]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * message.c - synchronous message handling | |
3 | */ | |
4 | ||
1da177e4 LT |
5 | #include <linux/pci.h> /* for scatterlist macros */ |
6 | #include <linux/usb.h> | |
7 | #include <linux/module.h> | |
8 | #include <linux/slab.h> | |
9 | #include <linux/init.h> | |
10 | #include <linux/mm.h> | |
11 | #include <linux/timer.h> | |
12 | #include <linux/ctype.h> | |
13 | #include <linux/device.h> | |
7ceec1f1 | 14 | #include <linux/usb/quirks.h> |
1da177e4 | 15 | #include <asm/byteorder.h> |
5d68dfcf | 16 | #include <asm/scatterlist.h> |
1da177e4 LT |
17 | |
18 | #include "hcd.h" /* for usbcore internals */ | |
19 | #include "usb.h" | |
20 | ||
7d12e780 | 21 | static void usb_api_blocking_completion(struct urb *urb) |
1da177e4 LT |
22 | { |
23 | complete((struct completion *)urb->context); | |
24 | } | |
25 | ||
26 | ||
ecdc0a59 FBH |
27 | /* |
28 | * Starts urb and waits for completion or timeout. Note that this call | |
29 | * is NOT interruptible. Many device driver i/o requests should be | |
30 | * interruptible and therefore these drivers should implement their | |
31 | * own interruptible routines. | |
32 | */ | |
33 | static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) | |
1da177e4 | 34 | { |
ecdc0a59 FBH |
35 | struct completion done; |
36 | unsigned long expire; | |
3fc3e826 GKH |
37 | int retval; |
38 | int status = urb->status; | |
1da177e4 LT |
39 | |
40 | init_completion(&done); | |
41 | urb->context = &done; | |
1da177e4 | 42 | urb->actual_length = 0; |
3fc3e826 GKH |
43 | retval = usb_submit_urb(urb, GFP_NOIO); |
44 | if (unlikely(retval)) | |
ecdc0a59 | 45 | goto out; |
1da177e4 | 46 | |
ecdc0a59 FBH |
47 | expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; |
48 | if (!wait_for_completion_timeout(&done, expire)) { | |
49 | ||
50 | dev_dbg(&urb->dev->dev, | |
51 | "%s timed out on ep%d%s len=%d/%d\n", | |
52 | current->comm, | |
53 | usb_pipeendpoint(urb->pipe), | |
54 | usb_pipein(urb->pipe) ? "in" : "out", | |
55 | urb->actual_length, | |
56 | urb->transfer_buffer_length); | |
1da177e4 | 57 | |
ecdc0a59 | 58 | usb_kill_urb(urb); |
3fc3e826 | 59 | retval = status == -ENOENT ? -ETIMEDOUT : status; |
ecdc0a59 | 60 | } else |
3fc3e826 | 61 | retval = status; |
ecdc0a59 | 62 | out: |
1da177e4 LT |
63 | if (actual_length) |
64 | *actual_length = urb->actual_length; | |
ecdc0a59 | 65 | |
1da177e4 | 66 | usb_free_urb(urb); |
3fc3e826 | 67 | return retval; |
1da177e4 LT |
68 | } |
69 | ||
70 | /*-------------------------------------------------------------------*/ | |
71 | // returns status (negative) or length (positive) | |
72 | static int usb_internal_control_msg(struct usb_device *usb_dev, | |
73 | unsigned int pipe, | |
74 | struct usb_ctrlrequest *cmd, | |
75 | void *data, int len, int timeout) | |
76 | { | |
77 | struct urb *urb; | |
78 | int retv; | |
79 | int length; | |
80 | ||
81 | urb = usb_alloc_urb(0, GFP_NOIO); | |
82 | if (!urb) | |
83 | return -ENOMEM; | |
84 | ||
85 | usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data, | |
86 | len, usb_api_blocking_completion, NULL); | |
87 | ||
88 | retv = usb_start_wait_urb(urb, timeout, &length); | |
89 | if (retv < 0) | |
90 | return retv; | |
91 | else | |
92 | return length; | |
93 | } | |
94 | ||
95 | /** | |
96 | * usb_control_msg - Builds a control urb, sends it off and waits for completion | |
97 | * @dev: pointer to the usb device to send the message to | |
98 | * @pipe: endpoint "pipe" to send the message to | |
99 | * @request: USB message request value | |
100 | * @requesttype: USB message request type value | |
101 | * @value: USB message value | |
102 | * @index: USB message index value | |
103 | * @data: pointer to the data to send | |
104 | * @size: length in bytes of the data to send | |
105 | * @timeout: time in msecs to wait for the message to complete before | |
106 | * timing out (if 0 the wait is forever) | |
107 | * Context: !in_interrupt () | |
108 | * | |
109 | * This function sends a simple control message to a specified endpoint | |
110 | * and waits for the message to complete, or timeout. | |
111 | * | |
112 | * If successful, it returns the number of bytes transferred, otherwise a negative error number. | |
113 | * | |
114 | * Don't use this function from within an interrupt context, like a | |
115 | * bottom half handler. If you need an asynchronous message, or need to send | |
116 | * a message from within interrupt context, use usb_submit_urb() | |
117 | * If a thread in your driver uses this call, make sure your disconnect() | |
118 | * method can wait for it to complete. Since you don't have a handle on | |
119 | * the URB used, you can't cancel the request. | |
120 | */ | |
121 | int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, | |
122 | __u16 value, __u16 index, void *data, __u16 size, int timeout) | |
123 | { | |
124 | struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); | |
125 | int ret; | |
126 | ||
127 | if (!dr) | |
128 | return -ENOMEM; | |
129 | ||
130 | dr->bRequestType= requesttype; | |
131 | dr->bRequest = request; | |
132 | dr->wValue = cpu_to_le16p(&value); | |
133 | dr->wIndex = cpu_to_le16p(&index); | |
134 | dr->wLength = cpu_to_le16p(&size); | |
135 | ||
136 | //dbg("usb_control_msg"); | |
137 | ||
138 | ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); | |
139 | ||
140 | kfree(dr); | |
141 | ||
142 | return ret; | |
143 | } | |
144 | ||
145 | ||
782a7a63 GKH |
146 | /** |
147 | * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion | |
148 | * @usb_dev: pointer to the usb device to send the message to | |
149 | * @pipe: endpoint "pipe" to send the message to | |
150 | * @data: pointer to the data to send | |
151 | * @len: length in bytes of the data to send | |
152 | * @actual_length: pointer to a location to put the actual length transferred in bytes | |
153 | * @timeout: time in msecs to wait for the message to complete before | |
154 | * timing out (if 0 the wait is forever) | |
155 | * Context: !in_interrupt () | |
156 | * | |
157 | * This function sends a simple interrupt message to a specified endpoint and | |
158 | * waits for the message to complete, or timeout. | |
159 | * | |
160 | * If successful, it returns 0, otherwise a negative error number. The number | |
161 | * of actual bytes transferred will be stored in the actual_length paramater. | |
162 | * | |
163 | * Don't use this function from within an interrupt context, like a bottom half | |
164 | * handler. If you need an asynchronous message, or need to send a message | |
165 | * from within interrupt context, use usb_submit_urb() If a thread in your | |
166 | * driver uses this call, make sure your disconnect() method can wait for it to | |
167 | * complete. Since you don't have a handle on the URB used, you can't cancel | |
168 | * the request. | |
169 | */ | |
170 | int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, | |
171 | void *data, int len, int *actual_length, int timeout) | |
172 | { | |
173 | return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout); | |
174 | } | |
175 | EXPORT_SYMBOL_GPL(usb_interrupt_msg); | |
176 | ||
1da177e4 LT |
177 | /** |
178 | * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion | |
179 | * @usb_dev: pointer to the usb device to send the message to | |
180 | * @pipe: endpoint "pipe" to send the message to | |
181 | * @data: pointer to the data to send | |
182 | * @len: length in bytes of the data to send | |
183 | * @actual_length: pointer to a location to put the actual length transferred in bytes | |
184 | * @timeout: time in msecs to wait for the message to complete before | |
185 | * timing out (if 0 the wait is forever) | |
186 | * Context: !in_interrupt () | |
187 | * | |
188 | * This function sends a simple bulk message to a specified endpoint | |
189 | * and waits for the message to complete, or timeout. | |
190 | * | |
191 | * If successful, it returns 0, otherwise a negative error number. | |
192 | * The number of actual bytes transferred will be stored in the | |
193 | * actual_length paramater. | |
194 | * | |
195 | * Don't use this function from within an interrupt context, like a | |
196 | * bottom half handler. If you need an asynchronous message, or need to | |
197 | * send a message from within interrupt context, use usb_submit_urb() | |
198 | * If a thread in your driver uses this call, make sure your disconnect() | |
199 | * method can wait for it to complete. Since you don't have a handle on | |
200 | * the URB used, you can't cancel the request. | |
d09d36a9 AS |
201 | * |
202 | * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT | |
203 | * ioctl, users are forced to abuse this routine by using it to submit | |
204 | * URBs for interrupt endpoints. We will take the liberty of creating | |
205 | * an interrupt URB (with the default interval) if the target is an | |
206 | * interrupt endpoint. | |
1da177e4 LT |
207 | */ |
208 | int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, | |
209 | void *data, int len, int *actual_length, int timeout) | |
210 | { | |
211 | struct urb *urb; | |
d09d36a9 | 212 | struct usb_host_endpoint *ep; |
1da177e4 | 213 | |
d09d36a9 AS |
214 | ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out) |
215 | [usb_pipeendpoint(pipe)]; | |
216 | if (!ep || len < 0) | |
1da177e4 LT |
217 | return -EINVAL; |
218 | ||
d09d36a9 | 219 | urb = usb_alloc_urb(0, GFP_KERNEL); |
1da177e4 LT |
220 | if (!urb) |
221 | return -ENOMEM; | |
222 | ||
d09d36a9 AS |
223 | if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
224 | USB_ENDPOINT_XFER_INT) { | |
225 | pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); | |
226 | usb_fill_int_urb(urb, usb_dev, pipe, data, len, | |
8d062b9a AS |
227 | usb_api_blocking_completion, NULL, |
228 | ep->desc.bInterval); | |
d09d36a9 AS |
229 | } else |
230 | usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, | |
231 | usb_api_blocking_completion, NULL); | |
1da177e4 LT |
232 | |
233 | return usb_start_wait_urb(urb, timeout, actual_length); | |
234 | } | |
235 | ||
236 | /*-------------------------------------------------------------------*/ | |
237 | ||
238 | static void sg_clean (struct usb_sg_request *io) | |
239 | { | |
240 | if (io->urbs) { | |
241 | while (io->entries--) | |
242 | usb_free_urb (io->urbs [io->entries]); | |
243 | kfree (io->urbs); | |
244 | io->urbs = NULL; | |
245 | } | |
246 | if (io->dev->dev.dma_mask != NULL) | |
247 | usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents); | |
248 | io->dev = NULL; | |
249 | } | |
250 | ||
7d12e780 | 251 | static void sg_complete (struct urb *urb) |
1da177e4 | 252 | { |
ec17cf1c | 253 | struct usb_sg_request *io = urb->context; |
3fc3e826 | 254 | int status = urb->status; |
1da177e4 LT |
255 | |
256 | spin_lock (&io->lock); | |
257 | ||
258 | /* In 2.5 we require hcds' endpoint queues not to progress after fault | |
259 | * reports, until the completion callback (this!) returns. That lets | |
260 | * device driver code (like this routine) unlink queued urbs first, | |
261 | * if it needs to, since the HC won't work on them at all. So it's | |
262 | * not possible for page N+1 to overwrite page N, and so on. | |
263 | * | |
264 | * That's only for "hard" faults; "soft" faults (unlinks) sometimes | |
265 | * complete before the HCD can get requests away from hardware, | |
266 | * though never during cleanup after a hard fault. | |
267 | */ | |
268 | if (io->status | |
269 | && (io->status != -ECONNRESET | |
3fc3e826 | 270 | || status != -ECONNRESET) |
1da177e4 LT |
271 | && urb->actual_length) { |
272 | dev_err (io->dev->bus->controller, | |
273 | "dev %s ep%d%s scatterlist error %d/%d\n", | |
274 | io->dev->devpath, | |
275 | usb_pipeendpoint (urb->pipe), | |
276 | usb_pipein (urb->pipe) ? "in" : "out", | |
3fc3e826 | 277 | status, io->status); |
1da177e4 LT |
278 | // BUG (); |
279 | } | |
280 | ||
3fc3e826 GKH |
281 | if (io->status == 0 && status && status != -ECONNRESET) { |
282 | int i, found, retval; | |
1da177e4 | 283 | |
3fc3e826 | 284 | io->status = status; |
1da177e4 LT |
285 | |
286 | /* the previous urbs, and this one, completed already. | |
287 | * unlink pending urbs so they won't rx/tx bad data. | |
288 | * careful: unlink can sometimes be synchronous... | |
289 | */ | |
290 | spin_unlock (&io->lock); | |
291 | for (i = 0, found = 0; i < io->entries; i++) { | |
292 | if (!io->urbs [i] || !io->urbs [i]->dev) | |
293 | continue; | |
294 | if (found) { | |
3fc3e826 GKH |
295 | retval = usb_unlink_urb (io->urbs [i]); |
296 | if (retval != -EINPROGRESS && | |
297 | retval != -ENODEV && | |
298 | retval != -EBUSY) | |
1da177e4 LT |
299 | dev_err (&io->dev->dev, |
300 | "%s, unlink --> %d\n", | |
3fc3e826 | 301 | __FUNCTION__, retval); |
1da177e4 LT |
302 | } else if (urb == io->urbs [i]) |
303 | found = 1; | |
304 | } | |
305 | spin_lock (&io->lock); | |
306 | } | |
307 | urb->dev = NULL; | |
308 | ||
309 | /* on the last completion, signal usb_sg_wait() */ | |
310 | io->bytes += urb->actual_length; | |
311 | io->count--; | |
312 | if (!io->count) | |
313 | complete (&io->complete); | |
314 | ||
315 | spin_unlock (&io->lock); | |
316 | } | |
317 | ||
318 | ||
319 | /** | |
320 | * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request | |
321 | * @io: request block being initialized. until usb_sg_wait() returns, | |
322 | * treat this as a pointer to an opaque block of memory, | |
323 | * @dev: the usb device that will send or receive the data | |
324 | * @pipe: endpoint "pipe" used to transfer the data | |
325 | * @period: polling rate for interrupt endpoints, in frames or | |
326 | * (for high speed endpoints) microframes; ignored for bulk | |
327 | * @sg: scatterlist entries | |
328 | * @nents: how many entries in the scatterlist | |
329 | * @length: how many bytes to send from the scatterlist, or zero to | |
330 | * send every byte identified in the list. | |
331 | * @mem_flags: SLAB_* flags affecting memory allocations in this call | |
332 | * | |
333 | * Returns zero for success, else a negative errno value. This initializes a | |
334 | * scatter/gather request, allocating resources such as I/O mappings and urb | |
335 | * memory (except maybe memory used by USB controller drivers). | |
336 | * | |
337 | * The request must be issued using usb_sg_wait(), which waits for the I/O to | |
338 | * complete (or to be canceled) and then cleans up all resources allocated by | |
339 | * usb_sg_init(). | |
340 | * | |
341 | * The request may be canceled with usb_sg_cancel(), either before or after | |
342 | * usb_sg_wait() is called. | |
343 | */ | |
344 | int usb_sg_init ( | |
345 | struct usb_sg_request *io, | |
346 | struct usb_device *dev, | |
347 | unsigned pipe, | |
348 | unsigned period, | |
349 | struct scatterlist *sg, | |
350 | int nents, | |
351 | size_t length, | |
55016f10 | 352 | gfp_t mem_flags |
1da177e4 LT |
353 | ) |
354 | { | |
355 | int i; | |
356 | int urb_flags; | |
357 | int dma; | |
358 | ||
359 | if (!io || !dev || !sg | |
360 | || usb_pipecontrol (pipe) | |
361 | || usb_pipeisoc (pipe) | |
362 | || nents <= 0) | |
363 | return -EINVAL; | |
364 | ||
365 | spin_lock_init (&io->lock); | |
366 | io->dev = dev; | |
367 | io->pipe = pipe; | |
368 | io->sg = sg; | |
369 | io->nents = nents; | |
370 | ||
371 | /* not all host controllers use DMA (like the mainstream pci ones); | |
372 | * they can use PIO (sl811) or be software over another transport. | |
373 | */ | |
374 | dma = (dev->dev.dma_mask != NULL); | |
375 | if (dma) | |
376 | io->entries = usb_buffer_map_sg (dev, pipe, sg, nents); | |
377 | else | |
378 | io->entries = nents; | |
379 | ||
380 | /* initialize all the urbs we'll use */ | |
381 | if (io->entries <= 0) | |
382 | return io->entries; | |
383 | ||
384 | io->count = io->entries; | |
385 | io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags); | |
386 | if (!io->urbs) | |
387 | goto nomem; | |
388 | ||
b375a049 | 389 | urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT; |
1da177e4 LT |
390 | if (usb_pipein (pipe)) |
391 | urb_flags |= URB_SHORT_NOT_OK; | |
392 | ||
393 | for (i = 0; i < io->entries; i++) { | |
394 | unsigned len; | |
395 | ||
396 | io->urbs [i] = usb_alloc_urb (0, mem_flags); | |
397 | if (!io->urbs [i]) { | |
398 | io->entries = i; | |
399 | goto nomem; | |
400 | } | |
401 | ||
402 | io->urbs [i]->dev = NULL; | |
403 | io->urbs [i]->pipe = pipe; | |
404 | io->urbs [i]->interval = period; | |
405 | io->urbs [i]->transfer_flags = urb_flags; | |
406 | ||
407 | io->urbs [i]->complete = sg_complete; | |
408 | io->urbs [i]->context = io; | |
1da177e4 | 409 | |
35d07fd5 TL |
410 | /* |
411 | * Some systems need to revert to PIO when DMA is temporarily | |
412 | * unavailable. For their sakes, both transfer_buffer and | |
413 | * transfer_dma are set when possible. However this can only | |
414 | * work on systems without HIGHMEM, since DMA buffers located | |
415 | * in high memory are not directly addressable by the CPU for | |
416 | * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL | |
417 | * to prevent stale pointers and to help spot bugs. | |
418 | */ | |
1da177e4 | 419 | if (dma) { |
1da177e4 LT |
420 | io->urbs [i]->transfer_dma = sg_dma_address (sg + i); |
421 | len = sg_dma_len (sg + i); | |
35d07fd5 TL |
422 | #ifdef CONFIG_HIGHMEM |
423 | io->urbs[i]->transfer_buffer = NULL; | |
424 | #else | |
425 | io->urbs[i]->transfer_buffer = | |
426 | page_address(sg[i].page) + sg[i].offset; | |
427 | #endif | |
1da177e4 LT |
428 | } else { |
429 | /* hc may use _only_ transfer_buffer */ | |
430 | io->urbs [i]->transfer_buffer = | |
431 | page_address (sg [i].page) + sg [i].offset; | |
432 | len = sg [i].length; | |
433 | } | |
434 | ||
435 | if (length) { | |
436 | len = min_t (unsigned, len, length); | |
437 | length -= len; | |
438 | if (length == 0) | |
439 | io->entries = i + 1; | |
440 | } | |
441 | io->urbs [i]->transfer_buffer_length = len; | |
442 | } | |
443 | io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT; | |
444 | ||
445 | /* transaction state */ | |
446 | io->status = 0; | |
447 | io->bytes = 0; | |
448 | init_completion (&io->complete); | |
449 | return 0; | |
450 | ||
451 | nomem: | |
452 | sg_clean (io); | |
453 | return -ENOMEM; | |
454 | } | |
455 | ||
456 | ||
457 | /** | |
458 | * usb_sg_wait - synchronously execute scatter/gather request | |
459 | * @io: request block handle, as initialized with usb_sg_init(). | |
460 | * some fields become accessible when this call returns. | |
461 | * Context: !in_interrupt () | |
462 | * | |
463 | * This function blocks until the specified I/O operation completes. It | |
464 | * leverages the grouping of the related I/O requests to get good transfer | |
465 | * rates, by queueing the requests. At higher speeds, such queuing can | |
466 | * significantly improve USB throughput. | |
467 | * | |
468 | * There are three kinds of completion for this function. | |
469 | * (1) success, where io->status is zero. The number of io->bytes | |
470 | * transferred is as requested. | |
471 | * (2) error, where io->status is a negative errno value. The number | |
472 | * of io->bytes transferred before the error is usually less | |
473 | * than requested, and can be nonzero. | |
093cf723 | 474 | * (3) cancellation, a type of error with status -ECONNRESET that |
1da177e4 LT |
475 | * is initiated by usb_sg_cancel(). |
476 | * | |
477 | * When this function returns, all memory allocated through usb_sg_init() or | |
478 | * this call will have been freed. The request block parameter may still be | |
479 | * passed to usb_sg_cancel(), or it may be freed. It could also be | |
480 | * reinitialized and then reused. | |
481 | * | |
482 | * Data Transfer Rates: | |
483 | * | |
484 | * Bulk transfers are valid for full or high speed endpoints. | |
485 | * The best full speed data rate is 19 packets of 64 bytes each | |
486 | * per frame, or 1216 bytes per millisecond. | |
487 | * The best high speed data rate is 13 packets of 512 bytes each | |
488 | * per microframe, or 52 KBytes per millisecond. | |
489 | * | |
490 | * The reason to use interrupt transfers through this API would most likely | |
491 | * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond | |
492 | * could be transferred. That capability is less useful for low or full | |
493 | * speed interrupt endpoints, which allow at most one packet per millisecond, | |
494 | * of at most 8 or 64 bytes (respectively). | |
495 | */ | |
496 | void usb_sg_wait (struct usb_sg_request *io) | |
497 | { | |
498 | int i, entries = io->entries; | |
499 | ||
500 | /* queue the urbs. */ | |
501 | spin_lock_irq (&io->lock); | |
8ccef0df AS |
502 | i = 0; |
503 | while (i < entries && !io->status) { | |
1da177e4 LT |
504 | int retval; |
505 | ||
506 | io->urbs [i]->dev = io->dev; | |
54e6ecb2 | 507 | retval = usb_submit_urb (io->urbs [i], GFP_ATOMIC); |
1da177e4 LT |
508 | |
509 | /* after we submit, let completions or cancelations fire; | |
510 | * we handshake using io->status. | |
511 | */ | |
512 | spin_unlock_irq (&io->lock); | |
513 | switch (retval) { | |
514 | /* maybe we retrying will recover */ | |
515 | case -ENXIO: // hc didn't queue this one | |
516 | case -EAGAIN: | |
517 | case -ENOMEM: | |
518 | io->urbs[i]->dev = NULL; | |
519 | retval = 0; | |
1da177e4 LT |
520 | yield (); |
521 | break; | |
522 | ||
523 | /* no error? continue immediately. | |
524 | * | |
525 | * NOTE: to work better with UHCI (4K I/O buffer may | |
526 | * need 3K of TDs) it may be good to limit how many | |
527 | * URBs are queued at once; N milliseconds? | |
528 | */ | |
529 | case 0: | |
8ccef0df | 530 | ++i; |
1da177e4 LT |
531 | cpu_relax (); |
532 | break; | |
533 | ||
534 | /* fail any uncompleted urbs */ | |
535 | default: | |
536 | io->urbs [i]->dev = NULL; | |
537 | io->urbs [i]->status = retval; | |
538 | dev_dbg (&io->dev->dev, "%s, submit --> %d\n", | |
539 | __FUNCTION__, retval); | |
540 | usb_sg_cancel (io); | |
541 | } | |
542 | spin_lock_irq (&io->lock); | |
543 | if (retval && (io->status == 0 || io->status == -ECONNRESET)) | |
544 | io->status = retval; | |
545 | } | |
546 | io->count -= entries - i; | |
547 | if (io->count == 0) | |
548 | complete (&io->complete); | |
549 | spin_unlock_irq (&io->lock); | |
550 | ||
551 | /* OK, yes, this could be packaged as non-blocking. | |
552 | * So could the submit loop above ... but it's easier to | |
553 | * solve neither problem than to solve both! | |
554 | */ | |
555 | wait_for_completion (&io->complete); | |
556 | ||
557 | sg_clean (io); | |
558 | } | |
559 | ||
560 | /** | |
561 | * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait() | |
562 | * @io: request block, initialized with usb_sg_init() | |
563 | * | |
564 | * This stops a request after it has been started by usb_sg_wait(). | |
565 | * It can also prevents one initialized by usb_sg_init() from starting, | |
566 | * so that call just frees resources allocated to the request. | |
567 | */ | |
568 | void usb_sg_cancel (struct usb_sg_request *io) | |
569 | { | |
570 | unsigned long flags; | |
571 | ||
572 | spin_lock_irqsave (&io->lock, flags); | |
573 | ||
574 | /* shut everything down, if it didn't already */ | |
575 | if (!io->status) { | |
576 | int i; | |
577 | ||
578 | io->status = -ECONNRESET; | |
579 | spin_unlock (&io->lock); | |
580 | for (i = 0; i < io->entries; i++) { | |
581 | int retval; | |
582 | ||
583 | if (!io->urbs [i]->dev) | |
584 | continue; | |
585 | retval = usb_unlink_urb (io->urbs [i]); | |
586 | if (retval != -EINPROGRESS && retval != -EBUSY) | |
587 | dev_warn (&io->dev->dev, "%s, unlink --> %d\n", | |
588 | __FUNCTION__, retval); | |
589 | } | |
590 | spin_lock (&io->lock); | |
591 | } | |
592 | spin_unlock_irqrestore (&io->lock, flags); | |
593 | } | |
594 | ||
595 | /*-------------------------------------------------------------------*/ | |
596 | ||
597 | /** | |
598 | * usb_get_descriptor - issues a generic GET_DESCRIPTOR request | |
599 | * @dev: the device whose descriptor is being retrieved | |
600 | * @type: the descriptor type (USB_DT_*) | |
601 | * @index: the number of the descriptor | |
602 | * @buf: where to put the descriptor | |
603 | * @size: how big is "buf"? | |
604 | * Context: !in_interrupt () | |
605 | * | |
606 | * Gets a USB descriptor. Convenience functions exist to simplify | |
607 | * getting some types of descriptors. Use | |
608 | * usb_get_string() or usb_string() for USB_DT_STRING. | |
609 | * Device (USB_DT_DEVICE) and configuration descriptors (USB_DT_CONFIG) | |
610 | * are part of the device structure. | |
611 | * In addition to a number of USB-standard descriptors, some | |
612 | * devices also use class-specific or vendor-specific descriptors. | |
613 | * | |
614 | * This call is synchronous, and may not be used in an interrupt context. | |
615 | * | |
616 | * Returns the number of bytes received on success, or else the status code | |
617 | * returned by the underlying usb_control_msg() call. | |
618 | */ | |
619 | int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size) | |
620 | { | |
621 | int i; | |
622 | int result; | |
623 | ||
624 | memset(buf,0,size); // Make sure we parse really received data | |
625 | ||
626 | for (i = 0; i < 3; ++i) { | |
627 | /* retry on length 0 or stall; some devices are flakey */ | |
628 | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
629 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, | |
630 | (type << 8) + index, 0, buf, size, | |
631 | USB_CTRL_GET_TIMEOUT); | |
632 | if (result == 0 || result == -EPIPE) | |
633 | continue; | |
634 | if (result > 1 && ((u8 *)buf)[1] != type) { | |
635 | result = -EPROTO; | |
636 | continue; | |
637 | } | |
638 | break; | |
639 | } | |
640 | return result; | |
641 | } | |
642 | ||
643 | /** | |
644 | * usb_get_string - gets a string descriptor | |
645 | * @dev: the device whose string descriptor is being retrieved | |
646 | * @langid: code for language chosen (from string descriptor zero) | |
647 | * @index: the number of the descriptor | |
648 | * @buf: where to put the string | |
649 | * @size: how big is "buf"? | |
650 | * Context: !in_interrupt () | |
651 | * | |
652 | * Retrieves a string, encoded using UTF-16LE (Unicode, 16 bits per character, | |
653 | * in little-endian byte order). | |
654 | * The usb_string() function will often be a convenient way to turn | |
655 | * these strings into kernel-printable form. | |
656 | * | |
657 | * Strings may be referenced in device, configuration, interface, or other | |
658 | * descriptors, and could also be used in vendor-specific ways. | |
659 | * | |
660 | * This call is synchronous, and may not be used in an interrupt context. | |
661 | * | |
662 | * Returns the number of bytes received on success, or else the status code | |
663 | * returned by the underlying usb_control_msg() call. | |
664 | */ | |
e266a124 AB |
665 | static int usb_get_string(struct usb_device *dev, unsigned short langid, |
666 | unsigned char index, void *buf, int size) | |
1da177e4 LT |
667 | { |
668 | int i; | |
669 | int result; | |
670 | ||
671 | for (i = 0; i < 3; ++i) { | |
672 | /* retry on length 0 or stall; some devices are flakey */ | |
673 | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
674 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, | |
675 | (USB_DT_STRING << 8) + index, langid, buf, size, | |
676 | USB_CTRL_GET_TIMEOUT); | |
677 | if (!(result == 0 || result == -EPIPE)) | |
678 | break; | |
679 | } | |
680 | return result; | |
681 | } | |
682 | ||
683 | static void usb_try_string_workarounds(unsigned char *buf, int *length) | |
684 | { | |
685 | int newlength, oldlength = *length; | |
686 | ||
687 | for (newlength = 2; newlength + 1 < oldlength; newlength += 2) | |
688 | if (!isprint(buf[newlength]) || buf[newlength + 1]) | |
689 | break; | |
690 | ||
691 | if (newlength > 2) { | |
692 | buf[0] = newlength; | |
693 | *length = newlength; | |
694 | } | |
695 | } | |
696 | ||
697 | static int usb_string_sub(struct usb_device *dev, unsigned int langid, | |
698 | unsigned int index, unsigned char *buf) | |
699 | { | |
700 | int rc; | |
701 | ||
702 | /* Try to read the string descriptor by asking for the maximum | |
703 | * possible number of bytes */ | |
7ceec1f1 ON |
704 | if (dev->quirks & USB_QUIRK_STRING_FETCH_255) |
705 | rc = -EIO; | |
706 | else | |
707 | rc = usb_get_string(dev, langid, index, buf, 255); | |
1da177e4 LT |
708 | |
709 | /* If that failed try to read the descriptor length, then | |
710 | * ask for just that many bytes */ | |
711 | if (rc < 2) { | |
712 | rc = usb_get_string(dev, langid, index, buf, 2); | |
713 | if (rc == 2) | |
714 | rc = usb_get_string(dev, langid, index, buf, buf[0]); | |
715 | } | |
716 | ||
717 | if (rc >= 2) { | |
718 | if (!buf[0] && !buf[1]) | |
719 | usb_try_string_workarounds(buf, &rc); | |
720 | ||
721 | /* There might be extra junk at the end of the descriptor */ | |
722 | if (buf[0] < rc) | |
723 | rc = buf[0]; | |
724 | ||
725 | rc = rc - (rc & 1); /* force a multiple of two */ | |
726 | } | |
727 | ||
728 | if (rc < 2) | |
729 | rc = (rc < 0 ? rc : -EINVAL); | |
730 | ||
731 | return rc; | |
732 | } | |
733 | ||
734 | /** | |
735 | * usb_string - returns ISO 8859-1 version of a string descriptor | |
736 | * @dev: the device whose string descriptor is being retrieved | |
737 | * @index: the number of the descriptor | |
738 | * @buf: where to put the string | |
739 | * @size: how big is "buf"? | |
740 | * Context: !in_interrupt () | |
741 | * | |
742 | * This converts the UTF-16LE encoded strings returned by devices, from | |
743 | * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones | |
744 | * that are more usable in most kernel contexts. Note that all characters | |
745 | * in the chosen descriptor that can't be encoded using ISO-8859-1 | |
746 | * are converted to the question mark ("?") character, and this function | |
747 | * chooses strings in the first language supported by the device. | |
748 | * | |
749 | * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit | |
750 | * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode, | |
751 | * and is appropriate for use many uses of English and several other | |
752 | * Western European languages. (But it doesn't include the "Euro" symbol.) | |
753 | * | |
754 | * This call is synchronous, and may not be used in an interrupt context. | |
755 | * | |
756 | * Returns length of the string (>= 0) or usb_control_msg status (< 0). | |
757 | */ | |
758 | int usb_string(struct usb_device *dev, int index, char *buf, size_t size) | |
759 | { | |
760 | unsigned char *tbuf; | |
761 | int err; | |
762 | unsigned int u, idx; | |
763 | ||
764 | if (dev->state == USB_STATE_SUSPENDED) | |
765 | return -EHOSTUNREACH; | |
766 | if (size <= 0 || !buf || !index) | |
767 | return -EINVAL; | |
768 | buf[0] = 0; | |
769 | tbuf = kmalloc(256, GFP_KERNEL); | |
770 | if (!tbuf) | |
771 | return -ENOMEM; | |
772 | ||
773 | /* get langid for strings if it's not yet known */ | |
774 | if (!dev->have_langid) { | |
775 | err = usb_string_sub(dev, 0, 0, tbuf); | |
776 | if (err < 0) { | |
777 | dev_err (&dev->dev, | |
778 | "string descriptor 0 read error: %d\n", | |
779 | err); | |
780 | goto errout; | |
781 | } else if (err < 4) { | |
782 | dev_err (&dev->dev, "string descriptor 0 too short\n"); | |
783 | err = -EINVAL; | |
784 | goto errout; | |
785 | } else { | |
ce361587 | 786 | dev->have_langid = 1; |
1da177e4 LT |
787 | dev->string_langid = tbuf[2] | (tbuf[3]<< 8); |
788 | /* always use the first langid listed */ | |
789 | dev_dbg (&dev->dev, "default language 0x%04x\n", | |
790 | dev->string_langid); | |
791 | } | |
792 | } | |
793 | ||
794 | err = usb_string_sub(dev, dev->string_langid, index, tbuf); | |
795 | if (err < 0) | |
796 | goto errout; | |
797 | ||
798 | size--; /* leave room for trailing NULL char in output buffer */ | |
799 | for (idx = 0, u = 2; u < err; u += 2) { | |
800 | if (idx >= size) | |
801 | break; | |
802 | if (tbuf[u+1]) /* high byte */ | |
803 | buf[idx++] = '?'; /* non ISO-8859-1 character */ | |
804 | else | |
805 | buf[idx++] = tbuf[u]; | |
806 | } | |
807 | buf[idx] = 0; | |
808 | err = idx; | |
809 | ||
810 | if (tbuf[1] != USB_DT_STRING) | |
811 | dev_dbg(&dev->dev, "wrong descriptor type %02x for string %d (\"%s\")\n", tbuf[1], index, buf); | |
812 | ||
813 | errout: | |
814 | kfree(tbuf); | |
815 | return err; | |
816 | } | |
817 | ||
4f62efe6 AS |
818 | /** |
819 | * usb_cache_string - read a string descriptor and cache it for later use | |
820 | * @udev: the device whose string descriptor is being read | |
821 | * @index: the descriptor index | |
822 | * | |
823 | * Returns a pointer to a kmalloc'ed buffer containing the descriptor string, | |
824 | * or NULL if the index is 0 or the string could not be read. | |
825 | */ | |
826 | char *usb_cache_string(struct usb_device *udev, int index) | |
827 | { | |
828 | char *buf; | |
829 | char *smallbuf = NULL; | |
830 | int len; | |
831 | ||
832 | if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) { | |
833 | if ((len = usb_string(udev, index, buf, 256)) > 0) { | |
834 | if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL) | |
835 | return buf; | |
836 | memcpy(smallbuf, buf, len); | |
837 | } | |
838 | kfree(buf); | |
839 | } | |
840 | return smallbuf; | |
841 | } | |
842 | ||
1da177e4 LT |
843 | /* |
844 | * usb_get_device_descriptor - (re)reads the device descriptor (usbcore) | |
845 | * @dev: the device whose device descriptor is being updated | |
846 | * @size: how much of the descriptor to read | |
847 | * Context: !in_interrupt () | |
848 | * | |
849 | * Updates the copy of the device descriptor stored in the device structure, | |
6ab16a90 | 850 | * which dedicates space for this purpose. |
1da177e4 LT |
851 | * |
852 | * Not exported, only for use by the core. If drivers really want to read | |
853 | * the device descriptor directly, they can call usb_get_descriptor() with | |
854 | * type = USB_DT_DEVICE and index = 0. | |
855 | * | |
856 | * This call is synchronous, and may not be used in an interrupt context. | |
857 | * | |
858 | * Returns the number of bytes received on success, or else the status code | |
859 | * returned by the underlying usb_control_msg() call. | |
860 | */ | |
861 | int usb_get_device_descriptor(struct usb_device *dev, unsigned int size) | |
862 | { | |
863 | struct usb_device_descriptor *desc; | |
864 | int ret; | |
865 | ||
866 | if (size > sizeof(*desc)) | |
867 | return -EINVAL; | |
868 | desc = kmalloc(sizeof(*desc), GFP_NOIO); | |
869 | if (!desc) | |
870 | return -ENOMEM; | |
871 | ||
872 | ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size); | |
873 | if (ret >= 0) | |
874 | memcpy(&dev->descriptor, desc, size); | |
875 | kfree(desc); | |
876 | return ret; | |
877 | } | |
878 | ||
879 | /** | |
880 | * usb_get_status - issues a GET_STATUS call | |
881 | * @dev: the device whose status is being checked | |
882 | * @type: USB_RECIP_*; for device, interface, or endpoint | |
883 | * @target: zero (for device), else interface or endpoint number | |
884 | * @data: pointer to two bytes of bitmap data | |
885 | * Context: !in_interrupt () | |
886 | * | |
887 | * Returns device, interface, or endpoint status. Normally only of | |
888 | * interest to see if the device is self powered, or has enabled the | |
889 | * remote wakeup facility; or whether a bulk or interrupt endpoint | |
890 | * is halted ("stalled"). | |
891 | * | |
892 | * Bits in these status bitmaps are set using the SET_FEATURE request, | |
893 | * and cleared using the CLEAR_FEATURE request. The usb_clear_halt() | |
894 | * function should be used to clear halt ("stall") status. | |
895 | * | |
896 | * This call is synchronous, and may not be used in an interrupt context. | |
897 | * | |
898 | * Returns the number of bytes received on success, or else the status code | |
899 | * returned by the underlying usb_control_msg() call. | |
900 | */ | |
901 | int usb_get_status(struct usb_device *dev, int type, int target, void *data) | |
902 | { | |
903 | int ret; | |
904 | u16 *status = kmalloc(sizeof(*status), GFP_KERNEL); | |
905 | ||
906 | if (!status) | |
907 | return -ENOMEM; | |
908 | ||
909 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
910 | USB_REQ_GET_STATUS, USB_DIR_IN | type, 0, target, status, | |
911 | sizeof(*status), USB_CTRL_GET_TIMEOUT); | |
912 | ||
913 | *(u16 *)data = *status; | |
914 | kfree(status); | |
915 | return ret; | |
916 | } | |
917 | ||
918 | /** | |
919 | * usb_clear_halt - tells device to clear endpoint halt/stall condition | |
920 | * @dev: device whose endpoint is halted | |
921 | * @pipe: endpoint "pipe" being cleared | |
922 | * Context: !in_interrupt () | |
923 | * | |
924 | * This is used to clear halt conditions for bulk and interrupt endpoints, | |
925 | * as reported by URB completion status. Endpoints that are halted are | |
926 | * sometimes referred to as being "stalled". Such endpoints are unable | |
927 | * to transmit or receive data until the halt status is cleared. Any URBs | |
928 | * queued for such an endpoint should normally be unlinked by the driver | |
929 | * before clearing the halt condition, as described in sections 5.7.5 | |
930 | * and 5.8.5 of the USB 2.0 spec. | |
931 | * | |
932 | * Note that control and isochronous endpoints don't halt, although control | |
933 | * endpoints report "protocol stall" (for unsupported requests) using the | |
934 | * same status code used to report a true stall. | |
935 | * | |
936 | * This call is synchronous, and may not be used in an interrupt context. | |
937 | * | |
938 | * Returns zero on success, or else the status code returned by the | |
939 | * underlying usb_control_msg() call. | |
940 | */ | |
941 | int usb_clear_halt(struct usb_device *dev, int pipe) | |
942 | { | |
943 | int result; | |
944 | int endp = usb_pipeendpoint(pipe); | |
945 | ||
946 | if (usb_pipein (pipe)) | |
947 | endp |= USB_DIR_IN; | |
948 | ||
949 | /* we don't care if it wasn't halted first. in fact some devices | |
950 | * (like some ibmcam model 1 units) seem to expect hosts to make | |
951 | * this request for iso endpoints, which can't halt! | |
952 | */ | |
953 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
954 | USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, | |
955 | USB_ENDPOINT_HALT, endp, NULL, 0, | |
956 | USB_CTRL_SET_TIMEOUT); | |
957 | ||
958 | /* don't un-halt or force to DATA0 except on success */ | |
959 | if (result < 0) | |
960 | return result; | |
961 | ||
962 | /* NOTE: seems like Microsoft and Apple don't bother verifying | |
963 | * the clear "took", so some devices could lock up if you check... | |
964 | * such as the Hagiwara FlashGate DUAL. So we won't bother. | |
965 | * | |
966 | * NOTE: make sure the logic here doesn't diverge much from | |
967 | * the copy in usb-storage, for as long as we need two copies. | |
968 | */ | |
969 | ||
970 | /* toggle was reset by the clear */ | |
971 | usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); | |
972 | ||
973 | return 0; | |
974 | } | |
975 | ||
976 | /** | |
977 | * usb_disable_endpoint -- Disable an endpoint by address | |
978 | * @dev: the device whose endpoint is being disabled | |
979 | * @epaddr: the endpoint's address. Endpoint number for output, | |
980 | * endpoint number + USB_DIR_IN for input | |
981 | * | |
982 | * Deallocates hcd/hardware state for this endpoint ... and nukes all | |
983 | * pending urbs. | |
984 | * | |
985 | * If the HCD hasn't registered a disable() function, this sets the | |
986 | * endpoint's maxpacket size to 0 to prevent further submissions. | |
987 | */ | |
988 | void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) | |
989 | { | |
990 | unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; | |
991 | struct usb_host_endpoint *ep; | |
992 | ||
993 | if (!dev) | |
994 | return; | |
995 | ||
996 | if (usb_endpoint_out(epaddr)) { | |
997 | ep = dev->ep_out[epnum]; | |
998 | dev->ep_out[epnum] = NULL; | |
999 | } else { | |
1000 | ep = dev->ep_in[epnum]; | |
1001 | dev->ep_in[epnum] = NULL; | |
1002 | } | |
a6d2bb9f AS |
1003 | if (ep && dev->bus) |
1004 | usb_hcd_endpoint_disable(dev, ep); | |
1da177e4 LT |
1005 | } |
1006 | ||
1007 | /** | |
1008 | * usb_disable_interface -- Disable all endpoints for an interface | |
1009 | * @dev: the device whose interface is being disabled | |
1010 | * @intf: pointer to the interface descriptor | |
1011 | * | |
1012 | * Disables all the endpoints for the interface's current altsetting. | |
1013 | */ | |
1014 | void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) | |
1015 | { | |
1016 | struct usb_host_interface *alt = intf->cur_altsetting; | |
1017 | int i; | |
1018 | ||
1019 | for (i = 0; i < alt->desc.bNumEndpoints; ++i) { | |
1020 | usb_disable_endpoint(dev, | |
1021 | alt->endpoint[i].desc.bEndpointAddress); | |
1022 | } | |
1023 | } | |
1024 | ||
1025 | /* | |
1026 | * usb_disable_device - Disable all the endpoints for a USB device | |
1027 | * @dev: the device whose endpoints are being disabled | |
1028 | * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. | |
1029 | * | |
1030 | * Disables all the device's endpoints, potentially including endpoint 0. | |
1031 | * Deallocates hcd/hardware state for the endpoints (nuking all or most | |
1032 | * pending urbs) and usbcore state for the interfaces, so that usbcore | |
1033 | * must usb_set_configuration() before any interfaces could be used. | |
1034 | */ | |
1035 | void usb_disable_device(struct usb_device *dev, int skip_ep0) | |
1036 | { | |
1037 | int i; | |
1038 | ||
1039 | dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__, | |
1040 | skip_ep0 ? "non-ep0" : "all"); | |
1041 | for (i = skip_ep0; i < 16; ++i) { | |
1042 | usb_disable_endpoint(dev, i); | |
1043 | usb_disable_endpoint(dev, i + USB_DIR_IN); | |
1044 | } | |
1045 | dev->toggle[0] = dev->toggle[1] = 0; | |
1046 | ||
1047 | /* getting rid of interfaces will disconnect | |
1048 | * any drivers bound to them (a key side effect) | |
1049 | */ | |
1050 | if (dev->actconfig) { | |
1051 | for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { | |
1052 | struct usb_interface *interface; | |
1053 | ||
86d30741 | 1054 | /* remove this interface if it has been registered */ |
1da177e4 | 1055 | interface = dev->actconfig->interface[i]; |
d305ef5d | 1056 | if (!device_is_registered(&interface->dev)) |
86d30741 | 1057 | continue; |
1da177e4 LT |
1058 | dev_dbg (&dev->dev, "unregistering interface %s\n", |
1059 | interface->dev.bus_id); | |
1060 | usb_remove_sysfs_intf_files(interface); | |
1da177e4 LT |
1061 | device_del (&interface->dev); |
1062 | } | |
1063 | ||
1064 | /* Now that the interfaces are unbound, nobody should | |
1065 | * try to access them. | |
1066 | */ | |
1067 | for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { | |
1068 | put_device (&dev->actconfig->interface[i]->dev); | |
1069 | dev->actconfig->interface[i] = NULL; | |
1070 | } | |
1071 | dev->actconfig = NULL; | |
1072 | if (dev->state == USB_STATE_CONFIGURED) | |
1073 | usb_set_device_state(dev, USB_STATE_ADDRESS); | |
1074 | } | |
1075 | } | |
1076 | ||
1077 | ||
1078 | /* | |
1079 | * usb_enable_endpoint - Enable an endpoint for USB communications | |
1080 | * @dev: the device whose interface is being enabled | |
1081 | * @ep: the endpoint | |
1082 | * | |
1083 | * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers. | |
1084 | * For control endpoints, both the input and output sides are handled. | |
1085 | */ | |
1086 | static void | |
1087 | usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep) | |
1088 | { | |
1089 | unsigned int epaddr = ep->desc.bEndpointAddress; | |
1090 | unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; | |
1091 | int is_control; | |
1092 | ||
1093 | is_control = ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) | |
1094 | == USB_ENDPOINT_XFER_CONTROL); | |
1095 | if (usb_endpoint_out(epaddr) || is_control) { | |
1096 | usb_settoggle(dev, epnum, 1, 0); | |
1097 | dev->ep_out[epnum] = ep; | |
1098 | } | |
1099 | if (!usb_endpoint_out(epaddr) || is_control) { | |
1100 | usb_settoggle(dev, epnum, 0, 0); | |
1101 | dev->ep_in[epnum] = ep; | |
1102 | } | |
1103 | } | |
1104 | ||
1105 | /* | |
1106 | * usb_enable_interface - Enable all the endpoints for an interface | |
1107 | * @dev: the device whose interface is being enabled | |
1108 | * @intf: pointer to the interface descriptor | |
1109 | * | |
1110 | * Enables all the endpoints for the interface's current altsetting. | |
1111 | */ | |
1112 | static void usb_enable_interface(struct usb_device *dev, | |
1113 | struct usb_interface *intf) | |
1114 | { | |
1115 | struct usb_host_interface *alt = intf->cur_altsetting; | |
1116 | int i; | |
1117 | ||
1118 | for (i = 0; i < alt->desc.bNumEndpoints; ++i) | |
1119 | usb_enable_endpoint(dev, &alt->endpoint[i]); | |
1120 | } | |
1121 | ||
1122 | /** | |
1123 | * usb_set_interface - Makes a particular alternate setting be current | |
1124 | * @dev: the device whose interface is being updated | |
1125 | * @interface: the interface being updated | |
1126 | * @alternate: the setting being chosen. | |
1127 | * Context: !in_interrupt () | |
1128 | * | |
1129 | * This is used to enable data transfers on interfaces that may not | |
1130 | * be enabled by default. Not all devices support such configurability. | |
1131 | * Only the driver bound to an interface may change its setting. | |
1132 | * | |
1133 | * Within any given configuration, each interface may have several | |
1134 | * alternative settings. These are often used to control levels of | |
1135 | * bandwidth consumption. For example, the default setting for a high | |
1136 | * speed interrupt endpoint may not send more than 64 bytes per microframe, | |
1137 | * while interrupt transfers of up to 3KBytes per microframe are legal. | |
1138 | * Also, isochronous endpoints may never be part of an | |
1139 | * interface's default setting. To access such bandwidth, alternate | |
1140 | * interface settings must be made current. | |
1141 | * | |
1142 | * Note that in the Linux USB subsystem, bandwidth associated with | |
1143 | * an endpoint in a given alternate setting is not reserved until an URB | |
1144 | * is submitted that needs that bandwidth. Some other operating systems | |
1145 | * allocate bandwidth early, when a configuration is chosen. | |
1146 | * | |
1147 | * This call is synchronous, and may not be used in an interrupt context. | |
1148 | * Also, drivers must not change altsettings while urbs are scheduled for | |
1149 | * endpoints in that interface; all such urbs must first be completed | |
1150 | * (perhaps forced by unlinking). | |
1151 | * | |
1152 | * Returns zero on success, or else the status code returned by the | |
1153 | * underlying usb_control_msg() call. | |
1154 | */ | |
1155 | int usb_set_interface(struct usb_device *dev, int interface, int alternate) | |
1156 | { | |
1157 | struct usb_interface *iface; | |
1158 | struct usb_host_interface *alt; | |
1159 | int ret; | |
1160 | int manual = 0; | |
1161 | ||
1162 | if (dev->state == USB_STATE_SUSPENDED) | |
1163 | return -EHOSTUNREACH; | |
1164 | ||
1165 | iface = usb_ifnum_to_if(dev, interface); | |
1166 | if (!iface) { | |
1167 | dev_dbg(&dev->dev, "selecting invalid interface %d\n", | |
1168 | interface); | |
1169 | return -EINVAL; | |
1170 | } | |
1171 | ||
1172 | alt = usb_altnum_to_altsetting(iface, alternate); | |
1173 | if (!alt) { | |
1174 | warn("selecting invalid altsetting %d", alternate); | |
1175 | return -EINVAL; | |
1176 | } | |
1177 | ||
1178 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
1179 | USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, | |
1180 | alternate, interface, NULL, 0, 5000); | |
1181 | ||
1182 | /* 9.4.10 says devices don't need this and are free to STALL the | |
1183 | * request if the interface only has one alternate setting. | |
1184 | */ | |
1185 | if (ret == -EPIPE && iface->num_altsetting == 1) { | |
1186 | dev_dbg(&dev->dev, | |
1187 | "manual set_interface for iface %d, alt %d\n", | |
1188 | interface, alternate); | |
1189 | manual = 1; | |
1190 | } else if (ret < 0) | |
1191 | return ret; | |
1192 | ||
1193 | /* FIXME drivers shouldn't need to replicate/bugfix the logic here | |
1194 | * when they implement async or easily-killable versions of this or | |
1195 | * other "should-be-internal" functions (like clear_halt). | |
1196 | * should hcd+usbcore postprocess control requests? | |
1197 | */ | |
1198 | ||
1199 | /* prevent submissions using previous endpoint settings */ | |
0e6c8e8d AS |
1200 | if (device_is_registered(&iface->dev)) |
1201 | usb_remove_sysfs_intf_files(iface); | |
1da177e4 LT |
1202 | usb_disable_interface(dev, iface); |
1203 | ||
1da177e4 LT |
1204 | iface->cur_altsetting = alt; |
1205 | ||
1206 | /* If the interface only has one altsetting and the device didn't | |
a81e7ecc | 1207 | * accept the request, we attempt to carry out the equivalent action |
1da177e4 LT |
1208 | * by manually clearing the HALT feature for each endpoint in the |
1209 | * new altsetting. | |
1210 | */ | |
1211 | if (manual) { | |
1212 | int i; | |
1213 | ||
1214 | for (i = 0; i < alt->desc.bNumEndpoints; i++) { | |
1215 | unsigned int epaddr = | |
1216 | alt->endpoint[i].desc.bEndpointAddress; | |
1217 | unsigned int pipe = | |
1218 | __create_pipe(dev, USB_ENDPOINT_NUMBER_MASK & epaddr) | |
1219 | | (usb_endpoint_out(epaddr) ? USB_DIR_OUT : USB_DIR_IN); | |
1220 | ||
1221 | usb_clear_halt(dev, pipe); | |
1222 | } | |
1223 | } | |
1224 | ||
1225 | /* 9.1.1.5: reset toggles for all endpoints in the new altsetting | |
1226 | * | |
1227 | * Note: | |
1228 | * Despite EP0 is always present in all interfaces/AS, the list of | |
1229 | * endpoints from the descriptor does not contain EP0. Due to its | |
1230 | * omnipresence one might expect EP0 being considered "affected" by | |
1231 | * any SetInterface request and hence assume toggles need to be reset. | |
1232 | * However, EP0 toggles are re-synced for every individual transfer | |
1233 | * during the SETUP stage - hence EP0 toggles are "don't care" here. | |
1234 | * (Likewise, EP0 never "halts" on well designed devices.) | |
1235 | */ | |
1236 | usb_enable_interface(dev, iface); | |
0e6c8e8d AS |
1237 | if (device_is_registered(&iface->dev)) |
1238 | usb_create_sysfs_intf_files(iface); | |
1da177e4 LT |
1239 | |
1240 | return 0; | |
1241 | } | |
1242 | ||
1243 | /** | |
1244 | * usb_reset_configuration - lightweight device reset | |
1245 | * @dev: the device whose configuration is being reset | |
1246 | * | |
1247 | * This issues a standard SET_CONFIGURATION request to the device using | |
1248 | * the current configuration. The effect is to reset most USB-related | |
1249 | * state in the device, including interface altsettings (reset to zero), | |
1250 | * endpoint halts (cleared), and data toggle (only for bulk and interrupt | |
1251 | * endpoints). Other usbcore state is unchanged, including bindings of | |
1252 | * usb device drivers to interfaces. | |
1253 | * | |
1254 | * Because this affects multiple interfaces, avoid using this with composite | |
1255 | * (multi-interface) devices. Instead, the driver for each interface may | |
a81e7ecc DB |
1256 | * use usb_set_interface() on the interfaces it claims. Be careful though; |
1257 | * some devices don't support the SET_INTERFACE request, and others won't | |
1258 | * reset all the interface state (notably data toggles). Resetting the whole | |
1da177e4 LT |
1259 | * configuration would affect other drivers' interfaces. |
1260 | * | |
1261 | * The caller must own the device lock. | |
1262 | * | |
1263 | * Returns zero on success, else a negative error code. | |
1264 | */ | |
1265 | int usb_reset_configuration(struct usb_device *dev) | |
1266 | { | |
1267 | int i, retval; | |
1268 | struct usb_host_config *config; | |
1269 | ||
1270 | if (dev->state == USB_STATE_SUSPENDED) | |
1271 | return -EHOSTUNREACH; | |
1272 | ||
1273 | /* caller must have locked the device and must own | |
1274 | * the usb bus readlock (so driver bindings are stable); | |
1275 | * calls during probe() are fine | |
1276 | */ | |
1277 | ||
1278 | for (i = 1; i < 16; ++i) { | |
1279 | usb_disable_endpoint(dev, i); | |
1280 | usb_disable_endpoint(dev, i + USB_DIR_IN); | |
1281 | } | |
1282 | ||
1283 | config = dev->actconfig; | |
1284 | retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
1285 | USB_REQ_SET_CONFIGURATION, 0, | |
1286 | config->desc.bConfigurationValue, 0, | |
1287 | NULL, 0, USB_CTRL_SET_TIMEOUT); | |
0e6c8e8d | 1288 | if (retval < 0) |
1da177e4 | 1289 | return retval; |
1da177e4 LT |
1290 | |
1291 | dev->toggle[0] = dev->toggle[1] = 0; | |
1292 | ||
1293 | /* re-init hc/hcd interface/endpoint state */ | |
1294 | for (i = 0; i < config->desc.bNumInterfaces; i++) { | |
1295 | struct usb_interface *intf = config->interface[i]; | |
1296 | struct usb_host_interface *alt; | |
1297 | ||
0e6c8e8d AS |
1298 | if (device_is_registered(&intf->dev)) |
1299 | usb_remove_sysfs_intf_files(intf); | |
1da177e4 LT |
1300 | alt = usb_altnum_to_altsetting(intf, 0); |
1301 | ||
1302 | /* No altsetting 0? We'll assume the first altsetting. | |
1303 | * We could use a GetInterface call, but if a device is | |
1304 | * so non-compliant that it doesn't have altsetting 0 | |
1305 | * then I wouldn't trust its reply anyway. | |
1306 | */ | |
1307 | if (!alt) | |
1308 | alt = &intf->altsetting[0]; | |
1309 | ||
1310 | intf->cur_altsetting = alt; | |
1311 | usb_enable_interface(dev, intf); | |
0e6c8e8d AS |
1312 | if (device_is_registered(&intf->dev)) |
1313 | usb_create_sysfs_intf_files(intf); | |
1da177e4 LT |
1314 | } |
1315 | return 0; | |
1316 | } | |
1317 | ||
9f8b17e6 | 1318 | void usb_release_interface(struct device *dev) |
1da177e4 LT |
1319 | { |
1320 | struct usb_interface *intf = to_usb_interface(dev); | |
1321 | struct usb_interface_cache *intfc = | |
1322 | altsetting_to_usb_interface_cache(intf->altsetting); | |
1323 | ||
1324 | kref_put(&intfc->ref, usb_release_interface_cache); | |
1325 | kfree(intf); | |
1326 | } | |
1327 | ||
9f8b17e6 KS |
1328 | #ifdef CONFIG_HOTPLUG |
1329 | static int usb_if_uevent(struct device *dev, char **envp, int num_envp, | |
1330 | char *buffer, int buffer_size) | |
1331 | { | |
1332 | struct usb_device *usb_dev; | |
1333 | struct usb_interface *intf; | |
1334 | struct usb_host_interface *alt; | |
1335 | int i = 0; | |
1336 | int length = 0; | |
1337 | ||
1338 | if (!dev) | |
1339 | return -ENODEV; | |
1340 | ||
1341 | /* driver is often null here; dev_dbg() would oops */ | |
1342 | pr_debug ("usb %s: uevent\n", dev->bus_id); | |
1343 | ||
1344 | intf = to_usb_interface(dev); | |
1345 | usb_dev = interface_to_usbdev(intf); | |
1346 | alt = intf->cur_altsetting; | |
1347 | ||
1348 | if (add_uevent_var(envp, num_envp, &i, | |
1349 | buffer, buffer_size, &length, | |
1350 | "INTERFACE=%d/%d/%d", | |
1351 | alt->desc.bInterfaceClass, | |
1352 | alt->desc.bInterfaceSubClass, | |
1353 | alt->desc.bInterfaceProtocol)) | |
1354 | return -ENOMEM; | |
1355 | ||
1356 | if (add_uevent_var(envp, num_envp, &i, | |
1357 | buffer, buffer_size, &length, | |
1358 | "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", | |
1359 | le16_to_cpu(usb_dev->descriptor.idVendor), | |
1360 | le16_to_cpu(usb_dev->descriptor.idProduct), | |
1361 | le16_to_cpu(usb_dev->descriptor.bcdDevice), | |
1362 | usb_dev->descriptor.bDeviceClass, | |
1363 | usb_dev->descriptor.bDeviceSubClass, | |
1364 | usb_dev->descriptor.bDeviceProtocol, | |
1365 | alt->desc.bInterfaceClass, | |
1366 | alt->desc.bInterfaceSubClass, | |
1367 | alt->desc.bInterfaceProtocol)) | |
1368 | return -ENOMEM; | |
1369 | ||
1370 | envp[i] = NULL; | |
1371 | return 0; | |
1372 | } | |
1373 | ||
1374 | #else | |
1375 | ||
1376 | static int usb_if_uevent(struct device *dev, char **envp, | |
1377 | int num_envp, char *buffer, int buffer_size) | |
1378 | { | |
1379 | return -ENODEV; | |
1380 | } | |
1381 | #endif /* CONFIG_HOTPLUG */ | |
1382 | ||
1383 | struct device_type usb_if_device_type = { | |
1384 | .name = "usb_interface", | |
1385 | .release = usb_release_interface, | |
1386 | .uevent = usb_if_uevent, | |
1387 | }; | |
1388 | ||
165fe97e CN |
1389 | static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev, |
1390 | struct usb_host_config *config, | |
1391 | u8 inum) | |
1392 | { | |
1393 | struct usb_interface_assoc_descriptor *retval = NULL; | |
1394 | struct usb_interface_assoc_descriptor *intf_assoc; | |
1395 | int first_intf; | |
1396 | int last_intf; | |
1397 | int i; | |
1398 | ||
1399 | for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) { | |
1400 | intf_assoc = config->intf_assoc[i]; | |
1401 | if (intf_assoc->bInterfaceCount == 0) | |
1402 | continue; | |
1403 | ||
1404 | first_intf = intf_assoc->bFirstInterface; | |
1405 | last_intf = first_intf + (intf_assoc->bInterfaceCount - 1); | |
1406 | if (inum >= first_intf && inum <= last_intf) { | |
1407 | if (!retval) | |
1408 | retval = intf_assoc; | |
1409 | else | |
1410 | dev_err(&dev->dev, "Interface #%d referenced" | |
1411 | " by multiple IADs\n", inum); | |
1412 | } | |
1413 | } | |
1414 | ||
1415 | return retval; | |
1416 | } | |
1417 | ||
1418 | ||
1da177e4 LT |
1419 | /* |
1420 | * usb_set_configuration - Makes a particular device setting be current | |
1421 | * @dev: the device whose configuration is being updated | |
1422 | * @configuration: the configuration being chosen. | |
1423 | * Context: !in_interrupt(), caller owns the device lock | |
1424 | * | |
1425 | * This is used to enable non-default device modes. Not all devices | |
1426 | * use this kind of configurability; many devices only have one | |
1427 | * configuration. | |
1428 | * | |
3f141e2a AS |
1429 | * @configuration is the value of the configuration to be installed. |
1430 | * According to the USB spec (e.g. section 9.1.1.5), configuration values | |
1431 | * must be non-zero; a value of zero indicates that the device in | |
1432 | * unconfigured. However some devices erroneously use 0 as one of their | |
1433 | * configuration values. To help manage such devices, this routine will | |
1434 | * accept @configuration = -1 as indicating the device should be put in | |
1435 | * an unconfigured state. | |
1436 | * | |
1da177e4 LT |
1437 | * USB device configurations may affect Linux interoperability, |
1438 | * power consumption and the functionality available. For example, | |
1439 | * the default configuration is limited to using 100mA of bus power, | |
1440 | * so that when certain device functionality requires more power, | |
1441 | * and the device is bus powered, that functionality should be in some | |
1442 | * non-default device configuration. Other device modes may also be | |
1443 | * reflected as configuration options, such as whether two ISDN | |
1444 | * channels are available independently; and choosing between open | |
1445 | * standard device protocols (like CDC) or proprietary ones. | |
1446 | * | |
1447 | * Note that USB has an additional level of device configurability, | |
1448 | * associated with interfaces. That configurability is accessed using | |
1449 | * usb_set_interface(). | |
1450 | * | |
1451 | * This call is synchronous. The calling context must be able to sleep, | |
1452 | * must own the device lock, and must not hold the driver model's USB | |
341487a8 | 1453 | * bus mutex; usb device driver probe() methods cannot use this routine. |
1da177e4 LT |
1454 | * |
1455 | * Returns zero on success, or else the status code returned by the | |
093cf723 | 1456 | * underlying call that failed. On successful completion, each interface |
1da177e4 LT |
1457 | * in the original device configuration has been destroyed, and each one |
1458 | * in the new configuration has been probed by all relevant usb device | |
1459 | * drivers currently known to the kernel. | |
1460 | */ | |
1461 | int usb_set_configuration(struct usb_device *dev, int configuration) | |
1462 | { | |
1463 | int i, ret; | |
1464 | struct usb_host_config *cp = NULL; | |
1465 | struct usb_interface **new_interfaces = NULL; | |
1466 | int n, nintf; | |
1467 | ||
3f141e2a AS |
1468 | if (configuration == -1) |
1469 | configuration = 0; | |
1470 | else { | |
1471 | for (i = 0; i < dev->descriptor.bNumConfigurations; i++) { | |
1472 | if (dev->config[i].desc.bConfigurationValue == | |
1473 | configuration) { | |
1474 | cp = &dev->config[i]; | |
1475 | break; | |
1476 | } | |
1da177e4 LT |
1477 | } |
1478 | } | |
1479 | if ((!cp && configuration != 0)) | |
1480 | return -EINVAL; | |
1481 | ||
1482 | /* The USB spec says configuration 0 means unconfigured. | |
1483 | * But if a device includes a configuration numbered 0, | |
1484 | * we will accept it as a correctly configured state. | |
3f141e2a | 1485 | * Use -1 if you really want to unconfigure the device. |
1da177e4 LT |
1486 | */ |
1487 | if (cp && configuration == 0) | |
1488 | dev_warn(&dev->dev, "config 0 descriptor??\n"); | |
1489 | ||
1da177e4 LT |
1490 | /* Allocate memory for new interfaces before doing anything else, |
1491 | * so that if we run out then nothing will have changed. */ | |
1492 | n = nintf = 0; | |
1493 | if (cp) { | |
1494 | nintf = cp->desc.bNumInterfaces; | |
1495 | new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), | |
1496 | GFP_KERNEL); | |
1497 | if (!new_interfaces) { | |
1498 | dev_err(&dev->dev, "Out of memory"); | |
1499 | return -ENOMEM; | |
1500 | } | |
1501 | ||
1502 | for (; n < nintf; ++n) { | |
0a1ef3b5 | 1503 | new_interfaces[n] = kzalloc( |
1da177e4 LT |
1504 | sizeof(struct usb_interface), |
1505 | GFP_KERNEL); | |
1506 | if (!new_interfaces[n]) { | |
1507 | dev_err(&dev->dev, "Out of memory"); | |
1508 | ret = -ENOMEM; | |
1509 | free_interfaces: | |
1510 | while (--n >= 0) | |
1511 | kfree(new_interfaces[n]); | |
1512 | kfree(new_interfaces); | |
1513 | return ret; | |
1514 | } | |
1515 | } | |
1da177e4 | 1516 | |
f48219db HS |
1517 | i = dev->bus_mA - cp->desc.bMaxPower * 2; |
1518 | if (i < 0) | |
1519 | dev_warn(&dev->dev, "new config #%d exceeds power " | |
1520 | "limit by %dmA\n", | |
1521 | configuration, -i); | |
1522 | } | |
55c52718 | 1523 | |
01d883d4 | 1524 | /* Wake up the device so we can send it the Set-Config request */ |
94fcda1f | 1525 | ret = usb_autoresume_device(dev); |
01d883d4 AS |
1526 | if (ret) |
1527 | goto free_interfaces; | |
1528 | ||
6ad07129 AS |
1529 | /* if it's already configured, clear out old state first. |
1530 | * getting rid of old interfaces means unbinding their drivers. | |
1531 | */ | |
1532 | if (dev->state != USB_STATE_ADDRESS) | |
1533 | usb_disable_device (dev, 1); // Skip ep0 | |
1534 | ||
1da177e4 LT |
1535 | if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
1536 | USB_REQ_SET_CONFIGURATION, 0, configuration, 0, | |
6ad07129 AS |
1537 | NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) { |
1538 | ||
1539 | /* All the old state is gone, so what else can we do? | |
1540 | * The device is probably useless now anyway. | |
1541 | */ | |
1542 | cp = NULL; | |
1543 | } | |
1da177e4 LT |
1544 | |
1545 | dev->actconfig = cp; | |
6ad07129 | 1546 | if (!cp) { |
1da177e4 | 1547 | usb_set_device_state(dev, USB_STATE_ADDRESS); |
94fcda1f | 1548 | usb_autosuspend_device(dev); |
6ad07129 AS |
1549 | goto free_interfaces; |
1550 | } | |
1551 | usb_set_device_state(dev, USB_STATE_CONFIGURED); | |
1da177e4 | 1552 | |
6ad07129 AS |
1553 | /* Initialize the new interface structures and the |
1554 | * hc/hcd/usbcore interface/endpoint state. | |
1555 | */ | |
1556 | for (i = 0; i < nintf; ++i) { | |
1557 | struct usb_interface_cache *intfc; | |
1558 | struct usb_interface *intf; | |
1559 | struct usb_host_interface *alt; | |
1da177e4 | 1560 | |
6ad07129 AS |
1561 | cp->interface[i] = intf = new_interfaces[i]; |
1562 | intfc = cp->intf_cache[i]; | |
1563 | intf->altsetting = intfc->altsetting; | |
1564 | intf->num_altsetting = intfc->num_altsetting; | |
165fe97e | 1565 | intf->intf_assoc = find_iad(dev, cp, i); |
6ad07129 | 1566 | kref_get(&intfc->ref); |
1da177e4 | 1567 | |
6ad07129 AS |
1568 | alt = usb_altnum_to_altsetting(intf, 0); |
1569 | ||
1570 | /* No altsetting 0? We'll assume the first altsetting. | |
1571 | * We could use a GetInterface call, but if a device is | |
1572 | * so non-compliant that it doesn't have altsetting 0 | |
1573 | * then I wouldn't trust its reply anyway. | |
1da177e4 | 1574 | */ |
6ad07129 AS |
1575 | if (!alt) |
1576 | alt = &intf->altsetting[0]; | |
1577 | ||
1578 | intf->cur_altsetting = alt; | |
1579 | usb_enable_interface(dev, intf); | |
1580 | intf->dev.parent = &dev->dev; | |
1581 | intf->dev.driver = NULL; | |
1582 | intf->dev.bus = &usb_bus_type; | |
9f8b17e6 | 1583 | intf->dev.type = &usb_if_device_type; |
6ad07129 | 1584 | intf->dev.dma_mask = dev->dev.dma_mask; |
6ad07129 AS |
1585 | device_initialize (&intf->dev); |
1586 | mark_quiesced(intf); | |
1587 | sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", | |
1588 | dev->bus->busnum, dev->devpath, | |
1589 | configuration, alt->desc.bInterfaceNumber); | |
1590 | } | |
1591 | kfree(new_interfaces); | |
1592 | ||
1593 | if (cp->string == NULL) | |
1594 | cp->string = usb_cache_string(dev, cp->desc.iConfiguration); | |
1595 | ||
1596 | /* Now that all the interfaces are set up, register them | |
1597 | * to trigger binding of drivers to interfaces. probe() | |
1598 | * routines may install different altsettings and may | |
1599 | * claim() any interfaces not yet bound. Many class drivers | |
1600 | * need that: CDC, audio, video, etc. | |
1601 | */ | |
1602 | for (i = 0; i < nintf; ++i) { | |
1603 | struct usb_interface *intf = cp->interface[i]; | |
1604 | ||
1605 | dev_dbg (&dev->dev, | |
1606 | "adding %s (config #%d, interface %d)\n", | |
1607 | intf->dev.bus_id, configuration, | |
1608 | intf->cur_altsetting->desc.bInterfaceNumber); | |
1609 | ret = device_add (&intf->dev); | |
1610 | if (ret != 0) { | |
1611 | dev_err(&dev->dev, "device_add(%s) --> %d\n", | |
1612 | intf->dev.bus_id, ret); | |
1613 | continue; | |
1da177e4 | 1614 | } |
6ad07129 | 1615 | usb_create_sysfs_intf_files (intf); |
1da177e4 LT |
1616 | } |
1617 | ||
94fcda1f | 1618 | usb_autosuspend_device(dev); |
86d30741 | 1619 | return 0; |
1da177e4 LT |
1620 | } |
1621 | ||
088dc270 AS |
1622 | struct set_config_request { |
1623 | struct usb_device *udev; | |
1624 | int config; | |
1625 | struct work_struct work; | |
1626 | }; | |
1627 | ||
1628 | /* Worker routine for usb_driver_set_configuration() */ | |
c4028958 | 1629 | static void driver_set_config_work(struct work_struct *work) |
088dc270 | 1630 | { |
c4028958 DH |
1631 | struct set_config_request *req = |
1632 | container_of(work, struct set_config_request, work); | |
088dc270 AS |
1633 | |
1634 | usb_lock_device(req->udev); | |
1635 | usb_set_configuration(req->udev, req->config); | |
1636 | usb_unlock_device(req->udev); | |
1637 | usb_put_dev(req->udev); | |
1638 | kfree(req); | |
1639 | } | |
1640 | ||
1641 | /** | |
1642 | * usb_driver_set_configuration - Provide a way for drivers to change device configurations | |
1643 | * @udev: the device whose configuration is being updated | |
1644 | * @config: the configuration being chosen. | |
1645 | * Context: In process context, must be able to sleep | |
1646 | * | |
1647 | * Device interface drivers are not allowed to change device configurations. | |
1648 | * This is because changing configurations will destroy the interface the | |
1649 | * driver is bound to and create new ones; it would be like a floppy-disk | |
1650 | * driver telling the computer to replace the floppy-disk drive with a | |
1651 | * tape drive! | |
1652 | * | |
1653 | * Still, in certain specialized circumstances the need may arise. This | |
1654 | * routine gets around the normal restrictions by using a work thread to | |
1655 | * submit the change-config request. | |
1656 | * | |
1657 | * Returns 0 if the request was succesfully queued, error code otherwise. | |
1658 | * The caller has no way to know whether the queued request will eventually | |
1659 | * succeed. | |
1660 | */ | |
1661 | int usb_driver_set_configuration(struct usb_device *udev, int config) | |
1662 | { | |
1663 | struct set_config_request *req; | |
1664 | ||
1665 | req = kmalloc(sizeof(*req), GFP_KERNEL); | |
1666 | if (!req) | |
1667 | return -ENOMEM; | |
1668 | req->udev = udev; | |
1669 | req->config = config; | |
c4028958 | 1670 | INIT_WORK(&req->work, driver_set_config_work); |
088dc270 AS |
1671 | |
1672 | usb_get_dev(udev); | |
1737bf2c | 1673 | schedule_work(&req->work); |
088dc270 AS |
1674 | return 0; |
1675 | } | |
1676 | EXPORT_SYMBOL_GPL(usb_driver_set_configuration); | |
1677 | ||
1da177e4 LT |
1678 | // synchronous request completion model |
1679 | EXPORT_SYMBOL(usb_control_msg); | |
1680 | EXPORT_SYMBOL(usb_bulk_msg); | |
1681 | ||
1682 | EXPORT_SYMBOL(usb_sg_init); | |
1683 | EXPORT_SYMBOL(usb_sg_cancel); | |
1684 | EXPORT_SYMBOL(usb_sg_wait); | |
1685 | ||
1686 | // synchronous control message convenience routines | |
1687 | EXPORT_SYMBOL(usb_get_descriptor); | |
1688 | EXPORT_SYMBOL(usb_get_status); | |
1da177e4 LT |
1689 | EXPORT_SYMBOL(usb_string); |
1690 | ||
1691 | // synchronous calls that also maintain usbcore state | |
1692 | EXPORT_SYMBOL(usb_clear_halt); | |
1693 | EXPORT_SYMBOL(usb_reset_configuration); | |
1694 | EXPORT_SYMBOL(usb_set_interface); | |
1695 |