]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blame - drivers/tty/serial/stm32-usart.c
projects / mirror_ubuntu-artful-kernel.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
serial: sirf: let uart's receive start in right place
[mirror_ubuntu-artful-kernel.git] / drivers / tty / serial / stm32-usart.c
CommitLineData
48a6092f
MC		 1/*
2 * Copyright (C) Maxime Coquelin 2015
3 * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
4 * License terms: GNU General Public License (GPL), version 2
5 *
6 * Inspired by st-asc.c from STMicroelectronics (c)
7 */
8
9#if defined(CONFIG_SERIAL_STM32_USART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
10#define SUPPORT_SYSRQ
11#endif
12
13#include <linux/module.h>
14#include <linux/serial.h>
15#include <linux/console.h>
16#include <linux/sysrq.h>
17#include <linux/platform_device.h>
18#include <linux/io.h>
19#include <linux/irq.h>
20#include <linux/tty.h>
21#include <linux/tty_flip.h>
22#include <linux/delay.h>
23#include <linux/spinlock.h>
24#include <linux/pm_runtime.h>
25#include <linux/of.h>
26#include <linux/of_platform.h>
27#include <linux/serial_core.h>
28#include <linux/clk.h>
29
30#define DRIVER_NAME "stm32-usart"
31
32/* Register offsets */
33#define USART_SR 0x00
34#define USART_DR 0x04
35#define USART_BRR 0x08
36#define USART_CR1 0x0c
37#define USART_CR2 0x10
38#define USART_CR3 0x14
39#define USART_GTPR 0x18
40
41/* USART_SR */
42#define USART_SR_PE BIT(0)
43#define USART_SR_FE BIT(1)
44#define USART_SR_NF BIT(2)
45#define USART_SR_ORE BIT(3)
46#define USART_SR_IDLE BIT(4)
47#define USART_SR_RXNE BIT(5)
48#define USART_SR_TC BIT(6)
49#define USART_SR_TXE BIT(7)
50#define USART_SR_LBD BIT(8)
51#define USART_SR_CTS BIT(9)
52#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
53 USART_SR_FE | USART_SR_PE)
54/* Dummy bits */
55#define USART_SR_DUMMY_RX BIT(16)
56
57/* USART_DR */
58#define USART_DR_MASK GENMASK(8, 0)
59
60/* USART_BRR */
61#define USART_BRR_DIV_F_MASK GENMASK(3, 0)
62#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
63#define USART_BRR_DIV_M_SHIFT 4
64
65/* USART_CR1 */
66#define USART_CR1_SBK BIT(0)
67#define USART_CR1_RWU BIT(1)
68#define USART_CR1_RE BIT(2)
69#define USART_CR1_TE BIT(3)
70#define USART_CR1_IDLEIE BIT(4)
71#define USART_CR1_RXNEIE BIT(5)
72#define USART_CR1_TCIE BIT(6)
73#define USART_CR1_TXEIE BIT(7)
74#define USART_CR1_PEIE BIT(8)
75#define USART_CR1_PS BIT(9)
76#define USART_CR1_PCE BIT(10)
77#define USART_CR1_WAKE BIT(11)
78#define USART_CR1_M BIT(12)
79#define USART_CR1_UE BIT(13)
80#define USART_CR1_OVER8 BIT(15)
81#define USART_CR1_IE_MASK GENMASK(8, 4)
82
83/* USART_CR2 */
84#define USART_CR2_ADD_MASK GENMASK(3, 0)
85#define USART_CR2_LBDL BIT(5)
86#define USART_CR2_LBDIE BIT(6)
87#define USART_CR2_LBCL BIT(8)
88#define USART_CR2_CPHA BIT(9)
89#define USART_CR2_CPOL BIT(10)
90#define USART_CR2_CLKEN BIT(11)
91#define USART_CR2_STOP_2B BIT(13)
92#define USART_CR2_STOP_MASK GENMASK(13, 12)
93#define USART_CR2_LINEN BIT(14)
94
95/* USART_CR3 */
96#define USART_CR3_EIE BIT(0)
97#define USART_CR3_IREN BIT(1)
98#define USART_CR3_IRLP BIT(2)
99#define USART_CR3_HDSEL BIT(3)
100#define USART_CR3_NACK BIT(4)
101#define USART_CR3_SCEN BIT(5)
102#define USART_CR3_DMAR BIT(6)
103#define USART_CR3_DMAT BIT(7)
104#define USART_CR3_RTSE BIT(8)
105#define USART_CR3_CTSE BIT(9)
106#define USART_CR3_CTSIE BIT(10)
107#define USART_CR3_ONEBIT BIT(11)
108
109/* USART_GTPR */
110#define USART_GTPR_PSC_MASK GENMASK(7, 0)
111#define USART_GTPR_GT_MASK GENMASK(15, 8)
112
113#define DRIVER_NAME "stm32-usart"
114#define STM32_SERIAL_NAME "ttyS"
115#define STM32_MAX_PORTS 6
116
117struct stm32_port {
118 struct uart_port port;
119 struct clk *clk;
120 bool hw_flow_control;
121};
122
123static struct stm32_port stm32_ports[STM32_MAX_PORTS];
124static struct uart_driver stm32_usart_driver;
125
126static void stm32_stop_tx(struct uart_port *port);
127
128static inline struct stm32_port *to_stm32_port(struct uart_port *port)
129{
130 return container_of(port, struct stm32_port, port);
131}
132
133static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits)
134{
135 u32 val;
136
137 val = readl_relaxed(port->membase + reg);
138 val |= bits;
139 writel_relaxed(val, port->membase + reg);
140}
141
142static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
143{
144 u32 val;
145
146 val = readl_relaxed(port->membase + reg);
147 val &= ~bits;
148 writel_relaxed(val, port->membase + reg);
149}
150
151static void stm32_receive_chars(struct uart_port *port)
152{
153 struct tty_port *tport = &port->state->port;
154 unsigned long c;
155 u32 sr;
156 char flag;
157
158 if (port->irq_wake)
159 pm_wakeup_event(tport->tty->dev, 0);
160
161 while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
162 sr |= USART_SR_DUMMY_RX;
163 c = readl_relaxed(port->membase + USART_DR);
164 flag = TTY_NORMAL;
165 port->icount.rx++;
166
167 if (sr & USART_SR_ERR_MASK) {
168 if (sr & USART_SR_LBD) {
169 port->icount.brk++;
170 if (uart_handle_break(port))
171 continue;
172 } else if (sr & USART_SR_ORE) {
173 port->icount.overrun++;
174 } else if (sr & USART_SR_PE) {
175 port->icount.parity++;
176 } else if (sr & USART_SR_FE) {
177 port->icount.frame++;
178 }
179
180 sr &= port->read_status_mask;
181
182 if (sr & USART_SR_LBD)
183 flag = TTY_BREAK;
184 else if (sr & USART_SR_PE)
185 flag = TTY_PARITY;
186 else if (sr & USART_SR_FE)
187 flag = TTY_FRAME;
188 }
189
190 if (uart_handle_sysrq_char(port, c))
191 continue;
192 uart_insert_char(port, sr, USART_SR_ORE, c, flag);
193 }
194
195 spin_unlock(&port->lock);
196 tty_flip_buffer_push(tport);
197 spin_lock(&port->lock);
198}
199
200static void stm32_transmit_chars(struct uart_port *port)
201{
202 struct circ_buf *xmit = &port->state->xmit;
203
204 if (port->x_char) {
205 writel_relaxed(port->x_char, port->membase + USART_DR);
206 port->x_char = 0;
207 port->icount.tx++;
208 return;
209 }
210
211 if (uart_tx_stopped(port)) {
212 stm32_stop_tx(port);
213 return;
214 }
215
216 if (uart_circ_empty(xmit)) {
217 stm32_stop_tx(port);
218 return;
219 }
220
221 writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
222 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
223 port->icount.tx++;
224
225 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
226 uart_write_wakeup(port);
227
228 if (uart_circ_empty(xmit))
229 stm32_stop_tx(port);
230}
231
232static irqreturn_t stm32_interrupt(int irq, void *ptr)
233{
234 struct uart_port *port = ptr;
235 u32 sr;
236
237 spin_lock(&port->lock);
238
239 sr = readl_relaxed(port->membase + USART_SR);
240
241 if (sr & USART_SR_RXNE)
242 stm32_receive_chars(port);
243
244 if (sr & USART_SR_TXE)
245 stm32_transmit_chars(port);
246
247 spin_unlock(&port->lock);
248
249 return IRQ_HANDLED;
250}
251
252static unsigned int stm32_tx_empty(struct uart_port *port)
253{
254 return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
255}
256
257static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
258{
259 if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
260 stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
261 else
262 stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
263}
264
265static unsigned int stm32_get_mctrl(struct uart_port *port)
266{
267 /* This routine is used to get signals of: DCD, DSR, RI, and CTS */
268 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
269}
270
271/* Transmit stop */
272static void stm32_stop_tx(struct uart_port *port)
273{
274 stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
275}
276
277/* There are probably characters waiting to be transmitted. */
278static void stm32_start_tx(struct uart_port *port)
279{
280 struct circ_buf *xmit = &port->state->xmit;
281
282 if (uart_circ_empty(xmit))
283 return;
284
285 stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
286}
287
288/* Throttle the remote when input buffer is about to overflow. */
289static void stm32_throttle(struct uart_port *port)
290{
291 unsigned long flags;
292
293 spin_lock_irqsave(&port->lock, flags);
294 stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
295 spin_unlock_irqrestore(&port->lock, flags);
296}
297
298/* Unthrottle the remote, the input buffer can now accept data. */
299static void stm32_unthrottle(struct uart_port *port)
300{
301 unsigned long flags;
302
303 spin_lock_irqsave(&port->lock, flags);
304 stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
305 spin_unlock_irqrestore(&port->lock, flags);
306}
307
308/* Receive stop */
309static void stm32_stop_rx(struct uart_port *port)
310{
311 stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
312}
313
314/* Handle breaks - ignored by us */
315static void stm32_break_ctl(struct uart_port *port, int break_state)
316{
317}
318
319static int stm32_startup(struct uart_port *port)
320{
321 const char *name = to_platform_device(port->dev)->name;
322 u32 val;
323 int ret;
324
325 ret = request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND,
326 name, port);
327 if (ret)
328 return ret;
329
330 val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
331 stm32_set_bits(port, USART_CR1, val);
332
333 return 0;
334}
335
336static void stm32_shutdown(struct uart_port *port)
337{
338 u32 val;
339
340 val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
341 stm32_set_bits(port, USART_CR1, val);
342
343 free_irq(port->irq, port);
344}
345
346static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
347 struct ktermios *old)
348{
349 struct stm32_port *stm32_port = to_stm32_port(port);
350 unsigned int baud;
351 u32 usartdiv, mantissa, fraction, oversampling;
352 tcflag_t cflag = termios->c_cflag;
353 u32 cr1, cr2, cr3;
354 unsigned long flags;
355
356 if (!stm32_port->hw_flow_control)
357 cflag &= ~CRTSCTS;
358
359 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
360
361 spin_lock_irqsave(&port->lock, flags);
362
363 /* Stop serial port and reset value */
364 writel_relaxed(0, port->membase + USART_CR1);
365
366 cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
367 cr2 = 0;
368 cr3 = 0;
369
370 if (cflag & CSTOPB)
371 cr2 |= USART_CR2_STOP_2B;
372
373 if (cflag & PARENB) {
374 cr1 |= USART_CR1_PCE;
375 if ((cflag & CSIZE) == CS8)
376 cr1 |= USART_CR1_M;
377 }
378
379 if (cflag & PARODD)
380 cr1 |= USART_CR1_PS;
381
382 port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
383 if (cflag & CRTSCTS) {
384 port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
385 cr3 |= USART_CR3_CTSE;
386 }
387
388 usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
389
390 /*
391 * The USART supports 16 or 8 times oversampling.
392 * By default we prefer 16 times oversampling, so that the receiver
393 * has a better tolerance to clock deviations.
394 * 8 times oversampling is only used to achieve higher speeds.
395 */
396 if (usartdiv < 16) {
397 oversampling = 8;
398 stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
399 } else {
400 oversampling = 16;
401 stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
402 }
403
404 mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
405 fraction = usartdiv % oversampling;
406 writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
407
408 uart_update_timeout(port, cflag, baud);
409
410 port->read_status_mask = USART_SR_ORE;
411 if (termios->c_iflag & INPCK)
412 port->read_status_mask |= USART_SR_PE | USART_SR_FE;
413 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
414 port->read_status_mask |= USART_SR_LBD;
415
416 /* Characters to ignore */
417 port->ignore_status_mask = 0;
418 if (termios->c_iflag & IGNPAR)
419 port->ignore_status_mask = USART_SR_PE | USART_SR_FE;
420 if (termios->c_iflag & IGNBRK) {
421 port->ignore_status_mask |= USART_SR_LBD;
422 /*
423 * If we're ignoring parity and break indicators,
424 * ignore overruns too (for real raw support).
425 */
426 if (termios->c_iflag & IGNPAR)
427 port->ignore_status_mask |= USART_SR_ORE;
428 }
429
430 /* Ignore all characters if CREAD is not set */
431 if ((termios->c_cflag & CREAD) == 0)
432 port->ignore_status_mask |= USART_SR_DUMMY_RX;
433
434 writel_relaxed(cr3, port->membase + USART_CR3);
435 writel_relaxed(cr2, port->membase + USART_CR2);
436 writel_relaxed(cr1, port->membase + USART_CR1);
437
438 spin_unlock_irqrestore(&port->lock, flags);
439}
440
441static const char *stm32_type(struct uart_port *port)
442{
443 return (port->type == PORT_STM32) ? DRIVER_NAME : NULL;
444}
445
446static void stm32_release_port(struct uart_port *port)
447{
448}
449
450static int stm32_request_port(struct uart_port *port)
451{
452 return 0;
453}
454
455static void stm32_config_port(struct uart_port *port, int flags)
456{
457 if (flags & UART_CONFIG_TYPE)
458 port->type = PORT_STM32;
459}
460
461static int
462stm32_verify_port(struct uart_port *port, struct serial_struct *ser)
463{
464 /* No user changeable parameters */
465 return -EINVAL;
466}
467
468static void stm32_pm(struct uart_port *port, unsigned int state,
469 unsigned int oldstate)
470{
471 struct stm32_port *stm32port = container_of(port,
472 struct stm32_port, port);
473 unsigned long flags = 0;
474
475 switch (state) {
476 case UART_PM_STATE_ON:
477 clk_prepare_enable(stm32port->clk);
478 break;
479 case UART_PM_STATE_OFF:
480 spin_lock_irqsave(&port->lock, flags);
481 stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
482 spin_unlock_irqrestore(&port->lock, flags);
483 clk_disable_unprepare(stm32port->clk);
484 break;
485 }
486}
487
488static const struct uart_ops stm32_uart_ops = {
489 .tx_empty = stm32_tx_empty,
490 .set_mctrl = stm32_set_mctrl,
491 .get_mctrl = stm32_get_mctrl,
492 .stop_tx = stm32_stop_tx,
493 .start_tx = stm32_start_tx,
494 .throttle = stm32_throttle,
495 .unthrottle = stm32_unthrottle,
496 .stop_rx = stm32_stop_rx,
497 .break_ctl = stm32_break_ctl,
498 .startup = stm32_startup,
499 .shutdown = stm32_shutdown,
500 .set_termios = stm32_set_termios,
501 .pm = stm32_pm,
502 .type = stm32_type,
503 .release_port = stm32_release_port,
504 .request_port = stm32_request_port,
505 .config_port = stm32_config_port,
506 .verify_port = stm32_verify_port,
507};
508
509static int stm32_init_port(struct stm32_port *stm32port,
510 struct platform_device *pdev)
511{
512 struct uart_port *port = &stm32port->port;
513 struct resource *res;
514 int ret;
515
516 port->iotype = UPIO_MEM;
517 port->flags = UPF_BOOT_AUTOCONF;
518 port->ops = &stm32_uart_ops;
519 port->dev = &pdev->dev;
520 port->irq = platform_get_irq(pdev, 0);
521
522 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
523 port->membase = devm_ioremap_resource(&pdev->dev, res);
524 if (IS_ERR(port->membase))
525 return PTR_ERR(port->membase);
526 port->mapbase = res->start;
527
528 spin_lock_init(&port->lock);
529
530 stm32port->clk = devm_clk_get(&pdev->dev, NULL);
531 if (IS_ERR(stm32port->clk))
532 return PTR_ERR(stm32port->clk);
533
534 /* Ensure that clk rate is correct by enabling the clk */
535 ret = clk_prepare_enable(stm32port->clk);
536 if (ret)
537 return ret;
538
539 stm32port->port.uartclk = clk_get_rate(stm32port->clk);
540 if (!stm32port->port.uartclk)
541 ret = -EINVAL;
542
543 clk_disable_unprepare(stm32port->clk);
544
545 return ret;
546}
547
548static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
549{
550 struct device_node *np = pdev->dev.of_node;
551 int id;
552
553 if (!np)
554 return NULL;
555
556 id = of_alias_get_id(np, "serial");
557 if (id < 0)
558 id = 0;
559
560 if (WARN_ON(id >= STM32_MAX_PORTS))
561 return NULL;
562
563 stm32_ports[id].hw_flow_control = of_property_read_bool(np,
564 "auto-flow-control");
565 stm32_ports[id].port.line = id;
566 return &stm32_ports[id];
567}
568
569#ifdef CONFIG_OF
570static const struct of_device_id stm32_match[] = {
571 { .compatible = "st,stm32-usart", },
572 { .compatible = "st,stm32-uart", },
573 {},
574};
575
576MODULE_DEVICE_TABLE(of, stm32_match);
577#endif
578
579static int stm32_serial_probe(struct platform_device *pdev)
580{
581 int ret;
582 struct stm32_port *stm32port;
583
584 stm32port = stm32_of_get_stm32_port(pdev);
585 if (!stm32port)
586 return -ENODEV;
587
588 ret = stm32_init_port(stm32port, pdev);
589 if (ret)
590 return ret;
591
592 ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
593 if (ret)
594 return ret;
595
596 platform_set_drvdata(pdev, &stm32port->port);
597
598 return 0;
599}
600
601static int stm32_serial_remove(struct platform_device *pdev)
602{
603 struct uart_port *port = platform_get_drvdata(pdev);
604
605 return uart_remove_one_port(&stm32_usart_driver, port);
606}
607
608
609#ifdef CONFIG_SERIAL_STM32_CONSOLE
610static void stm32_console_putchar(struct uart_port *port, int ch)
611{
612 while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
613 cpu_relax();
614
615 writel_relaxed(ch, port->membase + USART_DR);
616}
617
618static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
619{
620 struct uart_port *port = &stm32_ports[co->index].port;
621 unsigned long flags;
622 u32 old_cr1, new_cr1;
623 int locked = 1;
624
625 local_irq_save(flags);
626 if (port->sysrq)
627 locked = 0;
628 else if (oops_in_progress)
629 locked = spin_trylock(&port->lock);
630 else
631 spin_lock(&port->lock);
632
633 /* Save and disable interrupts */
634 old_cr1 = readl_relaxed(port->membase + USART_CR1);
635 new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
636 writel_relaxed(new_cr1, port->membase + USART_CR1);
637
638 uart_console_write(port, s, cnt, stm32_console_putchar);
639
640 /* Restore interrupt state */
641 writel_relaxed(old_cr1, port->membase + USART_CR1);
642
643 if (locked)
644 spin_unlock(&port->lock);
645 local_irq_restore(flags);
646}
647
648static int stm32_console_setup(struct console *co, char *options)
649{
650 struct stm32_port *stm32port;
651 int baud = 9600;
652 int bits = 8;
653 int parity = 'n';
654 int flow = 'n';
655
656 if (co->index >= STM32_MAX_PORTS)
657 return -ENODEV;
658
659 stm32port = &stm32_ports[co->index];
660
661 /*
662 * This driver does not support early console initialization
663 * (use ARM early printk support instead), so we only expect
664 * this to be called during the uart port registration when the
665 * driver gets probed and the port should be mapped at that point.
666 */
667 if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL)
668 return -ENXIO;
669
670 if (options)
671 uart_parse_options(options, &baud, &parity, &bits, &flow);
672
673 return uart_set_options(&stm32port->port, co, baud, parity, bits, flow);
674}
675
676static struct console stm32_console = {
677 .name = STM32_SERIAL_NAME,
678 .device = uart_console_device,
679 .write = stm32_console_write,
680 .setup = stm32_console_setup,
681 .flags = CON_PRINTBUFFER,
682 .index = -1,
683 .data = &stm32_usart_driver,
684};
685
686#define STM32_SERIAL_CONSOLE (&stm32_console)
687
688#else
689#define STM32_SERIAL_CONSOLE NULL
690#endif /* CONFIG_SERIAL_STM32_CONSOLE */
691
692static struct uart_driver stm32_usart_driver = {
693 .driver_name = DRIVER_NAME,
694 .dev_name = STM32_SERIAL_NAME,
695 .major = 0,
696 .minor = 0,
697 .nr = STM32_MAX_PORTS,
698 .cons = STM32_SERIAL_CONSOLE,
699};
700
701static struct platform_driver stm32_serial_driver = {
702 .probe = stm32_serial_probe,
703 .remove = stm32_serial_remove,
704 .driver = {
705 .name = DRIVER_NAME,
706 .of_match_table = of_match_ptr(stm32_match),
707 },
708};
709
710static int __init usart_init(void)
711{
712 static char banner[] __initdata = "STM32 USART driver initialized";
713 int ret;
714
715 pr_info("%s\n", banner);
716
717 ret = uart_register_driver(&stm32_usart_driver);
718 if (ret)
719 return ret;
720
721 ret = platform_driver_register(&stm32_serial_driver);
722 if (ret)
723 uart_unregister_driver(&stm32_usart_driver);
724
725 return ret;
726}
727
728static void __exit usart_exit(void)
729{
730 platform_driver_unregister(&stm32_serial_driver);
731 uart_unregister_driver(&stm32_usart_driver);
732}
733
734module_init(usart_init);
735module_exit(usart_exit);
736
737MODULE_ALIAS("platform:" DRIVER_NAME);
738MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver");
739MODULE_LICENSE("GPL v2");
Ubuntu Artful kernel mirror