]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Serial device configuration | |
3 | # | |
4 | # $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $ | |
5 | # | |
6 | ||
7 | menu "Serial drivers" | |
e25df120 | 8 | depends on HAS_IOMEM |
1da177e4 LT |
9 | |
10 | # | |
11 | # The new 8250/16550 serial drivers | |
12 | config SERIAL_8250 | |
13 | tristate "8250/16550 and compatible serial support" | |
0b57ee9e | 14 | depends on (BROKEN || !SPARC) |
1da177e4 LT |
15 | select SERIAL_CORE |
16 | ---help--- | |
17 | This selects whether you want to include the driver for the standard | |
18 | serial ports. The standard answer is Y. People who might say N | |
19 | here are those that are setting up dedicated Ethernet WWW/FTP | |
20 | servers, or users that have one of the various bus mice instead of a | |
21 | serial mouse and don't intend to use their machine's standard serial | |
22 | port for anything. (Note that the Cyclades and Stallion multi | |
23 | serial port drivers do not need this driver built in for them to | |
24 | work.) | |
25 | ||
26 | To compile this driver as a module, choose M here: the | |
df7559d3 | 27 | module will be called 8250. |
1da177e4 LT |
28 | [WARNING: Do not compile this driver as a module if you are using |
29 | non-standard serial ports, since the configuration information will | |
30 | be lost when the driver is unloaded. This limitation may be lifted | |
31 | in the future.] | |
32 | ||
33 | BTW1: If you have a mouseman serial mouse which is not recognized by | |
34 | the X window system, try running gpm first. | |
35 | ||
36 | BTW2: If you intend to use a software modem (also called Winmodem) | |
37 | under Linux, forget it. These modems are crippled and require | |
38 | proprietary drivers which are only available under Windows. | |
39 | ||
40 | Most people will say Y or M here, so that they can use serial mice, | |
41 | modems and similar devices connecting to the standard serial ports. | |
42 | ||
43 | config SERIAL_8250_CONSOLE | |
44 | bool "Console on 8250/16550 and compatible serial port" | |
45 | depends on SERIAL_8250=y | |
46 | select SERIAL_CORE_CONSOLE | |
47 | ---help--- | |
48 | If you say Y here, it will be possible to use a serial port as the | |
49 | system console (the system console is the device which receives all | |
50 | kernel messages and warnings and which allows logins in single user | |
51 | mode). This could be useful if some terminal or printer is connected | |
52 | to that serial port. | |
53 | ||
54 | Even if you say Y here, the currently visible virtual console | |
55 | (/dev/tty0) will still be used as the system console by default, but | |
56 | you can alter that using a kernel command line option such as | |
57 | "console=ttyS1". (Try "man bootparam" or see the documentation of | |
58 | your boot loader (grub or lilo or loadlin) about how to pass options | |
59 | to the kernel at boot time.) | |
60 | ||
61 | If you don't have a VGA card installed and you say Y here, the | |
62 | kernel will automatically use the first serial line, /dev/ttyS0, as | |
63 | system console. | |
64 | ||
18a8bd94 YL |
65 | you can set that using a kernel command line option such as |
66 | "console=uart8250,io,0x3f8,9600n8" | |
67 | "console=uart8250,mmio,0xff5e0000,115200n8". | |
68 | and it will switch to normal serial console when correponding port is | |
69 | ready. | |
70 | "earlycon=uart8250,io,0x3f8,9600n8" | |
71 | "earlycon=uart8250,mmio,0xff5e0000,115200n8". | |
72 | it will not only setup early console. | |
73 | ||
1da177e4 LT |
74 | If unsure, say N. |
75 | ||
18a8bd94 YL |
76 | config FIX_EARLYCON_MEM |
77 | bool | |
78 | depends on X86 | |
79 | default y | |
80 | ||
0cff260a RK |
81 | config SERIAL_8250_GSC |
82 | tristate | |
83 | depends on SERIAL_8250 && GSC | |
84 | default SERIAL_8250 | |
85 | ||
86 | config SERIAL_8250_PCI | |
87 | tristate "8250/16550 PCI device support" if EMBEDDED | |
88 | depends on SERIAL_8250 && PCI | |
89 | default SERIAL_8250 | |
90 | help | |
7e92b4fc BH |
91 | Say Y here if you have PCI serial ports. |
92 | ||
93 | To compile this driver as a module, choose M here: the module | |
94 | will be called 8250_pci. | |
0cff260a RK |
95 | |
96 | config SERIAL_8250_PNP | |
97 | tristate "8250/16550 PNP device support" if EMBEDDED | |
98 | depends on SERIAL_8250 && PNP | |
99 | default SERIAL_8250 | |
100 | help | |
7e92b4fc BH |
101 | Say Y here if you have serial ports described by PNPBIOS or ACPI. |
102 | These are typically ports built into the system board. | |
103 | ||
104 | To compile this driver as a module, choose M here: the module | |
105 | will be called 8250_pnp. | |
0cff260a RK |
106 | |
107 | config SERIAL_8250_HP300 | |
108 | tristate | |
109 | depends on SERIAL_8250 && HP300 | |
110 | default SERIAL_8250 | |
111 | ||
1da177e4 LT |
112 | config SERIAL_8250_CS |
113 | tristate "8250/16550 PCMCIA device support" | |
114 | depends on PCMCIA && SERIAL_8250 | |
115 | ---help--- | |
116 | Say Y here to enable support for 16-bit PCMCIA serial devices, | |
117 | including serial port cards, modems, and the modem functions of | |
118 | multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are | |
119 | credit-card size devices often used with laptops.) | |
120 | ||
121 | To compile this driver as a module, choose M here: the | |
122 | module will be called serial_cs. | |
123 | ||
124 | If unsure, say N. | |
125 | ||
1da177e4 | 126 | config SERIAL_8250_NR_UARTS |
026d02a2 | 127 | int "Maximum number of 8250/16550 serial ports" |
1da177e4 LT |
128 | depends on SERIAL_8250 |
129 | default "4" | |
ec9f47cd RK |
130 | help |
131 | Set this to the number of serial ports you want the driver | |
132 | to support. This includes any ports discovered via ACPI or | |
133 | PCI enumeration and any ports that may be added at run-time | |
134 | via hot-plug, or any ISA multi-port serial cards. | |
1da177e4 | 135 | |
a61c2d78 DJ |
136 | config SERIAL_8250_RUNTIME_UARTS |
137 | int "Number of 8250/16550 serial ports to register at runtime" | |
138 | depends on SERIAL_8250 | |
9a8ffccf | 139 | range 0 SERIAL_8250_NR_UARTS |
a61c2d78 DJ |
140 | default "4" |
141 | help | |
142 | Set this to the maximum number of serial ports you want | |
09509603 | 143 | the kernel to register at boot time. This can be overridden |
a61c2d78 DJ |
144 | with the module parameter "nr_uarts", or boot-time parameter |
145 | 8250.nr_uarts | |
146 | ||
1da177e4 LT |
147 | config SERIAL_8250_EXTENDED |
148 | bool "Extended 8250/16550 serial driver options" | |
149 | depends on SERIAL_8250 | |
150 | help | |
151 | If you wish to use any non-standard features of the standard "dumb" | |
152 | driver, say Y here. This includes HUB6 support, shared serial | |
153 | interrupts, special multiport support, support for more than the | |
154 | four COM 1/2/3/4 boards, etc. | |
155 | ||
156 | Note that the answer to this question won't directly affect the | |
157 | kernel: saying N will just cause the configurator to skip all | |
158 | the questions about serial driver options. If unsure, say N. | |
159 | ||
160 | config SERIAL_8250_MANY_PORTS | |
161 | bool "Support more than 4 legacy serial ports" | |
162 | depends on SERIAL_8250_EXTENDED && !IA64 | |
163 | help | |
164 | Say Y here if you have dumb serial boards other than the four | |
165 | standard COM 1/2/3/4 ports. This may happen if you have an AST | |
166 | FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available | |
167 | from <http://www.tldp.org/docs.html#howto>), or other custom | |
168 | serial port hardware which acts similar to standard serial port | |
169 | hardware. If you only use the standard COM 1/2/3/4 ports, you can | |
170 | say N here to save some memory. You can also say Y if you have an | |
171 | "intelligent" multiport card such as Cyclades, Digiboards, etc. | |
172 | ||
ec9f47cd RK |
173 | # |
174 | # Multi-port serial cards | |
175 | # | |
176 | ||
177 | config SERIAL_8250_FOURPORT | |
178 | tristate "Support Fourport cards" | |
179 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
180 | help | |
181 | Say Y here if you have an AST FourPort serial board. | |
182 | ||
183 | To compile this driver as a module, choose M here: the module | |
184 | will be called 8250_fourport. | |
185 | ||
186 | config SERIAL_8250_ACCENT | |
187 | tristate "Support Accent cards" | |
188 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
189 | help | |
190 | Say Y here if you have an Accent Async serial board. | |
191 | ||
192 | To compile this driver as a module, choose M here: the module | |
193 | will be called 8250_accent. | |
194 | ||
ec9f47cd RK |
195 | config SERIAL_8250_BOCA |
196 | tristate "Support Boca cards" | |
197 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
198 | help | |
199 | Say Y here if you have a Boca serial board. Please read the Boca | |
09509603 | 200 | mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> |
ec9f47cd RK |
201 | |
202 | To compile this driver as a module, choose M here: the module | |
203 | will be called 8250_boca. | |
204 | ||
e0980daf PS |
205 | config SERIAL_8250_EXAR_ST16C554 |
206 | tristate "Support Exar ST16C554/554D Quad UART" | |
207 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
208 | help | |
209 | The Uplogix Envoy TU301 uses this Exar Quad UART. If you are | |
210 | tinkering with your Envoy TU301, or have a machine with this UART, | |
211 | say Y here. | |
212 | ||
213 | To compile this driver as a module, choose M here: the module | |
214 | will be called 8250_exar_st16c554. | |
215 | ||
ec9f47cd RK |
216 | config SERIAL_8250_HUB6 |
217 | tristate "Support Hub6 cards" | |
218 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
219 | help | |
220 | Say Y here if you have a HUB6 serial board. | |
221 | ||
222 | To compile this driver as a module, choose M here: the module | |
223 | will be called 8250_hub6. | |
224 | ||
bf4735a4 DM |
225 | config SERIAL_8250_SHARE_IRQ |
226 | bool "Support for sharing serial interrupts" | |
227 | depends on SERIAL_8250_EXTENDED | |
228 | help | |
229 | Some serial boards have hardware support which allows multiple dumb | |
230 | serial ports on the same board to share a single IRQ. To enable | |
231 | support for this in the serial driver, say Y here. | |
232 | ||
233 | config SERIAL_8250_DETECT_IRQ | |
234 | bool "Autodetect IRQ on standard ports (unsafe)" | |
235 | depends on SERIAL_8250_EXTENDED | |
236 | help | |
237 | Say Y here if you want the kernel to try to guess which IRQ | |
238 | to use for your serial port. | |
239 | ||
240 | This is considered unsafe; it is far better to configure the IRQ in | |
241 | a boot script using the setserial command. | |
242 | ||
243 | If unsure, say N. | |
244 | ||
245 | config SERIAL_8250_RSA | |
246 | bool "Support RSA serial ports" | |
247 | depends on SERIAL_8250_EXTENDED | |
248 | help | |
249 | ::: To be written ::: | |
250 | ||
ec9f47cd RK |
251 | config SERIAL_8250_MCA |
252 | tristate "Support 8250-type ports on MCA buses" | |
253 | depends on SERIAL_8250 != n && MCA | |
254 | help | |
255 | Say Y here if you have a MCA serial ports. | |
256 | ||
257 | To compile this driver as a module, choose M here: the module | |
258 | will be called 8250_mca. | |
1da177e4 LT |
259 | |
260 | config SERIAL_8250_ACORN | |
261 | tristate "Acorn expansion card serial port support" | |
ec9f47cd | 262 | depends on ARCH_ACORN && SERIAL_8250 |
1da177e4 LT |
263 | help |
264 | If you have an Atomwide Serial card or Serial Port card for an Acorn | |
265 | system, say Y to this option. The driver can handle 1, 2, or 3 port | |
266 | cards. If unsure, say N. | |
267 | ||
21c614a7 PA |
268 | config SERIAL_8250_AU1X00 |
269 | bool "AU1X00 serial port support" | |
270 | depends on SERIAL_8250 != n && SOC_AU1X00 | |
271 | help | |
272 | If you have an Au1x00 board and want to use the serial port, say Y | |
273 | to this option. The driver can handle 1 or 2 serial ports. | |
274 | If unsure, say N. | |
275 | ||
bd71c182 TK |
276 | config SERIAL_8250_RM9K |
277 | bool "Support for MIPS RM9xxx integrated serial port" | |
278 | depends on SERIAL_8250 != n && SERIAL_RM9000 | |
279 | select SERIAL_8250_SHARE_IRQ | |
280 | help | |
281 | Selecting this option will add support for the integrated serial | |
282 | port hardware found on MIPS RM9122 and similar processors. | |
283 | If unsure, say N. | |
284 | ||
ec9f47cd RK |
285 | comment "Non-8250 serial port support" |
286 | ||
1da177e4 LT |
287 | config SERIAL_AMBA_PL010 |
288 | tristate "ARM AMBA PL010 serial port support" | |
84b6a232 | 289 | depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) |
1da177e4 LT |
290 | select SERIAL_CORE |
291 | help | |
292 | This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have | |
00584719 LB |
293 | an Integrator/AP or Integrator/PP2 platform, or if you have a |
294 | Cirrus Logic EP93xx CPU, say Y or M here. | |
1da177e4 LT |
295 | |
296 | If unsure, say N. | |
297 | ||
298 | config SERIAL_AMBA_PL010_CONSOLE | |
299 | bool "Support for console on AMBA serial port" | |
300 | depends on SERIAL_AMBA_PL010=y | |
301 | select SERIAL_CORE_CONSOLE | |
302 | ---help--- | |
303 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
304 | console (the system console is the device which receives all kernel | |
305 | messages and warnings and which allows logins in single user mode). | |
306 | ||
307 | Even if you say Y here, the currently visible framebuffer console | |
308 | (/dev/tty0) will still be used as the system console by default, but | |
309 | you can alter that using a kernel command line option such as | |
310 | "console=ttyAM0". (Try "man bootparam" or see the documentation of | |
311 | your boot loader (lilo or loadlin) about how to pass options to the | |
312 | kernel at boot time.) | |
313 | ||
314 | config SERIAL_AMBA_PL011 | |
315 | tristate "ARM AMBA PL011 serial port support" | |
316 | depends on ARM_AMBA | |
317 | select SERIAL_CORE | |
318 | help | |
319 | This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have | |
320 | an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M | |
321 | here. | |
322 | ||
323 | If unsure, say N. | |
324 | ||
325 | config SERIAL_AMBA_PL011_CONSOLE | |
326 | bool "Support for console on AMBA serial port" | |
327 | depends on SERIAL_AMBA_PL011=y | |
328 | select SERIAL_CORE_CONSOLE | |
329 | ---help--- | |
330 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
331 | console (the system console is the device which receives all kernel | |
332 | messages and warnings and which allows logins in single user mode). | |
333 | ||
334 | Even if you say Y here, the currently visible framebuffer console | |
335 | (/dev/tty0) will still be used as the system console by default, but | |
336 | you can alter that using a kernel command line option such as | |
b22b4cdd | 337 | "console=ttyAMA0". (Try "man bootparam" or see the documentation of |
1da177e4 LT |
338 | your boot loader (lilo or loadlin) about how to pass options to the |
339 | kernel at boot time.) | |
340 | ||
b45d5279 MR |
341 | config SERIAL_SB1250_DUART |
342 | tristate "BCM1xxx on-chip DUART serial support" | |
343 | depends on SIBYTE_SB1xxx_SOC=y | |
344 | select SERIAL_CORE | |
345 | default y | |
346 | ---help--- | |
347 | Support for the asynchronous serial interface (DUART) included in | |
348 | the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that | |
349 | the letter D in DUART stands for "dual", which is how the device | |
350 | is implemented. Depending on the SOC configuration there may be | |
351 | one or more DUARTs available of which all are handled. | |
352 | ||
353 | If unsure, say Y. To compile this driver as a module, choose M here: | |
354 | the module will be called sb1250-duart. | |
355 | ||
356 | config SERIAL_SB1250_DUART_CONSOLE | |
357 | bool "Support for console on a BCM1xxx DUART serial port" | |
358 | depends on SERIAL_SB1250_DUART=y | |
359 | select SERIAL_CORE_CONSOLE | |
360 | default y | |
361 | ---help--- | |
362 | If you say Y here, it will be possible to use a serial port as the | |
363 | system console (the system console is the device which receives all | |
364 | kernel messages and warnings and which allows logins in single user | |
365 | mode). | |
366 | ||
367 | If unsure, say Y. | |
368 | ||
749c4e60 HS |
369 | config SERIAL_ATMEL |
370 | bool "AT91 / AT32 on-chip serial port support" | |
acca9b83 | 371 | depends on (ARM && ARCH_AT91) || AVR32 |
1e6c9c28 AV |
372 | select SERIAL_CORE |
373 | help | |
afefc415 | 374 | This enables the driver for the on-chip UARTs of the Atmel |
acca9b83 | 375 | AT91 and AT32 processors. |
1e6c9c28 | 376 | |
749c4e60 HS |
377 | config SERIAL_ATMEL_CONSOLE |
378 | bool "Support for console on AT91 / AT32 serial port" | |
379 | depends on SERIAL_ATMEL=y | |
1e6c9c28 AV |
380 | select SERIAL_CORE_CONSOLE |
381 | help | |
acca9b83 HS |
382 | Say Y here if you wish to use an on-chip UART on a Atmel |
383 | AT91 or AT32 processor as the system console (the system | |
384 | console is the device which receives all kernel messages and | |
385 | warnings and which allows logins in single user mode). | |
1e6c9c28 | 386 | |
749c4e60 | 387 | config SERIAL_ATMEL_TTYAT |
acca9b83 | 388 | bool "Install as device ttyATn instead of ttySn" |
749c4e60 | 389 | depends on SERIAL_ATMEL=y |
1e6c9c28 | 390 | help |
acca9b83 HS |
391 | Say Y here if you wish to have the internal AT91 / AT32 UARTs |
392 | appear as /dev/ttyATn (major 204, minor starting at 154) | |
393 | instead of the normal /dev/ttySn (major 4, minor starting at | |
394 | 64). This is necessary if you also want other UARTs, such as | |
395 | external 8250/16C550 compatible UARTs. | |
1e6c9c28 AV |
396 | The ttySn nodes are legally reserved for the 8250 serial driver |
397 | but are often misused by other serial drivers. | |
398 | ||
399 | To use this, you should create suitable ttyATn device nodes in | |
400 | /dev/, and pass "console=ttyATn" to the kernel. | |
401 | ||
402 | Say Y if you have an external 8250/16C550 UART. If unsure, say N. | |
403 | ||
2c7ee6ab AV |
404 | config SERIAL_KS8695 |
405 | bool "Micrel KS8695 (Centaur) serial port support" | |
406 | depends on ARCH_KS8695 | |
407 | select SERIAL_CORE | |
408 | help | |
409 | This selects the Micrel Centaur KS8695 UART. Say Y here. | |
410 | ||
411 | config SERIAL_KS8695_CONSOLE | |
412 | bool "Support for console on KS8695 (Centaur) serial port" | |
413 | depends on SERIAL_KS8695=y | |
414 | select SERIAL_CORE_CONSOLE | |
415 | help | |
416 | Say Y here if you wish to use a KS8695 (Centaur) UART as the | |
417 | system console (the system console is the device which | |
418 | receives all kernel messages and warnings and which allows | |
419 | logins in single user mode). | |
420 | ||
1da177e4 LT |
421 | config SERIAL_CLPS711X |
422 | tristate "CLPS711X serial port support" | |
423 | depends on ARM && ARCH_CLPS711X | |
424 | select SERIAL_CORE | |
425 | help | |
426 | ::: To be written ::: | |
427 | ||
428 | config SERIAL_CLPS711X_CONSOLE | |
429 | bool "Support for console on CLPS711X serial port" | |
430 | depends on SERIAL_CLPS711X=y | |
431 | select SERIAL_CORE_CONSOLE | |
432 | help | |
433 | Even if you say Y here, the currently visible virtual console | |
434 | (/dev/tty0) will still be used as the system console by default, but | |
435 | you can alter that using a kernel command line option such as | |
436 | "console=ttyCL1". (Try "man bootparam" or see the documentation of | |
437 | your boot loader (lilo or loadlin) about how to pass options to the | |
438 | kernel at boot time.) | |
439 | ||
440 | config SERIAL_S3C2410 | |
73e55cb3 | 441 | tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support" |
1da177e4 LT |
442 | depends on ARM && ARCH_S3C2410 |
443 | select SERIAL_CORE | |
444 | help | |
73e55cb3 | 445 | Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, |
1da177e4 LT |
446 | providing /dev/ttySAC0, 1 and 2 (note, some machines may not |
447 | provide all of these ports, depending on how the serial port | |
448 | pins are configured. | |
449 | ||
73e55cb3 BD |
450 | Currently this driver supports the UARTS on the S3C2410, S3C2440, |
451 | S3C2442, S3C2412 and S3C2413 CPUs. | |
452 | ||
1da177e4 LT |
453 | config SERIAL_S3C2410_CONSOLE |
454 | bool "Support for console on S3C2410 serial port" | |
455 | depends on SERIAL_S3C2410=y | |
456 | select SERIAL_CORE_CONSOLE | |
457 | help | |
73e55cb3 | 458 | Allow selection of the S3C24XX on-board serial ports for use as |
1da177e4 LT |
459 | an virtual console. |
460 | ||
461 | Even if you say Y here, the currently visible virtual console | |
462 | (/dev/tty0) will still be used as the system console by default, but | |
463 | you can alter that using a kernel command line option such as | |
464 | "console=ttySACx". (Try "man bootparam" or see the documentation of | |
465 | your boot loader about how to pass options to the kernel at | |
466 | boot time.) | |
467 | ||
1da177e4 LT |
468 | config SERIAL_DZ |
469 | bool "DECstation DZ serial driver" | |
875d43e7 | 470 | depends on MACH_DECSTATION && 32BIT |
1da177e4 LT |
471 | select SERIAL_CORE |
472 | help | |
473 | DZ11-family serial controllers for VAXstations, including the | |
474 | DC7085, M7814, and M7819. | |
475 | ||
476 | config SERIAL_DZ_CONSOLE | |
477 | bool "Support console on DECstation DZ serial driver" | |
478 | depends on SERIAL_DZ=y | |
479 | select SERIAL_CORE_CONSOLE | |
480 | help | |
481 | If you say Y here, it will be possible to use a serial port as the | |
482 | system console (the system console is the device which receives all | |
483 | kernel messages and warnings and which allows logins in single user | |
484 | mode). Note that the firmware uses ttyS0 as the serial console on | |
485 | the Maxine and ttyS2 on the others. | |
486 | ||
487 | If unsure, say Y. | |
488 | ||
489 | config SERIAL_21285 | |
490 | tristate "DC21285 serial port support" | |
491 | depends on ARM && FOOTBRIDGE | |
492 | select SERIAL_CORE | |
493 | help | |
494 | If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ | |
495 | PCI bridge you can enable its onboard serial port by enabling this | |
496 | option. | |
497 | ||
498 | config SERIAL_21285_CONSOLE | |
499 | bool "Console on DC21285 serial port" | |
500 | depends on SERIAL_21285=y | |
501 | select SERIAL_CORE_CONSOLE | |
502 | help | |
503 | If you have enabled the serial port on the 21285 footbridge you can | |
504 | make it the console by answering Y to this option. | |
505 | ||
506 | Even if you say Y here, the currently visible virtual console | |
507 | (/dev/tty0) will still be used as the system console by default, but | |
508 | you can alter that using a kernel command line option such as | |
509 | "console=ttyFB". (Try "man bootparam" or see the documentation of | |
510 | your boot loader (lilo or loadlin) about how to pass options to the | |
511 | kernel at boot time.) | |
512 | ||
1da177e4 LT |
513 | config SERIAL_MPSC |
514 | bool "Marvell MPSC serial port support" | |
515 | depends on PPC32 && MV64X60 | |
516 | select SERIAL_CORE | |
517 | help | |
518 | Say Y here if you want to use the Marvell MPSC serial controller. | |
519 | ||
520 | config SERIAL_MPSC_CONSOLE | |
521 | bool "Support for console on Marvell MPSC serial port" | |
522 | depends on SERIAL_MPSC | |
523 | select SERIAL_CORE_CONSOLE | |
524 | help | |
525 | Say Y here if you want to support a serial console on a Marvell MPSC. | |
526 | ||
527 | config SERIAL_PXA | |
528 | bool "PXA serial port support" | |
529 | depends on ARM && ARCH_PXA | |
530 | select SERIAL_CORE | |
531 | help | |
532 | If you have a machine based on an Intel XScale PXA2xx CPU you | |
533 | can enable its onboard serial ports by enabling this option. | |
534 | ||
535 | config SERIAL_PXA_CONSOLE | |
536 | bool "Console on PXA serial port" | |
537 | depends on SERIAL_PXA | |
538 | select SERIAL_CORE_CONSOLE | |
539 | help | |
540 | If you have enabled the serial port on the Intel XScale PXA | |
541 | CPU you can make it the console by answering Y to this option. | |
542 | ||
543 | Even if you say Y here, the currently visible virtual console | |
544 | (/dev/tty0) will still be used as the system console by default, but | |
545 | you can alter that using a kernel command line option such as | |
546 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
547 | your boot loader (lilo or loadlin) about how to pass options to the | |
548 | kernel at boot time.) | |
549 | ||
550 | config SERIAL_SA1100 | |
551 | bool "SA1100 serial port support" | |
552 | depends on ARM && ARCH_SA1100 | |
553 | select SERIAL_CORE | |
554 | help | |
555 | If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you | |
556 | can enable its onboard serial port by enabling this option. | |
557 | Please read <file:Documentation/arm/SA1100/serial_UART> for further | |
558 | info. | |
559 | ||
560 | config SERIAL_SA1100_CONSOLE | |
561 | bool "Console on SA1100 serial port" | |
562 | depends on SERIAL_SA1100 | |
563 | select SERIAL_CORE_CONSOLE | |
564 | help | |
565 | If you have enabled the serial port on the SA1100/SA1110 StrongARM | |
566 | CPU you can make it the console by answering Y to this option. | |
567 | ||
568 | Even if you say Y here, the currently visible virtual console | |
569 | (/dev/tty0) will still be used as the system console by default, but | |
570 | you can alter that using a kernel command line option such as | |
571 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
572 | your boot loader (lilo or loadlin) about how to pass options to the | |
573 | kernel at boot time.) | |
574 | ||
194de561 BW |
575 | config SERIAL_BFIN |
576 | tristate "Blackfin serial port support" | |
577 | depends on BFIN | |
578 | select SERIAL_CORE | |
579 | select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) | |
580 | help | |
581 | Add support for the built-in UARTs on the Blackfin. | |
582 | ||
583 | To compile this driver as a module, choose M here: the | |
584 | module will be called bfin_5xx. | |
585 | ||
586 | config SERIAL_BFIN_CONSOLE | |
587 | bool "Console on Blackfin serial port" | |
588 | depends on SERIAL_BFIN | |
589 | select SERIAL_CORE_CONSOLE | |
590 | ||
591 | choice | |
592 | prompt "UART Mode" | |
593 | depends on SERIAL_BFIN | |
594 | default SERIAL_BFIN_DMA | |
595 | help | |
596 | This driver supports the built-in serial ports of the Blackfin family | |
597 | of CPUs | |
598 | ||
599 | config SERIAL_BFIN_DMA | |
600 | bool "DMA mode" | |
474f1a66 | 601 | depends on DMA_UNCACHED_1M && !KGDB_UART |
194de561 BW |
602 | help |
603 | This driver works under DMA mode. If this option is selected, the | |
604 | blackfin simple dma driver is also enabled. | |
605 | ||
606 | config SERIAL_BFIN_PIO | |
607 | bool "PIO mode" | |
608 | help | |
609 | This driver works under PIO mode. | |
610 | ||
611 | endchoice | |
612 | ||
613 | config SERIAL_BFIN_UART0 | |
614 | bool "Enable UART0" | |
615 | depends on SERIAL_BFIN | |
616 | help | |
617 | Enable UART0 | |
618 | ||
619 | config BFIN_UART0_CTSRTS | |
620 | bool "Enable UART0 hardware flow control" | |
621 | depends on SERIAL_BFIN_UART0 | |
622 | help | |
623 | Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS | |
624 | signal. | |
625 | ||
626 | config UART0_CTS_PIN | |
627 | int "UART0 CTS pin" | |
628 | depends on BFIN_UART0_CTSRTS | |
629 | default 23 | |
630 | help | |
631 | The default pin is GPIO_GP7. | |
632 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
633 | ||
634 | config UART0_RTS_PIN | |
635 | int "UART0 RTS pin" | |
636 | depends on BFIN_UART0_CTSRTS | |
637 | default 22 | |
638 | help | |
639 | The default pin is GPIO_GP6. | |
640 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
641 | ||
642 | config SERIAL_BFIN_UART1 | |
643 | bool "Enable UART1" | |
f4d640c9 | 644 | depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x) |
194de561 BW |
645 | help |
646 | Enable UART1 | |
647 | ||
648 | config BFIN_UART1_CTSRTS | |
649 | bool "Enable UART1 hardware flow control" | |
650 | depends on SERIAL_BFIN_UART1 | |
651 | help | |
652 | Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS | |
653 | signal. | |
654 | ||
655 | config UART1_CTS_PIN | |
656 | int "UART1 CTS pin" | |
f4d640c9 | 657 | depends on BFIN_UART1_CTSRTS && (BF53x || BF561) |
194de561 BW |
658 | default -1 |
659 | help | |
660 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
661 | ||
662 | config UART1_RTS_PIN | |
663 | int "UART1 RTS pin" | |
f4d640c9 | 664 | depends on BFIN_UART1_CTSRTS && (BF53x || BF561) |
194de561 BW |
665 | default -1 |
666 | help | |
667 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
668 | ||
f4d640c9 RH |
669 | config SERIAL_BFIN_UART2 |
670 | bool "Enable UART2" | |
671 | depends on SERIAL_BFIN && (BF54x) | |
672 | help | |
673 | Enable UART2 | |
674 | ||
675 | config BFIN_UART2_CTSRTS | |
676 | bool "Enable UART2 hardware flow control" | |
677 | depends on SERIAL_BFIN_UART2 | |
678 | help | |
679 | Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS | |
680 | signal. | |
681 | ||
682 | config UART2_CTS_PIN | |
683 | int "UART2 CTS pin" | |
684 | depends on BFIN_UART2_CTSRTS | |
685 | default -1 | |
686 | help | |
687 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
688 | ||
689 | config UART2_RTS_PIN | |
690 | int "UART2 RTS pin" | |
691 | depends on BFIN_UART2_CTSRTS | |
692 | default -1 | |
693 | help | |
694 | Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. | |
695 | ||
696 | config SERIAL_BFIN_UART3 | |
697 | bool "Enable UART3" | |
698 | depends on SERIAL_BFIN && (BF54x) | |
699 | help | |
700 | Enable UART3 | |
701 | ||
702 | config BFIN_UART3_CTSRTS | |
703 | bool "Enable UART3 hardware flow control" | |
704 | depends on SERIAL_BFIN_UART3 | |
705 | help | |
706 | Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS | |
707 | signal. | |
708 | ||
1da177e4 LT |
709 | config SERIAL_IMX |
710 | bool "IMX serial port support" | |
711 | depends on ARM && ARCH_IMX | |
712 | select SERIAL_CORE | |
713 | help | |
714 | If you have a machine based on a Motorola IMX CPU you | |
715 | can enable its onboard serial port by enabling this option. | |
716 | ||
717 | config SERIAL_IMX_CONSOLE | |
718 | bool "Console on IMX serial port" | |
719 | depends on SERIAL_IMX | |
720 | select SERIAL_CORE_CONSOLE | |
721 | help | |
722 | If you have enabled the serial port on the Motorola IMX | |
723 | CPU you can make it the console by answering Y to this option. | |
724 | ||
725 | Even if you say Y here, the currently visible virtual console | |
726 | (/dev/tty0) will still be used as the system console by default, but | |
727 | you can alter that using a kernel command line option such as | |
728 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
729 | your boot loader (lilo or loadlin) about how to pass options to the | |
730 | kernel at boot time.) | |
731 | ||
238b8721 PK |
732 | config SERIAL_UARTLITE |
733 | tristate "Xilinx uartlite serial port support" | |
734 | depends on PPC32 | |
735 | select SERIAL_CORE | |
736 | help | |
737 | Say Y here if you want to use the Xilinx uartlite serial controller. | |
738 | ||
739 | To compile this driver as a module, choose M here: the | |
740 | module will be called uartlite.ko. | |
741 | ||
742 | config SERIAL_UARTLITE_CONSOLE | |
743 | bool "Support for console on Xilinx uartlite serial port" | |
744 | depends on SERIAL_UARTLITE=y | |
745 | select SERIAL_CORE_CONSOLE | |
746 | help | |
747 | Say Y here if you wish to use a Xilinx uartlite as the system | |
748 | console (the system console is the device which receives all kernel | |
749 | messages and warnings and which allows logins in single user mode). | |
750 | ||
1da177e4 LT |
751 | config SERIAL_SUNCORE |
752 | bool | |
0b57ee9e | 753 | depends on SPARC |
1da177e4 LT |
754 | select SERIAL_CORE |
755 | select SERIAL_CORE_CONSOLE | |
756 | default y | |
757 | ||
758 | config SERIAL_SUNZILOG | |
759 | tristate "Sun Zilog8530 serial support" | |
0b57ee9e | 760 | depends on SPARC |
1da177e4 LT |
761 | help |
762 | This driver supports the Zilog8530 serial ports found on many Sparc | |
763 | systems. Say Y or M if you want to be able to these serial ports. | |
764 | ||
765 | config SERIAL_SUNZILOG_CONSOLE | |
766 | bool "Console on Sun Zilog8530 serial port" | |
767 | depends on SERIAL_SUNZILOG=y | |
768 | help | |
769 | If you would like to be able to use the Zilog8530 serial port | |
770 | on your Sparc system as the console, you can do so by answering | |
771 | Y to this option. | |
772 | ||
773 | config SERIAL_SUNSU | |
774 | tristate "Sun SU serial support" | |
0b57ee9e | 775 | depends on SPARC && PCI |
1da177e4 LT |
776 | help |
777 | This driver supports the 8250 serial ports that run the keyboard and | |
778 | mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able | |
779 | to these serial ports. | |
780 | ||
781 | config SERIAL_SUNSU_CONSOLE | |
782 | bool "Console on Sun SU serial port" | |
783 | depends on SERIAL_SUNSU=y | |
784 | help | |
785 | If you would like to be able to use the SU serial port | |
786 | on your Sparc system as the console, you can do so by answering | |
787 | Y to this option. | |
788 | ||
789 | config SERIAL_MUX | |
790 | tristate "Serial MUX support" | |
305f5167 | 791 | depends on GSC |
1da177e4 LT |
792 | select SERIAL_CORE |
793 | default y | |
794 | ---help--- | |
795 | Saying Y here will enable the hardware MUX serial driver for | |
e45da35e CD |
796 | the Nova, K class systems and D class with a 'remote control card'. |
797 | The hardware MUX is not 8250/16550 compatible therefore the | |
798 | /dev/ttyB0 device is shared between the Serial MUX and the PDC | |
799 | software console. The following steps need to be completed to use | |
800 | the Serial MUX: | |
1da177e4 LT |
801 | |
802 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
803 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
804 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
805 | root on this console.) | |
806 | 4. Change the kernel command console parameter to: console=ttyB0 | |
807 | ||
808 | config SERIAL_MUX_CONSOLE | |
809 | bool "Support for console on serial MUX" | |
810 | depends on SERIAL_MUX | |
811 | select SERIAL_CORE_CONSOLE | |
812 | default y | |
813 | ||
814 | config PDC_CONSOLE | |
815 | bool "PDC software console support" | |
816 | depends on PARISC && !SERIAL_MUX && VT | |
817 | default n | |
818 | help | |
819 | Saying Y here will enable the software based PDC console to be | |
820 | used as the system console. This is useful for machines in | |
821 | which the hardware based console has not been written yet. The | |
822 | following steps must be competed to use the PDC console: | |
823 | ||
824 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
825 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
826 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
827 | root on this console.) | |
828 | 4. Change the kernel command console parameter to: console=ttyB0 | |
829 | ||
830 | config SERIAL_SUNSAB | |
831 | tristate "Sun Siemens SAB82532 serial support" | |
0b57ee9e | 832 | depends on SPARC && PCI |
1da177e4 LT |
833 | help |
834 | This driver supports the Siemens SAB82532 DUSCC serial ports on newer | |
835 | (PCI) UltraSPARC systems. Say Y or M if you want to be able to these | |
836 | serial ports. | |
837 | ||
838 | config SERIAL_SUNSAB_CONSOLE | |
839 | bool "Console on Sun Siemens SAB82532 serial port" | |
840 | depends on SERIAL_SUNSAB=y | |
841 | help | |
842 | If you would like to be able to use the SAB82532 serial port | |
843 | on your Sparc system as the console, you can do so by answering | |
844 | Y to this option. | |
845 | ||
02fd473b DM |
846 | config SERIAL_SUNHV |
847 | bool "Sun4v Hypervisor Console support" | |
848 | depends on SPARC64 | |
849 | help | |
850 | This driver supports the console device found on SUN4V Sparc | |
851 | systems. Say Y if you want to be able to use this device. | |
852 | ||
1da177e4 LT |
853 | config SERIAL_IP22_ZILOG |
854 | tristate "IP22 Zilog8530 serial support" | |
855 | depends on SGI_IP22 | |
856 | select SERIAL_CORE | |
857 | help | |
858 | This driver supports the Zilog8530 serial ports found on SGI IP22 | |
859 | systems. Say Y or M if you want to be able to these serial ports. | |
860 | ||
861 | config SERIAL_IP22_ZILOG_CONSOLE | |
862 | bool "Console on IP22 Zilog8530 serial port" | |
863 | depends on SERIAL_IP22_ZILOG=y | |
864 | select SERIAL_CORE_CONSOLE | |
865 | ||
866 | config V850E_UART | |
867 | bool "NEC V850E on-chip UART support" | |
868 | depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1 | |
869 | select SERIAL_CORE | |
870 | default y | |
871 | ||
872 | config V850E_UARTB | |
873 | bool | |
bef1f402 | 874 | depends on V850E_UART && V850E_ME2 |
1da177e4 LT |
875 | default y |
876 | ||
877 | config V850E_UART_CONSOLE | |
878 | bool "Use NEC V850E on-chip UART for console" | |
879 | depends on V850E_UART | |
880 | select SERIAL_CORE_CONSOLE | |
881 | ||
882 | config SERIAL_SH_SCI | |
ecd95616 | 883 | tristate "SuperH SCI(F) serial port support" |
1da177e4 LT |
884 | depends on SUPERH || H8300 |
885 | select SERIAL_CORE | |
886 | ||
ecd95616 PM |
887 | config SERIAL_SH_SCI_NR_UARTS |
888 | int "Maximum number of SCI(F) serial ports" | |
889 | depends on SERIAL_SH_SCI | |
890 | default "2" | |
891 | ||
1da177e4 | 892 | config SERIAL_SH_SCI_CONSOLE |
ecd95616 | 893 | bool "Support for console on SuperH SCI(F)" |
1da177e4 LT |
894 | depends on SERIAL_SH_SCI=y |
895 | select SERIAL_CORE_CONSOLE | |
896 | ||
de8211b9 VW |
897 | config SERIAL_PNX8XXX |
898 | bool "Enable PNX8XXX SoCs' UART Support" | |
899 | depends on MIPS && SOC_PNX8550 | |
900 | select SERIAL_CORE | |
901 | help | |
902 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 | |
903 | and you want to use serial ports, say Y. Otherwise, say N. | |
904 | ||
905 | config SERIAL_PNX8XXX_CONSOLE | |
906 | bool "Enable PNX8XX0 serial console" | |
907 | depends on SERIAL_PNX8XXX | |
908 | select SERIAL_CORE_CONSOLE | |
909 | help | |
910 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 | |
911 | and you want to use serial console, say Y. Otherwise, say N. | |
912 | ||
1da177e4 LT |
913 | config SERIAL_CORE |
914 | tristate | |
915 | ||
916 | config SERIAL_CORE_CONSOLE | |
917 | bool | |
918 | ||
919 | config SERIAL_68328 | |
920 | bool "68328 serial support" | |
921 | depends on M68328 || M68EZ328 || M68VZ328 | |
922 | help | |
923 | This driver supports the built-in serial port of the Motorola 68328 | |
09509603 | 924 | (standard, EZ and VZ varieties). |
1da177e4 LT |
925 | |
926 | config SERIAL_68328_RTS_CTS | |
927 | bool "Support RTS/CTS on 68328 serial port" | |
928 | depends on SERIAL_68328 | |
929 | ||
930 | config SERIAL_COLDFIRE | |
931 | bool "ColdFire serial support" | |
932 | depends on COLDFIRE | |
933 | help | |
934 | This driver supports the built-in serial ports of the Motorola ColdFire | |
935 | family of CPUs. | |
936 | ||
937 | config SERIAL_68360_SMC | |
938 | bool "68360 SMC uart support" | |
939 | depends on M68360 | |
940 | help | |
941 | This driver supports the SMC serial ports of the Motorola 68360 CPU. | |
942 | ||
943 | config SERIAL_68360_SCC | |
944 | bool "68360 SCC uart support" | |
945 | depends on M68360 | |
946 | help | |
947 | This driver supports the SCC serial ports of the Motorola 68360 CPU. | |
948 | ||
949 | config SERIAL_68360 | |
950 | bool | |
951 | depends on SERIAL_68360_SMC || SERIAL_68360_SCC | |
952 | default y | |
953 | ||
954 | config SERIAL_PMACZILOG | |
955 | tristate "PowerMac z85c30 ESCC support" | |
956 | depends on PPC_OF && PPC_PMAC | |
957 | select SERIAL_CORE | |
958 | help | |
959 | This driver supports the Zilog z85C30 serial ports found on | |
960 | PowerMac machines. | |
961 | Say Y or M if you want to be able to these serial ports. | |
962 | ||
963 | config SERIAL_PMACZILOG_CONSOLE | |
964 | bool "Console on PowerMac z85c30 serial port" | |
965 | depends on SERIAL_PMACZILOG=y | |
966 | select SERIAL_CORE_CONSOLE | |
967 | help | |
968 | If you would like to be able to use the z85c30 serial port | |
969 | on your PowerMac as the console, you can do so by answering | |
970 | Y to this option. | |
971 | ||
972 | config SERIAL_LH7A40X | |
973 | tristate "Sharp LH7A40X embedded UART support" | |
974 | depends on ARM && ARCH_LH7A40X | |
975 | select SERIAL_CORE | |
976 | help | |
977 | This enables support for the three on-board UARTs of the | |
978 | Sharp LH7A40X series CPUs. Choose Y or M. | |
979 | ||
980 | config SERIAL_LH7A40X_CONSOLE | |
981 | bool "Support for console on Sharp LH7A40X serial port" | |
982 | depends on SERIAL_LH7A40X=y | |
983 | select SERIAL_CORE_CONSOLE | |
984 | help | |
985 | Say Y here if you wish to use one of the serial ports as the | |
986 | system console--the system console is the device which | |
987 | receives all kernel messages and warnings and which allows | |
988 | logins in single user mode. | |
989 | ||
990 | Even if you say Y here, the currently visible framebuffer console | |
991 | (/dev/tty0) will still be used as the default system console, but | |
992 | you can alter that using a kernel command line, for example | |
993 | "console=ttyAM1". | |
994 | ||
995 | config SERIAL_CPM | |
996 | tristate "CPM SCC/SMC serial port support" | |
997 | depends on CPM2 || 8xx | |
998 | select SERIAL_CORE | |
999 | help | |
1000 | This driver supports the SCC and SMC serial ports on Motorola | |
1001 | embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) | |
1002 | ||
1003 | config SERIAL_CPM_CONSOLE | |
1004 | bool "Support for console on CPM SCC/SMC serial port" | |
1005 | depends on SERIAL_CPM=y | |
1006 | select SERIAL_CORE_CONSOLE | |
1007 | help | |
1008 | Say Y here if you wish to use a SCC or SMC CPM UART as the system | |
1009 | console (the system console is the device which receives all kernel | |
1010 | messages and warnings and which allows logins in single user mode). | |
1011 | ||
1012 | Even if you say Y here, the currently visible framebuffer console | |
1013 | (/dev/tty0) will still be used as the system console by default, but | |
1014 | you can alter that using a kernel command line option such as | |
1015 | "console=ttyCPM0". (Try "man bootparam" or see the documentation of | |
1016 | your boot loader (lilo or loadlin) about how to pass options to the | |
1017 | kernel at boot time.) | |
1018 | ||
1019 | config SERIAL_CPM_SCC1 | |
1020 | bool "Support for SCC1 serial port" | |
1021 | depends on SERIAL_CPM=y | |
1022 | help | |
74e8b51d | 1023 | Select this option to use SCC1 as a serial port |
1da177e4 LT |
1024 | |
1025 | config SERIAL_CPM_SCC2 | |
1026 | bool "Support for SCC2 serial port" | |
1027 | depends on SERIAL_CPM=y | |
1028 | help | |
74e8b51d | 1029 | Select this option to use SCC2 as a serial port |
1da177e4 LT |
1030 | |
1031 | config SERIAL_CPM_SCC3 | |
1032 | bool "Support for SCC3 serial port" | |
1033 | depends on SERIAL_CPM=y | |
1034 | help | |
74e8b51d | 1035 | Select this option to use SCC3 as a serial port |
1da177e4 LT |
1036 | |
1037 | config SERIAL_CPM_SCC4 | |
1038 | bool "Support for SCC4 serial port" | |
1039 | depends on SERIAL_CPM=y | |
1040 | help | |
74e8b51d | 1041 | Select this option to use SCC4 as a serial port |
1da177e4 LT |
1042 | |
1043 | config SERIAL_CPM_SMC1 | |
1044 | bool "Support for SMC1 serial port" | |
1045 | depends on SERIAL_CPM=y | |
1046 | help | |
74e8b51d | 1047 | Select this option to use SMC1 as a serial port |
1da177e4 LT |
1048 | |
1049 | config SERIAL_CPM_SMC2 | |
1050 | bool "Support for SMC2 serial port" | |
1051 | depends on SERIAL_CPM=y | |
1052 | help | |
74e8b51d | 1053 | Select this option to use SMC2 as a serial port |
1da177e4 LT |
1054 | |
1055 | config SERIAL_SGI_L1_CONSOLE | |
1056 | bool "SGI Altix L1 serial console support" | |
1057 | depends on IA64_GENERIC || IA64_SGI_SN2 | |
1058 | select SERIAL_CORE | |
1059 | select SERIAL_CORE_CONSOLE | |
1060 | help | |
1061 | If you have an SGI Altix and you would like to use the system | |
1062 | controller serial port as your console (you want this!), | |
1063 | say Y. Otherwise, say N. | |
1064 | ||
1065 | config SERIAL_MPC52xx | |
1066 | tristate "Freescale MPC52xx family PSC serial support" | |
1067 | depends on PPC_MPC52xx | |
1068 | select SERIAL_CORE | |
1069 | help | |
1070 | This drivers support the MPC52xx PSC serial ports. If you would | |
1071 | like to use them, you must answer Y or M to this option. Not that | |
1072 | for use as console, it must be included in kernel and not as a | |
1073 | module. | |
1074 | ||
1075 | config SERIAL_MPC52xx_CONSOLE | |
1076 | bool "Console on a Freescale MPC52xx family PSC serial port" | |
1077 | depends on SERIAL_MPC52xx=y | |
1078 | select SERIAL_CORE_CONSOLE | |
1079 | help | |
1080 | Select this options if you'd like to use one of the PSC serial port | |
1081 | of the Freescale MPC52xx family as a console. | |
1082 | ||
1083 | config SERIAL_MPC52xx_CONSOLE_BAUD | |
1084 | int "Freescale MPC52xx family PSC serial port baud" | |
1085 | depends on SERIAL_MPC52xx_CONSOLE=y | |
1086 | default "9600" | |
1087 | help | |
1088 | Select the MPC52xx console baud rate. | |
1089 | This value is only used if the bootloader doesn't pass in the | |
1090 | console baudrate | |
1091 | ||
1092 | config SERIAL_ICOM | |
1093 | tristate "IBM Multiport Serial Adapter" | |
145d01e4 | 1094 | depends on PCI && (PPC_ISERIES || PPC_PSERIES) |
1da177e4 | 1095 | select SERIAL_CORE |
cb2fc532 | 1096 | select FW_LOADER |
1da177e4 LT |
1097 | help |
1098 | This driver is for a family of multiport serial adapters | |
1099 | including 2 port RVX, 2 port internal modem, 4 port internal | |
1100 | modem and a split 1 port RVX and 1 port internal modem. | |
1101 | ||
1102 | This driver can also be built as a module. If so, the module | |
1103 | will be called icom. | |
1104 | ||
1105 | config SERIAL_M32R_SIO | |
1106 | bool "M32R SIO I/F" | |
1107 | depends on M32R | |
1108 | default y | |
1109 | select SERIAL_CORE | |
1110 | help | |
1111 | Say Y here if you want to use the M32R serial controller. | |
1112 | ||
1113 | config SERIAL_M32R_SIO_CONSOLE | |
1114 | bool "use SIO console" | |
1115 | depends on SERIAL_M32R_SIO=y | |
1116 | select SERIAL_CORE_CONSOLE | |
1117 | help | |
1118 | Say Y here if you want to support a serial console. | |
1119 | ||
1120 | If you use an M3T-M32700UT or an OPSPUT platform, | |
1121 | please say also y for SERIAL_M32R_PLDSIO. | |
1122 | ||
1123 | config SERIAL_M32R_PLDSIO | |
1124 | bool "M32R SIO I/F on a PLD" | |
d600b97c | 1125 | depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) |
1da177e4 LT |
1126 | default n |
1127 | help | |
1128 | Say Y here if you want to use the M32R serial controller | |
1129 | on a PLD (Programmable Logic Device). | |
1130 | ||
1131 | If you use an M3T-M32700UT or an OPSPUT platform, | |
1132 | please say Y. | |
1133 | ||
1134 | config SERIAL_TXX9 | |
1135 | bool "TMPTX39XX/49XX SIO support" | |
bef1f402 | 1136 | depends on HAS_TXX9_SERIAL |
1da177e4 LT |
1137 | select SERIAL_CORE |
1138 | default y | |
1139 | ||
1140 | config HAS_TXX9_SERIAL | |
1141 | bool | |
1142 | ||
138c5d25 AN |
1143 | config SERIAL_TXX9_NR_UARTS |
1144 | int "Maximum number of TMPTX39XX/49XX SIO ports" | |
1145 | depends on SERIAL_TXX9 | |
1146 | default "6" | |
1147 | ||
1da177e4 LT |
1148 | config SERIAL_TXX9_CONSOLE |
1149 | bool "TMPTX39XX/49XX SIO Console support" | |
1150 | depends on SERIAL_TXX9=y | |
1151 | select SERIAL_CORE_CONSOLE | |
1152 | ||
1153 | config SERIAL_TXX9_STDSERIAL | |
1154 | bool "TX39XX/49XX SIO act as standard serial" | |
1155 | depends on !SERIAL_8250 && SERIAL_TXX9 | |
1156 | ||
1157 | config SERIAL_VR41XX | |
1158 | tristate "NEC VR4100 series Serial Interface Unit support" | |
1159 | depends on CPU_VR41XX | |
1160 | select SERIAL_CORE | |
1161 | help | |
1162 | If you have a NEC VR4100 series processor and you want to use | |
1163 | Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) | |
1164 | (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. | |
1165 | ||
1166 | config SERIAL_VR41XX_CONSOLE | |
1167 | bool "Enable NEC VR4100 series Serial Interface Unit console" | |
1168 | depends on SERIAL_VR41XX | |
1169 | select SERIAL_CORE_CONSOLE | |
1170 | help | |
1171 | If you have a NEC VR4100 series processor and you want to use | |
1172 | a console on a serial port, say Y. Otherwise, say N. | |
1173 | ||
1174 | config SERIAL_JSM | |
0a577ce3 AK |
1175 | tristate "Digi International NEO PCI Support" |
1176 | depends on PCI | |
1177 | select SERIAL_CORE | |
1178 | help | |
1179 | This is a driver for Digi International's Neo series | |
1180 | of cards which provide multiple serial ports. You would need | |
1181 | something like this to connect more than two modems to your Linux | |
1182 | box, for instance in order to become a dial-in server. This driver | |
1183 | supports PCI boards only. | |
a5f1e4ed AO |
1184 | |
1185 | If you have a card like this, say Y here, otherwise say N. | |
0a577ce3 AK |
1186 | |
1187 | To compile this driver as a module, choose M here: the | |
1188 | module will be called jsm. | |
1da177e4 | 1189 | |
e5d310b3 BC |
1190 | config SERIAL_SGI_IOC4 |
1191 | tristate "SGI IOC4 controller serial support" | |
1192 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 | |
1193 | select SERIAL_CORE | |
1194 | help | |
1195 | If you have an SGI Altix with an IOC4 based Base IO card | |
1196 | and wish to use the serial ports on this card, say Y. | |
1197 | Otherwise, say N. | |
1198 | ||
2d0cfb52 PG |
1199 | config SERIAL_SGI_IOC3 |
1200 | tristate "SGI Altix IOC3 serial support" | |
1201 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 | |
1202 | select SERIAL_CORE | |
1203 | help | |
1204 | If you have an SGI Altix with an IOC3 serial card, | |
1205 | say Y or M. Otherwise, say N. | |
1206 | ||
f8441e13 SH |
1207 | config SERIAL_NETX |
1208 | bool "NetX serial port support" | |
1209 | depends on ARM && ARCH_NETX | |
1210 | select SERIAL_CORE | |
1211 | help | |
1212 | If you have a machine based on a Hilscher NetX SoC you | |
1213 | can enable its onboard serial port by enabling this option. | |
1214 | ||
1215 | To compile this driver as a module, choose M here: the | |
1216 | module will be called netx-serial. | |
1217 | ||
1218 | config SERIAL_NETX_CONSOLE | |
1219 | bool "Console on NetX serial port" | |
1220 | depends on SERIAL_NETX | |
1221 | select SERIAL_CORE_CONSOLE | |
1222 | help | |
1223 | If you have enabled the serial port on the Motorola IMX | |
1224 | CPU you can make it the console by answering Y to this option. | |
1225 | ||
8d38a5b2 AB |
1226 | config SERIAL_OF_PLATFORM |
1227 | tristate "Serial port on Open Firmware platform bus" | |
1228 | depends on PPC_OF | |
1229 | depends on SERIAL_8250 | |
1230 | help | |
1231 | If you have a PowerPC based system that has serial ports | |
1232 | on a platform specific bus, you should enable this option. | |
1233 | Currently, only 8250 compatible ports are supported, but | |
1234 | others can easily be added. | |
1235 | ||
1da177e4 | 1236 | endmenu |