]>
Commit | Line | Data |
---|---|---|
81dee67e SM |
1 | Introduction: |
2 | SM750 of Silicon MOtion is pci express display controller device. | |
3 | The SM750 embedded graphics features include: | |
4 | - dual display | |
5 | - 2D acceleration | |
6 | - 16MB integrated video memory | |
7 | ||
8 | About the kernel module paramter of driver: | |
9 | ||
10 | Use 1280,8bpp index color and 60 hz mode: | |
11 | insmod ./sm750fb.ko g_option="1280x1024-8@60" | |
12 | ||
13 | Disable MTRR,Disable 2d acceleration,Disable hardware cursor, | |
14 | and use a 800x600 mode : | |
15 | insmod ./sm750fb.ko g_option="noaccel:nomtrr:nohwc:800x600" | |
16 | ||
17 | dual frame buffer for driver with "dual" parameter | |
18 | insmod ./sm750fb.ko g_option="dual,800x600:1024x768" | |
19 | it will create fb0 and fb1 (or fb1,fb2 if fb0 already exist) under /dev | |
20 | and user can use con2fb to link fbX and ttyX | |
21 | ||
22 | Notes: | |
23 | 1) if you build the driver with built-in method, the paramter | |
24 | you edited in the grub config file will be also the | |
25 | same format as above modular method,but additionaly add | |
26 | "video=sm750fb:" | |
27 | ahead of parameters,so,it looks like: | |
28 | video=sm750fb:noaccel,1280x1024@60,otherparam,etc... | |
29 | it equal to modular method with below command: | |
30 | insmod ./sm750fb.ko g_option="noaccel:1280x1024@60:otherparm:etc..." | |
31 | ||
32 | 2) if you put 800x600 into the paramter without bpp and | |
33 | refresh rate, kernel driver will defaulty use 16bpp and 60hz | |
34 | ||
35 | Important: | |
36 | if you have vesafb enabled in your config then /dev/fb0 will be created by vesafb | |
37 | and this driver will use fb1, fb2. In that case, you need to configure your X-server | |
38 | to use fb1. Another simple althernative is to disable vesafb from your config. |