]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. |
3 | * | |
4 | * FIXME According to the usermanual the status bits in the status register | |
5 | * are only updated when the peripherals access the FIFO and not when the | |
6 | * CPU access them. So since we use this bits to know when we stop writing | |
7 | * and reading, they may not be updated in-time and a race condition may | |
8 | * exists. But I haven't be able to prove this and I don't care. But if | |
9 | * any problem arises, it might worth checking. The TX/RX FIFO Stats | |
10 | * registers should be used in addition. | |
11 | * Update: Actually, they seem updated ... At least the bits we use. | |
12 | * | |
13 | * | |
14 | * Maintainer : Sylvain Munaut <tnt@246tNt.com> | |
9b9129e7 | 15 | * |
1da177e4 LT |
16 | * Some of the code has been inspired/copied from the 2.4 code written |
17 | * by Dale Farnsworth <dfarnsworth@mvista.com>. | |
9b9129e7 | 18 | * |
b9272dfd GL |
19 | * Copyright (C) 2006 Secret Lab Technologies Ltd. |
20 | * Grant Likely <grant.likely@secretlab.ca> | |
21 | * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com> | |
1da177e4 | 22 | * Copyright (C) 2003 MontaVista, Software, Inc. |
9b9129e7 | 23 | * |
1da177e4 LT |
24 | * This file is licensed under the terms of the GNU General Public License |
25 | * version 2. This program is licensed "as is" without any warranty of any | |
26 | * kind, whether express or implied. | |
27 | */ | |
9b9129e7 | 28 | |
1da177e4 LT |
29 | /* Platform device Usage : |
30 | * | |
31 | * Since PSCs can have multiple function, the correct driver for each one | |
32 | * is selected by calling mpc52xx_match_psc_function(...). The function | |
33 | * handled by this driver is "uart". | |
34 | * | |
35 | * The driver init all necessary registers to place the PSC in uart mode without | |
36 | * DCD. However, the pin multiplexing aren't changed and should be set either | |
37 | * by the bootloader or in the platform init code. | |
38 | * | |
39 | * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2, | |
d62de3aa SM |
40 | * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and |
41 | * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly | |
42 | * fpr the console code : without this 1:1 mapping, at early boot time, when we | |
c30fe7f7 | 43 | * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it |
d62de3aa | 44 | * will be mapped to. |
1da177e4 LT |
45 | */ |
46 | ||
b9272dfd GL |
47 | /* OF Platform device Usage : |
48 | * | |
49 | * This driver is only used for PSCs configured in uart mode. The device | |
50 | * tree will have a node for each PSC in uart mode w/ device_type = "serial" | |
51 | * and "mpc52xx-psc-uart" in the compatible string | |
52 | * | |
53 | * By default, PSC devices are enumerated in the order they are found. However | |
54 | * a particular PSC number can be forces by adding 'device_no = <port#>' | |
55 | * to the device node. | |
56 | * | |
57 | * The driver init all necessary registers to place the PSC in uart mode without | |
58 | * DCD. However, the pin multiplexing aren't changed and should be set either | |
59 | * by the bootloader or in the platform init code. | |
60 | */ | |
61 | ||
62 | #undef DEBUG | |
63 | ||
64 | #include <linux/device.h> | |
1da177e4 LT |
65 | #include <linux/module.h> |
66 | #include <linux/tty.h> | |
67 | #include <linux/serial.h> | |
68 | #include <linux/sysrq.h> | |
69 | #include <linux/console.h> | |
70 | ||
71 | #include <asm/delay.h> | |
72 | #include <asm/io.h> | |
73 | ||
b9272dfd GL |
74 | #if defined(CONFIG_PPC_MERGE) |
75 | #include <asm/of_platform.h> | |
76 | #else | |
77 | #include <linux/platform_device.h> | |
78 | #endif | |
79 | ||
1da177e4 LT |
80 | #include <asm/mpc52xx.h> |
81 | #include <asm/mpc52xx_psc.h> | |
82 | ||
83 | #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
84 | #define SUPPORT_SYSRQ | |
85 | #endif | |
86 | ||
87 | #include <linux/serial_core.h> | |
88 | ||
89 | ||
d62de3aa SM |
90 | /* We've been assigned a range on the "Low-density serial ports" major */ |
91 | #define SERIAL_PSC_MAJOR 204 | |
92 | #define SERIAL_PSC_MINOR 148 | |
93 | ||
1da177e4 LT |
94 | |
95 | #define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ | |
96 | ||
97 | ||
98 | static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; | |
99 | /* Rem: - We use the read_status_mask as a shadow of | |
100 | * psc->mpc52xx_psc_imr | |
101 | * - It's important that is array is all zero on start as we | |
102 | * use it to know if it's initialized or not ! If it's not sure | |
103 | * it's cleared, then a memset(...,0,...) should be added to | |
104 | * the console_init | |
105 | */ | |
b9272dfd GL |
106 | #if defined(CONFIG_PPC_MERGE) |
107 | /* lookup table for matching device nodes to index numbers */ | |
108 | static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; | |
109 | ||
110 | static void mpc52xx_uart_of_enumerate(void); | |
111 | #endif | |
1da177e4 LT |
112 | |
113 | #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) | |
114 | ||
115 | ||
116 | /* Forward declaration of the interruption handling routine */ | |
7d12e780 | 117 | static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id); |
1da177e4 LT |
118 | |
119 | ||
120 | /* Simple macro to test if a port is console or not. This one is taken | |
121 | * for serial_core.c and maybe should be moved to serial_core.h ? */ | |
122 | #ifdef CONFIG_SERIAL_CORE_CONSOLE | |
123 | #define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) | |
124 | #else | |
125 | #define uart_console(port) (0) | |
126 | #endif | |
127 | ||
b9272dfd GL |
128 | #if defined(CONFIG_PPC_MERGE) |
129 | static struct of_device_id mpc52xx_uart_of_match[] = { | |
e3aba81d | 130 | { .type = "serial", .compatible = "mpc5200-psc-uart", }, |
b9272dfd GL |
131 | {}, |
132 | }; | |
133 | #endif | |
134 | ||
1da177e4 LT |
135 | |
136 | /* ======================================================================== */ | |
137 | /* UART operations */ | |
138 | /* ======================================================================== */ | |
139 | ||
9b9129e7 | 140 | static unsigned int |
1da177e4 LT |
141 | mpc52xx_uart_tx_empty(struct uart_port *port) |
142 | { | |
143 | int status = in_be16(&PSC(port)->mpc52xx_psc_status); | |
144 | return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0; | |
145 | } | |
146 | ||
9b9129e7 | 147 | static void |
1da177e4 LT |
148 | mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) |
149 | { | |
150 | /* Not implemented */ | |
151 | } | |
152 | ||
9b9129e7 | 153 | static unsigned int |
1da177e4 LT |
154 | mpc52xx_uart_get_mctrl(struct uart_port *port) |
155 | { | |
156 | /* Not implemented */ | |
157 | return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; | |
158 | } | |
159 | ||
9b9129e7 | 160 | static void |
b129a8cc | 161 | mpc52xx_uart_stop_tx(struct uart_port *port) |
1da177e4 LT |
162 | { |
163 | /* port->lock taken by caller */ | |
164 | port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; | |
165 | out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); | |
166 | } | |
167 | ||
9b9129e7 | 168 | static void |
b129a8cc | 169 | mpc52xx_uart_start_tx(struct uart_port *port) |
1da177e4 LT |
170 | { |
171 | /* port->lock taken by caller */ | |
172 | port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; | |
173 | out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); | |
174 | } | |
175 | ||
9b9129e7 | 176 | static void |
1da177e4 LT |
177 | mpc52xx_uart_send_xchar(struct uart_port *port, char ch) |
178 | { | |
179 | unsigned long flags; | |
180 | spin_lock_irqsave(&port->lock, flags); | |
9b9129e7 | 181 | |
1da177e4 LT |
182 | port->x_char = ch; |
183 | if (ch) { | |
184 | /* Make sure tx interrupts are on */ | |
185 | /* Truly necessary ??? They should be anyway */ | |
186 | port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; | |
187 | out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); | |
188 | } | |
9b9129e7 | 189 | |
1da177e4 LT |
190 | spin_unlock_irqrestore(&port->lock, flags); |
191 | } | |
192 | ||
193 | static void | |
194 | mpc52xx_uart_stop_rx(struct uart_port *port) | |
195 | { | |
196 | /* port->lock taken by caller */ | |
197 | port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; | |
198 | out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); | |
199 | } | |
200 | ||
201 | static void | |
202 | mpc52xx_uart_enable_ms(struct uart_port *port) | |
203 | { | |
204 | /* Not implemented */ | |
205 | } | |
206 | ||
207 | static void | |
208 | mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) | |
209 | { | |
210 | unsigned long flags; | |
211 | spin_lock_irqsave(&port->lock, flags); | |
212 | ||
213 | if ( ctl == -1 ) | |
214 | out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK); | |
215 | else | |
216 | out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK); | |
9b9129e7 | 217 | |
1da177e4 LT |
218 | spin_unlock_irqrestore(&port->lock, flags); |
219 | } | |
220 | ||
221 | static int | |
222 | mpc52xx_uart_startup(struct uart_port *port) | |
223 | { | |
224 | struct mpc52xx_psc __iomem *psc = PSC(port); | |
225 | int ret; | |
226 | ||
227 | /* Request IRQ */ | |
228 | ret = request_irq(port->irq, mpc52xx_uart_int, | |
40663cc7 | 229 | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port); |
1da177e4 LT |
230 | if (ret) |
231 | return ret; | |
232 | ||
233 | /* Reset/activate the port, clear and enable interrupts */ | |
234 | out_8(&psc->command,MPC52xx_PSC_RST_RX); | |
235 | out_8(&psc->command,MPC52xx_PSC_RST_TX); | |
9b9129e7 | 236 | |
1da177e4 LT |
237 | out_be32(&psc->sicr,0); /* UART mode DCD ignored */ |
238 | ||
239 | out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */ | |
9b9129e7 | 240 | |
1da177e4 LT |
241 | out_8(&psc->rfcntl, 0x00); |
242 | out_be16(&psc->rfalarm, 0x1ff); | |
243 | out_8(&psc->tfcntl, 0x07); | |
244 | out_be16(&psc->tfalarm, 0x80); | |
245 | ||
246 | port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; | |
247 | out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); | |
9b9129e7 | 248 | |
1da177e4 LT |
249 | out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); |
250 | out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); | |
9b9129e7 | 251 | |
1da177e4 LT |
252 | return 0; |
253 | } | |
254 | ||
255 | static void | |
256 | mpc52xx_uart_shutdown(struct uart_port *port) | |
257 | { | |
258 | struct mpc52xx_psc __iomem *psc = PSC(port); | |
9b9129e7 | 259 | |
a3481197 | 260 | /* Shut down the port. Leave TX active if on a console port */ |
1da177e4 | 261 | out_8(&psc->command,MPC52xx_PSC_RST_RX); |
a3481197 GL |
262 | if (!uart_console(port)) |
263 | out_8(&psc->command,MPC52xx_PSC_RST_TX); | |
9b9129e7 GL |
264 | |
265 | port->read_status_mask = 0; | |
1da177e4 LT |
266 | out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); |
267 | ||
268 | /* Release interrupt */ | |
269 | free_irq(port->irq, port); | |
270 | } | |
271 | ||
9b9129e7 | 272 | static void |
606d099c AC |
273 | mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, |
274 | struct ktermios *old) | |
1da177e4 LT |
275 | { |
276 | struct mpc52xx_psc __iomem *psc = PSC(port); | |
277 | unsigned long flags; | |
278 | unsigned char mr1, mr2; | |
279 | unsigned short ctr; | |
280 | unsigned int j, baud, quot; | |
9b9129e7 | 281 | |
1da177e4 LT |
282 | /* Prepare what we're gonna write */ |
283 | mr1 = 0; | |
9b9129e7 | 284 | |
1da177e4 LT |
285 | switch (new->c_cflag & CSIZE) { |
286 | case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; | |
287 | break; | |
288 | case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; | |
289 | break; | |
290 | case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; | |
291 | break; | |
292 | case CS8: | |
293 | default: mr1 |= MPC52xx_PSC_MODE_8_BITS; | |
294 | } | |
295 | ||
296 | if (new->c_cflag & PARENB) { | |
297 | mr1 |= (new->c_cflag & PARODD) ? | |
298 | MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; | |
299 | } else | |
300 | mr1 |= MPC52xx_PSC_MODE_PARNONE; | |
9b9129e7 GL |
301 | |
302 | ||
1da177e4 LT |
303 | mr2 = 0; |
304 | ||
305 | if (new->c_cflag & CSTOPB) | |
306 | mr2 |= MPC52xx_PSC_MODE_TWO_STOP; | |
307 | else | |
308 | mr2 |= ((new->c_cflag & CSIZE) == CS5) ? | |
309 | MPC52xx_PSC_MODE_ONE_STOP_5_BITS : | |
310 | MPC52xx_PSC_MODE_ONE_STOP; | |
311 | ||
312 | ||
313 | baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); | |
314 | quot = uart_get_divisor(port, baud); | |
315 | ctr = quot & 0xffff; | |
9b9129e7 | 316 | |
1da177e4 LT |
317 | /* Get the lock */ |
318 | spin_lock_irqsave(&port->lock, flags); | |
319 | ||
320 | /* Update the per-port timeout */ | |
321 | uart_update_timeout(port, new->c_cflag, baud); | |
322 | ||
323 | /* Do our best to flush TX & RX, so we don't loose anything */ | |
324 | /* But we don't wait indefinitly ! */ | |
325 | j = 5000000; /* Maximum wait */ | |
326 | /* FIXME Can't receive chars since set_termios might be called at early | |
327 | * boot for the console, all stuff is not yet ready to receive at that | |
328 | * time and that just makes the kernel oops */ | |
329 | /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ | |
9b9129e7 | 330 | while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && |
1da177e4 LT |
331 | --j) |
332 | udelay(1); | |
333 | ||
334 | if (!j) | |
335 | printk( KERN_ERR "mpc52xx_uart.c: " | |
336 | "Unable to flush RX & TX fifos in-time in set_termios." | |
9b9129e7 | 337 | "Some chars may have been lost.\n" ); |
1da177e4 LT |
338 | |
339 | /* Reset the TX & RX */ | |
340 | out_8(&psc->command,MPC52xx_PSC_RST_RX); | |
341 | out_8(&psc->command,MPC52xx_PSC_RST_TX); | |
342 | ||
343 | /* Send new mode settings */ | |
344 | out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); | |
345 | out_8(&psc->mode,mr1); | |
346 | out_8(&psc->mode,mr2); | |
347 | out_8(&psc->ctur,ctr >> 8); | |
348 | out_8(&psc->ctlr,ctr & 0xff); | |
9b9129e7 | 349 | |
1da177e4 LT |
350 | /* Reenable TX & RX */ |
351 | out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); | |
352 | out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); | |
353 | ||
354 | /* We're all set, release the lock */ | |
355 | spin_unlock_irqrestore(&port->lock, flags); | |
356 | } | |
357 | ||
358 | static const char * | |
359 | mpc52xx_uart_type(struct uart_port *port) | |
360 | { | |
361 | return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL; | |
362 | } | |
363 | ||
364 | static void | |
365 | mpc52xx_uart_release_port(struct uart_port *port) | |
366 | { | |
367 | if (port->flags & UPF_IOREMAP) { /* remapped by us ? */ | |
368 | iounmap(port->membase); | |
369 | port->membase = NULL; | |
370 | } | |
371 | ||
b9272dfd | 372 | release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); |
1da177e4 LT |
373 | } |
374 | ||
375 | static int | |
376 | mpc52xx_uart_request_port(struct uart_port *port) | |
377 | { | |
be618f55 AL |
378 | int err; |
379 | ||
1da177e4 | 380 | if (port->flags & UPF_IOREMAP) /* Need to remap ? */ |
b9272dfd GL |
381 | port->membase = ioremap(port->mapbase, |
382 | sizeof(struct mpc52xx_psc)); | |
1da177e4 LT |
383 | |
384 | if (!port->membase) | |
385 | return -EINVAL; | |
386 | ||
b9272dfd | 387 | err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), |
1da177e4 | 388 | "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; |
be618f55 AL |
389 | |
390 | if (err && (port->flags & UPF_IOREMAP)) { | |
391 | iounmap(port->membase); | |
392 | port->membase = NULL; | |
393 | } | |
394 | ||
395 | return err; | |
1da177e4 LT |
396 | } |
397 | ||
398 | static void | |
399 | mpc52xx_uart_config_port(struct uart_port *port, int flags) | |
400 | { | |
401 | if ( (flags & UART_CONFIG_TYPE) && | |
402 | (mpc52xx_uart_request_port(port) == 0) ) | |
403 | port->type = PORT_MPC52xx; | |
404 | } | |
405 | ||
406 | static int | |
407 | mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) | |
408 | { | |
409 | if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx ) | |
410 | return -EINVAL; | |
411 | ||
412 | if ( (ser->irq != port->irq) || | |
413 | (ser->io_type != SERIAL_IO_MEM) || | |
9b9129e7 | 414 | (ser->baud_base != port->uartclk) || |
1da177e4 LT |
415 | (ser->iomem_base != (void*)port->mapbase) || |
416 | (ser->hub6 != 0 ) ) | |
417 | return -EINVAL; | |
418 | ||
419 | return 0; | |
420 | } | |
421 | ||
422 | ||
423 | static struct uart_ops mpc52xx_uart_ops = { | |
424 | .tx_empty = mpc52xx_uart_tx_empty, | |
425 | .set_mctrl = mpc52xx_uart_set_mctrl, | |
426 | .get_mctrl = mpc52xx_uart_get_mctrl, | |
427 | .stop_tx = mpc52xx_uart_stop_tx, | |
428 | .start_tx = mpc52xx_uart_start_tx, | |
429 | .send_xchar = mpc52xx_uart_send_xchar, | |
430 | .stop_rx = mpc52xx_uart_stop_rx, | |
431 | .enable_ms = mpc52xx_uart_enable_ms, | |
432 | .break_ctl = mpc52xx_uart_break_ctl, | |
433 | .startup = mpc52xx_uart_startup, | |
434 | .shutdown = mpc52xx_uart_shutdown, | |
435 | .set_termios = mpc52xx_uart_set_termios, | |
436 | /* .pm = mpc52xx_uart_pm, Not supported yet */ | |
437 | /* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ | |
438 | .type = mpc52xx_uart_type, | |
439 | .release_port = mpc52xx_uart_release_port, | |
440 | .request_port = mpc52xx_uart_request_port, | |
441 | .config_port = mpc52xx_uart_config_port, | |
442 | .verify_port = mpc52xx_uart_verify_port | |
443 | }; | |
444 | ||
9b9129e7 | 445 | |
1da177e4 LT |
446 | /* ======================================================================== */ |
447 | /* Interrupt handling */ | |
448 | /* ======================================================================== */ | |
9b9129e7 | 449 | |
1da177e4 | 450 | static inline int |
7d12e780 | 451 | mpc52xx_uart_int_rx_chars(struct uart_port *port) |
1da177e4 LT |
452 | { |
453 | struct tty_struct *tty = port->info->tty; | |
33f0f88f | 454 | unsigned char ch, flag; |
1da177e4 LT |
455 | unsigned short status; |
456 | ||
457 | /* While we can read, do so ! */ | |
458 | while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) & | |
459 | MPC52xx_PSC_SR_RXRDY) { | |
460 | ||
1da177e4 LT |
461 | /* Get the char */ |
462 | ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8); | |
463 | ||
464 | /* Handle sysreq char */ | |
465 | #ifdef SUPPORT_SYSRQ | |
7d12e780 | 466 | if (uart_handle_sysrq_char(port, ch)) { |
1da177e4 LT |
467 | port->sysrq = 0; |
468 | continue; | |
469 | } | |
470 | #endif | |
471 | ||
472 | /* Store it */ | |
33f0f88f AC |
473 | |
474 | flag = TTY_NORMAL; | |
1da177e4 | 475 | port->icount.rx++; |
9b9129e7 | 476 | |
1da177e4 LT |
477 | if ( status & (MPC52xx_PSC_SR_PE | |
478 | MPC52xx_PSC_SR_FE | | |
33f0f88f | 479 | MPC52xx_PSC_SR_RB) ) { |
9b9129e7 | 480 | |
1da177e4 | 481 | if (status & MPC52xx_PSC_SR_RB) { |
33f0f88f | 482 | flag = TTY_BREAK; |
1da177e4 LT |
483 | uart_handle_break(port); |
484 | } else if (status & MPC52xx_PSC_SR_PE) | |
33f0f88f | 485 | flag = TTY_PARITY; |
1da177e4 | 486 | else if (status & MPC52xx_PSC_SR_FE) |
33f0f88f | 487 | flag = TTY_FRAME; |
1da177e4 LT |
488 | |
489 | /* Clear error condition */ | |
490 | out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT); | |
491 | ||
492 | } | |
33f0f88f AC |
493 | tty_insert_flip_char(tty, ch, flag); |
494 | if (status & MPC52xx_PSC_SR_OE) { | |
495 | /* | |
496 | * Overrun is special, since it's | |
497 | * reported immediately, and doesn't | |
498 | * affect the current character | |
499 | */ | |
500 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
501 | } | |
1da177e4 LT |
502 | } |
503 | ||
504 | tty_flip_buffer_push(tty); | |
9b9129e7 | 505 | |
1da177e4 LT |
506 | return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY; |
507 | } | |
508 | ||
509 | static inline int | |
510 | mpc52xx_uart_int_tx_chars(struct uart_port *port) | |
511 | { | |
512 | struct circ_buf *xmit = &port->info->xmit; | |
513 | ||
514 | /* Process out of band chars */ | |
515 | if (port->x_char) { | |
516 | out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char); | |
517 | port->icount.tx++; | |
518 | port->x_char = 0; | |
519 | return 1; | |
520 | } | |
521 | ||
522 | /* Nothing to do ? */ | |
523 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
b129a8cc | 524 | mpc52xx_uart_stop_tx(port); |
1da177e4 LT |
525 | return 0; |
526 | } | |
527 | ||
528 | /* Send chars */ | |
529 | while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) { | |
530 | out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]); | |
531 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
532 | port->icount.tx++; | |
533 | if (uart_circ_empty(xmit)) | |
534 | break; | |
535 | } | |
536 | ||
537 | /* Wake up */ | |
538 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
539 | uart_write_wakeup(port); | |
540 | ||
541 | /* Maybe we're done after all */ | |
542 | if (uart_circ_empty(xmit)) { | |
b129a8cc | 543 | mpc52xx_uart_stop_tx(port); |
1da177e4 LT |
544 | return 0; |
545 | } | |
546 | ||
547 | return 1; | |
548 | } | |
549 | ||
9b9129e7 | 550 | static irqreturn_t |
7d12e780 | 551 | mpc52xx_uart_int(int irq, void *dev_id) |
1da177e4 | 552 | { |
c7bec5ab | 553 | struct uart_port *port = dev_id; |
1da177e4 LT |
554 | unsigned long pass = ISR_PASS_LIMIT; |
555 | unsigned int keepgoing; | |
556 | unsigned short status; | |
9b9129e7 | 557 | |
1da177e4 | 558 | spin_lock(&port->lock); |
9b9129e7 | 559 | |
1da177e4 LT |
560 | /* While we have stuff to do, we continue */ |
561 | do { | |
562 | /* If we don't find anything to do, we stop */ | |
9b9129e7 GL |
563 | keepgoing = 0; |
564 | ||
1da177e4 LT |
565 | /* Read status */ |
566 | status = in_be16(&PSC(port)->mpc52xx_psc_isr); | |
567 | status &= port->read_status_mask; | |
9b9129e7 | 568 | |
1da177e4 LT |
569 | /* Do we need to receive chars ? */ |
570 | /* For this RX interrupts must be on and some chars waiting */ | |
571 | if ( status & MPC52xx_PSC_IMR_RXRDY ) | |
7d12e780 | 572 | keepgoing |= mpc52xx_uart_int_rx_chars(port); |
1da177e4 LT |
573 | |
574 | /* Do we need to send chars ? */ | |
575 | /* For this, TX must be ready and TX interrupt enabled */ | |
576 | if ( status & MPC52xx_PSC_IMR_TXRDY ) | |
577 | keepgoing |= mpc52xx_uart_int_tx_chars(port); | |
9b9129e7 | 578 | |
1da177e4 LT |
579 | /* Limit number of iteration */ |
580 | if ( !(--pass) ) | |
581 | keepgoing = 0; | |
582 | ||
583 | } while (keepgoing); | |
9b9129e7 | 584 | |
1da177e4 | 585 | spin_unlock(&port->lock); |
9b9129e7 | 586 | |
1da177e4 LT |
587 | return IRQ_HANDLED; |
588 | } | |
589 | ||
590 | ||
591 | /* ======================================================================== */ | |
592 | /* Console ( if applicable ) */ | |
593 | /* ======================================================================== */ | |
594 | ||
595 | #ifdef CONFIG_SERIAL_MPC52xx_CONSOLE | |
596 | ||
597 | static void __init | |
598 | mpc52xx_console_get_options(struct uart_port *port, | |
599 | int *baud, int *parity, int *bits, int *flow) | |
600 | { | |
601 | struct mpc52xx_psc __iomem *psc = PSC(port); | |
602 | unsigned char mr1; | |
603 | ||
b9272dfd GL |
604 | pr_debug("mpc52xx_console_get_options(port=%p)\n", port); |
605 | ||
1da177e4 LT |
606 | /* Read the mode registers */ |
607 | out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); | |
608 | mr1 = in_8(&psc->mode); | |
9b9129e7 | 609 | |
1da177e4 | 610 | /* CT{U,L}R are write-only ! */ |
b9272dfd GL |
611 | *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; |
612 | #if !defined(CONFIG_PPC_MERGE) | |
613 | if (__res.bi_baudrate) | |
614 | *baud = __res.bi_baudrate; | |
615 | #endif | |
1da177e4 LT |
616 | |
617 | /* Parse them */ | |
618 | switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { | |
619 | case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break; | |
620 | case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break; | |
621 | case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break; | |
622 | case MPC52xx_PSC_MODE_8_BITS: | |
623 | default: *bits = 8; | |
624 | } | |
9b9129e7 | 625 | |
1da177e4 LT |
626 | if (mr1 & MPC52xx_PSC_MODE_PARNONE) |
627 | *parity = 'n'; | |
628 | else | |
629 | *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; | |
630 | } | |
631 | ||
9b9129e7 | 632 | static void |
1da177e4 LT |
633 | mpc52xx_console_write(struct console *co, const char *s, unsigned int count) |
634 | { | |
635 | struct uart_port *port = &mpc52xx_uart_ports[co->index]; | |
636 | struct mpc52xx_psc __iomem *psc = PSC(port); | |
637 | unsigned int i, j; | |
9b9129e7 | 638 | |
1da177e4 LT |
639 | /* Disable interrupts */ |
640 | out_be16(&psc->mpc52xx_psc_imr, 0); | |
641 | ||
642 | /* Wait the TX buffer to be empty */ | |
9b9129e7 GL |
643 | j = 5000000; /* Maximum wait */ |
644 | while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && | |
1da177e4 LT |
645 | --j) |
646 | udelay(1); | |
647 | ||
648 | /* Write all the chars */ | |
d358788f | 649 | for (i = 0; i < count; i++, s++) { |
1da177e4 | 650 | /* Line return handling */ |
d358788f | 651 | if (*s == '\n') |
1da177e4 | 652 | out_8(&psc->mpc52xx_psc_buffer_8, '\r'); |
9b9129e7 | 653 | |
d358788f RK |
654 | /* Send the char */ |
655 | out_8(&psc->mpc52xx_psc_buffer_8, *s); | |
656 | ||
1da177e4 | 657 | /* Wait the TX buffer to be empty */ |
9b9129e7 GL |
658 | j = 20000; /* Maximum wait */ |
659 | while (!(in_be16(&psc->mpc52xx_psc_status) & | |
1da177e4 LT |
660 | MPC52xx_PSC_SR_TXEMP) && --j) |
661 | udelay(1); | |
662 | } | |
663 | ||
664 | /* Restore interrupt state */ | |
665 | out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); | |
666 | } | |
667 | ||
b9272dfd | 668 | #if !defined(CONFIG_PPC_MERGE) |
1da177e4 LT |
669 | static int __init |
670 | mpc52xx_console_setup(struct console *co, char *options) | |
671 | { | |
672 | struct uart_port *port = &mpc52xx_uart_ports[co->index]; | |
673 | ||
674 | int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; | |
675 | int bits = 8; | |
676 | int parity = 'n'; | |
677 | int flow = 'n'; | |
678 | ||
679 | if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM) | |
680 | return -EINVAL; | |
9b9129e7 | 681 | |
1da177e4 LT |
682 | /* Basic port init. Needed since we use some uart_??? func before |
683 | * real init for early access */ | |
684 | spin_lock_init(&port->lock); | |
685 | port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ | |
686 | port->ops = &mpc52xx_uart_ops; | |
687 | port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1)); | |
688 | ||
689 | /* We ioremap ourself */ | |
690 | port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); | |
691 | if (port->membase == NULL) | |
692 | return -EINVAL; | |
693 | ||
694 | /* Setup the port parameters accoding to options */ | |
695 | if (options) | |
696 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
697 | else | |
698 | mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); | |
699 | ||
700 | return uart_set_options(port, co, baud, parity, bits, flow); | |
701 | } | |
702 | ||
b9272dfd GL |
703 | #else |
704 | ||
705 | static int __init | |
706 | mpc52xx_console_setup(struct console *co, char *options) | |
707 | { | |
708 | struct uart_port *port = &mpc52xx_uart_ports[co->index]; | |
709 | struct device_node *np = mpc52xx_uart_nodes[co->index]; | |
710 | unsigned int ipb_freq; | |
711 | struct resource res; | |
712 | int ret; | |
713 | ||
714 | int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; | |
715 | int bits = 8; | |
716 | int parity = 'n'; | |
717 | int flow = 'n'; | |
718 | ||
719 | pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", | |
720 | co, co->index, options); | |
721 | ||
722 | if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { | |
723 | pr_debug("PSC%x out of range\n", co->index); | |
724 | return -EINVAL; | |
725 | } | |
726 | ||
727 | if (!np) { | |
728 | pr_debug("PSC%x not found in device tree\n", co->index); | |
729 | return -EINVAL; | |
730 | } | |
731 | ||
732 | pr_debug("Console on ttyPSC%x is %s\n", | |
733 | co->index, mpc52xx_uart_nodes[co->index]->full_name); | |
734 | ||
735 | /* Fetch register locations */ | |
736 | if ((ret = of_address_to_resource(np, 0, &res)) != 0) { | |
737 | pr_debug("Could not get resources for PSC%x\n", co->index); | |
738 | return ret; | |
739 | } | |
740 | ||
741 | /* Search for bus-frequency property in this node or a parent */ | |
742 | if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) { | |
743 | pr_debug("Could not find IPB bus frequency!\n"); | |
744 | return -EINVAL; | |
745 | } | |
746 | ||
747 | /* Basic port init. Needed since we use some uart_??? func before | |
748 | * real init for early access */ | |
749 | spin_lock_init(&port->lock); | |
750 | port->uartclk = ipb_freq / 2; | |
751 | port->ops = &mpc52xx_uart_ops; | |
752 | port->mapbase = res.start; | |
753 | port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); | |
754 | port->irq = irq_of_parse_and_map(np, 0); | |
755 | ||
756 | if (port->membase == NULL) | |
757 | return -EINVAL; | |
758 | ||
759 | pr_debug("mpc52xx-psc uart at %lx, mapped to %p, irq=%x, freq=%i\n", | |
760 | port->mapbase, port->membase, port->irq, port->uartclk); | |
761 | ||
762 | /* Setup the port parameters accoding to options */ | |
763 | if (options) | |
764 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
765 | else | |
766 | mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); | |
767 | ||
768 | pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", | |
769 | baud, bits, parity, flow); | |
770 | ||
771 | return uart_set_options(port, co, baud, parity, bits, flow); | |
772 | } | |
773 | #endif /* defined(CONFIG_PPC_MERGE) */ | |
774 | ||
1da177e4 | 775 | |
2d8179c0 | 776 | static struct uart_driver mpc52xx_uart_driver; |
1da177e4 LT |
777 | |
778 | static struct console mpc52xx_console = { | |
d62de3aa | 779 | .name = "ttyPSC", |
1da177e4 LT |
780 | .write = mpc52xx_console_write, |
781 | .device = uart_console_device, | |
782 | .setup = mpc52xx_console_setup, | |
783 | .flags = CON_PRINTBUFFER, | |
d62de3aa | 784 | .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */ |
1da177e4 LT |
785 | .data = &mpc52xx_uart_driver, |
786 | }; | |
787 | ||
9b9129e7 GL |
788 | |
789 | static int __init | |
1da177e4 LT |
790 | mpc52xx_console_init(void) |
791 | { | |
c98750c2 | 792 | #if defined(CONFIG_PPC_MERGE) |
b9272dfd | 793 | mpc52xx_uart_of_enumerate(); |
c98750c2 | 794 | #endif |
1da177e4 LT |
795 | register_console(&mpc52xx_console); |
796 | return 0; | |
797 | } | |
798 | ||
799 | console_initcall(mpc52xx_console_init); | |
800 | ||
801 | #define MPC52xx_PSC_CONSOLE &mpc52xx_console | |
802 | #else | |
803 | #define MPC52xx_PSC_CONSOLE NULL | |
804 | #endif | |
805 | ||
806 | ||
807 | /* ======================================================================== */ | |
808 | /* UART Driver */ | |
809 | /* ======================================================================== */ | |
810 | ||
811 | static struct uart_driver mpc52xx_uart_driver = { | |
812 | .owner = THIS_MODULE, | |
813 | .driver_name = "mpc52xx_psc_uart", | |
d62de3aa | 814 | .dev_name = "ttyPSC", |
d62de3aa SM |
815 | .major = SERIAL_PSC_MAJOR, |
816 | .minor = SERIAL_PSC_MINOR, | |
1da177e4 LT |
817 | .nr = MPC52xx_PSC_MAXNUM, |
818 | .cons = MPC52xx_PSC_CONSOLE, | |
819 | }; | |
820 | ||
821 | ||
b9272dfd | 822 | #if !defined(CONFIG_PPC_MERGE) |
1da177e4 LT |
823 | /* ======================================================================== */ |
824 | /* Platform Driver */ | |
825 | /* ======================================================================== */ | |
826 | ||
827 | static int __devinit | |
3ae5eaec | 828 | mpc52xx_uart_probe(struct platform_device *dev) |
1da177e4 | 829 | { |
3ae5eaec | 830 | struct resource *res = dev->resource; |
1da177e4 LT |
831 | |
832 | struct uart_port *port = NULL; | |
833 | int i, idx, ret; | |
834 | ||
835 | /* Check validity & presence */ | |
38801e2e | 836 | idx = dev->id; |
1da177e4 LT |
837 | if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM) |
838 | return -EINVAL; | |
839 | ||
840 | if (!mpc52xx_match_psc_function(idx,"uart")) | |
841 | return -ENODEV; | |
842 | ||
843 | /* Init the port structure */ | |
844 | port = &mpc52xx_uart_ports[idx]; | |
845 | ||
1da177e4 LT |
846 | spin_lock_init(&port->lock); |
847 | port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ | |
947deee8 | 848 | port->fifosize = 512; |
1da177e4 LT |
849 | port->iotype = UPIO_MEM; |
850 | port->flags = UPF_BOOT_AUTOCONF | | |
851 | ( uart_console(port) ? 0 : UPF_IOREMAP ); | |
852 | port->line = idx; | |
853 | port->ops = &mpc52xx_uart_ops; | |
b9272dfd | 854 | port->dev = &dev->dev; |
1da177e4 LT |
855 | |
856 | /* Search for IRQ and mapbase */ | |
38801e2e | 857 | for (i=0 ; i<dev->num_resources ; i++, res++) { |
1da177e4 LT |
858 | if (res->flags & IORESOURCE_MEM) |
859 | port->mapbase = res->start; | |
860 | else if (res->flags & IORESOURCE_IRQ) | |
861 | port->irq = res->start; | |
862 | } | |
863 | if (!port->irq || !port->mapbase) | |
864 | return -EINVAL; | |
865 | ||
866 | /* Add the port to the uart sub-system */ | |
867 | ret = uart_add_one_port(&mpc52xx_uart_driver, port); | |
868 | if (!ret) | |
3ae5eaec | 869 | platform_set_drvdata(dev, (void*)port); |
1da177e4 LT |
870 | |
871 | return ret; | |
872 | } | |
873 | ||
874 | static int | |
3ae5eaec | 875 | mpc52xx_uart_remove(struct platform_device *dev) |
1da177e4 | 876 | { |
3ae5eaec | 877 | struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev); |
1da177e4 | 878 | |
3ae5eaec | 879 | platform_set_drvdata(dev, NULL); |
1da177e4 LT |
880 | |
881 | if (port) | |
882 | uart_remove_one_port(&mpc52xx_uart_driver, port); | |
883 | ||
884 | return 0; | |
885 | } | |
886 | ||
887 | #ifdef CONFIG_PM | |
888 | static int | |
3ae5eaec | 889 | mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 | 890 | { |
3ae5eaec | 891 | struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev); |
1da177e4 | 892 | |
9b9129e7 | 893 | if (port) |
1da177e4 LT |
894 | uart_suspend_port(&mpc52xx_uart_driver, port); |
895 | ||
896 | return 0; | |
897 | } | |
898 | ||
899 | static int | |
3ae5eaec | 900 | mpc52xx_uart_resume(struct platform_device *dev) |
1da177e4 | 901 | { |
3ae5eaec | 902 | struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev); |
1da177e4 | 903 | |
9480e307 | 904 | if (port) |
1da177e4 LT |
905 | uart_resume_port(&mpc52xx_uart_driver, port); |
906 | ||
907 | return 0; | |
908 | } | |
909 | #endif | |
910 | ||
b9272dfd | 911 | |
3ae5eaec | 912 | static struct platform_driver mpc52xx_uart_platform_driver = { |
1da177e4 LT |
913 | .probe = mpc52xx_uart_probe, |
914 | .remove = mpc52xx_uart_remove, | |
915 | #ifdef CONFIG_PM | |
916 | .suspend = mpc52xx_uart_suspend, | |
917 | .resume = mpc52xx_uart_resume, | |
918 | #endif | |
3ae5eaec RK |
919 | .driver = { |
920 | .name = "mpc52xx-psc", | |
921 | }, | |
1da177e4 | 922 | }; |
b9272dfd GL |
923 | #endif /* !defined(CONFIG_PPC_MERGE) */ |
924 | ||
925 | ||
926 | #if defined(CONFIG_PPC_MERGE) | |
927 | /* ======================================================================== */ | |
928 | /* OF Platform Driver */ | |
929 | /* ======================================================================== */ | |
930 | ||
931 | static int __devinit | |
932 | mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) | |
933 | { | |
934 | int idx = -1; | |
935 | unsigned int ipb_freq; | |
936 | struct uart_port *port = NULL; | |
937 | struct resource res; | |
938 | int ret; | |
939 | ||
940 | dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); | |
941 | ||
942 | /* Check validity & presence */ | |
943 | for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) | |
944 | if (mpc52xx_uart_nodes[idx] == op->node) | |
945 | break; | |
946 | if (idx >= MPC52xx_PSC_MAXNUM) | |
947 | return -EINVAL; | |
948 | pr_debug("Found %s assigned to ttyPSC%x\n", | |
949 | mpc52xx_uart_nodes[idx]->full_name, idx); | |
950 | ||
951 | /* Search for bus-frequency property in this node or a parent */ | |
952 | if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) { | |
953 | dev_dbg(&op->dev, "Could not find IPB bus frequency!\n"); | |
954 | return -EINVAL; | |
955 | } | |
956 | ||
957 | /* Init the port structure */ | |
958 | port = &mpc52xx_uart_ports[idx]; | |
959 | ||
960 | spin_lock_init(&port->lock); | |
961 | port->uartclk = ipb_freq / 2; | |
962 | port->fifosize = 512; | |
963 | port->iotype = UPIO_MEM; | |
964 | port->flags = UPF_BOOT_AUTOCONF | | |
965 | ( uart_console(port) ? 0 : UPF_IOREMAP ); | |
966 | port->line = idx; | |
967 | port->ops = &mpc52xx_uart_ops; | |
968 | port->dev = &op->dev; | |
969 | ||
970 | /* Search for IRQ and mapbase */ | |
971 | if ((ret = of_address_to_resource(op->node, 0, &res)) != 0) | |
972 | return ret; | |
973 | ||
974 | port->mapbase = res.start; | |
975 | port->irq = irq_of_parse_and_map(op->node, 0); | |
976 | ||
977 | dev_dbg(&op->dev, "mpc52xx-psc uart at %lx, irq=%x, freq=%i\n", | |
978 | port->mapbase, port->irq, port->uartclk); | |
979 | ||
980 | if ((port->irq==NO_IRQ) || !port->mapbase) { | |
981 | printk(KERN_ERR "Could not allocate resources for PSC\n"); | |
982 | return -EINVAL; | |
983 | } | |
984 | ||
985 | /* Add the port to the uart sub-system */ | |
986 | ret = uart_add_one_port(&mpc52xx_uart_driver, port); | |
987 | if (!ret) | |
988 | dev_set_drvdata(&op->dev, (void*)port); | |
989 | ||
990 | return ret; | |
991 | } | |
992 | ||
993 | static int | |
994 | mpc52xx_uart_of_remove(struct of_device *op) | |
995 | { | |
996 | struct uart_port *port = dev_get_drvdata(&op->dev); | |
997 | dev_set_drvdata(&op->dev, NULL); | |
998 | ||
fc7900bb | 999 | if (port) { |
b9272dfd | 1000 | uart_remove_one_port(&mpc52xx_uart_driver, port); |
fc7900bb SM |
1001 | irq_dispose_mapping(port->irq); |
1002 | } | |
b9272dfd GL |
1003 | |
1004 | return 0; | |
1005 | } | |
1006 | ||
1007 | #ifdef CONFIG_PM | |
1008 | static int | |
1009 | mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state) | |
1010 | { | |
1011 | struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); | |
1012 | ||
1013 | if (port) | |
1014 | uart_suspend_port(&mpc52xx_uart_driver, port); | |
1015 | ||
1016 | return 0; | |
1017 | } | |
1018 | ||
1019 | static int | |
1020 | mpc52xx_uart_of_resume(struct of_device *op) | |
1021 | { | |
1022 | struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); | |
1023 | ||
1024 | if (port) | |
1025 | uart_resume_port(&mpc52xx_uart_driver, port); | |
1026 | ||
1027 | return 0; | |
1028 | } | |
1029 | #endif | |
1030 | ||
1031 | static void | |
1032 | mpc52xx_uart_of_assign(struct device_node *np, int idx) | |
1033 | { | |
1034 | int free_idx = -1; | |
1035 | int i; | |
1036 | ||
1037 | /* Find the first free node */ | |
1038 | for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { | |
1039 | if (mpc52xx_uart_nodes[i] == NULL) { | |
1040 | free_idx = i; | |
1041 | break; | |
1042 | } | |
1043 | } | |
1044 | ||
1045 | if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM)) | |
1046 | idx = free_idx; | |
1047 | ||
1048 | if (idx < 0) | |
1049 | return; /* No free slot; abort */ | |
1050 | ||
1051 | /* If the slot is already occupied, then swap slots */ | |
1052 | if (mpc52xx_uart_nodes[idx] && (free_idx != -1)) | |
1053 | mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx]; | |
1054 | mpc52xx_uart_nodes[i] = np; | |
1055 | } | |
1056 | ||
1057 | static void | |
1058 | mpc52xx_uart_of_enumerate(void) | |
1059 | { | |
1060 | static int enum_done = 0; | |
1061 | struct device_node *np; | |
1062 | const unsigned int *devno; | |
1063 | int i; | |
1064 | ||
1065 | if (enum_done) | |
1066 | return; | |
1067 | ||
1068 | for_each_node_by_type(np, "serial") { | |
1069 | if (!of_match_node(mpc52xx_uart_of_match, np)) | |
1070 | continue; | |
1071 | ||
1072 | /* Is a particular device number requested? */ | |
40cd3a45 | 1073 | devno = of_get_property(np, "port-number", NULL); |
b9272dfd GL |
1074 | mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); |
1075 | } | |
1076 | ||
1077 | enum_done = 1; | |
1078 | ||
1079 | for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { | |
1080 | if (mpc52xx_uart_nodes[i]) | |
1081 | pr_debug("%s assigned to ttyPSC%x\n", | |
1082 | mpc52xx_uart_nodes[i]->full_name, i); | |
1083 | } | |
1084 | } | |
1085 | ||
1086 | MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); | |
1087 | ||
1088 | static struct of_platform_driver mpc52xx_uart_of_driver = { | |
1089 | .owner = THIS_MODULE, | |
1090 | .name = "mpc52xx-psc-uart", | |
1091 | .match_table = mpc52xx_uart_of_match, | |
1092 | .probe = mpc52xx_uart_of_probe, | |
1093 | .remove = mpc52xx_uart_of_remove, | |
1094 | #ifdef CONFIG_PM | |
1095 | .suspend = mpc52xx_uart_of_suspend, | |
1096 | .resume = mpc52xx_uart_of_resume, | |
1097 | #endif | |
1098 | .driver = { | |
1099 | .name = "mpc52xx-psc-uart", | |
1100 | }, | |
1101 | }; | |
1102 | #endif /* defined(CONFIG_PPC_MERGE) */ | |
1da177e4 LT |
1103 | |
1104 | ||
1105 | /* ======================================================================== */ | |
1106 | /* Module */ | |
1107 | /* ======================================================================== */ | |
1108 | ||
1109 | static int __init | |
1110 | mpc52xx_uart_init(void) | |
1111 | { | |
1112 | int ret; | |
1113 | ||
b9272dfd | 1114 | printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); |
1da177e4 | 1115 | |
b9272dfd GL |
1116 | if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) { |
1117 | printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", | |
1118 | __FILE__, ret); | |
1119 | return ret; | |
1da177e4 LT |
1120 | } |
1121 | ||
b9272dfd GL |
1122 | #if defined(CONFIG_PPC_MERGE) |
1123 | mpc52xx_uart_of_enumerate(); | |
1124 | ||
1125 | ret = of_register_platform_driver(&mpc52xx_uart_of_driver); | |
1126 | if (ret) { | |
1127 | printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", | |
1128 | __FILE__, ret); | |
1129 | uart_unregister_driver(&mpc52xx_uart_driver); | |
1130 | return ret; | |
1131 | } | |
1132 | #else | |
1133 | ret = platform_driver_register(&mpc52xx_uart_platform_driver); | |
1134 | if (ret) { | |
1135 | printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", | |
1136 | __FILE__, ret); | |
1137 | uart_unregister_driver(&mpc52xx_uart_driver); | |
1138 | return ret; | |
1139 | } | |
1140 | #endif | |
1141 | ||
1142 | return 0; | |
1da177e4 LT |
1143 | } |
1144 | ||
1145 | static void __exit | |
1146 | mpc52xx_uart_exit(void) | |
1147 | { | |
b9272dfd GL |
1148 | #if defined(CONFIG_PPC_MERGE) |
1149 | of_unregister_platform_driver(&mpc52xx_uart_of_driver); | |
1150 | #else | |
3ae5eaec | 1151 | platform_driver_unregister(&mpc52xx_uart_platform_driver); |
b9272dfd | 1152 | #endif |
1da177e4 LT |
1153 | uart_unregister_driver(&mpc52xx_uart_driver); |
1154 | } | |
1155 | ||
1156 | ||
1157 | module_init(mpc52xx_uart_init); | |
1158 | module_exit(mpc52xx_uart_exit); | |
1159 | ||
1160 | MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); | |
1161 | MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); | |
1162 | MODULE_LICENSE("GPL"); |