]>
Commit | Line | Data |
---|---|---|
8ae12a0d | 1 | /* |
ca632f55 | 2 | * SPI init/core code |
8ae12a0d DB |
3 | * |
4 | * Copyright (C) 2005 David Brownell | |
d57a4282 | 5 | * Copyright (C) 2008 Secret Lab Technologies Ltd. |
8ae12a0d DB |
6 | * |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
8ae12a0d DB |
16 | */ |
17 | ||
8ae12a0d DB |
18 | #include <linux/kernel.h> |
19 | #include <linux/device.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/cache.h> | |
99adef31 MB |
22 | #include <linux/dma-mapping.h> |
23 | #include <linux/dmaengine.h> | |
94040828 | 24 | #include <linux/mutex.h> |
2b7a32f7 | 25 | #include <linux/of_device.h> |
d57a4282 | 26 | #include <linux/of_irq.h> |
86be408b | 27 | #include <linux/clk/clk-conf.h> |
5a0e3ad6 | 28 | #include <linux/slab.h> |
e0626e38 | 29 | #include <linux/mod_devicetable.h> |
8ae12a0d | 30 | #include <linux/spi/spi.h> |
74317984 | 31 | #include <linux/of_gpio.h> |
3ae22e8c | 32 | #include <linux/pm_runtime.h> |
f48c767c | 33 | #include <linux/pm_domain.h> |
025ed130 | 34 | #include <linux/export.h> |
8bd75c77 | 35 | #include <linux/sched/rt.h> |
ffbbdd21 LW |
36 | #include <linux/delay.h> |
37 | #include <linux/kthread.h> | |
64bee4d2 MW |
38 | #include <linux/ioport.h> |
39 | #include <linux/acpi.h> | |
8ae12a0d | 40 | |
56ec1978 MB |
41 | #define CREATE_TRACE_POINTS |
42 | #include <trace/events/spi.h> | |
43 | ||
8ae12a0d DB |
44 | static void spidev_release(struct device *dev) |
45 | { | |
0ffa0285 | 46 | struct spi_device *spi = to_spi_device(dev); |
8ae12a0d DB |
47 | |
48 | /* spi masters may cleanup for released devices */ | |
49 | if (spi->master->cleanup) | |
50 | spi->master->cleanup(spi); | |
51 | ||
0c868461 | 52 | spi_master_put(spi->master); |
07a389fe | 53 | kfree(spi); |
8ae12a0d DB |
54 | } |
55 | ||
56 | static ssize_t | |
57 | modalias_show(struct device *dev, struct device_attribute *a, char *buf) | |
58 | { | |
59 | const struct spi_device *spi = to_spi_device(dev); | |
8c4ff6d0 ZR |
60 | int len; |
61 | ||
62 | len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1); | |
63 | if (len != -ENODEV) | |
64 | return len; | |
8ae12a0d | 65 | |
d8e328b3 | 66 | return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias); |
8ae12a0d | 67 | } |
aa7da564 | 68 | static DEVICE_ATTR_RO(modalias); |
8ae12a0d | 69 | |
eca2ebc7 MS |
70 | #define SPI_STATISTICS_ATTRS(field, file) \ |
71 | static ssize_t spi_master_##field##_show(struct device *dev, \ | |
72 | struct device_attribute *attr, \ | |
73 | char *buf) \ | |
74 | { \ | |
75 | struct spi_master *master = container_of(dev, \ | |
76 | struct spi_master, dev); \ | |
77 | return spi_statistics_##field##_show(&master->statistics, buf); \ | |
78 | } \ | |
79 | static struct device_attribute dev_attr_spi_master_##field = { \ | |
80 | .attr = { .name = file, .mode = S_IRUGO }, \ | |
81 | .show = spi_master_##field##_show, \ | |
82 | }; \ | |
83 | static ssize_t spi_device_##field##_show(struct device *dev, \ | |
84 | struct device_attribute *attr, \ | |
85 | char *buf) \ | |
86 | { \ | |
d1eba93b | 87 | struct spi_device *spi = to_spi_device(dev); \ |
eca2ebc7 MS |
88 | return spi_statistics_##field##_show(&spi->statistics, buf); \ |
89 | } \ | |
90 | static struct device_attribute dev_attr_spi_device_##field = { \ | |
91 | .attr = { .name = file, .mode = S_IRUGO }, \ | |
92 | .show = spi_device_##field##_show, \ | |
93 | } | |
94 | ||
95 | #define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \ | |
96 | static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \ | |
97 | char *buf) \ | |
98 | { \ | |
99 | unsigned long flags; \ | |
100 | ssize_t len; \ | |
101 | spin_lock_irqsave(&stat->lock, flags); \ | |
102 | len = sprintf(buf, format_string, stat->field); \ | |
103 | spin_unlock_irqrestore(&stat->lock, flags); \ | |
104 | return len; \ | |
105 | } \ | |
106 | SPI_STATISTICS_ATTRS(name, file) | |
107 | ||
108 | #define SPI_STATISTICS_SHOW(field, format_string) \ | |
109 | SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \ | |
110 | field, format_string) | |
111 | ||
112 | SPI_STATISTICS_SHOW(messages, "%lu"); | |
113 | SPI_STATISTICS_SHOW(transfers, "%lu"); | |
114 | SPI_STATISTICS_SHOW(errors, "%lu"); | |
115 | SPI_STATISTICS_SHOW(timedout, "%lu"); | |
116 | ||
117 | SPI_STATISTICS_SHOW(spi_sync, "%lu"); | |
118 | SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu"); | |
119 | SPI_STATISTICS_SHOW(spi_async, "%lu"); | |
120 | ||
121 | SPI_STATISTICS_SHOW(bytes, "%llu"); | |
122 | SPI_STATISTICS_SHOW(bytes_rx, "%llu"); | |
123 | SPI_STATISTICS_SHOW(bytes_tx, "%llu"); | |
124 | ||
6b7bc061 MS |
125 | #define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \ |
126 | SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \ | |
127 | "transfer_bytes_histo_" number, \ | |
128 | transfer_bytes_histo[index], "%lu") | |
129 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1"); | |
130 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3"); | |
131 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7"); | |
132 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15"); | |
133 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31"); | |
134 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63"); | |
135 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127"); | |
136 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255"); | |
137 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511"); | |
138 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023"); | |
139 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047"); | |
140 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095"); | |
141 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191"); | |
142 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383"); | |
143 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767"); | |
144 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535"); | |
145 | SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+"); | |
146 | ||
d9f12122 MS |
147 | SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu"); |
148 | ||
aa7da564 GKH |
149 | static struct attribute *spi_dev_attrs[] = { |
150 | &dev_attr_modalias.attr, | |
151 | NULL, | |
8ae12a0d | 152 | }; |
eca2ebc7 MS |
153 | |
154 | static const struct attribute_group spi_dev_group = { | |
155 | .attrs = spi_dev_attrs, | |
156 | }; | |
157 | ||
158 | static struct attribute *spi_device_statistics_attrs[] = { | |
159 | &dev_attr_spi_device_messages.attr, | |
160 | &dev_attr_spi_device_transfers.attr, | |
161 | &dev_attr_spi_device_errors.attr, | |
162 | &dev_attr_spi_device_timedout.attr, | |
163 | &dev_attr_spi_device_spi_sync.attr, | |
164 | &dev_attr_spi_device_spi_sync_immediate.attr, | |
165 | &dev_attr_spi_device_spi_async.attr, | |
166 | &dev_attr_spi_device_bytes.attr, | |
167 | &dev_attr_spi_device_bytes_rx.attr, | |
168 | &dev_attr_spi_device_bytes_tx.attr, | |
6b7bc061 MS |
169 | &dev_attr_spi_device_transfer_bytes_histo0.attr, |
170 | &dev_attr_spi_device_transfer_bytes_histo1.attr, | |
171 | &dev_attr_spi_device_transfer_bytes_histo2.attr, | |
172 | &dev_attr_spi_device_transfer_bytes_histo3.attr, | |
173 | &dev_attr_spi_device_transfer_bytes_histo4.attr, | |
174 | &dev_attr_spi_device_transfer_bytes_histo5.attr, | |
175 | &dev_attr_spi_device_transfer_bytes_histo6.attr, | |
176 | &dev_attr_spi_device_transfer_bytes_histo7.attr, | |
177 | &dev_attr_spi_device_transfer_bytes_histo8.attr, | |
178 | &dev_attr_spi_device_transfer_bytes_histo9.attr, | |
179 | &dev_attr_spi_device_transfer_bytes_histo10.attr, | |
180 | &dev_attr_spi_device_transfer_bytes_histo11.attr, | |
181 | &dev_attr_spi_device_transfer_bytes_histo12.attr, | |
182 | &dev_attr_spi_device_transfer_bytes_histo13.attr, | |
183 | &dev_attr_spi_device_transfer_bytes_histo14.attr, | |
184 | &dev_attr_spi_device_transfer_bytes_histo15.attr, | |
185 | &dev_attr_spi_device_transfer_bytes_histo16.attr, | |
d9f12122 | 186 | &dev_attr_spi_device_transfers_split_maxsize.attr, |
eca2ebc7 MS |
187 | NULL, |
188 | }; | |
189 | ||
190 | static const struct attribute_group spi_device_statistics_group = { | |
191 | .name = "statistics", | |
192 | .attrs = spi_device_statistics_attrs, | |
193 | }; | |
194 | ||
195 | static const struct attribute_group *spi_dev_groups[] = { | |
196 | &spi_dev_group, | |
197 | &spi_device_statistics_group, | |
198 | NULL, | |
199 | }; | |
200 | ||
201 | static struct attribute *spi_master_statistics_attrs[] = { | |
202 | &dev_attr_spi_master_messages.attr, | |
203 | &dev_attr_spi_master_transfers.attr, | |
204 | &dev_attr_spi_master_errors.attr, | |
205 | &dev_attr_spi_master_timedout.attr, | |
206 | &dev_attr_spi_master_spi_sync.attr, | |
207 | &dev_attr_spi_master_spi_sync_immediate.attr, | |
208 | &dev_attr_spi_master_spi_async.attr, | |
209 | &dev_attr_spi_master_bytes.attr, | |
210 | &dev_attr_spi_master_bytes_rx.attr, | |
211 | &dev_attr_spi_master_bytes_tx.attr, | |
6b7bc061 MS |
212 | &dev_attr_spi_master_transfer_bytes_histo0.attr, |
213 | &dev_attr_spi_master_transfer_bytes_histo1.attr, | |
214 | &dev_attr_spi_master_transfer_bytes_histo2.attr, | |
215 | &dev_attr_spi_master_transfer_bytes_histo3.attr, | |
216 | &dev_attr_spi_master_transfer_bytes_histo4.attr, | |
217 | &dev_attr_spi_master_transfer_bytes_histo5.attr, | |
218 | &dev_attr_spi_master_transfer_bytes_histo6.attr, | |
219 | &dev_attr_spi_master_transfer_bytes_histo7.attr, | |
220 | &dev_attr_spi_master_transfer_bytes_histo8.attr, | |
221 | &dev_attr_spi_master_transfer_bytes_histo9.attr, | |
222 | &dev_attr_spi_master_transfer_bytes_histo10.attr, | |
223 | &dev_attr_spi_master_transfer_bytes_histo11.attr, | |
224 | &dev_attr_spi_master_transfer_bytes_histo12.attr, | |
225 | &dev_attr_spi_master_transfer_bytes_histo13.attr, | |
226 | &dev_attr_spi_master_transfer_bytes_histo14.attr, | |
227 | &dev_attr_spi_master_transfer_bytes_histo15.attr, | |
228 | &dev_attr_spi_master_transfer_bytes_histo16.attr, | |
d9f12122 | 229 | &dev_attr_spi_master_transfers_split_maxsize.attr, |
eca2ebc7 MS |
230 | NULL, |
231 | }; | |
232 | ||
233 | static const struct attribute_group spi_master_statistics_group = { | |
234 | .name = "statistics", | |
235 | .attrs = spi_master_statistics_attrs, | |
236 | }; | |
237 | ||
238 | static const struct attribute_group *spi_master_groups[] = { | |
239 | &spi_master_statistics_group, | |
240 | NULL, | |
241 | }; | |
242 | ||
243 | void spi_statistics_add_transfer_stats(struct spi_statistics *stats, | |
244 | struct spi_transfer *xfer, | |
245 | struct spi_master *master) | |
246 | { | |
247 | unsigned long flags; | |
6b7bc061 MS |
248 | int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1; |
249 | ||
250 | if (l2len < 0) | |
251 | l2len = 0; | |
eca2ebc7 MS |
252 | |
253 | spin_lock_irqsave(&stats->lock, flags); | |
254 | ||
255 | stats->transfers++; | |
6b7bc061 | 256 | stats->transfer_bytes_histo[l2len]++; |
eca2ebc7 MS |
257 | |
258 | stats->bytes += xfer->len; | |
259 | if ((xfer->tx_buf) && | |
260 | (xfer->tx_buf != master->dummy_tx)) | |
261 | stats->bytes_tx += xfer->len; | |
262 | if ((xfer->rx_buf) && | |
263 | (xfer->rx_buf != master->dummy_rx)) | |
264 | stats->bytes_rx += xfer->len; | |
265 | ||
266 | spin_unlock_irqrestore(&stats->lock, flags); | |
267 | } | |
268 | EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats); | |
8ae12a0d DB |
269 | |
270 | /* modalias support makes "modprobe $MODALIAS" new-style hotplug work, | |
271 | * and the sysfs version makes coldplug work too. | |
272 | */ | |
273 | ||
75368bf6 AV |
274 | static const struct spi_device_id *spi_match_id(const struct spi_device_id *id, |
275 | const struct spi_device *sdev) | |
276 | { | |
277 | while (id->name[0]) { | |
278 | if (!strcmp(sdev->modalias, id->name)) | |
279 | return id; | |
280 | id++; | |
281 | } | |
282 | return NULL; | |
283 | } | |
284 | ||
285 | const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev) | |
286 | { | |
287 | const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver); | |
288 | ||
289 | return spi_match_id(sdrv->id_table, sdev); | |
290 | } | |
291 | EXPORT_SYMBOL_GPL(spi_get_device_id); | |
292 | ||
8ae12a0d DB |
293 | static int spi_match_device(struct device *dev, struct device_driver *drv) |
294 | { | |
295 | const struct spi_device *spi = to_spi_device(dev); | |
75368bf6 AV |
296 | const struct spi_driver *sdrv = to_spi_driver(drv); |
297 | ||
2b7a32f7 SA |
298 | /* Attempt an OF style match */ |
299 | if (of_driver_match_device(dev, drv)) | |
300 | return 1; | |
301 | ||
64bee4d2 MW |
302 | /* Then try ACPI */ |
303 | if (acpi_driver_match_device(dev, drv)) | |
304 | return 1; | |
305 | ||
75368bf6 AV |
306 | if (sdrv->id_table) |
307 | return !!spi_match_id(sdrv->id_table, spi); | |
8ae12a0d | 308 | |
35f74fca | 309 | return strcmp(spi->modalias, drv->name) == 0; |
8ae12a0d DB |
310 | } |
311 | ||
7eff2e7a | 312 | static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) |
8ae12a0d DB |
313 | { |
314 | const struct spi_device *spi = to_spi_device(dev); | |
8c4ff6d0 ZR |
315 | int rc; |
316 | ||
317 | rc = acpi_device_uevent_modalias(dev, env); | |
318 | if (rc != -ENODEV) | |
319 | return rc; | |
8ae12a0d | 320 | |
e0626e38 | 321 | add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias); |
8ae12a0d DB |
322 | return 0; |
323 | } | |
324 | ||
8ae12a0d DB |
325 | struct bus_type spi_bus_type = { |
326 | .name = "spi", | |
aa7da564 | 327 | .dev_groups = spi_dev_groups, |
8ae12a0d DB |
328 | .match = spi_match_device, |
329 | .uevent = spi_uevent, | |
8ae12a0d DB |
330 | }; |
331 | EXPORT_SYMBOL_GPL(spi_bus_type); | |
332 | ||
b885244e DB |
333 | |
334 | static int spi_drv_probe(struct device *dev) | |
335 | { | |
336 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
44af7927 | 337 | struct spi_device *spi = to_spi_device(dev); |
33cf00e5 MW |
338 | int ret; |
339 | ||
86be408b SN |
340 | ret = of_clk_set_defaults(dev->of_node, false); |
341 | if (ret) | |
342 | return ret; | |
343 | ||
44af7927 JH |
344 | if (dev->of_node) { |
345 | spi->irq = of_irq_get(dev->of_node, 0); | |
346 | if (spi->irq == -EPROBE_DEFER) | |
347 | return -EPROBE_DEFER; | |
348 | if (spi->irq < 0) | |
349 | spi->irq = 0; | |
350 | } | |
351 | ||
676e7c25 UH |
352 | ret = dev_pm_domain_attach(dev, true); |
353 | if (ret != -EPROBE_DEFER) { | |
44af7927 | 354 | ret = sdrv->probe(spi); |
676e7c25 UH |
355 | if (ret) |
356 | dev_pm_domain_detach(dev, true); | |
357 | } | |
b885244e | 358 | |
33cf00e5 | 359 | return ret; |
b885244e DB |
360 | } |
361 | ||
362 | static int spi_drv_remove(struct device *dev) | |
363 | { | |
364 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
33cf00e5 MW |
365 | int ret; |
366 | ||
aec35f4e | 367 | ret = sdrv->remove(to_spi_device(dev)); |
676e7c25 | 368 | dev_pm_domain_detach(dev, true); |
b885244e | 369 | |
33cf00e5 | 370 | return ret; |
b885244e DB |
371 | } |
372 | ||
373 | static void spi_drv_shutdown(struct device *dev) | |
374 | { | |
375 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
376 | ||
377 | sdrv->shutdown(to_spi_device(dev)); | |
378 | } | |
379 | ||
33e34dc6 | 380 | /** |
ca5d2485 | 381 | * __spi_register_driver - register a SPI driver |
88c9321d | 382 | * @owner: owner module of the driver to register |
33e34dc6 DB |
383 | * @sdrv: the driver to register |
384 | * Context: can sleep | |
97d56dc6 JMC |
385 | * |
386 | * Return: zero on success, else a negative error code. | |
33e34dc6 | 387 | */ |
ca5d2485 | 388 | int __spi_register_driver(struct module *owner, struct spi_driver *sdrv) |
b885244e | 389 | { |
ca5d2485 | 390 | sdrv->driver.owner = owner; |
b885244e DB |
391 | sdrv->driver.bus = &spi_bus_type; |
392 | if (sdrv->probe) | |
393 | sdrv->driver.probe = spi_drv_probe; | |
394 | if (sdrv->remove) | |
395 | sdrv->driver.remove = spi_drv_remove; | |
396 | if (sdrv->shutdown) | |
397 | sdrv->driver.shutdown = spi_drv_shutdown; | |
398 | return driver_register(&sdrv->driver); | |
399 | } | |
ca5d2485 | 400 | EXPORT_SYMBOL_GPL(__spi_register_driver); |
b885244e | 401 | |
8ae12a0d DB |
402 | /*-------------------------------------------------------------------------*/ |
403 | ||
404 | /* SPI devices should normally not be created by SPI device drivers; that | |
405 | * would make them board-specific. Similarly with SPI master drivers. | |
406 | * Device registration normally goes into like arch/.../mach.../board-YYY.c | |
407 | * with other readonly (flashable) information about mainboard devices. | |
408 | */ | |
409 | ||
410 | struct boardinfo { | |
411 | struct list_head list; | |
2b9603a0 | 412 | struct spi_board_info board_info; |
8ae12a0d DB |
413 | }; |
414 | ||
415 | static LIST_HEAD(board_list); | |
2b9603a0 FT |
416 | static LIST_HEAD(spi_master_list); |
417 | ||
418 | /* | |
419 | * Used to protect add/del opertion for board_info list and | |
420 | * spi_master list, and their matching process | |
421 | */ | |
94040828 | 422 | static DEFINE_MUTEX(board_lock); |
8ae12a0d | 423 | |
dc87c98e GL |
424 | /** |
425 | * spi_alloc_device - Allocate a new SPI device | |
426 | * @master: Controller to which device is connected | |
427 | * Context: can sleep | |
428 | * | |
429 | * Allows a driver to allocate and initialize a spi_device without | |
430 | * registering it immediately. This allows a driver to directly | |
431 | * fill the spi_device with device parameters before calling | |
432 | * spi_add_device() on it. | |
433 | * | |
434 | * Caller is responsible to call spi_add_device() on the returned | |
435 | * spi_device structure to add it to the SPI master. If the caller | |
436 | * needs to discard the spi_device without adding it, then it should | |
437 | * call spi_dev_put() on it. | |
438 | * | |
97d56dc6 | 439 | * Return: a pointer to the new device, or NULL. |
dc87c98e GL |
440 | */ |
441 | struct spi_device *spi_alloc_device(struct spi_master *master) | |
442 | { | |
443 | struct spi_device *spi; | |
dc87c98e GL |
444 | |
445 | if (!spi_master_get(master)) | |
446 | return NULL; | |
447 | ||
5fe5f05e | 448 | spi = kzalloc(sizeof(*spi), GFP_KERNEL); |
dc87c98e | 449 | if (!spi) { |
dc87c98e GL |
450 | spi_master_put(master); |
451 | return NULL; | |
452 | } | |
453 | ||
454 | spi->master = master; | |
178db7d3 | 455 | spi->dev.parent = &master->dev; |
dc87c98e GL |
456 | spi->dev.bus = &spi_bus_type; |
457 | spi->dev.release = spidev_release; | |
446411e1 | 458 | spi->cs_gpio = -ENOENT; |
eca2ebc7 MS |
459 | |
460 | spin_lock_init(&spi->statistics.lock); | |
461 | ||
dc87c98e GL |
462 | device_initialize(&spi->dev); |
463 | return spi; | |
464 | } | |
465 | EXPORT_SYMBOL_GPL(spi_alloc_device); | |
466 | ||
e13ac47b JN |
467 | static void spi_dev_set_name(struct spi_device *spi) |
468 | { | |
469 | struct acpi_device *adev = ACPI_COMPANION(&spi->dev); | |
470 | ||
471 | if (adev) { | |
472 | dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev)); | |
473 | return; | |
474 | } | |
475 | ||
476 | dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev), | |
477 | spi->chip_select); | |
478 | } | |
479 | ||
b6fb8d3a MW |
480 | static int spi_dev_check(struct device *dev, void *data) |
481 | { | |
482 | struct spi_device *spi = to_spi_device(dev); | |
483 | struct spi_device *new_spi = data; | |
484 | ||
485 | if (spi->master == new_spi->master && | |
486 | spi->chip_select == new_spi->chip_select) | |
487 | return -EBUSY; | |
488 | return 0; | |
489 | } | |
490 | ||
dc87c98e GL |
491 | /** |
492 | * spi_add_device - Add spi_device allocated with spi_alloc_device | |
493 | * @spi: spi_device to register | |
494 | * | |
495 | * Companion function to spi_alloc_device. Devices allocated with | |
496 | * spi_alloc_device can be added onto the spi bus with this function. | |
497 | * | |
97d56dc6 | 498 | * Return: 0 on success; negative errno on failure |
dc87c98e GL |
499 | */ |
500 | int spi_add_device(struct spi_device *spi) | |
501 | { | |
e48880e0 | 502 | static DEFINE_MUTEX(spi_add_lock); |
74317984 JCPV |
503 | struct spi_master *master = spi->master; |
504 | struct device *dev = master->dev.parent; | |
dc87c98e GL |
505 | int status; |
506 | ||
507 | /* Chipselects are numbered 0..max; validate. */ | |
74317984 | 508 | if (spi->chip_select >= master->num_chipselect) { |
dc87c98e GL |
509 | dev_err(dev, "cs%d >= max %d\n", |
510 | spi->chip_select, | |
74317984 | 511 | master->num_chipselect); |
dc87c98e GL |
512 | return -EINVAL; |
513 | } | |
514 | ||
515 | /* Set the bus ID string */ | |
e13ac47b | 516 | spi_dev_set_name(spi); |
e48880e0 DB |
517 | |
518 | /* We need to make sure there's no other device with this | |
519 | * chipselect **BEFORE** we call setup(), else we'll trash | |
520 | * its configuration. Lock against concurrent add() calls. | |
521 | */ | |
522 | mutex_lock(&spi_add_lock); | |
523 | ||
b6fb8d3a MW |
524 | status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); |
525 | if (status) { | |
e48880e0 DB |
526 | dev_err(dev, "chipselect %d already in use\n", |
527 | spi->chip_select); | |
e48880e0 DB |
528 | goto done; |
529 | } | |
530 | ||
74317984 JCPV |
531 | if (master->cs_gpios) |
532 | spi->cs_gpio = master->cs_gpios[spi->chip_select]; | |
533 | ||
e48880e0 DB |
534 | /* Drivers may modify this initial i/o setup, but will |
535 | * normally rely on the device being setup. Devices | |
536 | * using SPI_CS_HIGH can't coexist well otherwise... | |
537 | */ | |
7d077197 | 538 | status = spi_setup(spi); |
dc87c98e | 539 | if (status < 0) { |
eb288a1f LW |
540 | dev_err(dev, "can't setup %s, status %d\n", |
541 | dev_name(&spi->dev), status); | |
e48880e0 | 542 | goto done; |
dc87c98e GL |
543 | } |
544 | ||
e48880e0 | 545 | /* Device may be bound to an active driver when this returns */ |
dc87c98e | 546 | status = device_add(&spi->dev); |
e48880e0 | 547 | if (status < 0) |
eb288a1f LW |
548 | dev_err(dev, "can't add %s, status %d\n", |
549 | dev_name(&spi->dev), status); | |
e48880e0 | 550 | else |
35f74fca | 551 | dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev)); |
dc87c98e | 552 | |
e48880e0 DB |
553 | done: |
554 | mutex_unlock(&spi_add_lock); | |
555 | return status; | |
dc87c98e GL |
556 | } |
557 | EXPORT_SYMBOL_GPL(spi_add_device); | |
8ae12a0d | 558 | |
33e34dc6 DB |
559 | /** |
560 | * spi_new_device - instantiate one new SPI device | |
561 | * @master: Controller to which device is connected | |
562 | * @chip: Describes the SPI device | |
563 | * Context: can sleep | |
564 | * | |
565 | * On typical mainboards, this is purely internal; and it's not needed | |
8ae12a0d DB |
566 | * after board init creates the hard-wired devices. Some development |
567 | * platforms may not be able to use spi_register_board_info though, and | |
568 | * this is exported so that for example a USB or parport based adapter | |
569 | * driver could add devices (which it would learn about out-of-band). | |
082c8cb4 | 570 | * |
97d56dc6 | 571 | * Return: the new device, or NULL. |
8ae12a0d | 572 | */ |
e9d5a461 AB |
573 | struct spi_device *spi_new_device(struct spi_master *master, |
574 | struct spi_board_info *chip) | |
8ae12a0d DB |
575 | { |
576 | struct spi_device *proxy; | |
8ae12a0d DB |
577 | int status; |
578 | ||
082c8cb4 DB |
579 | /* NOTE: caller did any chip->bus_num checks necessary. |
580 | * | |
581 | * Also, unless we change the return value convention to use | |
582 | * error-or-pointer (not NULL-or-pointer), troubleshootability | |
583 | * suggests syslogged diagnostics are best here (ugh). | |
584 | */ | |
585 | ||
dc87c98e GL |
586 | proxy = spi_alloc_device(master); |
587 | if (!proxy) | |
8ae12a0d DB |
588 | return NULL; |
589 | ||
102eb975 GL |
590 | WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias)); |
591 | ||
8ae12a0d DB |
592 | proxy->chip_select = chip->chip_select; |
593 | proxy->max_speed_hz = chip->max_speed_hz; | |
980a01c9 | 594 | proxy->mode = chip->mode; |
8ae12a0d | 595 | proxy->irq = chip->irq; |
102eb975 | 596 | strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias)); |
8ae12a0d DB |
597 | proxy->dev.platform_data = (void *) chip->platform_data; |
598 | proxy->controller_data = chip->controller_data; | |
599 | proxy->controller_state = NULL; | |
8ae12a0d | 600 | |
dc87c98e | 601 | status = spi_add_device(proxy); |
8ae12a0d | 602 | if (status < 0) { |
dc87c98e GL |
603 | spi_dev_put(proxy); |
604 | return NULL; | |
8ae12a0d DB |
605 | } |
606 | ||
8ae12a0d DB |
607 | return proxy; |
608 | } | |
609 | EXPORT_SYMBOL_GPL(spi_new_device); | |
610 | ||
3b1884c2 GU |
611 | /** |
612 | * spi_unregister_device - unregister a single SPI device | |
613 | * @spi: spi_device to unregister | |
614 | * | |
615 | * Start making the passed SPI device vanish. Normally this would be handled | |
616 | * by spi_unregister_master(). | |
617 | */ | |
618 | void spi_unregister_device(struct spi_device *spi) | |
619 | { | |
bd6c1644 GU |
620 | if (!spi) |
621 | return; | |
622 | ||
623 | if (spi->dev.of_node) | |
624 | of_node_clear_flag(spi->dev.of_node, OF_POPULATED); | |
625 | device_unregister(&spi->dev); | |
3b1884c2 GU |
626 | } |
627 | EXPORT_SYMBOL_GPL(spi_unregister_device); | |
628 | ||
2b9603a0 FT |
629 | static void spi_match_master_to_boardinfo(struct spi_master *master, |
630 | struct spi_board_info *bi) | |
631 | { | |
632 | struct spi_device *dev; | |
633 | ||
634 | if (master->bus_num != bi->bus_num) | |
635 | return; | |
636 | ||
637 | dev = spi_new_device(master, bi); | |
638 | if (!dev) | |
639 | dev_err(master->dev.parent, "can't create new device for %s\n", | |
640 | bi->modalias); | |
641 | } | |
642 | ||
33e34dc6 DB |
643 | /** |
644 | * spi_register_board_info - register SPI devices for a given board | |
645 | * @info: array of chip descriptors | |
646 | * @n: how many descriptors are provided | |
647 | * Context: can sleep | |
648 | * | |
8ae12a0d DB |
649 | * Board-specific early init code calls this (probably during arch_initcall) |
650 | * with segments of the SPI device table. Any device nodes are created later, | |
651 | * after the relevant parent SPI controller (bus_num) is defined. We keep | |
652 | * this table of devices forever, so that reloading a controller driver will | |
653 | * not make Linux forget about these hard-wired devices. | |
654 | * | |
655 | * Other code can also call this, e.g. a particular add-on board might provide | |
656 | * SPI devices through its expansion connector, so code initializing that board | |
657 | * would naturally declare its SPI devices. | |
658 | * | |
659 | * The board info passed can safely be __initdata ... but be careful of | |
660 | * any embedded pointers (platform_data, etc), they're copied as-is. | |
97d56dc6 JMC |
661 | * |
662 | * Return: zero on success, else a negative error code. | |
8ae12a0d | 663 | */ |
fd4a319b | 664 | int spi_register_board_info(struct spi_board_info const *info, unsigned n) |
8ae12a0d | 665 | { |
2b9603a0 FT |
666 | struct boardinfo *bi; |
667 | int i; | |
8ae12a0d | 668 | |
c7908a37 XL |
669 | if (!n) |
670 | return -EINVAL; | |
671 | ||
2b9603a0 | 672 | bi = kzalloc(n * sizeof(*bi), GFP_KERNEL); |
8ae12a0d DB |
673 | if (!bi) |
674 | return -ENOMEM; | |
8ae12a0d | 675 | |
2b9603a0 FT |
676 | for (i = 0; i < n; i++, bi++, info++) { |
677 | struct spi_master *master; | |
8ae12a0d | 678 | |
2b9603a0 FT |
679 | memcpy(&bi->board_info, info, sizeof(*info)); |
680 | mutex_lock(&board_lock); | |
681 | list_add_tail(&bi->list, &board_list); | |
682 | list_for_each_entry(master, &spi_master_list, list) | |
683 | spi_match_master_to_boardinfo(master, &bi->board_info); | |
684 | mutex_unlock(&board_lock); | |
8ae12a0d | 685 | } |
2b9603a0 FT |
686 | |
687 | return 0; | |
8ae12a0d DB |
688 | } |
689 | ||
690 | /*-------------------------------------------------------------------------*/ | |
691 | ||
b158935f MB |
692 | static void spi_set_cs(struct spi_device *spi, bool enable) |
693 | { | |
694 | if (spi->mode & SPI_CS_HIGH) | |
695 | enable = !enable; | |
696 | ||
243f07be | 697 | if (gpio_is_valid(spi->cs_gpio)) |
b158935f MB |
698 | gpio_set_value(spi->cs_gpio, !enable); |
699 | else if (spi->master->set_cs) | |
700 | spi->master->set_cs(spi, !enable); | |
701 | } | |
702 | ||
2de440f5 | 703 | #ifdef CONFIG_HAS_DMA |
6ad45a27 MB |
704 | static int spi_map_buf(struct spi_master *master, struct device *dev, |
705 | struct sg_table *sgt, void *buf, size_t len, | |
706 | enum dma_data_direction dir) | |
707 | { | |
708 | const bool vmalloced_buf = is_vmalloc_addr(buf); | |
df88e91b | 709 | unsigned int max_seg_size = dma_get_max_seg_size(dev); |
65598c13 AG |
710 | int desc_len; |
711 | int sgs; | |
6ad45a27 MB |
712 | struct page *vm_page; |
713 | void *sg_buf; | |
714 | size_t min; | |
715 | int i, ret; | |
716 | ||
65598c13 | 717 | if (vmalloced_buf) { |
df88e91b | 718 | desc_len = min_t(int, max_seg_size, PAGE_SIZE); |
65598c13 | 719 | sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len); |
0569a88f | 720 | } else if (virt_addr_valid(buf)) { |
df88e91b | 721 | desc_len = min_t(int, max_seg_size, master->max_dma_len); |
65598c13 | 722 | sgs = DIV_ROUND_UP(len, desc_len); |
0569a88f V |
723 | } else { |
724 | return -EINVAL; | |
65598c13 AG |
725 | } |
726 | ||
6ad45a27 MB |
727 | ret = sg_alloc_table(sgt, sgs, GFP_KERNEL); |
728 | if (ret != 0) | |
729 | return ret; | |
730 | ||
731 | for (i = 0; i < sgs; i++) { | |
6ad45a27 MB |
732 | |
733 | if (vmalloced_buf) { | |
65598c13 AG |
734 | min = min_t(size_t, |
735 | len, desc_len - offset_in_page(buf)); | |
6ad45a27 MB |
736 | vm_page = vmalloc_to_page(buf); |
737 | if (!vm_page) { | |
738 | sg_free_table(sgt); | |
739 | return -ENOMEM; | |
740 | } | |
c1aefbdd CK |
741 | sg_set_page(&sgt->sgl[i], vm_page, |
742 | min, offset_in_page(buf)); | |
6ad45a27 | 743 | } else { |
65598c13 | 744 | min = min_t(size_t, len, desc_len); |
6ad45a27 | 745 | sg_buf = buf; |
c1aefbdd | 746 | sg_set_buf(&sgt->sgl[i], sg_buf, min); |
6ad45a27 MB |
747 | } |
748 | ||
6ad45a27 MB |
749 | buf += min; |
750 | len -= min; | |
751 | } | |
752 | ||
753 | ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir); | |
89e4b66a GU |
754 | if (!ret) |
755 | ret = -ENOMEM; | |
6ad45a27 MB |
756 | if (ret < 0) { |
757 | sg_free_table(sgt); | |
758 | return ret; | |
759 | } | |
760 | ||
761 | sgt->nents = ret; | |
762 | ||
763 | return 0; | |
764 | } | |
765 | ||
766 | static void spi_unmap_buf(struct spi_master *master, struct device *dev, | |
767 | struct sg_table *sgt, enum dma_data_direction dir) | |
768 | { | |
769 | if (sgt->orig_nents) { | |
770 | dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir); | |
771 | sg_free_table(sgt); | |
772 | } | |
773 | } | |
774 | ||
2de440f5 | 775 | static int __spi_map_msg(struct spi_master *master, struct spi_message *msg) |
99adef31 | 776 | { |
99adef31 MB |
777 | struct device *tx_dev, *rx_dev; |
778 | struct spi_transfer *xfer; | |
6ad45a27 | 779 | int ret; |
3a2eba9b | 780 | |
6ad45a27 | 781 | if (!master->can_dma) |
99adef31 MB |
782 | return 0; |
783 | ||
c37f45b5 LL |
784 | if (master->dma_tx) |
785 | tx_dev = master->dma_tx->device->dev; | |
786 | else | |
787 | tx_dev = &master->dev; | |
788 | ||
789 | if (master->dma_rx) | |
790 | rx_dev = master->dma_rx->device->dev; | |
791 | else | |
792 | rx_dev = &master->dev; | |
99adef31 MB |
793 | |
794 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
795 | if (!master->can_dma(master, msg->spi, xfer)) | |
796 | continue; | |
797 | ||
798 | if (xfer->tx_buf != NULL) { | |
6ad45a27 MB |
799 | ret = spi_map_buf(master, tx_dev, &xfer->tx_sg, |
800 | (void *)xfer->tx_buf, xfer->len, | |
801 | DMA_TO_DEVICE); | |
802 | if (ret != 0) | |
803 | return ret; | |
99adef31 MB |
804 | } |
805 | ||
806 | if (xfer->rx_buf != NULL) { | |
6ad45a27 MB |
807 | ret = spi_map_buf(master, rx_dev, &xfer->rx_sg, |
808 | xfer->rx_buf, xfer->len, | |
809 | DMA_FROM_DEVICE); | |
810 | if (ret != 0) { | |
811 | spi_unmap_buf(master, tx_dev, &xfer->tx_sg, | |
812 | DMA_TO_DEVICE); | |
813 | return ret; | |
99adef31 MB |
814 | } |
815 | } | |
816 | } | |
817 | ||
818 | master->cur_msg_mapped = true; | |
819 | ||
820 | return 0; | |
821 | } | |
822 | ||
4b786458 | 823 | static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg) |
99adef31 MB |
824 | { |
825 | struct spi_transfer *xfer; | |
826 | struct device *tx_dev, *rx_dev; | |
827 | ||
6ad45a27 | 828 | if (!master->cur_msg_mapped || !master->can_dma) |
99adef31 MB |
829 | return 0; |
830 | ||
c37f45b5 LL |
831 | if (master->dma_tx) |
832 | tx_dev = master->dma_tx->device->dev; | |
833 | else | |
834 | tx_dev = &master->dev; | |
835 | ||
836 | if (master->dma_rx) | |
837 | rx_dev = master->dma_rx->device->dev; | |
838 | else | |
839 | rx_dev = &master->dev; | |
99adef31 MB |
840 | |
841 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
842 | if (!master->can_dma(master, msg->spi, xfer)) | |
843 | continue; | |
844 | ||
6ad45a27 MB |
845 | spi_unmap_buf(master, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE); |
846 | spi_unmap_buf(master, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE); | |
99adef31 MB |
847 | } |
848 | ||
849 | return 0; | |
850 | } | |
2de440f5 GU |
851 | #else /* !CONFIG_HAS_DMA */ |
852 | static inline int __spi_map_msg(struct spi_master *master, | |
853 | struct spi_message *msg) | |
854 | { | |
855 | return 0; | |
856 | } | |
857 | ||
4b786458 MS |
858 | static inline int __spi_unmap_msg(struct spi_master *master, |
859 | struct spi_message *msg) | |
2de440f5 GU |
860 | { |
861 | return 0; | |
862 | } | |
863 | #endif /* !CONFIG_HAS_DMA */ | |
864 | ||
4b786458 MS |
865 | static inline int spi_unmap_msg(struct spi_master *master, |
866 | struct spi_message *msg) | |
867 | { | |
868 | struct spi_transfer *xfer; | |
869 | ||
870 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
871 | /* | |
872 | * Restore the original value of tx_buf or rx_buf if they are | |
873 | * NULL. | |
874 | */ | |
875 | if (xfer->tx_buf == master->dummy_tx) | |
876 | xfer->tx_buf = NULL; | |
877 | if (xfer->rx_buf == master->dummy_rx) | |
878 | xfer->rx_buf = NULL; | |
879 | } | |
880 | ||
881 | return __spi_unmap_msg(master, msg); | |
882 | } | |
883 | ||
2de440f5 GU |
884 | static int spi_map_msg(struct spi_master *master, struct spi_message *msg) |
885 | { | |
886 | struct spi_transfer *xfer; | |
887 | void *tmp; | |
888 | unsigned int max_tx, max_rx; | |
889 | ||
890 | if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) { | |
891 | max_tx = 0; | |
892 | max_rx = 0; | |
893 | ||
894 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
895 | if ((master->flags & SPI_MASTER_MUST_TX) && | |
896 | !xfer->tx_buf) | |
897 | max_tx = max(xfer->len, max_tx); | |
898 | if ((master->flags & SPI_MASTER_MUST_RX) && | |
899 | !xfer->rx_buf) | |
900 | max_rx = max(xfer->len, max_rx); | |
901 | } | |
902 | ||
903 | if (max_tx) { | |
904 | tmp = krealloc(master->dummy_tx, max_tx, | |
905 | GFP_KERNEL | GFP_DMA); | |
906 | if (!tmp) | |
907 | return -ENOMEM; | |
908 | master->dummy_tx = tmp; | |
909 | memset(tmp, 0, max_tx); | |
910 | } | |
911 | ||
912 | if (max_rx) { | |
913 | tmp = krealloc(master->dummy_rx, max_rx, | |
914 | GFP_KERNEL | GFP_DMA); | |
915 | if (!tmp) | |
916 | return -ENOMEM; | |
917 | master->dummy_rx = tmp; | |
918 | } | |
919 | ||
920 | if (max_tx || max_rx) { | |
921 | list_for_each_entry(xfer, &msg->transfers, | |
922 | transfer_list) { | |
923 | if (!xfer->tx_buf) | |
924 | xfer->tx_buf = master->dummy_tx; | |
925 | if (!xfer->rx_buf) | |
926 | xfer->rx_buf = master->dummy_rx; | |
927 | } | |
928 | } | |
929 | } | |
930 | ||
931 | return __spi_map_msg(master, msg); | |
932 | } | |
99adef31 | 933 | |
b158935f MB |
934 | /* |
935 | * spi_transfer_one_message - Default implementation of transfer_one_message() | |
936 | * | |
937 | * This is a standard implementation of transfer_one_message() for | |
8ba811a7 | 938 | * drivers which implement a transfer_one() operation. It provides |
b158935f MB |
939 | * standard handling of delays and chip select management. |
940 | */ | |
941 | static int spi_transfer_one_message(struct spi_master *master, | |
942 | struct spi_message *msg) | |
943 | { | |
944 | struct spi_transfer *xfer; | |
b158935f MB |
945 | bool keep_cs = false; |
946 | int ret = 0; | |
682a71b2 | 947 | unsigned long ms = 1; |
eca2ebc7 MS |
948 | struct spi_statistics *statm = &master->statistics; |
949 | struct spi_statistics *stats = &msg->spi->statistics; | |
b158935f MB |
950 | |
951 | spi_set_cs(msg->spi, true); | |
952 | ||
eca2ebc7 MS |
953 | SPI_STATISTICS_INCREMENT_FIELD(statm, messages); |
954 | SPI_STATISTICS_INCREMENT_FIELD(stats, messages); | |
955 | ||
b158935f MB |
956 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { |
957 | trace_spi_transfer_start(msg, xfer); | |
958 | ||
eca2ebc7 MS |
959 | spi_statistics_add_transfer_stats(statm, xfer, master); |
960 | spi_statistics_add_transfer_stats(stats, xfer, master); | |
961 | ||
38ec10f6 MB |
962 | if (xfer->tx_buf || xfer->rx_buf) { |
963 | reinit_completion(&master->xfer_completion); | |
b158935f | 964 | |
38ec10f6 MB |
965 | ret = master->transfer_one(master, msg->spi, xfer); |
966 | if (ret < 0) { | |
eca2ebc7 MS |
967 | SPI_STATISTICS_INCREMENT_FIELD(statm, |
968 | errors); | |
969 | SPI_STATISTICS_INCREMENT_FIELD(stats, | |
970 | errors); | |
38ec10f6 MB |
971 | dev_err(&msg->spi->dev, |
972 | "SPI transfer failed: %d\n", ret); | |
973 | goto out; | |
974 | } | |
b158935f | 975 | |
38ec10f6 MB |
976 | if (ret > 0) { |
977 | ret = 0; | |
978 | ms = xfer->len * 8 * 1000 / xfer->speed_hz; | |
979 | ms += ms + 100; /* some tolerance */ | |
16a0ce4e | 980 | |
38ec10f6 MB |
981 | ms = wait_for_completion_timeout(&master->xfer_completion, |
982 | msecs_to_jiffies(ms)); | |
983 | } | |
16a0ce4e | 984 | |
38ec10f6 | 985 | if (ms == 0) { |
eca2ebc7 MS |
986 | SPI_STATISTICS_INCREMENT_FIELD(statm, |
987 | timedout); | |
988 | SPI_STATISTICS_INCREMENT_FIELD(stats, | |
989 | timedout); | |
38ec10f6 MB |
990 | dev_err(&msg->spi->dev, |
991 | "SPI transfer timed out\n"); | |
992 | msg->status = -ETIMEDOUT; | |
993 | } | |
994 | } else { | |
995 | if (xfer->len) | |
996 | dev_err(&msg->spi->dev, | |
997 | "Bufferless transfer has length %u\n", | |
998 | xfer->len); | |
13a42798 | 999 | } |
b158935f MB |
1000 | |
1001 | trace_spi_transfer_stop(msg, xfer); | |
1002 | ||
1003 | if (msg->status != -EINPROGRESS) | |
1004 | goto out; | |
1005 | ||
1006 | if (xfer->delay_usecs) | |
1007 | udelay(xfer->delay_usecs); | |
1008 | ||
1009 | if (xfer->cs_change) { | |
1010 | if (list_is_last(&xfer->transfer_list, | |
1011 | &msg->transfers)) { | |
1012 | keep_cs = true; | |
1013 | } else { | |
0b73aa63 MB |
1014 | spi_set_cs(msg->spi, false); |
1015 | udelay(10); | |
1016 | spi_set_cs(msg->spi, true); | |
b158935f MB |
1017 | } |
1018 | } | |
1019 | ||
1020 | msg->actual_length += xfer->len; | |
1021 | } | |
1022 | ||
1023 | out: | |
1024 | if (ret != 0 || !keep_cs) | |
1025 | spi_set_cs(msg->spi, false); | |
1026 | ||
1027 | if (msg->status == -EINPROGRESS) | |
1028 | msg->status = ret; | |
1029 | ||
ff61eb42 | 1030 | if (msg->status && master->handle_err) |
b716c4ff AS |
1031 | master->handle_err(master, msg); |
1032 | ||
d780c371 MS |
1033 | spi_res_release(master, msg); |
1034 | ||
b158935f MB |
1035 | spi_finalize_current_message(master); |
1036 | ||
1037 | return ret; | |
1038 | } | |
1039 | ||
1040 | /** | |
1041 | * spi_finalize_current_transfer - report completion of a transfer | |
2c675689 | 1042 | * @master: the master reporting completion |
b158935f MB |
1043 | * |
1044 | * Called by SPI drivers using the core transfer_one_message() | |
1045 | * implementation to notify it that the current interrupt driven | |
9e8f4882 | 1046 | * transfer has finished and the next one may be scheduled. |
b158935f MB |
1047 | */ |
1048 | void spi_finalize_current_transfer(struct spi_master *master) | |
1049 | { | |
1050 | complete(&master->xfer_completion); | |
1051 | } | |
1052 | EXPORT_SYMBOL_GPL(spi_finalize_current_transfer); | |
1053 | ||
ffbbdd21 | 1054 | /** |
fc9e0f71 MB |
1055 | * __spi_pump_messages - function which processes spi message queue |
1056 | * @master: master to process queue for | |
1057 | * @in_kthread: true if we are in the context of the message pump thread | |
49023d2e | 1058 | * @bus_locked: true if the bus mutex is held when calling this function |
ffbbdd21 LW |
1059 | * |
1060 | * This function checks if there is any spi message in the queue that | |
1061 | * needs processing and if so call out to the driver to initialize hardware | |
1062 | * and transfer each message. | |
1063 | * | |
0461a414 MB |
1064 | * Note that it is called both from the kthread itself and also from |
1065 | * inside spi_sync(); the queue extraction handling at the top of the | |
1066 | * function should deal with this safely. | |
ffbbdd21 | 1067 | */ |
49023d2e JH |
1068 | static void __spi_pump_messages(struct spi_master *master, bool in_kthread, |
1069 | bool bus_locked) | |
ffbbdd21 | 1070 | { |
ffbbdd21 LW |
1071 | unsigned long flags; |
1072 | bool was_busy = false; | |
1073 | int ret; | |
1074 | ||
983aee5d | 1075 | /* Lock queue */ |
ffbbdd21 | 1076 | spin_lock_irqsave(&master->queue_lock, flags); |
983aee5d MB |
1077 | |
1078 | /* Make sure we are not already running a message */ | |
1079 | if (master->cur_msg) { | |
1080 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1081 | return; | |
1082 | } | |
1083 | ||
0461a414 MB |
1084 | /* If another context is idling the device then defer */ |
1085 | if (master->idling) { | |
1086 | queue_kthread_work(&master->kworker, &master->pump_messages); | |
1087 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1088 | return; | |
1089 | } | |
1090 | ||
983aee5d | 1091 | /* Check if the queue is idle */ |
ffbbdd21 | 1092 | if (list_empty(&master->queue) || !master->running) { |
b0b36b86 BF |
1093 | if (!master->busy) { |
1094 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1095 | return; | |
ffbbdd21 | 1096 | } |
fc9e0f71 MB |
1097 | |
1098 | /* Only do teardown in the thread */ | |
1099 | if (!in_kthread) { | |
1100 | queue_kthread_work(&master->kworker, | |
1101 | &master->pump_messages); | |
1102 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1103 | return; | |
1104 | } | |
1105 | ||
ffbbdd21 | 1106 | master->busy = false; |
0461a414 | 1107 | master->idling = true; |
ffbbdd21 | 1108 | spin_unlock_irqrestore(&master->queue_lock, flags); |
0461a414 | 1109 | |
3a2eba9b MB |
1110 | kfree(master->dummy_rx); |
1111 | master->dummy_rx = NULL; | |
1112 | kfree(master->dummy_tx); | |
1113 | master->dummy_tx = NULL; | |
b0b36b86 BF |
1114 | if (master->unprepare_transfer_hardware && |
1115 | master->unprepare_transfer_hardware(master)) | |
1116 | dev_err(&master->dev, | |
1117 | "failed to unprepare transfer hardware\n"); | |
49834de2 MB |
1118 | if (master->auto_runtime_pm) { |
1119 | pm_runtime_mark_last_busy(master->dev.parent); | |
1120 | pm_runtime_put_autosuspend(master->dev.parent); | |
1121 | } | |
56ec1978 | 1122 | trace_spi_master_idle(master); |
ffbbdd21 | 1123 | |
0461a414 MB |
1124 | spin_lock_irqsave(&master->queue_lock, flags); |
1125 | master->idling = false; | |
ffbbdd21 LW |
1126 | spin_unlock_irqrestore(&master->queue_lock, flags); |
1127 | return; | |
1128 | } | |
ffbbdd21 | 1129 | |
ffbbdd21 LW |
1130 | /* Extract head of queue */ |
1131 | master->cur_msg = | |
a89e2d27 | 1132 | list_first_entry(&master->queue, struct spi_message, queue); |
ffbbdd21 LW |
1133 | |
1134 | list_del_init(&master->cur_msg->queue); | |
1135 | if (master->busy) | |
1136 | was_busy = true; | |
1137 | else | |
1138 | master->busy = true; | |
1139 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1140 | ||
49834de2 MB |
1141 | if (!was_busy && master->auto_runtime_pm) { |
1142 | ret = pm_runtime_get_sync(master->dev.parent); | |
1143 | if (ret < 0) { | |
1144 | dev_err(&master->dev, "Failed to power device: %d\n", | |
1145 | ret); | |
1146 | return; | |
1147 | } | |
1148 | } | |
1149 | ||
56ec1978 MB |
1150 | if (!was_busy) |
1151 | trace_spi_master_busy(master); | |
1152 | ||
7dfd2bd7 | 1153 | if (!was_busy && master->prepare_transfer_hardware) { |
ffbbdd21 LW |
1154 | ret = master->prepare_transfer_hardware(master); |
1155 | if (ret) { | |
1156 | dev_err(&master->dev, | |
1157 | "failed to prepare transfer hardware\n"); | |
49834de2 MB |
1158 | |
1159 | if (master->auto_runtime_pm) | |
1160 | pm_runtime_put(master->dev.parent); | |
ffbbdd21 LW |
1161 | return; |
1162 | } | |
1163 | } | |
1164 | ||
49023d2e JH |
1165 | if (!bus_locked) |
1166 | mutex_lock(&master->bus_lock_mutex); | |
1167 | ||
56ec1978 MB |
1168 | trace_spi_message_start(master->cur_msg); |
1169 | ||
2841a5fc MB |
1170 | if (master->prepare_message) { |
1171 | ret = master->prepare_message(master, master->cur_msg); | |
1172 | if (ret) { | |
1173 | dev_err(&master->dev, | |
1174 | "failed to prepare message: %d\n", ret); | |
1175 | master->cur_msg->status = ret; | |
1176 | spi_finalize_current_message(master); | |
49023d2e | 1177 | goto out; |
2841a5fc MB |
1178 | } |
1179 | master->cur_msg_prepared = true; | |
1180 | } | |
1181 | ||
99adef31 MB |
1182 | ret = spi_map_msg(master, master->cur_msg); |
1183 | if (ret) { | |
1184 | master->cur_msg->status = ret; | |
1185 | spi_finalize_current_message(master); | |
49023d2e | 1186 | goto out; |
99adef31 MB |
1187 | } |
1188 | ||
ffbbdd21 LW |
1189 | ret = master->transfer_one_message(master, master->cur_msg); |
1190 | if (ret) { | |
1191 | dev_err(&master->dev, | |
1f802f82 | 1192 | "failed to transfer one message from queue\n"); |
49023d2e | 1193 | goto out; |
ffbbdd21 | 1194 | } |
49023d2e JH |
1195 | |
1196 | out: | |
1197 | if (!bus_locked) | |
1198 | mutex_unlock(&master->bus_lock_mutex); | |
62826970 MB |
1199 | |
1200 | /* Prod the scheduler in case transfer_one() was busy waiting */ | |
49023d2e JH |
1201 | if (!ret) |
1202 | cond_resched(); | |
ffbbdd21 LW |
1203 | } |
1204 | ||
fc9e0f71 MB |
1205 | /** |
1206 | * spi_pump_messages - kthread work function which processes spi message queue | |
1207 | * @work: pointer to kthread work struct contained in the master struct | |
1208 | */ | |
1209 | static void spi_pump_messages(struct kthread_work *work) | |
1210 | { | |
1211 | struct spi_master *master = | |
1212 | container_of(work, struct spi_master, pump_messages); | |
1213 | ||
24c8cd1b | 1214 | __spi_pump_messages(master, true, master->bus_lock_flag); |
fc9e0f71 MB |
1215 | } |
1216 | ||
ffbbdd21 LW |
1217 | static int spi_init_queue(struct spi_master *master) |
1218 | { | |
1219 | struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 }; | |
1220 | ||
ffbbdd21 LW |
1221 | master->running = false; |
1222 | master->busy = false; | |
1223 | ||
1224 | init_kthread_worker(&master->kworker); | |
1225 | master->kworker_task = kthread_run(kthread_worker_fn, | |
f170168b | 1226 | &master->kworker, "%s", |
ffbbdd21 LW |
1227 | dev_name(&master->dev)); |
1228 | if (IS_ERR(master->kworker_task)) { | |
1229 | dev_err(&master->dev, "failed to create message pump task\n"); | |
98a8f5a0 | 1230 | return PTR_ERR(master->kworker_task); |
ffbbdd21 LW |
1231 | } |
1232 | init_kthread_work(&master->pump_messages, spi_pump_messages); | |
1233 | ||
1234 | /* | |
1235 | * Master config will indicate if this controller should run the | |
1236 | * message pump with high (realtime) priority to reduce the transfer | |
1237 | * latency on the bus by minimising the delay between a transfer | |
1238 | * request and the scheduling of the message pump thread. Without this | |
1239 | * setting the message pump thread will remain at default priority. | |
1240 | */ | |
1241 | if (master->rt) { | |
1242 | dev_info(&master->dev, | |
1243 | "will run message pump with realtime priority\n"); | |
1244 | sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m); | |
1245 | } | |
1246 | ||
1247 | return 0; | |
1248 | } | |
1249 | ||
1250 | /** | |
1251 | * spi_get_next_queued_message() - called by driver to check for queued | |
1252 | * messages | |
1253 | * @master: the master to check for queued messages | |
1254 | * | |
1255 | * If there are more messages in the queue, the next message is returned from | |
1256 | * this call. | |
97d56dc6 JMC |
1257 | * |
1258 | * Return: the next message in the queue, else NULL if the queue is empty. | |
ffbbdd21 LW |
1259 | */ |
1260 | struct spi_message *spi_get_next_queued_message(struct spi_master *master) | |
1261 | { | |
1262 | struct spi_message *next; | |
1263 | unsigned long flags; | |
1264 | ||
1265 | /* get a pointer to the next message, if any */ | |
1266 | spin_lock_irqsave(&master->queue_lock, flags); | |
1cfd97f9 AL |
1267 | next = list_first_entry_or_null(&master->queue, struct spi_message, |
1268 | queue); | |
ffbbdd21 LW |
1269 | spin_unlock_irqrestore(&master->queue_lock, flags); |
1270 | ||
1271 | return next; | |
1272 | } | |
1273 | EXPORT_SYMBOL_GPL(spi_get_next_queued_message); | |
1274 | ||
1275 | /** | |
1276 | * spi_finalize_current_message() - the current message is complete | |
1277 | * @master: the master to return the message to | |
1278 | * | |
1279 | * Called by the driver to notify the core that the message in the front of the | |
1280 | * queue is complete and can be removed from the queue. | |
1281 | */ | |
1282 | void spi_finalize_current_message(struct spi_master *master) | |
1283 | { | |
1284 | struct spi_message *mesg; | |
1285 | unsigned long flags; | |
2841a5fc | 1286 | int ret; |
ffbbdd21 LW |
1287 | |
1288 | spin_lock_irqsave(&master->queue_lock, flags); | |
1289 | mesg = master->cur_msg; | |
ffbbdd21 LW |
1290 | spin_unlock_irqrestore(&master->queue_lock, flags); |
1291 | ||
99adef31 MB |
1292 | spi_unmap_msg(master, mesg); |
1293 | ||
2841a5fc MB |
1294 | if (master->cur_msg_prepared && master->unprepare_message) { |
1295 | ret = master->unprepare_message(master, mesg); | |
1296 | if (ret) { | |
1297 | dev_err(&master->dev, | |
1298 | "failed to unprepare message: %d\n", ret); | |
1299 | } | |
1300 | } | |
391949b6 | 1301 | |
8e76ef88 MS |
1302 | spin_lock_irqsave(&master->queue_lock, flags); |
1303 | master->cur_msg = NULL; | |
2841a5fc | 1304 | master->cur_msg_prepared = false; |
8e76ef88 MS |
1305 | queue_kthread_work(&master->kworker, &master->pump_messages); |
1306 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1307 | ||
1308 | trace_spi_message_done(mesg); | |
2841a5fc | 1309 | |
ffbbdd21 LW |
1310 | mesg->state = NULL; |
1311 | if (mesg->complete) | |
1312 | mesg->complete(mesg->context); | |
1313 | } | |
1314 | EXPORT_SYMBOL_GPL(spi_finalize_current_message); | |
1315 | ||
1316 | static int spi_start_queue(struct spi_master *master) | |
1317 | { | |
1318 | unsigned long flags; | |
1319 | ||
1320 | spin_lock_irqsave(&master->queue_lock, flags); | |
1321 | ||
1322 | if (master->running || master->busy) { | |
1323 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1324 | return -EBUSY; | |
1325 | } | |
1326 | ||
1327 | master->running = true; | |
1328 | master->cur_msg = NULL; | |
1329 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1330 | ||
1331 | queue_kthread_work(&master->kworker, &master->pump_messages); | |
1332 | ||
1333 | return 0; | |
1334 | } | |
1335 | ||
1336 | static int spi_stop_queue(struct spi_master *master) | |
1337 | { | |
1338 | unsigned long flags; | |
1339 | unsigned limit = 500; | |
1340 | int ret = 0; | |
1341 | ||
1342 | spin_lock_irqsave(&master->queue_lock, flags); | |
1343 | ||
1344 | /* | |
1345 | * This is a bit lame, but is optimized for the common execution path. | |
1346 | * A wait_queue on the master->busy could be used, but then the common | |
1347 | * execution path (pump_messages) would be required to call wake_up or | |
1348 | * friends on every SPI message. Do this instead. | |
1349 | */ | |
1350 | while ((!list_empty(&master->queue) || master->busy) && limit--) { | |
1351 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
f97b26b0 | 1352 | usleep_range(10000, 11000); |
ffbbdd21 LW |
1353 | spin_lock_irqsave(&master->queue_lock, flags); |
1354 | } | |
1355 | ||
1356 | if (!list_empty(&master->queue) || master->busy) | |
1357 | ret = -EBUSY; | |
1358 | else | |
1359 | master->running = false; | |
1360 | ||
1361 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1362 | ||
1363 | if (ret) { | |
1364 | dev_warn(&master->dev, | |
1365 | "could not stop message queue\n"); | |
1366 | return ret; | |
1367 | } | |
1368 | return ret; | |
1369 | } | |
1370 | ||
1371 | static int spi_destroy_queue(struct spi_master *master) | |
1372 | { | |
1373 | int ret; | |
1374 | ||
1375 | ret = spi_stop_queue(master); | |
1376 | ||
1377 | /* | |
1378 | * flush_kthread_worker will block until all work is done. | |
1379 | * If the reason that stop_queue timed out is that the work will never | |
1380 | * finish, then it does no good to call flush/stop thread, so | |
1381 | * return anyway. | |
1382 | */ | |
1383 | if (ret) { | |
1384 | dev_err(&master->dev, "problem destroying queue\n"); | |
1385 | return ret; | |
1386 | } | |
1387 | ||
1388 | flush_kthread_worker(&master->kworker); | |
1389 | kthread_stop(master->kworker_task); | |
1390 | ||
1391 | return 0; | |
1392 | } | |
1393 | ||
0461a414 MB |
1394 | static int __spi_queued_transfer(struct spi_device *spi, |
1395 | struct spi_message *msg, | |
1396 | bool need_pump) | |
ffbbdd21 LW |
1397 | { |
1398 | struct spi_master *master = spi->master; | |
1399 | unsigned long flags; | |
1400 | ||
1401 | spin_lock_irqsave(&master->queue_lock, flags); | |
1402 | ||
1403 | if (!master->running) { | |
1404 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1405 | return -ESHUTDOWN; | |
1406 | } | |
1407 | msg->actual_length = 0; | |
1408 | msg->status = -EINPROGRESS; | |
1409 | ||
1410 | list_add_tail(&msg->queue, &master->queue); | |
0461a414 | 1411 | if (!master->busy && need_pump) |
ffbbdd21 LW |
1412 | queue_kthread_work(&master->kworker, &master->pump_messages); |
1413 | ||
1414 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1415 | return 0; | |
1416 | } | |
1417 | ||
0461a414 MB |
1418 | /** |
1419 | * spi_queued_transfer - transfer function for queued transfers | |
1420 | * @spi: spi device which is requesting transfer | |
1421 | * @msg: spi message which is to handled is queued to driver queue | |
97d56dc6 JMC |
1422 | * |
1423 | * Return: zero on success, else a negative error code. | |
0461a414 MB |
1424 | */ |
1425 | static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg) | |
1426 | { | |
1427 | return __spi_queued_transfer(spi, msg, true); | |
1428 | } | |
1429 | ||
ffbbdd21 LW |
1430 | static int spi_master_initialize_queue(struct spi_master *master) |
1431 | { | |
1432 | int ret; | |
1433 | ||
ffbbdd21 | 1434 | master->transfer = spi_queued_transfer; |
b158935f MB |
1435 | if (!master->transfer_one_message) |
1436 | master->transfer_one_message = spi_transfer_one_message; | |
ffbbdd21 LW |
1437 | |
1438 | /* Initialize and start queue */ | |
1439 | ret = spi_init_queue(master); | |
1440 | if (ret) { | |
1441 | dev_err(&master->dev, "problem initializing queue\n"); | |
1442 | goto err_init_queue; | |
1443 | } | |
c3676d5c | 1444 | master->queued = true; |
ffbbdd21 LW |
1445 | ret = spi_start_queue(master); |
1446 | if (ret) { | |
1447 | dev_err(&master->dev, "problem starting queue\n"); | |
1448 | goto err_start_queue; | |
1449 | } | |
1450 | ||
1451 | return 0; | |
1452 | ||
1453 | err_start_queue: | |
ffbbdd21 | 1454 | spi_destroy_queue(master); |
c3676d5c | 1455 | err_init_queue: |
ffbbdd21 LW |
1456 | return ret; |
1457 | } | |
1458 | ||
1459 | /*-------------------------------------------------------------------------*/ | |
1460 | ||
7cb94361 | 1461 | #if defined(CONFIG_OF) |
aff5e3f8 PA |
1462 | static struct spi_device * |
1463 | of_register_spi_device(struct spi_master *master, struct device_node *nc) | |
1464 | { | |
1465 | struct spi_device *spi; | |
1466 | int rc; | |
1467 | u32 value; | |
1468 | ||
1469 | /* Alloc an spi_device */ | |
1470 | spi = spi_alloc_device(master); | |
1471 | if (!spi) { | |
1472 | dev_err(&master->dev, "spi_device alloc error for %s\n", | |
1473 | nc->full_name); | |
1474 | rc = -ENOMEM; | |
1475 | goto err_out; | |
1476 | } | |
1477 | ||
1478 | /* Select device driver */ | |
1479 | rc = of_modalias_node(nc, spi->modalias, | |
1480 | sizeof(spi->modalias)); | |
1481 | if (rc < 0) { | |
1482 | dev_err(&master->dev, "cannot find modalias for %s\n", | |
1483 | nc->full_name); | |
1484 | goto err_out; | |
1485 | } | |
1486 | ||
1487 | /* Device address */ | |
1488 | rc = of_property_read_u32(nc, "reg", &value); | |
1489 | if (rc) { | |
1490 | dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n", | |
1491 | nc->full_name, rc); | |
1492 | goto err_out; | |
1493 | } | |
1494 | spi->chip_select = value; | |
1495 | ||
1496 | /* Mode (clock phase/polarity/etc.) */ | |
1497 | if (of_find_property(nc, "spi-cpha", NULL)) | |
1498 | spi->mode |= SPI_CPHA; | |
1499 | if (of_find_property(nc, "spi-cpol", NULL)) | |
1500 | spi->mode |= SPI_CPOL; | |
1501 | if (of_find_property(nc, "spi-cs-high", NULL)) | |
1502 | spi->mode |= SPI_CS_HIGH; | |
1503 | if (of_find_property(nc, "spi-3wire", NULL)) | |
1504 | spi->mode |= SPI_3WIRE; | |
1505 | if (of_find_property(nc, "spi-lsb-first", NULL)) | |
1506 | spi->mode |= SPI_LSB_FIRST; | |
1507 | ||
1508 | /* Device DUAL/QUAD mode */ | |
1509 | if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { | |
1510 | switch (value) { | |
1511 | case 1: | |
1512 | break; | |
1513 | case 2: | |
1514 | spi->mode |= SPI_TX_DUAL; | |
1515 | break; | |
1516 | case 4: | |
1517 | spi->mode |= SPI_TX_QUAD; | |
1518 | break; | |
1519 | default: | |
1520 | dev_warn(&master->dev, | |
1521 | "spi-tx-bus-width %d not supported\n", | |
1522 | value); | |
1523 | break; | |
1524 | } | |
1525 | } | |
1526 | ||
1527 | if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { | |
1528 | switch (value) { | |
1529 | case 1: | |
1530 | break; | |
1531 | case 2: | |
1532 | spi->mode |= SPI_RX_DUAL; | |
1533 | break; | |
1534 | case 4: | |
1535 | spi->mode |= SPI_RX_QUAD; | |
1536 | break; | |
1537 | default: | |
1538 | dev_warn(&master->dev, | |
1539 | "spi-rx-bus-width %d not supported\n", | |
1540 | value); | |
1541 | break; | |
1542 | } | |
1543 | } | |
1544 | ||
1545 | /* Device speed */ | |
1546 | rc = of_property_read_u32(nc, "spi-max-frequency", &value); | |
1547 | if (rc) { | |
1548 | dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n", | |
1549 | nc->full_name, rc); | |
1550 | goto err_out; | |
1551 | } | |
1552 | spi->max_speed_hz = value; | |
1553 | ||
aff5e3f8 PA |
1554 | /* Store a pointer to the node in the device structure */ |
1555 | of_node_get(nc); | |
1556 | spi->dev.of_node = nc; | |
1557 | ||
1558 | /* Register the new device */ | |
aff5e3f8 PA |
1559 | rc = spi_add_device(spi); |
1560 | if (rc) { | |
1561 | dev_err(&master->dev, "spi_device register error %s\n", | |
1562 | nc->full_name); | |
1563 | goto err_out; | |
1564 | } | |
1565 | ||
1566 | return spi; | |
1567 | ||
1568 | err_out: | |
1569 | spi_dev_put(spi); | |
1570 | return ERR_PTR(rc); | |
1571 | } | |
1572 | ||
d57a4282 GL |
1573 | /** |
1574 | * of_register_spi_devices() - Register child devices onto the SPI bus | |
1575 | * @master: Pointer to spi_master device | |
1576 | * | |
1577 | * Registers an spi_device for each child node of master node which has a 'reg' | |
1578 | * property. | |
1579 | */ | |
1580 | static void of_register_spi_devices(struct spi_master *master) | |
1581 | { | |
1582 | struct spi_device *spi; | |
1583 | struct device_node *nc; | |
d57a4282 GL |
1584 | |
1585 | if (!master->dev.of_node) | |
1586 | return; | |
1587 | ||
f3b6159e | 1588 | for_each_available_child_of_node(master->dev.of_node, nc) { |
bd6c1644 GU |
1589 | if (of_node_test_and_set_flag(nc, OF_POPULATED)) |
1590 | continue; | |
aff5e3f8 PA |
1591 | spi = of_register_spi_device(master, nc); |
1592 | if (IS_ERR(spi)) | |
1593 | dev_warn(&master->dev, "Failed to create SPI device for %s\n", | |
d57a4282 | 1594 | nc->full_name); |
d57a4282 GL |
1595 | } |
1596 | } | |
1597 | #else | |
1598 | static void of_register_spi_devices(struct spi_master *master) { } | |
1599 | #endif | |
1600 | ||
64bee4d2 MW |
1601 | #ifdef CONFIG_ACPI |
1602 | static int acpi_spi_add_resource(struct acpi_resource *ares, void *data) | |
1603 | { | |
1604 | struct spi_device *spi = data; | |
a0a90718 | 1605 | struct spi_master *master = spi->master; |
64bee4d2 MW |
1606 | |
1607 | if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { | |
1608 | struct acpi_resource_spi_serialbus *sb; | |
1609 | ||
1610 | sb = &ares->data.spi_serial_bus; | |
1611 | if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) { | |
a0a90718 MW |
1612 | /* |
1613 | * ACPI DeviceSelection numbering is handled by the | |
1614 | * host controller driver in Windows and can vary | |
1615 | * from driver to driver. In Linux we always expect | |
1616 | * 0 .. max - 1 so we need to ask the driver to | |
1617 | * translate between the two schemes. | |
1618 | */ | |
1619 | if (master->fw_translate_cs) { | |
1620 | int cs = master->fw_translate_cs(master, | |
1621 | sb->device_selection); | |
1622 | if (cs < 0) | |
1623 | return cs; | |
1624 | spi->chip_select = cs; | |
1625 | } else { | |
1626 | spi->chip_select = sb->device_selection; | |
1627 | } | |
1628 | ||
64bee4d2 MW |
1629 | spi->max_speed_hz = sb->connection_speed; |
1630 | ||
1631 | if (sb->clock_phase == ACPI_SPI_SECOND_PHASE) | |
1632 | spi->mode |= SPI_CPHA; | |
1633 | if (sb->clock_polarity == ACPI_SPI_START_HIGH) | |
1634 | spi->mode |= SPI_CPOL; | |
1635 | if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH) | |
1636 | spi->mode |= SPI_CS_HIGH; | |
1637 | } | |
1638 | } else if (spi->irq < 0) { | |
1639 | struct resource r; | |
1640 | ||
1641 | if (acpi_dev_resource_interrupt(ares, 0, &r)) | |
1642 | spi->irq = r.start; | |
1643 | } | |
1644 | ||
1645 | /* Always tell the ACPI core to skip this resource */ | |
1646 | return 1; | |
1647 | } | |
1648 | ||
1649 | static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, | |
1650 | void *data, void **return_value) | |
1651 | { | |
1652 | struct spi_master *master = data; | |
1653 | struct list_head resource_list; | |
1654 | struct acpi_device *adev; | |
1655 | struct spi_device *spi; | |
1656 | int ret; | |
1657 | ||
1658 | if (acpi_bus_get_device(handle, &adev)) | |
1659 | return AE_OK; | |
1660 | if (acpi_bus_get_status(adev) || !adev->status.present) | |
1661 | return AE_OK; | |
1662 | ||
1663 | spi = spi_alloc_device(master); | |
1664 | if (!spi) { | |
1665 | dev_err(&master->dev, "failed to allocate SPI device for %s\n", | |
1666 | dev_name(&adev->dev)); | |
1667 | return AE_NO_MEMORY; | |
1668 | } | |
1669 | ||
7b199811 | 1670 | ACPI_COMPANION_SET(&spi->dev, adev); |
64bee4d2 MW |
1671 | spi->irq = -1; |
1672 | ||
1673 | INIT_LIST_HEAD(&resource_list); | |
1674 | ret = acpi_dev_get_resources(adev, &resource_list, | |
1675 | acpi_spi_add_resource, spi); | |
1676 | acpi_dev_free_resource_list(&resource_list); | |
1677 | ||
1678 | if (ret < 0 || !spi->max_speed_hz) { | |
1679 | spi_dev_put(spi); | |
1680 | return AE_OK; | |
1681 | } | |
1682 | ||
33ada67d CR |
1683 | if (spi->irq < 0) |
1684 | spi->irq = acpi_dev_gpio_irq_get(adev, 0); | |
1685 | ||
33cf00e5 | 1686 | adev->power.flags.ignore_parent = true; |
cf9eb39c | 1687 | strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias)); |
64bee4d2 | 1688 | if (spi_add_device(spi)) { |
33cf00e5 | 1689 | adev->power.flags.ignore_parent = false; |
64bee4d2 MW |
1690 | dev_err(&master->dev, "failed to add SPI device %s from ACPI\n", |
1691 | dev_name(&adev->dev)); | |
1692 | spi_dev_put(spi); | |
1693 | } | |
1694 | ||
1695 | return AE_OK; | |
1696 | } | |
1697 | ||
1698 | static void acpi_register_spi_devices(struct spi_master *master) | |
1699 | { | |
1700 | acpi_status status; | |
1701 | acpi_handle handle; | |
1702 | ||
29896178 | 1703 | handle = ACPI_HANDLE(master->dev.parent); |
64bee4d2 MW |
1704 | if (!handle) |
1705 | return; | |
1706 | ||
1707 | status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, | |
1708 | acpi_spi_add_device, NULL, | |
1709 | master, NULL); | |
1710 | if (ACPI_FAILURE(status)) | |
1711 | dev_warn(&master->dev, "failed to enumerate SPI slaves\n"); | |
1712 | } | |
1713 | #else | |
1714 | static inline void acpi_register_spi_devices(struct spi_master *master) {} | |
1715 | #endif /* CONFIG_ACPI */ | |
1716 | ||
49dce689 | 1717 | static void spi_master_release(struct device *dev) |
8ae12a0d DB |
1718 | { |
1719 | struct spi_master *master; | |
1720 | ||
49dce689 | 1721 | master = container_of(dev, struct spi_master, dev); |
8ae12a0d DB |
1722 | kfree(master); |
1723 | } | |
1724 | ||
1725 | static struct class spi_master_class = { | |
1726 | .name = "spi_master", | |
1727 | .owner = THIS_MODULE, | |
49dce689 | 1728 | .dev_release = spi_master_release, |
eca2ebc7 | 1729 | .dev_groups = spi_master_groups, |
8ae12a0d DB |
1730 | }; |
1731 | ||
1732 | ||
1733 | /** | |
1734 | * spi_alloc_master - allocate SPI master controller | |
1735 | * @dev: the controller, possibly using the platform_bus | |
33e34dc6 | 1736 | * @size: how much zeroed driver-private data to allocate; the pointer to this |
49dce689 | 1737 | * memory is in the driver_data field of the returned device, |
0c868461 | 1738 | * accessible with spi_master_get_devdata(). |
33e34dc6 | 1739 | * Context: can sleep |
8ae12a0d DB |
1740 | * |
1741 | * This call is used only by SPI master controller drivers, which are the | |
1742 | * only ones directly touching chip registers. It's how they allocate | |
ba1a0513 | 1743 | * an spi_master structure, prior to calling spi_register_master(). |
8ae12a0d | 1744 | * |
97d56dc6 | 1745 | * This must be called from context that can sleep. |
8ae12a0d DB |
1746 | * |
1747 | * The caller is responsible for assigning the bus number and initializing | |
ba1a0513 | 1748 | * the master's methods before calling spi_register_master(); and (after errors |
a394d635 | 1749 | * adding the device) calling spi_master_put() to prevent a memory leak. |
97d56dc6 JMC |
1750 | * |
1751 | * Return: the SPI master structure on success, else NULL. | |
8ae12a0d | 1752 | */ |
e9d5a461 | 1753 | struct spi_master *spi_alloc_master(struct device *dev, unsigned size) |
8ae12a0d DB |
1754 | { |
1755 | struct spi_master *master; | |
1756 | ||
0c868461 DB |
1757 | if (!dev) |
1758 | return NULL; | |
1759 | ||
5fe5f05e | 1760 | master = kzalloc(size + sizeof(*master), GFP_KERNEL); |
8ae12a0d DB |
1761 | if (!master) |
1762 | return NULL; | |
1763 | ||
49dce689 | 1764 | device_initialize(&master->dev); |
1e8a52e1 GL |
1765 | master->bus_num = -1; |
1766 | master->num_chipselect = 1; | |
49dce689 | 1767 | master->dev.class = &spi_master_class; |
157f38f9 | 1768 | master->dev.parent = dev; |
d7e2ee25 | 1769 | pm_suspend_ignore_children(&master->dev, true); |
0c868461 | 1770 | spi_master_set_devdata(master, &master[1]); |
8ae12a0d DB |
1771 | |
1772 | return master; | |
1773 | } | |
1774 | EXPORT_SYMBOL_GPL(spi_alloc_master); | |
1775 | ||
74317984 JCPV |
1776 | #ifdef CONFIG_OF |
1777 | static int of_spi_register_master(struct spi_master *master) | |
1778 | { | |
e80beb27 | 1779 | int nb, i, *cs; |
74317984 JCPV |
1780 | struct device_node *np = master->dev.of_node; |
1781 | ||
1782 | if (!np) | |
1783 | return 0; | |
1784 | ||
1785 | nb = of_gpio_named_count(np, "cs-gpios"); | |
5fe5f05e | 1786 | master->num_chipselect = max_t(int, nb, master->num_chipselect); |
74317984 | 1787 | |
8ec5d84e AL |
1788 | /* Return error only for an incorrectly formed cs-gpios property */ |
1789 | if (nb == 0 || nb == -ENOENT) | |
74317984 | 1790 | return 0; |
8ec5d84e AL |
1791 | else if (nb < 0) |
1792 | return nb; | |
74317984 JCPV |
1793 | |
1794 | cs = devm_kzalloc(&master->dev, | |
1795 | sizeof(int) * master->num_chipselect, | |
1796 | GFP_KERNEL); | |
1797 | master->cs_gpios = cs; | |
1798 | ||
1799 | if (!master->cs_gpios) | |
1800 | return -ENOMEM; | |
1801 | ||
0da83bb1 | 1802 | for (i = 0; i < master->num_chipselect; i++) |
446411e1 | 1803 | cs[i] = -ENOENT; |
74317984 JCPV |
1804 | |
1805 | for (i = 0; i < nb; i++) | |
1806 | cs[i] = of_get_named_gpio(np, "cs-gpios", i); | |
1807 | ||
1808 | return 0; | |
1809 | } | |
1810 | #else | |
1811 | static int of_spi_register_master(struct spi_master *master) | |
1812 | { | |
1813 | return 0; | |
1814 | } | |
1815 | #endif | |
1816 | ||
8ae12a0d DB |
1817 | /** |
1818 | * spi_register_master - register SPI master controller | |
1819 | * @master: initialized master, originally from spi_alloc_master() | |
33e34dc6 | 1820 | * Context: can sleep |
8ae12a0d DB |
1821 | * |
1822 | * SPI master controllers connect to their drivers using some non-SPI bus, | |
1823 | * such as the platform bus. The final stage of probe() in that code | |
1824 | * includes calling spi_register_master() to hook up to this SPI bus glue. | |
1825 | * | |
1826 | * SPI controllers use board specific (often SOC specific) bus numbers, | |
1827 | * and board-specific addressing for SPI devices combines those numbers | |
1828 | * with chip select numbers. Since SPI does not directly support dynamic | |
1829 | * device identification, boards need configuration tables telling which | |
1830 | * chip is at which address. | |
1831 | * | |
1832 | * This must be called from context that can sleep. It returns zero on | |
1833 | * success, else a negative error code (dropping the master's refcount). | |
0c868461 DB |
1834 | * After a successful return, the caller is responsible for calling |
1835 | * spi_unregister_master(). | |
97d56dc6 JMC |
1836 | * |
1837 | * Return: zero on success, else a negative error code. | |
8ae12a0d | 1838 | */ |
e9d5a461 | 1839 | int spi_register_master(struct spi_master *master) |
8ae12a0d | 1840 | { |
e44a45ae | 1841 | static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1); |
49dce689 | 1842 | struct device *dev = master->dev.parent; |
2b9603a0 | 1843 | struct boardinfo *bi; |
8ae12a0d DB |
1844 | int status = -ENODEV; |
1845 | int dynamic = 0; | |
1846 | ||
0c868461 DB |
1847 | if (!dev) |
1848 | return -ENODEV; | |
1849 | ||
74317984 JCPV |
1850 | status = of_spi_register_master(master); |
1851 | if (status) | |
1852 | return status; | |
1853 | ||
082c8cb4 DB |
1854 | /* even if it's just one always-selected device, there must |
1855 | * be at least one chipselect | |
1856 | */ | |
1857 | if (master->num_chipselect == 0) | |
1858 | return -EINVAL; | |
1859 | ||
bb29785e GL |
1860 | if ((master->bus_num < 0) && master->dev.of_node) |
1861 | master->bus_num = of_alias_get_id(master->dev.of_node, "spi"); | |
1862 | ||
8ae12a0d | 1863 | /* convention: dynamically assigned bus IDs count down from the max */ |
a020ed75 | 1864 | if (master->bus_num < 0) { |
082c8cb4 DB |
1865 | /* FIXME switch to an IDR based scheme, something like |
1866 | * I2C now uses, so we can't run out of "dynamic" IDs | |
1867 | */ | |
8ae12a0d | 1868 | master->bus_num = atomic_dec_return(&dyn_bus_id); |
b885244e | 1869 | dynamic = 1; |
8ae12a0d DB |
1870 | } |
1871 | ||
5424d43e MB |
1872 | INIT_LIST_HEAD(&master->queue); |
1873 | spin_lock_init(&master->queue_lock); | |
cf32b71e ES |
1874 | spin_lock_init(&master->bus_lock_spinlock); |
1875 | mutex_init(&master->bus_lock_mutex); | |
1876 | master->bus_lock_flag = 0; | |
b158935f | 1877 | init_completion(&master->xfer_completion); |
6ad45a27 MB |
1878 | if (!master->max_dma_len) |
1879 | master->max_dma_len = INT_MAX; | |
cf32b71e | 1880 | |
8ae12a0d DB |
1881 | /* register the device, then userspace will see it. |
1882 | * registration fails if the bus ID is in use. | |
1883 | */ | |
35f74fca | 1884 | dev_set_name(&master->dev, "spi%u", master->bus_num); |
49dce689 | 1885 | status = device_add(&master->dev); |
b885244e | 1886 | if (status < 0) |
8ae12a0d | 1887 | goto done; |
35f74fca | 1888 | dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev), |
8ae12a0d DB |
1889 | dynamic ? " (dynamic)" : ""); |
1890 | ||
ffbbdd21 LW |
1891 | /* If we're using a queued driver, start the queue */ |
1892 | if (master->transfer) | |
1893 | dev_info(dev, "master is unqueued, this is deprecated\n"); | |
1894 | else { | |
1895 | status = spi_master_initialize_queue(master); | |
1896 | if (status) { | |
e93b0724 | 1897 | device_del(&master->dev); |
ffbbdd21 LW |
1898 | goto done; |
1899 | } | |
1900 | } | |
eca2ebc7 MS |
1901 | /* add statistics */ |
1902 | spin_lock_init(&master->statistics.lock); | |
ffbbdd21 | 1903 | |
2b9603a0 FT |
1904 | mutex_lock(&board_lock); |
1905 | list_add_tail(&master->list, &spi_master_list); | |
1906 | list_for_each_entry(bi, &board_list, list) | |
1907 | spi_match_master_to_boardinfo(master, &bi->board_info); | |
1908 | mutex_unlock(&board_lock); | |
1909 | ||
64bee4d2 | 1910 | /* Register devices from the device tree and ACPI */ |
12b15e83 | 1911 | of_register_spi_devices(master); |
64bee4d2 | 1912 | acpi_register_spi_devices(master); |
8ae12a0d DB |
1913 | done: |
1914 | return status; | |
1915 | } | |
1916 | EXPORT_SYMBOL_GPL(spi_register_master); | |
1917 | ||
666d5b4c MB |
1918 | static void devm_spi_unregister(struct device *dev, void *res) |
1919 | { | |
1920 | spi_unregister_master(*(struct spi_master **)res); | |
1921 | } | |
1922 | ||
1923 | /** | |
1924 | * dev_spi_register_master - register managed SPI master controller | |
1925 | * @dev: device managing SPI master | |
1926 | * @master: initialized master, originally from spi_alloc_master() | |
1927 | * Context: can sleep | |
1928 | * | |
1929 | * Register a SPI device as with spi_register_master() which will | |
1930 | * automatically be unregister | |
97d56dc6 JMC |
1931 | * |
1932 | * Return: zero on success, else a negative error code. | |
666d5b4c MB |
1933 | */ |
1934 | int devm_spi_register_master(struct device *dev, struct spi_master *master) | |
1935 | { | |
1936 | struct spi_master **ptr; | |
1937 | int ret; | |
1938 | ||
1939 | ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL); | |
1940 | if (!ptr) | |
1941 | return -ENOMEM; | |
1942 | ||
1943 | ret = spi_register_master(master); | |
4b92894e | 1944 | if (!ret) { |
666d5b4c MB |
1945 | *ptr = master; |
1946 | devres_add(dev, ptr); | |
1947 | } else { | |
1948 | devres_free(ptr); | |
1949 | } | |
1950 | ||
1951 | return ret; | |
1952 | } | |
1953 | EXPORT_SYMBOL_GPL(devm_spi_register_master); | |
1954 | ||
34860089 | 1955 | static int __unregister(struct device *dev, void *null) |
8ae12a0d | 1956 | { |
34860089 | 1957 | spi_unregister_device(to_spi_device(dev)); |
8ae12a0d DB |
1958 | return 0; |
1959 | } | |
1960 | ||
1961 | /** | |
1962 | * spi_unregister_master - unregister SPI master controller | |
1963 | * @master: the master being unregistered | |
33e34dc6 | 1964 | * Context: can sleep |
8ae12a0d DB |
1965 | * |
1966 | * This call is used only by SPI master controller drivers, which are the | |
1967 | * only ones directly touching chip registers. | |
1968 | * | |
1969 | * This must be called from context that can sleep. | |
1970 | */ | |
1971 | void spi_unregister_master(struct spi_master *master) | |
1972 | { | |
89fc9a1a JG |
1973 | int dummy; |
1974 | ||
ffbbdd21 LW |
1975 | if (master->queued) { |
1976 | if (spi_destroy_queue(master)) | |
1977 | dev_err(&master->dev, "queue remove failed\n"); | |
1978 | } | |
1979 | ||
2b9603a0 FT |
1980 | mutex_lock(&board_lock); |
1981 | list_del(&master->list); | |
1982 | mutex_unlock(&board_lock); | |
1983 | ||
97dbf37d | 1984 | dummy = device_for_each_child(&master->dev, NULL, __unregister); |
49dce689 | 1985 | device_unregister(&master->dev); |
8ae12a0d DB |
1986 | } |
1987 | EXPORT_SYMBOL_GPL(spi_unregister_master); | |
1988 | ||
ffbbdd21 LW |
1989 | int spi_master_suspend(struct spi_master *master) |
1990 | { | |
1991 | int ret; | |
1992 | ||
1993 | /* Basically no-ops for non-queued masters */ | |
1994 | if (!master->queued) | |
1995 | return 0; | |
1996 | ||
1997 | ret = spi_stop_queue(master); | |
1998 | if (ret) | |
1999 | dev_err(&master->dev, "queue stop failed\n"); | |
2000 | ||
2001 | return ret; | |
2002 | } | |
2003 | EXPORT_SYMBOL_GPL(spi_master_suspend); | |
2004 | ||
2005 | int spi_master_resume(struct spi_master *master) | |
2006 | { | |
2007 | int ret; | |
2008 | ||
2009 | if (!master->queued) | |
2010 | return 0; | |
2011 | ||
2012 | ret = spi_start_queue(master); | |
2013 | if (ret) | |
2014 | dev_err(&master->dev, "queue restart failed\n"); | |
2015 | ||
2016 | return ret; | |
2017 | } | |
2018 | EXPORT_SYMBOL_GPL(spi_master_resume); | |
2019 | ||
9f3b795a | 2020 | static int __spi_master_match(struct device *dev, const void *data) |
5ed2c832 DY |
2021 | { |
2022 | struct spi_master *m; | |
9f3b795a | 2023 | const u16 *bus_num = data; |
5ed2c832 DY |
2024 | |
2025 | m = container_of(dev, struct spi_master, dev); | |
2026 | return m->bus_num == *bus_num; | |
2027 | } | |
2028 | ||
8ae12a0d DB |
2029 | /** |
2030 | * spi_busnum_to_master - look up master associated with bus_num | |
2031 | * @bus_num: the master's bus number | |
33e34dc6 | 2032 | * Context: can sleep |
8ae12a0d DB |
2033 | * |
2034 | * This call may be used with devices that are registered after | |
2035 | * arch init time. It returns a refcounted pointer to the relevant | |
2036 | * spi_master (which the caller must release), or NULL if there is | |
2037 | * no such master registered. | |
97d56dc6 JMC |
2038 | * |
2039 | * Return: the SPI master structure on success, else NULL. | |
8ae12a0d DB |
2040 | */ |
2041 | struct spi_master *spi_busnum_to_master(u16 bus_num) | |
2042 | { | |
49dce689 | 2043 | struct device *dev; |
1e9a51dc | 2044 | struct spi_master *master = NULL; |
5ed2c832 | 2045 | |
695794ae | 2046 | dev = class_find_device(&spi_master_class, NULL, &bus_num, |
5ed2c832 DY |
2047 | __spi_master_match); |
2048 | if (dev) | |
2049 | master = container_of(dev, struct spi_master, dev); | |
2050 | /* reference got in class_find_device */ | |
1e9a51dc | 2051 | return master; |
8ae12a0d DB |
2052 | } |
2053 | EXPORT_SYMBOL_GPL(spi_busnum_to_master); | |
2054 | ||
d780c371 MS |
2055 | /*-------------------------------------------------------------------------*/ |
2056 | ||
2057 | /* Core methods for SPI resource management */ | |
2058 | ||
2059 | /** | |
2060 | * spi_res_alloc - allocate a spi resource that is life-cycle managed | |
2061 | * during the processing of a spi_message while using | |
2062 | * spi_transfer_one | |
2063 | * @spi: the spi device for which we allocate memory | |
2064 | * @release: the release code to execute for this resource | |
2065 | * @size: size to alloc and return | |
2066 | * @gfp: GFP allocation flags | |
2067 | * | |
2068 | * Return: the pointer to the allocated data | |
2069 | * | |
2070 | * This may get enhanced in the future to allocate from a memory pool | |
2071 | * of the @spi_device or @spi_master to avoid repeated allocations. | |
2072 | */ | |
2073 | void *spi_res_alloc(struct spi_device *spi, | |
2074 | spi_res_release_t release, | |
2075 | size_t size, gfp_t gfp) | |
2076 | { | |
2077 | struct spi_res *sres; | |
2078 | ||
2079 | sres = kzalloc(sizeof(*sres) + size, gfp); | |
2080 | if (!sres) | |
2081 | return NULL; | |
2082 | ||
2083 | INIT_LIST_HEAD(&sres->entry); | |
2084 | sres->release = release; | |
2085 | ||
2086 | return sres->data; | |
2087 | } | |
2088 | EXPORT_SYMBOL_GPL(spi_res_alloc); | |
2089 | ||
2090 | /** | |
2091 | * spi_res_free - free an spi resource | |
2092 | * @res: pointer to the custom data of a resource | |
2093 | * | |
2094 | */ | |
2095 | void spi_res_free(void *res) | |
2096 | { | |
2097 | struct spi_res *sres = container_of(res, struct spi_res, data); | |
2098 | ||
2099 | if (!res) | |
2100 | return; | |
2101 | ||
2102 | WARN_ON(!list_empty(&sres->entry)); | |
2103 | kfree(sres); | |
2104 | } | |
2105 | EXPORT_SYMBOL_GPL(spi_res_free); | |
2106 | ||
2107 | /** | |
2108 | * spi_res_add - add a spi_res to the spi_message | |
2109 | * @message: the spi message | |
2110 | * @res: the spi_resource | |
2111 | */ | |
2112 | void spi_res_add(struct spi_message *message, void *res) | |
2113 | { | |
2114 | struct spi_res *sres = container_of(res, struct spi_res, data); | |
2115 | ||
2116 | WARN_ON(!list_empty(&sres->entry)); | |
2117 | list_add_tail(&sres->entry, &message->resources); | |
2118 | } | |
2119 | EXPORT_SYMBOL_GPL(spi_res_add); | |
2120 | ||
2121 | /** | |
2122 | * spi_res_release - release all spi resources for this message | |
2123 | * @master: the @spi_master | |
2124 | * @message: the @spi_message | |
2125 | */ | |
2126 | void spi_res_release(struct spi_master *master, | |
2127 | struct spi_message *message) | |
2128 | { | |
2129 | struct spi_res *res; | |
2130 | ||
2131 | while (!list_empty(&message->resources)) { | |
2132 | res = list_last_entry(&message->resources, | |
2133 | struct spi_res, entry); | |
2134 | ||
2135 | if (res->release) | |
2136 | res->release(master, message, res->data); | |
2137 | ||
2138 | list_del(&res->entry); | |
2139 | ||
2140 | kfree(res); | |
2141 | } | |
2142 | } | |
2143 | EXPORT_SYMBOL_GPL(spi_res_release); | |
8ae12a0d DB |
2144 | |
2145 | /*-------------------------------------------------------------------------*/ | |
2146 | ||
523baf5a MS |
2147 | /* Core methods for spi_message alterations */ |
2148 | ||
2149 | static void __spi_replace_transfers_release(struct spi_master *master, | |
2150 | struct spi_message *msg, | |
2151 | void *res) | |
2152 | { | |
2153 | struct spi_replaced_transfers *rxfer = res; | |
2154 | size_t i; | |
2155 | ||
2156 | /* call extra callback if requested */ | |
2157 | if (rxfer->release) | |
2158 | rxfer->release(master, msg, res); | |
2159 | ||
2160 | /* insert replaced transfers back into the message */ | |
2161 | list_splice(&rxfer->replaced_transfers, rxfer->replaced_after); | |
2162 | ||
2163 | /* remove the formerly inserted entries */ | |
2164 | for (i = 0; i < rxfer->inserted; i++) | |
2165 | list_del(&rxfer->inserted_transfers[i].transfer_list); | |
2166 | } | |
2167 | ||
2168 | /** | |
2169 | * spi_replace_transfers - replace transfers with several transfers | |
2170 | * and register change with spi_message.resources | |
2171 | * @msg: the spi_message we work upon | |
2172 | * @xfer_first: the first spi_transfer we want to replace | |
2173 | * @remove: number of transfers to remove | |
2174 | * @insert: the number of transfers we want to insert instead | |
2175 | * @release: extra release code necessary in some circumstances | |
2176 | * @extradatasize: extra data to allocate (with alignment guarantees | |
2177 | * of struct @spi_transfer) | |
05885397 | 2178 | * @gfp: gfp flags |
523baf5a MS |
2179 | * |
2180 | * Returns: pointer to @spi_replaced_transfers, | |
2181 | * PTR_ERR(...) in case of errors. | |
2182 | */ | |
2183 | struct spi_replaced_transfers *spi_replace_transfers( | |
2184 | struct spi_message *msg, | |
2185 | struct spi_transfer *xfer_first, | |
2186 | size_t remove, | |
2187 | size_t insert, | |
2188 | spi_replaced_release_t release, | |
2189 | size_t extradatasize, | |
2190 | gfp_t gfp) | |
2191 | { | |
2192 | struct spi_replaced_transfers *rxfer; | |
2193 | struct spi_transfer *xfer; | |
2194 | size_t i; | |
2195 | ||
2196 | /* allocate the structure using spi_res */ | |
2197 | rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release, | |
2198 | insert * sizeof(struct spi_transfer) | |
2199 | + sizeof(struct spi_replaced_transfers) | |
2200 | + extradatasize, | |
2201 | gfp); | |
2202 | if (!rxfer) | |
2203 | return ERR_PTR(-ENOMEM); | |
2204 | ||
2205 | /* the release code to invoke before running the generic release */ | |
2206 | rxfer->release = release; | |
2207 | ||
2208 | /* assign extradata */ | |
2209 | if (extradatasize) | |
2210 | rxfer->extradata = | |
2211 | &rxfer->inserted_transfers[insert]; | |
2212 | ||
2213 | /* init the replaced_transfers list */ | |
2214 | INIT_LIST_HEAD(&rxfer->replaced_transfers); | |
2215 | ||
2216 | /* assign the list_entry after which we should reinsert | |
2217 | * the @replaced_transfers - it may be spi_message.messages! | |
2218 | */ | |
2219 | rxfer->replaced_after = xfer_first->transfer_list.prev; | |
2220 | ||
2221 | /* remove the requested number of transfers */ | |
2222 | for (i = 0; i < remove; i++) { | |
2223 | /* if the entry after replaced_after it is msg->transfers | |
2224 | * then we have been requested to remove more transfers | |
2225 | * than are in the list | |
2226 | */ | |
2227 | if (rxfer->replaced_after->next == &msg->transfers) { | |
2228 | dev_err(&msg->spi->dev, | |
2229 | "requested to remove more spi_transfers than are available\n"); | |
2230 | /* insert replaced transfers back into the message */ | |
2231 | list_splice(&rxfer->replaced_transfers, | |
2232 | rxfer->replaced_after); | |
2233 | ||
2234 | /* free the spi_replace_transfer structure */ | |
2235 | spi_res_free(rxfer); | |
2236 | ||
2237 | /* and return with an error */ | |
2238 | return ERR_PTR(-EINVAL); | |
2239 | } | |
2240 | ||
2241 | /* remove the entry after replaced_after from list of | |
2242 | * transfers and add it to list of replaced_transfers | |
2243 | */ | |
2244 | list_move_tail(rxfer->replaced_after->next, | |
2245 | &rxfer->replaced_transfers); | |
2246 | } | |
2247 | ||
2248 | /* create copy of the given xfer with identical settings | |
2249 | * based on the first transfer to get removed | |
2250 | */ | |
2251 | for (i = 0; i < insert; i++) { | |
2252 | /* we need to run in reverse order */ | |
2253 | xfer = &rxfer->inserted_transfers[insert - 1 - i]; | |
2254 | ||
2255 | /* copy all spi_transfer data */ | |
2256 | memcpy(xfer, xfer_first, sizeof(*xfer)); | |
2257 | ||
2258 | /* add to list */ | |
2259 | list_add(&xfer->transfer_list, rxfer->replaced_after); | |
2260 | ||
2261 | /* clear cs_change and delay_usecs for all but the last */ | |
2262 | if (i) { | |
2263 | xfer->cs_change = false; | |
2264 | xfer->delay_usecs = 0; | |
2265 | } | |
2266 | } | |
2267 | ||
2268 | /* set up inserted */ | |
2269 | rxfer->inserted = insert; | |
2270 | ||
2271 | /* and register it with spi_res/spi_message */ | |
2272 | spi_res_add(msg, rxfer); | |
2273 | ||
2274 | return rxfer; | |
2275 | } | |
2276 | EXPORT_SYMBOL_GPL(spi_replace_transfers); | |
2277 | ||
08933418 FE |
2278 | static int __spi_split_transfer_maxsize(struct spi_master *master, |
2279 | struct spi_message *msg, | |
2280 | struct spi_transfer **xferp, | |
2281 | size_t maxsize, | |
2282 | gfp_t gfp) | |
d9f12122 MS |
2283 | { |
2284 | struct spi_transfer *xfer = *xferp, *xfers; | |
2285 | struct spi_replaced_transfers *srt; | |
2286 | size_t offset; | |
2287 | size_t count, i; | |
2288 | ||
2289 | /* warn once about this fact that we are splitting a transfer */ | |
2290 | dev_warn_once(&msg->spi->dev, | |
7d62f51e | 2291 | "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n", |
d9f12122 MS |
2292 | xfer->len, maxsize); |
2293 | ||
2294 | /* calculate how many we have to replace */ | |
2295 | count = DIV_ROUND_UP(xfer->len, maxsize); | |
2296 | ||
2297 | /* create replacement */ | |
2298 | srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp); | |
657d32ef DC |
2299 | if (IS_ERR(srt)) |
2300 | return PTR_ERR(srt); | |
d9f12122 MS |
2301 | xfers = srt->inserted_transfers; |
2302 | ||
2303 | /* now handle each of those newly inserted spi_transfers | |
2304 | * note that the replacements spi_transfers all are preset | |
2305 | * to the same values as *xferp, so tx_buf, rx_buf and len | |
2306 | * are all identical (as well as most others) | |
2307 | * so we just have to fix up len and the pointers. | |
2308 | * | |
2309 | * this also includes support for the depreciated | |
2310 | * spi_message.is_dma_mapped interface | |
2311 | */ | |
2312 | ||
2313 | /* the first transfer just needs the length modified, so we | |
2314 | * run it outside the loop | |
2315 | */ | |
c8dab77a | 2316 | xfers[0].len = min_t(size_t, maxsize, xfer[0].len); |
d9f12122 MS |
2317 | |
2318 | /* all the others need rx_buf/tx_buf also set */ | |
2319 | for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) { | |
2320 | /* update rx_buf, tx_buf and dma */ | |
2321 | if (xfers[i].rx_buf) | |
2322 | xfers[i].rx_buf += offset; | |
2323 | if (xfers[i].rx_dma) | |
2324 | xfers[i].rx_dma += offset; | |
2325 | if (xfers[i].tx_buf) | |
2326 | xfers[i].tx_buf += offset; | |
2327 | if (xfers[i].tx_dma) | |
2328 | xfers[i].tx_dma += offset; | |
2329 | ||
2330 | /* update length */ | |
2331 | xfers[i].len = min(maxsize, xfers[i].len - offset); | |
2332 | } | |
2333 | ||
2334 | /* we set up xferp to the last entry we have inserted, | |
2335 | * so that we skip those already split transfers | |
2336 | */ | |
2337 | *xferp = &xfers[count - 1]; | |
2338 | ||
2339 | /* increment statistics counters */ | |
2340 | SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, | |
2341 | transfers_split_maxsize); | |
2342 | SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics, | |
2343 | transfers_split_maxsize); | |
2344 | ||
2345 | return 0; | |
2346 | } | |
2347 | ||
2348 | /** | |
2349 | * spi_split_tranfers_maxsize - split spi transfers into multiple transfers | |
2350 | * when an individual transfer exceeds a | |
2351 | * certain size | |
2352 | * @master: the @spi_master for this transfer | |
3700ce95 MI |
2353 | * @msg: the @spi_message to transform |
2354 | * @maxsize: the maximum when to apply this | |
10f11a22 | 2355 | * @gfp: GFP allocation flags |
d9f12122 MS |
2356 | * |
2357 | * Return: status of transformation | |
2358 | */ | |
2359 | int spi_split_transfers_maxsize(struct spi_master *master, | |
2360 | struct spi_message *msg, | |
2361 | size_t maxsize, | |
2362 | gfp_t gfp) | |
2363 | { | |
2364 | struct spi_transfer *xfer; | |
2365 | int ret; | |
2366 | ||
2367 | /* iterate over the transfer_list, | |
2368 | * but note that xfer is advanced to the last transfer inserted | |
2369 | * to avoid checking sizes again unnecessarily (also xfer does | |
2370 | * potentiall belong to a different list by the time the | |
2371 | * replacement has happened | |
2372 | */ | |
2373 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
2374 | if (xfer->len > maxsize) { | |
2375 | ret = __spi_split_transfer_maxsize( | |
2376 | master, msg, &xfer, maxsize, gfp); | |
2377 | if (ret) | |
2378 | return ret; | |
2379 | } | |
2380 | } | |
2381 | ||
2382 | return 0; | |
2383 | } | |
2384 | EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize); | |
8ae12a0d DB |
2385 | |
2386 | /*-------------------------------------------------------------------------*/ | |
2387 | ||
7d077197 DB |
2388 | /* Core methods for SPI master protocol drivers. Some of the |
2389 | * other core methods are currently defined as inline functions. | |
2390 | */ | |
2391 | ||
63ab645f SB |
2392 | static int __spi_validate_bits_per_word(struct spi_master *master, u8 bits_per_word) |
2393 | { | |
2394 | if (master->bits_per_word_mask) { | |
2395 | /* Only 32 bits fit in the mask */ | |
2396 | if (bits_per_word > 32) | |
2397 | return -EINVAL; | |
2398 | if (!(master->bits_per_word_mask & | |
2399 | SPI_BPW_MASK(bits_per_word))) | |
2400 | return -EINVAL; | |
2401 | } | |
2402 | ||
2403 | return 0; | |
2404 | } | |
2405 | ||
7d077197 DB |
2406 | /** |
2407 | * spi_setup - setup SPI mode and clock rate | |
2408 | * @spi: the device whose settings are being modified | |
2409 | * Context: can sleep, and no requests are queued to the device | |
2410 | * | |
2411 | * SPI protocol drivers may need to update the transfer mode if the | |
2412 | * device doesn't work with its default. They may likewise need | |
2413 | * to update clock rates or word sizes from initial values. This function | |
2414 | * changes those settings, and must be called from a context that can sleep. | |
2415 | * Except for SPI_CS_HIGH, which takes effect immediately, the changes take | |
2416 | * effect the next time the device is selected and data is transferred to | |
2417 | * or from it. When this function returns, the spi device is deselected. | |
2418 | * | |
2419 | * Note that this call will fail if the protocol driver specifies an option | |
2420 | * that the underlying controller or its driver does not support. For | |
2421 | * example, not all hardware supports wire transfers using nine bit words, | |
2422 | * LSB-first wire encoding, or active-high chipselects. | |
97d56dc6 JMC |
2423 | * |
2424 | * Return: zero on success, else a negative error code. | |
7d077197 DB |
2425 | */ |
2426 | int spi_setup(struct spi_device *spi) | |
2427 | { | |
83596fbe | 2428 | unsigned bad_bits, ugly_bits; |
5ab8d262 | 2429 | int status; |
7d077197 | 2430 | |
f477b7fb | 2431 | /* check mode to prevent that DUAL and QUAD set at the same time |
2432 | */ | |
2433 | if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) || | |
2434 | ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) { | |
2435 | dev_err(&spi->dev, | |
2436 | "setup: can not select dual and quad at the same time\n"); | |
2437 | return -EINVAL; | |
2438 | } | |
2439 | /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden | |
2440 | */ | |
2441 | if ((spi->mode & SPI_3WIRE) && (spi->mode & | |
2442 | (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD))) | |
2443 | return -EINVAL; | |
e7db06b5 DB |
2444 | /* help drivers fail *cleanly* when they need options |
2445 | * that aren't supported with their current master | |
2446 | */ | |
2447 | bad_bits = spi->mode & ~spi->master->mode_bits; | |
83596fbe GU |
2448 | ugly_bits = bad_bits & |
2449 | (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD); | |
2450 | if (ugly_bits) { | |
2451 | dev_warn(&spi->dev, | |
2452 | "setup: ignoring unsupported mode bits %x\n", | |
2453 | ugly_bits); | |
2454 | spi->mode &= ~ugly_bits; | |
2455 | bad_bits &= ~ugly_bits; | |
2456 | } | |
e7db06b5 | 2457 | if (bad_bits) { |
eb288a1f | 2458 | dev_err(&spi->dev, "setup: unsupported mode bits %x\n", |
e7db06b5 DB |
2459 | bad_bits); |
2460 | return -EINVAL; | |
2461 | } | |
2462 | ||
7d077197 DB |
2463 | if (!spi->bits_per_word) |
2464 | spi->bits_per_word = 8; | |
2465 | ||
5ab8d262 AS |
2466 | status = __spi_validate_bits_per_word(spi->master, spi->bits_per_word); |
2467 | if (status) | |
2468 | return status; | |
63ab645f | 2469 | |
052eb2d4 AL |
2470 | if (!spi->max_speed_hz) |
2471 | spi->max_speed_hz = spi->master->max_speed_hz; | |
2472 | ||
caae070c LD |
2473 | if (spi->master->setup) |
2474 | status = spi->master->setup(spi); | |
7d077197 | 2475 | |
abeedb01 FCJ |
2476 | spi_set_cs(spi, false); |
2477 | ||
5fe5f05e | 2478 | dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n", |
7d077197 DB |
2479 | (int) (spi->mode & (SPI_CPOL | SPI_CPHA)), |
2480 | (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "", | |
2481 | (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "", | |
2482 | (spi->mode & SPI_3WIRE) ? "3wire, " : "", | |
2483 | (spi->mode & SPI_LOOP) ? "loopback, " : "", | |
2484 | spi->bits_per_word, spi->max_speed_hz, | |
2485 | status); | |
2486 | ||
2487 | return status; | |
2488 | } | |
2489 | EXPORT_SYMBOL_GPL(spi_setup); | |
2490 | ||
90808738 | 2491 | static int __spi_validate(struct spi_device *spi, struct spi_message *message) |
cf32b71e ES |
2492 | { |
2493 | struct spi_master *master = spi->master; | |
e6811d1d | 2494 | struct spi_transfer *xfer; |
6ea31293 | 2495 | int w_size; |
cf32b71e | 2496 | |
24a0013a MB |
2497 | if (list_empty(&message->transfers)) |
2498 | return -EINVAL; | |
24a0013a | 2499 | |
cf32b71e ES |
2500 | /* Half-duplex links include original MicroWire, and ones with |
2501 | * only one data pin like SPI_3WIRE (switches direction) or where | |
2502 | * either MOSI or MISO is missing. They can also be caused by | |
2503 | * software limitations. | |
2504 | */ | |
2505 | if ((master->flags & SPI_MASTER_HALF_DUPLEX) | |
2506 | || (spi->mode & SPI_3WIRE)) { | |
cf32b71e ES |
2507 | unsigned flags = master->flags; |
2508 | ||
2509 | list_for_each_entry(xfer, &message->transfers, transfer_list) { | |
2510 | if (xfer->rx_buf && xfer->tx_buf) | |
2511 | return -EINVAL; | |
2512 | if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf) | |
2513 | return -EINVAL; | |
2514 | if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf) | |
2515 | return -EINVAL; | |
2516 | } | |
2517 | } | |
2518 | ||
e6811d1d | 2519 | /** |
059b8ffe LD |
2520 | * Set transfer bits_per_word and max speed as spi device default if |
2521 | * it is not set for this transfer. | |
f477b7fb | 2522 | * Set transfer tx_nbits and rx_nbits as single transfer default |
2523 | * (SPI_NBITS_SINGLE) if it is not set for this transfer. | |
e6811d1d | 2524 | */ |
77e80588 | 2525 | message->frame_length = 0; |
e6811d1d | 2526 | list_for_each_entry(xfer, &message->transfers, transfer_list) { |
078726ce | 2527 | message->frame_length += xfer->len; |
e6811d1d LD |
2528 | if (!xfer->bits_per_word) |
2529 | xfer->bits_per_word = spi->bits_per_word; | |
a6f87fad AL |
2530 | |
2531 | if (!xfer->speed_hz) | |
059b8ffe | 2532 | xfer->speed_hz = spi->max_speed_hz; |
7dc9fbc3 MB |
2533 | if (!xfer->speed_hz) |
2534 | xfer->speed_hz = master->max_speed_hz; | |
a6f87fad AL |
2535 | |
2536 | if (master->max_speed_hz && | |
2537 | xfer->speed_hz > master->max_speed_hz) | |
2538 | xfer->speed_hz = master->max_speed_hz; | |
56ede94a | 2539 | |
63ab645f SB |
2540 | if (__spi_validate_bits_per_word(master, xfer->bits_per_word)) |
2541 | return -EINVAL; | |
a2fd4f9f | 2542 | |
4d94bd21 II |
2543 | /* |
2544 | * SPI transfer length should be multiple of SPI word size | |
2545 | * where SPI word size should be power-of-two multiple | |
2546 | */ | |
2547 | if (xfer->bits_per_word <= 8) | |
2548 | w_size = 1; | |
2549 | else if (xfer->bits_per_word <= 16) | |
2550 | w_size = 2; | |
2551 | else | |
2552 | w_size = 4; | |
2553 | ||
4d94bd21 | 2554 | /* No partial transfers accepted */ |
6ea31293 | 2555 | if (xfer->len % w_size) |
4d94bd21 II |
2556 | return -EINVAL; |
2557 | ||
a2fd4f9f MB |
2558 | if (xfer->speed_hz && master->min_speed_hz && |
2559 | xfer->speed_hz < master->min_speed_hz) | |
2560 | return -EINVAL; | |
f477b7fb | 2561 | |
2562 | if (xfer->tx_buf && !xfer->tx_nbits) | |
2563 | xfer->tx_nbits = SPI_NBITS_SINGLE; | |
2564 | if (xfer->rx_buf && !xfer->rx_nbits) | |
2565 | xfer->rx_nbits = SPI_NBITS_SINGLE; | |
2566 | /* check transfer tx/rx_nbits: | |
1afd9989 GU |
2567 | * 1. check the value matches one of single, dual and quad |
2568 | * 2. check tx/rx_nbits match the mode in spi_device | |
f477b7fb | 2569 | */ |
db90a441 SP |
2570 | if (xfer->tx_buf) { |
2571 | if (xfer->tx_nbits != SPI_NBITS_SINGLE && | |
2572 | xfer->tx_nbits != SPI_NBITS_DUAL && | |
2573 | xfer->tx_nbits != SPI_NBITS_QUAD) | |
2574 | return -EINVAL; | |
2575 | if ((xfer->tx_nbits == SPI_NBITS_DUAL) && | |
2576 | !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) | |
2577 | return -EINVAL; | |
2578 | if ((xfer->tx_nbits == SPI_NBITS_QUAD) && | |
2579 | !(spi->mode & SPI_TX_QUAD)) | |
2580 | return -EINVAL; | |
db90a441 | 2581 | } |
f477b7fb | 2582 | /* check transfer rx_nbits */ |
db90a441 SP |
2583 | if (xfer->rx_buf) { |
2584 | if (xfer->rx_nbits != SPI_NBITS_SINGLE && | |
2585 | xfer->rx_nbits != SPI_NBITS_DUAL && | |
2586 | xfer->rx_nbits != SPI_NBITS_QUAD) | |
2587 | return -EINVAL; | |
2588 | if ((xfer->rx_nbits == SPI_NBITS_DUAL) && | |
2589 | !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) | |
2590 | return -EINVAL; | |
2591 | if ((xfer->rx_nbits == SPI_NBITS_QUAD) && | |
2592 | !(spi->mode & SPI_RX_QUAD)) | |
2593 | return -EINVAL; | |
db90a441 | 2594 | } |
e6811d1d LD |
2595 | } |
2596 | ||
cf32b71e | 2597 | message->status = -EINPROGRESS; |
90808738 MB |
2598 | |
2599 | return 0; | |
2600 | } | |
2601 | ||
2602 | static int __spi_async(struct spi_device *spi, struct spi_message *message) | |
2603 | { | |
2604 | struct spi_master *master = spi->master; | |
2605 | ||
2606 | message->spi = spi; | |
2607 | ||
eca2ebc7 MS |
2608 | SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_async); |
2609 | SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async); | |
2610 | ||
90808738 MB |
2611 | trace_spi_message_submit(message); |
2612 | ||
cf32b71e ES |
2613 | return master->transfer(spi, message); |
2614 | } | |
2615 | ||
568d0697 DB |
2616 | /** |
2617 | * spi_async - asynchronous SPI transfer | |
2618 | * @spi: device with which data will be exchanged | |
2619 | * @message: describes the data transfers, including completion callback | |
2620 | * Context: any (irqs may be blocked, etc) | |
2621 | * | |
2622 | * This call may be used in_irq and other contexts which can't sleep, | |
2623 | * as well as from task contexts which can sleep. | |
2624 | * | |
2625 | * The completion callback is invoked in a context which can't sleep. | |
2626 | * Before that invocation, the value of message->status is undefined. | |
2627 | * When the callback is issued, message->status holds either zero (to | |
2628 | * indicate complete success) or a negative error code. After that | |
2629 | * callback returns, the driver which issued the transfer request may | |
2630 | * deallocate the associated memory; it's no longer in use by any SPI | |
2631 | * core or controller driver code. | |
2632 | * | |
2633 | * Note that although all messages to a spi_device are handled in | |
2634 | * FIFO order, messages may go to different devices in other orders. | |
2635 | * Some device might be higher priority, or have various "hard" access | |
2636 | * time requirements, for example. | |
2637 | * | |
2638 | * On detection of any fault during the transfer, processing of | |
2639 | * the entire message is aborted, and the device is deselected. | |
2640 | * Until returning from the associated message completion callback, | |
2641 | * no other spi_message queued to that device will be processed. | |
2642 | * (This rule applies equally to all the synchronous transfer calls, | |
2643 | * which are wrappers around this core asynchronous primitive.) | |
97d56dc6 JMC |
2644 | * |
2645 | * Return: zero on success, else a negative error code. | |
568d0697 DB |
2646 | */ |
2647 | int spi_async(struct spi_device *spi, struct spi_message *message) | |
2648 | { | |
2649 | struct spi_master *master = spi->master; | |
cf32b71e ES |
2650 | int ret; |
2651 | unsigned long flags; | |
568d0697 | 2652 | |
90808738 MB |
2653 | ret = __spi_validate(spi, message); |
2654 | if (ret != 0) | |
2655 | return ret; | |
2656 | ||
cf32b71e | 2657 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); |
568d0697 | 2658 | |
cf32b71e ES |
2659 | if (master->bus_lock_flag) |
2660 | ret = -EBUSY; | |
2661 | else | |
2662 | ret = __spi_async(spi, message); | |
568d0697 | 2663 | |
cf32b71e ES |
2664 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); |
2665 | ||
2666 | return ret; | |
568d0697 DB |
2667 | } |
2668 | EXPORT_SYMBOL_GPL(spi_async); | |
2669 | ||
cf32b71e ES |
2670 | /** |
2671 | * spi_async_locked - version of spi_async with exclusive bus usage | |
2672 | * @spi: device with which data will be exchanged | |
2673 | * @message: describes the data transfers, including completion callback | |
2674 | * Context: any (irqs may be blocked, etc) | |
2675 | * | |
2676 | * This call may be used in_irq and other contexts which can't sleep, | |
2677 | * as well as from task contexts which can sleep. | |
2678 | * | |
2679 | * The completion callback is invoked in a context which can't sleep. | |
2680 | * Before that invocation, the value of message->status is undefined. | |
2681 | * When the callback is issued, message->status holds either zero (to | |
2682 | * indicate complete success) or a negative error code. After that | |
2683 | * callback returns, the driver which issued the transfer request may | |
2684 | * deallocate the associated memory; it's no longer in use by any SPI | |
2685 | * core or controller driver code. | |
2686 | * | |
2687 | * Note that although all messages to a spi_device are handled in | |
2688 | * FIFO order, messages may go to different devices in other orders. | |
2689 | * Some device might be higher priority, or have various "hard" access | |
2690 | * time requirements, for example. | |
2691 | * | |
2692 | * On detection of any fault during the transfer, processing of | |
2693 | * the entire message is aborted, and the device is deselected. | |
2694 | * Until returning from the associated message completion callback, | |
2695 | * no other spi_message queued to that device will be processed. | |
2696 | * (This rule applies equally to all the synchronous transfer calls, | |
2697 | * which are wrappers around this core asynchronous primitive.) | |
97d56dc6 JMC |
2698 | * |
2699 | * Return: zero on success, else a negative error code. | |
cf32b71e ES |
2700 | */ |
2701 | int spi_async_locked(struct spi_device *spi, struct spi_message *message) | |
2702 | { | |
2703 | struct spi_master *master = spi->master; | |
2704 | int ret; | |
2705 | unsigned long flags; | |
2706 | ||
90808738 MB |
2707 | ret = __spi_validate(spi, message); |
2708 | if (ret != 0) | |
2709 | return ret; | |
2710 | ||
cf32b71e ES |
2711 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); |
2712 | ||
2713 | ret = __spi_async(spi, message); | |
2714 | ||
2715 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); | |
2716 | ||
2717 | return ret; | |
2718 | ||
2719 | } | |
2720 | EXPORT_SYMBOL_GPL(spi_async_locked); | |
2721 | ||
7d077197 | 2722 | |
556351f1 V |
2723 | int spi_flash_read(struct spi_device *spi, |
2724 | struct spi_flash_read_message *msg) | |
2725 | ||
2726 | { | |
2727 | struct spi_master *master = spi->master; | |
2728 | int ret; | |
2729 | ||
2730 | if ((msg->opcode_nbits == SPI_NBITS_DUAL || | |
2731 | msg->addr_nbits == SPI_NBITS_DUAL) && | |
2732 | !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) | |
2733 | return -EINVAL; | |
2734 | if ((msg->opcode_nbits == SPI_NBITS_QUAD || | |
2735 | msg->addr_nbits == SPI_NBITS_QUAD) && | |
2736 | !(spi->mode & SPI_TX_QUAD)) | |
2737 | return -EINVAL; | |
2738 | if (msg->data_nbits == SPI_NBITS_DUAL && | |
2739 | !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) | |
2740 | return -EINVAL; | |
2741 | if (msg->data_nbits == SPI_NBITS_QUAD && | |
2742 | !(spi->mode & SPI_RX_QUAD)) | |
2743 | return -EINVAL; | |
2744 | ||
2745 | if (master->auto_runtime_pm) { | |
2746 | ret = pm_runtime_get_sync(master->dev.parent); | |
2747 | if (ret < 0) { | |
2748 | dev_err(&master->dev, "Failed to power device: %d\n", | |
2749 | ret); | |
2750 | return ret; | |
2751 | } | |
2752 | } | |
2753 | mutex_lock(&master->bus_lock_mutex); | |
2754 | ret = master->spi_flash_read(spi, msg); | |
2755 | mutex_unlock(&master->bus_lock_mutex); | |
2756 | if (master->auto_runtime_pm) | |
2757 | pm_runtime_put(master->dev.parent); | |
2758 | ||
2759 | return ret; | |
2760 | } | |
2761 | EXPORT_SYMBOL_GPL(spi_flash_read); | |
2762 | ||
7d077197 DB |
2763 | /*-------------------------------------------------------------------------*/ |
2764 | ||
2765 | /* Utility methods for SPI master protocol drivers, layered on | |
2766 | * top of the core. Some other utility methods are defined as | |
2767 | * inline functions. | |
2768 | */ | |
2769 | ||
5d870c8e AM |
2770 | static void spi_complete(void *arg) |
2771 | { | |
2772 | complete(arg); | |
2773 | } | |
2774 | ||
cf32b71e ES |
2775 | static int __spi_sync(struct spi_device *spi, struct spi_message *message, |
2776 | int bus_locked) | |
2777 | { | |
2778 | DECLARE_COMPLETION_ONSTACK(done); | |
2779 | int status; | |
2780 | struct spi_master *master = spi->master; | |
0461a414 MB |
2781 | unsigned long flags; |
2782 | ||
2783 | status = __spi_validate(spi, message); | |
2784 | if (status != 0) | |
2785 | return status; | |
cf32b71e ES |
2786 | |
2787 | message->complete = spi_complete; | |
2788 | message->context = &done; | |
0461a414 | 2789 | message->spi = spi; |
cf32b71e | 2790 | |
eca2ebc7 MS |
2791 | SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_sync); |
2792 | SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync); | |
2793 | ||
cf32b71e ES |
2794 | if (!bus_locked) |
2795 | mutex_lock(&master->bus_lock_mutex); | |
2796 | ||
0461a414 MB |
2797 | /* If we're not using the legacy transfer method then we will |
2798 | * try to transfer in the calling context so special case. | |
2799 | * This code would be less tricky if we could remove the | |
2800 | * support for driver implemented message queues. | |
2801 | */ | |
2802 | if (master->transfer == spi_queued_transfer) { | |
2803 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); | |
2804 | ||
2805 | trace_spi_message_submit(message); | |
2806 | ||
2807 | status = __spi_queued_transfer(spi, message, false); | |
2808 | ||
2809 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); | |
2810 | } else { | |
2811 | status = spi_async_locked(spi, message); | |
2812 | } | |
cf32b71e ES |
2813 | |
2814 | if (!bus_locked) | |
2815 | mutex_unlock(&master->bus_lock_mutex); | |
2816 | ||
2817 | if (status == 0) { | |
0461a414 MB |
2818 | /* Push out the messages in the calling context if we |
2819 | * can. | |
2820 | */ | |
eca2ebc7 MS |
2821 | if (master->transfer == spi_queued_transfer) { |
2822 | SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, | |
2823 | spi_sync_immediate); | |
2824 | SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, | |
2825 | spi_sync_immediate); | |
49023d2e | 2826 | __spi_pump_messages(master, false, bus_locked); |
eca2ebc7 | 2827 | } |
0461a414 | 2828 | |
cf32b71e ES |
2829 | wait_for_completion(&done); |
2830 | status = message->status; | |
2831 | } | |
2832 | message->context = NULL; | |
2833 | return status; | |
2834 | } | |
2835 | ||
8ae12a0d DB |
2836 | /** |
2837 | * spi_sync - blocking/synchronous SPI data transfers | |
2838 | * @spi: device with which data will be exchanged | |
2839 | * @message: describes the data transfers | |
33e34dc6 | 2840 | * Context: can sleep |
8ae12a0d DB |
2841 | * |
2842 | * This call may only be used from a context that may sleep. The sleep | |
2843 | * is non-interruptible, and has no timeout. Low-overhead controller | |
2844 | * drivers may DMA directly into and out of the message buffers. | |
2845 | * | |
2846 | * Note that the SPI device's chip select is active during the message, | |
2847 | * and then is normally disabled between messages. Drivers for some | |
2848 | * frequently-used devices may want to minimize costs of selecting a chip, | |
2849 | * by leaving it selected in anticipation that the next message will go | |
2850 | * to the same chip. (That may increase power usage.) | |
2851 | * | |
0c868461 DB |
2852 | * Also, the caller is guaranteeing that the memory associated with the |
2853 | * message will not be freed before this call returns. | |
2854 | * | |
97d56dc6 | 2855 | * Return: zero on success, else a negative error code. |
8ae12a0d DB |
2856 | */ |
2857 | int spi_sync(struct spi_device *spi, struct spi_message *message) | |
2858 | { | |
24c8cd1b | 2859 | return __spi_sync(spi, message, spi->master->bus_lock_flag); |
8ae12a0d DB |
2860 | } |
2861 | EXPORT_SYMBOL_GPL(spi_sync); | |
2862 | ||
cf32b71e ES |
2863 | /** |
2864 | * spi_sync_locked - version of spi_sync with exclusive bus usage | |
2865 | * @spi: device with which data will be exchanged | |
2866 | * @message: describes the data transfers | |
2867 | * Context: can sleep | |
2868 | * | |
2869 | * This call may only be used from a context that may sleep. The sleep | |
2870 | * is non-interruptible, and has no timeout. Low-overhead controller | |
2871 | * drivers may DMA directly into and out of the message buffers. | |
2872 | * | |
2873 | * This call should be used by drivers that require exclusive access to the | |
25985edc | 2874 | * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must |
cf32b71e ES |
2875 | * be released by a spi_bus_unlock call when the exclusive access is over. |
2876 | * | |
97d56dc6 | 2877 | * Return: zero on success, else a negative error code. |
cf32b71e ES |
2878 | */ |
2879 | int spi_sync_locked(struct spi_device *spi, struct spi_message *message) | |
2880 | { | |
2881 | return __spi_sync(spi, message, 1); | |
2882 | } | |
2883 | EXPORT_SYMBOL_GPL(spi_sync_locked); | |
2884 | ||
2885 | /** | |
2886 | * spi_bus_lock - obtain a lock for exclusive SPI bus usage | |
2887 | * @master: SPI bus master that should be locked for exclusive bus access | |
2888 | * Context: can sleep | |
2889 | * | |
2890 | * This call may only be used from a context that may sleep. The sleep | |
2891 | * is non-interruptible, and has no timeout. | |
2892 | * | |
2893 | * This call should be used by drivers that require exclusive access to the | |
2894 | * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the | |
2895 | * exclusive access is over. Data transfer must be done by spi_sync_locked | |
2896 | * and spi_async_locked calls when the SPI bus lock is held. | |
2897 | * | |
97d56dc6 | 2898 | * Return: always zero. |
cf32b71e ES |
2899 | */ |
2900 | int spi_bus_lock(struct spi_master *master) | |
2901 | { | |
2902 | unsigned long flags; | |
2903 | ||
2904 | mutex_lock(&master->bus_lock_mutex); | |
2905 | ||
2906 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); | |
2907 | master->bus_lock_flag = 1; | |
2908 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); | |
2909 | ||
2910 | /* mutex remains locked until spi_bus_unlock is called */ | |
2911 | ||
2912 | return 0; | |
2913 | } | |
2914 | EXPORT_SYMBOL_GPL(spi_bus_lock); | |
2915 | ||
2916 | /** | |
2917 | * spi_bus_unlock - release the lock for exclusive SPI bus usage | |
2918 | * @master: SPI bus master that was locked for exclusive bus access | |
2919 | * Context: can sleep | |
2920 | * | |
2921 | * This call may only be used from a context that may sleep. The sleep | |
2922 | * is non-interruptible, and has no timeout. | |
2923 | * | |
2924 | * This call releases an SPI bus lock previously obtained by an spi_bus_lock | |
2925 | * call. | |
2926 | * | |
97d56dc6 | 2927 | * Return: always zero. |
cf32b71e ES |
2928 | */ |
2929 | int spi_bus_unlock(struct spi_master *master) | |
2930 | { | |
2931 | master->bus_lock_flag = 0; | |
2932 | ||
2933 | mutex_unlock(&master->bus_lock_mutex); | |
2934 | ||
2935 | return 0; | |
2936 | } | |
2937 | EXPORT_SYMBOL_GPL(spi_bus_unlock); | |
2938 | ||
a9948b61 | 2939 | /* portable code must never pass more than 32 bytes */ |
5fe5f05e | 2940 | #define SPI_BUFSIZ max(32, SMP_CACHE_BYTES) |
8ae12a0d DB |
2941 | |
2942 | static u8 *buf; | |
2943 | ||
2944 | /** | |
2945 | * spi_write_then_read - SPI synchronous write followed by read | |
2946 | * @spi: device with which data will be exchanged | |
2947 | * @txbuf: data to be written (need not be dma-safe) | |
2948 | * @n_tx: size of txbuf, in bytes | |
27570497 JP |
2949 | * @rxbuf: buffer into which data will be read (need not be dma-safe) |
2950 | * @n_rx: size of rxbuf, in bytes | |
33e34dc6 | 2951 | * Context: can sleep |
8ae12a0d DB |
2952 | * |
2953 | * This performs a half duplex MicroWire style transaction with the | |
2954 | * device, sending txbuf and then reading rxbuf. The return value | |
2955 | * is zero for success, else a negative errno status code. | |
b885244e | 2956 | * This call may only be used from a context that may sleep. |
8ae12a0d | 2957 | * |
0c868461 | 2958 | * Parameters to this routine are always copied using a small buffer; |
33e34dc6 DB |
2959 | * portable code should never use this for more than 32 bytes. |
2960 | * Performance-sensitive or bulk transfer code should instead use | |
0c868461 | 2961 | * spi_{async,sync}() calls with dma-safe buffers. |
97d56dc6 JMC |
2962 | * |
2963 | * Return: zero on success, else a negative error code. | |
8ae12a0d DB |
2964 | */ |
2965 | int spi_write_then_read(struct spi_device *spi, | |
0c4a1590 MB |
2966 | const void *txbuf, unsigned n_tx, |
2967 | void *rxbuf, unsigned n_rx) | |
8ae12a0d | 2968 | { |
068f4070 | 2969 | static DEFINE_MUTEX(lock); |
8ae12a0d DB |
2970 | |
2971 | int status; | |
2972 | struct spi_message message; | |
bdff549e | 2973 | struct spi_transfer x[2]; |
8ae12a0d DB |
2974 | u8 *local_buf; |
2975 | ||
b3a223ee MB |
2976 | /* Use preallocated DMA-safe buffer if we can. We can't avoid |
2977 | * copying here, (as a pure convenience thing), but we can | |
2978 | * keep heap costs out of the hot path unless someone else is | |
2979 | * using the pre-allocated buffer or the transfer is too large. | |
8ae12a0d | 2980 | */ |
b3a223ee | 2981 | if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) { |
2cd94c8a MB |
2982 | local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), |
2983 | GFP_KERNEL | GFP_DMA); | |
b3a223ee MB |
2984 | if (!local_buf) |
2985 | return -ENOMEM; | |
2986 | } else { | |
2987 | local_buf = buf; | |
2988 | } | |
8ae12a0d | 2989 | |
8275c642 | 2990 | spi_message_init(&message); |
5fe5f05e | 2991 | memset(x, 0, sizeof(x)); |
bdff549e DB |
2992 | if (n_tx) { |
2993 | x[0].len = n_tx; | |
2994 | spi_message_add_tail(&x[0], &message); | |
2995 | } | |
2996 | if (n_rx) { | |
2997 | x[1].len = n_rx; | |
2998 | spi_message_add_tail(&x[1], &message); | |
2999 | } | |
8275c642 | 3000 | |
8ae12a0d | 3001 | memcpy(local_buf, txbuf, n_tx); |
bdff549e DB |
3002 | x[0].tx_buf = local_buf; |
3003 | x[1].rx_buf = local_buf + n_tx; | |
8ae12a0d DB |
3004 | |
3005 | /* do the i/o */ | |
8ae12a0d | 3006 | status = spi_sync(spi, &message); |
9b938b74 | 3007 | if (status == 0) |
bdff549e | 3008 | memcpy(rxbuf, x[1].rx_buf, n_rx); |
8ae12a0d | 3009 | |
bdff549e | 3010 | if (x[0].tx_buf == buf) |
068f4070 | 3011 | mutex_unlock(&lock); |
8ae12a0d DB |
3012 | else |
3013 | kfree(local_buf); | |
3014 | ||
3015 | return status; | |
3016 | } | |
3017 | EXPORT_SYMBOL_GPL(spi_write_then_read); | |
3018 | ||
3019 | /*-------------------------------------------------------------------------*/ | |
3020 | ||
ce79d54a PA |
3021 | #if IS_ENABLED(CONFIG_OF_DYNAMIC) |
3022 | static int __spi_of_device_match(struct device *dev, void *data) | |
3023 | { | |
3024 | return dev->of_node == data; | |
3025 | } | |
3026 | ||
3027 | /* must call put_device() when done with returned spi_device device */ | |
3028 | static struct spi_device *of_find_spi_device_by_node(struct device_node *node) | |
3029 | { | |
3030 | struct device *dev = bus_find_device(&spi_bus_type, NULL, node, | |
3031 | __spi_of_device_match); | |
3032 | return dev ? to_spi_device(dev) : NULL; | |
3033 | } | |
3034 | ||
3035 | static int __spi_of_master_match(struct device *dev, const void *data) | |
3036 | { | |
3037 | return dev->of_node == data; | |
3038 | } | |
3039 | ||
3040 | /* the spi masters are not using spi_bus, so we find it with another way */ | |
3041 | static struct spi_master *of_find_spi_master_by_node(struct device_node *node) | |
3042 | { | |
3043 | struct device *dev; | |
3044 | ||
3045 | dev = class_find_device(&spi_master_class, NULL, node, | |
3046 | __spi_of_master_match); | |
3047 | if (!dev) | |
3048 | return NULL; | |
3049 | ||
3050 | /* reference got in class_find_device */ | |
3051 | return container_of(dev, struct spi_master, dev); | |
3052 | } | |
3053 | ||
3054 | static int of_spi_notify(struct notifier_block *nb, unsigned long action, | |
3055 | void *arg) | |
3056 | { | |
3057 | struct of_reconfig_data *rd = arg; | |
3058 | struct spi_master *master; | |
3059 | struct spi_device *spi; | |
3060 | ||
3061 | switch (of_reconfig_get_state_change(action, arg)) { | |
3062 | case OF_RECONFIG_CHANGE_ADD: | |
3063 | master = of_find_spi_master_by_node(rd->dn->parent); | |
3064 | if (master == NULL) | |
3065 | return NOTIFY_OK; /* not for us */ | |
3066 | ||
bd6c1644 GU |
3067 | if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { |
3068 | put_device(&master->dev); | |
3069 | return NOTIFY_OK; | |
3070 | } | |
3071 | ||
ce79d54a PA |
3072 | spi = of_register_spi_device(master, rd->dn); |
3073 | put_device(&master->dev); | |
3074 | ||
3075 | if (IS_ERR(spi)) { | |
3076 | pr_err("%s: failed to create for '%s'\n", | |
3077 | __func__, rd->dn->full_name); | |
3078 | return notifier_from_errno(PTR_ERR(spi)); | |
3079 | } | |
3080 | break; | |
3081 | ||
3082 | case OF_RECONFIG_CHANGE_REMOVE: | |
bd6c1644 GU |
3083 | /* already depopulated? */ |
3084 | if (!of_node_check_flag(rd->dn, OF_POPULATED)) | |
3085 | return NOTIFY_OK; | |
3086 | ||
ce79d54a PA |
3087 | /* find our device by node */ |
3088 | spi = of_find_spi_device_by_node(rd->dn); | |
3089 | if (spi == NULL) | |
3090 | return NOTIFY_OK; /* no? not meant for us */ | |
3091 | ||
3092 | /* unregister takes one ref away */ | |
3093 | spi_unregister_device(spi); | |
3094 | ||
3095 | /* and put the reference of the find */ | |
3096 | put_device(&spi->dev); | |
3097 | break; | |
3098 | } | |
3099 | ||
3100 | return NOTIFY_OK; | |
3101 | } | |
3102 | ||
3103 | static struct notifier_block spi_of_notifier = { | |
3104 | .notifier_call = of_spi_notify, | |
3105 | }; | |
3106 | #else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */ | |
3107 | extern struct notifier_block spi_of_notifier; | |
3108 | #endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */ | |
3109 | ||
8ae12a0d DB |
3110 | static int __init spi_init(void) |
3111 | { | |
b885244e DB |
3112 | int status; |
3113 | ||
e94b1766 | 3114 | buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); |
b885244e DB |
3115 | if (!buf) { |
3116 | status = -ENOMEM; | |
3117 | goto err0; | |
3118 | } | |
3119 | ||
3120 | status = bus_register(&spi_bus_type); | |
3121 | if (status < 0) | |
3122 | goto err1; | |
8ae12a0d | 3123 | |
b885244e DB |
3124 | status = class_register(&spi_master_class); |
3125 | if (status < 0) | |
3126 | goto err2; | |
ce79d54a | 3127 | |
5267720e | 3128 | if (IS_ENABLED(CONFIG_OF_DYNAMIC)) |
ce79d54a PA |
3129 | WARN_ON(of_reconfig_notifier_register(&spi_of_notifier)); |
3130 | ||
8ae12a0d | 3131 | return 0; |
b885244e DB |
3132 | |
3133 | err2: | |
3134 | bus_unregister(&spi_bus_type); | |
3135 | err1: | |
3136 | kfree(buf); | |
3137 | buf = NULL; | |
3138 | err0: | |
3139 | return status; | |
8ae12a0d | 3140 | } |
b885244e | 3141 | |
8ae12a0d DB |
3142 | /* board_info is normally registered in arch_initcall(), |
3143 | * but even essential drivers wait till later | |
b885244e DB |
3144 | * |
3145 | * REVISIT only boardinfo really needs static linking. the rest (device and | |
3146 | * driver registration) _could_ be dynamically linked (modular) ... costs | |
3147 | * include needing to have boardinfo data structures be much more public. | |
8ae12a0d | 3148 | */ |
673c0c00 | 3149 | postcore_initcall(spi_init); |
8ae12a0d | 3150 |