]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/sched.h> | |
39 | #include <linux/ptrace.h> | |
40 | #include <linux/slab.h> | |
41 | #include <linux/string.h> | |
42 | #include <linux/timer.h> | |
43 | #include <linux/serial_core.h> | |
44 | #include <linux/major.h> | |
45 | #include <asm/io.h> | |
46 | #include <asm/system.h> | |
47 | ||
1da177e4 LT |
48 | #include <pcmcia/cs_types.h> |
49 | #include <pcmcia/cs.h> | |
50 | #include <pcmcia/cistpl.h> | |
51 | #include <pcmcia/ciscode.h> | |
52 | #include <pcmcia/ds.h> | |
53 | #include <pcmcia/cisreg.h> | |
54 | ||
55 | #include "8250.h" | |
56 | ||
57 | #ifdef PCMCIA_DEBUG | |
58 | static int pc_debug = PCMCIA_DEBUG; | |
59 | module_param(pc_debug, int, 0644); | |
60 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
61 | static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; | |
62 | #else | |
63 | #define DEBUG(n, args...) | |
64 | #endif | |
65 | ||
66 | /*====================================================================*/ | |
67 | ||
68 | /* Parameters that can be set with 'insmod' */ | |
69 | ||
70 | /* Enable the speaker? */ | |
71 | static int do_sound = 1; | |
72 | /* Skip strict UART tests? */ | |
73 | static int buggy_uart; | |
74 | ||
75 | module_param(do_sound, int, 0444); | |
76 | module_param(buggy_uart, int, 0444); | |
77 | ||
78 | /*====================================================================*/ | |
79 | ||
80 | /* Table of multi-port card ID's */ | |
81 | ||
82 | struct multi_id { | |
83 | u_short manfid; | |
84 | u_short prodid; | |
85 | int multi; /* 1 = multifunction, > 1 = # ports */ | |
86 | }; | |
87 | ||
cb3592be | 88 | static const struct multi_id multi_id[] = { |
1da177e4 LT |
89 | { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 }, |
90 | { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 }, | |
91 | { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 }, | |
92 | { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 }, | |
93 | { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 }, | |
94 | { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 }, | |
95 | { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 } | |
96 | }; | |
97 | #define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id)) | |
98 | ||
99 | struct serial_info { | |
100 | dev_link_t link; | |
101 | int ndev; | |
102 | int multi; | |
103 | int slave; | |
104 | int manfid; | |
105 | dev_node_t node[4]; | |
106 | int line[4]; | |
107 | }; | |
108 | ||
16f31113 YR |
109 | struct serial_cfg_mem { |
110 | tuple_t tuple; | |
111 | cisparse_t parse; | |
112 | u_char buf[256]; | |
113 | }; | |
114 | ||
115 | ||
1da177e4 LT |
116 | static void serial_config(dev_link_t * link); |
117 | static int serial_event(event_t event, int priority, | |
118 | event_callback_args_t * args); | |
119 | ||
120 | static dev_info_t dev_info = "serial_cs"; | |
121 | ||
122 | static dev_link_t *serial_attach(void); | |
cc3b4866 | 123 | static void serial_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
124 | |
125 | static dev_link_t *dev_list = NULL; | |
126 | ||
127 | /*====================================================================== | |
128 | ||
129 | After a card is removed, serial_remove() will unregister | |
130 | the serial device(s), and release the PCMCIA configuration. | |
131 | ||
132 | ======================================================================*/ | |
133 | ||
134 | static void serial_remove(dev_link_t *link) | |
135 | { | |
136 | struct serial_info *info = link->priv; | |
137 | int i; | |
138 | ||
139 | link->state &= ~DEV_PRESENT; | |
140 | ||
141 | DEBUG(0, "serial_release(0x%p)\n", link); | |
142 | ||
143 | /* | |
144 | * Recheck to see if the device is still configured. | |
145 | */ | |
146 | if (info->link.state & DEV_CONFIG) { | |
147 | for (i = 0; i < info->ndev; i++) | |
148 | serial8250_unregister_port(info->line[i]); | |
149 | ||
150 | info->link.dev = NULL; | |
151 | ||
152 | if (!info->slave) { | |
153 | pcmcia_release_configuration(info->link.handle); | |
154 | pcmcia_release_io(info->link.handle, &info->link.io); | |
155 | pcmcia_release_irq(info->link.handle, &info->link.irq); | |
156 | } | |
157 | ||
158 | info->link.state &= ~DEV_CONFIG; | |
159 | } | |
160 | } | |
161 | ||
98e4c28b | 162 | static int serial_suspend(struct pcmcia_device *dev) |
1da177e4 | 163 | { |
98e4c28b | 164 | dev_link_t *link = dev_to_instance(dev); |
1da177e4 LT |
165 | link->state |= DEV_SUSPEND; |
166 | ||
167 | if (link->state & DEV_CONFIG) { | |
168 | struct serial_info *info = link->priv; | |
169 | int i; | |
170 | ||
171 | for (i = 0; i < info->ndev; i++) | |
172 | serial8250_suspend_port(info->line[i]); | |
173 | ||
174 | if (!info->slave) | |
175 | pcmcia_release_configuration(link->handle); | |
176 | } | |
98e4c28b DB |
177 | |
178 | return 0; | |
1da177e4 LT |
179 | } |
180 | ||
98e4c28b | 181 | static int serial_resume(struct pcmcia_device *dev) |
1da177e4 | 182 | { |
98e4c28b | 183 | dev_link_t *link = dev_to_instance(dev); |
1da177e4 LT |
184 | link->state &= ~DEV_SUSPEND; |
185 | ||
186 | if (DEV_OK(link)) { | |
187 | struct serial_info *info = link->priv; | |
188 | int i; | |
189 | ||
190 | if (!info->slave) | |
191 | pcmcia_request_configuration(link->handle, &link->conf); | |
192 | ||
193 | for (i = 0; i < info->ndev; i++) | |
194 | serial8250_resume_port(info->line[i]); | |
195 | } | |
98e4c28b DB |
196 | |
197 | return 0; | |
1da177e4 LT |
198 | } |
199 | ||
200 | /*====================================================================== | |
201 | ||
202 | serial_attach() creates an "instance" of the driver, allocating | |
203 | local data structures for one device. The device is registered | |
204 | with Card Services. | |
205 | ||
206 | ======================================================================*/ | |
207 | ||
208 | static dev_link_t *serial_attach(void) | |
209 | { | |
210 | struct serial_info *info; | |
211 | client_reg_t client_reg; | |
212 | dev_link_t *link; | |
213 | int ret; | |
214 | ||
215 | DEBUG(0, "serial_attach()\n"); | |
216 | ||
217 | /* Create new serial device */ | |
218 | info = kmalloc(sizeof (*info), GFP_KERNEL); | |
219 | if (!info) | |
220 | return NULL; | |
221 | memset(info, 0, sizeof (*info)); | |
222 | link = &info->link; | |
223 | link->priv = info; | |
224 | ||
225 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
226 | link->io.NumPorts1 = 8; | |
227 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
228 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
229 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
230 | if (do_sound) { | |
231 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
232 | link->conf.Status = CCSR_AUDIO_ENA; | |
233 | } | |
234 | link->conf.IntType = INT_MEMORY_AND_IO; | |
235 | ||
236 | /* Register with Card Services */ | |
237 | link->next = dev_list; | |
238 | dev_list = link; | |
239 | client_reg.dev_info = &dev_info; | |
1da177e4 LT |
240 | client_reg.Version = 0x0210; |
241 | client_reg.event_callback_args.client_data = link; | |
242 | ret = pcmcia_register_client(&link->handle, &client_reg); | |
243 | if (ret != CS_SUCCESS) { | |
244 | cs_error(link->handle, RegisterClient, ret); | |
cc3b4866 | 245 | serial_detach(link->handle); |
1da177e4 LT |
246 | return NULL; |
247 | } | |
248 | ||
249 | return link; | |
250 | } | |
251 | ||
252 | /*====================================================================== | |
253 | ||
254 | This deletes a driver "instance". The device is de-registered | |
255 | with Card Services. If it has been released, all local data | |
256 | structures are freed. Otherwise, the structures will be freed | |
257 | when the device is released. | |
258 | ||
259 | ======================================================================*/ | |
260 | ||
cc3b4866 | 261 | static void serial_detach(struct pcmcia_device *p_dev) |
1da177e4 | 262 | { |
cc3b4866 | 263 | dev_link_t *link = dev_to_instance(p_dev); |
1da177e4 LT |
264 | struct serial_info *info = link->priv; |
265 | dev_link_t **linkp; | |
1da177e4 LT |
266 | |
267 | DEBUG(0, "serial_detach(0x%p)\n", link); | |
268 | ||
269 | /* Locate device structure */ | |
270 | for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) | |
271 | if (*linkp == link) | |
272 | break; | |
273 | if (*linkp == NULL) | |
274 | return; | |
275 | ||
276 | /* | |
277 | * Ensure any outstanding scheduled tasks are completed. | |
278 | */ | |
279 | flush_scheduled_work(); | |
280 | ||
281 | /* | |
282 | * Ensure that the ports have been released. | |
283 | */ | |
284 | serial_remove(link); | |
285 | ||
1da177e4 LT |
286 | /* Unlink device structure, free bits */ |
287 | *linkp = link->next; | |
288 | kfree(info); | |
289 | } | |
290 | ||
291 | /*====================================================================*/ | |
292 | ||
293 | static int setup_serial(client_handle_t handle, struct serial_info * info, | |
294 | kio_addr_t iobase, int irq) | |
295 | { | |
296 | struct uart_port port; | |
297 | int line; | |
298 | ||
299 | memset(&port, 0, sizeof (struct uart_port)); | |
300 | port.iobase = iobase; | |
301 | port.irq = irq; | |
302 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
303 | port.uartclk = 1843200; | |
304 | port.dev = &handle_to_dev(handle); | |
305 | if (buggy_uart) | |
306 | port.flags |= UPF_BUGGY_UART; | |
307 | line = serial8250_register_port(&port); | |
308 | if (line < 0) { | |
309 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
310 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
311 | return -EINVAL; | |
312 | } | |
313 | ||
314 | info->line[info->ndev] = line; | |
315 | sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); | |
316 | info->node[info->ndev].major = TTY_MAJOR; | |
317 | info->node[info->ndev].minor = 0x40 + line; | |
318 | if (info->ndev > 0) | |
319 | info->node[info->ndev - 1].next = &info->node[info->ndev]; | |
320 | info->ndev++; | |
321 | ||
322 | return 0; | |
323 | } | |
324 | ||
325 | /*====================================================================*/ | |
326 | ||
327 | static int | |
328 | first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) | |
329 | { | |
330 | int i; | |
331 | i = pcmcia_get_first_tuple(handle, tuple); | |
332 | if (i != CS_SUCCESS) | |
333 | return CS_NO_MORE_ITEMS; | |
334 | i = pcmcia_get_tuple_data(handle, tuple); | |
335 | if (i != CS_SUCCESS) | |
336 | return i; | |
337 | return pcmcia_parse_tuple(handle, tuple, parse); | |
338 | } | |
339 | ||
340 | static int | |
341 | next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) | |
342 | { | |
343 | int i; | |
344 | i = pcmcia_get_next_tuple(handle, tuple); | |
345 | if (i != CS_SUCCESS) | |
346 | return CS_NO_MORE_ITEMS; | |
347 | i = pcmcia_get_tuple_data(handle, tuple); | |
348 | if (i != CS_SUCCESS) | |
349 | return i; | |
350 | return pcmcia_parse_tuple(handle, tuple, parse); | |
351 | } | |
352 | ||
353 | /*====================================================================*/ | |
354 | ||
355 | static int simple_config(dev_link_t *link) | |
356 | { | |
cb3592be AV |
357 | static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
358 | static const int size_table[2] = { 8, 16 }; | |
1da177e4 LT |
359 | client_handle_t handle = link->handle; |
360 | struct serial_info *info = link->priv; | |
16f31113 YR |
361 | struct serial_cfg_mem *cfg_mem; |
362 | tuple_t *tuple; | |
363 | u_char *buf; | |
364 | cisparse_t *parse; | |
365 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
366 | config_info_t config; |
367 | int i, j, try; | |
368 | int s; | |
369 | ||
16f31113 YR |
370 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
371 | if (!cfg_mem) | |
372 | return -1; | |
373 | ||
374 | tuple = &cfg_mem->tuple; | |
375 | parse = &cfg_mem->parse; | |
376 | cf = &parse->cftable_entry; | |
377 | buf = cfg_mem->buf; | |
378 | ||
1da177e4 LT |
379 | /* If the card is already configured, look up the port and irq */ |
380 | i = pcmcia_get_configuration_info(handle, &config); | |
381 | if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { | |
382 | kio_addr_t port = 0; | |
383 | if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { | |
384 | port = config.BasePort2; | |
385 | info->slave = 1; | |
386 | } else if ((info->manfid == MANFID_OSITECH) && | |
387 | (config.NumPorts1 == 0x40)) { | |
388 | port = config.BasePort1 + 0x28; | |
389 | info->slave = 1; | |
390 | } | |
16f31113 YR |
391 | if (info->slave) { |
392 | kfree(cfg_mem); | |
1da177e4 | 393 | return setup_serial(handle, info, port, config.AssignedIRQ); |
16f31113 | 394 | } |
1da177e4 LT |
395 | } |
396 | link->conf.Vcc = config.Vcc; | |
397 | ||
398 | /* First pass: look for a config entry that looks normal. */ | |
16f31113 YR |
399 | tuple->TupleData = (cisdata_t *) buf; |
400 | tuple->TupleOffset = 0; | |
401 | tuple->TupleDataMax = 255; | |
402 | tuple->Attributes = 0; | |
403 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
404 | /* Two tries: without IO aliases, then with aliases */ |
405 | for (s = 0; s < 2; s++) { | |
406 | for (try = 0; try < 2; try++) { | |
16f31113 | 407 | i = first_tuple(handle, tuple, parse); |
1da177e4 LT |
408 | while (i != CS_NO_MORE_ITEMS) { |
409 | if (i != CS_SUCCESS) | |
410 | goto next_entry; | |
411 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
412 | link->conf.Vpp1 = link->conf.Vpp2 = | |
413 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; | |
414 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && | |
415 | (cf->io.win[0].base != 0)) { | |
416 | link->conf.ConfigIndex = cf->index; | |
417 | link->io.BasePort1 = cf->io.win[0].base; | |
418 | link->io.IOAddrLines = (try == 0) ? | |
419 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
420 | i = pcmcia_request_io(link->handle, &link->io); | |
421 | if (i == CS_SUCCESS) | |
422 | goto found_port; | |
423 | } | |
424 | next_entry: | |
16f31113 | 425 | i = next_tuple(handle, tuple, parse); |
1da177e4 LT |
426 | } |
427 | } | |
428 | } | |
429 | /* Second pass: try to find an entry that isn't picky about | |
430 | its base address, then try to grab any standard serial port | |
431 | address, and finally try to get any free port. */ | |
16f31113 | 432 | i = first_tuple(handle, tuple, parse); |
1da177e4 LT |
433 | while (i != CS_NO_MORE_ITEMS) { |
434 | if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && | |
435 | ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
436 | link->conf.ConfigIndex = cf->index; | |
437 | for (j = 0; j < 5; j++) { | |
438 | link->io.BasePort1 = base[j]; | |
439 | link->io.IOAddrLines = base[j] ? 16 : 3; | |
440 | i = pcmcia_request_io(link->handle, &link->io); | |
441 | if (i == CS_SUCCESS) | |
442 | goto found_port; | |
443 | } | |
444 | } | |
16f31113 | 445 | i = next_tuple(handle, tuple, parse); |
1da177e4 LT |
446 | } |
447 | ||
448 | found_port: | |
449 | if (i != CS_SUCCESS) { | |
450 | printk(KERN_NOTICE | |
451 | "serial_cs: no usable port range found, giving up\n"); | |
452 | cs_error(link->handle, RequestIO, i); | |
16f31113 | 453 | kfree(cfg_mem); |
1da177e4 LT |
454 | return -1; |
455 | } | |
456 | ||
457 | i = pcmcia_request_irq(link->handle, &link->irq); | |
458 | if (i != CS_SUCCESS) { | |
459 | cs_error(link->handle, RequestIRQ, i); | |
460 | link->irq.AssignedIRQ = 0; | |
461 | } | |
462 | if (info->multi && (info->manfid == MANFID_3COM)) | |
463 | link->conf.ConfigIndex &= ~(0x08); | |
464 | i = pcmcia_request_configuration(link->handle, &link->conf); | |
465 | if (i != CS_SUCCESS) { | |
466 | cs_error(link->handle, RequestConfiguration, i); | |
16f31113 | 467 | kfree(cfg_mem); |
1da177e4 LT |
468 | return -1; |
469 | } | |
16f31113 | 470 | kfree(cfg_mem); |
1da177e4 LT |
471 | return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); |
472 | } | |
473 | ||
474 | static int multi_config(dev_link_t * link) | |
475 | { | |
476 | client_handle_t handle = link->handle; | |
477 | struct serial_info *info = link->priv; | |
16f31113 YR |
478 | struct serial_cfg_mem *cfg_mem; |
479 | tuple_t *tuple; | |
480 | u_char *buf; | |
481 | cisparse_t *parse; | |
482 | cistpl_cftable_entry_t *cf; | |
1da177e4 | 483 | config_info_t config; |
16f31113 YR |
484 | int i, rc, base2 = 0; |
485 | ||
486 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); | |
487 | if (!cfg_mem) | |
488 | return -1; | |
489 | tuple = &cfg_mem->tuple; | |
490 | parse = &cfg_mem->parse; | |
491 | cf = &parse->cftable_entry; | |
492 | buf = cfg_mem->buf; | |
1da177e4 LT |
493 | |
494 | i = pcmcia_get_configuration_info(handle, &config); | |
495 | if (i != CS_SUCCESS) { | |
496 | cs_error(handle, GetConfigurationInfo, i); | |
16f31113 YR |
497 | rc = -1; |
498 | goto free_cfg_mem; | |
1da177e4 LT |
499 | } |
500 | link->conf.Vcc = config.Vcc; | |
501 | ||
16f31113 YR |
502 | tuple->TupleData = (cisdata_t *) buf; |
503 | tuple->TupleOffset = 0; | |
504 | tuple->TupleDataMax = 255; | |
505 | tuple->Attributes = 0; | |
506 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
507 | |
508 | /* First, look for a generic full-sized window */ | |
509 | link->io.NumPorts1 = info->multi * 8; | |
16f31113 | 510 | i = first_tuple(handle, tuple, parse); |
1da177e4 LT |
511 | while (i != CS_NO_MORE_ITEMS) { |
512 | /* The quad port cards have bad CIS's, so just look for a | |
513 | window larger than 8 ports and assume it will be right */ | |
514 | if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && | |
515 | (cf->io.win[0].len > 8)) { | |
516 | link->conf.ConfigIndex = cf->index; | |
517 | link->io.BasePort1 = cf->io.win[0].base; | |
518 | link->io.IOAddrLines = | |
519 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
520 | i = pcmcia_request_io(link->handle, &link->io); | |
521 | base2 = link->io.BasePort1 + 8; | |
522 | if (i == CS_SUCCESS) | |
523 | break; | |
524 | } | |
16f31113 | 525 | i = next_tuple(handle, tuple, parse); |
1da177e4 LT |
526 | } |
527 | ||
528 | /* If that didn't work, look for two windows */ | |
529 | if (i != CS_SUCCESS) { | |
530 | link->io.NumPorts1 = link->io.NumPorts2 = 8; | |
531 | info->multi = 2; | |
16f31113 | 532 | i = first_tuple(handle, tuple, parse); |
1da177e4 LT |
533 | while (i != CS_NO_MORE_ITEMS) { |
534 | if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { | |
535 | link->conf.ConfigIndex = cf->index; | |
536 | link->io.BasePort1 = cf->io.win[0].base; | |
537 | link->io.BasePort2 = cf->io.win[1].base; | |
538 | link->io.IOAddrLines = | |
539 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
540 | i = pcmcia_request_io(link->handle, &link->io); | |
541 | base2 = link->io.BasePort2; | |
542 | if (i == CS_SUCCESS) | |
543 | break; | |
544 | } | |
16f31113 | 545 | i = next_tuple(handle, tuple, parse); |
1da177e4 LT |
546 | } |
547 | } | |
548 | ||
549 | if (i != CS_SUCCESS) { | |
550 | cs_error(link->handle, RequestIO, i); | |
16f31113 YR |
551 | rc = -1; |
552 | goto free_cfg_mem; | |
1da177e4 LT |
553 | } |
554 | ||
555 | i = pcmcia_request_irq(link->handle, &link->irq); | |
556 | if (i != CS_SUCCESS) { | |
557 | printk(KERN_NOTICE | |
558 | "serial_cs: no usable port range found, giving up\n"); | |
559 | cs_error(link->handle, RequestIRQ, i); | |
560 | link->irq.AssignedIRQ = 0; | |
561 | } | |
562 | /* Socket Dual IO: this enables irq's for second port */ | |
563 | if (info->multi && (info->manfid == MANFID_SOCKET)) { | |
564 | link->conf.Present |= PRESENT_EXT_STATUS; | |
565 | link->conf.ExtStatus = ESR_REQ_ATTN_ENA; | |
566 | } | |
567 | i = pcmcia_request_configuration(link->handle, &link->conf); | |
568 | if (i != CS_SUCCESS) { | |
569 | cs_error(link->handle, RequestConfiguration, i); | |
16f31113 YR |
570 | rc = -1; |
571 | goto free_cfg_mem; | |
1da177e4 LT |
572 | } |
573 | ||
574 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
575 | 8 registers are for the UART, the others are extra registers */ | |
576 | if (info->manfid == MANFID_OXSEMI) { | |
577 | if (cf->index == 1 || cf->index == 3) { | |
578 | setup_serial(handle, info, base2, link->irq.AssignedIRQ); | |
579 | outb(12, link->io.BasePort1 + 1); | |
580 | } else { | |
581 | setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); | |
582 | outb(12, base2 + 1); | |
583 | } | |
16f31113 YR |
584 | rc = 0; |
585 | goto free_cfg_mem; | |
1da177e4 LT |
586 | } |
587 | ||
588 | setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); | |
589 | /* The Nokia cards are not really multiport cards */ | |
16f31113 YR |
590 | if (info->manfid == MANFID_NOKIA) { |
591 | rc = 0; | |
592 | goto free_cfg_mem; | |
593 | } | |
1da177e4 | 594 | for (i = 0; i < info->multi - 1; i++) |
16f31113 YR |
595 | setup_serial(handle, info, base2 + (8 * i), |
596 | link->irq.AssignedIRQ); | |
597 | rc = 0; | |
598 | free_cfg_mem: | |
599 | kfree(cfg_mem); | |
600 | return rc; | |
1da177e4 LT |
601 | } |
602 | ||
603 | /*====================================================================== | |
604 | ||
605 | serial_config() is scheduled to run after a CARD_INSERTION event | |
606 | is received, to configure the PCMCIA socket, and to make the | |
607 | serial device available to the system. | |
608 | ||
609 | ======================================================================*/ | |
610 | ||
611 | void serial_config(dev_link_t * link) | |
612 | { | |
613 | client_handle_t handle = link->handle; | |
614 | struct serial_info *info = link->priv; | |
16f31113 YR |
615 | struct serial_cfg_mem *cfg_mem; |
616 | tuple_t *tuple; | |
617 | u_char *buf; | |
618 | cisparse_t *parse; | |
619 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
620 | int i, last_ret, last_fn; |
621 | ||
622 | DEBUG(0, "serial_config(0x%p)\n", link); | |
623 | ||
16f31113 YR |
624 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
625 | if (!cfg_mem) | |
626 | goto failed; | |
627 | ||
628 | tuple = &cfg_mem->tuple; | |
629 | parse = &cfg_mem->parse; | |
630 | cf = &parse->cftable_entry; | |
631 | buf = cfg_mem->buf; | |
632 | ||
633 | tuple->TupleData = (cisdata_t *) buf; | |
634 | tuple->TupleOffset = 0; | |
635 | tuple->TupleDataMax = 255; | |
636 | tuple->Attributes = 0; | |
1da177e4 | 637 | /* Get configuration register information */ |
16f31113 YR |
638 | tuple->DesiredTuple = CISTPL_CONFIG; |
639 | last_ret = first_tuple(handle, tuple, parse); | |
1da177e4 LT |
640 | if (last_ret != CS_SUCCESS) { |
641 | last_fn = ParseTuple; | |
642 | goto cs_failed; | |
643 | } | |
16f31113 YR |
644 | link->conf.ConfigBase = parse->config.base; |
645 | link->conf.Present = parse->config.rmask[0]; | |
1da177e4 LT |
646 | |
647 | /* Configure card */ | |
648 | link->state |= DEV_CONFIG; | |
649 | ||
650 | /* Is this a compliant multifunction card? */ | |
16f31113 YR |
651 | tuple->DesiredTuple = CISTPL_LONGLINK_MFC; |
652 | tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; | |
653 | info->multi = (first_tuple(handle, tuple, parse) == CS_SUCCESS); | |
1da177e4 LT |
654 | |
655 | /* Is this a multiport card? */ | |
16f31113 YR |
656 | tuple->DesiredTuple = CISTPL_MANFID; |
657 | if (first_tuple(handle, tuple, parse) == CS_SUCCESS) { | |
f1fc3990 | 658 | info->manfid = parse->manfid.manf; |
1da177e4 LT |
659 | for (i = 0; i < MULTI_COUNT; i++) |
660 | if ((info->manfid == multi_id[i].manfid) && | |
f1fc3990 | 661 | (parse->manfid.card == multi_id[i].prodid)) |
1da177e4 LT |
662 | break; |
663 | if (i < MULTI_COUNT) | |
664 | info->multi = multi_id[i].multi; | |
665 | } | |
666 | ||
667 | /* Another check for dual-serial cards: look for either serial or | |
668 | multifunction cards that ask for appropriate IO port ranges */ | |
16f31113 | 669 | tuple->DesiredTuple = CISTPL_FUNCID; |
1da177e4 | 670 | if ((info->multi == 0) && |
16f31113 YR |
671 | ((first_tuple(handle, tuple, parse) != CS_SUCCESS) || |
672 | (parse->funcid.func == CISTPL_FUNCID_MULTI) || | |
673 | (parse->funcid.func == CISTPL_FUNCID_SERIAL))) { | |
674 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
675 | if (first_tuple(handle, tuple, parse) == CS_SUCCESS) { | |
1da177e4 LT |
676 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) |
677 | info->multi = cf->io.win[0].len >> 3; | |
678 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
679 | (cf->io.win[1].len == 8)) | |
680 | info->multi = 2; | |
681 | } | |
682 | } | |
683 | ||
684 | if (info->multi > 1) | |
685 | multi_config(link); | |
686 | else | |
687 | simple_config(link); | |
688 | ||
689 | if (info->ndev == 0) | |
690 | goto failed; | |
691 | ||
692 | if (info->manfid == MANFID_IBM) { | |
693 | conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; | |
694 | last_ret = pcmcia_access_configuration_register(link->handle, ®); | |
695 | if (last_ret) { | |
696 | last_fn = AccessConfigurationRegister; | |
697 | goto cs_failed; | |
698 | } | |
699 | reg.Action = CS_WRITE; | |
700 | reg.Value = reg.Value | 1; | |
701 | last_ret = pcmcia_access_configuration_register(link->handle, ®); | |
702 | if (last_ret) { | |
703 | last_fn = AccessConfigurationRegister; | |
704 | goto cs_failed; | |
705 | } | |
706 | } | |
707 | ||
708 | link->dev = &info->node[0]; | |
709 | link->state &= ~DEV_CONFIG_PENDING; | |
16f31113 | 710 | kfree(cfg_mem); |
1da177e4 LT |
711 | return; |
712 | ||
713 | cs_failed: | |
714 | cs_error(link->handle, last_fn, last_ret); | |
715 | failed: | |
716 | serial_remove(link); | |
717 | link->state &= ~DEV_CONFIG_PENDING; | |
16f31113 | 718 | kfree(cfg_mem); |
1da177e4 LT |
719 | } |
720 | ||
721 | /*====================================================================== | |
722 | ||
723 | The card status event handler. Mostly, this schedules other | |
724 | stuff to run after an event is received. A CARD_REMOVAL event | |
725 | also sets some flags to discourage the serial drivers from | |
726 | talking to the ports. | |
727 | ||
728 | ======================================================================*/ | |
729 | ||
730 | static int | |
731 | serial_event(event_t event, int priority, event_callback_args_t * args) | |
732 | { | |
733 | dev_link_t *link = args->client_data; | |
1da177e4 LT |
734 | |
735 | DEBUG(1, "serial_event(0x%06x)\n", event); | |
736 | ||
737 | switch (event) { | |
1da177e4 LT |
738 | |
739 | case CS_EVENT_CARD_INSERTION: | |
740 | link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; | |
741 | serial_config(link); | |
742 | break; | |
1da177e4 LT |
743 | } |
744 | return 0; | |
745 | } | |
746 | ||
325aa29f DB |
747 | static struct pcmcia_device_id serial_ids[] = { |
748 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
749 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
750 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
751 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), | |
752 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
753 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
754 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
755 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
756 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
757 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
758 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
759 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
f4d7510d JK |
760 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
761 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
762 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), |
763 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
764 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
765 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
766 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
767 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
768 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
769 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
770 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 771 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
325aa29f DB |
772 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
773 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
774 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
775 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
776 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
777 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
d277ad0e K |
778 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
779 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
780 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
781 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
782 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 783 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
325aa29f DB |
784 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
785 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
786 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
787 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
788 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
789 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
790 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
791 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
792 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
793 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
794 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
795 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), | |
796 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
797 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), | |
798 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), | |
799 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
800 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
801 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
802 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
803 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), | |
804 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
805 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
806 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
807 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
808 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), | |
809 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
810 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
811 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
812 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
813 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), | |
814 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
815 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
816 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
817 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
818 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
819 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
820 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), | |
d277ad0e | 821 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
325aa29f DB |
822 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
823 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
824 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
825 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
826 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
827 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), | |
828 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
829 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), | |
830 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
831 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
832 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
833 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
834 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
835 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
836 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), | |
837 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), | |
838 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), | |
839 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), | |
a42f0dc4 | 840 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
325aa29f DB |
841 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), |
842 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), | |
843 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), | |
844 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), | |
845 | /* too generic */ | |
846 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
847 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
848 | PCMCIA_DEVICE_FUNC_ID(2), | |
849 | PCMCIA_DEVICE_NULL, | |
850 | }; | |
851 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
852 | ||
1da177e4 LT |
853 | static struct pcmcia_driver serial_cs_driver = { |
854 | .owner = THIS_MODULE, | |
855 | .drv = { | |
856 | .name = "serial_cs", | |
857 | }, | |
858 | .attach = serial_attach, | |
1e212f36 | 859 | .event = serial_event, |
cc3b4866 | 860 | .remove = serial_detach, |
325aa29f | 861 | .id_table = serial_ids, |
98e4c28b DB |
862 | .suspend = serial_suspend, |
863 | .resume = serial_resume, | |
1da177e4 LT |
864 | }; |
865 | ||
866 | static int __init init_serial_cs(void) | |
867 | { | |
868 | return pcmcia_register_driver(&serial_cs_driver); | |
869 | } | |
870 | ||
871 | static void __exit exit_serial_cs(void) | |
872 | { | |
873 | pcmcia_unregister_driver(&serial_cs_driver); | |
874 | BUG_ON(dev_list != NULL); | |
875 | } | |
876 | ||
877 | module_init(init_serial_cs); | |
878 | module_exit(exit_serial_cs); | |
879 | ||
880 | MODULE_LICENSE("GPL"); |