]>
Commit | Line | Data |
---|---|---|
dfeae619 JR |
1 | /* |
2 | * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint | |
3 | * Author: Jon Ringle <jringle@gridpoint.com> | |
4 | * | |
5 | * Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | */ | |
13 | ||
14 | #include <linux/bitops.h> | |
15 | #include <linux/clk.h> | |
16 | #include <linux/delay.h> | |
17 | #include <linux/device.h> | |
18 | #include <linux/gpio.h> | |
19 | #include <linux/i2c.h> | |
20 | #include <linux/module.h> | |
21 | #include <linux/of.h> | |
22 | #include <linux/of_device.h> | |
23 | #include <linux/regmap.h> | |
24 | #include <linux/serial_core.h> | |
25 | #include <linux/serial.h> | |
26 | #include <linux/tty.h> | |
27 | #include <linux/tty_flip.h> | |
d952795d | 28 | #include <linux/uaccess.h> |
dfeae619 JR |
29 | |
30 | #define SC16IS7XX_NAME "sc16is7xx" | |
31 | ||
32 | /* SC16IS7XX register definitions */ | |
33 | #define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ | |
34 | #define SC16IS7XX_THR_REG (0x00) /* TX FIFO */ | |
35 | #define SC16IS7XX_IER_REG (0x01) /* Interrupt enable */ | |
36 | #define SC16IS7XX_IIR_REG (0x02) /* Interrupt Identification */ | |
37 | #define SC16IS7XX_FCR_REG (0x02) /* FIFO control */ | |
38 | #define SC16IS7XX_LCR_REG (0x03) /* Line Control */ | |
39 | #define SC16IS7XX_MCR_REG (0x04) /* Modem Control */ | |
40 | #define SC16IS7XX_LSR_REG (0x05) /* Line Status */ | |
41 | #define SC16IS7XX_MSR_REG (0x06) /* Modem Status */ | |
42 | #define SC16IS7XX_SPR_REG (0x07) /* Scratch Pad */ | |
43 | #define SC16IS7XX_TXLVL_REG (0x08) /* TX FIFO level */ | |
44 | #define SC16IS7XX_RXLVL_REG (0x09) /* RX FIFO level */ | |
45 | #define SC16IS7XX_IODIR_REG (0x0a) /* I/O Direction | |
46 | * - only on 75x/76x | |
47 | */ | |
48 | #define SC16IS7XX_IOSTATE_REG (0x0b) /* I/O State | |
49 | * - only on 75x/76x | |
50 | */ | |
51 | #define SC16IS7XX_IOINTENA_REG (0x0c) /* I/O Interrupt Enable | |
52 | * - only on 75x/76x | |
53 | */ | |
54 | #define SC16IS7XX_IOCONTROL_REG (0x0e) /* I/O Control | |
55 | * - only on 75x/76x | |
56 | */ | |
57 | #define SC16IS7XX_EFCR_REG (0x0f) /* Extra Features Control */ | |
58 | ||
59 | /* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */ | |
60 | #define SC16IS7XX_TCR_REG (0x06) /* Transmit control */ | |
61 | #define SC16IS7XX_TLR_REG (0x07) /* Trigger level */ | |
62 | ||
63 | /* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */ | |
64 | #define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */ | |
65 | #define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */ | |
66 | ||
67 | /* Enhanced Register set: Only if (LCR == 0xBF) */ | |
68 | #define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */ | |
69 | #define SC16IS7XX_XON1_REG (0x04) /* Xon1 word */ | |
70 | #define SC16IS7XX_XON2_REG (0x05) /* Xon2 word */ | |
71 | #define SC16IS7XX_XOFF1_REG (0x06) /* Xoff1 word */ | |
72 | #define SC16IS7XX_XOFF2_REG (0x07) /* Xoff2 word */ | |
73 | ||
74 | /* IER register bits */ | |
75 | #define SC16IS7XX_IER_RDI_BIT (1 << 0) /* Enable RX data interrupt */ | |
76 | #define SC16IS7XX_IER_THRI_BIT (1 << 1) /* Enable TX holding register | |
77 | * interrupt */ | |
78 | #define SC16IS7XX_IER_RLSI_BIT (1 << 2) /* Enable RX line status | |
79 | * interrupt */ | |
80 | #define SC16IS7XX_IER_MSI_BIT (1 << 3) /* Enable Modem status | |
81 | * interrupt */ | |
82 | ||
83 | /* IER register bits - write only if (EFR[4] == 1) */ | |
84 | #define SC16IS7XX_IER_SLEEP_BIT (1 << 4) /* Enable Sleep mode */ | |
85 | #define SC16IS7XX_IER_XOFFI_BIT (1 << 5) /* Enable Xoff interrupt */ | |
86 | #define SC16IS7XX_IER_RTSI_BIT (1 << 6) /* Enable nRTS interrupt */ | |
87 | #define SC16IS7XX_IER_CTSI_BIT (1 << 7) /* Enable nCTS interrupt */ | |
88 | ||
89 | /* FCR register bits */ | |
90 | #define SC16IS7XX_FCR_FIFO_BIT (1 << 0) /* Enable FIFO */ | |
91 | #define SC16IS7XX_FCR_RXRESET_BIT (1 << 1) /* Reset RX FIFO */ | |
92 | #define SC16IS7XX_FCR_TXRESET_BIT (1 << 2) /* Reset TX FIFO */ | |
93 | #define SC16IS7XX_FCR_RXLVLL_BIT (1 << 6) /* RX Trigger level LSB */ | |
94 | #define SC16IS7XX_FCR_RXLVLH_BIT (1 << 7) /* RX Trigger level MSB */ | |
95 | ||
96 | /* FCR register bits - write only if (EFR[4] == 1) */ | |
97 | #define SC16IS7XX_FCR_TXLVLL_BIT (1 << 4) /* TX Trigger level LSB */ | |
98 | #define SC16IS7XX_FCR_TXLVLH_BIT (1 << 5) /* TX Trigger level MSB */ | |
99 | ||
100 | /* IIR register bits */ | |
101 | #define SC16IS7XX_IIR_NO_INT_BIT (1 << 0) /* No interrupts pending */ | |
102 | #define SC16IS7XX_IIR_ID_MASK 0x3e /* Mask for the interrupt ID */ | |
103 | #define SC16IS7XX_IIR_THRI_SRC 0x02 /* TX holding register empty */ | |
104 | #define SC16IS7XX_IIR_RDI_SRC 0x04 /* RX data interrupt */ | |
105 | #define SC16IS7XX_IIR_RLSE_SRC 0x06 /* RX line status error */ | |
106 | #define SC16IS7XX_IIR_RTOI_SRC 0x0c /* RX time-out interrupt */ | |
107 | #define SC16IS7XX_IIR_MSI_SRC 0x00 /* Modem status interrupt | |
108 | * - only on 75x/76x | |
109 | */ | |
110 | #define SC16IS7XX_IIR_INPIN_SRC 0x30 /* Input pin change of state | |
111 | * - only on 75x/76x | |
112 | */ | |
113 | #define SC16IS7XX_IIR_XOFFI_SRC 0x10 /* Received Xoff */ | |
114 | #define SC16IS7XX_IIR_CTSRTS_SRC 0x20 /* nCTS,nRTS change of state | |
115 | * from active (LOW) | |
116 | * to inactive (HIGH) | |
117 | */ | |
118 | /* LCR register bits */ | |
119 | #define SC16IS7XX_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ | |
120 | #define SC16IS7XX_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 | |
121 | * | |
122 | * Word length bits table: | |
123 | * 00 -> 5 bit words | |
124 | * 01 -> 6 bit words | |
125 | * 10 -> 7 bit words | |
126 | * 11 -> 8 bit words | |
127 | */ | |
128 | #define SC16IS7XX_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit | |
129 | * | |
130 | * STOP length bit table: | |
131 | * 0 -> 1 stop bit | |
132 | * 1 -> 1-1.5 stop bits if | |
133 | * word length is 5, | |
134 | * 2 stop bits otherwise | |
135 | */ | |
136 | #define SC16IS7XX_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ | |
137 | #define SC16IS7XX_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ | |
138 | #define SC16IS7XX_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ | |
139 | #define SC16IS7XX_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ | |
140 | #define SC16IS7XX_LCR_DLAB_BIT (1 << 7) /* Divisor Latch enable */ | |
141 | #define SC16IS7XX_LCR_WORD_LEN_5 (0x00) | |
142 | #define SC16IS7XX_LCR_WORD_LEN_6 (0x01) | |
143 | #define SC16IS7XX_LCR_WORD_LEN_7 (0x02) | |
144 | #define SC16IS7XX_LCR_WORD_LEN_8 (0x03) | |
145 | #define SC16IS7XX_LCR_CONF_MODE_A SC16IS7XX_LCR_DLAB_BIT /* Special | |
146 | * reg set */ | |
147 | #define SC16IS7XX_LCR_CONF_MODE_B 0xBF /* Enhanced | |
148 | * reg set */ | |
149 | ||
150 | /* MCR register bits */ | |
151 | #define SC16IS7XX_MCR_DTR_BIT (1 << 0) /* DTR complement | |
152 | * - only on 75x/76x | |
153 | */ | |
154 | #define SC16IS7XX_MCR_RTS_BIT (1 << 1) /* RTS complement */ | |
155 | #define SC16IS7XX_MCR_TCRTLR_BIT (1 << 2) /* TCR/TLR register enable */ | |
156 | #define SC16IS7XX_MCR_LOOP_BIT (1 << 4) /* Enable loopback test mode */ | |
157 | #define SC16IS7XX_MCR_XONANY_BIT (1 << 5) /* Enable Xon Any | |
158 | * - write enabled | |
159 | * if (EFR[4] == 1) | |
160 | */ | |
161 | #define SC16IS7XX_MCR_IRDA_BIT (1 << 6) /* Enable IrDA mode | |
162 | * - write enabled | |
163 | * if (EFR[4] == 1) | |
164 | */ | |
165 | #define SC16IS7XX_MCR_CLKSEL_BIT (1 << 7) /* Divide clock by 4 | |
166 | * - write enabled | |
167 | * if (EFR[4] == 1) | |
168 | */ | |
169 | ||
170 | /* LSR register bits */ | |
171 | #define SC16IS7XX_LSR_DR_BIT (1 << 0) /* Receiver data ready */ | |
172 | #define SC16IS7XX_LSR_OE_BIT (1 << 1) /* Overrun Error */ | |
173 | #define SC16IS7XX_LSR_PE_BIT (1 << 2) /* Parity Error */ | |
174 | #define SC16IS7XX_LSR_FE_BIT (1 << 3) /* Frame Error */ | |
175 | #define SC16IS7XX_LSR_BI_BIT (1 << 4) /* Break Interrupt */ | |
176 | #define SC16IS7XX_LSR_BRK_ERROR_MASK 0x1E /* BI, FE, PE, OE bits */ | |
177 | #define SC16IS7XX_LSR_THRE_BIT (1 << 5) /* TX holding register empty */ | |
178 | #define SC16IS7XX_LSR_TEMT_BIT (1 << 6) /* Transmitter empty */ | |
179 | #define SC16IS7XX_LSR_FIFOE_BIT (1 << 7) /* Fifo Error */ | |
180 | ||
181 | /* MSR register bits */ | |
182 | #define SC16IS7XX_MSR_DCTS_BIT (1 << 0) /* Delta CTS Clear To Send */ | |
183 | #define SC16IS7XX_MSR_DDSR_BIT (1 << 1) /* Delta DSR Data Set Ready | |
184 | * or (IO4) | |
185 | * - only on 75x/76x | |
186 | */ | |
187 | #define SC16IS7XX_MSR_DRI_BIT (1 << 2) /* Delta RI Ring Indicator | |
188 | * or (IO7) | |
189 | * - only on 75x/76x | |
190 | */ | |
191 | #define SC16IS7XX_MSR_DCD_BIT (1 << 3) /* Delta CD Carrier Detect | |
192 | * or (IO6) | |
193 | * - only on 75x/76x | |
194 | */ | |
195 | #define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */ | |
196 | #define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4) | |
197 | * - only on 75x/76x | |
198 | */ | |
199 | #define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7) | |
200 | * - only on 75x/76x | |
201 | */ | |
202 | #define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6) | |
203 | * - only on 75x/76x | |
204 | */ | |
205 | #define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */ | |
206 | ||
207 | /* | |
208 | * TCR register bits | |
209 | * TCR trigger levels are available from 0 to 60 characters with a granularity | |
210 | * of four. | |
211 | * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is | |
212 | * no built-in hardware check to make sure this condition is met. Also, the TCR | |
213 | * must be programmed with this condition before auto RTS or software flow | |
214 | * control is enabled to avoid spurious operation of the device. | |
215 | */ | |
216 | #define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0) | |
217 | #define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4) | |
218 | ||
219 | /* | |
220 | * TLR register bits | |
221 | * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the | |
222 | * FIFO Control Register (FCR) are used for the transmit and receive FIFO | |
223 | * trigger levels. Trigger levels from 4 characters to 60 characters are | |
224 | * available with a granularity of four. | |
225 | * | |
226 | * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the | |
227 | * trigger level setting defined in FCR. If TLR has non-zero trigger level value | |
228 | * the trigger level defined in FCR is discarded. This applies to both transmit | |
229 | * FIFO and receive FIFO trigger level setting. | |
230 | * | |
231 | * When TLR is used for RX trigger level control, FCR[7:6] should be left at the | |
232 | * default state, that is, '00'. | |
233 | */ | |
234 | #define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0) | |
235 | #define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4) | |
236 | ||
237 | /* IOControl register bits (Only 750/760) */ | |
238 | #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ | |
239 | #define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */ | |
240 | #define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ | |
241 | ||
242 | /* EFCR register bits */ | |
243 | #define SC16IS7XX_EFCR_9BIT_MODE_BIT (1 << 0) /* Enable 9-bit or Multidrop | |
244 | * mode (RS485) */ | |
245 | #define SC16IS7XX_EFCR_RXDISABLE_BIT (1 << 1) /* Disable receiver */ | |
246 | #define SC16IS7XX_EFCR_TXDISABLE_BIT (1 << 2) /* Disable transmitter */ | |
247 | #define SC16IS7XX_EFCR_AUTO_RS485_BIT (1 << 4) /* Auto RS485 RTS direction */ | |
248 | #define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */ | |
249 | #define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode | |
250 | * 0 = rate upto 115.2 kbit/s | |
251 | * - Only 750/760 | |
252 | * 1 = rate upto 1.152 Mbit/s | |
253 | * - Only 760 | |
254 | */ | |
255 | ||
256 | /* EFR register bits */ | |
257 | #define SC16IS7XX_EFR_AUTORTS_BIT (1 << 6) /* Auto RTS flow ctrl enable */ | |
258 | #define SC16IS7XX_EFR_AUTOCTS_BIT (1 << 7) /* Auto CTS flow ctrl enable */ | |
259 | #define SC16IS7XX_EFR_XOFF2_DETECT_BIT (1 << 5) /* Enable Xoff2 detection */ | |
260 | #define SC16IS7XX_EFR_ENABLE_BIT (1 << 4) /* Enable enhanced functions | |
261 | * and writing to IER[7:4], | |
262 | * FCR[5:4], MCR[7:5] | |
263 | */ | |
264 | #define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */ | |
265 | #define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2 | |
266 | * | |
267 | * SWFLOW bits 3 & 2 table: | |
268 | * 00 -> no transmitter flow | |
269 | * control | |
270 | * 01 -> transmitter generates | |
271 | * XON2 and XOFF2 | |
272 | * 10 -> transmitter generates | |
273 | * XON1 and XOFF1 | |
274 | * 11 -> transmitter generates | |
275 | * XON1, XON2, XOFF1 and | |
276 | * XOFF2 | |
277 | */ | |
278 | #define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */ | |
279 | #define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3 | |
280 | * | |
281 | * SWFLOW bits 3 & 2 table: | |
282 | * 00 -> no received flow | |
283 | * control | |
284 | * 01 -> receiver compares | |
285 | * XON2 and XOFF2 | |
286 | * 10 -> receiver compares | |
287 | * XON1 and XOFF1 | |
288 | * 11 -> receiver compares | |
289 | * XON1, XON2, XOFF1 and | |
290 | * XOFF2 | |
291 | */ | |
292 | ||
293 | /* Misc definitions */ | |
294 | #define SC16IS7XX_FIFO_SIZE (64) | |
295 | #define SC16IS7XX_REG_SHIFT 2 | |
296 | ||
297 | struct sc16is7xx_devtype { | |
298 | char name[10]; | |
299 | int nr_gpio; | |
300 | int nr_uart; | |
301 | }; | |
302 | ||
303 | struct sc16is7xx_one { | |
304 | struct uart_port port; | |
305 | struct work_struct tx_work; | |
306 | struct work_struct md_work; | |
dfeae619 JR |
307 | }; |
308 | ||
309 | struct sc16is7xx_port { | |
310 | struct uart_driver uart; | |
311 | struct sc16is7xx_devtype *devtype; | |
312 | struct regmap *regmap; | |
313 | struct mutex mutex; | |
314 | struct clk *clk; | |
315 | #ifdef CONFIG_GPIOLIB | |
316 | struct gpio_chip gpio; | |
317 | #endif | |
beb04a9f | 318 | unsigned char buf[SC16IS7XX_FIFO_SIZE]; |
dfeae619 JR |
319 | struct sc16is7xx_one p[0]; |
320 | }; | |
321 | ||
322 | #define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) | |
323 | ||
324 | static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) | |
325 | { | |
326 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
327 | unsigned int val = 0; | |
328 | ||
329 | regmap_read(s->regmap, | |
330 | (reg << SC16IS7XX_REG_SHIFT) | port->line, &val); | |
331 | ||
332 | return val; | |
333 | } | |
334 | ||
335 | static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val) | |
336 | { | |
337 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
338 | ||
339 | regmap_write(s->regmap, | |
340 | (reg << SC16IS7XX_REG_SHIFT) | port->line, val); | |
341 | } | |
342 | ||
343 | static void sc16is7xx_port_update(struct uart_port *port, u8 reg, | |
344 | u8 mask, u8 val) | |
345 | { | |
346 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
347 | ||
348 | regmap_update_bits(s->regmap, | |
349 | (reg << SC16IS7XX_REG_SHIFT) | port->line, | |
350 | mask, val); | |
351 | } | |
352 | ||
353 | ||
354 | static void sc16is7xx_power(struct uart_port *port, int on) | |
355 | { | |
356 | sc16is7xx_port_update(port, SC16IS7XX_IER_REG, | |
357 | SC16IS7XX_IER_SLEEP_BIT, | |
358 | on ? 0 : SC16IS7XX_IER_SLEEP_BIT); | |
359 | } | |
360 | ||
361 | static const struct sc16is7xx_devtype sc16is74x_devtype = { | |
362 | .name = "SC16IS74X", | |
363 | .nr_gpio = 0, | |
364 | .nr_uart = 1, | |
365 | }; | |
366 | ||
367 | static const struct sc16is7xx_devtype sc16is750_devtype = { | |
368 | .name = "SC16IS750", | |
369 | .nr_gpio = 8, | |
370 | .nr_uart = 1, | |
371 | }; | |
372 | ||
373 | static const struct sc16is7xx_devtype sc16is752_devtype = { | |
374 | .name = "SC16IS752", | |
375 | .nr_gpio = 8, | |
376 | .nr_uart = 2, | |
377 | }; | |
378 | ||
379 | static const struct sc16is7xx_devtype sc16is760_devtype = { | |
380 | .name = "SC16IS760", | |
381 | .nr_gpio = 8, | |
382 | .nr_uart = 1, | |
383 | }; | |
384 | ||
385 | static const struct sc16is7xx_devtype sc16is762_devtype = { | |
386 | .name = "SC16IS762", | |
387 | .nr_gpio = 8, | |
388 | .nr_uart = 2, | |
389 | }; | |
390 | ||
391 | static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) | |
392 | { | |
393 | switch (reg >> SC16IS7XX_REG_SHIFT) { | |
394 | case SC16IS7XX_RHR_REG: | |
395 | case SC16IS7XX_IIR_REG: | |
396 | case SC16IS7XX_LSR_REG: | |
397 | case SC16IS7XX_MSR_REG: | |
398 | case SC16IS7XX_TXLVL_REG: | |
399 | case SC16IS7XX_RXLVL_REG: | |
400 | case SC16IS7XX_IOSTATE_REG: | |
401 | return true; | |
402 | default: | |
403 | break; | |
404 | } | |
405 | ||
406 | return false; | |
407 | } | |
408 | ||
409 | static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) | |
410 | { | |
411 | switch (reg >> SC16IS7XX_REG_SHIFT) { | |
412 | case SC16IS7XX_RHR_REG: | |
413 | return true; | |
414 | default: | |
415 | break; | |
416 | } | |
417 | ||
418 | return false; | |
419 | } | |
420 | ||
421 | static int sc16is7xx_set_baud(struct uart_port *port, int baud) | |
422 | { | |
423 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
424 | u8 lcr; | |
425 | u8 prescaler = 0; | |
426 | unsigned long clk = port->uartclk, div = clk / 16 / baud; | |
427 | ||
428 | if (div > 0xffff) { | |
429 | prescaler = SC16IS7XX_MCR_CLKSEL_BIT; | |
430 | div /= 4; | |
431 | } | |
432 | ||
433 | lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); | |
434 | ||
435 | /* Open the LCR divisors for configuration */ | |
436 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, | |
437 | SC16IS7XX_LCR_CONF_MODE_B); | |
438 | ||
439 | /* Enable enhanced features */ | |
440 | regcache_cache_bypass(s->regmap, true); | |
441 | sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, | |
442 | SC16IS7XX_EFR_ENABLE_BIT); | |
443 | regcache_cache_bypass(s->regmap, false); | |
444 | ||
445 | /* Put LCR back to the normal mode */ | |
446 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); | |
447 | ||
448 | sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, | |
449 | SC16IS7XX_MCR_CLKSEL_BIT, | |
450 | prescaler); | |
451 | ||
452 | /* Open the LCR divisors for configuration */ | |
453 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, | |
454 | SC16IS7XX_LCR_CONF_MODE_A); | |
455 | ||
456 | /* Write the new divisor */ | |
457 | regcache_cache_bypass(s->regmap, true); | |
458 | sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256); | |
459 | sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256); | |
460 | regcache_cache_bypass(s->regmap, false); | |
461 | ||
462 | /* Put LCR back to the normal mode */ | |
463 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); | |
464 | ||
465 | return DIV_ROUND_CLOSEST(clk / 16, div); | |
466 | } | |
467 | ||
468 | static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, | |
469 | unsigned int iir) | |
470 | { | |
471 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
472 | unsigned int lsr = 0, ch, flag, bytes_read, i; | |
dfeae619 JR |
473 | bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false; |
474 | ||
beb04a9f | 475 | if (unlikely(rxlen >= sizeof(s->buf))) { |
dfeae619 JR |
476 | dev_warn_ratelimited(port->dev, |
477 | "Port %i: Possible RX FIFO overrun: %d\n", | |
478 | port->line, rxlen); | |
479 | port->icount.buf_overrun++; | |
480 | /* Ensure sanity of RX level */ | |
beb04a9f | 481 | rxlen = sizeof(s->buf); |
dfeae619 JR |
482 | } |
483 | ||
484 | while (rxlen) { | |
485 | /* Only read lsr if there are possible errors in FIFO */ | |
486 | if (read_lsr) { | |
487 | lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); | |
488 | if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT)) | |
489 | read_lsr = false; /* No errors left in FIFO */ | |
490 | } else | |
491 | lsr = 0; | |
492 | ||
493 | if (read_lsr) { | |
beb04a9f | 494 | s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); |
dfeae619 JR |
495 | bytes_read = 1; |
496 | } else { | |
497 | regcache_cache_bypass(s->regmap, true); | |
498 | regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG, | |
beb04a9f | 499 | s->buf, rxlen); |
dfeae619 JR |
500 | regcache_cache_bypass(s->regmap, false); |
501 | bytes_read = rxlen; | |
502 | } | |
503 | ||
504 | lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK; | |
505 | ||
506 | port->icount.rx++; | |
507 | flag = TTY_NORMAL; | |
508 | ||
509 | if (unlikely(lsr)) { | |
510 | if (lsr & SC16IS7XX_LSR_BI_BIT) { | |
511 | port->icount.brk++; | |
512 | if (uart_handle_break(port)) | |
513 | continue; | |
514 | } else if (lsr & SC16IS7XX_LSR_PE_BIT) | |
515 | port->icount.parity++; | |
516 | else if (lsr & SC16IS7XX_LSR_FE_BIT) | |
517 | port->icount.frame++; | |
518 | else if (lsr & SC16IS7XX_LSR_OE_BIT) | |
519 | port->icount.overrun++; | |
520 | ||
521 | lsr &= port->read_status_mask; | |
522 | if (lsr & SC16IS7XX_LSR_BI_BIT) | |
523 | flag = TTY_BREAK; | |
524 | else if (lsr & SC16IS7XX_LSR_PE_BIT) | |
525 | flag = TTY_PARITY; | |
526 | else if (lsr & SC16IS7XX_LSR_FE_BIT) | |
527 | flag = TTY_FRAME; | |
528 | else if (lsr & SC16IS7XX_LSR_OE_BIT) | |
529 | flag = TTY_OVERRUN; | |
530 | } | |
531 | ||
532 | for (i = 0; i < bytes_read; ++i) { | |
beb04a9f | 533 | ch = s->buf[i]; |
dfeae619 JR |
534 | if (uart_handle_sysrq_char(port, ch)) |
535 | continue; | |
536 | ||
537 | if (lsr & port->ignore_status_mask) | |
538 | continue; | |
539 | ||
540 | uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch, | |
541 | flag); | |
542 | } | |
543 | rxlen -= bytes_read; | |
544 | } | |
545 | ||
546 | tty_flip_buffer_push(&port->state->port); | |
547 | } | |
548 | ||
549 | static void sc16is7xx_handle_tx(struct uart_port *port) | |
550 | { | |
551 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
552 | struct circ_buf *xmit = &port->state->xmit; | |
553 | unsigned int txlen, to_send, i; | |
dfeae619 JR |
554 | |
555 | if (unlikely(port->x_char)) { | |
556 | sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); | |
557 | port->icount.tx++; | |
558 | port->x_char = 0; | |
559 | return; | |
560 | } | |
561 | ||
562 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) | |
563 | return; | |
564 | ||
565 | /* Get length of data pending in circular buffer */ | |
566 | to_send = uart_circ_chars_pending(xmit); | |
567 | if (likely(to_send)) { | |
568 | /* Limit to size of TX FIFO */ | |
569 | txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); | |
570 | to_send = (to_send > txlen) ? txlen : to_send; | |
571 | ||
572 | /* Add data to send */ | |
573 | port->icount.tx += to_send; | |
574 | ||
575 | /* Convert to linear buffer */ | |
576 | for (i = 0; i < to_send; ++i) { | |
beb04a9f | 577 | s->buf[i] = xmit->buf[xmit->tail]; |
dfeae619 JR |
578 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
579 | } | |
580 | regcache_cache_bypass(s->regmap, true); | |
beb04a9f | 581 | regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send); |
dfeae619 JR |
582 | regcache_cache_bypass(s->regmap, false); |
583 | } | |
584 | ||
585 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
586 | uart_write_wakeup(port); | |
587 | } | |
588 | ||
589 | static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) | |
590 | { | |
591 | struct uart_port *port = &s->p[portno].port; | |
592 | ||
593 | do { | |
594 | unsigned int iir, msr, rxlen; | |
595 | ||
596 | iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); | |
597 | if (iir & SC16IS7XX_IIR_NO_INT_BIT) | |
598 | break; | |
599 | ||
600 | iir &= SC16IS7XX_IIR_ID_MASK; | |
601 | ||
602 | switch (iir) { | |
603 | case SC16IS7XX_IIR_RDI_SRC: | |
604 | case SC16IS7XX_IIR_RLSE_SRC: | |
605 | case SC16IS7XX_IIR_RTOI_SRC: | |
606 | case SC16IS7XX_IIR_XOFFI_SRC: | |
607 | rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); | |
608 | if (rxlen) | |
609 | sc16is7xx_handle_rx(port, rxlen, iir); | |
610 | break; | |
611 | ||
612 | case SC16IS7XX_IIR_CTSRTS_SRC: | |
613 | msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG); | |
614 | uart_handle_cts_change(port, | |
615 | !!(msr & SC16IS7XX_MSR_CTS_BIT)); | |
616 | break; | |
617 | case SC16IS7XX_IIR_THRI_SRC: | |
618 | mutex_lock(&s->mutex); | |
619 | sc16is7xx_handle_tx(port); | |
620 | mutex_unlock(&s->mutex); | |
621 | break; | |
622 | default: | |
623 | dev_err_ratelimited(port->dev, | |
624 | "Port %i: Unexpected interrupt: %x", | |
625 | port->line, iir); | |
626 | break; | |
627 | } | |
628 | } while (1); | |
629 | } | |
630 | ||
631 | static irqreturn_t sc16is7xx_ist(int irq, void *dev_id) | |
632 | { | |
633 | struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; | |
634 | int i; | |
635 | ||
636 | for (i = 0; i < s->uart.nr; ++i) | |
637 | sc16is7xx_port_irq(s, i); | |
638 | ||
639 | return IRQ_HANDLED; | |
640 | } | |
641 | ||
642 | static void sc16is7xx_wq_proc(struct work_struct *ws) | |
643 | { | |
644 | struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work); | |
645 | struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev); | |
646 | ||
647 | mutex_lock(&s->mutex); | |
648 | sc16is7xx_handle_tx(&one->port); | |
649 | mutex_unlock(&s->mutex); | |
650 | } | |
651 | ||
652 | static void sc16is7xx_stop_tx(struct uart_port* port) | |
653 | { | |
654 | struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); | |
655 | struct circ_buf *xmit = &one->port.state->xmit; | |
656 | ||
657 | /* handle rs485 */ | |
b57d15fe | 658 | if (port->rs485.flags & SER_RS485_ENABLED) { |
dfeae619 JR |
659 | /* do nothing if current tx not yet completed */ |
660 | int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); | |
661 | if (!(lsr & SC16IS7XX_LSR_TEMT_BIT)) | |
662 | return; | |
663 | ||
664 | if (uart_circ_empty(xmit) && | |
b57d15fe RRD |
665 | (port->rs485.delay_rts_after_send > 0)) |
666 | mdelay(port->rs485.delay_rts_after_send); | |
dfeae619 JR |
667 | } |
668 | ||
669 | sc16is7xx_port_update(port, SC16IS7XX_IER_REG, | |
670 | SC16IS7XX_IER_THRI_BIT, | |
671 | 0); | |
672 | } | |
673 | ||
674 | static void sc16is7xx_stop_rx(struct uart_port* port) | |
675 | { | |
676 | struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); | |
677 | ||
678 | one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT; | |
679 | sc16is7xx_port_update(port, SC16IS7XX_IER_REG, | |
680 | SC16IS7XX_LSR_DR_BIT, | |
681 | 0); | |
682 | } | |
683 | ||
684 | static void sc16is7xx_start_tx(struct uart_port *port) | |
685 | { | |
686 | struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); | |
687 | ||
688 | /* handle rs485 */ | |
b57d15fe RRD |
689 | if ((port->rs485.flags & SER_RS485_ENABLED) && |
690 | (port->rs485.delay_rts_before_send > 0)) { | |
691 | mdelay(port->rs485.delay_rts_before_send); | |
dfeae619 JR |
692 | } |
693 | ||
694 | if (!work_pending(&one->tx_work)) | |
695 | schedule_work(&one->tx_work); | |
696 | } | |
697 | ||
698 | static unsigned int sc16is7xx_tx_empty(struct uart_port *port) | |
699 | { | |
700 | unsigned int lvl, lsr; | |
701 | ||
702 | lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); | |
703 | lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); | |
704 | ||
705 | return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0; | |
706 | } | |
707 | ||
708 | static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) | |
709 | { | |
710 | /* DCD and DSR are not wired and CTS/RTS is handled automatically | |
711 | * so just indicate DSR and CAR asserted | |
712 | */ | |
713 | return TIOCM_DSR | TIOCM_CAR; | |
714 | } | |
715 | ||
716 | static void sc16is7xx_md_proc(struct work_struct *ws) | |
717 | { | |
718 | struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work); | |
719 | ||
720 | sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, | |
721 | SC16IS7XX_MCR_LOOP_BIT, | |
722 | (one->port.mctrl & TIOCM_LOOP) ? | |
723 | SC16IS7XX_MCR_LOOP_BIT : 0); | |
724 | } | |
725 | ||
726 | static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
727 | { | |
728 | struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); | |
729 | ||
730 | schedule_work(&one->md_work); | |
731 | } | |
732 | ||
733 | static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) | |
734 | { | |
735 | sc16is7xx_port_update(port, SC16IS7XX_LCR_REG, | |
736 | SC16IS7XX_LCR_TXBREAK_BIT, | |
737 | break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0); | |
738 | } | |
739 | ||
740 | static void sc16is7xx_set_termios(struct uart_port *port, | |
741 | struct ktermios *termios, | |
742 | struct ktermios *old) | |
743 | { | |
744 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
745 | unsigned int lcr, flow = 0; | |
746 | int baud; | |
747 | ||
748 | /* Mask termios capabilities we don't support */ | |
749 | termios->c_cflag &= ~CMSPAR; | |
750 | ||
751 | /* Word size */ | |
752 | switch (termios->c_cflag & CSIZE) { | |
753 | case CS5: | |
754 | lcr = SC16IS7XX_LCR_WORD_LEN_5; | |
755 | break; | |
756 | case CS6: | |
757 | lcr = SC16IS7XX_LCR_WORD_LEN_6; | |
758 | break; | |
759 | case CS7: | |
760 | lcr = SC16IS7XX_LCR_WORD_LEN_7; | |
761 | break; | |
762 | case CS8: | |
763 | lcr = SC16IS7XX_LCR_WORD_LEN_8; | |
764 | break; | |
765 | default: | |
766 | lcr = SC16IS7XX_LCR_WORD_LEN_8; | |
767 | termios->c_cflag &= ~CSIZE; | |
768 | termios->c_cflag |= CS8; | |
769 | break; | |
770 | } | |
771 | ||
772 | /* Parity */ | |
773 | if (termios->c_cflag & PARENB) { | |
774 | lcr |= SC16IS7XX_LCR_PARITY_BIT; | |
775 | if (!(termios->c_cflag & PARODD)) | |
776 | lcr |= SC16IS7XX_LCR_EVENPARITY_BIT; | |
777 | } | |
778 | ||
779 | /* Stop bits */ | |
780 | if (termios->c_cflag & CSTOPB) | |
781 | lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */ | |
782 | ||
783 | /* Set read status mask */ | |
784 | port->read_status_mask = SC16IS7XX_LSR_OE_BIT; | |
785 | if (termios->c_iflag & INPCK) | |
786 | port->read_status_mask |= SC16IS7XX_LSR_PE_BIT | | |
787 | SC16IS7XX_LSR_FE_BIT; | |
788 | if (termios->c_iflag & (BRKINT | PARMRK)) | |
789 | port->read_status_mask |= SC16IS7XX_LSR_BI_BIT; | |
790 | ||
791 | /* Set status ignore mask */ | |
792 | port->ignore_status_mask = 0; | |
793 | if (termios->c_iflag & IGNBRK) | |
794 | port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT; | |
795 | if (!(termios->c_cflag & CREAD)) | |
796 | port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; | |
797 | ||
798 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, | |
799 | SC16IS7XX_LCR_CONF_MODE_B); | |
800 | ||
801 | /* Configure flow control */ | |
802 | regcache_cache_bypass(s->regmap, true); | |
803 | sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); | |
804 | sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); | |
805 | if (termios->c_cflag & CRTSCTS) | |
806 | flow |= SC16IS7XX_EFR_AUTOCTS_BIT | | |
807 | SC16IS7XX_EFR_AUTORTS_BIT; | |
808 | if (termios->c_iflag & IXON) | |
809 | flow |= SC16IS7XX_EFR_SWFLOW3_BIT; | |
810 | if (termios->c_iflag & IXOFF) | |
811 | flow |= SC16IS7XX_EFR_SWFLOW1_BIT; | |
812 | ||
813 | sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow); | |
814 | regcache_cache_bypass(s->regmap, false); | |
815 | ||
816 | /* Update LCR register */ | |
817 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); | |
818 | ||
819 | /* Get baud rate generator configuration */ | |
820 | baud = uart_get_baud_rate(port, termios, old, | |
821 | port->uartclk / 16 / 4 / 0xffff, | |
822 | port->uartclk / 16); | |
823 | ||
824 | /* Setup baudrate generator */ | |
825 | baud = sc16is7xx_set_baud(port, baud); | |
826 | ||
827 | /* Update timeout according to new baud rate */ | |
828 | uart_update_timeout(port, termios->c_cflag, baud); | |
829 | } | |
830 | ||
b57d15fe | 831 | static int sc16is7xx_config_rs485(struct uart_port *port, |
dfeae619 JR |
832 | struct serial_rs485 *rs485) |
833 | { | |
b57d15fe | 834 | if (port->rs485.flags & SER_RS485_ENABLED) |
dfeae619 JR |
835 | sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, |
836 | SC16IS7XX_EFCR_AUTO_RS485_BIT, | |
837 | SC16IS7XX_EFCR_AUTO_RS485_BIT); | |
b57d15fe | 838 | else |
dfeae619 JR |
839 | sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, |
840 | SC16IS7XX_EFCR_AUTO_RS485_BIT, | |
841 | 0); | |
b57d15fe | 842 | port->rs485 = *rs485; |
dfeae619 | 843 | |
b57d15fe | 844 | return 0; |
dfeae619 JR |
845 | } |
846 | ||
847 | static int sc16is7xx_startup(struct uart_port *port) | |
848 | { | |
849 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
850 | unsigned int val; | |
851 | ||
852 | sc16is7xx_power(port, 1); | |
853 | ||
854 | /* Reset FIFOs*/ | |
855 | val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT; | |
856 | sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val); | |
857 | udelay(5); | |
858 | sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, | |
859 | SC16IS7XX_FCR_FIFO_BIT); | |
860 | ||
861 | /* Enable EFR */ | |
862 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, | |
863 | SC16IS7XX_LCR_CONF_MODE_B); | |
864 | ||
865 | regcache_cache_bypass(s->regmap, true); | |
866 | ||
867 | /* Enable write access to enhanced features and internal clock div */ | |
868 | sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, | |
869 | SC16IS7XX_EFR_ENABLE_BIT); | |
870 | ||
871 | /* Enable TCR/TLR */ | |
872 | sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, | |
873 | SC16IS7XX_MCR_TCRTLR_BIT, | |
874 | SC16IS7XX_MCR_TCRTLR_BIT); | |
875 | ||
876 | /* Configure flow control levels */ | |
877 | /* Flow control halt level 48, resume level 24 */ | |
878 | sc16is7xx_port_write(port, SC16IS7XX_TCR_REG, | |
879 | SC16IS7XX_TCR_RX_RESUME(24) | | |
880 | SC16IS7XX_TCR_RX_HALT(48)); | |
881 | ||
882 | regcache_cache_bypass(s->regmap, false); | |
883 | ||
884 | /* Now, initialize the UART */ | |
885 | sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8); | |
886 | ||
887 | /* Enable the Rx and Tx FIFO */ | |
888 | sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, | |
889 | SC16IS7XX_EFCR_RXDISABLE_BIT | | |
890 | SC16IS7XX_EFCR_TXDISABLE_BIT, | |
891 | 0); | |
892 | ||
893 | /* Enable RX, TX, CTS change interrupts */ | |
894 | val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT | | |
895 | SC16IS7XX_IER_CTSI_BIT; | |
896 | sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); | |
897 | ||
898 | return 0; | |
899 | } | |
900 | ||
901 | static void sc16is7xx_shutdown(struct uart_port *port) | |
902 | { | |
903 | /* Disable all interrupts */ | |
904 | sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); | |
905 | /* Disable TX/RX */ | |
906 | sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG, | |
907 | SC16IS7XX_EFCR_RXDISABLE_BIT | | |
908 | SC16IS7XX_EFCR_TXDISABLE_BIT); | |
909 | ||
910 | sc16is7xx_power(port, 0); | |
911 | } | |
912 | ||
913 | static const char *sc16is7xx_type(struct uart_port *port) | |
914 | { | |
915 | struct sc16is7xx_port *s = dev_get_drvdata(port->dev); | |
916 | ||
917 | return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL; | |
918 | } | |
919 | ||
920 | static int sc16is7xx_request_port(struct uart_port *port) | |
921 | { | |
922 | /* Do nothing */ | |
923 | return 0; | |
924 | } | |
925 | ||
926 | static void sc16is7xx_config_port(struct uart_port *port, int flags) | |
927 | { | |
928 | if (flags & UART_CONFIG_TYPE) | |
929 | port->type = PORT_SC16IS7XX; | |
930 | } | |
931 | ||
932 | static int sc16is7xx_verify_port(struct uart_port *port, | |
933 | struct serial_struct *s) | |
934 | { | |
935 | if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX)) | |
936 | return -EINVAL; | |
937 | if (s->irq != port->irq) | |
938 | return -EINVAL; | |
939 | ||
940 | return 0; | |
941 | } | |
942 | ||
943 | static void sc16is7xx_pm(struct uart_port *port, unsigned int state, | |
944 | unsigned int oldstate) | |
945 | { | |
946 | sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0); | |
947 | } | |
948 | ||
949 | static void sc16is7xx_null_void(struct uart_port *port) | |
950 | { | |
951 | /* Do nothing */ | |
952 | } | |
953 | ||
954 | static const struct uart_ops sc16is7xx_ops = { | |
955 | .tx_empty = sc16is7xx_tx_empty, | |
956 | .set_mctrl = sc16is7xx_set_mctrl, | |
957 | .get_mctrl = sc16is7xx_get_mctrl, | |
958 | .stop_tx = sc16is7xx_stop_tx, | |
959 | .start_tx = sc16is7xx_start_tx, | |
960 | .stop_rx = sc16is7xx_stop_rx, | |
dfeae619 JR |
961 | .break_ctl = sc16is7xx_break_ctl, |
962 | .startup = sc16is7xx_startup, | |
963 | .shutdown = sc16is7xx_shutdown, | |
964 | .set_termios = sc16is7xx_set_termios, | |
965 | .type = sc16is7xx_type, | |
966 | .request_port = sc16is7xx_request_port, | |
967 | .release_port = sc16is7xx_null_void, | |
968 | .config_port = sc16is7xx_config_port, | |
969 | .verify_port = sc16is7xx_verify_port, | |
dfeae619 JR |
970 | .pm = sc16is7xx_pm, |
971 | }; | |
972 | ||
973 | #ifdef CONFIG_GPIOLIB | |
974 | static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset) | |
975 | { | |
976 | unsigned int val; | |
977 | struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, | |
978 | gpio); | |
979 | struct uart_port *port = &s->p[0].port; | |
980 | ||
981 | val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); | |
982 | ||
983 | return !!(val & BIT(offset)); | |
984 | } | |
985 | ||
986 | static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) | |
987 | { | |
988 | struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, | |
989 | gpio); | |
990 | struct uart_port *port = &s->p[0].port; | |
991 | ||
992 | sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), | |
993 | val ? BIT(offset) : 0); | |
994 | } | |
995 | ||
996 | static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip, | |
997 | unsigned offset) | |
998 | { | |
999 | struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, | |
1000 | gpio); | |
1001 | struct uart_port *port = &s->p[0].port; | |
1002 | ||
1003 | sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0); | |
1004 | ||
1005 | return 0; | |
1006 | } | |
1007 | ||
1008 | static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, | |
1009 | unsigned offset, int val) | |
1010 | { | |
1011 | struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, | |
1012 | gpio); | |
1013 | struct uart_port *port = &s->p[0].port; | |
1014 | ||
1015 | sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), | |
1016 | val ? BIT(offset) : 0); | |
1017 | sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), | |
1018 | BIT(offset)); | |
1019 | ||
1020 | return 0; | |
1021 | } | |
1022 | #endif | |
1023 | ||
1024 | static int sc16is7xx_probe(struct device *dev, | |
1025 | struct sc16is7xx_devtype *devtype, | |
1026 | struct regmap *regmap, int irq, unsigned long flags) | |
1027 | { | |
1028 | unsigned long freq, *pfreq = dev_get_platdata(dev); | |
dfeae619 JR |
1029 | int i, ret; |
1030 | struct sc16is7xx_port *s; | |
1031 | ||
1032 | if (IS_ERR(regmap)) | |
1033 | return PTR_ERR(regmap); | |
1034 | ||
1035 | /* Alloc port structure */ | |
1036 | s = devm_kzalloc(dev, sizeof(*s) + | |
1037 | sizeof(struct sc16is7xx_one) * devtype->nr_uart, | |
1038 | GFP_KERNEL); | |
1039 | if (!s) { | |
1040 | dev_err(dev, "Error allocating port structure\n"); | |
1041 | return -ENOMEM; | |
1042 | } | |
1043 | ||
dc824ebe JR |
1044 | s->clk = devm_clk_get(dev, NULL); |
1045 | if (IS_ERR(s->clk)) { | |
dfeae619 JR |
1046 | if (pfreq) |
1047 | freq = *pfreq; | |
1048 | else | |
dc824ebe | 1049 | return PTR_ERR(s->clk); |
dfeae619 | 1050 | } else { |
dc824ebe | 1051 | freq = clk_get_rate(s->clk); |
dfeae619 JR |
1052 | } |
1053 | ||
1054 | s->regmap = regmap; | |
1055 | s->devtype = devtype; | |
1056 | dev_set_drvdata(dev, s); | |
1057 | ||
1058 | /* Register UART driver */ | |
1059 | s->uart.owner = THIS_MODULE; | |
1060 | s->uart.dev_name = "ttySC"; | |
1061 | s->uart.nr = devtype->nr_uart; | |
1062 | ret = uart_register_driver(&s->uart); | |
1063 | if (ret) { | |
1064 | dev_err(dev, "Registering UART driver failed\n"); | |
1065 | goto out_clk; | |
1066 | } | |
1067 | ||
1068 | #ifdef CONFIG_GPIOLIB | |
1069 | if (devtype->nr_gpio) { | |
1070 | /* Setup GPIO cotroller */ | |
1071 | s->gpio.owner = THIS_MODULE; | |
1072 | s->gpio.dev = dev; | |
1073 | s->gpio.label = dev_name(dev); | |
1074 | s->gpio.direction_input = sc16is7xx_gpio_direction_input; | |
1075 | s->gpio.get = sc16is7xx_gpio_get; | |
1076 | s->gpio.direction_output = sc16is7xx_gpio_direction_output; | |
1077 | s->gpio.set = sc16is7xx_gpio_set; | |
1078 | s->gpio.base = -1; | |
1079 | s->gpio.ngpio = devtype->nr_gpio; | |
1080 | s->gpio.can_sleep = 1; | |
1081 | ret = gpiochip_add(&s->gpio); | |
1082 | if (ret) | |
1083 | goto out_uart; | |
1084 | } | |
1085 | #endif | |
1086 | ||
1087 | mutex_init(&s->mutex); | |
1088 | ||
1089 | for (i = 0; i < devtype->nr_uart; ++i) { | |
1090 | /* Initialize port data */ | |
1091 | s->p[i].port.line = i; | |
1092 | s->p[i].port.dev = dev; | |
1093 | s->p[i].port.irq = irq; | |
1094 | s->p[i].port.type = PORT_SC16IS7XX; | |
1095 | s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; | |
1096 | s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; | |
1097 | s->p[i].port.iotype = UPIO_PORT; | |
1098 | s->p[i].port.uartclk = freq; | |
b57d15fe | 1099 | s->p[i].port.rs485_config = sc16is7xx_config_rs485; |
dfeae619 JR |
1100 | s->p[i].port.ops = &sc16is7xx_ops; |
1101 | /* Disable all interrupts */ | |
1102 | sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); | |
1103 | /* Disable TX/RX */ | |
1104 | sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, | |
1105 | SC16IS7XX_EFCR_RXDISABLE_BIT | | |
1106 | SC16IS7XX_EFCR_TXDISABLE_BIT); | |
1107 | /* Initialize queue for start TX */ | |
1108 | INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc); | |
1109 | /* Initialize queue for changing mode */ | |
1110 | INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc); | |
1111 | /* Register port */ | |
1112 | uart_add_one_port(&s->uart, &s->p[i].port); | |
1113 | /* Go to suspend mode */ | |
1114 | sc16is7xx_power(&s->p[i].port, 0); | |
1115 | } | |
1116 | ||
1117 | /* Setup interrupt */ | |
1118 | ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist, | |
1119 | IRQF_ONESHOT | flags, dev_name(dev), s); | |
1120 | if (!ret) | |
1121 | return 0; | |
1122 | ||
1123 | mutex_destroy(&s->mutex); | |
1124 | ||
1125 | #ifdef CONFIG_GPIOLIB | |
1126 | if (devtype->nr_gpio) | |
e27e2786 | 1127 | gpiochip_remove(&s->gpio); |
dfeae619 JR |
1128 | |
1129 | out_uart: | |
1130 | #endif | |
1131 | uart_unregister_driver(&s->uart); | |
1132 | ||
1133 | out_clk: | |
1134 | if (!IS_ERR(s->clk)) | |
1135 | clk_disable_unprepare(s->clk); | |
1136 | ||
1137 | return ret; | |
1138 | } | |
1139 | ||
1140 | static int sc16is7xx_remove(struct device *dev) | |
1141 | { | |
1142 | struct sc16is7xx_port *s = dev_get_drvdata(dev); | |
e27e2786 | 1143 | int i; |
dfeae619 JR |
1144 | |
1145 | #ifdef CONFIG_GPIOLIB | |
e27e2786 LW |
1146 | if (s->devtype->nr_gpio) |
1147 | gpiochip_remove(&s->gpio); | |
dfeae619 JR |
1148 | #endif |
1149 | ||
1150 | for (i = 0; i < s->uart.nr; i++) { | |
1151 | cancel_work_sync(&s->p[i].tx_work); | |
1152 | cancel_work_sync(&s->p[i].md_work); | |
1153 | uart_remove_one_port(&s->uart, &s->p[i].port); | |
1154 | sc16is7xx_power(&s->p[i].port, 0); | |
1155 | } | |
1156 | ||
1157 | mutex_destroy(&s->mutex); | |
1158 | uart_unregister_driver(&s->uart); | |
1159 | if (!IS_ERR(s->clk)) | |
1160 | clk_disable_unprepare(s->clk); | |
1161 | ||
e27e2786 | 1162 | return 0; |
dfeae619 JR |
1163 | } |
1164 | ||
1165 | static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { | |
1166 | { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, }, | |
1167 | { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, }, | |
1168 | { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, }, | |
1169 | { .compatible = "nxp,sc16is752", .data = &sc16is752_devtype, }, | |
1170 | { .compatible = "nxp,sc16is760", .data = &sc16is760_devtype, }, | |
1171 | { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, }, | |
1172 | { } | |
1173 | }; | |
1174 | MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids); | |
1175 | ||
1176 | static struct regmap_config regcfg = { | |
1177 | .reg_bits = 7, | |
1178 | .pad_bits = 1, | |
1179 | .val_bits = 8, | |
1180 | .cache_type = REGCACHE_RBTREE, | |
1181 | .volatile_reg = sc16is7xx_regmap_volatile, | |
1182 | .precious_reg = sc16is7xx_regmap_precious, | |
1183 | }; | |
1184 | ||
dfeae619 JR |
1185 | static int sc16is7xx_i2c_probe(struct i2c_client *i2c, |
1186 | const struct i2c_device_id *id) | |
1187 | { | |
1188 | struct sc16is7xx_devtype *devtype; | |
1189 | unsigned long flags = 0; | |
1190 | struct regmap *regmap; | |
1191 | ||
1192 | if (i2c->dev.of_node) { | |
1193 | const struct of_device_id *of_id = | |
1194 | of_match_device(sc16is7xx_dt_ids, &i2c->dev); | |
1195 | ||
1196 | devtype = (struct sc16is7xx_devtype *)of_id->data; | |
1197 | } else { | |
1198 | devtype = (struct sc16is7xx_devtype *)id->driver_data; | |
1199 | flags = IRQF_TRIGGER_FALLING; | |
1200 | } | |
1201 | ||
1202 | regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | | |
1203 | (devtype->nr_uart - 1); | |
1204 | regmap = devm_regmap_init_i2c(i2c, ®cfg); | |
1205 | ||
1206 | return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags); | |
1207 | } | |
1208 | ||
1209 | static int sc16is7xx_i2c_remove(struct i2c_client *client) | |
1210 | { | |
1211 | return sc16is7xx_remove(&client->dev); | |
1212 | } | |
1213 | ||
1214 | static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { | |
1215 | { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, | |
1216 | { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, | |
1217 | { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, | |
1218 | { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, | |
1219 | { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, | |
1220 | { } | |
1221 | }; | |
1222 | MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); | |
1223 | ||
1224 | static struct i2c_driver sc16is7xx_i2c_uart_driver = { | |
1225 | .driver = { | |
1226 | .name = SC16IS7XX_NAME, | |
1227 | .owner = THIS_MODULE, | |
1228 | .of_match_table = of_match_ptr(sc16is7xx_dt_ids), | |
1229 | }, | |
1230 | .probe = sc16is7xx_i2c_probe, | |
1231 | .remove = sc16is7xx_i2c_remove, | |
1232 | .id_table = sc16is7xx_i2c_id_table, | |
1233 | }; | |
1234 | module_i2c_driver(sc16is7xx_i2c_uart_driver); | |
1235 | MODULE_ALIAS("i2c:sc16is7xx"); | |
dfeae619 JR |
1236 | |
1237 | MODULE_LICENSE("GPL"); | |
1238 | MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>"); | |
1239 | MODULE_DESCRIPTION("SC16IS7XX serial driver"); |