]>
Commit | Line | Data |
---|---|---|
d87a6d95 | 1 | /* |
1da177e4 LT |
2 | * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI |
3 | * | |
4 | * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) | |
5 | * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) | |
6 | * | |
7 | * This is mainly a variation of 8250.c, credits go to authors mentioned | |
8 | * therein. In fact this driver should be merged into the generic 8250.c | |
9 | * infrastructure perhaps using a 8250_sparc.c module. | |
10 | * | |
11 | * Fixed to use tty_get_baud_rate(). | |
12 | * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 | |
13 | * | |
14 | * Converted to new 2.5.x UART layer. | |
9efc3715 | 15 | * David S. Miller (davem@davemloft.net), 2002-Jul-29 |
1da177e4 LT |
16 | */ |
17 | ||
1da177e4 LT |
18 | #include <linux/module.h> |
19 | #include <linux/kernel.h> | |
1da177e4 LT |
20 | #include <linux/spinlock.h> |
21 | #include <linux/errno.h> | |
22 | #include <linux/tty.h> | |
23 | #include <linux/tty_flip.h> | |
24 | #include <linux/major.h> | |
25 | #include <linux/string.h> | |
26 | #include <linux/ptrace.h> | |
27 | #include <linux/ioport.h> | |
28 | #include <linux/circ_buf.h> | |
29 | #include <linux/serial.h> | |
30 | #include <linux/sysrq.h> | |
31 | #include <linux/console.h> | |
5a0e3ad6 | 32 | #include <linux/slab.h> |
1da177e4 LT |
33 | #ifdef CONFIG_SERIO |
34 | #include <linux/serio.h> | |
35 | #endif | |
36 | #include <linux/serial_reg.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/delay.h> | |
c6ed413d | 39 | #include <linux/of_device.h> |
1da177e4 LT |
40 | |
41 | #include <asm/io.h> | |
42 | #include <asm/irq.h> | |
1708d242 | 43 | #include <asm/prom.h> |
d550bbd4 | 44 | #include <asm/setup.h> |
1da177e4 LT |
45 | |
46 | #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
47 | #define SUPPORT_SYSRQ | |
48 | #endif | |
49 | ||
50 | #include <linux/serial_core.h> | |
6816383a | 51 | #include <linux/sunserialcore.h> |
1da177e4 LT |
52 | |
53 | /* We are on a NS PC87303 clocked with 24.0 MHz, which results | |
54 | * in a UART clock of 1.8462 MHz. | |
55 | */ | |
56 | #define SU_BASE_BAUD (1846200 / 16) | |
57 | ||
58 | enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; | |
59 | static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; | |
60 | ||
4b71598b PG |
61 | struct serial_uart_config { |
62 | char *name; | |
63 | int dfl_xmit_fifo_size; | |
64 | int flags; | |
65 | }; | |
66 | ||
1da177e4 LT |
67 | /* |
68 | * Here we define the default xmit fifo size used for each type of UART. | |
69 | */ | |
e2c65425 | 70 | static const struct serial_uart_config uart_config[] = { |
1da177e4 LT |
71 | { "unknown", 1, 0 }, |
72 | { "8250", 1, 0 }, | |
73 | { "16450", 1, 0 }, | |
74 | { "16550", 1, 0 }, | |
75 | { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, | |
76 | { "Cirrus", 1, 0 }, | |
77 | { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, | |
78 | { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, | |
79 | { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, | |
80 | { "Startech", 1, 0 }, | |
81 | { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, | |
82 | { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, | |
83 | { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, | |
84 | { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } | |
85 | }; | |
86 | ||
87 | struct uart_sunsu_port { | |
88 | struct uart_port port; | |
89 | unsigned char acr; | |
90 | unsigned char ier; | |
91 | unsigned short rev; | |
92 | unsigned char lcr; | |
93 | unsigned int lsr_break_flag; | |
94 | unsigned int cflag; | |
95 | ||
96 | /* Probing information. */ | |
97 | enum su_type su_type; | |
98 | unsigned int type_probed; /* XXX Stupid */ | |
1708d242 | 99 | unsigned long reg_size; |
1da177e4 LT |
100 | |
101 | #ifdef CONFIG_SERIO | |
1708d242 | 102 | struct serio serio; |
1da177e4 LT |
103 | int serio_open; |
104 | #endif | |
105 | }; | |
106 | ||
41c28ff1 | 107 | static unsigned int serial_in(struct uart_sunsu_port *up, int offset) |
1da177e4 LT |
108 | { |
109 | offset <<= up->port.regshift; | |
110 | ||
111 | switch (up->port.iotype) { | |
9b4a1617 | 112 | case UPIO_HUB6: |
1da177e4 LT |
113 | outb(up->port.hub6 - 1 + offset, up->port.iobase); |
114 | return inb(up->port.iobase + 1); | |
115 | ||
9b4a1617 | 116 | case UPIO_MEM: |
1da177e4 LT |
117 | return readb(up->port.membase + offset); |
118 | ||
119 | default: | |
120 | return inb(up->port.iobase + offset); | |
121 | } | |
122 | } | |
123 | ||
41c28ff1 | 124 | static void serial_out(struct uart_sunsu_port *up, int offset, int value) |
1da177e4 LT |
125 | { |
126 | #ifndef CONFIG_SPARC64 | |
127 | /* | |
128 | * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are | |
129 | * connected with a gate then go to SlavIO. When IRQ4 goes tristated | |
130 | * gate outputs a logical one. Since we use level triggered interrupts | |
131 | * we have lockup and watchdog reset. We cannot mask IRQ because | |
132 | * keyboard shares IRQ with us (Word has it as Bob Smelik's design). | |
133 | * This problem is similar to what Alpha people suffer, see serial.c. | |
134 | */ | |
135 | if (offset == UART_MCR) | |
136 | value |= UART_MCR_OUT2; | |
137 | #endif | |
138 | offset <<= up->port.regshift; | |
139 | ||
140 | switch (up->port.iotype) { | |
9b4a1617 | 141 | case UPIO_HUB6: |
1da177e4 LT |
142 | outb(up->port.hub6 - 1 + offset, up->port.iobase); |
143 | outb(value, up->port.iobase + 1); | |
144 | break; | |
145 | ||
9b4a1617 | 146 | case UPIO_MEM: |
1da177e4 LT |
147 | writeb(value, up->port.membase + offset); |
148 | break; | |
149 | ||
150 | default: | |
151 | outb(value, up->port.iobase + offset); | |
152 | } | |
153 | } | |
154 | ||
155 | /* | |
156 | * We used to support using pause I/O for certain machines. We | |
157 | * haven't supported this for a while, but just in case it's badly | |
158 | * needed for certain old 386 machines, I've left these #define's | |
159 | * in.... | |
160 | */ | |
161 | #define serial_inp(up, offset) serial_in(up, offset) | |
162 | #define serial_outp(up, offset, value) serial_out(up, offset, value) | |
163 | ||
164 | ||
165 | /* | |
166 | * For the 16C950 | |
167 | */ | |
168 | static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) | |
169 | { | |
170 | serial_out(up, UART_SCR, offset); | |
171 | serial_out(up, UART_ICR, value); | |
172 | } | |
173 | ||
174 | #if 0 /* Unused currently */ | |
175 | static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) | |
176 | { | |
177 | unsigned int value; | |
178 | ||
179 | serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); | |
180 | serial_out(up, UART_SCR, offset); | |
181 | value = serial_in(up, UART_ICR); | |
182 | serial_icr_write(up, UART_ACR, up->acr); | |
183 | ||
184 | return value; | |
185 | } | |
186 | #endif | |
187 | ||
188 | #ifdef CONFIG_SERIAL_8250_RSA | |
189 | /* | |
190 | * Attempts to turn on the RSA FIFO. Returns zero on failure. | |
191 | * We set the port uart clock rate if we succeed. | |
192 | */ | |
193 | static int __enable_rsa(struct uart_sunsu_port *up) | |
194 | { | |
195 | unsigned char mode; | |
196 | int result; | |
197 | ||
198 | mode = serial_inp(up, UART_RSA_MSR); | |
199 | result = mode & UART_RSA_MSR_FIFO; | |
200 | ||
201 | if (!result) { | |
202 | serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); | |
203 | mode = serial_inp(up, UART_RSA_MSR); | |
204 | result = mode & UART_RSA_MSR_FIFO; | |
205 | } | |
206 | ||
207 | if (result) | |
208 | up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; | |
209 | ||
210 | return result; | |
211 | } | |
212 | ||
213 | static void enable_rsa(struct uart_sunsu_port *up) | |
214 | { | |
215 | if (up->port.type == PORT_RSA) { | |
216 | if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { | |
217 | spin_lock_irq(&up->port.lock); | |
218 | __enable_rsa(up); | |
219 | spin_unlock_irq(&up->port.lock); | |
220 | } | |
221 | if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) | |
222 | serial_outp(up, UART_RSA_FRR, 0); | |
223 | } | |
224 | } | |
225 | ||
226 | /* | |
227 | * Attempts to turn off the RSA FIFO. Returns zero on failure. | |
228 | * It is unknown why interrupts were disabled in here. However, | |
229 | * the caller is expected to preserve this behaviour by grabbing | |
230 | * the spinlock before calling this function. | |
231 | */ | |
232 | static void disable_rsa(struct uart_sunsu_port *up) | |
233 | { | |
234 | unsigned char mode; | |
235 | int result; | |
236 | ||
237 | if (up->port.type == PORT_RSA && | |
238 | up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { | |
239 | spin_lock_irq(&up->port.lock); | |
240 | ||
241 | mode = serial_inp(up, UART_RSA_MSR); | |
242 | result = !(mode & UART_RSA_MSR_FIFO); | |
243 | ||
244 | if (!result) { | |
245 | serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); | |
246 | mode = serial_inp(up, UART_RSA_MSR); | |
247 | result = !(mode & UART_RSA_MSR_FIFO); | |
248 | } | |
249 | ||
250 | if (result) | |
251 | up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; | |
252 | spin_unlock_irq(&up->port.lock); | |
253 | } | |
254 | } | |
255 | #endif /* CONFIG_SERIAL_8250_RSA */ | |
256 | ||
b129a8cc RK |
257 | static inline void __stop_tx(struct uart_sunsu_port *p) |
258 | { | |
259 | if (p->ier & UART_IER_THRI) { | |
260 | p->ier &= ~UART_IER_THRI; | |
261 | serial_out(p, UART_IER, p->ier); | |
262 | } | |
263 | } | |
264 | ||
265 | static void sunsu_stop_tx(struct uart_port *port) | |
1da177e4 LT |
266 | { |
267 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
268 | ||
b129a8cc RK |
269 | __stop_tx(up); |
270 | ||
3d9c9948 AV |
271 | /* |
272 | * We really want to stop the transmitter from sending. | |
273 | */ | |
274 | if (up->port.type == PORT_16C950) { | |
1da177e4 LT |
275 | up->acr |= UART_ACR_TXDIS; |
276 | serial_icr_write(up, UART_ACR, up->acr); | |
277 | } | |
278 | } | |
279 | ||
b129a8cc | 280 | static void sunsu_start_tx(struct uart_port *port) |
1da177e4 LT |
281 | { |
282 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
283 | ||
284 | if (!(up->ier & UART_IER_THRI)) { | |
285 | up->ier |= UART_IER_THRI; | |
286 | serial_out(up, UART_IER, up->ier); | |
287 | } | |
3d9c9948 | 288 | |
1da177e4 | 289 | /* |
3d9c9948 | 290 | * Re-enable the transmitter if we disabled it. |
1da177e4 | 291 | */ |
3d9c9948 | 292 | if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { |
1da177e4 LT |
293 | up->acr &= ~UART_ACR_TXDIS; |
294 | serial_icr_write(up, UART_ACR, up->acr); | |
295 | } | |
296 | } | |
297 | ||
298 | static void sunsu_stop_rx(struct uart_port *port) | |
299 | { | |
300 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
1da177e4 | 301 | |
1da177e4 LT |
302 | up->ier &= ~UART_IER_RLSI; |
303 | up->port.read_status_mask &= ~UART_LSR_DR; | |
304 | serial_out(up, UART_IER, up->ier); | |
1da177e4 LT |
305 | } |
306 | ||
307 | static void sunsu_enable_ms(struct uart_port *port) | |
308 | { | |
309 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
310 | unsigned long flags; | |
311 | ||
312 | spin_lock_irqsave(&up->port.lock, flags); | |
313 | up->ier |= UART_IER_MSI; | |
314 | serial_out(up, UART_IER, up->ier); | |
315 | spin_unlock_irqrestore(&up->port.lock, flags); | |
316 | } | |
317 | ||
2e124b4a | 318 | static void |
7d12e780 | 319 | receive_chars(struct uart_sunsu_port *up, unsigned char *status) |
1da177e4 | 320 | { |
92a19f9c | 321 | struct tty_port *port = &up->port.state->port; |
33f0f88f | 322 | unsigned char ch, flag; |
1da177e4 LT |
323 | int max_count = 256; |
324 | int saw_console_brk = 0; | |
325 | ||
326 | do { | |
1da177e4 | 327 | ch = serial_inp(up, UART_RX); |
33f0f88f | 328 | flag = TTY_NORMAL; |
1da177e4 LT |
329 | up->port.icount.rx++; |
330 | ||
331 | if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | | |
332 | UART_LSR_FE | UART_LSR_OE))) { | |
333 | /* | |
334 | * For statistics only | |
335 | */ | |
336 | if (*status & UART_LSR_BI) { | |
337 | *status &= ~(UART_LSR_FE | UART_LSR_PE); | |
338 | up->port.icount.brk++; | |
339 | if (up->port.cons != NULL && | |
340 | up->port.line == up->port.cons->index) | |
341 | saw_console_brk = 1; | |
342 | /* | |
343 | * We do the SysRQ and SAK checking | |
344 | * here because otherwise the break | |
345 | * may get masked by ignore_status_mask | |
346 | * or read_status_mask. | |
347 | */ | |
348 | if (uart_handle_break(&up->port)) | |
349 | goto ignore_char; | |
350 | } else if (*status & UART_LSR_PE) | |
351 | up->port.icount.parity++; | |
352 | else if (*status & UART_LSR_FE) | |
353 | up->port.icount.frame++; | |
354 | if (*status & UART_LSR_OE) | |
355 | up->port.icount.overrun++; | |
356 | ||
357 | /* | |
358 | * Mask off conditions which should be ingored. | |
359 | */ | |
360 | *status &= up->port.read_status_mask; | |
361 | ||
362 | if (up->port.cons != NULL && | |
363 | up->port.line == up->port.cons->index) { | |
364 | /* Recover the break flag from console xmit */ | |
365 | *status |= up->lsr_break_flag; | |
366 | up->lsr_break_flag = 0; | |
367 | } | |
368 | ||
369 | if (*status & UART_LSR_BI) { | |
33f0f88f | 370 | flag = TTY_BREAK; |
1da177e4 | 371 | } else if (*status & UART_LSR_PE) |
33f0f88f | 372 | flag = TTY_PARITY; |
1da177e4 | 373 | else if (*status & UART_LSR_FE) |
33f0f88f | 374 | flag = TTY_FRAME; |
1da177e4 | 375 | } |
7d12e780 | 376 | if (uart_handle_sysrq_char(&up->port, ch)) |
1da177e4 | 377 | goto ignore_char; |
33f0f88f | 378 | if ((*status & up->port.ignore_status_mask) == 0) |
92a19f9c | 379 | tty_insert_flip_char(port, ch, flag); |
33f0f88f | 380 | if (*status & UART_LSR_OE) |
1da177e4 LT |
381 | /* |
382 | * Overrun is special, since it's reported | |
383 | * immediately, and doesn't affect the current | |
384 | * character. | |
385 | */ | |
92a19f9c | 386 | tty_insert_flip_char(port, 0, TTY_OVERRUN); |
1da177e4 LT |
387 | ignore_char: |
388 | *status = serial_inp(up, UART_LSR); | |
389 | } while ((*status & UART_LSR_DR) && (max_count-- > 0)); | |
390 | ||
391 | if (saw_console_brk) | |
392 | sun_do_break(); | |
1da177e4 LT |
393 | } |
394 | ||
41c28ff1 | 395 | static void transmit_chars(struct uart_sunsu_port *up) |
1da177e4 | 396 | { |
ebd2c8f6 | 397 | struct circ_buf *xmit = &up->port.state->xmit; |
1da177e4 LT |
398 | int count; |
399 | ||
400 | if (up->port.x_char) { | |
401 | serial_outp(up, UART_TX, up->port.x_char); | |
402 | up->port.icount.tx++; | |
403 | up->port.x_char = 0; | |
404 | return; | |
405 | } | |
b129a8cc RK |
406 | if (uart_tx_stopped(&up->port)) { |
407 | sunsu_stop_tx(&up->port); | |
408 | return; | |
409 | } | |
410 | if (uart_circ_empty(xmit)) { | |
411 | __stop_tx(up); | |
1da177e4 LT |
412 | return; |
413 | } | |
414 | ||
415 | count = up->port.fifosize; | |
416 | do { | |
417 | serial_out(up, UART_TX, xmit->buf[xmit->tail]); | |
418 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
419 | up->port.icount.tx++; | |
420 | if (uart_circ_empty(xmit)) | |
421 | break; | |
422 | } while (--count > 0); | |
423 | ||
424 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
425 | uart_write_wakeup(&up->port); | |
426 | ||
427 | if (uart_circ_empty(xmit)) | |
b129a8cc | 428 | __stop_tx(up); |
1da177e4 LT |
429 | } |
430 | ||
41c28ff1 | 431 | static void check_modem_status(struct uart_sunsu_port *up) |
1da177e4 LT |
432 | { |
433 | int status; | |
434 | ||
435 | status = serial_in(up, UART_MSR); | |
436 | ||
437 | if ((status & UART_MSR_ANY_DELTA) == 0) | |
438 | return; | |
439 | ||
440 | if (status & UART_MSR_TERI) | |
441 | up->port.icount.rng++; | |
442 | if (status & UART_MSR_DDSR) | |
443 | up->port.icount.dsr++; | |
444 | if (status & UART_MSR_DDCD) | |
445 | uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); | |
446 | if (status & UART_MSR_DCTS) | |
447 | uart_handle_cts_change(&up->port, status & UART_MSR_CTS); | |
448 | ||
bdc04e31 | 449 | wake_up_interruptible(&up->port.state->port.delta_msr_wait); |
1da177e4 LT |
450 | } |
451 | ||
7d12e780 | 452 | static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) |
1da177e4 LT |
453 | { |
454 | struct uart_sunsu_port *up = dev_id; | |
455 | unsigned long flags; | |
456 | unsigned char status; | |
457 | ||
458 | spin_lock_irqsave(&up->port.lock, flags); | |
459 | ||
460 | do { | |
1da177e4 | 461 | status = serial_inp(up, UART_LSR); |
1da177e4 | 462 | if (status & UART_LSR_DR) |
2e124b4a | 463 | receive_chars(up, &status); |
1da177e4 LT |
464 | check_modem_status(up); |
465 | if (status & UART_LSR_THRE) | |
466 | transmit_chars(up); | |
467 | ||
468 | spin_unlock_irqrestore(&up->port.lock, flags); | |
469 | ||
2e124b4a | 470 | tty_flip_buffer_push(&up->port.state->port); |
1da177e4 LT |
471 | |
472 | spin_lock_irqsave(&up->port.lock, flags); | |
473 | ||
474 | } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); | |
475 | ||
476 | spin_unlock_irqrestore(&up->port.lock, flags); | |
477 | ||
478 | return IRQ_HANDLED; | |
479 | } | |
480 | ||
481 | /* Separate interrupt handling path for keyboard/mouse ports. */ | |
482 | ||
483 | static void | |
484 | sunsu_change_speed(struct uart_port *port, unsigned int cflag, | |
485 | unsigned int iflag, unsigned int quot); | |
486 | ||
487 | static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) | |
488 | { | |
489 | unsigned int cur_cflag = up->cflag; | |
490 | int quot, new_baud; | |
491 | ||
492 | up->cflag &= ~CBAUD; | |
493 | up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); | |
494 | ||
495 | quot = up->port.uartclk / (16 * new_baud); | |
496 | ||
1da177e4 | 497 | sunsu_change_speed(&up->port, up->cflag, 0, quot); |
1da177e4 LT |
498 | } |
499 | ||
7d12e780 | 500 | static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) |
1da177e4 LT |
501 | { |
502 | do { | |
503 | unsigned char ch = serial_inp(up, UART_RX); | |
504 | ||
505 | /* Stop-A is handled by drivers/char/keyboard.c now. */ | |
506 | if (up->su_type == SU_PORT_KBD) { | |
507 | #ifdef CONFIG_SERIO | |
7d12e780 | 508 | serio_interrupt(&up->serio, ch, 0); |
1da177e4 LT |
509 | #endif |
510 | } else if (up->su_type == SU_PORT_MS) { | |
511 | int ret = suncore_mouse_baud_detection(ch, is_break); | |
512 | ||
513 | switch (ret) { | |
514 | case 2: | |
515 | sunsu_change_mouse_baud(up); | |
516 | /* fallthru */ | |
517 | case 1: | |
518 | break; | |
519 | ||
520 | case 0: | |
521 | #ifdef CONFIG_SERIO | |
7d12e780 | 522 | serio_interrupt(&up->serio, ch, 0); |
1da177e4 LT |
523 | #endif |
524 | break; | |
525 | }; | |
526 | } | |
527 | } while (serial_in(up, UART_LSR) & UART_LSR_DR); | |
528 | } | |
529 | ||
7d12e780 | 530 | static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) |
1da177e4 LT |
531 | { |
532 | struct uart_sunsu_port *up = dev_id; | |
533 | ||
534 | if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { | |
535 | unsigned char status = serial_inp(up, UART_LSR); | |
536 | ||
537 | if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) | |
7d12e780 | 538 | receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); |
1da177e4 LT |
539 | } |
540 | ||
541 | return IRQ_HANDLED; | |
542 | } | |
543 | ||
544 | static unsigned int sunsu_tx_empty(struct uart_port *port) | |
545 | { | |
546 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
547 | unsigned long flags; | |
548 | unsigned int ret; | |
549 | ||
550 | spin_lock_irqsave(&up->port.lock, flags); | |
551 | ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; | |
552 | spin_unlock_irqrestore(&up->port.lock, flags); | |
553 | ||
554 | return ret; | |
555 | } | |
556 | ||
557 | static unsigned int sunsu_get_mctrl(struct uart_port *port) | |
558 | { | |
559 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
1da177e4 LT |
560 | unsigned char status; |
561 | unsigned int ret; | |
562 | ||
1da177e4 | 563 | status = serial_in(up, UART_MSR); |
1da177e4 LT |
564 | |
565 | ret = 0; | |
566 | if (status & UART_MSR_DCD) | |
567 | ret |= TIOCM_CAR; | |
568 | if (status & UART_MSR_RI) | |
569 | ret |= TIOCM_RNG; | |
570 | if (status & UART_MSR_DSR) | |
571 | ret |= TIOCM_DSR; | |
572 | if (status & UART_MSR_CTS) | |
573 | ret |= TIOCM_CTS; | |
574 | return ret; | |
575 | } | |
576 | ||
577 | static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
578 | { | |
579 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
580 | unsigned char mcr = 0; | |
581 | ||
582 | if (mctrl & TIOCM_RTS) | |
583 | mcr |= UART_MCR_RTS; | |
584 | if (mctrl & TIOCM_DTR) | |
585 | mcr |= UART_MCR_DTR; | |
586 | if (mctrl & TIOCM_OUT1) | |
587 | mcr |= UART_MCR_OUT1; | |
588 | if (mctrl & TIOCM_OUT2) | |
589 | mcr |= UART_MCR_OUT2; | |
590 | if (mctrl & TIOCM_LOOP) | |
591 | mcr |= UART_MCR_LOOP; | |
592 | ||
593 | serial_out(up, UART_MCR, mcr); | |
594 | } | |
595 | ||
596 | static void sunsu_break_ctl(struct uart_port *port, int break_state) | |
597 | { | |
598 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
599 | unsigned long flags; | |
600 | ||
601 | spin_lock_irqsave(&up->port.lock, flags); | |
602 | if (break_state == -1) | |
603 | up->lcr |= UART_LCR_SBC; | |
604 | else | |
605 | up->lcr &= ~UART_LCR_SBC; | |
606 | serial_out(up, UART_LCR, up->lcr); | |
607 | spin_unlock_irqrestore(&up->port.lock, flags); | |
608 | } | |
609 | ||
610 | static int sunsu_startup(struct uart_port *port) | |
611 | { | |
612 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
613 | unsigned long flags; | |
614 | int retval; | |
615 | ||
616 | if (up->port.type == PORT_16C950) { | |
617 | /* Wake up and initialize UART */ | |
618 | up->acr = 0; | |
619 | serial_outp(up, UART_LCR, 0xBF); | |
620 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
621 | serial_outp(up, UART_IER, 0); | |
622 | serial_outp(up, UART_LCR, 0); | |
623 | serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ | |
624 | serial_outp(up, UART_LCR, 0xBF); | |
625 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
626 | serial_outp(up, UART_LCR, 0); | |
627 | } | |
628 | ||
629 | #ifdef CONFIG_SERIAL_8250_RSA | |
630 | /* | |
631 | * If this is an RSA port, see if we can kick it up to the | |
632 | * higher speed clock. | |
633 | */ | |
634 | enable_rsa(up); | |
635 | #endif | |
636 | ||
637 | /* | |
638 | * Clear the FIFO buffers and disable them. | |
7f927fcc | 639 | * (they will be reenabled in set_termios()) |
1da177e4 LT |
640 | */ |
641 | if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { | |
642 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
643 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | | |
644 | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); | |
645 | serial_outp(up, UART_FCR, 0); | |
646 | } | |
647 | ||
648 | /* | |
649 | * Clear the interrupt registers. | |
650 | */ | |
651 | (void) serial_inp(up, UART_LSR); | |
652 | (void) serial_inp(up, UART_RX); | |
653 | (void) serial_inp(up, UART_IIR); | |
654 | (void) serial_inp(up, UART_MSR); | |
655 | ||
656 | /* | |
657 | * At this point, there's no way the LSR could still be 0xff; | |
658 | * if it is, then bail out, because there's likely no UART | |
659 | * here. | |
660 | */ | |
ce8337cb | 661 | if (!(up->port.flags & UPF_BUGGY_UART) && |
1da177e4 LT |
662 | (serial_inp(up, UART_LSR) == 0xff)) { |
663 | printk("ttyS%d: LSR safety check engaged!\n", up->port.line); | |
664 | return -ENODEV; | |
665 | } | |
666 | ||
667 | if (up->su_type != SU_PORT_PORT) { | |
668 | retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, | |
40663cc7 | 669 | IRQF_SHARED, su_typev[up->su_type], up); |
1da177e4 LT |
670 | } else { |
671 | retval = request_irq(up->port.irq, sunsu_serial_interrupt, | |
40663cc7 | 672 | IRQF_SHARED, su_typev[up->su_type], up); |
1da177e4 LT |
673 | } |
674 | if (retval) { | |
675 | printk("su: Cannot register IRQ %d\n", up->port.irq); | |
676 | return retval; | |
677 | } | |
678 | ||
679 | /* | |
680 | * Now, initialize the UART | |
681 | */ | |
682 | serial_outp(up, UART_LCR, UART_LCR_WLEN8); | |
683 | ||
684 | spin_lock_irqsave(&up->port.lock, flags); | |
685 | ||
686 | up->port.mctrl |= TIOCM_OUT2; | |
687 | ||
688 | sunsu_set_mctrl(&up->port, up->port.mctrl); | |
689 | spin_unlock_irqrestore(&up->port.lock, flags); | |
690 | ||
691 | /* | |
692 | * Finally, enable interrupts. Note: Modem status interrupts | |
693 | * are set via set_termios(), which will be occurring imminently | |
694 | * anyway, so we don't enable them here. | |
695 | */ | |
696 | up->ier = UART_IER_RLSI | UART_IER_RDI; | |
697 | serial_outp(up, UART_IER, up->ier); | |
698 | ||
ce8337cb | 699 | if (up->port.flags & UPF_FOURPORT) { |
1da177e4 LT |
700 | unsigned int icp; |
701 | /* | |
702 | * Enable interrupts on the AST Fourport board | |
703 | */ | |
704 | icp = (up->port.iobase & 0xfe0) | 0x01f; | |
705 | outb_p(0x80, icp); | |
706 | (void) inb_p(icp); | |
707 | } | |
708 | ||
709 | /* | |
710 | * And clear the interrupt registers again for luck. | |
711 | */ | |
712 | (void) serial_inp(up, UART_LSR); | |
713 | (void) serial_inp(up, UART_RX); | |
714 | (void) serial_inp(up, UART_IIR); | |
715 | (void) serial_inp(up, UART_MSR); | |
716 | ||
717 | return 0; | |
718 | } | |
719 | ||
720 | static void sunsu_shutdown(struct uart_port *port) | |
721 | { | |
722 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
723 | unsigned long flags; | |
724 | ||
725 | /* | |
726 | * Disable interrupts from this port | |
727 | */ | |
728 | up->ier = 0; | |
729 | serial_outp(up, UART_IER, 0); | |
730 | ||
731 | spin_lock_irqsave(&up->port.lock, flags); | |
ce8337cb | 732 | if (up->port.flags & UPF_FOURPORT) { |
1da177e4 LT |
733 | /* reset interrupts on the AST Fourport board */ |
734 | inb((up->port.iobase & 0xfe0) | 0x1f); | |
735 | up->port.mctrl |= TIOCM_OUT1; | |
736 | } else | |
737 | up->port.mctrl &= ~TIOCM_OUT2; | |
738 | ||
739 | sunsu_set_mctrl(&up->port, up->port.mctrl); | |
740 | spin_unlock_irqrestore(&up->port.lock, flags); | |
741 | ||
742 | /* | |
743 | * Disable break condition and FIFOs | |
744 | */ | |
745 | serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); | |
746 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | | |
747 | UART_FCR_CLEAR_RCVR | | |
748 | UART_FCR_CLEAR_XMIT); | |
749 | serial_outp(up, UART_FCR, 0); | |
750 | ||
751 | #ifdef CONFIG_SERIAL_8250_RSA | |
752 | /* | |
753 | * Reset the RSA board back to 115kbps compat mode. | |
754 | */ | |
755 | disable_rsa(up); | |
756 | #endif | |
757 | ||
758 | /* | |
759 | * Read data port to reset things. | |
760 | */ | |
761 | (void) serial_in(up, UART_RX); | |
762 | ||
763 | free_irq(up->port.irq, up); | |
764 | } | |
765 | ||
766 | static void | |
767 | sunsu_change_speed(struct uart_port *port, unsigned int cflag, | |
768 | unsigned int iflag, unsigned int quot) | |
769 | { | |
770 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
771 | unsigned char cval, fcr = 0; | |
772 | unsigned long flags; | |
773 | ||
774 | switch (cflag & CSIZE) { | |
775 | case CS5: | |
776 | cval = 0x00; | |
777 | break; | |
778 | case CS6: | |
779 | cval = 0x01; | |
780 | break; | |
781 | case CS7: | |
782 | cval = 0x02; | |
783 | break; | |
784 | default: | |
785 | case CS8: | |
786 | cval = 0x03; | |
787 | break; | |
788 | } | |
789 | ||
790 | if (cflag & CSTOPB) | |
791 | cval |= 0x04; | |
792 | if (cflag & PARENB) | |
793 | cval |= UART_LCR_PARITY; | |
794 | if (!(cflag & PARODD)) | |
795 | cval |= UART_LCR_EPAR; | |
796 | #ifdef CMSPAR | |
797 | if (cflag & CMSPAR) | |
798 | cval |= UART_LCR_SPAR; | |
799 | #endif | |
800 | ||
801 | /* | |
802 | * Work around a bug in the Oxford Semiconductor 952 rev B | |
803 | * chip which causes it to seriously miscalculate baud rates | |
804 | * when DLL is 0. | |
805 | */ | |
806 | if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && | |
807 | up->rev == 0x5201) | |
808 | quot ++; | |
809 | ||
810 | if (uart_config[up->port.type].flags & UART_USE_FIFO) { | |
811 | if ((up->port.uartclk / quot) < (2400 * 16)) | |
812 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; | |
813 | #ifdef CONFIG_SERIAL_8250_RSA | |
814 | else if (up->port.type == PORT_RSA) | |
815 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; | |
816 | #endif | |
817 | else | |
818 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; | |
819 | } | |
820 | if (up->port.type == PORT_16750) | |
821 | fcr |= UART_FCR7_64BYTE; | |
822 | ||
823 | /* | |
824 | * Ok, we're now changing the port state. Do it with | |
825 | * interrupts disabled. | |
826 | */ | |
827 | spin_lock_irqsave(&up->port.lock, flags); | |
828 | ||
829 | /* | |
830 | * Update the per-port timeout. | |
831 | */ | |
832 | uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); | |
833 | ||
834 | up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; | |
835 | if (iflag & INPCK) | |
836 | up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; | |
837 | if (iflag & (BRKINT | PARMRK)) | |
838 | up->port.read_status_mask |= UART_LSR_BI; | |
839 | ||
840 | /* | |
841 | * Characteres to ignore | |
842 | */ | |
843 | up->port.ignore_status_mask = 0; | |
844 | if (iflag & IGNPAR) | |
845 | up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; | |
846 | if (iflag & IGNBRK) { | |
847 | up->port.ignore_status_mask |= UART_LSR_BI; | |
848 | /* | |
849 | * If we're ignoring parity and break indicators, | |
850 | * ignore overruns too (for real raw support). | |
851 | */ | |
852 | if (iflag & IGNPAR) | |
853 | up->port.ignore_status_mask |= UART_LSR_OE; | |
854 | } | |
855 | ||
856 | /* | |
857 | * ignore all characters if CREAD is not set | |
858 | */ | |
859 | if ((cflag & CREAD) == 0) | |
860 | up->port.ignore_status_mask |= UART_LSR_DR; | |
861 | ||
862 | /* | |
863 | * CTS flow control flag and modem status interrupts | |
864 | */ | |
865 | up->ier &= ~UART_IER_MSI; | |
866 | if (UART_ENABLE_MS(&up->port, cflag)) | |
867 | up->ier |= UART_IER_MSI; | |
868 | ||
869 | serial_out(up, UART_IER, up->ier); | |
870 | ||
871 | if (uart_config[up->port.type].flags & UART_STARTECH) { | |
872 | serial_outp(up, UART_LCR, 0xBF); | |
873 | serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); | |
874 | } | |
875 | serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ | |
876 | serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ | |
877 | serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ | |
878 | if (up->port.type == PORT_16750) | |
879 | serial_outp(up, UART_FCR, fcr); /* set fcr */ | |
880 | serial_outp(up, UART_LCR, cval); /* reset DLAB */ | |
881 | up->lcr = cval; /* Save LCR */ | |
882 | if (up->port.type != PORT_16750) { | |
883 | if (fcr & UART_FCR_ENABLE_FIFO) { | |
884 | /* emulated UARTs (Lucent Venus 167x) need two steps */ | |
885 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
886 | } | |
887 | serial_outp(up, UART_FCR, fcr); /* set fcr */ | |
888 | } | |
889 | ||
890 | up->cflag = cflag; | |
891 | ||
892 | spin_unlock_irqrestore(&up->port.lock, flags); | |
893 | } | |
894 | ||
895 | static void | |
606d099c AC |
896 | sunsu_set_termios(struct uart_port *port, struct ktermios *termios, |
897 | struct ktermios *old) | |
1da177e4 LT |
898 | { |
899 | unsigned int baud, quot; | |
900 | ||
901 | /* | |
902 | * Ask the core to calculate the divisor for us. | |
903 | */ | |
904 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | |
905 | quot = uart_get_divisor(port, baud); | |
906 | ||
907 | sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); | |
908 | } | |
909 | ||
910 | static void sunsu_release_port(struct uart_port *port) | |
911 | { | |
912 | } | |
913 | ||
914 | static int sunsu_request_port(struct uart_port *port) | |
915 | { | |
916 | return 0; | |
917 | } | |
918 | ||
919 | static void sunsu_config_port(struct uart_port *port, int flags) | |
920 | { | |
921 | struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; | |
922 | ||
923 | if (flags & UART_CONFIG_TYPE) { | |
924 | /* | |
925 | * We are supposed to call autoconfig here, but this requires | |
926 | * splitting all the OBP probing crap from the UART probing. | |
927 | * We'll do it when we kill sunsu.c altogether. | |
928 | */ | |
929 | port->type = up->type_probed; /* XXX */ | |
930 | } | |
931 | } | |
932 | ||
933 | static int | |
934 | sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) | |
935 | { | |
936 | return -EINVAL; | |
937 | } | |
938 | ||
939 | static const char * | |
940 | sunsu_type(struct uart_port *port) | |
941 | { | |
942 | int type = port->type; | |
943 | ||
944 | if (type >= ARRAY_SIZE(uart_config)) | |
945 | type = 0; | |
946 | return uart_config[type].name; | |
947 | } | |
948 | ||
949 | static struct uart_ops sunsu_pops = { | |
950 | .tx_empty = sunsu_tx_empty, | |
951 | .set_mctrl = sunsu_set_mctrl, | |
952 | .get_mctrl = sunsu_get_mctrl, | |
953 | .stop_tx = sunsu_stop_tx, | |
954 | .start_tx = sunsu_start_tx, | |
955 | .stop_rx = sunsu_stop_rx, | |
956 | .enable_ms = sunsu_enable_ms, | |
957 | .break_ctl = sunsu_break_ctl, | |
958 | .startup = sunsu_startup, | |
959 | .shutdown = sunsu_shutdown, | |
960 | .set_termios = sunsu_set_termios, | |
961 | .type = sunsu_type, | |
962 | .release_port = sunsu_release_port, | |
963 | .request_port = sunsu_request_port, | |
964 | .config_port = sunsu_config_port, | |
965 | .verify_port = sunsu_verify_port, | |
966 | }; | |
967 | ||
968 | #define UART_NR 4 | |
969 | ||
970 | static struct uart_sunsu_port sunsu_ports[UART_NR]; | |
cb29529e | 971 | static int nr_inst; /* Number of already registered ports */ |
1da177e4 LT |
972 | |
973 | #ifdef CONFIG_SERIO | |
974 | ||
975 | static DEFINE_SPINLOCK(sunsu_serio_lock); | |
976 | ||
977 | static int sunsu_serio_write(struct serio *serio, unsigned char ch) | |
978 | { | |
979 | struct uart_sunsu_port *up = serio->port_data; | |
980 | unsigned long flags; | |
981 | int lsr; | |
982 | ||
983 | spin_lock_irqsave(&sunsu_serio_lock, flags); | |
984 | ||
985 | do { | |
986 | lsr = serial_in(up, UART_LSR); | |
987 | } while (!(lsr & UART_LSR_THRE)); | |
988 | ||
989 | /* Send the character out. */ | |
990 | serial_out(up, UART_TX, ch); | |
991 | ||
992 | spin_unlock_irqrestore(&sunsu_serio_lock, flags); | |
993 | ||
994 | return 0; | |
995 | } | |
996 | ||
997 | static int sunsu_serio_open(struct serio *serio) | |
998 | { | |
999 | struct uart_sunsu_port *up = serio->port_data; | |
1000 | unsigned long flags; | |
1001 | int ret; | |
1002 | ||
1003 | spin_lock_irqsave(&sunsu_serio_lock, flags); | |
1004 | if (!up->serio_open) { | |
1005 | up->serio_open = 1; | |
1006 | ret = 0; | |
1007 | } else | |
1008 | ret = -EBUSY; | |
1009 | spin_unlock_irqrestore(&sunsu_serio_lock, flags); | |
1010 | ||
1011 | return ret; | |
1012 | } | |
1013 | ||
1014 | static void sunsu_serio_close(struct serio *serio) | |
1015 | { | |
1016 | struct uart_sunsu_port *up = serio->port_data; | |
1017 | unsigned long flags; | |
1018 | ||
1019 | spin_lock_irqsave(&sunsu_serio_lock, flags); | |
1020 | up->serio_open = 0; | |
1021 | spin_unlock_irqrestore(&sunsu_serio_lock, flags); | |
1022 | } | |
1023 | ||
1024 | #endif /* CONFIG_SERIO */ | |
1025 | ||
1026 | static void sunsu_autoconfig(struct uart_sunsu_port *up) | |
1027 | { | |
1028 | unsigned char status1, status2, scratch, scratch2, scratch3; | |
1029 | unsigned char save_lcr, save_mcr; | |
1da177e4 LT |
1030 | unsigned long flags; |
1031 | ||
1708d242 | 1032 | if (up->su_type == SU_PORT_NONE) |
1da177e4 LT |
1033 | return; |
1034 | ||
1035 | up->type_probed = PORT_UNKNOWN; | |
9b4a1617 | 1036 | up->port.iotype = UPIO_MEM; |
1da177e4 | 1037 | |
1da177e4 LT |
1038 | spin_lock_irqsave(&up->port.lock, flags); |
1039 | ||
ce8337cb | 1040 | if (!(up->port.flags & UPF_BUGGY_UART)) { |
1da177e4 LT |
1041 | /* |
1042 | * Do a simple existence test first; if we fail this, there's | |
1043 | * no point trying anything else. | |
1044 | * | |
1045 | * 0x80 is used as a nonsense port to prevent against false | |
1046 | * positives due to ISA bus float. The assumption is that | |
1047 | * 0x80 is a non-existent port; which should be safe since | |
1048 | * include/asm/io.h also makes this assumption. | |
1049 | */ | |
1050 | scratch = serial_inp(up, UART_IER); | |
1051 | serial_outp(up, UART_IER, 0); | |
1052 | #ifdef __i386__ | |
1053 | outb(0xff, 0x080); | |
1054 | #endif | |
1055 | scratch2 = serial_inp(up, UART_IER); | |
1056 | serial_outp(up, UART_IER, 0x0f); | |
1057 | #ifdef __i386__ | |
1058 | outb(0, 0x080); | |
1059 | #endif | |
1060 | scratch3 = serial_inp(up, UART_IER); | |
1061 | serial_outp(up, UART_IER, scratch); | |
1062 | if (scratch2 != 0 || scratch3 != 0x0F) | |
1063 | goto out; /* We failed; there's nothing here */ | |
1064 | } | |
1065 | ||
1066 | save_mcr = serial_in(up, UART_MCR); | |
1067 | save_lcr = serial_in(up, UART_LCR); | |
1068 | ||
1069 | /* | |
1070 | * Check to see if a UART is really there. Certain broken | |
1071 | * internal modems based on the Rockwell chipset fail this | |
1072 | * test, because they apparently don't implement the loopback | |
1073 | * test mode. So this test is skipped on the COM 1 through | |
1074 | * COM 4 ports. This *should* be safe, since no board | |
1075 | * manufacturer would be stupid enough to design a board | |
1076 | * that conflicts with COM 1-4 --- we hope! | |
1077 | */ | |
ce8337cb | 1078 | if (!(up->port.flags & UPF_SKIP_TEST)) { |
1da177e4 LT |
1079 | serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); |
1080 | status1 = serial_inp(up, UART_MSR) & 0xF0; | |
1081 | serial_outp(up, UART_MCR, save_mcr); | |
1082 | if (status1 != 0x90) | |
1083 | goto out; /* We failed loopback test */ | |
1084 | } | |
1085 | serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ | |
1086 | serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ | |
1087 | serial_outp(up, UART_LCR, 0); | |
1088 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1089 | scratch = serial_in(up, UART_IIR) >> 6; | |
1090 | switch (scratch) { | |
1091 | case 0: | |
1092 | up->port.type = PORT_16450; | |
1093 | break; | |
1094 | case 1: | |
1095 | up->port.type = PORT_UNKNOWN; | |
1096 | break; | |
1097 | case 2: | |
1098 | up->port.type = PORT_16550; | |
1099 | break; | |
1100 | case 3: | |
1101 | up->port.type = PORT_16550A; | |
1102 | break; | |
1103 | } | |
1104 | if (up->port.type == PORT_16550A) { | |
1105 | /* Check for Startech UART's */ | |
1106 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
1107 | if (serial_in(up, UART_EFR) == 0) { | |
1108 | up->port.type = PORT_16650; | |
1109 | } else { | |
1110 | serial_outp(up, UART_LCR, 0xBF); | |
1111 | if (serial_in(up, UART_EFR) == 0) | |
1112 | up->port.type = PORT_16650V2; | |
1113 | } | |
1114 | } | |
1115 | if (up->port.type == PORT_16550A) { | |
1116 | /* Check for TI 16750 */ | |
1117 | serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); | |
1118 | serial_outp(up, UART_FCR, | |
1119 | UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1120 | scratch = serial_in(up, UART_IIR) >> 5; | |
1121 | if (scratch == 7) { | |
1122 | /* | |
1123 | * If this is a 16750, and not a cheap UART | |
1124 | * clone, then it should only go into 64 byte | |
1125 | * mode if the UART_FCR7_64BYTE bit was set | |
1126 | * while UART_LCR_DLAB was latched. | |
1127 | */ | |
1128 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1129 | serial_outp(up, UART_LCR, 0); | |
1130 | serial_outp(up, UART_FCR, | |
1131 | UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1132 | scratch = serial_in(up, UART_IIR) >> 5; | |
1133 | if (scratch == 6) | |
1134 | up->port.type = PORT_16750; | |
1135 | } | |
1136 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1137 | } | |
1138 | serial_outp(up, UART_LCR, save_lcr); | |
1139 | if (up->port.type == PORT_16450) { | |
1140 | scratch = serial_in(up, UART_SCR); | |
1141 | serial_outp(up, UART_SCR, 0xa5); | |
1142 | status1 = serial_in(up, UART_SCR); | |
1143 | serial_outp(up, UART_SCR, 0x5a); | |
1144 | status2 = serial_in(up, UART_SCR); | |
1145 | serial_outp(up, UART_SCR, scratch); | |
1146 | ||
1147 | if ((status1 != 0xa5) || (status2 != 0x5a)) | |
1148 | up->port.type = PORT_8250; | |
1149 | } | |
1150 | ||
1151 | up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; | |
1152 | ||
1153 | if (up->port.type == PORT_UNKNOWN) | |
1154 | goto out; | |
1155 | up->type_probed = up->port.type; /* XXX */ | |
1156 | ||
1157 | /* | |
1158 | * Reset the UART. | |
1159 | */ | |
1160 | #ifdef CONFIG_SERIAL_8250_RSA | |
1161 | if (up->port.type == PORT_RSA) | |
1162 | serial_outp(up, UART_RSA_FRR, 0); | |
1163 | #endif | |
1164 | serial_outp(up, UART_MCR, save_mcr); | |
1165 | serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | | |
1166 | UART_FCR_CLEAR_RCVR | | |
1167 | UART_FCR_CLEAR_XMIT)); | |
1168 | serial_outp(up, UART_FCR, 0); | |
1169 | (void)serial_in(up, UART_RX); | |
1170 | serial_outp(up, UART_IER, 0); | |
1171 | ||
1172 | out: | |
1173 | spin_unlock_irqrestore(&up->port.lock, flags); | |
1174 | } | |
1175 | ||
1176 | static struct uart_driver sunsu_reg = { | |
1177 | .owner = THIS_MODULE, | |
32039f49 | 1178 | .driver_name = "sunsu", |
1da177e4 LT |
1179 | .dev_name = "ttyS", |
1180 | .major = TTY_MAJOR, | |
1181 | }; | |
1182 | ||
9671f099 | 1183 | static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) |
1da177e4 | 1184 | { |
623f41eb | 1185 | int quot, baud; |
1da177e4 LT |
1186 | #ifdef CONFIG_SERIO |
1187 | struct serio *serio; | |
1188 | #endif | |
1189 | ||
623f41eb | 1190 | if (up->su_type == SU_PORT_KBD) { |
1da177e4 | 1191 | up->cflag = B1200 | CS8 | CLOCAL | CREAD; |
623f41eb DM |
1192 | baud = 1200; |
1193 | } else { | |
1da177e4 | 1194 | up->cflag = B4800 | CS8 | CLOCAL | CREAD; |
623f41eb DM |
1195 | baud = 4800; |
1196 | } | |
1197 | quot = up->port.uartclk / (16 * baud); | |
1da177e4 LT |
1198 | |
1199 | sunsu_autoconfig(up); | |
1200 | if (up->port.type == PORT_UNKNOWN) | |
1708d242 | 1201 | return -ENODEV; |
1da177e4 | 1202 | |
4f1296a5 | 1203 | printk("%s: %s port at %llx, irq %u\n", |
2dc11581 | 1204 | up->port.dev->of_node->full_name, |
c964521c | 1205 | (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", |
4f1296a5 DM |
1206 | (unsigned long long) up->port.mapbase, |
1207 | up->port.irq); | |
c964521c | 1208 | |
1da177e4 | 1209 | #ifdef CONFIG_SERIO |
1708d242 DM |
1210 | serio = &up->serio; |
1211 | serio->port_data = up; | |
1da177e4 | 1212 | |
1708d242 DM |
1213 | serio->id.type = SERIO_RS232; |
1214 | if (up->su_type == SU_PORT_KBD) { | |
1215 | serio->id.proto = SERIO_SUNKBD; | |
1216 | strlcpy(serio->name, "sukbd", sizeof(serio->name)); | |
1da177e4 | 1217 | } else { |
1708d242 DM |
1218 | serio->id.proto = SERIO_SUN; |
1219 | serio->id.extra = 1; | |
1220 | strlcpy(serio->name, "sums", sizeof(serio->name)); | |
1da177e4 | 1221 | } |
1708d242 DM |
1222 | strlcpy(serio->phys, |
1223 | (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), | |
1224 | sizeof(serio->phys)); | |
1225 | ||
1226 | serio->write = sunsu_serio_write; | |
1227 | serio->open = sunsu_serio_open; | |
1228 | serio->close = sunsu_serio_close; | |
1229 | serio->dev.parent = up->port.dev; | |
1230 | ||
1231 | serio_register_port(serio); | |
1da177e4 LT |
1232 | #endif |
1233 | ||
623f41eb DM |
1234 | sunsu_change_speed(&up->port, up->cflag, 0, quot); |
1235 | ||
1da177e4 LT |
1236 | sunsu_startup(&up->port); |
1237 | return 0; | |
1238 | } | |
1239 | ||
1240 | /* | |
1241 | * ------------------------------------------------------------ | |
1242 | * Serial console driver | |
1243 | * ------------------------------------------------------------ | |
1244 | */ | |
1245 | ||
1246 | #ifdef CONFIG_SERIAL_SUNSU_CONSOLE | |
1247 | ||
1248 | #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) | |
1249 | ||
1250 | /* | |
1251 | * Wait for transmitter & holding register to empty | |
1252 | */ | |
1253 | static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) | |
1254 | { | |
1255 | unsigned int status, tmout = 10000; | |
1256 | ||
1257 | /* Wait up to 10ms for the character(s) to be sent. */ | |
1258 | do { | |
1259 | status = serial_in(up, UART_LSR); | |
1260 | ||
1261 | if (status & UART_LSR_BI) | |
1262 | up->lsr_break_flag = UART_LSR_BI; | |
1263 | ||
1264 | if (--tmout == 0) | |
1265 | break; | |
1266 | udelay(1); | |
1267 | } while ((status & BOTH_EMPTY) != BOTH_EMPTY); | |
1268 | ||
1269 | /* Wait up to 1s for flow control if necessary */ | |
ce8337cb | 1270 | if (up->port.flags & UPF_CONS_FLOW) { |
1da177e4 LT |
1271 | tmout = 1000000; |
1272 | while (--tmout && | |
1273 | ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) | |
1274 | udelay(1); | |
1275 | } | |
1276 | } | |
1277 | ||
d358788f RK |
1278 | static void sunsu_console_putchar(struct uart_port *port, int ch) |
1279 | { | |
1280 | struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; | |
1281 | ||
1282 | wait_for_xmitr(up); | |
1283 | serial_out(up, UART_TX, ch); | |
1284 | } | |
1285 | ||
1da177e4 LT |
1286 | /* |
1287 | * Print a string to the serial port trying not to disturb | |
1288 | * any possible real use of the port... | |
1289 | */ | |
1290 | static void sunsu_console_write(struct console *co, const char *s, | |
1291 | unsigned int count) | |
1292 | { | |
1293 | struct uart_sunsu_port *up = &sunsu_ports[co->index]; | |
f3c681c0 | 1294 | unsigned long flags; |
1da177e4 | 1295 | unsigned int ier; |
f3c681c0 DM |
1296 | int locked = 1; |
1297 | ||
1298 | local_irq_save(flags); | |
1299 | if (up->port.sysrq) { | |
1300 | locked = 0; | |
1301 | } else if (oops_in_progress) { | |
1302 | locked = spin_trylock(&up->port.lock); | |
1303 | } else | |
1304 | spin_lock(&up->port.lock); | |
1da177e4 LT |
1305 | |
1306 | /* | |
1307 | * First save the UER then disable the interrupts | |
1308 | */ | |
1309 | ier = serial_in(up, UART_IER); | |
1310 | serial_out(up, UART_IER, 0); | |
1311 | ||
d358788f | 1312 | uart_console_write(&up->port, s, count, sunsu_console_putchar); |
1da177e4 LT |
1313 | |
1314 | /* | |
1315 | * Finally, wait for transmitter to become empty | |
1316 | * and restore the IER | |
1317 | */ | |
1318 | wait_for_xmitr(up); | |
1319 | serial_out(up, UART_IER, ier); | |
f3c681c0 DM |
1320 | |
1321 | if (locked) | |
1322 | spin_unlock(&up->port.lock); | |
1323 | local_irq_restore(flags); | |
1da177e4 LT |
1324 | } |
1325 | ||
1326 | /* | |
1327 | * Setup initial baud/bits/parity. We do two things here: | |
1328 | * - construct a cflag setting for the first su_open() | |
1329 | * - initialize the serial port | |
1330 | * Return non-zero if we didn't find a serial port. | |
1331 | */ | |
90a660a4 | 1332 | static int __init sunsu_console_setup(struct console *co, char *options) |
1da177e4 | 1333 | { |
be24656a DM |
1334 | static struct ktermios dummy; |
1335 | struct ktermios termios; | |
1da177e4 | 1336 | struct uart_port *port; |
1da177e4 LT |
1337 | |
1338 | printk("Console: ttyS%d (SU)\n", | |
1339 | (sunsu_reg.minor - 64) + co->index); | |
1340 | ||
cb29529e TK |
1341 | if (co->index > nr_inst) |
1342 | return -ENODEV; | |
1da177e4 LT |
1343 | port = &sunsu_ports[co->index].port; |
1344 | ||
1345 | /* | |
1346 | * Temporary fix. | |
1347 | */ | |
1348 | spin_lock_init(&port->lock); | |
1349 | ||
be24656a | 1350 | /* Get firmware console settings. */ |
2dc11581 | 1351 | sunserial_console_termios(co, port->dev->of_node); |
1da177e4 | 1352 | |
be24656a DM |
1353 | memset(&termios, 0, sizeof(struct ktermios)); |
1354 | termios.c_cflag = co->cflag; | |
1355 | port->mctrl |= TIOCM_DTR; | |
1356 | port->ops->set_termios(port, &termios, &dummy); | |
1357 | ||
1358 | return 0; | |
1da177e4 LT |
1359 | } |
1360 | ||
90a660a4 | 1361 | static struct console sunsu_console = { |
1da177e4 LT |
1362 | .name = "ttyS", |
1363 | .write = sunsu_console_write, | |
1364 | .device = uart_console_device, | |
1365 | .setup = sunsu_console_setup, | |
1366 | .flags = CON_PRINTBUFFER, | |
1367 | .index = -1, | |
1368 | .data = &sunsu_reg, | |
1369 | }; | |
1da177e4 LT |
1370 | |
1371 | /* | |
1372 | * Register console. | |
1373 | */ | |
1374 | ||
c73fcc84 | 1375 | static inline struct console *SUNSU_CONSOLE(void) |
1da177e4 | 1376 | { |
90a660a4 | 1377 | return &sunsu_console; |
1da177e4 LT |
1378 | } |
1379 | #else | |
c73fcc84 | 1380 | #define SUNSU_CONSOLE() (NULL) |
1da177e4 LT |
1381 | #define sunsu_serial_console_init() do { } while (0) |
1382 | #endif | |
1383 | ||
9671f099 | 1384 | static enum su_type su_get_type(struct device_node *dp) |
1da177e4 | 1385 | { |
1708d242 | 1386 | struct device_node *ap = of_find_node_by_path("/aliases"); |
1da177e4 | 1387 | |
1708d242 | 1388 | if (ap) { |
ccf0dec6 SR |
1389 | const char *keyb = of_get_property(ap, "keyboard", NULL); |
1390 | const char *ms = of_get_property(ap, "mouse", NULL); | |
1da177e4 | 1391 | |
1708d242 DM |
1392 | if (keyb) { |
1393 | if (dp == of_find_node_by_path(keyb)) | |
1394 | return SU_PORT_KBD; | |
1395 | } | |
1396 | if (ms) { | |
1397 | if (dp == of_find_node_by_path(ms)) | |
1398 | return SU_PORT_MS; | |
1399 | } | |
1400 | } | |
1da177e4 | 1401 | |
1708d242 DM |
1402 | return SU_PORT_PORT; |
1403 | } | |
1da177e4 | 1404 | |
9671f099 | 1405 | static int su_probe(struct platform_device *op) |
1708d242 | 1406 | { |
61c7a080 | 1407 | struct device_node *dp = op->dev.of_node; |
1708d242 DM |
1408 | struct uart_sunsu_port *up; |
1409 | struct resource *rp; | |
91d1ed1a | 1410 | enum su_type type; |
1917d17b | 1411 | bool ignore_line; |
1708d242 | 1412 | int err; |
1da177e4 | 1413 | |
91d1ed1a DM |
1414 | type = su_get_type(dp); |
1415 | if (type == SU_PORT_PORT) { | |
cb29529e | 1416 | if (nr_inst >= UART_NR) |
91d1ed1a | 1417 | return -EINVAL; |
cb29529e | 1418 | up = &sunsu_ports[nr_inst]; |
91d1ed1a DM |
1419 | } else { |
1420 | up = kzalloc(sizeof(*up), GFP_KERNEL); | |
1421 | if (!up) | |
1422 | return -ENOMEM; | |
1423 | } | |
1da177e4 | 1424 | |
cb29529e | 1425 | up->port.line = nr_inst; |
1da177e4 | 1426 | |
1708d242 | 1427 | spin_lock_init(&up->port.lock); |
1da177e4 | 1428 | |
91d1ed1a | 1429 | up->su_type = type; |
f5deb807 | 1430 | |
1708d242 | 1431 | rp = &op->resource[0]; |
91d1ed1a | 1432 | up->port.mapbase = rp->start; |
28f65c11 | 1433 | up->reg_size = resource_size(rp); |
1708d242 | 1434 | up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); |
91d1ed1a DM |
1435 | if (!up->port.membase) { |
1436 | if (type != SU_PORT_PORT) | |
1437 | kfree(up); | |
1708d242 | 1438 | return -ENOMEM; |
91d1ed1a | 1439 | } |
1ddb7c98 | 1440 | |
1636f8ac | 1441 | up->port.irq = op->archdata.irqs[0]; |
1da177e4 | 1442 | |
1708d242 | 1443 | up->port.dev = &op->dev; |
1da177e4 | 1444 | |
1708d242 DM |
1445 | up->port.type = PORT_UNKNOWN; |
1446 | up->port.uartclk = (SU_BASE_BAUD * 16); | |
1da177e4 | 1447 | |
1708d242 DM |
1448 | err = 0; |
1449 | if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { | |
1450 | err = sunsu_kbd_ms_init(up); | |
91d1ed1a | 1451 | if (err) { |
c4a3987f JL |
1452 | of_iounmap(&op->resource[0], |
1453 | up->port.membase, up->reg_size); | |
91d1ed1a | 1454 | kfree(up); |
c4a3987f | 1455 | return err; |
91d1ed1a DM |
1456 | } |
1457 | dev_set_drvdata(&op->dev, up); | |
a1d22d32 | 1458 | |
cb29529e TK |
1459 | nr_inst++; |
1460 | ||
a1d22d32 | 1461 | return 0; |
1da177e4 LT |
1462 | } |
1463 | ||
1708d242 | 1464 | up->port.flags |= UPF_BOOT_AUTOCONF; |
1da177e4 | 1465 | |
1708d242 | 1466 | sunsu_autoconfig(up); |
1da177e4 | 1467 | |
1708d242 DM |
1468 | err = -ENODEV; |
1469 | if (up->port.type == PORT_UNKNOWN) | |
1470 | goto out_unmap; | |
1da177e4 | 1471 | |
1708d242 | 1472 | up->port.ops = &sunsu_pops; |
1da177e4 | 1473 | |
1917d17b DM |
1474 | ignore_line = false; |
1475 | if (!strcmp(dp->name, "rsc-console") || | |
1476 | !strcmp(dp->name, "lom-console")) | |
1477 | ignore_line = true; | |
1478 | ||
c73fcc84 | 1479 | sunserial_console_match(SUNSU_CONSOLE(), dp, |
4e3533d0 | 1480 | &sunsu_reg, up->port.line, |
1917d17b | 1481 | ignore_line); |
1708d242 DM |
1482 | err = uart_add_one_port(&sunsu_reg, &up->port); |
1483 | if (err) | |
1484 | goto out_unmap; | |
1da177e4 | 1485 | |
1708d242 | 1486 | dev_set_drvdata(&op->dev, up); |
1da177e4 | 1487 | |
cb29529e | 1488 | nr_inst++; |
1da177e4 | 1489 | |
1708d242 DM |
1490 | return 0; |
1491 | ||
1492 | out_unmap: | |
e3a411a3 | 1493 | of_iounmap(&op->resource[0], up->port.membase, up->reg_size); |
1708d242 | 1494 | return err; |
1da177e4 LT |
1495 | } |
1496 | ||
ae8d8a14 | 1497 | static int su_remove(struct platform_device *op) |
1da177e4 | 1498 | { |
e3a411a3 | 1499 | struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); |
9616ff43 | 1500 | bool kbdms = false; |
1da177e4 | 1501 | |
1708d242 | 1502 | if (up->su_type == SU_PORT_MS || |
9616ff43 DM |
1503 | up->su_type == SU_PORT_KBD) |
1504 | kbdms = true; | |
1505 | ||
1506 | if (kbdms) { | |
1708d242 DM |
1507 | #ifdef CONFIG_SERIO |
1508 | serio_unregister_port(&up->serio); | |
1509 | #endif | |
9616ff43 | 1510 | } else if (up->port.type != PORT_UNKNOWN) |
1708d242 | 1511 | uart_remove_one_port(&sunsu_reg, &up->port); |
91d1ed1a | 1512 | |
65da4d81 | 1513 | if (up->port.membase) |
e3a411a3 | 1514 | of_iounmap(&op->resource[0], up->port.membase, up->reg_size); |
65da4d81 | 1515 | |
9616ff43 DM |
1516 | if (kbdms) |
1517 | kfree(up); | |
1518 | ||
e3a411a3 | 1519 | dev_set_drvdata(&op->dev, NULL); |
1da177e4 | 1520 | |
1708d242 DM |
1521 | return 0; |
1522 | } | |
1da177e4 | 1523 | |
fd098316 | 1524 | static const struct of_device_id su_match[] = { |
1708d242 DM |
1525 | { |
1526 | .name = "su", | |
1527 | }, | |
1528 | { | |
1529 | .name = "su_pnp", | |
1530 | }, | |
1531 | { | |
1532 | .name = "serial", | |
1533 | .compatible = "su", | |
1534 | }, | |
8301d386 DM |
1535 | { |
1536 | .type = "serial", | |
1537 | .compatible = "su", | |
1538 | }, | |
1708d242 DM |
1539 | {}, |
1540 | }; | |
1541 | MODULE_DEVICE_TABLE(of, su_match); | |
1da177e4 | 1542 | |
793218df | 1543 | static struct platform_driver su_driver = { |
4018294b GL |
1544 | .driver = { |
1545 | .name = "su", | |
1546 | .owner = THIS_MODULE, | |
1547 | .of_match_table = su_match, | |
1548 | }, | |
1708d242 | 1549 | .probe = su_probe, |
2d47b716 | 1550 | .remove = su_remove, |
1708d242 | 1551 | }; |
1da177e4 | 1552 | |
1708d242 DM |
1553 | static int __init sunsu_init(void) |
1554 | { | |
1555 | struct device_node *dp; | |
1556 | int err; | |
58d784a5 | 1557 | int num_uart = 0; |
1da177e4 | 1558 | |
1708d242 DM |
1559 | for_each_node_by_name(dp, "su") { |
1560 | if (su_get_type(dp) == SU_PORT_PORT) | |
1561 | num_uart++; | |
1da177e4 | 1562 | } |
1708d242 DM |
1563 | for_each_node_by_name(dp, "su_pnp") { |
1564 | if (su_get_type(dp) == SU_PORT_PORT) | |
1565 | num_uart++; | |
1566 | } | |
1567 | for_each_node_by_name(dp, "serial") { | |
1568 | if (of_device_is_compatible(dp, "su")) { | |
1569 | if (su_get_type(dp) == SU_PORT_PORT) | |
1570 | num_uart++; | |
1571 | } | |
1da177e4 | 1572 | } |
8301d386 DM |
1573 | for_each_node_by_type(dp, "serial") { |
1574 | if (of_device_is_compatible(dp, "su")) { | |
1575 | if (su_get_type(dp) == SU_PORT_PORT) | |
1576 | num_uart++; | |
1577 | } | |
1578 | } | |
1da177e4 | 1579 | |
1708d242 | 1580 | if (num_uart) { |
58d784a5 | 1581 | err = sunserial_register_minors(&sunsu_reg, num_uart); |
1708d242 DM |
1582 | if (err) |
1583 | return err; | |
1708d242 | 1584 | } |
1da177e4 | 1585 | |
793218df | 1586 | err = platform_driver_register(&su_driver); |
1708d242 | 1587 | if (err && num_uart) |
58d784a5 | 1588 | sunserial_unregister_minors(&sunsu_reg, num_uart); |
1da177e4 | 1589 | |
1708d242 | 1590 | return err; |
1da177e4 LT |
1591 | } |
1592 | ||
1593 | static void __exit sunsu_exit(void) | |
1594 | { | |
58d784a5 MH |
1595 | if (sunsu_reg.nr) |
1596 | sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); | |
1da177e4 LT |
1597 | } |
1598 | ||
1708d242 | 1599 | module_init(sunsu_init); |
1da177e4 | 1600 | module_exit(sunsu_exit); |
9efc3715 DM |
1601 | |
1602 | MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); | |
1603 | MODULE_DESCRIPTION("Sun SU serial port driver"); | |
1604 | MODULE_VERSION("2.0"); | |
9a2a9bb2 | 1605 | MODULE_LICENSE("GPL"); |