]>
Commit | Line | Data |
---|---|---|
edd16368 SC |
1 | /* |
2 | * Disk Array driver for HP Smart Array SAS controllers | |
3 | * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; version 2 of the License. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
12 | * NON INFRINGEMENT. See the GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | * | |
18 | * Questions/Comments/Bugfixes to iss_storagedev@hp.com | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/module.h> | |
23 | #include <linux/interrupt.h> | |
24 | #include <linux/types.h> | |
25 | #include <linux/pci.h> | |
26 | #include <linux/kernel.h> | |
27 | #include <linux/slab.h> | |
28 | #include <linux/delay.h> | |
29 | #include <linux/fs.h> | |
30 | #include <linux/timer.h> | |
31 | #include <linux/seq_file.h> | |
32 | #include <linux/init.h> | |
33 | #include <linux/spinlock.h> | |
34 | #include <linux/smp_lock.h> | |
35 | #include <linux/compat.h> | |
36 | #include <linux/blktrace_api.h> | |
37 | #include <linux/uaccess.h> | |
38 | #include <linux/io.h> | |
39 | #include <linux/dma-mapping.h> | |
40 | #include <linux/completion.h> | |
41 | #include <linux/moduleparam.h> | |
42 | #include <scsi/scsi.h> | |
43 | #include <scsi/scsi_cmnd.h> | |
44 | #include <scsi/scsi_device.h> | |
45 | #include <scsi/scsi_host.h> | |
46 | #include <linux/cciss_ioctl.h> | |
47 | #include <linux/string.h> | |
48 | #include <linux/bitmap.h> | |
49 | #include <asm/atomic.h> | |
50 | #include <linux/kthread.h> | |
51 | #include "hpsa_cmd.h" | |
52 | #include "hpsa.h" | |
53 | ||
54 | /* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ | |
55 | #define HPSA_DRIVER_VERSION "1.0.0" | |
56 | #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" | |
57 | ||
58 | /* How long to wait (in milliseconds) for board to go into simple mode */ | |
59 | #define MAX_CONFIG_WAIT 30000 | |
60 | #define MAX_IOCTL_CONFIG_WAIT 1000 | |
61 | ||
62 | /*define how many times we will try a command because of bus resets */ | |
63 | #define MAX_CMD_RETRIES 3 | |
64 | ||
65 | /* Embedded module documentation macros - see modules.h */ | |
66 | MODULE_AUTHOR("Hewlett-Packard Company"); | |
67 | MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ | |
68 | HPSA_DRIVER_VERSION); | |
69 | MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); | |
70 | MODULE_VERSION(HPSA_DRIVER_VERSION); | |
71 | MODULE_LICENSE("GPL"); | |
72 | ||
73 | static int hpsa_allow_any; | |
74 | module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); | |
75 | MODULE_PARM_DESC(hpsa_allow_any, | |
76 | "Allow hpsa driver to access unknown HP Smart Array hardware"); | |
77 | ||
78 | /* define the PCI info for the cards we can control */ | |
79 | static const struct pci_device_id hpsa_pci_device_id[] = { | |
edd16368 SC |
80 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, |
81 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, | |
82 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, | |
83 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, | |
84 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, | |
85 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, | |
86 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, | |
f8b01eb9 MM |
87 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233}, |
88 | #define PCI_DEVICE_ID_HP_CISSF 0x333f | |
89 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F}, | |
edd16368 SC |
90 | {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
91 | PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, | |
92 | {0,} | |
93 | }; | |
94 | ||
95 | MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); | |
96 | ||
97 | /* board_id = Subsystem Device ID & Vendor ID | |
98 | * product = Marketing Name for the board | |
99 | * access = Address of the struct of function pointers | |
100 | */ | |
101 | static struct board_type products[] = { | |
edd16368 SC |
102 | {0x3241103C, "Smart Array P212", &SA5_access}, |
103 | {0x3243103C, "Smart Array P410", &SA5_access}, | |
104 | {0x3245103C, "Smart Array P410i", &SA5_access}, | |
105 | {0x3247103C, "Smart Array P411", &SA5_access}, | |
106 | {0x3249103C, "Smart Array P812", &SA5_access}, | |
107 | {0x324a103C, "Smart Array P712m", &SA5_access}, | |
108 | {0x324b103C, "Smart Array P711m", &SA5_access}, | |
f8b01eb9 MM |
109 | {0x3233103C, "StorageWorks P1210m", &SA5_access}, |
110 | {0x333F103C, "StorageWorks P1210m", &SA5_access}, | |
edd16368 SC |
111 | {0xFFFF103C, "Unknown Smart Array", &SA5_access}, |
112 | }; | |
113 | ||
114 | static int number_of_controllers; | |
115 | ||
116 | static irqreturn_t do_hpsa_intr(int irq, void *dev_id); | |
117 | static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); | |
118 | static void start_io(struct ctlr_info *h); | |
119 | ||
120 | #ifdef CONFIG_COMPAT | |
121 | static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); | |
122 | #endif | |
123 | ||
124 | static void cmd_free(struct ctlr_info *h, struct CommandList *c); | |
125 | static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); | |
126 | static struct CommandList *cmd_alloc(struct ctlr_info *h); | |
127 | static struct CommandList *cmd_special_alloc(struct ctlr_info *h); | |
01a02ffc SC |
128 | static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, |
129 | void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, | |
edd16368 SC |
130 | int cmd_type); |
131 | ||
132 | static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, | |
133 | void (*done)(struct scsi_cmnd *)); | |
a08a8471 SC |
134 | static void hpsa_scan_start(struct Scsi_Host *); |
135 | static int hpsa_scan_finished(struct Scsi_Host *sh, | |
136 | unsigned long elapsed_time); | |
edd16368 SC |
137 | |
138 | static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); | |
139 | static int hpsa_slave_alloc(struct scsi_device *sdev); | |
140 | static void hpsa_slave_destroy(struct scsi_device *sdev); | |
141 | ||
142 | static ssize_t raid_level_show(struct device *dev, | |
143 | struct device_attribute *attr, char *buf); | |
144 | static ssize_t lunid_show(struct device *dev, | |
145 | struct device_attribute *attr, char *buf); | |
146 | static ssize_t unique_id_show(struct device *dev, | |
147 | struct device_attribute *attr, char *buf); | |
148 | static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); | |
149 | static ssize_t host_store_rescan(struct device *dev, | |
150 | struct device_attribute *attr, const char *buf, size_t count); | |
151 | static int check_for_unit_attention(struct ctlr_info *h, | |
152 | struct CommandList *c); | |
153 | static void check_ioctl_unit_attention(struct ctlr_info *h, | |
154 | struct CommandList *c); | |
303932fd DB |
155 | /* performant mode helper functions */ |
156 | static void calc_bucket_map(int *bucket, int num_buckets, | |
157 | int nsgs, int *bucket_map); | |
158 | static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); | |
159 | static inline u32 next_command(struct ctlr_info *h); | |
edd16368 SC |
160 | |
161 | static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); | |
162 | static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); | |
163 | static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); | |
164 | static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); | |
165 | ||
166 | static struct device_attribute *hpsa_sdev_attrs[] = { | |
167 | &dev_attr_raid_level, | |
168 | &dev_attr_lunid, | |
169 | &dev_attr_unique_id, | |
170 | NULL, | |
171 | }; | |
172 | ||
173 | static struct device_attribute *hpsa_shost_attrs[] = { | |
174 | &dev_attr_rescan, | |
175 | NULL, | |
176 | }; | |
177 | ||
178 | static struct scsi_host_template hpsa_driver_template = { | |
179 | .module = THIS_MODULE, | |
180 | .name = "hpsa", | |
181 | .proc_name = "hpsa", | |
182 | .queuecommand = hpsa_scsi_queue_command, | |
a08a8471 SC |
183 | .scan_start = hpsa_scan_start, |
184 | .scan_finished = hpsa_scan_finished, | |
edd16368 SC |
185 | .this_id = -1, |
186 | .sg_tablesize = MAXSGENTRIES, | |
edd16368 SC |
187 | .use_clustering = ENABLE_CLUSTERING, |
188 | .eh_device_reset_handler = hpsa_eh_device_reset_handler, | |
189 | .ioctl = hpsa_ioctl, | |
190 | .slave_alloc = hpsa_slave_alloc, | |
191 | .slave_destroy = hpsa_slave_destroy, | |
192 | #ifdef CONFIG_COMPAT | |
193 | .compat_ioctl = hpsa_compat_ioctl, | |
194 | #endif | |
195 | .sdev_attrs = hpsa_sdev_attrs, | |
196 | .shost_attrs = hpsa_shost_attrs, | |
197 | }; | |
198 | ||
199 | static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) | |
200 | { | |
201 | unsigned long *priv = shost_priv(sdev->host); | |
202 | return (struct ctlr_info *) *priv; | |
203 | } | |
204 | ||
a23513e8 SC |
205 | static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh) |
206 | { | |
207 | unsigned long *priv = shost_priv(sh); | |
208 | return (struct ctlr_info *) *priv; | |
209 | } | |
210 | ||
edd16368 SC |
211 | static struct task_struct *hpsa_scan_thread; |
212 | static DEFINE_MUTEX(hpsa_scan_mutex); | |
213 | static LIST_HEAD(hpsa_scan_q); | |
214 | static int hpsa_scan_func(void *data); | |
215 | ||
216 | /** | |
217 | * add_to_scan_list() - add controller to rescan queue | |
218 | * @h: Pointer to the controller. | |
219 | * | |
220 | * Adds the controller to the rescan queue if not already on the queue. | |
221 | * | |
222 | * returns 1 if added to the queue, 0 if skipped (could be on the | |
223 | * queue already, or the controller could be initializing or shutting | |
224 | * down). | |
225 | **/ | |
226 | static int add_to_scan_list(struct ctlr_info *h) | |
227 | { | |
228 | struct ctlr_info *test_h; | |
229 | int found = 0; | |
230 | int ret = 0; | |
231 | ||
232 | if (h->busy_initializing) | |
233 | return 0; | |
234 | ||
235 | /* | |
236 | * If we don't get the lock, it means the driver is unloading | |
237 | * and there's no point in scheduling a new scan. | |
238 | */ | |
239 | if (!mutex_trylock(&h->busy_shutting_down)) | |
240 | return 0; | |
241 | ||
242 | mutex_lock(&hpsa_scan_mutex); | |
243 | list_for_each_entry(test_h, &hpsa_scan_q, scan_list) { | |
244 | if (test_h == h) { | |
245 | found = 1; | |
246 | break; | |
247 | } | |
248 | } | |
249 | if (!found && !h->busy_scanning) { | |
250 | INIT_COMPLETION(h->scan_wait); | |
251 | list_add_tail(&h->scan_list, &hpsa_scan_q); | |
252 | ret = 1; | |
253 | } | |
254 | mutex_unlock(&hpsa_scan_mutex); | |
255 | mutex_unlock(&h->busy_shutting_down); | |
256 | ||
257 | return ret; | |
258 | } | |
259 | ||
260 | /** | |
261 | * remove_from_scan_list() - remove controller from rescan queue | |
262 | * @h: Pointer to the controller. | |
263 | * | |
264 | * Removes the controller from the rescan queue if present. Blocks if | |
265 | * the controller is currently conducting a rescan. The controller | |
266 | * can be in one of three states: | |
267 | * 1. Doesn't need a scan | |
268 | * 2. On the scan list, but not scanning yet (we remove it) | |
269 | * 3. Busy scanning (and not on the list). In this case we want to wait for | |
270 | * the scan to complete to make sure the scanning thread for this | |
271 | * controller is completely idle. | |
272 | **/ | |
273 | static void remove_from_scan_list(struct ctlr_info *h) | |
274 | { | |
275 | struct ctlr_info *test_h, *tmp_h; | |
276 | ||
277 | mutex_lock(&hpsa_scan_mutex); | |
278 | list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) { | |
279 | if (test_h == h) { /* state 2. */ | |
280 | list_del(&h->scan_list); | |
281 | complete_all(&h->scan_wait); | |
282 | mutex_unlock(&hpsa_scan_mutex); | |
283 | return; | |
284 | } | |
285 | } | |
286 | if (h->busy_scanning) { /* state 3. */ | |
287 | mutex_unlock(&hpsa_scan_mutex); | |
288 | wait_for_completion(&h->scan_wait); | |
289 | } else { /* state 1, nothing to do. */ | |
290 | mutex_unlock(&hpsa_scan_mutex); | |
291 | } | |
292 | } | |
293 | ||
294 | /* hpsa_scan_func() - kernel thread used to rescan controllers | |
295 | * @data: Ignored. | |
296 | * | |
297 | * A kernel thread used scan for drive topology changes on | |
298 | * controllers. The thread processes only one controller at a time | |
299 | * using a queue. Controllers are added to the queue using | |
300 | * add_to_scan_list() and removed from the queue either after done | |
301 | * processing or using remove_from_scan_list(). | |
302 | * | |
303 | * returns 0. | |
304 | **/ | |
305 | static int hpsa_scan_func(__attribute__((unused)) void *data) | |
306 | { | |
307 | struct ctlr_info *h; | |
308 | int host_no; | |
309 | ||
310 | while (1) { | |
311 | set_current_state(TASK_INTERRUPTIBLE); | |
312 | schedule(); | |
313 | if (kthread_should_stop()) | |
314 | break; | |
315 | ||
316 | while (1) { | |
317 | mutex_lock(&hpsa_scan_mutex); | |
318 | if (list_empty(&hpsa_scan_q)) { | |
319 | mutex_unlock(&hpsa_scan_mutex); | |
320 | break; | |
321 | } | |
322 | h = list_entry(hpsa_scan_q.next, struct ctlr_info, | |
323 | scan_list); | |
324 | list_del(&h->scan_list); | |
325 | h->busy_scanning = 1; | |
326 | mutex_unlock(&hpsa_scan_mutex); | |
327 | host_no = h->scsi_host ? h->scsi_host->host_no : -1; | |
a08a8471 | 328 | hpsa_scan_start(h->scsi_host); |
edd16368 SC |
329 | complete_all(&h->scan_wait); |
330 | mutex_lock(&hpsa_scan_mutex); | |
331 | h->busy_scanning = 0; | |
332 | mutex_unlock(&hpsa_scan_mutex); | |
333 | } | |
334 | } | |
335 | return 0; | |
336 | } | |
337 | ||
338 | static int check_for_unit_attention(struct ctlr_info *h, | |
339 | struct CommandList *c) | |
340 | { | |
341 | if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) | |
342 | return 0; | |
343 | ||
344 | switch (c->err_info->SenseInfo[12]) { | |
345 | case STATE_CHANGED: | |
346 | dev_warn(&h->pdev->dev, "hpsa%d: a state change " | |
347 | "detected, command retried\n", h->ctlr); | |
348 | break; | |
349 | case LUN_FAILED: | |
350 | dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " | |
351 | "detected, action required\n", h->ctlr); | |
352 | break; | |
353 | case REPORT_LUNS_CHANGED: | |
354 | dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " | |
355 | "changed\n", h->ctlr); | |
356 | /* | |
357 | * Here, we could call add_to_scan_list and wake up the scan thread, | |
358 | * except that it's quite likely that we will get more than one | |
359 | * REPORT_LUNS_CHANGED condition in quick succession, which means | |
360 | * that those which occur after the first one will likely happen | |
361 | * *during* the hpsa_scan_thread's rescan. And the rescan code is not | |
362 | * robust enough to restart in the middle, undoing what it has already | |
363 | * done, and it's not clear that it's even possible to do this, since | |
364 | * part of what it does is notify the SCSI mid layer, which starts | |
365 | * doing it's own i/o to read partition tables and so on, and the | |
366 | * driver doesn't have visibility to know what might need undoing. | |
367 | * In any event, if possible, it is horribly complicated to get right | |
368 | * so we just don't do it for now. | |
369 | * | |
370 | * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. | |
371 | */ | |
372 | break; | |
373 | case POWER_OR_RESET: | |
374 | dev_warn(&h->pdev->dev, "hpsa%d: a power on " | |
375 | "or device reset detected\n", h->ctlr); | |
376 | break; | |
377 | case UNIT_ATTENTION_CLEARED: | |
378 | dev_warn(&h->pdev->dev, "hpsa%d: unit attention " | |
379 | "cleared by another initiator\n", h->ctlr); | |
380 | break; | |
381 | default: | |
382 | dev_warn(&h->pdev->dev, "hpsa%d: unknown " | |
383 | "unit attention detected\n", h->ctlr); | |
384 | break; | |
385 | } | |
386 | return 1; | |
387 | } | |
388 | ||
389 | static ssize_t host_store_rescan(struct device *dev, | |
390 | struct device_attribute *attr, | |
391 | const char *buf, size_t count) | |
392 | { | |
393 | struct ctlr_info *h; | |
394 | struct Scsi_Host *shost = class_to_shost(dev); | |
a23513e8 | 395 | h = shost_to_hba(shost); |
edd16368 SC |
396 | if (add_to_scan_list(h)) { |
397 | wake_up_process(hpsa_scan_thread); | |
398 | wait_for_completion_interruptible(&h->scan_wait); | |
399 | } | |
400 | return count; | |
401 | } | |
402 | ||
403 | /* Enqueuing and dequeuing functions for cmdlists. */ | |
404 | static inline void addQ(struct hlist_head *list, struct CommandList *c) | |
405 | { | |
406 | hlist_add_head(&c->list, list); | |
407 | } | |
408 | ||
303932fd DB |
409 | static inline u32 next_command(struct ctlr_info *h) |
410 | { | |
411 | u32 a; | |
412 | ||
413 | if (unlikely(h->transMethod != CFGTBL_Trans_Performant)) | |
414 | return h->access.command_completed(h); | |
415 | ||
416 | if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { | |
417 | a = *(h->reply_pool_head); /* Next cmd in ring buffer */ | |
418 | (h->reply_pool_head)++; | |
419 | h->commands_outstanding--; | |
420 | } else { | |
421 | a = FIFO_EMPTY; | |
422 | } | |
423 | /* Check for wraparound */ | |
424 | if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { | |
425 | h->reply_pool_head = h->reply_pool; | |
426 | h->reply_pool_wraparound ^= 1; | |
427 | } | |
428 | return a; | |
429 | } | |
430 | ||
431 | /* set_performant_mode: Modify the tag for cciss performant | |
432 | * set bit 0 for pull model, bits 3-1 for block fetch | |
433 | * register number | |
434 | */ | |
435 | static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) | |
436 | { | |
437 | if (likely(h->transMethod == CFGTBL_Trans_Performant)) | |
438 | c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); | |
439 | } | |
440 | ||
edd16368 SC |
441 | static void enqueue_cmd_and_start_io(struct ctlr_info *h, |
442 | struct CommandList *c) | |
443 | { | |
444 | unsigned long flags; | |
303932fd DB |
445 | |
446 | set_performant_mode(h, c); | |
edd16368 SC |
447 | spin_lock_irqsave(&h->lock, flags); |
448 | addQ(&h->reqQ, c); | |
449 | h->Qdepth++; | |
450 | start_io(h); | |
451 | spin_unlock_irqrestore(&h->lock, flags); | |
452 | } | |
453 | ||
454 | static inline void removeQ(struct CommandList *c) | |
455 | { | |
456 | if (WARN_ON(hlist_unhashed(&c->list))) | |
457 | return; | |
458 | hlist_del_init(&c->list); | |
459 | } | |
460 | ||
461 | static inline int is_hba_lunid(unsigned char scsi3addr[]) | |
462 | { | |
463 | return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; | |
464 | } | |
465 | ||
466 | static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) | |
467 | { | |
468 | return (scsi3addr[3] & 0xC0) == 0x40; | |
469 | } | |
470 | ||
339b2b14 SC |
471 | static inline int is_scsi_rev_5(struct ctlr_info *h) |
472 | { | |
473 | if (!h->hba_inquiry_data) | |
474 | return 0; | |
475 | if ((h->hba_inquiry_data[2] & 0x07) == 5) | |
476 | return 1; | |
477 | return 0; | |
478 | } | |
479 | ||
edd16368 SC |
480 | static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", |
481 | "UNKNOWN" | |
482 | }; | |
483 | #define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) | |
484 | ||
485 | static ssize_t raid_level_show(struct device *dev, | |
486 | struct device_attribute *attr, char *buf) | |
487 | { | |
488 | ssize_t l = 0; | |
82a72c0a | 489 | unsigned char rlevel; |
edd16368 SC |
490 | struct ctlr_info *h; |
491 | struct scsi_device *sdev; | |
492 | struct hpsa_scsi_dev_t *hdev; | |
493 | unsigned long flags; | |
494 | ||
495 | sdev = to_scsi_device(dev); | |
496 | h = sdev_to_hba(sdev); | |
497 | spin_lock_irqsave(&h->lock, flags); | |
498 | hdev = sdev->hostdata; | |
499 | if (!hdev) { | |
500 | spin_unlock_irqrestore(&h->lock, flags); | |
501 | return -ENODEV; | |
502 | } | |
503 | ||
504 | /* Is this even a logical drive? */ | |
505 | if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { | |
506 | spin_unlock_irqrestore(&h->lock, flags); | |
507 | l = snprintf(buf, PAGE_SIZE, "N/A\n"); | |
508 | return l; | |
509 | } | |
510 | ||
511 | rlevel = hdev->raid_level; | |
512 | spin_unlock_irqrestore(&h->lock, flags); | |
82a72c0a | 513 | if (rlevel > RAID_UNKNOWN) |
edd16368 SC |
514 | rlevel = RAID_UNKNOWN; |
515 | l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); | |
516 | return l; | |
517 | } | |
518 | ||
519 | static ssize_t lunid_show(struct device *dev, | |
520 | struct device_attribute *attr, char *buf) | |
521 | { | |
522 | struct ctlr_info *h; | |
523 | struct scsi_device *sdev; | |
524 | struct hpsa_scsi_dev_t *hdev; | |
525 | unsigned long flags; | |
526 | unsigned char lunid[8]; | |
527 | ||
528 | sdev = to_scsi_device(dev); | |
529 | h = sdev_to_hba(sdev); | |
530 | spin_lock_irqsave(&h->lock, flags); | |
531 | hdev = sdev->hostdata; | |
532 | if (!hdev) { | |
533 | spin_unlock_irqrestore(&h->lock, flags); | |
534 | return -ENODEV; | |
535 | } | |
536 | memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); | |
537 | spin_unlock_irqrestore(&h->lock, flags); | |
538 | return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", | |
539 | lunid[0], lunid[1], lunid[2], lunid[3], | |
540 | lunid[4], lunid[5], lunid[6], lunid[7]); | |
541 | } | |
542 | ||
543 | static ssize_t unique_id_show(struct device *dev, | |
544 | struct device_attribute *attr, char *buf) | |
545 | { | |
546 | struct ctlr_info *h; | |
547 | struct scsi_device *sdev; | |
548 | struct hpsa_scsi_dev_t *hdev; | |
549 | unsigned long flags; | |
550 | unsigned char sn[16]; | |
551 | ||
552 | sdev = to_scsi_device(dev); | |
553 | h = sdev_to_hba(sdev); | |
554 | spin_lock_irqsave(&h->lock, flags); | |
555 | hdev = sdev->hostdata; | |
556 | if (!hdev) { | |
557 | spin_unlock_irqrestore(&h->lock, flags); | |
558 | return -ENODEV; | |
559 | } | |
560 | memcpy(sn, hdev->device_id, sizeof(sn)); | |
561 | spin_unlock_irqrestore(&h->lock, flags); | |
562 | return snprintf(buf, 16 * 2 + 2, | |
563 | "%02X%02X%02X%02X%02X%02X%02X%02X" | |
564 | "%02X%02X%02X%02X%02X%02X%02X%02X\n", | |
565 | sn[0], sn[1], sn[2], sn[3], | |
566 | sn[4], sn[5], sn[6], sn[7], | |
567 | sn[8], sn[9], sn[10], sn[11], | |
568 | sn[12], sn[13], sn[14], sn[15]); | |
569 | } | |
570 | ||
571 | static int hpsa_find_target_lun(struct ctlr_info *h, | |
572 | unsigned char scsi3addr[], int bus, int *target, int *lun) | |
573 | { | |
574 | /* finds an unused bus, target, lun for a new physical device | |
575 | * assumes h->devlock is held | |
576 | */ | |
577 | int i, found = 0; | |
578 | DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); | |
579 | ||
580 | memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); | |
581 | ||
582 | for (i = 0; i < h->ndevices; i++) { | |
583 | if (h->dev[i]->bus == bus && h->dev[i]->target != -1) | |
584 | set_bit(h->dev[i]->target, lun_taken); | |
585 | } | |
586 | ||
587 | for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { | |
588 | if (!test_bit(i, lun_taken)) { | |
589 | /* *bus = 1; */ | |
590 | *target = i; | |
591 | *lun = 0; | |
592 | found = 1; | |
593 | break; | |
594 | } | |
595 | } | |
596 | return !found; | |
597 | } | |
598 | ||
599 | /* Add an entry into h->dev[] array. */ | |
600 | static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, | |
601 | struct hpsa_scsi_dev_t *device, | |
602 | struct hpsa_scsi_dev_t *added[], int *nadded) | |
603 | { | |
604 | /* assumes h->devlock is held */ | |
605 | int n = h->ndevices; | |
606 | int i; | |
607 | unsigned char addr1[8], addr2[8]; | |
608 | struct hpsa_scsi_dev_t *sd; | |
609 | ||
610 | if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { | |
611 | dev_err(&h->pdev->dev, "too many devices, some will be " | |
612 | "inaccessible.\n"); | |
613 | return -1; | |
614 | } | |
615 | ||
616 | /* physical devices do not have lun or target assigned until now. */ | |
617 | if (device->lun != -1) | |
618 | /* Logical device, lun is already assigned. */ | |
619 | goto lun_assigned; | |
620 | ||
621 | /* If this device a non-zero lun of a multi-lun device | |
622 | * byte 4 of the 8-byte LUN addr will contain the logical | |
623 | * unit no, zero otherise. | |
624 | */ | |
625 | if (device->scsi3addr[4] == 0) { | |
626 | /* This is not a non-zero lun of a multi-lun device */ | |
627 | if (hpsa_find_target_lun(h, device->scsi3addr, | |
628 | device->bus, &device->target, &device->lun) != 0) | |
629 | return -1; | |
630 | goto lun_assigned; | |
631 | } | |
632 | ||
633 | /* This is a non-zero lun of a multi-lun device. | |
634 | * Search through our list and find the device which | |
635 | * has the same 8 byte LUN address, excepting byte 4. | |
636 | * Assign the same bus and target for this new LUN. | |
637 | * Use the logical unit number from the firmware. | |
638 | */ | |
639 | memcpy(addr1, device->scsi3addr, 8); | |
640 | addr1[4] = 0; | |
641 | for (i = 0; i < n; i++) { | |
642 | sd = h->dev[i]; | |
643 | memcpy(addr2, sd->scsi3addr, 8); | |
644 | addr2[4] = 0; | |
645 | /* differ only in byte 4? */ | |
646 | if (memcmp(addr1, addr2, 8) == 0) { | |
647 | device->bus = sd->bus; | |
648 | device->target = sd->target; | |
649 | device->lun = device->scsi3addr[4]; | |
650 | break; | |
651 | } | |
652 | } | |
653 | if (device->lun == -1) { | |
654 | dev_warn(&h->pdev->dev, "physical device with no LUN=0," | |
655 | " suspect firmware bug or unsupported hardware " | |
656 | "configuration.\n"); | |
657 | return -1; | |
658 | } | |
659 | ||
660 | lun_assigned: | |
661 | ||
662 | h->dev[n] = device; | |
663 | h->ndevices++; | |
664 | added[*nadded] = device; | |
665 | (*nadded)++; | |
666 | ||
667 | /* initially, (before registering with scsi layer) we don't | |
668 | * know our hostno and we don't want to print anything first | |
669 | * time anyway (the scsi layer's inquiries will show that info) | |
670 | */ | |
671 | /* if (hostno != -1) */ | |
672 | dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", | |
673 | scsi_device_type(device->devtype), hostno, | |
674 | device->bus, device->target, device->lun); | |
675 | return 0; | |
676 | } | |
677 | ||
2a8ccf31 SC |
678 | /* Replace an entry from h->dev[] array. */ |
679 | static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, | |
680 | int entry, struct hpsa_scsi_dev_t *new_entry, | |
681 | struct hpsa_scsi_dev_t *added[], int *nadded, | |
682 | struct hpsa_scsi_dev_t *removed[], int *nremoved) | |
683 | { | |
684 | /* assumes h->devlock is held */ | |
685 | BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); | |
686 | removed[*nremoved] = h->dev[entry]; | |
687 | (*nremoved)++; | |
688 | h->dev[entry] = new_entry; | |
689 | added[*nadded] = new_entry; | |
690 | (*nadded)++; | |
691 | dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n", | |
692 | scsi_device_type(new_entry->devtype), hostno, new_entry->bus, | |
693 | new_entry->target, new_entry->lun); | |
694 | } | |
695 | ||
edd16368 SC |
696 | /* Remove an entry from h->dev[] array. */ |
697 | static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, | |
698 | struct hpsa_scsi_dev_t *removed[], int *nremoved) | |
699 | { | |
700 | /* assumes h->devlock is held */ | |
701 | int i; | |
702 | struct hpsa_scsi_dev_t *sd; | |
703 | ||
b2ed4f79 | 704 | BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); |
edd16368 SC |
705 | |
706 | sd = h->dev[entry]; | |
707 | removed[*nremoved] = h->dev[entry]; | |
708 | (*nremoved)++; | |
709 | ||
710 | for (i = entry; i < h->ndevices-1; i++) | |
711 | h->dev[i] = h->dev[i+1]; | |
712 | h->ndevices--; | |
713 | dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", | |
714 | scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, | |
715 | sd->lun); | |
716 | } | |
717 | ||
718 | #define SCSI3ADDR_EQ(a, b) ( \ | |
719 | (a)[7] == (b)[7] && \ | |
720 | (a)[6] == (b)[6] && \ | |
721 | (a)[5] == (b)[5] && \ | |
722 | (a)[4] == (b)[4] && \ | |
723 | (a)[3] == (b)[3] && \ | |
724 | (a)[2] == (b)[2] && \ | |
725 | (a)[1] == (b)[1] && \ | |
726 | (a)[0] == (b)[0]) | |
727 | ||
728 | static void fixup_botched_add(struct ctlr_info *h, | |
729 | struct hpsa_scsi_dev_t *added) | |
730 | { | |
731 | /* called when scsi_add_device fails in order to re-adjust | |
732 | * h->dev[] to match the mid layer's view. | |
733 | */ | |
734 | unsigned long flags; | |
735 | int i, j; | |
736 | ||
737 | spin_lock_irqsave(&h->lock, flags); | |
738 | for (i = 0; i < h->ndevices; i++) { | |
739 | if (h->dev[i] == added) { | |
740 | for (j = i; j < h->ndevices-1; j++) | |
741 | h->dev[j] = h->dev[j+1]; | |
742 | h->ndevices--; | |
743 | break; | |
744 | } | |
745 | } | |
746 | spin_unlock_irqrestore(&h->lock, flags); | |
747 | kfree(added); | |
748 | } | |
749 | ||
750 | static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, | |
751 | struct hpsa_scsi_dev_t *dev2) | |
752 | { | |
753 | if ((is_logical_dev_addr_mode(dev1->scsi3addr) || | |
754 | (dev1->lun != -1 && dev2->lun != -1)) && | |
755 | dev1->devtype != 0x0C) | |
756 | return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); | |
757 | ||
758 | /* we compare everything except lun and target as these | |
759 | * are not yet assigned. Compare parts likely | |
760 | * to differ first | |
761 | */ | |
762 | if (memcmp(dev1->scsi3addr, dev2->scsi3addr, | |
763 | sizeof(dev1->scsi3addr)) != 0) | |
764 | return 0; | |
765 | if (memcmp(dev1->device_id, dev2->device_id, | |
766 | sizeof(dev1->device_id)) != 0) | |
767 | return 0; | |
768 | if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) | |
769 | return 0; | |
770 | if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) | |
771 | return 0; | |
772 | if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) | |
773 | return 0; | |
774 | if (dev1->devtype != dev2->devtype) | |
775 | return 0; | |
776 | if (dev1->raid_level != dev2->raid_level) | |
777 | return 0; | |
778 | if (dev1->bus != dev2->bus) | |
779 | return 0; | |
780 | return 1; | |
781 | } | |
782 | ||
783 | /* Find needle in haystack. If exact match found, return DEVICE_SAME, | |
784 | * and return needle location in *index. If scsi3addr matches, but not | |
785 | * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle | |
786 | * location in *index. If needle not found, return DEVICE_NOT_FOUND. | |
787 | */ | |
788 | static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, | |
789 | struct hpsa_scsi_dev_t *haystack[], int haystack_size, | |
790 | int *index) | |
791 | { | |
792 | int i; | |
793 | #define DEVICE_NOT_FOUND 0 | |
794 | #define DEVICE_CHANGED 1 | |
795 | #define DEVICE_SAME 2 | |
796 | for (i = 0; i < haystack_size; i++) { | |
23231048 SC |
797 | if (haystack[i] == NULL) /* previously removed. */ |
798 | continue; | |
edd16368 SC |
799 | if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { |
800 | *index = i; | |
801 | if (device_is_the_same(needle, haystack[i])) | |
802 | return DEVICE_SAME; | |
803 | else | |
804 | return DEVICE_CHANGED; | |
805 | } | |
806 | } | |
807 | *index = -1; | |
808 | return DEVICE_NOT_FOUND; | |
809 | } | |
810 | ||
4967bd3e | 811 | static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, |
edd16368 SC |
812 | struct hpsa_scsi_dev_t *sd[], int nsds) |
813 | { | |
814 | /* sd contains scsi3 addresses and devtypes, and inquiry | |
815 | * data. This function takes what's in sd to be the current | |
816 | * reality and updates h->dev[] to reflect that reality. | |
817 | */ | |
818 | int i, entry, device_change, changes = 0; | |
819 | struct hpsa_scsi_dev_t *csd; | |
820 | unsigned long flags; | |
821 | struct hpsa_scsi_dev_t **added, **removed; | |
822 | int nadded, nremoved; | |
823 | struct Scsi_Host *sh = NULL; | |
824 | ||
825 | added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, | |
826 | GFP_KERNEL); | |
827 | removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, | |
828 | GFP_KERNEL); | |
829 | ||
830 | if (!added || !removed) { | |
831 | dev_warn(&h->pdev->dev, "out of memory in " | |
832 | "adjust_hpsa_scsi_table\n"); | |
833 | goto free_and_out; | |
834 | } | |
835 | ||
836 | spin_lock_irqsave(&h->devlock, flags); | |
837 | ||
838 | /* find any devices in h->dev[] that are not in | |
839 | * sd[] and remove them from h->dev[], and for any | |
840 | * devices which have changed, remove the old device | |
841 | * info and add the new device info. | |
842 | */ | |
843 | i = 0; | |
844 | nremoved = 0; | |
845 | nadded = 0; | |
846 | while (i < h->ndevices) { | |
847 | csd = h->dev[i]; | |
848 | device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); | |
849 | if (device_change == DEVICE_NOT_FOUND) { | |
850 | changes++; | |
851 | hpsa_scsi_remove_entry(h, hostno, i, | |
852 | removed, &nremoved); | |
853 | continue; /* remove ^^^, hence i not incremented */ | |
854 | } else if (device_change == DEVICE_CHANGED) { | |
855 | changes++; | |
2a8ccf31 SC |
856 | hpsa_scsi_replace_entry(h, hostno, i, sd[entry], |
857 | added, &nadded, removed, &nremoved); | |
c7f172dc SC |
858 | /* Set it to NULL to prevent it from being freed |
859 | * at the bottom of hpsa_update_scsi_devices() | |
860 | */ | |
861 | sd[entry] = NULL; | |
edd16368 SC |
862 | } |
863 | i++; | |
864 | } | |
865 | ||
866 | /* Now, make sure every device listed in sd[] is also | |
867 | * listed in h->dev[], adding them if they aren't found | |
868 | */ | |
869 | ||
870 | for (i = 0; i < nsds; i++) { | |
871 | if (!sd[i]) /* if already added above. */ | |
872 | continue; | |
873 | device_change = hpsa_scsi_find_entry(sd[i], h->dev, | |
874 | h->ndevices, &entry); | |
875 | if (device_change == DEVICE_NOT_FOUND) { | |
876 | changes++; | |
877 | if (hpsa_scsi_add_entry(h, hostno, sd[i], | |
878 | added, &nadded) != 0) | |
879 | break; | |
880 | sd[i] = NULL; /* prevent from being freed later. */ | |
881 | } else if (device_change == DEVICE_CHANGED) { | |
882 | /* should never happen... */ | |
883 | changes++; | |
884 | dev_warn(&h->pdev->dev, | |
885 | "device unexpectedly changed.\n"); | |
886 | /* but if it does happen, we just ignore that device */ | |
887 | } | |
888 | } | |
889 | spin_unlock_irqrestore(&h->devlock, flags); | |
890 | ||
891 | /* Don't notify scsi mid layer of any changes the first time through | |
892 | * (or if there are no changes) scsi_scan_host will do it later the | |
893 | * first time through. | |
894 | */ | |
895 | if (hostno == -1 || !changes) | |
896 | goto free_and_out; | |
897 | ||
898 | sh = h->scsi_host; | |
899 | /* Notify scsi mid layer of any removed devices */ | |
900 | for (i = 0; i < nremoved; i++) { | |
901 | struct scsi_device *sdev = | |
902 | scsi_device_lookup(sh, removed[i]->bus, | |
903 | removed[i]->target, removed[i]->lun); | |
904 | if (sdev != NULL) { | |
905 | scsi_remove_device(sdev); | |
906 | scsi_device_put(sdev); | |
907 | } else { | |
908 | /* We don't expect to get here. | |
909 | * future cmds to this device will get selection | |
910 | * timeout as if the device was gone. | |
911 | */ | |
912 | dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " | |
913 | " for removal.", hostno, removed[i]->bus, | |
914 | removed[i]->target, removed[i]->lun); | |
915 | } | |
916 | kfree(removed[i]); | |
917 | removed[i] = NULL; | |
918 | } | |
919 | ||
920 | /* Notify scsi mid layer of any added devices */ | |
921 | for (i = 0; i < nadded; i++) { | |
922 | if (scsi_add_device(sh, added[i]->bus, | |
923 | added[i]->target, added[i]->lun) == 0) | |
924 | continue; | |
925 | dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " | |
926 | "device not added.\n", hostno, added[i]->bus, | |
927 | added[i]->target, added[i]->lun); | |
928 | /* now we have to remove it from h->dev, | |
929 | * since it didn't get added to scsi mid layer | |
930 | */ | |
931 | fixup_botched_add(h, added[i]); | |
932 | } | |
933 | ||
934 | free_and_out: | |
935 | kfree(added); | |
936 | kfree(removed); | |
edd16368 SC |
937 | } |
938 | ||
939 | /* | |
940 | * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * | |
941 | * Assume's h->devlock is held. | |
942 | */ | |
943 | static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, | |
944 | int bus, int target, int lun) | |
945 | { | |
946 | int i; | |
947 | struct hpsa_scsi_dev_t *sd; | |
948 | ||
949 | for (i = 0; i < h->ndevices; i++) { | |
950 | sd = h->dev[i]; | |
951 | if (sd->bus == bus && sd->target == target && sd->lun == lun) | |
952 | return sd; | |
953 | } | |
954 | return NULL; | |
955 | } | |
956 | ||
957 | /* link sdev->hostdata to our per-device structure. */ | |
958 | static int hpsa_slave_alloc(struct scsi_device *sdev) | |
959 | { | |
960 | struct hpsa_scsi_dev_t *sd; | |
961 | unsigned long flags; | |
962 | struct ctlr_info *h; | |
963 | ||
964 | h = sdev_to_hba(sdev); | |
965 | spin_lock_irqsave(&h->devlock, flags); | |
966 | sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), | |
967 | sdev_id(sdev), sdev->lun); | |
968 | if (sd != NULL) | |
969 | sdev->hostdata = sd; | |
970 | spin_unlock_irqrestore(&h->devlock, flags); | |
971 | return 0; | |
972 | } | |
973 | ||
974 | static void hpsa_slave_destroy(struct scsi_device *sdev) | |
975 | { | |
bcc44255 | 976 | /* nothing to do. */ |
edd16368 SC |
977 | } |
978 | ||
979 | static void hpsa_scsi_setup(struct ctlr_info *h) | |
980 | { | |
981 | h->ndevices = 0; | |
982 | h->scsi_host = NULL; | |
983 | spin_lock_init(&h->devlock); | |
edd16368 SC |
984 | } |
985 | ||
986 | static void complete_scsi_command(struct CommandList *cp, | |
01a02ffc | 987 | int timeout, u32 tag) |
edd16368 SC |
988 | { |
989 | struct scsi_cmnd *cmd; | |
990 | struct ctlr_info *h; | |
991 | struct ErrorInfo *ei; | |
992 | ||
993 | unsigned char sense_key; | |
994 | unsigned char asc; /* additional sense code */ | |
995 | unsigned char ascq; /* additional sense code qualifier */ | |
996 | ||
997 | ei = cp->err_info; | |
998 | cmd = (struct scsi_cmnd *) cp->scsi_cmd; | |
999 | h = cp->h; | |
1000 | ||
1001 | scsi_dma_unmap(cmd); /* undo the DMA mappings */ | |
1002 | ||
1003 | cmd->result = (DID_OK << 16); /* host byte */ | |
1004 | cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ | |
1005 | cmd->result |= (ei->ScsiStatus << 1); | |
1006 | ||
1007 | /* copy the sense data whether we need to or not. */ | |
1008 | memcpy(cmd->sense_buffer, ei->SenseInfo, | |
1009 | ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? | |
1010 | SCSI_SENSE_BUFFERSIZE : | |
1011 | ei->SenseLen); | |
1012 | scsi_set_resid(cmd, ei->ResidualCnt); | |
1013 | ||
1014 | if (ei->CommandStatus == 0) { | |
1015 | cmd->scsi_done(cmd); | |
1016 | cmd_free(h, cp); | |
1017 | return; | |
1018 | } | |
1019 | ||
1020 | /* an error has occurred */ | |
1021 | switch (ei->CommandStatus) { | |
1022 | ||
1023 | case CMD_TARGET_STATUS: | |
1024 | if (ei->ScsiStatus) { | |
1025 | /* Get sense key */ | |
1026 | sense_key = 0xf & ei->SenseInfo[2]; | |
1027 | /* Get additional sense code */ | |
1028 | asc = ei->SenseInfo[12]; | |
1029 | /* Get addition sense code qualifier */ | |
1030 | ascq = ei->SenseInfo[13]; | |
1031 | } | |
1032 | ||
1033 | if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { | |
1034 | if (check_for_unit_attention(h, cp)) { | |
1035 | cmd->result = DID_SOFT_ERROR << 16; | |
1036 | break; | |
1037 | } | |
1038 | if (sense_key == ILLEGAL_REQUEST) { | |
1039 | /* | |
1040 | * SCSI REPORT_LUNS is commonly unsupported on | |
1041 | * Smart Array. Suppress noisy complaint. | |
1042 | */ | |
1043 | if (cp->Request.CDB[0] == REPORT_LUNS) | |
1044 | break; | |
1045 | ||
1046 | /* If ASC/ASCQ indicate Logical Unit | |
1047 | * Not Supported condition, | |
1048 | */ | |
1049 | if ((asc == 0x25) && (ascq == 0x0)) { | |
1050 | dev_warn(&h->pdev->dev, "cp %p " | |
1051 | "has check condition\n", cp); | |
1052 | break; | |
1053 | } | |
1054 | } | |
1055 | ||
1056 | if (sense_key == NOT_READY) { | |
1057 | /* If Sense is Not Ready, Logical Unit | |
1058 | * Not ready, Manual Intervention | |
1059 | * required | |
1060 | */ | |
1061 | if ((asc == 0x04) && (ascq == 0x03)) { | |
edd16368 SC |
1062 | dev_warn(&h->pdev->dev, "cp %p " |
1063 | "has check condition: unit " | |
1064 | "not ready, manual " | |
1065 | "intervention required\n", cp); | |
1066 | break; | |
1067 | } | |
1068 | } | |
1d3b3609 MG |
1069 | if (sense_key == ABORTED_COMMAND) { |
1070 | /* Aborted command is retryable */ | |
1071 | dev_warn(&h->pdev->dev, "cp %p " | |
1072 | "has check condition: aborted command: " | |
1073 | "ASC: 0x%x, ASCQ: 0x%x\n", | |
1074 | cp, asc, ascq); | |
1075 | cmd->result = DID_SOFT_ERROR << 16; | |
1076 | break; | |
1077 | } | |
edd16368 SC |
1078 | /* Must be some other type of check condition */ |
1079 | dev_warn(&h->pdev->dev, "cp %p has check condition: " | |
1080 | "unknown type: " | |
1081 | "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " | |
1082 | "Returning result: 0x%x, " | |
1083 | "cmd=[%02x %02x %02x %02x %02x " | |
807be732 | 1084 | "%02x %02x %02x %02x %02x %02x " |
edd16368 SC |
1085 | "%02x %02x %02x %02x %02x]\n", |
1086 | cp, sense_key, asc, ascq, | |
1087 | cmd->result, | |
1088 | cmd->cmnd[0], cmd->cmnd[1], | |
1089 | cmd->cmnd[2], cmd->cmnd[3], | |
1090 | cmd->cmnd[4], cmd->cmnd[5], | |
1091 | cmd->cmnd[6], cmd->cmnd[7], | |
807be732 MM |
1092 | cmd->cmnd[8], cmd->cmnd[9], |
1093 | cmd->cmnd[10], cmd->cmnd[11], | |
1094 | cmd->cmnd[12], cmd->cmnd[13], | |
1095 | cmd->cmnd[14], cmd->cmnd[15]); | |
edd16368 SC |
1096 | break; |
1097 | } | |
1098 | ||
1099 | ||
1100 | /* Problem was not a check condition | |
1101 | * Pass it up to the upper layers... | |
1102 | */ | |
1103 | if (ei->ScsiStatus) { | |
1104 | dev_warn(&h->pdev->dev, "cp %p has status 0x%x " | |
1105 | "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " | |
1106 | "Returning result: 0x%x\n", | |
1107 | cp, ei->ScsiStatus, | |
1108 | sense_key, asc, ascq, | |
1109 | cmd->result); | |
1110 | } else { /* scsi status is zero??? How??? */ | |
1111 | dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " | |
1112 | "Returning no connection.\n", cp), | |
1113 | ||
1114 | /* Ordinarily, this case should never happen, | |
1115 | * but there is a bug in some released firmware | |
1116 | * revisions that allows it to happen if, for | |
1117 | * example, a 4100 backplane loses power and | |
1118 | * the tape drive is in it. We assume that | |
1119 | * it's a fatal error of some kind because we | |
1120 | * can't show that it wasn't. We will make it | |
1121 | * look like selection timeout since that is | |
1122 | * the most common reason for this to occur, | |
1123 | * and it's severe enough. | |
1124 | */ | |
1125 | ||
1126 | cmd->result = DID_NO_CONNECT << 16; | |
1127 | } | |
1128 | break; | |
1129 | ||
1130 | case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ | |
1131 | break; | |
1132 | case CMD_DATA_OVERRUN: | |
1133 | dev_warn(&h->pdev->dev, "cp %p has" | |
1134 | " completed with data overrun " | |
1135 | "reported\n", cp); | |
1136 | break; | |
1137 | case CMD_INVALID: { | |
1138 | /* print_bytes(cp, sizeof(*cp), 1, 0); | |
1139 | print_cmd(cp); */ | |
1140 | /* We get CMD_INVALID if you address a non-existent device | |
1141 | * instead of a selection timeout (no response). You will | |
1142 | * see this if you yank out a drive, then try to access it. | |
1143 | * This is kind of a shame because it means that any other | |
1144 | * CMD_INVALID (e.g. driver bug) will get interpreted as a | |
1145 | * missing target. */ | |
1146 | cmd->result = DID_NO_CONNECT << 16; | |
1147 | } | |
1148 | break; | |
1149 | case CMD_PROTOCOL_ERR: | |
1150 | dev_warn(&h->pdev->dev, "cp %p has " | |
1151 | "protocol error \n", cp); | |
1152 | break; | |
1153 | case CMD_HARDWARE_ERR: | |
1154 | cmd->result = DID_ERROR << 16; | |
1155 | dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); | |
1156 | break; | |
1157 | case CMD_CONNECTION_LOST: | |
1158 | cmd->result = DID_ERROR << 16; | |
1159 | dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); | |
1160 | break; | |
1161 | case CMD_ABORTED: | |
1162 | cmd->result = DID_ABORT << 16; | |
1163 | dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", | |
1164 | cp, ei->ScsiStatus); | |
1165 | break; | |
1166 | case CMD_ABORT_FAILED: | |
1167 | cmd->result = DID_ERROR << 16; | |
1168 | dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); | |
1169 | break; | |
1170 | case CMD_UNSOLICITED_ABORT: | |
5f0325ab | 1171 | cmd->result = DID_RESET << 16; |
edd16368 SC |
1172 | dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " |
1173 | "abort\n", cp); | |
1174 | break; | |
1175 | case CMD_TIMEOUT: | |
1176 | cmd->result = DID_TIME_OUT << 16; | |
1177 | dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); | |
1178 | break; | |
1179 | default: | |
1180 | cmd->result = DID_ERROR << 16; | |
1181 | dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", | |
1182 | cp, ei->CommandStatus); | |
1183 | } | |
1184 | cmd->scsi_done(cmd); | |
1185 | cmd_free(h, cp); | |
1186 | } | |
1187 | ||
1188 | static int hpsa_scsi_detect(struct ctlr_info *h) | |
1189 | { | |
1190 | struct Scsi_Host *sh; | |
1191 | int error; | |
1192 | ||
1193 | sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); | |
1194 | if (sh == NULL) | |
1195 | goto fail; | |
1196 | ||
1197 | sh->io_port = 0; | |
1198 | sh->n_io_port = 0; | |
1199 | sh->this_id = -1; | |
1200 | sh->max_channel = 3; | |
1201 | sh->max_cmd_len = MAX_COMMAND_SIZE; | |
1202 | sh->max_lun = HPSA_MAX_LUN; | |
1203 | sh->max_id = HPSA_MAX_LUN; | |
303932fd DB |
1204 | sh->can_queue = h->nr_cmds; |
1205 | sh->cmd_per_lun = h->nr_cmds; | |
edd16368 SC |
1206 | h->scsi_host = sh; |
1207 | sh->hostdata[0] = (unsigned long) h; | |
303932fd | 1208 | sh->irq = h->intr[PERF_MODE_INT]; |
edd16368 SC |
1209 | sh->unique_id = sh->irq; |
1210 | error = scsi_add_host(sh, &h->pdev->dev); | |
1211 | if (error) | |
1212 | goto fail_host_put; | |
1213 | scsi_scan_host(sh); | |
1214 | return 0; | |
1215 | ||
1216 | fail_host_put: | |
1217 | dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" | |
1218 | " failed for controller %d\n", h->ctlr); | |
1219 | scsi_host_put(sh); | |
ecd9aad4 | 1220 | return error; |
edd16368 SC |
1221 | fail: |
1222 | dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" | |
1223 | " failed for controller %d\n", h->ctlr); | |
ecd9aad4 | 1224 | return -ENOMEM; |
edd16368 SC |
1225 | } |
1226 | ||
1227 | static void hpsa_pci_unmap(struct pci_dev *pdev, | |
1228 | struct CommandList *c, int sg_used, int data_direction) | |
1229 | { | |
1230 | int i; | |
1231 | union u64bit addr64; | |
1232 | ||
1233 | for (i = 0; i < sg_used; i++) { | |
1234 | addr64.val32.lower = c->SG[i].Addr.lower; | |
1235 | addr64.val32.upper = c->SG[i].Addr.upper; | |
1236 | pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, | |
1237 | data_direction); | |
1238 | } | |
1239 | } | |
1240 | ||
1241 | static void hpsa_map_one(struct pci_dev *pdev, | |
1242 | struct CommandList *cp, | |
1243 | unsigned char *buf, | |
1244 | size_t buflen, | |
1245 | int data_direction) | |
1246 | { | |
01a02ffc | 1247 | u64 addr64; |
edd16368 SC |
1248 | |
1249 | if (buflen == 0 || data_direction == PCI_DMA_NONE) { | |
1250 | cp->Header.SGList = 0; | |
1251 | cp->Header.SGTotal = 0; | |
1252 | return; | |
1253 | } | |
1254 | ||
01a02ffc | 1255 | addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction); |
edd16368 | 1256 | cp->SG[0].Addr.lower = |
01a02ffc | 1257 | (u32) (addr64 & (u64) 0x00000000FFFFFFFF); |
edd16368 | 1258 | cp->SG[0].Addr.upper = |
01a02ffc | 1259 | (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF); |
edd16368 | 1260 | cp->SG[0].Len = buflen; |
01a02ffc SC |
1261 | cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */ |
1262 | cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */ | |
edd16368 SC |
1263 | } |
1264 | ||
1265 | static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, | |
1266 | struct CommandList *c) | |
1267 | { | |
1268 | DECLARE_COMPLETION_ONSTACK(wait); | |
1269 | ||
1270 | c->waiting = &wait; | |
1271 | enqueue_cmd_and_start_io(h, c); | |
1272 | wait_for_completion(&wait); | |
1273 | } | |
1274 | ||
1275 | static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, | |
1276 | struct CommandList *c, int data_direction) | |
1277 | { | |
1278 | int retry_count = 0; | |
1279 | ||
1280 | do { | |
1281 | memset(c->err_info, 0, sizeof(c->err_info)); | |
1282 | hpsa_scsi_do_simple_cmd_core(h, c); | |
1283 | retry_count++; | |
1284 | } while (check_for_unit_attention(h, c) && retry_count <= 3); | |
1285 | hpsa_pci_unmap(h->pdev, c, 1, data_direction); | |
1286 | } | |
1287 | ||
1288 | static void hpsa_scsi_interpret_error(struct CommandList *cp) | |
1289 | { | |
1290 | struct ErrorInfo *ei; | |
1291 | struct device *d = &cp->h->pdev->dev; | |
1292 | ||
1293 | ei = cp->err_info; | |
1294 | switch (ei->CommandStatus) { | |
1295 | case CMD_TARGET_STATUS: | |
1296 | dev_warn(d, "cmd %p has completed with errors\n", cp); | |
1297 | dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, | |
1298 | ei->ScsiStatus); | |
1299 | if (ei->ScsiStatus == 0) | |
1300 | dev_warn(d, "SCSI status is abnormally zero. " | |
1301 | "(probably indicates selection timeout " | |
1302 | "reported incorrectly due to a known " | |
1303 | "firmware bug, circa July, 2001.)\n"); | |
1304 | break; | |
1305 | case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ | |
1306 | dev_info(d, "UNDERRUN\n"); | |
1307 | break; | |
1308 | case CMD_DATA_OVERRUN: | |
1309 | dev_warn(d, "cp %p has completed with data overrun\n", cp); | |
1310 | break; | |
1311 | case CMD_INVALID: { | |
1312 | /* controller unfortunately reports SCSI passthru's | |
1313 | * to non-existent targets as invalid commands. | |
1314 | */ | |
1315 | dev_warn(d, "cp %p is reported invalid (probably means " | |
1316 | "target device no longer present)\n", cp); | |
1317 | /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); | |
1318 | print_cmd(cp); */ | |
1319 | } | |
1320 | break; | |
1321 | case CMD_PROTOCOL_ERR: | |
1322 | dev_warn(d, "cp %p has protocol error \n", cp); | |
1323 | break; | |
1324 | case CMD_HARDWARE_ERR: | |
1325 | /* cmd->result = DID_ERROR << 16; */ | |
1326 | dev_warn(d, "cp %p had hardware error\n", cp); | |
1327 | break; | |
1328 | case CMD_CONNECTION_LOST: | |
1329 | dev_warn(d, "cp %p had connection lost\n", cp); | |
1330 | break; | |
1331 | case CMD_ABORTED: | |
1332 | dev_warn(d, "cp %p was aborted\n", cp); | |
1333 | break; | |
1334 | case CMD_ABORT_FAILED: | |
1335 | dev_warn(d, "cp %p reports abort failed\n", cp); | |
1336 | break; | |
1337 | case CMD_UNSOLICITED_ABORT: | |
1338 | dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); | |
1339 | break; | |
1340 | case CMD_TIMEOUT: | |
1341 | dev_warn(d, "cp %p timed out\n", cp); | |
1342 | break; | |
1343 | default: | |
1344 | dev_warn(d, "cp %p returned unknown status %x\n", cp, | |
1345 | ei->CommandStatus); | |
1346 | } | |
1347 | } | |
1348 | ||
1349 | static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, | |
1350 | unsigned char page, unsigned char *buf, | |
1351 | unsigned char bufsize) | |
1352 | { | |
1353 | int rc = IO_OK; | |
1354 | struct CommandList *c; | |
1355 | struct ErrorInfo *ei; | |
1356 | ||
1357 | c = cmd_special_alloc(h); | |
1358 | ||
1359 | if (c == NULL) { /* trouble... */ | |
1360 | dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); | |
ecd9aad4 | 1361 | return -ENOMEM; |
edd16368 SC |
1362 | } |
1363 | ||
1364 | fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); | |
1365 | hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); | |
1366 | ei = c->err_info; | |
1367 | if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { | |
1368 | hpsa_scsi_interpret_error(c); | |
1369 | rc = -1; | |
1370 | } | |
1371 | cmd_special_free(h, c); | |
1372 | return rc; | |
1373 | } | |
1374 | ||
1375 | static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) | |
1376 | { | |
1377 | int rc = IO_OK; | |
1378 | struct CommandList *c; | |
1379 | struct ErrorInfo *ei; | |
1380 | ||
1381 | c = cmd_special_alloc(h); | |
1382 | ||
1383 | if (c == NULL) { /* trouble... */ | |
1384 | dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); | |
1385 | return -1; | |
1386 | } | |
1387 | ||
1388 | fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); | |
1389 | hpsa_scsi_do_simple_cmd_core(h, c); | |
1390 | /* no unmap needed here because no data xfer. */ | |
1391 | ||
1392 | ei = c->err_info; | |
1393 | if (ei->CommandStatus != 0) { | |
1394 | hpsa_scsi_interpret_error(c); | |
1395 | rc = -1; | |
1396 | } | |
1397 | cmd_special_free(h, c); | |
1398 | return rc; | |
1399 | } | |
1400 | ||
1401 | static void hpsa_get_raid_level(struct ctlr_info *h, | |
1402 | unsigned char *scsi3addr, unsigned char *raid_level) | |
1403 | { | |
1404 | int rc; | |
1405 | unsigned char *buf; | |
1406 | ||
1407 | *raid_level = RAID_UNKNOWN; | |
1408 | buf = kzalloc(64, GFP_KERNEL); | |
1409 | if (!buf) | |
1410 | return; | |
1411 | rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); | |
1412 | if (rc == 0) | |
1413 | *raid_level = buf[8]; | |
1414 | if (*raid_level > RAID_UNKNOWN) | |
1415 | *raid_level = RAID_UNKNOWN; | |
1416 | kfree(buf); | |
1417 | return; | |
1418 | } | |
1419 | ||
1420 | /* Get the device id from inquiry page 0x83 */ | |
1421 | static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, | |
1422 | unsigned char *device_id, int buflen) | |
1423 | { | |
1424 | int rc; | |
1425 | unsigned char *buf; | |
1426 | ||
1427 | if (buflen > 16) | |
1428 | buflen = 16; | |
1429 | buf = kzalloc(64, GFP_KERNEL); | |
1430 | if (!buf) | |
1431 | return -1; | |
1432 | rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); | |
1433 | if (rc == 0) | |
1434 | memcpy(device_id, &buf[8], buflen); | |
1435 | kfree(buf); | |
1436 | return rc != 0; | |
1437 | } | |
1438 | ||
1439 | static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, | |
1440 | struct ReportLUNdata *buf, int bufsize, | |
1441 | int extended_response) | |
1442 | { | |
1443 | int rc = IO_OK; | |
1444 | struct CommandList *c; | |
1445 | unsigned char scsi3addr[8]; | |
1446 | struct ErrorInfo *ei; | |
1447 | ||
1448 | c = cmd_special_alloc(h); | |
1449 | if (c == NULL) { /* trouble... */ | |
1450 | dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); | |
1451 | return -1; | |
1452 | } | |
e89c0ae7 SC |
1453 | /* address the controller */ |
1454 | memset(scsi3addr, 0, sizeof(scsi3addr)); | |
edd16368 SC |
1455 | fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, |
1456 | buf, bufsize, 0, scsi3addr, TYPE_CMD); | |
1457 | if (extended_response) | |
1458 | c->Request.CDB[1] = extended_response; | |
1459 | hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); | |
1460 | ei = c->err_info; | |
1461 | if (ei->CommandStatus != 0 && | |
1462 | ei->CommandStatus != CMD_DATA_UNDERRUN) { | |
1463 | hpsa_scsi_interpret_error(c); | |
1464 | rc = -1; | |
1465 | } | |
1466 | cmd_special_free(h, c); | |
1467 | return rc; | |
1468 | } | |
1469 | ||
1470 | static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, | |
1471 | struct ReportLUNdata *buf, | |
1472 | int bufsize, int extended_response) | |
1473 | { | |
1474 | return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); | |
1475 | } | |
1476 | ||
1477 | static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, | |
1478 | struct ReportLUNdata *buf, int bufsize) | |
1479 | { | |
1480 | return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); | |
1481 | } | |
1482 | ||
1483 | static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, | |
1484 | int bus, int target, int lun) | |
1485 | { | |
1486 | device->bus = bus; | |
1487 | device->target = target; | |
1488 | device->lun = lun; | |
1489 | } | |
1490 | ||
1491 | static int hpsa_update_device_info(struct ctlr_info *h, | |
1492 | unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) | |
1493 | { | |
1494 | #define OBDR_TAPE_INQ_SIZE 49 | |
ea6d3bc3 | 1495 | unsigned char *inq_buff; |
edd16368 | 1496 | |
ea6d3bc3 | 1497 | inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); |
edd16368 SC |
1498 | if (!inq_buff) |
1499 | goto bail_out; | |
1500 | ||
edd16368 SC |
1501 | /* Do an inquiry to the device to see what it is. */ |
1502 | if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, | |
1503 | (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { | |
1504 | /* Inquiry failed (msg printed already) */ | |
1505 | dev_err(&h->pdev->dev, | |
1506 | "hpsa_update_device_info: inquiry failed\n"); | |
1507 | goto bail_out; | |
1508 | } | |
1509 | ||
1510 | /* As a side effect, record the firmware version number | |
1511 | * if we happen to be talking to the RAID controller. | |
1512 | */ | |
1513 | if (is_hba_lunid(scsi3addr)) | |
1514 | memcpy(h->firm_ver, &inq_buff[32], 4); | |
1515 | ||
1516 | this_device->devtype = (inq_buff[0] & 0x1f); | |
1517 | memcpy(this_device->scsi3addr, scsi3addr, 8); | |
1518 | memcpy(this_device->vendor, &inq_buff[8], | |
1519 | sizeof(this_device->vendor)); | |
1520 | memcpy(this_device->model, &inq_buff[16], | |
1521 | sizeof(this_device->model)); | |
1522 | memcpy(this_device->revision, &inq_buff[32], | |
1523 | sizeof(this_device->revision)); | |
1524 | memset(this_device->device_id, 0, | |
1525 | sizeof(this_device->device_id)); | |
1526 | hpsa_get_device_id(h, scsi3addr, this_device->device_id, | |
1527 | sizeof(this_device->device_id)); | |
1528 | ||
1529 | if (this_device->devtype == TYPE_DISK && | |
1530 | is_logical_dev_addr_mode(scsi3addr)) | |
1531 | hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); | |
1532 | else | |
1533 | this_device->raid_level = RAID_UNKNOWN; | |
1534 | ||
1535 | kfree(inq_buff); | |
1536 | return 0; | |
1537 | ||
1538 | bail_out: | |
1539 | kfree(inq_buff); | |
1540 | return 1; | |
1541 | } | |
1542 | ||
1543 | static unsigned char *msa2xxx_model[] = { | |
1544 | "MSA2012", | |
1545 | "MSA2024", | |
1546 | "MSA2312", | |
1547 | "MSA2324", | |
1548 | NULL, | |
1549 | }; | |
1550 | ||
1551 | static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) | |
1552 | { | |
1553 | int i; | |
1554 | ||
1555 | for (i = 0; msa2xxx_model[i]; i++) | |
1556 | if (strncmp(device->model, msa2xxx_model[i], | |
1557 | strlen(msa2xxx_model[i])) == 0) | |
1558 | return 1; | |
1559 | return 0; | |
1560 | } | |
1561 | ||
1562 | /* Helper function to assign bus, target, lun mapping of devices. | |
1563 | * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical | |
1564 | * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. | |
1565 | * Logical drive target and lun are assigned at this time, but | |
1566 | * physical device lun and target assignment are deferred (assigned | |
1567 | * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) | |
1568 | */ | |
1569 | static void figure_bus_target_lun(struct ctlr_info *h, | |
01a02ffc | 1570 | u8 *lunaddrbytes, int *bus, int *target, int *lun, |
edd16368 SC |
1571 | struct hpsa_scsi_dev_t *device) |
1572 | { | |
01a02ffc | 1573 | u32 lunid; |
edd16368 SC |
1574 | |
1575 | if (is_logical_dev_addr_mode(lunaddrbytes)) { | |
1576 | /* logical device */ | |
339b2b14 SC |
1577 | if (unlikely(is_scsi_rev_5(h))) { |
1578 | /* p1210m, logical drives lun assignments | |
1579 | * match SCSI REPORT LUNS data. | |
1580 | */ | |
1581 | lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); | |
edd16368 | 1582 | *bus = 0; |
339b2b14 SC |
1583 | *target = 0; |
1584 | *lun = (lunid & 0x3fff) + 1; | |
1585 | } else { | |
1586 | /* not p1210m... */ | |
1587 | lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); | |
1588 | if (is_msa2xxx(h, device)) { | |
1589 | /* msa2xxx way, put logicals on bus 1 | |
1590 | * and match target/lun numbers box | |
1591 | * reports. | |
1592 | */ | |
1593 | *bus = 1; | |
1594 | *target = (lunid >> 16) & 0x3fff; | |
1595 | *lun = lunid & 0x00ff; | |
1596 | } else { | |
1597 | /* Traditional smart array way. */ | |
1598 | *bus = 0; | |
1599 | *lun = 0; | |
1600 | *target = lunid & 0x3fff; | |
1601 | } | |
edd16368 SC |
1602 | } |
1603 | } else { | |
1604 | /* physical device */ | |
1605 | if (is_hba_lunid(lunaddrbytes)) | |
339b2b14 SC |
1606 | if (unlikely(is_scsi_rev_5(h))) { |
1607 | *bus = 0; /* put p1210m ctlr at 0,0,0 */ | |
1608 | *target = 0; | |
1609 | *lun = 0; | |
1610 | return; | |
1611 | } else | |
1612 | *bus = 3; /* traditional smartarray */ | |
edd16368 | 1613 | else |
339b2b14 | 1614 | *bus = 2; /* physical disk */ |
edd16368 SC |
1615 | *target = -1; |
1616 | *lun = -1; /* we will fill these in later. */ | |
1617 | } | |
1618 | } | |
1619 | ||
1620 | /* | |
1621 | * If there is no lun 0 on a target, linux won't find any devices. | |
1622 | * For the MSA2xxx boxes, we have to manually detect the enclosure | |
1623 | * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report | |
1624 | * it for some reason. *tmpdevice is the target we're adding, | |
1625 | * this_device is a pointer into the current element of currentsd[] | |
1626 | * that we're building up in update_scsi_devices(), below. | |
1627 | * lunzerobits is a bitmap that tracks which targets already have a | |
1628 | * lun 0 assigned. | |
1629 | * Returns 1 if an enclosure was added, 0 if not. | |
1630 | */ | |
1631 | static int add_msa2xxx_enclosure_device(struct ctlr_info *h, | |
1632 | struct hpsa_scsi_dev_t *tmpdevice, | |
01a02ffc | 1633 | struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes, |
edd16368 SC |
1634 | int bus, int target, int lun, unsigned long lunzerobits[], |
1635 | int *nmsa2xxx_enclosures) | |
1636 | { | |
1637 | unsigned char scsi3addr[8]; | |
1638 | ||
1639 | if (test_bit(target, lunzerobits)) | |
1640 | return 0; /* There is already a lun 0 on this target. */ | |
1641 | ||
1642 | if (!is_logical_dev_addr_mode(lunaddrbytes)) | |
1643 | return 0; /* It's the logical targets that may lack lun 0. */ | |
1644 | ||
1645 | if (!is_msa2xxx(h, tmpdevice)) | |
1646 | return 0; /* It's only the MSA2xxx that have this problem. */ | |
1647 | ||
1648 | if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ | |
1649 | return 0; | |
1650 | ||
1651 | if (is_hba_lunid(scsi3addr)) | |
1652 | return 0; /* Don't add the RAID controller here. */ | |
1653 | ||
339b2b14 SC |
1654 | if (is_scsi_rev_5(h)) |
1655 | return 0; /* p1210m doesn't need to do this. */ | |
1656 | ||
edd16368 SC |
1657 | #define MAX_MSA2XXX_ENCLOSURES 32 |
1658 | if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { | |
1659 | dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " | |
1660 | "enclosures exceeded. Check your hardware " | |
1661 | "configuration."); | |
1662 | return 0; | |
1663 | } | |
1664 | ||
1665 | memset(scsi3addr, 0, 8); | |
1666 | scsi3addr[3] = target; | |
1667 | if (hpsa_update_device_info(h, scsi3addr, this_device)) | |
1668 | return 0; | |
1669 | (*nmsa2xxx_enclosures)++; | |
1670 | hpsa_set_bus_target_lun(this_device, bus, target, 0); | |
1671 | set_bit(target, lunzerobits); | |
1672 | return 1; | |
1673 | } | |
1674 | ||
1675 | /* | |
1676 | * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, | |
1677 | * logdev. The number of luns in physdev and logdev are returned in | |
1678 | * *nphysicals and *nlogicals, respectively. | |
1679 | * Returns 0 on success, -1 otherwise. | |
1680 | */ | |
1681 | static int hpsa_gather_lun_info(struct ctlr_info *h, | |
1682 | int reportlunsize, | |
01a02ffc SC |
1683 | struct ReportLUNdata *physdev, u32 *nphysicals, |
1684 | struct ReportLUNdata *logdev, u32 *nlogicals) | |
edd16368 SC |
1685 | { |
1686 | if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { | |
1687 | dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); | |
1688 | return -1; | |
1689 | } | |
6df1e954 | 1690 | *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 8; |
edd16368 SC |
1691 | if (*nphysicals > HPSA_MAX_PHYS_LUN) { |
1692 | dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." | |
1693 | " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, | |
1694 | *nphysicals - HPSA_MAX_PHYS_LUN); | |
1695 | *nphysicals = HPSA_MAX_PHYS_LUN; | |
1696 | } | |
1697 | if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { | |
1698 | dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); | |
1699 | return -1; | |
1700 | } | |
6df1e954 | 1701 | *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8; |
edd16368 SC |
1702 | /* Reject Logicals in excess of our max capability. */ |
1703 | if (*nlogicals > HPSA_MAX_LUN) { | |
1704 | dev_warn(&h->pdev->dev, | |
1705 | "maximum logical LUNs (%d) exceeded. " | |
1706 | "%d LUNs ignored.\n", HPSA_MAX_LUN, | |
1707 | *nlogicals - HPSA_MAX_LUN); | |
1708 | *nlogicals = HPSA_MAX_LUN; | |
1709 | } | |
1710 | if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { | |
1711 | dev_warn(&h->pdev->dev, | |
1712 | "maximum logical + physical LUNs (%d) exceeded. " | |
1713 | "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, | |
1714 | *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); | |
1715 | *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; | |
1716 | } | |
1717 | return 0; | |
1718 | } | |
1719 | ||
339b2b14 SC |
1720 | u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i, |
1721 | int nphysicals, int nlogicals, struct ReportLUNdata *physdev_list, | |
1722 | struct ReportLUNdata *logdev_list) | |
1723 | { | |
1724 | /* Helper function, figure out where the LUN ID info is coming from | |
1725 | * given index i, lists of physical and logical devices, where in | |
1726 | * the list the raid controller is supposed to appear (first or last) | |
1727 | */ | |
1728 | ||
1729 | int logicals_start = nphysicals + (raid_ctlr_position == 0); | |
1730 | int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0); | |
1731 | ||
1732 | if (i == raid_ctlr_position) | |
1733 | return RAID_CTLR_LUNID; | |
1734 | ||
1735 | if (i < logicals_start) | |
1736 | return &physdev_list->LUN[i - (raid_ctlr_position == 0)][0]; | |
1737 | ||
1738 | if (i < last_device) | |
1739 | return &logdev_list->LUN[i - nphysicals - | |
1740 | (raid_ctlr_position == 0)][0]; | |
1741 | BUG(); | |
1742 | return NULL; | |
1743 | } | |
1744 | ||
edd16368 SC |
1745 | static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) |
1746 | { | |
1747 | /* the idea here is we could get notified | |
1748 | * that some devices have changed, so we do a report | |
1749 | * physical luns and report logical luns cmd, and adjust | |
1750 | * our list of devices accordingly. | |
1751 | * | |
1752 | * The scsi3addr's of devices won't change so long as the | |
1753 | * adapter is not reset. That means we can rescan and | |
1754 | * tell which devices we already know about, vs. new | |
1755 | * devices, vs. disappearing devices. | |
1756 | */ | |
1757 | struct ReportLUNdata *physdev_list = NULL; | |
1758 | struct ReportLUNdata *logdev_list = NULL; | |
1759 | unsigned char *inq_buff = NULL; | |
01a02ffc SC |
1760 | u32 nphysicals = 0; |
1761 | u32 nlogicals = 0; | |
1762 | u32 ndev_allocated = 0; | |
edd16368 SC |
1763 | struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; |
1764 | int ncurrent = 0; | |
1765 | int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; | |
1766 | int i, nmsa2xxx_enclosures, ndevs_to_allocate; | |
1767 | int bus, target, lun; | |
339b2b14 | 1768 | int raid_ctlr_position; |
edd16368 SC |
1769 | DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); |
1770 | ||
1771 | currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, | |
1772 | GFP_KERNEL); | |
1773 | physdev_list = kzalloc(reportlunsize, GFP_KERNEL); | |
1774 | logdev_list = kzalloc(reportlunsize, GFP_KERNEL); | |
1775 | inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); | |
1776 | tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); | |
1777 | ||
1778 | if (!currentsd || !physdev_list || !logdev_list || | |
1779 | !inq_buff || !tmpdevice) { | |
1780 | dev_err(&h->pdev->dev, "out of memory\n"); | |
1781 | goto out; | |
1782 | } | |
1783 | memset(lunzerobits, 0, sizeof(lunzerobits)); | |
1784 | ||
1785 | if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, | |
1786 | logdev_list, &nlogicals)) | |
1787 | goto out; | |
1788 | ||
1789 | /* We might see up to 32 MSA2xxx enclosures, actually 8 of them | |
1790 | * but each of them 4 times through different paths. The plus 1 | |
1791 | * is for the RAID controller. | |
1792 | */ | |
1793 | ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; | |
1794 | ||
1795 | /* Allocate the per device structures */ | |
1796 | for (i = 0; i < ndevs_to_allocate; i++) { | |
1797 | currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); | |
1798 | if (!currentsd[i]) { | |
1799 | dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", | |
1800 | __FILE__, __LINE__); | |
1801 | goto out; | |
1802 | } | |
1803 | ndev_allocated++; | |
1804 | } | |
1805 | ||
339b2b14 SC |
1806 | if (unlikely(is_scsi_rev_5(h))) |
1807 | raid_ctlr_position = 0; | |
1808 | else | |
1809 | raid_ctlr_position = nphysicals + nlogicals; | |
1810 | ||
edd16368 SC |
1811 | /* adjust our table of devices */ |
1812 | nmsa2xxx_enclosures = 0; | |
1813 | for (i = 0; i < nphysicals + nlogicals + 1; i++) { | |
01a02ffc | 1814 | u8 *lunaddrbytes; |
edd16368 SC |
1815 | |
1816 | /* Figure out where the LUN ID info is coming from */ | |
339b2b14 SC |
1817 | lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, |
1818 | i, nphysicals, nlogicals, physdev_list, logdev_list); | |
edd16368 | 1819 | /* skip masked physical devices. */ |
339b2b14 SC |
1820 | if (lunaddrbytes[3] & 0xC0 && |
1821 | i < nphysicals + (raid_ctlr_position == 0)) | |
edd16368 SC |
1822 | continue; |
1823 | ||
1824 | /* Get device type, vendor, model, device id */ | |
1825 | if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) | |
1826 | continue; /* skip it if we can't talk to it. */ | |
1827 | figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, | |
1828 | tmpdevice); | |
1829 | this_device = currentsd[ncurrent]; | |
1830 | ||
1831 | /* | |
1832 | * For the msa2xxx boxes, we have to insert a LUN 0 which | |
1833 | * doesn't show up in CCISS_REPORT_PHYSICAL data, but there | |
1834 | * is nonetheless an enclosure device there. We have to | |
1835 | * present that otherwise linux won't find anything if | |
1836 | * there is no lun 0. | |
1837 | */ | |
1838 | if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, | |
1839 | lunaddrbytes, bus, target, lun, lunzerobits, | |
1840 | &nmsa2xxx_enclosures)) { | |
1841 | ncurrent++; | |
1842 | this_device = currentsd[ncurrent]; | |
1843 | } | |
1844 | ||
1845 | *this_device = *tmpdevice; | |
1846 | hpsa_set_bus_target_lun(this_device, bus, target, lun); | |
1847 | ||
1848 | switch (this_device->devtype) { | |
1849 | case TYPE_ROM: { | |
1850 | /* We don't *really* support actual CD-ROM devices, | |
1851 | * just "One Button Disaster Recovery" tape drive | |
1852 | * which temporarily pretends to be a CD-ROM drive. | |
1853 | * So we check that the device is really an OBDR tape | |
1854 | * device by checking for "$DR-10" in bytes 43-48 of | |
1855 | * the inquiry data. | |
1856 | */ | |
1857 | char obdr_sig[7]; | |
1858 | #define OBDR_TAPE_SIG "$DR-10" | |
1859 | strncpy(obdr_sig, &inq_buff[43], 6); | |
1860 | obdr_sig[6] = '\0'; | |
1861 | if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) | |
1862 | /* Not OBDR device, ignore it. */ | |
1863 | break; | |
1864 | } | |
1865 | ncurrent++; | |
1866 | break; | |
1867 | case TYPE_DISK: | |
1868 | if (i < nphysicals) | |
1869 | break; | |
1870 | ncurrent++; | |
1871 | break; | |
1872 | case TYPE_TAPE: | |
1873 | case TYPE_MEDIUM_CHANGER: | |
1874 | ncurrent++; | |
1875 | break; | |
1876 | case TYPE_RAID: | |
1877 | /* Only present the Smartarray HBA as a RAID controller. | |
1878 | * If it's a RAID controller other than the HBA itself | |
1879 | * (an external RAID controller, MSA500 or similar) | |
1880 | * don't present it. | |
1881 | */ | |
1882 | if (!is_hba_lunid(lunaddrbytes)) | |
1883 | break; | |
1884 | ncurrent++; | |
1885 | break; | |
1886 | default: | |
1887 | break; | |
1888 | } | |
1889 | if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) | |
1890 | break; | |
1891 | } | |
1892 | adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); | |
1893 | out: | |
1894 | kfree(tmpdevice); | |
1895 | for (i = 0; i < ndev_allocated; i++) | |
1896 | kfree(currentsd[i]); | |
1897 | kfree(currentsd); | |
1898 | kfree(inq_buff); | |
1899 | kfree(physdev_list); | |
1900 | kfree(logdev_list); | |
edd16368 SC |
1901 | } |
1902 | ||
1903 | /* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci | |
1904 | * dma mapping and fills in the scatter gather entries of the | |
1905 | * hpsa command, cp. | |
1906 | */ | |
1907 | static int hpsa_scatter_gather(struct pci_dev *pdev, | |
1908 | struct CommandList *cp, | |
1909 | struct scsi_cmnd *cmd) | |
1910 | { | |
1911 | unsigned int len; | |
1912 | struct scatterlist *sg; | |
01a02ffc | 1913 | u64 addr64; |
edd16368 SC |
1914 | int use_sg, i; |
1915 | ||
1916 | BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); | |
1917 | ||
1918 | use_sg = scsi_dma_map(cmd); | |
1919 | if (use_sg < 0) | |
1920 | return use_sg; | |
1921 | ||
1922 | if (!use_sg) | |
1923 | goto sglist_finished; | |
1924 | ||
1925 | scsi_for_each_sg(cmd, sg, use_sg, i) { | |
01a02ffc | 1926 | addr64 = (u64) sg_dma_address(sg); |
edd16368 SC |
1927 | len = sg_dma_len(sg); |
1928 | cp->SG[i].Addr.lower = | |
01a02ffc | 1929 | (u32) (addr64 & (u64) 0x00000000FFFFFFFF); |
edd16368 | 1930 | cp->SG[i].Addr.upper = |
01a02ffc | 1931 | (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF); |
edd16368 SC |
1932 | cp->SG[i].Len = len; |
1933 | cp->SG[i].Ext = 0; /* we are not chaining */ | |
1934 | } | |
1935 | ||
1936 | sglist_finished: | |
1937 | ||
01a02ffc SC |
1938 | cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */ |
1939 | cp->Header.SGTotal = (u16) use_sg; /* total sgs in this cmd list */ | |
edd16368 SC |
1940 | return 0; |
1941 | } | |
1942 | ||
1943 | ||
1944 | static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, | |
1945 | void (*done)(struct scsi_cmnd *)) | |
1946 | { | |
1947 | struct ctlr_info *h; | |
1948 | struct hpsa_scsi_dev_t *dev; | |
1949 | unsigned char scsi3addr[8]; | |
1950 | struct CommandList *c; | |
1951 | unsigned long flags; | |
1952 | ||
1953 | /* Get the ptr to our adapter structure out of cmd->host. */ | |
1954 | h = sdev_to_hba(cmd->device); | |
1955 | dev = cmd->device->hostdata; | |
1956 | if (!dev) { | |
1957 | cmd->result = DID_NO_CONNECT << 16; | |
1958 | done(cmd); | |
1959 | return 0; | |
1960 | } | |
1961 | memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); | |
1962 | ||
1963 | /* Need a lock as this is being allocated from the pool */ | |
1964 | spin_lock_irqsave(&h->lock, flags); | |
1965 | c = cmd_alloc(h); | |
1966 | spin_unlock_irqrestore(&h->lock, flags); | |
1967 | if (c == NULL) { /* trouble... */ | |
1968 | dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); | |
1969 | return SCSI_MLQUEUE_HOST_BUSY; | |
1970 | } | |
1971 | ||
1972 | /* Fill in the command list header */ | |
1973 | ||
1974 | cmd->scsi_done = done; /* save this for use by completion code */ | |
1975 | ||
1976 | /* save c in case we have to abort it */ | |
1977 | cmd->host_scribble = (unsigned char *) c; | |
1978 | ||
1979 | c->cmd_type = CMD_SCSI; | |
1980 | c->scsi_cmd = cmd; | |
1981 | c->Header.ReplyQueue = 0; /* unused in simple mode */ | |
1982 | memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); | |
303932fd DB |
1983 | c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT); |
1984 | c->Header.Tag.lower |= DIRECT_LOOKUP_BIT; | |
edd16368 SC |
1985 | |
1986 | /* Fill in the request block... */ | |
1987 | ||
1988 | c->Request.Timeout = 0; | |
1989 | memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); | |
1990 | BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); | |
1991 | c->Request.CDBLen = cmd->cmd_len; | |
1992 | memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); | |
1993 | c->Request.Type.Type = TYPE_CMD; | |
1994 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
1995 | switch (cmd->sc_data_direction) { | |
1996 | case DMA_TO_DEVICE: | |
1997 | c->Request.Type.Direction = XFER_WRITE; | |
1998 | break; | |
1999 | case DMA_FROM_DEVICE: | |
2000 | c->Request.Type.Direction = XFER_READ; | |
2001 | break; | |
2002 | case DMA_NONE: | |
2003 | c->Request.Type.Direction = XFER_NONE; | |
2004 | break; | |
2005 | case DMA_BIDIRECTIONAL: | |
2006 | /* This can happen if a buggy application does a scsi passthru | |
2007 | * and sets both inlen and outlen to non-zero. ( see | |
2008 | * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) | |
2009 | */ | |
2010 | ||
2011 | c->Request.Type.Direction = XFER_RSVD; | |
2012 | /* This is technically wrong, and hpsa controllers should | |
2013 | * reject it with CMD_INVALID, which is the most correct | |
2014 | * response, but non-fibre backends appear to let it | |
2015 | * slide by, and give the same results as if this field | |
2016 | * were set correctly. Either way is acceptable for | |
2017 | * our purposes here. | |
2018 | */ | |
2019 | ||
2020 | break; | |
2021 | ||
2022 | default: | |
2023 | dev_err(&h->pdev->dev, "unknown data direction: %d\n", | |
2024 | cmd->sc_data_direction); | |
2025 | BUG(); | |
2026 | break; | |
2027 | } | |
2028 | ||
2029 | if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */ | |
2030 | cmd_free(h, c); | |
2031 | return SCSI_MLQUEUE_HOST_BUSY; | |
2032 | } | |
2033 | enqueue_cmd_and_start_io(h, c); | |
2034 | /* the cmd'll come back via intr handler in complete_scsi_command() */ | |
2035 | return 0; | |
2036 | } | |
2037 | ||
a08a8471 SC |
2038 | static void hpsa_scan_start(struct Scsi_Host *sh) |
2039 | { | |
2040 | struct ctlr_info *h = shost_to_hba(sh); | |
2041 | unsigned long flags; | |
2042 | ||
2043 | /* wait until any scan already in progress is finished. */ | |
2044 | while (1) { | |
2045 | spin_lock_irqsave(&h->scan_lock, flags); | |
2046 | if (h->scan_finished) | |
2047 | break; | |
2048 | spin_unlock_irqrestore(&h->scan_lock, flags); | |
2049 | wait_event(h->scan_wait_queue, h->scan_finished); | |
2050 | /* Note: We don't need to worry about a race between this | |
2051 | * thread and driver unload because the midlayer will | |
2052 | * have incremented the reference count, so unload won't | |
2053 | * happen if we're in here. | |
2054 | */ | |
2055 | } | |
2056 | h->scan_finished = 0; /* mark scan as in progress */ | |
2057 | spin_unlock_irqrestore(&h->scan_lock, flags); | |
2058 | ||
2059 | hpsa_update_scsi_devices(h, h->scsi_host->host_no); | |
2060 | ||
2061 | spin_lock_irqsave(&h->scan_lock, flags); | |
2062 | h->scan_finished = 1; /* mark scan as finished. */ | |
2063 | wake_up_all(&h->scan_wait_queue); | |
2064 | spin_unlock_irqrestore(&h->scan_lock, flags); | |
2065 | } | |
2066 | ||
2067 | static int hpsa_scan_finished(struct Scsi_Host *sh, | |
2068 | unsigned long elapsed_time) | |
2069 | { | |
2070 | struct ctlr_info *h = shost_to_hba(sh); | |
2071 | unsigned long flags; | |
2072 | int finished; | |
2073 | ||
2074 | spin_lock_irqsave(&h->scan_lock, flags); | |
2075 | finished = h->scan_finished; | |
2076 | spin_unlock_irqrestore(&h->scan_lock, flags); | |
2077 | return finished; | |
2078 | } | |
2079 | ||
edd16368 SC |
2080 | static void hpsa_unregister_scsi(struct ctlr_info *h) |
2081 | { | |
2082 | /* we are being forcibly unloaded, and may not refuse. */ | |
2083 | scsi_remove_host(h->scsi_host); | |
2084 | scsi_host_put(h->scsi_host); | |
2085 | h->scsi_host = NULL; | |
2086 | } | |
2087 | ||
2088 | static int hpsa_register_scsi(struct ctlr_info *h) | |
2089 | { | |
2090 | int rc; | |
2091 | ||
edd16368 SC |
2092 | rc = hpsa_scsi_detect(h); |
2093 | if (rc != 0) | |
2094 | dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" | |
2095 | " hpsa_scsi_detect(), rc is %d\n", rc); | |
2096 | return rc; | |
2097 | } | |
2098 | ||
2099 | static int wait_for_device_to_become_ready(struct ctlr_info *h, | |
2100 | unsigned char lunaddr[]) | |
2101 | { | |
2102 | int rc = 0; | |
2103 | int count = 0; | |
2104 | int waittime = 1; /* seconds */ | |
2105 | struct CommandList *c; | |
2106 | ||
2107 | c = cmd_special_alloc(h); | |
2108 | if (!c) { | |
2109 | dev_warn(&h->pdev->dev, "out of memory in " | |
2110 | "wait_for_device_to_become_ready.\n"); | |
2111 | return IO_ERROR; | |
2112 | } | |
2113 | ||
2114 | /* Send test unit ready until device ready, or give up. */ | |
2115 | while (count < HPSA_TUR_RETRY_LIMIT) { | |
2116 | ||
2117 | /* Wait for a bit. do this first, because if we send | |
2118 | * the TUR right away, the reset will just abort it. | |
2119 | */ | |
2120 | msleep(1000 * waittime); | |
2121 | count++; | |
2122 | ||
2123 | /* Increase wait time with each try, up to a point. */ | |
2124 | if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) | |
2125 | waittime = waittime * 2; | |
2126 | ||
2127 | /* Send the Test Unit Ready */ | |
2128 | fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); | |
2129 | hpsa_scsi_do_simple_cmd_core(h, c); | |
2130 | /* no unmap needed here because no data xfer. */ | |
2131 | ||
2132 | if (c->err_info->CommandStatus == CMD_SUCCESS) | |
2133 | break; | |
2134 | ||
2135 | if (c->err_info->CommandStatus == CMD_TARGET_STATUS && | |
2136 | c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && | |
2137 | (c->err_info->SenseInfo[2] == NO_SENSE || | |
2138 | c->err_info->SenseInfo[2] == UNIT_ATTENTION)) | |
2139 | break; | |
2140 | ||
2141 | dev_warn(&h->pdev->dev, "waiting %d secs " | |
2142 | "for device to become ready.\n", waittime); | |
2143 | rc = 1; /* device not ready. */ | |
2144 | } | |
2145 | ||
2146 | if (rc) | |
2147 | dev_warn(&h->pdev->dev, "giving up on device.\n"); | |
2148 | else | |
2149 | dev_warn(&h->pdev->dev, "device is ready.\n"); | |
2150 | ||
2151 | cmd_special_free(h, c); | |
2152 | return rc; | |
2153 | } | |
2154 | ||
2155 | /* Need at least one of these error handlers to keep ../scsi/hosts.c from | |
2156 | * complaining. Doing a host- or bus-reset can't do anything good here. | |
2157 | */ | |
2158 | static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) | |
2159 | { | |
2160 | int rc; | |
2161 | struct ctlr_info *h; | |
2162 | struct hpsa_scsi_dev_t *dev; | |
2163 | ||
2164 | /* find the controller to which the command to be aborted was sent */ | |
2165 | h = sdev_to_hba(scsicmd->device); | |
2166 | if (h == NULL) /* paranoia */ | |
2167 | return FAILED; | |
edd16368 SC |
2168 | dev = scsicmd->device->hostdata; |
2169 | if (!dev) { | |
2170 | dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " | |
2171 | "device lookup failed.\n"); | |
2172 | return FAILED; | |
2173 | } | |
d416b0c7 SC |
2174 | dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n", |
2175 | h->scsi_host->host_no, dev->bus, dev->target, dev->lun); | |
edd16368 SC |
2176 | /* send a reset to the SCSI LUN which the command was sent to */ |
2177 | rc = hpsa_send_reset(h, dev->scsi3addr); | |
2178 | if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) | |
2179 | return SUCCESS; | |
2180 | ||
2181 | dev_warn(&h->pdev->dev, "resetting device failed.\n"); | |
2182 | return FAILED; | |
2183 | } | |
2184 | ||
2185 | /* | |
2186 | * For operations that cannot sleep, a command block is allocated at init, | |
2187 | * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track | |
2188 | * which ones are free or in use. Lock must be held when calling this. | |
2189 | * cmd_free() is the complement. | |
2190 | */ | |
2191 | static struct CommandList *cmd_alloc(struct ctlr_info *h) | |
2192 | { | |
2193 | struct CommandList *c; | |
2194 | int i; | |
2195 | union u64bit temp64; | |
2196 | dma_addr_t cmd_dma_handle, err_dma_handle; | |
2197 | ||
2198 | do { | |
2199 | i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); | |
2200 | if (i == h->nr_cmds) | |
2201 | return NULL; | |
2202 | } while (test_and_set_bit | |
2203 | (i & (BITS_PER_LONG - 1), | |
2204 | h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); | |
2205 | c = h->cmd_pool + i; | |
2206 | memset(c, 0, sizeof(*c)); | |
2207 | cmd_dma_handle = h->cmd_pool_dhandle | |
2208 | + i * sizeof(*c); | |
2209 | c->err_info = h->errinfo_pool + i; | |
2210 | memset(c->err_info, 0, sizeof(*c->err_info)); | |
2211 | err_dma_handle = h->errinfo_pool_dhandle | |
2212 | + i * sizeof(*c->err_info); | |
2213 | h->nr_allocs++; | |
2214 | ||
2215 | c->cmdindex = i; | |
2216 | ||
2217 | INIT_HLIST_NODE(&c->list); | |
01a02ffc SC |
2218 | c->busaddr = (u32) cmd_dma_handle; |
2219 | temp64.val = (u64) err_dma_handle; | |
edd16368 SC |
2220 | c->ErrDesc.Addr.lower = temp64.val32.lower; |
2221 | c->ErrDesc.Addr.upper = temp64.val32.upper; | |
2222 | c->ErrDesc.Len = sizeof(*c->err_info); | |
2223 | ||
2224 | c->h = h; | |
2225 | return c; | |
2226 | } | |
2227 | ||
2228 | /* For operations that can wait for kmalloc to possibly sleep, | |
2229 | * this routine can be called. Lock need not be held to call | |
2230 | * cmd_special_alloc. cmd_special_free() is the complement. | |
2231 | */ | |
2232 | static struct CommandList *cmd_special_alloc(struct ctlr_info *h) | |
2233 | { | |
2234 | struct CommandList *c; | |
2235 | union u64bit temp64; | |
2236 | dma_addr_t cmd_dma_handle, err_dma_handle; | |
2237 | ||
2238 | c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); | |
2239 | if (c == NULL) | |
2240 | return NULL; | |
2241 | memset(c, 0, sizeof(*c)); | |
2242 | ||
2243 | c->cmdindex = -1; | |
2244 | ||
2245 | c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), | |
2246 | &err_dma_handle); | |
2247 | ||
2248 | if (c->err_info == NULL) { | |
2249 | pci_free_consistent(h->pdev, | |
2250 | sizeof(*c), c, cmd_dma_handle); | |
2251 | return NULL; | |
2252 | } | |
2253 | memset(c->err_info, 0, sizeof(*c->err_info)); | |
2254 | ||
2255 | INIT_HLIST_NODE(&c->list); | |
01a02ffc SC |
2256 | c->busaddr = (u32) cmd_dma_handle; |
2257 | temp64.val = (u64) err_dma_handle; | |
edd16368 SC |
2258 | c->ErrDesc.Addr.lower = temp64.val32.lower; |
2259 | c->ErrDesc.Addr.upper = temp64.val32.upper; | |
2260 | c->ErrDesc.Len = sizeof(*c->err_info); | |
2261 | ||
2262 | c->h = h; | |
2263 | return c; | |
2264 | } | |
2265 | ||
2266 | static void cmd_free(struct ctlr_info *h, struct CommandList *c) | |
2267 | { | |
2268 | int i; | |
2269 | ||
2270 | i = c - h->cmd_pool; | |
2271 | clear_bit(i & (BITS_PER_LONG - 1), | |
2272 | h->cmd_pool_bits + (i / BITS_PER_LONG)); | |
2273 | h->nr_frees++; | |
2274 | } | |
2275 | ||
2276 | static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) | |
2277 | { | |
2278 | union u64bit temp64; | |
2279 | ||
2280 | temp64.val32.lower = c->ErrDesc.Addr.lower; | |
2281 | temp64.val32.upper = c->ErrDesc.Addr.upper; | |
2282 | pci_free_consistent(h->pdev, sizeof(*c->err_info), | |
2283 | c->err_info, (dma_addr_t) temp64.val); | |
2284 | pci_free_consistent(h->pdev, sizeof(*c), | |
2285 | c, (dma_addr_t) c->busaddr); | |
2286 | } | |
2287 | ||
2288 | #ifdef CONFIG_COMPAT | |
2289 | ||
2290 | static int do_ioctl(struct scsi_device *dev, int cmd, void *arg) | |
2291 | { | |
2292 | int ret; | |
2293 | ||
2294 | lock_kernel(); | |
2295 | ret = hpsa_ioctl(dev, cmd, arg); | |
2296 | unlock_kernel(); | |
2297 | return ret; | |
2298 | } | |
2299 | ||
2300 | static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg); | |
2301 | static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, | |
2302 | int cmd, void *arg); | |
2303 | ||
2304 | static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) | |
2305 | { | |
2306 | switch (cmd) { | |
2307 | case CCISS_GETPCIINFO: | |
2308 | case CCISS_GETINTINFO: | |
2309 | case CCISS_SETINTINFO: | |
2310 | case CCISS_GETNODENAME: | |
2311 | case CCISS_SETNODENAME: | |
2312 | case CCISS_GETHEARTBEAT: | |
2313 | case CCISS_GETBUSTYPES: | |
2314 | case CCISS_GETFIRMVER: | |
2315 | case CCISS_GETDRIVVER: | |
2316 | case CCISS_REVALIDVOLS: | |
2317 | case CCISS_DEREGDISK: | |
2318 | case CCISS_REGNEWDISK: | |
2319 | case CCISS_REGNEWD: | |
2320 | case CCISS_RESCANDISK: | |
2321 | case CCISS_GETLUNINFO: | |
2322 | return do_ioctl(dev, cmd, arg); | |
2323 | ||
2324 | case CCISS_PASSTHRU32: | |
2325 | return hpsa_ioctl32_passthru(dev, cmd, arg); | |
2326 | case CCISS_BIG_PASSTHRU32: | |
2327 | return hpsa_ioctl32_big_passthru(dev, cmd, arg); | |
2328 | ||
2329 | default: | |
2330 | return -ENOIOCTLCMD; | |
2331 | } | |
2332 | } | |
2333 | ||
2334 | static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) | |
2335 | { | |
2336 | IOCTL32_Command_struct __user *arg32 = | |
2337 | (IOCTL32_Command_struct __user *) arg; | |
2338 | IOCTL_Command_struct arg64; | |
2339 | IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); | |
2340 | int err; | |
2341 | u32 cp; | |
2342 | ||
2343 | err = 0; | |
2344 | err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, | |
2345 | sizeof(arg64.LUN_info)); | |
2346 | err |= copy_from_user(&arg64.Request, &arg32->Request, | |
2347 | sizeof(arg64.Request)); | |
2348 | err |= copy_from_user(&arg64.error_info, &arg32->error_info, | |
2349 | sizeof(arg64.error_info)); | |
2350 | err |= get_user(arg64.buf_size, &arg32->buf_size); | |
2351 | err |= get_user(cp, &arg32->buf); | |
2352 | arg64.buf = compat_ptr(cp); | |
2353 | err |= copy_to_user(p, &arg64, sizeof(arg64)); | |
2354 | ||
2355 | if (err) | |
2356 | return -EFAULT; | |
2357 | ||
2358 | err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p); | |
2359 | if (err) | |
2360 | return err; | |
2361 | err |= copy_in_user(&arg32->error_info, &p->error_info, | |
2362 | sizeof(arg32->error_info)); | |
2363 | if (err) | |
2364 | return -EFAULT; | |
2365 | return err; | |
2366 | } | |
2367 | ||
2368 | static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, | |
2369 | int cmd, void *arg) | |
2370 | { | |
2371 | BIG_IOCTL32_Command_struct __user *arg32 = | |
2372 | (BIG_IOCTL32_Command_struct __user *) arg; | |
2373 | BIG_IOCTL_Command_struct arg64; | |
2374 | BIG_IOCTL_Command_struct __user *p = | |
2375 | compat_alloc_user_space(sizeof(arg64)); | |
2376 | int err; | |
2377 | u32 cp; | |
2378 | ||
2379 | err = 0; | |
2380 | err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, | |
2381 | sizeof(arg64.LUN_info)); | |
2382 | err |= copy_from_user(&arg64.Request, &arg32->Request, | |
2383 | sizeof(arg64.Request)); | |
2384 | err |= copy_from_user(&arg64.error_info, &arg32->error_info, | |
2385 | sizeof(arg64.error_info)); | |
2386 | err |= get_user(arg64.buf_size, &arg32->buf_size); | |
2387 | err |= get_user(arg64.malloc_size, &arg32->malloc_size); | |
2388 | err |= get_user(cp, &arg32->buf); | |
2389 | arg64.buf = compat_ptr(cp); | |
2390 | err |= copy_to_user(p, &arg64, sizeof(arg64)); | |
2391 | ||
2392 | if (err) | |
2393 | return -EFAULT; | |
2394 | ||
2395 | err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); | |
2396 | if (err) | |
2397 | return err; | |
2398 | err |= copy_in_user(&arg32->error_info, &p->error_info, | |
2399 | sizeof(arg32->error_info)); | |
2400 | if (err) | |
2401 | return -EFAULT; | |
2402 | return err; | |
2403 | } | |
2404 | #endif | |
2405 | ||
2406 | static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) | |
2407 | { | |
2408 | struct hpsa_pci_info pciinfo; | |
2409 | ||
2410 | if (!argp) | |
2411 | return -EINVAL; | |
2412 | pciinfo.domain = pci_domain_nr(h->pdev->bus); | |
2413 | pciinfo.bus = h->pdev->bus->number; | |
2414 | pciinfo.dev_fn = h->pdev->devfn; | |
2415 | pciinfo.board_id = h->board_id; | |
2416 | if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) | |
2417 | return -EFAULT; | |
2418 | return 0; | |
2419 | } | |
2420 | ||
2421 | static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) | |
2422 | { | |
2423 | DriverVer_type DriverVer; | |
2424 | unsigned char vmaj, vmin, vsubmin; | |
2425 | int rc; | |
2426 | ||
2427 | rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", | |
2428 | &vmaj, &vmin, &vsubmin); | |
2429 | if (rc != 3) { | |
2430 | dev_info(&h->pdev->dev, "driver version string '%s' " | |
2431 | "unrecognized.", HPSA_DRIVER_VERSION); | |
2432 | vmaj = 0; | |
2433 | vmin = 0; | |
2434 | vsubmin = 0; | |
2435 | } | |
2436 | DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; | |
2437 | if (!argp) | |
2438 | return -EINVAL; | |
2439 | if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) | |
2440 | return -EFAULT; | |
2441 | return 0; | |
2442 | } | |
2443 | ||
2444 | static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) | |
2445 | { | |
2446 | IOCTL_Command_struct iocommand; | |
2447 | struct CommandList *c; | |
2448 | char *buff = NULL; | |
2449 | union u64bit temp64; | |
2450 | ||
2451 | if (!argp) | |
2452 | return -EINVAL; | |
2453 | if (!capable(CAP_SYS_RAWIO)) | |
2454 | return -EPERM; | |
2455 | if (copy_from_user(&iocommand, argp, sizeof(iocommand))) | |
2456 | return -EFAULT; | |
2457 | if ((iocommand.buf_size < 1) && | |
2458 | (iocommand.Request.Type.Direction != XFER_NONE)) { | |
2459 | return -EINVAL; | |
2460 | } | |
2461 | if (iocommand.buf_size > 0) { | |
2462 | buff = kmalloc(iocommand.buf_size, GFP_KERNEL); | |
2463 | if (buff == NULL) | |
2464 | return -EFAULT; | |
2465 | } | |
2466 | if (iocommand.Request.Type.Direction == XFER_WRITE) { | |
2467 | /* Copy the data into the buffer we created */ | |
2468 | if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { | |
2469 | kfree(buff); | |
2470 | return -EFAULT; | |
2471 | } | |
2472 | } else | |
2473 | memset(buff, 0, iocommand.buf_size); | |
2474 | c = cmd_special_alloc(h); | |
2475 | if (c == NULL) { | |
2476 | kfree(buff); | |
2477 | return -ENOMEM; | |
2478 | } | |
2479 | /* Fill in the command type */ | |
2480 | c->cmd_type = CMD_IOCTL_PEND; | |
2481 | /* Fill in Command Header */ | |
2482 | c->Header.ReplyQueue = 0; /* unused in simple mode */ | |
2483 | if (iocommand.buf_size > 0) { /* buffer to fill */ | |
2484 | c->Header.SGList = 1; | |
2485 | c->Header.SGTotal = 1; | |
2486 | } else { /* no buffers to fill */ | |
2487 | c->Header.SGList = 0; | |
2488 | c->Header.SGTotal = 0; | |
2489 | } | |
2490 | memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); | |
2491 | /* use the kernel address the cmd block for tag */ | |
2492 | c->Header.Tag.lower = c->busaddr; | |
2493 | ||
2494 | /* Fill in Request block */ | |
2495 | memcpy(&c->Request, &iocommand.Request, | |
2496 | sizeof(c->Request)); | |
2497 | ||
2498 | /* Fill in the scatter gather information */ | |
2499 | if (iocommand.buf_size > 0) { | |
2500 | temp64.val = pci_map_single(h->pdev, buff, | |
2501 | iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); | |
2502 | c->SG[0].Addr.lower = temp64.val32.lower; | |
2503 | c->SG[0].Addr.upper = temp64.val32.upper; | |
2504 | c->SG[0].Len = iocommand.buf_size; | |
2505 | c->SG[0].Ext = 0; /* we are not chaining*/ | |
2506 | } | |
2507 | hpsa_scsi_do_simple_cmd_core(h, c); | |
2508 | hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); | |
2509 | check_ioctl_unit_attention(h, c); | |
2510 | ||
2511 | /* Copy the error information out */ | |
2512 | memcpy(&iocommand.error_info, c->err_info, | |
2513 | sizeof(iocommand.error_info)); | |
2514 | if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { | |
2515 | kfree(buff); | |
2516 | cmd_special_free(h, c); | |
2517 | return -EFAULT; | |
2518 | } | |
2519 | ||
2520 | if (iocommand.Request.Type.Direction == XFER_READ) { | |
2521 | /* Copy the data out of the buffer we created */ | |
2522 | if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { | |
2523 | kfree(buff); | |
2524 | cmd_special_free(h, c); | |
2525 | return -EFAULT; | |
2526 | } | |
2527 | } | |
2528 | kfree(buff); | |
2529 | cmd_special_free(h, c); | |
2530 | return 0; | |
2531 | } | |
2532 | ||
2533 | static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) | |
2534 | { | |
2535 | BIG_IOCTL_Command_struct *ioc; | |
2536 | struct CommandList *c; | |
2537 | unsigned char **buff = NULL; | |
2538 | int *buff_size = NULL; | |
2539 | union u64bit temp64; | |
2540 | BYTE sg_used = 0; | |
2541 | int status = 0; | |
2542 | int i; | |
01a02ffc SC |
2543 | u32 left; |
2544 | u32 sz; | |
edd16368 SC |
2545 | BYTE __user *data_ptr; |
2546 | ||
2547 | if (!argp) | |
2548 | return -EINVAL; | |
2549 | if (!capable(CAP_SYS_RAWIO)) | |
2550 | return -EPERM; | |
2551 | ioc = (BIG_IOCTL_Command_struct *) | |
2552 | kmalloc(sizeof(*ioc), GFP_KERNEL); | |
2553 | if (!ioc) { | |
2554 | status = -ENOMEM; | |
2555 | goto cleanup1; | |
2556 | } | |
2557 | if (copy_from_user(ioc, argp, sizeof(*ioc))) { | |
2558 | status = -EFAULT; | |
2559 | goto cleanup1; | |
2560 | } | |
2561 | if ((ioc->buf_size < 1) && | |
2562 | (ioc->Request.Type.Direction != XFER_NONE)) { | |
2563 | status = -EINVAL; | |
2564 | goto cleanup1; | |
2565 | } | |
2566 | /* Check kmalloc limits using all SGs */ | |
2567 | if (ioc->malloc_size > MAX_KMALLOC_SIZE) { | |
2568 | status = -EINVAL; | |
2569 | goto cleanup1; | |
2570 | } | |
2571 | if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { | |
2572 | status = -EINVAL; | |
2573 | goto cleanup1; | |
2574 | } | |
2575 | buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); | |
2576 | if (!buff) { | |
2577 | status = -ENOMEM; | |
2578 | goto cleanup1; | |
2579 | } | |
2580 | buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); | |
2581 | if (!buff_size) { | |
2582 | status = -ENOMEM; | |
2583 | goto cleanup1; | |
2584 | } | |
2585 | left = ioc->buf_size; | |
2586 | data_ptr = ioc->buf; | |
2587 | while (left) { | |
2588 | sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; | |
2589 | buff_size[sg_used] = sz; | |
2590 | buff[sg_used] = kmalloc(sz, GFP_KERNEL); | |
2591 | if (buff[sg_used] == NULL) { | |
2592 | status = -ENOMEM; | |
2593 | goto cleanup1; | |
2594 | } | |
2595 | if (ioc->Request.Type.Direction == XFER_WRITE) { | |
2596 | if (copy_from_user(buff[sg_used], data_ptr, sz)) { | |
2597 | status = -ENOMEM; | |
2598 | goto cleanup1; | |
2599 | } | |
2600 | } else | |
2601 | memset(buff[sg_used], 0, sz); | |
2602 | left -= sz; | |
2603 | data_ptr += sz; | |
2604 | sg_used++; | |
2605 | } | |
2606 | c = cmd_special_alloc(h); | |
2607 | if (c == NULL) { | |
2608 | status = -ENOMEM; | |
2609 | goto cleanup1; | |
2610 | } | |
2611 | c->cmd_type = CMD_IOCTL_PEND; | |
2612 | c->Header.ReplyQueue = 0; | |
2613 | ||
2614 | if (ioc->buf_size > 0) { | |
2615 | c->Header.SGList = sg_used; | |
2616 | c->Header.SGTotal = sg_used; | |
2617 | } else { | |
2618 | c->Header.SGList = 0; | |
2619 | c->Header.SGTotal = 0; | |
2620 | } | |
2621 | memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); | |
2622 | c->Header.Tag.lower = c->busaddr; | |
2623 | memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); | |
2624 | if (ioc->buf_size > 0) { | |
2625 | int i; | |
2626 | for (i = 0; i < sg_used; i++) { | |
2627 | temp64.val = pci_map_single(h->pdev, buff[i], | |
2628 | buff_size[i], PCI_DMA_BIDIRECTIONAL); | |
2629 | c->SG[i].Addr.lower = temp64.val32.lower; | |
2630 | c->SG[i].Addr.upper = temp64.val32.upper; | |
2631 | c->SG[i].Len = buff_size[i]; | |
2632 | /* we are not chaining */ | |
2633 | c->SG[i].Ext = 0; | |
2634 | } | |
2635 | } | |
2636 | hpsa_scsi_do_simple_cmd_core(h, c); | |
2637 | hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); | |
2638 | check_ioctl_unit_attention(h, c); | |
2639 | /* Copy the error information out */ | |
2640 | memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); | |
2641 | if (copy_to_user(argp, ioc, sizeof(*ioc))) { | |
2642 | cmd_special_free(h, c); | |
2643 | status = -EFAULT; | |
2644 | goto cleanup1; | |
2645 | } | |
2646 | if (ioc->Request.Type.Direction == XFER_READ) { | |
2647 | /* Copy the data out of the buffer we created */ | |
2648 | BYTE __user *ptr = ioc->buf; | |
2649 | for (i = 0; i < sg_used; i++) { | |
2650 | if (copy_to_user(ptr, buff[i], buff_size[i])) { | |
2651 | cmd_special_free(h, c); | |
2652 | status = -EFAULT; | |
2653 | goto cleanup1; | |
2654 | } | |
2655 | ptr += buff_size[i]; | |
2656 | } | |
2657 | } | |
2658 | cmd_special_free(h, c); | |
2659 | status = 0; | |
2660 | cleanup1: | |
2661 | if (buff) { | |
2662 | for (i = 0; i < sg_used; i++) | |
2663 | kfree(buff[i]); | |
2664 | kfree(buff); | |
2665 | } | |
2666 | kfree(buff_size); | |
2667 | kfree(ioc); | |
2668 | return status; | |
2669 | } | |
2670 | ||
2671 | static void check_ioctl_unit_attention(struct ctlr_info *h, | |
2672 | struct CommandList *c) | |
2673 | { | |
2674 | if (c->err_info->CommandStatus == CMD_TARGET_STATUS && | |
2675 | c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) | |
2676 | (void) check_for_unit_attention(h, c); | |
2677 | } | |
2678 | /* | |
2679 | * ioctl | |
2680 | */ | |
2681 | static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) | |
2682 | { | |
2683 | struct ctlr_info *h; | |
2684 | void __user *argp = (void __user *)arg; | |
2685 | ||
2686 | h = sdev_to_hba(dev); | |
2687 | ||
2688 | switch (cmd) { | |
2689 | case CCISS_DEREGDISK: | |
2690 | case CCISS_REGNEWDISK: | |
2691 | case CCISS_REGNEWD: | |
a08a8471 | 2692 | hpsa_scan_start(h->scsi_host); |
edd16368 SC |
2693 | return 0; |
2694 | case CCISS_GETPCIINFO: | |
2695 | return hpsa_getpciinfo_ioctl(h, argp); | |
2696 | case CCISS_GETDRIVVER: | |
2697 | return hpsa_getdrivver_ioctl(h, argp); | |
2698 | case CCISS_PASSTHRU: | |
2699 | return hpsa_passthru_ioctl(h, argp); | |
2700 | case CCISS_BIG_PASSTHRU: | |
2701 | return hpsa_big_passthru_ioctl(h, argp); | |
2702 | default: | |
2703 | return -ENOTTY; | |
2704 | } | |
2705 | } | |
2706 | ||
01a02ffc SC |
2707 | static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, |
2708 | void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, | |
edd16368 SC |
2709 | int cmd_type) |
2710 | { | |
2711 | int pci_dir = XFER_NONE; | |
2712 | ||
2713 | c->cmd_type = CMD_IOCTL_PEND; | |
2714 | c->Header.ReplyQueue = 0; | |
2715 | if (buff != NULL && size > 0) { | |
2716 | c->Header.SGList = 1; | |
2717 | c->Header.SGTotal = 1; | |
2718 | } else { | |
2719 | c->Header.SGList = 0; | |
2720 | c->Header.SGTotal = 0; | |
2721 | } | |
2722 | c->Header.Tag.lower = c->busaddr; | |
2723 | memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); | |
2724 | ||
2725 | c->Request.Type.Type = cmd_type; | |
2726 | if (cmd_type == TYPE_CMD) { | |
2727 | switch (cmd) { | |
2728 | case HPSA_INQUIRY: | |
2729 | /* are we trying to read a vital product page */ | |
2730 | if (page_code != 0) { | |
2731 | c->Request.CDB[1] = 0x01; | |
2732 | c->Request.CDB[2] = page_code; | |
2733 | } | |
2734 | c->Request.CDBLen = 6; | |
2735 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2736 | c->Request.Type.Direction = XFER_READ; | |
2737 | c->Request.Timeout = 0; | |
2738 | c->Request.CDB[0] = HPSA_INQUIRY; | |
2739 | c->Request.CDB[4] = size & 0xFF; | |
2740 | break; | |
2741 | case HPSA_REPORT_LOG: | |
2742 | case HPSA_REPORT_PHYS: | |
2743 | /* Talking to controller so It's a physical command | |
2744 | mode = 00 target = 0. Nothing to write. | |
2745 | */ | |
2746 | c->Request.CDBLen = 12; | |
2747 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2748 | c->Request.Type.Direction = XFER_READ; | |
2749 | c->Request.Timeout = 0; | |
2750 | c->Request.CDB[0] = cmd; | |
2751 | c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ | |
2752 | c->Request.CDB[7] = (size >> 16) & 0xFF; | |
2753 | c->Request.CDB[8] = (size >> 8) & 0xFF; | |
2754 | c->Request.CDB[9] = size & 0xFF; | |
2755 | break; | |
2756 | ||
2757 | case HPSA_READ_CAPACITY: | |
2758 | c->Request.CDBLen = 10; | |
2759 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2760 | c->Request.Type.Direction = XFER_READ; | |
2761 | c->Request.Timeout = 0; | |
2762 | c->Request.CDB[0] = cmd; | |
2763 | break; | |
2764 | case HPSA_CACHE_FLUSH: | |
2765 | c->Request.CDBLen = 12; | |
2766 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2767 | c->Request.Type.Direction = XFER_WRITE; | |
2768 | c->Request.Timeout = 0; | |
2769 | c->Request.CDB[0] = BMIC_WRITE; | |
2770 | c->Request.CDB[6] = BMIC_CACHE_FLUSH; | |
2771 | break; | |
2772 | case TEST_UNIT_READY: | |
2773 | c->Request.CDBLen = 6; | |
2774 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2775 | c->Request.Type.Direction = XFER_NONE; | |
2776 | c->Request.Timeout = 0; | |
2777 | break; | |
2778 | default: | |
2779 | dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); | |
2780 | BUG(); | |
2781 | return; | |
2782 | } | |
2783 | } else if (cmd_type == TYPE_MSG) { | |
2784 | switch (cmd) { | |
2785 | ||
2786 | case HPSA_DEVICE_RESET_MSG: | |
2787 | c->Request.CDBLen = 16; | |
2788 | c->Request.Type.Type = 1; /* It is a MSG not a CMD */ | |
2789 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2790 | c->Request.Type.Direction = XFER_NONE; | |
2791 | c->Request.Timeout = 0; /* Don't time out */ | |
2792 | c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ | |
2793 | c->Request.CDB[1] = 0x03; /* Reset target above */ | |
2794 | /* If bytes 4-7 are zero, it means reset the */ | |
2795 | /* LunID device */ | |
2796 | c->Request.CDB[4] = 0x00; | |
2797 | c->Request.CDB[5] = 0x00; | |
2798 | c->Request.CDB[6] = 0x00; | |
2799 | c->Request.CDB[7] = 0x00; | |
2800 | break; | |
2801 | ||
2802 | default: | |
2803 | dev_warn(&h->pdev->dev, "unknown message type %d\n", | |
2804 | cmd); | |
2805 | BUG(); | |
2806 | } | |
2807 | } else { | |
2808 | dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); | |
2809 | BUG(); | |
2810 | } | |
2811 | ||
2812 | switch (c->Request.Type.Direction) { | |
2813 | case XFER_READ: | |
2814 | pci_dir = PCI_DMA_FROMDEVICE; | |
2815 | break; | |
2816 | case XFER_WRITE: | |
2817 | pci_dir = PCI_DMA_TODEVICE; | |
2818 | break; | |
2819 | case XFER_NONE: | |
2820 | pci_dir = PCI_DMA_NONE; | |
2821 | break; | |
2822 | default: | |
2823 | pci_dir = PCI_DMA_BIDIRECTIONAL; | |
2824 | } | |
2825 | ||
2826 | hpsa_map_one(h->pdev, c, buff, size, pci_dir); | |
2827 | ||
2828 | return; | |
2829 | } | |
2830 | ||
2831 | /* | |
2832 | * Map (physical) PCI mem into (virtual) kernel space | |
2833 | */ | |
2834 | static void __iomem *remap_pci_mem(ulong base, ulong size) | |
2835 | { | |
2836 | ulong page_base = ((ulong) base) & PAGE_MASK; | |
2837 | ulong page_offs = ((ulong) base) - page_base; | |
2838 | void __iomem *page_remapped = ioremap(page_base, page_offs + size); | |
2839 | ||
2840 | return page_remapped ? (page_remapped + page_offs) : NULL; | |
2841 | } | |
2842 | ||
2843 | /* Takes cmds off the submission queue and sends them to the hardware, | |
2844 | * then puts them on the queue of cmds waiting for completion. | |
2845 | */ | |
2846 | static void start_io(struct ctlr_info *h) | |
2847 | { | |
2848 | struct CommandList *c; | |
2849 | ||
2850 | while (!hlist_empty(&h->reqQ)) { | |
2851 | c = hlist_entry(h->reqQ.first, struct CommandList, list); | |
2852 | /* can't do anything if fifo is full */ | |
2853 | if ((h->access.fifo_full(h))) { | |
2854 | dev_warn(&h->pdev->dev, "fifo full\n"); | |
2855 | break; | |
2856 | } | |
2857 | ||
2858 | /* Get the first entry from the Request Q */ | |
2859 | removeQ(c); | |
2860 | h->Qdepth--; | |
2861 | ||
2862 | /* Tell the controller execute command */ | |
2863 | h->access.submit_command(h, c); | |
2864 | ||
2865 | /* Put job onto the completed Q */ | |
2866 | addQ(&h->cmpQ, c); | |
2867 | } | |
2868 | } | |
2869 | ||
2870 | static inline unsigned long get_next_completion(struct ctlr_info *h) | |
2871 | { | |
2872 | return h->access.command_completed(h); | |
2873 | } | |
2874 | ||
900c5440 | 2875 | static inline bool interrupt_pending(struct ctlr_info *h) |
edd16368 SC |
2876 | { |
2877 | return h->access.intr_pending(h); | |
2878 | } | |
2879 | ||
2880 | static inline long interrupt_not_for_us(struct ctlr_info *h) | |
2881 | { | |
303932fd DB |
2882 | return !(h->msi_vector || h->msix_vector) && |
2883 | ((h->access.intr_pending(h) == 0) || | |
2884 | (h->interrupts_enabled == 0)); | |
edd16368 SC |
2885 | } |
2886 | ||
01a02ffc SC |
2887 | static inline int bad_tag(struct ctlr_info *h, u32 tag_index, |
2888 | u32 raw_tag) | |
edd16368 SC |
2889 | { |
2890 | if (unlikely(tag_index >= h->nr_cmds)) { | |
2891 | dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); | |
2892 | return 1; | |
2893 | } | |
2894 | return 0; | |
2895 | } | |
2896 | ||
01a02ffc | 2897 | static inline void finish_cmd(struct CommandList *c, u32 raw_tag) |
edd16368 SC |
2898 | { |
2899 | removeQ(c); | |
2900 | if (likely(c->cmd_type == CMD_SCSI)) | |
2901 | complete_scsi_command(c, 0, raw_tag); | |
2902 | else if (c->cmd_type == CMD_IOCTL_PEND) | |
2903 | complete(c->waiting); | |
2904 | } | |
2905 | ||
a104c99f SC |
2906 | static inline u32 hpsa_tag_contains_index(u32 tag) |
2907 | { | |
303932fd | 2908 | #define DIRECT_LOOKUP_BIT 0x10 |
a104c99f SC |
2909 | return tag & DIRECT_LOOKUP_BIT; |
2910 | } | |
2911 | ||
2912 | static inline u32 hpsa_tag_to_index(u32 tag) | |
2913 | { | |
303932fd | 2914 | #define DIRECT_LOOKUP_SHIFT 5 |
a104c99f SC |
2915 | return tag >> DIRECT_LOOKUP_SHIFT; |
2916 | } | |
2917 | ||
2918 | static inline u32 hpsa_tag_discard_error_bits(u32 tag) | |
2919 | { | |
2920 | #define HPSA_ERROR_BITS 0x03 | |
2921 | return tag & ~HPSA_ERROR_BITS; | |
2922 | } | |
2923 | ||
303932fd DB |
2924 | /* process completion of an indexed ("direct lookup") command */ |
2925 | static inline u32 process_indexed_cmd(struct ctlr_info *h, | |
2926 | u32 raw_tag) | |
2927 | { | |
2928 | u32 tag_index; | |
2929 | struct CommandList *c; | |
2930 | ||
2931 | tag_index = hpsa_tag_to_index(raw_tag); | |
2932 | if (bad_tag(h, tag_index, raw_tag)) | |
2933 | return next_command(h); | |
2934 | c = h->cmd_pool + tag_index; | |
2935 | finish_cmd(c, raw_tag); | |
2936 | return next_command(h); | |
2937 | } | |
2938 | ||
2939 | /* process completion of a non-indexed command */ | |
2940 | static inline u32 process_nonindexed_cmd(struct ctlr_info *h, | |
2941 | u32 raw_tag) | |
2942 | { | |
2943 | u32 tag; | |
2944 | struct CommandList *c = NULL; | |
2945 | struct hlist_node *tmp; | |
2946 | ||
2947 | tag = hpsa_tag_discard_error_bits(raw_tag); | |
2948 | hlist_for_each_entry(c, tmp, &h->cmpQ, list) { | |
2949 | if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) { | |
2950 | finish_cmd(c, raw_tag); | |
2951 | return next_command(h); | |
2952 | } | |
2953 | } | |
2954 | bad_tag(h, h->nr_cmds + 1, raw_tag); | |
2955 | return next_command(h); | |
2956 | } | |
2957 | ||
edd16368 SC |
2958 | static irqreturn_t do_hpsa_intr(int irq, void *dev_id) |
2959 | { | |
2960 | struct ctlr_info *h = dev_id; | |
edd16368 | 2961 | unsigned long flags; |
303932fd | 2962 | u32 raw_tag; |
edd16368 SC |
2963 | |
2964 | if (interrupt_not_for_us(h)) | |
2965 | return IRQ_NONE; | |
2966 | spin_lock_irqsave(&h->lock, flags); | |
303932fd DB |
2967 | raw_tag = get_next_completion(h); |
2968 | while (raw_tag != FIFO_EMPTY) { | |
2969 | if (hpsa_tag_contains_index(raw_tag)) | |
2970 | raw_tag = process_indexed_cmd(h, raw_tag); | |
2971 | else | |
2972 | raw_tag = process_nonindexed_cmd(h, raw_tag); | |
edd16368 SC |
2973 | } |
2974 | spin_unlock_irqrestore(&h->lock, flags); | |
2975 | return IRQ_HANDLED; | |
2976 | } | |
2977 | ||
303932fd | 2978 | /* Send a message CDB to the firmwart. */ |
edd16368 SC |
2979 | static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, |
2980 | unsigned char type) | |
2981 | { | |
2982 | struct Command { | |
2983 | struct CommandListHeader CommandHeader; | |
2984 | struct RequestBlock Request; | |
2985 | struct ErrDescriptor ErrorDescriptor; | |
2986 | }; | |
2987 | struct Command *cmd; | |
2988 | static const size_t cmd_sz = sizeof(*cmd) + | |
2989 | sizeof(cmd->ErrorDescriptor); | |
2990 | dma_addr_t paddr64; | |
2991 | uint32_t paddr32, tag; | |
2992 | void __iomem *vaddr; | |
2993 | int i, err; | |
2994 | ||
2995 | vaddr = pci_ioremap_bar(pdev, 0); | |
2996 | if (vaddr == NULL) | |
2997 | return -ENOMEM; | |
2998 | ||
2999 | /* The Inbound Post Queue only accepts 32-bit physical addresses for the | |
3000 | * CCISS commands, so they must be allocated from the lower 4GiB of | |
3001 | * memory. | |
3002 | */ | |
3003 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); | |
3004 | if (err) { | |
3005 | iounmap(vaddr); | |
3006 | return -ENOMEM; | |
3007 | } | |
3008 | ||
3009 | cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); | |
3010 | if (cmd == NULL) { | |
3011 | iounmap(vaddr); | |
3012 | return -ENOMEM; | |
3013 | } | |
3014 | ||
3015 | /* This must fit, because of the 32-bit consistent DMA mask. Also, | |
3016 | * although there's no guarantee, we assume that the address is at | |
3017 | * least 4-byte aligned (most likely, it's page-aligned). | |
3018 | */ | |
3019 | paddr32 = paddr64; | |
3020 | ||
3021 | cmd->CommandHeader.ReplyQueue = 0; | |
3022 | cmd->CommandHeader.SGList = 0; | |
3023 | cmd->CommandHeader.SGTotal = 0; | |
3024 | cmd->CommandHeader.Tag.lower = paddr32; | |
3025 | cmd->CommandHeader.Tag.upper = 0; | |
3026 | memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); | |
3027 | ||
3028 | cmd->Request.CDBLen = 16; | |
3029 | cmd->Request.Type.Type = TYPE_MSG; | |
3030 | cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; | |
3031 | cmd->Request.Type.Direction = XFER_NONE; | |
3032 | cmd->Request.Timeout = 0; /* Don't time out */ | |
3033 | cmd->Request.CDB[0] = opcode; | |
3034 | cmd->Request.CDB[1] = type; | |
3035 | memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ | |
3036 | cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd); | |
3037 | cmd->ErrorDescriptor.Addr.upper = 0; | |
3038 | cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo); | |
3039 | ||
3040 | writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); | |
3041 | ||
3042 | for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { | |
3043 | tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); | |
a104c99f | 3044 | if (hpsa_tag_discard_error_bits(tag) == paddr32) |
edd16368 SC |
3045 | break; |
3046 | msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); | |
3047 | } | |
3048 | ||
3049 | iounmap(vaddr); | |
3050 | ||
3051 | /* we leak the DMA buffer here ... no choice since the controller could | |
3052 | * still complete the command. | |
3053 | */ | |
3054 | if (i == HPSA_MSG_SEND_RETRY_LIMIT) { | |
3055 | dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", | |
3056 | opcode, type); | |
3057 | return -ETIMEDOUT; | |
3058 | } | |
3059 | ||
3060 | pci_free_consistent(pdev, cmd_sz, cmd, paddr64); | |
3061 | ||
3062 | if (tag & HPSA_ERROR_BIT) { | |
3063 | dev_err(&pdev->dev, "controller message %02x:%02x failed\n", | |
3064 | opcode, type); | |
3065 | return -EIO; | |
3066 | } | |
3067 | ||
3068 | dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", | |
3069 | opcode, type); | |
3070 | return 0; | |
3071 | } | |
3072 | ||
3073 | #define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0) | |
3074 | #define hpsa_noop(p) hpsa_message(p, 3, 0) | |
3075 | ||
3076 | static __devinit int hpsa_reset_msi(struct pci_dev *pdev) | |
3077 | { | |
3078 | /* the #defines are stolen from drivers/pci/msi.h. */ | |
3079 | #define msi_control_reg(base) (base + PCI_MSI_FLAGS) | |
3080 | #define PCI_MSIX_FLAGS_ENABLE (1 << 15) | |
3081 | ||
3082 | int pos; | |
3083 | u16 control = 0; | |
3084 | ||
3085 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); | |
3086 | if (pos) { | |
3087 | pci_read_config_word(pdev, msi_control_reg(pos), &control); | |
3088 | if (control & PCI_MSI_FLAGS_ENABLE) { | |
3089 | dev_info(&pdev->dev, "resetting MSI\n"); | |
3090 | pci_write_config_word(pdev, msi_control_reg(pos), | |
3091 | control & ~PCI_MSI_FLAGS_ENABLE); | |
3092 | } | |
3093 | } | |
3094 | ||
3095 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); | |
3096 | if (pos) { | |
3097 | pci_read_config_word(pdev, msi_control_reg(pos), &control); | |
3098 | if (control & PCI_MSIX_FLAGS_ENABLE) { | |
3099 | dev_info(&pdev->dev, "resetting MSI-X\n"); | |
3100 | pci_write_config_word(pdev, msi_control_reg(pos), | |
3101 | control & ~PCI_MSIX_FLAGS_ENABLE); | |
3102 | } | |
3103 | } | |
3104 | ||
3105 | return 0; | |
3106 | } | |
3107 | ||
3108 | /* This does a hard reset of the controller using PCI power management | |
3109 | * states. | |
3110 | */ | |
3111 | static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev) | |
3112 | { | |
3113 | u16 pmcsr, saved_config_space[32]; | |
3114 | int i, pos; | |
3115 | ||
3116 | dev_info(&pdev->dev, "using PCI PM to reset controller\n"); | |
3117 | ||
3118 | /* This is very nearly the same thing as | |
3119 | * | |
3120 | * pci_save_state(pci_dev); | |
3121 | * pci_set_power_state(pci_dev, PCI_D3hot); | |
3122 | * pci_set_power_state(pci_dev, PCI_D0); | |
3123 | * pci_restore_state(pci_dev); | |
3124 | * | |
3125 | * but we can't use these nice canned kernel routines on | |
3126 | * kexec, because they also check the MSI/MSI-X state in PCI | |
3127 | * configuration space and do the wrong thing when it is | |
3128 | * set/cleared. Also, the pci_save/restore_state functions | |
3129 | * violate the ordering requirements for restoring the | |
3130 | * configuration space from the CCISS document (see the | |
3131 | * comment below). So we roll our own .... | |
3132 | */ | |
3133 | ||
3134 | for (i = 0; i < 32; i++) | |
3135 | pci_read_config_word(pdev, 2*i, &saved_config_space[i]); | |
3136 | ||
3137 | pos = pci_find_capability(pdev, PCI_CAP_ID_PM); | |
3138 | if (pos == 0) { | |
3139 | dev_err(&pdev->dev, | |
3140 | "hpsa_reset_controller: PCI PM not supported\n"); | |
3141 | return -ENODEV; | |
3142 | } | |
3143 | ||
3144 | /* Quoting from the Open CISS Specification: "The Power | |
3145 | * Management Control/Status Register (CSR) controls the power | |
3146 | * state of the device. The normal operating state is D0, | |
3147 | * CSR=00h. The software off state is D3, CSR=03h. To reset | |
3148 | * the controller, place the interface device in D3 then to | |
3149 | * D0, this causes a secondary PCI reset which will reset the | |
3150 | * controller." | |
3151 | */ | |
3152 | ||
3153 | /* enter the D3hot power management state */ | |
3154 | pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); | |
3155 | pmcsr &= ~PCI_PM_CTRL_STATE_MASK; | |
3156 | pmcsr |= PCI_D3hot; | |
3157 | pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); | |
3158 | ||
3159 | msleep(500); | |
3160 | ||
3161 | /* enter the D0 power management state */ | |
3162 | pmcsr &= ~PCI_PM_CTRL_STATE_MASK; | |
3163 | pmcsr |= PCI_D0; | |
3164 | pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); | |
3165 | ||
3166 | msleep(500); | |
3167 | ||
3168 | /* Restore the PCI configuration space. The Open CISS | |
3169 | * Specification says, "Restore the PCI Configuration | |
3170 | * Registers, offsets 00h through 60h. It is important to | |
3171 | * restore the command register, 16-bits at offset 04h, | |
3172 | * last. Do not restore the configuration status register, | |
3173 | * 16-bits at offset 06h." Note that the offset is 2*i. | |
3174 | */ | |
3175 | for (i = 0; i < 32; i++) { | |
3176 | if (i == 2 || i == 3) | |
3177 | continue; | |
3178 | pci_write_config_word(pdev, 2*i, saved_config_space[i]); | |
3179 | } | |
3180 | wmb(); | |
3181 | pci_write_config_word(pdev, 4, saved_config_space[2]); | |
3182 | ||
3183 | return 0; | |
3184 | } | |
3185 | ||
3186 | /* | |
3187 | * We cannot read the structure directly, for portability we must use | |
3188 | * the io functions. | |
3189 | * This is for debug only. | |
3190 | */ | |
3191 | #ifdef HPSA_DEBUG | |
3192 | static void print_cfg_table(struct device *dev, struct CfgTable *tb) | |
3193 | { | |
3194 | int i; | |
3195 | char temp_name[17]; | |
3196 | ||
3197 | dev_info(dev, "Controller Configuration information\n"); | |
3198 | dev_info(dev, "------------------------------------\n"); | |
3199 | for (i = 0; i < 4; i++) | |
3200 | temp_name[i] = readb(&(tb->Signature[i])); | |
3201 | temp_name[4] = '\0'; | |
3202 | dev_info(dev, " Signature = %s\n", temp_name); | |
3203 | dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); | |
3204 | dev_info(dev, " Transport methods supported = 0x%x\n", | |
3205 | readl(&(tb->TransportSupport))); | |
3206 | dev_info(dev, " Transport methods active = 0x%x\n", | |
3207 | readl(&(tb->TransportActive))); | |
3208 | dev_info(dev, " Requested transport Method = 0x%x\n", | |
3209 | readl(&(tb->HostWrite.TransportRequest))); | |
3210 | dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", | |
3211 | readl(&(tb->HostWrite.CoalIntDelay))); | |
3212 | dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", | |
3213 | readl(&(tb->HostWrite.CoalIntCount))); | |
3214 | dev_info(dev, " Max outstanding commands = 0x%d\n", | |
3215 | readl(&(tb->CmdsOutMax))); | |
3216 | dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); | |
3217 | for (i = 0; i < 16; i++) | |
3218 | temp_name[i] = readb(&(tb->ServerName[i])); | |
3219 | temp_name[16] = '\0'; | |
3220 | dev_info(dev, " Server Name = %s\n", temp_name); | |
3221 | dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", | |
3222 | readl(&(tb->HeartBeat))); | |
3223 | } | |
3224 | #endif /* HPSA_DEBUG */ | |
3225 | ||
3226 | static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) | |
3227 | { | |
3228 | int i, offset, mem_type, bar_type; | |
3229 | ||
3230 | if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ | |
3231 | return 0; | |
3232 | offset = 0; | |
3233 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | |
3234 | bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; | |
3235 | if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) | |
3236 | offset += 4; | |
3237 | else { | |
3238 | mem_type = pci_resource_flags(pdev, i) & | |
3239 | PCI_BASE_ADDRESS_MEM_TYPE_MASK; | |
3240 | switch (mem_type) { | |
3241 | case PCI_BASE_ADDRESS_MEM_TYPE_32: | |
3242 | case PCI_BASE_ADDRESS_MEM_TYPE_1M: | |
3243 | offset += 4; /* 32 bit */ | |
3244 | break; | |
3245 | case PCI_BASE_ADDRESS_MEM_TYPE_64: | |
3246 | offset += 8; | |
3247 | break; | |
3248 | default: /* reserved in PCI 2.2 */ | |
3249 | dev_warn(&pdev->dev, | |
3250 | "base address is invalid\n"); | |
3251 | return -1; | |
3252 | break; | |
3253 | } | |
3254 | } | |
3255 | if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) | |
3256 | return i + 1; | |
3257 | } | |
3258 | return -1; | |
3259 | } | |
3260 | ||
3261 | /* If MSI/MSI-X is supported by the kernel we will try to enable it on | |
3262 | * controllers that are capable. If not, we use IO-APIC mode. | |
3263 | */ | |
3264 | ||
3265 | static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, | |
01a02ffc | 3266 | struct pci_dev *pdev, u32 board_id) |
edd16368 SC |
3267 | { |
3268 | #ifdef CONFIG_PCI_MSI | |
3269 | int err; | |
3270 | struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1}, | |
3271 | {0, 2}, {0, 3} | |
3272 | }; | |
3273 | ||
3274 | /* Some boards advertise MSI but don't really support it */ | |
3275 | if ((board_id == 0x40700E11) || | |
3276 | (board_id == 0x40800E11) || | |
3277 | (board_id == 0x40820E11) || (board_id == 0x40830E11)) | |
3278 | goto default_int_mode; | |
3279 | if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { | |
3280 | dev_info(&pdev->dev, "MSIX\n"); | |
3281 | err = pci_enable_msix(pdev, hpsa_msix_entries, 4); | |
3282 | if (!err) { | |
3283 | h->intr[0] = hpsa_msix_entries[0].vector; | |
3284 | h->intr[1] = hpsa_msix_entries[1].vector; | |
3285 | h->intr[2] = hpsa_msix_entries[2].vector; | |
3286 | h->intr[3] = hpsa_msix_entries[3].vector; | |
3287 | h->msix_vector = 1; | |
3288 | return; | |
3289 | } | |
3290 | if (err > 0) { | |
3291 | dev_warn(&pdev->dev, "only %d MSI-X vectors " | |
3292 | "available\n", err); | |
3293 | goto default_int_mode; | |
3294 | } else { | |
3295 | dev_warn(&pdev->dev, "MSI-X init failed %d\n", | |
3296 | err); | |
3297 | goto default_int_mode; | |
3298 | } | |
3299 | } | |
3300 | if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { | |
3301 | dev_info(&pdev->dev, "MSI\n"); | |
3302 | if (!pci_enable_msi(pdev)) | |
3303 | h->msi_vector = 1; | |
3304 | else | |
3305 | dev_warn(&pdev->dev, "MSI init failed\n"); | |
3306 | } | |
3307 | default_int_mode: | |
3308 | #endif /* CONFIG_PCI_MSI */ | |
3309 | /* if we get here we're going to use the default interrupt mode */ | |
303932fd | 3310 | h->intr[PERF_MODE_INT] = pdev->irq; |
edd16368 SC |
3311 | } |
3312 | ||
3313 | static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) | |
3314 | { | |
3315 | ushort subsystem_vendor_id, subsystem_device_id, command; | |
01a02ffc SC |
3316 | u32 board_id, scratchpad = 0; |
3317 | u64 cfg_offset; | |
3318 | u32 cfg_base_addr; | |
3319 | u64 cfg_base_addr_index; | |
303932fd | 3320 | u32 trans_offset; |
edd16368 SC |
3321 | int i, prod_index, err; |
3322 | ||
3323 | subsystem_vendor_id = pdev->subsystem_vendor; | |
3324 | subsystem_device_id = pdev->subsystem_device; | |
01a02ffc | 3325 | board_id = (((u32) (subsystem_device_id << 16) & 0xffff0000) | |
edd16368 SC |
3326 | subsystem_vendor_id); |
3327 | ||
3328 | for (i = 0; i < ARRAY_SIZE(products); i++) | |
3329 | if (board_id == products[i].board_id) | |
3330 | break; | |
3331 | ||
3332 | prod_index = i; | |
3333 | ||
3334 | if (prod_index == ARRAY_SIZE(products)) { | |
3335 | prod_index--; | |
3336 | if (subsystem_vendor_id != PCI_VENDOR_ID_HP || | |
3337 | !hpsa_allow_any) { | |
3338 | dev_warn(&pdev->dev, "unrecognized board ID:" | |
3339 | " 0x%08lx, ignoring.\n", | |
3340 | (unsigned long) board_id); | |
3341 | return -ENODEV; | |
3342 | } | |
3343 | } | |
3344 | /* check to see if controller has been disabled | |
3345 | * BEFORE trying to enable it | |
3346 | */ | |
3347 | (void)pci_read_config_word(pdev, PCI_COMMAND, &command); | |
3348 | if (!(command & 0x02)) { | |
3349 | dev_warn(&pdev->dev, "controller appears to be disabled\n"); | |
3350 | return -ENODEV; | |
3351 | } | |
3352 | ||
3353 | err = pci_enable_device(pdev); | |
3354 | if (err) { | |
3355 | dev_warn(&pdev->dev, "unable to enable PCI device\n"); | |
3356 | return err; | |
3357 | } | |
3358 | ||
3359 | err = pci_request_regions(pdev, "hpsa"); | |
3360 | if (err) { | |
3361 | dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); | |
3362 | return err; | |
3363 | } | |
3364 | ||
3365 | /* If the kernel supports MSI/MSI-X we will try to enable that, | |
3366 | * else we use the IO-APIC interrupt assigned to us by system ROM. | |
3367 | */ | |
3368 | hpsa_interrupt_mode(h, pdev, board_id); | |
3369 | ||
3370 | /* find the memory BAR */ | |
3371 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | |
3372 | if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) | |
3373 | break; | |
3374 | } | |
3375 | if (i == DEVICE_COUNT_RESOURCE) { | |
3376 | dev_warn(&pdev->dev, "no memory BAR found\n"); | |
3377 | err = -ENODEV; | |
3378 | goto err_out_free_res; | |
3379 | } | |
3380 | ||
3381 | h->paddr = pci_resource_start(pdev, i); /* addressing mode bits | |
3382 | * already removed | |
3383 | */ | |
3384 | ||
3385 | h->vaddr = remap_pci_mem(h->paddr, 0x250); | |
3386 | ||
3387 | /* Wait for the board to become ready. */ | |
3388 | for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) { | |
3389 | scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); | |
3390 | if (scratchpad == HPSA_FIRMWARE_READY) | |
3391 | break; | |
3392 | msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); | |
3393 | } | |
3394 | if (scratchpad != HPSA_FIRMWARE_READY) { | |
3395 | dev_warn(&pdev->dev, "board not ready, timed out.\n"); | |
3396 | err = -ENODEV; | |
3397 | goto err_out_free_res; | |
3398 | } | |
3399 | ||
3400 | /* get the address index number */ | |
3401 | cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET); | |
01a02ffc | 3402 | cfg_base_addr &= (u32) 0x0000ffff; |
edd16368 SC |
3403 | cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); |
3404 | if (cfg_base_addr_index == -1) { | |
3405 | dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); | |
3406 | err = -ENODEV; | |
3407 | goto err_out_free_res; | |
3408 | } | |
3409 | ||
3410 | cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET); | |
3411 | h->cfgtable = remap_pci_mem(pci_resource_start(pdev, | |
3412 | cfg_base_addr_index) + cfg_offset, | |
3413 | sizeof(h->cfgtable)); | |
303932fd DB |
3414 | /* Find performant mode table. */ |
3415 | trans_offset = readl(&(h->cfgtable->TransMethodOffset)); | |
3416 | h->transtable = remap_pci_mem(pci_resource_start(pdev, | |
3417 | cfg_base_addr_index)+cfg_offset+trans_offset, | |
3418 | sizeof(*h->transtable)); | |
edd16368 | 3419 | |
303932fd DB |
3420 | h->board_id = board_id; |
3421 | h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); | |
edd16368 SC |
3422 | h->product_name = products[prod_index].product_name; |
3423 | h->access = *(products[prod_index].access); | |
3424 | /* Allow room for some ioctls */ | |
3425 | h->nr_cmds = h->max_commands - 4; | |
3426 | ||
3427 | if ((readb(&h->cfgtable->Signature[0]) != 'C') || | |
3428 | (readb(&h->cfgtable->Signature[1]) != 'I') || | |
3429 | (readb(&h->cfgtable->Signature[2]) != 'S') || | |
3430 | (readb(&h->cfgtable->Signature[3]) != 'S')) { | |
3431 | dev_warn(&pdev->dev, "not a valid CISS config table\n"); | |
3432 | err = -ENODEV; | |
3433 | goto err_out_free_res; | |
3434 | } | |
3435 | #ifdef CONFIG_X86 | |
3436 | { | |
3437 | /* Need to enable prefetch in the SCSI core for 6400 in x86 */ | |
01a02ffc | 3438 | u32 prefetch; |
edd16368 SC |
3439 | prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); |
3440 | prefetch |= 0x100; | |
3441 | writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); | |
3442 | } | |
3443 | #endif | |
3444 | ||
3445 | /* Disabling DMA prefetch for the P600 | |
3446 | * An ASIC bug may result in a prefetch beyond | |
3447 | * physical memory. | |
3448 | */ | |
3449 | if (board_id == 0x3225103C) { | |
01a02ffc | 3450 | u32 dma_prefetch; |
edd16368 SC |
3451 | dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); |
3452 | dma_prefetch |= 0x8000; | |
3453 | writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); | |
3454 | } | |
3455 | ||
3456 | h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); | |
3457 | /* Update the field, and then ring the doorbell */ | |
3458 | writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); | |
3459 | writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); | |
3460 | ||
3461 | /* under certain very rare conditions, this can take awhile. | |
3462 | * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right | |
3463 | * as we enter this code.) | |
3464 | */ | |
3465 | for (i = 0; i < MAX_CONFIG_WAIT; i++) { | |
3466 | if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) | |
3467 | break; | |
3468 | /* delay and try again */ | |
3469 | msleep(10); | |
3470 | } | |
3471 | ||
3472 | #ifdef HPSA_DEBUG | |
3473 | print_cfg_table(&pdev->dev, h->cfgtable); | |
3474 | #endif /* HPSA_DEBUG */ | |
3475 | ||
3476 | if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { | |
3477 | dev_warn(&pdev->dev, "unable to get board into simple mode\n"); | |
3478 | err = -ENODEV; | |
3479 | goto err_out_free_res; | |
3480 | } | |
3481 | return 0; | |
3482 | ||
3483 | err_out_free_res: | |
3484 | /* | |
3485 | * Deliberately omit pci_disable_device(): it does something nasty to | |
3486 | * Smart Array controllers that pci_enable_device does not undo | |
3487 | */ | |
3488 | pci_release_regions(pdev); | |
3489 | return err; | |
3490 | } | |
3491 | ||
339b2b14 SC |
3492 | static void __devinit hpsa_hba_inquiry(struct ctlr_info *h) |
3493 | { | |
3494 | int rc; | |
3495 | ||
3496 | #define HBA_INQUIRY_BYTE_COUNT 64 | |
3497 | h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL); | |
3498 | if (!h->hba_inquiry_data) | |
3499 | return; | |
3500 | rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0, | |
3501 | h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT); | |
3502 | if (rc != 0) { | |
3503 | kfree(h->hba_inquiry_data); | |
3504 | h->hba_inquiry_data = NULL; | |
3505 | } | |
3506 | } | |
3507 | ||
edd16368 SC |
3508 | static int __devinit hpsa_init_one(struct pci_dev *pdev, |
3509 | const struct pci_device_id *ent) | |
3510 | { | |
ecd9aad4 | 3511 | int i, rc; |
edd16368 SC |
3512 | int dac; |
3513 | struct ctlr_info *h; | |
3514 | ||
3515 | if (number_of_controllers == 0) | |
3516 | printk(KERN_INFO DRIVER_NAME "\n"); | |
3517 | if (reset_devices) { | |
3518 | /* Reset the controller with a PCI power-cycle */ | |
3519 | if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev)) | |
3520 | return -ENODEV; | |
3521 | ||
3522 | /* Some devices (notably the HP Smart Array 5i Controller) | |
3523 | need a little pause here */ | |
3524 | msleep(HPSA_POST_RESET_PAUSE_MSECS); | |
3525 | ||
3526 | /* Now try to get the controller to respond to a no-op */ | |
3527 | for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { | |
3528 | if (hpsa_noop(pdev) == 0) | |
3529 | break; | |
3530 | else | |
3531 | dev_warn(&pdev->dev, "no-op failed%s\n", | |
3532 | (i < 11 ? "; re-trying" : "")); | |
3533 | } | |
3534 | } | |
3535 | ||
303932fd DB |
3536 | /* Command structures must be aligned on a 32-byte boundary because |
3537 | * the 5 lower bits of the address are used by the hardware. and by | |
3538 | * the driver. See comments in hpsa.h for more info. | |
3539 | */ | |
3540 | #define COMMANDLIST_ALIGNMENT 32 | |
3541 | BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); | |
edd16368 SC |
3542 | h = kzalloc(sizeof(*h), GFP_KERNEL); |
3543 | if (!h) | |
ecd9aad4 | 3544 | return -ENOMEM; |
edd16368 SC |
3545 | |
3546 | h->busy_initializing = 1; | |
3547 | INIT_HLIST_HEAD(&h->cmpQ); | |
3548 | INIT_HLIST_HEAD(&h->reqQ); | |
3549 | mutex_init(&h->busy_shutting_down); | |
3550 | init_completion(&h->scan_wait); | |
ecd9aad4 SC |
3551 | rc = hpsa_pci_init(h, pdev); |
3552 | if (rc != 0) | |
edd16368 SC |
3553 | goto clean1; |
3554 | ||
3555 | sprintf(h->devname, "hpsa%d", number_of_controllers); | |
3556 | h->ctlr = number_of_controllers; | |
3557 | number_of_controllers++; | |
3558 | h->pdev = pdev; | |
3559 | ||
3560 | /* configure PCI DMA stuff */ | |
ecd9aad4 SC |
3561 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); |
3562 | if (rc == 0) { | |
edd16368 | 3563 | dac = 1; |
ecd9aad4 SC |
3564 | } else { |
3565 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | |
3566 | if (rc == 0) { | |
3567 | dac = 0; | |
3568 | } else { | |
3569 | dev_err(&pdev->dev, "no suitable DMA available\n"); | |
3570 | goto clean1; | |
3571 | } | |
edd16368 SC |
3572 | } |
3573 | ||
3574 | /* make sure the board interrupts are off */ | |
3575 | h->access.set_intr_mask(h, HPSA_INTR_OFF); | |
303932fd DB |
3576 | rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr, |
3577 | IRQF_DISABLED, h->devname, h); | |
ecd9aad4 | 3578 | if (rc) { |
edd16368 | 3579 | dev_err(&pdev->dev, "unable to get irq %d for %s\n", |
303932fd | 3580 | h->intr[PERF_MODE_INT], h->devname); |
edd16368 SC |
3581 | goto clean2; |
3582 | } | |
3583 | ||
303932fd DB |
3584 | dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n", |
3585 | h->devname, pdev->device, | |
3586 | h->intr[PERF_MODE_INT], dac ? "" : " not"); | |
edd16368 SC |
3587 | |
3588 | h->cmd_pool_bits = | |
3589 | kmalloc(((h->nr_cmds + BITS_PER_LONG - | |
3590 | 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); | |
3591 | h->cmd_pool = pci_alloc_consistent(h->pdev, | |
3592 | h->nr_cmds * sizeof(*h->cmd_pool), | |
3593 | &(h->cmd_pool_dhandle)); | |
3594 | h->errinfo_pool = pci_alloc_consistent(h->pdev, | |
3595 | h->nr_cmds * sizeof(*h->errinfo_pool), | |
3596 | &(h->errinfo_pool_dhandle)); | |
3597 | if ((h->cmd_pool_bits == NULL) | |
3598 | || (h->cmd_pool == NULL) | |
3599 | || (h->errinfo_pool == NULL)) { | |
3600 | dev_err(&pdev->dev, "out of memory"); | |
ecd9aad4 | 3601 | rc = -ENOMEM; |
edd16368 SC |
3602 | goto clean4; |
3603 | } | |
3604 | spin_lock_init(&h->lock); | |
a08a8471 SC |
3605 | spin_lock_init(&h->scan_lock); |
3606 | init_waitqueue_head(&h->scan_wait_queue); | |
3607 | h->scan_finished = 1; /* no scan currently in progress */ | |
edd16368 SC |
3608 | |
3609 | pci_set_drvdata(pdev, h); | |
3610 | memset(h->cmd_pool_bits, 0, | |
3611 | ((h->nr_cmds + BITS_PER_LONG - | |
3612 | 1) / BITS_PER_LONG) * sizeof(unsigned long)); | |
3613 | ||
3614 | hpsa_scsi_setup(h); | |
3615 | ||
3616 | /* Turn the interrupts on so we can service requests */ | |
3617 | h->access.set_intr_mask(h, HPSA_INTR_ON); | |
3618 | ||
303932fd | 3619 | hpsa_put_ctlr_into_performant_mode(h); |
339b2b14 | 3620 | hpsa_hba_inquiry(h); |
edd16368 SC |
3621 | hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ |
3622 | h->busy_initializing = 0; | |
3623 | return 1; | |
3624 | ||
3625 | clean4: | |
3626 | kfree(h->cmd_pool_bits); | |
3627 | if (h->cmd_pool) | |
3628 | pci_free_consistent(h->pdev, | |
3629 | h->nr_cmds * sizeof(struct CommandList), | |
3630 | h->cmd_pool, h->cmd_pool_dhandle); | |
3631 | if (h->errinfo_pool) | |
3632 | pci_free_consistent(h->pdev, | |
3633 | h->nr_cmds * sizeof(struct ErrorInfo), | |
3634 | h->errinfo_pool, | |
3635 | h->errinfo_pool_dhandle); | |
303932fd | 3636 | free_irq(h->intr[PERF_MODE_INT], h); |
edd16368 SC |
3637 | clean2: |
3638 | clean1: | |
3639 | h->busy_initializing = 0; | |
3640 | kfree(h); | |
ecd9aad4 | 3641 | return rc; |
edd16368 SC |
3642 | } |
3643 | ||
3644 | static void hpsa_flush_cache(struct ctlr_info *h) | |
3645 | { | |
3646 | char *flush_buf; | |
3647 | struct CommandList *c; | |
3648 | ||
3649 | flush_buf = kzalloc(4, GFP_KERNEL); | |
3650 | if (!flush_buf) | |
3651 | return; | |
3652 | ||
3653 | c = cmd_special_alloc(h); | |
3654 | if (!c) { | |
3655 | dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); | |
3656 | goto out_of_memory; | |
3657 | } | |
3658 | fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, | |
3659 | RAID_CTLR_LUNID, TYPE_CMD); | |
3660 | hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); | |
3661 | if (c->err_info->CommandStatus != 0) | |
3662 | dev_warn(&h->pdev->dev, | |
3663 | "error flushing cache on controller\n"); | |
3664 | cmd_special_free(h, c); | |
3665 | out_of_memory: | |
3666 | kfree(flush_buf); | |
3667 | } | |
3668 | ||
3669 | static void hpsa_shutdown(struct pci_dev *pdev) | |
3670 | { | |
3671 | struct ctlr_info *h; | |
3672 | ||
3673 | h = pci_get_drvdata(pdev); | |
3674 | /* Turn board interrupts off and send the flush cache command | |
3675 | * sendcmd will turn off interrupt, and send the flush... | |
3676 | * To write all data in the battery backed cache to disks | |
3677 | */ | |
3678 | hpsa_flush_cache(h); | |
3679 | h->access.set_intr_mask(h, HPSA_INTR_OFF); | |
303932fd | 3680 | free_irq(h->intr[PERF_MODE_INT], h); |
edd16368 SC |
3681 | #ifdef CONFIG_PCI_MSI |
3682 | if (h->msix_vector) | |
3683 | pci_disable_msix(h->pdev); | |
3684 | else if (h->msi_vector) | |
3685 | pci_disable_msi(h->pdev); | |
3686 | #endif /* CONFIG_PCI_MSI */ | |
3687 | } | |
3688 | ||
3689 | static void __devexit hpsa_remove_one(struct pci_dev *pdev) | |
3690 | { | |
3691 | struct ctlr_info *h; | |
3692 | ||
3693 | if (pci_get_drvdata(pdev) == NULL) { | |
3694 | dev_err(&pdev->dev, "unable to remove device \n"); | |
3695 | return; | |
3696 | } | |
3697 | h = pci_get_drvdata(pdev); | |
3698 | mutex_lock(&h->busy_shutting_down); | |
3699 | remove_from_scan_list(h); | |
3700 | hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ | |
3701 | hpsa_shutdown(pdev); | |
3702 | iounmap(h->vaddr); | |
3703 | pci_free_consistent(h->pdev, | |
3704 | h->nr_cmds * sizeof(struct CommandList), | |
3705 | h->cmd_pool, h->cmd_pool_dhandle); | |
3706 | pci_free_consistent(h->pdev, | |
3707 | h->nr_cmds * sizeof(struct ErrorInfo), | |
3708 | h->errinfo_pool, h->errinfo_pool_dhandle); | |
303932fd DB |
3709 | pci_free_consistent(h->pdev, h->reply_pool_size, |
3710 | h->reply_pool, h->reply_pool_dhandle); | |
edd16368 | 3711 | kfree(h->cmd_pool_bits); |
303932fd | 3712 | kfree(h->blockFetchTable); |
339b2b14 | 3713 | kfree(h->hba_inquiry_data); |
edd16368 SC |
3714 | /* |
3715 | * Deliberately omit pci_disable_device(): it does something nasty to | |
3716 | * Smart Array controllers that pci_enable_device does not undo | |
3717 | */ | |
3718 | pci_release_regions(pdev); | |
3719 | pci_set_drvdata(pdev, NULL); | |
3720 | mutex_unlock(&h->busy_shutting_down); | |
3721 | kfree(h); | |
3722 | } | |
3723 | ||
3724 | static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, | |
3725 | __attribute__((unused)) pm_message_t state) | |
3726 | { | |
3727 | return -ENOSYS; | |
3728 | } | |
3729 | ||
3730 | static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) | |
3731 | { | |
3732 | return -ENOSYS; | |
3733 | } | |
3734 | ||
3735 | static struct pci_driver hpsa_pci_driver = { | |
3736 | .name = "hpsa", | |
3737 | .probe = hpsa_init_one, | |
3738 | .remove = __devexit_p(hpsa_remove_one), | |
3739 | .id_table = hpsa_pci_device_id, /* id_table */ | |
3740 | .shutdown = hpsa_shutdown, | |
3741 | .suspend = hpsa_suspend, | |
3742 | .resume = hpsa_resume, | |
3743 | }; | |
3744 | ||
303932fd DB |
3745 | /* Fill in bucket_map[], given nsgs (the max number of |
3746 | * scatter gather elements supported) and bucket[], | |
3747 | * which is an array of 8 integers. The bucket[] array | |
3748 | * contains 8 different DMA transfer sizes (in 16 | |
3749 | * byte increments) which the controller uses to fetch | |
3750 | * commands. This function fills in bucket_map[], which | |
3751 | * maps a given number of scatter gather elements to one of | |
3752 | * the 8 DMA transfer sizes. The point of it is to allow the | |
3753 | * controller to only do as much DMA as needed to fetch the | |
3754 | * command, with the DMA transfer size encoded in the lower | |
3755 | * bits of the command address. | |
3756 | */ | |
3757 | static void calc_bucket_map(int bucket[], int num_buckets, | |
3758 | int nsgs, int *bucket_map) | |
3759 | { | |
3760 | int i, j, b, size; | |
3761 | ||
3762 | /* even a command with 0 SGs requires 4 blocks */ | |
3763 | #define MINIMUM_TRANSFER_BLOCKS 4 | |
3764 | #define NUM_BUCKETS 8 | |
3765 | /* Note, bucket_map must have nsgs+1 entries. */ | |
3766 | for (i = 0; i <= nsgs; i++) { | |
3767 | /* Compute size of a command with i SG entries */ | |
3768 | size = i + MINIMUM_TRANSFER_BLOCKS; | |
3769 | b = num_buckets; /* Assume the biggest bucket */ | |
3770 | /* Find the bucket that is just big enough */ | |
3771 | for (j = 0; j < 8; j++) { | |
3772 | if (bucket[j] >= size) { | |
3773 | b = j; | |
3774 | break; | |
3775 | } | |
3776 | } | |
3777 | /* for a command with i SG entries, use bucket b. */ | |
3778 | bucket_map[i] = b; | |
3779 | } | |
3780 | } | |
3781 | ||
3782 | static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) | |
3783 | { | |
3784 | u32 trans_support; | |
3785 | u64 trans_offset; | |
3786 | /* 5 = 1 s/g entry or 4k | |
3787 | * 6 = 2 s/g entry or 8k | |
3788 | * 8 = 4 s/g entry or 16k | |
3789 | * 10 = 6 s/g entry or 24k | |
3790 | */ | |
3791 | int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */ | |
3792 | int i = 0; | |
3793 | int l = 0; | |
3794 | unsigned long register_value; | |
3795 | ||
3796 | trans_support = readl(&(h->cfgtable->TransportSupport)); | |
3797 | if (!(trans_support & PERFORMANT_MODE)) | |
3798 | return; | |
3799 | ||
3800 | h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); | |
3801 | h->max_sg_entries = 32; | |
3802 | /* Performant mode ring buffer and supporting data structures */ | |
3803 | h->reply_pool_size = h->max_commands * sizeof(u64); | |
3804 | h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size, | |
3805 | &(h->reply_pool_dhandle)); | |
3806 | ||
3807 | /* Need a block fetch table for performant mode */ | |
3808 | h->blockFetchTable = kmalloc(((h->max_sg_entries+1) * | |
3809 | sizeof(u32)), GFP_KERNEL); | |
3810 | ||
3811 | if ((h->reply_pool == NULL) | |
3812 | || (h->blockFetchTable == NULL)) | |
3813 | goto clean_up; | |
3814 | ||
3815 | h->reply_pool_wraparound = 1; /* spec: init to 1 */ | |
3816 | ||
3817 | /* Controller spec: zero out this buffer. */ | |
3818 | memset(h->reply_pool, 0, h->reply_pool_size); | |
3819 | h->reply_pool_head = h->reply_pool; | |
3820 | ||
3821 | trans_offset = readl(&(h->cfgtable->TransMethodOffset)); | |
3822 | bft[7] = h->max_sg_entries + 4; | |
3823 | calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable); | |
3824 | for (i = 0; i < 8; i++) | |
3825 | writel(bft[i], &h->transtable->BlockFetch[i]); | |
3826 | ||
3827 | /* size of controller ring buffer */ | |
3828 | writel(h->max_commands, &h->transtable->RepQSize); | |
3829 | writel(1, &h->transtable->RepQCount); | |
3830 | writel(0, &h->transtable->RepQCtrAddrLow32); | |
3831 | writel(0, &h->transtable->RepQCtrAddrHigh32); | |
3832 | writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32); | |
3833 | writel(0, &h->transtable->RepQAddr0High32); | |
3834 | writel(CFGTBL_Trans_Performant, | |
3835 | &(h->cfgtable->HostWrite.TransportRequest)); | |
3836 | writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); | |
3837 | /* under certain very rare conditions, this can take awhile. | |
3838 | * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right | |
3839 | * as we enter this code.) */ | |
3840 | for (l = 0; l < MAX_CONFIG_WAIT; l++) { | |
3841 | register_value = readl(h->vaddr + SA5_DOORBELL); | |
3842 | if (!(register_value & CFGTBL_ChangeReq)) | |
3843 | break; | |
3844 | /* delay and try again */ | |
3845 | set_current_state(TASK_INTERRUPTIBLE); | |
3846 | schedule_timeout(10); | |
3847 | } | |
3848 | register_value = readl(&(h->cfgtable->TransportActive)); | |
3849 | if (!(register_value & CFGTBL_Trans_Performant)) { | |
3850 | dev_warn(&h->pdev->dev, "unable to get board into" | |
3851 | " performant mode\n"); | |
3852 | return; | |
3853 | } | |
3854 | ||
3855 | /* Change the access methods to the performant access methods */ | |
3856 | h->access = SA5_performant_access; | |
3857 | h->transMethod = CFGTBL_Trans_Performant; | |
3858 | ||
3859 | return; | |
3860 | ||
3861 | clean_up: | |
3862 | if (h->reply_pool) | |
3863 | pci_free_consistent(h->pdev, h->reply_pool_size, | |
3864 | h->reply_pool, h->reply_pool_dhandle); | |
3865 | kfree(h->blockFetchTable); | |
3866 | } | |
3867 | ||
edd16368 SC |
3868 | /* |
3869 | * This is it. Register the PCI driver information for the cards we control | |
3870 | * the OS will call our registered routines when it finds one of our cards. | |
3871 | */ | |
3872 | static int __init hpsa_init(void) | |
3873 | { | |
3874 | int err; | |
3875 | /* Start the scan thread */ | |
3876 | hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan"); | |
3877 | if (IS_ERR(hpsa_scan_thread)) { | |
3878 | err = PTR_ERR(hpsa_scan_thread); | |
3879 | return -ENODEV; | |
3880 | } | |
3881 | err = pci_register_driver(&hpsa_pci_driver); | |
3882 | if (err) | |
3883 | kthread_stop(hpsa_scan_thread); | |
3884 | return err; | |
3885 | } | |
3886 | ||
3887 | static void __exit hpsa_cleanup(void) | |
3888 | { | |
3889 | pci_unregister_driver(&hpsa_pci_driver); | |
3890 | kthread_stop(hpsa_scan_thread); | |
3891 | } | |
3892 | ||
3893 | module_init(hpsa_init); | |
3894 | module_exit(hpsa_cleanup); |