]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Serial device configuration | |
3 | # | |
1da177e4 | 4 | |
4f73bc4d JM |
5 | if TTY |
6 | ||
1da177e4 | 7 | menu "Serial drivers" |
0244ad00 | 8 | depends on HAS_IOMEM |
1da177e4 | 9 | |
9aac5887 RH |
10 | config SERIAL_EARLYCON |
11 | bool | |
12 | help | |
13 | Support for early consoles with the earlycon parameter. This enables | |
14 | the console before standard serial driver is probed. The console is | |
15 | enabled when early_param is processed. | |
16 | ||
9bef3d41 | 17 | source "drivers/tty/serial/8250/Kconfig" |
7d4008eb | 18 | |
ec9f47cd RK |
19 | comment "Non-8250 serial port support" |
20 | ||
1da177e4 LT |
21 | config SERIAL_AMBA_PL010 |
22 | tristate "ARM AMBA PL010 serial port support" | |
5dcb34bb | 23 | depends on ARM_AMBA |
1da177e4 LT |
24 | select SERIAL_CORE |
25 | help | |
26 | This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have | |
00584719 LB |
27 | an Integrator/AP or Integrator/PP2 platform, or if you have a |
28 | Cirrus Logic EP93xx CPU, say Y or M here. | |
1da177e4 LT |
29 | |
30 | If unsure, say N. | |
31 | ||
32 | config SERIAL_AMBA_PL010_CONSOLE | |
33 | bool "Support for console on AMBA serial port" | |
34 | depends on SERIAL_AMBA_PL010=y | |
35 | select SERIAL_CORE_CONSOLE | |
36 | ---help--- | |
37 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
38 | console (the system console is the device which receives all kernel | |
39 | messages and warnings and which allows logins in single user mode). | |
40 | ||
41 | Even if you say Y here, the currently visible framebuffer console | |
42 | (/dev/tty0) will still be used as the system console by default, but | |
43 | you can alter that using a kernel command line option such as | |
44 | "console=ttyAM0". (Try "man bootparam" or see the documentation of | |
45 | your boot loader (lilo or loadlin) about how to pass options to the | |
46 | kernel at boot time.) | |
47 | ||
48 | config SERIAL_AMBA_PL011 | |
49 | tristate "ARM AMBA PL011 serial port support" | |
8cd90e50 | 50 | depends on ARM_AMBA || SOC_ZX296702 |
1da177e4 LT |
51 | select SERIAL_CORE |
52 | help | |
53 | This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have | |
54 | an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M | |
8cd90e50 | 55 | here. Say Y or M if you have SOC_ZX296702. |
1da177e4 LT |
56 | |
57 | If unsure, say N. | |
58 | ||
59 | config SERIAL_AMBA_PL011_CONSOLE | |
60 | bool "Support for console on AMBA serial port" | |
61 | depends on SERIAL_AMBA_PL011=y | |
62 | select SERIAL_CORE_CONSOLE | |
0d3c673e | 63 | select SERIAL_EARLYCON |
1da177e4 LT |
64 | ---help--- |
65 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
66 | console (the system console is the device which receives all kernel | |
67 | messages and warnings and which allows logins in single user mode). | |
68 | ||
69 | Even if you say Y here, the currently visible framebuffer console | |
70 | (/dev/tty0) will still be used as the system console by default, but | |
71 | you can alter that using a kernel command line option such as | |
b22b4cdd | 72 | "console=ttyAMA0". (Try "man bootparam" or see the documentation of |
1da177e4 LT |
73 | your boot loader (lilo or loadlin) about how to pass options to the |
74 | kernel at boot time.) | |
75 | ||
d50d7269 RH |
76 | config SERIAL_EARLYCON_ARM_SEMIHOST |
77 | bool "Early console using ARM semihosting" | |
78 | depends on ARM64 || ARM | |
717e1cb2 AB |
79 | select SERIAL_CORE |
80 | select SERIAL_CORE_CONSOLE | |
d50d7269 RH |
81 | select SERIAL_EARLYCON |
82 | help | |
83 | Support for early debug console using ARM semihosting. This enables | |
84 | the console before standard serial driver is probed. This is enabled | |
85 | with "earlycon=smh" on the kernel command line. The console is | |
86 | enabled when early_param is processed. | |
87 | ||
b45d5279 MR |
88 | config SERIAL_SB1250_DUART |
89 | tristate "BCM1xxx on-chip DUART serial support" | |
90 | depends on SIBYTE_SB1xxx_SOC=y | |
91 | select SERIAL_CORE | |
92 | default y | |
93 | ---help--- | |
94 | Support for the asynchronous serial interface (DUART) included in | |
95 | the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that | |
96 | the letter D in DUART stands for "dual", which is how the device | |
97 | is implemented. Depending on the SOC configuration there may be | |
98 | one or more DUARTs available of which all are handled. | |
99 | ||
100 | If unsure, say Y. To compile this driver as a module, choose M here: | |
101 | the module will be called sb1250-duart. | |
102 | ||
103 | config SERIAL_SB1250_DUART_CONSOLE | |
104 | bool "Support for console on a BCM1xxx DUART serial port" | |
105 | depends on SERIAL_SB1250_DUART=y | |
106 | select SERIAL_CORE_CONSOLE | |
107 | default y | |
108 | ---help--- | |
109 | If you say Y here, it will be possible to use a serial port as the | |
110 | system console (the system console is the device which receives all | |
111 | kernel messages and warnings and which allows logins in single user | |
112 | mode). | |
113 | ||
114 | If unsure, say Y. | |
115 | ||
749c4e60 HS |
116 | config SERIAL_ATMEL |
117 | bool "AT91 / AT32 on-chip serial port support" | |
18e0749a | 118 | depends on ARCH_AT91 || AVR32 |
1e6c9c28 | 119 | select SERIAL_CORE |
e0b0baad | 120 | select SERIAL_MCTRL_GPIO |
1e6c9c28 | 121 | help |
afefc415 | 122 | This enables the driver for the on-chip UARTs of the Atmel |
acca9b83 | 123 | AT91 and AT32 processors. |
1e6c9c28 | 124 | |
749c4e60 HS |
125 | config SERIAL_ATMEL_CONSOLE |
126 | bool "Support for console on AT91 / AT32 serial port" | |
127 | depends on SERIAL_ATMEL=y | |
1e6c9c28 AV |
128 | select SERIAL_CORE_CONSOLE |
129 | help | |
acca9b83 HS |
130 | Say Y here if you wish to use an on-chip UART on a Atmel |
131 | AT91 or AT32 processor as the system console (the system | |
132 | console is the device which receives all kernel messages and | |
133 | warnings and which allows logins in single user mode). | |
1e6c9c28 | 134 | |
a6670615 CC |
135 | config SERIAL_ATMEL_PDC |
136 | bool "Support DMA transfers on AT91 / AT32 serial port" | |
137 | depends on SERIAL_ATMEL | |
138 | default y | |
139 | help | |
140 | Say Y here if you wish to use the PDC to do DMA transfers to | |
141 | and from the Atmel AT91 / AT32 serial port. In order to | |
142 | actually use DMA transfers, make sure that the use_dma_tx | |
143 | and use_dma_rx members in the atmel_uart_data struct is set | |
144 | appropriately for each port. | |
145 | ||
146 | Note that break and error handling currently doesn't work | |
147 | properly when DMA is enabled. Make sure that ports where | |
148 | this matters don't use DMA. | |
149 | ||
749c4e60 | 150 | config SERIAL_ATMEL_TTYAT |
acca9b83 | 151 | bool "Install as device ttyATn instead of ttySn" |
749c4e60 | 152 | depends on SERIAL_ATMEL=y |
1e6c9c28 | 153 | help |
acca9b83 HS |
154 | Say Y here if you wish to have the internal AT91 / AT32 UARTs |
155 | appear as /dev/ttyATn (major 204, minor starting at 154) | |
156 | instead of the normal /dev/ttySn (major 4, minor starting at | |
157 | 64). This is necessary if you also want other UARTs, such as | |
158 | external 8250/16C550 compatible UARTs. | |
1e6c9c28 AV |
159 | The ttySn nodes are legally reserved for the 8250 serial driver |
160 | but are often misused by other serial drivers. | |
161 | ||
162 | To use this, you should create suitable ttyATn device nodes in | |
163 | /dev/, and pass "console=ttyATn" to the kernel. | |
164 | ||
165 | Say Y if you have an external 8250/16C550 UART. If unsure, say N. | |
166 | ||
0c57dfcc AV |
167 | config SERIAL_KGDB_NMI |
168 | bool "Serial console over KGDB NMI debugger port" | |
169 | depends on KGDB_SERIAL_CONSOLE | |
170 | help | |
171 | This special driver allows you to temporary use NMI debugger port | |
172 | as a normal console (assuming that the port is attached to KGDB). | |
173 | ||
174 | Unlike KDB's disable_nmi command, with this driver you are always | |
175 | able to go back to the debugger using KGDB escape sequence ($3#33). | |
176 | This is because this console driver processes the input in NMI | |
177 | context, and thus is able to intercept the magic sequence. | |
178 | ||
179 | Note that since the console interprets input and uses polling | |
180 | communication methods, for things like PPP you still must fully | |
181 | detach debugger port from the KGDB NMI (i.e. disable_nmi), and | |
182 | use raw console. | |
183 | ||
184 | If unsure, say N. | |
185 | ||
2c7ee6ab AV |
186 | config SERIAL_KS8695 |
187 | bool "Micrel KS8695 (Centaur) serial port support" | |
188 | depends on ARCH_KS8695 | |
189 | select SERIAL_CORE | |
190 | help | |
191 | This selects the Micrel Centaur KS8695 UART. Say Y here. | |
192 | ||
193 | config SERIAL_KS8695_CONSOLE | |
194 | bool "Support for console on KS8695 (Centaur) serial port" | |
195 | depends on SERIAL_KS8695=y | |
196 | select SERIAL_CORE_CONSOLE | |
197 | help | |
198 | Say Y here if you wish to use a KS8695 (Centaur) UART as the | |
199 | system console (the system console is the device which | |
200 | receives all kernel messages and warnings and which allows | |
201 | logins in single user mode). | |
202 | ||
ff7693d0 CC |
203 | config SERIAL_MESON |
204 | tristate "Meson serial port support" | |
205 | depends on ARCH_MESON | |
206 | select SERIAL_CORE | |
207 | help | |
208 | This enables the driver for the on-chip UARTs of the Amlogic | |
209 | MesonX processors. | |
210 | ||
211 | config SERIAL_MESON_CONSOLE | |
212 | bool "Support for console on meson" | |
213 | depends on SERIAL_MESON=y | |
214 | select SERIAL_CORE_CONSOLE | |
215 | help | |
216 | Say Y here if you wish to use a Amlogic MesonX UART as the | |
217 | system console (the system console is the device which | |
218 | receives all kernel messages and warnings and which allows | |
219 | logins in single user mode) as /dev/ttyAMLx. | |
220 | ||
1da177e4 LT |
221 | config SERIAL_CLPS711X |
222 | tristate "CLPS711X serial port support" | |
093a9e2a | 223 | depends on ARCH_CLPS711X || COMPILE_TEST |
1da177e4 | 224 | select SERIAL_CORE |
efb08951 | 225 | select SERIAL_MCTRL_GPIO if GPIOLIB |
1da177e4 | 226 | help |
b53cc0fa AS |
227 | This enables the driver for the on-chip UARTs of the Cirrus |
228 | Logic EP711x/EP721x/EP731x processors. | |
1da177e4 LT |
229 | |
230 | config SERIAL_CLPS711X_CONSOLE | |
231 | bool "Support for console on CLPS711X serial port" | |
232 | depends on SERIAL_CLPS711X=y | |
233 | select SERIAL_CORE_CONSOLE | |
234 | help | |
235 | Even if you say Y here, the currently visible virtual console | |
236 | (/dev/tty0) will still be used as the system console by default, but | |
237 | you can alter that using a kernel command line option such as | |
b53cc0fa | 238 | "console=ttyCL1". |
1da177e4 | 239 | |
b497549a BD |
240 | config SERIAL_SAMSUNG |
241 | tristate "Samsung SoC serial support" | |
95562e7f | 242 | depends on PLAT_SAMSUNG || ARCH_EXYNOS |
19c1d6a3 | 243 | select SERIAL_CORE |
1da177e4 | 244 | help |
73e55cb3 | 245 | Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, |
1da177e4 LT |
246 | providing /dev/ttySAC0, 1 and 2 (note, some machines may not |
247 | provide all of these ports, depending on how the serial port | |
248 | pins are configured. | |
249 | ||
3bd9377e BD |
250 | config SERIAL_SAMSUNG_UARTS_4 |
251 | bool | |
edeeec85 | 252 | depends on SERIAL_SAMSUNG |
c51d41a1 | 253 | default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) |
3bd9377e BD |
254 | help |
255 | Internal node for the common case of 4 Samsung compatible UARTs | |
256 | ||
03d5e77b BD |
257 | config SERIAL_SAMSUNG_UARTS |
258 | int | |
edeeec85 | 259 | depends on SERIAL_SAMSUNG |
da121506 | 260 | default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 |
03d5e77b BD |
261 | default 3 |
262 | help | |
263 | Select the number of available UART ports for the Samsung S3C | |
264 | serial driver | |
265 | ||
b497549a BD |
266 | config SERIAL_SAMSUNG_DEBUG |
267 | bool "Samsung SoC serial debug" | |
5fed4a37 | 268 | depends on SERIAL_SAMSUNG && DEBUG_LL |
b497549a BD |
269 | help |
270 | Add support for debugging the serial driver. Since this is | |
271 | generally being used as a console, we use our own output | |
272 | routines that go via the low-level debug printascii() | |
273 | function. | |
274 | ||
275 | config SERIAL_SAMSUNG_CONSOLE | |
276 | bool "Support for console on Samsung SoC serial port" | |
277 | depends on SERIAL_SAMSUNG=y | |
1da177e4 | 278 | select SERIAL_CORE_CONSOLE |
357d5615 | 279 | select SERIAL_EARLYCON |
1da177e4 | 280 | help |
73e55cb3 | 281 | Allow selection of the S3C24XX on-board serial ports for use as |
1da177e4 LT |
282 | an virtual console. |
283 | ||
284 | Even if you say Y here, the currently visible virtual console | |
285 | (/dev/tty0) will still be used as the system console by default, but | |
286 | you can alter that using a kernel command line option such as | |
287 | "console=ttySACx". (Try "man bootparam" or see the documentation of | |
288 | your boot loader about how to pass options to the kernel at | |
289 | boot time.) | |
290 | ||
161e773c RW |
291 | config SERIAL_SIRFSOC |
292 | tristate "SiRF SoC Platform Serial port support" | |
c5dece37 | 293 | depends on ARCH_SIRF |
161e773c RW |
294 | select SERIAL_CORE |
295 | help | |
296 | Support for the on-chip UART on the CSR SiRFprimaII series, | |
297 | providing /dev/ttySiRF0, 1 and 2 (note, some machines may not | |
298 | provide all of these ports, depending on how the serial port | |
299 | pins are configured). | |
300 | ||
301 | config SERIAL_SIRFSOC_CONSOLE | |
302 | bool "Support for console on SiRF SoC serial port" | |
303 | depends on SERIAL_SIRFSOC=y | |
304 | select SERIAL_CORE_CONSOLE | |
305 | help | |
306 | Even if you say Y here, the currently visible virtual console | |
307 | (/dev/tty0) will still be used as the system console by default, but | |
308 | you can alter that using a kernel command line option such as | |
309 | "console=ttySiRFx". (Try "man bootparam" or see the documentation of | |
310 | your boot loader about how to pass options to the kernel at | |
311 | boot time.) | |
61fd1526 | 312 | |
e9ea096d LD |
313 | config SERIAL_TEGRA |
314 | tristate "NVIDIA Tegra20/30 SoC serial controller" | |
315 | depends on ARCH_TEGRA && TEGRA20_APB_DMA | |
316 | select SERIAL_CORE | |
317 | help | |
318 | Support for the on-chip UARTs on the NVIDIA Tegra series SOCs | |
3bf5d350 | 319 | providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not |
e9ea096d LD |
320 | provide all of these ports, depending on how the serial port |
321 | are enabled). This driver uses the APB DMA to achieve higher baudrate | |
322 | and better performance. | |
323 | ||
61fd1526 AC |
324 | config SERIAL_MAX3100 |
325 | tristate "MAX3100 support" | |
326 | depends on SPI | |
327 | select SERIAL_CORE | |
328 | help | |
329 | MAX3100 chip support | |
330 | ||
f6544418 | 331 | config SERIAL_MAX310X |
d0fd413c | 332 | tristate "MAX310X support" |
10d8b34a | 333 | depends on SPI_MASTER |
44318feb | 334 | select SERIAL_CORE |
10d8b34a | 335 | select REGMAP_SPI if SPI_MASTER |
f6544418 | 336 | default n |
44318feb | 337 | help |
f6544418 | 338 | This selects support for an advanced UART from Maxim (Dallas). |
003236d9 | 339 | Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830. |
f6544418 AS |
340 | Each IC contains 128 words each of receive and transmit FIFO |
341 | that can be controlled through I2C or high-speed SPI. | |
342 | ||
343 | Say Y here if you want to support this ICs. | |
44318feb | 344 | |
1da177e4 LT |
345 | config SERIAL_DZ |
346 | bool "DECstation DZ serial driver" | |
875d43e7 | 347 | depends on MACH_DECSTATION && 32BIT |
1da177e4 | 348 | select SERIAL_CORE |
7287d765 MR |
349 | default y |
350 | ---help--- | |
351 | DZ11-family serial controllers for DECstations and VAXstations, | |
352 | including the DC7085, M7814, and M7819. | |
1da177e4 LT |
353 | |
354 | config SERIAL_DZ_CONSOLE | |
355 | bool "Support console on DECstation DZ serial driver" | |
356 | depends on SERIAL_DZ=y | |
357 | select SERIAL_CORE_CONSOLE | |
7287d765 MR |
358 | default y |
359 | ---help--- | |
1da177e4 LT |
360 | If you say Y here, it will be possible to use a serial port as the |
361 | system console (the system console is the device which receives all | |
362 | kernel messages and warnings and which allows logins in single user | |
7287d765 MR |
363 | mode). |
364 | ||
365 | Note that the firmware uses ttyS3 as the serial console on | |
366 | DECstations that use this driver. | |
1da177e4 LT |
367 | |
368 | If unsure, say Y. | |
369 | ||
8b4a4080 MR |
370 | config SERIAL_ZS |
371 | tristate "DECstation Z85C30 serial support" | |
372 | depends on MACH_DECSTATION | |
373 | select SERIAL_CORE | |
374 | default y | |
375 | ---help--- | |
376 | Support for the Zilog 85C350 serial communications controller used | |
377 | for serial ports in newer DECstation systems. These include the | |
378 | DECsystem 5900 and all models of the DECstation and DECsystem 5000 | |
379 | systems except from model 200. | |
380 | ||
381 | If unsure, say Y. To compile this driver as a module, choose M here: | |
382 | the module will be called zs. | |
383 | ||
384 | config SERIAL_ZS_CONSOLE | |
385 | bool "Support for console on a DECstation Z85C30 serial port" | |
386 | depends on SERIAL_ZS=y | |
387 | select SERIAL_CORE_CONSOLE | |
388 | default y | |
389 | ---help--- | |
390 | If you say Y here, it will be possible to use a serial port as the | |
391 | system console (the system console is the device which receives all | |
392 | kernel messages and warnings and which allows logins in single user | |
393 | mode). | |
394 | ||
395 | Note that the firmware uses ttyS1 as the serial console on the | |
396 | Maxine and ttyS3 on the others using this driver. | |
397 | ||
398 | If unsure, say Y. | |
399 | ||
1da177e4 LT |
400 | config SERIAL_21285 |
401 | tristate "DC21285 serial port support" | |
18e0749a | 402 | depends on FOOTBRIDGE |
1da177e4 LT |
403 | select SERIAL_CORE |
404 | help | |
405 | If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ | |
406 | PCI bridge you can enable its onboard serial port by enabling this | |
407 | option. | |
408 | ||
409 | config SERIAL_21285_CONSOLE | |
410 | bool "Console on DC21285 serial port" | |
411 | depends on SERIAL_21285=y | |
412 | select SERIAL_CORE_CONSOLE | |
413 | help | |
414 | If you have enabled the serial port on the 21285 footbridge you can | |
415 | make it the console by answering Y to this option. | |
416 | ||
417 | Even if you say Y here, the currently visible virtual console | |
418 | (/dev/tty0) will still be used as the system console by default, but | |
419 | you can alter that using a kernel command line option such as | |
420 | "console=ttyFB". (Try "man bootparam" or see the documentation of | |
421 | your boot loader (lilo or loadlin) about how to pass options to the | |
422 | kernel at boot time.) | |
423 | ||
1da177e4 LT |
424 | config SERIAL_MPSC |
425 | bool "Marvell MPSC serial port support" | |
18e0749a | 426 | depends on MV64X60 |
1da177e4 LT |
427 | select SERIAL_CORE |
428 | help | |
429 | Say Y here if you want to use the Marvell MPSC serial controller. | |
430 | ||
431 | config SERIAL_MPSC_CONSOLE | |
432 | bool "Support for console on Marvell MPSC serial port" | |
433 | depends on SERIAL_MPSC | |
434 | select SERIAL_CORE_CONSOLE | |
435 | help | |
436 | Say Y here if you want to support a serial console on a Marvell MPSC. | |
437 | ||
438 | config SERIAL_PXA | |
439 | bool "PXA serial port support" | |
56422554 | 440 | depends on ARCH_PXA || ARCH_MMP |
1da177e4 LT |
441 | select SERIAL_CORE |
442 | help | |
443 | If you have a machine based on an Intel XScale PXA2xx CPU you | |
444 | can enable its onboard serial ports by enabling this option. | |
445 | ||
446 | config SERIAL_PXA_CONSOLE | |
447 | bool "Console on PXA serial port" | |
448 | depends on SERIAL_PXA | |
449 | select SERIAL_CORE_CONSOLE | |
450 | help | |
451 | If you have enabled the serial port on the Intel XScale PXA | |
452 | CPU you can make it the console by answering Y to this option. | |
453 | ||
454 | Even if you say Y here, the currently visible virtual console | |
455 | (/dev/tty0) will still be used as the system console by default, but | |
456 | you can alter that using a kernel command line option such as | |
457 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
458 | your boot loader (lilo or loadlin) about how to pass options to the | |
459 | kernel at boot time.) | |
460 | ||
461 | config SERIAL_SA1100 | |
462 | bool "SA1100 serial port support" | |
18e0749a | 463 | depends on ARCH_SA1100 |
1da177e4 LT |
464 | select SERIAL_CORE |
465 | help | |
466 | If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you | |
467 | can enable its onboard serial port by enabling this option. | |
468 | Please read <file:Documentation/arm/SA1100/serial_UART> for further | |
469 | info. | |
470 | ||
471 | config SERIAL_SA1100_CONSOLE | |
472 | bool "Console on SA1100 serial port" | |
473 | depends on SERIAL_SA1100 | |
474 | select SERIAL_CORE_CONSOLE | |
475 | help | |
476 | If you have enabled the serial port on the SA1100/SA1110 StrongARM | |
477 | CPU you can make it the console by answering Y to this option. | |
478 | ||
479 | Even if you say Y here, the currently visible virtual console | |
480 | (/dev/tty0) will still be used as the system console by default, but | |
481 | you can alter that using a kernel command line option such as | |
482 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
483 | your boot loader (lilo or loadlin) about how to pass options to the | |
484 | kernel at boot time.) | |
485 | ||
194de561 BW |
486 | config SERIAL_BFIN |
487 | tristate "Blackfin serial port support" | |
529a73fb | 488 | depends on BLACKFIN |
194de561 BW |
489 | select SERIAL_CORE |
490 | select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) | |
491 | help | |
492 | Add support for the built-in UARTs on the Blackfin. | |
493 | ||
494 | To compile this driver as a module, choose M here: the | |
0c6967b5 | 495 | module is named bfin_uart.ko. |
194de561 BW |
496 | |
497 | config SERIAL_BFIN_CONSOLE | |
498 | bool "Console on Blackfin serial port" | |
7111de76 | 499 | depends on SERIAL_BFIN=y |
194de561 BW |
500 | select SERIAL_CORE_CONSOLE |
501 | ||
502 | choice | |
503 | prompt "UART Mode" | |
504 | depends on SERIAL_BFIN | |
505 | default SERIAL_BFIN_DMA | |
506 | help | |
507 | This driver supports the built-in serial ports of the Blackfin family | |
508 | of CPUs | |
509 | ||
510 | config SERIAL_BFIN_DMA | |
511 | bool "DMA mode" | |
51a2301e | 512 | depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n |
194de561 BW |
513 | help |
514 | This driver works under DMA mode. If this option is selected, the | |
515 | blackfin simple dma driver is also enabled. | |
516 | ||
517 | config SERIAL_BFIN_PIO | |
518 | bool "PIO mode" | |
519 | help | |
520 | This driver works under PIO mode. | |
521 | ||
522 | endchoice | |
523 | ||
524 | config SERIAL_BFIN_UART0 | |
525 | bool "Enable UART0" | |
526 | depends on SERIAL_BFIN | |
527 | help | |
528 | Enable UART0 | |
529 | ||
530 | config BFIN_UART0_CTSRTS | |
531 | bool "Enable UART0 hardware flow control" | |
532 | depends on SERIAL_BFIN_UART0 | |
533 | help | |
57afb399 | 534 | Enable hardware flow control in the driver. |
194de561 BW |
535 | |
536 | config SERIAL_BFIN_UART1 | |
537 | bool "Enable UART1" | |
09545568 | 538 | depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) |
194de561 BW |
539 | help |
540 | Enable UART1 | |
541 | ||
542 | config BFIN_UART1_CTSRTS | |
543 | bool "Enable UART1 hardware flow control" | |
544 | depends on SERIAL_BFIN_UART1 | |
545 | help | |
57afb399 | 546 | Enable hardware flow control in the driver. |
194de561 | 547 | |
f4d640c9 RH |
548 | config SERIAL_BFIN_UART2 |
549 | bool "Enable UART2" | |
f933d3c7 | 550 | depends on SERIAL_BFIN && (BF54x || BF538 || BF539) |
f4d640c9 RH |
551 | help |
552 | Enable UART2 | |
553 | ||
554 | config BFIN_UART2_CTSRTS | |
555 | bool "Enable UART2 hardware flow control" | |
556 | depends on SERIAL_BFIN_UART2 | |
557 | help | |
57afb399 | 558 | Enable hardware flow control in the driver. |
f4d640c9 RH |
559 | |
560 | config SERIAL_BFIN_UART3 | |
561 | bool "Enable UART3" | |
562 | depends on SERIAL_BFIN && (BF54x) | |
563 | help | |
564 | Enable UART3 | |
565 | ||
566 | config BFIN_UART3_CTSRTS | |
567 | bool "Enable UART3 hardware flow control" | |
568 | depends on SERIAL_BFIN_UART3 | |
569 | help | |
57afb399 | 570 | Enable hardware flow control in the driver. |
d307d36a | 571 | |
1da177e4 | 572 | config SERIAL_IMX |
37fb5b56 | 573 | tristate "IMX serial port support" |
521b8ce6 | 574 | depends on ARCH_MXC |
1da177e4 | 575 | select SERIAL_CORE |
534fca06 | 576 | select RATIONAL |
1da177e4 LT |
577 | help |
578 | If you have a machine based on a Motorola IMX CPU you | |
579 | can enable its onboard serial port by enabling this option. | |
580 | ||
581 | config SERIAL_IMX_CONSOLE | |
582 | bool "Console on IMX serial port" | |
37fb5b56 | 583 | depends on SERIAL_IMX=y |
1da177e4 LT |
584 | select SERIAL_CORE_CONSOLE |
585 | help | |
f0f6b803 | 586 | If you have enabled the serial port on the Freescale IMX |
1da177e4 LT |
587 | CPU you can make it the console by answering Y to this option. |
588 | ||
589 | Even if you say Y here, the currently visible virtual console | |
590 | (/dev/tty0) will still be used as the system console by default, but | |
591 | you can alter that using a kernel command line option such as | |
f0f6b803 FE |
592 | "console=ttymxc0". (Try "man bootparam" or see the documentation of |
593 | your bootloader about how to pass options to the kernel at boot time.) | |
1da177e4 | 594 | |
238b8721 PK |
595 | config SERIAL_UARTLITE |
596 | tristate "Xilinx uartlite serial port support" | |
1eacbfb0 | 597 | depends on HAS_IOMEM |
238b8721 PK |
598 | select SERIAL_CORE |
599 | help | |
600 | Say Y here if you want to use the Xilinx uartlite serial controller. | |
601 | ||
602 | To compile this driver as a module, choose M here: the | |
4737f097 | 603 | module will be called uartlite. |
238b8721 PK |
604 | |
605 | config SERIAL_UARTLITE_CONSOLE | |
606 | bool "Support for console on Xilinx uartlite serial port" | |
607 | depends on SERIAL_UARTLITE=y | |
608 | select SERIAL_CORE_CONSOLE | |
609 | help | |
610 | Say Y here if you wish to use a Xilinx uartlite as the system | |
611 | console (the system console is the device which receives all kernel | |
612 | messages and warnings and which allows logins in single user mode). | |
613 | ||
1da177e4 LT |
614 | config SERIAL_SUNCORE |
615 | bool | |
0b57ee9e | 616 | depends on SPARC |
1da177e4 LT |
617 | select SERIAL_CORE |
618 | select SERIAL_CORE_CONSOLE | |
619 | default y | |
620 | ||
621 | config SERIAL_SUNZILOG | |
622 | tristate "Sun Zilog8530 serial support" | |
0b57ee9e | 623 | depends on SPARC |
1da177e4 LT |
624 | help |
625 | This driver supports the Zilog8530 serial ports found on many Sparc | |
626 | systems. Say Y or M if you want to be able to these serial ports. | |
627 | ||
628 | config SERIAL_SUNZILOG_CONSOLE | |
629 | bool "Console on Sun Zilog8530 serial port" | |
630 | depends on SERIAL_SUNZILOG=y | |
631 | help | |
632 | If you would like to be able to use the Zilog8530 serial port | |
633 | on your Sparc system as the console, you can do so by answering | |
634 | Y to this option. | |
635 | ||
636 | config SERIAL_SUNSU | |
637 | tristate "Sun SU serial support" | |
0b57ee9e | 638 | depends on SPARC && PCI |
1da177e4 LT |
639 | help |
640 | This driver supports the 8250 serial ports that run the keyboard and | |
641 | mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able | |
642 | to these serial ports. | |
643 | ||
644 | config SERIAL_SUNSU_CONSOLE | |
645 | bool "Console on Sun SU serial port" | |
646 | depends on SERIAL_SUNSU=y | |
647 | help | |
648 | If you would like to be able to use the SU serial port | |
649 | on your Sparc system as the console, you can do so by answering | |
650 | Y to this option. | |
651 | ||
652 | config SERIAL_MUX | |
653 | tristate "Serial MUX support" | |
305f5167 | 654 | depends on GSC |
1da177e4 LT |
655 | select SERIAL_CORE |
656 | default y | |
657 | ---help--- | |
658 | Saying Y here will enable the hardware MUX serial driver for | |
e45da35e CD |
659 | the Nova, K class systems and D class with a 'remote control card'. |
660 | The hardware MUX is not 8250/16550 compatible therefore the | |
661 | /dev/ttyB0 device is shared between the Serial MUX and the PDC | |
662 | software console. The following steps need to be completed to use | |
663 | the Serial MUX: | |
1da177e4 LT |
664 | |
665 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
666 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
667 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
668 | root on this console.) | |
669 | 4. Change the kernel command console parameter to: console=ttyB0 | |
670 | ||
671 | config SERIAL_MUX_CONSOLE | |
7111de76 AB |
672 | bool "Support for console on serial MUX" |
673 | depends on SERIAL_MUX=y | |
1da177e4 | 674 | select SERIAL_CORE_CONSOLE |
7111de76 | 675 | default y |
1da177e4 LT |
676 | |
677 | config PDC_CONSOLE | |
678 | bool "PDC software console support" | |
679 | depends on PARISC && !SERIAL_MUX && VT | |
680 | default n | |
681 | help | |
682 | Saying Y here will enable the software based PDC console to be | |
683 | used as the system console. This is useful for machines in | |
684 | which the hardware based console has not been written yet. The | |
6774def6 | 685 | following steps must be completed to use the PDC console: |
1da177e4 LT |
686 | |
687 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
688 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
689 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
690 | root on this console.) | |
691 | 4. Change the kernel command console parameter to: console=ttyB0 | |
692 | ||
693 | config SERIAL_SUNSAB | |
694 | tristate "Sun Siemens SAB82532 serial support" | |
0b57ee9e | 695 | depends on SPARC && PCI |
1da177e4 LT |
696 | help |
697 | This driver supports the Siemens SAB82532 DUSCC serial ports on newer | |
698 | (PCI) UltraSPARC systems. Say Y or M if you want to be able to these | |
699 | serial ports. | |
700 | ||
701 | config SERIAL_SUNSAB_CONSOLE | |
702 | bool "Console on Sun Siemens SAB82532 serial port" | |
703 | depends on SERIAL_SUNSAB=y | |
704 | help | |
705 | If you would like to be able to use the SAB82532 serial port | |
706 | on your Sparc system as the console, you can do so by answering | |
707 | Y to this option. | |
708 | ||
02fd473b DM |
709 | config SERIAL_SUNHV |
710 | bool "Sun4v Hypervisor Console support" | |
711 | depends on SPARC64 | |
712 | help | |
713 | This driver supports the console device found on SUN4V Sparc | |
714 | systems. Say Y if you want to be able to use this device. | |
715 | ||
1da177e4 | 716 | config SERIAL_IP22_ZILOG |
5057c98a TB |
717 | tristate "SGI Zilog8530 serial support" |
718 | depends on SGI_HAS_ZILOG | |
1da177e4 LT |
719 | select SERIAL_CORE |
720 | help | |
5057c98a | 721 | This driver supports the Zilog8530 serial ports found on SGI |
1da177e4 LT |
722 | systems. Say Y or M if you want to be able to these serial ports. |
723 | ||
724 | config SERIAL_IP22_ZILOG_CONSOLE | |
5057c98a | 725 | bool "Console on SGI Zilog8530 serial port" |
1da177e4 LT |
726 | depends on SERIAL_IP22_ZILOG=y |
727 | select SERIAL_CORE_CONSOLE | |
728 | ||
1da177e4 | 729 | config SERIAL_SH_SCI |
ecd95616 | 730 | tristate "SuperH SCI(F) serial port support" |
e1d0be61 | 731 | depends on SUPERH || ARCH_SHMOBILE || H8300 || COMPILE_TEST |
1da177e4 LT |
732 | select SERIAL_CORE |
733 | ||
ecd95616 PM |
734 | config SERIAL_SH_SCI_NR_UARTS |
735 | int "Maximum number of SCI(F) serial ports" | |
736 | depends on SERIAL_SH_SCI | |
737 | default "2" | |
738 | ||
1da177e4 | 739 | config SERIAL_SH_SCI_CONSOLE |
ecd95616 | 740 | bool "Support for console on SuperH SCI(F)" |
1da177e4 LT |
741 | depends on SERIAL_SH_SCI=y |
742 | select SERIAL_CORE_CONSOLE | |
743 | ||
73a19e4c GL |
744 | config SERIAL_SH_SCI_DMA |
745 | bool "DMA support" | |
8b77562b | 746 | depends on SERIAL_SH_SCI && SH_DMAE |
73a19e4c | 747 | |
de8211b9 VW |
748 | config SERIAL_PNX8XXX |
749 | bool "Enable PNX8XXX SoCs' UART Support" | |
e33b0451 | 750 | depends on SOC_PNX833X |
de8211b9 VW |
751 | select SERIAL_CORE |
752 | help | |
e33b0451 RB |
753 | If you have a MIPS-based Philips SoC such as PNX8330 and you want |
754 | to use serial ports, say Y. Otherwise, say N. | |
de8211b9 VW |
755 | |
756 | config SERIAL_PNX8XXX_CONSOLE | |
757 | bool "Enable PNX8XX0 serial console" | |
758 | depends on SERIAL_PNX8XXX | |
759 | select SERIAL_CORE_CONSOLE | |
760 | help | |
e33b0451 RB |
761 | If you have a MIPS-based Philips SoC such as PNX8330 and you want |
762 | to use serial console, say Y. Otherwise, say N. | |
de8211b9 | 763 | |
596f93f5 RS |
764 | config SERIAL_HS_LPC32XX |
765 | tristate "LPC32XX high speed serial port support" | |
766 | depends on ARCH_LPC32XX && OF | |
767 | select SERIAL_CORE | |
768 | help | |
769 | Support for the LPC32XX high speed serial ports (up to 900kbps). | |
770 | Those are UARTs completely different from the Standard UARTs on the | |
771 | LPC32XX SoC. | |
772 | Choose M or Y here to build this driver. | |
773 | ||
774 | config SERIAL_HS_LPC32XX_CONSOLE | |
775 | bool "Enable LPC32XX high speed UART serial console" | |
080029b1 | 776 | depends on SERIAL_HS_LPC32XX=y |
596f93f5 RS |
777 | select SERIAL_CORE_CONSOLE |
778 | help | |
779 | If you would like to be able to use one of the high speed serial | |
780 | ports on the LPC32XX as the console, you can do so by answering | |
781 | Y to this option. | |
782 | ||
1da177e4 LT |
783 | config SERIAL_CORE |
784 | tristate | |
785 | ||
786 | config SERIAL_CORE_CONSOLE | |
787 | bool | |
788 | ||
f2d937f3 JW |
789 | config CONSOLE_POLL |
790 | bool | |
791 | ||
1da177e4 LT |
792 | config SERIAL_68328 |
793 | bool "68328 serial support" | |
794 | depends on M68328 || M68EZ328 || M68VZ328 | |
795 | help | |
796 | This driver supports the built-in serial port of the Motorola 68328 | |
09509603 | 797 | (standard, EZ and VZ varieties). |
1da177e4 LT |
798 | |
799 | config SERIAL_68328_RTS_CTS | |
800 | bool "Support RTS/CTS on 68328 serial port" | |
801 | depends on SERIAL_68328 | |
802 | ||
ae1b5f0d | 803 | config SERIAL_MCF |
02f11f39 | 804 | bool "Coldfire serial support" |
ae1b5f0d GU |
805 | depends on COLDFIRE |
806 | select SERIAL_CORE | |
807 | help | |
02f11f39 | 808 | This serial driver supports the Freescale Coldfire serial ports. |
ae1b5f0d GU |
809 | |
810 | config SERIAL_MCF_BAUDRATE | |
811 | int "Default baudrate for Coldfire serial ports" | |
812 | depends on SERIAL_MCF | |
813 | default 19200 | |
814 | help | |
815 | This setting lets you define what the default baudrate is for the | |
816 | ColdFire serial ports. The usual default varies from board to board, | |
817 | and this setting is a way of catering for that. | |
818 | ||
819 | config SERIAL_MCF_CONSOLE | |
820 | bool "Coldfire serial console support" | |
821 | depends on SERIAL_MCF | |
822 | select SERIAL_CORE_CONSOLE | |
823 | help | |
824 | Enable a ColdFire internal serial port to be the system console. | |
825 | ||
1da177e4 | 826 | config SERIAL_PMACZILOG |
ec9cbe09 | 827 | tristate "Mac or PowerMac z85c30 ESCC support" |
213dce3c | 828 | depends on (M68K && MAC) || PPC_PMAC |
1da177e4 LT |
829 | select SERIAL_CORE |
830 | help | |
831 | This driver supports the Zilog z85C30 serial ports found on | |
ec9cbe09 | 832 | (Power)Mac machines. |
1da177e4 LT |
833 | Say Y or M if you want to be able to these serial ports. |
834 | ||
e4533b24 DW |
835 | config SERIAL_PMACZILOG_TTYS |
836 | bool "Use ttySn device nodes for Zilog z85c30" | |
837 | depends on SERIAL_PMACZILOG | |
838 | help | |
839 | The pmac_zilog driver for the z85C30 chip on many powermacs | |
840 | historically used the device numbers for /dev/ttySn. The | |
841 | 8250 serial port driver also uses these numbers, which means | |
842 | the two drivers being unable to coexist; you could not use | |
843 | both z85C30 and 8250 type ports at the same time. | |
844 | ||
845 | If this option is not selected, the pmac_zilog driver will | |
846 | use the device numbers allocated for /dev/ttyPZn. This allows | |
847 | the pmac_zilog and 8250 drivers to co-exist, but may cause | |
848 | existing userspace setups to break. Programs that need to | |
849 | access the built-in serial ports on powermacs will need to | |
850 | be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. | |
851 | ||
852 | If you enable this option, any z85c30 ports in the system will | |
853 | be registered as ttyS0 onwards as in the past, and you will be | |
854 | unable to use the 8250 module for PCMCIA or other 16C550-style | |
855 | UARTs. | |
856 | ||
ec9cbe09 | 857 | Say N unless you need the z85c30 ports on your (Power)Mac |
e4533b24 DW |
858 | to appear as /dev/ttySn. |
859 | ||
1da177e4 | 860 | config SERIAL_PMACZILOG_CONSOLE |
ec9cbe09 | 861 | bool "Console on Mac or PowerMac z85c30 serial port" |
1da177e4 LT |
862 | depends on SERIAL_PMACZILOG=y |
863 | select SERIAL_CORE_CONSOLE | |
864 | help | |
865 | If you would like to be able to use the z85c30 serial port | |
ec9cbe09 | 866 | on your (Power)Mac as the console, you can do so by answering |
1da177e4 LT |
867 | Y to this option. |
868 | ||
1da177e4 LT |
869 | config SERIAL_CPM |
870 | tristate "CPM SCC/SMC serial port support" | |
49708c9e | 871 | depends on CPM2 || CPM1 |
1da177e4 LT |
872 | select SERIAL_CORE |
873 | help | |
874 | This driver supports the SCC and SMC serial ports on Motorola | |
875 | embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) | |
876 | ||
877 | config SERIAL_CPM_CONSOLE | |
878 | bool "Support for console on CPM SCC/SMC serial port" | |
879 | depends on SERIAL_CPM=y | |
880 | select SERIAL_CORE_CONSOLE | |
881 | help | |
882 | Say Y here if you wish to use a SCC or SMC CPM UART as the system | |
883 | console (the system console is the device which receives all kernel | |
884 | messages and warnings and which allows logins in single user mode). | |
885 | ||
886 | Even if you say Y here, the currently visible framebuffer console | |
887 | (/dev/tty0) will still be used as the system console by default, but | |
888 | you can alter that using a kernel command line option such as | |
889 | "console=ttyCPM0". (Try "man bootparam" or see the documentation of | |
890 | your boot loader (lilo or loadlin) about how to pass options to the | |
891 | kernel at boot time.) | |
892 | ||
1da177e4 LT |
893 | config SERIAL_SGI_L1_CONSOLE |
894 | bool "SGI Altix L1 serial console support" | |
895 | depends on IA64_GENERIC || IA64_SGI_SN2 | |
896 | select SERIAL_CORE | |
897 | select SERIAL_CORE_CONSOLE | |
898 | help | |
899 | If you have an SGI Altix and you would like to use the system | |
900 | controller serial port as your console (you want this!), | |
901 | say Y. Otherwise, say N. | |
902 | ||
903 | config SERIAL_MPC52xx | |
25ae3a07 JR |
904 | tristate "Freescale MPC52xx/MPC512x family PSC serial support" |
905 | depends on PPC_MPC52xx || PPC_MPC512x | |
1da177e4 LT |
906 | select SERIAL_CORE |
907 | help | |
25ae3a07 JR |
908 | This driver supports MPC52xx and MPC512x PSC serial ports. If you would |
909 | like to use them, you must answer Y or M to this option. Note that | |
1da177e4 LT |
910 | for use as console, it must be included in kernel and not as a |
911 | module. | |
912 | ||
913 | config SERIAL_MPC52xx_CONSOLE | |
25ae3a07 | 914 | bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" |
1da177e4 LT |
915 | depends on SERIAL_MPC52xx=y |
916 | select SERIAL_CORE_CONSOLE | |
917 | help | |
918 | Select this options if you'd like to use one of the PSC serial port | |
919 | of the Freescale MPC52xx family as a console. | |
920 | ||
921 | config SERIAL_MPC52xx_CONSOLE_BAUD | |
25ae3a07 | 922 | int "Freescale MPC52xx/MPC512x family PSC serial port baud" |
1da177e4 LT |
923 | depends on SERIAL_MPC52xx_CONSOLE=y |
924 | default "9600" | |
925 | help | |
926 | Select the MPC52xx console baud rate. | |
927 | This value is only used if the bootloader doesn't pass in the | |
928 | console baudrate | |
929 | ||
930 | config SERIAL_ICOM | |
931 | tristate "IBM Multiport Serial Adapter" | |
c17a9d4c | 932 | depends on PCI && PPC_PSERIES |
1da177e4 | 933 | select SERIAL_CORE |
cb2fc532 | 934 | select FW_LOADER |
1da177e4 LT |
935 | help |
936 | This driver is for a family of multiport serial adapters | |
937 | including 2 port RVX, 2 port internal modem, 4 port internal | |
938 | modem and a split 1 port RVX and 1 port internal modem. | |
939 | ||
940 | This driver can also be built as a module. If so, the module | |
941 | will be called icom. | |
942 | ||
943 | config SERIAL_M32R_SIO | |
944 | bool "M32R SIO I/F" | |
945 | depends on M32R | |
946 | default y | |
947 | select SERIAL_CORE | |
948 | help | |
949 | Say Y here if you want to use the M32R serial controller. | |
950 | ||
951 | config SERIAL_M32R_SIO_CONSOLE | |
952 | bool "use SIO console" | |
953 | depends on SERIAL_M32R_SIO=y | |
954 | select SERIAL_CORE_CONSOLE | |
955 | help | |
956 | Say Y here if you want to support a serial console. | |
957 | ||
958 | If you use an M3T-M32700UT or an OPSPUT platform, | |
959 | please say also y for SERIAL_M32R_PLDSIO. | |
960 | ||
961 | config SERIAL_M32R_PLDSIO | |
962 | bool "M32R SIO I/F on a PLD" | |
d600b97c | 963 | depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) |
1da177e4 LT |
964 | default n |
965 | help | |
966 | Say Y here if you want to use the M32R serial controller | |
967 | on a PLD (Programmable Logic Device). | |
968 | ||
969 | If you use an M3T-M32700UT or an OPSPUT platform, | |
970 | please say Y. | |
971 | ||
972 | config SERIAL_TXX9 | |
973 | bool "TMPTX39XX/49XX SIO support" | |
bef1f402 | 974 | depends on HAS_TXX9_SERIAL |
1da177e4 LT |
975 | select SERIAL_CORE |
976 | default y | |
977 | ||
978 | config HAS_TXX9_SERIAL | |
979 | bool | |
980 | ||
138c5d25 AN |
981 | config SERIAL_TXX9_NR_UARTS |
982 | int "Maximum number of TMPTX39XX/49XX SIO ports" | |
983 | depends on SERIAL_TXX9 | |
984 | default "6" | |
985 | ||
1da177e4 LT |
986 | config SERIAL_TXX9_CONSOLE |
987 | bool "TMPTX39XX/49XX SIO Console support" | |
988 | depends on SERIAL_TXX9=y | |
989 | select SERIAL_CORE_CONSOLE | |
990 | ||
991 | config SERIAL_TXX9_STDSERIAL | |
992 | bool "TX39XX/49XX SIO act as standard serial" | |
993 | depends on !SERIAL_8250 && SERIAL_TXX9 | |
994 | ||
995 | config SERIAL_VR41XX | |
996 | tristate "NEC VR4100 series Serial Interface Unit support" | |
997 | depends on CPU_VR41XX | |
998 | select SERIAL_CORE | |
999 | help | |
1000 | If you have a NEC VR4100 series processor and you want to use | |
1001 | Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) | |
1002 | (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. | |
1003 | ||
1004 | config SERIAL_VR41XX_CONSOLE | |
1005 | bool "Enable NEC VR4100 series Serial Interface Unit console" | |
2174041d | 1006 | depends on SERIAL_VR41XX=y |
1da177e4 LT |
1007 | select SERIAL_CORE_CONSOLE |
1008 | help | |
1009 | If you have a NEC VR4100 series processor and you want to use | |
1010 | a console on a serial port, say Y. Otherwise, say N. | |
1011 | ||
1012 | config SERIAL_JSM | |
03a8482c | 1013 | tristate "Digi International NEO and Classic PCI Support" |
0a577ce3 AK |
1014 | depends on PCI |
1015 | select SERIAL_CORE | |
1016 | help | |
03a8482c | 1017 | This is a driver for Digi International's Neo and Classic series |
0a577ce3 AK |
1018 | of cards which provide multiple serial ports. You would need |
1019 | something like this to connect more than two modems to your Linux | |
1020 | box, for instance in order to become a dial-in server. This driver | |
1021 | supports PCI boards only. | |
a5f1e4ed AO |
1022 | |
1023 | If you have a card like this, say Y here, otherwise say N. | |
0a577ce3 AK |
1024 | |
1025 | To compile this driver as a module, choose M here: the | |
1026 | module will be called jsm. | |
1da177e4 | 1027 | |
e5d310b3 BC |
1028 | config SERIAL_SGI_IOC4 |
1029 | tristate "SGI IOC4 controller serial support" | |
1030 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 | |
1031 | select SERIAL_CORE | |
1032 | help | |
1033 | If you have an SGI Altix with an IOC4 based Base IO card | |
1034 | and wish to use the serial ports on this card, say Y. | |
1035 | Otherwise, say N. | |
1036 | ||
2d0cfb52 PG |
1037 | config SERIAL_SGI_IOC3 |
1038 | tristate "SGI Altix IOC3 serial support" | |
1039 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 | |
1040 | select SERIAL_CORE | |
1041 | help | |
1042 | If you have an SGI Altix with an IOC3 serial card, | |
1043 | say Y or M. Otherwise, say N. | |
1044 | ||
04896a77 RL |
1045 | config SERIAL_MSM |
1046 | bool "MSM on-chip serial port support" | |
e23407d8 | 1047 | depends on ARCH_QCOM |
04896a77 RL |
1048 | select SERIAL_CORE |
1049 | ||
1050 | config SERIAL_MSM_CONSOLE | |
1051 | bool "MSM serial console support" | |
1052 | depends on SERIAL_MSM=y | |
1053 | select SERIAL_CORE_CONSOLE | |
0efe7296 | 1054 | select SERIAL_EARLYCON |
04896a77 | 1055 | |
304e1266 AC |
1056 | config SERIAL_VT8500 |
1057 | bool "VIA VT8500 on-chip serial port support" | |
18e0749a | 1058 | depends on ARCH_VT8500 |
304e1266 AC |
1059 | select SERIAL_CORE |
1060 | ||
1061 | config SERIAL_VT8500_CONSOLE | |
1062 | bool "VIA VT8500 serial console support" | |
1063 | depends on SERIAL_VT8500=y | |
1064 | select SERIAL_CORE_CONSOLE | |
1065 | ||
692132b5 NC |
1066 | config SERIAL_ETRAXFS |
1067 | bool "ETRAX FS serial port support" | |
1068 | depends on ETRAX_ARCH_V32 && OF | |
1069 | select SERIAL_CORE | |
7b9c5162 | 1070 | select SERIAL_MCTRL_GPIO if GPIOLIB |
692132b5 NC |
1071 | |
1072 | config SERIAL_ETRAXFS_CONSOLE | |
1073 | bool "ETRAX FS serial console support" | |
1074 | depends on SERIAL_ETRAXFS | |
1075 | select SERIAL_CORE_CONSOLE | |
1076 | ||
f8441e13 | 1077 | config SERIAL_NETX |
fb881f78 | 1078 | tristate "NetX serial port support" |
18e0749a | 1079 | depends on ARCH_NETX |
f8441e13 SH |
1080 | select SERIAL_CORE |
1081 | help | |
1082 | If you have a machine based on a Hilscher NetX SoC you | |
1083 | can enable its onboard serial port by enabling this option. | |
1084 | ||
1085 | To compile this driver as a module, choose M here: the | |
1086 | module will be called netx-serial. | |
1087 | ||
1088 | config SERIAL_NETX_CONSOLE | |
1089 | bool "Console on NetX serial port" | |
fb881f78 | 1090 | depends on SERIAL_NETX=y |
f8441e13 SH |
1091 | select SERIAL_CORE_CONSOLE |
1092 | help | |
b885b27c UKK |
1093 | If you have enabled the serial port on the Hilscher NetX SoC |
1094 | you can make it the console by answering Y to this option. | |
f8441e13 | 1095 | |
8d38a5b2 AB |
1096 | config SERIAL_OF_PLATFORM |
1097 | tristate "Serial port on Open Firmware platform bus" | |
236cdc7b | 1098 | depends on OF |
5886188d | 1099 | depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL |
8d38a5b2 AB |
1100 | help |
1101 | If you have a PowerPC based system that has serial ports | |
1102 | on a platform specific bus, you should enable this option. | |
1103 | Currently, only 8250 compatible ports are supported, but | |
1104 | others can easily be added. | |
1105 | ||
b612633b G |
1106 | config SERIAL_OMAP |
1107 | tristate "OMAP serial port support" | |
f3706266 | 1108 | depends on ARCH_OMAP2PLUS |
b612633b G |
1109 | select SERIAL_CORE |
1110 | help | |
1111 | If you have a machine based on an Texas Instruments OMAP CPU you | |
1112 | can enable its onboard serial ports by enabling this option. | |
1113 | ||
1114 | By enabling this option you take advantage of dma feature available | |
1115 | with the omap-serial driver. DMA support can be enabled from platform | |
1116 | data. | |
1117 | ||
1118 | config SERIAL_OMAP_CONSOLE | |
1119 | bool "Console on OMAP serial port" | |
d8c4019b | 1120 | depends on SERIAL_OMAP=y |
b612633b G |
1121 | select SERIAL_CORE_CONSOLE |
1122 | help | |
1123 | Select this option if you would like to use omap serial port as | |
1124 | console. | |
1125 | ||
1126 | Even if you say Y here, the currently visible virtual console | |
1127 | (/dev/tty0) will still be used as the system console by default, but | |
1128 | you can alter that using a kernel command line option such as | |
1129 | "console=ttyOx". (Try "man bootparam" or see the documentation of | |
1130 | your boot loader about how to pass options to the kernel at | |
1131 | boot time.) | |
1132 | ||
5886188d BK |
1133 | config SERIAL_OF_PLATFORM_NWPSERIAL |
1134 | tristate "NWP serial port driver" | |
213dce3c | 1135 | depends on PPC_DCR |
5886188d BK |
1136 | select SERIAL_OF_PLATFORM |
1137 | select SERIAL_CORE_CONSOLE | |
1138 | select SERIAL_CORE | |
1139 | help | |
1140 | This driver supports the cell network processor nwp serial | |
1141 | device. | |
1142 | ||
1143 | config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE | |
1144 | bool "Console on NWP serial port" | |
1145 | depends on SERIAL_OF_PLATFORM_NWPSERIAL=y | |
1146 | select SERIAL_CORE_CONSOLE | |
1147 | help | |
1148 | Support for Console on the NWP serial ports. | |
1149 | ||
2f0fc415 JC |
1150 | config SERIAL_LANTIQ |
1151 | bool "Lantiq serial driver" | |
1152 | depends on LANTIQ | |
1153 | select SERIAL_CORE | |
1154 | select SERIAL_CORE_CONSOLE | |
1155 | help | |
1156 | Support for console and UART on Lantiq SoCs. | |
1157 | ||
d7584ed2 TT |
1158 | config SERIAL_QE |
1159 | tristate "Freescale QUICC Engine serial port support" | |
1160 | depends on QUICC_ENGINE | |
1161 | select SERIAL_CORE | |
1162 | select FW_LOADER | |
1163 | default n | |
1164 | help | |
1165 | This driver supports the QE serial ports on Freescale embedded | |
1166 | PowerPC that contain a QUICC Engine. | |
1167 | ||
1d65c0b1 | 1168 | config SERIAL_SCCNXP |
725dd00a | 1169 | tristate "SCCNXP serial port support" |
1d65c0b1 | 1170 | select SERIAL_CORE |
1d65c0b1 AS |
1171 | help |
1172 | This selects support for an advanced UART from NXP (Philips). | |
1173 | Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92, | |
1174 | SC28L202, SCC68681 and SCC68692. | |
1d65c0b1 AS |
1175 | |
1176 | config SERIAL_SCCNXP_CONSOLE | |
1177 | bool "Console on SCCNXP serial port" | |
725dd00a | 1178 | depends on SERIAL_SCCNXP=y |
1d65c0b1 AS |
1179 | select SERIAL_CORE_CONSOLE |
1180 | help | |
1181 | Support for console on SCCNXP serial ports. | |
1182 | ||
2c837a8a RKKI |
1183 | config SERIAL_SC16IS7XX_CORE |
1184 | tristate | |
1185 | ||
dfeae619 | 1186 | config SERIAL_SC16IS7XX |
2c837a8a RKKI |
1187 | tristate "SC16IS7xx serial support" |
1188 | select SERIAL_CORE | |
32aa6339 | 1189 | depends on (SPI_MASTER && !I2C) || I2C |
2c837a8a RKKI |
1190 | help |
1191 | This selects support for SC16IS7xx serial ports. | |
1192 | Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, | |
1193 | SC16IS760 and SC16IS762. Select supported buses using options below. | |
1194 | ||
1195 | config SERIAL_SC16IS7XX_I2C | |
1196 | bool "SC16IS7xx for I2C interface" | |
1197 | depends on SERIAL_SC16IS7XX | |
1198 | depends on I2C | |
1199 | select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX | |
1200 | select REGMAP_I2C if I2C | |
1201 | default y | |
1202 | help | |
1203 | Enable SC16IS7xx driver on I2C bus, | |
1204 | If required say y, and say n to i2c if not required, | |
1205 | Enabled by default to support oldconfig. | |
1206 | You must select at least one bus for the driver to be built. | |
1207 | ||
1208 | config SERIAL_SC16IS7XX_SPI | |
1209 | bool "SC16IS7xx for spi interface" | |
1210 | depends on SERIAL_SC16IS7XX | |
1211 | depends on SPI_MASTER | |
1212 | select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX | |
1213 | select REGMAP_SPI if SPI_MASTER | |
1214 | help | |
1215 | Enable SC16IS7xx driver on SPI bus, | |
1216 | If required say y, and say n to spi if not required, | |
1217 | This is additional support to exsisting driver. | |
1218 | You must select at least one bus for the driver to be built. | |
dfeae619 | 1219 | |
2f351741 | 1220 | config SERIAL_BFIN_SPORT |
d671250b MF |
1221 | tristate "Blackfin SPORT emulate UART" |
1222 | depends on BLACKFIN | |
2f351741 BW |
1223 | select SERIAL_CORE |
1224 | help | |
692105b8 | 1225 | Enable SPORT emulate UART on Blackfin series. |
2f351741 BW |
1226 | |
1227 | To compile this driver as a module, choose M here: the | |
1228 | module will be called bfin_sport_uart. | |
1229 | ||
ccf68e59 | 1230 | config SERIAL_BFIN_SPORT_CONSOLE |
1231 | bool "Console on Blackfin sport emulated uart" | |
1232 | depends on SERIAL_BFIN_SPORT=y | |
1233 | select SERIAL_CORE_CONSOLE | |
2f351741 | 1234 | |
ccf68e59 | 1235 | config SERIAL_BFIN_SPORT0_UART |
1236 | bool "Enable UART over SPORT0" | |
be991593 | 1237 | depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) |
ccf68e59 | 1238 | help |
1239 | Enable UART over SPORT0 | |
2f351741 | 1240 | |
1f7d1c85 SZ |
1241 | config SERIAL_BFIN_SPORT0_UART_CTSRTS |
1242 | bool "Enable UART over SPORT0 hardware flow control" | |
1243 | depends on SERIAL_BFIN_SPORT0_UART | |
1244 | help | |
1245 | Enable hardware flow control in the driver. | |
1246 | ||
ccf68e59 | 1247 | config SERIAL_BFIN_SPORT1_UART |
1248 | bool "Enable UART over SPORT1" | |
1249 | depends on SERIAL_BFIN_SPORT | |
1250 | help | |
1251 | Enable UART over SPORT1 | |
2f351741 | 1252 | |
1f7d1c85 SZ |
1253 | config SERIAL_BFIN_SPORT1_UART_CTSRTS |
1254 | bool "Enable UART over SPORT1 hardware flow control" | |
1255 | depends on SERIAL_BFIN_SPORT1_UART | |
1256 | help | |
1257 | Enable hardware flow control in the driver. | |
1258 | ||
ccf68e59 | 1259 | config SERIAL_BFIN_SPORT2_UART |
1260 | bool "Enable UART over SPORT2" | |
1261 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) | |
1262 | help | |
1263 | Enable UART over SPORT2 | |
2f351741 | 1264 | |
1f7d1c85 SZ |
1265 | config SERIAL_BFIN_SPORT2_UART_CTSRTS |
1266 | bool "Enable UART over SPORT2 hardware flow control" | |
1267 | depends on SERIAL_BFIN_SPORT2_UART | |
1268 | help | |
1269 | Enable hardware flow control in the driver. | |
1270 | ||
ccf68e59 | 1271 | config SERIAL_BFIN_SPORT3_UART |
1272 | bool "Enable UART over SPORT3" | |
1273 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) | |
1274 | help | |
1275 | Enable UART over SPORT3 | |
2f351741 | 1276 | |
1f7d1c85 SZ |
1277 | config SERIAL_BFIN_SPORT3_UART_CTSRTS |
1278 | bool "Enable UART over SPORT3 hardware flow control" | |
1279 | depends on SERIAL_BFIN_SPORT3_UART | |
1280 | help | |
1281 | Enable hardware flow control in the driver. | |
1282 | ||
34aec591 RR |
1283 | config SERIAL_TIMBERDALE |
1284 | tristate "Support for timberdale UART" | |
34aec591 | 1285 | select SERIAL_CORE |
e55c2a07 | 1286 | depends on X86_32 || COMPILE_TEST |
34aec591 RR |
1287 | ---help--- |
1288 | Add support for UART controller on timberdale. | |
1289 | ||
9fcd66e5 | 1290 | config SERIAL_BCM63XX |
4b65208f | 1291 | tristate "Broadcom BCM63xx/BCM33xx UART support" |
9fcd66e5 | 1292 | select SERIAL_CORE |
c0ec3fd1 | 1293 | depends on MIPS || ARM || COMPILE_TEST |
9fcd66e5 | 1294 | help |
4b65208f KC |
1295 | This enables the driver for the onchip UART core found on |
1296 | the following chipsets: | |
9fcd66e5 | 1297 | |
4b65208f KC |
1298 | BCM33xx (cable modem) |
1299 | BCM63xx/BCM63xxx (DSL) | |
1300 | BCM68xx (PON) | |
1301 | BCM7xxx (STB) - DOCSIS console | |
9fcd66e5 MB |
1302 | |
1303 | config SERIAL_BCM63XX_CONSOLE | |
4b65208f | 1304 | bool "Console on BCM63xx serial port" |
9fcd66e5 MB |
1305 | depends on SERIAL_BCM63XX=y |
1306 | select SERIAL_CORE_CONSOLE | |
1ab8e4b1 | 1307 | select SERIAL_EARLYCON |
9fcd66e5 | 1308 | help |
4b65208f | 1309 | If you have enabled the serial port on the BCM63xx CPU |
9fcd66e5 MB |
1310 | you can make it the console by answering Y to this option. |
1311 | ||
d4ac42a5 KG |
1312 | config SERIAL_GRLIB_GAISLER_APBUART |
1313 | tristate "GRLIB APBUART serial support" | |
6cd7a637 | 1314 | depends on OF && SPARC |
fed7bb32 | 1315 | select SERIAL_CORE |
d4ac42a5 KG |
1316 | ---help--- |
1317 | Add support for the GRLIB APBUART serial port. | |
1318 | ||
1319 | config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE | |
1320 | bool "Console on GRLIB APBUART serial port" | |
1321 | depends on SERIAL_GRLIB_GAISLER_APBUART=y | |
1322 | select SERIAL_CORE_CONSOLE | |
1323 | help | |
1324 | Support for running a console on the GRLIB APBUART | |
1325 | ||
5bcd6010 TK |
1326 | config SERIAL_ALTERA_JTAGUART |
1327 | tristate "Altera JTAG UART support" | |
1328 | select SERIAL_CORE | |
1329 | help | |
1330 | This driver supports the Altera JTAG UART port. | |
1331 | ||
1332 | config SERIAL_ALTERA_JTAGUART_CONSOLE | |
1333 | bool "Altera JTAG UART console support" | |
1334 | depends on SERIAL_ALTERA_JTAGUART=y | |
1335 | select SERIAL_CORE_CONSOLE | |
1336 | help | |
1337 | Enable a Altera JTAG UART port to be the system console. | |
1338 | ||
1339 | config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS | |
1340 | bool "Bypass output when no connection" | |
1341 | depends on SERIAL_ALTERA_JTAGUART_CONSOLE | |
1342 | select SERIAL_CORE_CONSOLE | |
1343 | help | |
1344 | Bypass console output and keep going even if there is no | |
1345 | JTAG terminal connection with the host. | |
1346 | ||
6b7d8f8b TK |
1347 | config SERIAL_ALTERA_UART |
1348 | tristate "Altera UART support" | |
1349 | select SERIAL_CORE | |
1350 | help | |
1351 | This driver supports the Altera softcore UART port. | |
1352 | ||
1353 | config SERIAL_ALTERA_UART_MAXPORTS | |
1354 | int "Maximum number of Altera UART ports" | |
1355 | depends on SERIAL_ALTERA_UART | |
1356 | default 4 | |
1357 | help | |
1358 | This setting lets you define the maximum number of the Altera | |
1359 | UART ports. The usual default varies from board to board, and | |
1360 | this setting is a way of catering for that. | |
1361 | ||
1362 | config SERIAL_ALTERA_UART_BAUDRATE | |
1363 | int "Default baudrate for Altera UART ports" | |
1364 | depends on SERIAL_ALTERA_UART | |
1365 | default 115200 | |
1366 | help | |
1367 | This setting lets you define what the default baudrate is for the | |
1368 | Altera UART ports. The usual default varies from board to board, | |
1369 | and this setting is a way of catering for that. | |
1370 | ||
1371 | config SERIAL_ALTERA_UART_CONSOLE | |
1372 | bool "Altera UART console support" | |
1373 | depends on SERIAL_ALTERA_UART=y | |
1374 | select SERIAL_CORE_CONSOLE | |
1375 | help | |
1376 | Enable a Altera UART port to be the system console. | |
1377 | ||
af3b8881 | 1378 | config SERIAL_IFX6X60 |
5de69349 | 1379 | tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" |
b737eeb0 GU |
1380 | depends on GPIOLIB || COMPILE_TEST |
1381 | depends on SPI && HAS_DMA | |
af3b8881 RG |
1382 | help |
1383 | Support for the IFX6x60 modem devices on Intel MID platforms. | |
1384 | ||
3c6a4832 | 1385 | config SERIAL_PCH_UART |
8249f743 | 1386 | tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" |
06679345 | 1387 | depends on PCI && (X86_32 || COMPILE_TEST) |
3c6a4832 | 1388 | select SERIAL_CORE |
3c6a4832 TM |
1389 | help |
1390 | This driver is for PCH(Platform controller Hub) UART of Intel EG20T | |
1391 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
1392 | Enabling PCH_DMA, this PCH UART works as DMA mode. | |
4564e1ef | 1393 | |
8249f743 TM |
1394 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
1395 | Output Hub), ML7213, ML7223 and ML7831. | |
1396 | ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is | |
1397 | for MP(Media Phone) use and ML7831 IOH is for general purpose use. | |
1398 | ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
1399 | ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
daaf6ff4 | 1400 | |
e30f867d AS |
1401 | config SERIAL_PCH_UART_CONSOLE |
1402 | bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" | |
1403 | depends on SERIAL_PCH_UART=y | |
1404 | select SERIAL_CORE_CONSOLE | |
1405 | help | |
1406 | Say Y here if you wish to use the PCH UART as the system console | |
1407 | (the system console is the device which receives all kernel messages and | |
1408 | warnings and which allows logins in single user mode). | |
1409 | ||
47d37d6f SH |
1410 | config SERIAL_MXS_AUART |
1411 | depends on ARCH_MXS | |
1412 | tristate "MXS AUART support" | |
1413 | select SERIAL_CORE | |
7c573d7e | 1414 | select SERIAL_MCTRL_GPIO if GPIOLIB |
47d37d6f SH |
1415 | help |
1416 | This driver supports the MXS Application UART (AUART) port. | |
1417 | ||
1418 | config SERIAL_MXS_AUART_CONSOLE | |
1419 | bool "MXS AUART console support" | |
1420 | depends on SERIAL_MXS_AUART=y | |
1421 | select SERIAL_CORE_CONSOLE | |
1422 | help | |
1423 | Enable a MXS AUART port to be the system console. | |
1424 | ||
61ec9016 | 1425 | config SERIAL_XILINX_PS_UART |
d9bb3fb1 | 1426 | tristate "Cadence (Xilinx Zynq) UART support" |
4bb535d2 | 1427 | depends on OF |
61ec9016 JL |
1428 | select SERIAL_CORE |
1429 | help | |
d9bb3fb1 SB |
1430 | This driver supports the Cadence UART. It is found e.g. in Xilinx |
1431 | Zynq. | |
61ec9016 JL |
1432 | |
1433 | config SERIAL_XILINX_PS_UART_CONSOLE | |
d9bb3fb1 | 1434 | bool "Cadence UART console support" |
61ec9016 JL |
1435 | depends on SERIAL_XILINX_PS_UART=y |
1436 | select SERIAL_CORE_CONSOLE | |
6fa62fc4 | 1437 | select SERIAL_EARLYCON |
61ec9016 | 1438 | help |
d9bb3fb1 | 1439 | Enable a Cadence UART port to be the system console. |
61ec9016 | 1440 | |
d57f341b | 1441 | config SERIAL_AR933X |
284301ef | 1442 | tristate "AR933X serial port support" |
15ef17f6 | 1443 | depends on HAVE_CLK && SOC_AR933X |
d57f341b GJ |
1444 | select SERIAL_CORE |
1445 | help | |
1446 | If you have an Atheros AR933X SOC based board and want to use the | |
1447 | built-in UART of the SoC, say Y to this option. | |
1448 | ||
284301ef GJ |
1449 | To compile this driver as a module, choose M here: the |
1450 | module will be called ar933x_uart. | |
1451 | ||
d57f341b GJ |
1452 | config SERIAL_AR933X_CONSOLE |
1453 | bool "Console on AR933X serial port" | |
1454 | depends on SERIAL_AR933X=y | |
1455 | select SERIAL_CORE_CONSOLE | |
1456 | help | |
1457 | Enable a built-in UART port of the AR933X to be the system console. | |
1458 | ||
1459 | config SERIAL_AR933X_NR_UARTS | |
1460 | int "Maximum number of AR933X serial ports" | |
1461 | depends on SERIAL_AR933X | |
1462 | default "2" | |
1463 | help | |
1464 | Set this to the number of serial ports you want the driver | |
1465 | to support. | |
1466 | ||
3afbd89c | 1467 | config SERIAL_EFM32_UART |
2f2a0c70 UKK |
1468 | tristate "EFM32 UART/USART port" |
1469 | depends on ARM && (ARCH_EFM32 || COMPILE_TEST) | |
3afbd89c UKK |
1470 | select SERIAL_CORE |
1471 | help | |
1472 | This driver support the USART and UART ports on | |
1473 | Energy Micro's efm32 SoCs. | |
1474 | ||
1475 | config SERIAL_EFM32_UART_CONSOLE | |
1476 | bool "EFM32 UART/USART console support" | |
1477 | depends on SERIAL_EFM32_UART=y | |
1478 | select SERIAL_CORE_CONSOLE | |
1479 | ||
b5c6c1a7 CM |
1480 | config SERIAL_TILEGX |
1481 | tristate "TILE-Gx on-chip serial port support" | |
1482 | depends on TILEGX | |
1483 | select TILE_GXIO_UART | |
1484 | select SERIAL_CORE | |
1485 | ---help--- | |
1486 | This device provides access to the on-chip UARTs on the TILE-Gx | |
1487 | processor. | |
1488 | ||
2ac4ad2a VG |
1489 | config SERIAL_ARC |
1490 | tristate "ARC UART driver support" | |
1491 | select SERIAL_CORE | |
1492 | help | |
1493 | Driver for on-chip UART for ARC(Synopsys) for the legacy | |
1494 | FPGA Boards (ML50x/ARCAngel4) | |
1495 | ||
1496 | config SERIAL_ARC_CONSOLE | |
1497 | bool "Console on ARC UART" | |
1498 | depends on SERIAL_ARC=y | |
1499 | select SERIAL_CORE_CONSOLE | |
27cfe4ec | 1500 | select SERIAL_EARLYCON |
2ac4ad2a VG |
1501 | help |
1502 | Enable system Console on ARC UART | |
1503 | ||
1504 | config SERIAL_ARC_NR_PORTS | |
1505 | int "Number of ARC UART ports" | |
1506 | depends on SERIAL_ARC | |
1507 | range 1 3 | |
1508 | default "1" | |
1509 | help | |
1510 | Set this to the number of serial ports you want the driver | |
1511 | to support. | |
1512 | ||
7d9f49af KC |
1513 | config SERIAL_RP2 |
1514 | tristate "Comtrol RocketPort EXPRESS/INFINITY support" | |
1515 | depends on PCI | |
1516 | select SERIAL_CORE | |
1517 | help | |
1518 | This driver supports the Comtrol RocketPort EXPRESS and | |
1519 | RocketPort INFINITY families of PCI/PCIe multiport serial adapters. | |
1520 | These adapters use a "RocketPort 2" ASIC that is not compatible | |
1521 | with the original RocketPort driver (CONFIG_ROCKETPORT). | |
1522 | ||
1523 | To compile this driver as a module, choose M here: the | |
1524 | module will be called rp2. | |
1525 | ||
1526 | If you want to compile this driver into the kernel, say Y here. If | |
1527 | you don't have a suitable RocketPort card installed, say N. | |
1528 | ||
1529 | config SERIAL_RP2_NR_UARTS | |
1530 | int "Maximum number of RocketPort EXPRESS/INFINITY ports" | |
1531 | depends on SERIAL_RP2 | |
1532 | default "32" | |
1533 | help | |
1534 | If multiple cards are present, the default limit of 32 ports may | |
1535 | need to be increased. | |
1536 | ||
c9e2e946 JL |
1537 | config SERIAL_FSL_LPUART |
1538 | tristate "Freescale lpuart serial port support" | |
ac623914 | 1539 | depends on HAS_DMA |
c9e2e946 JL |
1540 | select SERIAL_CORE |
1541 | help | |
1542 | Support for the on-chip lpuart on some Freescale SOCs. | |
1543 | ||
1544 | config SERIAL_FSL_LPUART_CONSOLE | |
1545 | bool "Console on Freescale lpuart serial port" | |
1546 | depends on SERIAL_FSL_LPUART=y | |
1547 | select SERIAL_CORE_CONSOLE | |
1548 | help | |
1549 | If you have enabled the lpuart serial port on the Freescale SoCs, | |
1550 | you can make it the console by answering Y to this option. | |
1551 | ||
5930cb35 BS |
1552 | config SERIAL_CONEXANT_DIGICOLOR |
1553 | tristate "Conexant Digicolor CX92xxx USART serial port support" | |
1554 | depends on OF | |
1555 | select SERIAL_CORE | |
1556 | help | |
1557 | Support for the on-chip USART on Conexant Digicolor SoCs. | |
1558 | ||
1559 | config SERIAL_CONEXANT_DIGICOLOR_CONSOLE | |
1560 | bool "Console on Conexant Digicolor serial port" | |
1561 | depends on SERIAL_CONEXANT_DIGICOLOR=y | |
1562 | select SERIAL_CORE_CONSOLE | |
1563 | help | |
1564 | If you have enabled the USART serial port on Conexant Digicolor | |
1565 | SoCs, you can make it the console by answering Y to this option. | |
1566 | ||
c4b05856 SK |
1567 | config SERIAL_ST_ASC |
1568 | tristate "ST ASC serial port support" | |
1569 | select SERIAL_CORE | |
965e260a | 1570 | depends on ARM || COMPILE_TEST |
c4b05856 SK |
1571 | help |
1572 | This driver is for the on-chip Asychronous Serial Controller on | |
1573 | STMicroelectronics STi SoCs. | |
1574 | ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. | |
1575 | It support all industry standard baud rates. | |
1576 | ||
1577 | If unsure, say N. | |
1578 | ||
1579 | config SERIAL_ST_ASC_CONSOLE | |
1580 | bool "Support for console on ST ASC" | |
1581 | depends on SERIAL_ST_ASC=y | |
1582 | select SERIAL_CORE_CONSOLE | |
1583 | ||
e264ebf4 JT |
1584 | config SERIAL_MEN_Z135 |
1585 | tristate "MEN 16z135 Support" | |
717e1cb2 | 1586 | select SERIAL_CORE |
e264ebf4 JT |
1587 | depends on MCB |
1588 | help | |
1589 | Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core | |
1590 | on a MCB carrier. | |
1591 | ||
1592 | This driver can also be build as a module. If so, the module will be called | |
1593 | men_z135_uart.ko | |
1594 | ||
b7396a38 CZ |
1595 | config SERIAL_SPRD |
1596 | tristate "Support for Spreadtrum serial" | |
1597 | depends on ARCH_SPRD | |
1598 | select SERIAL_CORE | |
1599 | help | |
1600 | This enables the driver for the Spreadtrum's serial. | |
1601 | ||
1602 | config SERIAL_SPRD_CONSOLE | |
1603 | bool "Spreadtrum UART console support" | |
1604 | depends on SERIAL_SPRD=y | |
1605 | select SERIAL_CORE_CONSOLE | |
1606 | select SERIAL_EARLYCON | |
1607 | help | |
1608 | Support for early debug console using Spreadtrum's serial. This enables | |
1609 | the console before standard serial driver is probed. This is enabled | |
1610 | with "earlycon" on the kernel command line. The console is | |
1611 | enabled when early_param is processed. | |
1612 | ||
48a6092f MC |
1613 | config SERIAL_STM32 |
1614 | tristate "STMicroelectronics STM32 serial port support" | |
1615 | select SERIAL_CORE | |
1616 | depends on ARM || COMPILE_TEST | |
1617 | help | |
1618 | This driver is for the on-chip Serial Controller on | |
1619 | STMicroelectronics STM32 MCUs. | |
1620 | USART supports Rx & Tx functionality. | |
1621 | It support all industry standard baud rates. | |
1622 | ||
1623 | If unsure, say N. | |
1624 | ||
1625 | config SERIAL_STM32_CONSOLE | |
1626 | bool "Support for console on STM32" | |
1627 | depends on SERIAL_STM32=y | |
1628 | select SERIAL_CORE_CONSOLE | |
1629 | ||
1da177e4 | 1630 | endmenu |
4f73bc4d | 1631 | |
84130aac RG |
1632 | config SERIAL_MCTRL_GPIO |
1633 | tristate | |
1634 | ||
4f73bc4d | 1635 | endif # TTY |