]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blame - drivers/scsi/g_NCR5380.c
projects / mirror_ubuntu-zesty-kernel.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[SCSI] drivers/scsi: Use ARRAY_SIZE macro
[mirror_ubuntu-zesty-kernel.git] / drivers / scsi / g_NCR5380.c
CommitLineData
1da177e4
LT		 1/*
2 * Generic Generic NCR5380 driver
3 *
4 * Copyright 1993, Drew Eckhardt
5 * Visionary Computing
6 * (Unix and Linux consulting and custom programming)
7 * drew@colorado.edu
8 * +1 (303) 440-4894
9 *
10 * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
11 * K.Lentin@cs.monash.edu.au
12 *
13 * NCR53C400A extensions (c) 1996, Ingmar Baumgart
14 * ingmar@gonzo.schwaben.de
15 *
16 * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
17 * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
18 *
19 * Added ISAPNP support for DTC436 adapters,
20 * Thomas Sailer, sailer@ife.ee.ethz.ch
21 *
22 * ALPHA RELEASE 1.
23 *
24 * For more information, please consult
25 *
26 * NCR 5380 Family
27 * SCSI Protocol Controller
28 * Databook
29 *
30 * NCR Microelectronics
31 * 1635 Aeroplaza Drive
32 * Colorado Springs, CO 80916
33 * 1+ (719) 578-3400
34 * 1+ (800) 334-5454
35 */
36
37/*
38 * TODO : flesh out DMA support, find some one actually using this (I have
39 * a memory mapped Trantor board that works fine)
40 */
41
42/*
43 * Options :
44 *
45 * PARITY - enable parity checking. Not supported.
46 *
47 * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
48 *
49 * USLEEP - enable support for devices that don't disconnect. Untested.
50 *
51 * The card is detected and initialized in one of several ways :
52 * 1. With command line overrides - NCR5380=port,irq may be
53 * used on the LILO command line to override the defaults.
54 *
55 * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is
56 * specified as an array of address, irq, dma, board tuples. Ie, for
57 * one board at 0x350, IRQ5, no dma, I could say
58 * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
59 *
60 * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an
61 * IRQ line if overridden on the command line.
62 *
63 * 3. When included as a module, with arguments passed on the command line:
64 * ncr_irq=xx the interrupt
65 * ncr_addr=xx the port or base address (for port or memory
66 * mapped, resp.)
67 * ncr_dma=xx the DMA
68 * ncr_5380=1 to set up for a NCR5380 board
69 * ncr_53c400=1 to set up for a NCR53C400 board
70 * e.g.
71 * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
72 * for a port mapped NCR5380 board or
73 * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
74 * for a memory mapped NCR53C400 board with interrupts disabled.
75 *
76 * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an
77 * IRQ line if overridden on the command line.
78 *
79 */
80
81/*
82 * $Log: generic_NCR5380.c,v $
83 */
84
85/* settings for DTC3181E card with only Mustek scanner attached */
86#define USLEEP
87#define USLEEP_POLL 1
88#define USLEEP_SLEEP 20
89#define USLEEP_WAITLONG 500
90
91#define AUTOPROBE_IRQ
92#define AUTOSENSE
93
94#include <linux/config.h>
95
96#ifdef CONFIG_SCSI_GENERIC_NCR53C400
97#define NCR53C400_PSEUDO_DMA 1
98#define PSEUDO_DMA
99#define NCR53C400
100#define NCR5380_STATS
101#undef NCR5380_STAT_LIMIT
102#endif
103
104#include <asm/system.h>
105#include <asm/io.h>
106#include <linux/signal.h>
107#include <linux/sched.h>
108#include <linux/blkdev.h>
109#include "scsi.h"
110#include <scsi/scsi_host.h>
111#include "g_NCR5380.h"
112#include "NCR5380.h"
113#include <linux/stat.h>
114#include <linux/init.h>
115#include <linux/ioport.h>
116#include <linux/isapnp.h>
117#include <linux/delay.h>
118#include <linux/interrupt.h>
119
120#define NCR_NOT_SET 0
121static int ncr_irq = NCR_NOT_SET;
122static int ncr_dma = NCR_NOT_SET;
123static int ncr_addr = NCR_NOT_SET;
124static int ncr_5380 = NCR_NOT_SET;
125static int ncr_53c400 = NCR_NOT_SET;
126static int ncr_53c400a = NCR_NOT_SET;
127static int dtc_3181e = NCR_NOT_SET;
128
129static struct override {
c818cb64 130 NCR5380_map_type NCR5380_map_name;
1da177e4
LT		 131 int irq;
132 int dma;
133 int board; /* Use NCR53c400, Ricoh, etc. extensions ? */
134} overrides
135#ifdef GENERIC_NCR5380_OVERRIDE
136[] __initdata = GENERIC_NCR5380_OVERRIDE;
137#else
138[1] __initdata = { { 0,},};
139#endif
140
6391a113 141#define NO_OVERRIDES ARRAY_SIZE(overrides)
1da177e4 142
6391a113 143#ifndef MODULE
1da177e4
LT		 144
145/**
146 * internal_setup - handle lilo command string override
147 * @board: BOARD_* identifier for the board
148 * @str: unused
149 * @ints: numeric parameters
150 *
151 * Do LILO command line initialization of the overrides array. Display
152 * errors when needed
153 *
154 * Locks: none
155 */
156
157static void __init internal_setup(int board, char *str, int *ints)
158{
159 static int commandline_current = 0;
160 switch (board) {
161 case BOARD_NCR5380:
162 if (ints[0] != 2 && ints[0] != 3) {
163 printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
164 return;
165 }
166 break;
167 case BOARD_NCR53C400:
168 if (ints[0] != 2) {
169 printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
170 return;
171 }
172 break;
173 case BOARD_NCR53C400A:
174 if (ints[0] != 2) {
175 printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
176 return;
177 }
178 break;
179 case BOARD_DTC3181E:
180 if (ints[0] != 2) {
181 printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
182 return;
183 }
184 break;
185 }
186
187 if (commandline_current < NO_OVERRIDES) {
188 overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
189 overrides[commandline_current].irq = ints[2];
190 if (ints[0] == 3)
191 overrides[commandline_current].dma = ints[3];
192 else
193 overrides[commandline_current].dma = DMA_NONE;
194 overrides[commandline_current].board = board;
195 ++commandline_current;
196 }
197}
198
199
200/**
201 * do_NCR53C80_setup - set up entry point
202 * @str: unused
203 *
204 * Setup function invoked at boot to parse the ncr5380= command
205 * line.
206 */
207
208static int __init do_NCR5380_setup(char *str)
209{
210 int ints[10];
211
6391a113 212 get_options(str, ARRAY_SIZE(ints), ints);
1da177e4
LT		 213 internal_setup(BOARD_NCR5380, str, ints);
214 return 1;
215}
216
217/**
218 * do_NCR53C400_setup - set up entry point
219 * @str: unused
6391a113 220 * @ints: integer parameters from kernel setup code
1da177e4
LT		 221 *
222 * Setup function invoked at boot to parse the ncr53c400= command
223 * line.
224 */
225
226static int __init do_NCR53C400_setup(char *str)
227{
228 int ints[10];
229
6391a113 230 get_options(str, ARRAY_SIZE(ints), ints);
1da177e4
LT		 231 internal_setup(BOARD_NCR53C400, str, ints);
232 return 1;
233}
234
235/**
236 * do_NCR53C400A_setup - set up entry point
237 * @str: unused
6391a113 238 * @ints: integer parameters from kernel setup code
1da177e4
LT		 239 *
240 * Setup function invoked at boot to parse the ncr53c400a= command
241 * line.
242 */
243
244static int __init do_NCR53C400A_setup(char *str)
245{
246 int ints[10];
247
6391a113 248 get_options(str, ARRAY_SIZE(ints), ints);
1da177e4
LT		 249 internal_setup(BOARD_NCR53C400A, str, ints);
250 return 1;
251}
252
253/**
254 * do_DTC3181E_setup - set up entry point
255 * @str: unused
6391a113 256 * @ints: integer parameters from kernel setup code
1da177e4
LT		 257 *
258 * Setup function invoked at boot to parse the dtc3181e= command
259 * line.
260 */
261
262static int __init do_DTC3181E_setup(char *str)
263{
264 int ints[10];
265
6391a113 266 get_options(str, ARRAY_SIZE(ints), ints);
1da177e4
LT		 267 internal_setup(BOARD_DTC3181E, str, ints);
268 return 1;
269}
270
271#endif
272
273/**
274 * generic_NCR5380_detect - look for NCR5380 controllers
275 * @tpnt: the scsi template
276 *
277 * Scan for the present of NCR5380, NCR53C400, NCR53C400A, DTC3181E
278 * and DTC436(ISAPnP) controllers. If overrides have been set we use
279 * them.
280 *
281 * The caller supplied NCR5380_init function is invoked from here, before
282 * the interrupt line is taken.
283 *
284 * Locks: none
285 */
286
d0be4a7d 287int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
1da177e4
LT		 288{
289 static int current_override = 0;
290 int count, i;
291 unsigned int *ports;
292 unsigned long region_size = 16;
293 static unsigned int __initdata ncr_53c400a_ports[] = {
294 0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
295 };
296 static unsigned int __initdata dtc_3181e_ports[] = {
297 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
298 };
299 int flags = 0;
300 struct Scsi_Host *instance;
c818cb64
AV		 301#ifdef CONFIG_SCSI_G_NCR5380_MEM
302 unsigned long base;
303 void __iomem *iomem;
304#endif
1da177e4
LT		 305
306 if (ncr_irq != NCR_NOT_SET)
307 overrides[0].irq = ncr_irq;
308 if (ncr_dma != NCR_NOT_SET)
309 overrides[0].dma = ncr_dma;
310 if (ncr_addr != NCR_NOT_SET)
311 overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
312 if (ncr_5380 != NCR_NOT_SET)
313 overrides[0].board = BOARD_NCR5380;
314 else if (ncr_53c400 != NCR_NOT_SET)
315 overrides[0].board = BOARD_NCR53C400;
316 else if (ncr_53c400a != NCR_NOT_SET)
317 overrides[0].board = BOARD_NCR53C400A;
318 else if (dtc_3181e != NCR_NOT_SET)
319 overrides[0].board = BOARD_DTC3181E;
320
321 if (!current_override && isapnp_present()) {
322 struct pnp_dev *dev = NULL;
323 count = 0;
324 while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
325 if (count >= NO_OVERRIDES)
326 break;
327 if (pnp_device_attach(dev) < 0) {
328 printk(KERN_ERR "dtc436e probe: attach failed\n");
329 continue;
330 }
331 if (pnp_activate_dev(dev) < 0) {
332 printk(KERN_ERR "dtc436e probe: activate failed\n");
333 pnp_device_detach(dev);
334 continue;
335 }
336 if (!pnp_port_valid(dev, 0)) {
337 printk(KERN_ERR "dtc436e probe: no valid port\n");
338 pnp_device_detach(dev);
339 continue;
340 }
341 if (pnp_irq_valid(dev, 0))
342 overrides[count].irq = pnp_irq(dev, 0);
343 else
344 overrides[count].irq = SCSI_IRQ_NONE;
345 if (pnp_dma_valid(dev, 0))
346 overrides[count].dma = pnp_dma(dev, 0);
347 else
348 overrides[count].dma = DMA_NONE;
349 overrides[count].NCR5380_map_name = (NCR5380_map_type) pnp_port_start(dev, 0);
350 overrides[count].board = BOARD_DTC3181E;
351 count++;
352 }
353 }
354
355 tpnt->proc_name = "g_NCR5380";
356
357 for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
358 if (!(overrides[current_override].NCR5380_map_name))
359 continue;
360
361 ports = NULL;
362 switch (overrides[current_override].board) {
363 case BOARD_NCR5380:
364 flags = FLAG_NO_PSEUDO_DMA;
365 break;
366 case BOARD_NCR53C400:
367 flags = FLAG_NCR53C400;
368 break;
369 case BOARD_NCR53C400A:
370 flags = FLAG_NO_PSEUDO_DMA;
371 ports = ncr_53c400a_ports;
372 break;
373 case BOARD_DTC3181E:
374 flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
375 ports = dtc_3181e_ports;
376 break;
377 }
378
379#ifndef CONFIG_SCSI_G_NCR5380_MEM
380 if (ports) {
381 /* wakeup sequence for the NCR53C400A and DTC3181E */
382
383 /* Disable the adapter and look for a free io port */
384 outb(0x59, 0x779);
385 outb(0xb9, 0x379);
386 outb(0xc5, 0x379);
387 outb(0xae, 0x379);
388 outb(0xa6, 0x379);
389 outb(0x00, 0x379);
390
391 if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
392 for (i = 0; ports[i]; i++) {
393 if (!request_region(ports[i], 16, "ncr53c80"))
394 continue;
395 if (overrides[current_override].NCR5380_map_name == ports[i])
396 break;
397 release_region(ports[i], 16);
398 } else
399 for (i = 0; ports[i]; i++) {
400 if (!request_region(ports[i], 16, "ncr53c80"))
401 continue;
402 if (inb(ports[i]) == 0xff)
403 break;
404 release_region(ports[i], 16);
405 }
406 if (ports[i]) {
407 /* At this point we have our region reserved */
408 outb(0x59, 0x779);
409 outb(0xb9, 0x379);
410 outb(0xc5, 0x379);
411 outb(0xae, 0x379);
412 outb(0xa6, 0x379);
413 outb(0x80 | i, 0x379); /* set io port to be used */
414 outb(0xc0, ports[i] + 9);
415 if (inb(ports[i] + 9) != 0x80)
416 continue;
417 else
418 overrides[current_override].NCR5380_map_name = ports[i];
419 } else
420 continue;
421 }
422 else
423 {
424 /* Not a 53C400A style setup - just grab */
425 if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
426 continue;
427 region_size = NCR5380_region_size;
428 }
429#else
c818cb64
AV		 430 base = overrides[current_override].NCR5380_map_name;
431 if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
432 continue;
433 iomem = ioremap(base, NCR5380_region_size);
434 if (!iomem) {
435 release_mem_region(base, NCR5380_region_size);
1da177e4 436 continue;
c818cb64 437 }
1da177e4
LT		 438#endif
439 instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
440 if (instance == NULL) {
441#ifndef CONFIG_SCSI_G_NCR5380_MEM
442 release_region(overrides[current_override].NCR5380_map_name, region_size);
443#else
c818cb64
AV		 444 iounmap(iomem);
445 release_mem_region(base, NCR5380_region_size);
1da177e4
LT		 446#endif
447 continue;
448 }
449
450 instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
451#ifndef CONFIG_SCSI_G_NCR5380_MEM
452 instance->n_io_port = region_size;
c818cb64
AV		 453#else
454 ((struct NCR5380_hostdata *)instance->hostdata).iomem = iomem;
1da177e4
LT		 455#endif
456
457 NCR5380_init(instance, flags);
458
459 if (overrides[current_override].irq != IRQ_AUTO)
460 instance->irq = overrides[current_override].irq;
461 else
462 instance->irq = NCR5380_probe_irq(instance, 0xffff);
463
464 if (instance->irq != SCSI_IRQ_NONE)
465 if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", instance)) {
466 printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
467 instance->irq = SCSI_IRQ_NONE;
468 }
469
470 if (instance->irq == SCSI_IRQ_NONE) {
471 printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
472 printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
473 }
474
475 printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
476 if (instance->irq == SCSI_IRQ_NONE)
477 printk(" interrupts disabled");
478 else
479 printk(" irq %d", instance->irq);
480 printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
481 NCR5380_print_options(instance);
482 printk("\n");
483
484 ++current_override;
485 ++count;
486 }
487 return count;
488}
489
490/**
491 * generic_NCR5380_info - reporting string
492 * @host: NCR5380 to report on
493 *
494 * Report driver information for the NCR5380
495 */
496
497const char *generic_NCR5380_info(struct Scsi_Host *host)
498{
499 static const char string[] = "Generic NCR5380/53C400 Driver";
500 return string;
501}
502
503/**
504 * generic_NCR5380_release_resources - free resources
505 * @instance: host adapter to clean up
506 *
507 * Free the generic interface resources from this adapter.
508 *
509 * Locks: none
510 */
511
512int generic_NCR5380_release_resources(struct Scsi_Host *instance)
513{
514 NCR5380_local_declare();
515 NCR5380_setup(instance);
516
517 if (instance->irq != SCSI_IRQ_NONE)
518 free_irq(instance->irq, NULL);
519 NCR5380_exit(instance);
520
521#ifndef CONFIG_SCSI_G_NCR5380_MEM
522 release_region(instance->NCR5380_instance_name, instance->n_io_port);
523#else
c818cb64 524 iounmap(((struct NCR5380_hostdata *)instance->hostdata).iomem);
1da177e4
LT		 525 release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
526#endif
527
528
529 return 0;
530}
531
532#ifdef BIOSPARAM
533/**
534 * generic_NCR5380_biosparam
535 * @disk: disk to compute geometry for
536 * @dev: device identifier for this disk
537 * @ip: sizes to fill in
538 *
539 * Generates a BIOS / DOS compatible H-C-S mapping for the specified
540 * device / size.
541 *
542 * XXX Most SCSI boards use this mapping, I could be incorrect. Someone
543 * using hard disks on a trantor should verify that this mapping
544 * corresponds to that used by the BIOS / ASPI driver by running the linux
545 * fdisk program and matching the H_C_S coordinates to what DOS uses.
546 *
547 * Locks: none
548 */
549
550static int
551generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
552 sector_t capacity, int *ip)
553{
554 ip[0] = 64;
555 ip[1] = 32;
556 ip[2] = capacity >> 11;
557 return 0;
558}
559#endif
560
561#if NCR53C400_PSEUDO_DMA
562
563/**
564 * NCR5380_pread - pseudo DMA read
565 * @instance: adapter to read from
566 * @dst: buffer to read into
567 * @len: buffer length
568 *
569 * Perform a psuedo DMA mode read from an NCR53C400 or equivalent
570 * controller
571 */
572
573static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
574{
575 int blocks = len / 128;
576 int start = 0;
577 int bl;
578
579 NCR5380_local_declare();
580 NCR5380_setup(instance);
581
582 NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
583 NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
584 while (1) {
585 if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
586 break;
587 }
588 if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
589 printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
590 return -1;
591 }
592 while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
593
594#ifndef CONFIG_SCSI_G_NCR5380_MEM
595 {
596 int i;
597 for (i = 0; i < 128; i++)
598 dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
599 }
600#else
601 /* implies CONFIG_SCSI_G_NCR5380_MEM */
c818cb64 602 memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
1da177e4
LT		 603#endif
604 start += 128;
605 blocks--;
606 }
607
608 if (blocks) {
609 while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
610 {
611 // FIXME - no timeout
612 }
613
614#ifndef CONFIG_SCSI_G_NCR5380_MEM
615 {
616 int i;
617 for (i = 0; i < 128; i++)
618 dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
619 }
620#else
621 /* implies CONFIG_SCSI_G_NCR5380_MEM */
c818cb64 622 memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
1da177e4
LT		 623#endif
624 start += 128;
625 blocks--;
626 }
627
628 if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
629 printk("53C400r: no 53C80 gated irq after transfer");
630
631#if 0
632 /*
633 * DON'T DO THIS - THEY NEVER ARRIVE!
634 */
635 printk("53C400r: Waiting for 53C80 registers\n");
636 while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
637 ;
638#endif
639 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
640 printk(KERN_ERR "53C400r: no end dma signal\n");
641
642 NCR5380_write(MODE_REG, MR_BASE);
643 NCR5380_read(RESET_PARITY_INTERRUPT_REG);
644 return 0;
645}
646
647/**
648 * NCR5380_write - pseudo DMA write
649 * @instance: adapter to read from
650 * @dst: buffer to read into
651 * @len: buffer length
652 *
653 * Perform a psuedo DMA mode read from an NCR53C400 or equivalent
654 * controller
655 */
656
657static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
658{
659 int blocks = len / 128;
660 int start = 0;
661 int bl;
662 int i;
663
664 NCR5380_local_declare();
665 NCR5380_setup(instance);
666
667 NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
668 NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
669 while (1) {
670 if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
671 printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
672 return -1;
673 }
674
675 if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
676 break;
677 }
678 while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
679 ; // FIXME - timeout
680#ifndef CONFIG_SCSI_G_NCR5380_MEM
681 {
682 for (i = 0; i < 128; i++)
683 NCR5380_write(C400_HOST_BUFFER, src[start + i]);
684 }
685#else
686 /* implies CONFIG_SCSI_G_NCR5380_MEM */
c818cb64 687 memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
1da177e4
LT		 688#endif
689 start += 128;
690 blocks--;
691 }
692 if (blocks) {
693 while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
694 ; // FIXME - no timeout
695
696#ifndef CONFIG_SCSI_G_NCR5380_MEM
697 {
698 for (i = 0; i < 128; i++)
699 NCR5380_write(C400_HOST_BUFFER, src[start + i]);
700 }
701#else
702 /* implies CONFIG_SCSI_G_NCR5380_MEM */
c818cb64 703 memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
1da177e4
LT		 704#endif
705 start += 128;
706 blocks--;
707 }
708
709#if 0
710 printk("53C400w: waiting for registers to be available\n");
711 THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
712 printk("53C400w: Got em\n");
713#endif
714
715 /* Let's wait for this instead - could be ugly */
716 /* All documentation says to check for this. Maybe my hardware is too
717 * fast. Waiting for it seems to work fine! KLL
718 */
719 while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
720 ; // FIXME - no timeout
721
722 /*
723 * I know. i is certainly != 0 here but the loop is new. See previous
724 * comment.
725 */
726 if (i) {
727 if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
728 printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
729 } else
730 printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
731
732#if 0
733 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
734 printk(KERN_ERR "53C400w: no end dma signal\n");
735 }
736#endif
737 while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
738 ; // TIMEOUT
739 return 0;
740}
741#endif /* PSEUDO_DMA */
742
743/*
744 * Include the NCR5380 core code that we build our driver around
745 */
746
747#include "NCR5380.c"
748
749#define PRINTP(x) len += sprintf(buffer+len, x)
750#define ANDP ,
751
752static int sprint_opcode(char *buffer, int len, int opcode)
753{
754 int start = len;
755 PRINTP("0x%02x " ANDP opcode);
756 return len - start;
757}
758
759static int sprint_command(char *buffer, int len, unsigned char *command)
760{
761 int i, s, start = len;
762 len += sprint_opcode(buffer, len, command[0]);
763 for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
764 PRINTP("%02x " ANDP command[i]);
765 PRINTP("\n");
766 return len - start;
767}
768
769/**
770 * sprintf_Scsi_Cmnd - print a scsi command
771 * @buffer: buffr to print into
772 * @len: buffer length
773 * @cmd: SCSI command block
774 *
775 * Print out the target and command data in hex
776 */
777
778static int sprint_Scsi_Cmnd(char *buffer, int len, Scsi_Cmnd * cmd)
779{
780 int start = len;
781 PRINTP("host number %d destination target %d, lun %d\n" ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun);
782 PRINTP(" command = ");
783 len += sprint_command(buffer, len, cmd->cmnd);
784 return len - start;
785}
786
787/**
788 * generic_NCR5380_proc_info - /proc for NCR5380 driver
789 * @buffer: buffer to print into
790 * @start: start position
791 * @offset: offset into buffer
792 * @len: length
793 * @hostno: instance to affect
794 * @inout: read/write
795 *
796 * Provide the procfs information for the 5380 controller. We fill
797 * this with useful debugging information including the commands
798 * being executed, disconnected command queue and the statistical
799 * data
800 *
801 * Locks: global cli/lock for queue walk
802 */
803
804static int generic_NCR5380_proc_info(struct Scsi_Host *scsi_ptr, char *buffer, char **start, off_t offset, int length, int inout)
805{
806 int len = 0;
807 NCR5380_local_declare();
808 unsigned long flags;
809 unsigned char status;
810 int i;
811 Scsi_Cmnd *ptr;
812 struct NCR5380_hostdata *hostdata;
813#ifdef NCR5380_STATS
f64a181d 814 struct scsi_device *dev;
1da177e4
LT		 815 extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
816#endif
817
818 NCR5380_setup(scsi_ptr);
819 hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata;
820
821 spin_lock_irqsave(scsi_ptr->host_lock, flags);
822 PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
823 PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
824 PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE);
825#ifdef NCR53C400
826 PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE);
827 PRINTP("NCR53C400 card%s detected\n" ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not");
828# if NCR53C400_PSEUDO_DMA
829 PRINTP("NCR53C400 pseudo DMA used\n");
830# endif
831#else
832 PRINTP("NO NCR53C400 driver extensions\n");
833#endif
834 PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
835 if (scsi_ptr->irq == SCSI_IRQ_NONE)
836 PRINTP("no interrupt\n");
837 else
838 PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
839
840#ifdef NCR5380_STATS
841 if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue)
842 PRINTP("There are commands pending, transfer rates may be crud\n");
843 if (hostdata->pendingr)
844 PRINTP(" %d pending reads" ANDP hostdata->pendingr);
845 if (hostdata->pendingw)
846 PRINTP(" %d pending writes" ANDP hostdata->pendingw);
847 if (hostdata->pendingr || hostdata->pendingw)
848 PRINTP("\n");
849 shost_for_each_device(dev, scsi_ptr) {
850 unsigned long br = hostdata->bytes_read[dev->id];
851 unsigned long bw = hostdata->bytes_write[dev->id];
852 long tr = hostdata->time_read[dev->id] / HZ;
853 long tw = hostdata->time_write[dev->id] / HZ;
854
855 PRINTP(" T:%d %s " ANDP dev->id ANDP(dev->type < MAX_SCSI_DEVICE_CODE) ? scsi_device_types[(int) dev->type] : "Unknown");
856 for (i = 0; i < 8; i++)
857 if (dev->vendor[i] >= 0x20)
858 *(buffer + (len++)) = dev->vendor[i];
859 *(buffer + (len++)) = ' ';
860 for (i = 0; i < 16; i++)
861 if (dev->model[i] >= 0x20)
862 *(buffer + (len++)) = dev->model[i];
863 *(buffer + (len++)) = ' ';
864 for (i = 0; i < 4; i++)
865 if (dev->rev[i] >= 0x20)
866 *(buffer + (len++)) = dev->rev[i];
867 *(buffer + (len++)) = ' ';
868
869 PRINTP("\n%10ld kb read in %5ld secs" ANDP br / 1024 ANDP tr);
870 if (tr)
871 PRINTP(" @ %5ld bps" ANDP br / tr);
872
873 PRINTP("\n%10ld kb written in %5ld secs" ANDP bw / 1024 ANDP tw);
874 if (tw)
875 PRINTP(" @ %5ld bps" ANDP bw / tw);
876 PRINTP("\n");
877 }
878#endif
879
880 status = NCR5380_read(STATUS_REG);
881 if (!(status & SR_REQ))
882 PRINTP("REQ not asserted, phase unknown.\n");
883 else {
884 for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
885 PRINTP("Phase %s\n" ANDP phases[i].name);
886 }
887
888 if (!hostdata->connected) {
889 PRINTP("No currently connected command\n");
890 } else {
891 len += sprint_Scsi_Cmnd(buffer, len, (Scsi_Cmnd *) hostdata->connected);
892 }
893
894 PRINTP("issue_queue\n");
895
896 for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
897 len += sprint_Scsi_Cmnd(buffer, len, ptr);
898
899 PRINTP("disconnected_queue\n");
900
901 for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
902 len += sprint_Scsi_Cmnd(buffer, len, ptr);
903
904 *start = buffer + offset;
905 len -= offset;
906 if (len > length)
907 len = length;
908 spin_unlock_irqrestore(scsi_ptr->host_lock, flags);
909 return len;
910}
911
912#undef PRINTP
913#undef ANDP
914
d0be4a7d 915static struct scsi_host_template driver_template = {
1da177e4
LT		 916 .proc_info = generic_NCR5380_proc_info,
917 .name = "Generic NCR5380/NCR53C400 Scsi Driver",
918 .detect = generic_NCR5380_detect,
919 .release = generic_NCR5380_release_resources,
920 .info = generic_NCR5380_info,
921 .queuecommand = generic_NCR5380_queue_command,
922 .eh_abort_handler = generic_NCR5380_abort,
923 .eh_bus_reset_handler = generic_NCR5380_bus_reset,
1da177e4
LT		 924 .bios_param = NCR5380_BIOSPARAM,
925 .can_queue = CAN_QUEUE,
926 .this_id = 7,
927 .sg_tablesize = SG_ALL,
928 .cmd_per_lun = CMD_PER_LUN,
929 .use_clustering = DISABLE_CLUSTERING,
930};
931#include <linux/module.h>
932#include "scsi_module.c"
933
934module_param(ncr_irq, int, 0);
935module_param(ncr_dma, int, 0);
936module_param(ncr_addr, int, 0);
937module_param(ncr_5380, int, 0);
938module_param(ncr_53c400, int, 0);
939module_param(ncr_53c400a, int, 0);
940module_param(dtc_3181e, int, 0);
941MODULE_LICENSE("GPL");
942
943
944static struct isapnp_device_id id_table[] __devinitdata = {
945 {
946 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
947 ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e),
948 0},
949 {0}
950};
951
952MODULE_DEVICE_TABLE(isapnp, id_table);
953
954
955__setup("ncr5380=", do_NCR5380_setup);
956__setup("ncr53c400=", do_NCR53C400_setup);
957__setup("ncr53c400a=", do_NCR53C400A_setup);
958__setup("dtc3181e=", do_DTC3181E_setup);
ubuntu-zesty-kernel mirror