]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | NinjaSCSI-3 / NinjaSCSI-32Bi PCMCIA SCSI host adapter card driver | |
4 | By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> | |
5 | ||
6 | Ver.2.8 Support 32bit MMIO mode | |
7 | Support Synchronous Data Transfer Request (SDTR) mode | |
8 | Ver.2.0 Support 32bit PIO mode | |
9 | Ver.1.1.2 Fix for scatter list buffer exceeds | |
10 | Ver.1.1 Support scatter list | |
11 | Ver.0.1 Initial version | |
12 | ||
13 | This software may be used and distributed according to the terms of | |
14 | the GNU General Public License. | |
15 | ||
16 | ======================================================================*/ | |
17 | ||
18 | /*********************************************************************** | |
19 | This driver is for these PCcards. | |
20 | ||
21 | I-O DATA PCSC-F (Workbit NinjaSCSI-3) | |
22 | "WBT", "NinjaSCSI-3", "R1.0" | |
23 | I-O DATA CBSC-II (Workbit NinjaSCSI-32Bi in 16bit mode) | |
24 | "IO DATA", "CBSC16 ", "1" | |
25 | ||
26 | ***********************************************************************/ | |
27 | ||
28 | /* $Id: nsp_cs.c,v 1.23 2003/08/18 11:09:19 elca Exp $ */ | |
29 | ||
30 | #include <linux/version.h> | |
31 | #include <linux/module.h> | |
32 | #include <linux/kernel.h> | |
33 | #include <linux/init.h> | |
34 | #include <linux/sched.h> | |
35 | #include <linux/slab.h> | |
36 | #include <linux/string.h> | |
37 | #include <linux/timer.h> | |
38 | #include <linux/ioport.h> | |
39 | #include <linux/delay.h> | |
40 | #include <linux/interrupt.h> | |
41 | #include <linux/major.h> | |
42 | #include <linux/blkdev.h> | |
43 | #include <linux/stat.h> | |
44 | ||
45 | #include <asm/io.h> | |
46 | #include <asm/irq.h> | |
47 | ||
48 | #include <../drivers/scsi/scsi.h> | |
49 | #include <scsi/scsi_host.h> | |
50 | ||
51 | #include <scsi/scsi.h> | |
52 | #include <scsi/scsi_ioctl.h> | |
53 | ||
1da177e4 LT |
54 | #include <pcmcia/cs_types.h> |
55 | #include <pcmcia/cs.h> | |
56 | #include <pcmcia/cistpl.h> | |
57 | #include <pcmcia/cisreg.h> | |
58 | #include <pcmcia/ds.h> | |
59 | ||
60 | #include "nsp_cs.h" | |
61 | ||
62 | MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>"); | |
63 | MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module $Revision: 1.23 $"); | |
64 | MODULE_SUPPORTED_DEVICE("sd,sr,sg,st"); | |
65 | #ifdef MODULE_LICENSE | |
66 | MODULE_LICENSE("GPL"); | |
67 | #endif | |
68 | ||
69 | #include "nsp_io.h" | |
70 | ||
71 | /*====================================================================*/ | |
72 | /* Parameters that can be set with 'insmod' */ | |
73 | ||
74 | static int nsp_burst_mode = BURST_MEM32; | |
75 | module_param(nsp_burst_mode, int, 0); | |
76 | MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))"); | |
77 | ||
78 | /* Release IO ports after configuration? */ | |
79 | static int free_ports = 0; | |
80 | module_param(free_ports, bool, 0); | |
81 | MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))"); | |
82 | ||
d0be4a7d | 83 | static struct scsi_host_template nsp_driver_template = { |
1da177e4 LT |
84 | .proc_name = "nsp_cs", |
85 | .proc_info = nsp_proc_info, | |
86 | .name = "WorkBit NinjaSCSI-3/32Bi(16bit)", | |
87 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) | |
88 | .detect = nsp_detect_old, | |
89 | .release = nsp_release_old, | |
90 | #endif | |
91 | .info = nsp_info, | |
92 | .queuecommand = nsp_queuecommand, | |
1da177e4 | 93 | /* .eh_abort_handler = nsp_eh_abort,*/ |
1da177e4 LT |
94 | .eh_bus_reset_handler = nsp_eh_bus_reset, |
95 | .eh_host_reset_handler = nsp_eh_host_reset, | |
96 | .can_queue = 1, | |
97 | .this_id = NSP_INITIATOR_ID, | |
98 | .sg_tablesize = SG_ALL, | |
99 | .cmd_per_lun = 1, | |
100 | .use_clustering = DISABLE_CLUSTERING, | |
101 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2)) | |
102 | .use_new_eh_code = 1, | |
103 | #endif | |
104 | }; | |
105 | ||
1da177e4 LT |
106 | static nsp_hw_data nsp_data_base; /* attach <-> detect glue */ |
107 | ||
108 | ||
109 | ||
110 | /* | |
111 | * debug, error print | |
112 | */ | |
113 | #ifndef NSP_DEBUG | |
114 | # define NSP_DEBUG_MASK 0x000000 | |
115 | # define nsp_msg(type, args...) nsp_cs_message("", 0, (type), args) | |
116 | # define nsp_dbg(mask, args...) /* */ | |
117 | #else | |
118 | # define NSP_DEBUG_MASK 0xffffff | |
119 | # define nsp_msg(type, args...) \ | |
120 | nsp_cs_message (__FUNCTION__, __LINE__, (type), args) | |
121 | # define nsp_dbg(mask, args...) \ | |
122 | nsp_cs_dmessage(__FUNCTION__, __LINE__, (mask), args) | |
123 | #endif | |
124 | ||
125 | #define NSP_DEBUG_QUEUECOMMAND BIT(0) | |
126 | #define NSP_DEBUG_REGISTER BIT(1) | |
127 | #define NSP_DEBUG_AUTOSCSI BIT(2) | |
128 | #define NSP_DEBUG_INTR BIT(3) | |
129 | #define NSP_DEBUG_SGLIST BIT(4) | |
130 | #define NSP_DEBUG_BUSFREE BIT(5) | |
131 | #define NSP_DEBUG_CDB_CONTENTS BIT(6) | |
132 | #define NSP_DEBUG_RESELECTION BIT(7) | |
133 | #define NSP_DEBUG_MSGINOCCUR BIT(8) | |
134 | #define NSP_DEBUG_EEPROM BIT(9) | |
135 | #define NSP_DEBUG_MSGOUTOCCUR BIT(10) | |
136 | #define NSP_DEBUG_BUSRESET BIT(11) | |
137 | #define NSP_DEBUG_RESTART BIT(12) | |
138 | #define NSP_DEBUG_SYNC BIT(13) | |
139 | #define NSP_DEBUG_WAIT BIT(14) | |
140 | #define NSP_DEBUG_TARGETFLAG BIT(15) | |
141 | #define NSP_DEBUG_PROC BIT(16) | |
142 | #define NSP_DEBUG_INIT BIT(17) | |
143 | #define NSP_DEBUG_DATA_IO BIT(18) | |
144 | #define NSP_SPECIAL_PRINT_REGISTER BIT(20) | |
145 | ||
146 | #define NSP_DEBUG_BUF_LEN 150 | |
147 | ||
148 | static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...) | |
149 | { | |
150 | va_list args; | |
151 | char buf[NSP_DEBUG_BUF_LEN]; | |
152 | ||
153 | va_start(args, fmt); | |
154 | vsnprintf(buf, sizeof(buf), fmt, args); | |
155 | va_end(args); | |
156 | ||
157 | #ifndef NSP_DEBUG | |
158 | printk("%snsp_cs: %s\n", type, buf); | |
159 | #else | |
160 | printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf); | |
161 | #endif | |
162 | } | |
163 | ||
164 | #ifdef NSP_DEBUG | |
165 | static void nsp_cs_dmessage(const char *func, int line, int mask, char *fmt, ...) | |
166 | { | |
167 | va_list args; | |
168 | char buf[NSP_DEBUG_BUF_LEN]; | |
169 | ||
170 | va_start(args, fmt); | |
171 | vsnprintf(buf, sizeof(buf), fmt, args); | |
172 | va_end(args); | |
173 | ||
174 | if (mask & NSP_DEBUG_MASK) { | |
175 | printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); | |
176 | } | |
177 | } | |
178 | #endif | |
179 | ||
180 | /***********************************************************/ | |
181 | ||
182 | /*==================================================== | |
183 | * Clenaup parameters and call done() functions. | |
184 | * You must be set SCpnt->result before call this function. | |
185 | */ | |
0fc82d5e | 186 | static void nsp_scsi_done(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
187 | { |
188 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
189 | ||
190 | data->CurrentSC = NULL; | |
191 | ||
192 | SCpnt->scsi_done(SCpnt); | |
193 | } | |
194 | ||
0fc82d5e HK |
195 | static int nsp_queuecommand(struct scsi_cmnd *SCpnt, |
196 | void (*done)(struct scsi_cmnd *)) | |
1da177e4 LT |
197 | { |
198 | #ifdef NSP_DEBUG | |
199 | /*unsigned int host_id = SCpnt->device->host->this_id;*/ | |
200 | /*unsigned int base = SCpnt->device->host->io_port;*/ | |
422c0d61 | 201 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
202 | #endif |
203 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
204 | ||
205 | nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d", | |
206 | SCpnt, target, SCpnt->device->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg); | |
207 | //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC); | |
208 | ||
209 | SCpnt->scsi_done = done; | |
210 | ||
211 | if (data->CurrentSC != NULL) { | |
212 | nsp_msg(KERN_DEBUG, "CurrentSC!=NULL this can't be happen"); | |
213 | SCpnt->result = DID_BAD_TARGET << 16; | |
214 | nsp_scsi_done(SCpnt); | |
215 | return 0; | |
216 | } | |
217 | ||
218 | #if 0 | |
219 | /* XXX: pcmcia-cs generates SCSI command with "scsi_info" utility. | |
220 | This makes kernel crash when suspending... */ | |
221 | if (data->ScsiInfo->stop != 0) { | |
222 | nsp_msg(KERN_INFO, "suspending device. reject command."); | |
223 | SCpnt->result = DID_BAD_TARGET << 16; | |
224 | nsp_scsi_done(SCpnt); | |
225 | return SCSI_MLQUEUE_HOST_BUSY; | |
226 | } | |
227 | #endif | |
228 | ||
229 | show_command(SCpnt); | |
230 | ||
231 | data->CurrentSC = SCpnt; | |
232 | ||
233 | SCpnt->SCp.Status = CHECK_CONDITION; | |
234 | SCpnt->SCp.Message = 0; | |
235 | SCpnt->SCp.have_data_in = IO_UNKNOWN; | |
236 | SCpnt->SCp.sent_command = 0; | |
237 | SCpnt->SCp.phase = PH_UNDETERMINED; | |
238 | SCpnt->resid = SCpnt->request_bufflen; | |
239 | ||
240 | /* setup scratch area | |
241 | SCp.ptr : buffer pointer | |
242 | SCp.this_residual : buffer length | |
243 | SCp.buffer : next buffer | |
244 | SCp.buffers_residual : left buffers in list | |
245 | SCp.phase : current state of the command */ | |
246 | if (SCpnt->use_sg) { | |
247 | SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; | |
248 | SCpnt->SCp.ptr = BUFFER_ADDR; | |
249 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
250 | SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; | |
251 | } else { | |
252 | SCpnt->SCp.ptr = (char *) SCpnt->request_buffer; | |
253 | SCpnt->SCp.this_residual = SCpnt->request_bufflen; | |
254 | SCpnt->SCp.buffer = NULL; | |
255 | SCpnt->SCp.buffers_residual = 0; | |
256 | } | |
257 | ||
258 | if (nsphw_start_selection(SCpnt) == FALSE) { | |
259 | nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail"); | |
260 | SCpnt->result = DID_BUS_BUSY << 16; | |
261 | nsp_scsi_done(SCpnt); | |
262 | return 0; | |
263 | } | |
264 | ||
265 | ||
266 | //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "out"); | |
267 | #ifdef NSP_DEBUG | |
268 | data->CmdId++; | |
269 | #endif | |
270 | return 0; | |
271 | } | |
272 | ||
273 | /* | |
274 | * setup PIO FIFO transfer mode and enable/disable to data out | |
275 | */ | |
276 | static void nsp_setup_fifo(nsp_hw_data *data, int enabled) | |
277 | { | |
278 | unsigned int base = data->BaseAddress; | |
279 | unsigned char transfer_mode_reg; | |
280 | ||
281 | //nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled); | |
282 | ||
283 | if (enabled != FALSE) { | |
284 | transfer_mode_reg = TRANSFER_GO | BRAIND; | |
285 | } else { | |
286 | transfer_mode_reg = 0; | |
287 | } | |
288 | ||
289 | transfer_mode_reg |= data->TransferMode; | |
290 | ||
291 | nsp_index_write(base, TRANSFERMODE, transfer_mode_reg); | |
292 | } | |
293 | ||
294 | static void nsphw_init_sync(nsp_hw_data *data) | |
295 | { | |
296 | sync_data tmp_sync = { .SyncNegotiation = SYNC_NOT_YET, | |
297 | .SyncPeriod = 0, | |
298 | .SyncOffset = 0 | |
299 | }; | |
300 | int i; | |
301 | ||
302 | /* setup sync data */ | |
303 | for ( i = 0; i < ARRAY_SIZE(data->Sync); i++ ) { | |
304 | data->Sync[i] = tmp_sync; | |
305 | } | |
306 | } | |
307 | ||
308 | /* | |
309 | * Initialize Ninja hardware | |
310 | */ | |
311 | static int nsphw_init(nsp_hw_data *data) | |
312 | { | |
313 | unsigned int base = data->BaseAddress; | |
314 | ||
315 | nsp_dbg(NSP_DEBUG_INIT, "in base=0x%x", base); | |
316 | ||
317 | data->ScsiClockDiv = CLOCK_40M | FAST_20; | |
318 | data->CurrentSC = NULL; | |
319 | data->FifoCount = 0; | |
320 | data->TransferMode = MODE_IO8; | |
321 | ||
322 | nsphw_init_sync(data); | |
323 | ||
324 | /* block all interrupts */ | |
325 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK); | |
326 | ||
327 | /* setup SCSI interface */ | |
328 | nsp_write(base, IFSELECT, IF_IFSEL); | |
329 | ||
330 | nsp_index_write(base, SCSIIRQMODE, 0); | |
331 | ||
332 | nsp_index_write(base, TRANSFERMODE, MODE_IO8); | |
333 | nsp_index_write(base, CLOCKDIV, data->ScsiClockDiv); | |
334 | ||
335 | nsp_index_write(base, PARITYCTRL, 0); | |
336 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | | |
337 | ACK_COUNTER_CLEAR | | |
338 | REQ_COUNTER_CLEAR | | |
339 | HOST_COUNTER_CLEAR); | |
340 | ||
341 | /* setup fifo asic */ | |
342 | nsp_write(base, IFSELECT, IF_REGSEL); | |
343 | nsp_index_write(base, TERMPWRCTRL, 0); | |
344 | if ((nsp_index_read(base, OTHERCONTROL) & TPWR_SENSE) == 0) { | |
345 | nsp_msg(KERN_INFO, "terminator power on"); | |
346 | nsp_index_write(base, TERMPWRCTRL, POWER_ON); | |
347 | } | |
348 | ||
349 | nsp_index_write(base, TIMERCOUNT, 0); | |
350 | nsp_index_write(base, TIMERCOUNT, 0); /* requires 2 times!! */ | |
351 | ||
352 | nsp_index_write(base, SYNCREG, 0); | |
353 | nsp_index_write(base, ACKWIDTH, 0); | |
354 | ||
355 | /* enable interrupts and ack them */ | |
356 | nsp_index_write(base, SCSIIRQMODE, SCSI_PHASE_CHANGE_EI | | |
357 | RESELECT_EI | | |
358 | SCSI_RESET_IRQ_EI ); | |
359 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR); | |
360 | ||
361 | nsp_setup_fifo(data, FALSE); | |
362 | ||
363 | return TRUE; | |
364 | } | |
365 | ||
366 | /* | |
367 | * Start selection phase | |
368 | */ | |
0fc82d5e | 369 | static int nsphw_start_selection(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
370 | { |
371 | unsigned int host_id = SCpnt->device->host->this_id; | |
372 | unsigned int base = SCpnt->device->host->io_port; | |
422c0d61 | 373 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
374 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; |
375 | int time_out; | |
376 | unsigned char phase, arbit; | |
377 | ||
378 | //nsp_dbg(NSP_DEBUG_RESELECTION, "in"); | |
379 | ||
380 | phase = nsp_index_read(base, SCSIBUSMON); | |
381 | if(phase != BUSMON_BUS_FREE) { | |
382 | //nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy"); | |
383 | return FALSE; | |
384 | } | |
385 | ||
386 | /* start arbitration */ | |
387 | //nsp_dbg(NSP_DEBUG_RESELECTION, "start arbit"); | |
388 | SCpnt->SCp.phase = PH_ARBSTART; | |
389 | nsp_index_write(base, SETARBIT, ARBIT_GO); | |
390 | ||
391 | time_out = 1000; | |
392 | do { | |
393 | /* XXX: what a stupid chip! */ | |
394 | arbit = nsp_index_read(base, ARBITSTATUS); | |
395 | //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit=%d, wait_count=%d", arbit, wait_count); | |
396 | udelay(1); /* hold 1.2us */ | |
397 | } while((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 && | |
398 | (time_out-- != 0)); | |
399 | ||
400 | if (!(arbit & ARBIT_WIN)) { | |
401 | //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail"); | |
402 | nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR); | |
403 | return FALSE; | |
404 | } | |
405 | ||
406 | /* assert select line */ | |
407 | //nsp_dbg(NSP_DEBUG_RESELECTION, "assert SEL line"); | |
408 | SCpnt->SCp.phase = PH_SELSTART; | |
409 | udelay(3); /* wait 2.4us */ | |
410 | nsp_index_write(base, SCSIDATALATCH, BIT(host_id) | BIT(target)); | |
411 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_ATN); | |
412 | udelay(2); /* wait >1.2us */ | |
413 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_DATAOUT_ENB | SCSI_ATN); | |
414 | nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR); | |
415 | /*udelay(1);*/ /* wait >90ns */ | |
416 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_DATAOUT_ENB | SCSI_ATN); | |
417 | ||
418 | /* check selection timeout */ | |
419 | nsp_start_timer(SCpnt, 1000/51); | |
420 | data->SelectionTimeOut = 1; | |
421 | ||
422 | return TRUE; | |
423 | } | |
424 | ||
425 | struct nsp_sync_table { | |
426 | unsigned int min_period; | |
427 | unsigned int max_period; | |
428 | unsigned int chip_period; | |
429 | unsigned int ack_width; | |
430 | }; | |
431 | ||
432 | static struct nsp_sync_table nsp_sync_table_40M[] = { | |
433 | {0x0c, 0x0c, 0x1, 0}, /* 20MB 50ns*/ | |
434 | {0x19, 0x19, 0x3, 1}, /* 10MB 100ns*/ | |
435 | {0x1a, 0x25, 0x5, 2}, /* 7.5MB 150ns*/ | |
436 | {0x26, 0x32, 0x7, 3}, /* 5MB 200ns*/ | |
437 | { 0, 0, 0, 0}, | |
438 | }; | |
439 | ||
440 | static struct nsp_sync_table nsp_sync_table_20M[] = { | |
441 | {0x19, 0x19, 0x1, 0}, /* 10MB 100ns*/ | |
442 | {0x1a, 0x25, 0x2, 0}, /* 7.5MB 150ns*/ | |
443 | {0x26, 0x32, 0x3, 1}, /* 5MB 200ns*/ | |
444 | { 0, 0, 0, 0}, | |
445 | }; | |
446 | ||
447 | /* | |
448 | * setup synchronous data transfer mode | |
449 | */ | |
0fc82d5e | 450 | static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt) |
1da177e4 | 451 | { |
422c0d61 | 452 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
453 | // unsigned char lun = SCpnt->device->lun; |
454 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
455 | sync_data *sync = &(data->Sync[target]); | |
456 | struct nsp_sync_table *sync_table; | |
457 | unsigned int period, offset; | |
458 | int i; | |
459 | ||
460 | ||
461 | nsp_dbg(NSP_DEBUG_SYNC, "in"); | |
462 | ||
463 | period = sync->SyncPeriod; | |
464 | offset = sync->SyncOffset; | |
465 | ||
466 | nsp_dbg(NSP_DEBUG_SYNC, "period=0x%x, offset=0x%x", period, offset); | |
467 | ||
468 | if ((data->ScsiClockDiv & (BIT(0)|BIT(1))) == CLOCK_20M) { | |
469 | sync_table = nsp_sync_table_20M; | |
470 | } else { | |
471 | sync_table = nsp_sync_table_40M; | |
472 | } | |
473 | ||
474 | for ( i = 0; sync_table->max_period != 0; i++, sync_table++) { | |
475 | if ( period >= sync_table->min_period && | |
476 | period <= sync_table->max_period ) { | |
477 | break; | |
478 | } | |
479 | } | |
480 | ||
481 | if (period != 0 && sync_table->max_period == 0) { | |
482 | /* | |
483 | * No proper period/offset found | |
484 | */ | |
485 | nsp_dbg(NSP_DEBUG_SYNC, "no proper period/offset"); | |
486 | ||
487 | sync->SyncPeriod = 0; | |
488 | sync->SyncOffset = 0; | |
489 | sync->SyncRegister = 0; | |
490 | sync->AckWidth = 0; | |
491 | ||
492 | return FALSE; | |
493 | } | |
494 | ||
495 | sync->SyncRegister = (sync_table->chip_period << SYNCREG_PERIOD_SHIFT) | | |
496 | (offset & SYNCREG_OFFSET_MASK); | |
497 | sync->AckWidth = sync_table->ack_width; | |
498 | ||
499 | nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth); | |
500 | ||
501 | return TRUE; | |
502 | } | |
503 | ||
504 | ||
505 | /* | |
506 | * start ninja hardware timer | |
507 | */ | |
0fc82d5e | 508 | static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time) |
1da177e4 LT |
509 | { |
510 | unsigned int base = SCpnt->device->host->io_port; | |
511 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
512 | ||
513 | //nsp_dbg(NSP_DEBUG_INTR, "in SCpnt=0x%p, time=%d", SCpnt, time); | |
514 | data->TimerCount = time; | |
515 | nsp_index_write(base, TIMERCOUNT, time); | |
516 | } | |
517 | ||
518 | /* | |
519 | * wait for bus phase change | |
520 | */ | |
0fc82d5e HK |
521 | static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask, |
522 | char *str) | |
1da177e4 LT |
523 | { |
524 | unsigned int base = SCpnt->device->host->io_port; | |
525 | unsigned char reg; | |
526 | int time_out; | |
527 | ||
528 | //nsp_dbg(NSP_DEBUG_INTR, "in"); | |
529 | ||
530 | time_out = 100; | |
531 | ||
532 | do { | |
533 | reg = nsp_index_read(base, SCSIBUSMON); | |
534 | if (reg == 0xff) { | |
535 | break; | |
536 | } | |
537 | } while ((time_out-- != 0) && (reg & mask) != 0); | |
538 | ||
539 | if (time_out == 0) { | |
540 | nsp_msg(KERN_DEBUG, " %s signal off timeut", str); | |
541 | } | |
542 | ||
543 | return 0; | |
544 | } | |
545 | ||
546 | /* | |
547 | * expect Ninja Irq | |
548 | */ | |
0fc82d5e HK |
549 | static int nsp_expect_signal(struct scsi_cmnd *SCpnt, |
550 | unsigned char current_phase, | |
551 | unsigned char mask) | |
1da177e4 LT |
552 | { |
553 | unsigned int base = SCpnt->device->host->io_port; | |
554 | int time_out; | |
555 | unsigned char phase, i_src; | |
556 | ||
557 | //nsp_dbg(NSP_DEBUG_INTR, "current_phase=0x%x, mask=0x%x", current_phase, mask); | |
558 | ||
559 | time_out = 100; | |
560 | do { | |
561 | phase = nsp_index_read(base, SCSIBUSMON); | |
562 | if (phase == 0xff) { | |
563 | //nsp_dbg(NSP_DEBUG_INTR, "ret -1"); | |
564 | return -1; | |
565 | } | |
566 | i_src = nsp_read(base, IRQSTATUS); | |
567 | if (i_src & IRQSTATUS_SCSI) { | |
568 | //nsp_dbg(NSP_DEBUG_INTR, "ret 0 found scsi signal"); | |
569 | return 0; | |
570 | } | |
571 | if ((phase & mask) != 0 && (phase & BUSMON_PHASE_MASK) == current_phase) { | |
572 | //nsp_dbg(NSP_DEBUG_INTR, "ret 1 phase=0x%x", phase); | |
573 | return 1; | |
574 | } | |
575 | } while(time_out-- != 0); | |
576 | ||
577 | //nsp_dbg(NSP_DEBUG_INTR, "timeout"); | |
578 | return -1; | |
579 | } | |
580 | ||
581 | /* | |
582 | * transfer SCSI message | |
583 | */ | |
0fc82d5e | 584 | static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase) |
1da177e4 LT |
585 | { |
586 | unsigned int base = SCpnt->device->host->io_port; | |
587 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
588 | char *buf = data->MsgBuffer; | |
589 | int len = min(MSGBUF_SIZE, data->MsgLen); | |
590 | int ptr; | |
591 | int ret; | |
592 | ||
593 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in"); | |
594 | for (ptr = 0; len > 0; len--, ptr++) { | |
595 | ||
596 | ret = nsp_expect_signal(SCpnt, phase, BUSMON_REQ); | |
597 | if (ret <= 0) { | |
598 | nsp_dbg(NSP_DEBUG_DATA_IO, "xfer quit"); | |
599 | return 0; | |
600 | } | |
601 | ||
602 | /* if last byte, negate ATN */ | |
603 | if (len == 1 && SCpnt->SCp.phase == PH_MSG_OUT) { | |
604 | nsp_index_write(base, SCSIBUSCTRL, AUTODIRECTION | ACKENB); | |
605 | } | |
606 | ||
607 | /* read & write message */ | |
608 | if (phase & BUSMON_IO) { | |
609 | nsp_dbg(NSP_DEBUG_DATA_IO, "read msg"); | |
610 | buf[ptr] = nsp_index_read(base, SCSIDATAWITHACK); | |
611 | } else { | |
612 | nsp_dbg(NSP_DEBUG_DATA_IO, "write msg"); | |
613 | nsp_index_write(base, SCSIDATAWITHACK, buf[ptr]); | |
614 | } | |
615 | nsp_negate_signal(SCpnt, BUSMON_ACK, "xfer<ack>"); | |
616 | ||
617 | } | |
618 | return len; | |
619 | } | |
620 | ||
621 | /* | |
622 | * get extra SCSI data from fifo | |
623 | */ | |
0fc82d5e | 624 | static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
625 | { |
626 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
627 | unsigned int count; | |
628 | ||
629 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in"); | |
630 | ||
631 | if (SCpnt->SCp.have_data_in != IO_IN) { | |
632 | return 0; | |
633 | } | |
634 | ||
635 | count = nsp_fifo_count(SCpnt); | |
636 | if (data->FifoCount == count) { | |
637 | //nsp_dbg(NSP_DEBUG_DATA_IO, "not use bypass quirk"); | |
638 | return 0; | |
639 | } | |
640 | ||
641 | /* | |
642 | * XXX: NSP_QUIRK | |
643 | * data phase skip only occures in case of SCSI_LOW_READ | |
644 | */ | |
645 | nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk"); | |
646 | SCpnt->SCp.phase = PH_DATA; | |
647 | nsp_pio_read(SCpnt); | |
648 | nsp_setup_fifo(data, FALSE); | |
649 | ||
650 | return 0; | |
651 | } | |
652 | ||
653 | /* | |
654 | * accept reselection | |
655 | */ | |
0fc82d5e | 656 | static int nsp_reselected(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
657 | { |
658 | unsigned int base = SCpnt->device->host->io_port; | |
659 | unsigned int host_id = SCpnt->device->host->this_id; | |
660 | //nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
661 | unsigned char bus_reg; | |
662 | unsigned char id_reg, tmp; | |
663 | int target; | |
664 | ||
665 | nsp_dbg(NSP_DEBUG_RESELECTION, "in"); | |
666 | ||
667 | id_reg = nsp_index_read(base, RESELECTID); | |
668 | tmp = id_reg & (~BIT(host_id)); | |
669 | target = 0; | |
670 | while(tmp != 0) { | |
671 | if (tmp & BIT(0)) { | |
672 | break; | |
673 | } | |
674 | tmp >>= 1; | |
675 | target++; | |
676 | } | |
677 | ||
422c0d61 | 678 | if (scmd_id(SCpnt) != target) { |
1da177e4 LT |
679 | nsp_msg(KERN_ERR, "XXX: reselect ID must be %d in this implementation.", target); |
680 | } | |
681 | ||
682 | nsp_negate_signal(SCpnt, BUSMON_SEL, "reselect<SEL>"); | |
683 | ||
684 | nsp_nexus(SCpnt); | |
685 | bus_reg = nsp_index_read(base, SCSIBUSCTRL) & ~(SCSI_BSY | SCSI_ATN); | |
686 | nsp_index_write(base, SCSIBUSCTRL, bus_reg); | |
687 | nsp_index_write(base, SCSIBUSCTRL, bus_reg | AUTODIRECTION | ACKENB); | |
688 | ||
689 | return TRUE; | |
690 | } | |
691 | ||
692 | /* | |
693 | * count how many data transferd | |
694 | */ | |
0fc82d5e | 695 | static int nsp_fifo_count(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
696 | { |
697 | unsigned int base = SCpnt->device->host->io_port; | |
698 | unsigned int count; | |
699 | unsigned int l, m, h, dummy; | |
700 | ||
701 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | ACK_COUNTER); | |
702 | ||
703 | l = nsp_index_read(base, TRANSFERCOUNT); | |
704 | m = nsp_index_read(base, TRANSFERCOUNT); | |
705 | h = nsp_index_read(base, TRANSFERCOUNT); | |
706 | dummy = nsp_index_read(base, TRANSFERCOUNT); /* required this! */ | |
707 | ||
708 | count = (h << 16) | (m << 8) | (l << 0); | |
709 | ||
710 | //nsp_dbg(NSP_DEBUG_DATA_IO, "count=0x%x", count); | |
711 | ||
712 | return count; | |
713 | } | |
714 | ||
715 | /* fifo size */ | |
716 | #define RFIFO_CRIT 64 | |
717 | #define WFIFO_CRIT 64 | |
718 | ||
719 | /* | |
720 | * read data in DATA IN phase | |
721 | */ | |
0fc82d5e | 722 | static void nsp_pio_read(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
723 | { |
724 | unsigned int base = SCpnt->device->host->io_port; | |
725 | unsigned long mmio_base = SCpnt->device->host->base; | |
726 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
727 | long time_out; | |
728 | int ocount, res; | |
729 | unsigned char stat, fifo_stat; | |
730 | ||
731 | ocount = data->FifoCount; | |
732 | ||
733 | nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d", | |
734 | SCpnt, SCpnt->resid, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual); | |
735 | ||
736 | time_out = 1000; | |
737 | ||
738 | while ((time_out-- != 0) && | |
739 | (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0 ) ) { | |
740 | ||
741 | stat = nsp_index_read(base, SCSIBUSMON); | |
742 | stat &= BUSMON_PHASE_MASK; | |
743 | ||
744 | ||
745 | res = nsp_fifo_count(SCpnt) - ocount; | |
746 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res); | |
747 | if (res == 0) { /* if some data avilable ? */ | |
748 | if (stat == BUSPHASE_DATA_IN) { /* phase changed? */ | |
749 | //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual); | |
750 | continue; | |
751 | } else { | |
752 | nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x", stat); | |
753 | break; | |
754 | } | |
755 | } | |
756 | ||
757 | fifo_stat = nsp_read(base, FIFOSTATUS); | |
758 | if ((fifo_stat & FIFOSTATUS_FULL_EMPTY) == 0 && | |
759 | stat == BUSPHASE_DATA_IN) { | |
760 | continue; | |
761 | } | |
762 | ||
763 | res = min(res, SCpnt->SCp.this_residual); | |
764 | ||
765 | switch (data->TransferMode) { | |
766 | case MODE_IO32: | |
767 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
768 | nsp_fifo32_read(base, SCpnt->SCp.ptr, res >> 2); | |
769 | break; | |
770 | case MODE_IO8: | |
771 | nsp_fifo8_read (base, SCpnt->SCp.ptr, res ); | |
772 | break; | |
773 | ||
774 | case MODE_MEM32: | |
775 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
776 | nsp_mmio_fifo32_read(mmio_base, SCpnt->SCp.ptr, res >> 2); | |
777 | break; | |
778 | ||
779 | default: | |
780 | nsp_dbg(NSP_DEBUG_DATA_IO, "unknown read mode"); | |
781 | return; | |
782 | } | |
783 | ||
784 | SCpnt->resid -= res; | |
785 | SCpnt->SCp.ptr += res; | |
786 | SCpnt->SCp.this_residual -= res; | |
787 | ocount += res; | |
788 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this_residual=0x%x ocount=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount); | |
789 | ||
790 | /* go to next scatter list if available */ | |
791 | if (SCpnt->SCp.this_residual == 0 && | |
792 | SCpnt->SCp.buffers_residual != 0 ) { | |
793 | //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next timeout=%d", time_out); | |
794 | SCpnt->SCp.buffers_residual--; | |
795 | SCpnt->SCp.buffer++; | |
796 | SCpnt->SCp.ptr = BUFFER_ADDR; | |
797 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
798 | time_out = 1000; | |
799 | ||
800 | //nsp_dbg(NSP_DEBUG_DATA_IO, "page: 0x%p, off: 0x%x", SCpnt->SCp.buffer->page, SCpnt->SCp.buffer->offset); | |
801 | } | |
802 | } | |
803 | ||
804 | data->FifoCount = ocount; | |
805 | ||
806 | if (time_out == 0) { | |
807 | nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d", | |
808 | SCpnt->resid, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual); | |
809 | } | |
810 | nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount); | |
811 | nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid); | |
812 | } | |
813 | ||
814 | /* | |
815 | * write data in DATA OUT phase | |
816 | */ | |
0fc82d5e | 817 | static void nsp_pio_write(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
818 | { |
819 | unsigned int base = SCpnt->device->host->io_port; | |
820 | unsigned long mmio_base = SCpnt->device->host->base; | |
821 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
822 | int time_out; | |
823 | int ocount, res; | |
824 | unsigned char stat; | |
825 | ||
826 | ocount = data->FifoCount; | |
827 | ||
828 | nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x", | |
829 | data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, SCpnt->resid); | |
830 | ||
831 | time_out = 1000; | |
832 | ||
833 | while ((time_out-- != 0) && | |
834 | (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0)) { | |
835 | stat = nsp_index_read(base, SCSIBUSMON); | |
836 | stat &= BUSMON_PHASE_MASK; | |
837 | ||
838 | if (stat != BUSPHASE_DATA_OUT) { | |
839 | res = ocount - nsp_fifo_count(SCpnt); | |
840 | ||
841 | nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res); | |
842 | /* Put back pointer */ | |
843 | SCpnt->resid += res; | |
844 | SCpnt->SCp.ptr -= res; | |
845 | SCpnt->SCp.this_residual += res; | |
846 | ocount -= res; | |
847 | ||
848 | break; | |
849 | } | |
850 | ||
851 | res = ocount - nsp_fifo_count(SCpnt); | |
852 | if (res > 0) { /* write all data? */ | |
853 | nsp_dbg(NSP_DEBUG_DATA_IO, "wait for all data out. ocount=0x%x res=%d", ocount, res); | |
854 | continue; | |
855 | } | |
856 | ||
857 | res = min(SCpnt->SCp.this_residual, WFIFO_CRIT); | |
858 | ||
859 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, res); | |
860 | switch (data->TransferMode) { | |
861 | case MODE_IO32: | |
862 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
863 | nsp_fifo32_write(base, SCpnt->SCp.ptr, res >> 2); | |
864 | break; | |
865 | case MODE_IO8: | |
866 | nsp_fifo8_write (base, SCpnt->SCp.ptr, res ); | |
867 | break; | |
868 | ||
869 | case MODE_MEM32: | |
870 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
871 | nsp_mmio_fifo32_write(mmio_base, SCpnt->SCp.ptr, res >> 2); | |
872 | break; | |
873 | ||
874 | default: | |
875 | nsp_dbg(NSP_DEBUG_DATA_IO, "unknown write mode"); | |
876 | break; | |
877 | } | |
878 | ||
879 | SCpnt->resid -= res; | |
880 | SCpnt->SCp.ptr += res; | |
881 | SCpnt->SCp.this_residual -= res; | |
882 | ocount += res; | |
883 | ||
884 | /* go to next scatter list if available */ | |
885 | if (SCpnt->SCp.this_residual == 0 && | |
886 | SCpnt->SCp.buffers_residual != 0 ) { | |
887 | //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next"); | |
888 | SCpnt->SCp.buffers_residual--; | |
889 | SCpnt->SCp.buffer++; | |
890 | SCpnt->SCp.ptr = BUFFER_ADDR; | |
891 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
892 | time_out = 1000; | |
893 | } | |
894 | } | |
895 | ||
896 | data->FifoCount = ocount; | |
897 | ||
898 | if (time_out == 0) { | |
899 | nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", SCpnt->resid); | |
900 | } | |
901 | nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount); | |
902 | nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid); | |
903 | } | |
904 | #undef RFIFO_CRIT | |
905 | #undef WFIFO_CRIT | |
906 | ||
907 | /* | |
908 | * setup synchronous/asynchronous data transfer mode | |
909 | */ | |
0fc82d5e | 910 | static int nsp_nexus(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
911 | { |
912 | unsigned int base = SCpnt->device->host->io_port; | |
422c0d61 | 913 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
914 | // unsigned char lun = SCpnt->device->lun; |
915 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
916 | sync_data *sync = &(data->Sync[target]); | |
917 | ||
918 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p", SCpnt); | |
919 | ||
920 | /* setup synch transfer registers */ | |
921 | nsp_index_write(base, SYNCREG, sync->SyncRegister); | |
922 | nsp_index_write(base, ACKWIDTH, sync->AckWidth); | |
923 | ||
924 | if (SCpnt->use_sg == 0 || | |
925 | SCpnt->resid % 4 != 0 || | |
926 | SCpnt->resid <= PAGE_SIZE ) { | |
927 | data->TransferMode = MODE_IO8; | |
928 | } else if (nsp_burst_mode == BURST_MEM32) { | |
929 | data->TransferMode = MODE_MEM32; | |
930 | } else if (nsp_burst_mode == BURST_IO32) { | |
931 | data->TransferMode = MODE_IO32; | |
932 | } else { | |
933 | data->TransferMode = MODE_IO8; | |
934 | } | |
935 | ||
936 | /* setup pdma fifo */ | |
937 | nsp_setup_fifo(data, TRUE); | |
938 | ||
939 | /* clear ack counter */ | |
940 | data->FifoCount = 0; | |
941 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | | |
942 | ACK_COUNTER_CLEAR | | |
943 | REQ_COUNTER_CLEAR | | |
944 | HOST_COUNTER_CLEAR); | |
945 | ||
946 | return 0; | |
947 | } | |
948 | ||
949 | #include "nsp_message.c" | |
950 | /* | |
951 | * interrupt handler | |
952 | */ | |
7d12e780 | 953 | static irqreturn_t nspintr(int irq, void *dev_id) |
1da177e4 LT |
954 | { |
955 | unsigned int base; | |
956 | unsigned char irq_status, irq_phase, phase; | |
0fc82d5e | 957 | struct scsi_cmnd *tmpSC; |
1da177e4 LT |
958 | unsigned char target, lun; |
959 | unsigned int *sync_neg; | |
960 | int i, tmp; | |
961 | nsp_hw_data *data; | |
962 | ||
963 | ||
964 | //nsp_dbg(NSP_DEBUG_INTR, "dev_id=0x%p", dev_id); | |
965 | //nsp_dbg(NSP_DEBUG_INTR, "host=0x%p", ((scsi_info_t *)dev_id)->host); | |
966 | ||
967 | if ( dev_id != NULL && | |
968 | ((scsi_info_t *)dev_id)->host != NULL ) { | |
969 | scsi_info_t *info = (scsi_info_t *)dev_id; | |
970 | ||
971 | data = (nsp_hw_data *)info->host->hostdata; | |
972 | } else { | |
973 | nsp_dbg(NSP_DEBUG_INTR, "host data wrong"); | |
974 | return IRQ_NONE; | |
975 | } | |
976 | ||
977 | //nsp_dbg(NSP_DEBUG_INTR, "&nsp_data_base=0x%p, dev_id=0x%p", &nsp_data_base, dev_id); | |
978 | ||
979 | base = data->BaseAddress; | |
980 | //nsp_dbg(NSP_DEBUG_INTR, "base=0x%x", base); | |
981 | ||
982 | /* | |
983 | * interrupt check | |
984 | */ | |
985 | nsp_write(base, IRQCONTROL, IRQCONTROL_IRQDISABLE); | |
986 | irq_status = nsp_read(base, IRQSTATUS); | |
987 | //nsp_dbg(NSP_DEBUG_INTR, "irq_status=0x%x", irq_status); | |
988 | if ((irq_status == 0xff) || ((irq_status & IRQSTATUS_MASK) == 0)) { | |
989 | nsp_write(base, IRQCONTROL, 0); | |
990 | //nsp_dbg(NSP_DEBUG_INTR, "no irq/shared irq"); | |
991 | return IRQ_NONE; | |
992 | } | |
993 | ||
994 | /* XXX: IMPORTANT | |
995 | * Do not read an irq_phase register if no scsi phase interrupt. | |
996 | * Unless, you should lose a scsi phase interrupt. | |
997 | */ | |
998 | phase = nsp_index_read(base, SCSIBUSMON); | |
999 | if((irq_status & IRQSTATUS_SCSI) != 0) { | |
1000 | irq_phase = nsp_index_read(base, IRQPHASESENCE); | |
1001 | } else { | |
1002 | irq_phase = 0; | |
1003 | } | |
1004 | ||
1005 | //nsp_dbg(NSP_DEBUG_INTR, "irq_phase=0x%x", irq_phase); | |
1006 | ||
1007 | /* | |
1008 | * timer interrupt handler (scsi vs timer interrupts) | |
1009 | */ | |
1010 | //nsp_dbg(NSP_DEBUG_INTR, "timercount=%d", data->TimerCount); | |
1011 | if (data->TimerCount != 0) { | |
1012 | //nsp_dbg(NSP_DEBUG_INTR, "stop timer"); | |
1013 | nsp_index_write(base, TIMERCOUNT, 0); | |
1014 | nsp_index_write(base, TIMERCOUNT, 0); | |
1015 | data->TimerCount = 0; | |
1016 | } | |
1017 | ||
1018 | if ((irq_status & IRQSTATUS_MASK) == IRQSTATUS_TIMER && | |
1019 | data->SelectionTimeOut == 0) { | |
1020 | //nsp_dbg(NSP_DEBUG_INTR, "timer start"); | |
1021 | nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR); | |
1022 | return IRQ_HANDLED; | |
1023 | } | |
1024 | ||
1025 | nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR | IRQCONTROL_FIFO_CLEAR); | |
1026 | ||
1027 | if ((irq_status & IRQSTATUS_SCSI) && | |
1028 | (irq_phase & SCSI_RESET_IRQ)) { | |
1029 | nsp_msg(KERN_ERR, "bus reset (power off?)"); | |
1030 | ||
1031 | nsphw_init(data); | |
1032 | nsp_bus_reset(data); | |
1033 | ||
1034 | if(data->CurrentSC != NULL) { | |
1035 | tmpSC = data->CurrentSC; | |
1036 | tmpSC->result = (DID_RESET << 16) | | |
1037 | ((tmpSC->SCp.Message & 0xff) << 8) | | |
1038 | ((tmpSC->SCp.Status & 0xff) << 0); | |
1039 | nsp_scsi_done(tmpSC); | |
1040 | } | |
1041 | return IRQ_HANDLED; | |
1042 | } | |
1043 | ||
1044 | if (data->CurrentSC == NULL) { | |
1045 | nsp_msg(KERN_ERR, "CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x this can't be happen. reset everything", irq_status, phase, irq_phase); | |
1046 | nsphw_init(data); | |
1047 | nsp_bus_reset(data); | |
1048 | return IRQ_HANDLED; | |
1049 | } | |
1050 | ||
1051 | tmpSC = data->CurrentSC; | |
1052 | target = tmpSC->device->id; | |
1053 | lun = tmpSC->device->lun; | |
1054 | sync_neg = &(data->Sync[target].SyncNegotiation); | |
1055 | ||
1056 | /* | |
1057 | * parse hardware SCSI irq reasons register | |
1058 | */ | |
1059 | if (irq_status & IRQSTATUS_SCSI) { | |
1060 | if (irq_phase & RESELECT_IRQ) { | |
1061 | nsp_dbg(NSP_DEBUG_INTR, "reselect"); | |
1062 | nsp_write(base, IRQCONTROL, IRQCONTROL_RESELECT_CLEAR); | |
1063 | if (nsp_reselected(tmpSC) != FALSE) { | |
1064 | return IRQ_HANDLED; | |
1065 | } | |
1066 | } | |
1067 | ||
1068 | if ((irq_phase & (PHASE_CHANGE_IRQ | LATCHED_BUS_FREE)) == 0) { | |
1069 | return IRQ_HANDLED; | |
1070 | } | |
1071 | } | |
1072 | ||
1073 | //show_phase(tmpSC); | |
1074 | ||
1075 | switch(tmpSC->SCp.phase) { | |
1076 | case PH_SELSTART: | |
1077 | // *sync_neg = SYNC_NOT_YET; | |
1078 | if ((phase & BUSMON_BSY) == 0) { | |
1079 | //nsp_dbg(NSP_DEBUG_INTR, "selection count=%d", data->SelectionTimeOut); | |
1080 | if (data->SelectionTimeOut >= NSP_SELTIMEOUT) { | |
1081 | nsp_dbg(NSP_DEBUG_INTR, "selection time out"); | |
1082 | data->SelectionTimeOut = 0; | |
1083 | nsp_index_write(base, SCSIBUSCTRL, 0); | |
1084 | ||
1085 | tmpSC->result = DID_TIME_OUT << 16; | |
1086 | nsp_scsi_done(tmpSC); | |
1087 | ||
1088 | return IRQ_HANDLED; | |
1089 | } | |
1090 | data->SelectionTimeOut += 1; | |
1091 | nsp_start_timer(tmpSC, 1000/51); | |
1092 | return IRQ_HANDLED; | |
1093 | } | |
1094 | ||
1095 | /* attention assert */ | |
1096 | //nsp_dbg(NSP_DEBUG_INTR, "attention assert"); | |
1097 | data->SelectionTimeOut = 0; | |
1098 | tmpSC->SCp.phase = PH_SELECTED; | |
1099 | nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN); | |
1100 | udelay(1); | |
1101 | nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN | AUTODIRECTION | ACKENB); | |
1102 | return IRQ_HANDLED; | |
1103 | ||
1104 | break; | |
1105 | ||
1106 | case PH_RESELECT: | |
1107 | //nsp_dbg(NSP_DEBUG_INTR, "phase reselect"); | |
1108 | // *sync_neg = SYNC_NOT_YET; | |
1109 | if ((phase & BUSMON_PHASE_MASK) != BUSPHASE_MESSAGE_IN) { | |
1110 | ||
1111 | tmpSC->result = DID_ABORT << 16; | |
1112 | nsp_scsi_done(tmpSC); | |
1113 | return IRQ_HANDLED; | |
1114 | } | |
1115 | /* fall thru */ | |
1116 | default: | |
1117 | if ((irq_status & (IRQSTATUS_SCSI | IRQSTATUS_FIFO)) == 0) { | |
1118 | return IRQ_HANDLED; | |
1119 | } | |
1120 | break; | |
1121 | } | |
1122 | ||
1123 | /* | |
1124 | * SCSI sequencer | |
1125 | */ | |
1126 | //nsp_dbg(NSP_DEBUG_INTR, "start scsi seq"); | |
1127 | ||
1128 | /* normal disconnect */ | |
1129 | if (((tmpSC->SCp.phase == PH_MSG_IN) || (tmpSC->SCp.phase == PH_MSG_OUT)) && | |
1130 | (irq_phase & LATCHED_BUS_FREE) != 0 ) { | |
1131 | nsp_dbg(NSP_DEBUG_INTR, "normal disconnect irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase); | |
1132 | ||
1133 | //*sync_neg = SYNC_NOT_YET; | |
1134 | ||
1135 | if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { /* all command complete and return status */ | |
1136 | tmpSC->result = (DID_OK << 16) | | |
1137 | ((tmpSC->SCp.Message & 0xff) << 8) | | |
1138 | ((tmpSC->SCp.Status & 0xff) << 0); | |
1139 | nsp_dbg(NSP_DEBUG_INTR, "command complete result=0x%x", tmpSC->result); | |
1140 | nsp_scsi_done(tmpSC); | |
1141 | ||
1142 | return IRQ_HANDLED; | |
1143 | } | |
1144 | ||
1145 | return IRQ_HANDLED; | |
1146 | } | |
1147 | ||
1148 | ||
1149 | /* check unexpected bus free state */ | |
1150 | if (phase == 0) { | |
1151 | nsp_msg(KERN_DEBUG, "unexpected bus free. irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase); | |
1152 | ||
1153 | *sync_neg = SYNC_NG; | |
1154 | tmpSC->result = DID_ERROR << 16; | |
1155 | nsp_scsi_done(tmpSC); | |
1156 | return IRQ_HANDLED; | |
1157 | } | |
1158 | ||
1159 | switch (phase & BUSMON_PHASE_MASK) { | |
1160 | case BUSPHASE_COMMAND: | |
1161 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_COMMAND"); | |
1162 | if ((phase & BUSMON_REQ) == 0) { | |
1163 | nsp_dbg(NSP_DEBUG_INTR, "REQ == 0"); | |
1164 | return IRQ_HANDLED; | |
1165 | } | |
1166 | ||
1167 | tmpSC->SCp.phase = PH_COMMAND; | |
1168 | ||
1169 | nsp_nexus(tmpSC); | |
1170 | ||
1171 | /* write scsi command */ | |
1172 | nsp_dbg(NSP_DEBUG_INTR, "cmd_len=%d", tmpSC->cmd_len); | |
1173 | nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER); | |
1174 | for (i = 0; i < tmpSC->cmd_len; i++) { | |
1175 | nsp_index_write(base, COMMANDDATA, tmpSC->cmnd[i]); | |
1176 | } | |
1177 | nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER | AUTO_COMMAND_GO); | |
1178 | break; | |
1179 | ||
1180 | case BUSPHASE_DATA_OUT: | |
1181 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_OUT"); | |
1182 | ||
1183 | tmpSC->SCp.phase = PH_DATA; | |
1184 | tmpSC->SCp.have_data_in = IO_OUT; | |
1185 | ||
1186 | nsp_pio_write(tmpSC); | |
1187 | ||
1188 | break; | |
1189 | ||
1190 | case BUSPHASE_DATA_IN: | |
1191 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_IN"); | |
1192 | ||
1193 | tmpSC->SCp.phase = PH_DATA; | |
1194 | tmpSC->SCp.have_data_in = IO_IN; | |
1195 | ||
1196 | nsp_pio_read(tmpSC); | |
1197 | ||
1198 | break; | |
1199 | ||
1200 | case BUSPHASE_STATUS: | |
1201 | nsp_dataphase_bypass(tmpSC); | |
1202 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_STATUS"); | |
1203 | ||
1204 | tmpSC->SCp.phase = PH_STATUS; | |
1205 | ||
1206 | tmpSC->SCp.Status = nsp_index_read(base, SCSIDATAWITHACK); | |
1207 | nsp_dbg(NSP_DEBUG_INTR, "message=0x%x status=0x%x", tmpSC->SCp.Message, tmpSC->SCp.Status); | |
1208 | ||
1209 | break; | |
1210 | ||
1211 | case BUSPHASE_MESSAGE_OUT: | |
1212 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_OUT"); | |
1213 | if ((phase & BUSMON_REQ) == 0) { | |
1214 | goto timer_out; | |
1215 | } | |
1216 | ||
1217 | tmpSC->SCp.phase = PH_MSG_OUT; | |
1218 | ||
1219 | //*sync_neg = SYNC_NOT_YET; | |
1220 | ||
1221 | data->MsgLen = i = 0; | |
1222 | data->MsgBuffer[i] = IDENTIFY(TRUE, lun); i++; | |
1223 | ||
1224 | if (*sync_neg == SYNC_NOT_YET) { | |
1225 | data->Sync[target].SyncPeriod = 0; | |
1226 | data->Sync[target].SyncOffset = 0; | |
1227 | ||
1228 | /**/ | |
1229 | data->MsgBuffer[i] = MSG_EXTENDED; i++; | |
1230 | data->MsgBuffer[i] = 3; i++; | |
1231 | data->MsgBuffer[i] = MSG_EXT_SDTR; i++; | |
1232 | data->MsgBuffer[i] = 0x0c; i++; | |
1233 | data->MsgBuffer[i] = 15; i++; | |
1234 | /**/ | |
1235 | } | |
1236 | data->MsgLen = i; | |
1237 | ||
1238 | nsp_analyze_sdtr(tmpSC); | |
1239 | show_message(data); | |
1240 | nsp_message_out(tmpSC); | |
1241 | break; | |
1242 | ||
1243 | case BUSPHASE_MESSAGE_IN: | |
1244 | nsp_dataphase_bypass(tmpSC); | |
1245 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_IN"); | |
1246 | if ((phase & BUSMON_REQ) == 0) { | |
1247 | goto timer_out; | |
1248 | } | |
1249 | ||
1250 | tmpSC->SCp.phase = PH_MSG_IN; | |
1251 | nsp_message_in(tmpSC); | |
1252 | ||
1253 | /**/ | |
1254 | if (*sync_neg == SYNC_NOT_YET) { | |
1255 | //nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun); | |
1256 | ||
1257 | if (data->MsgLen >= 5 && | |
1258 | data->MsgBuffer[0] == MSG_EXTENDED && | |
1259 | data->MsgBuffer[1] == 3 && | |
1260 | data->MsgBuffer[2] == MSG_EXT_SDTR ) { | |
1261 | data->Sync[target].SyncPeriod = data->MsgBuffer[3]; | |
1262 | data->Sync[target].SyncOffset = data->MsgBuffer[4]; | |
1263 | //nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]); | |
1264 | *sync_neg = SYNC_OK; | |
1265 | } else { | |
1266 | data->Sync[target].SyncPeriod = 0; | |
1267 | data->Sync[target].SyncOffset = 0; | |
1268 | *sync_neg = SYNC_NG; | |
1269 | } | |
1270 | nsp_analyze_sdtr(tmpSC); | |
1271 | } | |
1272 | /**/ | |
1273 | ||
1274 | /* search last messeage byte */ | |
1275 | tmp = -1; | |
1276 | for (i = 0; i < data->MsgLen; i++) { | |
1277 | tmp = data->MsgBuffer[i]; | |
1278 | if (data->MsgBuffer[i] == MSG_EXTENDED) { | |
1279 | i += (1 + data->MsgBuffer[i+1]); | |
1280 | } | |
1281 | } | |
1282 | tmpSC->SCp.Message = tmp; | |
1283 | ||
1284 | nsp_dbg(NSP_DEBUG_INTR, "message=0x%x len=%d", tmpSC->SCp.Message, data->MsgLen); | |
1285 | show_message(data); | |
1286 | ||
1287 | break; | |
1288 | ||
1289 | case BUSPHASE_SELECT: | |
1290 | default: | |
1291 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE other"); | |
1292 | ||
1293 | break; | |
1294 | } | |
1295 | ||
1296 | //nsp_dbg(NSP_DEBUG_INTR, "out"); | |
1297 | return IRQ_HANDLED; | |
1298 | ||
1299 | timer_out: | |
1300 | nsp_start_timer(tmpSC, 1000/102); | |
1301 | return IRQ_HANDLED; | |
1302 | } | |
1303 | ||
1304 | #ifdef NSP_DEBUG | |
1305 | #include "nsp_debug.c" | |
1306 | #endif /* NSP_DEBUG */ | |
1307 | ||
1308 | /*----------------------------------------------------------------*/ | |
1309 | /* look for ninja3 card and init if found */ | |
1310 | /*----------------------------------------------------------------*/ | |
d0be4a7d | 1311 | static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht) |
1da177e4 LT |
1312 | { |
1313 | struct Scsi_Host *host; /* registered host structure */ | |
1314 | nsp_hw_data *data_b = &nsp_data_base, *data; | |
1315 | ||
1316 | nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id); | |
1317 | #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) | |
1318 | host = scsi_host_alloc(&nsp_driver_template, sizeof(nsp_hw_data)); | |
1319 | #else | |
1320 | host = scsi_register(sht, sizeof(nsp_hw_data)); | |
1321 | #endif | |
1322 | if (host == NULL) { | |
1323 | nsp_dbg(NSP_DEBUG_INIT, "host failed"); | |
1324 | return NULL; | |
1325 | } | |
1326 | ||
1327 | memcpy(host->hostdata, data_b, sizeof(nsp_hw_data)); | |
1328 | data = (nsp_hw_data *)host->hostdata; | |
1329 | data->ScsiInfo->host = host; | |
1330 | #ifdef NSP_DEBUG | |
1331 | data->CmdId = 0; | |
1332 | #endif | |
1333 | ||
1334 | nsp_dbg(NSP_DEBUG_INIT, "irq=%d,%d", data_b->IrqNumber, ((nsp_hw_data *)host->hostdata)->IrqNumber); | |
1335 | ||
1336 | host->unique_id = data->BaseAddress; | |
1337 | host->io_port = data->BaseAddress; | |
1338 | host->n_io_port = data->NumAddress; | |
1339 | host->irq = data->IrqNumber; | |
1340 | host->base = data->MmioAddress; | |
1341 | ||
1342 | spin_lock_init(&(data->Lock)); | |
1343 | ||
1344 | snprintf(data->nspinfo, | |
1345 | sizeof(data->nspinfo), | |
1346 | "NinjaSCSI-3/32Bi Driver $Revision: 1.23 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d", | |
1347 | host->io_port, host->io_port + host->n_io_port - 1, | |
1348 | host->base, | |
1349 | host->irq); | |
1350 | sht->name = data->nspinfo; | |
1351 | ||
1352 | nsp_dbg(NSP_DEBUG_INIT, "end"); | |
1353 | ||
1354 | ||
1355 | return host; /* detect done. */ | |
1356 | } | |
1357 | ||
1358 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) | |
d0be4a7d | 1359 | static int nsp_detect_old(struct scsi_host_template *sht) |
1da177e4 LT |
1360 | { |
1361 | if (nsp_detect(sht) == NULL) { | |
1362 | return 0; | |
1363 | } else { | |
1364 | //MOD_INC_USE_COUNT; | |
1365 | return 1; | |
1366 | } | |
1367 | } | |
1368 | ||
1369 | ||
1370 | static int nsp_release_old(struct Scsi_Host *shpnt) | |
1371 | { | |
1372 | //nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata; | |
1373 | ||
1374 | /* PCMCIA Card Service dose same things below. */ | |
1375 | /* So we do nothing. */ | |
1376 | //if (shpnt->irq) { | |
1377 | // free_irq(shpnt->irq, data->ScsiInfo); | |
1378 | //} | |
1379 | //if (shpnt->io_port) { | |
1380 | // release_region(shpnt->io_port, shpnt->n_io_port); | |
1381 | //} | |
1382 | ||
1383 | //MOD_DEC_USE_COUNT; | |
1384 | ||
1385 | return 0; | |
1386 | } | |
1387 | #endif | |
1388 | ||
1389 | /*----------------------------------------------------------------*/ | |
1390 | /* return info string */ | |
1391 | /*----------------------------------------------------------------*/ | |
1392 | static const char *nsp_info(struct Scsi_Host *shpnt) | |
1393 | { | |
1394 | nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata; | |
1395 | ||
1396 | return data->nspinfo; | |
1397 | } | |
1398 | ||
1399 | #undef SPRINTF | |
1400 | #define SPRINTF(args...) \ | |
1401 | do { \ | |
1402 | if(length > (pos - buffer)) { \ | |
1403 | pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \ | |
1404 | nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\ | |
1405 | } \ | |
1406 | } while(0) | |
1407 | static int | |
1408 | nsp_proc_info( | |
1409 | #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) | |
1410 | struct Scsi_Host *host, | |
1411 | #endif | |
1412 | char *buffer, | |
1413 | char **start, | |
1414 | off_t offset, | |
1415 | int length, | |
1416 | #if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) | |
1417 | int hostno, | |
1418 | #endif | |
1419 | int inout) | |
1420 | { | |
1421 | int id; | |
1422 | char *pos = buffer; | |
1423 | int thislength; | |
1424 | int speed; | |
1425 | unsigned long flags; | |
1426 | nsp_hw_data *data; | |
1427 | #if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) | |
1428 | struct Scsi_Host *host; | |
1429 | #else | |
1430 | int hostno; | |
1431 | #endif | |
1432 | if (inout) { | |
1433 | return -EINVAL; | |
1434 | } | |
1435 | ||
1436 | #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) | |
1437 | hostno = host->host_no; | |
1438 | #else | |
1439 | /* search this HBA host */ | |
1440 | host = scsi_host_hn_get(hostno); | |
1441 | if (host == NULL) { | |
1442 | return -ESRCH; | |
1443 | } | |
1444 | #endif | |
1445 | data = (nsp_hw_data *)host->hostdata; | |
1446 | ||
1447 | ||
1448 | SPRINTF("NinjaSCSI status\n\n"); | |
1449 | SPRINTF("Driver version: $Revision: 1.23 $\n"); | |
1450 | SPRINTF("SCSI host No.: %d\n", hostno); | |
1451 | SPRINTF("IRQ: %d\n", host->irq); | |
1452 | SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); | |
1453 | SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); | |
1454 | SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); | |
1455 | ||
1456 | SPRINTF("burst transfer mode: "); | |
1457 | switch (nsp_burst_mode) { | |
1458 | case BURST_IO8: | |
1459 | SPRINTF("io8"); | |
1460 | break; | |
1461 | case BURST_IO32: | |
1462 | SPRINTF("io32"); | |
1463 | break; | |
1464 | case BURST_MEM32: | |
1465 | SPRINTF("mem32"); | |
1466 | break; | |
1467 | default: | |
1468 | SPRINTF("???"); | |
1469 | break; | |
1470 | } | |
1471 | SPRINTF("\n"); | |
1472 | ||
1473 | ||
1474 | spin_lock_irqsave(&(data->Lock), flags); | |
1475 | SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); | |
1476 | spin_unlock_irqrestore(&(data->Lock), flags); | |
1477 | ||
1478 | SPRINTF("SDTR status\n"); | |
1479 | for(id = 0; id < ARRAY_SIZE(data->Sync); id++) { | |
1480 | ||
1481 | SPRINTF("id %d: ", id); | |
1482 | ||
1483 | if (id == host->this_id) { | |
1484 | SPRINTF("----- NinjaSCSI-3 host adapter\n"); | |
1485 | continue; | |
1486 | } | |
1487 | ||
1488 | switch(data->Sync[id].SyncNegotiation) { | |
1489 | case SYNC_OK: | |
1490 | SPRINTF(" sync"); | |
1491 | break; | |
1492 | case SYNC_NG: | |
1493 | SPRINTF("async"); | |
1494 | break; | |
1495 | case SYNC_NOT_YET: | |
1496 | SPRINTF(" none"); | |
1497 | break; | |
1498 | default: | |
1499 | SPRINTF("?????"); | |
1500 | break; | |
1501 | } | |
1502 | ||
1503 | if (data->Sync[id].SyncPeriod != 0) { | |
1504 | speed = 1000000 / (data->Sync[id].SyncPeriod * 4); | |
1505 | ||
1506 | SPRINTF(" transfer %d.%dMB/s, offset %d", | |
1507 | speed / 1000, | |
1508 | speed % 1000, | |
1509 | data->Sync[id].SyncOffset | |
1510 | ); | |
1511 | } | |
1512 | SPRINTF("\n"); | |
1513 | } | |
1514 | ||
1515 | thislength = pos - (buffer + offset); | |
1516 | ||
1517 | if(thislength < 0) { | |
1518 | *start = NULL; | |
1519 | return 0; | |
1520 | } | |
1521 | ||
1522 | ||
1523 | thislength = min(thislength, length); | |
1524 | *start = buffer + offset; | |
1525 | ||
1526 | return thislength; | |
1527 | } | |
1528 | #undef SPRINTF | |
1529 | ||
1530 | /*---------------------------------------------------------------*/ | |
1531 | /* error handler */ | |
1532 | /*---------------------------------------------------------------*/ | |
1533 | ||
1da177e4 | 1534 | /* |
0fc82d5e | 1535 | static int nsp_eh_abort(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1536 | { |
1537 | nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt); | |
1538 | ||
1539 | return nsp_eh_bus_reset(SCpnt); | |
1540 | }*/ | |
1541 | ||
1da177e4 LT |
1542 | static int nsp_bus_reset(nsp_hw_data *data) |
1543 | { | |
1544 | unsigned int base = data->BaseAddress; | |
1545 | int i; | |
1546 | ||
1547 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK); | |
1548 | ||
1549 | nsp_index_write(base, SCSIBUSCTRL, SCSI_RST); | |
1550 | mdelay(100); /* 100ms */ | |
1551 | nsp_index_write(base, SCSIBUSCTRL, 0); | |
1552 | for(i = 0; i < 5; i++) { | |
1553 | nsp_index_read(base, IRQPHASESENCE); /* dummy read */ | |
1554 | } | |
1555 | ||
1556 | nsphw_init_sync(data); | |
1557 | ||
1558 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR); | |
1559 | ||
1560 | return SUCCESS; | |
1561 | } | |
1562 | ||
0fc82d5e | 1563 | static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1564 | { |
1565 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
1566 | ||
1567 | nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt); | |
1568 | ||
1569 | return nsp_bus_reset(data); | |
1570 | } | |
1571 | ||
0fc82d5e | 1572 | static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1573 | { |
1574 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
1575 | ||
1576 | nsp_dbg(NSP_DEBUG_BUSRESET, "in"); | |
1577 | ||
1578 | nsphw_init(data); | |
1579 | ||
1580 | return SUCCESS; | |
1581 | } | |
1582 | ||
1583 | ||
1584 | /********************************************************************** | |
1585 | PCMCIA functions | |
1586 | **********************************************************************/ | |
1587 | ||
1588 | /*====================================================================== | |
1589 | nsp_cs_attach() creates an "instance" of the driver, allocating | |
1590 | local data structures for one device. The device is registered | |
1591 | with Card Services. | |
1592 | ||
1593 | The dev_link structure is initialized, but we don't actually | |
1594 | configure the card at this point -- we wait until we receive a | |
1595 | card insertion event. | |
1596 | ======================================================================*/ | |
15b99ac1 | 1597 | static int nsp_cs_probe(struct pcmcia_device *link) |
1da177e4 LT |
1598 | { |
1599 | scsi_info_t *info; | |
1da177e4 | 1600 | nsp_hw_data *data = &nsp_data_base; |
15b99ac1 | 1601 | int ret; |
1da177e4 LT |
1602 | |
1603 | nsp_dbg(NSP_DEBUG_INIT, "in"); | |
1604 | ||
1605 | /* Create new SCSI device */ | |
1606 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
f8cfa618 | 1607 | if (info == NULL) { return -ENOMEM; } |
1da177e4 | 1608 | memset(info, 0, sizeof(*info)); |
fba395ee | 1609 | info->p_dev = link; |
1da177e4 LT |
1610 | link->priv = info; |
1611 | data->ScsiInfo = info; | |
1612 | ||
1613 | nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); | |
1614 | ||
1615 | /* The io structure describes IO port mapping */ | |
1616 | link->io.NumPorts1 = 0x10; | |
1617 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
1618 | link->io.IOAddrLines = 10; /* not used */ | |
1619 | ||
1620 | /* Interrupt setup */ | |
1621 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; | |
1622 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
1623 | ||
1624 | /* Interrupt handler */ | |
1625 | link->irq.Handler = &nspintr; | |
1626 | link->irq.Instance = info; | |
c4e00fac | 1627 | link->irq.Attributes |= IRQF_SHARED; |
1da177e4 LT |
1628 | |
1629 | /* General socket configuration */ | |
1630 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
1da177e4 LT |
1631 | link->conf.IntType = INT_MEMORY_AND_IO; |
1632 | link->conf.Present = PRESENT_OPTION; | |
1633 | ||
15b99ac1 | 1634 | ret = nsp_cs_config(link); |
1da177e4 LT |
1635 | |
1636 | nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); | |
15b99ac1 | 1637 | return ret; |
1da177e4 LT |
1638 | } /* nsp_cs_attach */ |
1639 | ||
1640 | ||
1641 | /*====================================================================== | |
1642 | This deletes a driver "instance". The device is de-registered | |
1643 | with Card Services. If it has been released, all local data | |
1644 | structures are freed. Otherwise, the structures will be freed | |
1645 | when the device is released. | |
1646 | ======================================================================*/ | |
fba395ee | 1647 | static void nsp_cs_detach(struct pcmcia_device *link) |
1da177e4 | 1648 | { |
1da177e4 LT |
1649 | nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); |
1650 | ||
e2d40963 DB |
1651 | ((scsi_info_t *)link->priv)->stop = 1; |
1652 | nsp_cs_release(link); | |
1da177e4 | 1653 | |
1da177e4 LT |
1654 | kfree(link->priv); |
1655 | link->priv = NULL; | |
1da177e4 LT |
1656 | } /* nsp_cs_detach */ |
1657 | ||
1658 | ||
1659 | /*====================================================================== | |
1660 | nsp_cs_config() is scheduled to run after a CARD_INSERTION event | |
1661 | is received, to configure the PCMCIA socket, and to make the | |
1662 | ethernet device available to the system. | |
1663 | ======================================================================*/ | |
1664 | #define CS_CHECK(fn, ret) \ | |
1665 | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | |
1666 | /*====================================================================*/ | |
15b99ac1 | 1667 | static int nsp_cs_config(struct pcmcia_device *link) |
1da177e4 | 1668 | { |
15b99ac1 | 1669 | int ret; |
1da177e4 LT |
1670 | scsi_info_t *info = link->priv; |
1671 | tuple_t tuple; | |
1672 | cisparse_t parse; | |
1673 | int last_ret, last_fn; | |
1674 | unsigned char tuple_data[64]; | |
1675 | config_info_t conf; | |
1676 | win_req_t req; | |
1677 | memreq_t map; | |
1678 | cistpl_cftable_entry_t dflt = { 0 }; | |
1679 | struct Scsi_Host *host; | |
1680 | nsp_hw_data *data = &nsp_data_base; | |
1681 | #if !(LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74)) | |
f64a181d | 1682 | struct scsi_device *dev; |
1da177e4 LT |
1683 | dev_node_t **tail, *node; |
1684 | #endif | |
1685 | ||
1686 | nsp_dbg(NSP_DEBUG_INIT, "in"); | |
1687 | ||
1688 | tuple.DesiredTuple = CISTPL_CONFIG; | |
1689 | tuple.Attributes = 0; | |
1690 | tuple.TupleData = tuple_data; | |
1691 | tuple.TupleDataMax = sizeof(tuple_data); | |
1692 | tuple.TupleOffset = 0; | |
fba395ee DB |
1693 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
1694 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); | |
1695 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); | |
1da177e4 LT |
1696 | link->conf.ConfigBase = parse.config.base; |
1697 | link->conf.Present = parse.config.rmask[0]; | |
1698 | ||
1da177e4 | 1699 | /* Look up the current Vcc */ |
fba395ee | 1700 | CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); |
1da177e4 LT |
1701 | |
1702 | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 1703 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
1da177e4 LT |
1704 | while (1) { |
1705 | cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); | |
1706 | ||
fba395ee DB |
1707 | if (pcmcia_get_tuple_data(link, &tuple) != 0 || |
1708 | pcmcia_parse_tuple(link, &tuple, &parse) != 0) | |
1da177e4 LT |
1709 | goto next_entry; |
1710 | ||
1711 | if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; } | |
1712 | if (cfg->index == 0) { goto next_entry; } | |
1713 | link->conf.ConfigIndex = cfg->index; | |
1714 | ||
1715 | /* Does this card need audio output? */ | |
1716 | if (cfg->flags & CISTPL_CFTABLE_AUDIO) { | |
1717 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
1718 | link->conf.Status = CCSR_AUDIO_ENA; | |
1719 | } | |
1720 | ||
1721 | /* Use power settings for Vcc and Vpp if present */ | |
1722 | /* Note that the CIS values need to be rescaled */ | |
1723 | if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { | |
1724 | if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) { | |
1725 | goto next_entry; | |
1726 | } | |
1727 | } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { | |
1728 | if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) { | |
1729 | goto next_entry; | |
1730 | } | |
1731 | } | |
1732 | ||
1733 | if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { | |
70294b46 | 1734 | link->conf.Vpp = |
1da177e4 LT |
1735 | cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
1736 | } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) { | |
70294b46 | 1737 | link->conf.Vpp = |
1da177e4 LT |
1738 | dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; |
1739 | } | |
1740 | ||
1741 | /* Do we need to allocate an interrupt? */ | |
1742 | if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) { | |
1743 | link->conf.Attributes |= CONF_ENABLE_IRQ; | |
1744 | } | |
1745 | ||
1746 | /* IO window settings */ | |
1747 | link->io.NumPorts1 = link->io.NumPorts2 = 0; | |
1748 | if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { | |
1749 | cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; | |
1750 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
1751 | if (!(io->flags & CISTPL_IO_8BIT)) | |
1752 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; | |
1753 | if (!(io->flags & CISTPL_IO_16BIT)) | |
1754 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
1755 | link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; | |
1756 | link->io.BasePort1 = io->win[0].base; | |
1757 | link->io.NumPorts1 = io->win[0].len; | |
1758 | if (io->nwin > 1) { | |
1759 | link->io.Attributes2 = link->io.Attributes1; | |
1760 | link->io.BasePort2 = io->win[1].base; | |
1761 | link->io.NumPorts2 = io->win[1].len; | |
1762 | } | |
1763 | /* This reserves IO space but doesn't actually enable it */ | |
fba395ee | 1764 | if (pcmcia_request_io(link, &link->io) != 0) |
1da177e4 LT |
1765 | goto next_entry; |
1766 | } | |
1767 | ||
1768 | if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { | |
1769 | cistpl_mem_t *mem = | |
1770 | (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; | |
1771 | req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; | |
1772 | req.Attributes |= WIN_ENABLE; | |
1773 | req.Base = mem->win[0].host_addr; | |
1774 | req.Size = mem->win[0].len; | |
1775 | if (req.Size < 0x1000) { | |
1776 | req.Size = 0x1000; | |
1777 | } | |
1778 | req.AccessSpeed = 0; | |
fba395ee | 1779 | if (pcmcia_request_window(&link, &req, &link->win) != 0) |
1da177e4 LT |
1780 | goto next_entry; |
1781 | map.Page = 0; map.CardOffset = mem->win[0].card_addr; | |
1782 | if (pcmcia_map_mem_page(link->win, &map) != 0) | |
1783 | goto next_entry; | |
1784 | ||
1785 | data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size); | |
1786 | data->MmioLength = req.Size; | |
1787 | } | |
1788 | /* If we got this far, we're cool! */ | |
1789 | break; | |
1790 | ||
1791 | next_entry: | |
1792 | nsp_dbg(NSP_DEBUG_INIT, "next"); | |
fba395ee DB |
1793 | pcmcia_disable_device(link); |
1794 | CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); | |
1da177e4 LT |
1795 | } |
1796 | ||
1797 | if (link->conf.Attributes & CONF_ENABLE_IRQ) { | |
fba395ee | 1798 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
1da177e4 | 1799 | } |
fba395ee | 1800 | CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
1da177e4 LT |
1801 | |
1802 | if (free_ports) { | |
1803 | if (link->io.BasePort1) { | |
1804 | release_region(link->io.BasePort1, link->io.NumPorts1); | |
1805 | } | |
1806 | if (link->io.BasePort2) { | |
1807 | release_region(link->io.BasePort2, link->io.NumPorts2); | |
1808 | } | |
1809 | } | |
1810 | ||
1811 | /* Set port and IRQ */ | |
1812 | data->BaseAddress = link->io.BasePort1; | |
1813 | data->NumAddress = link->io.NumPorts1; | |
1814 | data->IrqNumber = link->irq.AssignedIRQ; | |
1815 | ||
1816 | nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", | |
1817 | data->BaseAddress, data->NumAddress, data->IrqNumber); | |
1818 | ||
1819 | if(nsphw_init(data) == FALSE) { | |
1820 | goto cs_failed; | |
1821 | } | |
1822 | ||
1823 | #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2)) | |
1824 | host = nsp_detect(&nsp_driver_template); | |
1825 | #else | |
1826 | scsi_register_host(&nsp_driver_template); | |
1827 | for (host = scsi_host_get_next(NULL); host != NULL; | |
1828 | host = scsi_host_get_next(host)) { | |
1829 | if (host->hostt == &nsp_driver_template) { | |
1830 | break; | |
1831 | } | |
1832 | } | |
1833 | #endif | |
1834 | ||
1835 | if (host == NULL) { | |
1836 | nsp_dbg(NSP_DEBUG_INIT, "detect failed"); | |
1837 | goto cs_failed; | |
1838 | } | |
1839 | ||
1840 | ||
1841 | #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74)) | |
15b99ac1 DB |
1842 | ret = scsi_add_host (host, NULL); |
1843 | if (ret) | |
1844 | goto cs_failed; | |
1845 | ||
1da177e4 LT |
1846 | scsi_scan_host(host); |
1847 | ||
1848 | snprintf(info->node.dev_name, sizeof(info->node.dev_name), "scsi%d", host->host_no); | |
fd238232 | 1849 | link->dev_node = &info->node; |
1da177e4 LT |
1850 | info->host = host; |
1851 | ||
1852 | #else | |
1853 | nsp_dbg(NSP_DEBUG_INIT, "GET_SCSI_INFO"); | |
fd238232 | 1854 | tail = &link->dev_node; |
1da177e4 LT |
1855 | info->ndev = 0; |
1856 | ||
1857 | nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host); | |
1858 | ||
1859 | for (dev = host->host_queue; dev != NULL; dev = dev->next) { | |
1860 | unsigned long id; | |
1861 | id = (dev->id & 0x0f) + ((dev->lun & 0x0f) << 4) + | |
1862 | ((dev->channel & 0x0f) << 8) + | |
1863 | ((dev->host->host_no & 0x0f) << 12); | |
1864 | node = &info->node[info->ndev]; | |
1865 | node->minor = 0; | |
1866 | switch (dev->type) { | |
1867 | case TYPE_TAPE: | |
1868 | node->major = SCSI_TAPE_MAJOR; | |
1869 | snprintf(node->dev_name, sizeof(node->dev_name), "st#%04lx", id); | |
1870 | break; | |
1871 | case TYPE_DISK: | |
1872 | case TYPE_MOD: | |
1873 | node->major = SCSI_DISK0_MAJOR; | |
1874 | snprintf(node->dev_name, sizeof(node->dev_name), "sd#%04lx", id); | |
1875 | break; | |
1876 | case TYPE_ROM: | |
1877 | case TYPE_WORM: | |
1878 | node->major = SCSI_CDROM_MAJOR; | |
1879 | snprintf(node->dev_name, sizeof(node->dev_name), "sr#%04lx", id); | |
1880 | break; | |
1881 | default: | |
1882 | node->major = SCSI_GENERIC_MAJOR; | |
1883 | snprintf(node->dev_name, sizeof(node->dev_name), "sg#%04lx", id); | |
1884 | break; | |
1885 | } | |
1886 | *tail = node; tail = &node->next; | |
1887 | info->ndev++; | |
1888 | info->host = dev->host; | |
1889 | } | |
1890 | ||
1891 | *tail = NULL; | |
1892 | if (info->ndev == 0) { | |
1893 | nsp_msg(KERN_INFO, "no SCSI devices found"); | |
1894 | } | |
1895 | nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host); | |
1896 | #endif | |
1897 | ||
1898 | /* Finally, report what we've done */ | |
70294b46 DB |
1899 | printk(KERN_INFO "nsp_cs: index 0x%02x: ", |
1900 | link->conf.ConfigIndex); | |
1901 | if (link->conf.Vpp) { | |
1902 | printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); | |
1da177e4 LT |
1903 | } |
1904 | if (link->conf.Attributes & CONF_ENABLE_IRQ) { | |
1905 | printk(", irq %d", link->irq.AssignedIRQ); | |
1906 | } | |
1907 | if (link->io.NumPorts1) { | |
1908 | printk(", io 0x%04x-0x%04x", link->io.BasePort1, | |
1909 | link->io.BasePort1+link->io.NumPorts1-1); | |
1910 | } | |
1911 | if (link->io.NumPorts2) | |
1912 | printk(" & 0x%04x-0x%04x", link->io.BasePort2, | |
1913 | link->io.BasePort2+link->io.NumPorts2-1); | |
1914 | if (link->win) | |
1915 | printk(", mem 0x%06lx-0x%06lx", req.Base, | |
1916 | req.Base+req.Size-1); | |
1917 | printk("\n"); | |
1918 | ||
15b99ac1 | 1919 | return 0; |
1da177e4 LT |
1920 | |
1921 | cs_failed: | |
1922 | nsp_dbg(NSP_DEBUG_INIT, "config fail"); | |
fba395ee | 1923 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
1924 | nsp_cs_release(link); |
1925 | ||
15b99ac1 | 1926 | return -ENODEV; |
1da177e4 LT |
1927 | } /* nsp_cs_config */ |
1928 | #undef CS_CHECK | |
1929 | ||
1930 | ||
1931 | /*====================================================================== | |
1932 | After a card is removed, nsp_cs_release() will unregister the net | |
1933 | device, and release the PCMCIA configuration. If the device is | |
1934 | still open, this will be postponed until it is closed. | |
1935 | ======================================================================*/ | |
fba395ee | 1936 | static void nsp_cs_release(struct pcmcia_device *link) |
1da177e4 LT |
1937 | { |
1938 | scsi_info_t *info = link->priv; | |
1939 | nsp_hw_data *data = NULL; | |
1940 | ||
1941 | if (info->host == NULL) { | |
1942 | nsp_msg(KERN_DEBUG, "unexpected card release call."); | |
1943 | } else { | |
1944 | data = (nsp_hw_data *)info->host->hostdata; | |
1945 | } | |
1946 | ||
1947 | nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); | |
1948 | ||
1949 | /* Unlink the device chain */ | |
1950 | #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2)) | |
1951 | if (info->host != NULL) { | |
1952 | scsi_remove_host(info->host); | |
1953 | } | |
1954 | #else | |
1955 | scsi_unregister_host(&nsp_driver_template); | |
1956 | #endif | |
fd238232 | 1957 | link->dev_node = NULL; |
1da177e4 LT |
1958 | |
1959 | if (link->win) { | |
1960 | if (data != NULL) { | |
1961 | iounmap((void *)(data->MmioAddress)); | |
1962 | } | |
1da177e4 | 1963 | } |
fba395ee | 1964 | pcmcia_disable_device(link); |
5f2a71fc | 1965 | |
1da177e4 LT |
1966 | #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2)) |
1967 | if (info->host != NULL) { | |
1968 | scsi_host_put(info->host); | |
1969 | } | |
1970 | #endif | |
1971 | } /* nsp_cs_release */ | |
1972 | ||
fba395ee | 1973 | static int nsp_cs_suspend(struct pcmcia_device *link) |
98e4c28b | 1974 | { |
98e4c28b DB |
1975 | scsi_info_t *info = link->priv; |
1976 | nsp_hw_data *data; | |
1977 | ||
98e4c28b DB |
1978 | nsp_dbg(NSP_DEBUG_INIT, "event: suspend"); |
1979 | ||
1980 | if (info->host != NULL) { | |
1981 | nsp_msg(KERN_INFO, "clear SDTR status"); | |
1982 | ||
1983 | data = (nsp_hw_data *)info->host->hostdata; | |
1984 | ||
1985 | nsphw_init_sync(data); | |
1986 | } | |
1987 | ||
1988 | info->stop = 1; | |
1989 | ||
98e4c28b DB |
1990 | return 0; |
1991 | } | |
1992 | ||
fba395ee | 1993 | static int nsp_cs_resume(struct pcmcia_device *link) |
98e4c28b | 1994 | { |
98e4c28b DB |
1995 | scsi_info_t *info = link->priv; |
1996 | nsp_hw_data *data; | |
1997 | ||
1998 | nsp_dbg(NSP_DEBUG_INIT, "event: resume"); | |
1999 | ||
98e4c28b DB |
2000 | info->stop = 0; |
2001 | ||
2002 | if (info->host != NULL) { | |
2003 | nsp_msg(KERN_INFO, "reset host and bus"); | |
2004 | ||
2005 | data = (nsp_hw_data *)info->host->hostdata; | |
2006 | ||
2007 | nsphw_init (data); | |
2008 | nsp_bus_reset(data); | |
2009 | } | |
2010 | ||
2011 | return 0; | |
2012 | } | |
2013 | ||
1da177e4 LT |
2014 | /*======================================================================* |
2015 | * module entry point | |
2016 | *====================================================================*/ | |
2017 | #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68)) | |
aba14100 DB |
2018 | static struct pcmcia_device_id nsp_cs_ids[] = { |
2019 | PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16 ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a), | |
2020 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a), | |
2021 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-002", "1", 0x534c02bc, 0xcb09d5b2, 0x51de003a), | |
2022 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-003", "1", 0x534c02bc, 0xbc0ee524, 0x51de003a), | |
2023 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-004", "1", 0x534c02bc, 0x226a7087, 0x51de003a), | |
2024 | PCMCIA_DEVICE_PROD_ID123("WBT", "NinjaSCSI-3", "R1.0", 0xc7ba805f, 0xfdc7c97d, 0x6973710e), | |
2025 | PCMCIA_DEVICE_PROD_ID123("WORKBIT", "UltraNinja-16", "1", 0x28191418, 0xb70f4b09, 0x51de003a), | |
2026 | PCMCIA_DEVICE_NULL | |
2027 | }; | |
2028 | MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); | |
2029 | ||
1da177e4 | 2030 | static struct pcmcia_driver nsp_driver = { |
1e212f36 DB |
2031 | .owner = THIS_MODULE, |
2032 | .drv = { | |
2033 | .name = "nsp_cs", | |
1da177e4 | 2034 | }, |
15b99ac1 | 2035 | .probe = nsp_cs_probe, |
cc3b4866 | 2036 | .remove = nsp_cs_detach, |
aba14100 | 2037 | .id_table = nsp_cs_ids, |
98e4c28b DB |
2038 | .suspend = nsp_cs_suspend, |
2039 | .resume = nsp_cs_resume, | |
1da177e4 LT |
2040 | }; |
2041 | #endif | |
2042 | ||
2043 | static int __init nsp_cs_init(void) | |
2044 | { | |
2045 | #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68)) | |
2046 | nsp_msg(KERN_INFO, "loading..."); | |
2047 | ||
2048 | return pcmcia_register_driver(&nsp_driver); | |
2049 | #else | |
2050 | servinfo_t serv; | |
2051 | ||
2052 | nsp_msg(KERN_INFO, "loading..."); | |
2053 | pcmcia_get_card_services_info(&serv); | |
2ffe6e28 PR |
2054 | if (serv.Revision != CS_RELEASE_CODE) { |
2055 | nsp_msg(KERN_DEBUG, "Card Services release does not match!"); | |
2056 | return -EINVAL; | |
2057 | } | |
1da177e4 LT |
2058 | register_pcmcia_driver(&dev_info, &nsp_cs_attach, &nsp_cs_detach); |
2059 | ||
2060 | nsp_dbg(NSP_DEBUG_INIT, "out"); | |
2061 | return 0; | |
2062 | #endif | |
2063 | } | |
2064 | ||
2065 | static void __exit nsp_cs_exit(void) | |
2066 | { | |
2067 | nsp_msg(KERN_INFO, "unloading..."); | |
1da177e4 | 2068 | pcmcia_unregister_driver(&nsp_driver); |
1da177e4 LT |
2069 | } |
2070 | ||
2071 | ||
2072 | module_init(nsp_cs_init) | |
2073 | module_exit(nsp_cs_exit) | |
2074 | ||
2075 | /* end */ |