]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family | |
3 | * of PCI-SCSI IO processors. | |
4 | * | |
5 | * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> | |
6 | * | |
7 | * This driver is derived from the Linux sym53c8xx driver. | |
8 | * Copyright (C) 1998-2000 Gerard Roudier | |
9 | * | |
10 | * The sym53c8xx driver is derived from the ncr53c8xx driver that had been | |
11 | * a port of the FreeBSD ncr driver to Linux-1.2.13. | |
12 | * | |
13 | * The original ncr driver has been written for 386bsd and FreeBSD by | |
14 | * Wolfgang Stanglmeier <wolf@cologne.de> | |
15 | * Stefan Esser <se@mi.Uni-Koeln.de> | |
16 | * Copyright (C) 1994 Wolfgang Stanglmeier | |
17 | * | |
18 | * Other major contributions: | |
19 | * | |
20 | * NVRAM detection and reading. | |
21 | * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> | |
22 | * | |
23 | *----------------------------------------------------------------------------- | |
24 | * | |
25 | * This program is free software; you can redistribute it and/or modify | |
26 | * it under the terms of the GNU General Public License as published by | |
27 | * the Free Software Foundation; either version 2 of the License, or | |
28 | * (at your option) any later version. | |
29 | * | |
30 | * This program is distributed in the hope that it will be useful, | |
31 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
32 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
33 | * GNU General Public License for more details. | |
34 | * | |
35 | * You should have received a copy of the GNU General Public License | |
36 | * along with this program; if not, write to the Free Software | |
37 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
38 | */ | |
39 | ||
40 | #include "sym_glue.h" | |
41 | #include "sym_nvram.h" | |
42 | ||
43 | #ifdef SYM_CONF_DEBUG_NVRAM | |
44 | static u_char Tekram_boot_delay[7] = {3, 5, 10, 20, 30, 60, 120}; | |
45 | #endif | |
46 | ||
47 | /* | |
48 | * Get host setup from NVRAM. | |
49 | */ | |
50 | void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram) | |
51 | { | |
52 | /* | |
53 | * Get parity checking, host ID, verbose mode | |
54 | * and miscellaneous host flags from NVRAM. | |
55 | */ | |
56 | switch (nvram->type) { | |
57 | case SYM_SYMBIOS_NVRAM: | |
58 | if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE)) | |
59 | np->rv_scntl0 &= ~0x0a; | |
60 | np->myaddr = nvram->data.Symbios.host_id & 0x0f; | |
61 | if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS) | |
62 | np->verbose += 1; | |
63 | if (nvram->data.Symbios.flags1 & SYMBIOS_SCAN_HI_LO) | |
64 | shost->reverse_ordering = 1; | |
65 | if (nvram->data.Symbios.flags2 & SYMBIOS_AVOID_BUS_RESET) | |
66 | np->usrflags |= SYM_AVOID_BUS_RESET; | |
67 | break; | |
68 | case SYM_TEKRAM_NVRAM: | |
69 | np->myaddr = nvram->data.Tekram.host_id & 0x0f; | |
70 | break; | |
71 | #ifdef CONFIG_PARISC | |
72 | case SYM_PARISC_PDC: | |
73 | if (nvram->data.parisc.host_id != -1) | |
74 | np->myaddr = nvram->data.parisc.host_id; | |
75 | if (nvram->data.parisc.factor != -1) | |
76 | np->minsync = nvram->data.parisc.factor; | |
77 | if (nvram->data.parisc.width != -1) | |
78 | np->maxwide = nvram->data.parisc.width; | |
79 | switch (nvram->data.parisc.mode) { | |
80 | case 0: np->scsi_mode = SMODE_SE; break; | |
81 | case 1: np->scsi_mode = SMODE_HVD; break; | |
82 | case 2: np->scsi_mode = SMODE_LVD; break; | |
83 | default: break; | |
84 | } | |
85 | #endif | |
86 | default: | |
87 | break; | |
88 | } | |
89 | } | |
90 | ||
91 | /* | |
92 | * Get target set-up from Symbios format NVRAM. | |
93 | */ | |
94 | static void | |
b37df489 | 95 | sym_Symbios_setup_target(struct sym_tcb *tp, int target, Symbios_nvram *nvram) |
1da177e4 | 96 | { |
1da177e4 LT |
97 | Symbios_target *tn = &nvram->target[target]; |
98 | ||
b37df489 MW |
99 | if (!(tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)) |
100 | tp->usrtags = 0; | |
1da177e4 LT |
101 | if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE)) |
102 | tp->usrflags &= ~SYM_DISC_ENABLED; | |
103 | if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME)) | |
104 | tp->usrflags |= SYM_SCAN_BOOT_DISABLED; | |
105 | if (!(tn->flags & SYMBIOS_SCAN_LUNS)) | |
106 | tp->usrflags |= SYM_SCAN_LUNS_DISABLED; | |
b37df489 MW |
107 | tp->usr_period = (tn->sync_period + 3) / 4; |
108 | tp->usr_width = (tn->bus_width == 0x8) ? 0 : 1; | |
1da177e4 LT |
109 | } |
110 | ||
b37df489 MW |
111 | static const unsigned char Tekram_sync[16] = { |
112 | 25, 31, 37, 43, 50, 62, 75, 125, 12, 15, 18, 21, 6, 7, 9, 10 | |
113 | }; | |
114 | ||
1da177e4 LT |
115 | /* |
116 | * Get target set-up from Tekram format NVRAM. | |
117 | */ | |
118 | static void | |
b37df489 | 119 | sym_Tekram_setup_target(struct sym_tcb *tp, int target, Tekram_nvram *nvram) |
1da177e4 | 120 | { |
1da177e4 LT |
121 | struct Tekram_target *tn = &nvram->target[target]; |
122 | ||
123 | if (tn->flags & TEKRAM_TAGGED_COMMANDS) { | |
124 | tp->usrtags = 2 << nvram->max_tags_index; | |
125 | } | |
126 | ||
127 | if (tn->flags & TEKRAM_DISCONNECT_ENABLE) | |
128 | tp->usrflags |= SYM_DISC_ENABLED; | |
129 | ||
b37df489 MW |
130 | if (tn->flags & TEKRAM_SYNC_NEGO) |
131 | tp->usr_period = Tekram_sync[tn->sync_index & 0xf]; | |
132 | tp->usr_width = (tn->flags & TEKRAM_WIDE_NEGO) ? 1 : 0; | |
1da177e4 LT |
133 | } |
134 | ||
135 | /* | |
136 | * Get target setup from NVRAM. | |
137 | */ | |
b37df489 | 138 | void sym_nvram_setup_target(struct sym_tcb *tp, int target, struct sym_nvram *nvp) |
1da177e4 LT |
139 | { |
140 | switch (nvp->type) { | |
141 | case SYM_SYMBIOS_NVRAM: | |
b37df489 | 142 | sym_Symbios_setup_target(tp, target, &nvp->data.Symbios); |
1da177e4 LT |
143 | break; |
144 | case SYM_TEKRAM_NVRAM: | |
b37df489 | 145 | sym_Tekram_setup_target(tp, target, &nvp->data.Tekram); |
1da177e4 LT |
146 | break; |
147 | default: | |
148 | break; | |
149 | } | |
150 | } | |
151 | ||
152 | #ifdef SYM_CONF_DEBUG_NVRAM | |
153 | /* | |
154 | * Dump Symbios format NVRAM for debugging purpose. | |
155 | */ | |
156 | static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) | |
157 | { | |
158 | int i; | |
159 | ||
160 | /* display Symbios nvram host data */ | |
161 | printf("%s: HOST ID=%d%s%s%s%s%s%s\n", | |
162 | sym_name(np), nvram->host_id & 0x0f, | |
163 | (nvram->flags & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", | |
164 | (nvram->flags & SYMBIOS_PARITY_ENABLE) ? " PARITY" :"", | |
165 | (nvram->flags & SYMBIOS_VERBOSE_MSGS) ? " VERBOSE" :"", | |
166 | (nvram->flags & SYMBIOS_CHS_MAPPING) ? " CHS_ALT" :"", | |
167 | (nvram->flags2 & SYMBIOS_AVOID_BUS_RESET)?" NO_RESET" :"", | |
168 | (nvram->flags1 & SYMBIOS_SCAN_HI_LO) ? " HI_LO" :""); | |
169 | ||
170 | /* display Symbios nvram drive data */ | |
171 | for (i = 0 ; i < 15 ; i++) { | |
172 | struct Symbios_target *tn = &nvram->target[i]; | |
173 | printf("%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n", | |
174 | sym_name(np), i, | |
175 | (tn->flags & SYMBIOS_DISCONNECT_ENABLE) ? " DISC" : "", | |
176 | (tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME) ? " SCAN_BOOT" : "", | |
177 | (tn->flags & SYMBIOS_SCAN_LUNS) ? " SCAN_LUNS" : "", | |
178 | (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? " TCQ" : "", | |
179 | tn->bus_width, | |
180 | tn->sync_period / 4, | |
181 | tn->timeout); | |
182 | } | |
183 | } | |
184 | ||
185 | /* | |
186 | * Dump TEKRAM format NVRAM for debugging purpose. | |
187 | */ | |
188 | static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram) | |
189 | { | |
190 | int i, tags, boot_delay; | |
191 | char *rem; | |
192 | ||
193 | /* display Tekram nvram host data */ | |
194 | tags = 2 << nvram->max_tags_index; | |
195 | boot_delay = 0; | |
196 | if (nvram->boot_delay_index < 6) | |
197 | boot_delay = Tekram_boot_delay[nvram->boot_delay_index]; | |
198 | switch ((nvram->flags & TEKRAM_REMOVABLE_FLAGS) >> 6) { | |
199 | default: | |
200 | case 0: rem = ""; break; | |
201 | case 1: rem = " REMOVABLE=boot device"; break; | |
202 | case 2: rem = " REMOVABLE=all"; break; | |
203 | } | |
204 | ||
205 | printf("%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n", | |
206 | sym_name(np), nvram->host_id & 0x0f, | |
207 | (nvram->flags1 & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", | |
208 | (nvram->flags & TEKRAM_MORE_THAN_2_DRIVES) ? " >2DRIVES":"", | |
209 | (nvram->flags & TEKRAM_DRIVES_SUP_1GB) ? " >1GB" :"", | |
210 | (nvram->flags & TEKRAM_RESET_ON_POWER_ON) ? " RESET" :"", | |
211 | (nvram->flags & TEKRAM_ACTIVE_NEGATION) ? " ACT_NEG" :"", | |
212 | (nvram->flags & TEKRAM_IMMEDIATE_SEEK) ? " IMM_SEEK" :"", | |
213 | (nvram->flags & TEKRAM_SCAN_LUNS) ? " SCAN_LUNS" :"", | |
214 | (nvram->flags1 & TEKRAM_F2_F6_ENABLED) ? " F2_F6" :"", | |
215 | rem, boot_delay, tags); | |
216 | ||
217 | /* display Tekram nvram drive data */ | |
218 | for (i = 0; i <= 15; i++) { | |
219 | int sync, j; | |
220 | struct Tekram_target *tn = &nvram->target[i]; | |
221 | j = tn->sync_index & 0xf; | |
222 | sync = Tekram_sync[j]; | |
223 | printf("%s-%d:%s%s%s%s%s%s PERIOD=%d\n", | |
224 | sym_name(np), i, | |
225 | (tn->flags & TEKRAM_PARITY_CHECK) ? " PARITY" : "", | |
226 | (tn->flags & TEKRAM_SYNC_NEGO) ? " SYNC" : "", | |
227 | (tn->flags & TEKRAM_DISCONNECT_ENABLE) ? " DISC" : "", | |
228 | (tn->flags & TEKRAM_START_CMD) ? " START" : "", | |
229 | (tn->flags & TEKRAM_TAGGED_COMMANDS) ? " TCQ" : "", | |
230 | (tn->flags & TEKRAM_WIDE_NEGO) ? " WIDE" : "", | |
231 | sync); | |
232 | } | |
233 | } | |
234 | #else | |
235 | static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) { (void)np; (void)nvram; } | |
236 | static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram) { (void)np; (void)nvram; } | |
237 | #endif /* SYM_CONF_DEBUG_NVRAM */ | |
238 | ||
239 | ||
240 | /* | |
241 | * 24C16 EEPROM reading. | |
242 | * | |
243 | * GPOI0 - data in/data out | |
244 | * GPIO1 - clock | |
245 | * Symbios NVRAM wiring now also used by Tekram. | |
246 | */ | |
247 | ||
248 | #define SET_BIT 0 | |
249 | #define CLR_BIT 1 | |
250 | #define SET_CLK 2 | |
251 | #define CLR_CLK 3 | |
252 | ||
253 | /* | |
254 | * Set/clear data/clock bit in GPIO0 | |
255 | */ | |
256 | static void S24C16_set_bit(struct sym_device *np, u_char write_bit, u_char *gpreg, | |
257 | int bit_mode) | |
258 | { | |
259 | udelay(5); | |
260 | switch (bit_mode) { | |
261 | case SET_BIT: | |
262 | *gpreg |= write_bit; | |
263 | break; | |
264 | case CLR_BIT: | |
265 | *gpreg &= 0xfe; | |
266 | break; | |
267 | case SET_CLK: | |
268 | *gpreg |= 0x02; | |
269 | break; | |
270 | case CLR_CLK: | |
271 | *gpreg &= 0xfd; | |
272 | break; | |
273 | ||
274 | } | |
275 | OUTB(np, nc_gpreg, *gpreg); | |
53222b90 | 276 | INB(np, nc_mbox1); |
1da177e4 LT |
277 | udelay(5); |
278 | } | |
279 | ||
280 | /* | |
281 | * Send START condition to NVRAM to wake it up. | |
282 | */ | |
283 | static void S24C16_start(struct sym_device *np, u_char *gpreg) | |
284 | { | |
285 | S24C16_set_bit(np, 1, gpreg, SET_BIT); | |
286 | S24C16_set_bit(np, 0, gpreg, SET_CLK); | |
287 | S24C16_set_bit(np, 0, gpreg, CLR_BIT); | |
288 | S24C16_set_bit(np, 0, gpreg, CLR_CLK); | |
289 | } | |
290 | ||
291 | /* | |
292 | * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!! | |
293 | */ | |
294 | static void S24C16_stop(struct sym_device *np, u_char *gpreg) | |
295 | { | |
296 | S24C16_set_bit(np, 0, gpreg, SET_CLK); | |
297 | S24C16_set_bit(np, 1, gpreg, SET_BIT); | |
298 | } | |
299 | ||
300 | /* | |
301 | * Read or write a bit to the NVRAM, | |
302 | * read if GPIO0 input else write if GPIO0 output | |
303 | */ | |
304 | static void S24C16_do_bit(struct sym_device *np, u_char *read_bit, u_char write_bit, | |
305 | u_char *gpreg) | |
306 | { | |
307 | S24C16_set_bit(np, write_bit, gpreg, SET_BIT); | |
308 | S24C16_set_bit(np, 0, gpreg, SET_CLK); | |
309 | if (read_bit) | |
310 | *read_bit = INB(np, nc_gpreg); | |
311 | S24C16_set_bit(np, 0, gpreg, CLR_CLK); | |
312 | S24C16_set_bit(np, 0, gpreg, CLR_BIT); | |
313 | } | |
314 | ||
315 | /* | |
316 | * Output an ACK to the NVRAM after reading, | |
317 | * change GPIO0 to output and when done back to an input | |
318 | */ | |
319 | static void S24C16_write_ack(struct sym_device *np, u_char write_bit, u_char *gpreg, | |
320 | u_char *gpcntl) | |
321 | { | |
322 | OUTB(np, nc_gpcntl, *gpcntl & 0xfe); | |
323 | S24C16_do_bit(np, NULL, write_bit, gpreg); | |
324 | OUTB(np, nc_gpcntl, *gpcntl); | |
325 | } | |
326 | ||
327 | /* | |
328 | * Input an ACK from NVRAM after writing, | |
329 | * change GPIO0 to input and when done back to an output | |
330 | */ | |
331 | static void S24C16_read_ack(struct sym_device *np, u_char *read_bit, u_char *gpreg, | |
332 | u_char *gpcntl) | |
333 | { | |
334 | OUTB(np, nc_gpcntl, *gpcntl | 0x01); | |
335 | S24C16_do_bit(np, read_bit, 1, gpreg); | |
336 | OUTB(np, nc_gpcntl, *gpcntl); | |
337 | } | |
338 | ||
339 | /* | |
340 | * WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK, | |
341 | * GPIO0 must already be set as an output | |
342 | */ | |
343 | static void S24C16_write_byte(struct sym_device *np, u_char *ack_data, u_char write_data, | |
344 | u_char *gpreg, u_char *gpcntl) | |
345 | { | |
346 | int x; | |
347 | ||
348 | for (x = 0; x < 8; x++) | |
349 | S24C16_do_bit(np, NULL, (write_data >> (7 - x)) & 0x01, gpreg); | |
350 | ||
351 | S24C16_read_ack(np, ack_data, gpreg, gpcntl); | |
352 | } | |
353 | ||
354 | /* | |
355 | * READ a byte from the NVRAM and then send an ACK to say we have got it, | |
356 | * GPIO0 must already be set as an input | |
357 | */ | |
358 | static void S24C16_read_byte(struct sym_device *np, u_char *read_data, u_char ack_data, | |
359 | u_char *gpreg, u_char *gpcntl) | |
360 | { | |
361 | int x; | |
362 | u_char read_bit; | |
363 | ||
364 | *read_data = 0; | |
365 | for (x = 0; x < 8; x++) { | |
366 | S24C16_do_bit(np, &read_bit, 1, gpreg); | |
367 | *read_data |= ((read_bit & 0x01) << (7 - x)); | |
368 | } | |
369 | ||
370 | S24C16_write_ack(np, ack_data, gpreg, gpcntl); | |
371 | } | |
372 | ||
44456d37 | 373 | #ifdef SYM_CONF_NVRAM_WRITE_SUPPORT |
1da177e4 LT |
374 | /* |
375 | * Write 'len' bytes starting at 'offset'. | |
376 | */ | |
377 | static int sym_write_S24C16_nvram(struct sym_device *np, int offset, | |
378 | u_char *data, int len) | |
379 | { | |
380 | u_char gpcntl, gpreg; | |
381 | u_char old_gpcntl, old_gpreg; | |
382 | u_char ack_data; | |
383 | int x; | |
384 | ||
385 | /* save current state of GPCNTL and GPREG */ | |
386 | old_gpreg = INB(np, nc_gpreg); | |
387 | old_gpcntl = INB(np, nc_gpcntl); | |
388 | gpcntl = old_gpcntl & 0x1c; | |
389 | ||
390 | /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ | |
391 | OUTB(np, nc_gpreg, old_gpreg); | |
392 | OUTB(np, nc_gpcntl, gpcntl); | |
393 | ||
394 | /* this is to set NVRAM into a known state with GPIO0/1 both low */ | |
395 | gpreg = old_gpreg; | |
396 | S24C16_set_bit(np, 0, &gpreg, CLR_CLK); | |
397 | S24C16_set_bit(np, 0, &gpreg, CLR_BIT); | |
398 | ||
399 | /* now set NVRAM inactive with GPIO0/1 both high */ | |
400 | S24C16_stop(np, &gpreg); | |
401 | ||
402 | /* NVRAM has to be written in segments of 16 bytes */ | |
403 | for (x = 0; x < len ; x += 16) { | |
404 | do { | |
405 | S24C16_start(np, &gpreg); | |
406 | S24C16_write_byte(np, &ack_data, | |
407 | 0xa0 | (((offset+x) >> 7) & 0x0e), | |
408 | &gpreg, &gpcntl); | |
409 | } while (ack_data & 0x01); | |
410 | ||
411 | S24C16_write_byte(np, &ack_data, (offset+x) & 0xff, | |
412 | &gpreg, &gpcntl); | |
413 | ||
414 | for (y = 0; y < 16; y++) | |
415 | S24C16_write_byte(np, &ack_data, data[x+y], | |
416 | &gpreg, &gpcntl); | |
417 | S24C16_stop(np, &gpreg); | |
418 | } | |
419 | ||
420 | /* return GPIO0/1 to original states after having accessed NVRAM */ | |
421 | OUTB(np, nc_gpcntl, old_gpcntl); | |
422 | OUTB(np, nc_gpreg, old_gpreg); | |
423 | ||
424 | return 0; | |
425 | } | |
426 | #endif /* SYM_CONF_NVRAM_WRITE_SUPPORT */ | |
427 | ||
428 | /* | |
429 | * Read 'len' bytes starting at 'offset'. | |
430 | */ | |
431 | static int sym_read_S24C16_nvram(struct sym_device *np, int offset, u_char *data, int len) | |
432 | { | |
433 | u_char gpcntl, gpreg; | |
434 | u_char old_gpcntl, old_gpreg; | |
435 | u_char ack_data; | |
436 | int retv = 1; | |
437 | int x; | |
438 | ||
439 | /* save current state of GPCNTL and GPREG */ | |
440 | old_gpreg = INB(np, nc_gpreg); | |
441 | old_gpcntl = INB(np, nc_gpcntl); | |
442 | gpcntl = old_gpcntl & 0x1c; | |
443 | ||
444 | /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ | |
445 | OUTB(np, nc_gpreg, old_gpreg); | |
446 | OUTB(np, nc_gpcntl, gpcntl); | |
447 | ||
448 | /* this is to set NVRAM into a known state with GPIO0/1 both low */ | |
449 | gpreg = old_gpreg; | |
450 | S24C16_set_bit(np, 0, &gpreg, CLR_CLK); | |
451 | S24C16_set_bit(np, 0, &gpreg, CLR_BIT); | |
452 | ||
453 | /* now set NVRAM inactive with GPIO0/1 both high */ | |
454 | S24C16_stop(np, &gpreg); | |
455 | ||
456 | /* activate NVRAM */ | |
457 | S24C16_start(np, &gpreg); | |
458 | ||
459 | /* write device code and random address MSB */ | |
460 | S24C16_write_byte(np, &ack_data, | |
461 | 0xa0 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); | |
462 | if (ack_data & 0x01) | |
463 | goto out; | |
464 | ||
465 | /* write random address LSB */ | |
466 | S24C16_write_byte(np, &ack_data, | |
467 | offset & 0xff, &gpreg, &gpcntl); | |
468 | if (ack_data & 0x01) | |
469 | goto out; | |
470 | ||
471 | /* regenerate START state to set up for reading */ | |
472 | S24C16_start(np, &gpreg); | |
473 | ||
474 | /* rewrite device code and address MSB with read bit set (lsb = 0x01) */ | |
475 | S24C16_write_byte(np, &ack_data, | |
476 | 0xa1 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); | |
477 | if (ack_data & 0x01) | |
478 | goto out; | |
479 | ||
480 | /* now set up GPIO0 for inputting data */ | |
481 | gpcntl |= 0x01; | |
482 | OUTB(np, nc_gpcntl, gpcntl); | |
483 | ||
484 | /* input all requested data - only part of total NVRAM */ | |
485 | for (x = 0; x < len; x++) | |
486 | S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl); | |
487 | ||
488 | /* finally put NVRAM back in inactive mode */ | |
489 | gpcntl &= 0xfe; | |
490 | OUTB(np, nc_gpcntl, gpcntl); | |
491 | S24C16_stop(np, &gpreg); | |
492 | retv = 0; | |
493 | out: | |
494 | /* return GPIO0/1 to original states after having accessed NVRAM */ | |
495 | OUTB(np, nc_gpcntl, old_gpcntl); | |
496 | OUTB(np, nc_gpreg, old_gpreg); | |
497 | ||
498 | return retv; | |
499 | } | |
500 | ||
501 | #undef SET_BIT | |
502 | #undef CLR_BIT | |
503 | #undef SET_CLK | |
504 | #undef CLR_CLK | |
505 | ||
506 | /* | |
507 | * Try reading Symbios NVRAM. | |
508 | * Return 0 if OK. | |
509 | */ | |
510 | static int sym_read_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) | |
511 | { | |
512 | static u_char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0}; | |
513 | u_char *data = (u_char *) nvram; | |
514 | int len = sizeof(*nvram); | |
515 | u_short csum; | |
516 | int x; | |
517 | ||
518 | /* probe the 24c16 and read the SYMBIOS 24c16 area */ | |
519 | if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS, data, len)) | |
520 | return 1; | |
521 | ||
522 | /* check valid NVRAM signature, verify byte count and checksum */ | |
523 | if (nvram->type != 0 || | |
524 | memcmp(nvram->trailer, Symbios_trailer, 6) || | |
525 | nvram->byte_count != len - 12) | |
526 | return 1; | |
527 | ||
528 | /* verify checksum */ | |
529 | for (x = 6, csum = 0; x < len - 6; x++) | |
530 | csum += data[x]; | |
531 | if (csum != nvram->checksum) | |
532 | return 1; | |
533 | ||
534 | return 0; | |
535 | } | |
536 | ||
537 | /* | |
538 | * 93C46 EEPROM reading. | |
539 | * | |
540 | * GPOI0 - data in | |
541 | * GPIO1 - data out | |
542 | * GPIO2 - clock | |
543 | * GPIO4 - chip select | |
544 | * | |
545 | * Used by Tekram. | |
546 | */ | |
547 | ||
548 | /* | |
549 | * Pulse clock bit in GPIO0 | |
550 | */ | |
551 | static void T93C46_Clk(struct sym_device *np, u_char *gpreg) | |
552 | { | |
553 | OUTB(np, nc_gpreg, *gpreg | 0x04); | |
53222b90 | 554 | INB(np, nc_mbox1); |
1da177e4 LT |
555 | udelay(2); |
556 | OUTB(np, nc_gpreg, *gpreg); | |
557 | } | |
558 | ||
559 | /* | |
560 | * Read bit from NVRAM | |
561 | */ | |
562 | static void T93C46_Read_Bit(struct sym_device *np, u_char *read_bit, u_char *gpreg) | |
563 | { | |
564 | udelay(2); | |
565 | T93C46_Clk(np, gpreg); | |
566 | *read_bit = INB(np, nc_gpreg); | |
567 | } | |
568 | ||
569 | /* | |
570 | * Write bit to GPIO0 | |
571 | */ | |
572 | static void T93C46_Write_Bit(struct sym_device *np, u_char write_bit, u_char *gpreg) | |
573 | { | |
574 | if (write_bit & 0x01) | |
575 | *gpreg |= 0x02; | |
576 | else | |
577 | *gpreg &= 0xfd; | |
578 | ||
579 | *gpreg |= 0x10; | |
580 | ||
581 | OUTB(np, nc_gpreg, *gpreg); | |
53222b90 | 582 | INB(np, nc_mbox1); |
1da177e4 LT |
583 | udelay(2); |
584 | ||
585 | T93C46_Clk(np, gpreg); | |
586 | } | |
587 | ||
588 | /* | |
589 | * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!! | |
590 | */ | |
591 | static void T93C46_Stop(struct sym_device *np, u_char *gpreg) | |
592 | { | |
593 | *gpreg &= 0xef; | |
594 | OUTB(np, nc_gpreg, *gpreg); | |
53222b90 | 595 | INB(np, nc_mbox1); |
1da177e4 LT |
596 | udelay(2); |
597 | ||
598 | T93C46_Clk(np, gpreg); | |
599 | } | |
600 | ||
601 | /* | |
602 | * Send read command and address to NVRAM | |
603 | */ | |
604 | static void T93C46_Send_Command(struct sym_device *np, u_short write_data, | |
605 | u_char *read_bit, u_char *gpreg) | |
606 | { | |
607 | int x; | |
608 | ||
609 | /* send 9 bits, start bit (1), command (2), address (6) */ | |
610 | for (x = 0; x < 9; x++) | |
611 | T93C46_Write_Bit(np, (u_char) (write_data >> (8 - x)), gpreg); | |
612 | ||
613 | *read_bit = INB(np, nc_gpreg); | |
614 | } | |
615 | ||
616 | /* | |
617 | * READ 2 bytes from the NVRAM | |
618 | */ | |
619 | static void T93C46_Read_Word(struct sym_device *np, | |
620 | unsigned short *nvram_data, unsigned char *gpreg) | |
621 | { | |
622 | int x; | |
623 | u_char read_bit; | |
624 | ||
625 | *nvram_data = 0; | |
626 | for (x = 0; x < 16; x++) { | |
627 | T93C46_Read_Bit(np, &read_bit, gpreg); | |
628 | ||
629 | if (read_bit & 0x01) | |
630 | *nvram_data |= (0x01 << (15 - x)); | |
631 | else | |
632 | *nvram_data &= ~(0x01 << (15 - x)); | |
633 | } | |
634 | } | |
635 | ||
636 | /* | |
637 | * Read Tekram NvRAM data. | |
638 | */ | |
639 | static int T93C46_Read_Data(struct sym_device *np, unsigned short *data, | |
640 | int len, unsigned char *gpreg) | |
641 | { | |
642 | int x; | |
643 | ||
644 | for (x = 0; x < len; x++) { | |
645 | unsigned char read_bit; | |
646 | /* output read command and address */ | |
647 | T93C46_Send_Command(np, 0x180 | x, &read_bit, gpreg); | |
648 | if (read_bit & 0x01) | |
649 | return 1; /* Bad */ | |
650 | T93C46_Read_Word(np, &data[x], gpreg); | |
651 | T93C46_Stop(np, gpreg); | |
652 | } | |
653 | ||
654 | return 0; | |
655 | } | |
656 | ||
657 | /* | |
658 | * Try reading 93C46 Tekram NVRAM. | |
659 | */ | |
660 | static int sym_read_T93C46_nvram(struct sym_device *np, Tekram_nvram *nvram) | |
661 | { | |
662 | u_char gpcntl, gpreg; | |
663 | u_char old_gpcntl, old_gpreg; | |
664 | int retv = 1; | |
665 | ||
666 | /* save current state of GPCNTL and GPREG */ | |
667 | old_gpreg = INB(np, nc_gpreg); | |
668 | old_gpcntl = INB(np, nc_gpcntl); | |
669 | ||
670 | /* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in, | |
671 | 1/2/4 out */ | |
672 | gpreg = old_gpreg & 0xe9; | |
673 | OUTB(np, nc_gpreg, gpreg); | |
674 | gpcntl = (old_gpcntl & 0xe9) | 0x09; | |
675 | OUTB(np, nc_gpcntl, gpcntl); | |
676 | ||
677 | /* input all of NVRAM, 64 words */ | |
678 | retv = T93C46_Read_Data(np, (u_short *) nvram, | |
679 | sizeof(*nvram) / sizeof(short), &gpreg); | |
680 | ||
681 | /* return GPIO0/1/2/4 to original states after having accessed NVRAM */ | |
682 | OUTB(np, nc_gpcntl, old_gpcntl); | |
683 | OUTB(np, nc_gpreg, old_gpreg); | |
684 | ||
685 | return retv; | |
686 | } | |
687 | ||
688 | /* | |
689 | * Try reading Tekram NVRAM. | |
690 | * Return 0 if OK. | |
691 | */ | |
692 | static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram) | |
693 | { | |
694 | u_char *data = (u_char *) nvram; | |
695 | int len = sizeof(*nvram); | |
696 | u_short csum; | |
697 | int x; | |
698 | ||
e58bc06e | 699 | switch (np->pdev->device) { |
1da177e4 LT |
700 | case PCI_DEVICE_ID_NCR_53C885: |
701 | case PCI_DEVICE_ID_NCR_53C895: | |
702 | case PCI_DEVICE_ID_NCR_53C896: | |
703 | x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, | |
704 | data, len); | |
705 | break; | |
706 | case PCI_DEVICE_ID_NCR_53C875: | |
707 | x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, | |
708 | data, len); | |
709 | if (!x) | |
710 | break; | |
711 | default: | |
712 | x = sym_read_T93C46_nvram(np, nvram); | |
713 | break; | |
714 | } | |
715 | if (x) | |
716 | return 1; | |
717 | ||
718 | /* verify checksum */ | |
719 | for (x = 0, csum = 0; x < len - 1; x += 2) | |
720 | csum += data[x] + (data[x+1] << 8); | |
721 | if (csum != 0x1234) | |
722 | return 1; | |
723 | ||
724 | return 0; | |
725 | } | |
726 | ||
727 | #ifdef CONFIG_PARISC | |
728 | /* | |
729 | * Host firmware (PDC) keeps a table for altering SCSI capabilities. | |
730 | * Many newer machines export one channel of 53c896 chip as SE, 50-pin HD. | |
731 | * Also used for Multi-initiator SCSI clusters to set the SCSI Initiator ID. | |
732 | */ | |
733 | static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *pdc) | |
734 | { | |
735 | struct hardware_path hwpath; | |
736 | get_pci_node_path(np->pdev, &hwpath); | |
737 | if (!pdc_get_initiator(&hwpath, pdc)) | |
738 | return 0; | |
739 | ||
740 | return SYM_PARISC_PDC; | |
741 | } | |
742 | #else | |
53222b90 MW |
743 | static inline int sym_read_parisc_pdc(struct sym_device *np, |
744 | struct pdc_initiator *x) | |
1da177e4 LT |
745 | { |
746 | return 0; | |
747 | } | |
748 | #endif | |
749 | ||
750 | /* | |
751 | * Try reading Symbios or Tekram NVRAM | |
752 | */ | |
753 | int sym_read_nvram(struct sym_device *np, struct sym_nvram *nvp) | |
754 | { | |
755 | if (!sym_read_Symbios_nvram(np, &nvp->data.Symbios)) { | |
756 | nvp->type = SYM_SYMBIOS_NVRAM; | |
757 | sym_display_Symbios_nvram(np, &nvp->data.Symbios); | |
758 | } else if (!sym_read_Tekram_nvram(np, &nvp->data.Tekram)) { | |
759 | nvp->type = SYM_TEKRAM_NVRAM; | |
760 | sym_display_Tekram_nvram(np, &nvp->data.Tekram); | |
761 | } else { | |
762 | nvp->type = sym_read_parisc_pdc(np, &nvp->data.parisc); | |
763 | } | |
764 | return nvp->type; | |
765 | } | |
766 | ||
767 | char *sym_nvram_type(struct sym_nvram *nvp) | |
768 | { | |
769 | switch (nvp->type) { | |
770 | case SYM_SYMBIOS_NVRAM: | |
771 | return "Symbios NVRAM"; | |
772 | case SYM_TEKRAM_NVRAM: | |
773 | return "Tekram NVRAM"; | |
774 | case SYM_PARISC_PDC: | |
775 | return "PA-RISC Firmware"; | |
776 | default: | |
777 | return "No NVRAM"; | |
778 | } | |
779 | } |