]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. |
2 | * | |
3 | * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) | |
c4d37215 | 4 | * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) |
1da177e4 LT |
5 | * |
6 | * Rewrote buffer handling to use CIRC(Circular Buffer) macros. | |
7 | * Maxim Krasnyanskiy <maxk@qualcomm.com> | |
8 | * | |
9 | * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud | |
10 | * rates to be programmed into the UART. Also eliminated a lot of | |
11 | * duplicated code in the console setup. | |
12 | * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 | |
13 | * | |
14 | * Ported to new 2.5.x UART layer. | |
c4d37215 | 15 | * David S. Miller <davem@davemloft.net> |
1da177e4 LT |
16 | */ |
17 | ||
1da177e4 LT |
18 | #include <linux/module.h> |
19 | #include <linux/kernel.h> | |
20 | #include <linux/sched.h> | |
21 | #include <linux/errno.h> | |
22 | #include <linux/tty.h> | |
23 | #include <linux/tty_flip.h> | |
24 | #include <linux/major.h> | |
25 | #include <linux/string.h> | |
26 | #include <linux/ptrace.h> | |
27 | #include <linux/ioport.h> | |
28 | #include <linux/circ_buf.h> | |
29 | #include <linux/serial.h> | |
30 | #include <linux/sysrq.h> | |
31 | #include <linux/console.h> | |
32 | #include <linux/spinlock.h> | |
33 | #include <linux/slab.h> | |
34 | #include <linux/delay.h> | |
35 | #include <linux/init.h> | |
36 | ||
37 | #include <asm/io.h> | |
38 | #include <asm/irq.h> | |
c4d37215 DM |
39 | #include <asm/prom.h> |
40 | #include <asm/of_device.h> | |
1da177e4 LT |
41 | |
42 | #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
43 | #define SUPPORT_SYSRQ | |
44 | #endif | |
45 | ||
46 | #include <linux/serial_core.h> | |
47 | ||
48 | #include "suncore.h" | |
49 | #include "sunsab.h" | |
50 | ||
51 | struct uart_sunsab_port { | |
52 | struct uart_port port; /* Generic UART port */ | |
53 | union sab82532_async_regs __iomem *regs; /* Chip registers */ | |
54 | unsigned long irqflags; /* IRQ state flags */ | |
55 | int dsr; /* Current DSR state */ | |
56 | unsigned int cec_timeout; /* Chip poll timeout... */ | |
57 | unsigned int tec_timeout; /* likewise */ | |
58 | unsigned char interrupt_mask0;/* ISR0 masking */ | |
59 | unsigned char interrupt_mask1;/* ISR1 masking */ | |
60 | unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ | |
61 | unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ | |
62 | int type; /* SAB82532 version */ | |
e4fdee8e DM |
63 | |
64 | /* Setting configuration bits while the transmitter is active | |
65 | * can cause garbage characters to get emitted by the chip. | |
66 | * Therefore, we cache such writes here and do the real register | |
67 | * write the next time the transmitter becomes idle. | |
68 | */ | |
69 | unsigned int cached_ebrg; | |
70 | unsigned char cached_mode; | |
71 | unsigned char cached_pvr; | |
72 | unsigned char cached_dafo; | |
1da177e4 LT |
73 | }; |
74 | ||
75 | /* | |
76 | * This assumes you have a 29.4912 MHz clock for your UART. | |
77 | */ | |
78 | #define SAB_BASE_BAUD ( 29491200 / 16 ) | |
79 | ||
80 | static char *sab82532_version[16] = { | |
81 | "V1.0", "V2.0", "V3.2", "V(0x03)", | |
82 | "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", | |
83 | "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", | |
84 | "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" | |
85 | }; | |
86 | ||
87 | #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ | |
88 | #define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ | |
89 | ||
90 | #define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ | |
91 | #define SAB82532_XMIT_FIFO_SIZE 32 | |
92 | ||
93 | static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) | |
94 | { | |
95 | int timeout = up->tec_timeout; | |
96 | ||
97 | while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) | |
98 | udelay(1); | |
99 | } | |
100 | ||
101 | static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) | |
102 | { | |
103 | int timeout = up->cec_timeout; | |
104 | ||
105 | while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) | |
106 | udelay(1); | |
107 | } | |
108 | ||
109 | static struct tty_struct * | |
110 | receive_chars(struct uart_sunsab_port *up, | |
111 | union sab82532_irq_status *stat, | |
112 | struct pt_regs *regs) | |
113 | { | |
114 | struct tty_struct *tty = NULL; | |
115 | unsigned char buf[32]; | |
116 | int saw_console_brk = 0; | |
117 | int free_fifo = 0; | |
118 | int count = 0; | |
119 | int i; | |
120 | ||
121 | if (up->port.info != NULL) /* Unopened serial console */ | |
122 | tty = up->port.info->tty; | |
123 | ||
124 | /* Read number of BYTES (Character + Status) available. */ | |
125 | if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { | |
126 | count = SAB82532_RECV_FIFO_SIZE; | |
127 | free_fifo++; | |
128 | } | |
129 | ||
130 | if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { | |
131 | count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); | |
132 | free_fifo++; | |
133 | } | |
134 | ||
135 | /* Issue a FIFO read command in case we where idle. */ | |
136 | if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { | |
137 | sunsab_cec_wait(up); | |
138 | writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); | |
139 | return tty; | |
140 | } | |
141 | ||
142 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
143 | free_fifo++; | |
144 | ||
145 | /* Read the FIFO. */ | |
146 | for (i = 0; i < count; i++) | |
147 | buf[i] = readb(&up->regs->r.rfifo[i]); | |
148 | ||
149 | /* Issue Receive Message Complete command. */ | |
150 | if (free_fifo) { | |
151 | sunsab_cec_wait(up); | |
152 | writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); | |
153 | } | |
154 | ||
155 | /* Count may be zero for BRK, so we check for it here */ | |
156 | if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && | |
157 | (up->port.line == up->port.cons->index)) | |
158 | saw_console_brk = 1; | |
159 | ||
160 | for (i = 0; i < count; i++) { | |
33f0f88f | 161 | unsigned char ch = buf[i], flag; |
1da177e4 LT |
162 | |
163 | if (tty == NULL) { | |
164 | uart_handle_sysrq_char(&up->port, ch, regs); | |
165 | continue; | |
166 | } | |
167 | ||
33f0f88f | 168 | flag = TTY_NORMAL; |
1da177e4 LT |
169 | up->port.icount.rx++; |
170 | ||
171 | if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | | |
172 | SAB82532_ISR0_FERR | | |
173 | SAB82532_ISR0_RFO)) || | |
174 | unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { | |
175 | /* | |
176 | * For statistics only | |
177 | */ | |
178 | if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { | |
179 | stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | | |
180 | SAB82532_ISR0_FERR); | |
181 | up->port.icount.brk++; | |
182 | /* | |
183 | * We do the SysRQ and SAK checking | |
184 | * here because otherwise the break | |
185 | * may get masked by ignore_status_mask | |
186 | * or read_status_mask. | |
187 | */ | |
188 | if (uart_handle_break(&up->port)) | |
189 | continue; | |
190 | } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) | |
191 | up->port.icount.parity++; | |
192 | else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) | |
193 | up->port.icount.frame++; | |
194 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
195 | up->port.icount.overrun++; | |
196 | ||
197 | /* | |
198 | * Mask off conditions which should be ingored. | |
199 | */ | |
200 | stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); | |
201 | stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); | |
202 | ||
203 | if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { | |
33f0f88f | 204 | flag = TTY_BREAK; |
1da177e4 | 205 | } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) |
33f0f88f | 206 | flag = TTY_PARITY; |
1da177e4 | 207 | else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) |
33f0f88f | 208 | flag = TTY_FRAME; |
1da177e4 LT |
209 | } |
210 | ||
211 | if (uart_handle_sysrq_char(&up->port, ch, regs)) | |
212 | continue; | |
213 | ||
214 | if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && | |
33f0f88f AC |
215 | (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) |
216 | tty_insert_flip_char(tty, ch, flag); | |
217 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
218 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
1da177e4 LT |
219 | } |
220 | ||
221 | if (saw_console_brk) | |
222 | sun_do_break(); | |
223 | ||
224 | return tty; | |
225 | } | |
226 | ||
b129a8cc | 227 | static void sunsab_stop_tx(struct uart_port *); |
e4fdee8e | 228 | static void sunsab_tx_idle(struct uart_sunsab_port *); |
1da177e4 LT |
229 | |
230 | static void transmit_chars(struct uart_sunsab_port *up, | |
231 | union sab82532_irq_status *stat) | |
232 | { | |
233 | struct circ_buf *xmit = &up->port.info->xmit; | |
234 | int i; | |
235 | ||
236 | if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { | |
237 | up->interrupt_mask1 |= SAB82532_IMR1_ALLS; | |
238 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
239 | set_bit(SAB82532_ALLS, &up->irqflags); | |
240 | } | |
241 | ||
242 | #if 0 /* bde@nwlink.com says this check causes problems */ | |
243 | if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) | |
244 | return; | |
245 | #endif | |
246 | ||
247 | if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) | |
248 | return; | |
249 | ||
250 | set_bit(SAB82532_XPR, &up->irqflags); | |
e4fdee8e | 251 | sunsab_tx_idle(up); |
1da177e4 LT |
252 | |
253 | if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { | |
254 | up->interrupt_mask1 |= SAB82532_IMR1_XPR; | |
255 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
1da177e4 LT |
256 | return; |
257 | } | |
258 | ||
259 | up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); | |
260 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
261 | clear_bit(SAB82532_ALLS, &up->irqflags); | |
262 | ||
263 | /* Stuff 32 bytes into Transmit FIFO. */ | |
264 | clear_bit(SAB82532_XPR, &up->irqflags); | |
265 | for (i = 0; i < up->port.fifosize; i++) { | |
266 | writeb(xmit->buf[xmit->tail], | |
267 | &up->regs->w.xfifo[i]); | |
268 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
269 | up->port.icount.tx++; | |
270 | if (uart_circ_empty(xmit)) | |
271 | break; | |
272 | } | |
273 | ||
274 | /* Issue a Transmit Frame command. */ | |
275 | sunsab_cec_wait(up); | |
276 | writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); | |
277 | ||
278 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
279 | uart_write_wakeup(&up->port); | |
280 | ||
281 | if (uart_circ_empty(xmit)) | |
b129a8cc | 282 | sunsab_stop_tx(&up->port); |
1da177e4 LT |
283 | } |
284 | ||
285 | static void check_status(struct uart_sunsab_port *up, | |
286 | union sab82532_irq_status *stat) | |
287 | { | |
288 | if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) | |
289 | uart_handle_dcd_change(&up->port, | |
290 | !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); | |
291 | ||
292 | if (stat->sreg.isr1 & SAB82532_ISR1_CSC) | |
293 | uart_handle_cts_change(&up->port, | |
294 | (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); | |
295 | ||
296 | if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { | |
297 | up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; | |
298 | up->port.icount.dsr++; | |
299 | } | |
300 | ||
301 | wake_up_interruptible(&up->port.info->delta_msr_wait); | |
302 | } | |
303 | ||
304 | static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs) | |
305 | { | |
306 | struct uart_sunsab_port *up = dev_id; | |
307 | struct tty_struct *tty; | |
308 | union sab82532_irq_status status; | |
309 | unsigned long flags; | |
310 | ||
311 | spin_lock_irqsave(&up->port.lock, flags); | |
312 | ||
313 | status.stat = 0; | |
314 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0) | |
315 | status.sreg.isr0 = readb(&up->regs->r.isr0); | |
316 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1) | |
317 | status.sreg.isr1 = readb(&up->regs->r.isr1); | |
318 | ||
319 | tty = NULL; | |
320 | if (status.stat) { | |
321 | if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
322 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || | |
323 | (status.sreg.isr1 & SAB82532_ISR1_BRK)) | |
324 | tty = receive_chars(up, &status, regs); | |
325 | if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || | |
326 | (status.sreg.isr1 & SAB82532_ISR1_CSC)) | |
327 | check_status(up, &status); | |
328 | if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) | |
329 | transmit_chars(up, &status); | |
330 | } | |
331 | ||
332 | spin_unlock(&up->port.lock); | |
333 | ||
334 | if (tty) | |
335 | tty_flip_buffer_push(tty); | |
336 | ||
337 | up++; | |
338 | ||
339 | spin_lock(&up->port.lock); | |
340 | ||
341 | status.stat = 0; | |
342 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0) | |
343 | status.sreg.isr0 = readb(&up->regs->r.isr0); | |
344 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1) | |
345 | status.sreg.isr1 = readb(&up->regs->r.isr1); | |
346 | ||
347 | tty = NULL; | |
348 | if (status.stat) { | |
349 | if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
350 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || | |
351 | (status.sreg.isr1 & SAB82532_ISR1_BRK)) | |
352 | ||
353 | tty = receive_chars(up, &status, regs); | |
354 | if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || | |
355 | (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC))) | |
356 | check_status(up, &status); | |
357 | if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) | |
358 | transmit_chars(up, &status); | |
359 | } | |
360 | ||
361 | spin_unlock_irqrestore(&up->port.lock, flags); | |
362 | ||
363 | if (tty) | |
364 | tty_flip_buffer_push(tty); | |
365 | ||
366 | return IRQ_HANDLED; | |
367 | } | |
368 | ||
369 | /* port->lock is not held. */ | |
370 | static unsigned int sunsab_tx_empty(struct uart_port *port) | |
371 | { | |
372 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
373 | int ret; | |
374 | ||
375 | /* Do not need a lock for a state test like this. */ | |
376 | if (test_bit(SAB82532_ALLS, &up->irqflags)) | |
377 | ret = TIOCSER_TEMT; | |
378 | else | |
379 | ret = 0; | |
380 | ||
381 | return ret; | |
382 | } | |
383 | ||
384 | /* port->lock held by caller. */ | |
385 | static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
386 | { | |
387 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
388 | ||
389 | if (mctrl & TIOCM_RTS) { | |
e4fdee8e DM |
390 | up->cached_mode &= ~SAB82532_MODE_FRTS; |
391 | up->cached_mode |= SAB82532_MODE_RTS; | |
1da177e4 | 392 | } else { |
e4fdee8e DM |
393 | up->cached_mode |= (SAB82532_MODE_FRTS | |
394 | SAB82532_MODE_RTS); | |
1da177e4 LT |
395 | } |
396 | if (mctrl & TIOCM_DTR) { | |
e4fdee8e | 397 | up->cached_pvr &= ~(up->pvr_dtr_bit); |
1da177e4 | 398 | } else { |
e4fdee8e | 399 | up->cached_pvr |= up->pvr_dtr_bit; |
1da177e4 | 400 | } |
e4fdee8e DM |
401 | |
402 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
403 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
404 | sunsab_tx_idle(up); | |
1da177e4 LT |
405 | } |
406 | ||
c5f4644e | 407 | /* port->lock is held by caller and interrupts are disabled. */ |
1da177e4 LT |
408 | static unsigned int sunsab_get_mctrl(struct uart_port *port) |
409 | { | |
410 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
1da177e4 LT |
411 | unsigned char val; |
412 | unsigned int result; | |
413 | ||
414 | result = 0; | |
415 | ||
1da177e4 LT |
416 | val = readb(&up->regs->r.pvr); |
417 | result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; | |
418 | ||
419 | val = readb(&up->regs->r.vstr); | |
420 | result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; | |
421 | ||
422 | val = readb(&up->regs->r.star); | |
423 | result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; | |
424 | ||
1da177e4 LT |
425 | return result; |
426 | } | |
427 | ||
428 | /* port->lock held by caller. */ | |
b129a8cc | 429 | static void sunsab_stop_tx(struct uart_port *port) |
1da177e4 LT |
430 | { |
431 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
432 | ||
433 | up->interrupt_mask1 |= SAB82532_IMR1_XPR; | |
434 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
435 | } | |
436 | ||
e4fdee8e DM |
437 | /* port->lock held by caller. */ |
438 | static void sunsab_tx_idle(struct uart_sunsab_port *up) | |
439 | { | |
440 | if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { | |
441 | u8 tmp; | |
442 | ||
443 | clear_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
444 | writeb(up->cached_mode, &up->regs->rw.mode); | |
445 | writeb(up->cached_pvr, &up->regs->rw.pvr); | |
446 | writeb(up->cached_dafo, &up->regs->w.dafo); | |
447 | ||
448 | writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); | |
449 | tmp = readb(&up->regs->rw.ccr2); | |
450 | tmp &= ~0xc0; | |
451 | tmp |= (up->cached_ebrg >> 2) & 0xc0; | |
452 | writeb(tmp, &up->regs->rw.ccr2); | |
453 | } | |
454 | } | |
455 | ||
1da177e4 | 456 | /* port->lock held by caller. */ |
b129a8cc | 457 | static void sunsab_start_tx(struct uart_port *port) |
1da177e4 LT |
458 | { |
459 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
460 | struct circ_buf *xmit = &up->port.info->xmit; | |
461 | int i; | |
462 | ||
463 | up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); | |
464 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
465 | ||
466 | if (!test_bit(SAB82532_XPR, &up->irqflags)) | |
467 | return; | |
468 | ||
469 | clear_bit(SAB82532_ALLS, &up->irqflags); | |
470 | clear_bit(SAB82532_XPR, &up->irqflags); | |
471 | ||
472 | for (i = 0; i < up->port.fifosize; i++) { | |
473 | writeb(xmit->buf[xmit->tail], | |
474 | &up->regs->w.xfifo[i]); | |
475 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
476 | up->port.icount.tx++; | |
477 | if (uart_circ_empty(xmit)) | |
478 | break; | |
479 | } | |
480 | ||
481 | /* Issue a Transmit Frame command. */ | |
482 | sunsab_cec_wait(up); | |
483 | writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); | |
484 | } | |
485 | ||
486 | /* port->lock is not held. */ | |
487 | static void sunsab_send_xchar(struct uart_port *port, char ch) | |
488 | { | |
489 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
490 | unsigned long flags; | |
491 | ||
492 | spin_lock_irqsave(&up->port.lock, flags); | |
493 | ||
494 | sunsab_tec_wait(up); | |
495 | writeb(ch, &up->regs->w.tic); | |
496 | ||
497 | spin_unlock_irqrestore(&up->port.lock, flags); | |
498 | } | |
499 | ||
500 | /* port->lock held by caller. */ | |
501 | static void sunsab_stop_rx(struct uart_port *port) | |
502 | { | |
503 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
504 | ||
505 | up->interrupt_mask0 |= SAB82532_ISR0_TCD; | |
506 | writeb(up->interrupt_mask1, &up->regs->w.imr0); | |
507 | } | |
508 | ||
509 | /* port->lock held by caller. */ | |
510 | static void sunsab_enable_ms(struct uart_port *port) | |
511 | { | |
512 | /* For now we always receive these interrupts. */ | |
513 | } | |
514 | ||
515 | /* port->lock is not held. */ | |
516 | static void sunsab_break_ctl(struct uart_port *port, int break_state) | |
517 | { | |
518 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
519 | unsigned long flags; | |
520 | unsigned char val; | |
521 | ||
522 | spin_lock_irqsave(&up->port.lock, flags); | |
523 | ||
e4fdee8e | 524 | val = up->cached_dafo; |
1da177e4 LT |
525 | if (break_state) |
526 | val |= SAB82532_DAFO_XBRK; | |
527 | else | |
528 | val &= ~SAB82532_DAFO_XBRK; | |
e4fdee8e DM |
529 | up->cached_dafo = val; |
530 | ||
531 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
532 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
533 | sunsab_tx_idle(up); | |
1da177e4 LT |
534 | |
535 | spin_unlock_irqrestore(&up->port.lock, flags); | |
536 | } | |
537 | ||
538 | /* port->lock is not held. */ | |
539 | static int sunsab_startup(struct uart_port *port) | |
540 | { | |
541 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
542 | unsigned long flags; | |
543 | unsigned char tmp; | |
544 | ||
545 | spin_lock_irqsave(&up->port.lock, flags); | |
546 | ||
547 | /* | |
548 | * Wait for any commands or immediate characters | |
549 | */ | |
550 | sunsab_cec_wait(up); | |
551 | sunsab_tec_wait(up); | |
552 | ||
553 | /* | |
554 | * Clear the FIFO buffers. | |
555 | */ | |
556 | writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); | |
557 | sunsab_cec_wait(up); | |
558 | writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); | |
559 | ||
560 | /* | |
561 | * Clear the interrupt registers. | |
562 | */ | |
563 | (void) readb(&up->regs->r.isr0); | |
564 | (void) readb(&up->regs->r.isr1); | |
565 | ||
566 | /* | |
567 | * Now, initialize the UART | |
568 | */ | |
569 | writeb(0, &up->regs->w.ccr0); /* power-down */ | |
570 | writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | | |
571 | SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); | |
572 | writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); | |
573 | writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | | |
574 | SAB82532_CCR2_TOE, &up->regs->w.ccr2); | |
575 | writeb(0, &up->regs->w.ccr3); | |
576 | writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); | |
e4fdee8e DM |
577 | up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | |
578 | SAB82532_MODE_RAC); | |
579 | writeb(up->cached_mode, &up->regs->w.mode); | |
1da177e4 LT |
580 | writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); |
581 | ||
582 | tmp = readb(&up->regs->rw.ccr0); | |
583 | tmp |= SAB82532_CCR0_PU; /* power-up */ | |
584 | writeb(tmp, &up->regs->rw.ccr0); | |
585 | ||
586 | /* | |
587 | * Finally, enable interrupts | |
588 | */ | |
589 | up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | | |
590 | SAB82532_IMR0_PLLA); | |
591 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
592 | up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | | |
593 | SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | | |
594 | SAB82532_IMR1_CSC | SAB82532_IMR1_XON | | |
595 | SAB82532_IMR1_XPR); | |
596 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
597 | set_bit(SAB82532_ALLS, &up->irqflags); | |
598 | set_bit(SAB82532_XPR, &up->irqflags); | |
599 | ||
600 | spin_unlock_irqrestore(&up->port.lock, flags); | |
601 | ||
602 | return 0; | |
603 | } | |
604 | ||
605 | /* port->lock is not held. */ | |
606 | static void sunsab_shutdown(struct uart_port *port) | |
607 | { | |
608 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
609 | unsigned long flags; | |
1da177e4 LT |
610 | |
611 | spin_lock_irqsave(&up->port.lock, flags); | |
612 | ||
613 | /* Disable Interrupts */ | |
614 | up->interrupt_mask0 = 0xff; | |
615 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
616 | up->interrupt_mask1 = 0xff; | |
617 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
618 | ||
619 | /* Disable break condition */ | |
e4fdee8e DM |
620 | up->cached_dafo = readb(&up->regs->rw.dafo); |
621 | up->cached_dafo &= ~SAB82532_DAFO_XBRK; | |
622 | writeb(up->cached_dafo, &up->regs->rw.dafo); | |
1da177e4 LT |
623 | |
624 | /* Disable Receiver */ | |
e4fdee8e DM |
625 | up->cached_mode &= ~SAB82532_MODE_RAC; |
626 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1da177e4 LT |
627 | |
628 | /* | |
629 | * XXX FIXME | |
630 | * | |
631 | * If the chip is powered down here the system hangs/crashes during | |
632 | * reboot or shutdown. This needs to be investigated further, | |
633 | * similar behaviour occurs in 2.4 when the driver is configured | |
634 | * as a module only. One hint may be that data is sometimes | |
635 | * transmitted at 9600 baud during shutdown (regardless of the | |
636 | * speed the chip was configured for when the port was open). | |
637 | */ | |
638 | #if 0 | |
639 | /* Power Down */ | |
640 | tmp = readb(&up->regs->rw.ccr0); | |
641 | tmp &= ~SAB82532_CCR0_PU; | |
642 | writeb(tmp, &up->regs->rw.ccr0); | |
643 | #endif | |
644 | ||
645 | spin_unlock_irqrestore(&up->port.lock, flags); | |
646 | } | |
647 | ||
648 | /* | |
649 | * This is used to figure out the divisor speeds. | |
650 | * | |
651 | * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), | |
652 | * | |
653 | * with 0 <= N < 64 and 0 <= M < 16 | |
654 | */ | |
655 | ||
656 | static void calc_ebrg(int baud, int *n_ret, int *m_ret) | |
657 | { | |
658 | int n, m; | |
659 | ||
660 | if (baud == 0) { | |
661 | *n_ret = 0; | |
662 | *m_ret = 0; | |
663 | return; | |
664 | } | |
665 | ||
666 | /* | |
667 | * We scale numbers by 10 so that we get better accuracy | |
668 | * without having to use floating point. Here we increment m | |
669 | * until n is within the valid range. | |
670 | */ | |
671 | n = (SAB_BASE_BAUD * 10) / baud; | |
672 | m = 0; | |
673 | while (n >= 640) { | |
674 | n = n / 2; | |
675 | m++; | |
676 | } | |
677 | n = (n+5) / 10; | |
678 | /* | |
679 | * We try very hard to avoid speeds with M == 0 since they may | |
680 | * not work correctly for XTAL frequences above 10 MHz. | |
681 | */ | |
682 | if ((m == 0) && ((n & 1) == 0)) { | |
683 | n = n / 2; | |
684 | m++; | |
685 | } | |
686 | *n_ret = n - 1; | |
687 | *m_ret = m; | |
688 | } | |
689 | ||
690 | /* Internal routine, port->lock is held and local interrupts are disabled. */ | |
691 | static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, | |
b179fb8c DM |
692 | unsigned int iflag, unsigned int baud, |
693 | unsigned int quot) | |
1da177e4 | 694 | { |
1da177e4 LT |
695 | unsigned char dafo; |
696 | int bits, n, m; | |
697 | ||
698 | /* Byte size and parity */ | |
699 | switch (cflag & CSIZE) { | |
700 | case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; | |
701 | case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; | |
702 | case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; | |
703 | case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; | |
704 | /* Never happens, but GCC is too dumb to figure it out */ | |
705 | default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; | |
706 | } | |
707 | ||
708 | if (cflag & CSTOPB) { | |
709 | dafo |= SAB82532_DAFO_STOP; | |
710 | bits++; | |
711 | } | |
712 | ||
713 | if (cflag & PARENB) { | |
714 | dafo |= SAB82532_DAFO_PARE; | |
715 | bits++; | |
716 | } | |
717 | ||
718 | if (cflag & PARODD) { | |
719 | dafo |= SAB82532_DAFO_PAR_ODD; | |
720 | } else { | |
721 | dafo |= SAB82532_DAFO_PAR_EVEN; | |
722 | } | |
e4fdee8e | 723 | up->cached_dafo = dafo; |
1da177e4 LT |
724 | |
725 | calc_ebrg(baud, &n, &m); | |
726 | ||
e4fdee8e | 727 | up->cached_ebrg = n | (m << 6); |
1da177e4 LT |
728 | |
729 | up->tec_timeout = (10 * 1000000) / baud; | |
730 | up->cec_timeout = up->tec_timeout >> 2; | |
731 | ||
732 | /* CTS flow control flags */ | |
733 | /* We encode read_status_mask and ignore_status_mask like so: | |
734 | * | |
735 | * --------------------- | |
736 | * | ... | ISR1 | ISR0 | | |
737 | * --------------------- | |
738 | * .. 15 8 7 0 | |
739 | */ | |
740 | ||
741 | up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
742 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | | |
743 | SAB82532_ISR0_CDSC); | |
744 | up->port.read_status_mask |= (SAB82532_ISR1_CSC | | |
745 | SAB82532_ISR1_ALLS | | |
746 | SAB82532_ISR1_XPR) << 8; | |
747 | if (iflag & INPCK) | |
748 | up->port.read_status_mask |= (SAB82532_ISR0_PERR | | |
749 | SAB82532_ISR0_FERR); | |
750 | if (iflag & (BRKINT | PARMRK)) | |
751 | up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); | |
752 | ||
753 | /* | |
754 | * Characteres to ignore | |
755 | */ | |
756 | up->port.ignore_status_mask = 0; | |
757 | if (iflag & IGNPAR) | |
758 | up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | | |
759 | SAB82532_ISR0_FERR); | |
760 | if (iflag & IGNBRK) { | |
761 | up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); | |
762 | /* | |
763 | * If we're ignoring parity and break indicators, | |
764 | * ignore overruns too (for real raw support). | |
765 | */ | |
766 | if (iflag & IGNPAR) | |
767 | up->port.ignore_status_mask |= SAB82532_ISR0_RFO; | |
768 | } | |
769 | ||
770 | /* | |
771 | * ignore all characters if CREAD is not set | |
772 | */ | |
773 | if ((cflag & CREAD) == 0) | |
774 | up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | | |
775 | SAB82532_ISR0_TCD); | |
776 | ||
b179fb8c DM |
777 | uart_update_timeout(&up->port, cflag, |
778 | (up->port.uartclk / (16 * quot))); | |
779 | ||
e4fdee8e DM |
780 | /* Now schedule a register update when the chip's |
781 | * transmitter is idle. | |
782 | */ | |
783 | up->cached_mode |= SAB82532_MODE_RAC; | |
784 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
785 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
786 | sunsab_tx_idle(up); | |
1da177e4 LT |
787 | } |
788 | ||
789 | /* port->lock is not held. */ | |
790 | static void sunsab_set_termios(struct uart_port *port, struct termios *termios, | |
791 | struct termios *old) | |
792 | { | |
793 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
794 | unsigned long flags; | |
b179fb8c DM |
795 | unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); |
796 | unsigned int quot = uart_get_divisor(port, baud); | |
1da177e4 LT |
797 | |
798 | spin_lock_irqsave(&up->port.lock, flags); | |
b179fb8c | 799 | sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); |
1da177e4 LT |
800 | spin_unlock_irqrestore(&up->port.lock, flags); |
801 | } | |
802 | ||
803 | static const char *sunsab_type(struct uart_port *port) | |
804 | { | |
805 | struct uart_sunsab_port *up = (void *)port; | |
806 | static char buf[36]; | |
807 | ||
808 | sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); | |
809 | return buf; | |
810 | } | |
811 | ||
812 | static void sunsab_release_port(struct uart_port *port) | |
813 | { | |
814 | } | |
815 | ||
816 | static int sunsab_request_port(struct uart_port *port) | |
817 | { | |
818 | return 0; | |
819 | } | |
820 | ||
821 | static void sunsab_config_port(struct uart_port *port, int flags) | |
822 | { | |
823 | } | |
824 | ||
825 | static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) | |
826 | { | |
827 | return -EINVAL; | |
828 | } | |
829 | ||
830 | static struct uart_ops sunsab_pops = { | |
831 | .tx_empty = sunsab_tx_empty, | |
832 | .set_mctrl = sunsab_set_mctrl, | |
833 | .get_mctrl = sunsab_get_mctrl, | |
834 | .stop_tx = sunsab_stop_tx, | |
835 | .start_tx = sunsab_start_tx, | |
836 | .send_xchar = sunsab_send_xchar, | |
837 | .stop_rx = sunsab_stop_rx, | |
838 | .enable_ms = sunsab_enable_ms, | |
839 | .break_ctl = sunsab_break_ctl, | |
840 | .startup = sunsab_startup, | |
841 | .shutdown = sunsab_shutdown, | |
842 | .set_termios = sunsab_set_termios, | |
843 | .type = sunsab_type, | |
844 | .release_port = sunsab_release_port, | |
845 | .request_port = sunsab_request_port, | |
846 | .config_port = sunsab_config_port, | |
847 | .verify_port = sunsab_verify_port, | |
848 | }; | |
849 | ||
850 | static struct uart_driver sunsab_reg = { | |
851 | .owner = THIS_MODULE, | |
852 | .driver_name = "serial", | |
1da177e4 LT |
853 | .dev_name = "ttyS", |
854 | .major = TTY_MAJOR, | |
855 | }; | |
856 | ||
857 | static struct uart_sunsab_port *sunsab_ports; | |
858 | static int num_channels; | |
859 | ||
860 | #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE | |
861 | ||
d358788f | 862 | static void sunsab_console_putchar(struct uart_port *port, int c) |
1da177e4 | 863 | { |
d358788f | 864 | struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; |
1da177e4 LT |
865 | unsigned long flags; |
866 | ||
867 | spin_lock_irqsave(&up->port.lock, flags); | |
868 | ||
869 | sunsab_tec_wait(up); | |
870 | writeb(c, &up->regs->w.tic); | |
871 | ||
872 | spin_unlock_irqrestore(&up->port.lock, flags); | |
873 | } | |
874 | ||
875 | static void sunsab_console_write(struct console *con, const char *s, unsigned n) | |
876 | { | |
877 | struct uart_sunsab_port *up = &sunsab_ports[con->index]; | |
1da177e4 | 878 | |
d358788f | 879 | uart_console_write(&up->port, s, n, sunsab_console_putchar); |
1da177e4 LT |
880 | sunsab_tec_wait(up); |
881 | } | |
882 | ||
883 | static int sunsab_console_setup(struct console *con, char *options) | |
884 | { | |
885 | struct uart_sunsab_port *up = &sunsab_ports[con->index]; | |
886 | unsigned long flags; | |
b179fb8c | 887 | unsigned int baud, quot; |
1da177e4 LT |
888 | |
889 | printk("Console: ttyS%d (SAB82532)\n", | |
890 | (sunsab_reg.minor - 64) + con->index); | |
891 | ||
892 | sunserial_console_termios(con); | |
893 | ||
1da177e4 LT |
894 | switch (con->cflag & CBAUD) { |
895 | case B150: baud = 150; break; | |
896 | case B300: baud = 300; break; | |
897 | case B600: baud = 600; break; | |
898 | case B1200: baud = 1200; break; | |
899 | case B2400: baud = 2400; break; | |
900 | case B4800: baud = 4800; break; | |
901 | default: case B9600: baud = 9600; break; | |
902 | case B19200: baud = 19200; break; | |
903 | case B38400: baud = 38400; break; | |
c126cf80 ED |
904 | case B57600: baud = 57600; break; |
905 | case B115200: baud = 115200; break; | |
906 | case B230400: baud = 230400; break; | |
907 | case B460800: baud = 460800; break; | |
1da177e4 LT |
908 | }; |
909 | ||
910 | /* | |
911 | * Temporary fix. | |
912 | */ | |
913 | spin_lock_init(&up->port.lock); | |
914 | ||
915 | /* | |
916 | * Initialize the hardware | |
917 | */ | |
918 | sunsab_startup(&up->port); | |
919 | ||
920 | spin_lock_irqsave(&up->port.lock, flags); | |
921 | ||
922 | /* | |
923 | * Finally, enable interrupts | |
924 | */ | |
925 | up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | | |
926 | SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; | |
927 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
928 | up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | | |
929 | SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | | |
930 | SAB82532_IMR1_CSC | SAB82532_IMR1_XON | | |
931 | SAB82532_IMR1_XPR; | |
932 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
933 | ||
b179fb8c DM |
934 | quot = uart_get_divisor(&up->port, baud); |
935 | sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); | |
1da177e4 LT |
936 | sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); |
937 | ||
938 | spin_unlock_irqrestore(&up->port.lock, flags); | |
939 | ||
940 | return 0; | |
941 | } | |
942 | ||
943 | static struct console sunsab_console = { | |
944 | .name = "ttyS", | |
945 | .write = sunsab_console_write, | |
946 | .device = uart_console_device, | |
947 | .setup = sunsab_console_setup, | |
948 | .flags = CON_PRINTBUFFER, | |
949 | .index = -1, | |
950 | .data = &sunsab_reg, | |
951 | }; | |
1da177e4 | 952 | |
1ddb7c98 | 953 | static inline struct console *SUNSAB_CONSOLE(void) |
1da177e4 LT |
954 | { |
955 | int i; | |
956 | ||
957 | if (con_is_present()) | |
1ddb7c98 | 958 | return NULL; |
1da177e4 LT |
959 | |
960 | for (i = 0; i < num_channels; i++) { | |
961 | int this_minor = sunsab_reg.minor + i; | |
962 | ||
963 | if ((this_minor - 64) == (serial_console - 1)) | |
964 | break; | |
965 | } | |
966 | if (i == num_channels) | |
1ddb7c98 | 967 | return NULL; |
1da177e4 LT |
968 | |
969 | sunsab_console.index = i; | |
1ddb7c98 DM |
970 | |
971 | return &sunsab_console; | |
1da177e4 LT |
972 | } |
973 | #else | |
1ddb7c98 | 974 | #define SUNSAB_CONSOLE() (NULL) |
1da177e4 LT |
975 | #define sunsab_console_init() do { } while (0) |
976 | #endif | |
977 | ||
89d1d0ab DM |
978 | static int __devinit sunsab_init_one(struct uart_sunsab_port *up, |
979 | struct of_device *op, | |
980 | unsigned long offset, | |
981 | int line) | |
1da177e4 | 982 | { |
c4d37215 DM |
983 | up->port.line = line; |
984 | up->port.dev = &op->dev; | |
985 | ||
986 | up->port.mapbase = op->resource[0].start + offset; | |
987 | up->port.membase = of_ioremap(&op->resource[0], offset, | |
988 | sizeof(union sab82532_async_regs), | |
989 | "sab"); | |
990 | if (!up->port.membase) | |
991 | return -ENOMEM; | |
992 | up->regs = (union sab82532_async_regs __iomem *) up->port.membase; | |
1da177e4 | 993 | |
c4d37215 | 994 | up->port.irq = op->irqs[0]; |
1da177e4 | 995 | |
c4d37215 DM |
996 | up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; |
997 | up->port.iotype = UPIO_MEM; | |
1da177e4 | 998 | |
c4d37215 | 999 | writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); |
1da177e4 | 1000 | |
c4d37215 DM |
1001 | up->port.ops = &sunsab_pops; |
1002 | up->port.type = PORT_SUNSAB; | |
1003 | up->port.uartclk = SAB_BASE_BAUD; | |
1da177e4 | 1004 | |
c4d37215 DM |
1005 | up->type = readb(&up->regs->r.vstr) & 0x0f; |
1006 | writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); | |
1007 | writeb(0xff, &up->regs->w.pim); | |
1008 | if ((up->port.line & 0x1) == 0) { | |
1009 | up->pvr_dsr_bit = (1 << 0); | |
1010 | up->pvr_dtr_bit = (1 << 1); | |
1011 | } else { | |
1012 | up->pvr_dsr_bit = (1 << 3); | |
1013 | up->pvr_dtr_bit = (1 << 2); | |
1014 | } | |
1015 | up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); | |
1016 | writeb(up->cached_pvr, &up->regs->w.pvr); | |
1017 | up->cached_mode = readb(&up->regs->rw.mode); | |
1018 | up->cached_mode |= SAB82532_MODE_FRTS; | |
1019 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1020 | up->cached_mode |= SAB82532_MODE_RTS; | |
1021 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1da177e4 | 1022 | |
c4d37215 DM |
1023 | up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; |
1024 | up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; | |
1da177e4 | 1025 | |
c4d37215 DM |
1026 | if (!(up->port.line & 0x01)) { |
1027 | int err; | |
1028 | ||
1029 | err = request_irq(up->port.irq, sunsab_interrupt, | |
1030 | SA_SHIRQ, "sab", up); | |
1031 | if (err) { | |
1032 | of_iounmap(up->port.membase, | |
1033 | sizeof(union sab82532_async_regs)); | |
1034 | return err; | |
1035 | } | |
1da177e4 | 1036 | } |
c4d37215 DM |
1037 | |
1038 | return 0; | |
1da177e4 LT |
1039 | } |
1040 | ||
c4d37215 | 1041 | static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match) |
1da177e4 | 1042 | { |
c4d37215 DM |
1043 | static int inst; |
1044 | struct uart_sunsab_port *up; | |
1045 | int err; | |
1046 | ||
1047 | up = &sunsab_ports[inst * 2]; | |
1048 | ||
1049 | err = sunsab_init_one(&up[0], op, | |
1050 | sizeof(union sab82532_async_regs), | |
1051 | (inst * 2) + 0); | |
1052 | if (err) | |
1053 | return err; | |
1054 | ||
1055 | err = sunsab_init_one(&up[0], op, 0, | |
1056 | (inst * 2) + 1); | |
1057 | if (err) { | |
1058 | of_iounmap(up[0].port.membase, | |
1059 | sizeof(union sab82532_async_regs)); | |
1060 | free_irq(up[0].port.irq, &up[0]); | |
1061 | return err; | |
1062 | } | |
1da177e4 | 1063 | |
c4d37215 DM |
1064 | uart_add_one_port(&sunsab_reg, &up[0].port); |
1065 | uart_add_one_port(&sunsab_reg, &up[1].port); | |
1da177e4 | 1066 | |
c4d37215 | 1067 | dev_set_drvdata(&op->dev, &up[0]); |
1da177e4 | 1068 | |
c4d37215 | 1069 | inst++; |
1da177e4 | 1070 | |
1da177e4 LT |
1071 | return 0; |
1072 | } | |
1073 | ||
c4d37215 | 1074 | static void __devexit sab_remove_one(struct uart_sunsab_port *up) |
1da177e4 | 1075 | { |
c4d37215 DM |
1076 | uart_remove_one_port(&sunsab_reg, &up->port); |
1077 | if (!(up->port.line & 1)) | |
1078 | free_irq(up->port.irq, up); | |
1079 | of_iounmap(up->port.membase, | |
1080 | sizeof(union sab82532_async_regs)); | |
1da177e4 LT |
1081 | } |
1082 | ||
c4d37215 | 1083 | static int __devexit sab_remove(struct of_device *op) |
1da177e4 | 1084 | { |
c4d37215 | 1085 | struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); |
1da177e4 | 1086 | |
c4d37215 DM |
1087 | sab_remove_one(&up[0]); |
1088 | sab_remove_one(&up[1]); | |
1da177e4 | 1089 | |
c4d37215 | 1090 | dev_set_drvdata(&op->dev, NULL); |
1da177e4 | 1091 | |
c4d37215 DM |
1092 | return 0; |
1093 | } | |
1da177e4 | 1094 | |
c4d37215 DM |
1095 | static struct of_device_id sab_match[] = { |
1096 | { | |
1097 | .name = "se", | |
1098 | }, | |
1099 | { | |
1100 | .name = "serial", | |
1101 | .compatible = "sab82532", | |
1102 | }, | |
1103 | {}, | |
1104 | }; | |
1105 | MODULE_DEVICE_TABLE(of, sab_match); | |
1da177e4 | 1106 | |
c4d37215 DM |
1107 | static struct of_platform_driver sab_driver = { |
1108 | .name = "sab", | |
1109 | .match_table = sab_match, | |
1110 | .probe = sab_probe, | |
1111 | .remove = __devexit_p(sab_remove), | |
1112 | }; | |
1da177e4 | 1113 | |
c4d37215 DM |
1114 | static int __init sunsab_init(void) |
1115 | { | |
1116 | struct device_node *dp; | |
1117 | int err; | |
1118 | ||
1119 | num_channels = 0; | |
1120 | for_each_node_by_name(dp, "su") | |
1121 | num_channels += 2; | |
1122 | for_each_node_by_name(dp, "serial") { | |
1123 | if (of_device_is_compatible(dp, "sab82532")) | |
1124 | num_channels += 2; | |
1da177e4 LT |
1125 | } |
1126 | ||
c4d37215 DM |
1127 | if (num_channels) { |
1128 | sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * | |
1129 | num_channels, GFP_KERNEL); | |
1130 | if (!sunsab_ports) | |
1131 | return -ENOMEM; | |
f5deb807 | 1132 | |
c4d37215 DM |
1133 | sunsab_reg.minor = sunserial_current_minor; |
1134 | sunsab_reg.nr = num_channels; | |
1ddb7c98 | 1135 | |
c4d37215 DM |
1136 | err = uart_register_driver(&sunsab_reg); |
1137 | if (err) { | |
1138 | kfree(sunsab_ports); | |
1139 | sunsab_ports = NULL; | |
1da177e4 | 1140 | |
c4d37215 DM |
1141 | return err; |
1142 | } | |
1143 | ||
1144 | sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; | |
1145 | sunsab_reg.cons = SUNSAB_CONSOLE(); | |
1146 | sunserial_current_minor += num_channels; | |
1da177e4 LT |
1147 | } |
1148 | ||
c4d37215 | 1149 | return of_register_driver(&sab_driver, &of_bus_type); |
1da177e4 LT |
1150 | } |
1151 | ||
1152 | static void __exit sunsab_exit(void) | |
1153 | { | |
c4d37215 DM |
1154 | of_unregister_driver(&sab_driver); |
1155 | if (num_channels) { | |
1156 | sunserial_current_minor -= num_channels; | |
1157 | uart_unregister_driver(&sunsab_reg); | |
1da177e4 LT |
1158 | } |
1159 | ||
1da177e4 LT |
1160 | kfree(sunsab_ports); |
1161 | sunsab_ports = NULL; | |
1162 | } | |
1163 | ||
1164 | module_init(sunsab_init); | |
1165 | module_exit(sunsab_exit); | |
1166 | ||
1167 | MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); | |
1168 | MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); | |
1169 | MODULE_LICENSE("GPL"); |