]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/sched.h> | |
39 | #include <linux/ptrace.h> | |
40 | #include <linux/slab.h> | |
41 | #include <linux/string.h> | |
42 | #include <linux/timer.h> | |
43 | #include <linux/serial_core.h> | |
30bac7aa | 44 | #include <linux/delay.h> |
1da177e4 LT |
45 | #include <linux/major.h> |
46 | #include <asm/io.h> | |
47 | #include <asm/system.h> | |
48 | ||
1da177e4 LT |
49 | #include <pcmcia/cs_types.h> |
50 | #include <pcmcia/cs.h> | |
51 | #include <pcmcia/cistpl.h> | |
52 | #include <pcmcia/ciscode.h> | |
53 | #include <pcmcia/ds.h> | |
54 | #include <pcmcia/cisreg.h> | |
55 | ||
56 | #include "8250.h" | |
57 | ||
58 | #ifdef PCMCIA_DEBUG | |
59 | static int pc_debug = PCMCIA_DEBUG; | |
60 | module_param(pc_debug, int, 0644); | |
61 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
62 | static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; | |
63 | #else | |
64 | #define DEBUG(n, args...) | |
65 | #endif | |
66 | ||
67 | /*====================================================================*/ | |
68 | ||
69 | /* Parameters that can be set with 'insmod' */ | |
70 | ||
71 | /* Enable the speaker? */ | |
72 | static int do_sound = 1; | |
73 | /* Skip strict UART tests? */ | |
74 | static int buggy_uart; | |
75 | ||
76 | module_param(do_sound, int, 0444); | |
77 | module_param(buggy_uart, int, 0444); | |
78 | ||
79 | /*====================================================================*/ | |
80 | ||
81 | /* Table of multi-port card ID's */ | |
82 | ||
1fbbac4b | 83 | struct serial_quirk { |
a8244b56 RK |
84 | unsigned int manfid; |
85 | unsigned int prodid; | |
1da177e4 | 86 | int multi; /* 1 = multifunction, > 1 = # ports */ |
7ef057fa | 87 | void (*wakeup)(struct pcmcia_device *); |
eee3a883 | 88 | int (*post)(struct pcmcia_device *); |
1da177e4 LT |
89 | }; |
90 | ||
eee3a883 RK |
91 | struct serial_info { |
92 | struct pcmcia_device *p_dev; | |
93 | int ndev; | |
94 | int multi; | |
95 | int slave; | |
96 | int manfid; | |
97 | int prodid; | |
98 | int c950ctrl; | |
99 | dev_node_t node[4]; | |
100 | int line[4]; | |
101 | const struct serial_quirk *quirk; | |
102 | }; | |
103 | ||
104 | struct serial_cfg_mem { | |
105 | tuple_t tuple; | |
106 | cisparse_t parse; | |
107 | u_char buf[256]; | |
108 | }; | |
109 | ||
110 | static int quirk_post_ibm(struct pcmcia_device *link) | |
111 | { | |
112 | conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; | |
113 | int last_ret, last_fn; | |
114 | ||
115 | last_ret = pcmcia_access_configuration_register(link, ®); | |
116 | if (last_ret) { | |
117 | last_fn = AccessConfigurationRegister; | |
118 | goto cs_failed; | |
119 | } | |
120 | reg.Action = CS_WRITE; | |
121 | reg.Value = reg.Value | 1; | |
122 | last_ret = pcmcia_access_configuration_register(link, ®); | |
123 | if (last_ret) { | |
124 | last_fn = AccessConfigurationRegister; | |
125 | goto cs_failed; | |
126 | } | |
127 | return 0; | |
128 | ||
129 | cs_failed: | |
130 | cs_error(link, last_fn, last_ret); | |
131 | return -ENODEV; | |
132 | } | |
133 | ||
7ef057fa RK |
134 | static void quirk_wakeup_oxsemi(struct pcmcia_device *link) |
135 | { | |
136 | struct serial_info *info = link->priv; | |
137 | ||
138 | outb(12, info->c950ctrl + 1); | |
139 | } | |
140 | ||
141 | /* request_region? oxsemi branch does no request_region too... */ | |
142 | /* | |
143 | * This sequence is needed to properly initialize MC45 attached to OXCF950. | |
144 | * I tried decreasing these msleep()s, but it worked properly (survived | |
145 | * 1000 stop/start operations) with these timeouts (or bigger). | |
146 | */ | |
147 | static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) | |
148 | { | |
149 | struct serial_info *info = link->priv; | |
150 | unsigned int ctrl = info->c950ctrl; | |
151 | ||
152 | outb(0xA, ctrl + 1); | |
153 | msleep(100); | |
154 | outb(0xE, ctrl + 1); | |
155 | msleep(300); | |
156 | outb(0xC, ctrl + 1); | |
157 | msleep(100); | |
158 | outb(0xE, ctrl + 1); | |
159 | msleep(200); | |
160 | outb(0xF, ctrl + 1); | |
161 | msleep(100); | |
162 | outb(0xE, ctrl + 1); | |
163 | msleep(100); | |
164 | outb(0xC, ctrl + 1); | |
165 | } | |
166 | ||
1fbbac4b RK |
167 | static const struct serial_quirk quirks[] = { |
168 | { | |
eee3a883 RK |
169 | .manfid = MANFID_IBM, |
170 | .prodid = ~0, | |
171 | .multi = -1, | |
172 | .post = quirk_post_ibm, | |
7ef057fa RK |
173 | }, { |
174 | .manfid = MANFID_INTEL, | |
175 | .prodid = PRODID_INTEL_DUAL_RS232, | |
176 | .multi = 2, | |
177 | }, { | |
178 | .manfid = MANFID_NATINST, | |
179 | .prodid = PRODID_NATINST_QUAD_RS232, | |
180 | .multi = 4, | |
eee3a883 | 181 | }, { |
1fbbac4b RK |
182 | .manfid = MANFID_OMEGA, |
183 | .prodid = PRODID_OMEGA_QSP_100, | |
184 | .multi = 4, | |
7ef057fa RK |
185 | }, { |
186 | .manfid = MANFID_OXSEMI, | |
187 | .prodid = ~0, | |
188 | .multi = -1, | |
189 | .wakeup = quirk_wakeup_oxsemi, | |
190 | }, { | |
191 | .manfid = MANFID_POSSIO, | |
192 | .prodid = PRODID_POSSIO_GCC, | |
193 | .multi = -1, | |
194 | .wakeup = quirk_wakeup_possio_gcc, | |
1fbbac4b RK |
195 | }, { |
196 | .manfid = MANFID_QUATECH, | |
197 | .prodid = PRODID_QUATECH_DUAL_RS232, | |
198 | .multi = 2, | |
199 | }, { | |
200 | .manfid = MANFID_QUATECH, | |
201 | .prodid = PRODID_QUATECH_DUAL_RS232_D1, | |
202 | .multi = 2, | |
203 | }, { | |
204 | .manfid = MANFID_QUATECH, | |
205 | .prodid = PRODID_QUATECH_QUAD_RS232, | |
206 | .multi = 4, | |
207 | }, { | |
208 | .manfid = MANFID_SOCKET, | |
209 | .prodid = PRODID_SOCKET_DUAL_RS232, | |
210 | .multi = 2, | |
1fbbac4b | 211 | } |
1da177e4 | 212 | }; |
1da177e4 | 213 | |
16f31113 | 214 | |
15b99ac1 | 215 | static int serial_config(struct pcmcia_device * link); |
1da177e4 | 216 | |
1da177e4 | 217 | |
1da177e4 LT |
218 | /*====================================================================== |
219 | ||
220 | After a card is removed, serial_remove() will unregister | |
221 | the serial device(s), and release the PCMCIA configuration. | |
222 | ||
223 | ======================================================================*/ | |
224 | ||
fba395ee | 225 | static void serial_remove(struct pcmcia_device *link) |
1da177e4 LT |
226 | { |
227 | struct serial_info *info = link->priv; | |
228 | int i; | |
229 | ||
1da177e4 LT |
230 | DEBUG(0, "serial_release(0x%p)\n", link); |
231 | ||
232 | /* | |
233 | * Recheck to see if the device is still configured. | |
234 | */ | |
e2d40963 DB |
235 | for (i = 0; i < info->ndev; i++) |
236 | serial8250_unregister_port(info->line[i]); | |
1da177e4 | 237 | |
e2d40963 | 238 | info->p_dev->dev_node = NULL; |
1da177e4 | 239 | |
e2d40963 DB |
240 | if (!info->slave) |
241 | pcmcia_disable_device(link); | |
1da177e4 LT |
242 | } |
243 | ||
fba395ee | 244 | static int serial_suspend(struct pcmcia_device *link) |
1da177e4 | 245 | { |
e2d40963 DB |
246 | struct serial_info *info = link->priv; |
247 | int i; | |
1da177e4 | 248 | |
e2d40963 DB |
249 | for (i = 0; i < info->ndev; i++) |
250 | serial8250_suspend_port(info->line[i]); | |
98e4c28b DB |
251 | |
252 | return 0; | |
1da177e4 LT |
253 | } |
254 | ||
fba395ee | 255 | static int serial_resume(struct pcmcia_device *link) |
1da177e4 | 256 | { |
9940ec36 | 257 | if (pcmcia_dev_present(link)) { |
1da177e4 LT |
258 | struct serial_info *info = link->priv; |
259 | int i; | |
260 | ||
1da177e4 LT |
261 | for (i = 0; i < info->ndev; i++) |
262 | serial8250_resume_port(info->line[i]); | |
7ef057fa RK |
263 | |
264 | if (info->quirk && info->quirk->wakeup) | |
265 | info->quirk->wakeup(link); | |
1da177e4 | 266 | } |
98e4c28b DB |
267 | |
268 | return 0; | |
1da177e4 LT |
269 | } |
270 | ||
271 | /*====================================================================== | |
272 | ||
273 | serial_attach() creates an "instance" of the driver, allocating | |
274 | local data structures for one device. The device is registered | |
275 | with Card Services. | |
276 | ||
277 | ======================================================================*/ | |
278 | ||
fba395ee | 279 | static int serial_probe(struct pcmcia_device *link) |
1da177e4 LT |
280 | { |
281 | struct serial_info *info; | |
1da177e4 LT |
282 | |
283 | DEBUG(0, "serial_attach()\n"); | |
284 | ||
285 | /* Create new serial device */ | |
286 | info = kmalloc(sizeof (*info), GFP_KERNEL); | |
287 | if (!info) | |
f8cfa618 | 288 | return -ENOMEM; |
1da177e4 | 289 | memset(info, 0, sizeof (*info)); |
fba395ee | 290 | info->p_dev = link; |
1da177e4 LT |
291 | link->priv = info; |
292 | ||
293 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
294 | link->io.NumPorts1 = 8; | |
295 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
296 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
297 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
298 | if (do_sound) { | |
299 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
300 | link->conf.Status = CCSR_AUDIO_ENA; | |
301 | } | |
302 | link->conf.IntType = INT_MEMORY_AND_IO; | |
303 | ||
15b99ac1 | 304 | return serial_config(link); |
1da177e4 LT |
305 | } |
306 | ||
307 | /*====================================================================== | |
308 | ||
309 | This deletes a driver "instance". The device is de-registered | |
310 | with Card Services. If it has been released, all local data | |
311 | structures are freed. Otherwise, the structures will be freed | |
312 | when the device is released. | |
313 | ||
314 | ======================================================================*/ | |
315 | ||
fba395ee | 316 | static void serial_detach(struct pcmcia_device *link) |
1da177e4 LT |
317 | { |
318 | struct serial_info *info = link->priv; | |
1da177e4 LT |
319 | |
320 | DEBUG(0, "serial_detach(0x%p)\n", link); | |
321 | ||
1da177e4 LT |
322 | /* |
323 | * Ensure any outstanding scheduled tasks are completed. | |
324 | */ | |
325 | flush_scheduled_work(); | |
326 | ||
327 | /* | |
328 | * Ensure that the ports have been released. | |
329 | */ | |
330 | serial_remove(link); | |
331 | ||
b4635811 | 332 | /* free bits */ |
1da177e4 LT |
333 | kfree(info); |
334 | } | |
335 | ||
336 | /*====================================================================*/ | |
337 | ||
fba395ee | 338 | static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, |
1da177e4 LT |
339 | kio_addr_t iobase, int irq) |
340 | { | |
341 | struct uart_port port; | |
342 | int line; | |
343 | ||
344 | memset(&port, 0, sizeof (struct uart_port)); | |
345 | port.iobase = iobase; | |
346 | port.irq = irq; | |
347 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
348 | port.uartclk = 1843200; | |
349 | port.dev = &handle_to_dev(handle); | |
350 | if (buggy_uart) | |
351 | port.flags |= UPF_BUGGY_UART; | |
352 | line = serial8250_register_port(&port); | |
353 | if (line < 0) { | |
354 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
355 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
356 | return -EINVAL; | |
357 | } | |
358 | ||
359 | info->line[info->ndev] = line; | |
360 | sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); | |
361 | info->node[info->ndev].major = TTY_MAJOR; | |
362 | info->node[info->ndev].minor = 0x40 + line; | |
363 | if (info->ndev > 0) | |
364 | info->node[info->ndev - 1].next = &info->node[info->ndev]; | |
365 | info->ndev++; | |
366 | ||
367 | return 0; | |
368 | } | |
369 | ||
370 | /*====================================================================*/ | |
371 | ||
372 | static int | |
fba395ee | 373 | first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
374 | { |
375 | int i; | |
376 | i = pcmcia_get_first_tuple(handle, tuple); | |
377 | if (i != CS_SUCCESS) | |
378 | return CS_NO_MORE_ITEMS; | |
379 | i = pcmcia_get_tuple_data(handle, tuple); | |
380 | if (i != CS_SUCCESS) | |
381 | return i; | |
382 | return pcmcia_parse_tuple(handle, tuple, parse); | |
383 | } | |
384 | ||
385 | static int | |
fba395ee | 386 | next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
387 | { |
388 | int i; | |
389 | i = pcmcia_get_next_tuple(handle, tuple); | |
390 | if (i != CS_SUCCESS) | |
391 | return CS_NO_MORE_ITEMS; | |
392 | i = pcmcia_get_tuple_data(handle, tuple); | |
393 | if (i != CS_SUCCESS) | |
394 | return i; | |
395 | return pcmcia_parse_tuple(handle, tuple, parse); | |
396 | } | |
397 | ||
398 | /*====================================================================*/ | |
399 | ||
fba395ee | 400 | static int simple_config(struct pcmcia_device *link) |
1da177e4 | 401 | { |
cb3592be AV |
402 | static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
403 | static const int size_table[2] = { 8, 16 }; | |
1da177e4 | 404 | struct serial_info *info = link->priv; |
16f31113 YR |
405 | struct serial_cfg_mem *cfg_mem; |
406 | tuple_t *tuple; | |
407 | u_char *buf; | |
408 | cisparse_t *parse; | |
409 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
410 | config_info_t config; |
411 | int i, j, try; | |
412 | int s; | |
413 | ||
16f31113 YR |
414 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
415 | if (!cfg_mem) | |
416 | return -1; | |
417 | ||
418 | tuple = &cfg_mem->tuple; | |
419 | parse = &cfg_mem->parse; | |
420 | cf = &parse->cftable_entry; | |
421 | buf = cfg_mem->buf; | |
422 | ||
1da177e4 | 423 | /* If the card is already configured, look up the port and irq */ |
fba395ee | 424 | i = pcmcia_get_configuration_info(link, &config); |
1da177e4 LT |
425 | if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { |
426 | kio_addr_t port = 0; | |
427 | if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { | |
428 | port = config.BasePort2; | |
429 | info->slave = 1; | |
430 | } else if ((info->manfid == MANFID_OSITECH) && | |
431 | (config.NumPorts1 == 0x40)) { | |
432 | port = config.BasePort1 + 0x28; | |
433 | info->slave = 1; | |
434 | } | |
16f31113 YR |
435 | if (info->slave) { |
436 | kfree(cfg_mem); | |
fba395ee | 437 | return setup_serial(link, info, port, config.AssignedIRQ); |
16f31113 | 438 | } |
1da177e4 | 439 | } |
1da177e4 LT |
440 | |
441 | /* First pass: look for a config entry that looks normal. */ | |
16f31113 YR |
442 | tuple->TupleData = (cisdata_t *) buf; |
443 | tuple->TupleOffset = 0; | |
444 | tuple->TupleDataMax = 255; | |
445 | tuple->Attributes = 0; | |
446 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
447 | /* Two tries: without IO aliases, then with aliases */ |
448 | for (s = 0; s < 2; s++) { | |
449 | for (try = 0; try < 2; try++) { | |
fba395ee | 450 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
451 | while (i != CS_NO_MORE_ITEMS) { |
452 | if (i != CS_SUCCESS) | |
453 | goto next_entry; | |
454 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
70294b46 | 455 | link->conf.Vpp = |
1da177e4 LT |
456 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
457 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && | |
458 | (cf->io.win[0].base != 0)) { | |
459 | link->conf.ConfigIndex = cf->index; | |
460 | link->io.BasePort1 = cf->io.win[0].base; | |
461 | link->io.IOAddrLines = (try == 0) ? | |
462 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 463 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
464 | if (i == CS_SUCCESS) |
465 | goto found_port; | |
466 | } | |
467 | next_entry: | |
fba395ee | 468 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
469 | } |
470 | } | |
471 | } | |
472 | /* Second pass: try to find an entry that isn't picky about | |
473 | its base address, then try to grab any standard serial port | |
474 | address, and finally try to get any free port. */ | |
fba395ee | 475 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
476 | while (i != CS_NO_MORE_ITEMS) { |
477 | if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && | |
478 | ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
479 | link->conf.ConfigIndex = cf->index; | |
480 | for (j = 0; j < 5; j++) { | |
481 | link->io.BasePort1 = base[j]; | |
482 | link->io.IOAddrLines = base[j] ? 16 : 3; | |
fba395ee | 483 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
484 | if (i == CS_SUCCESS) |
485 | goto found_port; | |
486 | } | |
487 | } | |
fba395ee | 488 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
489 | } |
490 | ||
491 | found_port: | |
492 | if (i != CS_SUCCESS) { | |
493 | printk(KERN_NOTICE | |
494 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 495 | cs_error(link, RequestIO, i); |
16f31113 | 496 | kfree(cfg_mem); |
1da177e4 LT |
497 | return -1; |
498 | } | |
499 | ||
fba395ee | 500 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 | 501 | if (i != CS_SUCCESS) { |
fba395ee | 502 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
503 | link->irq.AssignedIRQ = 0; |
504 | } | |
505 | if (info->multi && (info->manfid == MANFID_3COM)) | |
506 | link->conf.ConfigIndex &= ~(0x08); | |
fba395ee | 507 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 508 | if (i != CS_SUCCESS) { |
fba395ee | 509 | cs_error(link, RequestConfiguration, i); |
16f31113 | 510 | kfree(cfg_mem); |
1da177e4 LT |
511 | return -1; |
512 | } | |
16f31113 | 513 | kfree(cfg_mem); |
fba395ee | 514 | return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 LT |
515 | } |
516 | ||
fba395ee | 517 | static int multi_config(struct pcmcia_device * link) |
1da177e4 | 518 | { |
1da177e4 | 519 | struct serial_info *info = link->priv; |
16f31113 YR |
520 | struct serial_cfg_mem *cfg_mem; |
521 | tuple_t *tuple; | |
522 | u_char *buf; | |
523 | cisparse_t *parse; | |
524 | cistpl_cftable_entry_t *cf; | |
16f31113 YR |
525 | int i, rc, base2 = 0; |
526 | ||
527 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); | |
528 | if (!cfg_mem) | |
529 | return -1; | |
530 | tuple = &cfg_mem->tuple; | |
531 | parse = &cfg_mem->parse; | |
532 | cf = &parse->cftable_entry; | |
533 | buf = cfg_mem->buf; | |
1da177e4 | 534 | |
16f31113 YR |
535 | tuple->TupleData = (cisdata_t *) buf; |
536 | tuple->TupleOffset = 0; | |
537 | tuple->TupleDataMax = 255; | |
538 | tuple->Attributes = 0; | |
539 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
540 | |
541 | /* First, look for a generic full-sized window */ | |
542 | link->io.NumPorts1 = info->multi * 8; | |
fba395ee | 543 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
544 | while (i != CS_NO_MORE_ITEMS) { |
545 | /* The quad port cards have bad CIS's, so just look for a | |
546 | window larger than 8 ports and assume it will be right */ | |
547 | if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && | |
548 | (cf->io.win[0].len > 8)) { | |
549 | link->conf.ConfigIndex = cf->index; | |
550 | link->io.BasePort1 = cf->io.win[0].base; | |
551 | link->io.IOAddrLines = | |
552 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 553 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
554 | base2 = link->io.BasePort1 + 8; |
555 | if (i == CS_SUCCESS) | |
556 | break; | |
557 | } | |
fba395ee | 558 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
559 | } |
560 | ||
561 | /* If that didn't work, look for two windows */ | |
562 | if (i != CS_SUCCESS) { | |
563 | link->io.NumPorts1 = link->io.NumPorts2 = 8; | |
564 | info->multi = 2; | |
fba395ee | 565 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
566 | while (i != CS_NO_MORE_ITEMS) { |
567 | if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { | |
568 | link->conf.ConfigIndex = cf->index; | |
569 | link->io.BasePort1 = cf->io.win[0].base; | |
570 | link->io.BasePort2 = cf->io.win[1].base; | |
571 | link->io.IOAddrLines = | |
572 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 573 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
574 | base2 = link->io.BasePort2; |
575 | if (i == CS_SUCCESS) | |
576 | break; | |
577 | } | |
fba395ee | 578 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
579 | } |
580 | } | |
581 | ||
582 | if (i != CS_SUCCESS) { | |
fba395ee | 583 | cs_error(link, RequestIO, i); |
16f31113 YR |
584 | rc = -1; |
585 | goto free_cfg_mem; | |
1da177e4 LT |
586 | } |
587 | ||
fba395ee | 588 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 LT |
589 | if (i != CS_SUCCESS) { |
590 | printk(KERN_NOTICE | |
591 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 592 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
593 | link->irq.AssignedIRQ = 0; |
594 | } | |
595 | /* Socket Dual IO: this enables irq's for second port */ | |
596 | if (info->multi && (info->manfid == MANFID_SOCKET)) { | |
597 | link->conf.Present |= PRESENT_EXT_STATUS; | |
598 | link->conf.ExtStatus = ESR_REQ_ATTN_ENA; | |
599 | } | |
fba395ee | 600 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 601 | if (i != CS_SUCCESS) { |
fba395ee | 602 | cs_error(link, RequestConfiguration, i); |
16f31113 YR |
603 | rc = -1; |
604 | goto free_cfg_mem; | |
1da177e4 LT |
605 | } |
606 | ||
607 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
30bac7aa PV |
608 | * 8 registers are for the UART, the others are extra registers. |
609 | * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. | |
610 | */ | |
611 | if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && | |
612 | info->prodid == PRODID_POSSIO_GCC)) { | |
613 | int err; | |
614 | ||
1da177e4 | 615 | if (cf->index == 1 || cf->index == 3) { |
30bac7aa PV |
616 | err = setup_serial(link, info, base2, |
617 | link->irq.AssignedIRQ); | |
618 | base2 = link->io.BasePort1; | |
1da177e4 | 619 | } else { |
30bac7aa PV |
620 | err = setup_serial(link, info, link->io.BasePort1, |
621 | link->irq.AssignedIRQ); | |
1da177e4 | 622 | } |
30bac7aa | 623 | info->c950ctrl = base2; |
7ef057fa RK |
624 | |
625 | /* | |
626 | * FIXME: We really should wake up the port prior to | |
627 | * handing it over to the serial layer. | |
628 | */ | |
629 | if (info->quirk && info->quirk->wakeup) | |
630 | info->quirk->wakeup(link); | |
631 | ||
16f31113 YR |
632 | rc = 0; |
633 | goto free_cfg_mem; | |
1da177e4 LT |
634 | } |
635 | ||
fba395ee | 636 | setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 | 637 | /* The Nokia cards are not really multiport cards */ |
16f31113 YR |
638 | if (info->manfid == MANFID_NOKIA) { |
639 | rc = 0; | |
640 | goto free_cfg_mem; | |
641 | } | |
1da177e4 | 642 | for (i = 0; i < info->multi - 1; i++) |
fba395ee | 643 | setup_serial(link, info, base2 + (8 * i), |
16f31113 YR |
644 | link->irq.AssignedIRQ); |
645 | rc = 0; | |
646 | free_cfg_mem: | |
647 | kfree(cfg_mem); | |
648 | return rc; | |
1da177e4 LT |
649 | } |
650 | ||
651 | /*====================================================================== | |
652 | ||
653 | serial_config() is scheduled to run after a CARD_INSERTION event | |
654 | is received, to configure the PCMCIA socket, and to make the | |
655 | serial device available to the system. | |
656 | ||
657 | ======================================================================*/ | |
658 | ||
15b99ac1 | 659 | static int serial_config(struct pcmcia_device * link) |
1da177e4 | 660 | { |
1da177e4 | 661 | struct serial_info *info = link->priv; |
16f31113 YR |
662 | struct serial_cfg_mem *cfg_mem; |
663 | tuple_t *tuple; | |
664 | u_char *buf; | |
665 | cisparse_t *parse; | |
666 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
667 | int i, last_ret, last_fn; |
668 | ||
669 | DEBUG(0, "serial_config(0x%p)\n", link); | |
670 | ||
16f31113 YR |
671 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
672 | if (!cfg_mem) | |
673 | goto failed; | |
674 | ||
675 | tuple = &cfg_mem->tuple; | |
676 | parse = &cfg_mem->parse; | |
677 | cf = &parse->cftable_entry; | |
678 | buf = cfg_mem->buf; | |
679 | ||
680 | tuple->TupleData = (cisdata_t *) buf; | |
681 | tuple->TupleOffset = 0; | |
682 | tuple->TupleDataMax = 255; | |
683 | tuple->Attributes = 0; | |
1da177e4 | 684 | /* Get configuration register information */ |
16f31113 | 685 | tuple->DesiredTuple = CISTPL_CONFIG; |
fba395ee | 686 | last_ret = first_tuple(link, tuple, parse); |
1da177e4 LT |
687 | if (last_ret != CS_SUCCESS) { |
688 | last_fn = ParseTuple; | |
689 | goto cs_failed; | |
690 | } | |
16f31113 YR |
691 | link->conf.ConfigBase = parse->config.base; |
692 | link->conf.Present = parse->config.rmask[0]; | |
1da177e4 | 693 | |
1da177e4 | 694 | /* Is this a compliant multifunction card? */ |
16f31113 YR |
695 | tuple->DesiredTuple = CISTPL_LONGLINK_MFC; |
696 | tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; | |
fba395ee | 697 | info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS); |
1da177e4 LT |
698 | |
699 | /* Is this a multiport card? */ | |
16f31113 | 700 | tuple->DesiredTuple = CISTPL_MANFID; |
fba395ee | 701 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
f1fc3990 | 702 | info->manfid = parse->manfid.manf; |
43549ad7 | 703 | info->prodid = parse->manfid.card; |
a8244b56 | 704 | |
1fbbac4b | 705 | for (i = 0; i < ARRAY_SIZE(quirks); i++) |
a8244b56 RK |
706 | if ((quirks[i].manfid == ~0 || |
707 | quirks[i].manfid == info->manfid) && | |
708 | (quirks[i].prodid == ~0 || | |
709 | quirks[i].prodid == info->prodid)) { | |
1fbbac4b | 710 | info->quirk = &quirks[i]; |
1da177e4 | 711 | break; |
43549ad7 | 712 | } |
1da177e4 LT |
713 | } |
714 | ||
715 | /* Another check for dual-serial cards: look for either serial or | |
716 | multifunction cards that ask for appropriate IO port ranges */ | |
16f31113 | 717 | tuple->DesiredTuple = CISTPL_FUNCID; |
1da177e4 | 718 | if ((info->multi == 0) && |
fba395ee | 719 | ((first_tuple(link, tuple, parse) != CS_SUCCESS) || |
16f31113 YR |
720 | (parse->funcid.func == CISTPL_FUNCID_MULTI) || |
721 | (parse->funcid.func == CISTPL_FUNCID_SERIAL))) { | |
722 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 723 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
1da177e4 LT |
724 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) |
725 | info->multi = cf->io.win[0].len >> 3; | |
726 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
727 | (cf->io.win[1].len == 8)) | |
728 | info->multi = 2; | |
729 | } | |
730 | } | |
731 | ||
1fbbac4b RK |
732 | /* |
733 | * Apply any multi-port quirk. | |
734 | */ | |
735 | if (info->quirk && info->quirk->multi != -1) | |
736 | info->multi = info->quirk->multi; | |
737 | ||
1da177e4 LT |
738 | if (info->multi > 1) |
739 | multi_config(link); | |
740 | else | |
741 | simple_config(link); | |
742 | ||
743 | if (info->ndev == 0) | |
744 | goto failed; | |
745 | ||
eee3a883 RK |
746 | /* |
747 | * Apply any post-init quirk. FIXME: This should really happen | |
748 | * before we register the port, since it might already be in use. | |
749 | */ | |
750 | if (info->quirk && info->quirk->post) | |
751 | if (info->quirk->post(link)) | |
752 | goto failed; | |
1da177e4 | 753 | |
fd238232 | 754 | link->dev_node = &info->node[0]; |
16f31113 | 755 | kfree(cfg_mem); |
15b99ac1 | 756 | return 0; |
1da177e4 LT |
757 | |
758 | cs_failed: | |
fba395ee | 759 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
760 | failed: |
761 | serial_remove(link); | |
16f31113 | 762 | kfree(cfg_mem); |
15b99ac1 | 763 | return -ENODEV; |
1da177e4 LT |
764 | } |
765 | ||
325aa29f DB |
766 | static struct pcmcia_device_id serial_ids[] = { |
767 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
768 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
769 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
770 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), | |
771 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
772 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
773 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
774 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
775 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
776 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
777 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
778 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
f4d7510d JK |
779 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
780 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
781 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), |
782 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
783 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
784 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
785 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
786 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
787 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
788 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
789 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 790 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
325aa29f DB |
791 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
792 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
793 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
794 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
795 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
796 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
d277ad0e K |
797 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
798 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
799 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
800 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
801 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 802 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
325aa29f DB |
803 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
804 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
805 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
806 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
807 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
808 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
809 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
810 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
811 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
812 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
813 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
1de9cedf | 814 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), |
325aa29f DB |
815 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), |
816 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
817 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), | |
818 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), | |
819 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
820 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
821 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
822 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
823 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), | |
824 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
825 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
826 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
827 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
828 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), | |
829 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
830 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
831 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
832 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
1de9cedf | 833 | PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), |
325aa29f DB |
834 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), |
835 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
836 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
837 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
838 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
839 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
840 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
841 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), | |
d277ad0e | 842 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
325aa29f DB |
843 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
844 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
845 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
846 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
847 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
848 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), | |
849 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
850 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), | |
851 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
852 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
853 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
854 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
855 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
856 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
857 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), | |
858 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), | |
859 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), | |
860 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), | |
a42f0dc4 | 861 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
f542ff6d DB |
862 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ |
863 | PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ | |
325aa29f DB |
864 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), |
865 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), | |
866 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), | |
867 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), | |
fec21889 | 868 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), |
325aa29f DB |
869 | /* too generic */ |
870 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
871 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
872 | PCMCIA_DEVICE_FUNC_ID(2), | |
873 | PCMCIA_DEVICE_NULL, | |
874 | }; | |
875 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
876 | ||
1da177e4 LT |
877 | static struct pcmcia_driver serial_cs_driver = { |
878 | .owner = THIS_MODULE, | |
879 | .drv = { | |
880 | .name = "serial_cs", | |
881 | }, | |
f8cfa618 | 882 | .probe = serial_probe, |
cc3b4866 | 883 | .remove = serial_detach, |
325aa29f | 884 | .id_table = serial_ids, |
98e4c28b DB |
885 | .suspend = serial_suspend, |
886 | .resume = serial_resume, | |
1da177e4 LT |
887 | }; |
888 | ||
889 | static int __init init_serial_cs(void) | |
890 | { | |
891 | return pcmcia_register_driver(&serial_cs_driver); | |
892 | } | |
893 | ||
894 | static void __exit exit_serial_cs(void) | |
895 | { | |
896 | pcmcia_unregister_driver(&serial_cs_driver); | |
1da177e4 LT |
897 | } |
898 | ||
899 | module_init(init_serial_cs); | |
900 | module_exit(exit_serial_cs); | |
901 | ||
902 | MODULE_LICENSE("GPL"); |