]>
Commit | Line | Data |
---|---|---|
f92363d1 SR |
1 | /* |
2 | * SAS Transport Layer for MPT (Message Passing Technology) based controllers | |
3 | * | |
4 | * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c | |
a4ffce0d | 5 | * Copyright (C) 2012-2014 LSI Corporation |
a03bd153 SR |
6 | * Copyright (C) 2013-2014 Avago Technologies |
7 | * (mailto: MPT-FusionLinux.pdl@avagotech.com) | |
f92363d1 SR |
8 | * |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License | |
11 | * as published by the Free Software Foundation; either version 2 | |
12 | * of the License, or (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * NO WARRANTY | |
20 | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
21 | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
22 | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
23 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
24 | * solely responsible for determining the appropriateness of using and | |
25 | * distributing the Program and assumes all risks associated with its | |
26 | * exercise of rights under this Agreement, including but not limited to | |
27 | * the risks and costs of program errors, damage to or loss of data, | |
28 | * programs or equipment, and unavailability or interruption of operations. | |
29 | ||
30 | * DISCLAIMER OF LIABILITY | |
31 | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
32 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
33 | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
34 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
35 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
36 | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
37 | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
38 | ||
39 | * You should have received a copy of the GNU General Public License | |
40 | * along with this program; if not, write to the Free Software | |
41 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, | |
42 | * USA. | |
43 | */ | |
44 | ||
45 | #include <linux/module.h> | |
46 | #include <linux/kernel.h> | |
47 | #include <linux/init.h> | |
48 | #include <linux/errno.h> | |
49 | #include <linux/sched.h> | |
50 | #include <linux/workqueue.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/pci.h> | |
53 | ||
54 | #include <scsi/scsi.h> | |
55 | #include <scsi/scsi_cmnd.h> | |
56 | #include <scsi/scsi_device.h> | |
57 | #include <scsi/scsi_host.h> | |
58 | #include <scsi/scsi_transport_sas.h> | |
59 | #include <scsi/scsi_dbg.h> | |
60 | ||
61 | #include "mpt3sas_base.h" | |
62 | ||
63 | /** | |
64 | * _transport_sas_node_find_by_sas_address - sas node search | |
65 | * @ioc: per adapter object | |
66 | * @sas_address: sas address of expander or sas host | |
67 | * Context: Calling function should acquire ioc->sas_node_lock. | |
68 | * | |
69 | * Search for either hba phys or expander device based on handle, then returns | |
70 | * the sas_node object. | |
71 | */ | |
72 | static struct _sas_node * | |
73 | _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, | |
74 | u64 sas_address) | |
75 | { | |
76 | if (ioc->sas_hba.sas_address == sas_address) | |
77 | return &ioc->sas_hba; | |
78 | else | |
79 | return mpt3sas_scsih_expander_find_by_sas_address(ioc, | |
80 | sas_address); | |
81 | } | |
82 | ||
83 | /** | |
84 | * _transport_convert_phy_link_rate - | |
85 | * @link_rate: link rate returned from mpt firmware | |
86 | * | |
87 | * Convert link_rate from mpi fusion into sas_transport form. | |
88 | */ | |
89 | static enum sas_linkrate | |
90 | _transport_convert_phy_link_rate(u8 link_rate) | |
91 | { | |
92 | enum sas_linkrate rc; | |
93 | ||
94 | switch (link_rate) { | |
95 | case MPI2_SAS_NEG_LINK_RATE_1_5: | |
96 | rc = SAS_LINK_RATE_1_5_GBPS; | |
97 | break; | |
98 | case MPI2_SAS_NEG_LINK_RATE_3_0: | |
99 | rc = SAS_LINK_RATE_3_0_GBPS; | |
100 | break; | |
101 | case MPI2_SAS_NEG_LINK_RATE_6_0: | |
102 | rc = SAS_LINK_RATE_6_0_GBPS; | |
103 | break; | |
104 | case MPI25_SAS_NEG_LINK_RATE_12_0: | |
105 | rc = SAS_LINK_RATE_12_0_GBPS; | |
106 | break; | |
107 | case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: | |
108 | rc = SAS_PHY_DISABLED; | |
109 | break; | |
110 | case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: | |
111 | rc = SAS_LINK_RATE_FAILED; | |
112 | break; | |
113 | case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: | |
114 | rc = SAS_SATA_PORT_SELECTOR; | |
115 | break; | |
116 | case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: | |
117 | rc = SAS_PHY_RESET_IN_PROGRESS; | |
118 | break; | |
119 | ||
120 | default: | |
121 | case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: | |
122 | case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: | |
123 | rc = SAS_LINK_RATE_UNKNOWN; | |
124 | break; | |
125 | } | |
126 | return rc; | |
127 | } | |
128 | ||
129 | /** | |
130 | * _transport_set_identify - set identify for phys and end devices | |
131 | * @ioc: per adapter object | |
132 | * @handle: device handle | |
133 | * @identify: sas identify info | |
134 | * | |
135 | * Populates sas identify info. | |
136 | * | |
137 | * Returns 0 for success, non-zero for failure. | |
138 | */ | |
139 | static int | |
140 | _transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle, | |
141 | struct sas_identify *identify) | |
142 | { | |
143 | Mpi2SasDevicePage0_t sas_device_pg0; | |
144 | Mpi2ConfigReply_t mpi_reply; | |
145 | u32 device_info; | |
146 | u32 ioc_status; | |
147 | ||
148 | if (ioc->shost_recovery || ioc->pci_error_recovery) { | |
149 | pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", | |
150 | __func__, ioc->name); | |
151 | return -EFAULT; | |
152 | } | |
153 | ||
154 | if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
155 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { | |
156 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
157 | ioc->name, __FILE__, __LINE__, __func__); | |
158 | return -ENXIO; | |
159 | } | |
160 | ||
161 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
162 | MPI2_IOCSTATUS_MASK; | |
163 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
164 | pr_err(MPT3SAS_FMT | |
165 | "handle(0x%04x), ioc_status(0x%04x)\nfailure at %s:%d/%s()!\n", | |
166 | ioc->name, handle, ioc_status, | |
167 | __FILE__, __LINE__, __func__); | |
168 | return -EIO; | |
169 | } | |
170 | ||
171 | memset(identify, 0, sizeof(struct sas_identify)); | |
172 | device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); | |
173 | ||
174 | /* sas_address */ | |
175 | identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); | |
176 | ||
177 | /* phy number of the parent device this device is linked to */ | |
178 | identify->phy_identifier = sas_device_pg0.PhyNum; | |
179 | ||
180 | /* device_type */ | |
181 | switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { | |
182 | case MPI2_SAS_DEVICE_INFO_NO_DEVICE: | |
183 | identify->device_type = SAS_PHY_UNUSED; | |
184 | break; | |
185 | case MPI2_SAS_DEVICE_INFO_END_DEVICE: | |
186 | identify->device_type = SAS_END_DEVICE; | |
187 | break; | |
188 | case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: | |
189 | identify->device_type = SAS_EDGE_EXPANDER_DEVICE; | |
190 | break; | |
191 | case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: | |
192 | identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; | |
193 | break; | |
194 | } | |
195 | ||
196 | /* initiator_port_protocols */ | |
197 | if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) | |
198 | identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; | |
199 | if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) | |
200 | identify->initiator_port_protocols |= SAS_PROTOCOL_STP; | |
201 | if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) | |
202 | identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; | |
203 | if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) | |
204 | identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; | |
205 | ||
206 | /* target_port_protocols */ | |
207 | if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | |
208 | identify->target_port_protocols |= SAS_PROTOCOL_SSP; | |
209 | if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | |
210 | identify->target_port_protocols |= SAS_PROTOCOL_STP; | |
211 | if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) | |
212 | identify->target_port_protocols |= SAS_PROTOCOL_SMP; | |
213 | if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) | |
214 | identify->target_port_protocols |= SAS_PROTOCOL_SATA; | |
215 | ||
216 | return 0; | |
217 | } | |
218 | ||
219 | /** | |
220 | * mpt3sas_transport_done - internal transport layer callback handler. | |
221 | * @ioc: per adapter object | |
222 | * @smid: system request message index | |
223 | * @msix_index: MSIX table index supplied by the OS | |
224 | * @reply: reply message frame(lower 32bit addr) | |
225 | * | |
226 | * Callback handler when sending internal generated transport cmds. | |
227 | * The callback index passed is `ioc->transport_cb_idx` | |
228 | * | |
229 | * Return 1 meaning mf should be freed from _base_interrupt | |
230 | * 0 means the mf is freed from this function. | |
231 | */ | |
232 | u8 | |
233 | mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, | |
234 | u32 reply) | |
235 | { | |
236 | MPI2DefaultReply_t *mpi_reply; | |
237 | ||
238 | mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); | |
239 | if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED) | |
240 | return 1; | |
241 | if (ioc->transport_cmds.smid != smid) | |
242 | return 1; | |
243 | ioc->transport_cmds.status |= MPT3_CMD_COMPLETE; | |
244 | if (mpi_reply) { | |
245 | memcpy(ioc->transport_cmds.reply, mpi_reply, | |
246 | mpi_reply->MsgLength*4); | |
247 | ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID; | |
248 | } | |
249 | ioc->transport_cmds.status &= ~MPT3_CMD_PENDING; | |
250 | complete(&ioc->transport_cmds.done); | |
251 | return 1; | |
252 | } | |
253 | ||
254 | /* report manufacture request structure */ | |
255 | struct rep_manu_request { | |
256 | u8 smp_frame_type; | |
257 | u8 function; | |
258 | u8 reserved; | |
259 | u8 request_length; | |
260 | }; | |
261 | ||
262 | /* report manufacture reply structure */ | |
263 | struct rep_manu_reply { | |
264 | u8 smp_frame_type; /* 0x41 */ | |
265 | u8 function; /* 0x01 */ | |
266 | u8 function_result; | |
267 | u8 response_length; | |
268 | u16 expander_change_count; | |
269 | u8 reserved0[2]; | |
270 | u8 sas_format; | |
271 | u8 reserved2[3]; | |
272 | u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; | |
273 | u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; | |
274 | u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; | |
275 | u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; | |
276 | u16 component_id; | |
277 | u8 component_revision_id; | |
278 | u8 reserved3; | |
279 | u8 vendor_specific[8]; | |
280 | }; | |
281 | ||
282 | /** | |
283 | * transport_expander_report_manufacture - obtain SMP report_manufacture | |
284 | * @ioc: per adapter object | |
285 | * @sas_address: expander sas address | |
286 | * @edev: the sas_expander_device object | |
287 | * | |
288 | * Fills in the sas_expander_device object when SMP port is created. | |
289 | * | |
290 | * Returns 0 for success, non-zero for failure. | |
291 | */ | |
292 | static int | |
293 | _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, | |
294 | u64 sas_address, struct sas_expander_device *edev) | |
295 | { | |
296 | Mpi2SmpPassthroughRequest_t *mpi_request; | |
297 | Mpi2SmpPassthroughReply_t *mpi_reply; | |
298 | struct rep_manu_reply *manufacture_reply; | |
299 | struct rep_manu_request *manufacture_request; | |
300 | int rc; | |
301 | u16 smid; | |
302 | u32 ioc_state; | |
303 | unsigned long timeleft; | |
304 | void *psge; | |
305 | u8 issue_reset = 0; | |
306 | void *data_out = NULL; | |
307 | dma_addr_t data_out_dma; | |
308 | dma_addr_t data_in_dma; | |
309 | size_t data_in_sz; | |
310 | size_t data_out_sz; | |
311 | u16 wait_state_count; | |
312 | ||
313 | if (ioc->shost_recovery || ioc->pci_error_recovery) { | |
314 | pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", | |
315 | __func__, ioc->name); | |
316 | return -EFAULT; | |
317 | } | |
318 | ||
319 | mutex_lock(&ioc->transport_cmds.mutex); | |
320 | ||
321 | if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { | |
322 | pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", | |
323 | ioc->name, __func__); | |
324 | rc = -EAGAIN; | |
325 | goto out; | |
326 | } | |
327 | ioc->transport_cmds.status = MPT3_CMD_PENDING; | |
328 | ||
329 | wait_state_count = 0; | |
330 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
331 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
332 | if (wait_state_count++ == 10) { | |
333 | pr_err(MPT3SAS_FMT | |
334 | "%s: failed due to ioc not operational\n", | |
335 | ioc->name, __func__); | |
336 | rc = -EFAULT; | |
337 | goto out; | |
338 | } | |
339 | ssleep(1); | |
340 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
341 | pr_info(MPT3SAS_FMT | |
342 | "%s: waiting for operational state(count=%d)\n", | |
343 | ioc->name, __func__, wait_state_count); | |
344 | } | |
345 | if (wait_state_count) | |
346 | pr_info(MPT3SAS_FMT "%s: ioc is operational\n", | |
347 | ioc->name, __func__); | |
348 | ||
349 | smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); | |
350 | if (!smid) { | |
351 | pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", | |
352 | ioc->name, __func__); | |
353 | rc = -EAGAIN; | |
354 | goto out; | |
355 | } | |
356 | ||
357 | rc = 0; | |
358 | mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); | |
359 | ioc->transport_cmds.smid = smid; | |
360 | ||
361 | data_out_sz = sizeof(struct rep_manu_request); | |
362 | data_in_sz = sizeof(struct rep_manu_reply); | |
363 | data_out = pci_alloc_consistent(ioc->pdev, data_out_sz + data_in_sz, | |
364 | &data_out_dma); | |
365 | ||
366 | if (!data_out) { | |
367 | pr_err("failure at %s:%d/%s()!\n", __FILE__, | |
368 | __LINE__, __func__); | |
369 | rc = -ENOMEM; | |
370 | mpt3sas_base_free_smid(ioc, smid); | |
371 | goto out; | |
372 | } | |
373 | ||
374 | data_in_dma = data_out_dma + sizeof(struct rep_manu_request); | |
375 | ||
376 | manufacture_request = data_out; | |
377 | manufacture_request->smp_frame_type = 0x40; | |
378 | manufacture_request->function = 1; | |
379 | manufacture_request->reserved = 0; | |
380 | manufacture_request->request_length = 0; | |
381 | ||
382 | memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); | |
383 | mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; | |
384 | mpi_request->PhysicalPort = 0xFF; | |
385 | mpi_request->SASAddress = cpu_to_le64(sas_address); | |
386 | mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); | |
387 | psge = &mpi_request->SGL; | |
388 | ||
389 | ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, | |
390 | data_in_sz); | |
391 | ||
392 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
393 | "report_manufacture - send to sas_addr(0x%016llx)\n", | |
394 | ioc->name, (unsigned long long)sas_address)); | |
395 | init_completion(&ioc->transport_cmds.done); | |
396 | mpt3sas_base_put_smid_default(ioc, smid); | |
397 | timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, | |
398 | 10*HZ); | |
399 | ||
400 | if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { | |
401 | pr_err(MPT3SAS_FMT "%s: timeout\n", | |
402 | ioc->name, __func__); | |
403 | _debug_dump_mf(mpi_request, | |
404 | sizeof(Mpi2SmpPassthroughRequest_t)/4); | |
405 | if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) | |
406 | issue_reset = 1; | |
407 | goto issue_host_reset; | |
408 | } | |
409 | ||
410 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
411 | "report_manufacture - complete\n", ioc->name)); | |
412 | ||
413 | if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { | |
414 | u8 *tmp; | |
415 | ||
416 | mpi_reply = ioc->transport_cmds.reply; | |
417 | ||
418 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
419 | "report_manufacture - reply data transfer size(%d)\n", | |
420 | ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); | |
421 | ||
422 | if (le16_to_cpu(mpi_reply->ResponseDataLength) != | |
423 | sizeof(struct rep_manu_reply)) | |
424 | goto out; | |
425 | ||
426 | manufacture_reply = data_out + sizeof(struct rep_manu_request); | |
427 | strncpy(edev->vendor_id, manufacture_reply->vendor_id, | |
428 | SAS_EXPANDER_VENDOR_ID_LEN); | |
429 | strncpy(edev->product_id, manufacture_reply->product_id, | |
430 | SAS_EXPANDER_PRODUCT_ID_LEN); | |
431 | strncpy(edev->product_rev, manufacture_reply->product_rev, | |
432 | SAS_EXPANDER_PRODUCT_REV_LEN); | |
433 | edev->level = manufacture_reply->sas_format & 1; | |
434 | if (edev->level) { | |
435 | strncpy(edev->component_vendor_id, | |
436 | manufacture_reply->component_vendor_id, | |
437 | SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); | |
438 | tmp = (u8 *)&manufacture_reply->component_id; | |
439 | edev->component_id = tmp[0] << 8 | tmp[1]; | |
440 | edev->component_revision_id = | |
441 | manufacture_reply->component_revision_id; | |
442 | } | |
443 | } else | |
444 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
445 | "report_manufacture - no reply\n", ioc->name)); | |
446 | ||
447 | issue_host_reset: | |
448 | if (issue_reset) | |
449 | mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
450 | FORCE_BIG_HAMMER); | |
451 | out: | |
452 | ioc->transport_cmds.status = MPT3_CMD_NOT_USED; | |
453 | if (data_out) | |
454 | pci_free_consistent(ioc->pdev, data_out_sz + data_in_sz, | |
455 | data_out, data_out_dma); | |
456 | ||
457 | mutex_unlock(&ioc->transport_cmds.mutex); | |
458 | return rc; | |
459 | } | |
460 | ||
461 | ||
462 | /** | |
463 | * _transport_delete_port - helper function to removing a port | |
464 | * @ioc: per adapter object | |
465 | * @mpt3sas_port: mpt3sas per port object | |
466 | * | |
467 | * Returns nothing. | |
468 | */ | |
469 | static void | |
470 | _transport_delete_port(struct MPT3SAS_ADAPTER *ioc, | |
471 | struct _sas_port *mpt3sas_port) | |
472 | { | |
473 | u64 sas_address = mpt3sas_port->remote_identify.sas_address; | |
474 | enum sas_device_type device_type = | |
475 | mpt3sas_port->remote_identify.device_type; | |
476 | ||
477 | dev_printk(KERN_INFO, &mpt3sas_port->port->dev, | |
478 | "remove: sas_addr(0x%016llx)\n", | |
479 | (unsigned long long) sas_address); | |
480 | ||
481 | ioc->logging_level |= MPT_DEBUG_TRANSPORT; | |
482 | if (device_type == SAS_END_DEVICE) | |
483 | mpt3sas_device_remove_by_sas_address(ioc, sas_address); | |
484 | else if (device_type == SAS_EDGE_EXPANDER_DEVICE || | |
485 | device_type == SAS_FANOUT_EXPANDER_DEVICE) | |
486 | mpt3sas_expander_remove(ioc, sas_address); | |
487 | ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; | |
488 | } | |
489 | ||
490 | /** | |
491 | * _transport_delete_phy - helper function to removing single phy from port | |
492 | * @ioc: per adapter object | |
493 | * @mpt3sas_port: mpt3sas per port object | |
494 | * @mpt3sas_phy: mpt3sas per phy object | |
495 | * | |
496 | * Returns nothing. | |
497 | */ | |
498 | static void | |
499 | _transport_delete_phy(struct MPT3SAS_ADAPTER *ioc, | |
500 | struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy) | |
501 | { | |
502 | u64 sas_address = mpt3sas_port->remote_identify.sas_address; | |
503 | ||
504 | dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, | |
505 | "remove: sas_addr(0x%016llx), phy(%d)\n", | |
506 | (unsigned long long) sas_address, mpt3sas_phy->phy_id); | |
507 | ||
508 | list_del(&mpt3sas_phy->port_siblings); | |
509 | mpt3sas_port->num_phys--; | |
510 | sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); | |
511 | mpt3sas_phy->phy_belongs_to_port = 0; | |
512 | } | |
513 | ||
514 | /** | |
515 | * _transport_add_phy - helper function to adding single phy to port | |
516 | * @ioc: per adapter object | |
517 | * @mpt3sas_port: mpt3sas per port object | |
518 | * @mpt3sas_phy: mpt3sas per phy object | |
519 | * | |
520 | * Returns nothing. | |
521 | */ | |
522 | static void | |
523 | _transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, | |
524 | struct _sas_phy *mpt3sas_phy) | |
525 | { | |
526 | u64 sas_address = mpt3sas_port->remote_identify.sas_address; | |
527 | ||
528 | dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, | |
529 | "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) | |
530 | sas_address, mpt3sas_phy->phy_id); | |
531 | ||
532 | list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list); | |
533 | mpt3sas_port->num_phys++; | |
534 | sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy); | |
535 | mpt3sas_phy->phy_belongs_to_port = 1; | |
536 | } | |
537 | ||
538 | /** | |
539 | * _transport_add_phy_to_an_existing_port - adding new phy to existing port | |
540 | * @ioc: per adapter object | |
541 | * @sas_node: sas node object (either expander or sas host) | |
542 | * @mpt3sas_phy: mpt3sas per phy object | |
543 | * @sas_address: sas address of device/expander were phy needs to be added to | |
544 | * | |
545 | * Returns nothing. | |
546 | */ | |
547 | static void | |
548 | _transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, | |
549 | struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, | |
550 | u64 sas_address) | |
551 | { | |
552 | struct _sas_port *mpt3sas_port; | |
553 | struct _sas_phy *phy_srch; | |
554 | ||
555 | if (mpt3sas_phy->phy_belongs_to_port == 1) | |
556 | return; | |
557 | ||
558 | list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, | |
559 | port_list) { | |
560 | if (mpt3sas_port->remote_identify.sas_address != | |
561 | sas_address) | |
562 | continue; | |
563 | list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, | |
564 | port_siblings) { | |
565 | if (phy_srch == mpt3sas_phy) | |
566 | return; | |
567 | } | |
568 | _transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy); | |
569 | return; | |
570 | } | |
571 | ||
572 | } | |
573 | ||
574 | /** | |
575 | * _transport_del_phy_from_an_existing_port - delete phy from existing port | |
576 | * @ioc: per adapter object | |
577 | * @sas_node: sas node object (either expander or sas host) | |
578 | * @mpt3sas_phy: mpt3sas per phy object | |
579 | * | |
580 | * Returns nothing. | |
581 | */ | |
582 | static void | |
583 | _transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, | |
584 | struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) | |
585 | { | |
586 | struct _sas_port *mpt3sas_port, *next; | |
587 | struct _sas_phy *phy_srch; | |
588 | ||
589 | if (mpt3sas_phy->phy_belongs_to_port == 0) | |
590 | return; | |
591 | ||
592 | list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, | |
593 | port_list) { | |
594 | list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, | |
595 | port_siblings) { | |
596 | if (phy_srch != mpt3sas_phy) | |
597 | continue; | |
598 | ||
599 | if (mpt3sas_port->num_phys == 1) | |
600 | _transport_delete_port(ioc, mpt3sas_port); | |
601 | else | |
602 | _transport_delete_phy(ioc, mpt3sas_port, | |
603 | mpt3sas_phy); | |
604 | return; | |
605 | } | |
606 | } | |
607 | } | |
608 | ||
609 | /** | |
610 | * _transport_sanity_check - sanity check when adding a new port | |
611 | * @ioc: per adapter object | |
612 | * @sas_node: sas node object (either expander or sas host) | |
613 | * @sas_address: sas address of device being added | |
614 | * | |
615 | * See the explanation above from _transport_delete_duplicate_port | |
616 | */ | |
617 | static void | |
618 | _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, | |
619 | u64 sas_address) | |
620 | { | |
621 | int i; | |
622 | ||
623 | for (i = 0; i < sas_node->num_phys; i++) { | |
624 | if (sas_node->phy[i].remote_identify.sas_address != sas_address) | |
625 | continue; | |
626 | if (sas_node->phy[i].phy_belongs_to_port == 1) | |
627 | _transport_del_phy_from_an_existing_port(ioc, sas_node, | |
628 | &sas_node->phy[i]); | |
629 | } | |
630 | } | |
631 | ||
632 | /** | |
633 | * mpt3sas_transport_port_add - insert port to the list | |
634 | * @ioc: per adapter object | |
635 | * @handle: handle of attached device | |
636 | * @sas_address: sas address of parent expander or sas host | |
637 | * Context: This function will acquire ioc->sas_node_lock. | |
638 | * | |
639 | * Adding new port object to the sas_node->sas_port_list. | |
640 | * | |
641 | * Returns mpt3sas_port. | |
642 | */ | |
643 | struct _sas_port * | |
644 | mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, | |
645 | u64 sas_address) | |
646 | { | |
647 | struct _sas_phy *mpt3sas_phy, *next; | |
648 | struct _sas_port *mpt3sas_port; | |
649 | unsigned long flags; | |
650 | struct _sas_node *sas_node; | |
651 | struct sas_rphy *rphy; | |
e4bc7f5c | 652 | struct _sas_device *sas_device = NULL; |
f92363d1 SR |
653 | int i; |
654 | struct sas_port *port; | |
655 | ||
656 | mpt3sas_port = kzalloc(sizeof(struct _sas_port), | |
657 | GFP_KERNEL); | |
658 | if (!mpt3sas_port) { | |
659 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
660 | ioc->name, __FILE__, __LINE__, __func__); | |
661 | return NULL; | |
662 | } | |
663 | ||
664 | INIT_LIST_HEAD(&mpt3sas_port->port_list); | |
665 | INIT_LIST_HEAD(&mpt3sas_port->phy_list); | |
666 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
667 | sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); | |
668 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
669 | ||
670 | if (!sas_node) { | |
671 | pr_err(MPT3SAS_FMT | |
672 | "%s: Could not find parent sas_address(0x%016llx)!\n", | |
673 | ioc->name, __func__, (unsigned long long)sas_address); | |
674 | goto out_fail; | |
675 | } | |
676 | ||
677 | if ((_transport_set_identify(ioc, handle, | |
678 | &mpt3sas_port->remote_identify))) { | |
679 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
680 | ioc->name, __FILE__, __LINE__, __func__); | |
681 | goto out_fail; | |
682 | } | |
683 | ||
684 | if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { | |
685 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
686 | ioc->name, __FILE__, __LINE__, __func__); | |
687 | goto out_fail; | |
688 | } | |
689 | ||
690 | _transport_sanity_check(ioc, sas_node, | |
691 | mpt3sas_port->remote_identify.sas_address); | |
692 | ||
693 | for (i = 0; i < sas_node->num_phys; i++) { | |
694 | if (sas_node->phy[i].remote_identify.sas_address != | |
695 | mpt3sas_port->remote_identify.sas_address) | |
696 | continue; | |
697 | list_add_tail(&sas_node->phy[i].port_siblings, | |
698 | &mpt3sas_port->phy_list); | |
699 | mpt3sas_port->num_phys++; | |
700 | } | |
701 | ||
702 | if (!mpt3sas_port->num_phys) { | |
703 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
704 | ioc->name, __FILE__, __LINE__, __func__); | |
705 | goto out_fail; | |
706 | } | |
707 | ||
708 | port = sas_port_alloc_num(sas_node->parent_dev); | |
709 | if ((sas_port_add(port))) { | |
710 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
711 | ioc->name, __FILE__, __LINE__, __func__); | |
712 | goto out_fail; | |
713 | } | |
714 | ||
715 | list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list, | |
716 | port_siblings) { | |
717 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) | |
718 | dev_printk(KERN_INFO, &port->dev, | |
719 | "add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n", | |
720 | handle, (unsigned long long) | |
721 | mpt3sas_port->remote_identify.sas_address, | |
722 | mpt3sas_phy->phy_id); | |
723 | sas_port_add_phy(port, mpt3sas_phy->phy); | |
724 | mpt3sas_phy->phy_belongs_to_port = 1; | |
725 | } | |
726 | ||
727 | mpt3sas_port->port = port; | |
728 | if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) | |
729 | rphy = sas_end_device_alloc(port); | |
730 | else | |
731 | rphy = sas_expander_alloc(port, | |
732 | mpt3sas_port->remote_identify.device_type); | |
733 | ||
734 | rphy->identify = mpt3sas_port->remote_identify; | |
e4bc7f5c SR |
735 | |
736 | if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { | |
737 | sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, | |
738 | mpt3sas_port->remote_identify.sas_address); | |
739 | if (!sas_device) { | |
740 | dfailprintk(ioc, printk(MPT3SAS_FMT | |
741 | "failure at %s:%d/%s()!\n", | |
742 | ioc->name, __FILE__, __LINE__, __func__)); | |
743 | goto out_fail; | |
744 | } | |
745 | sas_device->pend_sas_rphy_add = 1; | |
746 | } | |
747 | ||
f92363d1 SR |
748 | if ((sas_rphy_add(rphy))) { |
749 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
750 | ioc->name, __FILE__, __LINE__, __func__); | |
751 | } | |
e4bc7f5c SR |
752 | |
753 | if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) | |
754 | sas_device->pend_sas_rphy_add = 0; | |
755 | ||
f92363d1 SR |
756 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) |
757 | dev_printk(KERN_INFO, &rphy->dev, | |
758 | "add: handle(0x%04x), sas_addr(0x%016llx)\n", | |
759 | handle, (unsigned long long) | |
760 | mpt3sas_port->remote_identify.sas_address); | |
761 | mpt3sas_port->rphy = rphy; | |
762 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
763 | list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list); | |
764 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
765 | ||
766 | /* fill in report manufacture */ | |
767 | if (mpt3sas_port->remote_identify.device_type == | |
768 | MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || | |
769 | mpt3sas_port->remote_identify.device_type == | |
770 | MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) | |
771 | _transport_expander_report_manufacture(ioc, | |
772 | mpt3sas_port->remote_identify.sas_address, | |
773 | rphy_to_expander_device(rphy)); | |
774 | return mpt3sas_port; | |
775 | ||
776 | out_fail: | |
777 | list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, | |
778 | port_siblings) | |
779 | list_del(&mpt3sas_phy->port_siblings); | |
780 | kfree(mpt3sas_port); | |
781 | return NULL; | |
782 | } | |
783 | ||
784 | /** | |
785 | * mpt3sas_transport_port_remove - remove port from the list | |
786 | * @ioc: per adapter object | |
787 | * @sas_address: sas address of attached device | |
788 | * @sas_address_parent: sas address of parent expander or sas host | |
789 | * Context: This function will acquire ioc->sas_node_lock. | |
790 | * | |
791 | * Removing object and freeing associated memory from the | |
792 | * ioc->sas_port_list. | |
793 | * | |
794 | * Return nothing. | |
795 | */ | |
796 | void | |
797 | mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, | |
798 | u64 sas_address_parent) | |
799 | { | |
800 | int i; | |
801 | unsigned long flags; | |
802 | struct _sas_port *mpt3sas_port, *next; | |
803 | struct _sas_node *sas_node; | |
804 | u8 found = 0; | |
805 | struct _sas_phy *mpt3sas_phy, *next_phy; | |
806 | ||
807 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
808 | sas_node = _transport_sas_node_find_by_sas_address(ioc, | |
809 | sas_address_parent); | |
810 | if (!sas_node) { | |
811 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
812 | return; | |
813 | } | |
814 | list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, | |
815 | port_list) { | |
816 | if (mpt3sas_port->remote_identify.sas_address != sas_address) | |
817 | continue; | |
818 | found = 1; | |
819 | list_del(&mpt3sas_port->port_list); | |
820 | goto out; | |
821 | } | |
822 | out: | |
823 | if (!found) { | |
824 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
825 | return; | |
826 | } | |
827 | ||
828 | for (i = 0; i < sas_node->num_phys; i++) { | |
829 | if (sas_node->phy[i].remote_identify.sas_address == sas_address) | |
830 | memset(&sas_node->phy[i].remote_identify, 0 , | |
831 | sizeof(struct sas_identify)); | |
832 | } | |
833 | ||
834 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
835 | ||
836 | list_for_each_entry_safe(mpt3sas_phy, next_phy, | |
837 | &mpt3sas_port->phy_list, port_siblings) { | |
838 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) | |
839 | dev_printk(KERN_INFO, &mpt3sas_port->port->dev, | |
840 | "remove: sas_addr(0x%016llx), phy(%d)\n", | |
841 | (unsigned long long) | |
842 | mpt3sas_port->remote_identify.sas_address, | |
843 | mpt3sas_phy->phy_id); | |
844 | mpt3sas_phy->phy_belongs_to_port = 0; | |
845 | sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); | |
846 | list_del(&mpt3sas_phy->port_siblings); | |
847 | } | |
848 | sas_port_delete(mpt3sas_port->port); | |
849 | kfree(mpt3sas_port); | |
850 | } | |
851 | ||
852 | /** | |
853 | * mpt3sas_transport_add_host_phy - report sas_host phy to transport | |
854 | * @ioc: per adapter object | |
855 | * @mpt3sas_phy: mpt3sas per phy object | |
856 | * @phy_pg0: sas phy page 0 | |
857 | * @parent_dev: parent device class object | |
858 | * | |
859 | * Returns 0 for success, non-zero for failure. | |
860 | */ | |
861 | int | |
862 | mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy | |
863 | *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) | |
864 | { | |
865 | struct sas_phy *phy; | |
866 | int phy_index = mpt3sas_phy->phy_id; | |
867 | ||
868 | ||
869 | INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); | |
870 | phy = sas_phy_alloc(parent_dev, phy_index); | |
871 | if (!phy) { | |
872 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
873 | ioc->name, __FILE__, __LINE__, __func__); | |
874 | return -1; | |
875 | } | |
876 | if ((_transport_set_identify(ioc, mpt3sas_phy->handle, | |
877 | &mpt3sas_phy->identify))) { | |
878 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
879 | ioc->name, __FILE__, __LINE__, __func__); | |
880 | sas_phy_free(phy); | |
881 | return -1; | |
882 | } | |
883 | phy->identify = mpt3sas_phy->identify; | |
884 | mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); | |
885 | if (mpt3sas_phy->attached_handle) | |
886 | _transport_set_identify(ioc, mpt3sas_phy->attached_handle, | |
887 | &mpt3sas_phy->remote_identify); | |
888 | phy->identify.phy_identifier = mpt3sas_phy->phy_id; | |
889 | phy->negotiated_linkrate = _transport_convert_phy_link_rate( | |
890 | phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); | |
891 | phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( | |
892 | phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); | |
893 | phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( | |
894 | phy_pg0.HwLinkRate >> 4); | |
895 | phy->minimum_linkrate = _transport_convert_phy_link_rate( | |
896 | phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); | |
897 | phy->maximum_linkrate = _transport_convert_phy_link_rate( | |
898 | phy_pg0.ProgrammedLinkRate >> 4); | |
899 | ||
900 | if ((sas_phy_add(phy))) { | |
901 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
902 | ioc->name, __FILE__, __LINE__, __func__); | |
903 | sas_phy_free(phy); | |
904 | return -1; | |
905 | } | |
906 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) | |
907 | dev_printk(KERN_INFO, &phy->dev, | |
908 | "add: handle(0x%04x), sas_addr(0x%016llx)\n" | |
909 | "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", | |
910 | mpt3sas_phy->handle, (unsigned long long) | |
911 | mpt3sas_phy->identify.sas_address, | |
912 | mpt3sas_phy->attached_handle, | |
913 | (unsigned long long) | |
914 | mpt3sas_phy->remote_identify.sas_address); | |
915 | mpt3sas_phy->phy = phy; | |
916 | return 0; | |
917 | } | |
918 | ||
919 | ||
920 | /** | |
921 | * mpt3sas_transport_add_expander_phy - report expander phy to transport | |
922 | * @ioc: per adapter object | |
923 | * @mpt3sas_phy: mpt3sas per phy object | |
924 | * @expander_pg1: expander page 1 | |
925 | * @parent_dev: parent device class object | |
926 | * | |
927 | * Returns 0 for success, non-zero for failure. | |
928 | */ | |
929 | int | |
930 | mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy | |
931 | *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, | |
932 | struct device *parent_dev) | |
933 | { | |
934 | struct sas_phy *phy; | |
935 | int phy_index = mpt3sas_phy->phy_id; | |
936 | ||
937 | INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); | |
938 | phy = sas_phy_alloc(parent_dev, phy_index); | |
939 | if (!phy) { | |
940 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
941 | ioc->name, __FILE__, __LINE__, __func__); | |
942 | return -1; | |
943 | } | |
944 | if ((_transport_set_identify(ioc, mpt3sas_phy->handle, | |
945 | &mpt3sas_phy->identify))) { | |
946 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
947 | ioc->name, __FILE__, __LINE__, __func__); | |
948 | sas_phy_free(phy); | |
949 | return -1; | |
950 | } | |
951 | phy->identify = mpt3sas_phy->identify; | |
952 | mpt3sas_phy->attached_handle = | |
953 | le16_to_cpu(expander_pg1.AttachedDevHandle); | |
954 | if (mpt3sas_phy->attached_handle) | |
955 | _transport_set_identify(ioc, mpt3sas_phy->attached_handle, | |
956 | &mpt3sas_phy->remote_identify); | |
957 | phy->identify.phy_identifier = mpt3sas_phy->phy_id; | |
958 | phy->negotiated_linkrate = _transport_convert_phy_link_rate( | |
959 | expander_pg1.NegotiatedLinkRate & | |
960 | MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); | |
961 | phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( | |
962 | expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); | |
963 | phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( | |
964 | expander_pg1.HwLinkRate >> 4); | |
965 | phy->minimum_linkrate = _transport_convert_phy_link_rate( | |
966 | expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); | |
967 | phy->maximum_linkrate = _transport_convert_phy_link_rate( | |
968 | expander_pg1.ProgrammedLinkRate >> 4); | |
969 | ||
970 | if ((sas_phy_add(phy))) { | |
971 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
972 | ioc->name, __FILE__, __LINE__, __func__); | |
973 | sas_phy_free(phy); | |
974 | return -1; | |
975 | } | |
976 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) | |
977 | dev_printk(KERN_INFO, &phy->dev, | |
978 | "add: handle(0x%04x), sas_addr(0x%016llx)\n" | |
979 | "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", | |
980 | mpt3sas_phy->handle, (unsigned long long) | |
981 | mpt3sas_phy->identify.sas_address, | |
982 | mpt3sas_phy->attached_handle, | |
983 | (unsigned long long) | |
984 | mpt3sas_phy->remote_identify.sas_address); | |
985 | mpt3sas_phy->phy = phy; | |
986 | return 0; | |
987 | } | |
988 | ||
989 | /** | |
990 | * mpt3sas_transport_update_links - refreshing phy link changes | |
991 | * @ioc: per adapter object | |
992 | * @sas_address: sas address of parent expander or sas host | |
993 | * @handle: attached device handle | |
994 | * @phy_numberv: phy number | |
995 | * @link_rate: new link rate | |
996 | * | |
997 | * Returns nothing. | |
998 | */ | |
999 | void | |
1000 | mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, | |
1001 | u64 sas_address, u16 handle, u8 phy_number, u8 link_rate) | |
1002 | { | |
1003 | unsigned long flags; | |
1004 | struct _sas_node *sas_node; | |
1005 | struct _sas_phy *mpt3sas_phy; | |
1006 | ||
1007 | if (ioc->shost_recovery || ioc->pci_error_recovery) | |
1008 | return; | |
1009 | ||
1010 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
1011 | sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); | |
1012 | if (!sas_node) { | |
1013 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1014 | return; | |
1015 | } | |
1016 | ||
1017 | mpt3sas_phy = &sas_node->phy[phy_number]; | |
1018 | mpt3sas_phy->attached_handle = handle; | |
1019 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1020 | if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { | |
1021 | _transport_set_identify(ioc, handle, | |
1022 | &mpt3sas_phy->remote_identify); | |
1023 | _transport_add_phy_to_an_existing_port(ioc, sas_node, | |
1024 | mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address); | |
2311ce4d | 1025 | } else |
f92363d1 SR |
1026 | memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct |
1027 | sas_identify)); | |
1028 | ||
1029 | if (mpt3sas_phy->phy) | |
1030 | mpt3sas_phy->phy->negotiated_linkrate = | |
1031 | _transport_convert_phy_link_rate(link_rate); | |
1032 | ||
1033 | if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) | |
1034 | dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, | |
1035 | "refresh: parent sas_addr(0x%016llx),\n" | |
1036 | "\tlink_rate(0x%02x), phy(%d)\n" | |
1037 | "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", | |
1038 | (unsigned long long)sas_address, | |
1039 | link_rate, phy_number, handle, (unsigned long long) | |
1040 | mpt3sas_phy->remote_identify.sas_address); | |
1041 | } | |
1042 | ||
1043 | static inline void * | |
1044 | phy_to_ioc(struct sas_phy *phy) | |
1045 | { | |
1046 | struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); | |
1047 | return shost_priv(shost); | |
1048 | } | |
1049 | ||
1050 | static inline void * | |
1051 | rphy_to_ioc(struct sas_rphy *rphy) | |
1052 | { | |
1053 | struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); | |
1054 | return shost_priv(shost); | |
1055 | } | |
1056 | ||
1057 | /* report phy error log structure */ | |
1058 | struct phy_error_log_request { | |
1059 | u8 smp_frame_type; /* 0x40 */ | |
1060 | u8 function; /* 0x11 */ | |
1061 | u8 allocated_response_length; | |
1062 | u8 request_length; /* 02 */ | |
1063 | u8 reserved_1[5]; | |
1064 | u8 phy_identifier; | |
1065 | u8 reserved_2[2]; | |
1066 | }; | |
1067 | ||
1068 | /* report phy error log reply structure */ | |
1069 | struct phy_error_log_reply { | |
1070 | u8 smp_frame_type; /* 0x41 */ | |
1071 | u8 function; /* 0x11 */ | |
1072 | u8 function_result; | |
1073 | u8 response_length; | |
1074 | __be16 expander_change_count; | |
1075 | u8 reserved_1[3]; | |
1076 | u8 phy_identifier; | |
1077 | u8 reserved_2[2]; | |
1078 | __be32 invalid_dword; | |
1079 | __be32 running_disparity_error; | |
1080 | __be32 loss_of_dword_sync; | |
1081 | __be32 phy_reset_problem; | |
1082 | }; | |
1083 | ||
1084 | /** | |
1085 | * _transport_get_expander_phy_error_log - return expander counters | |
1086 | * @ioc: per adapter object | |
1087 | * @phy: The sas phy object | |
1088 | * | |
1089 | * Returns 0 for success, non-zero for failure. | |
1090 | * | |
1091 | */ | |
1092 | static int | |
1093 | _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, | |
1094 | struct sas_phy *phy) | |
1095 | { | |
1096 | Mpi2SmpPassthroughRequest_t *mpi_request; | |
1097 | Mpi2SmpPassthroughReply_t *mpi_reply; | |
1098 | struct phy_error_log_request *phy_error_log_request; | |
1099 | struct phy_error_log_reply *phy_error_log_reply; | |
1100 | int rc; | |
1101 | u16 smid; | |
1102 | u32 ioc_state; | |
1103 | unsigned long timeleft; | |
1104 | void *psge; | |
1105 | u8 issue_reset = 0; | |
1106 | void *data_out = NULL; | |
1107 | dma_addr_t data_out_dma; | |
1108 | u32 sz; | |
1109 | u16 wait_state_count; | |
1110 | ||
1111 | if (ioc->shost_recovery || ioc->pci_error_recovery) { | |
1112 | pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", | |
1113 | __func__, ioc->name); | |
1114 | return -EFAULT; | |
1115 | } | |
1116 | ||
1117 | mutex_lock(&ioc->transport_cmds.mutex); | |
1118 | ||
1119 | if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { | |
1120 | pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", | |
1121 | ioc->name, __func__); | |
1122 | rc = -EAGAIN; | |
1123 | goto out; | |
1124 | } | |
1125 | ioc->transport_cmds.status = MPT3_CMD_PENDING; | |
1126 | ||
1127 | wait_state_count = 0; | |
1128 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
1129 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
1130 | if (wait_state_count++ == 10) { | |
1131 | pr_err(MPT3SAS_FMT | |
1132 | "%s: failed due to ioc not operational\n", | |
1133 | ioc->name, __func__); | |
1134 | rc = -EFAULT; | |
1135 | goto out; | |
1136 | } | |
1137 | ssleep(1); | |
1138 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
1139 | pr_info(MPT3SAS_FMT | |
1140 | "%s: waiting for operational state(count=%d)\n", | |
1141 | ioc->name, __func__, wait_state_count); | |
1142 | } | |
1143 | if (wait_state_count) | |
1144 | pr_info(MPT3SAS_FMT "%s: ioc is operational\n", | |
1145 | ioc->name, __func__); | |
1146 | ||
1147 | smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); | |
1148 | if (!smid) { | |
1149 | pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", | |
1150 | ioc->name, __func__); | |
1151 | rc = -EAGAIN; | |
1152 | goto out; | |
1153 | } | |
1154 | ||
1155 | mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); | |
1156 | ioc->transport_cmds.smid = smid; | |
1157 | ||
1158 | sz = sizeof(struct phy_error_log_request) + | |
1159 | sizeof(struct phy_error_log_reply); | |
1160 | data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); | |
1161 | if (!data_out) { | |
1162 | pr_err("failure at %s:%d/%s()!\n", __FILE__, | |
1163 | __LINE__, __func__); | |
1164 | rc = -ENOMEM; | |
1165 | mpt3sas_base_free_smid(ioc, smid); | |
1166 | goto out; | |
1167 | } | |
1168 | ||
1169 | rc = -EINVAL; | |
1170 | memset(data_out, 0, sz); | |
1171 | phy_error_log_request = data_out; | |
1172 | phy_error_log_request->smp_frame_type = 0x40; | |
1173 | phy_error_log_request->function = 0x11; | |
1174 | phy_error_log_request->request_length = 2; | |
1175 | phy_error_log_request->allocated_response_length = 0; | |
1176 | phy_error_log_request->phy_identifier = phy->number; | |
1177 | ||
1178 | memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); | |
1179 | mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; | |
1180 | mpi_request->PhysicalPort = 0xFF; | |
1181 | mpi_request->VF_ID = 0; /* TODO */ | |
1182 | mpi_request->VP_ID = 0; | |
1183 | mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); | |
1184 | mpi_request->RequestDataLength = | |
1185 | cpu_to_le16(sizeof(struct phy_error_log_request)); | |
1186 | psge = &mpi_request->SGL; | |
1187 | ||
1188 | ioc->build_sg(ioc, psge, data_out_dma, | |
1189 | sizeof(struct phy_error_log_request), | |
1190 | data_out_dma + sizeof(struct phy_error_log_request), | |
1191 | sizeof(struct phy_error_log_reply)); | |
1192 | ||
1193 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1194 | "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n", | |
1195 | ioc->name, (unsigned long long)phy->identify.sas_address, | |
1196 | phy->number)); | |
1197 | init_completion(&ioc->transport_cmds.done); | |
1198 | mpt3sas_base_put_smid_default(ioc, smid); | |
1199 | timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, | |
1200 | 10*HZ); | |
1201 | ||
1202 | if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { | |
1203 | pr_err(MPT3SAS_FMT "%s: timeout\n", | |
1204 | ioc->name, __func__); | |
1205 | _debug_dump_mf(mpi_request, | |
1206 | sizeof(Mpi2SmpPassthroughRequest_t)/4); | |
1207 | if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) | |
1208 | issue_reset = 1; | |
1209 | goto issue_host_reset; | |
1210 | } | |
1211 | ||
1212 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1213 | "phy_error_log - complete\n", ioc->name)); | |
1214 | ||
1215 | if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { | |
1216 | ||
1217 | mpi_reply = ioc->transport_cmds.reply; | |
1218 | ||
1219 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1220 | "phy_error_log - reply data transfer size(%d)\n", | |
1221 | ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); | |
1222 | ||
1223 | if (le16_to_cpu(mpi_reply->ResponseDataLength) != | |
1224 | sizeof(struct phy_error_log_reply)) | |
1225 | goto out; | |
1226 | ||
1227 | phy_error_log_reply = data_out + | |
1228 | sizeof(struct phy_error_log_request); | |
1229 | ||
1230 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1231 | "phy_error_log - function_result(%d)\n", | |
1232 | ioc->name, phy_error_log_reply->function_result)); | |
1233 | ||
1234 | phy->invalid_dword_count = | |
1235 | be32_to_cpu(phy_error_log_reply->invalid_dword); | |
1236 | phy->running_disparity_error_count = | |
1237 | be32_to_cpu(phy_error_log_reply->running_disparity_error); | |
1238 | phy->loss_of_dword_sync_count = | |
1239 | be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); | |
1240 | phy->phy_reset_problem_count = | |
1241 | be32_to_cpu(phy_error_log_reply->phy_reset_problem); | |
1242 | rc = 0; | |
1243 | } else | |
1244 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1245 | "phy_error_log - no reply\n", ioc->name)); | |
1246 | ||
1247 | issue_host_reset: | |
1248 | if (issue_reset) | |
1249 | mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
1250 | FORCE_BIG_HAMMER); | |
1251 | out: | |
1252 | ioc->transport_cmds.status = MPT3_CMD_NOT_USED; | |
1253 | if (data_out) | |
1254 | pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); | |
1255 | ||
1256 | mutex_unlock(&ioc->transport_cmds.mutex); | |
1257 | return rc; | |
1258 | } | |
1259 | ||
1260 | /** | |
1261 | * _transport_get_linkerrors - return phy counters for both hba and expanders | |
1262 | * @phy: The sas phy object | |
1263 | * | |
1264 | * Returns 0 for success, non-zero for failure. | |
1265 | * | |
1266 | */ | |
1267 | static int | |
1268 | _transport_get_linkerrors(struct sas_phy *phy) | |
1269 | { | |
1270 | struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); | |
1271 | unsigned long flags; | |
1272 | Mpi2ConfigReply_t mpi_reply; | |
1273 | Mpi2SasPhyPage1_t phy_pg1; | |
1274 | ||
1275 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
1276 | if (_transport_sas_node_find_by_sas_address(ioc, | |
1277 | phy->identify.sas_address) == NULL) { | |
1278 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1279 | return -EINVAL; | |
1280 | } | |
1281 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1282 | ||
1283 | if (phy->identify.sas_address != ioc->sas_hba.sas_address) | |
1284 | return _transport_get_expander_phy_error_log(ioc, phy); | |
1285 | ||
1286 | /* get hba phy error logs */ | |
1287 | if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, | |
1288 | phy->number))) { | |
1289 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1290 | ioc->name, __FILE__, __LINE__, __func__); | |
1291 | return -ENXIO; | |
1292 | } | |
1293 | ||
1294 | if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) | |
1295 | pr_info(MPT3SAS_FMT | |
1296 | "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n", | |
1297 | ioc->name, phy->number, | |
1298 | le16_to_cpu(mpi_reply.IOCStatus), | |
1299 | le32_to_cpu(mpi_reply.IOCLogInfo)); | |
1300 | ||
1301 | phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); | |
1302 | phy->running_disparity_error_count = | |
1303 | le32_to_cpu(phy_pg1.RunningDisparityErrorCount); | |
1304 | phy->loss_of_dword_sync_count = | |
1305 | le32_to_cpu(phy_pg1.LossDwordSynchCount); | |
1306 | phy->phy_reset_problem_count = | |
1307 | le32_to_cpu(phy_pg1.PhyResetProblemCount); | |
1308 | return 0; | |
1309 | } | |
1310 | ||
1311 | /** | |
1312 | * _transport_get_enclosure_identifier - | |
1313 | * @phy: The sas phy object | |
1314 | * | |
1315 | * Obtain the enclosure logical id for an expander. | |
1316 | * Returns 0 for success, non-zero for failure. | |
1317 | */ | |
1318 | static int | |
1319 | _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) | |
1320 | { | |
1321 | struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); | |
1322 | struct _sas_device *sas_device; | |
1323 | unsigned long flags; | |
1324 | int rc; | |
1325 | ||
1326 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1327 | sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, | |
1328 | rphy->identify.sas_address); | |
1329 | if (sas_device) { | |
1330 | *identifier = sas_device->enclosure_logical_id; | |
1331 | rc = 0; | |
1332 | } else { | |
1333 | *identifier = 0; | |
1334 | rc = -ENXIO; | |
1335 | } | |
1336 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
1337 | return rc; | |
1338 | } | |
1339 | ||
1340 | /** | |
1341 | * _transport_get_bay_identifier - | |
1342 | * @phy: The sas phy object | |
1343 | * | |
1344 | * Returns the slot id for a device that resides inside an enclosure. | |
1345 | */ | |
1346 | static int | |
1347 | _transport_get_bay_identifier(struct sas_rphy *rphy) | |
1348 | { | |
1349 | struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); | |
1350 | struct _sas_device *sas_device; | |
1351 | unsigned long flags; | |
1352 | int rc; | |
1353 | ||
1354 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1355 | sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, | |
1356 | rphy->identify.sas_address); | |
1357 | if (sas_device) | |
1358 | rc = sas_device->slot; | |
1359 | else | |
1360 | rc = -ENXIO; | |
1361 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
1362 | return rc; | |
1363 | } | |
1364 | ||
1365 | /* phy control request structure */ | |
1366 | struct phy_control_request { | |
1367 | u8 smp_frame_type; /* 0x40 */ | |
1368 | u8 function; /* 0x91 */ | |
1369 | u8 allocated_response_length; | |
1370 | u8 request_length; /* 0x09 */ | |
1371 | u16 expander_change_count; | |
1372 | u8 reserved_1[3]; | |
1373 | u8 phy_identifier; | |
1374 | u8 phy_operation; | |
1375 | u8 reserved_2[13]; | |
1376 | u64 attached_device_name; | |
1377 | u8 programmed_min_physical_link_rate; | |
1378 | u8 programmed_max_physical_link_rate; | |
1379 | u8 reserved_3[6]; | |
1380 | }; | |
1381 | ||
1382 | /* phy control reply structure */ | |
1383 | struct phy_control_reply { | |
1384 | u8 smp_frame_type; /* 0x41 */ | |
1385 | u8 function; /* 0x11 */ | |
1386 | u8 function_result; | |
1387 | u8 response_length; | |
1388 | }; | |
1389 | ||
1390 | #define SMP_PHY_CONTROL_LINK_RESET (0x01) | |
1391 | #define SMP_PHY_CONTROL_HARD_RESET (0x02) | |
1392 | #define SMP_PHY_CONTROL_DISABLE (0x03) | |
1393 | ||
1394 | /** | |
1395 | * _transport_expander_phy_control - expander phy control | |
1396 | * @ioc: per adapter object | |
1397 | * @phy: The sas phy object | |
1398 | * | |
1399 | * Returns 0 for success, non-zero for failure. | |
1400 | * | |
1401 | */ | |
1402 | static int | |
1403 | _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, | |
1404 | struct sas_phy *phy, u8 phy_operation) | |
1405 | { | |
1406 | Mpi2SmpPassthroughRequest_t *mpi_request; | |
1407 | Mpi2SmpPassthroughReply_t *mpi_reply; | |
1408 | struct phy_control_request *phy_control_request; | |
1409 | struct phy_control_reply *phy_control_reply; | |
1410 | int rc; | |
1411 | u16 smid; | |
1412 | u32 ioc_state; | |
1413 | unsigned long timeleft; | |
1414 | void *psge; | |
1415 | u32 sgl_flags; | |
1416 | u8 issue_reset = 0; | |
1417 | void *data_out = NULL; | |
1418 | dma_addr_t data_out_dma; | |
1419 | u32 sz; | |
1420 | u16 wait_state_count; | |
1421 | ||
1422 | if (ioc->shost_recovery || ioc->pci_error_recovery) { | |
1423 | pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", | |
1424 | __func__, ioc->name); | |
1425 | return -EFAULT; | |
1426 | } | |
1427 | ||
1428 | mutex_lock(&ioc->transport_cmds.mutex); | |
1429 | ||
1430 | if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { | |
1431 | pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", | |
1432 | ioc->name, __func__); | |
1433 | rc = -EAGAIN; | |
1434 | goto out; | |
1435 | } | |
1436 | ioc->transport_cmds.status = MPT3_CMD_PENDING; | |
1437 | ||
1438 | wait_state_count = 0; | |
1439 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
1440 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
1441 | if (wait_state_count++ == 10) { | |
1442 | pr_err(MPT3SAS_FMT | |
1443 | "%s: failed due to ioc not operational\n", | |
1444 | ioc->name, __func__); | |
1445 | rc = -EFAULT; | |
1446 | goto out; | |
1447 | } | |
1448 | ssleep(1); | |
1449 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
1450 | pr_info(MPT3SAS_FMT | |
1451 | "%s: waiting for operational state(count=%d)\n", | |
1452 | ioc->name, __func__, wait_state_count); | |
1453 | } | |
1454 | if (wait_state_count) | |
1455 | pr_info(MPT3SAS_FMT "%s: ioc is operational\n", | |
1456 | ioc->name, __func__); | |
1457 | ||
1458 | smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); | |
1459 | if (!smid) { | |
1460 | pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", | |
1461 | ioc->name, __func__); | |
1462 | rc = -EAGAIN; | |
1463 | goto out; | |
1464 | } | |
1465 | ||
1466 | mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); | |
1467 | ioc->transport_cmds.smid = smid; | |
1468 | ||
1469 | sz = sizeof(struct phy_control_request) + | |
1470 | sizeof(struct phy_control_reply); | |
1471 | data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); | |
1472 | if (!data_out) { | |
1473 | pr_err("failure at %s:%d/%s()!\n", __FILE__, | |
1474 | __LINE__, __func__); | |
1475 | rc = -ENOMEM; | |
1476 | mpt3sas_base_free_smid(ioc, smid); | |
1477 | goto out; | |
1478 | } | |
1479 | ||
1480 | rc = -EINVAL; | |
1481 | memset(data_out, 0, sz); | |
1482 | phy_control_request = data_out; | |
1483 | phy_control_request->smp_frame_type = 0x40; | |
1484 | phy_control_request->function = 0x91; | |
1485 | phy_control_request->request_length = 9; | |
1486 | phy_control_request->allocated_response_length = 0; | |
1487 | phy_control_request->phy_identifier = phy->number; | |
1488 | phy_control_request->phy_operation = phy_operation; | |
1489 | phy_control_request->programmed_min_physical_link_rate = | |
1490 | phy->minimum_linkrate << 4; | |
1491 | phy_control_request->programmed_max_physical_link_rate = | |
1492 | phy->maximum_linkrate << 4; | |
1493 | ||
1494 | memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); | |
1495 | mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; | |
1496 | mpi_request->PhysicalPort = 0xFF; | |
1497 | mpi_request->VF_ID = 0; /* TODO */ | |
1498 | mpi_request->VP_ID = 0; | |
1499 | mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); | |
1500 | mpi_request->RequestDataLength = | |
1501 | cpu_to_le16(sizeof(struct phy_error_log_request)); | |
1502 | psge = &mpi_request->SGL; | |
1503 | ||
1504 | /* WRITE sgel first */ | |
1505 | sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | | |
1506 | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); | |
1507 | sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; | |
1508 | ioc->base_add_sg_single(psge, sgl_flags | | |
1509 | sizeof(struct phy_control_request), data_out_dma); | |
1510 | ||
1511 | /* incr sgel */ | |
1512 | psge += ioc->sge_size; | |
1513 | ||
1514 | /* READ sgel last */ | |
1515 | sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | | |
1516 | MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | | |
1517 | MPI2_SGE_FLAGS_END_OF_LIST); | |
1518 | sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; | |
1519 | ioc->base_add_sg_single(psge, sgl_flags | | |
1520 | sizeof(struct phy_control_reply), data_out_dma + | |
1521 | sizeof(struct phy_control_request)); | |
1522 | ||
1523 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1524 | "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", | |
1525 | ioc->name, (unsigned long long)phy->identify.sas_address, | |
1526 | phy->number, phy_operation)); | |
1527 | init_completion(&ioc->transport_cmds.done); | |
1528 | mpt3sas_base_put_smid_default(ioc, smid); | |
1529 | timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, | |
1530 | 10*HZ); | |
1531 | ||
1532 | if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { | |
1533 | pr_err(MPT3SAS_FMT "%s: timeout\n", | |
1534 | ioc->name, __func__); | |
1535 | _debug_dump_mf(mpi_request, | |
1536 | sizeof(Mpi2SmpPassthroughRequest_t)/4); | |
1537 | if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) | |
1538 | issue_reset = 1; | |
1539 | goto issue_host_reset; | |
1540 | } | |
1541 | ||
1542 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1543 | "phy_control - complete\n", ioc->name)); | |
1544 | ||
1545 | if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { | |
1546 | ||
1547 | mpi_reply = ioc->transport_cmds.reply; | |
1548 | ||
1549 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1550 | "phy_control - reply data transfer size(%d)\n", | |
1551 | ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); | |
1552 | ||
1553 | if (le16_to_cpu(mpi_reply->ResponseDataLength) != | |
1554 | sizeof(struct phy_control_reply)) | |
1555 | goto out; | |
1556 | ||
1557 | phy_control_reply = data_out + | |
1558 | sizeof(struct phy_control_request); | |
1559 | ||
1560 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1561 | "phy_control - function_result(%d)\n", | |
1562 | ioc->name, phy_control_reply->function_result)); | |
1563 | ||
1564 | rc = 0; | |
1565 | } else | |
1566 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
1567 | "phy_control - no reply\n", ioc->name)); | |
1568 | ||
1569 | issue_host_reset: | |
1570 | if (issue_reset) | |
1571 | mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
1572 | FORCE_BIG_HAMMER); | |
1573 | out: | |
1574 | ioc->transport_cmds.status = MPT3_CMD_NOT_USED; | |
1575 | if (data_out) | |
1576 | pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); | |
1577 | ||
1578 | mutex_unlock(&ioc->transport_cmds.mutex); | |
1579 | return rc; | |
1580 | } | |
1581 | ||
1582 | /** | |
1583 | * _transport_phy_reset - | |
1584 | * @phy: The sas phy object | |
1585 | * @hard_reset: | |
1586 | * | |
1587 | * Returns 0 for success, non-zero for failure. | |
1588 | */ | |
1589 | static int | |
1590 | _transport_phy_reset(struct sas_phy *phy, int hard_reset) | |
1591 | { | |
1592 | struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); | |
1593 | Mpi2SasIoUnitControlReply_t mpi_reply; | |
1594 | Mpi2SasIoUnitControlRequest_t mpi_request; | |
1595 | unsigned long flags; | |
1596 | ||
1597 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
1598 | if (_transport_sas_node_find_by_sas_address(ioc, | |
1599 | phy->identify.sas_address) == NULL) { | |
1600 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1601 | return -EINVAL; | |
1602 | } | |
1603 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1604 | ||
1605 | /* handle expander phys */ | |
1606 | if (phy->identify.sas_address != ioc->sas_hba.sas_address) | |
1607 | return _transport_expander_phy_control(ioc, phy, | |
1608 | (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : | |
1609 | SMP_PHY_CONTROL_LINK_RESET); | |
1610 | ||
1611 | /* handle hba phys */ | |
1612 | memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); | |
1613 | mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; | |
1614 | mpi_request.Operation = hard_reset ? | |
1615 | MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; | |
1616 | mpi_request.PhyNum = phy->number; | |
1617 | ||
1618 | if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { | |
1619 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1620 | ioc->name, __FILE__, __LINE__, __func__); | |
1621 | return -ENXIO; | |
1622 | } | |
1623 | ||
1624 | if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) | |
1625 | pr_info(MPT3SAS_FMT | |
1626 | "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", | |
1627 | ioc->name, phy->number, le16_to_cpu(mpi_reply.IOCStatus), | |
1628 | le32_to_cpu(mpi_reply.IOCLogInfo)); | |
1629 | ||
1630 | return 0; | |
1631 | } | |
1632 | ||
1633 | /** | |
1634 | * _transport_phy_enable - enable/disable phys | |
1635 | * @phy: The sas phy object | |
1636 | * @enable: enable phy when true | |
1637 | * | |
1638 | * Only support sas_host direct attached phys. | |
1639 | * Returns 0 for success, non-zero for failure. | |
1640 | */ | |
1641 | static int | |
1642 | _transport_phy_enable(struct sas_phy *phy, int enable) | |
1643 | { | |
1644 | struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); | |
1645 | Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; | |
1646 | Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; | |
1647 | Mpi2ConfigReply_t mpi_reply; | |
1648 | u16 ioc_status; | |
1649 | u16 sz; | |
1650 | int rc = 0; | |
1651 | unsigned long flags; | |
1652 | int i, discovery_active; | |
1653 | ||
1654 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
1655 | if (_transport_sas_node_find_by_sas_address(ioc, | |
1656 | phy->identify.sas_address) == NULL) { | |
1657 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1658 | return -EINVAL; | |
1659 | } | |
1660 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1661 | ||
1662 | /* handle expander phys */ | |
1663 | if (phy->identify.sas_address != ioc->sas_hba.sas_address) | |
1664 | return _transport_expander_phy_control(ioc, phy, | |
1665 | (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : | |
1666 | SMP_PHY_CONTROL_DISABLE); | |
1667 | ||
1668 | /* handle hba phys */ | |
1669 | ||
1670 | /* read sas_iounit page 0 */ | |
1671 | sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * | |
1672 | sizeof(Mpi2SasIOUnit0PhyData_t)); | |
1673 | sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); | |
1674 | if (!sas_iounit_pg0) { | |
1675 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1676 | ioc->name, __FILE__, __LINE__, __func__); | |
1677 | rc = -ENOMEM; | |
1678 | goto out; | |
1679 | } | |
1680 | if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, | |
1681 | sas_iounit_pg0, sz))) { | |
1682 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1683 | ioc->name, __FILE__, __LINE__, __func__); | |
1684 | rc = -ENXIO; | |
1685 | goto out; | |
1686 | } | |
1687 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1688 | MPI2_IOCSTATUS_MASK; | |
1689 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
1690 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1691 | ioc->name, __FILE__, __LINE__, __func__); | |
1692 | rc = -EIO; | |
1693 | goto out; | |
1694 | } | |
1695 | ||
1696 | /* unable to enable/disable phys when when discovery is active */ | |
1697 | for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) { | |
1698 | if (sas_iounit_pg0->PhyData[i].PortFlags & | |
1699 | MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { | |
1700 | pr_err(MPT3SAS_FMT "discovery is active on " \ | |
1701 | "port = %d, phy = %d: unable to enable/disable " | |
1702 | "phys, try again later!\n", ioc->name, | |
1703 | sas_iounit_pg0->PhyData[i].Port, i); | |
1704 | discovery_active = 1; | |
1705 | } | |
1706 | } | |
1707 | ||
1708 | if (discovery_active) { | |
1709 | rc = -EAGAIN; | |
1710 | goto out; | |
1711 | } | |
1712 | ||
1713 | /* read sas_iounit page 1 */ | |
1714 | sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * | |
1715 | sizeof(Mpi2SasIOUnit1PhyData_t)); | |
1716 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | |
1717 | if (!sas_iounit_pg1) { | |
1718 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1719 | ioc->name, __FILE__, __LINE__, __func__); | |
1720 | rc = -ENOMEM; | |
1721 | goto out; | |
1722 | } | |
1723 | if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, | |
1724 | sas_iounit_pg1, sz))) { | |
1725 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1726 | ioc->name, __FILE__, __LINE__, __func__); | |
1727 | rc = -ENXIO; | |
1728 | goto out; | |
1729 | } | |
1730 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1731 | MPI2_IOCSTATUS_MASK; | |
1732 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
1733 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1734 | ioc->name, __FILE__, __LINE__, __func__); | |
1735 | rc = -EIO; | |
1736 | goto out; | |
1737 | } | |
1738 | ||
1739 | /* copy Port/PortFlags/PhyFlags from page 0 */ | |
1740 | for (i = 0; i < ioc->sas_hba.num_phys ; i++) { | |
1741 | sas_iounit_pg1->PhyData[i].Port = | |
1742 | sas_iounit_pg0->PhyData[i].Port; | |
1743 | sas_iounit_pg1->PhyData[i].PortFlags = | |
1744 | (sas_iounit_pg0->PhyData[i].PortFlags & | |
1745 | MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG); | |
1746 | sas_iounit_pg1->PhyData[i].PhyFlags = | |
1747 | (sas_iounit_pg0->PhyData[i].PhyFlags & | |
1748 | (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED + | |
1749 | MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED)); | |
1750 | } | |
1751 | ||
1752 | if (enable) | |
1753 | sas_iounit_pg1->PhyData[phy->number].PhyFlags | |
1754 | &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; | |
1755 | else | |
1756 | sas_iounit_pg1->PhyData[phy->number].PhyFlags | |
1757 | |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; | |
1758 | ||
1759 | mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); | |
1760 | ||
1761 | /* link reset */ | |
1762 | if (enable) | |
1763 | _transport_phy_reset(phy, 0); | |
1764 | ||
1765 | out: | |
1766 | kfree(sas_iounit_pg1); | |
1767 | kfree(sas_iounit_pg0); | |
1768 | return rc; | |
1769 | } | |
1770 | ||
1771 | /** | |
1772 | * _transport_phy_speed - set phy min/max link rates | |
1773 | * @phy: The sas phy object | |
1774 | * @rates: rates defined in sas_phy_linkrates | |
1775 | * | |
1776 | * Only support sas_host direct attached phys. | |
1777 | * Returns 0 for success, non-zero for failure. | |
1778 | */ | |
1779 | static int | |
1780 | _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) | |
1781 | { | |
1782 | struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); | |
1783 | Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; | |
1784 | Mpi2SasPhyPage0_t phy_pg0; | |
1785 | Mpi2ConfigReply_t mpi_reply; | |
1786 | u16 ioc_status; | |
1787 | u16 sz; | |
1788 | int i; | |
1789 | int rc = 0; | |
1790 | unsigned long flags; | |
1791 | ||
1792 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
1793 | if (_transport_sas_node_find_by_sas_address(ioc, | |
1794 | phy->identify.sas_address) == NULL) { | |
1795 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1796 | return -EINVAL; | |
1797 | } | |
1798 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
1799 | ||
1800 | if (!rates->minimum_linkrate) | |
1801 | rates->minimum_linkrate = phy->minimum_linkrate; | |
1802 | else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) | |
1803 | rates->minimum_linkrate = phy->minimum_linkrate_hw; | |
1804 | ||
1805 | if (!rates->maximum_linkrate) | |
1806 | rates->maximum_linkrate = phy->maximum_linkrate; | |
1807 | else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) | |
1808 | rates->maximum_linkrate = phy->maximum_linkrate_hw; | |
1809 | ||
1810 | /* handle expander phys */ | |
1811 | if (phy->identify.sas_address != ioc->sas_hba.sas_address) { | |
1812 | phy->minimum_linkrate = rates->minimum_linkrate; | |
1813 | phy->maximum_linkrate = rates->maximum_linkrate; | |
1814 | return _transport_expander_phy_control(ioc, phy, | |
1815 | SMP_PHY_CONTROL_LINK_RESET); | |
1816 | } | |
1817 | ||
1818 | /* handle hba phys */ | |
1819 | ||
1820 | /* sas_iounit page 1 */ | |
1821 | sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * | |
1822 | sizeof(Mpi2SasIOUnit1PhyData_t)); | |
1823 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | |
1824 | if (!sas_iounit_pg1) { | |
1825 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1826 | ioc->name, __FILE__, __LINE__, __func__); | |
1827 | rc = -ENOMEM; | |
1828 | goto out; | |
1829 | } | |
1830 | if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, | |
1831 | sas_iounit_pg1, sz))) { | |
1832 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1833 | ioc->name, __FILE__, __LINE__, __func__); | |
1834 | rc = -ENXIO; | |
1835 | goto out; | |
1836 | } | |
1837 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1838 | MPI2_IOCSTATUS_MASK; | |
1839 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
1840 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1841 | ioc->name, __FILE__, __LINE__, __func__); | |
1842 | rc = -EIO; | |
1843 | goto out; | |
1844 | } | |
1845 | ||
1846 | for (i = 0; i < ioc->sas_hba.num_phys; i++) { | |
1847 | if (phy->number != i) { | |
1848 | sas_iounit_pg1->PhyData[i].MaxMinLinkRate = | |
1849 | (ioc->sas_hba.phy[i].phy->minimum_linkrate + | |
1850 | (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); | |
1851 | } else { | |
1852 | sas_iounit_pg1->PhyData[i].MaxMinLinkRate = | |
1853 | (rates->minimum_linkrate + | |
1854 | (rates->maximum_linkrate << 4)); | |
1855 | } | |
1856 | } | |
1857 | ||
1858 | if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, | |
1859 | sz)) { | |
1860 | pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", | |
1861 | ioc->name, __FILE__, __LINE__, __func__); | |
1862 | rc = -ENXIO; | |
1863 | goto out; | |
1864 | } | |
1865 | ||
1866 | /* link reset */ | |
1867 | _transport_phy_reset(phy, 0); | |
1868 | ||
1869 | /* read phy page 0, then update the rates in the sas transport phy */ | |
1870 | if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, | |
1871 | phy->number)) { | |
1872 | phy->minimum_linkrate = _transport_convert_phy_link_rate( | |
1873 | phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); | |
1874 | phy->maximum_linkrate = _transport_convert_phy_link_rate( | |
1875 | phy_pg0.ProgrammedLinkRate >> 4); | |
1876 | phy->negotiated_linkrate = _transport_convert_phy_link_rate( | |
1877 | phy_pg0.NegotiatedLinkRate & | |
1878 | MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); | |
1879 | } | |
1880 | ||
1881 | out: | |
1882 | kfree(sas_iounit_pg1); | |
1883 | return rc; | |
1884 | } | |
1885 | ||
1886 | /** | |
1887 | * _transport_smp_handler - transport portal for smp passthru | |
1888 | * @shost: shost object | |
1889 | * @rphy: sas transport rphy object | |
1890 | * @req: | |
1891 | * | |
1892 | * This used primarily for smp_utils. | |
1893 | * Example: | |
1894 | * smp_rep_general /sys/class/bsg/expander-5:0 | |
1895 | */ | |
1896 | static int | |
1897 | _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, | |
1898 | struct request *req) | |
1899 | { | |
1900 | struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); | |
1901 | Mpi2SmpPassthroughRequest_t *mpi_request; | |
1902 | Mpi2SmpPassthroughReply_t *mpi_reply; | |
7988613b | 1903 | int rc; |
f92363d1 SR |
1904 | u16 smid; |
1905 | u32 ioc_state; | |
1906 | unsigned long timeleft; | |
1907 | void *psge; | |
1908 | u8 issue_reset = 0; | |
1909 | dma_addr_t dma_addr_in = 0; | |
1910 | dma_addr_t dma_addr_out = 0; | |
1911 | dma_addr_t pci_dma_in = 0; | |
1912 | dma_addr_t pci_dma_out = 0; | |
1913 | void *pci_addr_in = NULL; | |
1914 | void *pci_addr_out = NULL; | |
1915 | u16 wait_state_count; | |
1916 | struct request *rsp = req->next_rq; | |
7988613b KO |
1917 | struct bio_vec bvec; |
1918 | struct bvec_iter iter; | |
f92363d1 SR |
1919 | |
1920 | if (!rsp) { | |
1921 | pr_err(MPT3SAS_FMT "%s: the smp response space is missing\n", | |
1922 | ioc->name, __func__); | |
1923 | return -EINVAL; | |
1924 | } | |
1925 | ||
1926 | if (ioc->shost_recovery || ioc->pci_error_recovery) { | |
1927 | pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", | |
1928 | __func__, ioc->name); | |
1929 | return -EFAULT; | |
1930 | } | |
1931 | ||
1932 | rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); | |
1933 | if (rc) | |
1934 | return rc; | |
1935 | ||
1936 | if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { | |
1937 | pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", ioc->name, | |
1938 | __func__); | |
1939 | rc = -EAGAIN; | |
1940 | goto out; | |
1941 | } | |
1942 | ioc->transport_cmds.status = MPT3_CMD_PENDING; | |
1943 | ||
1944 | /* Check if the request is split across multiple segments */ | |
458b76ed | 1945 | if (bio_multiple_segments(req->bio)) { |
f92363d1 SR |
1946 | u32 offset = 0; |
1947 | ||
1948 | /* Allocate memory and copy the request */ | |
1949 | pci_addr_out = pci_alloc_consistent(ioc->pdev, | |
1950 | blk_rq_bytes(req), &pci_dma_out); | |
1951 | if (!pci_addr_out) { | |
1952 | pr_info(MPT3SAS_FMT "%s(): PCI Addr out = NULL\n", | |
1953 | ioc->name, __func__); | |
1954 | rc = -ENOMEM; | |
1955 | goto out; | |
1956 | } | |
1957 | ||
7988613b | 1958 | bio_for_each_segment(bvec, req->bio, iter) { |
f92363d1 | 1959 | memcpy(pci_addr_out + offset, |
7988613b KO |
1960 | page_address(bvec.bv_page) + bvec.bv_offset, |
1961 | bvec.bv_len); | |
1962 | offset += bvec.bv_len; | |
f92363d1 SR |
1963 | } |
1964 | } else { | |
1965 | dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), | |
1966 | blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); | |
36814028 | 1967 | if (pci_dma_mapping_error(ioc->pdev, dma_addr_out)) { |
f92363d1 SR |
1968 | pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n", |
1969 | ioc->name, __func__); | |
1970 | rc = -ENOMEM; | |
1971 | goto free_pci; | |
1972 | } | |
1973 | } | |
1974 | ||
1975 | /* Check if the response needs to be populated across | |
1976 | * multiple segments */ | |
458b76ed | 1977 | if (bio_multiple_segments(rsp->bio)) { |
f92363d1 SR |
1978 | pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp), |
1979 | &pci_dma_in); | |
1980 | if (!pci_addr_in) { | |
1981 | pr_info(MPT3SAS_FMT "%s(): PCI Addr in = NULL\n", | |
1982 | ioc->name, __func__); | |
1983 | rc = -ENOMEM; | |
1984 | goto unmap; | |
1985 | } | |
1986 | } else { | |
1987 | dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), | |
1988 | blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); | |
36814028 | 1989 | if (pci_dma_mapping_error(ioc->pdev, dma_addr_in)) { |
f92363d1 SR |
1990 | pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n", |
1991 | ioc->name, __func__); | |
1992 | rc = -ENOMEM; | |
1993 | goto unmap; | |
1994 | } | |
1995 | } | |
1996 | ||
1997 | wait_state_count = 0; | |
1998 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
1999 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
2000 | if (wait_state_count++ == 10) { | |
2001 | pr_err(MPT3SAS_FMT | |
2002 | "%s: failed due to ioc not operational\n", | |
2003 | ioc->name, __func__); | |
2004 | rc = -EFAULT; | |
2005 | goto unmap; | |
2006 | } | |
2007 | ssleep(1); | |
2008 | ioc_state = mpt3sas_base_get_iocstate(ioc, 1); | |
2009 | pr_info(MPT3SAS_FMT | |
2010 | "%s: waiting for operational state(count=%d)\n", | |
2011 | ioc->name, __func__, wait_state_count); | |
2012 | } | |
2013 | if (wait_state_count) | |
2014 | pr_info(MPT3SAS_FMT "%s: ioc is operational\n", | |
2015 | ioc->name, __func__); | |
2016 | ||
2017 | smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); | |
2018 | if (!smid) { | |
2019 | pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", | |
2020 | ioc->name, __func__); | |
2021 | rc = -EAGAIN; | |
2022 | goto unmap; | |
2023 | } | |
2024 | ||
2025 | rc = 0; | |
2026 | mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); | |
2027 | ioc->transport_cmds.smid = smid; | |
2028 | ||
2029 | memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); | |
2030 | mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; | |
2031 | mpi_request->PhysicalPort = 0xFF; | |
2032 | mpi_request->SASAddress = (rphy) ? | |
2033 | cpu_to_le64(rphy->identify.sas_address) : | |
2034 | cpu_to_le64(ioc->sas_hba.sas_address); | |
2035 | mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); | |
2036 | psge = &mpi_request->SGL; | |
2037 | ||
458b76ed | 2038 | if (bio_multiple_segments(req->bio)) |
f92363d1 SR |
2039 | ioc->build_sg(ioc, psge, pci_dma_out, (blk_rq_bytes(req) - 4), |
2040 | pci_dma_in, (blk_rq_bytes(rsp) + 4)); | |
2041 | else | |
2042 | ioc->build_sg(ioc, psge, dma_addr_out, (blk_rq_bytes(req) - 4), | |
2043 | dma_addr_in, (blk_rq_bytes(rsp) + 4)); | |
2044 | ||
2045 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
2046 | "%s - sending smp request\n", ioc->name, __func__)); | |
2047 | ||
2048 | init_completion(&ioc->transport_cmds.done); | |
2049 | mpt3sas_base_put_smid_default(ioc, smid); | |
2050 | timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, | |
2051 | 10*HZ); | |
2052 | ||
2053 | if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { | |
2054 | pr_err(MPT3SAS_FMT "%s : timeout\n", | |
2055 | __func__, ioc->name); | |
2056 | _debug_dump_mf(mpi_request, | |
2057 | sizeof(Mpi2SmpPassthroughRequest_t)/4); | |
2058 | if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) | |
2059 | issue_reset = 1; | |
2060 | goto issue_host_reset; | |
2061 | } | |
2062 | ||
2063 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
2064 | "%s - complete\n", ioc->name, __func__)); | |
2065 | ||
2066 | if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { | |
2067 | ||
2068 | mpi_reply = ioc->transport_cmds.reply; | |
2069 | ||
2070 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
2071 | "%s - reply data transfer size(%d)\n", | |
2072 | ioc->name, __func__, | |
2073 | le16_to_cpu(mpi_reply->ResponseDataLength))); | |
2074 | ||
2075 | memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); | |
2076 | req->sense_len = sizeof(*mpi_reply); | |
2077 | req->resid_len = 0; | |
2078 | rsp->resid_len -= | |
2079 | le16_to_cpu(mpi_reply->ResponseDataLength); | |
2080 | ||
2081 | /* check if the resp needs to be copied from the allocated | |
2082 | * pci mem */ | |
458b76ed | 2083 | if (bio_multiple_segments(rsp->bio)) { |
f92363d1 SR |
2084 | u32 offset = 0; |
2085 | u32 bytes_to_copy = | |
2086 | le16_to_cpu(mpi_reply->ResponseDataLength); | |
7988613b KO |
2087 | bio_for_each_segment(bvec, rsp->bio, iter) { |
2088 | if (bytes_to_copy <= bvec.bv_len) { | |
2089 | memcpy(page_address(bvec.bv_page) + | |
2090 | bvec.bv_offset, pci_addr_in + | |
f92363d1 SR |
2091 | offset, bytes_to_copy); |
2092 | break; | |
2093 | } else { | |
7988613b KO |
2094 | memcpy(page_address(bvec.bv_page) + |
2095 | bvec.bv_offset, pci_addr_in + | |
2096 | offset, bvec.bv_len); | |
2097 | bytes_to_copy -= bvec.bv_len; | |
f92363d1 | 2098 | } |
7988613b | 2099 | offset += bvec.bv_len; |
f92363d1 SR |
2100 | } |
2101 | } | |
2102 | } else { | |
2103 | dtransportprintk(ioc, pr_info(MPT3SAS_FMT | |
2104 | "%s - no reply\n", ioc->name, __func__)); | |
2105 | rc = -ENXIO; | |
2106 | } | |
2107 | ||
2108 | issue_host_reset: | |
2109 | if (issue_reset) { | |
2110 | mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
2111 | FORCE_BIG_HAMMER); | |
2112 | rc = -ETIMEDOUT; | |
2113 | } | |
2114 | ||
2115 | unmap: | |
2116 | if (dma_addr_out) | |
2117 | pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req), | |
2118 | PCI_DMA_BIDIRECTIONAL); | |
2119 | if (dma_addr_in) | |
2120 | pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp), | |
2121 | PCI_DMA_BIDIRECTIONAL); | |
2122 | ||
2123 | free_pci: | |
2124 | if (pci_addr_out) | |
2125 | pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out, | |
2126 | pci_dma_out); | |
2127 | ||
2128 | if (pci_addr_in) | |
2129 | pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in, | |
2130 | pci_dma_in); | |
2131 | ||
2132 | out: | |
2133 | ioc->transport_cmds.status = MPT3_CMD_NOT_USED; | |
2134 | mutex_unlock(&ioc->transport_cmds.mutex); | |
2135 | return rc; | |
2136 | } | |
2137 | ||
2138 | struct sas_function_template mpt3sas_transport_functions = { | |
2139 | .get_linkerrors = _transport_get_linkerrors, | |
2140 | .get_enclosure_identifier = _transport_get_enclosure_identifier, | |
2141 | .get_bay_identifier = _transport_get_bay_identifier, | |
2142 | .phy_reset = _transport_phy_reset, | |
2143 | .phy_enable = _transport_phy_enable, | |
2144 | .set_phy_speed = _transport_phy_speed, | |
2145 | .smp_handler = _transport_smp_handler, | |
2146 | }; | |
2147 | ||
2148 | struct scsi_transport_template *mpt3sas_transport_template; |