]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * sd.c Copyright (C) 1992 Drew Eckhardt | |
3 | * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale | |
4 | * | |
5 | * Linux scsi disk driver | |
6 | * Initial versions: Drew Eckhardt | |
7 | * Subsequent revisions: Eric Youngdale | |
8 | * Modification history: | |
9 | * - Drew Eckhardt <drew@colorado.edu> original | |
10 | * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple | |
11 | * outstanding request, and other enhancements. | |
12 | * Support loadable low-level scsi drivers. | |
13 | * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using | |
14 | * eight major numbers. | |
15 | * - Richard Gooch <rgooch@atnf.csiro.au> support devfs. | |
16 | * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in | |
17 | * sd_init and cleanups. | |
18 | * - Alex Davis <letmein@erols.com> Fix problem where partition info | |
19 | * not being read in sd_open. Fix problem where removable media | |
20 | * could be ejected after sd_open. | |
21 | * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x | |
22 | * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox | |
23 | * <willy@debian.org>, Kurt Garloff <garloff@suse.de>: | |
24 | * Support 32k/1M disks. | |
25 | * | |
26 | * Logging policy (needs CONFIG_SCSI_LOGGING defined): | |
27 | * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2 | |
28 | * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1 | |
29 | * - entering sd_ioctl: SCSI_LOG_IOCTL level 1 | |
30 | * - entering other commands: SCSI_LOG_HLQUEUE level 3 | |
31 | * Note: when the logging level is set by the user, it must be greater | |
32 | * than the level indicated above to trigger output. | |
33 | */ | |
34 | ||
1da177e4 LT |
35 | #include <linux/module.h> |
36 | #include <linux/fs.h> | |
37 | #include <linux/kernel.h> | |
1da177e4 LT |
38 | #include <linux/mm.h> |
39 | #include <linux/bio.h> | |
40 | #include <linux/genhd.h> | |
41 | #include <linux/hdreg.h> | |
42 | #include <linux/errno.h> | |
43 | #include <linux/idr.h> | |
44 | #include <linux/interrupt.h> | |
45 | #include <linux/init.h> | |
46 | #include <linux/blkdev.h> | |
47 | #include <linux/blkpg.h> | |
1da177e4 | 48 | #include <linux/delay.h> |
0b950672 | 49 | #include <linux/mutex.h> |
7404ad3b | 50 | #include <linux/string_helpers.h> |
4ace92fc | 51 | #include <linux/async.h> |
5a0e3ad6 | 52 | #include <linux/slab.h> |
54f57588 | 53 | #include <linux/pm_runtime.h> |
924d55b0 | 54 | #include <linux/pr.h> |
8475c811 | 55 | #include <linux/t10-pi.h> |
7c0f6ba6 | 56 | #include <linux/uaccess.h> |
8f76d151 | 57 | #include <asm/unaligned.h> |
1da177e4 LT |
58 | |
59 | #include <scsi/scsi.h> | |
60 | #include <scsi/scsi_cmnd.h> | |
61 | #include <scsi/scsi_dbg.h> | |
62 | #include <scsi/scsi_device.h> | |
63 | #include <scsi/scsi_driver.h> | |
64 | #include <scsi/scsi_eh.h> | |
65 | #include <scsi/scsi_host.h> | |
66 | #include <scsi/scsi_ioctl.h> | |
1da177e4 LT |
67 | #include <scsi/scsicam.h> |
68 | ||
aa91696e | 69 | #include "sd.h" |
a7a20d10 | 70 | #include "scsi_priv.h" |
1da177e4 LT |
71 | #include "scsi_logging.h" |
72 | ||
f018fa55 RH |
73 | MODULE_AUTHOR("Eric Youngdale"); |
74 | MODULE_DESCRIPTION("SCSI disk (sd) driver"); | |
75 | MODULE_LICENSE("GPL"); | |
76 | ||
77 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR); | |
78 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR); | |
79 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR); | |
80 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR); | |
81 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR); | |
82 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR); | |
83 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR); | |
84 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR); | |
85 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR); | |
86 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR); | |
87 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR); | |
88 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR); | |
89 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR); | |
90 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR); | |
91 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR); | |
92 | MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR); | |
d7b8bcb0 MT |
93 | MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK); |
94 | MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); | |
95 | MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); | |
89d94756 | 96 | MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC); |
f018fa55 | 97 | |
870d6656 | 98 | #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) |
f615b48c | 99 | #define SD_MINORS 16 |
870d6656 | 100 | #else |
3e1a7ff8 | 101 | #define SD_MINORS 0 |
870d6656 TH |
102 | #endif |
103 | ||
c98a0eb0 | 104 | static void sd_config_discard(struct scsi_disk *, unsigned int); |
5db44863 | 105 | static void sd_config_write_same(struct scsi_disk *); |
7b3d9545 | 106 | static int sd_revalidate_disk(struct gendisk *); |
72ec24bd | 107 | static void sd_unlock_native_capacity(struct gendisk *disk); |
7b3d9545 LT |
108 | static int sd_probe(struct device *); |
109 | static int sd_remove(struct device *); | |
110 | static void sd_shutdown(struct device *); | |
95897910 ON |
111 | static int sd_suspend_system(struct device *); |
112 | static int sd_suspend_runtime(struct device *); | |
7b3d9545 LT |
113 | static int sd_resume(struct device *); |
114 | static void sd_rescan(struct device *); | |
a1b73fc1 CH |
115 | static int sd_init_command(struct scsi_cmnd *SCpnt); |
116 | static void sd_uninit_command(struct scsi_cmnd *SCpnt); | |
7b3d9545 | 117 | static int sd_done(struct scsi_cmnd *); |
2451079b | 118 | static int sd_eh_action(struct scsi_cmnd *, int); |
7b3d9545 | 119 | static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); |
ee959b00 | 120 | static void scsi_disk_release(struct device *cdev); |
7b3d9545 | 121 | static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); |
ef61329d | 122 | static void sd_print_result(const struct scsi_disk *, const char *, int); |
7b3d9545 | 123 | |
4034cc68 | 124 | static DEFINE_SPINLOCK(sd_index_lock); |
f27bac27 | 125 | static DEFINE_IDA(sd_index_ida); |
1da177e4 LT |
126 | |
127 | /* This semaphore is used to mediate the 0->1 reference get in the | |
128 | * face of object destruction (i.e. we can't allow a get on an | |
129 | * object after last put) */ | |
0b950672 | 130 | static DEFINE_MUTEX(sd_ref_mutex); |
1da177e4 | 131 | |
439d77f7 HS |
132 | static struct kmem_cache *sd_cdb_cache; |
133 | static mempool_t *sd_cdb_pool; | |
4e7392ec | 134 | |
6bdaa1f1 JB |
135 | static const char *sd_cache_types[] = { |
136 | "write through", "none", "write back", | |
137 | "write back, no read (daft)" | |
138 | }; | |
139 | ||
cb2fb68d VC |
140 | static void sd_set_flush_flag(struct scsi_disk *sdkp) |
141 | { | |
eb310e23 | 142 | bool wc = false, fua = false; |
cb2fb68d VC |
143 | |
144 | if (sdkp->WCE) { | |
eb310e23 | 145 | wc = true; |
cb2fb68d | 146 | if (sdkp->DPOFUA) |
eb310e23 | 147 | fua = true; |
cb2fb68d VC |
148 | } |
149 | ||
eb310e23 | 150 | blk_queue_write_cache(sdkp->disk->queue, wc, fua); |
cb2fb68d VC |
151 | } |
152 | ||
ee959b00 | 153 | static ssize_t |
e1ea2351 GKH |
154 | cache_type_store(struct device *dev, struct device_attribute *attr, |
155 | const char *buf, size_t count) | |
6bdaa1f1 JB |
156 | { |
157 | int i, ct = -1, rcd, wce, sp; | |
ee959b00 | 158 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
6bdaa1f1 JB |
159 | struct scsi_device *sdp = sdkp->device; |
160 | char buffer[64]; | |
161 | char *buffer_data; | |
162 | struct scsi_mode_data data; | |
163 | struct scsi_sense_hdr sshdr; | |
2ee3e26c | 164 | static const char temp[] = "temporary "; |
6bdaa1f1 JB |
165 | int len; |
166 | ||
89d94756 | 167 | if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
6bdaa1f1 JB |
168 | /* no cache control on RBC devices; theoretically they |
169 | * can do it, but there's probably so many exceptions | |
170 | * it's not worth the risk */ | |
171 | return -EINVAL; | |
172 | ||
39c60a09 JB |
173 | if (strncmp(buf, temp, sizeof(temp) - 1) == 0) { |
174 | buf += sizeof(temp) - 1; | |
175 | sdkp->cache_override = 1; | |
176 | } else { | |
177 | sdkp->cache_override = 0; | |
178 | } | |
179 | ||
6391a113 | 180 | for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) { |
439d77f7 | 181 | len = strlen(sd_cache_types[i]); |
6bdaa1f1 JB |
182 | if (strncmp(sd_cache_types[i], buf, len) == 0 && |
183 | buf[len] == '\n') { | |
184 | ct = i; | |
185 | break; | |
186 | } | |
187 | } | |
188 | if (ct < 0) | |
189 | return -EINVAL; | |
190 | rcd = ct & 0x01 ? 1 : 0; | |
2eefd57b | 191 | wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0; |
39c60a09 JB |
192 | |
193 | if (sdkp->cache_override) { | |
194 | sdkp->WCE = wce; | |
195 | sdkp->RCD = rcd; | |
cb2fb68d | 196 | sd_set_flush_flag(sdkp); |
39c60a09 JB |
197 | return count; |
198 | } | |
199 | ||
6bdaa1f1 JB |
200 | if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT, |
201 | SD_MAX_RETRIES, &data, NULL)) | |
202 | return -EINVAL; | |
a9312fb8 | 203 | len = min_t(size_t, sizeof(buffer), data.length - data.header_length - |
6bdaa1f1 JB |
204 | data.block_descriptor_length); |
205 | buffer_data = buffer + data.header_length + | |
206 | data.block_descriptor_length; | |
207 | buffer_data[2] &= ~0x05; | |
208 | buffer_data[2] |= wce << 2 | rcd; | |
209 | sp = buffer_data[0] & 0x80 ? 1 : 0; | |
2c5d16d6 | 210 | buffer_data[0] &= ~0x80; |
6bdaa1f1 JB |
211 | |
212 | if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT, | |
213 | SD_MAX_RETRIES, &data, &sshdr)) { | |
214 | if (scsi_sense_valid(&sshdr)) | |
e73aec82 | 215 | sd_print_sense_hdr(sdkp, &sshdr); |
6bdaa1f1 JB |
216 | return -EINVAL; |
217 | } | |
f98a8cae | 218 | revalidate_disk(sdkp->disk); |
6bdaa1f1 JB |
219 | return count; |
220 | } | |
221 | ||
ee959b00 | 222 | static ssize_t |
e1ea2351 GKH |
223 | manage_start_stop_show(struct device *dev, struct device_attribute *attr, |
224 | char *buf) | |
225 | { | |
226 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
227 | struct scsi_device *sdp = sdkp->device; | |
228 | ||
229 | return snprintf(buf, 20, "%u\n", sdp->manage_start_stop); | |
230 | } | |
231 | ||
232 | static ssize_t | |
233 | manage_start_stop_store(struct device *dev, struct device_attribute *attr, | |
234 | const char *buf, size_t count) | |
c3c94c5a | 235 | { |
ee959b00 | 236 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
c3c94c5a TH |
237 | struct scsi_device *sdp = sdkp->device; |
238 | ||
239 | if (!capable(CAP_SYS_ADMIN)) | |
240 | return -EACCES; | |
241 | ||
242 | sdp->manage_start_stop = simple_strtoul(buf, NULL, 10); | |
243 | ||
244 | return count; | |
245 | } | |
e1ea2351 | 246 | static DEVICE_ATTR_RW(manage_start_stop); |
c3c94c5a | 247 | |
ee959b00 | 248 | static ssize_t |
e1ea2351 GKH |
249 | allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf) |
250 | { | |
251 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
252 | ||
253 | return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart); | |
254 | } | |
255 | ||
256 | static ssize_t | |
257 | allow_restart_store(struct device *dev, struct device_attribute *attr, | |
258 | const char *buf, size_t count) | |
a144c5ae | 259 | { |
ee959b00 | 260 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
a144c5ae BK |
261 | struct scsi_device *sdp = sdkp->device; |
262 | ||
263 | if (!capable(CAP_SYS_ADMIN)) | |
264 | return -EACCES; | |
265 | ||
89d94756 | 266 | if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
a144c5ae BK |
267 | return -EINVAL; |
268 | ||
269 | sdp->allow_restart = simple_strtoul(buf, NULL, 10); | |
270 | ||
271 | return count; | |
272 | } | |
e1ea2351 | 273 | static DEVICE_ATTR_RW(allow_restart); |
a144c5ae | 274 | |
ee959b00 | 275 | static ssize_t |
e1ea2351 | 276 | cache_type_show(struct device *dev, struct device_attribute *attr, char *buf) |
6bdaa1f1 | 277 | { |
ee959b00 | 278 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
6bdaa1f1 JB |
279 | int ct = sdkp->RCD + 2*sdkp->WCE; |
280 | ||
281 | return snprintf(buf, 40, "%s\n", sd_cache_types[ct]); | |
282 | } | |
e1ea2351 | 283 | static DEVICE_ATTR_RW(cache_type); |
6bdaa1f1 | 284 | |
ee959b00 | 285 | static ssize_t |
e1ea2351 | 286 | FUA_show(struct device *dev, struct device_attribute *attr, char *buf) |
6bdaa1f1 | 287 | { |
ee959b00 | 288 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
6bdaa1f1 JB |
289 | |
290 | return snprintf(buf, 20, "%u\n", sdkp->DPOFUA); | |
291 | } | |
e1ea2351 | 292 | static DEVICE_ATTR_RO(FUA); |
6bdaa1f1 | 293 | |
ee959b00 | 294 | static ssize_t |
e1ea2351 GKH |
295 | protection_type_show(struct device *dev, struct device_attribute *attr, |
296 | char *buf) | |
e0597d70 MP |
297 | { |
298 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
299 | ||
300 | return snprintf(buf, 20, "%u\n", sdkp->protection_type); | |
301 | } | |
302 | ||
8172499a | 303 | static ssize_t |
e1ea2351 GKH |
304 | protection_type_store(struct device *dev, struct device_attribute *attr, |
305 | const char *buf, size_t count) | |
8172499a MP |
306 | { |
307 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
308 | unsigned int val; | |
309 | int err; | |
310 | ||
311 | if (!capable(CAP_SYS_ADMIN)) | |
312 | return -EACCES; | |
313 | ||
314 | err = kstrtouint(buf, 10, &val); | |
315 | ||
316 | if (err) | |
317 | return err; | |
318 | ||
8475c811 | 319 | if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION) |
8172499a MP |
320 | sdkp->protection_type = val; |
321 | ||
322 | return count; | |
323 | } | |
e1ea2351 | 324 | static DEVICE_ATTR_RW(protection_type); |
8172499a | 325 | |
518fa8e3 | 326 | static ssize_t |
e1ea2351 GKH |
327 | protection_mode_show(struct device *dev, struct device_attribute *attr, |
328 | char *buf) | |
518fa8e3 MP |
329 | { |
330 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
331 | struct scsi_device *sdp = sdkp->device; | |
332 | unsigned int dif, dix; | |
333 | ||
334 | dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); | |
335 | dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type); | |
336 | ||
8475c811 | 337 | if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) { |
518fa8e3 MP |
338 | dif = 0; |
339 | dix = 1; | |
340 | } | |
341 | ||
342 | if (!dif && !dix) | |
343 | return snprintf(buf, 20, "none\n"); | |
344 | ||
345 | return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif); | |
346 | } | |
e1ea2351 | 347 | static DEVICE_ATTR_RO(protection_mode); |
518fa8e3 | 348 | |
e0597d70 | 349 | static ssize_t |
e1ea2351 | 350 | app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf) |
e0597d70 MP |
351 | { |
352 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
353 | ||
354 | return snprintf(buf, 20, "%u\n", sdkp->ATO); | |
355 | } | |
e1ea2351 | 356 | static DEVICE_ATTR_RO(app_tag_own); |
e0597d70 | 357 | |
e339c1a7 | 358 | static ssize_t |
e1ea2351 GKH |
359 | thin_provisioning_show(struct device *dev, struct device_attribute *attr, |
360 | char *buf) | |
e339c1a7 MP |
361 | { |
362 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
363 | ||
c98a0eb0 MP |
364 | return snprintf(buf, 20, "%u\n", sdkp->lbpme); |
365 | } | |
e1ea2351 | 366 | static DEVICE_ATTR_RO(thin_provisioning); |
c98a0eb0 MP |
367 | |
368 | static const char *lbp_mode[] = { | |
369 | [SD_LBP_FULL] = "full", | |
370 | [SD_LBP_UNMAP] = "unmap", | |
371 | [SD_LBP_WS16] = "writesame_16", | |
372 | [SD_LBP_WS10] = "writesame_10", | |
373 | [SD_LBP_ZERO] = "writesame_zero", | |
374 | [SD_LBP_DISABLE] = "disabled", | |
375 | }; | |
376 | ||
377 | static ssize_t | |
e1ea2351 GKH |
378 | provisioning_mode_show(struct device *dev, struct device_attribute *attr, |
379 | char *buf) | |
c98a0eb0 MP |
380 | { |
381 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
382 | ||
383 | return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]); | |
384 | } | |
385 | ||
386 | static ssize_t | |
e1ea2351 GKH |
387 | provisioning_mode_store(struct device *dev, struct device_attribute *attr, |
388 | const char *buf, size_t count) | |
c98a0eb0 MP |
389 | { |
390 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
391 | struct scsi_device *sdp = sdkp->device; | |
392 | ||
393 | if (!capable(CAP_SYS_ADMIN)) | |
394 | return -EACCES; | |
395 | ||
89d94756 HR |
396 | if (sd_is_zoned(sdkp)) { |
397 | sd_config_discard(sdkp, SD_LBP_DISABLE); | |
398 | return count; | |
399 | } | |
400 | ||
c98a0eb0 MP |
401 | if (sdp->type != TYPE_DISK) |
402 | return -EINVAL; | |
403 | ||
404 | if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20)) | |
405 | sd_config_discard(sdkp, SD_LBP_UNMAP); | |
406 | else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20)) | |
407 | sd_config_discard(sdkp, SD_LBP_WS16); | |
408 | else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20)) | |
409 | sd_config_discard(sdkp, SD_LBP_WS10); | |
410 | else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20)) | |
411 | sd_config_discard(sdkp, SD_LBP_ZERO); | |
412 | else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20)) | |
413 | sd_config_discard(sdkp, SD_LBP_DISABLE); | |
414 | else | |
415 | return -EINVAL; | |
416 | ||
417 | return count; | |
e339c1a7 | 418 | } |
e1ea2351 | 419 | static DEVICE_ATTR_RW(provisioning_mode); |
e339c1a7 | 420 | |
18a4d0a2 | 421 | static ssize_t |
e1ea2351 GKH |
422 | max_medium_access_timeouts_show(struct device *dev, |
423 | struct device_attribute *attr, char *buf) | |
18a4d0a2 MP |
424 | { |
425 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
426 | ||
427 | return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts); | |
428 | } | |
429 | ||
430 | static ssize_t | |
e1ea2351 GKH |
431 | max_medium_access_timeouts_store(struct device *dev, |
432 | struct device_attribute *attr, const char *buf, | |
433 | size_t count) | |
18a4d0a2 MP |
434 | { |
435 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
436 | int err; | |
437 | ||
438 | if (!capable(CAP_SYS_ADMIN)) | |
439 | return -EACCES; | |
440 | ||
441 | err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts); | |
442 | ||
443 | return err ? err : count; | |
444 | } | |
e1ea2351 | 445 | static DEVICE_ATTR_RW(max_medium_access_timeouts); |
18a4d0a2 | 446 | |
5db44863 | 447 | static ssize_t |
e1ea2351 GKH |
448 | max_write_same_blocks_show(struct device *dev, struct device_attribute *attr, |
449 | char *buf) | |
5db44863 MP |
450 | { |
451 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
452 | ||
453 | return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks); | |
454 | } | |
455 | ||
456 | static ssize_t | |
e1ea2351 GKH |
457 | max_write_same_blocks_store(struct device *dev, struct device_attribute *attr, |
458 | const char *buf, size_t count) | |
5db44863 MP |
459 | { |
460 | struct scsi_disk *sdkp = to_scsi_disk(dev); | |
461 | struct scsi_device *sdp = sdkp->device; | |
462 | unsigned long max; | |
463 | int err; | |
464 | ||
465 | if (!capable(CAP_SYS_ADMIN)) | |
466 | return -EACCES; | |
467 | ||
89d94756 | 468 | if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
5db44863 MP |
469 | return -EINVAL; |
470 | ||
471 | err = kstrtoul(buf, 10, &max); | |
472 | ||
473 | if (err) | |
474 | return err; | |
475 | ||
476 | if (max == 0) | |
477 | sdp->no_write_same = 1; | |
66c28f97 MP |
478 | else if (max <= SD_MAX_WS16_BLOCKS) { |
479 | sdp->no_write_same = 0; | |
5db44863 | 480 | sdkp->max_ws_blocks = max; |
66c28f97 | 481 | } |
5db44863 MP |
482 | |
483 | sd_config_write_same(sdkp); | |
484 | ||
485 | return count; | |
486 | } | |
e1ea2351 GKH |
487 | static DEVICE_ATTR_RW(max_write_same_blocks); |
488 | ||
489 | static struct attribute *sd_disk_attrs[] = { | |
490 | &dev_attr_cache_type.attr, | |
491 | &dev_attr_FUA.attr, | |
492 | &dev_attr_allow_restart.attr, | |
493 | &dev_attr_manage_start_stop.attr, | |
494 | &dev_attr_protection_type.attr, | |
495 | &dev_attr_protection_mode.attr, | |
496 | &dev_attr_app_tag_own.attr, | |
497 | &dev_attr_thin_provisioning.attr, | |
498 | &dev_attr_provisioning_mode.attr, | |
499 | &dev_attr_max_write_same_blocks.attr, | |
500 | &dev_attr_max_medium_access_timeouts.attr, | |
501 | NULL, | |
6bdaa1f1 | 502 | }; |
e1ea2351 | 503 | ATTRIBUTE_GROUPS(sd_disk); |
6bdaa1f1 JB |
504 | |
505 | static struct class sd_disk_class = { | |
506 | .name = "scsi_disk", | |
507 | .owner = THIS_MODULE, | |
ee959b00 | 508 | .dev_release = scsi_disk_release, |
e1ea2351 | 509 | .dev_groups = sd_disk_groups, |
6bdaa1f1 | 510 | }; |
1da177e4 | 511 | |
691e3d31 | 512 | static const struct dev_pm_ops sd_pm_ops = { |
95897910 | 513 | .suspend = sd_suspend_system, |
691e3d31 | 514 | .resume = sd_resume, |
95897910 | 515 | .poweroff = sd_suspend_system, |
691e3d31 | 516 | .restore = sd_resume, |
95897910 | 517 | .runtime_suspend = sd_suspend_runtime, |
691e3d31 AL |
518 | .runtime_resume = sd_resume, |
519 | }; | |
520 | ||
1da177e4 | 521 | static struct scsi_driver sd_template = { |
1da177e4 LT |
522 | .gendrv = { |
523 | .name = "sd", | |
3af6b352 | 524 | .owner = THIS_MODULE, |
1da177e4 LT |
525 | .probe = sd_probe, |
526 | .remove = sd_remove, | |
527 | .shutdown = sd_shutdown, | |
691e3d31 | 528 | .pm = &sd_pm_ops, |
1da177e4 LT |
529 | }, |
530 | .rescan = sd_rescan, | |
a1b73fc1 CH |
531 | .init_command = sd_init_command, |
532 | .uninit_command = sd_uninit_command, | |
7b3d9545 | 533 | .done = sd_done, |
18a4d0a2 | 534 | .eh_action = sd_eh_action, |
1da177e4 LT |
535 | }; |
536 | ||
0761df9c HR |
537 | /* |
538 | * Dummy kobj_map->probe function. | |
539 | * The default ->probe function will call modprobe, which is | |
540 | * pointless as this module is already loaded. | |
541 | */ | |
542 | static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data) | |
543 | { | |
544 | return NULL; | |
545 | } | |
546 | ||
1da177e4 LT |
547 | /* |
548 | * Device no to disk mapping: | |
549 | * | |
550 | * major disc2 disc p1 | |
551 | * |............|.............|....|....| <- dev_t | |
552 | * 31 20 19 8 7 4 3 0 | |
553 | * | |
554 | * Inside a major, we have 16k disks, however mapped non- | |
555 | * contiguously. The first 16 disks are for major0, the next | |
556 | * ones with major1, ... Disk 256 is for major0 again, disk 272 | |
557 | * for major1, ... | |
558 | * As we stay compatible with our numbering scheme, we can reuse | |
559 | * the well-know SCSI majors 8, 65--71, 136--143. | |
560 | */ | |
561 | static int sd_major(int major_idx) | |
562 | { | |
563 | switch (major_idx) { | |
564 | case 0: | |
565 | return SCSI_DISK0_MAJOR; | |
566 | case 1 ... 7: | |
567 | return SCSI_DISK1_MAJOR + major_idx - 1; | |
568 | case 8 ... 15: | |
569 | return SCSI_DISK8_MAJOR + major_idx - 8; | |
570 | default: | |
571 | BUG(); | |
572 | return 0; /* shut up gcc */ | |
573 | } | |
574 | } | |
575 | ||
3d9a1f53 | 576 | static struct scsi_disk *scsi_disk_get(struct gendisk *disk) |
1da177e4 LT |
577 | { |
578 | struct scsi_disk *sdkp = NULL; | |
579 | ||
3d9a1f53 CH |
580 | mutex_lock(&sd_ref_mutex); |
581 | ||
39b7f1e2 AS |
582 | if (disk->private_data) { |
583 | sdkp = scsi_disk(disk); | |
584 | if (scsi_device_get(sdkp->device) == 0) | |
ee959b00 | 585 | get_device(&sdkp->dev); |
39b7f1e2 AS |
586 | else |
587 | sdkp = NULL; | |
588 | } | |
0b950672 | 589 | mutex_unlock(&sd_ref_mutex); |
1da177e4 LT |
590 | return sdkp; |
591 | } | |
592 | ||
593 | static void scsi_disk_put(struct scsi_disk *sdkp) | |
594 | { | |
595 | struct scsi_device *sdev = sdkp->device; | |
596 | ||
0b950672 | 597 | mutex_lock(&sd_ref_mutex); |
ee959b00 | 598 | put_device(&sdkp->dev); |
1da177e4 | 599 | scsi_device_put(sdev); |
0b950672 | 600 | mutex_unlock(&sd_ref_mutex); |
1da177e4 LT |
601 | } |
602 | ||
c611529e MP |
603 | static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd, |
604 | unsigned int dix, unsigned int dif) | |
35e1a5d9 | 605 | { |
c611529e MP |
606 | struct bio *bio = scmd->request->bio; |
607 | unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif); | |
608 | unsigned int protect = 0; | |
609 | ||
610 | if (dix) { /* DIX Type 0, 1, 2, 3 */ | |
611 | if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM)) | |
612 | scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM; | |
613 | ||
614 | if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) | |
615 | scmd->prot_flags |= SCSI_PROT_GUARD_CHECK; | |
616 | } | |
617 | ||
8475c811 | 618 | if (dif != T10_PI_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */ |
c611529e MP |
619 | scmd->prot_flags |= SCSI_PROT_REF_INCREMENT; |
620 | ||
621 | if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) | |
622 | scmd->prot_flags |= SCSI_PROT_REF_CHECK; | |
623 | } | |
624 | ||
625 | if (dif) { /* DIX/DIF Type 1, 2, 3 */ | |
626 | scmd->prot_flags |= SCSI_PROT_TRANSFER_PI; | |
627 | ||
628 | if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK)) | |
629 | protect = 3 << 5; /* Disable target PI checking */ | |
630 | else | |
631 | protect = 1 << 5; /* Enable target PI checking */ | |
35e1a5d9 MP |
632 | } |
633 | ||
634 | scsi_set_prot_op(scmd, prot_op); | |
635 | scsi_set_prot_type(scmd, dif); | |
c611529e MP |
636 | scmd->prot_flags &= sd_prot_flag_mask(prot_op); |
637 | ||
638 | return protect; | |
35e1a5d9 MP |
639 | } |
640 | ||
c98a0eb0 MP |
641 | static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) |
642 | { | |
643 | struct request_queue *q = sdkp->disk->queue; | |
644 | unsigned int logical_block_size = sdkp->device->sector_size; | |
645 | unsigned int max_blocks = 0; | |
646 | ||
7985090a | 647 | q->limits.discard_zeroes_data = 0; |
39773722 MP |
648 | |
649 | /* | |
650 | * When LBPRZ is reported, discard alignment and granularity | |
651 | * must be fixed to the logical block size. Otherwise the block | |
652 | * layer will drop misaligned portions of the request which can | |
653 | * lead to data corruption. If LBPRZ is not set, we honor the | |
654 | * device preference. | |
655 | */ | |
656 | if (sdkp->lbprz) { | |
657 | q->limits.discard_alignment = 0; | |
6540a65d | 658 | q->limits.discard_granularity = logical_block_size; |
39773722 MP |
659 | } else { |
660 | q->limits.discard_alignment = sdkp->unmap_alignment * | |
661 | logical_block_size; | |
662 | q->limits.discard_granularity = | |
663 | max(sdkp->physical_block_size, | |
664 | sdkp->unmap_granularity * logical_block_size); | |
665 | } | |
c98a0eb0 | 666 | |
89730393 MP |
667 | sdkp->provisioning_mode = mode; |
668 | ||
c98a0eb0 MP |
669 | switch (mode) { |
670 | ||
671 | case SD_LBP_DISABLE: | |
2bb4cd5c | 672 | blk_queue_max_discard_sectors(q, 0); |
c98a0eb0 MP |
673 | queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q); |
674 | return; | |
675 | ||
676 | case SD_LBP_UNMAP: | |
5db44863 MP |
677 | max_blocks = min_not_zero(sdkp->max_unmap_blocks, |
678 | (u32)SD_MAX_WS16_BLOCKS); | |
c98a0eb0 MP |
679 | break; |
680 | ||
681 | case SD_LBP_WS16: | |
5db44863 MP |
682 | max_blocks = min_not_zero(sdkp->max_ws_blocks, |
683 | (u32)SD_MAX_WS16_BLOCKS); | |
7985090a | 684 | q->limits.discard_zeroes_data = sdkp->lbprz; |
c98a0eb0 MP |
685 | break; |
686 | ||
687 | case SD_LBP_WS10: | |
5db44863 MP |
688 | max_blocks = min_not_zero(sdkp->max_ws_blocks, |
689 | (u32)SD_MAX_WS10_BLOCKS); | |
7985090a | 690 | q->limits.discard_zeroes_data = sdkp->lbprz; |
c98a0eb0 MP |
691 | break; |
692 | ||
693 | case SD_LBP_ZERO: | |
5db44863 MP |
694 | max_blocks = min_not_zero(sdkp->max_ws_blocks, |
695 | (u32)SD_MAX_WS10_BLOCKS); | |
c98a0eb0 MP |
696 | q->limits.discard_zeroes_data = 1; |
697 | break; | |
698 | } | |
699 | ||
2bb4cd5c | 700 | blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9)); |
c98a0eb0 | 701 | queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); |
c98a0eb0 MP |
702 | } |
703 | ||
e339c1a7 | 704 | /** |
26e85fcd | 705 | * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device |
66ac0280 | 706 | * @sdp: scsi device to operate one |
e339c1a7 MP |
707 | * @rq: Request to prepare |
708 | * | |
709 | * Will issue either UNMAP or WRITE SAME(16) depending on preference | |
710 | * indicated by target device. | |
711 | **/ | |
6a7b4398 | 712 | static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd) |
e339c1a7 | 713 | { |
6a7b4398 CH |
714 | struct request *rq = cmd->request; |
715 | struct scsi_device *sdp = cmd->device; | |
e339c1a7 | 716 | struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
26e85fcd MP |
717 | sector_t sector = blk_rq_pos(rq); |
718 | unsigned int nr_sectors = blk_rq_sectors(rq); | |
66ac0280 | 719 | unsigned int len; |
f1126e95 | 720 | int ret; |
c98a0eb0 | 721 | char *buf; |
66ac0280 | 722 | struct page *page; |
e339c1a7 | 723 | |
26e85fcd MP |
724 | sector >>= ilog2(sdp->sector_size) - 9; |
725 | nr_sectors >>= ilog2(sdp->sector_size) - 9; | |
e339c1a7 | 726 | |
66ac0280 CH |
727 | page = alloc_page(GFP_ATOMIC | __GFP_ZERO); |
728 | if (!page) | |
729 | return BLKPREP_DEFER; | |
730 | ||
c98a0eb0 MP |
731 | switch (sdkp->provisioning_mode) { |
732 | case SD_LBP_UNMAP: | |
733 | buf = page_address(page); | |
e339c1a7 | 734 | |
6a7b4398 CH |
735 | cmd->cmd_len = 10; |
736 | cmd->cmnd[0] = UNMAP; | |
737 | cmd->cmnd[8] = 24; | |
e339c1a7 MP |
738 | |
739 | put_unaligned_be16(6 + 16, &buf[0]); | |
740 | put_unaligned_be16(16, &buf[2]); | |
741 | put_unaligned_be64(sector, &buf[8]); | |
66ac0280 | 742 | put_unaligned_be32(nr_sectors, &buf[16]); |
e339c1a7 | 743 | |
66ac0280 | 744 | len = 24; |
c98a0eb0 MP |
745 | break; |
746 | ||
747 | case SD_LBP_WS16: | |
6a7b4398 CH |
748 | cmd->cmd_len = 16; |
749 | cmd->cmnd[0] = WRITE_SAME_16; | |
750 | cmd->cmnd[1] = 0x8; /* UNMAP */ | |
751 | put_unaligned_be64(sector, &cmd->cmnd[2]); | |
752 | put_unaligned_be32(nr_sectors, &cmd->cmnd[10]); | |
66ac0280 CH |
753 | |
754 | len = sdkp->device->sector_size; | |
c98a0eb0 MP |
755 | break; |
756 | ||
757 | case SD_LBP_WS10: | |
758 | case SD_LBP_ZERO: | |
6a7b4398 CH |
759 | cmd->cmd_len = 10; |
760 | cmd->cmnd[0] = WRITE_SAME; | |
c98a0eb0 | 761 | if (sdkp->provisioning_mode == SD_LBP_WS10) |
6a7b4398 CH |
762 | cmd->cmnd[1] = 0x8; /* UNMAP */ |
763 | put_unaligned_be32(sector, &cmd->cmnd[2]); | |
764 | put_unaligned_be16(nr_sectors, &cmd->cmnd[7]); | |
c98a0eb0 MP |
765 | |
766 | len = sdkp->device->sector_size; | |
767 | break; | |
768 | ||
769 | default: | |
0fb5b1fb | 770 | ret = BLKPREP_INVALID; |
c98a0eb0 | 771 | goto out; |
e339c1a7 MP |
772 | } |
773 | ||
6a7b4398 CH |
774 | rq->timeout = SD_TIMEOUT; |
775 | ||
776 | cmd->transfersize = len; | |
e4200f8e | 777 | cmd->allowed = SD_MAX_RETRIES; |
6a7b4398 | 778 | |
f9d03f96 CH |
779 | rq->special_vec.bv_page = page; |
780 | rq->special_vec.bv_offset = 0; | |
781 | rq->special_vec.bv_len = len; | |
782 | ||
783 | rq->rq_flags |= RQF_SPECIAL_PAYLOAD; | |
82ed4db4 | 784 | scsi_req(rq)->resid_len = len; |
c98a0eb0 | 785 | |
f9d03f96 | 786 | ret = scsi_init_io(cmd); |
c98a0eb0 | 787 | out: |
b4f42e28 | 788 | if (ret != BLKPREP_OK) |
610a6349 | 789 | __free_page(page); |
f1126e95 FT |
790 | return ret; |
791 | } | |
792 | ||
5db44863 MP |
793 | static void sd_config_write_same(struct scsi_disk *sdkp) |
794 | { | |
795 | struct request_queue *q = sdkp->disk->queue; | |
796 | unsigned int logical_block_size = sdkp->device->sector_size; | |
5db44863 MP |
797 | |
798 | if (sdkp->device->no_write_same) { | |
799 | sdkp->max_ws_blocks = 0; | |
800 | goto out; | |
801 | } | |
802 | ||
803 | /* Some devices can not handle block counts above 0xffff despite | |
804 | * supporting WRITE SAME(16). Consequently we default to 64k | |
805 | * blocks per I/O unless the device explicitly advertises a | |
806 | * bigger limit. | |
807 | */ | |
66c28f97 MP |
808 | if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS) |
809 | sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, | |
810 | (u32)SD_MAX_WS16_BLOCKS); | |
811 | else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes) | |
812 | sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, | |
813 | (u32)SD_MAX_WS10_BLOCKS); | |
814 | else { | |
815 | sdkp->device->no_write_same = 1; | |
816 | sdkp->max_ws_blocks = 0; | |
817 | } | |
5db44863 MP |
818 | |
819 | out: | |
66c28f97 MP |
820 | blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks * |
821 | (logical_block_size >> 9)); | |
5db44863 MP |
822 | } |
823 | ||
824 | /** | |
825 | * sd_setup_write_same_cmnd - write the same data to multiple blocks | |
59b1134c | 826 | * @cmd: command to prepare |
5db44863 MP |
827 | * |
828 | * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on | |
829 | * preference indicated by target device. | |
830 | **/ | |
59b1134c | 831 | static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) |
5db44863 | 832 | { |
59b1134c CH |
833 | struct request *rq = cmd->request; |
834 | struct scsi_device *sdp = cmd->device; | |
5db44863 MP |
835 | struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
836 | struct bio *bio = rq->bio; | |
837 | sector_t sector = blk_rq_pos(rq); | |
838 | unsigned int nr_sectors = blk_rq_sectors(rq); | |
5db44863 MP |
839 | int ret; |
840 | ||
841 | if (sdkp->device->no_write_same) | |
0fb5b1fb | 842 | return BLKPREP_INVALID; |
5db44863 | 843 | |
a4ad39b1 | 844 | BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size); |
5db44863 | 845 | |
89d94756 HR |
846 | if (sd_is_zoned(sdkp)) { |
847 | ret = sd_zbc_setup_write_cmnd(cmd); | |
848 | if (ret != BLKPREP_OK) | |
849 | return ret; | |
850 | } | |
851 | ||
5db44863 MP |
852 | sector >>= ilog2(sdp->sector_size) - 9; |
853 | nr_sectors >>= ilog2(sdp->sector_size) - 9; | |
854 | ||
5db44863 | 855 | rq->timeout = SD_WRITE_SAME_TIMEOUT; |
5db44863 MP |
856 | |
857 | if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) { | |
59b1134c CH |
858 | cmd->cmd_len = 16; |
859 | cmd->cmnd[0] = WRITE_SAME_16; | |
860 | put_unaligned_be64(sector, &cmd->cmnd[2]); | |
861 | put_unaligned_be32(nr_sectors, &cmd->cmnd[10]); | |
5db44863 | 862 | } else { |
59b1134c CH |
863 | cmd->cmd_len = 10; |
864 | cmd->cmnd[0] = WRITE_SAME; | |
865 | put_unaligned_be32(sector, &cmd->cmnd[2]); | |
866 | put_unaligned_be16(nr_sectors, &cmd->cmnd[7]); | |
5db44863 MP |
867 | } |
868 | ||
59b1134c | 869 | cmd->transfersize = sdp->sector_size; |
a25ee548 | 870 | cmd->allowed = SD_MAX_RETRIES; |
f80de881 | 871 | return scsi_init_io(cmd); |
5db44863 MP |
872 | } |
873 | ||
a118c6c1 | 874 | static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd) |
90467c29 | 875 | { |
a118c6c1 CH |
876 | struct request *rq = cmd->request; |
877 | ||
878 | /* flush requests don't perform I/O, zero the S/G table */ | |
879 | memset(&cmd->sdb, 0, sizeof(cmd->sdb)); | |
90467c29 | 880 | |
a118c6c1 CH |
881 | cmd->cmnd[0] = SYNCHRONIZE_CACHE; |
882 | cmd->cmd_len = 10; | |
883 | cmd->transfersize = 0; | |
884 | cmd->allowed = SD_MAX_RETRIES; | |
885 | ||
26b9fd8b | 886 | rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER; |
a118c6c1 | 887 | return BLKPREP_OK; |
90467c29 FT |
888 | } |
889 | ||
87949eee | 890 | static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt) |
1da177e4 | 891 | { |
a1b73fc1 CH |
892 | struct request *rq = SCpnt->request; |
893 | struct scsi_device *sdp = SCpnt->device; | |
776b23a0 | 894 | struct gendisk *disk = rq->rq_disk; |
89d94756 | 895 | struct scsi_disk *sdkp = scsi_disk(disk); |
83096ebf | 896 | sector_t block = blk_rq_pos(rq); |
18351070 | 897 | sector_t threshold; |
83096ebf | 898 | unsigned int this_count = blk_rq_sectors(rq); |
c611529e | 899 | unsigned int dif, dix; |
89d94756 | 900 | bool zoned_write = sd_is_zoned(sdkp) && rq_data_dir(rq) == WRITE; |
c611529e | 901 | int ret; |
4e7392ec | 902 | unsigned char protect; |
7f9a6bc4 | 903 | |
89d94756 HR |
904 | if (zoned_write) { |
905 | ret = sd_zbc_setup_write_cmnd(SCpnt); | |
906 | if (ret != BLKPREP_OK) | |
907 | return ret; | |
908 | } | |
909 | ||
3c356bde | 910 | ret = scsi_init_io(SCpnt); |
7f9a6bc4 JB |
911 | if (ret != BLKPREP_OK) |
912 | goto out; | |
913 | SCpnt = rq->special; | |
914 | ||
915 | /* from here on until we're complete, any goto out | |
916 | * is used for a killable error condition */ | |
917 | ret = BLKPREP_KILL; | |
1da177e4 | 918 | |
a1b73fc1 CH |
919 | SCSI_LOG_HLQUEUE(1, |
920 | scmd_printk(KERN_INFO, SCpnt, | |
921 | "%s: block=%llu, count=%d\n", | |
922 | __func__, (unsigned long long)block, this_count)); | |
1da177e4 LT |
923 | |
924 | if (!sdp || !scsi_device_online(sdp) || | |
83096ebf | 925 | block + blk_rq_sectors(rq) > get_capacity(disk)) { |
fa0d34be | 926 | SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, |
83096ebf TH |
927 | "Finishing %u sectors\n", |
928 | blk_rq_sectors(rq))); | |
fa0d34be MP |
929 | SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, |
930 | "Retry with 0x%p\n", SCpnt)); | |
7f9a6bc4 | 931 | goto out; |
1da177e4 LT |
932 | } |
933 | ||
934 | if (sdp->changed) { | |
935 | /* | |
936 | * quietly refuse to do anything to a changed disc until | |
937 | * the changed bit has been reset | |
938 | */ | |
3ff5588d | 939 | /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */ |
7f9a6bc4 | 940 | goto out; |
1da177e4 | 941 | } |
7f9a6bc4 | 942 | |
a0899d4d | 943 | /* |
18351070 LT |
944 | * Some SD card readers can't handle multi-sector accesses which touch |
945 | * the last one or two hardware sectors. Split accesses as needed. | |
a0899d4d | 946 | */ |
18351070 LT |
947 | threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * |
948 | (sdp->sector_size / 512); | |
949 | ||
950 | if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { | |
951 | if (block < threshold) { | |
952 | /* Access up to the threshold but not beyond */ | |
953 | this_count = threshold - block; | |
954 | } else { | |
955 | /* Access only a single hardware sector */ | |
956 | this_count = sdp->sector_size / 512; | |
957 | } | |
958 | } | |
a0899d4d | 959 | |
fa0d34be MP |
960 | SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", |
961 | (unsigned long long)block)); | |
1da177e4 LT |
962 | |
963 | /* | |
964 | * If we have a 1K hardware sectorsize, prevent access to single | |
965 | * 512 byte sectors. In theory we could handle this - in fact | |
966 | * the scsi cdrom driver must be able to handle this because | |
967 | * we typically use 1K blocksizes, and cdroms typically have | |
968 | * 2K hardware sectorsizes. Of course, things are simpler | |
969 | * with the cdrom, since it is read-only. For performance | |
970 | * reasons, the filesystems should be able to handle this | |
971 | * and not force the scsi disk driver to use bounce buffers | |
972 | * for this. | |
973 | */ | |
974 | if (sdp->sector_size == 1024) { | |
83096ebf | 975 | if ((block & 1) || (blk_rq_sectors(rq) & 1)) { |
e73aec82 MP |
976 | scmd_printk(KERN_ERR, SCpnt, |
977 | "Bad block number requested\n"); | |
7f9a6bc4 | 978 | goto out; |
1da177e4 LT |
979 | } else { |
980 | block = block >> 1; | |
981 | this_count = this_count >> 1; | |
982 | } | |
983 | } | |
984 | if (sdp->sector_size == 2048) { | |
83096ebf | 985 | if ((block & 3) || (blk_rq_sectors(rq) & 3)) { |
e73aec82 MP |
986 | scmd_printk(KERN_ERR, SCpnt, |
987 | "Bad block number requested\n"); | |
7f9a6bc4 | 988 | goto out; |
1da177e4 LT |
989 | } else { |
990 | block = block >> 2; | |
991 | this_count = this_count >> 2; | |
992 | } | |
993 | } | |
994 | if (sdp->sector_size == 4096) { | |
83096ebf | 995 | if ((block & 7) || (blk_rq_sectors(rq) & 7)) { |
e73aec82 MP |
996 | scmd_printk(KERN_ERR, SCpnt, |
997 | "Bad block number requested\n"); | |
7f9a6bc4 | 998 | goto out; |
1da177e4 LT |
999 | } else { |
1000 | block = block >> 3; | |
1001 | this_count = this_count >> 3; | |
1002 | } | |
1003 | } | |
1004 | if (rq_data_dir(rq) == WRITE) { | |
1da177e4 | 1005 | SCpnt->cmnd[0] = WRITE_6; |
af55ff67 | 1006 | |
8c579ab6 | 1007 | if (blk_integrity_rq(rq)) |
c611529e | 1008 | sd_dif_prepare(SCpnt); |
af55ff67 | 1009 | |
1da177e4 LT |
1010 | } else if (rq_data_dir(rq) == READ) { |
1011 | SCpnt->cmnd[0] = READ_6; | |
1da177e4 | 1012 | } else { |
ef295ecf | 1013 | scmd_printk(KERN_ERR, SCpnt, "Unknown command %d\n", req_op(rq)); |
7f9a6bc4 | 1014 | goto out; |
1da177e4 LT |
1015 | } |
1016 | ||
fa0d34be | 1017 | SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, |
83096ebf | 1018 | "%s %d/%u 512 byte blocks.\n", |
fa0d34be MP |
1019 | (rq_data_dir(rq) == WRITE) ? |
1020 | "writing" : "reading", this_count, | |
83096ebf | 1021 | blk_rq_sectors(rq))); |
1da177e4 | 1022 | |
c611529e MP |
1023 | dix = scsi_prot_sg_count(SCpnt); |
1024 | dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type); | |
1025 | ||
1026 | if (dif || dix) | |
1027 | protect = sd_setup_protect_cmnd(SCpnt, dix, dif); | |
af55ff67 | 1028 | else |
4e7392ec MP |
1029 | protect = 0; |
1030 | ||
8475c811 | 1031 | if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) { |
4e7392ec MP |
1032 | SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC); |
1033 | ||
1034 | if (unlikely(SCpnt->cmnd == NULL)) { | |
1035 | ret = BLKPREP_DEFER; | |
1036 | goto out; | |
1037 | } | |
af55ff67 | 1038 | |
4e7392ec MP |
1039 | SCpnt->cmd_len = SD_EXT_CDB_SIZE; |
1040 | memset(SCpnt->cmnd, 0, SCpnt->cmd_len); | |
1041 | SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD; | |
1042 | SCpnt->cmnd[7] = 0x18; | |
1043 | SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32; | |
33659ebb | 1044 | SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); |
4e7392ec MP |
1045 | |
1046 | /* LBA */ | |
1047 | SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0; | |
1048 | SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0; | |
1049 | SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0; | |
1050 | SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0; | |
1051 | SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff; | |
1052 | SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff; | |
1053 | SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff; | |
1054 | SCpnt->cmnd[19] = (unsigned char) block & 0xff; | |
1055 | ||
1056 | /* Expected Indirect LBA */ | |
1057 | SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff; | |
1058 | SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff; | |
1059 | SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff; | |
1060 | SCpnt->cmnd[23] = (unsigned char) block & 0xff; | |
1061 | ||
1062 | /* Transfer length */ | |
1063 | SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff; | |
1064 | SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff; | |
1065 | SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff; | |
1066 | SCpnt->cmnd[31] = (unsigned char) this_count & 0xff; | |
e430cbc8 | 1067 | } else if (sdp->use_16_for_rw || (this_count > 0xffff)) { |
1da177e4 | 1068 | SCpnt->cmnd[0] += READ_16 - READ_6; |
33659ebb | 1069 | SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); |
1da177e4 LT |
1070 | SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0; |
1071 | SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0; | |
1072 | SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0; | |
1073 | SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0; | |
1074 | SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff; | |
1075 | SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff; | |
1076 | SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff; | |
1077 | SCpnt->cmnd[9] = (unsigned char) block & 0xff; | |
1078 | SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff; | |
1079 | SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff; | |
1080 | SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff; | |
1081 | SCpnt->cmnd[13] = (unsigned char) this_count & 0xff; | |
1082 | SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0; | |
1083 | } else if ((this_count > 0xff) || (block > 0x1fffff) || | |
af55ff67 | 1084 | scsi_device_protection(SCpnt->device) || |
1da177e4 | 1085 | SCpnt->device->use_10_for_rw) { |
1da177e4 | 1086 | SCpnt->cmnd[0] += READ_10 - READ_6; |
33659ebb | 1087 | SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); |
1da177e4 LT |
1088 | SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff; |
1089 | SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff; | |
1090 | SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff; | |
1091 | SCpnt->cmnd[5] = (unsigned char) block & 0xff; | |
1092 | SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0; | |
1093 | SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff; | |
1094 | SCpnt->cmnd[8] = (unsigned char) this_count & 0xff; | |
1095 | } else { | |
33659ebb | 1096 | if (unlikely(rq->cmd_flags & REQ_FUA)) { |
007365ad TH |
1097 | /* |
1098 | * This happens only if this drive failed | |
1099 | * 10byte rw command with ILLEGAL_REQUEST | |
1100 | * during operation and thus turned off | |
1101 | * use_10_for_rw. | |
1102 | */ | |
e73aec82 MP |
1103 | scmd_printk(KERN_ERR, SCpnt, |
1104 | "FUA write on READ/WRITE(6) drive\n"); | |
7f9a6bc4 | 1105 | goto out; |
007365ad TH |
1106 | } |
1107 | ||
1da177e4 LT |
1108 | SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f); |
1109 | SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff); | |
1110 | SCpnt->cmnd[3] = (unsigned char) block & 0xff; | |
1111 | SCpnt->cmnd[4] = (unsigned char) this_count; | |
1112 | SCpnt->cmnd[5] = 0; | |
1113 | } | |
30b0c37b | 1114 | SCpnt->sdb.length = this_count * sdp->sector_size; |
1da177e4 LT |
1115 | |
1116 | /* | |
1117 | * We shouldn't disconnect in the middle of a sector, so with a dumb | |
1118 | * host adapter, it's safe to assume that we can at least transfer | |
1119 | * this many bytes between each connect / disconnect. | |
1120 | */ | |
1121 | SCpnt->transfersize = sdp->sector_size; | |
1122 | SCpnt->underflow = this_count << 9; | |
1123 | SCpnt->allowed = SD_MAX_RETRIES; | |
1da177e4 | 1124 | |
1da177e4 LT |
1125 | /* |
1126 | * This indicates that the command is ready from our end to be | |
1127 | * queued. | |
1128 | */ | |
7f9a6bc4 JB |
1129 | ret = BLKPREP_OK; |
1130 | out: | |
89d94756 HR |
1131 | if (zoned_write && ret != BLKPREP_OK) |
1132 | sd_zbc_cancel_write_cmnd(SCpnt); | |
1133 | ||
a1b73fc1 | 1134 | return ret; |
1da177e4 LT |
1135 | } |
1136 | ||
87949eee CH |
1137 | static int sd_init_command(struct scsi_cmnd *cmd) |
1138 | { | |
1139 | struct request *rq = cmd->request; | |
1140 | ||
c2df40df MC |
1141 | switch (req_op(rq)) { |
1142 | case REQ_OP_DISCARD: | |
87949eee | 1143 | return sd_setup_discard_cmnd(cmd); |
c2df40df | 1144 | case REQ_OP_WRITE_SAME: |
87949eee | 1145 | return sd_setup_write_same_cmnd(cmd); |
3a5e02ce | 1146 | case REQ_OP_FLUSH: |
87949eee | 1147 | return sd_setup_flush_cmnd(cmd); |
c2df40df MC |
1148 | case REQ_OP_READ: |
1149 | case REQ_OP_WRITE: | |
87949eee | 1150 | return sd_setup_read_write_cmnd(cmd); |
89d94756 HR |
1151 | case REQ_OP_ZONE_REPORT: |
1152 | return sd_zbc_setup_report_cmnd(cmd); | |
1153 | case REQ_OP_ZONE_RESET: | |
1154 | return sd_zbc_setup_reset_cmnd(cmd); | |
c2df40df MC |
1155 | default: |
1156 | BUG(); | |
1157 | } | |
87949eee CH |
1158 | } |
1159 | ||
1160 | static void sd_uninit_command(struct scsi_cmnd *SCpnt) | |
1161 | { | |
1162 | struct request *rq = SCpnt->request; | |
1163 | ||
f9d03f96 CH |
1164 | if (rq->rq_flags & RQF_SPECIAL_PAYLOAD) |
1165 | __free_page(rq->special_vec.bv_page); | |
87949eee | 1166 | |
82ed4db4 | 1167 | if (SCpnt->cmnd != scsi_req(rq)->cmd) { |
87949eee CH |
1168 | mempool_free(SCpnt->cmnd, sd_cdb_pool); |
1169 | SCpnt->cmnd = NULL; | |
1170 | SCpnt->cmd_len = 0; | |
1171 | } | |
1172 | } | |
1173 | ||
1da177e4 LT |
1174 | /** |
1175 | * sd_open - open a scsi disk device | |
1176 | * @inode: only i_rdev member may be used | |
1177 | * @filp: only f_mode and f_flags may be used | |
1178 | * | |
1179 | * Returns 0 if successful. Returns a negated errno value in case | |
1180 | * of error. | |
1181 | * | |
1182 | * Note: This can be called from a user context (e.g. fsck(1) ) | |
1183 | * or from within the kernel (e.g. as a result of a mount(1) ). | |
1184 | * In the latter case @inode and @filp carry an abridged amount | |
1185 | * of information as noted above. | |
409f3499 AB |
1186 | * |
1187 | * Locking: called with bdev->bd_mutex held. | |
1da177e4 | 1188 | **/ |
0338e291 | 1189 | static int sd_open(struct block_device *bdev, fmode_t mode) |
1da177e4 | 1190 | { |
0338e291 | 1191 | struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk); |
1da177e4 LT |
1192 | struct scsi_device *sdev; |
1193 | int retval; | |
1194 | ||
0338e291 | 1195 | if (!sdkp) |
1da177e4 LT |
1196 | return -ENXIO; |
1197 | ||
fa0d34be | 1198 | SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n")); |
1da177e4 LT |
1199 | |
1200 | sdev = sdkp->device; | |
1201 | ||
1202 | /* | |
1203 | * If the device is in error recovery, wait until it is done. | |
1204 | * If the device is offline, then disallow any access to it. | |
1205 | */ | |
1206 | retval = -ENXIO; | |
1207 | if (!scsi_block_when_processing_errors(sdev)) | |
1208 | goto error_out; | |
1209 | ||
1210 | if (sdev->removable || sdkp->write_prot) | |
0338e291 | 1211 | check_disk_change(bdev); |
1da177e4 LT |
1212 | |
1213 | /* | |
1214 | * If the drive is empty, just let the open fail. | |
1215 | */ | |
1216 | retval = -ENOMEDIUM; | |
0338e291 | 1217 | if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY)) |
1da177e4 LT |
1218 | goto error_out; |
1219 | ||
1220 | /* | |
1221 | * If the device has the write protect tab set, have the open fail | |
1222 | * if the user expects to be able to write to the thing. | |
1223 | */ | |
1224 | retval = -EROFS; | |
0338e291 | 1225 | if (sdkp->write_prot && (mode & FMODE_WRITE)) |
1da177e4 LT |
1226 | goto error_out; |
1227 | ||
1228 | /* | |
1229 | * It is possible that the disk changing stuff resulted in | |
1230 | * the device being taken offline. If this is the case, | |
1231 | * report this to the user, and don't pretend that the | |
1232 | * open actually succeeded. | |
1233 | */ | |
1234 | retval = -ENXIO; | |
1235 | if (!scsi_device_online(sdev)) | |
1236 | goto error_out; | |
1237 | ||
409f3499 | 1238 | if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) { |
1da177e4 LT |
1239 | if (scsi_block_when_processing_errors(sdev)) |
1240 | scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT); | |
1241 | } | |
1242 | ||
1243 | return 0; | |
1244 | ||
1245 | error_out: | |
1246 | scsi_disk_put(sdkp); | |
1247 | return retval; | |
1248 | } | |
1249 | ||
1250 | /** | |
1251 | * sd_release - invoked when the (last) close(2) is called on this | |
1252 | * scsi disk. | |
1253 | * @inode: only i_rdev member may be used | |
1254 | * @filp: only f_mode and f_flags may be used | |
1255 | * | |
1256 | * Returns 0. | |
1257 | * | |
1258 | * Note: may block (uninterruptible) if error recovery is underway | |
1259 | * on this disk. | |
409f3499 AB |
1260 | * |
1261 | * Locking: called with bdev->bd_mutex held. | |
1da177e4 | 1262 | **/ |
db2a144b | 1263 | static void sd_release(struct gendisk *disk, fmode_t mode) |
1da177e4 | 1264 | { |
1da177e4 LT |
1265 | struct scsi_disk *sdkp = scsi_disk(disk); |
1266 | struct scsi_device *sdev = sdkp->device; | |
1267 | ||
56937f7b | 1268 | SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n")); |
1da177e4 | 1269 | |
7e443312 | 1270 | if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) { |
1da177e4 LT |
1271 | if (scsi_block_when_processing_errors(sdev)) |
1272 | scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); | |
1273 | } | |
1274 | ||
1275 | /* | |
1276 | * XXX and what if there are packets in flight and this close() | |
1277 | * XXX is followed by a "rmmod sd_mod"? | |
1278 | */ | |
478a8a05 | 1279 | |
1da177e4 | 1280 | scsi_disk_put(sdkp); |
1da177e4 LT |
1281 | } |
1282 | ||
a885c8c4 | 1283 | static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
1da177e4 LT |
1284 | { |
1285 | struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); | |
1286 | struct scsi_device *sdp = sdkp->device; | |
1287 | struct Scsi_Host *host = sdp->host; | |
f08bb1e0 | 1288 | sector_t capacity = logical_to_sectors(sdp, sdkp->capacity); |
1da177e4 LT |
1289 | int diskinfo[4]; |
1290 | ||
1291 | /* default to most commonly used values */ | |
f08bb1e0 MP |
1292 | diskinfo[0] = 0x40; /* 1 << 6 */ |
1293 | diskinfo[1] = 0x20; /* 1 << 5 */ | |
1294 | diskinfo[2] = capacity >> 11; | |
1295 | ||
1da177e4 LT |
1296 | /* override with calculated, extended default, or driver values */ |
1297 | if (host->hostt->bios_param) | |
f08bb1e0 | 1298 | host->hostt->bios_param(sdp, bdev, capacity, diskinfo); |
1da177e4 | 1299 | else |
f08bb1e0 | 1300 | scsicam_bios_param(bdev, capacity, diskinfo); |
1da177e4 | 1301 | |
a885c8c4 CH |
1302 | geo->heads = diskinfo[0]; |
1303 | geo->sectors = diskinfo[1]; | |
1304 | geo->cylinders = diskinfo[2]; | |
1da177e4 LT |
1305 | return 0; |
1306 | } | |
1307 | ||
1308 | /** | |
1309 | * sd_ioctl - process an ioctl | |
1310 | * @inode: only i_rdev/i_bdev members may be used | |
1311 | * @filp: only f_mode and f_flags may be used | |
1312 | * @cmd: ioctl command number | |
1313 | * @arg: this is third argument given to ioctl(2) system call. | |
1314 | * Often contains a pointer. | |
1315 | * | |
25985edc | 1316 | * Returns 0 if successful (some ioctls return positive numbers on |
1da177e4 LT |
1317 | * success as well). Returns a negated errno value in case of error. |
1318 | * | |
1319 | * Note: most ioctls are forward onto the block subsystem or further | |
3a4fa0a2 | 1320 | * down in the scsi subsystem. |
1da177e4 | 1321 | **/ |
0338e291 | 1322 | static int sd_ioctl(struct block_device *bdev, fmode_t mode, |
1da177e4 LT |
1323 | unsigned int cmd, unsigned long arg) |
1324 | { | |
1da177e4 | 1325 | struct gendisk *disk = bdev->bd_disk; |
fe2d1851 NN |
1326 | struct scsi_disk *sdkp = scsi_disk(disk); |
1327 | struct scsi_device *sdp = sdkp->device; | |
1da177e4 LT |
1328 | void __user *p = (void __user *)arg; |
1329 | int error; | |
1330 | ||
fe2d1851 NN |
1331 | SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, " |
1332 | "cmd=0x%x\n", disk->disk_name, cmd)); | |
1da177e4 | 1333 | |
0bfc96cb PB |
1334 | error = scsi_verify_blk_ioctl(bdev, cmd); |
1335 | if (error < 0) | |
1336 | return error; | |
1337 | ||
1da177e4 LT |
1338 | /* |
1339 | * If we are in the middle of error recovery, don't let anyone | |
1340 | * else try and use this device. Also, if error recovery fails, it | |
1341 | * may try and take the device offline, in which case all further | |
1342 | * access to the device is prohibited. | |
1343 | */ | |
906d15fb CH |
1344 | error = scsi_ioctl_block_when_processing_errors(sdp, cmd, |
1345 | (mode & FMODE_NDELAY) != 0); | |
1346 | if (error) | |
8a6cfeb6 | 1347 | goto out; |
1da177e4 | 1348 | |
1da177e4 LT |
1349 | /* |
1350 | * Send SCSI addressing ioctls directly to mid level, send other | |
1351 | * ioctls to block level and then onto mid level if they can't be | |
1352 | * resolved. | |
1353 | */ | |
1354 | switch (cmd) { | |
1355 | case SCSI_IOCTL_GET_IDLUN: | |
1356 | case SCSI_IOCTL_GET_BUS_NUMBER: | |
8a6cfeb6 AB |
1357 | error = scsi_ioctl(sdp, cmd, p); |
1358 | break; | |
1da177e4 | 1359 | default: |
577ebb37 | 1360 | error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p); |
1da177e4 | 1361 | if (error != -ENOTTY) |
8a6cfeb6 AB |
1362 | break; |
1363 | error = scsi_ioctl(sdp, cmd, p); | |
1364 | break; | |
1da177e4 | 1365 | } |
8a6cfeb6 | 1366 | out: |
8a6cfeb6 | 1367 | return error; |
1da177e4 LT |
1368 | } |
1369 | ||
1370 | static void set_media_not_present(struct scsi_disk *sdkp) | |
1371 | { | |
2bae0093 TH |
1372 | if (sdkp->media_present) |
1373 | sdkp->device->changed = 1; | |
1374 | ||
1375 | if (sdkp->device->removable) { | |
1376 | sdkp->media_present = 0; | |
1377 | sdkp->capacity = 0; | |
1378 | } | |
1379 | } | |
1380 | ||
1381 | static int media_not_present(struct scsi_disk *sdkp, | |
1382 | struct scsi_sense_hdr *sshdr) | |
1383 | { | |
1384 | if (!scsi_sense_valid(sshdr)) | |
1385 | return 0; | |
1386 | ||
1387 | /* not invoked for commands that could return deferred errors */ | |
1388 | switch (sshdr->sense_key) { | |
1389 | case UNIT_ATTENTION: | |
1390 | case NOT_READY: | |
1391 | /* medium not present */ | |
1392 | if (sshdr->asc == 0x3A) { | |
1393 | set_media_not_present(sdkp); | |
1394 | return 1; | |
1395 | } | |
1396 | } | |
1397 | return 0; | |
1da177e4 LT |
1398 | } |
1399 | ||
1400 | /** | |
2bae0093 TH |
1401 | * sd_check_events - check media events |
1402 | * @disk: kernel device descriptor | |
1403 | * @clearing: disk events currently being cleared | |
1da177e4 | 1404 | * |
2bae0093 | 1405 | * Returns mask of DISK_EVENT_*. |
1da177e4 LT |
1406 | * |
1407 | * Note: this function is invoked from the block subsystem. | |
1408 | **/ | |
2bae0093 | 1409 | static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) |
1da177e4 | 1410 | { |
eb72d0bb HR |
1411 | struct scsi_disk *sdkp = scsi_disk_get(disk); |
1412 | struct scsi_device *sdp; | |
001aac25 | 1413 | struct scsi_sense_hdr *sshdr = NULL; |
1da177e4 LT |
1414 | int retval; |
1415 | ||
eb72d0bb HR |
1416 | if (!sdkp) |
1417 | return 0; | |
1418 | ||
1419 | sdp = sdkp->device; | |
2bae0093 | 1420 | SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); |
1da177e4 LT |
1421 | |
1422 | /* | |
1423 | * If the device is offline, don't send any commands - just pretend as | |
1424 | * if the command failed. If the device ever comes back online, we | |
1425 | * can deal with it then. It is only because of unrecoverable errors | |
1426 | * that we would ever take a device offline in the first place. | |
1427 | */ | |
285e9670 KS |
1428 | if (!scsi_device_online(sdp)) { |
1429 | set_media_not_present(sdkp); | |
285e9670 KS |
1430 | goto out; |
1431 | } | |
1da177e4 LT |
1432 | |
1433 | /* | |
1434 | * Using TEST_UNIT_READY enables differentiation between drive with | |
1435 | * no cartridge loaded - NOT READY, drive with changed cartridge - | |
1436 | * UNIT ATTENTION, or with same cartridge - GOOD STATUS. | |
1437 | * | |
1438 | * Drives that auto spin down. eg iomega jaz 1G, will be started | |
1439 | * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever | |
1440 | * sd_revalidate() is called. | |
1441 | */ | |
1442 | retval = -ENODEV; | |
285e9670 | 1443 | |
001aac25 JB |
1444 | if (scsi_block_when_processing_errors(sdp)) { |
1445 | sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); | |
1446 | retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, | |
1447 | sshdr); | |
1448 | } | |
1da177e4 | 1449 | |
2bae0093 TH |
1450 | /* failed to execute TUR, assume media not present */ |
1451 | if (host_byte(retval)) { | |
285e9670 | 1452 | set_media_not_present(sdkp); |
285e9670 KS |
1453 | goto out; |
1454 | } | |
1da177e4 | 1455 | |
2bae0093 TH |
1456 | if (media_not_present(sdkp, sshdr)) |
1457 | goto out; | |
1458 | ||
1da177e4 LT |
1459 | /* |
1460 | * For removable scsi disk we have to recognise the presence | |
2bae0093 | 1461 | * of a disk in the drive. |
1da177e4 | 1462 | */ |
2bae0093 TH |
1463 | if (!sdkp->media_present) |
1464 | sdp->changed = 1; | |
1da177e4 | 1465 | sdkp->media_present = 1; |
285e9670 | 1466 | out: |
3ff5588d | 1467 | /* |
2bae0093 | 1468 | * sdp->changed is set under the following conditions: |
3ff5588d | 1469 | * |
2bae0093 TH |
1470 | * Medium present state has changed in either direction. |
1471 | * Device has indicated UNIT_ATTENTION. | |
3ff5588d | 1472 | */ |
001aac25 | 1473 | kfree(sshdr); |
2bae0093 TH |
1474 | retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; |
1475 | sdp->changed = 0; | |
eb72d0bb | 1476 | scsi_disk_put(sdkp); |
1da177e4 | 1477 | return retval; |
1da177e4 LT |
1478 | } |
1479 | ||
e73aec82 | 1480 | static int sd_sync_cache(struct scsi_disk *sdkp) |
1da177e4 | 1481 | { |
1da177e4 | 1482 | int retries, res; |
e73aec82 | 1483 | struct scsi_device *sdp = sdkp->device; |
7e660100 JB |
1484 | const int timeout = sdp->request_queue->rq_timeout |
1485 | * SD_FLUSH_TIMEOUT_MULTIPLIER; | |
ea73a9f2 | 1486 | struct scsi_sense_hdr sshdr; |
1da177e4 LT |
1487 | |
1488 | if (!scsi_device_online(sdp)) | |
1489 | return -ENODEV; | |
1490 | ||
1da177e4 LT |
1491 | for (retries = 3; retries > 0; --retries) { |
1492 | unsigned char cmd[10] = { 0 }; | |
1493 | ||
1494 | cmd[0] = SYNCHRONIZE_CACHE; | |
1495 | /* | |
1496 | * Leave the rest of the command zero to indicate | |
1497 | * flush everything. | |
1498 | */ | |
9b21493c | 1499 | res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, |
7e660100 | 1500 | &sshdr, timeout, SD_MAX_RETRIES, |
e8064021 | 1501 | NULL, 0, RQF_PM); |
ea73a9f2 | 1502 | if (res == 0) |
1da177e4 LT |
1503 | break; |
1504 | } | |
1505 | ||
e73aec82 | 1506 | if (res) { |
ef61329d | 1507 | sd_print_result(sdkp, "Synchronize Cache(10) failed", res); |
95897910 | 1508 | |
e73aec82 MP |
1509 | if (driver_byte(res) & DRIVER_SENSE) |
1510 | sd_print_sense_hdr(sdkp, &sshdr); | |
95897910 ON |
1511 | /* we need to evaluate the error return */ |
1512 | if (scsi_sense_valid(&sshdr) && | |
7aae5134 AS |
1513 | (sshdr.asc == 0x3a || /* medium not present */ |
1514 | sshdr.asc == 0x20)) /* invalid command */ | |
95897910 ON |
1515 | /* this is no error here */ |
1516 | return 0; | |
1517 | ||
1518 | switch (host_byte(res)) { | |
1519 | /* ignore errors due to racing a disconnection */ | |
1520 | case DID_BAD_TARGET: | |
1521 | case DID_NO_CONNECT: | |
1522 | return 0; | |
1523 | /* signal the upper layer it might try again */ | |
1524 | case DID_BUS_BUSY: | |
1525 | case DID_IMM_RETRY: | |
1526 | case DID_REQUEUE: | |
1527 | case DID_SOFT_ERROR: | |
1528 | return -EBUSY; | |
1529 | default: | |
1530 | return -EIO; | |
1531 | } | |
1da177e4 | 1532 | } |
3721050a | 1533 | return 0; |
1da177e4 LT |
1534 | } |
1535 | ||
1da177e4 LT |
1536 | static void sd_rescan(struct device *dev) |
1537 | { | |
3d9a1f53 | 1538 | struct scsi_disk *sdkp = dev_get_drvdata(dev); |
39b7f1e2 | 1539 | |
3d9a1f53 | 1540 | revalidate_disk(sdkp->disk); |
1da177e4 LT |
1541 | } |
1542 | ||
1543 | ||
1544 | #ifdef CONFIG_COMPAT | |
1545 | /* | |
1546 | * This gets directly called from VFS. When the ioctl | |
1547 | * is not recognized we go back to the other translation paths. | |
1548 | */ | |
0338e291 AV |
1549 | static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode, |
1550 | unsigned int cmd, unsigned long arg) | |
1da177e4 | 1551 | { |
0338e291 | 1552 | struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device; |
21a9d4c9 | 1553 | int error; |
1da177e4 | 1554 | |
21a9d4c9 CH |
1555 | error = scsi_ioctl_block_when_processing_errors(sdev, cmd, |
1556 | (mode & FMODE_NDELAY) != 0); | |
1557 | if (error) | |
1558 | return error; | |
1da177e4 | 1559 | |
1da177e4 LT |
1560 | /* |
1561 | * Let the static ioctl translation table take care of it. | |
1562 | */ | |
21a9d4c9 CH |
1563 | if (!sdev->host->hostt->compat_ioctl) |
1564 | return -ENOIOCTLCMD; | |
1565 | return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg); | |
1da177e4 LT |
1566 | } |
1567 | #endif | |
1568 | ||
924d55b0 CH |
1569 | static char sd_pr_type(enum pr_type type) |
1570 | { | |
1571 | switch (type) { | |
1572 | case PR_WRITE_EXCLUSIVE: | |
1573 | return 0x01; | |
1574 | case PR_EXCLUSIVE_ACCESS: | |
1575 | return 0x03; | |
1576 | case PR_WRITE_EXCLUSIVE_REG_ONLY: | |
1577 | return 0x05; | |
1578 | case PR_EXCLUSIVE_ACCESS_REG_ONLY: | |
1579 | return 0x06; | |
1580 | case PR_WRITE_EXCLUSIVE_ALL_REGS: | |
1581 | return 0x07; | |
1582 | case PR_EXCLUSIVE_ACCESS_ALL_REGS: | |
1583 | return 0x08; | |
1584 | default: | |
1585 | return 0; | |
1586 | } | |
1587 | }; | |
1588 | ||
1589 | static int sd_pr_command(struct block_device *bdev, u8 sa, | |
1590 | u64 key, u64 sa_key, u8 type, u8 flags) | |
1591 | { | |
1592 | struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device; | |
1593 | struct scsi_sense_hdr sshdr; | |
1594 | int result; | |
1595 | u8 cmd[16] = { 0, }; | |
1596 | u8 data[24] = { 0, }; | |
1597 | ||
1598 | cmd[0] = PERSISTENT_RESERVE_OUT; | |
1599 | cmd[1] = sa; | |
1600 | cmd[2] = type; | |
1601 | put_unaligned_be32(sizeof(data), &cmd[5]); | |
1602 | ||
1603 | put_unaligned_be64(key, &data[0]); | |
1604 | put_unaligned_be64(sa_key, &data[8]); | |
1605 | data[20] = flags; | |
1606 | ||
1607 | result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data), | |
1608 | &sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL); | |
1609 | ||
1610 | if ((driver_byte(result) & DRIVER_SENSE) && | |
1611 | (scsi_sense_valid(&sshdr))) { | |
1612 | sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result); | |
1613 | scsi_print_sense_hdr(sdev, NULL, &sshdr); | |
1614 | } | |
1615 | ||
1616 | return result; | |
1617 | } | |
1618 | ||
1619 | static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key, | |
1620 | u32 flags) | |
1621 | { | |
1622 | if (flags & ~PR_FL_IGNORE_KEY) | |
1623 | return -EOPNOTSUPP; | |
1624 | return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00, | |
1625 | old_key, new_key, 0, | |
01f90dd9 | 1626 | (1 << 0) /* APTPL */); |
924d55b0 CH |
1627 | } |
1628 | ||
1629 | static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type, | |
1630 | u32 flags) | |
1631 | { | |
1632 | if (flags) | |
1633 | return -EOPNOTSUPP; | |
1634 | return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0); | |
1635 | } | |
1636 | ||
1637 | static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type) | |
1638 | { | |
1639 | return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0); | |
1640 | } | |
1641 | ||
1642 | static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key, | |
1643 | enum pr_type type, bool abort) | |
1644 | { | |
1645 | return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key, | |
1646 | sd_pr_type(type), 0); | |
1647 | } | |
1648 | ||
1649 | static int sd_pr_clear(struct block_device *bdev, u64 key) | |
1650 | { | |
1651 | return sd_pr_command(bdev, 0x03, key, 0, 0, 0); | |
1652 | } | |
1653 | ||
1654 | static const struct pr_ops sd_pr_ops = { | |
1655 | .pr_register = sd_pr_register, | |
1656 | .pr_reserve = sd_pr_reserve, | |
1657 | .pr_release = sd_pr_release, | |
1658 | .pr_preempt = sd_pr_preempt, | |
1659 | .pr_clear = sd_pr_clear, | |
1660 | }; | |
1661 | ||
83d5cde4 | 1662 | static const struct block_device_operations sd_fops = { |
1da177e4 | 1663 | .owner = THIS_MODULE, |
0338e291 AV |
1664 | .open = sd_open, |
1665 | .release = sd_release, | |
8a6cfeb6 | 1666 | .ioctl = sd_ioctl, |
a885c8c4 | 1667 | .getgeo = sd_getgeo, |
1da177e4 | 1668 | #ifdef CONFIG_COMPAT |
0338e291 | 1669 | .compat_ioctl = sd_compat_ioctl, |
1da177e4 | 1670 | #endif |
2bae0093 | 1671 | .check_events = sd_check_events, |
1da177e4 | 1672 | .revalidate_disk = sd_revalidate_disk, |
72ec24bd | 1673 | .unlock_native_capacity = sd_unlock_native_capacity, |
924d55b0 | 1674 | .pr_ops = &sd_pr_ops, |
1da177e4 LT |
1675 | }; |
1676 | ||
18a4d0a2 MP |
1677 | /** |
1678 | * sd_eh_action - error handling callback | |
1679 | * @scmd: sd-issued command that has failed | |
18a4d0a2 MP |
1680 | * @eh_disp: The recovery disposition suggested by the midlayer |
1681 | * | |
2451079b JB |
1682 | * This function is called by the SCSI midlayer upon completion of an |
1683 | * error test command (currently TEST UNIT READY). The result of sending | |
1684 | * the eh command is passed in eh_disp. We're looking for devices that | |
1685 | * fail medium access commands but are OK with non access commands like | |
1686 | * test unit ready (so wrongly see the device as having a successful | |
1687 | * recovery) | |
18a4d0a2 | 1688 | **/ |
2451079b | 1689 | static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp) |
18a4d0a2 MP |
1690 | { |
1691 | struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk); | |
1692 | ||
1693 | if (!scsi_device_online(scmd->device) || | |
2451079b JB |
1694 | !scsi_medium_access_command(scmd) || |
1695 | host_byte(scmd->result) != DID_TIME_OUT || | |
1696 | eh_disp != SUCCESS) | |
18a4d0a2 MP |
1697 | return eh_disp; |
1698 | ||
1699 | /* | |
1700 | * The device has timed out executing a medium access command. | |
1701 | * However, the TEST UNIT READY command sent during error | |
1702 | * handling completed successfully. Either the device is in the | |
1703 | * process of recovering or has it suffered an internal failure | |
1704 | * that prevents access to the storage medium. | |
1705 | */ | |
2451079b | 1706 | sdkp->medium_access_timed_out++; |
18a4d0a2 MP |
1707 | |
1708 | /* | |
1709 | * If the device keeps failing read/write commands but TEST UNIT | |
1710 | * READY always completes successfully we assume that medium | |
1711 | * access is no longer possible and take the device offline. | |
1712 | */ | |
1713 | if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) { | |
1714 | scmd_printk(KERN_ERR, scmd, | |
1715 | "Medium access timeout failure. Offlining disk!\n"); | |
1716 | scsi_device_set_state(scmd->device, SDEV_OFFLINE); | |
1717 | ||
1718 | return FAILED; | |
1719 | } | |
1720 | ||
1721 | return eh_disp; | |
1722 | } | |
1723 | ||
af55ff67 MP |
1724 | static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) |
1725 | { | |
83096ebf TH |
1726 | u64 start_lba = blk_rq_pos(scmd->request); |
1727 | u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512); | |
74856fbf | 1728 | u64 factor = scmd->device->sector_size / 512; |
af55ff67 MP |
1729 | u64 bad_lba; |
1730 | int info_valid; | |
a8733c7b JB |
1731 | /* |
1732 | * resid is optional but mostly filled in. When it's unused, | |
1733 | * its value is zero, so we assume the whole buffer transferred | |
1734 | */ | |
1735 | unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd); | |
1736 | unsigned int good_bytes; | |
af55ff67 | 1737 | |
33659ebb | 1738 | if (scmd->request->cmd_type != REQ_TYPE_FS) |
af55ff67 MP |
1739 | return 0; |
1740 | ||
1741 | info_valid = scsi_get_sense_info_fld(scmd->sense_buffer, | |
1742 | SCSI_SENSE_BUFFERSIZE, | |
1743 | &bad_lba); | |
1744 | if (!info_valid) | |
1745 | return 0; | |
1746 | ||
1747 | if (scsi_bufflen(scmd) <= scmd->device->sector_size) | |
1748 | return 0; | |
1749 | ||
74856fbf MH |
1750 | /* be careful ... don't want any overflows */ |
1751 | do_div(start_lba, factor); | |
1752 | do_div(end_lba, factor); | |
af55ff67 MP |
1753 | |
1754 | /* The bad lba was reported incorrectly, we have no idea where | |
1755 | * the error is. | |
1756 | */ | |
1757 | if (bad_lba < start_lba || bad_lba >= end_lba) | |
1758 | return 0; | |
1759 | ||
1760 | /* This computation should always be done in terms of | |
1761 | * the resolution of the device's medium. | |
1762 | */ | |
a8733c7b JB |
1763 | good_bytes = (bad_lba - start_lba) * scmd->device->sector_size; |
1764 | return min(good_bytes, transferred); | |
af55ff67 MP |
1765 | } |
1766 | ||
1da177e4 | 1767 | /** |
7b3d9545 | 1768 | * sd_done - bottom half handler: called when the lower level |
1da177e4 LT |
1769 | * driver has completed (successfully or otherwise) a scsi command. |
1770 | * @SCpnt: mid-level's per command structure. | |
1771 | * | |
1772 | * Note: potentially run from within an ISR. Must not block. | |
1773 | **/ | |
7b3d9545 | 1774 | static int sd_done(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1775 | { |
1776 | int result = SCpnt->result; | |
af55ff67 | 1777 | unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); |
1da177e4 | 1778 | struct scsi_sense_hdr sshdr; |
4e7392ec | 1779 | struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); |
26e85fcd | 1780 | struct request *req = SCpnt->request; |
1da177e4 LT |
1781 | int sense_valid = 0; |
1782 | int sense_deferred = 0; | |
c98a0eb0 | 1783 | unsigned char op = SCpnt->cmnd[0]; |
5db44863 | 1784 | unsigned char unmap = SCpnt->cmnd[1] & 8; |
1da177e4 | 1785 | |
89d94756 HR |
1786 | switch (req_op(req)) { |
1787 | case REQ_OP_DISCARD: | |
1788 | case REQ_OP_WRITE_SAME: | |
1789 | case REQ_OP_ZONE_RESET: | |
26e85fcd MP |
1790 | if (!result) { |
1791 | good_bytes = blk_rq_bytes(req); | |
1792 | scsi_set_resid(SCpnt, 0); | |
1793 | } else { | |
1794 | good_bytes = 0; | |
1795 | scsi_set_resid(SCpnt, blk_rq_bytes(req)); | |
1796 | } | |
89d94756 HR |
1797 | break; |
1798 | case REQ_OP_ZONE_REPORT: | |
1799 | if (!result) { | |
1800 | good_bytes = scsi_bufflen(SCpnt) | |
1801 | - scsi_get_resid(SCpnt); | |
1802 | scsi_set_resid(SCpnt, 0); | |
1803 | } else { | |
1804 | good_bytes = 0; | |
1805 | scsi_set_resid(SCpnt, blk_rq_bytes(req)); | |
1806 | } | |
1807 | break; | |
26e85fcd | 1808 | } |
6a32a8ae | 1809 | |
1da177e4 LT |
1810 | if (result) { |
1811 | sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); | |
1812 | if (sense_valid) | |
1813 | sense_deferred = scsi_sense_is_deferred(&sshdr); | |
1814 | } | |
2a863ba8 DJ |
1815 | sdkp->medium_access_timed_out = 0; |
1816 | ||
03aba2f7 LT |
1817 | if (driver_byte(result) != DRIVER_SENSE && |
1818 | (!sense_valid || sense_deferred)) | |
1819 | goto out; | |
1820 | ||
1821 | switch (sshdr.sense_key) { | |
1822 | case HARDWARE_ERROR: | |
1823 | case MEDIUM_ERROR: | |
af55ff67 | 1824 | good_bytes = sd_completed_bytes(SCpnt); |
03aba2f7 LT |
1825 | break; |
1826 | case RECOVERED_ERROR: | |
af55ff67 MP |
1827 | good_bytes = scsi_bufflen(SCpnt); |
1828 | break; | |
10dab226 JW |
1829 | case NO_SENSE: |
1830 | /* This indicates a false check condition, so ignore it. An | |
1831 | * unknown amount of data was transferred so treat it as an | |
1832 | * error. | |
1833 | */ | |
10dab226 JW |
1834 | SCpnt->result = 0; |
1835 | memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); | |
1836 | break; | |
c98a0eb0 MP |
1837 | case ABORTED_COMMAND: |
1838 | if (sshdr.asc == 0x10) /* DIF: Target detected corruption */ | |
1839 | good_bytes = sd_completed_bytes(SCpnt); | |
1840 | break; | |
1841 | case ILLEGAL_REQUEST: | |
1842 | if (sshdr.asc == 0x10) /* DIX: Host detected corruption */ | |
af55ff67 | 1843 | good_bytes = sd_completed_bytes(SCpnt); |
c98a0eb0 | 1844 | /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ |
5db44863 MP |
1845 | if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { |
1846 | switch (op) { | |
1847 | case UNMAP: | |
1848 | sd_config_discard(sdkp, SD_LBP_DISABLE); | |
1849 | break; | |
1850 | case WRITE_SAME_16: | |
1851 | case WRITE_SAME: | |
1852 | if (unmap) | |
1853 | sd_config_discard(sdkp, SD_LBP_DISABLE); | |
1854 | else { | |
1855 | sdkp->device->no_write_same = 1; | |
1856 | sd_config_write_same(sdkp); | |
1857 | ||
1858 | good_bytes = 0; | |
1859 | req->__data_len = blk_rq_bytes(req); | |
e8064021 | 1860 | req->rq_flags |= RQF_QUIET; |
5db44863 MP |
1861 | } |
1862 | } | |
1863 | } | |
03aba2f7 LT |
1864 | break; |
1865 | default: | |
1866 | break; | |
1da177e4 | 1867 | } |
89d94756 | 1868 | |
03aba2f7 | 1869 | out: |
89d94756 HR |
1870 | if (sd_is_zoned(sdkp)) |
1871 | sd_zbc_complete(SCpnt, good_bytes, &sshdr); | |
1872 | ||
ef61329d HR |
1873 | SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt, |
1874 | "sd_done: completed %d of %d bytes\n", | |
1875 | good_bytes, scsi_bufflen(SCpnt))); | |
1876 | ||
af55ff67 MP |
1877 | if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt)) |
1878 | sd_dif_complete(SCpnt, good_bytes); | |
1879 | ||
7b3d9545 | 1880 | return good_bytes; |
1da177e4 LT |
1881 | } |
1882 | ||
1da177e4 LT |
1883 | /* |
1884 | * spinup disk - called only in sd_revalidate_disk() | |
1885 | */ | |
1886 | static void | |
e73aec82 | 1887 | sd_spinup_disk(struct scsi_disk *sdkp) |
ea73a9f2 | 1888 | { |
1da177e4 | 1889 | unsigned char cmd[10]; |
4451e472 | 1890 | unsigned long spintime_expire = 0; |
1da177e4 LT |
1891 | int retries, spintime; |
1892 | unsigned int the_result; | |
1893 | struct scsi_sense_hdr sshdr; | |
1894 | int sense_valid = 0; | |
1895 | ||
1896 | spintime = 0; | |
1897 | ||
1898 | /* Spin up drives, as required. Only do this at boot time */ | |
1899 | /* Spinup needs to be done for module loads too. */ | |
1900 | do { | |
1901 | retries = 0; | |
1902 | ||
1903 | do { | |
1904 | cmd[0] = TEST_UNIT_READY; | |
1905 | memset((void *) &cmd[1], 0, 9); | |
1906 | ||
ea73a9f2 JB |
1907 | the_result = scsi_execute_req(sdkp->device, cmd, |
1908 | DMA_NONE, NULL, 0, | |
1909 | &sshdr, SD_TIMEOUT, | |
f4f4e47e | 1910 | SD_MAX_RETRIES, NULL); |
1da177e4 | 1911 | |
b4d38e38 AS |
1912 | /* |
1913 | * If the drive has indicated to us that it | |
1914 | * doesn't have any media in it, don't bother | |
1915 | * with any more polling. | |
1916 | */ | |
1917 | if (media_not_present(sdkp, &sshdr)) | |
1918 | return; | |
1919 | ||
1da177e4 | 1920 | if (the_result) |
ea73a9f2 | 1921 | sense_valid = scsi_sense_valid(&sshdr); |
1da177e4 LT |
1922 | retries++; |
1923 | } while (retries < 3 && | |
1924 | (!scsi_status_is_good(the_result) || | |
1925 | ((driver_byte(the_result) & DRIVER_SENSE) && | |
1926 | sense_valid && sshdr.sense_key == UNIT_ATTENTION))); | |
1927 | ||
1da177e4 LT |
1928 | if ((driver_byte(the_result) & DRIVER_SENSE) == 0) { |
1929 | /* no sense, TUR either succeeded or failed | |
1930 | * with a status error */ | |
e73aec82 | 1931 | if(!spintime && !scsi_status_is_good(the_result)) { |
ef61329d HR |
1932 | sd_print_result(sdkp, "Test Unit Ready failed", |
1933 | the_result); | |
e73aec82 | 1934 | } |
1da177e4 LT |
1935 | break; |
1936 | } | |
ef61329d | 1937 | |
1da177e4 LT |
1938 | /* |
1939 | * The device does not want the automatic start to be issued. | |
1940 | */ | |
33dd6f92 | 1941 | if (sdkp->device->no_start_on_add) |
1da177e4 | 1942 | break; |
1da177e4 | 1943 | |
33dd6f92 MW |
1944 | if (sense_valid && sshdr.sense_key == NOT_READY) { |
1945 | if (sshdr.asc == 4 && sshdr.ascq == 3) | |
1946 | break; /* manual intervention required */ | |
1947 | if (sshdr.asc == 4 && sshdr.ascq == 0xb) | |
1948 | break; /* standby */ | |
1949 | if (sshdr.asc == 4 && sshdr.ascq == 0xc) | |
1950 | break; /* unavailable */ | |
1951 | /* | |
1952 | * Issue command to spin up drive when not ready | |
1953 | */ | |
1da177e4 | 1954 | if (!spintime) { |
e73aec82 | 1955 | sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); |
1da177e4 LT |
1956 | cmd[0] = START_STOP; |
1957 | cmd[1] = 1; /* Return immediately */ | |
1958 | memset((void *) &cmd[2], 0, 8); | |
1959 | cmd[4] = 1; /* Start spin cycle */ | |
d2886ea3 SR |
1960 | if (sdkp->device->start_stop_pwr_cond) |
1961 | cmd[4] |= 1 << 4; | |
ea73a9f2 JB |
1962 | scsi_execute_req(sdkp->device, cmd, DMA_NONE, |
1963 | NULL, 0, &sshdr, | |
f4f4e47e FT |
1964 | SD_TIMEOUT, SD_MAX_RETRIES, |
1965 | NULL); | |
4451e472 AS |
1966 | spintime_expire = jiffies + 100 * HZ; |
1967 | spintime = 1; | |
1da177e4 | 1968 | } |
1da177e4 LT |
1969 | /* Wait 1 second for next try */ |
1970 | msleep(1000); | |
1971 | printk("."); | |
4451e472 AS |
1972 | |
1973 | /* | |
1974 | * Wait for USB flash devices with slow firmware. | |
1975 | * Yes, this sense key/ASC combination shouldn't | |
1976 | * occur here. It's characteristic of these devices. | |
1977 | */ | |
1978 | } else if (sense_valid && | |
1979 | sshdr.sense_key == UNIT_ATTENTION && | |
1980 | sshdr.asc == 0x28) { | |
1981 | if (!spintime) { | |
1982 | spintime_expire = jiffies + 5 * HZ; | |
1983 | spintime = 1; | |
1984 | } | |
1985 | /* Wait 1 second for next try */ | |
1986 | msleep(1000); | |
1da177e4 LT |
1987 | } else { |
1988 | /* we don't understand the sense code, so it's | |
1989 | * probably pointless to loop */ | |
1990 | if(!spintime) { | |
e73aec82 MP |
1991 | sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); |
1992 | sd_print_sense_hdr(sdkp, &sshdr); | |
1da177e4 LT |
1993 | } |
1994 | break; | |
1995 | } | |
1996 | ||
4451e472 | 1997 | } while (spintime && time_before_eq(jiffies, spintime_expire)); |
1da177e4 LT |
1998 | |
1999 | if (spintime) { | |
2000 | if (scsi_status_is_good(the_result)) | |
2001 | printk("ready\n"); | |
2002 | else | |
2003 | printk("not responding...\n"); | |
2004 | } | |
2005 | } | |
2006 | ||
e0597d70 MP |
2007 | /* |
2008 | * Determine whether disk supports Data Integrity Field. | |
2009 | */ | |
fe542396 | 2010 | static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) |
e0597d70 MP |
2011 | { |
2012 | struct scsi_device *sdp = sdkp->device; | |
2013 | u8 type; | |
fe542396 | 2014 | int ret = 0; |
e0597d70 MP |
2015 | |
2016 | if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) | |
fe542396 | 2017 | return ret; |
35e1a5d9 MP |
2018 | |
2019 | type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ | |
2020 | ||
8475c811 | 2021 | if (type > T10_PI_TYPE3_PROTECTION) |
fe542396 MP |
2022 | ret = -ENODEV; |
2023 | else if (scsi_host_dif_capable(sdp->host, type)) | |
2024 | ret = 1; | |
2025 | ||
2026 | if (sdkp->first_scan || type != sdkp->protection_type) | |
2027 | switch (ret) { | |
2028 | case -ENODEV: | |
2029 | sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \ | |
2030 | " protection type %u. Disabling disk!\n", | |
2031 | type); | |
2032 | break; | |
2033 | case 1: | |
2034 | sd_printk(KERN_NOTICE, sdkp, | |
2035 | "Enabling DIF Type %u protection\n", type); | |
2036 | break; | |
2037 | case 0: | |
2038 | sd_printk(KERN_NOTICE, sdkp, | |
2039 | "Disabling DIF Type %u protection\n", type); | |
2040 | break; | |
2041 | } | |
e0597d70 | 2042 | |
be922f47 MP |
2043 | sdkp->protection_type = type; |
2044 | ||
fe542396 | 2045 | return ret; |
e0597d70 MP |
2046 | } |
2047 | ||
0da205e0 MW |
2048 | static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, |
2049 | struct scsi_sense_hdr *sshdr, int sense_valid, | |
2050 | int the_result) | |
2051 | { | |
0da205e0 MW |
2052 | if (driver_byte(the_result) & DRIVER_SENSE) |
2053 | sd_print_sense_hdr(sdkp, sshdr); | |
2054 | else | |
2055 | sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); | |
2056 | ||
2057 | /* | |
2058 | * Set dirty bit for removable devices if not ready - | |
2059 | * sometimes drives will not report this properly. | |
2060 | */ | |
2061 | if (sdp->removable && | |
2062 | sense_valid && sshdr->sense_key == NOT_READY) | |
2bae0093 | 2063 | set_media_not_present(sdkp); |
0da205e0 MW |
2064 | |
2065 | /* | |
2066 | * We used to set media_present to 0 here to indicate no media | |
2067 | * in the drive, but some drives fail read capacity even with | |
2068 | * media present, so we can't do that. | |
2069 | */ | |
2070 | sdkp->capacity = 0; /* unknown mapped to zero - as usual */ | |
2071 | } | |
2072 | ||
2073 | #define RC16_LEN 32 | |
2074 | #if RC16_LEN > SD_BUF_SIZE | |
2075 | #error RC16_LEN must not be more than SD_BUF_SIZE | |
2076 | #endif | |
2077 | ||
3233ac19 JB |
2078 | #define READ_CAPACITY_RETRIES_ON_RESET 10 |
2079 | ||
0da205e0 MW |
2080 | static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, |
2081 | unsigned char *buffer) | |
ea73a9f2 | 2082 | { |
1da177e4 | 2083 | unsigned char cmd[16]; |
1da177e4 LT |
2084 | struct scsi_sense_hdr sshdr; |
2085 | int sense_valid = 0; | |
0da205e0 | 2086 | int the_result; |
3233ac19 | 2087 | int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; |
ea09bcc9 | 2088 | unsigned int alignment; |
0da205e0 MW |
2089 | unsigned long long lba; |
2090 | unsigned sector_size; | |
1da177e4 | 2091 | |
5ce524bd HG |
2092 | if (sdp->no_read_capacity_16) |
2093 | return -EINVAL; | |
2094 | ||
1da177e4 | 2095 | do { |
0da205e0 | 2096 | memset(cmd, 0, 16); |
eb846d9f | 2097 | cmd[0] = SERVICE_ACTION_IN_16; |
0da205e0 MW |
2098 | cmd[1] = SAI_READ_CAPACITY_16; |
2099 | cmd[13] = RC16_LEN; | |
2100 | memset(buffer, 0, RC16_LEN); | |
2101 | ||
ea73a9f2 | 2102 | the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, |
0da205e0 MW |
2103 | buffer, RC16_LEN, &sshdr, |
2104 | SD_TIMEOUT, SD_MAX_RETRIES, NULL); | |
1da177e4 | 2105 | |
ea73a9f2 | 2106 | if (media_not_present(sdkp, &sshdr)) |
0da205e0 | 2107 | return -ENODEV; |
1da177e4 | 2108 | |
2b301307 | 2109 | if (the_result) { |
ea73a9f2 | 2110 | sense_valid = scsi_sense_valid(&sshdr); |
2b301307 MW |
2111 | if (sense_valid && |
2112 | sshdr.sense_key == ILLEGAL_REQUEST && | |
2113 | (sshdr.asc == 0x20 || sshdr.asc == 0x24) && | |
2114 | sshdr.ascq == 0x00) | |
2115 | /* Invalid Command Operation Code or | |
2116 | * Invalid Field in CDB, just retry | |
2117 | * silently with RC10 */ | |
2118 | return -EINVAL; | |
3233ac19 JB |
2119 | if (sense_valid && |
2120 | sshdr.sense_key == UNIT_ATTENTION && | |
2121 | sshdr.asc == 0x29 && sshdr.ascq == 0x00) | |
2122 | /* Device reset might occur several times, | |
2123 | * give it one more chance */ | |
2124 | if (--reset_retries > 0) | |
2125 | continue; | |
2b301307 | 2126 | } |
1da177e4 LT |
2127 | retries--; |
2128 | ||
2129 | } while (the_result && retries); | |
2130 | ||
0da205e0 | 2131 | if (the_result) { |
ef61329d | 2132 | sd_print_result(sdkp, "Read Capacity(16) failed", the_result); |
0da205e0 MW |
2133 | read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); |
2134 | return -EINVAL; | |
2135 | } | |
e73aec82 | 2136 | |
8f76d151 DH |
2137 | sector_size = get_unaligned_be32(&buffer[8]); |
2138 | lba = get_unaligned_be64(&buffer[0]); | |
0da205e0 | 2139 | |
fe542396 MP |
2140 | if (sd_read_protection_type(sdkp, buffer) < 0) { |
2141 | sdkp->capacity = 0; | |
2142 | return -ENODEV; | |
2143 | } | |
0da205e0 MW |
2144 | |
2145 | if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) { | |
2146 | sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " | |
2147 | "kernel compiled with support for large block " | |
2148 | "devices.\n"); | |
2149 | sdkp->capacity = 0; | |
2150 | return -EOVERFLOW; | |
2151 | } | |
2152 | ||
ea09bcc9 | 2153 | /* Logical blocks per physical block exponent */ |
526f7c79 | 2154 | sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size; |
ea09bcc9 | 2155 | |
89d94756 HR |
2156 | /* RC basis */ |
2157 | sdkp->rc_basis = (buffer[12] >> 4) & 0x3; | |
2158 | ||
ea09bcc9 MP |
2159 | /* Lowest aligned logical block */ |
2160 | alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size; | |
2161 | blk_queue_alignment_offset(sdp->request_queue, alignment); | |
2162 | if (alignment && sdkp->first_scan) | |
2163 | sd_printk(KERN_NOTICE, sdkp, | |
2164 | "physical block alignment offset: %u\n", alignment); | |
2165 | ||
c98a0eb0 MP |
2166 | if (buffer[14] & 0x80) { /* LBPME */ |
2167 | sdkp->lbpme = 1; | |
e339c1a7 | 2168 | |
c98a0eb0 MP |
2169 | if (buffer[14] & 0x40) /* LBPRZ */ |
2170 | sdkp->lbprz = 1; | |
e339c1a7 | 2171 | |
c98a0eb0 | 2172 | sd_config_discard(sdkp, SD_LBP_WS16); |
e339c1a7 MP |
2173 | } |
2174 | ||
0da205e0 MW |
2175 | sdkp->capacity = lba + 1; |
2176 | return sector_size; | |
2177 | } | |
2178 | ||
2179 | static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, | |
2180 | unsigned char *buffer) | |
2181 | { | |
2182 | unsigned char cmd[16]; | |
2183 | struct scsi_sense_hdr sshdr; | |
2184 | int sense_valid = 0; | |
2185 | int the_result; | |
3233ac19 | 2186 | int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; |
0da205e0 MW |
2187 | sector_t lba; |
2188 | unsigned sector_size; | |
2189 | ||
2190 | do { | |
2191 | cmd[0] = READ_CAPACITY; | |
2192 | memset(&cmd[1], 0, 9); | |
2193 | memset(buffer, 0, 8); | |
2194 | ||
2195 | the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, | |
2196 | buffer, 8, &sshdr, | |
2197 | SD_TIMEOUT, SD_MAX_RETRIES, NULL); | |
2198 | ||
2199 | if (media_not_present(sdkp, &sshdr)) | |
2200 | return -ENODEV; | |
2201 | ||
3233ac19 | 2202 | if (the_result) { |
0da205e0 | 2203 | sense_valid = scsi_sense_valid(&sshdr); |
3233ac19 JB |
2204 | if (sense_valid && |
2205 | sshdr.sense_key == UNIT_ATTENTION && | |
2206 | sshdr.asc == 0x29 && sshdr.ascq == 0x00) | |
2207 | /* Device reset might occur several times, | |
2208 | * give it one more chance */ | |
2209 | if (--reset_retries > 0) | |
2210 | continue; | |
2211 | } | |
0da205e0 MW |
2212 | retries--; |
2213 | ||
2214 | } while (the_result && retries); | |
2215 | ||
2216 | if (the_result) { | |
ef61329d | 2217 | sd_print_result(sdkp, "Read Capacity(10) failed", the_result); |
0da205e0 MW |
2218 | read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); |
2219 | return -EINVAL; | |
2220 | } | |
2221 | ||
8f76d151 DH |
2222 | sector_size = get_unaligned_be32(&buffer[4]); |
2223 | lba = get_unaligned_be32(&buffer[0]); | |
0da205e0 | 2224 | |
5ce524bd HG |
2225 | if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) { |
2226 | /* Some buggy (usb cardreader) devices return an lba of | |
2227 | 0xffffffff when the want to report a size of 0 (with | |
2228 | which they really mean no media is present) */ | |
2229 | sdkp->capacity = 0; | |
5cc10350 | 2230 | sdkp->physical_block_size = sector_size; |
5ce524bd HG |
2231 | return sector_size; |
2232 | } | |
2233 | ||
0da205e0 MW |
2234 | if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { |
2235 | sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " | |
2236 | "kernel compiled with support for large block " | |
2237 | "devices.\n"); | |
2238 | sdkp->capacity = 0; | |
2239 | return -EOVERFLOW; | |
2240 | } | |
2241 | ||
2242 | sdkp->capacity = lba + 1; | |
526f7c79 | 2243 | sdkp->physical_block_size = sector_size; |
0da205e0 MW |
2244 | return sector_size; |
2245 | } | |
2246 | ||
2b301307 MW |
2247 | static int sd_try_rc16_first(struct scsi_device *sdp) |
2248 | { | |
f87146bb HR |
2249 | if (sdp->host->max_cmd_len < 16) |
2250 | return 0; | |
6a0bdffa AS |
2251 | if (sdp->try_rc_10_first) |
2252 | return 0; | |
2b301307 MW |
2253 | if (sdp->scsi_level > SCSI_SPC_2) |
2254 | return 1; | |
2255 | if (scsi_device_protection(sdp)) | |
2256 | return 1; | |
2257 | return 0; | |
2258 | } | |
2259 | ||
0da205e0 MW |
2260 | /* |
2261 | * read disk capacity | |
2262 | */ | |
2263 | static void | |
2264 | sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) | |
2265 | { | |
2266 | int sector_size; | |
2267 | struct scsi_device *sdp = sdkp->device; | |
2268 | ||
2b301307 | 2269 | if (sd_try_rc16_first(sdp)) { |
0da205e0 MW |
2270 | sector_size = read_capacity_16(sdkp, sdp, buffer); |
2271 | if (sector_size == -EOVERFLOW) | |
1da177e4 | 2272 | goto got_data; |
2b301307 MW |
2273 | if (sector_size == -ENODEV) |
2274 | return; | |
2275 | if (sector_size < 0) | |
2276 | sector_size = read_capacity_10(sdkp, sdp, buffer); | |
0da205e0 MW |
2277 | if (sector_size < 0) |
2278 | return; | |
1da177e4 | 2279 | } else { |
0da205e0 MW |
2280 | sector_size = read_capacity_10(sdkp, sdp, buffer); |
2281 | if (sector_size == -EOVERFLOW) | |
2282 | goto got_data; | |
2283 | if (sector_size < 0) | |
2284 | return; | |
2285 | if ((sizeof(sdkp->capacity) > 4) && | |
2286 | (sdkp->capacity > 0xffffffffULL)) { | |
2287 | int old_sector_size = sector_size; | |
2288 | sd_printk(KERN_NOTICE, sdkp, "Very big device. " | |
2289 | "Trying to use READ CAPACITY(16).\n"); | |
2290 | sector_size = read_capacity_16(sdkp, sdp, buffer); | |
2291 | if (sector_size < 0) { | |
2292 | sd_printk(KERN_NOTICE, sdkp, | |
2293 | "Using 0xffffffff as device size\n"); | |
2294 | sdkp->capacity = 1 + (sector_t) 0xffffffff; | |
2295 | sector_size = old_sector_size; | |
2296 | goto got_data; | |
2297 | } | |
2298 | } | |
2299 | } | |
1da177e4 | 2300 | |
5c211caa AS |
2301 | /* Some devices are known to return the total number of blocks, |
2302 | * not the highest block number. Some devices have versions | |
2303 | * which do this and others which do not. Some devices we might | |
2304 | * suspect of doing this but we don't know for certain. | |
2305 | * | |
2306 | * If we know the reported capacity is wrong, decrement it. If | |
2307 | * we can only guess, then assume the number of blocks is even | |
2308 | * (usually true but not always) and err on the side of lowering | |
2309 | * the capacity. | |
2310 | */ | |
2311 | if (sdp->fix_capacity || | |
2312 | (sdp->guess_capacity && (sdkp->capacity & 0x01))) { | |
2313 | sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " | |
2314 | "from its reported value: %llu\n", | |
2315 | (unsigned long long) sdkp->capacity); | |
1da177e4 | 2316 | --sdkp->capacity; |
61bf54b7 ON |
2317 | } |
2318 | ||
1da177e4 LT |
2319 | got_data: |
2320 | if (sector_size == 0) { | |
2321 | sector_size = 512; | |
e73aec82 MP |
2322 | sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, " |
2323 | "assuming 512.\n"); | |
1da177e4 LT |
2324 | } |
2325 | ||
2326 | if (sector_size != 512 && | |
2327 | sector_size != 1024 && | |
2328 | sector_size != 2048 && | |
74856fbf | 2329 | sector_size != 4096) { |
e73aec82 MP |
2330 | sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n", |
2331 | sector_size); | |
1da177e4 LT |
2332 | /* |
2333 | * The user might want to re-format the drive with | |
2334 | * a supported sectorsize. Once this happens, it | |
2335 | * would be relatively trivial to set the thing up. | |
2336 | * For this reason, we leave the thing in the table. | |
2337 | */ | |
2338 | sdkp->capacity = 0; | |
2339 | /* | |
2340 | * set a bogus sector size so the normal read/write | |
2341 | * logic in the block layer will eventually refuse any | |
2342 | * request on this device without tripping over power | |
2343 | * of two sector size assumptions | |
2344 | */ | |
2345 | sector_size = 512; | |
2346 | } | |
e1defc4f | 2347 | blk_queue_logical_block_size(sdp->request_queue, sector_size); |
89d94756 HR |
2348 | blk_queue_physical_block_size(sdp->request_queue, |
2349 | sdkp->physical_block_size); | |
2350 | sdkp->device->sector_size = sector_size; | |
7404ad3b | 2351 | |
89d94756 HR |
2352 | if (sdkp->capacity > 0xffffffff) |
2353 | sdp->use_16_for_rw = 1; | |
1da177e4 | 2354 | |
89d94756 | 2355 | } |
1da177e4 | 2356 | |
89d94756 HR |
2357 | /* |
2358 | * Print disk capacity | |
2359 | */ | |
2360 | static void | |
2361 | sd_print_capacity(struct scsi_disk *sdkp, | |
2362 | sector_t old_capacity) | |
2363 | { | |
2364 | int sector_size = sdkp->device->sector_size; | |
2365 | char cap_str_2[10], cap_str_10[10]; | |
ea09bcc9 | 2366 | |
89d94756 HR |
2367 | string_get_size(sdkp->capacity, sector_size, |
2368 | STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); | |
2369 | string_get_size(sdkp->capacity, sector_size, | |
2370 | STRING_UNITS_10, cap_str_10, | |
2371 | sizeof(cap_str_10)); | |
1da177e4 | 2372 | |
89d94756 HR |
2373 | if (sdkp->first_scan || old_capacity != sdkp->capacity) { |
2374 | sd_printk(KERN_NOTICE, sdkp, | |
2375 | "%llu %d-byte logical blocks: (%s/%s)\n", | |
2376 | (unsigned long long)sdkp->capacity, | |
2377 | sector_size, cap_str_10, cap_str_2); | |
53ad570b | 2378 | |
89d94756 HR |
2379 | if (sdkp->physical_block_size != sector_size) |
2380 | sd_printk(KERN_NOTICE, sdkp, | |
2381 | "%u-byte physical blocks\n", | |
2382 | sdkp->physical_block_size); | |
2383 | ||
2384 | sd_zbc_print_zones(sdkp); | |
2385 | } | |
1da177e4 LT |
2386 | } |
2387 | ||
2388 | /* called with buffer of length 512 */ | |
2389 | static inline int | |
ea73a9f2 JB |
2390 | sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage, |
2391 | unsigned char *buffer, int len, struct scsi_mode_data *data, | |
2392 | struct scsi_sense_hdr *sshdr) | |
1da177e4 | 2393 | { |
ea73a9f2 | 2394 | return scsi_mode_sense(sdp, dbd, modepage, buffer, len, |
1cf72699 | 2395 | SD_TIMEOUT, SD_MAX_RETRIES, data, |
ea73a9f2 | 2396 | sshdr); |
1da177e4 LT |
2397 | } |
2398 | ||
2399 | /* | |
2400 | * read write protect setting, if possible - called only in sd_revalidate_disk() | |
48970800 | 2401 | * called with buffer of length SD_BUF_SIZE |
1da177e4 LT |
2402 | */ |
2403 | static void | |
e73aec82 | 2404 | sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) |
ea73a9f2 | 2405 | { |
1da177e4 | 2406 | int res; |
ea73a9f2 | 2407 | struct scsi_device *sdp = sdkp->device; |
1da177e4 | 2408 | struct scsi_mode_data data; |
70a9b873 | 2409 | int old_wp = sdkp->write_prot; |
1da177e4 LT |
2410 | |
2411 | set_disk_ro(sdkp->disk, 0); | |
ea73a9f2 | 2412 | if (sdp->skip_ms_page_3f) { |
b2bff6ce | 2413 | sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n"); |
1da177e4 LT |
2414 | return; |
2415 | } | |
2416 | ||
ea73a9f2 JB |
2417 | if (sdp->use_192_bytes_for_3f) { |
2418 | res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL); | |
1da177e4 LT |
2419 | } else { |
2420 | /* | |
2421 | * First attempt: ask for all pages (0x3F), but only 4 bytes. | |
2422 | * We have to start carefully: some devices hang if we ask | |
2423 | * for more than is available. | |
2424 | */ | |
ea73a9f2 | 2425 | res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL); |
1da177e4 LT |
2426 | |
2427 | /* | |
2428 | * Second attempt: ask for page 0 When only page 0 is | |
2429 | * implemented, a request for page 3F may return Sense Key | |
2430 | * 5: Illegal Request, Sense Code 24: Invalid field in | |
2431 | * CDB. | |
2432 | */ | |
2433 | if (!scsi_status_is_good(res)) | |
ea73a9f2 | 2434 | res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL); |
1da177e4 LT |
2435 | |
2436 | /* | |
2437 | * Third attempt: ask 255 bytes, as we did earlier. | |
2438 | */ | |
2439 | if (!scsi_status_is_good(res)) | |
ea73a9f2 JB |
2440 | res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255, |
2441 | &data, NULL); | |
1da177e4 LT |
2442 | } |
2443 | ||
2444 | if (!scsi_status_is_good(res)) { | |
b2bff6ce | 2445 | sd_first_printk(KERN_WARNING, sdkp, |
e73aec82 | 2446 | "Test WP failed, assume Write Enabled\n"); |
1da177e4 LT |
2447 | } else { |
2448 | sdkp->write_prot = ((data.device_specific & 0x80) != 0); | |
2449 | set_disk_ro(sdkp->disk, sdkp->write_prot); | |
70a9b873 MP |
2450 | if (sdkp->first_scan || old_wp != sdkp->write_prot) { |
2451 | sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", | |
2452 | sdkp->write_prot ? "on" : "off"); | |
df441cc0 | 2453 | sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer); |
70a9b873 | 2454 | } |
1da177e4 LT |
2455 | } |
2456 | } | |
2457 | ||
2458 | /* | |
2459 | * sd_read_cache_type - called only from sd_revalidate_disk() | |
48970800 | 2460 | * called with buffer of length SD_BUF_SIZE |
1da177e4 LT |
2461 | */ |
2462 | static void | |
e73aec82 | 2463 | sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) |
631e8a13 | 2464 | { |
1da177e4 | 2465 | int len = 0, res; |
ea73a9f2 | 2466 | struct scsi_device *sdp = sdkp->device; |
1da177e4 | 2467 | |
631e8a13 AV |
2468 | int dbd; |
2469 | int modepage; | |
0bcaa111 | 2470 | int first_len; |
1da177e4 LT |
2471 | struct scsi_mode_data data; |
2472 | struct scsi_sense_hdr sshdr; | |
70a9b873 MP |
2473 | int old_wce = sdkp->WCE; |
2474 | int old_rcd = sdkp->RCD; | |
2475 | int old_dpofua = sdkp->DPOFUA; | |
1da177e4 | 2476 | |
39c60a09 JB |
2477 | |
2478 | if (sdkp->cache_override) | |
2479 | return; | |
2480 | ||
0bcaa111 LT |
2481 | first_len = 4; |
2482 | if (sdp->skip_ms_page_8) { | |
2483 | if (sdp->type == TYPE_RBC) | |
2484 | goto defaults; | |
2485 | else { | |
2486 | if (sdp->skip_ms_page_3f) | |
2487 | goto defaults; | |
2488 | modepage = 0x3F; | |
2489 | if (sdp->use_192_bytes_for_3f) | |
2490 | first_len = 192; | |
2491 | dbd = 0; | |
2492 | } | |
2493 | } else if (sdp->type == TYPE_RBC) { | |
631e8a13 AV |
2494 | modepage = 6; |
2495 | dbd = 8; | |
2496 | } else { | |
2497 | modepage = 8; | |
2498 | dbd = 0; | |
2499 | } | |
2500 | ||
1da177e4 | 2501 | /* cautiously ask */ |
0bcaa111 LT |
2502 | res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len, |
2503 | &data, &sshdr); | |
1da177e4 LT |
2504 | |
2505 | if (!scsi_status_is_good(res)) | |
2506 | goto bad_sense; | |
2507 | ||
6d73c851 AV |
2508 | if (!data.header_length) { |
2509 | modepage = 6; | |
0bcaa111 | 2510 | first_len = 0; |
b2bff6ce MP |
2511 | sd_first_printk(KERN_ERR, sdkp, |
2512 | "Missing header in MODE_SENSE response\n"); | |
6d73c851 AV |
2513 | } |
2514 | ||
1da177e4 LT |
2515 | /* that went OK, now ask for the proper length */ |
2516 | len = data.length; | |
2517 | ||
2518 | /* | |
2519 | * We're only interested in the first three bytes, actually. | |
2520 | * But the data cache page is defined for the first 20. | |
2521 | */ | |
2522 | if (len < 3) | |
2523 | goto bad_sense; | |
0bcaa111 | 2524 | else if (len > SD_BUF_SIZE) { |
b2bff6ce | 2525 | sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter " |
0bcaa111 LT |
2526 | "data from %d to %d bytes\n", len, SD_BUF_SIZE); |
2527 | len = SD_BUF_SIZE; | |
2528 | } | |
2529 | if (modepage == 0x3F && sdp->use_192_bytes_for_3f) | |
2530 | len = 192; | |
1da177e4 LT |
2531 | |
2532 | /* Get the data */ | |
0bcaa111 LT |
2533 | if (len > first_len) |
2534 | res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, | |
2535 | &data, &sshdr); | |
1da177e4 LT |
2536 | |
2537 | if (scsi_status_is_good(res)) { | |
631e8a13 | 2538 | int offset = data.header_length + data.block_descriptor_length; |
1da177e4 | 2539 | |
0bcaa111 LT |
2540 | while (offset < len) { |
2541 | u8 page_code = buffer[offset] & 0x3F; | |
2542 | u8 spf = buffer[offset] & 0x40; | |
2543 | ||
2544 | if (page_code == 8 || page_code == 6) { | |
2545 | /* We're interested only in the first 3 bytes. | |
2546 | */ | |
2547 | if (len - offset <= 2) { | |
b2bff6ce MP |
2548 | sd_first_printk(KERN_ERR, sdkp, |
2549 | "Incomplete mode parameter " | |
2550 | "data\n"); | |
0bcaa111 LT |
2551 | goto defaults; |
2552 | } else { | |
2553 | modepage = page_code; | |
2554 | goto Page_found; | |
2555 | } | |
2556 | } else { | |
2557 | /* Go to the next page */ | |
2558 | if (spf && len - offset > 3) | |
2559 | offset += 4 + (buffer[offset+2] << 8) + | |
2560 | buffer[offset+3]; | |
2561 | else if (!spf && len - offset > 1) | |
2562 | offset += 2 + buffer[offset+1]; | |
2563 | else { | |
b2bff6ce MP |
2564 | sd_first_printk(KERN_ERR, sdkp, |
2565 | "Incomplete mode " | |
2566 | "parameter data\n"); | |
0bcaa111 LT |
2567 | goto defaults; |
2568 | } | |
2569 | } | |
48970800 AV |
2570 | } |
2571 | ||
b2bff6ce | 2572 | sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n"); |
984f1733 AS |
2573 | goto defaults; |
2574 | ||
0bcaa111 | 2575 | Page_found: |
631e8a13 AV |
2576 | if (modepage == 8) { |
2577 | sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); | |
2578 | sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); | |
2579 | } else { | |
2580 | sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0); | |
2581 | sdkp->RCD = 0; | |
2582 | } | |
1da177e4 | 2583 | |
007365ad | 2584 | sdkp->DPOFUA = (data.device_specific & 0x10) != 0; |
b14bf2d0 AS |
2585 | if (sdp->broken_fua) { |
2586 | sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n"); | |
2587 | sdkp->DPOFUA = 0; | |
26f28197 DLM |
2588 | } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw && |
2589 | !sdkp->device->use_16_for_rw) { | |
b2bff6ce | 2590 | sd_first_printk(KERN_NOTICE, sdkp, |
e73aec82 | 2591 | "Uses READ/WRITE(6), disabling FUA\n"); |
007365ad TH |
2592 | sdkp->DPOFUA = 0; |
2593 | } | |
2594 | ||
2eefd57b SRT |
2595 | /* No cache flush allowed for write protected devices */ |
2596 | if (sdkp->WCE && sdkp->write_prot) | |
2597 | sdkp->WCE = 0; | |
2598 | ||
70a9b873 MP |
2599 | if (sdkp->first_scan || old_wce != sdkp->WCE || |
2600 | old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA) | |
2601 | sd_printk(KERN_NOTICE, sdkp, | |
2602 | "Write cache: %s, read cache: %s, %s\n", | |
2603 | sdkp->WCE ? "enabled" : "disabled", | |
2604 | sdkp->RCD ? "disabled" : "enabled", | |
2605 | sdkp->DPOFUA ? "supports DPO and FUA" | |
2606 | : "doesn't support DPO or FUA"); | |
1da177e4 LT |
2607 | |
2608 | return; | |
2609 | } | |
2610 | ||
2611 | bad_sense: | |
ea73a9f2 | 2612 | if (scsi_sense_valid(&sshdr) && |
1da177e4 LT |
2613 | sshdr.sense_key == ILLEGAL_REQUEST && |
2614 | sshdr.asc == 0x24 && sshdr.ascq == 0x0) | |
e73aec82 | 2615 | /* Invalid field in CDB */ |
b2bff6ce | 2616 | sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n"); |
1da177e4 | 2617 | else |
b2bff6ce MP |
2618 | sd_first_printk(KERN_ERR, sdkp, |
2619 | "Asking for cache data failed\n"); | |
1da177e4 LT |
2620 | |
2621 | defaults: | |
b81478d8 | 2622 | if (sdp->wce_default_on) { |
b2bff6ce MP |
2623 | sd_first_printk(KERN_NOTICE, sdkp, |
2624 | "Assuming drive cache: write back\n"); | |
b81478d8 NJ |
2625 | sdkp->WCE = 1; |
2626 | } else { | |
b2bff6ce MP |
2627 | sd_first_printk(KERN_ERR, sdkp, |
2628 | "Assuming drive cache: write through\n"); | |
b81478d8 NJ |
2629 | sdkp->WCE = 0; |
2630 | } | |
1da177e4 | 2631 | sdkp->RCD = 0; |
48970800 | 2632 | sdkp->DPOFUA = 0; |
1da177e4 LT |
2633 | } |
2634 | ||
e0597d70 MP |
2635 | /* |
2636 | * The ATO bit indicates whether the DIF application tag is available | |
2637 | * for use by the operating system. | |
2638 | */ | |
439d77f7 | 2639 | static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) |
e0597d70 MP |
2640 | { |
2641 | int res, offset; | |
2642 | struct scsi_device *sdp = sdkp->device; | |
2643 | struct scsi_mode_data data; | |
2644 | struct scsi_sense_hdr sshdr; | |
2645 | ||
89d94756 | 2646 | if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
e0597d70 MP |
2647 | return; |
2648 | ||
2649 | if (sdkp->protection_type == 0) | |
2650 | return; | |
2651 | ||
2652 | res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT, | |
2653 | SD_MAX_RETRIES, &data, &sshdr); | |
2654 | ||
2655 | if (!scsi_status_is_good(res) || !data.header_length || | |
2656 | data.length < 6) { | |
b2bff6ce | 2657 | sd_first_printk(KERN_WARNING, sdkp, |
e0597d70 MP |
2658 | "getting Control mode page failed, assume no ATO\n"); |
2659 | ||
2660 | if (scsi_sense_valid(&sshdr)) | |
2661 | sd_print_sense_hdr(sdkp, &sshdr); | |
2662 | ||
2663 | return; | |
2664 | } | |
2665 | ||
2666 | offset = data.header_length + data.block_descriptor_length; | |
2667 | ||
2668 | if ((buffer[offset] & 0x3f) != 0x0a) { | |
b2bff6ce | 2669 | sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n"); |
e0597d70 MP |
2670 | return; |
2671 | } | |
2672 | ||
2673 | if ((buffer[offset + 5] & 0x80) == 0) | |
2674 | return; | |
2675 | ||
2676 | sdkp->ATO = 1; | |
2677 | ||
2678 | return; | |
2679 | } | |
2680 | ||
d11b6916 MP |
2681 | /** |
2682 | * sd_read_block_limits - Query disk device for preferred I/O sizes. | |
2683 | * @disk: disk to query | |
2684 | */ | |
2685 | static void sd_read_block_limits(struct scsi_disk *sdkp) | |
2686 | { | |
2687 | unsigned int sector_sz = sdkp->device->sector_size; | |
bb2d3de1 | 2688 | const int vpd_len = 64; |
e3deec09 | 2689 | unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL); |
d11b6916 | 2690 | |
e3deec09 JB |
2691 | if (!buffer || |
2692 | /* Block Limits VPD */ | |
2693 | scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len)) | |
2694 | goto out; | |
d11b6916 MP |
2695 | |
2696 | blk_queue_io_min(sdkp->disk->queue, | |
2697 | get_unaligned_be16(&buffer[6]) * sector_sz); | |
ca369d51 MP |
2698 | |
2699 | sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]); | |
2700 | sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]); | |
d11b6916 | 2701 | |
c98a0eb0 MP |
2702 | if (buffer[3] == 0x3c) { |
2703 | unsigned int lba_count, desc_count; | |
e339c1a7 | 2704 | |
5db44863 | 2705 | sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]); |
e339c1a7 | 2706 | |
c98a0eb0 | 2707 | if (!sdkp->lbpme) |
045d3fe7 | 2708 | goto out; |
045d3fe7 | 2709 | |
c98a0eb0 MP |
2710 | lba_count = get_unaligned_be32(&buffer[20]); |
2711 | desc_count = get_unaligned_be32(&buffer[24]); | |
045d3fe7 | 2712 | |
c98a0eb0 MP |
2713 | if (lba_count && desc_count) |
2714 | sdkp->max_unmap_blocks = lba_count; | |
e339c1a7 | 2715 | |
c98a0eb0 | 2716 | sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]); |
e339c1a7 MP |
2717 | |
2718 | if (buffer[32] & 0x80) | |
c98a0eb0 | 2719 | sdkp->unmap_alignment = |
e339c1a7 | 2720 | get_unaligned_be32(&buffer[32]) & ~(1 << 31); |
c98a0eb0 MP |
2721 | |
2722 | if (!sdkp->lbpvpd) { /* LBP VPD page not provided */ | |
2723 | ||
2724 | if (sdkp->max_unmap_blocks) | |
2725 | sd_config_discard(sdkp, SD_LBP_UNMAP); | |
2726 | else | |
2727 | sd_config_discard(sdkp, SD_LBP_WS16); | |
2728 | ||
2729 | } else { /* LBP VPD page tells us what to use */ | |
e461338b MP |
2730 | if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz) |
2731 | sd_config_discard(sdkp, SD_LBP_UNMAP); | |
2732 | else if (sdkp->lbpws) | |
c98a0eb0 MP |
2733 | sd_config_discard(sdkp, SD_LBP_WS16); |
2734 | else if (sdkp->lbpws10) | |
2735 | sd_config_discard(sdkp, SD_LBP_WS10); | |
7985090a MP |
2736 | else if (sdkp->lbpu && sdkp->max_unmap_blocks) |
2737 | sd_config_discard(sdkp, SD_LBP_UNMAP); | |
c98a0eb0 MP |
2738 | else |
2739 | sd_config_discard(sdkp, SD_LBP_DISABLE); | |
2740 | } | |
e339c1a7 MP |
2741 | } |
2742 | ||
e3deec09 | 2743 | out: |
d11b6916 MP |
2744 | kfree(buffer); |
2745 | } | |
2746 | ||
3821d768 MP |
2747 | /** |
2748 | * sd_read_block_characteristics - Query block dev. characteristics | |
2749 | * @disk: disk to query | |
2750 | */ | |
2751 | static void sd_read_block_characteristics(struct scsi_disk *sdkp) | |
2752 | { | |
89d94756 | 2753 | struct request_queue *q = sdkp->disk->queue; |
e3deec09 | 2754 | unsigned char *buffer; |
3821d768 | 2755 | u16 rot; |
bb2d3de1 | 2756 | const int vpd_len = 64; |
3821d768 | 2757 | |
e3deec09 | 2758 | buffer = kmalloc(vpd_len, GFP_KERNEL); |
3821d768 | 2759 | |
e3deec09 JB |
2760 | if (!buffer || |
2761 | /* Block Device Characteristics VPD */ | |
2762 | scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len)) | |
2763 | goto out; | |
3821d768 MP |
2764 | |
2765 | rot = get_unaligned_be16(&buffer[4]); | |
2766 | ||
b277da0a | 2767 | if (rot == 1) { |
89d94756 HR |
2768 | queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); |
2769 | queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); | |
b277da0a | 2770 | } |
3821d768 | 2771 | |
68af412c DLM |
2772 | if (sdkp->device->type == TYPE_ZBC) { |
2773 | /* Host-managed */ | |
89d94756 | 2774 | q->limits.zoned = BLK_ZONED_HM; |
68af412c DLM |
2775 | } else { |
2776 | sdkp->zoned = (buffer[8] >> 4) & 3; | |
2777 | if (sdkp->zoned == 1) | |
2778 | /* Host-aware */ | |
2779 | q->limits.zoned = BLK_ZONED_HA; | |
2780 | else | |
2781 | /* | |
2782 | * Treat drive-managed devices as | |
2783 | * regular block devices. | |
2784 | */ | |
2785 | q->limits.zoned = BLK_ZONED_NONE; | |
2786 | } | |
89d94756 HR |
2787 | if (blk_queue_is_zoned(q) && sdkp->first_scan) |
2788 | sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n", | |
2789 | q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware"); | |
2790 | ||
e3deec09 | 2791 | out: |
3821d768 MP |
2792 | kfree(buffer); |
2793 | } | |
2794 | ||
045d3fe7 | 2795 | /** |
c98a0eb0 | 2796 | * sd_read_block_provisioning - Query provisioning VPD page |
045d3fe7 MP |
2797 | * @disk: disk to query |
2798 | */ | |
c98a0eb0 | 2799 | static void sd_read_block_provisioning(struct scsi_disk *sdkp) |
045d3fe7 MP |
2800 | { |
2801 | unsigned char *buffer; | |
2802 | const int vpd_len = 8; | |
2803 | ||
c98a0eb0 | 2804 | if (sdkp->lbpme == 0) |
045d3fe7 MP |
2805 | return; |
2806 | ||
2807 | buffer = kmalloc(vpd_len, GFP_KERNEL); | |
2808 | ||
2809 | if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len)) | |
2810 | goto out; | |
2811 | ||
c98a0eb0 MP |
2812 | sdkp->lbpvpd = 1; |
2813 | sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */ | |
2814 | sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */ | |
2815 | sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */ | |
045d3fe7 MP |
2816 | |
2817 | out: | |
2818 | kfree(buffer); | |
2819 | } | |
2820 | ||
5db44863 MP |
2821 | static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) |
2822 | { | |
66c28f97 MP |
2823 | struct scsi_device *sdev = sdkp->device; |
2824 | ||
54b2b50c MP |
2825 | if (sdev->host->no_write_same) { |
2826 | sdev->no_write_same = 1; | |
2827 | ||
2828 | return; | |
2829 | } | |
2830 | ||
66c28f97 | 2831 | if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { |
af73623f BS |
2832 | /* too large values might cause issues with arcmsr */ |
2833 | int vpd_buf_len = 64; | |
2834 | ||
66c28f97 MP |
2835 | sdev->no_report_opcodes = 1; |
2836 | ||
2837 | /* Disable WRITE SAME if REPORT SUPPORTED OPERATION | |
2838 | * CODES is unsupported and the device has an ATA | |
2839 | * Information VPD page (SAT). | |
2840 | */ | |
af73623f | 2841 | if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len)) |
66c28f97 MP |
2842 | sdev->no_write_same = 1; |
2843 | } | |
2844 | ||
2845 | if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1) | |
5db44863 | 2846 | sdkp->ws16 = 1; |
66c28f97 MP |
2847 | |
2848 | if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1) | |
2849 | sdkp->ws10 = 1; | |
5db44863 MP |
2850 | } |
2851 | ||
1da177e4 LT |
2852 | /** |
2853 | * sd_revalidate_disk - called the first time a new disk is seen, | |
2854 | * performs disk spin up, read_capacity, etc. | |
2855 | * @disk: struct gendisk we care about | |
2856 | **/ | |
2857 | static int sd_revalidate_disk(struct gendisk *disk) | |
2858 | { | |
2859 | struct scsi_disk *sdkp = scsi_disk(disk); | |
2860 | struct scsi_device *sdp = sdkp->device; | |
ca369d51 | 2861 | struct request_queue *q = sdkp->disk->queue; |
89d94756 | 2862 | sector_t old_capacity = sdkp->capacity; |
1da177e4 | 2863 | unsigned char *buffer; |
ca369d51 | 2864 | unsigned int dev_max, rw_max; |
1da177e4 | 2865 | |
fa0d34be MP |
2866 | SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, |
2867 | "sd_revalidate_disk\n")); | |
1da177e4 LT |
2868 | |
2869 | /* | |
2870 | * If the device is offline, don't try and read capacity or any | |
2871 | * of the other niceties. | |
2872 | */ | |
2873 | if (!scsi_device_online(sdp)) | |
2874 | goto out; | |
2875 | ||
a6123f14 | 2876 | buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL); |
1da177e4 | 2877 | if (!buffer) { |
e73aec82 MP |
2878 | sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory " |
2879 | "allocation failure.\n"); | |
ea73a9f2 | 2880 | goto out; |
1da177e4 LT |
2881 | } |
2882 | ||
e73aec82 | 2883 | sd_spinup_disk(sdkp); |
1da177e4 LT |
2884 | |
2885 | /* | |
2886 | * Without media there is no reason to ask; moreover, some devices | |
2887 | * react badly if we do. | |
2888 | */ | |
2889 | if (sdkp->media_present) { | |
e73aec82 | 2890 | sd_read_capacity(sdkp, buffer); |
ffd4bc2a | 2891 | |
5ddfe085 | 2892 | if (scsi_device_supports_vpd(sdp)) { |
c98a0eb0 | 2893 | sd_read_block_provisioning(sdkp); |
ffd4bc2a MP |
2894 | sd_read_block_limits(sdkp); |
2895 | sd_read_block_characteristics(sdkp); | |
89d94756 | 2896 | sd_zbc_read_zones(sdkp, buffer); |
ffd4bc2a MP |
2897 | } |
2898 | ||
89d94756 HR |
2899 | sd_print_capacity(sdkp, old_capacity); |
2900 | ||
e73aec82 MP |
2901 | sd_read_write_protect_flag(sdkp, buffer); |
2902 | sd_read_cache_type(sdkp, buffer); | |
e0597d70 | 2903 | sd_read_app_tag_own(sdkp, buffer); |
5db44863 | 2904 | sd_read_write_same(sdkp, buffer); |
1da177e4 | 2905 | } |
461d4e90 | 2906 | |
70a9b873 MP |
2907 | sdkp->first_scan = 0; |
2908 | ||
461d4e90 TH |
2909 | /* |
2910 | * We now have all cache related info, determine how we deal | |
4913efe4 | 2911 | * with flush requests. |
461d4e90 | 2912 | */ |
cb2fb68d | 2913 | sd_set_flush_flag(sdkp); |
461d4e90 | 2914 | |
ca369d51 MP |
2915 | /* Initial block count limit based on CDB TRANSFER LENGTH field size. */ |
2916 | dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS; | |
2917 | ||
2918 | /* Some devices report a maximum block count for READ/WRITE requests. */ | |
2919 | dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks); | |
2920 | q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max); | |
2921 | ||
2922 | /* | |
2923 | * Use the device's preferred I/O size for reads and writes | |
9c1d9c20 MP |
2924 | * unless the reported value is unreasonably small, large, or |
2925 | * garbage. | |
ca369d51 | 2926 | */ |
9c1d9c20 MP |
2927 | if (sdkp->opt_xfer_blocks && |
2928 | sdkp->opt_xfer_blocks <= dev_max && | |
2929 | sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS && | |
6b7e9cde MP |
2930 | logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) { |
2931 | q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks); | |
2932 | rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks); | |
2933 | } else | |
ca369d51 | 2934 | rw_max = BLK_DEF_MAX_SECTORS; |
3a9794d3 | 2935 | |
ca369d51 MP |
2936 | /* Combine with controller limits */ |
2937 | q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q)); | |
4f258a46 | 2938 | |
f08bb1e0 | 2939 | set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity)); |
5db44863 | 2940 | sd_config_write_same(sdkp); |
1da177e4 LT |
2941 | kfree(buffer); |
2942 | ||
1da177e4 LT |
2943 | out: |
2944 | return 0; | |
2945 | } | |
2946 | ||
72ec24bd TH |
2947 | /** |
2948 | * sd_unlock_native_capacity - unlock native capacity | |
2949 | * @disk: struct gendisk to set capacity for | |
2950 | * | |
2951 | * Block layer calls this function if it detects that partitions | |
2952 | * on @disk reach beyond the end of the device. If the SCSI host | |
2953 | * implements ->unlock_native_capacity() method, it's invoked to | |
2954 | * give it a chance to adjust the device capacity. | |
2955 | * | |
2956 | * CONTEXT: | |
2957 | * Defined by block layer. Might sleep. | |
2958 | */ | |
2959 | static void sd_unlock_native_capacity(struct gendisk *disk) | |
2960 | { | |
2961 | struct scsi_device *sdev = scsi_disk(disk)->device; | |
2962 | ||
2963 | if (sdev->host->hostt->unlock_native_capacity) | |
2964 | sdev->host->hostt->unlock_native_capacity(sdev); | |
2965 | } | |
2966 | ||
3e1a7ff8 TH |
2967 | /** |
2968 | * sd_format_disk_name - format disk name | |
2969 | * @prefix: name prefix - ie. "sd" for SCSI disks | |
2970 | * @index: index of the disk to format name for | |
2971 | * @buf: output buffer | |
2972 | * @buflen: length of the output buffer | |
2973 | * | |
2974 | * SCSI disk names starts at sda. The 26th device is sdz and the | |
2975 | * 27th is sdaa. The last one for two lettered suffix is sdzz | |
2976 | * which is followed by sdaaa. | |
2977 | * | |
2978 | * This is basically 26 base counting with one extra 'nil' entry | |
3ad2f3fb | 2979 | * at the beginning from the second digit on and can be |
3e1a7ff8 TH |
2980 | * determined using similar method as 26 base conversion with the |
2981 | * index shifted -1 after each digit is computed. | |
2982 | * | |
2983 | * CONTEXT: | |
2984 | * Don't care. | |
2985 | * | |
2986 | * RETURNS: | |
2987 | * 0 on success, -errno on failure. | |
2988 | */ | |
2989 | static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) | |
2990 | { | |
2991 | const int base = 'z' - 'a' + 1; | |
2992 | char *begin = buf + strlen(prefix); | |
2993 | char *end = buf + buflen; | |
2994 | char *p; | |
2995 | int unit; | |
2996 | ||
2997 | p = end - 1; | |
2998 | *p = '\0'; | |
2999 | unit = base; | |
3000 | do { | |
3001 | if (p == begin) | |
3002 | return -EINVAL; | |
3003 | *--p = 'a' + (index % unit); | |
3004 | index = (index / unit) - 1; | |
3005 | } while (index >= 0); | |
3006 | ||
3007 | memmove(begin, p, end - p); | |
3008 | memcpy(buf, prefix, strlen(prefix)); | |
3009 | ||
3010 | return 0; | |
3011 | } | |
3012 | ||
4ace92fc AV |
3013 | /* |
3014 | * The asynchronous part of sd_probe | |
3015 | */ | |
3016 | static void sd_probe_async(void *data, async_cookie_t cookie) | |
3017 | { | |
3018 | struct scsi_disk *sdkp = data; | |
3019 | struct scsi_device *sdp; | |
3020 | struct gendisk *gd; | |
3021 | u32 index; | |
3022 | struct device *dev; | |
3023 | ||
3024 | sdp = sdkp->device; | |
3025 | gd = sdkp->disk; | |
3026 | index = sdkp->index; | |
3027 | dev = &sdp->sdev_gendev; | |
3028 | ||
1a03ae0f MR |
3029 | gd->major = sd_major((index & 0xf0) >> 4); |
3030 | gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); | |
3031 | gd->minors = SD_MINORS; | |
3032 | ||
4ace92fc AV |
3033 | gd->fops = &sd_fops; |
3034 | gd->private_data = &sdkp->driver; | |
3035 | gd->queue = sdkp->device->request_queue; | |
3036 | ||
70a9b873 MP |
3037 | /* defaults, until the device tells us otherwise */ |
3038 | sdp->sector_size = 512; | |
3039 | sdkp->capacity = 0; | |
3040 | sdkp->media_present = 1; | |
3041 | sdkp->write_prot = 0; | |
39c60a09 | 3042 | sdkp->cache_override = 0; |
70a9b873 MP |
3043 | sdkp->WCE = 0; |
3044 | sdkp->RCD = 0; | |
3045 | sdkp->ATO = 0; | |
3046 | sdkp->first_scan = 1; | |
18a4d0a2 | 3047 | sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS; |
70a9b873 | 3048 | |
4ace92fc AV |
3049 | sd_revalidate_disk(gd); |
3050 | ||
97fedbbe | 3051 | gd->flags = GENHD_FL_EXT_DEVT; |
2bae0093 | 3052 | if (sdp->removable) { |
4ace92fc | 3053 | gd->flags |= GENHD_FL_REMOVABLE; |
2bae0093 TH |
3054 | gd->events |= DISK_EVENT_MEDIA_CHANGE; |
3055 | } | |
4ace92fc | 3056 | |
10c580e4 | 3057 | blk_pm_runtime_init(sdp->request_queue, dev); |
0d52c756 | 3058 | device_add_disk(dev, gd); |
fe542396 MP |
3059 | if (sdkp->capacity) |
3060 | sd_dif_config_host(sdkp); | |
4ace92fc | 3061 | |
3821d768 MP |
3062 | sd_revalidate_disk(gd); |
3063 | ||
4ace92fc AV |
3064 | sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", |
3065 | sdp->removable ? "removable " : ""); | |
478a8a05 | 3066 | scsi_autopm_put_device(sdp); |
ea038f63 | 3067 | put_device(&sdkp->dev); |
4ace92fc AV |
3068 | } |
3069 | ||
1da177e4 LT |
3070 | /** |
3071 | * sd_probe - called during driver initialization and whenever a | |
3072 | * new scsi device is attached to the system. It is called once | |
3073 | * for each scsi device (not just disks) present. | |
3074 | * @dev: pointer to device object | |
3075 | * | |
3076 | * Returns 0 if successful (or not interested in this scsi device | |
3077 | * (e.g. scanner)); 1 when there is an error. | |
3078 | * | |
3079 | * Note: this function is invoked from the scsi mid-level. | |
3080 | * This function sets up the mapping between a given | |
3081 | * <host,channel,id,lun> (found in sdp) and new device name | |
3082 | * (e.g. /dev/sda). More precisely it is the block device major | |
3083 | * and minor number that is chosen here. | |
3084 | * | |
2db93ce8 PU |
3085 | * Assume sd_probe is not re-entrant (for time being) |
3086 | * Also think about sd_probe() and sd_remove() running coincidentally. | |
1da177e4 LT |
3087 | **/ |
3088 | static int sd_probe(struct device *dev) | |
3089 | { | |
3090 | struct scsi_device *sdp = to_scsi_device(dev); | |
3091 | struct scsi_disk *sdkp; | |
3092 | struct gendisk *gd; | |
439d77f7 | 3093 | int index; |
1da177e4 LT |
3094 | int error; |
3095 | ||
6fe8c1db | 3096 | scsi_autopm_get_device(sdp); |
1da177e4 | 3097 | error = -ENODEV; |
89d94756 HR |
3098 | if (sdp->type != TYPE_DISK && |
3099 | sdp->type != TYPE_ZBC && | |
3100 | sdp->type != TYPE_MOD && | |
3101 | sdp->type != TYPE_RBC) | |
1da177e4 LT |
3102 | goto out; |
3103 | ||
89d94756 HR |
3104 | #ifndef CONFIG_BLK_DEV_ZONED |
3105 | if (sdp->type == TYPE_ZBC) | |
3106 | goto out; | |
3107 | #endif | |
9ccfc756 | 3108 | SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp, |
2db93ce8 | 3109 | "sd_probe\n")); |
1da177e4 LT |
3110 | |
3111 | error = -ENOMEM; | |
24669f75 | 3112 | sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL); |
1da177e4 LT |
3113 | if (!sdkp) |
3114 | goto out; | |
3115 | ||
689d6fac | 3116 | gd = alloc_disk(SD_MINORS); |
1da177e4 LT |
3117 | if (!gd) |
3118 | goto out_free; | |
3119 | ||
f27bac27 TH |
3120 | do { |
3121 | if (!ida_pre_get(&sd_index_ida, GFP_KERNEL)) | |
3122 | goto out_put; | |
1da177e4 | 3123 | |
4034cc68 | 3124 | spin_lock(&sd_index_lock); |
f27bac27 | 3125 | error = ida_get_new(&sd_index_ida, &index); |
4034cc68 | 3126 | spin_unlock(&sd_index_lock); |
f27bac27 | 3127 | } while (error == -EAGAIN); |
1da177e4 | 3128 | |
21208ae5 DK |
3129 | if (error) { |
3130 | sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n"); | |
1da177e4 | 3131 | goto out_put; |
1a03ae0f MR |
3132 | } |
3133 | ||
3e1a7ff8 | 3134 | error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); |
21208ae5 DK |
3135 | if (error) { |
3136 | sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n"); | |
f27bac27 | 3137 | goto out_free_index; |
21208ae5 | 3138 | } |
f27bac27 | 3139 | |
1da177e4 LT |
3140 | sdkp->device = sdp; |
3141 | sdkp->driver = &sd_template; | |
3142 | sdkp->disk = gd; | |
3143 | sdkp->index = index; | |
409f3499 | 3144 | atomic_set(&sdkp->openers, 0); |
9e1a1537 | 3145 | atomic_set(&sdkp->device->ioerr_cnt, 0); |
1da177e4 | 3146 | |
601e7638 JB |
3147 | if (!sdp->request_queue->rq_timeout) { |
3148 | if (sdp->type != TYPE_MOD) | |
3149 | blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); | |
3150 | else | |
3151 | blk_queue_rq_timeout(sdp->request_queue, | |
3152 | SD_MOD_TIMEOUT); | |
3153 | } | |
3154 | ||
3155 | device_initialize(&sdkp->dev); | |
478a8a05 | 3156 | sdkp->dev.parent = dev; |
601e7638 | 3157 | sdkp->dev.class = &sd_disk_class; |
02aa2a37 | 3158 | dev_set_name(&sdkp->dev, "%s", dev_name(dev)); |
601e7638 | 3159 | |
dee0586e DC |
3160 | error = device_add(&sdkp->dev); |
3161 | if (error) | |
601e7638 JB |
3162 | goto out_free_index; |
3163 | ||
478a8a05 AS |
3164 | get_device(dev); |
3165 | dev_set_drvdata(dev, sdkp); | |
601e7638 | 3166 | |
ea038f63 | 3167 | get_device(&sdkp->dev); /* prevent release before async_schedule */ |
a7a20d10 | 3168 | async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain); |
1da177e4 LT |
3169 | |
3170 | return 0; | |
3171 | ||
f27bac27 | 3172 | out_free_index: |
4034cc68 | 3173 | spin_lock(&sd_index_lock); |
f27bac27 | 3174 | ida_remove(&sd_index_ida, index); |
4034cc68 | 3175 | spin_unlock(&sd_index_lock); |
6bdaa1f1 | 3176 | out_put: |
1da177e4 | 3177 | put_disk(gd); |
6bdaa1f1 | 3178 | out_free: |
1da177e4 | 3179 | kfree(sdkp); |
6bdaa1f1 | 3180 | out: |
6fe8c1db | 3181 | scsi_autopm_put_device(sdp); |
1da177e4 LT |
3182 | return error; |
3183 | } | |
3184 | ||
3185 | /** | |
3186 | * sd_remove - called whenever a scsi disk (previously recognized by | |
3187 | * sd_probe) is detached from the system. It is called (potentially | |
3188 | * multiple times) during sd module unload. | |
3189 | * @sdp: pointer to mid level scsi device object | |
3190 | * | |
3191 | * Note: this function is invoked from the scsi mid-level. | |
3192 | * This function potentially frees up a device name (e.g. /dev/sdc) | |
3193 | * that could be re-used by a subsequent sd_probe(). | |
3194 | * This function is not called when the built-in sd driver is "exit-ed". | |
3195 | **/ | |
3196 | static int sd_remove(struct device *dev) | |
3197 | { | |
601e7638 | 3198 | struct scsi_disk *sdkp; |
0761df9c | 3199 | dev_t devt; |
1da177e4 | 3200 | |
601e7638 | 3201 | sdkp = dev_get_drvdata(dev); |
0761df9c | 3202 | devt = disk_devt(sdkp->disk); |
478a8a05 AS |
3203 | scsi_autopm_get_device(sdkp->device); |
3204 | ||
3c31b52f | 3205 | async_synchronize_full_domain(&scsi_sd_pm_domain); |
a7a20d10 | 3206 | async_synchronize_full_domain(&scsi_sd_probe_domain); |
ee959b00 | 3207 | device_del(&sdkp->dev); |
1da177e4 LT |
3208 | del_gendisk(sdkp->disk); |
3209 | sd_shutdown(dev); | |
39b7f1e2 | 3210 | |
89d94756 HR |
3211 | sd_zbc_remove(sdkp); |
3212 | ||
0761df9c HR |
3213 | blk_register_region(devt, SD_MINORS, NULL, |
3214 | sd_default_probe, NULL, NULL); | |
3215 | ||
0b950672 | 3216 | mutex_lock(&sd_ref_mutex); |
39b7f1e2 | 3217 | dev_set_drvdata(dev, NULL); |
ee959b00 | 3218 | put_device(&sdkp->dev); |
0b950672 | 3219 | mutex_unlock(&sd_ref_mutex); |
1da177e4 LT |
3220 | |
3221 | return 0; | |
3222 | } | |
3223 | ||
3224 | /** | |
3225 | * scsi_disk_release - Called to free the scsi_disk structure | |
ee959b00 | 3226 | * @dev: pointer to embedded class device |
1da177e4 | 3227 | * |
0b950672 | 3228 | * sd_ref_mutex must be held entering this routine. Because it is |
1da177e4 LT |
3229 | * called on last put, you should always use the scsi_disk_get() |
3230 | * scsi_disk_put() helpers which manipulate the semaphore directly | |
ee959b00 | 3231 | * and never do a direct put_device. |
1da177e4 | 3232 | **/ |
ee959b00 | 3233 | static void scsi_disk_release(struct device *dev) |
1da177e4 | 3234 | { |
ee959b00 | 3235 | struct scsi_disk *sdkp = to_scsi_disk(dev); |
1da177e4 LT |
3236 | struct gendisk *disk = sdkp->disk; |
3237 | ||
4034cc68 | 3238 | spin_lock(&sd_index_lock); |
f27bac27 | 3239 | ida_remove(&sd_index_ida, sdkp->index); |
4034cc68 | 3240 | spin_unlock(&sd_index_lock); |
1da177e4 LT |
3241 | |
3242 | disk->private_data = NULL; | |
1da177e4 | 3243 | put_disk(disk); |
39b7f1e2 | 3244 | put_device(&sdkp->device->sdev_gendev); |
1da177e4 LT |
3245 | |
3246 | kfree(sdkp); | |
3247 | } | |
3248 | ||
cc5d2c8c | 3249 | static int sd_start_stop_device(struct scsi_disk *sdkp, int start) |
c3c94c5a TH |
3250 | { |
3251 | unsigned char cmd[6] = { START_STOP }; /* START_VALID */ | |
3252 | struct scsi_sense_hdr sshdr; | |
cc5d2c8c | 3253 | struct scsi_device *sdp = sdkp->device; |
c3c94c5a TH |
3254 | int res; |
3255 | ||
3256 | if (start) | |
3257 | cmd[4] |= 1; /* START */ | |
3258 | ||
d2886ea3 SR |
3259 | if (sdp->start_stop_pwr_cond) |
3260 | cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */ | |
3261 | ||
c3c94c5a TH |
3262 | if (!scsi_device_online(sdp)) |
3263 | return -ENODEV; | |
3264 | ||
9b21493c | 3265 | res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, |
e8064021 | 3266 | SD_TIMEOUT, SD_MAX_RETRIES, NULL, 0, RQF_PM); |
c3c94c5a | 3267 | if (res) { |
ef61329d | 3268 | sd_print_result(sdkp, "Start/Stop Unit failed", res); |
c3c94c5a | 3269 | if (driver_byte(res) & DRIVER_SENSE) |
cc5d2c8c | 3270 | sd_print_sense_hdr(sdkp, &sshdr); |
95897910 ON |
3271 | if (scsi_sense_valid(&sshdr) && |
3272 | /* 0x3a is medium not present */ | |
3273 | sshdr.asc == 0x3a) | |
3274 | res = 0; | |
c3c94c5a TH |
3275 | } |
3276 | ||
95897910 ON |
3277 | /* SCSI error codes must not go to the generic layer */ |
3278 | if (res) | |
3279 | return -EIO; | |
3280 | ||
3281 | return 0; | |
c3c94c5a TH |
3282 | } |
3283 | ||
1da177e4 LT |
3284 | /* |
3285 | * Send a SYNCHRONIZE CACHE instruction down to the device through | |
3286 | * the normal SCSI command structure. Wait for the command to | |
3287 | * complete. | |
3288 | */ | |
3289 | static void sd_shutdown(struct device *dev) | |
3290 | { | |
3d9a1f53 | 3291 | struct scsi_disk *sdkp = dev_get_drvdata(dev); |
1da177e4 LT |
3292 | |
3293 | if (!sdkp) | |
3294 | return; /* this can happen */ | |
3295 | ||
54f57588 | 3296 | if (pm_runtime_suspended(dev)) |
3d9a1f53 | 3297 | return; |
54f57588 | 3298 | |
95897910 | 3299 | if (sdkp->WCE && sdkp->media_present) { |
e73aec82 MP |
3300 | sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); |
3301 | sd_sync_cache(sdkp); | |
39b7f1e2 | 3302 | } |
c3c94c5a | 3303 | |
cc5d2c8c JB |
3304 | if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) { |
3305 | sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); | |
3306 | sd_start_stop_device(sdkp, 0); | |
c3c94c5a | 3307 | } |
39b7f1e2 | 3308 | } |
1da177e4 | 3309 | |
95897910 | 3310 | static int sd_suspend_common(struct device *dev, bool ignore_stop_errors) |
c3c94c5a | 3311 | { |
3d9a1f53 | 3312 | struct scsi_disk *sdkp = dev_get_drvdata(dev); |
09ff92fe | 3313 | int ret = 0; |
c3c94c5a | 3314 | |
13b43891 AS |
3315 | if (!sdkp) /* E.g.: runtime suspend following sd_remove() */ |
3316 | return 0; | |
c3c94c5a | 3317 | |
95897910 | 3318 | if (sdkp->WCE && sdkp->media_present) { |
cc5d2c8c | 3319 | sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); |
c3c94c5a | 3320 | ret = sd_sync_cache(sdkp); |
95897910 ON |
3321 | if (ret) { |
3322 | /* ignore OFFLINE device */ | |
3323 | if (ret == -ENODEV) | |
3324 | ret = 0; | |
09ff92fe | 3325 | goto done; |
95897910 | 3326 | } |
c3c94c5a TH |
3327 | } |
3328 | ||
691e3d31 | 3329 | if (sdkp->device->manage_start_stop) { |
cc5d2c8c | 3330 | sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); |
95897910 | 3331 | /* an error is not worth aborting a system sleep */ |
cc5d2c8c | 3332 | ret = sd_start_stop_device(sdkp, 0); |
95897910 ON |
3333 | if (ignore_stop_errors) |
3334 | ret = 0; | |
c3c94c5a TH |
3335 | } |
3336 | ||
09ff92fe | 3337 | done: |
09ff92fe | 3338 | return ret; |
c3c94c5a TH |
3339 | } |
3340 | ||
95897910 ON |
3341 | static int sd_suspend_system(struct device *dev) |
3342 | { | |
3343 | return sd_suspend_common(dev, true); | |
3344 | } | |
3345 | ||
3346 | static int sd_suspend_runtime(struct device *dev) | |
3347 | { | |
3348 | return sd_suspend_common(dev, false); | |
3349 | } | |
3350 | ||
c3c94c5a TH |
3351 | static int sd_resume(struct device *dev) |
3352 | { | |
3d9a1f53 | 3353 | struct scsi_disk *sdkp = dev_get_drvdata(dev); |
c3c94c5a | 3354 | |
13b43891 AS |
3355 | if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ |
3356 | return 0; | |
3357 | ||
cc5d2c8c | 3358 | if (!sdkp->device->manage_start_stop) |
3d9a1f53 | 3359 | return 0; |
c3c94c5a | 3360 | |
cc5d2c8c | 3361 | sd_printk(KERN_NOTICE, sdkp, "Starting disk\n"); |
3d9a1f53 | 3362 | return sd_start_stop_device(sdkp, 1); |
c3c94c5a TH |
3363 | } |
3364 | ||
1da177e4 LT |
3365 | /** |
3366 | * init_sd - entry point for this driver (both when built in or when | |
3367 | * a module). | |
3368 | * | |
3369 | * Note: this function registers this driver with the scsi mid-level. | |
3370 | **/ | |
3371 | static int __init init_sd(void) | |
3372 | { | |
5e4009ba | 3373 | int majors = 0, i, err; |
1da177e4 LT |
3374 | |
3375 | SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n")); | |
3376 | ||
0761df9c HR |
3377 | for (i = 0; i < SD_MAJORS; i++) { |
3378 | if (register_blkdev(sd_major(i), "sd") != 0) | |
3379 | continue; | |
3380 | majors++; | |
3381 | blk_register_region(sd_major(i), SD_MINORS, NULL, | |
3382 | sd_default_probe, NULL, NULL); | |
3383 | } | |
1da177e4 LT |
3384 | |
3385 | if (!majors) | |
3386 | return -ENODEV; | |
3387 | ||
5e4009ba JG |
3388 | err = class_register(&sd_disk_class); |
3389 | if (err) | |
3390 | goto err_out; | |
6bdaa1f1 | 3391 | |
4e7392ec MP |
3392 | sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE, |
3393 | 0, 0, NULL); | |
3394 | if (!sd_cdb_cache) { | |
3395 | printk(KERN_ERR "sd: can't init extended cdb cache\n"); | |
8d964478 | 3396 | err = -ENOMEM; |
4e7392ec MP |
3397 | goto err_out_class; |
3398 | } | |
3399 | ||
3400 | sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache); | |
3401 | if (!sd_cdb_pool) { | |
3402 | printk(KERN_ERR "sd: can't init extended cdb pool\n"); | |
8d964478 | 3403 | err = -ENOMEM; |
4e7392ec MP |
3404 | goto err_out_cache; |
3405 | } | |
3406 | ||
afd5e34b JD |
3407 | err = scsi_register_driver(&sd_template.gendrv); |
3408 | if (err) | |
3409 | goto err_out_driver; | |
3410 | ||
5e4009ba JG |
3411 | return 0; |
3412 | ||
afd5e34b JD |
3413 | err_out_driver: |
3414 | mempool_destroy(sd_cdb_pool); | |
3415 | ||
4e7392ec MP |
3416 | err_out_cache: |
3417 | kmem_cache_destroy(sd_cdb_cache); | |
3418 | ||
5e4009ba JG |
3419 | err_out_class: |
3420 | class_unregister(&sd_disk_class); | |
3421 | err_out: | |
3422 | for (i = 0; i < SD_MAJORS; i++) | |
3423 | unregister_blkdev(sd_major(i), "sd"); | |
3424 | return err; | |
1da177e4 LT |
3425 | } |
3426 | ||
3427 | /** | |
3428 | * exit_sd - exit point for this driver (when it is a module). | |
3429 | * | |
3430 | * Note: this function unregisters this driver from the scsi mid-level. | |
3431 | **/ | |
3432 | static void __exit exit_sd(void) | |
3433 | { | |
3434 | int i; | |
3435 | ||
3436 | SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); | |
3437 | ||
afd5e34b | 3438 | scsi_unregister_driver(&sd_template.gendrv); |
4e7392ec MP |
3439 | mempool_destroy(sd_cdb_pool); |
3440 | kmem_cache_destroy(sd_cdb_cache); | |
3441 | ||
5e4009ba JG |
3442 | class_unregister(&sd_disk_class); |
3443 | ||
0761df9c HR |
3444 | for (i = 0; i < SD_MAJORS; i++) { |
3445 | blk_unregister_region(sd_major(i), SD_MINORS); | |
1da177e4 | 3446 | unregister_blkdev(sd_major(i), "sd"); |
0761df9c | 3447 | } |
1da177e4 LT |
3448 | } |
3449 | ||
1da177e4 LT |
3450 | module_init(init_sd); |
3451 | module_exit(exit_sd); | |
e73aec82 MP |
3452 | |
3453 | static void sd_print_sense_hdr(struct scsi_disk *sdkp, | |
3454 | struct scsi_sense_hdr *sshdr) | |
3455 | { | |
21045519 HR |
3456 | scsi_print_sense_hdr(sdkp->device, |
3457 | sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr); | |
e73aec82 MP |
3458 | } |
3459 | ||
ef61329d HR |
3460 | static void sd_print_result(const struct scsi_disk *sdkp, const char *msg, |
3461 | int result) | |
e73aec82 | 3462 | { |
ef61329d HR |
3463 | const char *hb_string = scsi_hostbyte_string(result); |
3464 | const char *db_string = scsi_driverbyte_string(result); | |
3465 | ||
3466 | if (hb_string || db_string) | |
3467 | sd_printk(KERN_INFO, sdkp, | |
3468 | "%s: Result: hostbyte=%s driverbyte=%s\n", msg, | |
3469 | hb_string ? hb_string : "invalid", | |
3470 | db_string ? db_string : "invalid"); | |
3471 | else | |
3472 | sd_printk(KERN_INFO, sdkp, | |
3473 | "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n", | |
3474 | msg, host_byte(result), driver_byte(result)); | |
e73aec82 MP |
3475 | } |
3476 |