[mirror_ubuntu-artful-kernel.git] / drivers / staging / speakup / serialio.c

#include <linux/interrupt.h>
#include <linux/ioport.h>

#include "spk_types.h"
#include "speakup.h"
#include "spk_priv.h"
#include "serialio.h"

#ifndef SERIAL_PORT_DFNS
#define SERIAL_PORT_DFNS
#endif

static void start_serial_interrupt(int irq);

static const struct old_serial_port rs_table[] = {
	SERIAL_PORT_DFNS
};
static const struct old_serial_port *serstate;
static int timeouts;

const struct old_serial_port *spk_serial_init(int index)
{
	int baud = 9600, quot = 0;
	unsigned int cval = 0;
	int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
	const struct old_serial_port *ser = rs_table + index;
	int err;

	/*	Divisor, bytesize and parity */
	quot = ser->baud_base / baud;
	cval = cflag & (CSIZE | CSTOPB);
#if defined(__powerpc__) || defined(__alpha__)
	cval >>= 8;
#else /* !__powerpc__ && !__alpha__ */
	cval >>= 4;
#endif /* !__powerpc__ && !__alpha__ */
	if (cflag & PARENB)
		cval |= UART_LCR_PARITY;
	if (!(cflag & PARODD))
		cval |= UART_LCR_EPAR;
	if (synth_request_region(ser->port, 8)) {
		/* try to take it back. */
		pr_info("Ports not available, trying to steal them\n");
		__release_region(&ioport_resource, ser->port, 8);
		err = synth_request_region(ser->port, 8);
		if (err) {
			pr_warn("Unable to allocate port at %x, errno %i",
				ser->port, err);
			return NULL;
		}
	}

	/*	Disable UART interrupts, set DTR and RTS high
	 *	and set speed. */
	outb(cval | UART_LCR_DLAB, ser->port + UART_LCR);	/* set DLAB */
	outb(quot & 0xff, ser->port + UART_DLL);	/* LS of divisor */
	outb(quot >> 8, ser->port + UART_DLM);		/* MS of divisor */
	outb(cval, ser->port + UART_LCR);		/* reset DLAB */

	/* Turn off Interrupts */
	outb(0, ser->port + UART_IER);
	outb(UART_MCR_DTR | UART_MCR_RTS, ser->port + UART_MCR);

	/* If we read 0xff from the LSR, there is no UART here. */
	if (inb(ser->port + UART_LSR) == 0xff) {
		synth_release_region(ser->port, 8);
		serstate = NULL;
		return NULL;
	}

	mdelay(1);
	speakup_info.port_tts = ser->port;
	serstate = ser;

	start_serial_interrupt(ser->irq);

	return ser;
}

static irqreturn_t synth_readbuf_handler(int irq, void *dev_id)
{
	unsigned long flags;
/*printk(KERN_ERR "in irq\n"); */
/*pr_warn("in IRQ\n"); */
	int c;

	spin_lock_irqsave(&speakup_info.spinlock, flags);
	while (inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR) {

		c = inb_p(speakup_info.port_tts+UART_RX);
		synth->read_buff_add((u_char) c);
/*printk(KERN_ERR "c = %d\n", c); */
/*pr_warn("C = %d\n", c); */
	}
	spin_unlock_irqrestore(&speakup_info.spinlock, flags);
	return IRQ_HANDLED;
}

static void start_serial_interrupt(int irq)
{
	int rv;

	if (synth->read_buff_add == NULL)
		return;

	rv = request_irq(irq, synth_readbuf_handler, IRQF_SHARED,
			 "serial", (void *) synth_readbuf_handler);

	if (rv)
		pr_err("Unable to request Speakup serial I R Q\n");
	/* Set MCR */
	outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2,
			speakup_info.port_tts + UART_MCR);
	/* Turn on Interrupts */
	outb(UART_IER_MSI|UART_IER_RLSI|UART_IER_RDI,
			speakup_info.port_tts + UART_IER);
	inb(speakup_info.port_tts+UART_LSR);
	inb(speakup_info.port_tts+UART_RX);
	inb(speakup_info.port_tts+UART_IIR);
	inb(speakup_info.port_tts+UART_MSR);
	outb(1, speakup_info.port_tts + UART_FCR);	/* Turn FIFO On */
}

void spk_stop_serial_interrupt(void)
{
	if (speakup_info.port_tts == 0)
		return;

	if (synth->read_buff_add == NULL)
		return;

	/* Turn off interrupts */
	outb(0, speakup_info.port_tts+UART_IER);
	/* Free IRQ */
	free_irq(serstate->irq, (void *) synth_readbuf_handler);
}

int spk_wait_for_xmitr(void)
{
	int tmout = SPK_XMITR_TIMEOUT;

	if ((synth->alive) && (timeouts >= NUM_DISABLE_TIMEOUTS)) {
		pr_warn("%s: too many timeouts, deactivating speakup\n",
			synth->long_name);
		synth->alive = 0;
		/* No synth any more, so nobody will restart TTYs, and we thus
		 * need to do it ourselves.  Now that there is no synth we can
		 * let application flood anyway */
		speakup_start_ttys();
		timeouts = 0;
		return 0;
	}
	while (spk_serial_tx_busy()) {
		if (--tmout == 0) {
			pr_warn("%s: timed out (tx busy)\n", synth->long_name);
			timeouts++;
			return 0;
		}
		udelay(1);
	}
	tmout = SPK_CTS_TIMEOUT;
	while (!((inb_p(speakup_info.port_tts + UART_MSR)) & UART_MSR_CTS)) {
		/* CTS */
		if (--tmout == 0) {
			/* pr_warn("%s: timed out (cts)\n",
			 * synth->long_name); */
			timeouts++;
			return 0;
		}
		udelay(1);
	}
	timeouts = 0;
	return 1;
}

unsigned char spk_serial_in(void)
{
	int tmout = SPK_SERIAL_TIMEOUT;

	while (!(inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR)) {
		if (--tmout == 0) {
			pr_warn("time out while waiting for input.\n");
			return 0xff;
		}
		udelay(1);
	}
	return inb_p(speakup_info.port_tts + UART_RX);
}
EXPORT_SYMBOL_GPL(spk_serial_in);

unsigned char spk_serial_in_nowait(void)
{
	unsigned char lsr;

	lsr = inb_p(speakup_info.port_tts + UART_LSR);
	if (!(lsr & UART_LSR_DR))
		return 0;
	return inb_p(speakup_info.port_tts + UART_RX);
}
EXPORT_SYMBOL_GPL(spk_serial_in_nowait);

int spk_serial_out(const char ch)
{
	if (synth->alive && spk_wait_for_xmitr()) {
		outb_p(ch, speakup_info.port_tts);
		return 1;
	}
	return 0;
}
EXPORT_SYMBOL_GPL(spk_serial_out);

void spk_serial_release(void)
{
	if (speakup_info.port_tts == 0)
		return;
	synth_release_region(speakup_info.port_tts, 8);
	speakup_info.port_tts = 0;
}
EXPORT_SYMBOL_GPL(spk_serial_release);
Commit	Line	Data
c6e3fd22 WH	1	#include <linux/interrupt.h>
	2	#include <linux/ioport.h>
	3
	4	#include "spk_types.h"
	5	#include "speakup.h"
	6	#include "spk_priv.h"
	7	#include "serialio.h"
	8
5e6dc548 CG	9	#ifndef SERIAL_PORT_DFNS
	10	#define SERIAL_PORT_DFNS
	11	#endif
	12
c6e3fd22 WH	13	static void start_serial_interrupt(int irq);
c6e3fd22 WH	14
3ee0017e	15	static const struct old_serial_port rs_table[] = {
c6e3fd22 WH	16	SERIAL_PORT_DFNS
c6e3fd22 WH	17	};
3ee0017e	18	static const struct old_serial_port *serstate;
c6e3fd22 WH	19	static int timeouts;
c6e3fd22 WH	20
3ee0017e	21	const struct old_serial_port *spk_serial_init(int index)
c6e3fd22 WH	22	{
	23	int baud = 9600, quot = 0;
	24	unsigned int cval = 0;
	25	int cflag = CREAD \| HUPCL \| CLOCAL \| B9600 \| CS8;
3ee0017e	26	const struct old_serial_port *ser = rs_table + index;
c6e3fd22 WH	27	int err;
c6e3fd22 WH	28
c6e3fd22 WH	29	/* Divisor, bytesize and parity */
	30	quot = ser->baud_base / baud;
	31	cval = cflag & (CSIZE \| CSTOPB);
	32	#if defined(__powerpc__) \|\| defined(__alpha__)
	33	cval >>= 8;
	34	#else /* !__powerpc__ && !__alpha__ */
	35	cval >>= 4;
	36	#endif /* !__powerpc__ && !__alpha__ */
	37	if (cflag & PARENB)
	38	cval \|= UART_LCR_PARITY;
	39	if (!(cflag & PARODD))
	40	cval \|= UART_LCR_EPAR;
	41	if (synth_request_region(ser->port, 8)) {
	42	/* try to take it back. */
3a046c19	43	pr_info("Ports not available, trying to steal them\n");
c6e3fd22 WH	44	__release_region(&ioport_resource, ser->port, 8);
	45	err = synth_request_region(ser->port, 8);
	46	if (err) {
3ee0017e	47	pr_warn("Unable to allocate port at %x, errno %i",
baf9ac9f	48	ser->port, err);
c6e3fd22 WH	49	return NULL;
	50	}
	51	}
	52
	53	/* Disable UART interrupts, set DTR and RTS high
	54	* and set speed. */
	55	outb(cval \| UART_LCR_DLAB, ser->port + UART_LCR); /* set DLAB */
	56	outb(quot & 0xff, ser->port + UART_DLL); /* LS of divisor */
	57	outb(quot >> 8, ser->port + UART_DLM); /* MS of divisor */
	58	outb(cval, ser->port + UART_LCR); /* reset DLAB */
	59
	60	/* Turn off Interrupts */
	61	outb(0, ser->port + UART_IER);
	62	outb(UART_MCR_DTR \| UART_MCR_RTS, ser->port + UART_MCR);
	63
	64	/* If we read 0xff from the LSR, there is no UART here. */
	65	if (inb(ser->port + UART_LSR) == 0xff) {
	66	synth_release_region(ser->port, 8);
	67	serstate = NULL;
	68	return NULL;
	69	}
	70
	71	mdelay(1);
	72	speakup_info.port_tts = ser->port;
	73	serstate = ser;
	74
	75	start_serial_interrupt(ser->irq);
	76
	77	return ser;
	78	}
	79
	80	static irqreturn_t synth_readbuf_handler(int irq, void *dev_id)
	81	{
	82	unsigned long flags;
	83	/printk(KERN_ERR "in irq\n"); /
	84	/pr_warn("in IRQ\n"); /
	85	int c;
8e69a811	86
9fb31b1a	87	spin_lock_irqsave(&speakup_info.spinlock, flags);
c6e3fd22 WH	88	while (inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR) {
	89
	90	c = inb_p(speakup_info.port_tts+UART_RX);
	91	synth->read_buff_add((u_char) c);
	92	/printk(KERN_ERR "c = %d\n", c); /
	93	/pr_warn("C = %d\n", c); /
	94	}
9fb31b1a	95	spin_unlock_irqrestore(&speakup_info.spinlock, flags);
c6e3fd22 WH	96	return IRQ_HANDLED;
	97	}
	98
	99	static void start_serial_interrupt(int irq)
	100	{
	101	int rv;
	102
	103	if (synth->read_buff_add == NULL)
	104	return;
	105
	106	rv = request_irq(irq, synth_readbuf_handler, IRQF_SHARED,
	107	"serial", (void *) synth_readbuf_handler);
	108
	109	if (rv)
3a046c19	110	pr_err("Unable to request Speakup serial I R Q\n");
c6e3fd22 WH	111	/* Set MCR */
	112	outb(UART_MCR_DTR \| UART_MCR_RTS \| UART_MCR_OUT2,
	113	speakup_info.port_tts + UART_MCR);
	114	/* Turn on Interrupts */
	115	outb(UART_IER_MSI\|UART_IER_RLSI\|UART_IER_RDI,
	116	speakup_info.port_tts + UART_IER);
	117	inb(speakup_info.port_tts+UART_LSR);
	118	inb(speakup_info.port_tts+UART_RX);
	119	inb(speakup_info.port_tts+UART_IIR);
	120	inb(speakup_info.port_tts+UART_MSR);
	121	outb(1, speakup_info.port_tts + UART_FCR); /* Turn FIFO On */
	122	}
	123
ca2beaf8	124	void spk_stop_serial_interrupt(void)
c6e3fd22 WH	125	{
	126	if (speakup_info.port_tts == 0)
	127	return;
	128
	129	if (synth->read_buff_add == NULL)
	130	return;
	131
	132	/* Turn off interrupts */
	133	outb(0, speakup_info.port_tts+UART_IER);
	134	/* Free IRQ */
	135	free_irq(serstate->irq, (void *) synth_readbuf_handler);
	136	}
	137
ca2beaf8	138	int spk_wait_for_xmitr(void)
c6e3fd22 WH	139	{
c6e3fd22 WH	140	int tmout = SPK_XMITR_TIMEOUT;
8e69a811	141
c6e3fd22	142	if ((synth->alive) && (timeouts >= NUM_DISABLE_TIMEOUTS)) {
baf9ac9f WH	143	pr_warn("%s: too many timeouts, deactivating speakup\n",
baf9ac9f WH	144	synth->long_name);
c6e3fd22 WH	145	synth->alive = 0;
	146	/* No synth any more, so nobody will restart TTYs, and we thus
	147	* need to do it ourselves. Now that there is no synth we can
	148	* let application flood anyway */
	149	speakup_start_ttys();
	150	timeouts = 0;
	151	return 0;
	152	}
	153	while (spk_serial_tx_busy()) {
	154	if (--tmout == 0) {
	155	pr_warn("%s: timed out (tx busy)\n", synth->long_name);
	156	timeouts++;
	157	return 0;
	158	}
	159	udelay(1);
	160	}
	161	tmout = SPK_CTS_TIMEOUT;
	162	while (!((inb_p(speakup_info.port_tts + UART_MSR)) & UART_MSR_CTS)) {
	163	/* CTS */
	164	if (--tmout == 0) {
baf9ac9f WH	165	/* pr_warn("%s: timed out (cts)\n",
baf9ac9f WH	166	* synth->long_name); */
c6e3fd22 WH	167	timeouts++;
	168	return 0;
	169	}
	170	udelay(1);
	171	}
	172	timeouts = 0;
	173	return 1;
	174	}
	175
	176	unsigned char spk_serial_in(void)
	177	{
	178	int tmout = SPK_SERIAL_TIMEOUT;
	179
	180	while (!(inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR)) {
	181	if (--tmout == 0) {
	182	pr_warn("time out while waiting for input.\n");
	183	return 0xff;
	184	}
	185	udelay(1);
	186	}
	187	return inb_p(speakup_info.port_tts + UART_RX);
	188	}
	189	EXPORT_SYMBOL_GPL(spk_serial_in);
	190
	191	unsigned char spk_serial_in_nowait(void)
	192	{
	193	unsigned char lsr;
	194
	195	lsr = inb_p(speakup_info.port_tts + UART_LSR);
	196	if (!(lsr & UART_LSR_DR))
	197	return 0;
	198	return inb_p(speakup_info.port_tts + UART_RX);
	199	}
	200	EXPORT_SYMBOL_GPL(spk_serial_in_nowait);
	201
	202	int spk_serial_out(const char ch)
	203	{
ca2beaf8	204	if (synth->alive && spk_wait_for_xmitr()) {
c6e3fd22 WH	205	outb_p(ch, speakup_info.port_tts);
	206	return 1;
	207	}
	208	return 0;
	209	}
	210	EXPORT_SYMBOL_GPL(spk_serial_out);
	211
	212	void spk_serial_release(void)
	213	{
	214	if (speakup_info.port_tts == 0)
	215	return;
	216	synth_release_region(speakup_info.port_tts, 8);
	217	speakup_info.port_tts = 0;
	218	}
	219	EXPORT_SYMBOL_GPL(spk_serial_release);
	220