]>
Commit | Line | Data |
---|---|---|
e3b3d0f5 | 1 | // SPDX-License-Identifier: GPL-1.0+ |
705b6c7b | 2 | /* |
705b6c7b PF |
3 | * Device driver for Microgate SyncLink GT serial adapters. |
4 | * | |
5 | * written by Paul Fulghum for Microgate Corporation | |
6 | * paulkf@microgate.com | |
7 | * | |
8 | * Microgate and SyncLink are trademarks of Microgate Corporation | |
9 | * | |
705b6c7b PF |
10 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
11 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
12 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
13 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
14 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
15 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
16 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
17 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
18 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
19 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
20 | * OF THE POSSIBILITY OF SUCH DAMAGE. | |
21 | */ | |
22 | ||
23 | /* | |
24 | * DEBUG OUTPUT DEFINITIONS | |
25 | * | |
26 | * uncomment lines below to enable specific types of debug output | |
27 | * | |
28 | * DBGINFO information - most verbose output | |
29 | * DBGERR serious errors | |
30 | * DBGBH bottom half service routine debugging | |
31 | * DBGISR interrupt service routine debugging | |
32 | * DBGDATA output receive and transmit data | |
33 | * DBGTBUF output transmit DMA buffers and registers | |
34 | * DBGRBUF output receive DMA buffers and registers | |
35 | */ | |
36 | ||
37 | #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt | |
38 | #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt | |
39 | #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt | |
40 | #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt | |
41 | #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) | |
f602501d AC |
42 | /*#define DBGTBUF(info) dump_tbufs(info)*/ |
43 | /*#define DBGRBUF(info) dump_rbufs(info)*/ | |
705b6c7b PF |
44 | |
45 | ||
705b6c7b | 46 | #include <linux/module.h> |
705b6c7b PF |
47 | #include <linux/errno.h> |
48 | #include <linux/signal.h> | |
49 | #include <linux/sched.h> | |
50 | #include <linux/timer.h> | |
51 | #include <linux/interrupt.h> | |
52 | #include <linux/pci.h> | |
53 | #include <linux/tty.h> | |
54 | #include <linux/tty_flip.h> | |
55 | #include <linux/serial.h> | |
56 | #include <linux/major.h> | |
57 | #include <linux/string.h> | |
58 | #include <linux/fcntl.h> | |
59 | #include <linux/ptrace.h> | |
60 | #include <linux/ioport.h> | |
61 | #include <linux/mm.h> | |
a18c56e5 | 62 | #include <linux/seq_file.h> |
705b6c7b PF |
63 | #include <linux/slab.h> |
64 | #include <linux/netdevice.h> | |
65 | #include <linux/vmalloc.h> | |
66 | #include <linux/init.h> | |
67 | #include <linux/delay.h> | |
68 | #include <linux/ioctl.h> | |
69 | #include <linux/termios.h> | |
70 | #include <linux/bitops.h> | |
71 | #include <linux/workqueue.h> | |
72 | #include <linux/hdlc.h> | |
3dd1247f | 73 | #include <linux/synclink.h> |
705b6c7b | 74 | |
705b6c7b PF |
75 | #include <asm/io.h> |
76 | #include <asm/irq.h> | |
77 | #include <asm/dma.h> | |
78 | #include <asm/types.h> | |
7c0f6ba6 | 79 | #include <linux/uaccess.h> |
705b6c7b | 80 | |
af69c7f9 PF |
81 | #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) |
82 | #define SYNCLINK_GENERIC_HDLC 1 | |
83 | #else | |
84 | #define SYNCLINK_GENERIC_HDLC 0 | |
705b6c7b PF |
85 | #endif |
86 | ||
87 | /* | |
88 | * module identification | |
89 | */ | |
90 | static char *driver_name = "SyncLink GT"; | |
076fe303 | 91 | static char *slgt_driver_name = "synclink_gt"; |
705b6c7b PF |
92 | static char *tty_dev_prefix = "ttySLG"; |
93 | MODULE_LICENSE("GPL"); | |
94 | #define MGSL_MAGIC 0x5401 | |
a077c1a0 | 95 | #define MAX_DEVICES 32 |
705b6c7b | 96 | |
0846b762 | 97 | static const struct pci_device_id pci_table[] = { |
705b6c7b | 98 | {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
6f84be84 | 99 | {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
705b6c7b PF |
100 | {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
101 | {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, | |
102 | {0,}, /* terminate list */ | |
103 | }; | |
104 | MODULE_DEVICE_TABLE(pci, pci_table); | |
105 | ||
106 | static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); | |
107 | static void remove_one(struct pci_dev *dev); | |
108 | static struct pci_driver pci_driver = { | |
109 | .name = "synclink_gt", | |
110 | .id_table = pci_table, | |
111 | .probe = init_one, | |
91116cba | 112 | .remove = remove_one, |
705b6c7b PF |
113 | }; |
114 | ||
0fab6de0 | 115 | static bool pci_registered; |
705b6c7b PF |
116 | |
117 | /* | |
118 | * module configuration and status | |
119 | */ | |
120 | static struct slgt_info *slgt_device_list; | |
121 | static int slgt_device_count; | |
122 | ||
123 | static int ttymajor; | |
124 | static int debug_level; | |
125 | static int maxframe[MAX_DEVICES]; | |
705b6c7b PF |
126 | |
127 | module_param(ttymajor, int, 0); | |
128 | module_param(debug_level, int, 0); | |
129 | module_param_array(maxframe, int, NULL, 0); | |
705b6c7b PF |
130 | |
131 | MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); | |
132 | MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); | |
133 | MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); | |
705b6c7b PF |
134 | |
135 | /* | |
136 | * tty support and callbacks | |
137 | */ | |
705b6c7b PF |
138 | static struct tty_driver *serial_driver; |
139 | ||
140 | static int open(struct tty_struct *tty, struct file * filp); | |
141 | static void close(struct tty_struct *tty, struct file * filp); | |
142 | static void hangup(struct tty_struct *tty); | |
606d099c | 143 | static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); |
705b6c7b PF |
144 | |
145 | static int write(struct tty_struct *tty, const unsigned char *buf, int count); | |
55da7789 | 146 | static int put_char(struct tty_struct *tty, unsigned char ch); |
705b6c7b PF |
147 | static void send_xchar(struct tty_struct *tty, char ch); |
148 | static void wait_until_sent(struct tty_struct *tty, int timeout); | |
149 | static int write_room(struct tty_struct *tty); | |
150 | static void flush_chars(struct tty_struct *tty); | |
151 | static void flush_buffer(struct tty_struct *tty); | |
152 | static void tx_hold(struct tty_struct *tty); | |
153 | static void tx_release(struct tty_struct *tty); | |
154 | ||
6caa76b7 | 155 | static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); |
705b6c7b PF |
156 | static int chars_in_buffer(struct tty_struct *tty); |
157 | static void throttle(struct tty_struct * tty); | |
158 | static void unthrottle(struct tty_struct * tty); | |
9e98966c | 159 | static int set_break(struct tty_struct *tty, int break_state); |
705b6c7b PF |
160 | |
161 | /* | |
162 | * generic HDLC support and callbacks | |
163 | */ | |
af69c7f9 | 164 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
165 | #define dev_to_port(D) (dev_to_hdlc(D)->priv) |
166 | static void hdlcdev_tx_done(struct slgt_info *info); | |
167 | static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); | |
168 | static int hdlcdev_init(struct slgt_info *info); | |
169 | static void hdlcdev_exit(struct slgt_info *info); | |
170 | #endif | |
171 | ||
172 | ||
173 | /* | |
174 | * device specific structures, macros and functions | |
175 | */ | |
176 | ||
177 | #define SLGT_MAX_PORTS 4 | |
178 | #define SLGT_REG_SIZE 256 | |
179 | ||
0080b7aa PF |
180 | /* |
181 | * conditional wait facility | |
182 | */ | |
183 | struct cond_wait { | |
184 | struct cond_wait *next; | |
185 | wait_queue_head_t q; | |
ac6424b9 | 186 | wait_queue_entry_t wait; |
0080b7aa PF |
187 | unsigned int data; |
188 | }; | |
189 | static void init_cond_wait(struct cond_wait *w, unsigned int data); | |
190 | static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); | |
191 | static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); | |
192 | static void flush_cond_wait(struct cond_wait **head); | |
193 | ||
705b6c7b PF |
194 | /* |
195 | * DMA buffer descriptor and access macros | |
196 | */ | |
197 | struct slgt_desc | |
198 | { | |
51ef9c57 AV |
199 | __le16 count; |
200 | __le16 status; | |
201 | __le32 pbuf; /* physical address of data buffer */ | |
202 | __le32 next; /* physical address of next descriptor */ | |
705b6c7b PF |
203 | |
204 | /* driver book keeping */ | |
205 | char *buf; /* virtual address of data buffer */ | |
206 | unsigned int pdesc; /* physical address of this descriptor */ | |
207 | dma_addr_t buf_dma_addr; | |
403214d0 | 208 | unsigned short buf_count; |
705b6c7b PF |
209 | }; |
210 | ||
211 | #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) | |
212 | #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) | |
213 | #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) | |
214 | #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) | |
5ba5a5d2 | 215 | #define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) |
705b6c7b PF |
216 | #define desc_count(a) (le16_to_cpu((a).count)) |
217 | #define desc_status(a) (le16_to_cpu((a).status)) | |
218 | #define desc_complete(a) (le16_to_cpu((a).status) & BIT15) | |
219 | #define desc_eof(a) (le16_to_cpu((a).status) & BIT2) | |
220 | #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) | |
221 | #define desc_abort(a) (le16_to_cpu((a).status) & BIT0) | |
222 | #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) | |
223 | ||
224 | struct _input_signal_events { | |
225 | int ri_up; | |
226 | int ri_down; | |
227 | int dsr_up; | |
228 | int dsr_down; | |
229 | int dcd_up; | |
230 | int dcd_down; | |
231 | int cts_up; | |
232 | int cts_down; | |
233 | }; | |
234 | ||
235 | /* | |
236 | * device instance data structure | |
237 | */ | |
238 | struct slgt_info { | |
239 | void *if_ptr; /* General purpose pointer (used by SPPP) */ | |
8fb06c77 | 240 | struct tty_port port; |
705b6c7b PF |
241 | |
242 | struct slgt_info *next_device; /* device list link */ | |
243 | ||
244 | int magic; | |
705b6c7b PF |
245 | |
246 | char device_name[25]; | |
247 | struct pci_dev *pdev; | |
248 | ||
249 | int port_count; /* count of ports on adapter */ | |
250 | int adapter_num; /* adapter instance number */ | |
251 | int port_num; /* port instance number */ | |
252 | ||
253 | /* array of pointers to port contexts on this adapter */ | |
254 | struct slgt_info *port_array[SLGT_MAX_PORTS]; | |
255 | ||
705b6c7b | 256 | int line; /* tty line instance number */ |
705b6c7b PF |
257 | |
258 | struct mgsl_icount icount; | |
259 | ||
705b6c7b PF |
260 | int timeout; |
261 | int x_char; /* xon/xoff character */ | |
705b6c7b PF |
262 | unsigned int read_status_mask; |
263 | unsigned int ignore_status_mask; | |
264 | ||
705b6c7b PF |
265 | wait_queue_head_t status_event_wait_q; |
266 | wait_queue_head_t event_wait_q; | |
267 | struct timer_list tx_timer; | |
268 | struct timer_list rx_timer; | |
269 | ||
0080b7aa PF |
270 | unsigned int gpio_present; |
271 | struct cond_wait *gpio_wait_q; | |
272 | ||
705b6c7b PF |
273 | spinlock_t lock; /* spinlock for synchronizing with ISR */ |
274 | ||
275 | struct work_struct task; | |
276 | u32 pending_bh; | |
0fab6de0 JP |
277 | bool bh_requested; |
278 | bool bh_running; | |
705b6c7b PF |
279 | |
280 | int isr_overflow; | |
0fab6de0 JP |
281 | bool irq_requested; /* true if IRQ requested */ |
282 | bool irq_occurred; /* for diagnostics use */ | |
705b6c7b PF |
283 | |
284 | /* device configuration */ | |
285 | ||
286 | unsigned int bus_type; | |
287 | unsigned int irq_level; | |
288 | unsigned long irq_flags; | |
289 | ||
290 | unsigned char __iomem * reg_addr; /* memory mapped registers address */ | |
291 | u32 phys_reg_addr; | |
0fab6de0 | 292 | bool reg_addr_requested; |
705b6c7b PF |
293 | |
294 | MGSL_PARAMS params; /* communications parameters */ | |
295 | u32 idle_mode; | |
296 | u32 max_frame_size; /* as set by device config */ | |
297 | ||
814dae03 | 298 | unsigned int rbuf_fill_level; |
5ba5a5d2 | 299 | unsigned int rx_pio; |
705b6c7b | 300 | unsigned int if_mode; |
1f80769f | 301 | unsigned int base_clock; |
9807224f PF |
302 | unsigned int xsync; |
303 | unsigned int xctrl; | |
705b6c7b PF |
304 | |
305 | /* device status */ | |
306 | ||
0fab6de0 JP |
307 | bool rx_enabled; |
308 | bool rx_restart; | |
705b6c7b | 309 | |
0fab6de0 JP |
310 | bool tx_enabled; |
311 | bool tx_active; | |
705b6c7b PF |
312 | |
313 | unsigned char signals; /* serial signal states */ | |
2641dfd9 | 314 | int init_error; /* initialization error */ |
705b6c7b PF |
315 | |
316 | unsigned char *tx_buf; | |
317 | int tx_count; | |
318 | ||
a6b68a69 | 319 | char *flag_buf; |
0fab6de0 | 320 | bool drop_rts_on_tx_done; |
705b6c7b PF |
321 | struct _input_signal_events input_signal_events; |
322 | ||
323 | int dcd_chkcount; /* check counts to prevent */ | |
324 | int cts_chkcount; /* too many IRQs if a signal */ | |
325 | int dsr_chkcount; /* is floating */ | |
326 | int ri_chkcount; | |
327 | ||
328 | char *bufs; /* virtual address of DMA buffer lists */ | |
329 | dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ | |
330 | ||
331 | unsigned int rbuf_count; | |
332 | struct slgt_desc *rbufs; | |
333 | unsigned int rbuf_current; | |
334 | unsigned int rbuf_index; | |
5ba5a5d2 PF |
335 | unsigned int rbuf_fill_index; |
336 | unsigned short rbuf_fill_count; | |
705b6c7b PF |
337 | |
338 | unsigned int tbuf_count; | |
339 | struct slgt_desc *tbufs; | |
340 | unsigned int tbuf_current; | |
341 | unsigned int tbuf_start; | |
342 | ||
343 | unsigned char *tmp_rbuf; | |
344 | unsigned int tmp_rbuf_count; | |
345 | ||
346 | /* SPPP/Cisco HDLC device parts */ | |
347 | ||
348 | int netcount; | |
705b6c7b | 349 | spinlock_t netlock; |
af69c7f9 | 350 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
351 | struct net_device *netdev; |
352 | #endif | |
353 | ||
354 | }; | |
355 | ||
356 | static MGSL_PARAMS default_params = { | |
357 | .mode = MGSL_MODE_HDLC, | |
358 | .loopback = 0, | |
359 | .flags = HDLC_FLAG_UNDERRUN_ABORT15, | |
360 | .encoding = HDLC_ENCODING_NRZI_SPACE, | |
361 | .clock_speed = 0, | |
362 | .addr_filter = 0xff, | |
363 | .crc_type = HDLC_CRC_16_CCITT, | |
364 | .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, | |
365 | .preamble = HDLC_PREAMBLE_PATTERN_NONE, | |
366 | .data_rate = 9600, | |
367 | .data_bits = 8, | |
368 | .stop_bits = 1, | |
369 | .parity = ASYNC_PARITY_NONE | |
370 | }; | |
371 | ||
372 | ||
373 | #define BH_RECEIVE 1 | |
374 | #define BH_TRANSMIT 2 | |
375 | #define BH_STATUS 4 | |
376 | #define IO_PIN_SHUTDOWN_LIMIT 100 | |
377 | ||
378 | #define DMABUFSIZE 256 | |
379 | #define DESC_LIST_SIZE 4096 | |
380 | ||
381 | #define MASK_PARITY BIT1 | |
202af6d5 PF |
382 | #define MASK_FRAMING BIT0 |
383 | #define MASK_BREAK BIT14 | |
705b6c7b PF |
384 | #define MASK_OVERRUN BIT4 |
385 | ||
386 | #define GSR 0x00 /* global status */ | |
0080b7aa PF |
387 | #define JCR 0x04 /* JTAG control */ |
388 | #define IODR 0x08 /* GPIO direction */ | |
389 | #define IOER 0x0c /* GPIO interrupt enable */ | |
390 | #define IOVR 0x10 /* GPIO value */ | |
391 | #define IOSR 0x14 /* GPIO interrupt status */ | |
705b6c7b PF |
392 | #define TDR 0x80 /* tx data */ |
393 | #define RDR 0x80 /* rx data */ | |
394 | #define TCR 0x82 /* tx control */ | |
395 | #define TIR 0x84 /* tx idle */ | |
396 | #define TPR 0x85 /* tx preamble */ | |
397 | #define RCR 0x86 /* rx control */ | |
398 | #define VCR 0x88 /* V.24 control */ | |
399 | #define CCR 0x89 /* clock control */ | |
400 | #define BDR 0x8a /* baud divisor */ | |
401 | #define SCR 0x8c /* serial control */ | |
402 | #define SSR 0x8e /* serial status */ | |
403 | #define RDCSR 0x90 /* rx DMA control/status */ | |
404 | #define TDCSR 0x94 /* tx DMA control/status */ | |
405 | #define RDDAR 0x98 /* rx DMA descriptor address */ | |
406 | #define TDDAR 0x9c /* tx DMA descriptor address */ | |
9807224f PF |
407 | #define XSR 0x40 /* extended sync pattern */ |
408 | #define XCR 0x44 /* extended control */ | |
705b6c7b PF |
409 | |
410 | #define RXIDLE BIT14 | |
411 | #define RXBREAK BIT14 | |
412 | #define IRQ_TXDATA BIT13 | |
413 | #define IRQ_TXIDLE BIT12 | |
414 | #define IRQ_TXUNDER BIT11 /* HDLC */ | |
415 | #define IRQ_RXDATA BIT10 | |
416 | #define IRQ_RXIDLE BIT9 /* HDLC */ | |
417 | #define IRQ_RXBREAK BIT9 /* async */ | |
418 | #define IRQ_RXOVER BIT8 | |
419 | #define IRQ_DSR BIT7 | |
420 | #define IRQ_CTS BIT6 | |
421 | #define IRQ_DCD BIT5 | |
422 | #define IRQ_RI BIT4 | |
423 | #define IRQ_ALL 0x3ff0 | |
424 | #define IRQ_MASTER BIT0 | |
425 | ||
426 | #define slgt_irq_on(info, mask) \ | |
427 | wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) | |
428 | #define slgt_irq_off(info, mask) \ | |
429 | wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) | |
430 | ||
431 | static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); | |
432 | static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); | |
433 | static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); | |
434 | static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); | |
435 | static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); | |
436 | static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); | |
437 | ||
438 | static void msc_set_vcr(struct slgt_info *info); | |
439 | ||
440 | static int startup(struct slgt_info *info); | |
441 | static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); | |
442 | static void shutdown(struct slgt_info *info); | |
443 | static void program_hw(struct slgt_info *info); | |
444 | static void change_params(struct slgt_info *info); | |
445 | ||
446 | static int register_test(struct slgt_info *info); | |
447 | static int irq_test(struct slgt_info *info); | |
448 | static int loopback_test(struct slgt_info *info); | |
449 | static int adapter_test(struct slgt_info *info); | |
450 | ||
451 | static void reset_adapter(struct slgt_info *info); | |
452 | static void reset_port(struct slgt_info *info); | |
453 | static void async_mode(struct slgt_info *info); | |
cb10dc9a | 454 | static void sync_mode(struct slgt_info *info); |
705b6c7b PF |
455 | |
456 | static void rx_stop(struct slgt_info *info); | |
457 | static void rx_start(struct slgt_info *info); | |
458 | static void reset_rbufs(struct slgt_info *info); | |
459 | static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); | |
460 | static void rdma_reset(struct slgt_info *info); | |
0fab6de0 JP |
461 | static bool rx_get_frame(struct slgt_info *info); |
462 | static bool rx_get_buf(struct slgt_info *info); | |
705b6c7b PF |
463 | |
464 | static void tx_start(struct slgt_info *info); | |
465 | static void tx_stop(struct slgt_info *info); | |
466 | static void tx_set_idle(struct slgt_info *info); | |
467 | static unsigned int free_tbuf_count(struct slgt_info *info); | |
403214d0 | 468 | static unsigned int tbuf_bytes(struct slgt_info *info); |
705b6c7b PF |
469 | static void reset_tbufs(struct slgt_info *info); |
470 | static void tdma_reset(struct slgt_info *info); | |
de538eb3 | 471 | static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); |
705b6c7b PF |
472 | |
473 | static void get_signals(struct slgt_info *info); | |
474 | static void set_signals(struct slgt_info *info); | |
475 | static void enable_loopback(struct slgt_info *info); | |
476 | static void set_rate(struct slgt_info *info, u32 data_rate); | |
477 | ||
478 | static int bh_action(struct slgt_info *info); | |
c4028958 | 479 | static void bh_handler(struct work_struct *work); |
705b6c7b PF |
480 | static void bh_transmit(struct slgt_info *info); |
481 | static void isr_serial(struct slgt_info *info); | |
482 | static void isr_rdma(struct slgt_info *info); | |
483 | static void isr_txeom(struct slgt_info *info, unsigned short status); | |
484 | static void isr_tdma(struct slgt_info *info); | |
705b6c7b PF |
485 | |
486 | static int alloc_dma_bufs(struct slgt_info *info); | |
487 | static void free_dma_bufs(struct slgt_info *info); | |
488 | static int alloc_desc(struct slgt_info *info); | |
489 | static void free_desc(struct slgt_info *info); | |
490 | static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); | |
491 | static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); | |
492 | ||
493 | static int alloc_tmp_rbuf(struct slgt_info *info); | |
494 | static void free_tmp_rbuf(struct slgt_info *info); | |
495 | ||
e99e88a9 KC |
496 | static void tx_timeout(struct timer_list *t); |
497 | static void rx_timeout(struct timer_list *t); | |
705b6c7b PF |
498 | |
499 | /* | |
500 | * ioctl handlers | |
501 | */ | |
502 | static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); | |
503 | static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); | |
504 | static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); | |
505 | static int get_txidle(struct slgt_info *info, int __user *idle_mode); | |
506 | static int set_txidle(struct slgt_info *info, int idle_mode); | |
507 | static int tx_enable(struct slgt_info *info, int enable); | |
508 | static int tx_abort(struct slgt_info *info); | |
509 | static int rx_enable(struct slgt_info *info, int enable); | |
510 | static int modem_input_wait(struct slgt_info *info,int arg); | |
511 | static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); | |
60b33c13 | 512 | static int tiocmget(struct tty_struct *tty); |
20b9d177 AC |
513 | static int tiocmset(struct tty_struct *tty, |
514 | unsigned int set, unsigned int clear); | |
9e98966c | 515 | static int set_break(struct tty_struct *tty, int break_state); |
705b6c7b PF |
516 | static int get_interface(struct slgt_info *info, int __user *if_mode); |
517 | static int set_interface(struct slgt_info *info, int if_mode); | |
0080b7aa PF |
518 | static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); |
519 | static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); | |
520 | static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); | |
9807224f PF |
521 | static int get_xsync(struct slgt_info *info, int __user *if_mode); |
522 | static int set_xsync(struct slgt_info *info, int if_mode); | |
523 | static int get_xctrl(struct slgt_info *info, int __user *if_mode); | |
524 | static int set_xctrl(struct slgt_info *info, int if_mode); | |
705b6c7b PF |
525 | |
526 | /* | |
527 | * driver functions | |
528 | */ | |
529 | static void add_device(struct slgt_info *info); | |
530 | static void device_init(int adapter_num, struct pci_dev *pdev); | |
531 | static int claim_resources(struct slgt_info *info); | |
532 | static void release_resources(struct slgt_info *info); | |
533 | ||
534 | /* | |
535 | * DEBUG OUTPUT CODE | |
536 | */ | |
537 | #ifndef DBGINFO | |
538 | #define DBGINFO(fmt) | |
539 | #endif | |
540 | #ifndef DBGERR | |
541 | #define DBGERR(fmt) | |
542 | #endif | |
543 | #ifndef DBGBH | |
544 | #define DBGBH(fmt) | |
545 | #endif | |
546 | #ifndef DBGISR | |
547 | #define DBGISR(fmt) | |
548 | #endif | |
549 | ||
550 | #ifdef DBGDATA | |
551 | static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) | |
552 | { | |
553 | int i; | |
554 | int linecount; | |
555 | printk("%s %s data:\n",info->device_name, label); | |
556 | while(count) { | |
557 | linecount = (count > 16) ? 16 : count; | |
558 | for(i=0; i < linecount; i++) | |
559 | printk("%02X ",(unsigned char)data[i]); | |
560 | for(;i<17;i++) | |
561 | printk(" "); | |
562 | for(i=0;i<linecount;i++) { | |
563 | if (data[i]>=040 && data[i]<=0176) | |
564 | printk("%c",data[i]); | |
565 | else | |
566 | printk("."); | |
567 | } | |
568 | printk("\n"); | |
569 | data += linecount; | |
570 | count -= linecount; | |
571 | } | |
572 | } | |
573 | #else | |
574 | #define DBGDATA(info, buf, size, label) | |
575 | #endif | |
576 | ||
577 | #ifdef DBGTBUF | |
578 | static void dump_tbufs(struct slgt_info *info) | |
579 | { | |
580 | int i; | |
581 | printk("tbuf_current=%d\n", info->tbuf_current); | |
582 | for (i=0 ; i < info->tbuf_count ; i++) { | |
583 | printk("%d: count=%04X status=%04X\n", | |
584 | i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); | |
585 | } | |
586 | } | |
587 | #else | |
588 | #define DBGTBUF(info) | |
589 | #endif | |
590 | ||
591 | #ifdef DBGRBUF | |
592 | static void dump_rbufs(struct slgt_info *info) | |
593 | { | |
594 | int i; | |
595 | printk("rbuf_current=%d\n", info->rbuf_current); | |
596 | for (i=0 ; i < info->rbuf_count ; i++) { | |
597 | printk("%d: count=%04X status=%04X\n", | |
598 | i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); | |
599 | } | |
600 | } | |
601 | #else | |
602 | #define DBGRBUF(info) | |
603 | #endif | |
604 | ||
605 | static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) | |
606 | { | |
607 | #ifdef SANITY_CHECK | |
608 | if (!info) { | |
609 | printk("null struct slgt_info for (%s) in %s\n", devname, name); | |
610 | return 1; | |
611 | } | |
612 | if (info->magic != MGSL_MAGIC) { | |
613 | printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); | |
614 | return 1; | |
615 | } | |
616 | #else | |
617 | if (!info) | |
618 | return 1; | |
619 | #endif | |
620 | return 0; | |
621 | } | |
622 | ||
623 | /** | |
624 | * line discipline callback wrappers | |
625 | * | |
626 | * The wrappers maintain line discipline references | |
627 | * while calling into the line discipline. | |
628 | * | |
629 | * ldisc_receive_buf - pass receive data to line discipline | |
630 | */ | |
631 | static void ldisc_receive_buf(struct tty_struct *tty, | |
632 | const __u8 *data, char *flags, int count) | |
633 | { | |
634 | struct tty_ldisc *ld; | |
635 | if (!tty) | |
636 | return; | |
637 | ld = tty_ldisc_ref(tty); | |
638 | if (ld) { | |
a352def2 AC |
639 | if (ld->ops->receive_buf) |
640 | ld->ops->receive_buf(tty, data, flags, count); | |
705b6c7b PF |
641 | tty_ldisc_deref(ld); |
642 | } | |
643 | } | |
644 | ||
645 | /* tty callbacks */ | |
646 | ||
647 | static int open(struct tty_struct *tty, struct file *filp) | |
648 | { | |
649 | struct slgt_info *info; | |
650 | int retval, line; | |
651 | unsigned long flags; | |
652 | ||
653 | line = tty->index; | |
410235fd | 654 | if (line >= slgt_device_count) { |
705b6c7b PF |
655 | DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); |
656 | return -ENODEV; | |
657 | } | |
658 | ||
659 | info = slgt_device_list; | |
660 | while(info && info->line != line) | |
661 | info = info->next_device; | |
662 | if (sanity_check(info, tty->name, "open")) | |
663 | return -ENODEV; | |
664 | if (info->init_error) { | |
665 | DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); | |
666 | return -ENODEV; | |
667 | } | |
668 | ||
669 | tty->driver_data = info; | |
8fb06c77 | 670 | info->port.tty = tty; |
705b6c7b | 671 | |
8fb06c77 | 672 | DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); |
705b6c7b | 673 | |
a360fae6 | 674 | mutex_lock(&info->port.mutex); |
d6c53c0e | 675 | info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; |
705b6c7b PF |
676 | |
677 | spin_lock_irqsave(&info->netlock, flags); | |
678 | if (info->netcount) { | |
679 | retval = -EBUSY; | |
680 | spin_unlock_irqrestore(&info->netlock, flags); | |
a360fae6 | 681 | mutex_unlock(&info->port.mutex); |
705b6c7b PF |
682 | goto cleanup; |
683 | } | |
8fb06c77 | 684 | info->port.count++; |
705b6c7b PF |
685 | spin_unlock_irqrestore(&info->netlock, flags); |
686 | ||
8fb06c77 | 687 | if (info->port.count == 1) { |
705b6c7b PF |
688 | /* 1st open on this device, init hardware */ |
689 | retval = startup(info); | |
80d04f22 DC |
690 | if (retval < 0) { |
691 | mutex_unlock(&info->port.mutex); | |
705b6c7b | 692 | goto cleanup; |
80d04f22 | 693 | } |
705b6c7b | 694 | } |
a360fae6 | 695 | mutex_unlock(&info->port.mutex); |
705b6c7b PF |
696 | retval = block_til_ready(tty, filp, info); |
697 | if (retval) { | |
698 | DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); | |
699 | goto cleanup; | |
700 | } | |
701 | ||
702 | retval = 0; | |
703 | ||
704 | cleanup: | |
705 | if (retval) { | |
706 | if (tty->count == 1) | |
8fb06c77 AC |
707 | info->port.tty = NULL; /* tty layer will release tty struct */ |
708 | if(info->port.count) | |
709 | info->port.count--; | |
705b6c7b PF |
710 | } |
711 | ||
712 | DBGINFO(("%s open rc=%d\n", info->device_name, retval)); | |
713 | return retval; | |
714 | } | |
715 | ||
716 | static void close(struct tty_struct *tty, struct file *filp) | |
717 | { | |
718 | struct slgt_info *info = tty->driver_data; | |
719 | ||
720 | if (sanity_check(info, tty->name, "close")) | |
721 | return; | |
8fb06c77 | 722 | DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); |
705b6c7b | 723 | |
a6614999 | 724 | if (tty_port_close_start(&info->port, tty, filp) == 0) |
705b6c7b PF |
725 | goto cleanup; |
726 | ||
a360fae6 | 727 | mutex_lock(&info->port.mutex); |
d41861ca | 728 | if (tty_port_initialized(&info->port)) |
705b6c7b | 729 | wait_until_sent(tty, info->timeout); |
978e595f | 730 | flush_buffer(tty); |
705b6c7b PF |
731 | tty_ldisc_flush(tty); |
732 | ||
733 | shutdown(info); | |
a360fae6 | 734 | mutex_unlock(&info->port.mutex); |
705b6c7b | 735 | |
a6614999 | 736 | tty_port_close_end(&info->port, tty); |
8fb06c77 | 737 | info->port.tty = NULL; |
705b6c7b | 738 | cleanup: |
8fb06c77 | 739 | DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); |
705b6c7b PF |
740 | } |
741 | ||
742 | static void hangup(struct tty_struct *tty) | |
743 | { | |
744 | struct slgt_info *info = tty->driver_data; | |
a360fae6 | 745 | unsigned long flags; |
705b6c7b PF |
746 | |
747 | if (sanity_check(info, tty->name, "hangup")) | |
748 | return; | |
749 | DBGINFO(("%s hangup\n", info->device_name)); | |
750 | ||
751 | flush_buffer(tty); | |
a360fae6 AC |
752 | |
753 | mutex_lock(&info->port.mutex); | |
705b6c7b PF |
754 | shutdown(info); |
755 | ||
a360fae6 | 756 | spin_lock_irqsave(&info->port.lock, flags); |
8fb06c77 | 757 | info->port.count = 0; |
8fb06c77 | 758 | info->port.tty = NULL; |
a360fae6 | 759 | spin_unlock_irqrestore(&info->port.lock, flags); |
807c8d81 | 760 | tty_port_set_active(&info->port, 0); |
a360fae6 | 761 | mutex_unlock(&info->port.mutex); |
705b6c7b | 762 | |
8fb06c77 | 763 | wake_up_interruptible(&info->port.open_wait); |
705b6c7b PF |
764 | } |
765 | ||
606d099c | 766 | static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
705b6c7b PF |
767 | { |
768 | struct slgt_info *info = tty->driver_data; | |
769 | unsigned long flags; | |
770 | ||
771 | DBGINFO(("%s set_termios\n", tty->driver->name)); | |
772 | ||
705b6c7b PF |
773 | change_params(info); |
774 | ||
775 | /* Handle transition to B0 status */ | |
9db276f8 | 776 | if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { |
9fe8074b | 777 | info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); |
705b6c7b PF |
778 | spin_lock_irqsave(&info->lock,flags); |
779 | set_signals(info); | |
780 | spin_unlock_irqrestore(&info->lock,flags); | |
781 | } | |
782 | ||
783 | /* Handle transition away from B0 status */ | |
9db276f8 | 784 | if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { |
705b6c7b | 785 | info->signals |= SerialSignal_DTR; |
97ef38b8 | 786 | if (!C_CRTSCTS(tty) || !tty_throttled(tty)) |
705b6c7b | 787 | info->signals |= SerialSignal_RTS; |
705b6c7b PF |
788 | spin_lock_irqsave(&info->lock,flags); |
789 | set_signals(info); | |
790 | spin_unlock_irqrestore(&info->lock,flags); | |
791 | } | |
792 | ||
793 | /* Handle turning off CRTSCTS */ | |
9db276f8 | 794 | if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { |
705b6c7b PF |
795 | tty->hw_stopped = 0; |
796 | tx_release(tty); | |
797 | } | |
798 | } | |
799 | ||
ce89294c PF |
800 | static void update_tx_timer(struct slgt_info *info) |
801 | { | |
802 | /* | |
803 | * use worst case speed of 1200bps to calculate transmit timeout | |
804 | * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) | |
805 | */ | |
806 | if (info->params.mode == MGSL_MODE_HDLC) { | |
807 | int timeout = (tbuf_bytes(info) * 7) + 1000; | |
808 | mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); | |
809 | } | |
810 | } | |
811 | ||
705b6c7b PF |
812 | static int write(struct tty_struct *tty, |
813 | const unsigned char *buf, int count) | |
814 | { | |
815 | int ret = 0; | |
816 | struct slgt_info *info = tty->driver_data; | |
817 | unsigned long flags; | |
818 | ||
819 | if (sanity_check(info, tty->name, "write")) | |
de538eb3 PF |
820 | return -EIO; |
821 | ||
705b6c7b PF |
822 | DBGINFO(("%s write count=%d\n", info->device_name, count)); |
823 | ||
de538eb3 PF |
824 | if (!info->tx_buf || (count > info->max_frame_size)) |
825 | return -EIO; | |
705b6c7b | 826 | |
de538eb3 PF |
827 | if (!count || tty->stopped || tty->hw_stopped) |
828 | return 0; | |
705b6c7b | 829 | |
de538eb3 | 830 | spin_lock_irqsave(&info->lock, flags); |
705b6c7b | 831 | |
de538eb3 | 832 | if (info->tx_count) { |
8a38c285 | 833 | /* send accumulated data from send_char() */ |
de538eb3 PF |
834 | if (!tx_load(info, info->tx_buf, info->tx_count)) |
835 | goto cleanup; | |
836 | info->tx_count = 0; | |
705b6c7b PF |
837 | } |
838 | ||
de538eb3 PF |
839 | if (tx_load(info, buf, count)) |
840 | ret = count; | |
705b6c7b PF |
841 | |
842 | cleanup: | |
de538eb3 | 843 | spin_unlock_irqrestore(&info->lock, flags); |
705b6c7b PF |
844 | DBGINFO(("%s write rc=%d\n", info->device_name, ret)); |
845 | return ret; | |
846 | } | |
847 | ||
55da7789 | 848 | static int put_char(struct tty_struct *tty, unsigned char ch) |
705b6c7b PF |
849 | { |
850 | struct slgt_info *info = tty->driver_data; | |
851 | unsigned long flags; | |
6c82c415 | 852 | int ret = 0; |
705b6c7b PF |
853 | |
854 | if (sanity_check(info, tty->name, "put_char")) | |
55da7789 | 855 | return 0; |
705b6c7b | 856 | DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); |
326f28e9 | 857 | if (!info->tx_buf) |
55da7789 | 858 | return 0; |
705b6c7b | 859 | spin_lock_irqsave(&info->lock,flags); |
de538eb3 | 860 | if (info->tx_count < info->max_frame_size) { |
705b6c7b | 861 | info->tx_buf[info->tx_count++] = ch; |
55da7789 AC |
862 | ret = 1; |
863 | } | |
705b6c7b | 864 | spin_unlock_irqrestore(&info->lock,flags); |
55da7789 | 865 | return ret; |
705b6c7b PF |
866 | } |
867 | ||
868 | static void send_xchar(struct tty_struct *tty, char ch) | |
869 | { | |
870 | struct slgt_info *info = tty->driver_data; | |
871 | unsigned long flags; | |
872 | ||
873 | if (sanity_check(info, tty->name, "send_xchar")) | |
874 | return; | |
875 | DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); | |
876 | info->x_char = ch; | |
877 | if (ch) { | |
878 | spin_lock_irqsave(&info->lock,flags); | |
879 | if (!info->tx_enabled) | |
880 | tx_start(info); | |
881 | spin_unlock_irqrestore(&info->lock,flags); | |
882 | } | |
883 | } | |
884 | ||
885 | static void wait_until_sent(struct tty_struct *tty, int timeout) | |
886 | { | |
887 | struct slgt_info *info = tty->driver_data; | |
888 | unsigned long orig_jiffies, char_time; | |
889 | ||
890 | if (!info ) | |
891 | return; | |
892 | if (sanity_check(info, tty->name, "wait_until_sent")) | |
893 | return; | |
894 | DBGINFO(("%s wait_until_sent entry\n", info->device_name)); | |
d41861ca | 895 | if (!tty_port_initialized(&info->port)) |
705b6c7b PF |
896 | goto exit; |
897 | ||
898 | orig_jiffies = jiffies; | |
899 | ||
900 | /* Set check interval to 1/5 of estimated time to | |
901 | * send a character, and make it at least 1. The check | |
902 | * interval should also be less than the timeout. | |
903 | * Note: use tight timings here to satisfy the NIST-PCTS. | |
904 | */ | |
905 | ||
906 | if (info->params.data_rate) { | |
907 | char_time = info->timeout/(32 * 5); | |
908 | if (!char_time) | |
909 | char_time++; | |
910 | } else | |
911 | char_time = 1; | |
912 | ||
913 | if (timeout) | |
914 | char_time = min_t(unsigned long, char_time, timeout); | |
915 | ||
916 | while (info->tx_active) { | |
917 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
918 | if (signal_pending(current)) | |
919 | break; | |
920 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
921 | break; | |
922 | } | |
705b6c7b PF |
923 | exit: |
924 | DBGINFO(("%s wait_until_sent exit\n", info->device_name)); | |
925 | } | |
926 | ||
927 | static int write_room(struct tty_struct *tty) | |
928 | { | |
929 | struct slgt_info *info = tty->driver_data; | |
930 | int ret; | |
931 | ||
932 | if (sanity_check(info, tty->name, "write_room")) | |
933 | return 0; | |
934 | ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; | |
935 | DBGINFO(("%s write_room=%d\n", info->device_name, ret)); | |
936 | return ret; | |
937 | } | |
938 | ||
939 | static void flush_chars(struct tty_struct *tty) | |
940 | { | |
941 | struct slgt_info *info = tty->driver_data; | |
942 | unsigned long flags; | |
943 | ||
944 | if (sanity_check(info, tty->name, "flush_chars")) | |
945 | return; | |
946 | DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); | |
947 | ||
948 | if (info->tx_count <= 0 || tty->stopped || | |
949 | tty->hw_stopped || !info->tx_buf) | |
950 | return; | |
951 | ||
952 | DBGINFO(("%s flush_chars start transmit\n", info->device_name)); | |
953 | ||
954 | spin_lock_irqsave(&info->lock,flags); | |
de538eb3 PF |
955 | if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) |
956 | info->tx_count = 0; | |
705b6c7b PF |
957 | spin_unlock_irqrestore(&info->lock,flags); |
958 | } | |
959 | ||
960 | static void flush_buffer(struct tty_struct *tty) | |
961 | { | |
962 | struct slgt_info *info = tty->driver_data; | |
963 | unsigned long flags; | |
964 | ||
965 | if (sanity_check(info, tty->name, "flush_buffer")) | |
966 | return; | |
967 | DBGINFO(("%s flush_buffer\n", info->device_name)); | |
968 | ||
de538eb3 PF |
969 | spin_lock_irqsave(&info->lock, flags); |
970 | info->tx_count = 0; | |
971 | spin_unlock_irqrestore(&info->lock, flags); | |
705b6c7b | 972 | |
705b6c7b PF |
973 | tty_wakeup(tty); |
974 | } | |
975 | ||
976 | /* | |
977 | * throttle (stop) transmitter | |
978 | */ | |
979 | static void tx_hold(struct tty_struct *tty) | |
980 | { | |
981 | struct slgt_info *info = tty->driver_data; | |
982 | unsigned long flags; | |
983 | ||
984 | if (sanity_check(info, tty->name, "tx_hold")) | |
985 | return; | |
986 | DBGINFO(("%s tx_hold\n", info->device_name)); | |
987 | spin_lock_irqsave(&info->lock,flags); | |
988 | if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) | |
989 | tx_stop(info); | |
990 | spin_unlock_irqrestore(&info->lock,flags); | |
991 | } | |
992 | ||
993 | /* | |
994 | * release (start) transmitter | |
995 | */ | |
996 | static void tx_release(struct tty_struct *tty) | |
997 | { | |
998 | struct slgt_info *info = tty->driver_data; | |
999 | unsigned long flags; | |
1000 | ||
1001 | if (sanity_check(info, tty->name, "tx_release")) | |
1002 | return; | |
1003 | DBGINFO(("%s tx_release\n", info->device_name)); | |
de538eb3 PF |
1004 | spin_lock_irqsave(&info->lock, flags); |
1005 | if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) | |
1006 | info->tx_count = 0; | |
1007 | spin_unlock_irqrestore(&info->lock, flags); | |
705b6c7b PF |
1008 | } |
1009 | ||
1010 | /* | |
1011 | * Service an IOCTL request | |
1012 | * | |
1013 | * Arguments | |
1014 | * | |
1015 | * tty pointer to tty instance data | |
705b6c7b PF |
1016 | * cmd IOCTL command code |
1017 | * arg command argument/context | |
1018 | * | |
1019 | * Return 0 if success, otherwise error code | |
1020 | */ | |
6caa76b7 | 1021 | static int ioctl(struct tty_struct *tty, |
705b6c7b PF |
1022 | unsigned int cmd, unsigned long arg) |
1023 | { | |
1024 | struct slgt_info *info = tty->driver_data; | |
705b6c7b | 1025 | void __user *argp = (void __user *)arg; |
1f8cabb7 | 1026 | int ret; |
705b6c7b PF |
1027 | |
1028 | if (sanity_check(info, tty->name, "ioctl")) | |
1029 | return -ENODEV; | |
1030 | DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); | |
1031 | ||
1032 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
0587102c | 1033 | (cmd != TIOCMIWAIT)) { |
18900ca6 | 1034 | if (tty_io_error(tty)) |
705b6c7b PF |
1035 | return -EIO; |
1036 | } | |
1037 | ||
f602501d AC |
1038 | switch (cmd) { |
1039 | case MGSL_IOCWAITEVENT: | |
1040 | return wait_mgsl_event(info, argp); | |
1041 | case TIOCMIWAIT: | |
1042 | return modem_input_wait(info,(int)arg); | |
f602501d AC |
1043 | case MGSL_IOCSGPIO: |
1044 | return set_gpio(info, argp); | |
1045 | case MGSL_IOCGGPIO: | |
1046 | return get_gpio(info, argp); | |
1047 | case MGSL_IOCWAITGPIO: | |
1048 | return wait_gpio(info, argp); | |
9807224f PF |
1049 | case MGSL_IOCGXSYNC: |
1050 | return get_xsync(info, argp); | |
1051 | case MGSL_IOCSXSYNC: | |
1052 | return set_xsync(info, (int)arg); | |
1053 | case MGSL_IOCGXCTRL: | |
1054 | return get_xctrl(info, argp); | |
1055 | case MGSL_IOCSXCTRL: | |
1056 | return set_xctrl(info, (int)arg); | |
f602501d AC |
1057 | } |
1058 | mutex_lock(&info->port.mutex); | |
705b6c7b PF |
1059 | switch (cmd) { |
1060 | case MGSL_IOCGPARAMS: | |
1f8cabb7 AC |
1061 | ret = get_params(info, argp); |
1062 | break; | |
705b6c7b | 1063 | case MGSL_IOCSPARAMS: |
1f8cabb7 AC |
1064 | ret = set_params(info, argp); |
1065 | break; | |
705b6c7b | 1066 | case MGSL_IOCGTXIDLE: |
1f8cabb7 AC |
1067 | ret = get_txidle(info, argp); |
1068 | break; | |
705b6c7b | 1069 | case MGSL_IOCSTXIDLE: |
1f8cabb7 AC |
1070 | ret = set_txidle(info, (int)arg); |
1071 | break; | |
705b6c7b | 1072 | case MGSL_IOCTXENABLE: |
1f8cabb7 AC |
1073 | ret = tx_enable(info, (int)arg); |
1074 | break; | |
705b6c7b | 1075 | case MGSL_IOCRXENABLE: |
1f8cabb7 AC |
1076 | ret = rx_enable(info, (int)arg); |
1077 | break; | |
705b6c7b | 1078 | case MGSL_IOCTXABORT: |
1f8cabb7 AC |
1079 | ret = tx_abort(info); |
1080 | break; | |
705b6c7b | 1081 | case MGSL_IOCGSTATS: |
1f8cabb7 AC |
1082 | ret = get_stats(info, argp); |
1083 | break; | |
705b6c7b | 1084 | case MGSL_IOCGIF: |
1f8cabb7 AC |
1085 | ret = get_interface(info, argp); |
1086 | break; | |
705b6c7b | 1087 | case MGSL_IOCSIF: |
1f8cabb7 AC |
1088 | ret = set_interface(info,(int)arg); |
1089 | break; | |
705b6c7b | 1090 | default: |
1f8cabb7 | 1091 | ret = -ENOIOCTLCMD; |
705b6c7b | 1092 | } |
f602501d | 1093 | mutex_unlock(&info->port.mutex); |
1f8cabb7 | 1094 | return ret; |
705b6c7b PF |
1095 | } |
1096 | ||
0587102c AC |
1097 | static int get_icount(struct tty_struct *tty, |
1098 | struct serial_icounter_struct *icount) | |
1099 | ||
1100 | { | |
1101 | struct slgt_info *info = tty->driver_data; | |
1102 | struct mgsl_icount cnow; /* kernel counter temps */ | |
1103 | unsigned long flags; | |
1104 | ||
1105 | spin_lock_irqsave(&info->lock,flags); | |
1106 | cnow = info->icount; | |
1107 | spin_unlock_irqrestore(&info->lock,flags); | |
1108 | ||
1109 | icount->cts = cnow.cts; | |
1110 | icount->dsr = cnow.dsr; | |
1111 | icount->rng = cnow.rng; | |
1112 | icount->dcd = cnow.dcd; | |
1113 | icount->rx = cnow.rx; | |
1114 | icount->tx = cnow.tx; | |
1115 | icount->frame = cnow.frame; | |
1116 | icount->overrun = cnow.overrun; | |
1117 | icount->parity = cnow.parity; | |
1118 | icount->brk = cnow.brk; | |
1119 | icount->buf_overrun = cnow.buf_overrun; | |
1120 | ||
1121 | return 0; | |
1122 | } | |
1123 | ||
2acdb169 PF |
1124 | /* |
1125 | * support for 32 bit ioctl calls on 64 bit systems | |
1126 | */ | |
1127 | #ifdef CONFIG_COMPAT | |
1128 | static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) | |
1129 | { | |
1130 | struct MGSL_PARAMS32 tmp_params; | |
1131 | ||
1132 | DBGINFO(("%s get_params32\n", info->device_name)); | |
ed77ed61 | 1133 | memset(&tmp_params, 0, sizeof(tmp_params)); |
2acdb169 PF |
1134 | tmp_params.mode = (compat_ulong_t)info->params.mode; |
1135 | tmp_params.loopback = info->params.loopback; | |
1136 | tmp_params.flags = info->params.flags; | |
1137 | tmp_params.encoding = info->params.encoding; | |
1138 | tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; | |
1139 | tmp_params.addr_filter = info->params.addr_filter; | |
1140 | tmp_params.crc_type = info->params.crc_type; | |
1141 | tmp_params.preamble_length = info->params.preamble_length; | |
1142 | tmp_params.preamble = info->params.preamble; | |
1143 | tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; | |
1144 | tmp_params.data_bits = info->params.data_bits; | |
1145 | tmp_params.stop_bits = info->params.stop_bits; | |
1146 | tmp_params.parity = info->params.parity; | |
1147 | if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) | |
1148 | return -EFAULT; | |
1149 | return 0; | |
1150 | } | |
1151 | ||
1152 | static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) | |
1153 | { | |
1154 | struct MGSL_PARAMS32 tmp_params; | |
1155 | ||
1156 | DBGINFO(("%s set_params32\n", info->device_name)); | |
1157 | if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) | |
1158 | return -EFAULT; | |
1159 | ||
1160 | spin_lock(&info->lock); | |
1f80769f PF |
1161 | if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { |
1162 | info->base_clock = tmp_params.clock_speed; | |
1163 | } else { | |
1164 | info->params.mode = tmp_params.mode; | |
1165 | info->params.loopback = tmp_params.loopback; | |
1166 | info->params.flags = tmp_params.flags; | |
1167 | info->params.encoding = tmp_params.encoding; | |
1168 | info->params.clock_speed = tmp_params.clock_speed; | |
1169 | info->params.addr_filter = tmp_params.addr_filter; | |
1170 | info->params.crc_type = tmp_params.crc_type; | |
1171 | info->params.preamble_length = tmp_params.preamble_length; | |
1172 | info->params.preamble = tmp_params.preamble; | |
1173 | info->params.data_rate = tmp_params.data_rate; | |
1174 | info->params.data_bits = tmp_params.data_bits; | |
1175 | info->params.stop_bits = tmp_params.stop_bits; | |
1176 | info->params.parity = tmp_params.parity; | |
1177 | } | |
2acdb169 PF |
1178 | spin_unlock(&info->lock); |
1179 | ||
1f80769f | 1180 | program_hw(info); |
2acdb169 PF |
1181 | |
1182 | return 0; | |
1183 | } | |
1184 | ||
6caa76b7 | 1185 | static long slgt_compat_ioctl(struct tty_struct *tty, |
2acdb169 PF |
1186 | unsigned int cmd, unsigned long arg) |
1187 | { | |
1188 | struct slgt_info *info = tty->driver_data; | |
1189 | int rc = -ENOIOCTLCMD; | |
1190 | ||
1191 | if (sanity_check(info, tty->name, "compat_ioctl")) | |
1192 | return -ENODEV; | |
1193 | DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); | |
1194 | ||
1195 | switch (cmd) { | |
1196 | ||
1197 | case MGSL_IOCSPARAMS32: | |
1198 | rc = set_params32(info, compat_ptr(arg)); | |
1199 | break; | |
1200 | ||
1201 | case MGSL_IOCGPARAMS32: | |
1202 | rc = get_params32(info, compat_ptr(arg)); | |
1203 | break; | |
1204 | ||
1205 | case MGSL_IOCGPARAMS: | |
1206 | case MGSL_IOCSPARAMS: | |
1207 | case MGSL_IOCGTXIDLE: | |
1208 | case MGSL_IOCGSTATS: | |
1209 | case MGSL_IOCWAITEVENT: | |
1210 | case MGSL_IOCGIF: | |
1211 | case MGSL_IOCSGPIO: | |
1212 | case MGSL_IOCGGPIO: | |
1213 | case MGSL_IOCWAITGPIO: | |
9807224f PF |
1214 | case MGSL_IOCGXSYNC: |
1215 | case MGSL_IOCGXCTRL: | |
2acdb169 PF |
1216 | case MGSL_IOCSTXIDLE: |
1217 | case MGSL_IOCTXENABLE: | |
1218 | case MGSL_IOCRXENABLE: | |
1219 | case MGSL_IOCTXABORT: | |
1220 | case TIOCMIWAIT: | |
1221 | case MGSL_IOCSIF: | |
9807224f PF |
1222 | case MGSL_IOCSXSYNC: |
1223 | case MGSL_IOCSXCTRL: | |
6caa76b7 | 1224 | rc = ioctl(tty, cmd, arg); |
2acdb169 PF |
1225 | break; |
1226 | } | |
1227 | ||
1228 | DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); | |
1229 | return rc; | |
1230 | } | |
1231 | #else | |
1232 | #define slgt_compat_ioctl NULL | |
1233 | #endif /* ifdef CONFIG_COMPAT */ | |
1234 | ||
705b6c7b PF |
1235 | /* |
1236 | * proc fs support | |
1237 | */ | |
a18c56e5 | 1238 | static inline void line_info(struct seq_file *m, struct slgt_info *info) |
705b6c7b PF |
1239 | { |
1240 | char stat_buf[30]; | |
705b6c7b PF |
1241 | unsigned long flags; |
1242 | ||
a18c56e5 | 1243 | seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", |
705b6c7b PF |
1244 | info->device_name, info->phys_reg_addr, |
1245 | info->irq_level, info->max_frame_size); | |
1246 | ||
1247 | /* output current serial signal states */ | |
1248 | spin_lock_irqsave(&info->lock,flags); | |
1249 | get_signals(info); | |
1250 | spin_unlock_irqrestore(&info->lock,flags); | |
1251 | ||
1252 | stat_buf[0] = 0; | |
1253 | stat_buf[1] = 0; | |
1254 | if (info->signals & SerialSignal_RTS) | |
1255 | strcat(stat_buf, "|RTS"); | |
1256 | if (info->signals & SerialSignal_CTS) | |
1257 | strcat(stat_buf, "|CTS"); | |
1258 | if (info->signals & SerialSignal_DTR) | |
1259 | strcat(stat_buf, "|DTR"); | |
1260 | if (info->signals & SerialSignal_DSR) | |
1261 | strcat(stat_buf, "|DSR"); | |
1262 | if (info->signals & SerialSignal_DCD) | |
1263 | strcat(stat_buf, "|CD"); | |
1264 | if (info->signals & SerialSignal_RI) | |
1265 | strcat(stat_buf, "|RI"); | |
1266 | ||
1267 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
a18c56e5 | 1268 | seq_printf(m, "\tHDLC txok:%d rxok:%d", |
705b6c7b PF |
1269 | info->icount.txok, info->icount.rxok); |
1270 | if (info->icount.txunder) | |
a18c56e5 | 1271 | seq_printf(m, " txunder:%d", info->icount.txunder); |
705b6c7b | 1272 | if (info->icount.txabort) |
a18c56e5 | 1273 | seq_printf(m, " txabort:%d", info->icount.txabort); |
705b6c7b | 1274 | if (info->icount.rxshort) |
a18c56e5 | 1275 | seq_printf(m, " rxshort:%d", info->icount.rxshort); |
705b6c7b | 1276 | if (info->icount.rxlong) |
a18c56e5 | 1277 | seq_printf(m, " rxlong:%d", info->icount.rxlong); |
705b6c7b | 1278 | if (info->icount.rxover) |
a18c56e5 | 1279 | seq_printf(m, " rxover:%d", info->icount.rxover); |
705b6c7b | 1280 | if (info->icount.rxcrc) |
a18c56e5 | 1281 | seq_printf(m, " rxcrc:%d", info->icount.rxcrc); |
705b6c7b | 1282 | } else { |
a18c56e5 | 1283 | seq_printf(m, "\tASYNC tx:%d rx:%d", |
705b6c7b PF |
1284 | info->icount.tx, info->icount.rx); |
1285 | if (info->icount.frame) | |
a18c56e5 | 1286 | seq_printf(m, " fe:%d", info->icount.frame); |
705b6c7b | 1287 | if (info->icount.parity) |
a18c56e5 | 1288 | seq_printf(m, " pe:%d", info->icount.parity); |
705b6c7b | 1289 | if (info->icount.brk) |
a18c56e5 | 1290 | seq_printf(m, " brk:%d", info->icount.brk); |
705b6c7b | 1291 | if (info->icount.overrun) |
a18c56e5 | 1292 | seq_printf(m, " oe:%d", info->icount.overrun); |
705b6c7b PF |
1293 | } |
1294 | ||
1295 | /* Append serial signal status to end */ | |
a18c56e5 | 1296 | seq_printf(m, " %s\n", stat_buf+1); |
705b6c7b | 1297 | |
a18c56e5 | 1298 | seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", |
705b6c7b PF |
1299 | info->tx_active,info->bh_requested,info->bh_running, |
1300 | info->pending_bh); | |
705b6c7b PF |
1301 | } |
1302 | ||
1303 | /* Called to print information about devices | |
1304 | */ | |
a18c56e5 | 1305 | static int synclink_gt_proc_show(struct seq_file *m, void *v) |
705b6c7b | 1306 | { |
705b6c7b PF |
1307 | struct slgt_info *info; |
1308 | ||
a18c56e5 | 1309 | seq_puts(m, "synclink_gt driver\n"); |
705b6c7b PF |
1310 | |
1311 | info = slgt_device_list; | |
1312 | while( info ) { | |
a18c56e5 | 1313 | line_info(m, info); |
705b6c7b PF |
1314 | info = info->next_device; |
1315 | } | |
a18c56e5 AD |
1316 | return 0; |
1317 | } | |
705b6c7b | 1318 | |
a18c56e5 AD |
1319 | static int synclink_gt_proc_open(struct inode *inode, struct file *file) |
1320 | { | |
1321 | return single_open(file, synclink_gt_proc_show, NULL); | |
705b6c7b PF |
1322 | } |
1323 | ||
a18c56e5 AD |
1324 | static const struct file_operations synclink_gt_proc_fops = { |
1325 | .owner = THIS_MODULE, | |
1326 | .open = synclink_gt_proc_open, | |
1327 | .read = seq_read, | |
1328 | .llseek = seq_lseek, | |
1329 | .release = single_release, | |
1330 | }; | |
1331 | ||
705b6c7b PF |
1332 | /* |
1333 | * return count of bytes in transmit buffer | |
1334 | */ | |
1335 | static int chars_in_buffer(struct tty_struct *tty) | |
1336 | { | |
1337 | struct slgt_info *info = tty->driver_data; | |
403214d0 | 1338 | int count; |
705b6c7b PF |
1339 | if (sanity_check(info, tty->name, "chars_in_buffer")) |
1340 | return 0; | |
403214d0 PF |
1341 | count = tbuf_bytes(info); |
1342 | DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); | |
1343 | return count; | |
705b6c7b PF |
1344 | } |
1345 | ||
1346 | /* | |
1347 | * signal remote device to throttle send data (our receive data) | |
1348 | */ | |
1349 | static void throttle(struct tty_struct * tty) | |
1350 | { | |
1351 | struct slgt_info *info = tty->driver_data; | |
1352 | unsigned long flags; | |
1353 | ||
1354 | if (sanity_check(info, tty->name, "throttle")) | |
1355 | return; | |
1356 | DBGINFO(("%s throttle\n", info->device_name)); | |
1357 | if (I_IXOFF(tty)) | |
1358 | send_xchar(tty, STOP_CHAR(tty)); | |
9db276f8 | 1359 | if (C_CRTSCTS(tty)) { |
705b6c7b PF |
1360 | spin_lock_irqsave(&info->lock,flags); |
1361 | info->signals &= ~SerialSignal_RTS; | |
1362 | set_signals(info); | |
1363 | spin_unlock_irqrestore(&info->lock,flags); | |
1364 | } | |
1365 | } | |
1366 | ||
1367 | /* | |
1368 | * signal remote device to stop throttling send data (our receive data) | |
1369 | */ | |
1370 | static void unthrottle(struct tty_struct * tty) | |
1371 | { | |
1372 | struct slgt_info *info = tty->driver_data; | |
1373 | unsigned long flags; | |
1374 | ||
1375 | if (sanity_check(info, tty->name, "unthrottle")) | |
1376 | return; | |
1377 | DBGINFO(("%s unthrottle\n", info->device_name)); | |
1378 | if (I_IXOFF(tty)) { | |
1379 | if (info->x_char) | |
1380 | info->x_char = 0; | |
1381 | else | |
1382 | send_xchar(tty, START_CHAR(tty)); | |
1383 | } | |
9db276f8 | 1384 | if (C_CRTSCTS(tty)) { |
705b6c7b PF |
1385 | spin_lock_irqsave(&info->lock,flags); |
1386 | info->signals |= SerialSignal_RTS; | |
1387 | set_signals(info); | |
1388 | spin_unlock_irqrestore(&info->lock,flags); | |
1389 | } | |
1390 | } | |
1391 | ||
1392 | /* | |
1393 | * set or clear transmit break condition | |
1394 | * break_state -1=set break condition, 0=clear | |
1395 | */ | |
9e98966c | 1396 | static int set_break(struct tty_struct *tty, int break_state) |
705b6c7b PF |
1397 | { |
1398 | struct slgt_info *info = tty->driver_data; | |
1399 | unsigned short value; | |
1400 | unsigned long flags; | |
1401 | ||
1402 | if (sanity_check(info, tty->name, "set_break")) | |
9e98966c | 1403 | return -EINVAL; |
705b6c7b PF |
1404 | DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); |
1405 | ||
1406 | spin_lock_irqsave(&info->lock,flags); | |
1407 | value = rd_reg16(info, TCR); | |
1408 | if (break_state == -1) | |
1409 | value |= BIT6; | |
1410 | else | |
1411 | value &= ~BIT6; | |
1412 | wr_reg16(info, TCR, value); | |
1413 | spin_unlock_irqrestore(&info->lock,flags); | |
9e98966c | 1414 | return 0; |
705b6c7b PF |
1415 | } |
1416 | ||
af69c7f9 | 1417 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
1418 | |
1419 | /** | |
1420 | * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) | |
1421 | * set encoding and frame check sequence (FCS) options | |
1422 | * | |
1423 | * dev pointer to network device structure | |
1424 | * encoding serial encoding setting | |
1425 | * parity FCS setting | |
1426 | * | |
1427 | * returns 0 if success, otherwise error code | |
1428 | */ | |
1429 | static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, | |
1430 | unsigned short parity) | |
1431 | { | |
1432 | struct slgt_info *info = dev_to_port(dev); | |
1433 | unsigned char new_encoding; | |
1434 | unsigned short new_crctype; | |
1435 | ||
1436 | /* return error if TTY interface open */ | |
8fb06c77 | 1437 | if (info->port.count) |
705b6c7b PF |
1438 | return -EBUSY; |
1439 | ||
1440 | DBGINFO(("%s hdlcdev_attach\n", info->device_name)); | |
1441 | ||
1442 | switch (encoding) | |
1443 | { | |
1444 | case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; | |
1445 | case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; | |
1446 | case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; | |
1447 | case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; | |
1448 | case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; | |
1449 | default: return -EINVAL; | |
1450 | } | |
1451 | ||
1452 | switch (parity) | |
1453 | { | |
1454 | case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; | |
1455 | case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; | |
1456 | case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; | |
1457 | default: return -EINVAL; | |
1458 | } | |
1459 | ||
1460 | info->params.encoding = new_encoding; | |
53b3531b | 1461 | info->params.crc_type = new_crctype; |
705b6c7b PF |
1462 | |
1463 | /* if network interface up, reprogram hardware */ | |
1464 | if (info->netcount) | |
1465 | program_hw(info); | |
1466 | ||
1467 | return 0; | |
1468 | } | |
1469 | ||
1470 | /** | |
1471 | * called by generic HDLC layer to send frame | |
1472 | * | |
1473 | * skb socket buffer containing HDLC frame | |
1474 | * dev pointer to network device structure | |
705b6c7b | 1475 | */ |
4c5d502d SH |
1476 | static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, |
1477 | struct net_device *dev) | |
705b6c7b PF |
1478 | { |
1479 | struct slgt_info *info = dev_to_port(dev); | |
705b6c7b PF |
1480 | unsigned long flags; |
1481 | ||
1482 | DBGINFO(("%s hdlc_xmit\n", dev->name)); | |
1483 | ||
de538eb3 PF |
1484 | if (!skb->len) |
1485 | return NETDEV_TX_OK; | |
1486 | ||
705b6c7b PF |
1487 | /* stop sending until this frame completes */ |
1488 | netif_stop_queue(dev); | |
1489 | ||
705b6c7b | 1490 | /* update network statistics */ |
198191c4 KH |
1491 | dev->stats.tx_packets++; |
1492 | dev->stats.tx_bytes += skb->len; | |
705b6c7b | 1493 | |
705b6c7b | 1494 | /* save start time for transmit timeout detection */ |
860e9538 | 1495 | netif_trans_update(dev); |
705b6c7b | 1496 | |
de538eb3 PF |
1497 | spin_lock_irqsave(&info->lock, flags); |
1498 | tx_load(info, skb->data, skb->len); | |
1499 | spin_unlock_irqrestore(&info->lock, flags); | |
1500 | ||
1501 | /* done with socket buffer, so free it */ | |
1502 | dev_kfree_skb(skb); | |
705b6c7b | 1503 | |
4c5d502d | 1504 | return NETDEV_TX_OK; |
705b6c7b PF |
1505 | } |
1506 | ||
1507 | /** | |
1508 | * called by network layer when interface enabled | |
1509 | * claim resources and initialize hardware | |
1510 | * | |
1511 | * dev pointer to network device structure | |
1512 | * | |
1513 | * returns 0 if success, otherwise error code | |
1514 | */ | |
1515 | static int hdlcdev_open(struct net_device *dev) | |
1516 | { | |
1517 | struct slgt_info *info = dev_to_port(dev); | |
1518 | int rc; | |
1519 | unsigned long flags; | |
1520 | ||
d4c63b7c PF |
1521 | if (!try_module_get(THIS_MODULE)) |
1522 | return -EBUSY; | |
1523 | ||
705b6c7b PF |
1524 | DBGINFO(("%s hdlcdev_open\n", dev->name)); |
1525 | ||
1526 | /* generic HDLC layer open processing */ | |
3236133e GKH |
1527 | rc = hdlc_open(dev); |
1528 | if (rc) | |
705b6c7b PF |
1529 | return rc; |
1530 | ||
1531 | /* arbitrate between network and tty opens */ | |
1532 | spin_lock_irqsave(&info->netlock, flags); | |
8fb06c77 | 1533 | if (info->port.count != 0 || info->netcount != 0) { |
705b6c7b PF |
1534 | DBGINFO(("%s hdlc_open busy\n", dev->name)); |
1535 | spin_unlock_irqrestore(&info->netlock, flags); | |
1536 | return -EBUSY; | |
1537 | } | |
1538 | info->netcount=1; | |
1539 | spin_unlock_irqrestore(&info->netlock, flags); | |
1540 | ||
1541 | /* claim resources and init adapter */ | |
1542 | if ((rc = startup(info)) != 0) { | |
1543 | spin_lock_irqsave(&info->netlock, flags); | |
1544 | info->netcount=0; | |
1545 | spin_unlock_irqrestore(&info->netlock, flags); | |
1546 | return rc; | |
1547 | } | |
1548 | ||
9fe8074b JP |
1549 | /* assert RTS and DTR, apply hardware settings */ |
1550 | info->signals |= SerialSignal_RTS | SerialSignal_DTR; | |
705b6c7b PF |
1551 | program_hw(info); |
1552 | ||
1553 | /* enable network layer transmit */ | |
860e9538 | 1554 | netif_trans_update(dev); |
705b6c7b PF |
1555 | netif_start_queue(dev); |
1556 | ||
1557 | /* inform generic HDLC layer of current DCD status */ | |
1558 | spin_lock_irqsave(&info->lock, flags); | |
1559 | get_signals(info); | |
1560 | spin_unlock_irqrestore(&info->lock, flags); | |
fbeff3c1 KH |
1561 | if (info->signals & SerialSignal_DCD) |
1562 | netif_carrier_on(dev); | |
1563 | else | |
1564 | netif_carrier_off(dev); | |
705b6c7b PF |
1565 | return 0; |
1566 | } | |
1567 | ||
1568 | /** | |
1569 | * called by network layer when interface is disabled | |
1570 | * shutdown hardware and release resources | |
1571 | * | |
1572 | * dev pointer to network device structure | |
1573 | * | |
1574 | * returns 0 if success, otherwise error code | |
1575 | */ | |
1576 | static int hdlcdev_close(struct net_device *dev) | |
1577 | { | |
1578 | struct slgt_info *info = dev_to_port(dev); | |
1579 | unsigned long flags; | |
1580 | ||
1581 | DBGINFO(("%s hdlcdev_close\n", dev->name)); | |
1582 | ||
1583 | netif_stop_queue(dev); | |
1584 | ||
1585 | /* shutdown adapter and release resources */ | |
1586 | shutdown(info); | |
1587 | ||
1588 | hdlc_close(dev); | |
1589 | ||
1590 | spin_lock_irqsave(&info->netlock, flags); | |
1591 | info->netcount=0; | |
1592 | spin_unlock_irqrestore(&info->netlock, flags); | |
1593 | ||
d4c63b7c | 1594 | module_put(THIS_MODULE); |
705b6c7b PF |
1595 | return 0; |
1596 | } | |
1597 | ||
1598 | /** | |
1599 | * called by network layer to process IOCTL call to network device | |
1600 | * | |
1601 | * dev pointer to network device structure | |
1602 | * ifr pointer to network interface request structure | |
1603 | * cmd IOCTL command code | |
1604 | * | |
1605 | * returns 0 if success, otherwise error code | |
1606 | */ | |
1607 | static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
1608 | { | |
1609 | const size_t size = sizeof(sync_serial_settings); | |
1610 | sync_serial_settings new_line; | |
1611 | sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; | |
1612 | struct slgt_info *info = dev_to_port(dev); | |
1613 | unsigned int flags; | |
1614 | ||
1615 | DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); | |
1616 | ||
1617 | /* return error if TTY interface open */ | |
8fb06c77 | 1618 | if (info->port.count) |
705b6c7b PF |
1619 | return -EBUSY; |
1620 | ||
1621 | if (cmd != SIOCWANDEV) | |
1622 | return hdlc_ioctl(dev, ifr, cmd); | |
1623 | ||
ed77ed61 VK |
1624 | memset(&new_line, 0, sizeof(new_line)); |
1625 | ||
705b6c7b PF |
1626 | switch(ifr->ifr_settings.type) { |
1627 | case IF_GET_IFACE: /* return current sync_serial_settings */ | |
1628 | ||
1629 | ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; | |
1630 | if (ifr->ifr_settings.size < size) { | |
1631 | ifr->ifr_settings.size = size; /* data size wanted */ | |
1632 | return -ENOBUFS; | |
1633 | } | |
1634 | ||
1635 | flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1636 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1637 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1638 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
1639 | ||
1640 | switch (flags){ | |
1641 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; | |
1642 | case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; | |
1643 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; | |
1644 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; | |
1645 | default: new_line.clock_type = CLOCK_DEFAULT; | |
1646 | } | |
1647 | ||
1648 | new_line.clock_rate = info->params.clock_speed; | |
1649 | new_line.loopback = info->params.loopback ? 1:0; | |
1650 | ||
1651 | if (copy_to_user(line, &new_line, size)) | |
1652 | return -EFAULT; | |
1653 | return 0; | |
1654 | ||
1655 | case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ | |
1656 | ||
1657 | if(!capable(CAP_NET_ADMIN)) | |
1658 | return -EPERM; | |
1659 | if (copy_from_user(&new_line, line, size)) | |
1660 | return -EFAULT; | |
1661 | ||
1662 | switch (new_line.clock_type) | |
1663 | { | |
1664 | case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; | |
1665 | case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; | |
1666 | case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; | |
1667 | case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; | |
1668 | case CLOCK_DEFAULT: flags = info->params.flags & | |
1669 | (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1670 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1671 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1672 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; | |
1673 | default: return -EINVAL; | |
1674 | } | |
1675 | ||
1676 | if (new_line.loopback != 0 && new_line.loopback != 1) | |
1677 | return -EINVAL; | |
1678 | ||
1679 | info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1680 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1681 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1682 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
1683 | info->params.flags |= flags; | |
1684 | ||
1685 | info->params.loopback = new_line.loopback; | |
1686 | ||
1687 | if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) | |
1688 | info->params.clock_speed = new_line.clock_rate; | |
1689 | else | |
1690 | info->params.clock_speed = 0; | |
1691 | ||
1692 | /* if network interface up, reprogram hardware */ | |
1693 | if (info->netcount) | |
1694 | program_hw(info); | |
1695 | return 0; | |
1696 | ||
1697 | default: | |
1698 | return hdlc_ioctl(dev, ifr, cmd); | |
1699 | } | |
1700 | } | |
1701 | ||
1702 | /** | |
1703 | * called by network layer when transmit timeout is detected | |
1704 | * | |
1705 | * dev pointer to network device structure | |
1706 | */ | |
1707 | static void hdlcdev_tx_timeout(struct net_device *dev) | |
1708 | { | |
1709 | struct slgt_info *info = dev_to_port(dev); | |
705b6c7b PF |
1710 | unsigned long flags; |
1711 | ||
1712 | DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); | |
1713 | ||
198191c4 KH |
1714 | dev->stats.tx_errors++; |
1715 | dev->stats.tx_aborted_errors++; | |
705b6c7b PF |
1716 | |
1717 | spin_lock_irqsave(&info->lock,flags); | |
1718 | tx_stop(info); | |
1719 | spin_unlock_irqrestore(&info->lock,flags); | |
1720 | ||
1721 | netif_wake_queue(dev); | |
1722 | } | |
1723 | ||
1724 | /** | |
1725 | * called by device driver when transmit completes | |
1726 | * reenable network layer transmit if stopped | |
1727 | * | |
1728 | * info pointer to device instance information | |
1729 | */ | |
1730 | static void hdlcdev_tx_done(struct slgt_info *info) | |
1731 | { | |
1732 | if (netif_queue_stopped(info->netdev)) | |
1733 | netif_wake_queue(info->netdev); | |
1734 | } | |
1735 | ||
1736 | /** | |
1737 | * called by device driver when frame received | |
1738 | * pass frame to network layer | |
1739 | * | |
1740 | * info pointer to device instance information | |
1741 | * buf pointer to buffer contianing frame data | |
1742 | * size count of data bytes in buf | |
1743 | */ | |
1744 | static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) | |
1745 | { | |
1746 | struct sk_buff *skb = dev_alloc_skb(size); | |
1747 | struct net_device *dev = info->netdev; | |
705b6c7b PF |
1748 | |
1749 | DBGINFO(("%s hdlcdev_rx\n", dev->name)); | |
1750 | ||
1751 | if (skb == NULL) { | |
1752 | DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); | |
198191c4 | 1753 | dev->stats.rx_dropped++; |
705b6c7b PF |
1754 | return; |
1755 | } | |
1756 | ||
59ae1d12 | 1757 | skb_put_data(skb, buf, size); |
705b6c7b | 1758 | |
198191c4 | 1759 | skb->protocol = hdlc_type_trans(skb, dev); |
705b6c7b | 1760 | |
198191c4 KH |
1761 | dev->stats.rx_packets++; |
1762 | dev->stats.rx_bytes += size; | |
705b6c7b PF |
1763 | |
1764 | netif_rx(skb); | |
705b6c7b PF |
1765 | } |
1766 | ||
991990a1 KH |
1767 | static const struct net_device_ops hdlcdev_ops = { |
1768 | .ndo_open = hdlcdev_open, | |
1769 | .ndo_stop = hdlcdev_close, | |
991990a1 KH |
1770 | .ndo_start_xmit = hdlc_start_xmit, |
1771 | .ndo_do_ioctl = hdlcdev_ioctl, | |
1772 | .ndo_tx_timeout = hdlcdev_tx_timeout, | |
1773 | }; | |
1774 | ||
705b6c7b PF |
1775 | /** |
1776 | * called by device driver when adding device instance | |
1777 | * do generic HDLC initialization | |
1778 | * | |
1779 | * info pointer to device instance information | |
1780 | * | |
1781 | * returns 0 if success, otherwise error code | |
1782 | */ | |
1783 | static int hdlcdev_init(struct slgt_info *info) | |
1784 | { | |
1785 | int rc; | |
1786 | struct net_device *dev; | |
1787 | hdlc_device *hdlc; | |
1788 | ||
1789 | /* allocate and initialize network and HDLC layer objects */ | |
1790 | ||
3236133e GKH |
1791 | dev = alloc_hdlcdev(info); |
1792 | if (!dev) { | |
705b6c7b PF |
1793 | printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); |
1794 | return -ENOMEM; | |
1795 | } | |
1796 | ||
1797 | /* for network layer reporting purposes only */ | |
1798 | dev->mem_start = info->phys_reg_addr; | |
1799 | dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; | |
1800 | dev->irq = info->irq_level; | |
1801 | ||
1802 | /* network layer callbacks and settings */ | |
991990a1 KH |
1803 | dev->netdev_ops = &hdlcdev_ops; |
1804 | dev->watchdog_timeo = 10 * HZ; | |
705b6c7b PF |
1805 | dev->tx_queue_len = 50; |
1806 | ||
1807 | /* generic HDLC layer callbacks and settings */ | |
1808 | hdlc = dev_to_hdlc(dev); | |
1809 | hdlc->attach = hdlcdev_attach; | |
1810 | hdlc->xmit = hdlcdev_xmit; | |
1811 | ||
1812 | /* register objects with HDLC layer */ | |
3236133e GKH |
1813 | rc = register_hdlc_device(dev); |
1814 | if (rc) { | |
705b6c7b PF |
1815 | printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); |
1816 | free_netdev(dev); | |
1817 | return rc; | |
1818 | } | |
1819 | ||
1820 | info->netdev = dev; | |
1821 | return 0; | |
1822 | } | |
1823 | ||
1824 | /** | |
1825 | * called by device driver when removing device instance | |
1826 | * do generic HDLC cleanup | |
1827 | * | |
1828 | * info pointer to device instance information | |
1829 | */ | |
1830 | static void hdlcdev_exit(struct slgt_info *info) | |
1831 | { | |
1832 | unregister_hdlc_device(info->netdev); | |
1833 | free_netdev(info->netdev); | |
1834 | info->netdev = NULL; | |
1835 | } | |
1836 | ||
1837 | #endif /* ifdef CONFIG_HDLC */ | |
1838 | ||
1839 | /* | |
1840 | * get async data from rx DMA buffers | |
1841 | */ | |
1842 | static void rx_async(struct slgt_info *info) | |
1843 | { | |
705b6c7b PF |
1844 | struct mgsl_icount *icount = &info->icount; |
1845 | unsigned int start, end; | |
1846 | unsigned char *p; | |
1847 | unsigned char status; | |
1848 | struct slgt_desc *bufs = info->rbufs; | |
1849 | int i, count; | |
33f0f88f AC |
1850 | int chars = 0; |
1851 | int stat; | |
1852 | unsigned char ch; | |
705b6c7b PF |
1853 | |
1854 | start = end = info->rbuf_current; | |
1855 | ||
1856 | while(desc_complete(bufs[end])) { | |
1857 | count = desc_count(bufs[end]) - info->rbuf_index; | |
1858 | p = bufs[end].buf + info->rbuf_index; | |
1859 | ||
1860 | DBGISR(("%s rx_async count=%d\n", info->device_name, count)); | |
1861 | DBGDATA(info, p, count, "rx"); | |
1862 | ||
1863 | for(i=0 ; i < count; i+=2, p+=2) { | |
33f0f88f | 1864 | ch = *p; |
705b6c7b PF |
1865 | icount->rx++; |
1866 | ||
33f0f88f AC |
1867 | stat = 0; |
1868 | ||
3236133e GKH |
1869 | status = *(p + 1) & (BIT1 + BIT0); |
1870 | if (status) { | |
202af6d5 | 1871 | if (status & BIT1) |
705b6c7b | 1872 | icount->parity++; |
202af6d5 | 1873 | else if (status & BIT0) |
705b6c7b PF |
1874 | icount->frame++; |
1875 | /* discard char if tty control flags say so */ | |
1876 | if (status & info->ignore_status_mask) | |
1877 | continue; | |
202af6d5 | 1878 | if (status & BIT1) |
33f0f88f | 1879 | stat = TTY_PARITY; |
202af6d5 | 1880 | else if (status & BIT0) |
33f0f88f | 1881 | stat = TTY_FRAME; |
705b6c7b | 1882 | } |
92a19f9c JS |
1883 | tty_insert_flip_char(&info->port, ch, stat); |
1884 | chars++; | |
705b6c7b PF |
1885 | } |
1886 | ||
1887 | if (i < count) { | |
1888 | /* receive buffer not completed */ | |
1889 | info->rbuf_index += i; | |
40565f19 | 1890 | mod_timer(&info->rx_timer, jiffies + 1); |
705b6c7b PF |
1891 | break; |
1892 | } | |
1893 | ||
1894 | info->rbuf_index = 0; | |
1895 | free_rbufs(info, end, end); | |
1896 | ||
1897 | if (++end == info->rbuf_count) | |
1898 | end = 0; | |
1899 | ||
1900 | /* if entire list searched then no frame available */ | |
1901 | if (end == start) | |
1902 | break; | |
1903 | } | |
1904 | ||
2e124b4a JS |
1905 | if (chars) |
1906 | tty_flip_buffer_push(&info->port); | |
705b6c7b PF |
1907 | } |
1908 | ||
1909 | /* | |
1910 | * return next bottom half action to perform | |
1911 | */ | |
1912 | static int bh_action(struct slgt_info *info) | |
1913 | { | |
1914 | unsigned long flags; | |
1915 | int rc; | |
1916 | ||
1917 | spin_lock_irqsave(&info->lock,flags); | |
1918 | ||
1919 | if (info->pending_bh & BH_RECEIVE) { | |
1920 | info->pending_bh &= ~BH_RECEIVE; | |
1921 | rc = BH_RECEIVE; | |
1922 | } else if (info->pending_bh & BH_TRANSMIT) { | |
1923 | info->pending_bh &= ~BH_TRANSMIT; | |
1924 | rc = BH_TRANSMIT; | |
1925 | } else if (info->pending_bh & BH_STATUS) { | |
1926 | info->pending_bh &= ~BH_STATUS; | |
1927 | rc = BH_STATUS; | |
1928 | } else { | |
1929 | /* Mark BH routine as complete */ | |
0fab6de0 JP |
1930 | info->bh_running = false; |
1931 | info->bh_requested = false; | |
705b6c7b PF |
1932 | rc = 0; |
1933 | } | |
1934 | ||
1935 | spin_unlock_irqrestore(&info->lock,flags); | |
1936 | ||
1937 | return rc; | |
1938 | } | |
1939 | ||
1940 | /* | |
1941 | * perform bottom half processing | |
1942 | */ | |
c4028958 | 1943 | static void bh_handler(struct work_struct *work) |
705b6c7b | 1944 | { |
c4028958 | 1945 | struct slgt_info *info = container_of(work, struct slgt_info, task); |
705b6c7b PF |
1946 | int action; |
1947 | ||
0fab6de0 | 1948 | info->bh_running = true; |
705b6c7b PF |
1949 | |
1950 | while((action = bh_action(info))) { | |
1951 | switch (action) { | |
1952 | case BH_RECEIVE: | |
1953 | DBGBH(("%s bh receive\n", info->device_name)); | |
1954 | switch(info->params.mode) { | |
1955 | case MGSL_MODE_ASYNC: | |
1956 | rx_async(info); | |
1957 | break; | |
1958 | case MGSL_MODE_HDLC: | |
1959 | while(rx_get_frame(info)); | |
1960 | break; | |
1961 | case MGSL_MODE_RAW: | |
cb10dc9a PF |
1962 | case MGSL_MODE_MONOSYNC: |
1963 | case MGSL_MODE_BISYNC: | |
9807224f | 1964 | case MGSL_MODE_XSYNC: |
705b6c7b PF |
1965 | while(rx_get_buf(info)); |
1966 | break; | |
1967 | } | |
1968 | /* restart receiver if rx DMA buffers exhausted */ | |
1969 | if (info->rx_restart) | |
1970 | rx_start(info); | |
1971 | break; | |
1972 | case BH_TRANSMIT: | |
1973 | bh_transmit(info); | |
1974 | break; | |
1975 | case BH_STATUS: | |
1976 | DBGBH(("%s bh status\n", info->device_name)); | |
1977 | info->ri_chkcount = 0; | |
1978 | info->dsr_chkcount = 0; | |
1979 | info->dcd_chkcount = 0; | |
1980 | info->cts_chkcount = 0; | |
1981 | break; | |
1982 | default: | |
1983 | DBGBH(("%s unknown action\n", info->device_name)); | |
1984 | break; | |
1985 | } | |
1986 | } | |
1987 | DBGBH(("%s bh_handler exit\n", info->device_name)); | |
1988 | } | |
1989 | ||
1990 | static void bh_transmit(struct slgt_info *info) | |
1991 | { | |
8fb06c77 | 1992 | struct tty_struct *tty = info->port.tty; |
705b6c7b PF |
1993 | |
1994 | DBGBH(("%s bh_transmit\n", info->device_name)); | |
b963a844 | 1995 | if (tty) |
705b6c7b | 1996 | tty_wakeup(tty); |
705b6c7b PF |
1997 | } |
1998 | ||
ed8485fb | 1999 | static void dsr_change(struct slgt_info *info, unsigned short status) |
705b6c7b | 2000 | { |
ed8485fb PF |
2001 | if (status & BIT3) { |
2002 | info->signals |= SerialSignal_DSR; | |
2003 | info->input_signal_events.dsr_up++; | |
2004 | } else { | |
2005 | info->signals &= ~SerialSignal_DSR; | |
2006 | info->input_signal_events.dsr_down++; | |
2007 | } | |
705b6c7b PF |
2008 | DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); |
2009 | if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { | |
2010 | slgt_irq_off(info, IRQ_DSR); | |
2011 | return; | |
2012 | } | |
2013 | info->icount.dsr++; | |
705b6c7b PF |
2014 | wake_up_interruptible(&info->status_event_wait_q); |
2015 | wake_up_interruptible(&info->event_wait_q); | |
2016 | info->pending_bh |= BH_STATUS; | |
2017 | } | |
2018 | ||
ed8485fb | 2019 | static void cts_change(struct slgt_info *info, unsigned short status) |
705b6c7b | 2020 | { |
ed8485fb PF |
2021 | if (status & BIT2) { |
2022 | info->signals |= SerialSignal_CTS; | |
2023 | info->input_signal_events.cts_up++; | |
2024 | } else { | |
2025 | info->signals &= ~SerialSignal_CTS; | |
2026 | info->input_signal_events.cts_down++; | |
2027 | } | |
705b6c7b PF |
2028 | DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); |
2029 | if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { | |
2030 | slgt_irq_off(info, IRQ_CTS); | |
2031 | return; | |
2032 | } | |
2033 | info->icount.cts++; | |
705b6c7b PF |
2034 | wake_up_interruptible(&info->status_event_wait_q); |
2035 | wake_up_interruptible(&info->event_wait_q); | |
2036 | info->pending_bh |= BH_STATUS; | |
2037 | ||
f21ec3d2 | 2038 | if (tty_port_cts_enabled(&info->port)) { |
8fb06c77 AC |
2039 | if (info->port.tty) { |
2040 | if (info->port.tty->hw_stopped) { | |
705b6c7b | 2041 | if (info->signals & SerialSignal_CTS) { |
8fb06c77 | 2042 | info->port.tty->hw_stopped = 0; |
705b6c7b PF |
2043 | info->pending_bh |= BH_TRANSMIT; |
2044 | return; | |
2045 | } | |
2046 | } else { | |
2047 | if (!(info->signals & SerialSignal_CTS)) | |
8fb06c77 | 2048 | info->port.tty->hw_stopped = 1; |
705b6c7b PF |
2049 | } |
2050 | } | |
2051 | } | |
2052 | } | |
2053 | ||
ed8485fb | 2054 | static void dcd_change(struct slgt_info *info, unsigned short status) |
705b6c7b | 2055 | { |
ed8485fb PF |
2056 | if (status & BIT1) { |
2057 | info->signals |= SerialSignal_DCD; | |
2058 | info->input_signal_events.dcd_up++; | |
2059 | } else { | |
2060 | info->signals &= ~SerialSignal_DCD; | |
2061 | info->input_signal_events.dcd_down++; | |
2062 | } | |
705b6c7b PF |
2063 | DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); |
2064 | if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { | |
2065 | slgt_irq_off(info, IRQ_DCD); | |
2066 | return; | |
2067 | } | |
2068 | info->icount.dcd++; | |
af69c7f9 | 2069 | #if SYNCLINK_GENERIC_HDLC |
fbeff3c1 KH |
2070 | if (info->netcount) { |
2071 | if (info->signals & SerialSignal_DCD) | |
2072 | netif_carrier_on(info->netdev); | |
2073 | else | |
2074 | netif_carrier_off(info->netdev); | |
2075 | } | |
705b6c7b PF |
2076 | #endif |
2077 | wake_up_interruptible(&info->status_event_wait_q); | |
2078 | wake_up_interruptible(&info->event_wait_q); | |
2079 | info->pending_bh |= BH_STATUS; | |
2080 | ||
2d68655d | 2081 | if (tty_port_check_carrier(&info->port)) { |
705b6c7b | 2082 | if (info->signals & SerialSignal_DCD) |
8fb06c77 | 2083 | wake_up_interruptible(&info->port.open_wait); |
705b6c7b | 2084 | else { |
8fb06c77 AC |
2085 | if (info->port.tty) |
2086 | tty_hangup(info->port.tty); | |
705b6c7b PF |
2087 | } |
2088 | } | |
2089 | } | |
2090 | ||
ed8485fb | 2091 | static void ri_change(struct slgt_info *info, unsigned short status) |
705b6c7b | 2092 | { |
ed8485fb PF |
2093 | if (status & BIT0) { |
2094 | info->signals |= SerialSignal_RI; | |
2095 | info->input_signal_events.ri_up++; | |
2096 | } else { | |
2097 | info->signals &= ~SerialSignal_RI; | |
2098 | info->input_signal_events.ri_down++; | |
2099 | } | |
705b6c7b PF |
2100 | DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); |
2101 | if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { | |
2102 | slgt_irq_off(info, IRQ_RI); | |
2103 | return; | |
2104 | } | |
ed8485fb | 2105 | info->icount.rng++; |
705b6c7b PF |
2106 | wake_up_interruptible(&info->status_event_wait_q); |
2107 | wake_up_interruptible(&info->event_wait_q); | |
2108 | info->pending_bh |= BH_STATUS; | |
2109 | } | |
2110 | ||
5ba5a5d2 PF |
2111 | static void isr_rxdata(struct slgt_info *info) |
2112 | { | |
2113 | unsigned int count = info->rbuf_fill_count; | |
2114 | unsigned int i = info->rbuf_fill_index; | |
2115 | unsigned short reg; | |
2116 | ||
2117 | while (rd_reg16(info, SSR) & IRQ_RXDATA) { | |
2118 | reg = rd_reg16(info, RDR); | |
2119 | DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); | |
2120 | if (desc_complete(info->rbufs[i])) { | |
2121 | /* all buffers full */ | |
2122 | rx_stop(info); | |
2123 | info->rx_restart = 1; | |
2124 | continue; | |
2125 | } | |
2126 | info->rbufs[i].buf[count++] = (unsigned char)reg; | |
2127 | /* async mode saves status byte to buffer for each data byte */ | |
2128 | if (info->params.mode == MGSL_MODE_ASYNC) | |
2129 | info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); | |
2130 | if (count == info->rbuf_fill_level || (reg & BIT10)) { | |
2131 | /* buffer full or end of frame */ | |
2132 | set_desc_count(info->rbufs[i], count); | |
2133 | set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); | |
2134 | info->rbuf_fill_count = count = 0; | |
2135 | if (++i == info->rbuf_count) | |
2136 | i = 0; | |
2137 | info->pending_bh |= BH_RECEIVE; | |
2138 | } | |
2139 | } | |
2140 | ||
2141 | info->rbuf_fill_index = i; | |
2142 | info->rbuf_fill_count = count; | |
2143 | } | |
2144 | ||
705b6c7b PF |
2145 | static void isr_serial(struct slgt_info *info) |
2146 | { | |
2147 | unsigned short status = rd_reg16(info, SSR); | |
2148 | ||
2149 | DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); | |
2150 | ||
2151 | wr_reg16(info, SSR, status); /* clear pending */ | |
2152 | ||
0fab6de0 | 2153 | info->irq_occurred = true; |
705b6c7b PF |
2154 | |
2155 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
2156 | if (status & IRQ_TXIDLE) { | |
de538eb3 | 2157 | if (info->tx_active) |
705b6c7b PF |
2158 | isr_txeom(info, status); |
2159 | } | |
5ba5a5d2 PF |
2160 | if (info->rx_pio && (status & IRQ_RXDATA)) |
2161 | isr_rxdata(info); | |
705b6c7b PF |
2162 | if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { |
2163 | info->icount.brk++; | |
2164 | /* process break detection if tty control allows */ | |
8fb06c77 | 2165 | if (info->port.tty) { |
705b6c7b PF |
2166 | if (!(status & info->ignore_status_mask)) { |
2167 | if (info->read_status_mask & MASK_BREAK) { | |
92a19f9c | 2168 | tty_insert_flip_char(&info->port, 0, TTY_BREAK); |
8fb06c77 AC |
2169 | if (info->port.flags & ASYNC_SAK) |
2170 | do_SAK(info->port.tty); | |
705b6c7b PF |
2171 | } |
2172 | } | |
2173 | } | |
2174 | } | |
2175 | } else { | |
2176 | if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) | |
2177 | isr_txeom(info, status); | |
5ba5a5d2 PF |
2178 | if (info->rx_pio && (status & IRQ_RXDATA)) |
2179 | isr_rxdata(info); | |
705b6c7b PF |
2180 | if (status & IRQ_RXIDLE) { |
2181 | if (status & RXIDLE) | |
2182 | info->icount.rxidle++; | |
2183 | else | |
2184 | info->icount.exithunt++; | |
2185 | wake_up_interruptible(&info->event_wait_q); | |
2186 | } | |
2187 | ||
2188 | if (status & IRQ_RXOVER) | |
2189 | rx_start(info); | |
2190 | } | |
2191 | ||
2192 | if (status & IRQ_DSR) | |
ed8485fb | 2193 | dsr_change(info, status); |
705b6c7b | 2194 | if (status & IRQ_CTS) |
ed8485fb | 2195 | cts_change(info, status); |
705b6c7b | 2196 | if (status & IRQ_DCD) |
ed8485fb | 2197 | dcd_change(info, status); |
705b6c7b | 2198 | if (status & IRQ_RI) |
ed8485fb | 2199 | ri_change(info, status); |
705b6c7b PF |
2200 | } |
2201 | ||
2202 | static void isr_rdma(struct slgt_info *info) | |
2203 | { | |
2204 | unsigned int status = rd_reg32(info, RDCSR); | |
2205 | ||
2206 | DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); | |
2207 | ||
2208 | /* RDCSR (rx DMA control/status) | |
2209 | * | |
2210 | * 31..07 reserved | |
2211 | * 06 save status byte to DMA buffer | |
2212 | * 05 error | |
2213 | * 04 eol (end of list) | |
2214 | * 03 eob (end of buffer) | |
2215 | * 02 IRQ enable | |
2216 | * 01 reset | |
2217 | * 00 enable | |
2218 | */ | |
2219 | wr_reg32(info, RDCSR, status); /* clear pending */ | |
2220 | ||
2221 | if (status & (BIT5 + BIT4)) { | |
2222 | DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); | |
0fab6de0 | 2223 | info->rx_restart = true; |
705b6c7b PF |
2224 | } |
2225 | info->pending_bh |= BH_RECEIVE; | |
2226 | } | |
2227 | ||
2228 | static void isr_tdma(struct slgt_info *info) | |
2229 | { | |
2230 | unsigned int status = rd_reg32(info, TDCSR); | |
2231 | ||
2232 | DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); | |
2233 | ||
2234 | /* TDCSR (tx DMA control/status) | |
2235 | * | |
2236 | * 31..06 reserved | |
2237 | * 05 error | |
2238 | * 04 eol (end of list) | |
2239 | * 03 eob (end of buffer) | |
2240 | * 02 IRQ enable | |
2241 | * 01 reset | |
2242 | * 00 enable | |
2243 | */ | |
2244 | wr_reg32(info, TDCSR, status); /* clear pending */ | |
2245 | ||
2246 | if (status & (BIT5 + BIT4 + BIT3)) { | |
2247 | // another transmit buffer has completed | |
2248 | // run bottom half to get more send data from user | |
2249 | info->pending_bh |= BH_TRANSMIT; | |
2250 | } | |
2251 | } | |
2252 | ||
de538eb3 PF |
2253 | /* |
2254 | * return true if there are unsent tx DMA buffers, otherwise false | |
2255 | * | |
2256 | * if there are unsent buffers then info->tbuf_start | |
2257 | * is set to index of first unsent buffer | |
2258 | */ | |
2259 | static bool unsent_tbufs(struct slgt_info *info) | |
2260 | { | |
2261 | unsigned int i = info->tbuf_current; | |
2262 | bool rc = false; | |
2263 | ||
2264 | /* | |
2265 | * search backwards from last loaded buffer (precedes tbuf_current) | |
2266 | * for first unsent buffer (desc_count > 0) | |
2267 | */ | |
2268 | ||
2269 | do { | |
2270 | if (i) | |
2271 | i--; | |
2272 | else | |
2273 | i = info->tbuf_count - 1; | |
2274 | if (!desc_count(info->tbufs[i])) | |
2275 | break; | |
2276 | info->tbuf_start = i; | |
2277 | rc = true; | |
2278 | } while (i != info->tbuf_current); | |
2279 | ||
2280 | return rc; | |
2281 | } | |
2282 | ||
705b6c7b PF |
2283 | static void isr_txeom(struct slgt_info *info, unsigned short status) |
2284 | { | |
2285 | DBGISR(("%s txeom status=%04x\n", info->device_name, status)); | |
2286 | ||
2287 | slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); | |
2288 | tdma_reset(info); | |
705b6c7b PF |
2289 | if (status & IRQ_TXUNDER) { |
2290 | unsigned short val = rd_reg16(info, TCR); | |
2291 | wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ | |
2292 | wr_reg16(info, TCR, val); /* clear reset bit */ | |
2293 | } | |
2294 | ||
2295 | if (info->tx_active) { | |
2296 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
2297 | if (status & IRQ_TXUNDER) | |
2298 | info->icount.txunder++; | |
2299 | else if (status & IRQ_TXIDLE) | |
2300 | info->icount.txok++; | |
2301 | } | |
2302 | ||
de538eb3 PF |
2303 | if (unsent_tbufs(info)) { |
2304 | tx_start(info); | |
2305 | update_tx_timer(info); | |
2306 | return; | |
2307 | } | |
0fab6de0 | 2308 | info->tx_active = false; |
705b6c7b PF |
2309 | |
2310 | del_timer(&info->tx_timer); | |
2311 | ||
2312 | if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { | |
2313 | info->signals &= ~SerialSignal_RTS; | |
0fab6de0 | 2314 | info->drop_rts_on_tx_done = false; |
705b6c7b PF |
2315 | set_signals(info); |
2316 | } | |
2317 | ||
af69c7f9 | 2318 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
2319 | if (info->netcount) |
2320 | hdlcdev_tx_done(info); | |
2321 | else | |
2322 | #endif | |
2323 | { | |
8fb06c77 | 2324 | if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { |
705b6c7b PF |
2325 | tx_stop(info); |
2326 | return; | |
2327 | } | |
2328 | info->pending_bh |= BH_TRANSMIT; | |
2329 | } | |
2330 | } | |
2331 | } | |
2332 | ||
0080b7aa PF |
2333 | static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) |
2334 | { | |
2335 | struct cond_wait *w, *prev; | |
2336 | ||
2337 | /* wake processes waiting for specific transitions */ | |
2338 | for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { | |
2339 | if (w->data & changed) { | |
2340 | w->data = state; | |
2341 | wake_up_interruptible(&w->q); | |
2342 | if (prev != NULL) | |
2343 | prev->next = w->next; | |
2344 | else | |
2345 | info->gpio_wait_q = w->next; | |
2346 | } else | |
2347 | prev = w; | |
2348 | } | |
2349 | } | |
2350 | ||
705b6c7b PF |
2351 | /* interrupt service routine |
2352 | * | |
2353 | * irq interrupt number | |
2354 | * dev_id device ID supplied during interrupt registration | |
705b6c7b | 2355 | */ |
a6f97b29 | 2356 | static irqreturn_t slgt_interrupt(int dummy, void *dev_id) |
705b6c7b | 2357 | { |
a6f97b29 | 2358 | struct slgt_info *info = dev_id; |
705b6c7b PF |
2359 | unsigned int gsr; |
2360 | unsigned int i; | |
2361 | ||
a6f97b29 | 2362 | DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); |
705b6c7b | 2363 | |
705b6c7b PF |
2364 | while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { |
2365 | DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); | |
0fab6de0 | 2366 | info->irq_occurred = true; |
705b6c7b PF |
2367 | for(i=0; i < info->port_count ; i++) { |
2368 | if (info->port_array[i] == NULL) | |
2369 | continue; | |
ffd7d6ba | 2370 | spin_lock(&info->port_array[i]->lock); |
705b6c7b PF |
2371 | if (gsr & (BIT8 << i)) |
2372 | isr_serial(info->port_array[i]); | |
2373 | if (gsr & (BIT16 << (i*2))) | |
2374 | isr_rdma(info->port_array[i]); | |
2375 | if (gsr & (BIT17 << (i*2))) | |
2376 | isr_tdma(info->port_array[i]); | |
ffd7d6ba | 2377 | spin_unlock(&info->port_array[i]->lock); |
705b6c7b PF |
2378 | } |
2379 | } | |
2380 | ||
0080b7aa PF |
2381 | if (info->gpio_present) { |
2382 | unsigned int state; | |
2383 | unsigned int changed; | |
ffd7d6ba | 2384 | spin_lock(&info->lock); |
0080b7aa PF |
2385 | while ((changed = rd_reg32(info, IOSR)) != 0) { |
2386 | DBGISR(("%s iosr=%08x\n", info->device_name, changed)); | |
2387 | /* read latched state of GPIO signals */ | |
2388 | state = rd_reg32(info, IOVR); | |
2389 | /* clear pending GPIO interrupt bits */ | |
2390 | wr_reg32(info, IOSR, changed); | |
2391 | for (i=0 ; i < info->port_count ; i++) { | |
2392 | if (info->port_array[i] != NULL) | |
2393 | isr_gpio(info->port_array[i], changed, state); | |
2394 | } | |
2395 | } | |
ffd7d6ba | 2396 | spin_unlock(&info->lock); |
0080b7aa PF |
2397 | } |
2398 | ||
705b6c7b PF |
2399 | for(i=0; i < info->port_count ; i++) { |
2400 | struct slgt_info *port = info->port_array[i]; | |
ffd7d6ba PF |
2401 | if (port == NULL) |
2402 | continue; | |
2403 | spin_lock(&port->lock); | |
2404 | if ((port->port.count || port->netcount) && | |
705b6c7b PF |
2405 | port->pending_bh && !port->bh_running && |
2406 | !port->bh_requested) { | |
2407 | DBGISR(("%s bh queued\n", port->device_name)); | |
2408 | schedule_work(&port->task); | |
0fab6de0 | 2409 | port->bh_requested = true; |
705b6c7b | 2410 | } |
ffd7d6ba | 2411 | spin_unlock(&port->lock); |
705b6c7b PF |
2412 | } |
2413 | ||
a6f97b29 | 2414 | DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); |
705b6c7b PF |
2415 | return IRQ_HANDLED; |
2416 | } | |
2417 | ||
2418 | static int startup(struct slgt_info *info) | |
2419 | { | |
2420 | DBGINFO(("%s startup\n", info->device_name)); | |
2421 | ||
d41861ca | 2422 | if (tty_port_initialized(&info->port)) |
705b6c7b PF |
2423 | return 0; |
2424 | ||
2425 | if (!info->tx_buf) { | |
2426 | info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); | |
2427 | if (!info->tx_buf) { | |
2428 | DBGERR(("%s can't allocate tx buffer\n", info->device_name)); | |
2429 | return -ENOMEM; | |
2430 | } | |
2431 | } | |
2432 | ||
2433 | info->pending_bh = 0; | |
2434 | ||
2435 | memset(&info->icount, 0, sizeof(info->icount)); | |
2436 | ||
2437 | /* program hardware for current parameters */ | |
2438 | change_params(info); | |
2439 | ||
8fb06c77 AC |
2440 | if (info->port.tty) |
2441 | clear_bit(TTY_IO_ERROR, &info->port.tty->flags); | |
705b6c7b | 2442 | |
d41861ca | 2443 | tty_port_set_initialized(&info->port, 1); |
705b6c7b PF |
2444 | |
2445 | return 0; | |
2446 | } | |
2447 | ||
2448 | /* | |
2449 | * called by close() and hangup() to shutdown hardware | |
2450 | */ | |
2451 | static void shutdown(struct slgt_info *info) | |
2452 | { | |
2453 | unsigned long flags; | |
2454 | ||
d41861ca | 2455 | if (!tty_port_initialized(&info->port)) |
705b6c7b PF |
2456 | return; |
2457 | ||
2458 | DBGINFO(("%s shutdown\n", info->device_name)); | |
2459 | ||
2460 | /* clear status wait queue because status changes */ | |
2461 | /* can't happen after shutting down the hardware */ | |
2462 | wake_up_interruptible(&info->status_event_wait_q); | |
2463 | wake_up_interruptible(&info->event_wait_q); | |
2464 | ||
2465 | del_timer_sync(&info->tx_timer); | |
2466 | del_timer_sync(&info->rx_timer); | |
2467 | ||
2468 | kfree(info->tx_buf); | |
2469 | info->tx_buf = NULL; | |
2470 | ||
2471 | spin_lock_irqsave(&info->lock,flags); | |
2472 | ||
2473 | tx_stop(info); | |
2474 | rx_stop(info); | |
2475 | ||
2476 | slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); | |
2477 | ||
adc8d746 | 2478 | if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { |
9fe8074b | 2479 | info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); |
705b6c7b PF |
2480 | set_signals(info); |
2481 | } | |
2482 | ||
0080b7aa PF |
2483 | flush_cond_wait(&info->gpio_wait_q); |
2484 | ||
705b6c7b PF |
2485 | spin_unlock_irqrestore(&info->lock,flags); |
2486 | ||
8fb06c77 AC |
2487 | if (info->port.tty) |
2488 | set_bit(TTY_IO_ERROR, &info->port.tty->flags); | |
705b6c7b | 2489 | |
d41861ca | 2490 | tty_port_set_initialized(&info->port, 0); |
705b6c7b PF |
2491 | } |
2492 | ||
2493 | static void program_hw(struct slgt_info *info) | |
2494 | { | |
2495 | unsigned long flags; | |
2496 | ||
2497 | spin_lock_irqsave(&info->lock,flags); | |
2498 | ||
2499 | rx_stop(info); | |
2500 | tx_stop(info); | |
2501 | ||
cb10dc9a | 2502 | if (info->params.mode != MGSL_MODE_ASYNC || |
705b6c7b | 2503 | info->netcount) |
cb10dc9a | 2504 | sync_mode(info); |
705b6c7b PF |
2505 | else |
2506 | async_mode(info); | |
2507 | ||
2508 | set_signals(info); | |
2509 | ||
2510 | info->dcd_chkcount = 0; | |
2511 | info->cts_chkcount = 0; | |
2512 | info->ri_chkcount = 0; | |
2513 | info->dsr_chkcount = 0; | |
2514 | ||
a6b2f87b | 2515 | slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); |
705b6c7b PF |
2516 | get_signals(info); |
2517 | ||
2518 | if (info->netcount || | |
adc8d746 | 2519 | (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) |
705b6c7b PF |
2520 | rx_start(info); |
2521 | ||
2522 | spin_unlock_irqrestore(&info->lock,flags); | |
2523 | } | |
2524 | ||
2525 | /* | |
2526 | * reconfigure adapter based on new parameters | |
2527 | */ | |
2528 | static void change_params(struct slgt_info *info) | |
2529 | { | |
2530 | unsigned cflag; | |
2531 | int bits_per_char; | |
2532 | ||
adc8d746 | 2533 | if (!info->port.tty) |
705b6c7b PF |
2534 | return; |
2535 | DBGINFO(("%s change_params\n", info->device_name)); | |
2536 | ||
adc8d746 | 2537 | cflag = info->port.tty->termios.c_cflag; |
705b6c7b | 2538 | |
9fe8074b JP |
2539 | /* if B0 rate (hangup) specified then negate RTS and DTR */ |
2540 | /* otherwise assert RTS and DTR */ | |
705b6c7b | 2541 | if (cflag & CBAUD) |
9fe8074b | 2542 | info->signals |= SerialSignal_RTS | SerialSignal_DTR; |
705b6c7b | 2543 | else |
9fe8074b | 2544 | info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); |
705b6c7b PF |
2545 | |
2546 | /* byte size and parity */ | |
2547 | ||
2548 | switch (cflag & CSIZE) { | |
2549 | case CS5: info->params.data_bits = 5; break; | |
2550 | case CS6: info->params.data_bits = 6; break; | |
2551 | case CS7: info->params.data_bits = 7; break; | |
2552 | case CS8: info->params.data_bits = 8; break; | |
2553 | default: info->params.data_bits = 7; break; | |
2554 | } | |
2555 | ||
2556 | info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; | |
2557 | ||
2558 | if (cflag & PARENB) | |
2559 | info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; | |
2560 | else | |
2561 | info->params.parity = ASYNC_PARITY_NONE; | |
2562 | ||
2563 | /* calculate number of jiffies to transmit a full | |
2564 | * FIFO (32 bytes) at specified data rate | |
2565 | */ | |
2566 | bits_per_char = info->params.data_bits + | |
2567 | info->params.stop_bits + 1; | |
2568 | ||
8fb06c77 | 2569 | info->params.data_rate = tty_get_baud_rate(info->port.tty); |
705b6c7b PF |
2570 | |
2571 | if (info->params.data_rate) { | |
2572 | info->timeout = (32*HZ*bits_per_char) / | |
2573 | info->params.data_rate; | |
2574 | } | |
2575 | info->timeout += HZ/50; /* Add .02 seconds of slop */ | |
2576 | ||
5604a98e | 2577 | tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); |
2d68655d | 2578 | tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); |
705b6c7b PF |
2579 | |
2580 | /* process tty input control flags */ | |
2581 | ||
2582 | info->read_status_mask = IRQ_RXOVER; | |
8fb06c77 | 2583 | if (I_INPCK(info->port.tty)) |
705b6c7b | 2584 | info->read_status_mask |= MASK_PARITY | MASK_FRAMING; |
8fb06c77 | 2585 | if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) |
705b6c7b | 2586 | info->read_status_mask |= MASK_BREAK; |
8fb06c77 | 2587 | if (I_IGNPAR(info->port.tty)) |
705b6c7b | 2588 | info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; |
8fb06c77 | 2589 | if (I_IGNBRK(info->port.tty)) { |
705b6c7b PF |
2590 | info->ignore_status_mask |= MASK_BREAK; |
2591 | /* If ignoring parity and break indicators, ignore | |
2592 | * overruns too. (For real raw support). | |
2593 | */ | |
8fb06c77 | 2594 | if (I_IGNPAR(info->port.tty)) |
705b6c7b PF |
2595 | info->ignore_status_mask |= MASK_OVERRUN; |
2596 | } | |
2597 | ||
2598 | program_hw(info); | |
2599 | } | |
2600 | ||
2601 | static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) | |
2602 | { | |
2603 | DBGINFO(("%s get_stats\n", info->device_name)); | |
2604 | if (!user_icount) { | |
2605 | memset(&info->icount, 0, sizeof(info->icount)); | |
2606 | } else { | |
2607 | if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) | |
2608 | return -EFAULT; | |
2609 | } | |
2610 | return 0; | |
2611 | } | |
2612 | ||
2613 | static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) | |
2614 | { | |
2615 | DBGINFO(("%s get_params\n", info->device_name)); | |
2616 | if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) | |
2617 | return -EFAULT; | |
2618 | return 0; | |
2619 | } | |
2620 | ||
2621 | static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) | |
2622 | { | |
2623 | unsigned long flags; | |
2624 | MGSL_PARAMS tmp_params; | |
2625 | ||
2626 | DBGINFO(("%s set_params\n", info->device_name)); | |
2627 | if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) | |
2628 | return -EFAULT; | |
2629 | ||
2630 | spin_lock_irqsave(&info->lock, flags); | |
1f80769f PF |
2631 | if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) |
2632 | info->base_clock = tmp_params.clock_speed; | |
2633 | else | |
2634 | memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); | |
705b6c7b PF |
2635 | spin_unlock_irqrestore(&info->lock, flags); |
2636 | ||
1f80769f | 2637 | program_hw(info); |
705b6c7b PF |
2638 | |
2639 | return 0; | |
2640 | } | |
2641 | ||
2642 | static int get_txidle(struct slgt_info *info, int __user *idle_mode) | |
2643 | { | |
2644 | DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); | |
2645 | if (put_user(info->idle_mode, idle_mode)) | |
2646 | return -EFAULT; | |
2647 | return 0; | |
2648 | } | |
2649 | ||
2650 | static int set_txidle(struct slgt_info *info, int idle_mode) | |
2651 | { | |
2652 | unsigned long flags; | |
2653 | DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); | |
2654 | spin_lock_irqsave(&info->lock,flags); | |
2655 | info->idle_mode = idle_mode; | |
643f3319 PF |
2656 | if (info->params.mode != MGSL_MODE_ASYNC) |
2657 | tx_set_idle(info); | |
705b6c7b PF |
2658 | spin_unlock_irqrestore(&info->lock,flags); |
2659 | return 0; | |
2660 | } | |
2661 | ||
2662 | static int tx_enable(struct slgt_info *info, int enable) | |
2663 | { | |
2664 | unsigned long flags; | |
2665 | DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); | |
2666 | spin_lock_irqsave(&info->lock,flags); | |
2667 | if (enable) { | |
2668 | if (!info->tx_enabled) | |
2669 | tx_start(info); | |
2670 | } else { | |
2671 | if (info->tx_enabled) | |
2672 | tx_stop(info); | |
2673 | } | |
2674 | spin_unlock_irqrestore(&info->lock,flags); | |
2675 | return 0; | |
2676 | } | |
2677 | ||
2678 | /* | |
2679 | * abort transmit HDLC frame | |
2680 | */ | |
2681 | static int tx_abort(struct slgt_info *info) | |
2682 | { | |
2683 | unsigned long flags; | |
2684 | DBGINFO(("%s tx_abort\n", info->device_name)); | |
2685 | spin_lock_irqsave(&info->lock,flags); | |
2686 | tdma_reset(info); | |
2687 | spin_unlock_irqrestore(&info->lock,flags); | |
2688 | return 0; | |
2689 | } | |
2690 | ||
2691 | static int rx_enable(struct slgt_info *info, int enable) | |
2692 | { | |
2693 | unsigned long flags; | |
814dae03 PF |
2694 | unsigned int rbuf_fill_level; |
2695 | DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); | |
705b6c7b | 2696 | spin_lock_irqsave(&info->lock,flags); |
814dae03 PF |
2697 | /* |
2698 | * enable[31..16] = receive DMA buffer fill level | |
2699 | * 0 = noop (leave fill level unchanged) | |
2700 | * fill level must be multiple of 4 and <= buffer size | |
2701 | */ | |
2702 | rbuf_fill_level = ((unsigned int)enable) >> 16; | |
2703 | if (rbuf_fill_level) { | |
c68a99cd PF |
2704 | if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { |
2705 | spin_unlock_irqrestore(&info->lock, flags); | |
814dae03 | 2706 | return -EINVAL; |
c68a99cd | 2707 | } |
814dae03 | 2708 | info->rbuf_fill_level = rbuf_fill_level; |
5ba5a5d2 PF |
2709 | if (rbuf_fill_level < 128) |
2710 | info->rx_pio = 1; /* PIO mode */ | |
2711 | else | |
2712 | info->rx_pio = 0; /* DMA mode */ | |
814dae03 PF |
2713 | rx_stop(info); /* restart receiver to use new fill level */ |
2714 | } | |
2715 | ||
2716 | /* | |
2717 | * enable[1..0] = receiver enable command | |
2718 | * 0 = disable | |
2719 | * 1 = enable | |
2720 | * 2 = enable or force hunt mode if already enabled | |
2721 | */ | |
2722 | enable &= 3; | |
705b6c7b PF |
2723 | if (enable) { |
2724 | if (!info->rx_enabled) | |
2725 | rx_start(info); | |
cb10dc9a PF |
2726 | else if (enable == 2) { |
2727 | /* force hunt mode (write 1 to RCR[3]) */ | |
2728 | wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); | |
2729 | } | |
705b6c7b PF |
2730 | } else { |
2731 | if (info->rx_enabled) | |
2732 | rx_stop(info); | |
2733 | } | |
2734 | spin_unlock_irqrestore(&info->lock,flags); | |
2735 | return 0; | |
2736 | } | |
2737 | ||
2738 | /* | |
2739 | * wait for specified event to occur | |
2740 | */ | |
2741 | static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) | |
2742 | { | |
2743 | unsigned long flags; | |
2744 | int s; | |
2745 | int rc=0; | |
2746 | struct mgsl_icount cprev, cnow; | |
2747 | int events; | |
2748 | int mask; | |
2749 | struct _input_signal_events oldsigs, newsigs; | |
2750 | DECLARE_WAITQUEUE(wait, current); | |
2751 | ||
2752 | if (get_user(mask, mask_ptr)) | |
2753 | return -EFAULT; | |
2754 | ||
2755 | DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); | |
2756 | ||
2757 | spin_lock_irqsave(&info->lock,flags); | |
2758 | ||
2759 | /* return immediately if state matches requested events */ | |
2760 | get_signals(info); | |
2761 | s = info->signals; | |
2762 | ||
2763 | events = mask & | |
2764 | ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + | |
2765 | ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + | |
2766 | ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + | |
2767 | ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); | |
2768 | if (events) { | |
2769 | spin_unlock_irqrestore(&info->lock,flags); | |
2770 | goto exit; | |
2771 | } | |
2772 | ||
2773 | /* save current irq counts */ | |
2774 | cprev = info->icount; | |
2775 | oldsigs = info->input_signal_events; | |
2776 | ||
2777 | /* enable hunt and idle irqs if needed */ | |
2778 | if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { | |
2779 | unsigned short val = rd_reg16(info, SCR); | |
2780 | if (!(val & IRQ_RXIDLE)) | |
2781 | wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); | |
2782 | } | |
2783 | ||
2784 | set_current_state(TASK_INTERRUPTIBLE); | |
2785 | add_wait_queue(&info->event_wait_q, &wait); | |
2786 | ||
2787 | spin_unlock_irqrestore(&info->lock,flags); | |
2788 | ||
2789 | for(;;) { | |
2790 | schedule(); | |
2791 | if (signal_pending(current)) { | |
2792 | rc = -ERESTARTSYS; | |
2793 | break; | |
2794 | } | |
2795 | ||
2796 | /* get current irq counts */ | |
2797 | spin_lock_irqsave(&info->lock,flags); | |
2798 | cnow = info->icount; | |
2799 | newsigs = info->input_signal_events; | |
2800 | set_current_state(TASK_INTERRUPTIBLE); | |
2801 | spin_unlock_irqrestore(&info->lock,flags); | |
2802 | ||
2803 | /* if no change, wait aborted for some reason */ | |
2804 | if (newsigs.dsr_up == oldsigs.dsr_up && | |
2805 | newsigs.dsr_down == oldsigs.dsr_down && | |
2806 | newsigs.dcd_up == oldsigs.dcd_up && | |
2807 | newsigs.dcd_down == oldsigs.dcd_down && | |
2808 | newsigs.cts_up == oldsigs.cts_up && | |
2809 | newsigs.cts_down == oldsigs.cts_down && | |
2810 | newsigs.ri_up == oldsigs.ri_up && | |
2811 | newsigs.ri_down == oldsigs.ri_down && | |
2812 | cnow.exithunt == cprev.exithunt && | |
2813 | cnow.rxidle == cprev.rxidle) { | |
2814 | rc = -EIO; | |
2815 | break; | |
2816 | } | |
2817 | ||
2818 | events = mask & | |
2819 | ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + | |
2820 | (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + | |
2821 | (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + | |
2822 | (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + | |
2823 | (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + | |
2824 | (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + | |
2825 | (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + | |
2826 | (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + | |
2827 | (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + | |
2828 | (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); | |
2829 | if (events) | |
2830 | break; | |
2831 | ||
2832 | cprev = cnow; | |
2833 | oldsigs = newsigs; | |
2834 | } | |
2835 | ||
2836 | remove_wait_queue(&info->event_wait_q, &wait); | |
2837 | set_current_state(TASK_RUNNING); | |
2838 | ||
2839 | ||
2840 | if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { | |
2841 | spin_lock_irqsave(&info->lock,flags); | |
2842 | if (!waitqueue_active(&info->event_wait_q)) { | |
2843 | /* disable enable exit hunt mode/idle rcvd IRQs */ | |
2844 | wr_reg16(info, SCR, | |
2845 | (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); | |
2846 | } | |
2847 | spin_unlock_irqrestore(&info->lock,flags); | |
2848 | } | |
2849 | exit: | |
2850 | if (rc == 0) | |
2851 | rc = put_user(events, mask_ptr); | |
2852 | return rc; | |
2853 | } | |
2854 | ||
2855 | static int get_interface(struct slgt_info *info, int __user *if_mode) | |
2856 | { | |
2857 | DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); | |
2858 | if (put_user(info->if_mode, if_mode)) | |
2859 | return -EFAULT; | |
2860 | return 0; | |
2861 | } | |
2862 | ||
2863 | static int set_interface(struct slgt_info *info, int if_mode) | |
2864 | { | |
2865 | unsigned long flags; | |
35fbd397 | 2866 | unsigned short val; |
705b6c7b PF |
2867 | |
2868 | DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); | |
2869 | spin_lock_irqsave(&info->lock,flags); | |
2870 | info->if_mode = if_mode; | |
2871 | ||
2872 | msc_set_vcr(info); | |
2873 | ||
2874 | /* TCR (tx control) 07 1=RTS driver control */ | |
2875 | val = rd_reg16(info, TCR); | |
2876 | if (info->if_mode & MGSL_INTERFACE_RTS_EN) | |
2877 | val |= BIT7; | |
2878 | else | |
2879 | val &= ~BIT7; | |
2880 | wr_reg16(info, TCR, val); | |
2881 | ||
2882 | spin_unlock_irqrestore(&info->lock,flags); | |
2883 | return 0; | |
2884 | } | |
2885 | ||
9807224f PF |
2886 | static int get_xsync(struct slgt_info *info, int __user *xsync) |
2887 | { | |
2888 | DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); | |
2889 | if (put_user(info->xsync, xsync)) | |
2890 | return -EFAULT; | |
2891 | return 0; | |
2892 | } | |
2893 | ||
2894 | /* | |
2895 | * set extended sync pattern (1 to 4 bytes) for extended sync mode | |
2896 | * | |
2897 | * sync pattern is contained in least significant bytes of value | |
2898 | * most significant byte of sync pattern is oldest (1st sent/detected) | |
2899 | */ | |
2900 | static int set_xsync(struct slgt_info *info, int xsync) | |
2901 | { | |
2902 | unsigned long flags; | |
2903 | ||
2904 | DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); | |
2905 | spin_lock_irqsave(&info->lock, flags); | |
2906 | info->xsync = xsync; | |
2907 | wr_reg32(info, XSR, xsync); | |
2908 | spin_unlock_irqrestore(&info->lock, flags); | |
2909 | return 0; | |
2910 | } | |
2911 | ||
2912 | static int get_xctrl(struct slgt_info *info, int __user *xctrl) | |
2913 | { | |
2914 | DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); | |
2915 | if (put_user(info->xctrl, xctrl)) | |
2916 | return -EFAULT; | |
2917 | return 0; | |
2918 | } | |
2919 | ||
2920 | /* | |
2921 | * set extended control options | |
2922 | * | |
2923 | * xctrl[31:19] reserved, must be zero | |
2924 | * xctrl[18:17] extended sync pattern length in bytes | |
2925 | * 00 = 1 byte in xsr[7:0] | |
2926 | * 01 = 2 bytes in xsr[15:0] | |
2927 | * 10 = 3 bytes in xsr[23:0] | |
2928 | * 11 = 4 bytes in xsr[31:0] | |
2929 | * xctrl[16] 1 = enable terminal count, 0=disabled | |
2930 | * xctrl[15:0] receive terminal count for fixed length packets | |
2931 | * value is count minus one (0 = 1 byte packet) | |
2932 | * when terminal count is reached, receiver | |
2933 | * automatically returns to hunt mode and receive | |
2934 | * FIFO contents are flushed to DMA buffers with | |
2935 | * end of frame (EOF) status | |
2936 | */ | |
2937 | static int set_xctrl(struct slgt_info *info, int xctrl) | |
2938 | { | |
2939 | unsigned long flags; | |
2940 | ||
2941 | DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); | |
2942 | spin_lock_irqsave(&info->lock, flags); | |
2943 | info->xctrl = xctrl; | |
2944 | wr_reg32(info, XCR, xctrl); | |
2945 | spin_unlock_irqrestore(&info->lock, flags); | |
2946 | return 0; | |
2947 | } | |
2948 | ||
0080b7aa PF |
2949 | /* |
2950 | * set general purpose IO pin state and direction | |
2951 | * | |
2952 | * user_gpio fields: | |
2953 | * state each bit indicates a pin state | |
2954 | * smask set bit indicates pin state to set | |
2955 | * dir each bit indicates a pin direction (0=input, 1=output) | |
2956 | * dmask set bit indicates pin direction to set | |
2957 | */ | |
2958 | static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) | |
2959 | { | |
2960 | unsigned long flags; | |
2961 | struct gpio_desc gpio; | |
2962 | __u32 data; | |
2963 | ||
2964 | if (!info->gpio_present) | |
2965 | return -EINVAL; | |
2966 | if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) | |
2967 | return -EFAULT; | |
2968 | DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", | |
2969 | info->device_name, gpio.state, gpio.smask, | |
2970 | gpio.dir, gpio.dmask)); | |
2971 | ||
ffd7d6ba | 2972 | spin_lock_irqsave(&info->port_array[0]->lock, flags); |
0080b7aa PF |
2973 | if (gpio.dmask) { |
2974 | data = rd_reg32(info, IODR); | |
2975 | data |= gpio.dmask & gpio.dir; | |
2976 | data &= ~(gpio.dmask & ~gpio.dir); | |
2977 | wr_reg32(info, IODR, data); | |
2978 | } | |
2979 | if (gpio.smask) { | |
2980 | data = rd_reg32(info, IOVR); | |
2981 | data |= gpio.smask & gpio.state; | |
2982 | data &= ~(gpio.smask & ~gpio.state); | |
2983 | wr_reg32(info, IOVR, data); | |
2984 | } | |
ffd7d6ba | 2985 | spin_unlock_irqrestore(&info->port_array[0]->lock, flags); |
0080b7aa PF |
2986 | |
2987 | return 0; | |
2988 | } | |
2989 | ||
2990 | /* | |
2991 | * get general purpose IO pin state and direction | |
2992 | */ | |
2993 | static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) | |
2994 | { | |
2995 | struct gpio_desc gpio; | |
2996 | if (!info->gpio_present) | |
2997 | return -EINVAL; | |
2998 | gpio.state = rd_reg32(info, IOVR); | |
2999 | gpio.smask = 0xffffffff; | |
3000 | gpio.dir = rd_reg32(info, IODR); | |
3001 | gpio.dmask = 0xffffffff; | |
3002 | if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) | |
3003 | return -EFAULT; | |
3004 | DBGINFO(("%s get_gpio state=%08x dir=%08x\n", | |
3005 | info->device_name, gpio.state, gpio.dir)); | |
3006 | return 0; | |
3007 | } | |
3008 | ||
3009 | /* | |
3010 | * conditional wait facility | |
3011 | */ | |
3012 | static void init_cond_wait(struct cond_wait *w, unsigned int data) | |
3013 | { | |
3014 | init_waitqueue_head(&w->q); | |
3015 | init_waitqueue_entry(&w->wait, current); | |
3016 | w->data = data; | |
3017 | } | |
3018 | ||
3019 | static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) | |
3020 | { | |
3021 | set_current_state(TASK_INTERRUPTIBLE); | |
3022 | add_wait_queue(&w->q, &w->wait); | |
3023 | w->next = *head; | |
3024 | *head = w; | |
3025 | } | |
3026 | ||
3027 | static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) | |
3028 | { | |
3029 | struct cond_wait *w, *prev; | |
3030 | remove_wait_queue(&cw->q, &cw->wait); | |
3031 | set_current_state(TASK_RUNNING); | |
3032 | for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { | |
3033 | if (w == cw) { | |
3034 | if (prev != NULL) | |
3035 | prev->next = w->next; | |
3036 | else | |
3037 | *head = w->next; | |
3038 | break; | |
3039 | } | |
3040 | } | |
3041 | } | |
3042 | ||
3043 | static void flush_cond_wait(struct cond_wait **head) | |
3044 | { | |
3045 | while (*head != NULL) { | |
3046 | wake_up_interruptible(&(*head)->q); | |
3047 | *head = (*head)->next; | |
3048 | } | |
3049 | } | |
3050 | ||
3051 | /* | |
3052 | * wait for general purpose I/O pin(s) to enter specified state | |
3053 | * | |
3054 | * user_gpio fields: | |
3055 | * state - bit indicates target pin state | |
3056 | * smask - set bit indicates watched pin | |
3057 | * | |
3058 | * The wait ends when at least one watched pin enters the specified | |
3059 | * state. When 0 (no error) is returned, user_gpio->state is set to the | |
3060 | * state of all GPIO pins when the wait ends. | |
3061 | * | |
3062 | * Note: Each pin may be a dedicated input, dedicated output, or | |
3063 | * configurable input/output. The number and configuration of pins | |
3064 | * varies with the specific adapter model. Only input pins (dedicated | |
3065 | * or configured) can be monitored with this function. | |
3066 | */ | |
3067 | static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) | |
3068 | { | |
3069 | unsigned long flags; | |
3070 | int rc = 0; | |
3071 | struct gpio_desc gpio; | |
3072 | struct cond_wait wait; | |
3073 | u32 state; | |
3074 | ||
3075 | if (!info->gpio_present) | |
3076 | return -EINVAL; | |
3077 | if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) | |
3078 | return -EFAULT; | |
3079 | DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", | |
3080 | info->device_name, gpio.state, gpio.smask)); | |
3081 | /* ignore output pins identified by set IODR bit */ | |
3082 | if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) | |
3083 | return -EINVAL; | |
3084 | init_cond_wait(&wait, gpio.smask); | |
3085 | ||
ffd7d6ba | 3086 | spin_lock_irqsave(&info->port_array[0]->lock, flags); |
0080b7aa PF |
3087 | /* enable interrupts for watched pins */ |
3088 | wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); | |
3089 | /* get current pin states */ | |
3090 | state = rd_reg32(info, IOVR); | |
3091 | ||
3092 | if (gpio.smask & ~(state ^ gpio.state)) { | |
3093 | /* already in target state */ | |
3094 | gpio.state = state; | |
3095 | } else { | |
3096 | /* wait for target state */ | |
3097 | add_cond_wait(&info->gpio_wait_q, &wait); | |
ffd7d6ba | 3098 | spin_unlock_irqrestore(&info->port_array[0]->lock, flags); |
0080b7aa PF |
3099 | schedule(); |
3100 | if (signal_pending(current)) | |
3101 | rc = -ERESTARTSYS; | |
3102 | else | |
3103 | gpio.state = wait.data; | |
ffd7d6ba | 3104 | spin_lock_irqsave(&info->port_array[0]->lock, flags); |
0080b7aa PF |
3105 | remove_cond_wait(&info->gpio_wait_q, &wait); |
3106 | } | |
3107 | ||
3108 | /* disable all GPIO interrupts if no waiting processes */ | |
3109 | if (info->gpio_wait_q == NULL) | |
3110 | wr_reg32(info, IOER, 0); | |
ffd7d6ba | 3111 | spin_unlock_irqrestore(&info->port_array[0]->lock, flags); |
0080b7aa PF |
3112 | |
3113 | if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) | |
3114 | rc = -EFAULT; | |
3115 | return rc; | |
3116 | } | |
3117 | ||
705b6c7b PF |
3118 | static int modem_input_wait(struct slgt_info *info,int arg) |
3119 | { | |
3120 | unsigned long flags; | |
3121 | int rc; | |
3122 | struct mgsl_icount cprev, cnow; | |
3123 | DECLARE_WAITQUEUE(wait, current); | |
3124 | ||
3125 | /* save current irq counts */ | |
3126 | spin_lock_irqsave(&info->lock,flags); | |
3127 | cprev = info->icount; | |
3128 | add_wait_queue(&info->status_event_wait_q, &wait); | |
3129 | set_current_state(TASK_INTERRUPTIBLE); | |
3130 | spin_unlock_irqrestore(&info->lock,flags); | |
3131 | ||
3132 | for(;;) { | |
3133 | schedule(); | |
3134 | if (signal_pending(current)) { | |
3135 | rc = -ERESTARTSYS; | |
3136 | break; | |
3137 | } | |
3138 | ||
3139 | /* get new irq counts */ | |
3140 | spin_lock_irqsave(&info->lock,flags); | |
3141 | cnow = info->icount; | |
3142 | set_current_state(TASK_INTERRUPTIBLE); | |
3143 | spin_unlock_irqrestore(&info->lock,flags); | |
3144 | ||
3145 | /* if no change, wait aborted for some reason */ | |
3146 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && | |
3147 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { | |
3148 | rc = -EIO; | |
3149 | break; | |
3150 | } | |
3151 | ||
3152 | /* check for change in caller specified modem input */ | |
3153 | if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || | |
3154 | (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || | |
3155 | (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || | |
3156 | (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { | |
3157 | rc = 0; | |
3158 | break; | |
3159 | } | |
3160 | ||
3161 | cprev = cnow; | |
3162 | } | |
3163 | remove_wait_queue(&info->status_event_wait_q, &wait); | |
3164 | set_current_state(TASK_RUNNING); | |
3165 | return rc; | |
3166 | } | |
3167 | ||
3168 | /* | |
3169 | * return state of serial control and status signals | |
3170 | */ | |
60b33c13 | 3171 | static int tiocmget(struct tty_struct *tty) |
705b6c7b PF |
3172 | { |
3173 | struct slgt_info *info = tty->driver_data; | |
3174 | unsigned int result; | |
3175 | unsigned long flags; | |
3176 | ||
3177 | spin_lock_irqsave(&info->lock,flags); | |
3178 | get_signals(info); | |
3179 | spin_unlock_irqrestore(&info->lock,flags); | |
3180 | ||
3181 | result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + | |
3182 | ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + | |
3183 | ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + | |
3184 | ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + | |
3185 | ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + | |
3186 | ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); | |
3187 | ||
3188 | DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); | |
3189 | return result; | |
3190 | } | |
3191 | ||
3192 | /* | |
3193 | * set modem control signals (DTR/RTS) | |
3194 | * | |
3195 | * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit | |
3196 | * TIOCMSET = set/clear signal values | |
3197 | * value bit mask for command | |
3198 | */ | |
20b9d177 | 3199 | static int tiocmset(struct tty_struct *tty, |
705b6c7b PF |
3200 | unsigned int set, unsigned int clear) |
3201 | { | |
3202 | struct slgt_info *info = tty->driver_data; | |
3203 | unsigned long flags; | |
3204 | ||
3205 | DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); | |
3206 | ||
3207 | if (set & TIOCM_RTS) | |
3208 | info->signals |= SerialSignal_RTS; | |
3209 | if (set & TIOCM_DTR) | |
3210 | info->signals |= SerialSignal_DTR; | |
3211 | if (clear & TIOCM_RTS) | |
3212 | info->signals &= ~SerialSignal_RTS; | |
3213 | if (clear & TIOCM_DTR) | |
3214 | info->signals &= ~SerialSignal_DTR; | |
3215 | ||
3216 | spin_lock_irqsave(&info->lock,flags); | |
3217 | set_signals(info); | |
3218 | spin_unlock_irqrestore(&info->lock,flags); | |
3219 | return 0; | |
3220 | } | |
3221 | ||
31f35939 AC |
3222 | static int carrier_raised(struct tty_port *port) |
3223 | { | |
3224 | unsigned long flags; | |
3225 | struct slgt_info *info = container_of(port, struct slgt_info, port); | |
3226 | ||
3227 | spin_lock_irqsave(&info->lock,flags); | |
3228 | get_signals(info); | |
3229 | spin_unlock_irqrestore(&info->lock,flags); | |
3230 | return (info->signals & SerialSignal_DCD) ? 1 : 0; | |
3231 | } | |
3232 | ||
fcc8ac18 | 3233 | static void dtr_rts(struct tty_port *port, int on) |
5d951fb4 AC |
3234 | { |
3235 | unsigned long flags; | |
3236 | struct slgt_info *info = container_of(port, struct slgt_info, port); | |
3237 | ||
3238 | spin_lock_irqsave(&info->lock,flags); | |
fcc8ac18 | 3239 | if (on) |
9fe8074b | 3240 | info->signals |= SerialSignal_RTS | SerialSignal_DTR; |
fcc8ac18 | 3241 | else |
9fe8074b | 3242 | info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); |
5d951fb4 AC |
3243 | set_signals(info); |
3244 | spin_unlock_irqrestore(&info->lock,flags); | |
3245 | } | |
3246 | ||
3247 | ||
705b6c7b PF |
3248 | /* |
3249 | * block current process until the device is ready to open | |
3250 | */ | |
3251 | static int block_til_ready(struct tty_struct *tty, struct file *filp, | |
3252 | struct slgt_info *info) | |
3253 | { | |
3254 | DECLARE_WAITQUEUE(wait, current); | |
3255 | int retval; | |
0fab6de0 | 3256 | bool do_clocal = false; |
705b6c7b | 3257 | unsigned long flags; |
31f35939 AC |
3258 | int cd; |
3259 | struct tty_port *port = &info->port; | |
705b6c7b PF |
3260 | |
3261 | DBGINFO(("%s block_til_ready\n", tty->driver->name)); | |
3262 | ||
18900ca6 | 3263 | if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { |
705b6c7b | 3264 | /* nonblock mode is set or port is not enabled */ |
807c8d81 | 3265 | tty_port_set_active(port, 1); |
705b6c7b PF |
3266 | return 0; |
3267 | } | |
3268 | ||
9db276f8 | 3269 | if (C_CLOCAL(tty)) |
0fab6de0 | 3270 | do_clocal = true; |
705b6c7b PF |
3271 | |
3272 | /* Wait for carrier detect and the line to become | |
3273 | * free (i.e., not in use by the callout). While we are in | |
31f35939 | 3274 | * this loop, port->count is dropped by one, so that |
705b6c7b PF |
3275 | * close() knows when to free things. We restore it upon |
3276 | * exit, either normal or abnormal. | |
3277 | */ | |
3278 | ||
3279 | retval = 0; | |
31f35939 | 3280 | add_wait_queue(&port->open_wait, &wait); |
705b6c7b PF |
3281 | |
3282 | spin_lock_irqsave(&info->lock, flags); | |
e359a4e3 | 3283 | port->count--; |
705b6c7b | 3284 | spin_unlock_irqrestore(&info->lock, flags); |
31f35939 | 3285 | port->blocked_open++; |
705b6c7b PF |
3286 | |
3287 | while (1) { | |
d41861ca | 3288 | if (C_BAUD(tty) && tty_port_initialized(port)) |
5d951fb4 | 3289 | tty_port_raise_dtr_rts(port); |
705b6c7b PF |
3290 | |
3291 | set_current_state(TASK_INTERRUPTIBLE); | |
3292 | ||
d41861ca | 3293 | if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { |
31f35939 | 3294 | retval = (port->flags & ASYNC_HUP_NOTIFY) ? |
705b6c7b PF |
3295 | -EAGAIN : -ERESTARTSYS; |
3296 | break; | |
3297 | } | |
3298 | ||
31f35939 | 3299 | cd = tty_port_carrier_raised(port); |
fef062cb PH |
3300 | if (do_clocal || cd) |
3301 | break; | |
705b6c7b PF |
3302 | |
3303 | if (signal_pending(current)) { | |
3304 | retval = -ERESTARTSYS; | |
3305 | break; | |
3306 | } | |
3307 | ||
3308 | DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); | |
89c8d91e | 3309 | tty_unlock(tty); |
705b6c7b | 3310 | schedule(); |
89c8d91e | 3311 | tty_lock(tty); |
705b6c7b PF |
3312 | } |
3313 | ||
3314 | set_current_state(TASK_RUNNING); | |
31f35939 | 3315 | remove_wait_queue(&port->open_wait, &wait); |
705b6c7b | 3316 | |
e359a4e3 | 3317 | if (!tty_hung_up_p(filp)) |
31f35939 AC |
3318 | port->count++; |
3319 | port->blocked_open--; | |
705b6c7b PF |
3320 | |
3321 | if (!retval) | |
807c8d81 | 3322 | tty_port_set_active(port, 1); |
705b6c7b PF |
3323 | |
3324 | DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); | |
3325 | return retval; | |
3326 | } | |
3327 | ||
a6b68a69 PF |
3328 | /* |
3329 | * allocate buffers used for calling line discipline receive_buf | |
3330 | * directly in synchronous mode | |
3331 | * note: add 5 bytes to max frame size to allow appending | |
3332 | * 32-bit CRC and status byte when configured to do so | |
3333 | */ | |
705b6c7b PF |
3334 | static int alloc_tmp_rbuf(struct slgt_info *info) |
3335 | { | |
04b374d0 | 3336 | info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); |
705b6c7b PF |
3337 | if (info->tmp_rbuf == NULL) |
3338 | return -ENOMEM; | |
a6b68a69 PF |
3339 | /* unused flag buffer to satisfy receive_buf calling interface */ |
3340 | info->flag_buf = kzalloc(info->max_frame_size + 5, GFP_KERNEL); | |
3341 | if (!info->flag_buf) { | |
3342 | kfree(info->tmp_rbuf); | |
3343 | info->tmp_rbuf = NULL; | |
3344 | return -ENOMEM; | |
3345 | } | |
705b6c7b PF |
3346 | return 0; |
3347 | } | |
3348 | ||
3349 | static void free_tmp_rbuf(struct slgt_info *info) | |
3350 | { | |
3351 | kfree(info->tmp_rbuf); | |
3352 | info->tmp_rbuf = NULL; | |
a6b68a69 PF |
3353 | kfree(info->flag_buf); |
3354 | info->flag_buf = NULL; | |
705b6c7b PF |
3355 | } |
3356 | ||
3357 | /* | |
3358 | * allocate DMA descriptor lists. | |
3359 | */ | |
3360 | static int alloc_desc(struct slgt_info *info) | |
3361 | { | |
3362 | unsigned int i; | |
3363 | unsigned int pbufs; | |
3364 | ||
3365 | /* allocate memory to hold descriptor lists */ | |
d54d7796 JP |
3366 | info->bufs = pci_zalloc_consistent(info->pdev, DESC_LIST_SIZE, |
3367 | &info->bufs_dma_addr); | |
705b6c7b PF |
3368 | if (info->bufs == NULL) |
3369 | return -ENOMEM; | |
3370 | ||
705b6c7b PF |
3371 | info->rbufs = (struct slgt_desc*)info->bufs; |
3372 | info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; | |
3373 | ||
3374 | pbufs = (unsigned int)info->bufs_dma_addr; | |
3375 | ||
3376 | /* | |
3377 | * Build circular lists of descriptors | |
3378 | */ | |
3379 | ||
3380 | for (i=0; i < info->rbuf_count; i++) { | |
3381 | /* physical address of this descriptor */ | |
3382 | info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); | |
3383 | ||
3384 | /* physical address of next descriptor */ | |
3385 | if (i == info->rbuf_count - 1) | |
3386 | info->rbufs[i].next = cpu_to_le32(pbufs); | |
3387 | else | |
3388 | info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); | |
3389 | set_desc_count(info->rbufs[i], DMABUFSIZE); | |
3390 | } | |
3391 | ||
3392 | for (i=0; i < info->tbuf_count; i++) { | |
3393 | /* physical address of this descriptor */ | |
3394 | info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); | |
3395 | ||
3396 | /* physical address of next descriptor */ | |
3397 | if (i == info->tbuf_count - 1) | |
3398 | info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); | |
3399 | else | |
3400 | info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); | |
3401 | } | |
3402 | ||
3403 | return 0; | |
3404 | } | |
3405 | ||
3406 | static void free_desc(struct slgt_info *info) | |
3407 | { | |
3408 | if (info->bufs != NULL) { | |
3409 | pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr); | |
3410 | info->bufs = NULL; | |
3411 | info->rbufs = NULL; | |
3412 | info->tbufs = NULL; | |
3413 | } | |
3414 | } | |
3415 | ||
3416 | static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) | |
3417 | { | |
3418 | int i; | |
3419 | for (i=0; i < count; i++) { | |
3420 | if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL) | |
3421 | return -ENOMEM; | |
3422 | bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); | |
3423 | } | |
3424 | return 0; | |
3425 | } | |
3426 | ||
3427 | static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) | |
3428 | { | |
3429 | int i; | |
3430 | for (i=0; i < count; i++) { | |
3431 | if (bufs[i].buf == NULL) | |
3432 | continue; | |
3433 | pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr); | |
3434 | bufs[i].buf = NULL; | |
3435 | } | |
3436 | } | |
3437 | ||
3438 | static int alloc_dma_bufs(struct slgt_info *info) | |
3439 | { | |
3440 | info->rbuf_count = 32; | |
3441 | info->tbuf_count = 32; | |
3442 | ||
3443 | if (alloc_desc(info) < 0 || | |
3444 | alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || | |
3445 | alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || | |
3446 | alloc_tmp_rbuf(info) < 0) { | |
3447 | DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); | |
3448 | return -ENOMEM; | |
3449 | } | |
3450 | reset_rbufs(info); | |
3451 | return 0; | |
3452 | } | |
3453 | ||
3454 | static void free_dma_bufs(struct slgt_info *info) | |
3455 | { | |
3456 | if (info->bufs) { | |
3457 | free_bufs(info, info->rbufs, info->rbuf_count); | |
3458 | free_bufs(info, info->tbufs, info->tbuf_count); | |
3459 | free_desc(info); | |
3460 | } | |
3461 | free_tmp_rbuf(info); | |
3462 | } | |
3463 | ||
3464 | static int claim_resources(struct slgt_info *info) | |
3465 | { | |
3466 | if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { | |
3467 | DBGERR(("%s reg addr conflict, addr=%08X\n", | |
3468 | info->device_name, info->phys_reg_addr)); | |
3469 | info->init_error = DiagStatus_AddressConflict; | |
3470 | goto errout; | |
3471 | } | |
3472 | else | |
0fab6de0 | 3473 | info->reg_addr_requested = true; |
705b6c7b | 3474 | |
24cb2335 | 3475 | info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE); |
705b6c7b | 3476 | if (!info->reg_addr) { |
25985edc | 3477 | DBGERR(("%s can't map device registers, addr=%08X\n", |
705b6c7b PF |
3478 | info->device_name, info->phys_reg_addr)); |
3479 | info->init_error = DiagStatus_CantAssignPciResources; | |
3480 | goto errout; | |
3481 | } | |
705b6c7b PF |
3482 | return 0; |
3483 | ||
3484 | errout: | |
3485 | release_resources(info); | |
3486 | return -ENODEV; | |
3487 | } | |
3488 | ||
3489 | static void release_resources(struct slgt_info *info) | |
3490 | { | |
3491 | if (info->irq_requested) { | |
3492 | free_irq(info->irq_level, info); | |
0fab6de0 | 3493 | info->irq_requested = false; |
705b6c7b PF |
3494 | } |
3495 | ||
3496 | if (info->reg_addr_requested) { | |
3497 | release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); | |
0fab6de0 | 3498 | info->reg_addr_requested = false; |
705b6c7b PF |
3499 | } |
3500 | ||
3501 | if (info->reg_addr) { | |
0c8365ec | 3502 | iounmap(info->reg_addr); |
705b6c7b PF |
3503 | info->reg_addr = NULL; |
3504 | } | |
3505 | } | |
3506 | ||
3507 | /* Add the specified device instance data structure to the | |
3508 | * global linked list of devices and increment the device count. | |
3509 | */ | |
3510 | static void add_device(struct slgt_info *info) | |
3511 | { | |
3512 | char *devstr; | |
3513 | ||
3514 | info->next_device = NULL; | |
3515 | info->line = slgt_device_count; | |
3516 | sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); | |
3517 | ||
3518 | if (info->line < MAX_DEVICES) { | |
3519 | if (maxframe[info->line]) | |
3520 | info->max_frame_size = maxframe[info->line]; | |
705b6c7b PF |
3521 | } |
3522 | ||
3523 | slgt_device_count++; | |
3524 | ||
3525 | if (!slgt_device_list) | |
3526 | slgt_device_list = info; | |
3527 | else { | |
3528 | struct slgt_info *current_dev = slgt_device_list; | |
3529 | while(current_dev->next_device) | |
3530 | current_dev = current_dev->next_device; | |
3531 | current_dev->next_device = info; | |
3532 | } | |
3533 | ||
3534 | if (info->max_frame_size < 4096) | |
3535 | info->max_frame_size = 4096; | |
3536 | else if (info->max_frame_size > 65535) | |
3537 | info->max_frame_size = 65535; | |
3538 | ||
3539 | switch(info->pdev->device) { | |
3540 | case SYNCLINK_GT_DEVICE_ID: | |
3541 | devstr = "GT"; | |
3542 | break; | |
6f84be84 PF |
3543 | case SYNCLINK_GT2_DEVICE_ID: |
3544 | devstr = "GT2"; | |
3545 | break; | |
705b6c7b PF |
3546 | case SYNCLINK_GT4_DEVICE_ID: |
3547 | devstr = "GT4"; | |
3548 | break; | |
3549 | case SYNCLINK_AC_DEVICE_ID: | |
3550 | devstr = "AC"; | |
3551 | info->params.mode = MGSL_MODE_ASYNC; | |
3552 | break; | |
3553 | default: | |
3554 | devstr = "(unknown model)"; | |
3555 | } | |
3556 | printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", | |
3557 | devstr, info->device_name, info->phys_reg_addr, | |
3558 | info->irq_level, info->max_frame_size); | |
3559 | ||
af69c7f9 | 3560 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
3561 | hdlcdev_init(info); |
3562 | #endif | |
3563 | } | |
3564 | ||
31f35939 AC |
3565 | static const struct tty_port_operations slgt_port_ops = { |
3566 | .carrier_raised = carrier_raised, | |
fcc8ac18 | 3567 | .dtr_rts = dtr_rts, |
31f35939 AC |
3568 | }; |
3569 | ||
705b6c7b PF |
3570 | /* |
3571 | * allocate device instance structure, return NULL on failure | |
3572 | */ | |
3573 | static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) | |
3574 | { | |
3575 | struct slgt_info *info; | |
3576 | ||
dd00cc48 | 3577 | info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); |
705b6c7b PF |
3578 | |
3579 | if (!info) { | |
3580 | DBGERR(("%s device alloc failed adapter=%d port=%d\n", | |
3581 | driver_name, adapter_num, port_num)); | |
3582 | } else { | |
44b7d1b3 | 3583 | tty_port_init(&info->port); |
31f35939 | 3584 | info->port.ops = &slgt_port_ops; |
705b6c7b | 3585 | info->magic = MGSL_MAGIC; |
c4028958 | 3586 | INIT_WORK(&info->task, bh_handler); |
705b6c7b | 3587 | info->max_frame_size = 4096; |
1f80769f | 3588 | info->base_clock = 14745600; |
814dae03 | 3589 | info->rbuf_fill_level = DMABUFSIZE; |
44b7d1b3 AC |
3590 | info->port.close_delay = 5*HZ/10; |
3591 | info->port.closing_wait = 30*HZ; | |
705b6c7b PF |
3592 | init_waitqueue_head(&info->status_event_wait_q); |
3593 | init_waitqueue_head(&info->event_wait_q); | |
3594 | spin_lock_init(&info->netlock); | |
3595 | memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); | |
3596 | info->idle_mode = HDLC_TXIDLE_FLAGS; | |
3597 | info->adapter_num = adapter_num; | |
3598 | info->port_num = port_num; | |
3599 | ||
e99e88a9 KC |
3600 | timer_setup(&info->tx_timer, tx_timeout, 0); |
3601 | timer_setup(&info->rx_timer, rx_timeout, 0); | |
705b6c7b PF |
3602 | |
3603 | /* Copy configuration info to device instance data */ | |
3604 | info->pdev = pdev; | |
3605 | info->irq_level = pdev->irq; | |
3606 | info->phys_reg_addr = pci_resource_start(pdev,0); | |
3607 | ||
705b6c7b | 3608 | info->bus_type = MGSL_BUS_TYPE_PCI; |
0f2ed4c6 | 3609 | info->irq_flags = IRQF_SHARED; |
705b6c7b PF |
3610 | |
3611 | info->init_error = -1; /* assume error, set to 0 on successful init */ | |
3612 | } | |
3613 | ||
3614 | return info; | |
3615 | } | |
3616 | ||
3617 | static void device_init(int adapter_num, struct pci_dev *pdev) | |
3618 | { | |
3619 | struct slgt_info *port_array[SLGT_MAX_PORTS]; | |
3620 | int i; | |
3621 | int port_count = 1; | |
3622 | ||
6f84be84 PF |
3623 | if (pdev->device == SYNCLINK_GT2_DEVICE_ID) |
3624 | port_count = 2; | |
3625 | else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) | |
705b6c7b PF |
3626 | port_count = 4; |
3627 | ||
3628 | /* allocate device instances for all ports */ | |
3629 | for (i=0; i < port_count; ++i) { | |
3630 | port_array[i] = alloc_dev(adapter_num, i, pdev); | |
3631 | if (port_array[i] == NULL) { | |
191c5f10 JS |
3632 | for (--i; i >= 0; --i) { |
3633 | tty_port_destroy(&port_array[i]->port); | |
705b6c7b | 3634 | kfree(port_array[i]); |
191c5f10 | 3635 | } |
705b6c7b PF |
3636 | return; |
3637 | } | |
3638 | } | |
3639 | ||
3640 | /* give copy of port_array to all ports and add to device list */ | |
3641 | for (i=0; i < port_count; ++i) { | |
3642 | memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); | |
3643 | add_device(port_array[i]); | |
3644 | port_array[i]->port_count = port_count; | |
3645 | spin_lock_init(&port_array[i]->lock); | |
3646 | } | |
3647 | ||
3648 | /* Allocate and claim adapter resources */ | |
3649 | if (!claim_resources(port_array[0])) { | |
3650 | ||
3651 | alloc_dma_bufs(port_array[0]); | |
3652 | ||
3653 | /* copy resource information from first port to others */ | |
3654 | for (i = 1; i < port_count; ++i) { | |
705b6c7b PF |
3655 | port_array[i]->irq_level = port_array[0]->irq_level; |
3656 | port_array[i]->reg_addr = port_array[0]->reg_addr; | |
3657 | alloc_dma_bufs(port_array[i]); | |
3658 | } | |
3659 | ||
3660 | if (request_irq(port_array[0]->irq_level, | |
3661 | slgt_interrupt, | |
3662 | port_array[0]->irq_flags, | |
3663 | port_array[0]->device_name, | |
3664 | port_array[0]) < 0) { | |
3665 | DBGERR(("%s request_irq failed IRQ=%d\n", | |
3666 | port_array[0]->device_name, | |
3667 | port_array[0]->irq_level)); | |
3668 | } else { | |
0fab6de0 | 3669 | port_array[0]->irq_requested = true; |
705b6c7b | 3670 | adapter_test(port_array[0]); |
0080b7aa | 3671 | for (i=1 ; i < port_count ; i++) { |
705b6c7b | 3672 | port_array[i]->init_error = port_array[0]->init_error; |
0080b7aa PF |
3673 | port_array[i]->gpio_present = port_array[0]->gpio_present; |
3674 | } | |
705b6c7b PF |
3675 | } |
3676 | } | |
62eb5b1f | 3677 | |
734cc178 JS |
3678 | for (i = 0; i < port_count; ++i) { |
3679 | struct slgt_info *info = port_array[i]; | |
3680 | tty_port_register_device(&info->port, serial_driver, info->line, | |
3681 | &info->pdev->dev); | |
3682 | } | |
705b6c7b PF |
3683 | } |
3684 | ||
9671f099 | 3685 | static int init_one(struct pci_dev *dev, |
705b6c7b PF |
3686 | const struct pci_device_id *ent) |
3687 | { | |
3688 | if (pci_enable_device(dev)) { | |
3689 | printk("error enabling pci device %p\n", dev); | |
3690 | return -EIO; | |
3691 | } | |
3692 | pci_set_master(dev); | |
3693 | device_init(slgt_device_count, dev); | |
3694 | return 0; | |
3695 | } | |
3696 | ||
ae8d8a14 | 3697 | static void remove_one(struct pci_dev *dev) |
705b6c7b PF |
3698 | { |
3699 | } | |
3700 | ||
b68e31d0 | 3701 | static const struct tty_operations ops = { |
705b6c7b PF |
3702 | .open = open, |
3703 | .close = close, | |
3704 | .write = write, | |
3705 | .put_char = put_char, | |
3706 | .flush_chars = flush_chars, | |
3707 | .write_room = write_room, | |
3708 | .chars_in_buffer = chars_in_buffer, | |
3709 | .flush_buffer = flush_buffer, | |
3710 | .ioctl = ioctl, | |
2acdb169 | 3711 | .compat_ioctl = slgt_compat_ioctl, |
705b6c7b PF |
3712 | .throttle = throttle, |
3713 | .unthrottle = unthrottle, | |
3714 | .send_xchar = send_xchar, | |
3715 | .break_ctl = set_break, | |
3716 | .wait_until_sent = wait_until_sent, | |
705b6c7b PF |
3717 | .set_termios = set_termios, |
3718 | .stop = tx_hold, | |
3719 | .start = tx_release, | |
3720 | .hangup = hangup, | |
3721 | .tiocmget = tiocmget, | |
3722 | .tiocmset = tiocmset, | |
0587102c | 3723 | .get_icount = get_icount, |
a18c56e5 | 3724 | .proc_fops = &synclink_gt_proc_fops, |
705b6c7b PF |
3725 | }; |
3726 | ||
3727 | static void slgt_cleanup(void) | |
3728 | { | |
3729 | int rc; | |
3730 | struct slgt_info *info; | |
3731 | struct slgt_info *tmp; | |
3732 | ||
a6b2f87b | 3733 | printk(KERN_INFO "unload %s\n", driver_name); |
705b6c7b PF |
3734 | |
3735 | if (serial_driver) { | |
62eb5b1f PF |
3736 | for (info=slgt_device_list ; info != NULL ; info=info->next_device) |
3737 | tty_unregister_device(serial_driver, info->line); | |
3236133e GKH |
3738 | rc = tty_unregister_driver(serial_driver); |
3739 | if (rc) | |
705b6c7b PF |
3740 | DBGERR(("tty_unregister_driver error=%d\n", rc)); |
3741 | put_tty_driver(serial_driver); | |
3742 | } | |
3743 | ||
3744 | /* reset devices */ | |
3745 | info = slgt_device_list; | |
3746 | while(info) { | |
3747 | reset_port(info); | |
3748 | info = info->next_device; | |
3749 | } | |
3750 | ||
3751 | /* release devices */ | |
3752 | info = slgt_device_list; | |
3753 | while(info) { | |
af69c7f9 | 3754 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
3755 | hdlcdev_exit(info); |
3756 | #endif | |
3757 | free_dma_bufs(info); | |
3758 | free_tmp_rbuf(info); | |
3759 | if (info->port_num == 0) | |
3760 | release_resources(info); | |
3761 | tmp = info; | |
3762 | info = info->next_device; | |
191c5f10 | 3763 | tty_port_destroy(&tmp->port); |
705b6c7b PF |
3764 | kfree(tmp); |
3765 | } | |
3766 | ||
3767 | if (pci_registered) | |
3768 | pci_unregister_driver(&pci_driver); | |
3769 | } | |
3770 | ||
3771 | /* | |
3772 | * Driver initialization entry point. | |
3773 | */ | |
3774 | static int __init slgt_init(void) | |
3775 | { | |
3776 | int rc; | |
3777 | ||
a6b2f87b | 3778 | printk(KERN_INFO "%s\n", driver_name); |
705b6c7b | 3779 | |
705b6c7b PF |
3780 | serial_driver = alloc_tty_driver(MAX_DEVICES); |
3781 | if (!serial_driver) { | |
62eb5b1f PF |
3782 | printk("%s can't allocate tty driver\n", driver_name); |
3783 | return -ENOMEM; | |
705b6c7b PF |
3784 | } |
3785 | ||
3786 | /* Initialize the tty_driver structure */ | |
3787 | ||
076fe303 | 3788 | serial_driver->driver_name = slgt_driver_name; |
705b6c7b PF |
3789 | serial_driver->name = tty_dev_prefix; |
3790 | serial_driver->major = ttymajor; | |
3791 | serial_driver->minor_start = 64; | |
3792 | serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
3793 | serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
3794 | serial_driver->init_termios = tty_std_termios; | |
3795 | serial_driver->init_termios.c_cflag = | |
3796 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
606d099c AC |
3797 | serial_driver->init_termios.c_ispeed = 9600; |
3798 | serial_driver->init_termios.c_ospeed = 9600; | |
62eb5b1f | 3799 | serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
705b6c7b PF |
3800 | tty_set_operations(serial_driver, &ops); |
3801 | if ((rc = tty_register_driver(serial_driver)) < 0) { | |
3802 | DBGERR(("%s can't register serial driver\n", driver_name)); | |
3803 | put_tty_driver(serial_driver); | |
3804 | serial_driver = NULL; | |
3805 | goto error; | |
3806 | } | |
3807 | ||
a6b2f87b PF |
3808 | printk(KERN_INFO "%s, tty major#%d\n", |
3809 | driver_name, serial_driver->major); | |
705b6c7b | 3810 | |
62eb5b1f PF |
3811 | slgt_device_count = 0; |
3812 | if ((rc = pci_register_driver(&pci_driver)) < 0) { | |
3813 | printk("%s pci_register_driver error=%d\n", driver_name, rc); | |
3814 | goto error; | |
3815 | } | |
0fab6de0 | 3816 | pci_registered = true; |
62eb5b1f PF |
3817 | |
3818 | if (!slgt_device_list) | |
3819 | printk("%s no devices found\n",driver_name); | |
3820 | ||
705b6c7b PF |
3821 | return 0; |
3822 | ||
3823 | error: | |
3824 | slgt_cleanup(); | |
3825 | return rc; | |
3826 | } | |
3827 | ||
3828 | static void __exit slgt_exit(void) | |
3829 | { | |
3830 | slgt_cleanup(); | |
3831 | } | |
3832 | ||
3833 | module_init(slgt_init); | |
3834 | module_exit(slgt_exit); | |
3835 | ||
3836 | /* | |
3837 | * register access routines | |
3838 | */ | |
3839 | ||
3840 | #define CALC_REGADDR() \ | |
3841 | unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ | |
3842 | if (addr >= 0x80) \ | |
9807224f PF |
3843 | reg_addr += (info->port_num) * 32; \ |
3844 | else if (addr >= 0x40) \ | |
3845 | reg_addr += (info->port_num) * 16; | |
705b6c7b PF |
3846 | |
3847 | static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) | |
3848 | { | |
3849 | CALC_REGADDR(); | |
3850 | return readb((void __iomem *)reg_addr); | |
3851 | } | |
3852 | ||
3853 | static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) | |
3854 | { | |
3855 | CALC_REGADDR(); | |
3856 | writeb(value, (void __iomem *)reg_addr); | |
3857 | } | |
3858 | ||
3859 | static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) | |
3860 | { | |
3861 | CALC_REGADDR(); | |
3862 | return readw((void __iomem *)reg_addr); | |
3863 | } | |
3864 | ||
3865 | static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) | |
3866 | { | |
3867 | CALC_REGADDR(); | |
3868 | writew(value, (void __iomem *)reg_addr); | |
3869 | } | |
3870 | ||
3871 | static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) | |
3872 | { | |
3873 | CALC_REGADDR(); | |
3874 | return readl((void __iomem *)reg_addr); | |
3875 | } | |
3876 | ||
3877 | static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) | |
3878 | { | |
3879 | CALC_REGADDR(); | |
3880 | writel(value, (void __iomem *)reg_addr); | |
3881 | } | |
3882 | ||
3883 | static void rdma_reset(struct slgt_info *info) | |
3884 | { | |
3885 | unsigned int i; | |
3886 | ||
3887 | /* set reset bit */ | |
3888 | wr_reg32(info, RDCSR, BIT1); | |
3889 | ||
3890 | /* wait for enable bit cleared */ | |
3891 | for(i=0 ; i < 1000 ; i++) | |
3892 | if (!(rd_reg32(info, RDCSR) & BIT0)) | |
3893 | break; | |
3894 | } | |
3895 | ||
3896 | static void tdma_reset(struct slgt_info *info) | |
3897 | { | |
3898 | unsigned int i; | |
3899 | ||
3900 | /* set reset bit */ | |
3901 | wr_reg32(info, TDCSR, BIT1); | |
3902 | ||
3903 | /* wait for enable bit cleared */ | |
3904 | for(i=0 ; i < 1000 ; i++) | |
3905 | if (!(rd_reg32(info, TDCSR) & BIT0)) | |
3906 | break; | |
3907 | } | |
3908 | ||
3909 | /* | |
3910 | * enable internal loopback | |
3911 | * TxCLK and RxCLK are generated from BRG | |
3912 | * and TxD is looped back to RxD internally. | |
3913 | */ | |
3914 | static void enable_loopback(struct slgt_info *info) | |
3915 | { | |
5980c001 | 3916 | /* SCR (serial control) BIT2=loopback enable */ |
705b6c7b PF |
3917 | wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); |
3918 | ||
3919 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
3920 | /* CCR (clock control) | |
3921 | * 07..05 tx clock source (010 = BRG) | |
3922 | * 04..02 rx clock source (010 = BRG) | |
3923 | * 01 auxclk enable (0 = disable) | |
3924 | * 00 BRG enable (1 = enable) | |
3925 | * | |
3926 | * 0100 1001 | |
3927 | */ | |
3928 | wr_reg8(info, CCR, 0x49); | |
3929 | ||
3930 | /* set speed if available, otherwise use default */ | |
3931 | if (info->params.clock_speed) | |
3932 | set_rate(info, info->params.clock_speed); | |
3933 | else | |
3934 | set_rate(info, 3686400); | |
3935 | } | |
3936 | } | |
3937 | ||
3938 | /* | |
3939 | * set baud rate generator to specified rate | |
3940 | */ | |
3941 | static void set_rate(struct slgt_info *info, u32 rate) | |
3942 | { | |
3943 | unsigned int div; | |
1f80769f | 3944 | unsigned int osc = info->base_clock; |
705b6c7b PF |
3945 | |
3946 | /* div = osc/rate - 1 | |
3947 | * | |
3948 | * Round div up if osc/rate is not integer to | |
3949 | * force to next slowest rate. | |
3950 | */ | |
3951 | ||
3952 | if (rate) { | |
3953 | div = osc/rate; | |
3954 | if (!(osc % rate) && div) | |
3955 | div--; | |
3956 | wr_reg16(info, BDR, (unsigned short)div); | |
3957 | } | |
3958 | } | |
3959 | ||
3960 | static void rx_stop(struct slgt_info *info) | |
3961 | { | |
3962 | unsigned short val; | |
3963 | ||
3964 | /* disable and reset receiver */ | |
3965 | val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ | |
3966 | wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ | |
3967 | wr_reg16(info, RCR, val); /* clear reset bit */ | |
3968 | ||
3969 | slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); | |
3970 | ||
3971 | /* clear pending rx interrupts */ | |
3972 | wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); | |
3973 | ||
3974 | rdma_reset(info); | |
3975 | ||
0fab6de0 JP |
3976 | info->rx_enabled = false; |
3977 | info->rx_restart = false; | |
705b6c7b PF |
3978 | } |
3979 | ||
3980 | static void rx_start(struct slgt_info *info) | |
3981 | { | |
3982 | unsigned short val; | |
3983 | ||
3984 | slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); | |
3985 | ||
3986 | /* clear pending rx overrun IRQ */ | |
3987 | wr_reg16(info, SSR, IRQ_RXOVER); | |
3988 | ||
3989 | /* reset and disable receiver */ | |
3990 | val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ | |
3991 | wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ | |
3992 | wr_reg16(info, RCR, val); /* clear reset bit */ | |
3993 | ||
3994 | rdma_reset(info); | |
3995 | reset_rbufs(info); | |
3996 | ||
5ba5a5d2 PF |
3997 | if (info->rx_pio) { |
3998 | /* rx request when rx FIFO not empty */ | |
3999 | wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); | |
4000 | slgt_irq_on(info, IRQ_RXDATA); | |
4001 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
4002 | /* enable saving of rx status */ | |
4003 | wr_reg32(info, RDCSR, BIT6); | |
4004 | } | |
705b6c7b | 4005 | } else { |
5ba5a5d2 PF |
4006 | /* rx request when rx FIFO half full */ |
4007 | wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); | |
4008 | /* set 1st descriptor address */ | |
4009 | wr_reg32(info, RDDAR, info->rbufs[0].pdesc); | |
4010 | ||
4011 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
4012 | /* enable rx DMA and DMA interrupt */ | |
4013 | wr_reg32(info, RDCSR, (BIT2 + BIT0)); | |
4014 | } else { | |
4015 | /* enable saving of rx status, rx DMA and DMA interrupt */ | |
4016 | wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); | |
4017 | } | |
705b6c7b PF |
4018 | } |
4019 | ||
4020 | slgt_irq_on(info, IRQ_RXOVER); | |
4021 | ||
4022 | /* enable receiver */ | |
4023 | wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); | |
4024 | ||
0fab6de0 JP |
4025 | info->rx_restart = false; |
4026 | info->rx_enabled = true; | |
705b6c7b PF |
4027 | } |
4028 | ||
4029 | static void tx_start(struct slgt_info *info) | |
4030 | { | |
4031 | if (!info->tx_enabled) { | |
4032 | wr_reg16(info, TCR, | |
cb10dc9a | 4033 | (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); |
0fab6de0 | 4034 | info->tx_enabled = true; |
705b6c7b PF |
4035 | } |
4036 | ||
de538eb3 | 4037 | if (desc_count(info->tbufs[info->tbuf_start])) { |
0fab6de0 | 4038 | info->drop_rts_on_tx_done = false; |
705b6c7b PF |
4039 | |
4040 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
4041 | if (info->params.flags & HDLC_FLAG_AUTO_RTS) { | |
4042 | get_signals(info); | |
4043 | if (!(info->signals & SerialSignal_RTS)) { | |
4044 | info->signals |= SerialSignal_RTS; | |
4045 | set_signals(info); | |
0fab6de0 | 4046 | info->drop_rts_on_tx_done = true; |
705b6c7b PF |
4047 | } |
4048 | } | |
4049 | ||
4050 | slgt_irq_off(info, IRQ_TXDATA); | |
4051 | slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); | |
4052 | /* clear tx idle and underrun status bits */ | |
4053 | wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); | |
705b6c7b | 4054 | } else { |
705b6c7b PF |
4055 | slgt_irq_off(info, IRQ_TXDATA); |
4056 | slgt_irq_on(info, IRQ_TXIDLE); | |
4057 | /* clear tx idle status bit */ | |
4058 | wr_reg16(info, SSR, IRQ_TXIDLE); | |
705b6c7b | 4059 | } |
ce89294c PF |
4060 | /* set 1st descriptor address and start DMA */ |
4061 | wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); | |
4062 | wr_reg32(info, TDCSR, BIT2 + BIT0); | |
0fab6de0 | 4063 | info->tx_active = true; |
705b6c7b PF |
4064 | } |
4065 | } | |
4066 | ||
4067 | static void tx_stop(struct slgt_info *info) | |
4068 | { | |
4069 | unsigned short val; | |
4070 | ||
4071 | del_timer(&info->tx_timer); | |
4072 | ||
4073 | tdma_reset(info); | |
4074 | ||
4075 | /* reset and disable transmitter */ | |
4076 | val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ | |
4077 | wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ | |
705b6c7b PF |
4078 | |
4079 | slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); | |
4080 | ||
4081 | /* clear tx idle and underrun status bit */ | |
4082 | wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); | |
4083 | ||
4084 | reset_tbufs(info); | |
4085 | ||
0fab6de0 JP |
4086 | info->tx_enabled = false; |
4087 | info->tx_active = false; | |
705b6c7b PF |
4088 | } |
4089 | ||
4090 | static void reset_port(struct slgt_info *info) | |
4091 | { | |
4092 | if (!info->reg_addr) | |
4093 | return; | |
4094 | ||
4095 | tx_stop(info); | |
4096 | rx_stop(info); | |
4097 | ||
9fe8074b | 4098 | info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); |
705b6c7b PF |
4099 | set_signals(info); |
4100 | ||
4101 | slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); | |
4102 | } | |
4103 | ||
4104 | static void reset_adapter(struct slgt_info *info) | |
4105 | { | |
4106 | int i; | |
4107 | for (i=0; i < info->port_count; ++i) { | |
4108 | if (info->port_array[i]) | |
4109 | reset_port(info->port_array[i]); | |
4110 | } | |
4111 | } | |
4112 | ||
4113 | static void async_mode(struct slgt_info *info) | |
4114 | { | |
4115 | unsigned short val; | |
4116 | ||
4117 | slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); | |
4118 | tx_stop(info); | |
4119 | rx_stop(info); | |
4120 | ||
4121 | /* TCR (tx control) | |
4122 | * | |
4123 | * 15..13 mode, 010=async | |
4124 | * 12..10 encoding, 000=NRZ | |
4125 | * 09 parity enable | |
4126 | * 08 1=odd parity, 0=even parity | |
4127 | * 07 1=RTS driver control | |
4128 | * 06 1=break enable | |
4129 | * 05..04 character length | |
4130 | * 00=5 bits | |
4131 | * 01=6 bits | |
4132 | * 10=7 bits | |
4133 | * 11=8 bits | |
4134 | * 03 0=1 stop bit, 1=2 stop bits | |
4135 | * 02 reset | |
4136 | * 01 enable | |
4137 | * 00 auto-CTS enable | |
4138 | */ | |
4139 | val = 0x4000; | |
4140 | ||
4141 | if (info->if_mode & MGSL_INTERFACE_RTS_EN) | |
4142 | val |= BIT7; | |
4143 | ||
4144 | if (info->params.parity != ASYNC_PARITY_NONE) { | |
4145 | val |= BIT9; | |
4146 | if (info->params.parity == ASYNC_PARITY_ODD) | |
4147 | val |= BIT8; | |
4148 | } | |
4149 | ||
4150 | switch (info->params.data_bits) | |
4151 | { | |
4152 | case 6: val |= BIT4; break; | |
4153 | case 7: val |= BIT5; break; | |
4154 | case 8: val |= BIT5 + BIT4; break; | |
4155 | } | |
4156 | ||
4157 | if (info->params.stop_bits != 1) | |
4158 | val |= BIT3; | |
4159 | ||
4160 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) | |
4161 | val |= BIT0; | |
4162 | ||
4163 | wr_reg16(info, TCR, val); | |
4164 | ||
4165 | /* RCR (rx control) | |
4166 | * | |
4167 | * 15..13 mode, 010=async | |
4168 | * 12..10 encoding, 000=NRZ | |
4169 | * 09 parity enable | |
4170 | * 08 1=odd parity, 0=even parity | |
4171 | * 07..06 reserved, must be 0 | |
4172 | * 05..04 character length | |
4173 | * 00=5 bits | |
4174 | * 01=6 bits | |
4175 | * 10=7 bits | |
4176 | * 11=8 bits | |
4177 | * 03 reserved, must be zero | |
4178 | * 02 reset | |
4179 | * 01 enable | |
4180 | * 00 auto-DCD enable | |
4181 | */ | |
4182 | val = 0x4000; | |
4183 | ||
4184 | if (info->params.parity != ASYNC_PARITY_NONE) { | |
4185 | val |= BIT9; | |
4186 | if (info->params.parity == ASYNC_PARITY_ODD) | |
4187 | val |= BIT8; | |
4188 | } | |
4189 | ||
4190 | switch (info->params.data_bits) | |
4191 | { | |
4192 | case 6: val |= BIT4; break; | |
4193 | case 7: val |= BIT5; break; | |
4194 | case 8: val |= BIT5 + BIT4; break; | |
4195 | } | |
4196 | ||
4197 | if (info->params.flags & HDLC_FLAG_AUTO_DCD) | |
4198 | val |= BIT0; | |
4199 | ||
4200 | wr_reg16(info, RCR, val); | |
4201 | ||
4202 | /* CCR (clock control) | |
4203 | * | |
4204 | * 07..05 011 = tx clock source is BRG/16 | |
4205 | * 04..02 010 = rx clock source is BRG | |
4206 | * 01 0 = auxclk disabled | |
4207 | * 00 1 = BRG enabled | |
4208 | * | |
4209 | * 0110 1001 | |
4210 | */ | |
4211 | wr_reg8(info, CCR, 0x69); | |
4212 | ||
4213 | msc_set_vcr(info); | |
4214 | ||
705b6c7b PF |
4215 | /* SCR (serial control) |
4216 | * | |
4217 | * 15 1=tx req on FIFO half empty | |
4218 | * 14 1=rx req on FIFO half full | |
4219 | * 13 tx data IRQ enable | |
4220 | * 12 tx idle IRQ enable | |
4221 | * 11 rx break on IRQ enable | |
4222 | * 10 rx data IRQ enable | |
4223 | * 09 rx break off IRQ enable | |
4224 | * 08 overrun IRQ enable | |
4225 | * 07 DSR IRQ enable | |
4226 | * 06 CTS IRQ enable | |
4227 | * 05 DCD IRQ enable | |
4228 | * 04 RI IRQ enable | |
1f80769f | 4229 | * 03 0=16x sampling, 1=8x sampling |
705b6c7b PF |
4230 | * 02 1=txd->rxd internal loopback enable |
4231 | * 01 reserved, must be zero | |
4232 | * 00 1=master IRQ enable | |
4233 | */ | |
4234 | val = BIT15 + BIT14 + BIT0; | |
1f80769f PF |
4235 | /* JCR[8] : 1 = x8 async mode feature available */ |
4236 | if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && | |
4237 | ((info->base_clock < (info->params.data_rate * 16)) || | |
4238 | (info->base_clock % (info->params.data_rate * 16)))) { | |
4239 | /* use 8x sampling */ | |
4240 | val |= BIT3; | |
4241 | set_rate(info, info->params.data_rate * 8); | |
4242 | } else { | |
4243 | /* use 16x sampling */ | |
4244 | set_rate(info, info->params.data_rate * 16); | |
4245 | } | |
705b6c7b PF |
4246 | wr_reg16(info, SCR, val); |
4247 | ||
4248 | slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); | |
4249 | ||
705b6c7b PF |
4250 | if (info->params.loopback) |
4251 | enable_loopback(info); | |
4252 | } | |
4253 | ||
cb10dc9a | 4254 | static void sync_mode(struct slgt_info *info) |
705b6c7b PF |
4255 | { |
4256 | unsigned short val; | |
4257 | ||
4258 | slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); | |
4259 | tx_stop(info); | |
4260 | rx_stop(info); | |
4261 | ||
4262 | /* TCR (tx control) | |
4263 | * | |
9807224f PF |
4264 | * 15..13 mode |
4265 | * 000=HDLC/SDLC | |
4266 | * 001=raw bit synchronous | |
4267 | * 010=asynchronous/isochronous | |
4268 | * 011=monosync byte synchronous | |
4269 | * 100=bisync byte synchronous | |
4270 | * 101=xsync byte synchronous | |
705b6c7b PF |
4271 | * 12..10 encoding |
4272 | * 09 CRC enable | |
4273 | * 08 CRC32 | |
4274 | * 07 1=RTS driver control | |
4275 | * 06 preamble enable | |
4276 | * 05..04 preamble length | |
4277 | * 03 share open/close flag | |
4278 | * 02 reset | |
4279 | * 01 enable | |
4280 | * 00 auto-CTS enable | |
4281 | */ | |
993456cd | 4282 | val = BIT2; |
705b6c7b | 4283 | |
cb10dc9a | 4284 | switch(info->params.mode) { |
9807224f PF |
4285 | case MGSL_MODE_XSYNC: |
4286 | val |= BIT15 + BIT13; | |
4287 | break; | |
cb10dc9a PF |
4288 | case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; |
4289 | case MGSL_MODE_BISYNC: val |= BIT15; break; | |
4290 | case MGSL_MODE_RAW: val |= BIT13; break; | |
4291 | } | |
705b6c7b PF |
4292 | if (info->if_mode & MGSL_INTERFACE_RTS_EN) |
4293 | val |= BIT7; | |
4294 | ||
4295 | switch(info->params.encoding) | |
4296 | { | |
4297 | case HDLC_ENCODING_NRZB: val |= BIT10; break; | |
4298 | case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; | |
4299 | case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; | |
4300 | case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; | |
4301 | case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; | |
4302 | case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; | |
4303 | case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; | |
4304 | } | |
4305 | ||
04b374d0 | 4306 | switch (info->params.crc_type & HDLC_CRC_MASK) |
705b6c7b PF |
4307 | { |
4308 | case HDLC_CRC_16_CCITT: val |= BIT9; break; | |
4309 | case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; | |
4310 | } | |
4311 | ||
4312 | if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) | |
4313 | val |= BIT6; | |
4314 | ||
4315 | switch (info->params.preamble_length) | |
4316 | { | |
4317 | case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; | |
4318 | case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; | |
4319 | case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; | |
4320 | } | |
4321 | ||
4322 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) | |
4323 | val |= BIT0; | |
4324 | ||
4325 | wr_reg16(info, TCR, val); | |
4326 | ||
4327 | /* TPR (transmit preamble) */ | |
4328 | ||
4329 | switch (info->params.preamble) | |
4330 | { | |
4331 | case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; | |
4332 | case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; | |
4333 | case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; | |
4334 | case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; | |
4335 | case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; | |
4336 | default: val = 0x7e; break; | |
4337 | } | |
4338 | wr_reg8(info, TPR, (unsigned char)val); | |
4339 | ||
4340 | /* RCR (rx control) | |
4341 | * | |
9807224f PF |
4342 | * 15..13 mode |
4343 | * 000=HDLC/SDLC | |
4344 | * 001=raw bit synchronous | |
4345 | * 010=asynchronous/isochronous | |
4346 | * 011=monosync byte synchronous | |
4347 | * 100=bisync byte synchronous | |
4348 | * 101=xsync byte synchronous | |
705b6c7b PF |
4349 | * 12..10 encoding |
4350 | * 09 CRC enable | |
4351 | * 08 CRC32 | |
4352 | * 07..03 reserved, must be 0 | |
4353 | * 02 reset | |
4354 | * 01 enable | |
4355 | * 00 auto-DCD enable | |
4356 | */ | |
4357 | val = 0; | |
4358 | ||
cb10dc9a | 4359 | switch(info->params.mode) { |
9807224f PF |
4360 | case MGSL_MODE_XSYNC: |
4361 | val |= BIT15 + BIT13; | |
4362 | break; | |
cb10dc9a PF |
4363 | case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; |
4364 | case MGSL_MODE_BISYNC: val |= BIT15; break; | |
4365 | case MGSL_MODE_RAW: val |= BIT13; break; | |
4366 | } | |
705b6c7b PF |
4367 | |
4368 | switch(info->params.encoding) | |
4369 | { | |
4370 | case HDLC_ENCODING_NRZB: val |= BIT10; break; | |
4371 | case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; | |
4372 | case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; | |
4373 | case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; | |
4374 | case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; | |
4375 | case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; | |
4376 | case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; | |
4377 | } | |
4378 | ||
04b374d0 | 4379 | switch (info->params.crc_type & HDLC_CRC_MASK) |
705b6c7b PF |
4380 | { |
4381 | case HDLC_CRC_16_CCITT: val |= BIT9; break; | |
4382 | case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; | |
4383 | } | |
4384 | ||
4385 | if (info->params.flags & HDLC_FLAG_AUTO_DCD) | |
4386 | val |= BIT0; | |
4387 | ||
4388 | wr_reg16(info, RCR, val); | |
4389 | ||
4390 | /* CCR (clock control) | |
4391 | * | |
4392 | * 07..05 tx clock source | |
4393 | * 04..02 rx clock source | |
4394 | * 01 auxclk enable | |
4395 | * 00 BRG enable | |
4396 | */ | |
4397 | val = 0; | |
4398 | ||
4399 | if (info->params.flags & HDLC_FLAG_TXC_BRG) | |
4400 | { | |
4401 | // when RxC source is DPLL, BRG generates 16X DPLL | |
4402 | // reference clock, so take TxC from BRG/16 to get | |
4403 | // transmit clock at actual data rate | |
4404 | if (info->params.flags & HDLC_FLAG_RXC_DPLL) | |
4405 | val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ | |
4406 | else | |
4407 | val |= BIT6; /* 010, txclk = BRG */ | |
4408 | } | |
4409 | else if (info->params.flags & HDLC_FLAG_TXC_DPLL) | |
4410 | val |= BIT7; /* 100, txclk = DPLL Input */ | |
4411 | else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) | |
4412 | val |= BIT5; /* 001, txclk = RXC Input */ | |
4413 | ||
4414 | if (info->params.flags & HDLC_FLAG_RXC_BRG) | |
4415 | val |= BIT3; /* 010, rxclk = BRG */ | |
4416 | else if (info->params.flags & HDLC_FLAG_RXC_DPLL) | |
4417 | val |= BIT4; /* 100, rxclk = DPLL */ | |
4418 | else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) | |
4419 | val |= BIT2; /* 001, rxclk = TXC Input */ | |
4420 | ||
4421 | if (info->params.clock_speed) | |
4422 | val |= BIT1 + BIT0; | |
4423 | ||
4424 | wr_reg8(info, CCR, (unsigned char)val); | |
4425 | ||
4426 | if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) | |
4427 | { | |
4428 | // program DPLL mode | |
4429 | switch(info->params.encoding) | |
4430 | { | |
4431 | case HDLC_ENCODING_BIPHASE_MARK: | |
4432 | case HDLC_ENCODING_BIPHASE_SPACE: | |
4433 | val = BIT7; break; | |
4434 | case HDLC_ENCODING_BIPHASE_LEVEL: | |
4435 | case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: | |
4436 | val = BIT7 + BIT6; break; | |
4437 | default: val = BIT6; // NRZ encodings | |
4438 | } | |
4439 | wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); | |
4440 | ||
4441 | // DPLL requires a 16X reference clock from BRG | |
4442 | set_rate(info, info->params.clock_speed * 16); | |
4443 | } | |
4444 | else | |
4445 | set_rate(info, info->params.clock_speed); | |
4446 | ||
4447 | tx_set_idle(info); | |
4448 | ||
4449 | msc_set_vcr(info); | |
4450 | ||
4451 | /* SCR (serial control) | |
4452 | * | |
4453 | * 15 1=tx req on FIFO half empty | |
4454 | * 14 1=rx req on FIFO half full | |
4455 | * 13 tx data IRQ enable | |
4456 | * 12 tx idle IRQ enable | |
4457 | * 11 underrun IRQ enable | |
4458 | * 10 rx data IRQ enable | |
4459 | * 09 rx idle IRQ enable | |
4460 | * 08 overrun IRQ enable | |
4461 | * 07 DSR IRQ enable | |
4462 | * 06 CTS IRQ enable | |
4463 | * 05 DCD IRQ enable | |
4464 | * 04 RI IRQ enable | |
4465 | * 03 reserved, must be zero | |
4466 | * 02 1=txd->rxd internal loopback enable | |
4467 | * 01 reserved, must be zero | |
4468 | * 00 1=master IRQ enable | |
4469 | */ | |
4470 | wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); | |
4471 | ||
4472 | if (info->params.loopback) | |
4473 | enable_loopback(info); | |
4474 | } | |
4475 | ||
4476 | /* | |
4477 | * set transmit idle mode | |
4478 | */ | |
4479 | static void tx_set_idle(struct slgt_info *info) | |
4480 | { | |
643f3319 PF |
4481 | unsigned char val; |
4482 | unsigned short tcr; | |
705b6c7b | 4483 | |
643f3319 PF |
4484 | /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits |
4485 | * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits | |
4486 | */ | |
4487 | tcr = rd_reg16(info, TCR); | |
4488 | if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { | |
4489 | /* disable preamble, set idle size to 16 bits */ | |
4490 | tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; | |
4491 | /* MSB of 16 bit idle specified in tx preamble register (TPR) */ | |
4492 | wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); | |
4493 | } else if (!(tcr & BIT6)) { | |
4494 | /* preamble is disabled, set idle size to 8 bits */ | |
4495 | tcr &= ~(BIT5 + BIT4); | |
4496 | } | |
4497 | wr_reg16(info, TCR, tcr); | |
4498 | ||
4499 | if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { | |
4500 | /* LSB of custom tx idle specified in tx idle register */ | |
4501 | val = (unsigned char)(info->idle_mode & 0xff); | |
4502 | } else { | |
4503 | /* standard 8 bit idle patterns */ | |
4504 | switch(info->idle_mode) | |
4505 | { | |
4506 | case HDLC_TXIDLE_FLAGS: val = 0x7e; break; | |
4507 | case HDLC_TXIDLE_ALT_ZEROS_ONES: | |
4508 | case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; | |
4509 | case HDLC_TXIDLE_ZEROS: | |
4510 | case HDLC_TXIDLE_SPACE: val = 0x00; break; | |
4511 | default: val = 0xff; | |
4512 | } | |
705b6c7b PF |
4513 | } |
4514 | ||
4515 | wr_reg8(info, TIR, val); | |
4516 | } | |
4517 | ||
4518 | /* | |
4519 | * get state of V24 status (input) signals | |
4520 | */ | |
4521 | static void get_signals(struct slgt_info *info) | |
4522 | { | |
4523 | unsigned short status = rd_reg16(info, SSR); | |
4524 | ||
9fe8074b JP |
4525 | /* clear all serial signals except RTS and DTR */ |
4526 | info->signals &= SerialSignal_RTS | SerialSignal_DTR; | |
705b6c7b PF |
4527 | |
4528 | if (status & BIT3) | |
4529 | info->signals |= SerialSignal_DSR; | |
4530 | if (status & BIT2) | |
4531 | info->signals |= SerialSignal_CTS; | |
4532 | if (status & BIT1) | |
4533 | info->signals |= SerialSignal_DCD; | |
4534 | if (status & BIT0) | |
4535 | info->signals |= SerialSignal_RI; | |
4536 | } | |
4537 | ||
4538 | /* | |
4539 | * set V.24 Control Register based on current configuration | |
4540 | */ | |
4541 | static void msc_set_vcr(struct slgt_info *info) | |
4542 | { | |
4543 | unsigned char val = 0; | |
4544 | ||
4545 | /* VCR (V.24 control) | |
4546 | * | |
4547 | * 07..04 serial IF select | |
4548 | * 03 DTR | |
4549 | * 02 RTS | |
4550 | * 01 LL | |
4551 | * 00 RL | |
4552 | */ | |
4553 | ||
4554 | switch(info->if_mode & MGSL_INTERFACE_MASK) | |
4555 | { | |
4556 | case MGSL_INTERFACE_RS232: | |
4557 | val |= BIT5; /* 0010 */ | |
4558 | break; | |
4559 | case MGSL_INTERFACE_V35: | |
4560 | val |= BIT7 + BIT6 + BIT5; /* 1110 */ | |
4561 | break; | |
4562 | case MGSL_INTERFACE_RS422: | |
4563 | val |= BIT6; /* 0100 */ | |
4564 | break; | |
4565 | } | |
4566 | ||
e5590717 PF |
4567 | if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) |
4568 | val |= BIT4; | |
705b6c7b PF |
4569 | if (info->signals & SerialSignal_DTR) |
4570 | val |= BIT3; | |
4571 | if (info->signals & SerialSignal_RTS) | |
4572 | val |= BIT2; | |
4573 | if (info->if_mode & MGSL_INTERFACE_LL) | |
4574 | val |= BIT1; | |
4575 | if (info->if_mode & MGSL_INTERFACE_RL) | |
4576 | val |= BIT0; | |
4577 | wr_reg8(info, VCR, val); | |
4578 | } | |
4579 | ||
4580 | /* | |
4581 | * set state of V24 control (output) signals | |
4582 | */ | |
4583 | static void set_signals(struct slgt_info *info) | |
4584 | { | |
4585 | unsigned char val = rd_reg8(info, VCR); | |
4586 | if (info->signals & SerialSignal_DTR) | |
4587 | val |= BIT3; | |
4588 | else | |
4589 | val &= ~BIT3; | |
4590 | if (info->signals & SerialSignal_RTS) | |
4591 | val |= BIT2; | |
4592 | else | |
4593 | val &= ~BIT2; | |
4594 | wr_reg8(info, VCR, val); | |
4595 | } | |
4596 | ||
4597 | /* | |
4598 | * free range of receive DMA buffers (i to last) | |
4599 | */ | |
4600 | static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) | |
4601 | { | |
4602 | int done = 0; | |
4603 | ||
4604 | while(!done) { | |
4605 | /* reset current buffer for reuse */ | |
4606 | info->rbufs[i].status = 0; | |
814dae03 | 4607 | set_desc_count(info->rbufs[i], info->rbuf_fill_level); |
705b6c7b PF |
4608 | if (i == last) |
4609 | done = 1; | |
4610 | if (++i == info->rbuf_count) | |
4611 | i = 0; | |
4612 | } | |
4613 | info->rbuf_current = i; | |
4614 | } | |
4615 | ||
4616 | /* | |
4617 | * mark all receive DMA buffers as free | |
4618 | */ | |
4619 | static void reset_rbufs(struct slgt_info *info) | |
4620 | { | |
4621 | free_rbufs(info, 0, info->rbuf_count - 1); | |
5ba5a5d2 PF |
4622 | info->rbuf_fill_index = 0; |
4623 | info->rbuf_fill_count = 0; | |
705b6c7b PF |
4624 | } |
4625 | ||
4626 | /* | |
4627 | * pass receive HDLC frame to upper layer | |
4628 | * | |
0fab6de0 | 4629 | * return true if frame available, otherwise false |
705b6c7b | 4630 | */ |
0fab6de0 | 4631 | static bool rx_get_frame(struct slgt_info *info) |
705b6c7b PF |
4632 | { |
4633 | unsigned int start, end; | |
4634 | unsigned short status; | |
4635 | unsigned int framesize = 0; | |
705b6c7b | 4636 | unsigned long flags; |
8fb06c77 | 4637 | struct tty_struct *tty = info->port.tty; |
705b6c7b | 4638 | unsigned char addr_field = 0xff; |
04b374d0 PF |
4639 | unsigned int crc_size = 0; |
4640 | ||
4641 | switch (info->params.crc_type & HDLC_CRC_MASK) { | |
4642 | case HDLC_CRC_16_CCITT: crc_size = 2; break; | |
4643 | case HDLC_CRC_32_CCITT: crc_size = 4; break; | |
4644 | } | |
705b6c7b PF |
4645 | |
4646 | check_again: | |
4647 | ||
4648 | framesize = 0; | |
4649 | addr_field = 0xff; | |
4650 | start = end = info->rbuf_current; | |
4651 | ||
4652 | for (;;) { | |
4653 | if (!desc_complete(info->rbufs[end])) | |
4654 | goto cleanup; | |
4655 | ||
4656 | if (framesize == 0 && info->params.addr_filter != 0xff) | |
4657 | addr_field = info->rbufs[end].buf[0]; | |
4658 | ||
4659 | framesize += desc_count(info->rbufs[end]); | |
4660 | ||
4661 | if (desc_eof(info->rbufs[end])) | |
4662 | break; | |
4663 | ||
4664 | if (++end == info->rbuf_count) | |
4665 | end = 0; | |
4666 | ||
4667 | if (end == info->rbuf_current) { | |
4668 | if (info->rx_enabled){ | |
4669 | spin_lock_irqsave(&info->lock,flags); | |
4670 | rx_start(info); | |
4671 | spin_unlock_irqrestore(&info->lock,flags); | |
4672 | } | |
4673 | goto cleanup; | |
4674 | } | |
4675 | } | |
4676 | ||
4677 | /* status | |
4678 | * | |
4679 | * 15 buffer complete | |
4680 | * 14..06 reserved | |
4681 | * 05..04 residue | |
4682 | * 02 eof (end of frame) | |
4683 | * 01 CRC error | |
4684 | * 00 abort | |
4685 | */ | |
4686 | status = desc_status(info->rbufs[end]); | |
4687 | ||
4688 | /* ignore CRC bit if not using CRC (bit is undefined) */ | |
04b374d0 | 4689 | if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) |
705b6c7b PF |
4690 | status &= ~BIT1; |
4691 | ||
4692 | if (framesize == 0 || | |
4693 | (addr_field != 0xff && addr_field != info->params.addr_filter)) { | |
4694 | free_rbufs(info, start, end); | |
4695 | goto check_again; | |
4696 | } | |
4697 | ||
04b374d0 PF |
4698 | if (framesize < (2 + crc_size) || status & BIT0) { |
4699 | info->icount.rxshort++; | |
705b6c7b | 4700 | framesize = 0; |
04b374d0 PF |
4701 | } else if (status & BIT1) { |
4702 | info->icount.rxcrc++; | |
4703 | if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) | |
4704 | framesize = 0; | |
4705 | } | |
705b6c7b | 4706 | |
af69c7f9 | 4707 | #if SYNCLINK_GENERIC_HDLC |
04b374d0 | 4708 | if (framesize == 0) { |
198191c4 KH |
4709 | info->netdev->stats.rx_errors++; |
4710 | info->netdev->stats.rx_frame_errors++; | |
705b6c7b | 4711 | } |
04b374d0 | 4712 | #endif |
705b6c7b PF |
4713 | |
4714 | DBGBH(("%s rx frame status=%04X size=%d\n", | |
4715 | info->device_name, status, framesize)); | |
814dae03 | 4716 | DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); |
705b6c7b PF |
4717 | |
4718 | if (framesize) { | |
04b374d0 PF |
4719 | if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { |
4720 | framesize -= crc_size; | |
4721 | crc_size = 0; | |
4722 | } | |
4723 | ||
4724 | if (framesize > info->max_frame_size + crc_size) | |
705b6c7b PF |
4725 | info->icount.rxlong++; |
4726 | else { | |
4727 | /* copy dma buffer(s) to contiguous temp buffer */ | |
4728 | int copy_count = framesize; | |
4729 | int i = start; | |
4730 | unsigned char *p = info->tmp_rbuf; | |
4731 | info->tmp_rbuf_count = framesize; | |
4732 | ||
4733 | info->icount.rxok++; | |
4734 | ||
4735 | while(copy_count) { | |
814dae03 | 4736 | int partial_count = min_t(int, copy_count, info->rbuf_fill_level); |
705b6c7b PF |
4737 | memcpy(p, info->rbufs[i].buf, partial_count); |
4738 | p += partial_count; | |
4739 | copy_count -= partial_count; | |
4740 | if (++i == info->rbuf_count) | |
4741 | i = 0; | |
4742 | } | |
4743 | ||
04b374d0 PF |
4744 | if (info->params.crc_type & HDLC_CRC_RETURN_EX) { |
4745 | *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; | |
4746 | framesize++; | |
4747 | } | |
4748 | ||
af69c7f9 | 4749 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
4750 | if (info->netcount) |
4751 | hdlcdev_rx(info,info->tmp_rbuf, framesize); | |
4752 | else | |
4753 | #endif | |
4754 | ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); | |
4755 | } | |
4756 | } | |
4757 | free_rbufs(info, start, end); | |
0fab6de0 | 4758 | return true; |
705b6c7b PF |
4759 | |
4760 | cleanup: | |
0fab6de0 | 4761 | return false; |
705b6c7b PF |
4762 | } |
4763 | ||
4764 | /* | |
4765 | * pass receive buffer (RAW synchronous mode) to tty layer | |
0fab6de0 | 4766 | * return true if buffer available, otherwise false |
705b6c7b | 4767 | */ |
0fab6de0 | 4768 | static bool rx_get_buf(struct slgt_info *info) |
705b6c7b PF |
4769 | { |
4770 | unsigned int i = info->rbuf_current; | |
cb10dc9a | 4771 | unsigned int count; |
705b6c7b PF |
4772 | |
4773 | if (!desc_complete(info->rbufs[i])) | |
0fab6de0 | 4774 | return false; |
cb10dc9a PF |
4775 | count = desc_count(info->rbufs[i]); |
4776 | switch(info->params.mode) { | |
4777 | case MGSL_MODE_MONOSYNC: | |
4778 | case MGSL_MODE_BISYNC: | |
9807224f | 4779 | case MGSL_MODE_XSYNC: |
cb10dc9a PF |
4780 | /* ignore residue in byte synchronous modes */ |
4781 | if (desc_residue(info->rbufs[i])) | |
4782 | count--; | |
4783 | break; | |
4784 | } | |
4785 | DBGDATA(info, info->rbufs[i].buf, count, "rx"); | |
4786 | DBGINFO(("rx_get_buf size=%d\n", count)); | |
4787 | if (count) | |
8fb06c77 | 4788 | ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, |
cb10dc9a | 4789 | info->flag_buf, count); |
705b6c7b | 4790 | free_rbufs(info, i, i); |
0fab6de0 | 4791 | return true; |
705b6c7b PF |
4792 | } |
4793 | ||
4794 | static void reset_tbufs(struct slgt_info *info) | |
4795 | { | |
4796 | unsigned int i; | |
4797 | info->tbuf_current = 0; | |
4798 | for (i=0 ; i < info->tbuf_count ; i++) { | |
4799 | info->tbufs[i].status = 0; | |
4800 | info->tbufs[i].count = 0; | |
4801 | } | |
4802 | } | |
4803 | ||
4804 | /* | |
4805 | * return number of free transmit DMA buffers | |
4806 | */ | |
4807 | static unsigned int free_tbuf_count(struct slgt_info *info) | |
4808 | { | |
4809 | unsigned int count = 0; | |
4810 | unsigned int i = info->tbuf_current; | |
4811 | ||
4812 | do | |
4813 | { | |
4814 | if (desc_count(info->tbufs[i])) | |
4815 | break; /* buffer in use */ | |
4816 | ++count; | |
4817 | if (++i == info->tbuf_count) | |
4818 | i=0; | |
4819 | } while (i != info->tbuf_current); | |
4820 | ||
bb029c67 PF |
4821 | /* if tx DMA active, last zero count buffer is in use */ |
4822 | if (count && (rd_reg32(info, TDCSR) & BIT0)) | |
705b6c7b PF |
4823 | --count; |
4824 | ||
4825 | return count; | |
4826 | } | |
4827 | ||
403214d0 PF |
4828 | /* |
4829 | * return number of bytes in unsent transmit DMA buffers | |
4830 | * and the serial controller tx FIFO | |
4831 | */ | |
4832 | static unsigned int tbuf_bytes(struct slgt_info *info) | |
4833 | { | |
4834 | unsigned int total_count = 0; | |
4835 | unsigned int i = info->tbuf_current; | |
4836 | unsigned int reg_value; | |
4837 | unsigned int count; | |
4838 | unsigned int active_buf_count = 0; | |
4839 | ||
4840 | /* | |
4841 | * Add descriptor counts for all tx DMA buffers. | |
4842 | * If count is zero (cleared by DMA controller after read), | |
4843 | * the buffer is complete or is actively being read from. | |
4844 | * | |
4845 | * Record buf_count of last buffer with zero count starting | |
4846 | * from current ring position. buf_count is mirror | |
4847 | * copy of count and is not cleared by serial controller. | |
4848 | * If DMA controller is active, that buffer is actively | |
4849 | * being read so add to total. | |
4850 | */ | |
4851 | do { | |
4852 | count = desc_count(info->tbufs[i]); | |
4853 | if (count) | |
4854 | total_count += count; | |
4855 | else if (!total_count) | |
4856 | active_buf_count = info->tbufs[i].buf_count; | |
4857 | if (++i == info->tbuf_count) | |
4858 | i = 0; | |
4859 | } while (i != info->tbuf_current); | |
4860 | ||
4861 | /* read tx DMA status register */ | |
4862 | reg_value = rd_reg32(info, TDCSR); | |
4863 | ||
4864 | /* if tx DMA active, last zero count buffer is in use */ | |
4865 | if (reg_value & BIT0) | |
4866 | total_count += active_buf_count; | |
4867 | ||
4868 | /* add tx FIFO count = reg_value[15..8] */ | |
4869 | total_count += (reg_value >> 8) & 0xff; | |
4870 | ||
4871 | /* if transmitter active add one byte for shift register */ | |
4872 | if (info->tx_active) | |
4873 | total_count++; | |
4874 | ||
4875 | return total_count; | |
4876 | } | |
4877 | ||
705b6c7b | 4878 | /* |
de538eb3 PF |
4879 | * load data into transmit DMA buffer ring and start transmitter if needed |
4880 | * return true if data accepted, otherwise false (buffers full) | |
705b6c7b | 4881 | */ |
de538eb3 | 4882 | static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) |
705b6c7b PF |
4883 | { |
4884 | unsigned short count; | |
4885 | unsigned int i; | |
4886 | struct slgt_desc *d; | |
4887 | ||
de538eb3 PF |
4888 | /* check required buffer space */ |
4889 | if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) | |
4890 | return false; | |
705b6c7b PF |
4891 | |
4892 | DBGDATA(info, buf, size, "tx"); | |
4893 | ||
de538eb3 PF |
4894 | /* |
4895 | * copy data to one or more DMA buffers in circular ring | |
4896 | * tbuf_start = first buffer for this data | |
4897 | * tbuf_current = next free buffer | |
4898 | * | |
4899 | * Copy all data before making data visible to DMA controller by | |
4900 | * setting descriptor count of the first buffer. | |
4901 | * This prevents an active DMA controller from reading the first DMA | |
4902 | * buffers of a frame and stopping before the final buffers are filled. | |
4903 | */ | |
4904 | ||
705b6c7b PF |
4905 | info->tbuf_start = i = info->tbuf_current; |
4906 | ||
4907 | while (size) { | |
4908 | d = &info->tbufs[i]; | |
705b6c7b PF |
4909 | |
4910 | count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); | |
4911 | memcpy(d->buf, buf, count); | |
4912 | ||
4913 | size -= count; | |
4914 | buf += count; | |
4915 | ||
cb10dc9a PF |
4916 | /* |
4917 | * set EOF bit for last buffer of HDLC frame or | |
4918 | * for every buffer in raw mode | |
4919 | */ | |
4920 | if ((!size && info->params.mode == MGSL_MODE_HDLC) || | |
4921 | info->params.mode == MGSL_MODE_RAW) | |
4922 | set_desc_eof(*d, 1); | |
705b6c7b PF |
4923 | else |
4924 | set_desc_eof(*d, 0); | |
4925 | ||
de538eb3 PF |
4926 | /* set descriptor count for all but first buffer */ |
4927 | if (i != info->tbuf_start) | |
4928 | set_desc_count(*d, count); | |
403214d0 | 4929 | d->buf_count = count; |
de538eb3 PF |
4930 | |
4931 | if (++i == info->tbuf_count) | |
4932 | i = 0; | |
705b6c7b PF |
4933 | } |
4934 | ||
4935 | info->tbuf_current = i; | |
de538eb3 PF |
4936 | |
4937 | /* set first buffer count to make new data visible to DMA controller */ | |
4938 | d = &info->tbufs[info->tbuf_start]; | |
4939 | set_desc_count(*d, d->buf_count); | |
4940 | ||
4941 | /* start transmitter if needed and update transmit timeout */ | |
4942 | if (!info->tx_active) | |
4943 | tx_start(info); | |
4944 | update_tx_timer(info); | |
4945 | ||
4946 | return true; | |
705b6c7b PF |
4947 | } |
4948 | ||
4949 | static int register_test(struct slgt_info *info) | |
4950 | { | |
4951 | static unsigned short patterns[] = | |
4952 | {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; | |
7ea7c6d5 | 4953 | static unsigned int count = ARRAY_SIZE(patterns); |
705b6c7b PF |
4954 | unsigned int i; |
4955 | int rc = 0; | |
4956 | ||
4957 | for (i=0 ; i < count ; i++) { | |
4958 | wr_reg16(info, TIR, patterns[i]); | |
4959 | wr_reg16(info, BDR, patterns[(i+1)%count]); | |
4960 | if ((rd_reg16(info, TIR) != patterns[i]) || | |
4961 | (rd_reg16(info, BDR) != patterns[(i+1)%count])) { | |
4962 | rc = -ENODEV; | |
4963 | break; | |
4964 | } | |
4965 | } | |
0080b7aa | 4966 | info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; |
705b6c7b PF |
4967 | info->init_error = rc ? 0 : DiagStatus_AddressFailure; |
4968 | return rc; | |
4969 | } | |
4970 | ||
4971 | static int irq_test(struct slgt_info *info) | |
4972 | { | |
4973 | unsigned long timeout; | |
4974 | unsigned long flags; | |
8fb06c77 | 4975 | struct tty_struct *oldtty = info->port.tty; |
705b6c7b PF |
4976 | u32 speed = info->params.data_rate; |
4977 | ||
4978 | info->params.data_rate = 921600; | |
8fb06c77 | 4979 | info->port.tty = NULL; |
705b6c7b PF |
4980 | |
4981 | spin_lock_irqsave(&info->lock, flags); | |
4982 | async_mode(info); | |
4983 | slgt_irq_on(info, IRQ_TXIDLE); | |
4984 | ||
4985 | /* enable transmitter */ | |
4986 | wr_reg16(info, TCR, | |
4987 | (unsigned short)(rd_reg16(info, TCR) | BIT1)); | |
4988 | ||
4989 | /* write one byte and wait for tx idle */ | |
4990 | wr_reg16(info, TDR, 0); | |
4991 | ||
4992 | /* assume failure */ | |
4993 | info->init_error = DiagStatus_IrqFailure; | |
0fab6de0 | 4994 | info->irq_occurred = false; |
705b6c7b PF |
4995 | |
4996 | spin_unlock_irqrestore(&info->lock, flags); | |
4997 | ||
4998 | timeout=100; | |
4999 | while(timeout-- && !info->irq_occurred) | |
5000 | msleep_interruptible(10); | |
5001 | ||
5002 | spin_lock_irqsave(&info->lock,flags); | |
5003 | reset_port(info); | |
5004 | spin_unlock_irqrestore(&info->lock,flags); | |
5005 | ||
5006 | info->params.data_rate = speed; | |
8fb06c77 | 5007 | info->port.tty = oldtty; |
705b6c7b PF |
5008 | |
5009 | info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; | |
5010 | return info->irq_occurred ? 0 : -ENODEV; | |
5011 | } | |
5012 | ||
5013 | static int loopback_test_rx(struct slgt_info *info) | |
5014 | { | |
5015 | unsigned char *src, *dest; | |
5016 | int count; | |
5017 | ||
5018 | if (desc_complete(info->rbufs[0])) { | |
5019 | count = desc_count(info->rbufs[0]); | |
5020 | src = info->rbufs[0].buf; | |
5021 | dest = info->tmp_rbuf; | |
5022 | ||
5023 | for( ; count ; count-=2, src+=2) { | |
5024 | /* src=data byte (src+1)=status byte */ | |
5025 | if (!(*(src+1) & (BIT9 + BIT8))) { | |
5026 | *dest = *src; | |
5027 | dest++; | |
5028 | info->tmp_rbuf_count++; | |
5029 | } | |
5030 | } | |
5031 | DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); | |
5032 | return 1; | |
5033 | } | |
5034 | return 0; | |
5035 | } | |
5036 | ||
5037 | static int loopback_test(struct slgt_info *info) | |
5038 | { | |
5039 | #define TESTFRAMESIZE 20 | |
5040 | ||
5041 | unsigned long timeout; | |
5042 | u16 count = TESTFRAMESIZE; | |
5043 | unsigned char buf[TESTFRAMESIZE]; | |
5044 | int rc = -ENODEV; | |
5045 | unsigned long flags; | |
5046 | ||
8fb06c77 | 5047 | struct tty_struct *oldtty = info->port.tty; |
705b6c7b PF |
5048 | MGSL_PARAMS params; |
5049 | ||
5050 | memcpy(¶ms, &info->params, sizeof(params)); | |
5051 | ||
5052 | info->params.mode = MGSL_MODE_ASYNC; | |
5053 | info->params.data_rate = 921600; | |
5054 | info->params.loopback = 1; | |
8fb06c77 | 5055 | info->port.tty = NULL; |
705b6c7b PF |
5056 | |
5057 | /* build and send transmit frame */ | |
5058 | for (count = 0; count < TESTFRAMESIZE; ++count) | |
5059 | buf[count] = (unsigned char)count; | |
5060 | ||
5061 | info->tmp_rbuf_count = 0; | |
5062 | memset(info->tmp_rbuf, 0, TESTFRAMESIZE); | |
5063 | ||
5064 | /* program hardware for HDLC and enabled receiver */ | |
5065 | spin_lock_irqsave(&info->lock,flags); | |
5066 | async_mode(info); | |
5067 | rx_start(info); | |
705b6c7b | 5068 | tx_load(info, buf, count); |
705b6c7b PF |
5069 | spin_unlock_irqrestore(&info->lock, flags); |
5070 | ||
5071 | /* wait for receive complete */ | |
5072 | for (timeout = 100; timeout; --timeout) { | |
5073 | msleep_interruptible(10); | |
5074 | if (loopback_test_rx(info)) { | |
5075 | rc = 0; | |
5076 | break; | |
5077 | } | |
5078 | } | |
5079 | ||
5080 | /* verify received frame length and contents */ | |
5081 | if (!rc && (info->tmp_rbuf_count != count || | |
5082 | memcmp(buf, info->tmp_rbuf, count))) { | |
5083 | rc = -ENODEV; | |
5084 | } | |
5085 | ||
5086 | spin_lock_irqsave(&info->lock,flags); | |
5087 | reset_adapter(info); | |
5088 | spin_unlock_irqrestore(&info->lock,flags); | |
5089 | ||
5090 | memcpy(&info->params, ¶ms, sizeof(info->params)); | |
8fb06c77 | 5091 | info->port.tty = oldtty; |
705b6c7b PF |
5092 | |
5093 | info->init_error = rc ? DiagStatus_DmaFailure : 0; | |
5094 | return rc; | |
5095 | } | |
5096 | ||
5097 | static int adapter_test(struct slgt_info *info) | |
5098 | { | |
5099 | DBGINFO(("testing %s\n", info->device_name)); | |
294dad05 | 5100 | if (register_test(info) < 0) { |
705b6c7b PF |
5101 | printk("register test failure %s addr=%08X\n", |
5102 | info->device_name, info->phys_reg_addr); | |
294dad05 | 5103 | } else if (irq_test(info) < 0) { |
705b6c7b PF |
5104 | printk("IRQ test failure %s IRQ=%d\n", |
5105 | info->device_name, info->irq_level); | |
294dad05 | 5106 | } else if (loopback_test(info) < 0) { |
705b6c7b PF |
5107 | printk("loopback test failure %s\n", info->device_name); |
5108 | } | |
5109 | return info->init_error; | |
5110 | } | |
5111 | ||
5112 | /* | |
5113 | * transmit timeout handler | |
5114 | */ | |
e99e88a9 | 5115 | static void tx_timeout(struct timer_list *t) |
705b6c7b | 5116 | { |
e99e88a9 | 5117 | struct slgt_info *info = from_timer(info, t, tx_timer); |
705b6c7b PF |
5118 | unsigned long flags; |
5119 | ||
5120 | DBGINFO(("%s tx_timeout\n", info->device_name)); | |
5121 | if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { | |
5122 | info->icount.txtimeout++; | |
5123 | } | |
5124 | spin_lock_irqsave(&info->lock,flags); | |
ce89294c | 5125 | tx_stop(info); |
705b6c7b PF |
5126 | spin_unlock_irqrestore(&info->lock,flags); |
5127 | ||
af69c7f9 | 5128 | #if SYNCLINK_GENERIC_HDLC |
705b6c7b PF |
5129 | if (info->netcount) |
5130 | hdlcdev_tx_done(info); | |
5131 | else | |
5132 | #endif | |
5133 | bh_transmit(info); | |
5134 | } | |
5135 | ||
5136 | /* | |
5137 | * receive buffer polling timer | |
5138 | */ | |
e99e88a9 | 5139 | static void rx_timeout(struct timer_list *t) |
705b6c7b | 5140 | { |
e99e88a9 | 5141 | struct slgt_info *info = from_timer(info, t, rx_timer); |
705b6c7b PF |
5142 | unsigned long flags; |
5143 | ||
5144 | DBGINFO(("%s rx_timeout\n", info->device_name)); | |
5145 | spin_lock_irqsave(&info->lock, flags); | |
5146 | info->pending_bh |= BH_RECEIVE; | |
5147 | spin_unlock_irqrestore(&info->lock, flags); | |
c4028958 | 5148 | bh_handler(&info->task); |
705b6c7b PF |
5149 | } |
5150 |