]>
Commit | Line | Data |
---|---|---|
8ae12a0d DB |
1 | # |
2 | # SPI driver configuration | |
3 | # | |
4 | # NOTE: the reason this doesn't show SPI slave support is mostly that | |
5 | # nobody's needed a slave side API yet. The master-role API is not | |
6 | # fully appropriate there, so it'd need some thought to do well. | |
7 | # | |
79d8c7a8 | 8 | menuconfig SPI |
8ae12a0d | 9 | bool "SPI support" |
79d8c7a8 | 10 | depends on HAS_IOMEM |
8ae12a0d DB |
11 | help |
12 | The "Serial Peripheral Interface" is a low level synchronous | |
13 | protocol. Chips that support SPI can have data transfer rates | |
14 | up to several tens of Mbit/sec. Chips are addressed with a | |
15 | controller and a chipselect. Most SPI slaves don't support | |
16 | dynamic device discovery; some are even write-only or read-only. | |
17 | ||
3cb2fccc | 18 | SPI is widely used by microcontrollers to talk with sensors, |
8ae12a0d DB |
19 | eeprom and flash memory, codecs and various other controller |
20 | chips, analog to digital (and d-to-a) converters, and more. | |
21 | MMC and SD cards can be accessed using SPI protocol; and for | |
22 | DataFlash cards used in MMC sockets, SPI must always be used. | |
23 | ||
24 | SPI is one of a family of similar protocols using a four wire | |
25 | interface (select, clock, data in, data out) including Microwire | |
26 | (half duplex), SSP, SSI, and PSP. This driver framework should | |
27 | work with most such devices and controllers. | |
28 | ||
79d8c7a8 AG |
29 | if SPI |
30 | ||
8ae12a0d DB |
31 | config SPI_DEBUG |
32 | boolean "Debug support for SPI drivers" | |
79d8c7a8 | 33 | depends on DEBUG_KERNEL |
8ae12a0d DB |
34 | help |
35 | Say "yes" to enable debug messaging (like dev_dbg and pr_debug), | |
36 | sysfs, and debugfs support in SPI controller and protocol drivers. | |
37 | ||
38 | # | |
39 | # MASTER side ... talking to discrete SPI slave chips including microcontrollers | |
40 | # | |
41 | ||
42 | config SPI_MASTER | |
43 | # boolean "SPI Master Support" | |
44 | boolean | |
45 | default SPI | |
46 | help | |
47 | If your system has an master-capable SPI controller (which | |
48 | provides the clock and chipselect), you can enable that | |
49 | controller and the protocol drivers for the SPI slave chips | |
50 | that are connected. | |
51 | ||
6291fe2a RD |
52 | if SPI_MASTER |
53 | ||
8ae12a0d | 54 | comment "SPI Master Controller Drivers" |
8ae12a0d | 55 | |
0b782531 TC |
56 | config SPI_ALTERA |
57 | tristate "Altera SPI Controller" | |
58 | select SPI_BITBANG | |
59 | help | |
60 | This is the driver for the Altera SPI Controller. | |
61 | ||
8efaef4d GJ |
62 | config SPI_ATH79 |
63 | tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" | |
64 | depends on ATH79 && GENERIC_GPIO | |
65 | select SPI_BITBANG | |
66 | help | |
67 | This enables support for the SPI controller present on the | |
68 | Atheros AR71XX/AR724X/AR913X SoCs. | |
69 | ||
754ce4f2 HS |
70 | config SPI_ATMEL |
71 | tristate "Atmel SPI Controller" | |
6291fe2a | 72 | depends on (ARCH_AT91 || AVR32) |
754ce4f2 HS |
73 | help |
74 | This selects a driver for the Atmel SPI Controller, present on | |
75 | many AT32 (AVR32) and AT91 (ARM) chips. | |
76 | ||
a5f6abd4 WB |
77 | config SPI_BFIN |
78 | tristate "SPI controller driver for ADI Blackfin5xx" | |
6291fe2a | 79 | depends on BLACKFIN |
a5f6abd4 WB |
80 | help |
81 | This is the SPI controller master driver for Blackfin 5xx processor. | |
82 | ||
9c3e7375 CC |
83 | config SPI_BFIN_SPORT |
84 | tristate "SPI bus via Blackfin SPORT" | |
85 | depends on BLACKFIN | |
86 | help | |
87 | Enable support for a SPI bus via the Blackfin SPORT peripheral. | |
88 | ||
63bd2359 JN |
89 | config SPI_AU1550 |
90 | tristate "Au1550/Au12x0 SPI Controller" | |
37663860 | 91 | depends on MIPS_ALCHEMY && EXPERIMENTAL |
63bd2359 JN |
92 | select SPI_BITBANG |
93 | help | |
94 | If you say yes to this option, support will be included for the | |
95 | Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). | |
96 | ||
9904f22a | 97 | config SPI_BITBANG |
d29389de | 98 | tristate "Utilities for Bitbanging SPI masters" |
9904f22a DB |
99 | help |
100 | With a few GPIO pins, your system can bitbang the SPI protocol. | |
101 | Select this to get SPI support through I/O pins (GPIO, parallel | |
102 | port, etc). Or, some systems' SPI master controller drivers use | |
103 | this code to manage the per-word or per-transfer accesses to the | |
104 | hardware shift registers. | |
105 | ||
106 | This is library code, and is automatically selected by drivers that | |
107 | need it. You only need to select this explicitly to support driver | |
108 | modules that aren't part of this kernel tree. | |
8ae12a0d | 109 | |
7111763d DB |
110 | config SPI_BUTTERFLY |
111 | tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" | |
6291fe2a | 112 | depends on PARPORT |
7111763d DB |
113 | select SPI_BITBANG |
114 | help | |
115 | This uses a custom parallel port cable to connect to an AVR | |
116 | Butterfly <http://www.atmel.com/products/avr/butterfly>, an | |
117 | inexpensive battery powered microcontroller evaluation board. | |
118 | This same cable can be used to flash new firmware. | |
119 | ||
34b8c661 SK |
120 | config SPI_COLDFIRE_QSPI |
121 | tristate "Freescale Coldfire QSPI controller" | |
122 | depends on (M520x || M523x || M5249 || M527x || M528x || M532x) | |
123 | help | |
124 | This enables support for the Coldfire QSPI controller in master | |
125 | mode. | |
126 | ||
358934a6 | 127 | config SPI_DAVINCI |
23ce17ad | 128 | tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" |
358934a6 SP |
129 | depends on SPI_MASTER && ARCH_DAVINCI |
130 | select SPI_BITBANG | |
131 | help | |
23ce17ad SN |
132 | SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. |
133 | ||
011f23a3 MW |
134 | config SPI_EP93XX |
135 | tristate "Cirrus Logic EP93xx SPI controller" | |
136 | depends on ARCH_EP93XX | |
137 | help | |
138 | This enables using the Cirrus EP93xx SPI controller in master | |
139 | mode. | |
140 | ||
d29389de DB |
141 | config SPI_GPIO |
142 | tristate "GPIO-based bitbanging SPI Master" | |
143 | depends on GENERIC_GPIO | |
144 | select SPI_BITBANG | |
145 | help | |
146 | This simple GPIO bitbanging SPI master uses the arch-neutral GPIO | |
147 | interface to manage MOSI, MISO, SCK, and chipselect signals. SPI | |
148 | slaves connected to a bus using this driver are configured as usual, | |
149 | except that the spi_board_info.controller_data holds the GPIO number | |
150 | for the chipselect used by this controller driver. | |
151 | ||
152 | Note that this driver often won't achieve even 1 Mbit/sec speeds, | |
153 | making it unusually slow for SPI. If your platform can inline | |
154 | GPIO operations, you should be able to leverage that for better | |
155 | speed with a custom version of this driver; see the source code. | |
156 | ||
b5f3294f SH |
157 | config SPI_IMX |
158 | tristate "Freescale i.MX SPI controllers" | |
159 | depends on ARCH_MXC | |
160 | select SPI_BITBANG | |
e89524d3 | 161 | default m if IMX_HAVE_PLATFORM_SPI_IMX |
b5f3294f SH |
162 | help |
163 | This enables using the Freescale i.MX SPI controllers in master | |
164 | mode. | |
165 | ||
78961a57 KB |
166 | config SPI_LM70_LLP |
167 | tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" | |
6291fe2a | 168 | depends on PARPORT && EXPERIMENTAL |
78961a57 KB |
169 | select SPI_BITBANG |
170 | help | |
171 | This driver supports the NS LM70 LLP Evaluation Board, | |
172 | which interfaces to an LM70 temperature sensor using | |
173 | a parallel port. | |
174 | ||
42bbb709 GL |
175 | config SPI_MPC52xx |
176 | tristate "Freescale MPC52xx SPI (non-PSC) controller support" | |
177 | depends on PPC_MPC52xx && SPI | |
178 | select SPI_MASTER_OF | |
179 | help | |
180 | This drivers supports the MPC52xx SPI controller in master SPI | |
181 | mode. | |
182 | ||
00b8fd23 DC |
183 | config SPI_MPC52xx_PSC |
184 | tristate "Freescale MPC52xx PSC SPI controller" | |
6291fe2a | 185 | depends on PPC_MPC52xx && EXPERIMENTAL |
00b8fd23 DC |
186 | help |
187 | This enables using the Freescale MPC52xx Programmable Serial | |
188 | Controller in master SPI mode. | |
189 | ||
6e27388f AG |
190 | config SPI_MPC512x_PSC |
191 | tristate "Freescale MPC512x PSC SPI controller" | |
192 | depends on SPI_MASTER && PPC_MPC512x | |
193 | help | |
194 | This enables using the Freescale MPC5121 Programmable Serial | |
195 | Controller in SPI master mode. | |
196 | ||
b36ece83 MH |
197 | config SPI_FSL_LIB |
198 | tristate | |
199 | depends on FSL_SOC | |
200 | ||
3272029f MH |
201 | config SPI_FSL_SPI |
202 | tristate "Freescale SPI controller" | |
9e04b333 | 203 | depends on FSL_SOC |
b36ece83 | 204 | select SPI_FSL_LIB |
ccf06998 | 205 | help |
3272029f MH |
206 | This enables using the Freescale SPI controllers in master mode. |
207 | MPC83xx platform uses the controller in cpu mode or CPM/QE mode. | |
208 | MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. | |
ccf06998 | 209 | |
8b60d6c2 MH |
210 | config SPI_FSL_ESPI |
211 | tristate "Freescale eSPI controller" | |
212 | depends on FSL_SOC | |
213 | select SPI_FSL_LIB | |
214 | help | |
215 | This enables using the Freescale eSPI controllers in master mode. | |
216 | From MPC8536, 85xx platform uses the controller, and all P10xx, | |
217 | P20xx, P30xx,P40xx, P50xx uses this controller. | |
218 | ||
ce792580 TC |
219 | config SPI_OC_TINY |
220 | tristate "OpenCores tiny SPI" | |
221 | depends on GENERIC_GPIO | |
222 | select SPI_BITBANG | |
223 | help | |
224 | This is the driver for OpenCores tiny SPI master controller. | |
225 | ||
fdb3c18d DB |
226 | config SPI_OMAP_UWIRE |
227 | tristate "OMAP1 MicroWire" | |
6291fe2a | 228 | depends on ARCH_OMAP1 |
fdb3c18d DB |
229 | select SPI_BITBANG |
230 | help | |
231 | This hooks up to the MicroWire controller on OMAP1 chips. | |
232 | ||
ccdc7bf9 | 233 | config SPI_OMAP24XX |
8ebeb545 SR |
234 | tristate "McSPI driver for OMAP" |
235 | depends on ARCH_OMAP2PLUS | |
ccdc7bf9 | 236 | help |
8ebeb545 | 237 | SPI master controller for OMAP24XX and later Multichannel SPI |
ccdc7bf9 | 238 | (McSPI) modules. |
69c202af | 239 | |
35c9049b CM |
240 | config SPI_OMAP_100K |
241 | tristate "OMAP SPI 100K" | |
242 | depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730) | |
243 | help | |
244 | OMAP SPI 100K master controller for omap7xx boards. | |
245 | ||
60cadec9 SA |
246 | config SPI_ORION |
247 | tristate "Orion SPI master (EXPERIMENTAL)" | |
248 | depends on PLAT_ORION && EXPERIMENTAL | |
249 | help | |
250 | This enables using the SPI master controller on the Orion chips. | |
251 | ||
b43d65f7 | 252 | config SPI_PL022 |
7f9a4b97 LW |
253 | tristate "ARM AMBA PL022 SSP controller" |
254 | depends on ARM_AMBA | |
b43d65f7 | 255 | default y if MACH_U300 |
f33b29ee | 256 | default y if ARCH_REALVIEW |
257 | default y if INTEGRATOR_IMPD1 | |
258 | default y if ARCH_VERSATILE | |
b43d65f7 LW |
259 | help |
260 | This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP | |
261 | controller. If you have an embedded system with an AMBA(R) | |
262 | bus and a PL022 controller, say Y or M here. | |
263 | ||
44dab88e SF |
264 | config SPI_PPC4xx |
265 | tristate "PPC4xx SPI Controller" | |
266 | depends on PPC32 && 4xx && SPI_MASTER | |
267 | select SPI_BITBANG | |
268 | help | |
269 | This selects a driver for the PPC4xx SPI Controller. | |
270 | ||
e0c9905e SS |
271 | config SPI_PXA2XX |
272 | tristate "PXA2xx SSP SPI master" | |
d6ea3df0 SAS |
273 | depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL |
274 | select PXA_SSP if ARCH_PXA | |
e0c9905e | 275 | help |
d6ea3df0 SAS |
276 | This enables using a PXA2xx or Sodaville SSP port as a SPI master |
277 | controller. The driver can be configured to use any SSP port and | |
278 | additional documentation can be found a Documentation/spi/pxa2xx. | |
279 | ||
280 | config SPI_PXA2XX_PCI | |
281 | def_bool SPI_PXA2XX && X86_32 && PCI | |
e0c9905e | 282 | |
85abfaa7 DB |
283 | config SPI_S3C24XX |
284 | tristate "Samsung S3C24XX series SPI" | |
6291fe2a | 285 | depends on ARCH_S3C2410 && EXPERIMENTAL |
da0abc27 | 286 | select SPI_BITBANG |
85abfaa7 DB |
287 | help |
288 | SPI driver for Samsung S3C24XX series ARM SoCs | |
289 | ||
bec0806c BD |
290 | config SPI_S3C24XX_FIQ |
291 | bool "S3C24XX driver with FIQ pseudo-DMA" | |
292 | depends on SPI_S3C24XX | |
293 | select FIQ | |
294 | help | |
295 | Enable FIQ support for the S3C24XX SPI driver to provide pseudo | |
296 | DMA by using the fast-interrupt request framework, This allows | |
297 | the driver to get DMA-like performance when there are either | |
298 | no free DMA channels, or when doing transfers that required both | |
299 | TX and RX data paths. | |
300 | ||
230d42d4 JB |
301 | config SPI_S3C64XX |
302 | tristate "Samsung S3C64XX series type SPI" | |
5f35765d AK |
303 | depends on (ARCH_S3C64XX || ARCH_S5P64X0) |
304 | select S3C64XX_DMA if ARCH_S3C64XX | |
230d42d4 JB |
305 | help |
306 | SPI driver for Samsung S3C64XX and newer SoCs. | |
307 | ||
8051effc MD |
308 | config SPI_SH_MSIOF |
309 | tristate "SuperH MSIOF SPI controller" | |
310 | depends on SUPERH && HAVE_CLK | |
311 | select SPI_BITBANG | |
312 | help | |
313 | SPI driver for SuperH MSIOF blocks. | |
314 | ||
5c05dd07 YS |
315 | config SPI_SH |
316 | tristate "SuperH SPI controller" | |
317 | depends on SUPERH | |
318 | help | |
319 | SPI driver for SuperH SPI blocks. | |
320 | ||
37e46640 MD |
321 | config SPI_SH_SCI |
322 | tristate "SuperH SCI SPI controller" | |
6291fe2a | 323 | depends on SUPERH |
37e46640 MD |
324 | select SPI_BITBANG |
325 | help | |
326 | SPI driver for SuperH SCI blocks. | |
327 | ||
0644c486 | 328 | config SPI_STMP3XXX |
329 | tristate "Freescale STMP37xx/378x SPI/SSP controller" | |
330 | depends on ARCH_STMP3XXX && SPI_MASTER | |
331 | help | |
332 | SPI driver for Freescale STMP37xx/378x SoC SSP interface | |
333 | ||
0c03a1dd EG |
334 | config SPI_TEGRA |
335 | tristate "Nvidia Tegra SPI controller" | |
336 | depends on ARCH_TEGRA | |
337 | select TEGRA_SYSTEM_DMA | |
338 | help | |
339 | SPI driver for NVidia Tegra SoCs | |
340 | ||
a72aeefe CC |
341 | config SPI_TI_SSP |
342 | tristate "TI Sequencer Serial Port - SPI Support" | |
343 | depends on MFD_TI_SSP | |
344 | help | |
345 | This selects an SPI master implementation using a TI sequencer | |
346 | serial port. | |
347 | ||
e8b17b5b | 348 | config SPI_TOPCLIFF_PCH |
f016aeb6 | 349 | tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller" |
e8b17b5b MO |
350 | depends on PCI |
351 | help | |
cdbc8f04 GL |
352 | SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus |
353 | used in some x86 embedded processors. | |
e8b17b5b | 354 | |
f016aeb6 TM |
355 | This driver also supports the ML7213, a companion chip for the |
356 | Atom E6xx series and compatible with the Intel EG20T PCH. | |
357 | ||
f2cac67d AN |
358 | config SPI_TXX9 |
359 | tristate "Toshiba TXx9 SPI controller" | |
6291fe2a | 360 | depends on GENERIC_GPIO && CPU_TX49XX |
f2cac67d AN |
361 | help |
362 | SPI driver for Toshiba TXx9 MIPS SoCs | |
363 | ||
ae918c02 | 364 | config SPI_XILINX |
c9da2e12 | 365 | tristate "Xilinx SPI controller common module" |
86fc5935 | 366 | depends on HAS_IOMEM && EXPERIMENTAL |
ae918c02 AK |
367 | select SPI_BITBANG |
368 | help | |
369 | This exposes the SPI controller IP from the Xilinx EDK. | |
370 | ||
371 | See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" | |
372 | Product Specification document (DS464) for hardware details. | |
373 | ||
c9da2e12 RR |
374 | Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" |
375 | ||
30eaed05 WZ |
376 | config SPI_NUC900 |
377 | tristate "Nuvoton NUC900 series SPI" | |
378 | depends on ARCH_W90X900 && EXPERIMENTAL | |
379 | select SPI_BITBANG | |
380 | help | |
381 | SPI driver for Nuvoton NUC900 series ARM SoCs | |
382 | ||
8ae12a0d DB |
383 | # |
384 | # Add new SPI master controllers in alphabetical order above this line | |
385 | # | |
386 | ||
e24c7452 | 387 | config SPI_DESIGNWARE |
8ca8d15a | 388 | tristate "DesignWare SPI controller core support" |
e24c7452 FT |
389 | depends on SPI_MASTER |
390 | help | |
391 | general driver for SPI controller core from DesignWare | |
392 | ||
393 | config SPI_DW_PCI | |
394 | tristate "PCI interface driver for DW SPI core" | |
395 | depends on SPI_DESIGNWARE && PCI | |
396 | ||
7063c0d9 FT |
397 | config SPI_DW_MID_DMA |
398 | bool "DMA support for DW SPI controller on Intel Moorestown platform" | |
399 | depends on SPI_DW_PCI && INTEL_MID_DMAC | |
400 | ||
f7b6fd6d JHD |
401 | config SPI_DW_MMIO |
402 | tristate "Memory-mapped io interface driver for DW SPI core" | |
212b3c8b | 403 | depends on SPI_DESIGNWARE && HAVE_CLK |
f7b6fd6d | 404 | |
8ae12a0d DB |
405 | # |
406 | # There are lots of SPI device types, with sensors and memory | |
407 | # being probably the most widely used ones. | |
408 | # | |
409 | comment "SPI Protocol Masters" | |
8ae12a0d | 410 | |
814a8d50 AP |
411 | config SPI_SPIDEV |
412 | tristate "User mode SPI device driver support" | |
6291fe2a | 413 | depends on EXPERIMENTAL |
814a8d50 AP |
414 | help |
415 | This supports user mode SPI protocol drivers. | |
416 | ||
417 | Note that this application programming interface is EXPERIMENTAL | |
418 | and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. | |
419 | ||
447aef1a BD |
420 | config SPI_TLE62X0 |
421 | tristate "Infineon TLE62X0 (for power switching)" | |
6291fe2a | 422 | depends on SYSFS |
447aef1a BD |
423 | help |
424 | SPI driver for Infineon TLE62X0 series line driver chips, | |
425 | such as the TLE6220, TLE6230 and TLE6240. This provides a | |
426 | sysfs interface, with each line presented as a kind of GPIO | |
427 | exposing both switch control and diagnostic feedback. | |
428 | ||
8ae12a0d DB |
429 | # |
430 | # Add new SPI protocol masters in alphabetical order above this line | |
431 | # | |
432 | ||
6291fe2a RD |
433 | endif # SPI_MASTER |
434 | ||
8ae12a0d DB |
435 | # (slave support would go here) |
436 | ||
79d8c7a8 | 437 | endif # SPI |