]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. |
2 | * | |
3 | * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) | |
4 | * Copyright (C) 2002 David S. Miller (davem@redhat.com) | |
5 | * | |
6 | * Rewrote buffer handling to use CIRC(Circular Buffer) macros. | |
7 | * Maxim Krasnyanskiy <maxk@qualcomm.com> | |
8 | * | |
9 | * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud | |
10 | * rates to be programmed into the UART. Also eliminated a lot of | |
11 | * duplicated code in the console setup. | |
12 | * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 | |
13 | * | |
14 | * Ported to new 2.5.x UART layer. | |
15 | * David S. Miller <davem@redhat.com> | |
16 | */ | |
17 | ||
18 | #include <linux/config.h> | |
19 | #include <linux/module.h> | |
20 | #include <linux/kernel.h> | |
21 | #include <linux/sched.h> | |
22 | #include <linux/errno.h> | |
23 | #include <linux/tty.h> | |
24 | #include <linux/tty_flip.h> | |
25 | #include <linux/major.h> | |
26 | #include <linux/string.h> | |
27 | #include <linux/ptrace.h> | |
28 | #include <linux/ioport.h> | |
29 | #include <linux/circ_buf.h> | |
30 | #include <linux/serial.h> | |
31 | #include <linux/sysrq.h> | |
32 | #include <linux/console.h> | |
33 | #include <linux/spinlock.h> | |
34 | #include <linux/slab.h> | |
35 | #include <linux/delay.h> | |
36 | #include <linux/init.h> | |
37 | ||
38 | #include <asm/io.h> | |
39 | #include <asm/irq.h> | |
40 | #include <asm/oplib.h> | |
41 | #include <asm/ebus.h> | |
42 | ||
43 | #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
44 | #define SUPPORT_SYSRQ | |
45 | #endif | |
46 | ||
47 | #include <linux/serial_core.h> | |
48 | ||
49 | #include "suncore.h" | |
50 | #include "sunsab.h" | |
51 | ||
52 | struct uart_sunsab_port { | |
53 | struct uart_port port; /* Generic UART port */ | |
54 | union sab82532_async_regs __iomem *regs; /* Chip registers */ | |
55 | unsigned long irqflags; /* IRQ state flags */ | |
56 | int dsr; /* Current DSR state */ | |
57 | unsigned int cec_timeout; /* Chip poll timeout... */ | |
58 | unsigned int tec_timeout; /* likewise */ | |
59 | unsigned char interrupt_mask0;/* ISR0 masking */ | |
60 | unsigned char interrupt_mask1;/* ISR1 masking */ | |
61 | unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ | |
62 | unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ | |
63 | int type; /* SAB82532 version */ | |
e4fdee8e DM |
64 | |
65 | /* Setting configuration bits while the transmitter is active | |
66 | * can cause garbage characters to get emitted by the chip. | |
67 | * Therefore, we cache such writes here and do the real register | |
68 | * write the next time the transmitter becomes idle. | |
69 | */ | |
70 | unsigned int cached_ebrg; | |
71 | unsigned char cached_mode; | |
72 | unsigned char cached_pvr; | |
73 | unsigned char cached_dafo; | |
1da177e4 LT |
74 | }; |
75 | ||
76 | /* | |
77 | * This assumes you have a 29.4912 MHz clock for your UART. | |
78 | */ | |
79 | #define SAB_BASE_BAUD ( 29491200 / 16 ) | |
80 | ||
81 | static char *sab82532_version[16] = { | |
82 | "V1.0", "V2.0", "V3.2", "V(0x03)", | |
83 | "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", | |
84 | "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", | |
85 | "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" | |
86 | }; | |
87 | ||
88 | #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ | |
89 | #define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ | |
90 | ||
91 | #define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ | |
92 | #define SAB82532_XMIT_FIFO_SIZE 32 | |
93 | ||
94 | static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) | |
95 | { | |
96 | int timeout = up->tec_timeout; | |
97 | ||
98 | while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) | |
99 | udelay(1); | |
100 | } | |
101 | ||
102 | static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) | |
103 | { | |
104 | int timeout = up->cec_timeout; | |
105 | ||
106 | while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) | |
107 | udelay(1); | |
108 | } | |
109 | ||
110 | static struct tty_struct * | |
111 | receive_chars(struct uart_sunsab_port *up, | |
112 | union sab82532_irq_status *stat, | |
113 | struct pt_regs *regs) | |
114 | { | |
115 | struct tty_struct *tty = NULL; | |
116 | unsigned char buf[32]; | |
117 | int saw_console_brk = 0; | |
118 | int free_fifo = 0; | |
119 | int count = 0; | |
120 | int i; | |
121 | ||
122 | if (up->port.info != NULL) /* Unopened serial console */ | |
123 | tty = up->port.info->tty; | |
124 | ||
125 | /* Read number of BYTES (Character + Status) available. */ | |
126 | if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { | |
127 | count = SAB82532_RECV_FIFO_SIZE; | |
128 | free_fifo++; | |
129 | } | |
130 | ||
131 | if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { | |
132 | count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); | |
133 | free_fifo++; | |
134 | } | |
135 | ||
136 | /* Issue a FIFO read command in case we where idle. */ | |
137 | if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { | |
138 | sunsab_cec_wait(up); | |
139 | writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); | |
140 | return tty; | |
141 | } | |
142 | ||
143 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
144 | free_fifo++; | |
145 | ||
146 | /* Read the FIFO. */ | |
147 | for (i = 0; i < count; i++) | |
148 | buf[i] = readb(&up->regs->r.rfifo[i]); | |
149 | ||
150 | /* Issue Receive Message Complete command. */ | |
151 | if (free_fifo) { | |
152 | sunsab_cec_wait(up); | |
153 | writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); | |
154 | } | |
155 | ||
156 | /* Count may be zero for BRK, so we check for it here */ | |
157 | if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && | |
158 | (up->port.line == up->port.cons->index)) | |
159 | saw_console_brk = 1; | |
160 | ||
161 | for (i = 0; i < count; i++) { | |
33f0f88f | 162 | unsigned char ch = buf[i], flag; |
1da177e4 LT |
163 | |
164 | if (tty == NULL) { | |
165 | uart_handle_sysrq_char(&up->port, ch, regs); | |
166 | continue; | |
167 | } | |
168 | ||
33f0f88f | 169 | flag = TTY_NORMAL; |
1da177e4 LT |
170 | up->port.icount.rx++; |
171 | ||
172 | if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | | |
173 | SAB82532_ISR0_FERR | | |
174 | SAB82532_ISR0_RFO)) || | |
175 | unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { | |
176 | /* | |
177 | * For statistics only | |
178 | */ | |
179 | if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { | |
180 | stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | | |
181 | SAB82532_ISR0_FERR); | |
182 | up->port.icount.brk++; | |
183 | /* | |
184 | * We do the SysRQ and SAK checking | |
185 | * here because otherwise the break | |
186 | * may get masked by ignore_status_mask | |
187 | * or read_status_mask. | |
188 | */ | |
189 | if (uart_handle_break(&up->port)) | |
190 | continue; | |
191 | } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) | |
192 | up->port.icount.parity++; | |
193 | else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) | |
194 | up->port.icount.frame++; | |
195 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
196 | up->port.icount.overrun++; | |
197 | ||
198 | /* | |
199 | * Mask off conditions which should be ingored. | |
200 | */ | |
201 | stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); | |
202 | stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); | |
203 | ||
204 | if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { | |
33f0f88f | 205 | flag = TTY_BREAK; |
1da177e4 | 206 | } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) |
33f0f88f | 207 | flag = TTY_PARITY; |
1da177e4 | 208 | else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) |
33f0f88f | 209 | flag = TTY_FRAME; |
1da177e4 LT |
210 | } |
211 | ||
212 | if (uart_handle_sysrq_char(&up->port, ch, regs)) | |
213 | continue; | |
214 | ||
215 | if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && | |
33f0f88f AC |
216 | (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) |
217 | tty_insert_flip_char(tty, ch, flag); | |
218 | if (stat->sreg.isr0 & SAB82532_ISR0_RFO) | |
219 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
1da177e4 LT |
220 | } |
221 | ||
222 | if (saw_console_brk) | |
223 | sun_do_break(); | |
224 | ||
225 | return tty; | |
226 | } | |
227 | ||
b129a8cc | 228 | static void sunsab_stop_tx(struct uart_port *); |
e4fdee8e | 229 | static void sunsab_tx_idle(struct uart_sunsab_port *); |
1da177e4 LT |
230 | |
231 | static void transmit_chars(struct uart_sunsab_port *up, | |
232 | union sab82532_irq_status *stat) | |
233 | { | |
234 | struct circ_buf *xmit = &up->port.info->xmit; | |
235 | int i; | |
236 | ||
237 | if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { | |
238 | up->interrupt_mask1 |= SAB82532_IMR1_ALLS; | |
239 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
240 | set_bit(SAB82532_ALLS, &up->irqflags); | |
241 | } | |
242 | ||
243 | #if 0 /* bde@nwlink.com says this check causes problems */ | |
244 | if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) | |
245 | return; | |
246 | #endif | |
247 | ||
248 | if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) | |
249 | return; | |
250 | ||
251 | set_bit(SAB82532_XPR, &up->irqflags); | |
e4fdee8e | 252 | sunsab_tx_idle(up); |
1da177e4 LT |
253 | |
254 | if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { | |
255 | up->interrupt_mask1 |= SAB82532_IMR1_XPR; | |
256 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
1da177e4 LT |
257 | return; |
258 | } | |
259 | ||
260 | up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); | |
261 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
262 | clear_bit(SAB82532_ALLS, &up->irqflags); | |
263 | ||
264 | /* Stuff 32 bytes into Transmit FIFO. */ | |
265 | clear_bit(SAB82532_XPR, &up->irqflags); | |
266 | for (i = 0; i < up->port.fifosize; i++) { | |
267 | writeb(xmit->buf[xmit->tail], | |
268 | &up->regs->w.xfifo[i]); | |
269 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
270 | up->port.icount.tx++; | |
271 | if (uart_circ_empty(xmit)) | |
272 | break; | |
273 | } | |
274 | ||
275 | /* Issue a Transmit Frame command. */ | |
276 | sunsab_cec_wait(up); | |
277 | writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); | |
278 | ||
279 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
280 | uart_write_wakeup(&up->port); | |
281 | ||
282 | if (uart_circ_empty(xmit)) | |
b129a8cc | 283 | sunsab_stop_tx(&up->port); |
1da177e4 LT |
284 | } |
285 | ||
286 | static void check_status(struct uart_sunsab_port *up, | |
287 | union sab82532_irq_status *stat) | |
288 | { | |
289 | if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) | |
290 | uart_handle_dcd_change(&up->port, | |
291 | !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); | |
292 | ||
293 | if (stat->sreg.isr1 & SAB82532_ISR1_CSC) | |
294 | uart_handle_cts_change(&up->port, | |
295 | (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); | |
296 | ||
297 | if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { | |
298 | up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; | |
299 | up->port.icount.dsr++; | |
300 | } | |
301 | ||
302 | wake_up_interruptible(&up->port.info->delta_msr_wait); | |
303 | } | |
304 | ||
305 | static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs) | |
306 | { | |
307 | struct uart_sunsab_port *up = dev_id; | |
308 | struct tty_struct *tty; | |
309 | union sab82532_irq_status status; | |
310 | unsigned long flags; | |
311 | ||
312 | spin_lock_irqsave(&up->port.lock, flags); | |
313 | ||
314 | status.stat = 0; | |
315 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0) | |
316 | status.sreg.isr0 = readb(&up->regs->r.isr0); | |
317 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1) | |
318 | status.sreg.isr1 = readb(&up->regs->r.isr1); | |
319 | ||
320 | tty = NULL; | |
321 | if (status.stat) { | |
322 | if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
323 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || | |
324 | (status.sreg.isr1 & SAB82532_ISR1_BRK)) | |
325 | tty = receive_chars(up, &status, regs); | |
326 | if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || | |
327 | (status.sreg.isr1 & SAB82532_ISR1_CSC)) | |
328 | check_status(up, &status); | |
329 | if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) | |
330 | transmit_chars(up, &status); | |
331 | } | |
332 | ||
333 | spin_unlock(&up->port.lock); | |
334 | ||
335 | if (tty) | |
336 | tty_flip_buffer_push(tty); | |
337 | ||
338 | up++; | |
339 | ||
340 | spin_lock(&up->port.lock); | |
341 | ||
342 | status.stat = 0; | |
343 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0) | |
344 | status.sreg.isr0 = readb(&up->regs->r.isr0); | |
345 | if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1) | |
346 | status.sreg.isr1 = readb(&up->regs->r.isr1); | |
347 | ||
348 | tty = NULL; | |
349 | if (status.stat) { | |
350 | if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
351 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || | |
352 | (status.sreg.isr1 & SAB82532_ISR1_BRK)) | |
353 | ||
354 | tty = receive_chars(up, &status, regs); | |
355 | if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || | |
356 | (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC))) | |
357 | check_status(up, &status); | |
358 | if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) | |
359 | transmit_chars(up, &status); | |
360 | } | |
361 | ||
362 | spin_unlock_irqrestore(&up->port.lock, flags); | |
363 | ||
364 | if (tty) | |
365 | tty_flip_buffer_push(tty); | |
366 | ||
367 | return IRQ_HANDLED; | |
368 | } | |
369 | ||
370 | /* port->lock is not held. */ | |
371 | static unsigned int sunsab_tx_empty(struct uart_port *port) | |
372 | { | |
373 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
374 | int ret; | |
375 | ||
376 | /* Do not need a lock for a state test like this. */ | |
377 | if (test_bit(SAB82532_ALLS, &up->irqflags)) | |
378 | ret = TIOCSER_TEMT; | |
379 | else | |
380 | ret = 0; | |
381 | ||
382 | return ret; | |
383 | } | |
384 | ||
385 | /* port->lock held by caller. */ | |
386 | static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
387 | { | |
388 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
389 | ||
390 | if (mctrl & TIOCM_RTS) { | |
e4fdee8e DM |
391 | up->cached_mode &= ~SAB82532_MODE_FRTS; |
392 | up->cached_mode |= SAB82532_MODE_RTS; | |
1da177e4 | 393 | } else { |
e4fdee8e DM |
394 | up->cached_mode |= (SAB82532_MODE_FRTS | |
395 | SAB82532_MODE_RTS); | |
1da177e4 LT |
396 | } |
397 | if (mctrl & TIOCM_DTR) { | |
e4fdee8e | 398 | up->cached_pvr &= ~(up->pvr_dtr_bit); |
1da177e4 | 399 | } else { |
e4fdee8e | 400 | up->cached_pvr |= up->pvr_dtr_bit; |
1da177e4 | 401 | } |
e4fdee8e DM |
402 | |
403 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
404 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
405 | sunsab_tx_idle(up); | |
1da177e4 LT |
406 | } |
407 | ||
c5f4644e | 408 | /* port->lock is held by caller and interrupts are disabled. */ |
1da177e4 LT |
409 | static unsigned int sunsab_get_mctrl(struct uart_port *port) |
410 | { | |
411 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
1da177e4 LT |
412 | unsigned char val; |
413 | unsigned int result; | |
414 | ||
415 | result = 0; | |
416 | ||
1da177e4 LT |
417 | val = readb(&up->regs->r.pvr); |
418 | result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; | |
419 | ||
420 | val = readb(&up->regs->r.vstr); | |
421 | result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; | |
422 | ||
423 | val = readb(&up->regs->r.star); | |
424 | result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; | |
425 | ||
1da177e4 LT |
426 | return result; |
427 | } | |
428 | ||
429 | /* port->lock held by caller. */ | |
b129a8cc | 430 | static void sunsab_stop_tx(struct uart_port *port) |
1da177e4 LT |
431 | { |
432 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
433 | ||
434 | up->interrupt_mask1 |= SAB82532_IMR1_XPR; | |
435 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
436 | } | |
437 | ||
e4fdee8e DM |
438 | /* port->lock held by caller. */ |
439 | static void sunsab_tx_idle(struct uart_sunsab_port *up) | |
440 | { | |
441 | if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { | |
442 | u8 tmp; | |
443 | ||
444 | clear_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
445 | writeb(up->cached_mode, &up->regs->rw.mode); | |
446 | writeb(up->cached_pvr, &up->regs->rw.pvr); | |
447 | writeb(up->cached_dafo, &up->regs->w.dafo); | |
448 | ||
449 | writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); | |
450 | tmp = readb(&up->regs->rw.ccr2); | |
451 | tmp &= ~0xc0; | |
452 | tmp |= (up->cached_ebrg >> 2) & 0xc0; | |
453 | writeb(tmp, &up->regs->rw.ccr2); | |
454 | } | |
455 | } | |
456 | ||
1da177e4 | 457 | /* port->lock held by caller. */ |
b129a8cc | 458 | static void sunsab_start_tx(struct uart_port *port) |
1da177e4 LT |
459 | { |
460 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
461 | struct circ_buf *xmit = &up->port.info->xmit; | |
462 | int i; | |
463 | ||
464 | up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); | |
465 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
466 | ||
467 | if (!test_bit(SAB82532_XPR, &up->irqflags)) | |
468 | return; | |
469 | ||
470 | clear_bit(SAB82532_ALLS, &up->irqflags); | |
471 | clear_bit(SAB82532_XPR, &up->irqflags); | |
472 | ||
473 | for (i = 0; i < up->port.fifosize; i++) { | |
474 | writeb(xmit->buf[xmit->tail], | |
475 | &up->regs->w.xfifo[i]); | |
476 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
477 | up->port.icount.tx++; | |
478 | if (uart_circ_empty(xmit)) | |
479 | break; | |
480 | } | |
481 | ||
482 | /* Issue a Transmit Frame command. */ | |
483 | sunsab_cec_wait(up); | |
484 | writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); | |
485 | } | |
486 | ||
487 | /* port->lock is not held. */ | |
488 | static void sunsab_send_xchar(struct uart_port *port, char ch) | |
489 | { | |
490 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
491 | unsigned long flags; | |
492 | ||
493 | spin_lock_irqsave(&up->port.lock, flags); | |
494 | ||
495 | sunsab_tec_wait(up); | |
496 | writeb(ch, &up->regs->w.tic); | |
497 | ||
498 | spin_unlock_irqrestore(&up->port.lock, flags); | |
499 | } | |
500 | ||
501 | /* port->lock held by caller. */ | |
502 | static void sunsab_stop_rx(struct uart_port *port) | |
503 | { | |
504 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
505 | ||
506 | up->interrupt_mask0 |= SAB82532_ISR0_TCD; | |
507 | writeb(up->interrupt_mask1, &up->regs->w.imr0); | |
508 | } | |
509 | ||
510 | /* port->lock held by caller. */ | |
511 | static void sunsab_enable_ms(struct uart_port *port) | |
512 | { | |
513 | /* For now we always receive these interrupts. */ | |
514 | } | |
515 | ||
516 | /* port->lock is not held. */ | |
517 | static void sunsab_break_ctl(struct uart_port *port, int break_state) | |
518 | { | |
519 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
520 | unsigned long flags; | |
521 | unsigned char val; | |
522 | ||
523 | spin_lock_irqsave(&up->port.lock, flags); | |
524 | ||
e4fdee8e | 525 | val = up->cached_dafo; |
1da177e4 LT |
526 | if (break_state) |
527 | val |= SAB82532_DAFO_XBRK; | |
528 | else | |
529 | val &= ~SAB82532_DAFO_XBRK; | |
e4fdee8e DM |
530 | up->cached_dafo = val; |
531 | ||
532 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
533 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
534 | sunsab_tx_idle(up); | |
1da177e4 LT |
535 | |
536 | spin_unlock_irqrestore(&up->port.lock, flags); | |
537 | } | |
538 | ||
539 | /* port->lock is not held. */ | |
540 | static int sunsab_startup(struct uart_port *port) | |
541 | { | |
542 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
543 | unsigned long flags; | |
544 | unsigned char tmp; | |
545 | ||
546 | spin_lock_irqsave(&up->port.lock, flags); | |
547 | ||
548 | /* | |
549 | * Wait for any commands or immediate characters | |
550 | */ | |
551 | sunsab_cec_wait(up); | |
552 | sunsab_tec_wait(up); | |
553 | ||
554 | /* | |
555 | * Clear the FIFO buffers. | |
556 | */ | |
557 | writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); | |
558 | sunsab_cec_wait(up); | |
559 | writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); | |
560 | ||
561 | /* | |
562 | * Clear the interrupt registers. | |
563 | */ | |
564 | (void) readb(&up->regs->r.isr0); | |
565 | (void) readb(&up->regs->r.isr1); | |
566 | ||
567 | /* | |
568 | * Now, initialize the UART | |
569 | */ | |
570 | writeb(0, &up->regs->w.ccr0); /* power-down */ | |
571 | writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | | |
572 | SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); | |
573 | writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); | |
574 | writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | | |
575 | SAB82532_CCR2_TOE, &up->regs->w.ccr2); | |
576 | writeb(0, &up->regs->w.ccr3); | |
577 | writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); | |
e4fdee8e DM |
578 | up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | |
579 | SAB82532_MODE_RAC); | |
580 | writeb(up->cached_mode, &up->regs->w.mode); | |
1da177e4 LT |
581 | writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); |
582 | ||
583 | tmp = readb(&up->regs->rw.ccr0); | |
584 | tmp |= SAB82532_CCR0_PU; /* power-up */ | |
585 | writeb(tmp, &up->regs->rw.ccr0); | |
586 | ||
587 | /* | |
588 | * Finally, enable interrupts | |
589 | */ | |
590 | up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | | |
591 | SAB82532_IMR0_PLLA); | |
592 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
593 | up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | | |
594 | SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | | |
595 | SAB82532_IMR1_CSC | SAB82532_IMR1_XON | | |
596 | SAB82532_IMR1_XPR); | |
597 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
598 | set_bit(SAB82532_ALLS, &up->irqflags); | |
599 | set_bit(SAB82532_XPR, &up->irqflags); | |
600 | ||
601 | spin_unlock_irqrestore(&up->port.lock, flags); | |
602 | ||
603 | return 0; | |
604 | } | |
605 | ||
606 | /* port->lock is not held. */ | |
607 | static void sunsab_shutdown(struct uart_port *port) | |
608 | { | |
609 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
610 | unsigned long flags; | |
1da177e4 LT |
611 | |
612 | spin_lock_irqsave(&up->port.lock, flags); | |
613 | ||
614 | /* Disable Interrupts */ | |
615 | up->interrupt_mask0 = 0xff; | |
616 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
617 | up->interrupt_mask1 = 0xff; | |
618 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
619 | ||
620 | /* Disable break condition */ | |
e4fdee8e DM |
621 | up->cached_dafo = readb(&up->regs->rw.dafo); |
622 | up->cached_dafo &= ~SAB82532_DAFO_XBRK; | |
623 | writeb(up->cached_dafo, &up->regs->rw.dafo); | |
1da177e4 LT |
624 | |
625 | /* Disable Receiver */ | |
e4fdee8e DM |
626 | up->cached_mode &= ~SAB82532_MODE_RAC; |
627 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1da177e4 LT |
628 | |
629 | /* | |
630 | * XXX FIXME | |
631 | * | |
632 | * If the chip is powered down here the system hangs/crashes during | |
633 | * reboot or shutdown. This needs to be investigated further, | |
634 | * similar behaviour occurs in 2.4 when the driver is configured | |
635 | * as a module only. One hint may be that data is sometimes | |
636 | * transmitted at 9600 baud during shutdown (regardless of the | |
637 | * speed the chip was configured for when the port was open). | |
638 | */ | |
639 | #if 0 | |
640 | /* Power Down */ | |
641 | tmp = readb(&up->regs->rw.ccr0); | |
642 | tmp &= ~SAB82532_CCR0_PU; | |
643 | writeb(tmp, &up->regs->rw.ccr0); | |
644 | #endif | |
645 | ||
646 | spin_unlock_irqrestore(&up->port.lock, flags); | |
647 | } | |
648 | ||
649 | /* | |
650 | * This is used to figure out the divisor speeds. | |
651 | * | |
652 | * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), | |
653 | * | |
654 | * with 0 <= N < 64 and 0 <= M < 16 | |
655 | */ | |
656 | ||
657 | static void calc_ebrg(int baud, int *n_ret, int *m_ret) | |
658 | { | |
659 | int n, m; | |
660 | ||
661 | if (baud == 0) { | |
662 | *n_ret = 0; | |
663 | *m_ret = 0; | |
664 | return; | |
665 | } | |
666 | ||
667 | /* | |
668 | * We scale numbers by 10 so that we get better accuracy | |
669 | * without having to use floating point. Here we increment m | |
670 | * until n is within the valid range. | |
671 | */ | |
672 | n = (SAB_BASE_BAUD * 10) / baud; | |
673 | m = 0; | |
674 | while (n >= 640) { | |
675 | n = n / 2; | |
676 | m++; | |
677 | } | |
678 | n = (n+5) / 10; | |
679 | /* | |
680 | * We try very hard to avoid speeds with M == 0 since they may | |
681 | * not work correctly for XTAL frequences above 10 MHz. | |
682 | */ | |
683 | if ((m == 0) && ((n & 1) == 0)) { | |
684 | n = n / 2; | |
685 | m++; | |
686 | } | |
687 | *n_ret = n - 1; | |
688 | *m_ret = m; | |
689 | } | |
690 | ||
691 | /* Internal routine, port->lock is held and local interrupts are disabled. */ | |
692 | static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, | |
b179fb8c DM |
693 | unsigned int iflag, unsigned int baud, |
694 | unsigned int quot) | |
1da177e4 | 695 | { |
1da177e4 LT |
696 | unsigned char dafo; |
697 | int bits, n, m; | |
698 | ||
699 | /* Byte size and parity */ | |
700 | switch (cflag & CSIZE) { | |
701 | case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; | |
702 | case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; | |
703 | case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; | |
704 | case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; | |
705 | /* Never happens, but GCC is too dumb to figure it out */ | |
706 | default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; | |
707 | } | |
708 | ||
709 | if (cflag & CSTOPB) { | |
710 | dafo |= SAB82532_DAFO_STOP; | |
711 | bits++; | |
712 | } | |
713 | ||
714 | if (cflag & PARENB) { | |
715 | dafo |= SAB82532_DAFO_PARE; | |
716 | bits++; | |
717 | } | |
718 | ||
719 | if (cflag & PARODD) { | |
720 | dafo |= SAB82532_DAFO_PAR_ODD; | |
721 | } else { | |
722 | dafo |= SAB82532_DAFO_PAR_EVEN; | |
723 | } | |
e4fdee8e | 724 | up->cached_dafo = dafo; |
1da177e4 LT |
725 | |
726 | calc_ebrg(baud, &n, &m); | |
727 | ||
e4fdee8e | 728 | up->cached_ebrg = n | (m << 6); |
1da177e4 LT |
729 | |
730 | up->tec_timeout = (10 * 1000000) / baud; | |
731 | up->cec_timeout = up->tec_timeout >> 2; | |
732 | ||
733 | /* CTS flow control flags */ | |
734 | /* We encode read_status_mask and ignore_status_mask like so: | |
735 | * | |
736 | * --------------------- | |
737 | * | ... | ISR1 | ISR0 | | |
738 | * --------------------- | |
739 | * .. 15 8 7 0 | |
740 | */ | |
741 | ||
742 | up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | | |
743 | SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | | |
744 | SAB82532_ISR0_CDSC); | |
745 | up->port.read_status_mask |= (SAB82532_ISR1_CSC | | |
746 | SAB82532_ISR1_ALLS | | |
747 | SAB82532_ISR1_XPR) << 8; | |
748 | if (iflag & INPCK) | |
749 | up->port.read_status_mask |= (SAB82532_ISR0_PERR | | |
750 | SAB82532_ISR0_FERR); | |
751 | if (iflag & (BRKINT | PARMRK)) | |
752 | up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); | |
753 | ||
754 | /* | |
755 | * Characteres to ignore | |
756 | */ | |
757 | up->port.ignore_status_mask = 0; | |
758 | if (iflag & IGNPAR) | |
759 | up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | | |
760 | SAB82532_ISR0_FERR); | |
761 | if (iflag & IGNBRK) { | |
762 | up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); | |
763 | /* | |
764 | * If we're ignoring parity and break indicators, | |
765 | * ignore overruns too (for real raw support). | |
766 | */ | |
767 | if (iflag & IGNPAR) | |
768 | up->port.ignore_status_mask |= SAB82532_ISR0_RFO; | |
769 | } | |
770 | ||
771 | /* | |
772 | * ignore all characters if CREAD is not set | |
773 | */ | |
774 | if ((cflag & CREAD) == 0) | |
775 | up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | | |
776 | SAB82532_ISR0_TCD); | |
777 | ||
b179fb8c DM |
778 | uart_update_timeout(&up->port, cflag, |
779 | (up->port.uartclk / (16 * quot))); | |
780 | ||
e4fdee8e DM |
781 | /* Now schedule a register update when the chip's |
782 | * transmitter is idle. | |
783 | */ | |
784 | up->cached_mode |= SAB82532_MODE_RAC; | |
785 | set_bit(SAB82532_REGS_PENDING, &up->irqflags); | |
786 | if (test_bit(SAB82532_XPR, &up->irqflags)) | |
787 | sunsab_tx_idle(up); | |
1da177e4 LT |
788 | } |
789 | ||
790 | /* port->lock is not held. */ | |
791 | static void sunsab_set_termios(struct uart_port *port, struct termios *termios, | |
792 | struct termios *old) | |
793 | { | |
794 | struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; | |
795 | unsigned long flags; | |
b179fb8c DM |
796 | unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); |
797 | unsigned int quot = uart_get_divisor(port, baud); | |
1da177e4 LT |
798 | |
799 | spin_lock_irqsave(&up->port.lock, flags); | |
b179fb8c | 800 | sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); |
1da177e4 LT |
801 | spin_unlock_irqrestore(&up->port.lock, flags); |
802 | } | |
803 | ||
804 | static const char *sunsab_type(struct uart_port *port) | |
805 | { | |
806 | struct uart_sunsab_port *up = (void *)port; | |
807 | static char buf[36]; | |
808 | ||
809 | sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); | |
810 | return buf; | |
811 | } | |
812 | ||
813 | static void sunsab_release_port(struct uart_port *port) | |
814 | { | |
815 | } | |
816 | ||
817 | static int sunsab_request_port(struct uart_port *port) | |
818 | { | |
819 | return 0; | |
820 | } | |
821 | ||
822 | static void sunsab_config_port(struct uart_port *port, int flags) | |
823 | { | |
824 | } | |
825 | ||
826 | static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) | |
827 | { | |
828 | return -EINVAL; | |
829 | } | |
830 | ||
831 | static struct uart_ops sunsab_pops = { | |
832 | .tx_empty = sunsab_tx_empty, | |
833 | .set_mctrl = sunsab_set_mctrl, | |
834 | .get_mctrl = sunsab_get_mctrl, | |
835 | .stop_tx = sunsab_stop_tx, | |
836 | .start_tx = sunsab_start_tx, | |
837 | .send_xchar = sunsab_send_xchar, | |
838 | .stop_rx = sunsab_stop_rx, | |
839 | .enable_ms = sunsab_enable_ms, | |
840 | .break_ctl = sunsab_break_ctl, | |
841 | .startup = sunsab_startup, | |
842 | .shutdown = sunsab_shutdown, | |
843 | .set_termios = sunsab_set_termios, | |
844 | .type = sunsab_type, | |
845 | .release_port = sunsab_release_port, | |
846 | .request_port = sunsab_request_port, | |
847 | .config_port = sunsab_config_port, | |
848 | .verify_port = sunsab_verify_port, | |
849 | }; | |
850 | ||
851 | static struct uart_driver sunsab_reg = { | |
852 | .owner = THIS_MODULE, | |
853 | .driver_name = "serial", | |
854 | .devfs_name = "tts/", | |
855 | .dev_name = "ttyS", | |
856 | .major = TTY_MAJOR, | |
857 | }; | |
858 | ||
859 | static struct uart_sunsab_port *sunsab_ports; | |
860 | static int num_channels; | |
861 | ||
862 | #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE | |
863 | ||
864 | static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c) | |
865 | { | |
866 | unsigned long flags; | |
867 | ||
868 | spin_lock_irqsave(&up->port.lock, flags); | |
869 | ||
870 | sunsab_tec_wait(up); | |
871 | writeb(c, &up->regs->w.tic); | |
872 | ||
873 | spin_unlock_irqrestore(&up->port.lock, flags); | |
874 | } | |
875 | ||
876 | static void sunsab_console_write(struct console *con, const char *s, unsigned n) | |
877 | { | |
878 | struct uart_sunsab_port *up = &sunsab_ports[con->index]; | |
879 | int i; | |
880 | ||
881 | for (i = 0; i < n; i++) { | |
882 | if (*s == '\n') | |
883 | sunsab_console_putchar(up, '\r'); | |
884 | sunsab_console_putchar(up, *s++); | |
885 | } | |
886 | sunsab_tec_wait(up); | |
887 | } | |
888 | ||
889 | static int sunsab_console_setup(struct console *con, char *options) | |
890 | { | |
891 | struct uart_sunsab_port *up = &sunsab_ports[con->index]; | |
892 | unsigned long flags; | |
b179fb8c | 893 | unsigned int baud, quot; |
1da177e4 LT |
894 | |
895 | printk("Console: ttyS%d (SAB82532)\n", | |
896 | (sunsab_reg.minor - 64) + con->index); | |
897 | ||
898 | sunserial_console_termios(con); | |
899 | ||
1da177e4 LT |
900 | switch (con->cflag & CBAUD) { |
901 | case B150: baud = 150; break; | |
902 | case B300: baud = 300; break; | |
903 | case B600: baud = 600; break; | |
904 | case B1200: baud = 1200; break; | |
905 | case B2400: baud = 2400; break; | |
906 | case B4800: baud = 4800; break; | |
907 | default: case B9600: baud = 9600; break; | |
908 | case B19200: baud = 19200; break; | |
909 | case B38400: baud = 38400; break; | |
c126cf80 ED |
910 | case B57600: baud = 57600; break; |
911 | case B115200: baud = 115200; break; | |
912 | case B230400: baud = 230400; break; | |
913 | case B460800: baud = 460800; break; | |
1da177e4 LT |
914 | }; |
915 | ||
916 | /* | |
917 | * Temporary fix. | |
918 | */ | |
919 | spin_lock_init(&up->port.lock); | |
920 | ||
921 | /* | |
922 | * Initialize the hardware | |
923 | */ | |
924 | sunsab_startup(&up->port); | |
925 | ||
926 | spin_lock_irqsave(&up->port.lock, flags); | |
927 | ||
928 | /* | |
929 | * Finally, enable interrupts | |
930 | */ | |
931 | up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | | |
932 | SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; | |
933 | writeb(up->interrupt_mask0, &up->regs->w.imr0); | |
934 | up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | | |
935 | SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | | |
936 | SAB82532_IMR1_CSC | SAB82532_IMR1_XON | | |
937 | SAB82532_IMR1_XPR; | |
938 | writeb(up->interrupt_mask1, &up->regs->w.imr1); | |
939 | ||
b179fb8c DM |
940 | quot = uart_get_divisor(&up->port, baud); |
941 | sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); | |
1da177e4 LT |
942 | sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); |
943 | ||
944 | spin_unlock_irqrestore(&up->port.lock, flags); | |
945 | ||
946 | return 0; | |
947 | } | |
948 | ||
949 | static struct console sunsab_console = { | |
950 | .name = "ttyS", | |
951 | .write = sunsab_console_write, | |
952 | .device = uart_console_device, | |
953 | .setup = sunsab_console_setup, | |
954 | .flags = CON_PRINTBUFFER, | |
955 | .index = -1, | |
956 | .data = &sunsab_reg, | |
957 | }; | |
958 | #define SUNSAB_CONSOLE (&sunsab_console) | |
959 | ||
960 | static void __init sunsab_console_init(void) | |
961 | { | |
962 | int i; | |
963 | ||
964 | if (con_is_present()) | |
965 | return; | |
966 | ||
967 | for (i = 0; i < num_channels; i++) { | |
968 | int this_minor = sunsab_reg.minor + i; | |
969 | ||
970 | if ((this_minor - 64) == (serial_console - 1)) | |
971 | break; | |
972 | } | |
973 | if (i == num_channels) | |
974 | return; | |
975 | ||
976 | sunsab_console.index = i; | |
977 | register_console(&sunsab_console); | |
978 | } | |
979 | #else | |
980 | #define SUNSAB_CONSOLE (NULL) | |
981 | #define sunsab_console_init() do { } while (0) | |
982 | #endif | |
983 | ||
984 | static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg) | |
985 | { | |
986 | struct linux_ebus *ebus; | |
987 | struct linux_ebus_device *edev = NULL; | |
988 | ||
989 | for_each_ebus(ebus) { | |
990 | for_each_ebusdev(edev, ebus) { | |
991 | if (!strcmp(edev->prom_name, "se")) { | |
992 | callback(edev, arg); | |
993 | continue; | |
994 | } else if (!strcmp(edev->prom_name, "serial")) { | |
995 | char compat[32]; | |
996 | int clen; | |
997 | ||
998 | /* On RIO this can be an SE, check it. We could | |
999 | * just check ebus->is_rio, but this is more portable. | |
1000 | */ | |
1001 | clen = prom_getproperty(edev->prom_node, "compatible", | |
1002 | compat, sizeof(compat)); | |
1003 | if (clen > 0) { | |
1004 | if (strncmp(compat, "sab82532", 8) == 0) { | |
1005 | callback(edev, arg); | |
1006 | continue; | |
1007 | } | |
1008 | } | |
1009 | } | |
1010 | } | |
1011 | } | |
1012 | } | |
1013 | ||
1014 | static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg) | |
1015 | { | |
1016 | int *count_p = arg; | |
1017 | ||
1018 | (*count_p)++; | |
1019 | } | |
1020 | ||
1021 | static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg) | |
1022 | { | |
1023 | int *instance_p = arg; | |
1024 | struct uart_sunsab_port *up; | |
1025 | unsigned long regs, offset; | |
1026 | int i; | |
1027 | ||
1028 | /* Note: ports are located in reverse order */ | |
1029 | regs = edev->resource[0].start; | |
1030 | offset = sizeof(union sab82532_async_regs); | |
1031 | for (i = 0; i < 2; i++) { | |
1032 | up = &sunsab_ports[(*instance_p * 2) + 1 - i]; | |
1033 | ||
1034 | memset(up, 0, sizeof(*up)); | |
1035 | up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs)); | |
1036 | up->port.irq = edev->irqs[0]; | |
1037 | up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; | |
1038 | up->port.mapbase = (unsigned long)up->regs; | |
9b4a1617 | 1039 | up->port.iotype = UPIO_MEM; |
1da177e4 LT |
1040 | |
1041 | writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); | |
1042 | ||
1043 | offset -= sizeof(union sab82532_async_regs); | |
1044 | } | |
1045 | ||
1046 | (*instance_p)++; | |
1047 | } | |
1048 | ||
1049 | static int __init probe_for_sabs(void) | |
1050 | { | |
1051 | int this_sab = 0; | |
1052 | ||
1053 | /* Find device instances. */ | |
1054 | for_each_sab_edev(&sab_count_callback, &this_sab); | |
1055 | if (!this_sab) | |
1056 | return -ENODEV; | |
1057 | ||
1058 | /* Allocate tables. */ | |
1059 | sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2, | |
1060 | GFP_KERNEL); | |
1061 | if (!sunsab_ports) | |
1062 | return -ENOMEM; | |
1063 | ||
1064 | num_channels = this_sab * 2; | |
1065 | ||
1066 | this_sab = 0; | |
1067 | for_each_sab_edev(&sab_attach_callback, &this_sab); | |
1068 | return 0; | |
1069 | } | |
1070 | ||
1071 | static void __init sunsab_init_hw(void) | |
1072 | { | |
1073 | int i; | |
1074 | ||
1075 | for (i = 0; i < num_channels; i++) { | |
1076 | struct uart_sunsab_port *up = &sunsab_ports[i]; | |
1077 | ||
1078 | up->port.line = i; | |
1079 | up->port.ops = &sunsab_pops; | |
1080 | up->port.type = PORT_SUNSAB; | |
1081 | up->port.uartclk = SAB_BASE_BAUD; | |
1082 | ||
1083 | up->type = readb(&up->regs->r.vstr) & 0x0f; | |
1084 | writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); | |
1085 | writeb(0xff, &up->regs->w.pim); | |
1086 | if (up->port.line == 0) { | |
1087 | up->pvr_dsr_bit = (1 << 0); | |
1088 | up->pvr_dtr_bit = (1 << 1); | |
1089 | } else { | |
1090 | up->pvr_dsr_bit = (1 << 3); | |
1091 | up->pvr_dtr_bit = (1 << 2); | |
1092 | } | |
e4fdee8e DM |
1093 | up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); |
1094 | writeb(up->cached_pvr, &up->regs->w.pvr); | |
1095 | up->cached_mode = readb(&up->regs->rw.mode); | |
1096 | up->cached_mode |= SAB82532_MODE_FRTS; | |
1097 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1098 | up->cached_mode |= SAB82532_MODE_RTS; | |
1099 | writeb(up->cached_mode, &up->regs->rw.mode); | |
1da177e4 LT |
1100 | |
1101 | up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; | |
1102 | up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; | |
1103 | ||
1104 | if (!(up->port.line & 0x01)) { | |
1105 | if (request_irq(up->port.irq, sunsab_interrupt, | |
1106 | SA_SHIRQ, "serial(sab82532)", up)) { | |
1107 | printk("sunsab%d: can't get IRQ %x\n", | |
1108 | i, up->port.irq); | |
1109 | continue; | |
1110 | } | |
1111 | } | |
1112 | } | |
1113 | } | |
1114 | ||
1115 | static int __init sunsab_init(void) | |
1116 | { | |
1117 | int ret = probe_for_sabs(); | |
1118 | int i; | |
1119 | ||
1120 | if (ret < 0) | |
1121 | return ret; | |
1122 | ||
1123 | sunsab_init_hw(); | |
1124 | ||
1125 | sunsab_reg.minor = sunserial_current_minor; | |
1126 | sunsab_reg.nr = num_channels; | |
1127 | sunsab_reg.cons = SUNSAB_CONSOLE; | |
1128 | ||
1129 | ret = uart_register_driver(&sunsab_reg); | |
1130 | if (ret < 0) { | |
1131 | int i; | |
1132 | ||
1133 | for (i = 0; i < num_channels; i++) { | |
1134 | struct uart_sunsab_port *up = &sunsab_ports[i]; | |
1135 | ||
1136 | if (!(up->port.line & 0x01)) | |
1137 | free_irq(up->port.irq, up); | |
1138 | iounmap(up->regs); | |
1139 | } | |
1140 | kfree(sunsab_ports); | |
1141 | sunsab_ports = NULL; | |
1142 | ||
1143 | return ret; | |
1144 | } | |
1145 | ||
1146 | sunserial_current_minor += num_channels; | |
1147 | ||
1148 | sunsab_console_init(); | |
1149 | ||
1150 | for (i = 0; i < num_channels; i++) { | |
1151 | struct uart_sunsab_port *up = &sunsab_ports[i]; | |
1152 | ||
1153 | uart_add_one_port(&sunsab_reg, &up->port); | |
1154 | } | |
1155 | ||
1156 | return 0; | |
1157 | } | |
1158 | ||
1159 | static void __exit sunsab_exit(void) | |
1160 | { | |
1161 | int i; | |
1162 | ||
1163 | for (i = 0; i < num_channels; i++) { | |
1164 | struct uart_sunsab_port *up = &sunsab_ports[i]; | |
1165 | ||
1166 | uart_remove_one_port(&sunsab_reg, &up->port); | |
1167 | ||
1168 | if (!(up->port.line & 0x01)) | |
1169 | free_irq(up->port.irq, up); | |
1170 | iounmap(up->regs); | |
1171 | } | |
1172 | ||
1173 | sunserial_current_minor -= num_channels; | |
1174 | uart_unregister_driver(&sunsab_reg); | |
1175 | ||
1176 | kfree(sunsab_ports); | |
1177 | sunsab_ports = NULL; | |
1178 | } | |
1179 | ||
1180 | module_init(sunsab_init); | |
1181 | module_exit(sunsab_exit); | |
1182 | ||
1183 | MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); | |
1184 | MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); | |
1185 | MODULE_LICENSE("GPL"); |