[mirror_ubuntu-artful-kernel.git] / drivers / spi / Kconfig

#
# SPI driver configuration
#
# NOTE:  the reason this doesn't show SPI slave support is mostly that
# nobody's needed a slave side API yet.  The master-role API is not
# fully appropriate there, so it'd need some thought to do well.
#
menu "SPI support"
	depends on HAS_IOMEM

config SPI
	bool "SPI support"
	help
	  The "Serial Peripheral Interface" is a low level synchronous
	  protocol.  Chips that support SPI can have data transfer rates
	  up to several tens of Mbit/sec.  Chips are addressed with a
	  controller and a chipselect.  Most SPI slaves don't support
	  dynamic device discovery; some are even write-only or read-only.

	  SPI is widely used by microcontrollers to talk with sensors,
	  eeprom and flash memory, codecs and various other controller
	  chips, analog to digital (and d-to-a) converters, and more.
	  MMC and SD cards can be accessed using SPI protocol; and for
	  DataFlash cards used in MMC sockets, SPI must always be used.

	  SPI is one of a family of similar protocols using a four wire
	  interface (select, clock, data in, data out) including Microwire
	  (half duplex), SSP, SSI, and PSP.  This driver framework should
	  work with most such devices and controllers.

config SPI_DEBUG
	boolean "Debug support for SPI drivers"
	depends on SPI && DEBUG_KERNEL
	help
	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
	  sysfs, and debugfs support in SPI controller and protocol drivers.

#
# MASTER side ... talking to discrete SPI slave chips including microcontrollers
#

config SPI_MASTER
#	boolean "SPI Master Support"
	boolean
	default SPI
	help
	  If your system has an master-capable SPI controller (which
	  provides the clock and chipselect), you can enable that
	  controller and the protocol drivers for the SPI slave chips
	  that are connected.

comment "SPI Master Controller Drivers"
	depends on SPI_MASTER

config SPI_ATMEL
	tristate "Atmel SPI Controller"
	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
	help
	  This selects a driver for the Atmel SPI Controller, present on
	  many AT32 (AVR32) and AT91 (ARM) chips.

config SPI_BFIN
	tristate "SPI controller driver for ADI Blackfin5xx"
	depends on SPI_MASTER && BLACKFIN
	help
	  This is the SPI controller master driver for Blackfin 5xx processor.

config SPI_AU1550
	tristate "Au1550/Au12x0 SPI Controller"
	depends on SPI_MASTER && (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
	select SPI_BITBANG
	help
	  If you say yes to this option, support will be included for the
	  Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).

	  This driver can also be built as a module.  If so, the module
	  will be called au1550_spi.

config SPI_BITBANG
	tristate "Bitbanging SPI master"
	depends on SPI_MASTER && EXPERIMENTAL
	help
	  With a few GPIO pins, your system can bitbang the SPI protocol.
	  Select this to get SPI support through I/O pins (GPIO, parallel
	  port, etc).  Or, some systems' SPI master controller drivers use
	  this code to manage the per-word or per-transfer accesses to the
	  hardware shift registers.

	  This is library code, and is automatically selected by drivers that
	  need it.  You only need to select this explicitly to support driver
	  modules that aren't part of this kernel tree.

config SPI_BUTTERFLY
	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
	select SPI_BITBANG
	help
	  This uses a custom parallel port cable to connect to an AVR
	  Butterfly <http://www.atmel.com/products/avr/butterfly>, an
	  inexpensive battery powered microcontroller evaluation board.
	  This same cable can be used to flash new firmware.

config SPI_IMX
	tristate "Freescale iMX SPI controller"
	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
	help
	  This enables using the Freescale iMX SPI controller in master
	  mode.

config SPI_LM70_LLP
	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
	select SPI_BITBANG
	help
	  This driver supports the NS LM70 LLP Evaluation Board,
	  which interfaces to an LM70 temperature sensor using
	  a parallel port.

config SPI_MPC52xx_PSC
	tristate "Freescale MPC52xx PSC SPI controller"
	depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL
	help
	  This enables using the Freescale MPC52xx Programmable Serial
	  Controller in master SPI mode.

config SPI_MPC83xx
	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
	depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
	select SPI_BITBANG
	help
	  This enables using the Freescale MPC83xx and QUICC Engine SPI
	  controllers in master mode.

	  Note, this driver uniquely supports the SPI controller on the MPC83xx
	  family of PowerPC processors, plus processors with QUICC Engine
	  technology. This driver uses a simple set of shift registers for data
	  (opposed to the CPM based descriptor model).

config SPI_OMAP_UWIRE
	tristate "OMAP1 MicroWire"
	depends on SPI_MASTER && ARCH_OMAP1
	select SPI_BITBANG
	help
	  This hooks up to the MicroWire controller on OMAP1 chips.

config SPI_OMAP24XX
	tristate "McSPI driver for OMAP24xx"
	depends on SPI_MASTER && ARCH_OMAP24XX
	help
	  SPI master controller for OMAP24xx Multichannel SPI
	  (McSPI) modules.

config SPI_PXA2XX
	tristate "PXA2xx SSP SPI master"
	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
	select PXA_SSP
	help
	  This enables using a PXA2xx SSP port as a SPI master controller.
	  The driver can be configured to use any SSP port and additional
	  documentation can be found a Documentation/spi/pxa2xx.

config SPI_S3C24XX
	tristate "Samsung S3C24XX series SPI"
	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
	select SPI_BITBANG
	help
	  SPI driver for Samsung S3C24XX series ARM SoCs

config SPI_S3C24XX_GPIO
	tristate "Samsung S3C24XX series SPI by GPIO"
	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
	select SPI_BITBANG
	help
	  SPI driver for Samsung S3C24XX series ARM SoCs using
	  GPIO lines to provide the SPI bus. This can be used where
	  the inbuilt hardware cannot provide the transfer mode, or
	  where the board is using non hardware connected pins.

config SPI_SH_SCI
	tristate "SuperH SCI SPI controller"
	depends on SPI_MASTER && SUPERH
	select SPI_BITBANG
	help
	  SPI driver for SuperH SCI blocks.

config SPI_TXX9
	tristate "Toshiba TXx9 SPI controller"
	depends on SPI_MASTER && GENERIC_GPIO && CPU_TX49XX
	help
	  SPI driver for Toshiba TXx9 MIPS SoCs

config SPI_XILINX
	tristate "Xilinx SPI controller"
	depends on SPI_MASTER && XILINX_VIRTEX && EXPERIMENTAL
	select SPI_BITBANG
	help
	  This exposes the SPI controller IP from the Xilinx EDK.

	  See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
	  Product Specification document (DS464) for hardware details.

#
# Add new SPI master controllers in alphabetical order above this line
#

#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
#
comment "SPI Protocol Masters"
	depends on SPI_MASTER

config SPI_AT25
	tristate "SPI EEPROMs from most vendors"
	depends on SPI_MASTER && SYSFS
	help
	  Enable this driver to get read/write support to most SPI EEPROMs,
	  after you configure the board init code to know about each eeprom
	  on your target board.

	  This driver can also be built as a module.  If so, the module
	  will be called at25.

config SPI_SPIDEV
	tristate "User mode SPI device driver support"
	depends on SPI_MASTER && EXPERIMENTAL
	help
	  This supports user mode SPI protocol drivers.

	  Note that this application programming interface is EXPERIMENTAL
	  and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.

config SPI_TLE62X0
	tristate "Infineon TLE62X0 (for power switching)"
	depends on SPI_MASTER && SYSFS
	help
	  SPI driver for Infineon TLE62X0 series line driver chips,
	  such as the TLE6220, TLE6230 and TLE6240.  This provides a
	  sysfs interface, with each line presented as a kind of GPIO
	  exposing both switch control and diagnostic feedback.

#
# Add new SPI protocol masters in alphabetical order above this line
#

# (slave support would go here)

endmenu # "SPI support"
Commit	Line	Data
8ae12a0d DB	1	#
	2	# SPI driver configuration
	3	#
	4	# NOTE: the reason this doesn't show SPI slave support is mostly that
	5	# nobody's needed a slave side API yet. The master-role API is not
	6	# fully appropriate there, so it'd need some thought to do well.
	7	#
	8	menu "SPI support"
e25df120	9	depends on HAS_IOMEM
8ae12a0d DB	10
	11	config SPI
	12	bool "SPI support"
	13	help
	14	The "Serial Peripheral Interface" is a low level synchronous
	15	protocol. Chips that support SPI can have data transfer rates
	16	up to several tens of Mbit/sec. Chips are addressed with a
	17	controller and a chipselect. Most SPI slaves don't support
	18	dynamic device discovery; some are even write-only or read-only.
	19
3cb2fccc	20	SPI is widely used by microcontrollers to talk with sensors,
8ae12a0d DB	21	eeprom and flash memory, codecs and various other controller
	22	chips, analog to digital (and d-to-a) converters, and more.
	23	MMC and SD cards can be accessed using SPI protocol; and for
	24	DataFlash cards used in MMC sockets, SPI must always be used.
	25
	26	SPI is one of a family of similar protocols using a four wire
	27	interface (select, clock, data in, data out) including Microwire
	28	(half duplex), SSP, SSI, and PSP. This driver framework should
	29	work with most such devices and controllers.
	30
	31	config SPI_DEBUG
	32	boolean "Debug support for SPI drivers"
	33	depends on SPI && DEBUG_KERNEL
	34	help
	35	Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
	36	sysfs, and debugfs support in SPI controller and protocol drivers.
	37
	38	#
	39	# MASTER side ... talking to discrete SPI slave chips including microcontrollers
	40	#
	41
	42	config SPI_MASTER
	43	# boolean "SPI Master Support"
	44	boolean
	45	default SPI
	46	help
	47	If your system has an master-capable SPI controller (which
	48	provides the clock and chipselect), you can enable that
	49	controller and the protocol drivers for the SPI slave chips
	50	that are connected.
	51
	52	comment "SPI Master Controller Drivers"
	53	depends on SPI_MASTER
	54
754ce4f2 HS	55	config SPI_ATMEL
	56	tristate "Atmel SPI Controller"
	57	depends on (ARCH_AT91 \|\| AVR32) && SPI_MASTER
	58	help
	59	This selects a driver for the Atmel SPI Controller, present on
	60	many AT32 (AVR32) and AT91 (ARM) chips.
	61
a5f6abd4 WB	62	config SPI_BFIN
a5f6abd4 WB	63	tristate "SPI controller driver for ADI Blackfin5xx"
529a73fb	64	depends on SPI_MASTER && BLACKFIN
a5f6abd4 WB	65	help
	66	This is the SPI controller master driver for Blackfin 5xx processor.
	67
63bd2359 JN	68	config SPI_AU1550
	69	tristate "Au1550/Au12x0 SPI Controller"
	70	depends on SPI_MASTER && (SOC_AU1550 \|\| SOC_AU1200) && EXPERIMENTAL
	71	select SPI_BITBANG
	72	help
	73	If you say yes to this option, support will be included for the
	74	Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
	75
	76	This driver can also be built as a module. If so, the module
	77	will be called au1550_spi.
	78
9904f22a DB	79	config SPI_BITBANG
	80	tristate "Bitbanging SPI master"
	81	depends on SPI_MASTER && EXPERIMENTAL
	82	help
	83	With a few GPIO pins, your system can bitbang the SPI protocol.
	84	Select this to get SPI support through I/O pins (GPIO, parallel
	85	port, etc). Or, some systems' SPI master controller drivers use
	86	this code to manage the per-word or per-transfer accesses to the
	87	hardware shift registers.
	88
	89	This is library code, and is automatically selected by drivers that
	90	need it. You only need to select this explicitly to support driver
	91	modules that aren't part of this kernel tree.
8ae12a0d	92
7111763d DB	93	config SPI_BUTTERFLY
	94	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
	95	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
	96	select SPI_BITBANG
	97	help
	98	This uses a custom parallel port cable to connect to an AVR
	99	Butterfly <http://www.atmel.com/products/avr/butterfly>, an
	100	inexpensive battery powered microcontroller evaluation board.
	101	This same cable can be used to flash new firmware.
	102
69c202af AP	103	config SPI_IMX
	104	tristate "Freescale iMX SPI controller"
	105	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
	106	help
	107	This enables using the Freescale iMX SPI controller in master
	108	mode.
	109
78961a57 KB	110	config SPI_LM70_LLP
	111	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
	112	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
	113	select SPI_BITBANG
	114	help
	115	This driver supports the NS LM70 LLP Evaluation Board,
	116	which interfaces to an LM70 temperature sensor using
	117	a parallel port.
	118
00b8fd23 DC	119	config SPI_MPC52xx_PSC
	120	tristate "Freescale MPC52xx PSC SPI controller"
	121	depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL
	122	help
	123	This enables using the Freescale MPC52xx Programmable Serial
	124	Controller in master SPI mode.
	125
ccf06998	126	config SPI_MPC83xx
328329a7 AV	127	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
328329a7 AV	128	depends on SPI_MASTER && (PPC_83xx \|\| QUICC_ENGINE) && EXPERIMENTAL
ccf06998 KG	129	select SPI_BITBANG
ccf06998 KG	130	help
328329a7 AV	131	This enables using the Freescale MPC83xx and QUICC Engine SPI
328329a7 AV	132	controllers in master mode.
ccf06998 KG	133
ccf06998 KG	134	Note, this driver uniquely supports the SPI controller on the MPC83xx
328329a7 AV	135	family of PowerPC processors, plus processors with QUICC Engine
	136	technology. This driver uses a simple set of shift registers for data
	137	(opposed to the CPM based descriptor model).
ccf06998	138
fdb3c18d DB	139	config SPI_OMAP_UWIRE
	140	tristate "OMAP1 MicroWire"
	141	depends on SPI_MASTER && ARCH_OMAP1
	142	select SPI_BITBANG
	143	help
	144	This hooks up to the MicroWire controller on OMAP1 chips.
	145
ccdc7bf9 SO	146	config SPI_OMAP24XX
	147	tristate "McSPI driver for OMAP24xx"
	148	depends on SPI_MASTER && ARCH_OMAP24XX
	149	help
	150	SPI master controller for OMAP24xx Multichannel SPI
	151	(McSPI) modules.
69c202af	152
e0c9905e SS	153	config SPI_PXA2XX
	154	tristate "PXA2xx SSP SPI master"
	155	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
2f1a74e5	156	select PXA_SSP
e0c9905e SS	157	help
	158	This enables using a PXA2xx SSP port as a SPI master controller.
	159	The driver can be configured to use any SSP port and additional
	160	documentation can be found a Documentation/spi/pxa2xx.
	161
85abfaa7 DB	162	config SPI_S3C24XX
	163	tristate "Samsung S3C24XX series SPI"
	164	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
da0abc27	165	select SPI_BITBANG
85abfaa7 DB	166	help
	167	SPI driver for Samsung S3C24XX series ARM SoCs
	168
1fc7547d BD	169	config SPI_S3C24XX_GPIO
1fc7547d BD	170	tristate "Samsung S3C24XX series SPI by GPIO"
da0abc27 DB	171	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
da0abc27 DB	172	select SPI_BITBANG
1fc7547d BD	173	help
	174	SPI driver for Samsung S3C24XX series ARM SoCs using
	175	GPIO lines to provide the SPI bus. This can be used where
	176	the inbuilt hardware cannot provide the transfer mode, or
	177	where the board is using non hardware connected pins.
ae918c02	178
37e46640 MD	179	config SPI_SH_SCI
	180	tristate "SuperH SCI SPI controller"
	181	depends on SPI_MASTER && SUPERH
	182	select SPI_BITBANG
	183	help
	184	SPI driver for SuperH SCI blocks.
	185
f2cac67d AN	186	config SPI_TXX9
	187	tristate "Toshiba TXx9 SPI controller"
	188	depends on SPI_MASTER && GENERIC_GPIO && CPU_TX49XX
	189	help
	190	SPI driver for Toshiba TXx9 MIPS SoCs
	191
ae918c02 AK	192	config SPI_XILINX
	193	tristate "Xilinx SPI controller"
	194	depends on SPI_MASTER && XILINX_VIRTEX && EXPERIMENTAL
	195	select SPI_BITBANG
	196	help
	197	This exposes the SPI controller IP from the Xilinx EDK.
	198
	199	See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
	200	Product Specification document (DS464) for hardware details.
	201
8ae12a0d DB	202	#
	203	# Add new SPI master controllers in alphabetical order above this line
	204	#
	205
8ae12a0d DB	206	#
	207	# There are lots of SPI device types, with sensors and memory
	208	# being probably the most widely used ones.
	209	#
	210	comment "SPI Protocol Masters"
	211	depends on SPI_MASTER
	212
b587b13a DB	213	config SPI_AT25
	214	tristate "SPI EEPROMs from most vendors"
	215	depends on SPI_MASTER && SYSFS
	216	help
	217	Enable this driver to get read/write support to most SPI EEPROMs,
	218	after you configure the board init code to know about each eeprom
	219	on your target board.
	220
	221	This driver can also be built as a module. If so, the module
	222	will be called at25.
8ae12a0d	223
814a8d50 AP	224	config SPI_SPIDEV
	225	tristate "User mode SPI device driver support"
	226	depends on SPI_MASTER && EXPERIMENTAL
	227	help
	228	This supports user mode SPI protocol drivers.
	229
	230	Note that this application programming interface is EXPERIMENTAL
	231	and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
	232
447aef1a BD	233	config SPI_TLE62X0
	234	tristate "Infineon TLE62X0 (for power switching)"
	235	depends on SPI_MASTER && SYSFS
	236	help
	237	SPI driver for Infineon TLE62X0 series line driver chips,
	238	such as the TLE6220, TLE6230 and TLE6240. This provides a
	239	sysfs interface, with each line presented as a kind of GPIO
	240	exposing both switch control and diagnostic feedback.
	241
8ae12a0d DB	242	#
	243	# Add new SPI protocol masters in alphabetical order above this line
	244	#
	245
8ae12a0d DB	246	# (slave support would go here)
	247
	248	endmenu # "SPI support"
	249