdef AHD_DEBUG |
2369 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2370 | printf("%s: %s DT\n", ahd_name(ahd), | |
2371 | dt ? "enabling" : "disabling"); | |
2372 | #endif | |
73a25462 HR |
2373 | if (dt) { |
2374 | ppr_options |= MSG_EXT_PPR_DT_REQ; | |
52b5cfb3 HR |
2375 | if (!width) |
2376 | ahd_linux_set_width(starget, 1); | |
a4b53a11 HR |
2377 | } else { |
2378 | if (period <= 9) | |
2379 | period = 10; /* If resetting DT, period must be >= 25ns */ | |
2380 | /* IU is invalid without DT set */ | |
2381 | ppr_options &= ~MSG_EXT_PPR_IU_REQ; | |
2382 | } | |
73a25462 HR |
2383 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, |
2384 | starget->channel + 'A', ROLE_INITIATOR); | |
2385 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2386 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
a4b53a11 | 2387 | |
73a25462 HR |
2388 | ahd_lock(ahd, &flags); |
2389 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2390 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2391 | ahd_unlock(ahd, &flags); | |
1da177e4 LT |
2392 | } |
2393 | ||
73a25462 | 2394 | static void ahd_linux_set_qas(struct scsi_target *starget, int qas) |
1da177e4 | 2395 | { |
73a25462 HR |
2396 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2397 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2398 | struct ahd_tmode_tstate *tstate; | |
2399 | struct ahd_initiator_tinfo *tinfo | |
2400 | = ahd_fetch_transinfo(ahd, | |
2401 | starget->channel + 'A', | |
2402 | shost->this_id, starget->id, &tstate); | |
2403 | struct ahd_devinfo devinfo; | |
2404 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2405 | & ~MSG_EXT_PPR_QAS_REQ; | |
2406 | unsigned int period = tinfo->goal.period; | |
a4b53a11 | 2407 | unsigned int dt; |
73a25462 HR |
2408 | unsigned long flags; |
2409 | ||
a4b53a11 HR |
2410 | #ifdef AHD_DEBUG |
2411 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2412 | printf("%s: %s QAS\n", ahd_name(ahd), | |
2413 | qas ? "enabling" : "disabling"); | |
2414 | #endif | |
2415 | ||
2416 | if (qas) { | |
2417 | ppr_options |= MSG_EXT_PPR_QAS_REQ; | |
2418 | } | |
2419 | ||
2420 | dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
73a25462 HR |
2421 | |
2422 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2423 | starget->channel + 'A', ROLE_INITIATOR); | |
2424 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2425 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
a4b53a11 | 2426 | |
73a25462 HR |
2427 | ahd_lock(ahd, &flags); |
2428 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2429 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2430 | ahd_unlock(ahd, &flags); | |
1da177e4 LT |
2431 | } |
2432 | ||
73a25462 | 2433 | static void ahd_linux_set_iu(struct scsi_target *starget, int iu) |
1da177e4 | 2434 | { |
73a25462 HR |
2435 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2436 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2437 | struct ahd_tmode_tstate *tstate; | |
2438 | struct ahd_initiator_tinfo *tinfo | |
2439 | = ahd_fetch_transinfo(ahd, | |
2440 | starget->channel + 'A', | |
2441 | shost->this_id, starget->id, &tstate); | |
2442 | struct ahd_devinfo devinfo; | |
2443 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2444 | & ~MSG_EXT_PPR_IU_REQ; | |
2445 | unsigned int period = tinfo->goal.period; | |
a4b53a11 | 2446 | unsigned int dt; |
73a25462 HR |
2447 | unsigned long flags; |
2448 | ||
a4b53a11 HR |
2449 | #ifdef AHD_DEBUG |
2450 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2451 | printf("%s: %s IU\n", ahd_name(ahd), | |
2452 | iu ? "enabling" : "disabling"); | |
2453 | #endif | |
2454 | ||
2455 | if (iu) { | |
73a25462 | 2456 | ppr_options |= MSG_EXT_PPR_IU_REQ; |
a4b53a11 HR |
2457 | ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */ |
2458 | } | |
2459 | ||
2460 | dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
73a25462 HR |
2461 | |
2462 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2463 | starget->channel + 'A', ROLE_INITIATOR); | |
2464 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2465 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
a4b53a11 | 2466 | |
73a25462 HR |
2467 | ahd_lock(ahd, &flags); |
2468 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2469 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2470 | ahd_unlock(ahd, &flags); | |
2471 | } | |
1da177e4 | 2472 | |
73a25462 HR |
2473 | static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm) |
2474 | { | |
2475 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2476 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2477 | struct ahd_tmode_tstate *tstate; | |
2478 | struct ahd_initiator_tinfo *tinfo | |
2479 | = ahd_fetch_transinfo(ahd, | |
2480 | starget->channel + 'A', | |
2481 | shost->this_id, starget->id, &tstate); | |
2482 | struct ahd_devinfo devinfo; | |
2483 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2484 | & ~MSG_EXT_PPR_RD_STRM; | |
2485 | unsigned int period = tinfo->goal.period; | |
2486 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
2487 | unsigned long flags; | |
2488 | ||
a4b53a11 HR |
2489 | #ifdef AHD_DEBUG |
2490 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2491 | printf("%s: %s Read Streaming\n", ahd_name(ahd), | |
2492 | rdstrm ? "enabling" : "disabling"); | |
2493 | #endif | |
2494 | ||
73a25462 HR |
2495 | if (rdstrm) |
2496 | ppr_options |= MSG_EXT_PPR_RD_STRM; | |
2497 | ||
2498 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2499 | starget->channel + 'A', ROLE_INITIATOR); | |
2500 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2501 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
a4b53a11 | 2502 | |
a4b53a11 HR |
2503 | ahd_lock(ahd, &flags); |
2504 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2505 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2506 | ahd_unlock(ahd, &flags); | |
2507 | } | |
2508 | ||
2509 | static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow) | |
2510 | { | |
2511 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2512 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2513 | struct ahd_tmode_tstate *tstate; | |
2514 | struct ahd_initiator_tinfo *tinfo | |
2515 | = ahd_fetch_transinfo(ahd, | |
2516 | starget->channel + 'A', | |
2517 | shost->this_id, starget->id, &tstate); | |
2518 | struct ahd_devinfo devinfo; | |
2519 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2520 | & ~MSG_EXT_PPR_WR_FLOW; | |
2521 | unsigned int period = tinfo->goal.period; | |
2522 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
2523 | unsigned long flags; | |
2524 | ||
2525 | #ifdef AHD_DEBUG | |
2526 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2527 | printf("%s: %s Write Flow Control\n", ahd_name(ahd), | |
2528 | wrflow ? "enabling" : "disabling"); | |
2529 | #endif | |
2530 | ||
2531 | if (wrflow) | |
2532 | ppr_options |= MSG_EXT_PPR_WR_FLOW; | |
2533 | ||
2534 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2535 | starget->channel + 'A', ROLE_INITIATOR); | |
2536 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2537 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
2538 | ||
a4b53a11 HR |
2539 | ahd_lock(ahd, &flags); |
2540 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2541 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2542 | ahd_unlock(ahd, &flags); | |
2543 | } | |
2544 | ||
2545 | static void ahd_linux_set_rti(struct scsi_target *starget, int rti) | |
2546 | { | |
2547 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2548 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2549 | struct ahd_tmode_tstate *tstate; | |
2550 | struct ahd_initiator_tinfo *tinfo | |
2551 | = ahd_fetch_transinfo(ahd, | |
2552 | starget->channel + 'A', | |
2553 | shost->this_id, starget->id, &tstate); | |
2554 | struct ahd_devinfo devinfo; | |
2555 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2556 | & ~MSG_EXT_PPR_RTI; | |
2557 | unsigned int period = tinfo->goal.period; | |
2558 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
2559 | unsigned long flags; | |
2560 | ||
2561 | if ((ahd->features & AHD_RTI) == 0) { | |
2562 | #ifdef AHD_DEBUG | |
2563 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2564 | printf("%s: RTI not available\n", ahd_name(ahd)); | |
2565 | #endif | |
2566 | return; | |
2567 | } | |
2568 | ||
2569 | #ifdef AHD_DEBUG | |
2570 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2571 | printf("%s: %s RTI\n", ahd_name(ahd), | |
2572 | rti ? "enabling" : "disabling"); | |
2573 | #endif | |
2574 | ||
2575 | if (rti) | |
2576 | ppr_options |= MSG_EXT_PPR_RTI; | |
2577 | ||
2578 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2579 | starget->channel + 'A', ROLE_INITIATOR); | |
2580 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2581 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
2582 | ||
a4b53a11 HR |
2583 | ahd_lock(ahd, &flags); |
2584 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2585 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2586 | ahd_unlock(ahd, &flags); | |
2587 | } | |
2588 | ||
2589 | static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp) | |
2590 | { | |
2591 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2592 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2593 | struct ahd_tmode_tstate *tstate; | |
2594 | struct ahd_initiator_tinfo *tinfo | |
2595 | = ahd_fetch_transinfo(ahd, | |
2596 | starget->channel + 'A', | |
2597 | shost->this_id, starget->id, &tstate); | |
2598 | struct ahd_devinfo devinfo; | |
2599 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2600 | & ~MSG_EXT_PPR_PCOMP_EN; | |
2601 | unsigned int period = tinfo->goal.period; | |
2602 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
2603 | unsigned long flags; | |
2604 | ||
2605 | #ifdef AHD_DEBUG | |
2606 | if ((ahd_debug & AHD_SHOW_DV) != 0) | |
2607 | printf("%s: %s Precompensation\n", ahd_name(ahd), | |
2608 | pcomp ? "Enable" : "Disable"); | |
2609 | #endif | |
2610 | ||
2611 | if (pcomp) | |
2612 | ppr_options |= MSG_EXT_PPR_PCOMP_EN; | |
2613 | ||
2614 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2615 | starget->channel + 'A', ROLE_INITIATOR); | |
2616 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2617 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
2618 | ||
73a25462 HR |
2619 | ahd_lock(ahd, &flags); |
2620 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2621 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2622 | ahd_unlock(ahd, &flags); | |
1da177e4 LT |
2623 | } |
2624 | ||
88ff29a4 JB |
2625 | static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold) |
2626 | { | |
2627 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
2628 | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | |
2629 | struct ahd_tmode_tstate *tstate; | |
2630 | struct ahd_initiator_tinfo *tinfo | |
2631 | = ahd_fetch_transinfo(ahd, | |
2632 | starget->channel + 'A', | |
2633 | shost->this_id, starget->id, &tstate); | |
2634 | struct ahd_devinfo devinfo; | |
2635 | unsigned int ppr_options = tinfo->goal.ppr_options | |
2636 | & ~MSG_EXT_PPR_HOLD_MCS; | |
2637 | unsigned int period = tinfo->goal.period; | |
2638 | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | |
2639 | unsigned long flags; | |
2640 | ||
2641 | if (hold) | |
2642 | ppr_options |= MSG_EXT_PPR_HOLD_MCS; | |
2643 | ||
2644 | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | |
2645 | starget->channel + 'A', ROLE_INITIATOR); | |
2646 | ahd_find_syncrate(ahd, &period, &ppr_options, | |
2647 | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | |
2648 | ||
2649 | ahd_lock(ahd, &flags); | |
2650 | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | |
2651 | ppr_options, AHD_TRANS_GOAL, FALSE); | |
2652 | ahd_unlock(ahd, &flags); | |
2653 | } | |
2654 | ||
2655 | ||
2656 | ||
73a25462 HR |
2657 | static struct spi_function_template ahd_linux_transport_functions = { |
2658 | .set_offset = ahd_linux_set_offset, | |
2659 | .show_offset = 1, | |
2660 | .set_period = ahd_linux_set_period, | |
2661 | .show_period = 1, | |
2662 | .set_width = ahd_linux_set_width, | |
2663 | .show_width = 1, | |
2664 | .set_dt = ahd_linux_set_dt, | |
2665 | .show_dt = 1, | |
2666 | .set_iu = ahd_linux_set_iu, | |
2667 | .show_iu = 1, | |
2668 | .set_qas = ahd_linux_set_qas, | |
2669 | .show_qas = 1, | |
2670 | .set_rd_strm = ahd_linux_set_rd_strm, | |
2671 | .show_rd_strm = 1, | |
a4b53a11 HR |
2672 | .set_wr_flow = ahd_linux_set_wr_flow, |
2673 | .show_wr_flow = 1, | |
2674 | .set_rti = ahd_linux_set_rti, | |
2675 | .show_rti = 1, | |
2676 | .set_pcomp_en = ahd_linux_set_pcomp_en, | |
2677 | .show_pcomp_en = 1, | |
88ff29a4 JB |
2678 | .set_hold_mcs = ahd_linux_set_hold_mcs, |
2679 | .show_hold_mcs = 1, | |
73a25462 HR |
2680 | }; |
2681 | ||
1da177e4 LT |
2682 | static int __init |
2683 | ahd_linux_init(void) | |
2684 | { | |
85a46523 CH |
2685 | int error = 0; |
2686 | ||
2687 | /* | |
2688 | * If we've been passed any parameters, process them now. | |
2689 | */ | |
2690 | if (aic79xx) | |
2691 | aic79xx_setup(aic79xx); | |
2692 | ||
2693 | ahd_linux_transport_template = | |
2694 | spi_attach_transport(&ahd_linux_transport_functions); | |
73a25462 HR |
2695 | if (!ahd_linux_transport_template) |
2696 | return -ENODEV; | |
85a46523 | 2697 | |
73a25462 HR |
2698 | scsi_transport_reserve_target(ahd_linux_transport_template, |
2699 | sizeof(struct ahd_linux_target)); | |
2700 | scsi_transport_reserve_device(ahd_linux_transport_template, | |
2701 | sizeof(struct ahd_linux_device)); | |
a80b3424 | 2702 | |
85a46523 CH |
2703 | error = ahd_linux_pci_init(); |
2704 | if (error) | |
2705 | spi_release_transport(ahd_linux_transport_template); | |
2706 | return error; | |
1da177e4 LT |
2707 | } |
2708 | ||
2709 | static void __exit | |
2710 | ahd_linux_exit(void) | |
2711 | { | |
1da177e4 | 2712 | ahd_linux_pci_exit(); |
73a25462 | 2713 | spi_release_transport(ahd_linux_transport_template); |
1da177e4 LT |
2714 | } |
2715 | ||
2716 | module_init(ahd_linux_init); | |
2717 | module_exit(ahd_linux_exit); |