]>
Commit | Line | Data |
---|---|---|
7359d482 PZ |
1 | /* |
2 | * hcd.c - DesignWare HS OTG Controller host-mode routines | |
3 | * | |
4 | * Copyright (C) 2004-2013 Synopsys, Inc. | |
5 | * | |
6 | * Redistribution and use in source and binary forms, with or without | |
7 | * modification, are permitted provided that the following conditions | |
8 | * are met: | |
9 | * 1. Redistributions of source code must retain the above copyright | |
10 | * notice, this list of conditions, and the following disclaimer, | |
11 | * without modification. | |
12 | * 2. Redistributions in binary form must reproduce the above copyright | |
13 | * notice, this list of conditions and the following disclaimer in the | |
14 | * documentation and/or other materials provided with the distribution. | |
15 | * 3. The names of the above-listed copyright holders may not be used | |
16 | * to endorse or promote products derived from this software without | |
17 | * specific prior written permission. | |
18 | * | |
19 | * ALTERNATIVELY, this software may be distributed under the terms of the | |
20 | * GNU General Public License ("GPL") as published by the Free Software | |
21 | * Foundation; either version 2 of the License, or (at your option) any | |
22 | * later version. | |
23 | * | |
24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
25 | * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
26 | * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
27 | * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
28 | * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
29 | * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
30 | * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
31 | * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
32 | * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
33 | * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
34 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
35 | */ | |
36 | ||
37 | /* | |
38 | * This file contains the core HCD code, and implements the Linux hc_driver | |
39 | * API | |
40 | */ | |
41 | #include <linux/kernel.h> | |
42 | #include <linux/module.h> | |
43 | #include <linux/spinlock.h> | |
44 | #include <linux/interrupt.h> | |
45 | #include <linux/dma-mapping.h> | |
46 | #include <linux/delay.h> | |
47 | #include <linux/io.h> | |
48 | #include <linux/slab.h> | |
49 | #include <linux/usb.h> | |
50 | ||
51 | #include <linux/usb/hcd.h> | |
52 | #include <linux/usb/ch11.h> | |
53 | ||
54 | #include "core.h" | |
55 | #include "hcd.h" | |
56 | ||
57 | /** | |
58 | * dwc2_dump_channel_info() - Prints the state of a host channel | |
59 | * | |
60 | * @hsotg: Programming view of DWC_otg controller | |
61 | * @chan: Pointer to the channel to dump | |
62 | * | |
63 | * Must be called with interrupt disabled and spinlock held | |
64 | * | |
65 | * NOTE: This function will be removed once the peripheral controller code | |
66 | * is integrated and the driver is stable | |
67 | */ | |
68 | static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, | |
69 | struct dwc2_host_chan *chan) | |
70 | { | |
71 | #ifdef VERBOSE_DEBUG | |
72 | int num_channels = hsotg->core_params->host_channels; | |
73 | struct dwc2_qh *qh; | |
74 | u32 hcchar; | |
75 | u32 hcsplt; | |
76 | u32 hctsiz; | |
77 | u32 hc_dma; | |
78 | int i; | |
79 | ||
80 | if (chan == NULL) | |
81 | return; | |
82 | ||
83 | hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); | |
84 | hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); | |
85 | hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num)); | |
86 | hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num)); | |
87 | ||
88 | dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); | |
89 | dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", | |
90 | hcchar, hcsplt); | |
91 | dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", | |
92 | hctsiz, hc_dma); | |
93 | dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", | |
94 | chan->dev_addr, chan->ep_num, chan->ep_is_in); | |
95 | dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); | |
96 | dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); | |
97 | dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); | |
98 | dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); | |
99 | dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); | |
100 | dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); | |
101 | dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", | |
102 | (unsigned long)chan->xfer_dma); | |
103 | dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); | |
104 | dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); | |
105 | dev_dbg(hsotg->dev, " NP inactive sched:\n"); | |
106 | list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, | |
107 | qh_list_entry) | |
108 | dev_dbg(hsotg->dev, " %p\n", qh); | |
109 | dev_dbg(hsotg->dev, " NP active sched:\n"); | |
110 | list_for_each_entry(qh, &hsotg->non_periodic_sched_active, | |
111 | qh_list_entry) | |
112 | dev_dbg(hsotg->dev, " %p\n", qh); | |
113 | dev_dbg(hsotg->dev, " Channels:\n"); | |
114 | for (i = 0; i < num_channels; i++) { | |
115 | struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; | |
116 | ||
117 | dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); | |
118 | } | |
119 | #endif /* VERBOSE_DEBUG */ | |
120 | } | |
121 | ||
122 | /* | |
123 | * Processes all the URBs in a single list of QHs. Completes them with | |
124 | * -ETIMEDOUT and frees the QTD. | |
125 | * | |
126 | * Must be called with interrupt disabled and spinlock held | |
127 | */ | |
128 | static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, | |
129 | struct list_head *qh_list) | |
130 | { | |
131 | struct dwc2_qh *qh, *qh_tmp; | |
132 | struct dwc2_qtd *qtd, *qtd_tmp; | |
133 | ||
134 | list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { | |
135 | list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, | |
136 | qtd_list_entry) { | |
0d012b98 PZ |
137 | dwc2_host_complete(hsotg, qtd, -ETIMEDOUT); |
138 | dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); | |
7359d482 PZ |
139 | } |
140 | } | |
141 | } | |
142 | ||
143 | static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, | |
144 | struct list_head *qh_list) | |
145 | { | |
146 | struct dwc2_qtd *qtd, *qtd_tmp; | |
147 | struct dwc2_qh *qh, *qh_tmp; | |
148 | unsigned long flags; | |
149 | ||
150 | if (!qh_list->next) | |
151 | /* The list hasn't been initialized yet */ | |
152 | return; | |
153 | ||
154 | spin_lock_irqsave(&hsotg->lock, flags); | |
155 | ||
156 | /* Ensure there are no QTDs or URBs left */ | |
157 | dwc2_kill_urbs_in_qh_list(hsotg, qh_list); | |
158 | ||
159 | list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { | |
160 | dwc2_hcd_qh_unlink(hsotg, qh); | |
161 | ||
162 | /* Free each QTD in the QH's QTD list */ | |
163 | list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, | |
164 | qtd_list_entry) | |
165 | dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); | |
166 | ||
167 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
168 | dwc2_hcd_qh_free(hsotg, qh); | |
169 | spin_lock_irqsave(&hsotg->lock, flags); | |
170 | } | |
171 | ||
172 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
173 | } | |
174 | ||
175 | /* | |
176 | * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic | |
177 | * and periodic schedules. The QTD associated with each URB is removed from | |
178 | * the schedule and freed. This function may be called when a disconnect is | |
179 | * detected or when the HCD is being stopped. | |
180 | * | |
181 | * Must be called with interrupt disabled and spinlock held | |
182 | */ | |
183 | static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) | |
184 | { | |
185 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); | |
186 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); | |
187 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); | |
188 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); | |
189 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); | |
190 | dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); | |
191 | } | |
192 | ||
193 | /** | |
194 | * dwc2_hcd_start() - Starts the HCD when switching to Host mode | |
195 | * | |
196 | * @hsotg: Pointer to struct dwc2_hsotg | |
197 | */ | |
198 | void dwc2_hcd_start(struct dwc2_hsotg *hsotg) | |
199 | { | |
200 | u32 hprt0; | |
201 | ||
202 | if (hsotg->op_state == OTG_STATE_B_HOST) { | |
203 | /* | |
204 | * Reset the port. During a HNP mode switch the reset | |
205 | * needs to occur within 1ms and have a duration of at | |
206 | * least 50ms. | |
207 | */ | |
208 | hprt0 = dwc2_read_hprt0(hsotg); | |
209 | hprt0 |= HPRT0_RST; | |
210 | writel(hprt0, hsotg->regs + HPRT0); | |
211 | } | |
212 | ||
213 | queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, | |
214 | msecs_to_jiffies(50)); | |
215 | } | |
216 | ||
217 | /* Must be called with interrupt disabled and spinlock held */ | |
218 | static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) | |
219 | { | |
220 | int num_channels = hsotg->core_params->host_channels; | |
221 | struct dwc2_host_chan *channel; | |
222 | u32 hcchar; | |
223 | int i; | |
224 | ||
225 | if (hsotg->core_params->dma_enable <= 0) { | |
226 | /* Flush out any channel requests in slave mode */ | |
227 | for (i = 0; i < num_channels; i++) { | |
228 | channel = hsotg->hc_ptr_array[i]; | |
229 | if (!list_empty(&channel->hc_list_entry)) | |
230 | continue; | |
231 | hcchar = readl(hsotg->regs + HCCHAR(i)); | |
232 | if (hcchar & HCCHAR_CHENA) { | |
233 | hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); | |
234 | hcchar |= HCCHAR_CHDIS; | |
235 | writel(hcchar, hsotg->regs + HCCHAR(i)); | |
236 | } | |
237 | } | |
238 | } | |
239 | ||
240 | for (i = 0; i < num_channels; i++) { | |
241 | channel = hsotg->hc_ptr_array[i]; | |
242 | if (!list_empty(&channel->hc_list_entry)) | |
243 | continue; | |
244 | hcchar = readl(hsotg->regs + HCCHAR(i)); | |
245 | if (hcchar & HCCHAR_CHENA) { | |
246 | /* Halt the channel */ | |
247 | hcchar |= HCCHAR_CHDIS; | |
248 | writel(hcchar, hsotg->regs + HCCHAR(i)); | |
249 | } | |
250 | ||
251 | dwc2_hc_cleanup(hsotg, channel); | |
252 | list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); | |
253 | /* | |
254 | * Added for Descriptor DMA to prevent channel double cleanup in | |
255 | * release_channel_ddma(), which is called from ep_disable when | |
256 | * device disconnects | |
257 | */ | |
258 | channel->qh = NULL; | |
259 | } | |
260 | } | |
261 | ||
262 | /** | |
263 | * dwc2_hcd_disconnect() - Handles disconnect of the HCD | |
264 | * | |
265 | * @hsotg: Pointer to struct dwc2_hsotg | |
266 | * | |
267 | * Must be called with interrupt disabled and spinlock held | |
268 | */ | |
269 | void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) | |
270 | { | |
271 | u32 intr; | |
272 | ||
273 | /* Set status flags for the hub driver */ | |
274 | hsotg->flags.b.port_connect_status_change = 1; | |
275 | hsotg->flags.b.port_connect_status = 0; | |
276 | ||
277 | /* | |
278 | * Shutdown any transfers in process by clearing the Tx FIFO Empty | |
279 | * interrupt mask and status bits and disabling subsequent host | |
280 | * channel interrupts. | |
281 | */ | |
282 | intr = readl(hsotg->regs + GINTMSK); | |
283 | intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); | |
284 | writel(intr, hsotg->regs + GINTMSK); | |
285 | intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; | |
286 | writel(intr, hsotg->regs + GINTSTS); | |
287 | ||
288 | /* | |
289 | * Turn off the vbus power only if the core has transitioned to device | |
290 | * mode. If still in host mode, need to keep power on to detect a | |
291 | * reconnection. | |
292 | */ | |
293 | if (dwc2_is_device_mode(hsotg)) { | |
294 | if (hsotg->op_state != OTG_STATE_A_SUSPEND) { | |
295 | dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); | |
296 | writel(0, hsotg->regs + HPRT0); | |
297 | } | |
298 | ||
299 | dwc2_disable_host_interrupts(hsotg); | |
300 | } | |
301 | ||
302 | /* Respond with an error status to all URBs in the schedule */ | |
303 | dwc2_kill_all_urbs(hsotg); | |
304 | ||
305 | if (dwc2_is_host_mode(hsotg)) | |
306 | /* Clean up any host channels that were in use */ | |
307 | dwc2_hcd_cleanup_channels(hsotg); | |
308 | ||
309 | dwc2_host_disconnect(hsotg); | |
310 | } | |
311 | ||
312 | /** | |
313 | * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup | |
314 | * | |
315 | * @hsotg: Pointer to struct dwc2_hsotg | |
316 | */ | |
317 | static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) | |
318 | { | |
b46146d5 | 319 | if (hsotg->lx_state == DWC2_L2) { |
7359d482 | 320 | hsotg->flags.b.port_suspend_change = 1; |
b46146d5 GH |
321 | usb_hcd_resume_root_hub(hsotg->priv); |
322 | } else { | |
7359d482 | 323 | hsotg->flags.b.port_l1_change = 1; |
b46146d5 | 324 | } |
7359d482 PZ |
325 | } |
326 | ||
327 | /** | |
328 | * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner | |
329 | * | |
330 | * @hsotg: Pointer to struct dwc2_hsotg | |
331 | * | |
332 | * Must be called with interrupt disabled and spinlock held | |
333 | */ | |
334 | void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) | |
335 | { | |
336 | dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); | |
337 | ||
338 | /* | |
339 | * The root hub should be disconnected before this function is called. | |
340 | * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) | |
341 | * and the QH lists (via ..._hcd_endpoint_disable). | |
342 | */ | |
343 | ||
344 | /* Turn off all host-specific interrupts */ | |
345 | dwc2_disable_host_interrupts(hsotg); | |
346 | ||
347 | /* Turn off the vbus power */ | |
348 | dev_dbg(hsotg->dev, "PortPower off\n"); | |
349 | writel(0, hsotg->regs + HPRT0); | |
350 | } | |
351 | ||
352 | static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, | |
353 | struct dwc2_hcd_urb *urb, void **ep_handle, | |
354 | gfp_t mem_flags) | |
355 | { | |
356 | struct dwc2_qtd *qtd; | |
357 | unsigned long flags; | |
358 | u32 intr_mask; | |
359 | int retval; | |
9f8144c6 | 360 | int dev_speed; |
7359d482 PZ |
361 | |
362 | if (!hsotg->flags.b.port_connect_status) { | |
363 | /* No longer connected */ | |
364 | dev_err(hsotg->dev, "Not connected\n"); | |
365 | return -ENODEV; | |
366 | } | |
367 | ||
9f8144c6 NH |
368 | dev_speed = dwc2_host_get_speed(hsotg, urb->priv); |
369 | ||
370 | /* Some configurations cannot support LS traffic on a FS root port */ | |
371 | if ((dev_speed == USB_SPEED_LOW) && | |
372 | (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && | |
373 | (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { | |
374 | u32 hprt0 = readl(hsotg->regs + HPRT0); | |
375 | u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; | |
376 | ||
377 | if (prtspd == HPRT0_SPD_FULL_SPEED) | |
378 | return -ENODEV; | |
379 | } | |
380 | ||
7359d482 PZ |
381 | qtd = kzalloc(sizeof(*qtd), mem_flags); |
382 | if (!qtd) | |
383 | return -ENOMEM; | |
384 | ||
385 | dwc2_hcd_qtd_init(qtd, urb); | |
386 | retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle, | |
387 | mem_flags); | |
9bda1aac | 388 | if (retval) { |
7359d482 PZ |
389 | dev_err(hsotg->dev, |
390 | "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", | |
391 | retval); | |
392 | kfree(qtd); | |
393 | return retval; | |
394 | } | |
395 | ||
396 | intr_mask = readl(hsotg->regs + GINTMSK); | |
9bda1aac | 397 | if (!(intr_mask & GINTSTS_SOF)) { |
7359d482 PZ |
398 | enum dwc2_transaction_type tr_type; |
399 | ||
400 | if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && | |
401 | !(qtd->urb->flags & URB_GIVEBACK_ASAP)) | |
402 | /* | |
403 | * Do not schedule SG transactions until qtd has | |
404 | * URB_GIVEBACK_ASAP set | |
405 | */ | |
406 | return 0; | |
407 | ||
408 | spin_lock_irqsave(&hsotg->lock, flags); | |
409 | tr_type = dwc2_hcd_select_transactions(hsotg); | |
410 | if (tr_type != DWC2_TRANSACTION_NONE) | |
411 | dwc2_hcd_queue_transactions(hsotg, tr_type); | |
412 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
413 | } | |
414 | ||
9bda1aac | 415 | return 0; |
7359d482 PZ |
416 | } |
417 | ||
418 | /* Must be called with interrupt disabled and spinlock held */ | |
419 | static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, | |
420 | struct dwc2_hcd_urb *urb) | |
421 | { | |
422 | struct dwc2_qh *qh; | |
423 | struct dwc2_qtd *urb_qtd; | |
424 | ||
425 | urb_qtd = urb->qtd; | |
426 | if (!urb_qtd) { | |
427 | dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); | |
428 | return -EINVAL; | |
429 | } | |
430 | ||
431 | qh = urb_qtd->qh; | |
432 | if (!qh) { | |
433 | dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); | |
434 | return -EINVAL; | |
435 | } | |
436 | ||
0d012b98 PZ |
437 | urb->priv = NULL; |
438 | ||
7359d482 PZ |
439 | if (urb_qtd->in_process && qh->channel) { |
440 | dwc2_dump_channel_info(hsotg, qh->channel); | |
441 | ||
442 | /* The QTD is in process (it has been assigned to a channel) */ | |
443 | if (hsotg->flags.b.port_connect_status) | |
444 | /* | |
445 | * If still connected (i.e. in host mode), halt the | |
446 | * channel so it can be used for other transfers. If | |
447 | * no longer connected, the host registers can't be | |
448 | * written to halt the channel since the core is in | |
449 | * device mode. | |
450 | */ | |
451 | dwc2_hc_halt(hsotg, qh->channel, | |
452 | DWC2_HC_XFER_URB_DEQUEUE); | |
453 | } | |
454 | ||
455 | /* | |
456 | * Free the QTD and clean up the associated QH. Leave the QH in the | |
457 | * schedule if it has any remaining QTDs. | |
458 | */ | |
459 | if (hsotg->core_params->dma_desc_enable <= 0) { | |
460 | u8 in_process = urb_qtd->in_process; | |
461 | ||
462 | dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); | |
463 | if (in_process) { | |
464 | dwc2_hcd_qh_deactivate(hsotg, qh, 0); | |
465 | qh->channel = NULL; | |
466 | } else if (list_empty(&qh->qtd_list)) { | |
467 | dwc2_hcd_qh_unlink(hsotg, qh); | |
468 | } | |
469 | } else { | |
470 | dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); | |
471 | } | |
472 | ||
473 | return 0; | |
474 | } | |
475 | ||
476 | /* Must NOT be called with interrupt disabled or spinlock held */ | |
477 | static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, | |
478 | struct usb_host_endpoint *ep, int retry) | |
479 | { | |
480 | struct dwc2_qtd *qtd, *qtd_tmp; | |
481 | struct dwc2_qh *qh; | |
482 | unsigned long flags; | |
483 | int rc; | |
484 | ||
485 | spin_lock_irqsave(&hsotg->lock, flags); | |
486 | ||
487 | qh = ep->hcpriv; | |
488 | if (!qh) { | |
489 | rc = -EINVAL; | |
490 | goto err; | |
491 | } | |
492 | ||
493 | while (!list_empty(&qh->qtd_list) && retry--) { | |
494 | if (retry == 0) { | |
495 | dev_err(hsotg->dev, | |
496 | "## timeout in dwc2_hcd_endpoint_disable() ##\n"); | |
497 | rc = -EBUSY; | |
498 | goto err; | |
499 | } | |
500 | ||
501 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
502 | usleep_range(20000, 40000); | |
503 | spin_lock_irqsave(&hsotg->lock, flags); | |
504 | qh = ep->hcpriv; | |
505 | if (!qh) { | |
506 | rc = -EINVAL; | |
507 | goto err; | |
508 | } | |
509 | } | |
510 | ||
511 | dwc2_hcd_qh_unlink(hsotg, qh); | |
512 | ||
513 | /* Free each QTD in the QH's QTD list */ | |
514 | list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) | |
515 | dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); | |
516 | ||
517 | ep->hcpriv = NULL; | |
518 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
519 | dwc2_hcd_qh_free(hsotg, qh); | |
520 | ||
521 | return 0; | |
522 | ||
523 | err: | |
524 | ep->hcpriv = NULL; | |
525 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
526 | ||
527 | return rc; | |
528 | } | |
529 | ||
530 | /* Must be called with interrupt disabled and spinlock held */ | |
531 | static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, | |
532 | struct usb_host_endpoint *ep) | |
533 | { | |
534 | struct dwc2_qh *qh = ep->hcpriv; | |
535 | ||
536 | if (!qh) | |
537 | return -EINVAL; | |
538 | ||
539 | qh->data_toggle = DWC2_HC_PID_DATA0; | |
540 | ||
541 | return 0; | |
542 | } | |
543 | ||
544 | /* | |
545 | * Initializes dynamic portions of the DWC_otg HCD state | |
546 | * | |
547 | * Must be called with interrupt disabled and spinlock held | |
548 | */ | |
549 | static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) | |
550 | { | |
551 | struct dwc2_host_chan *chan, *chan_tmp; | |
552 | int num_channels; | |
553 | int i; | |
554 | ||
555 | hsotg->flags.d32 = 0; | |
7359d482 | 556 | hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; |
20f2eb9c DC |
557 | |
558 | if (hsotg->core_params->uframe_sched > 0) { | |
559 | hsotg->available_host_channels = | |
560 | hsotg->core_params->host_channels; | |
561 | } else { | |
562 | hsotg->non_periodic_channels = 0; | |
563 | hsotg->periodic_channels = 0; | |
564 | } | |
7359d482 PZ |
565 | |
566 | /* | |
567 | * Put all channels in the free channel list and clean up channel | |
568 | * states | |
569 | */ | |
570 | list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, | |
571 | hc_list_entry) | |
572 | list_del_init(&chan->hc_list_entry); | |
573 | ||
574 | num_channels = hsotg->core_params->host_channels; | |
575 | for (i = 0; i < num_channels; i++) { | |
576 | chan = hsotg->hc_ptr_array[i]; | |
577 | list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); | |
578 | dwc2_hc_cleanup(hsotg, chan); | |
579 | } | |
580 | ||
581 | /* Initialize the DWC core for host mode operation */ | |
582 | dwc2_core_host_init(hsotg); | |
583 | } | |
584 | ||
585 | static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, | |
586 | struct dwc2_host_chan *chan, | |
587 | struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) | |
588 | { | |
589 | int hub_addr, hub_port; | |
590 | ||
591 | chan->do_split = 1; | |
592 | chan->xact_pos = qtd->isoc_split_pos; | |
593 | chan->complete_split = qtd->complete_split; | |
594 | dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); | |
595 | chan->hub_addr = (u8)hub_addr; | |
596 | chan->hub_port = (u8)hub_port; | |
597 | } | |
598 | ||
599 | static void *dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, | |
600 | struct dwc2_host_chan *chan, | |
601 | struct dwc2_qtd *qtd, void *bufptr) | |
602 | { | |
603 | struct dwc2_hcd_urb *urb = qtd->urb; | |
604 | struct dwc2_hcd_iso_packet_desc *frame_desc; | |
605 | ||
606 | switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { | |
607 | case USB_ENDPOINT_XFER_CONTROL: | |
608 | chan->ep_type = USB_ENDPOINT_XFER_CONTROL; | |
609 | ||
610 | switch (qtd->control_phase) { | |
611 | case DWC2_CONTROL_SETUP: | |
612 | dev_vdbg(hsotg->dev, " Control setup transaction\n"); | |
613 | chan->do_ping = 0; | |
614 | chan->ep_is_in = 0; | |
615 | chan->data_pid_start = DWC2_HC_PID_SETUP; | |
616 | if (hsotg->core_params->dma_enable > 0) | |
617 | chan->xfer_dma = urb->setup_dma; | |
618 | else | |
619 | chan->xfer_buf = urb->setup_packet; | |
620 | chan->xfer_len = 8; | |
621 | bufptr = NULL; | |
622 | break; | |
623 | ||
624 | case DWC2_CONTROL_DATA: | |
625 | dev_vdbg(hsotg->dev, " Control data transaction\n"); | |
626 | chan->data_pid_start = qtd->data_toggle; | |
627 | break; | |
628 | ||
629 | case DWC2_CONTROL_STATUS: | |
630 | /* | |
631 | * Direction is opposite of data direction or IN if no | |
632 | * data | |
633 | */ | |
634 | dev_vdbg(hsotg->dev, " Control status transaction\n"); | |
635 | if (urb->length == 0) | |
636 | chan->ep_is_in = 1; | |
637 | else | |
638 | chan->ep_is_in = | |
639 | dwc2_hcd_is_pipe_out(&urb->pipe_info); | |
640 | if (chan->ep_is_in) | |
641 | chan->do_ping = 0; | |
642 | chan->data_pid_start = DWC2_HC_PID_DATA1; | |
643 | chan->xfer_len = 0; | |
644 | if (hsotg->core_params->dma_enable > 0) | |
645 | chan->xfer_dma = hsotg->status_buf_dma; | |
646 | else | |
647 | chan->xfer_buf = hsotg->status_buf; | |
648 | bufptr = NULL; | |
649 | break; | |
650 | } | |
651 | break; | |
652 | ||
653 | case USB_ENDPOINT_XFER_BULK: | |
654 | chan->ep_type = USB_ENDPOINT_XFER_BULK; | |
655 | break; | |
656 | ||
657 | case USB_ENDPOINT_XFER_INT: | |
658 | chan->ep_type = USB_ENDPOINT_XFER_INT; | |
659 | break; | |
660 | ||
661 | case USB_ENDPOINT_XFER_ISOC: | |
662 | chan->ep_type = USB_ENDPOINT_XFER_ISOC; | |
663 | if (hsotg->core_params->dma_desc_enable > 0) | |
664 | break; | |
665 | ||
666 | frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; | |
667 | frame_desc->status = 0; | |
668 | ||
669 | if (hsotg->core_params->dma_enable > 0) { | |
670 | chan->xfer_dma = urb->dma; | |
671 | chan->xfer_dma += frame_desc->offset + | |
672 | qtd->isoc_split_offset; | |
673 | } else { | |
674 | chan->xfer_buf = urb->buf; | |
675 | chan->xfer_buf += frame_desc->offset + | |
676 | qtd->isoc_split_offset; | |
677 | } | |
678 | ||
679 | chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; | |
680 | ||
681 | /* For non-dword aligned buffers */ | |
682 | if (hsotg->core_params->dma_enable > 0 && | |
683 | (chan->xfer_dma & 0x3)) | |
684 | bufptr = (u8 *)urb->buf + frame_desc->offset + | |
685 | qtd->isoc_split_offset; | |
686 | else | |
687 | bufptr = NULL; | |
688 | ||
689 | if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { | |
690 | if (chan->xfer_len <= 188) | |
691 | chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; | |
692 | else | |
693 | chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; | |
694 | } | |
695 | break; | |
696 | } | |
697 | ||
698 | return bufptr; | |
699 | } | |
700 | ||
701 | static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, | |
5dce9555 PZ |
702 | struct dwc2_host_chan *chan, |
703 | struct dwc2_hcd_urb *urb, void *bufptr) | |
7359d482 PZ |
704 | { |
705 | u32 buf_size; | |
5dce9555 PZ |
706 | struct urb *usb_urb; |
707 | struct usb_hcd *hcd; | |
7359d482 PZ |
708 | |
709 | if (!qh->dw_align_buf) { | |
5dce9555 PZ |
710 | if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) |
711 | buf_size = hsotg->core_params->max_transfer_size; | |
712 | else | |
713 | /* 3072 = 3 max-size Isoc packets */ | |
714 | buf_size = 3072; | |
715 | ||
7359d482 PZ |
716 | qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size, |
717 | &qh->dw_align_buf_dma, | |
718 | GFP_ATOMIC); | |
719 | if (!qh->dw_align_buf) | |
720 | return -ENOMEM; | |
5dce9555 | 721 | qh->dw_align_buf_size = buf_size; |
7359d482 PZ |
722 | } |
723 | ||
5dce9555 PZ |
724 | if (chan->xfer_len) { |
725 | dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); | |
726 | usb_urb = urb->priv; | |
727 | ||
728 | if (usb_urb) { | |
729 | if (usb_urb->transfer_flags & | |
730 | (URB_SETUP_MAP_SINGLE | URB_DMA_MAP_SG | | |
731 | URB_DMA_MAP_PAGE | URB_DMA_MAP_SINGLE)) { | |
732 | hcd = dwc2_hsotg_to_hcd(hsotg); | |
733 | usb_hcd_unmap_urb_for_dma(hcd, usb_urb); | |
734 | } | |
735 | if (!chan->ep_is_in) | |
736 | memcpy(qh->dw_align_buf, bufptr, | |
737 | chan->xfer_len); | |
738 | } else { | |
739 | dev_warn(hsotg->dev, "no URB in dwc2_urb\n"); | |
740 | } | |
7359d482 PZ |
741 | } |
742 | ||
743 | chan->align_buf = qh->dw_align_buf_dma; | |
744 | return 0; | |
745 | } | |
746 | ||
747 | /** | |
748 | * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host | |
749 | * channel and initializes the host channel to perform the transactions. The | |
750 | * host channel is removed from the free list. | |
751 | * | |
752 | * @hsotg: The HCD state structure | |
753 | * @qh: Transactions from the first QTD for this QH are selected and assigned | |
754 | * to a free host channel | |
755 | */ | |
20f2eb9c | 756 | static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) |
7359d482 PZ |
757 | { |
758 | struct dwc2_host_chan *chan; | |
759 | struct dwc2_hcd_urb *urb; | |
760 | struct dwc2_qtd *qtd; | |
761 | void *bufptr = NULL; | |
762 | ||
b49977a6 MK |
763 | if (dbg_qh(qh)) |
764 | dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); | |
7359d482 PZ |
765 | |
766 | if (list_empty(&qh->qtd_list)) { | |
767 | dev_dbg(hsotg->dev, "No QTDs in QH list\n"); | |
20f2eb9c | 768 | return -ENOMEM; |
7359d482 PZ |
769 | } |
770 | ||
771 | if (list_empty(&hsotg->free_hc_list)) { | |
772 | dev_dbg(hsotg->dev, "No free channel to assign\n"); | |
20f2eb9c | 773 | return -ENOMEM; |
7359d482 PZ |
774 | } |
775 | ||
776 | chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, | |
777 | hc_list_entry); | |
778 | ||
20f2eb9c | 779 | /* Remove host channel from free list */ |
7359d482 PZ |
780 | list_del_init(&chan->hc_list_entry); |
781 | ||
782 | qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); | |
783 | urb = qtd->urb; | |
784 | qh->channel = chan; | |
785 | qtd->in_process = 1; | |
786 | ||
787 | /* | |
788 | * Use usb_pipedevice to determine device address. This address is | |
789 | * 0 before the SET_ADDRESS command and the correct address afterward. | |
790 | */ | |
791 | chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); | |
792 | chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); | |
793 | chan->speed = qh->dev_speed; | |
794 | chan->max_packet = dwc2_max_packet(qh->maxp); | |
795 | ||
796 | chan->xfer_started = 0; | |
797 | chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; | |
798 | chan->error_state = (qtd->error_count > 0); | |
799 | chan->halt_on_queue = 0; | |
800 | chan->halt_pending = 0; | |
801 | chan->requests = 0; | |
802 | ||
803 | /* | |
804 | * The following values may be modified in the transfer type section | |
805 | * below. The xfer_len value may be reduced when the transfer is | |
806 | * started to accommodate the max widths of the XferSize and PktCnt | |
807 | * fields in the HCTSIZn register. | |
808 | */ | |
809 | ||
810 | chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); | |
811 | if (chan->ep_is_in) | |
812 | chan->do_ping = 0; | |
813 | else | |
814 | chan->do_ping = qh->ping_state; | |
815 | ||
816 | chan->data_pid_start = qh->data_toggle; | |
817 | chan->multi_count = 1; | |
818 | ||
bb6c3422 RK |
819 | if (urb->actual_length > urb->length && |
820 | !dwc2_hcd_is_pipe_in(&urb->pipe_info)) | |
84181086 PZ |
821 | urb->actual_length = urb->length; |
822 | ||
7359d482 PZ |
823 | if (hsotg->core_params->dma_enable > 0) { |
824 | chan->xfer_dma = urb->dma + urb->actual_length; | |
825 | ||
826 | /* For non-dword aligned case */ | |
827 | if (hsotg->core_params->dma_desc_enable <= 0 && | |
828 | (chan->xfer_dma & 0x3)) | |
829 | bufptr = (u8 *)urb->buf + urb->actual_length; | |
830 | } else { | |
831 | chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; | |
832 | } | |
833 | ||
834 | chan->xfer_len = urb->length - urb->actual_length; | |
835 | chan->xfer_count = 0; | |
836 | ||
837 | /* Set the split attributes if required */ | |
838 | if (qh->do_split) | |
839 | dwc2_hc_init_split(hsotg, chan, qtd, urb); | |
840 | else | |
841 | chan->do_split = 0; | |
842 | ||
843 | /* Set the transfer attributes */ | |
844 | bufptr = dwc2_hc_init_xfer(hsotg, chan, qtd, bufptr); | |
845 | ||
846 | /* Non DWORD-aligned buffer case */ | |
847 | if (bufptr) { | |
848 | dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); | |
5dce9555 | 849 | if (dwc2_hc_setup_align_buf(hsotg, qh, chan, urb, bufptr)) { |
7359d482 PZ |
850 | dev_err(hsotg->dev, |
851 | "%s: Failed to allocate memory to handle non-dword aligned buffer\n", | |
852 | __func__); | |
853 | /* Add channel back to free list */ | |
854 | chan->align_buf = 0; | |
855 | chan->multi_count = 0; | |
856 | list_add_tail(&chan->hc_list_entry, | |
857 | &hsotg->free_hc_list); | |
858 | qtd->in_process = 0; | |
859 | qh->channel = NULL; | |
20f2eb9c | 860 | return -ENOMEM; |
7359d482 PZ |
861 | } |
862 | } else { | |
863 | chan->align_buf = 0; | |
864 | } | |
865 | ||
866 | if (chan->ep_type == USB_ENDPOINT_XFER_INT || | |
867 | chan->ep_type == USB_ENDPOINT_XFER_ISOC) | |
868 | /* | |
869 | * This value may be modified when the transfer is started | |
870 | * to reflect the actual transfer length | |
871 | */ | |
872 | chan->multi_count = dwc2_hb_mult(qh->maxp); | |
873 | ||
874 | if (hsotg->core_params->dma_desc_enable > 0) | |
875 | chan->desc_list_addr = qh->desc_list_dma; | |
876 | ||
877 | dwc2_hc_init(hsotg, chan); | |
878 | chan->qh = qh; | |
20f2eb9c DC |
879 | |
880 | return 0; | |
7359d482 PZ |
881 | } |
882 | ||
883 | /** | |
884 | * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer | |
885 | * schedule and assigns them to available host channels. Called from the HCD | |
886 | * interrupt handler functions. | |
887 | * | |
888 | * @hsotg: The HCD state structure | |
889 | * | |
890 | * Return: The types of new transactions that were assigned to host channels | |
891 | */ | |
892 | enum dwc2_transaction_type dwc2_hcd_select_transactions( | |
893 | struct dwc2_hsotg *hsotg) | |
894 | { | |
895 | enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; | |
896 | struct list_head *qh_ptr; | |
897 | struct dwc2_qh *qh; | |
898 | int num_channels; | |
899 | ||
900 | #ifdef DWC2_DEBUG_SOF | |
901 | dev_vdbg(hsotg->dev, " Select Transactions\n"); | |
902 | #endif | |
903 | ||
904 | /* Process entries in the periodic ready list */ | |
905 | qh_ptr = hsotg->periodic_sched_ready.next; | |
906 | while (qh_ptr != &hsotg->periodic_sched_ready) { | |
907 | if (list_empty(&hsotg->free_hc_list)) | |
908 | break; | |
20f2eb9c DC |
909 | if (hsotg->core_params->uframe_sched > 0) { |
910 | if (hsotg->available_host_channels <= 1) | |
911 | break; | |
912 | hsotg->available_host_channels--; | |
913 | } | |
7359d482 | 914 | qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); |
20f2eb9c DC |
915 | if (dwc2_assign_and_init_hc(hsotg, qh)) |
916 | break; | |
7359d482 PZ |
917 | |
918 | /* | |
919 | * Move the QH from the periodic ready schedule to the | |
920 | * periodic assigned schedule | |
921 | */ | |
922 | qh_ptr = qh_ptr->next; | |
923 | list_move(&qh->qh_list_entry, &hsotg->periodic_sched_assigned); | |
924 | ret_val = DWC2_TRANSACTION_PERIODIC; | |
925 | } | |
926 | ||
927 | /* | |
928 | * Process entries in the inactive portion of the non-periodic | |
929 | * schedule. Some free host channels may not be used if they are | |
930 | * reserved for periodic transfers. | |
931 | */ | |
932 | num_channels = hsotg->core_params->host_channels; | |
933 | qh_ptr = hsotg->non_periodic_sched_inactive.next; | |
934 | while (qh_ptr != &hsotg->non_periodic_sched_inactive) { | |
20f2eb9c DC |
935 | if (hsotg->core_params->uframe_sched <= 0 && |
936 | hsotg->non_periodic_channels >= num_channels - | |
7359d482 PZ |
937 | hsotg->periodic_channels) |
938 | break; | |
939 | if (list_empty(&hsotg->free_hc_list)) | |
940 | break; | |
941 | qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); | |
20f2eb9c DC |
942 | if (hsotg->core_params->uframe_sched > 0) { |
943 | if (hsotg->available_host_channels < 1) | |
944 | break; | |
945 | hsotg->available_host_channels--; | |
946 | } | |
947 | ||
948 | if (dwc2_assign_and_init_hc(hsotg, qh)) | |
949 | break; | |
7359d482 PZ |
950 | |
951 | /* | |
952 | * Move the QH from the non-periodic inactive schedule to the | |
953 | * non-periodic active schedule | |
954 | */ | |
955 | qh_ptr = qh_ptr->next; | |
956 | list_move(&qh->qh_list_entry, | |
957 | &hsotg->non_periodic_sched_active); | |
958 | ||
959 | if (ret_val == DWC2_TRANSACTION_NONE) | |
960 | ret_val = DWC2_TRANSACTION_NON_PERIODIC; | |
961 | else | |
962 | ret_val = DWC2_TRANSACTION_ALL; | |
963 | ||
20f2eb9c DC |
964 | if (hsotg->core_params->uframe_sched <= 0) |
965 | hsotg->non_periodic_channels++; | |
7359d482 PZ |
966 | } |
967 | ||
968 | return ret_val; | |
969 | } | |
970 | ||
971 | /** | |
972 | * dwc2_queue_transaction() - Attempts to queue a single transaction request for | |
973 | * a host channel associated with either a periodic or non-periodic transfer | |
974 | * | |
975 | * @hsotg: The HCD state structure | |
976 | * @chan: Host channel descriptor associated with either a periodic or | |
977 | * non-periodic transfer | |
978 | * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO | |
979 | * for periodic transfers or the non-periodic Tx FIFO | |
980 | * for non-periodic transfers | |
981 | * | |
982 | * Return: 1 if a request is queued and more requests may be needed to | |
983 | * complete the transfer, 0 if no more requests are required for this | |
984 | * transfer, -1 if there is insufficient space in the Tx FIFO | |
985 | * | |
986 | * This function assumes that there is space available in the appropriate | |
987 | * request queue. For an OUT transfer or SETUP transaction in Slave mode, | |
988 | * it checks whether space is available in the appropriate Tx FIFO. | |
989 | * | |
990 | * Must be called with interrupt disabled and spinlock held | |
991 | */ | |
992 | static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, | |
993 | struct dwc2_host_chan *chan, | |
994 | u16 fifo_dwords_avail) | |
995 | { | |
996 | int retval = 0; | |
997 | ||
998 | if (hsotg->core_params->dma_enable > 0) { | |
999 | if (hsotg->core_params->dma_desc_enable > 0) { | |
1000 | if (!chan->xfer_started || | |
1001 | chan->ep_type == USB_ENDPOINT_XFER_ISOC) { | |
1002 | dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); | |
1003 | chan->qh->ping_state = 0; | |
1004 | } | |
1005 | } else if (!chan->xfer_started) { | |
1006 | dwc2_hc_start_transfer(hsotg, chan); | |
1007 | chan->qh->ping_state = 0; | |
1008 | } | |
1009 | } else if (chan->halt_pending) { | |
1010 | /* Don't queue a request if the channel has been halted */ | |
1011 | } else if (chan->halt_on_queue) { | |
1012 | dwc2_hc_halt(hsotg, chan, chan->halt_status); | |
1013 | } else if (chan->do_ping) { | |
1014 | if (!chan->xfer_started) | |
1015 | dwc2_hc_start_transfer(hsotg, chan); | |
1016 | } else if (!chan->ep_is_in || | |
1017 | chan->data_pid_start == DWC2_HC_PID_SETUP) { | |
1018 | if ((fifo_dwords_avail * 4) >= chan->max_packet) { | |
1019 | if (!chan->xfer_started) { | |
1020 | dwc2_hc_start_transfer(hsotg, chan); | |
1021 | retval = 1; | |
1022 | } else { | |
1023 | retval = dwc2_hc_continue_transfer(hsotg, chan); | |
1024 | } | |
1025 | } else { | |
1026 | retval = -1; | |
1027 | } | |
1028 | } else { | |
1029 | if (!chan->xfer_started) { | |
1030 | dwc2_hc_start_transfer(hsotg, chan); | |
1031 | retval = 1; | |
1032 | } else { | |
1033 | retval = dwc2_hc_continue_transfer(hsotg, chan); | |
1034 | } | |
1035 | } | |
1036 | ||
1037 | return retval; | |
1038 | } | |
1039 | ||
1040 | /* | |
1041 | * Processes periodic channels for the next frame and queues transactions for | |
1042 | * these channels to the DWC_otg controller. After queueing transactions, the | |
1043 | * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions | |
1044 | * to queue as Periodic Tx FIFO or request queue space becomes available. | |
1045 | * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. | |
1046 | * | |
1047 | * Must be called with interrupt disabled and spinlock held | |
1048 | */ | |
1049 | static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) | |
1050 | { | |
1051 | struct list_head *qh_ptr; | |
1052 | struct dwc2_qh *qh; | |
1053 | u32 tx_status; | |
1054 | u32 fspcavail; | |
1055 | u32 gintmsk; | |
1056 | int status; | |
1057 | int no_queue_space = 0; | |
1058 | int no_fifo_space = 0; | |
1059 | u32 qspcavail; | |
1060 | ||
b49977a6 MK |
1061 | if (dbg_perio()) |
1062 | dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); | |
7359d482 PZ |
1063 | |
1064 | tx_status = readl(hsotg->regs + HPTXSTS); | |
d6ec53e0 MK |
1065 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1066 | TXSTS_QSPCAVAIL_SHIFT; | |
1067 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> | |
1068 | TXSTS_FSPCAVAIL_SHIFT; | |
b49977a6 MK |
1069 | |
1070 | if (dbg_perio()) { | |
1071 | dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", | |
1072 | qspcavail); | |
1073 | dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", | |
1074 | fspcavail); | |
1075 | } | |
7359d482 PZ |
1076 | |
1077 | qh_ptr = hsotg->periodic_sched_assigned.next; | |
1078 | while (qh_ptr != &hsotg->periodic_sched_assigned) { | |
1079 | tx_status = readl(hsotg->regs + HPTXSTS); | |
acdb9046 MK |
1080 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1081 | TXSTS_QSPCAVAIL_SHIFT; | |
1082 | if (qspcavail == 0) { | |
7359d482 PZ |
1083 | no_queue_space = 1; |
1084 | break; | |
1085 | } | |
1086 | ||
1087 | qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); | |
1088 | if (!qh->channel) { | |
1089 | qh_ptr = qh_ptr->next; | |
1090 | continue; | |
1091 | } | |
1092 | ||
1093 | /* Make sure EP's TT buffer is clean before queueing qtds */ | |
1094 | if (qh->tt_buffer_dirty) { | |
1095 | qh_ptr = qh_ptr->next; | |
1096 | continue; | |
1097 | } | |
1098 | ||
1099 | /* | |
1100 | * Set a flag if we're queuing high-bandwidth in slave mode. | |
1101 | * The flag prevents any halts to get into the request queue in | |
1102 | * the middle of multiple high-bandwidth packets getting queued. | |
1103 | */ | |
1104 | if (hsotg->core_params->dma_enable <= 0 && | |
1105 | qh->channel->multi_count > 1) | |
1106 | hsotg->queuing_high_bandwidth = 1; | |
1107 | ||
d6ec53e0 MK |
1108 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> |
1109 | TXSTS_FSPCAVAIL_SHIFT; | |
7359d482 PZ |
1110 | status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); |
1111 | if (status < 0) { | |
1112 | no_fifo_space = 1; | |
1113 | break; | |
1114 | } | |
1115 | ||
1116 | /* | |
1117 | * In Slave mode, stay on the current transfer until there is | |
1118 | * nothing more to do or the high-bandwidth request count is | |
1119 | * reached. In DMA mode, only need to queue one request. The | |
1120 | * controller automatically handles multiple packets for | |
1121 | * high-bandwidth transfers. | |
1122 | */ | |
1123 | if (hsotg->core_params->dma_enable > 0 || status == 0 || | |
1124 | qh->channel->requests == qh->channel->multi_count) { | |
1125 | qh_ptr = qh_ptr->next; | |
1126 | /* | |
1127 | * Move the QH from the periodic assigned schedule to | |
1128 | * the periodic queued schedule | |
1129 | */ | |
1130 | list_move(&qh->qh_list_entry, | |
1131 | &hsotg->periodic_sched_queued); | |
1132 | ||
1133 | /* done queuing high bandwidth */ | |
1134 | hsotg->queuing_high_bandwidth = 0; | |
1135 | } | |
1136 | } | |
1137 | ||
1138 | if (hsotg->core_params->dma_enable <= 0) { | |
1139 | tx_status = readl(hsotg->regs + HPTXSTS); | |
d6ec53e0 MK |
1140 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1141 | TXSTS_QSPCAVAIL_SHIFT; | |
1142 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> | |
1143 | TXSTS_FSPCAVAIL_SHIFT; | |
b49977a6 MK |
1144 | if (dbg_perio()) { |
1145 | dev_vdbg(hsotg->dev, | |
1146 | " P Tx Req Queue Space Avail (after queue): %d\n", | |
1147 | qspcavail); | |
1148 | dev_vdbg(hsotg->dev, | |
1149 | " P Tx FIFO Space Avail (after queue): %d\n", | |
1150 | fspcavail); | |
1151 | } | |
7359d482 PZ |
1152 | |
1153 | if (!list_empty(&hsotg->periodic_sched_assigned) || | |
1154 | no_queue_space || no_fifo_space) { | |
1155 | /* | |
1156 | * May need to queue more transactions as the request | |
1157 | * queue or Tx FIFO empties. Enable the periodic Tx | |
1158 | * FIFO empty interrupt. (Always use the half-empty | |
1159 | * level to ensure that new requests are loaded as | |
1160 | * soon as possible.) | |
1161 | */ | |
1162 | gintmsk = readl(hsotg->regs + GINTMSK); | |
1163 | gintmsk |= GINTSTS_PTXFEMP; | |
1164 | writel(gintmsk, hsotg->regs + GINTMSK); | |
1165 | } else { | |
1166 | /* | |
1167 | * Disable the Tx FIFO empty interrupt since there are | |
1168 | * no more transactions that need to be queued right | |
1169 | * now. This function is called from interrupt | |
1170 | * handlers to queue more transactions as transfer | |
1171 | * states change. | |
1172 | */ | |
1173 | gintmsk = readl(hsotg->regs + GINTMSK); | |
1174 | gintmsk &= ~GINTSTS_PTXFEMP; | |
1175 | writel(gintmsk, hsotg->regs + GINTMSK); | |
1176 | } | |
1177 | } | |
1178 | } | |
1179 | ||
1180 | /* | |
1181 | * Processes active non-periodic channels and queues transactions for these | |
1182 | * channels to the DWC_otg controller. After queueing transactions, the NP Tx | |
1183 | * FIFO Empty interrupt is enabled if there are more transactions to queue as | |
1184 | * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx | |
1185 | * FIFO Empty interrupt is disabled. | |
1186 | * | |
1187 | * Must be called with interrupt disabled and spinlock held | |
1188 | */ | |
1189 | static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) | |
1190 | { | |
1191 | struct list_head *orig_qh_ptr; | |
1192 | struct dwc2_qh *qh; | |
1193 | u32 tx_status; | |
1194 | u32 qspcavail; | |
1195 | u32 fspcavail; | |
1196 | u32 gintmsk; | |
1197 | int status; | |
1198 | int no_queue_space = 0; | |
1199 | int no_fifo_space = 0; | |
1200 | int more_to_do = 0; | |
1201 | ||
1202 | dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); | |
1203 | ||
1204 | tx_status = readl(hsotg->regs + GNPTXSTS); | |
d6ec53e0 MK |
1205 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1206 | TXSTS_QSPCAVAIL_SHIFT; | |
1207 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> | |
1208 | TXSTS_FSPCAVAIL_SHIFT; | |
7359d482 PZ |
1209 | dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", |
1210 | qspcavail); | |
1211 | dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", | |
1212 | fspcavail); | |
1213 | ||
1214 | /* | |
1215 | * Keep track of the starting point. Skip over the start-of-list | |
1216 | * entry. | |
1217 | */ | |
1218 | if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) | |
1219 | hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; | |
1220 | orig_qh_ptr = hsotg->non_periodic_qh_ptr; | |
1221 | ||
1222 | /* | |
1223 | * Process once through the active list or until no more space is | |
1224 | * available in the request queue or the Tx FIFO | |
1225 | */ | |
1226 | do { | |
1227 | tx_status = readl(hsotg->regs + GNPTXSTS); | |
d6ec53e0 MK |
1228 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1229 | TXSTS_QSPCAVAIL_SHIFT; | |
7359d482 PZ |
1230 | if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) { |
1231 | no_queue_space = 1; | |
1232 | break; | |
1233 | } | |
1234 | ||
1235 | qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, | |
1236 | qh_list_entry); | |
1237 | if (!qh->channel) | |
1238 | goto next; | |
1239 | ||
1240 | /* Make sure EP's TT buffer is clean before queueing qtds */ | |
1241 | if (qh->tt_buffer_dirty) | |
1242 | goto next; | |
1243 | ||
d6ec53e0 MK |
1244 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> |
1245 | TXSTS_FSPCAVAIL_SHIFT; | |
7359d482 PZ |
1246 | status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); |
1247 | ||
1248 | if (status > 0) { | |
1249 | more_to_do = 1; | |
1250 | } else if (status < 0) { | |
1251 | no_fifo_space = 1; | |
1252 | break; | |
1253 | } | |
1254 | next: | |
1255 | /* Advance to next QH, skipping start-of-list entry */ | |
1256 | hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; | |
1257 | if (hsotg->non_periodic_qh_ptr == | |
1258 | &hsotg->non_periodic_sched_active) | |
1259 | hsotg->non_periodic_qh_ptr = | |
1260 | hsotg->non_periodic_qh_ptr->next; | |
1261 | } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); | |
1262 | ||
1263 | if (hsotg->core_params->dma_enable <= 0) { | |
1264 | tx_status = readl(hsotg->regs + GNPTXSTS); | |
d6ec53e0 MK |
1265 | qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> |
1266 | TXSTS_QSPCAVAIL_SHIFT; | |
1267 | fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> | |
1268 | TXSTS_FSPCAVAIL_SHIFT; | |
7359d482 PZ |
1269 | dev_vdbg(hsotg->dev, |
1270 | " NP Tx Req Queue Space Avail (after queue): %d\n", | |
1271 | qspcavail); | |
1272 | dev_vdbg(hsotg->dev, | |
1273 | " NP Tx FIFO Space Avail (after queue): %d\n", | |
1274 | fspcavail); | |
1275 | ||
1276 | if (more_to_do || no_queue_space || no_fifo_space) { | |
1277 | /* | |
1278 | * May need to queue more transactions as the request | |
1279 | * queue or Tx FIFO empties. Enable the non-periodic | |
1280 | * Tx FIFO empty interrupt. (Always use the half-empty | |
1281 | * level to ensure that new requests are loaded as | |
1282 | * soon as possible.) | |
1283 | */ | |
1284 | gintmsk = readl(hsotg->regs + GINTMSK); | |
1285 | gintmsk |= GINTSTS_NPTXFEMP; | |
1286 | writel(gintmsk, hsotg->regs + GINTMSK); | |
1287 | } else { | |
1288 | /* | |
1289 | * Disable the Tx FIFO empty interrupt since there are | |
1290 | * no more transactions that need to be queued right | |
1291 | * now. This function is called from interrupt | |
1292 | * handlers to queue more transactions as transfer | |
1293 | * states change. | |
1294 | */ | |
1295 | gintmsk = readl(hsotg->regs + GINTMSK); | |
1296 | gintmsk &= ~GINTSTS_NPTXFEMP; | |
1297 | writel(gintmsk, hsotg->regs + GINTMSK); | |
1298 | } | |
1299 | } | |
1300 | } | |
1301 | ||
1302 | /** | |
1303 | * dwc2_hcd_queue_transactions() - Processes the currently active host channels | |
1304 | * and queues transactions for these channels to the DWC_otg controller. Called | |
1305 | * from the HCD interrupt handler functions. | |
1306 | * | |
1307 | * @hsotg: The HCD state structure | |
1308 | * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, | |
1309 | * or both) | |
1310 | * | |
1311 | * Must be called with interrupt disabled and spinlock held | |
1312 | */ | |
1313 | void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, | |
1314 | enum dwc2_transaction_type tr_type) | |
1315 | { | |
1316 | #ifdef DWC2_DEBUG_SOF | |
1317 | dev_vdbg(hsotg->dev, "Queue Transactions\n"); | |
1318 | #endif | |
1319 | /* Process host channels associated with periodic transfers */ | |
1320 | if ((tr_type == DWC2_TRANSACTION_PERIODIC || | |
1321 | tr_type == DWC2_TRANSACTION_ALL) && | |
1322 | !list_empty(&hsotg->periodic_sched_assigned)) | |
1323 | dwc2_process_periodic_channels(hsotg); | |
1324 | ||
1325 | /* Process host channels associated with non-periodic transfers */ | |
1326 | if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || | |
1327 | tr_type == DWC2_TRANSACTION_ALL) { | |
1328 | if (!list_empty(&hsotg->non_periodic_sched_active)) { | |
1329 | dwc2_process_non_periodic_channels(hsotg); | |
1330 | } else { | |
1331 | /* | |
1332 | * Ensure NP Tx FIFO empty interrupt is disabled when | |
1333 | * there are no non-periodic transfers to process | |
1334 | */ | |
1335 | u32 gintmsk = readl(hsotg->regs + GINTMSK); | |
1336 | ||
1337 | gintmsk &= ~GINTSTS_NPTXFEMP; | |
1338 | writel(gintmsk, hsotg->regs + GINTMSK); | |
1339 | } | |
1340 | } | |
1341 | } | |
1342 | ||
1343 | static void dwc2_conn_id_status_change(struct work_struct *work) | |
1344 | { | |
1345 | struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, | |
1346 | wf_otg); | |
1347 | u32 count = 0; | |
1348 | u32 gotgctl; | |
1349 | ||
1350 | dev_dbg(hsotg->dev, "%s()\n", __func__); | |
1351 | ||
1352 | gotgctl = readl(hsotg->regs + GOTGCTL); | |
1353 | dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); | |
1354 | dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", | |
1355 | !!(gotgctl & GOTGCTL_CONID_B)); | |
1356 | ||
1357 | /* B-Device connector (Device Mode) */ | |
1358 | if (gotgctl & GOTGCTL_CONID_B) { | |
1359 | /* Wait for switch to device mode */ | |
1360 | dev_dbg(hsotg->dev, "connId B\n"); | |
1361 | while (!dwc2_is_device_mode(hsotg)) { | |
1362 | dev_info(hsotg->dev, | |
1363 | "Waiting for Peripheral Mode, Mode=%s\n", | |
1364 | dwc2_is_host_mode(hsotg) ? "Host" : | |
1365 | "Peripheral"); | |
1366 | usleep_range(20000, 40000); | |
1367 | if (++count > 250) | |
1368 | break; | |
1369 | } | |
1370 | if (count > 250) | |
1371 | dev_err(hsotg->dev, | |
de9169a1 | 1372 | "Connection id status change timed out\n"); |
7359d482 | 1373 | hsotg->op_state = OTG_STATE_B_PERIPHERAL; |
6706c721 | 1374 | dwc2_core_init(hsotg, false, -1); |
7359d482 | 1375 | dwc2_enable_global_interrupts(hsotg); |
643cc4de | 1376 | s3c_hsotg_core_init_disconnected(hsotg, false); |
510ffaa4 | 1377 | s3c_hsotg_core_connect(hsotg); |
7359d482 PZ |
1378 | } else { |
1379 | /* A-Device connector (Host Mode) */ | |
1380 | dev_dbg(hsotg->dev, "connId A\n"); | |
1381 | while (!dwc2_is_host_mode(hsotg)) { | |
1382 | dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", | |
1383 | dwc2_is_host_mode(hsotg) ? | |
1384 | "Host" : "Peripheral"); | |
1385 | usleep_range(20000, 40000); | |
1386 | if (++count > 250) | |
1387 | break; | |
1388 | } | |
1389 | if (count > 250) | |
1390 | dev_err(hsotg->dev, | |
de9169a1 | 1391 | "Connection id status change timed out\n"); |
7359d482 PZ |
1392 | hsotg->op_state = OTG_STATE_A_HOST; |
1393 | ||
1394 | /* Initialize the Core for Host mode */ | |
6706c721 | 1395 | dwc2_core_init(hsotg, false, -1); |
7359d482 PZ |
1396 | dwc2_enable_global_interrupts(hsotg); |
1397 | dwc2_hcd_start(hsotg); | |
1398 | } | |
1399 | } | |
1400 | ||
1401 | static void dwc2_wakeup_detected(unsigned long data) | |
1402 | { | |
1403 | struct dwc2_hsotg *hsotg = (struct dwc2_hsotg *)data; | |
1404 | u32 hprt0; | |
1405 | ||
1406 | dev_dbg(hsotg->dev, "%s()\n", __func__); | |
1407 | ||
1408 | /* | |
1409 | * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms | |
1410 | * so that OPT tests pass with all PHYs.) | |
1411 | */ | |
1412 | hprt0 = dwc2_read_hprt0(hsotg); | |
1413 | dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); | |
1414 | hprt0 &= ~HPRT0_RES; | |
1415 | writel(hprt0, hsotg->regs + HPRT0); | |
1416 | dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", | |
1417 | readl(hsotg->regs + HPRT0)); | |
1418 | ||
1419 | dwc2_hcd_rem_wakeup(hsotg); | |
1420 | ||
1421 | /* Change to L0 state */ | |
1422 | hsotg->lx_state = DWC2_L0; | |
1423 | } | |
1424 | ||
1425 | static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) | |
1426 | { | |
1427 | struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); | |
1428 | ||
1429 | return hcd->self.b_hnp_enable; | |
1430 | } | |
1431 | ||
1432 | /* Must NOT be called with interrupt disabled or spinlock held */ | |
1433 | static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) | |
1434 | { | |
1435 | unsigned long flags; | |
1436 | u32 hprt0; | |
1437 | u32 pcgctl; | |
1438 | u32 gotgctl; | |
1439 | ||
1440 | dev_dbg(hsotg->dev, "%s()\n", __func__); | |
1441 | ||
1442 | spin_lock_irqsave(&hsotg->lock, flags); | |
1443 | ||
1444 | if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { | |
1445 | gotgctl = readl(hsotg->regs + GOTGCTL); | |
1446 | gotgctl |= GOTGCTL_HSTSETHNPEN; | |
1447 | writel(gotgctl, hsotg->regs + GOTGCTL); | |
1448 | hsotg->op_state = OTG_STATE_A_SUSPEND; | |
1449 | } | |
1450 | ||
1451 | hprt0 = dwc2_read_hprt0(hsotg); | |
1452 | hprt0 |= HPRT0_SUSP; | |
1453 | writel(hprt0, hsotg->regs + HPRT0); | |
1454 | ||
1455 | /* Update lx_state */ | |
1456 | hsotg->lx_state = DWC2_L2; | |
1457 | ||
1458 | /* Suspend the Phy Clock */ | |
1459 | pcgctl = readl(hsotg->regs + PCGCTL); | |
1460 | pcgctl |= PCGCTL_STOPPCLK; | |
1461 | writel(pcgctl, hsotg->regs + PCGCTL); | |
1462 | udelay(10); | |
1463 | ||
1464 | /* For HNP the bus must be suspended for at least 200ms */ | |
1465 | if (dwc2_host_is_b_hnp_enabled(hsotg)) { | |
1466 | pcgctl = readl(hsotg->regs + PCGCTL); | |
1467 | pcgctl &= ~PCGCTL_STOPPCLK; | |
1468 | writel(pcgctl, hsotg->regs + PCGCTL); | |
1469 | ||
1470 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
1471 | ||
1472 | usleep_range(200000, 250000); | |
1473 | } else { | |
1474 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
1475 | } | |
1476 | } | |
1477 | ||
1478 | /* Handles hub class-specific requests */ | |
1479 | static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, | |
1480 | u16 wvalue, u16 windex, char *buf, u16 wlength) | |
1481 | { | |
1482 | struct usb_hub_descriptor *hub_desc; | |
1483 | int retval = 0; | |
1484 | u32 hprt0; | |
1485 | u32 port_status; | |
1486 | u32 speed; | |
1487 | u32 pcgctl; | |
1488 | ||
1489 | switch (typereq) { | |
1490 | case ClearHubFeature: | |
1491 | dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); | |
1492 | ||
1493 | switch (wvalue) { | |
1494 | case C_HUB_LOCAL_POWER: | |
1495 | case C_HUB_OVER_CURRENT: | |
1496 | /* Nothing required here */ | |
1497 | break; | |
1498 | ||
1499 | default: | |
1500 | retval = -EINVAL; | |
1501 | dev_err(hsotg->dev, | |
1502 | "ClearHubFeature request %1xh unknown\n", | |
1503 | wvalue); | |
1504 | } | |
1505 | break; | |
1506 | ||
1507 | case ClearPortFeature: | |
1508 | if (wvalue != USB_PORT_FEAT_L1) | |
1509 | if (!windex || windex > 1) | |
1510 | goto error; | |
1511 | switch (wvalue) { | |
1512 | case USB_PORT_FEAT_ENABLE: | |
1513 | dev_dbg(hsotg->dev, | |
1514 | "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); | |
1515 | hprt0 = dwc2_read_hprt0(hsotg); | |
1516 | hprt0 |= HPRT0_ENA; | |
1517 | writel(hprt0, hsotg->regs + HPRT0); | |
1518 | break; | |
1519 | ||
1520 | case USB_PORT_FEAT_SUSPEND: | |
1521 | dev_dbg(hsotg->dev, | |
1522 | "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); | |
b0bb9bb6 PZ |
1523 | writel(0, hsotg->regs + PCGCTL); |
1524 | usleep_range(20000, 40000); | |
1525 | ||
1526 | hprt0 = dwc2_read_hprt0(hsotg); | |
1527 | hprt0 |= HPRT0_RES; | |
1528 | writel(hprt0, hsotg->regs + HPRT0); | |
1529 | hprt0 &= ~HPRT0_SUSP; | |
1530 | usleep_range(100000, 150000); | |
1531 | ||
1532 | hprt0 &= ~HPRT0_RES; | |
1533 | writel(hprt0, hsotg->regs + HPRT0); | |
7359d482 PZ |
1534 | break; |
1535 | ||
1536 | case USB_PORT_FEAT_POWER: | |
1537 | dev_dbg(hsotg->dev, | |
1538 | "ClearPortFeature USB_PORT_FEAT_POWER\n"); | |
1539 | hprt0 = dwc2_read_hprt0(hsotg); | |
1540 | hprt0 &= ~HPRT0_PWR; | |
1541 | writel(hprt0, hsotg->regs + HPRT0); | |
1542 | break; | |
1543 | ||
1544 | case USB_PORT_FEAT_INDICATOR: | |
1545 | dev_dbg(hsotg->dev, | |
1546 | "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); | |
1547 | /* Port indicator not supported */ | |
1548 | break; | |
1549 | ||
1550 | case USB_PORT_FEAT_C_CONNECTION: | |
1551 | /* | |
1552 | * Clears driver's internal Connect Status Change flag | |
1553 | */ | |
1554 | dev_dbg(hsotg->dev, | |
1555 | "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); | |
1556 | hsotg->flags.b.port_connect_status_change = 0; | |
1557 | break; | |
1558 | ||
1559 | case USB_PORT_FEAT_C_RESET: | |
1560 | /* Clears driver's internal Port Reset Change flag */ | |
1561 | dev_dbg(hsotg->dev, | |
1562 | "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); | |
1563 | hsotg->flags.b.port_reset_change = 0; | |
1564 | break; | |
1565 | ||
1566 | case USB_PORT_FEAT_C_ENABLE: | |
1567 | /* | |
1568 | * Clears the driver's internal Port Enable/Disable | |
1569 | * Change flag | |
1570 | */ | |
1571 | dev_dbg(hsotg->dev, | |
1572 | "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); | |
1573 | hsotg->flags.b.port_enable_change = 0; | |
1574 | break; | |
1575 | ||
1576 | case USB_PORT_FEAT_C_SUSPEND: | |
1577 | /* | |
1578 | * Clears the driver's internal Port Suspend Change | |
1579 | * flag, which is set when resume signaling on the host | |
1580 | * port is complete | |
1581 | */ | |
1582 | dev_dbg(hsotg->dev, | |
1583 | "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); | |
1584 | hsotg->flags.b.port_suspend_change = 0; | |
1585 | break; | |
1586 | ||
1587 | case USB_PORT_FEAT_C_PORT_L1: | |
1588 | dev_dbg(hsotg->dev, | |
1589 | "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); | |
1590 | hsotg->flags.b.port_l1_change = 0; | |
1591 | break; | |
1592 | ||
1593 | case USB_PORT_FEAT_C_OVER_CURRENT: | |
1594 | dev_dbg(hsotg->dev, | |
1595 | "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); | |
1596 | hsotg->flags.b.port_over_current_change = 0; | |
1597 | break; | |
1598 | ||
1599 | default: | |
1600 | retval = -EINVAL; | |
1601 | dev_err(hsotg->dev, | |
1602 | "ClearPortFeature request %1xh unknown or unsupported\n", | |
1603 | wvalue); | |
1604 | } | |
1605 | break; | |
1606 | ||
1607 | case GetHubDescriptor: | |
1608 | dev_dbg(hsotg->dev, "GetHubDescriptor\n"); | |
1609 | hub_desc = (struct usb_hub_descriptor *)buf; | |
1610 | hub_desc->bDescLength = 9; | |
1611 | hub_desc->bDescriptorType = 0x29; | |
1612 | hub_desc->bNbrPorts = 1; | |
3d040de8 SS |
1613 | hub_desc->wHubCharacteristics = |
1614 | cpu_to_le16(HUB_CHAR_COMMON_LPSM | | |
1615 | HUB_CHAR_INDV_PORT_OCPM); | |
7359d482 PZ |
1616 | hub_desc->bPwrOn2PwrGood = 1; |
1617 | hub_desc->bHubContrCurrent = 0; | |
1618 | hub_desc->u.hs.DeviceRemovable[0] = 0; | |
1619 | hub_desc->u.hs.DeviceRemovable[1] = 0xff; | |
1620 | break; | |
1621 | ||
1622 | case GetHubStatus: | |
1623 | dev_dbg(hsotg->dev, "GetHubStatus\n"); | |
1624 | memset(buf, 0, 4); | |
1625 | break; | |
1626 | ||
1627 | case GetPortStatus: | |
b8313417 PZ |
1628 | dev_vdbg(hsotg->dev, |
1629 | "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, | |
1630 | hsotg->flags.d32); | |
7359d482 PZ |
1631 | if (!windex || windex > 1) |
1632 | goto error; | |
1633 | ||
1634 | port_status = 0; | |
1635 | if (hsotg->flags.b.port_connect_status_change) | |
1636 | port_status |= USB_PORT_STAT_C_CONNECTION << 16; | |
1637 | if (hsotg->flags.b.port_enable_change) | |
1638 | port_status |= USB_PORT_STAT_C_ENABLE << 16; | |
1639 | if (hsotg->flags.b.port_suspend_change) | |
1640 | port_status |= USB_PORT_STAT_C_SUSPEND << 16; | |
1641 | if (hsotg->flags.b.port_l1_change) | |
1642 | port_status |= USB_PORT_STAT_C_L1 << 16; | |
1643 | if (hsotg->flags.b.port_reset_change) | |
1644 | port_status |= USB_PORT_STAT_C_RESET << 16; | |
1645 | if (hsotg->flags.b.port_over_current_change) { | |
1646 | dev_warn(hsotg->dev, "Overcurrent change detected\n"); | |
1647 | port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; | |
1648 | } | |
1649 | ||
1650 | if (!hsotg->flags.b.port_connect_status) { | |
1651 | /* | |
1652 | * The port is disconnected, which means the core is | |
1653 | * either in device mode or it soon will be. Just | |
1654 | * return 0's for the remainder of the port status | |
1655 | * since the port register can't be read if the core | |
1656 | * is in device mode. | |
1657 | */ | |
1658 | *(__le32 *)buf = cpu_to_le32(port_status); | |
1659 | break; | |
1660 | } | |
1661 | ||
1662 | hprt0 = readl(hsotg->regs + HPRT0); | |
b8313417 | 1663 | dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); |
7359d482 PZ |
1664 | |
1665 | if (hprt0 & HPRT0_CONNSTS) | |
1666 | port_status |= USB_PORT_STAT_CONNECTION; | |
1667 | if (hprt0 & HPRT0_ENA) | |
1668 | port_status |= USB_PORT_STAT_ENABLE; | |
1669 | if (hprt0 & HPRT0_SUSP) | |
1670 | port_status |= USB_PORT_STAT_SUSPEND; | |
1671 | if (hprt0 & HPRT0_OVRCURRACT) | |
1672 | port_status |= USB_PORT_STAT_OVERCURRENT; | |
1673 | if (hprt0 & HPRT0_RST) | |
1674 | port_status |= USB_PORT_STAT_RESET; | |
1675 | if (hprt0 & HPRT0_PWR) | |
1676 | port_status |= USB_PORT_STAT_POWER; | |
1677 | ||
f9234633 | 1678 | speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; |
7359d482 PZ |
1679 | if (speed == HPRT0_SPD_HIGH_SPEED) |
1680 | port_status |= USB_PORT_STAT_HIGH_SPEED; | |
1681 | else if (speed == HPRT0_SPD_LOW_SPEED) | |
1682 | port_status |= USB_PORT_STAT_LOW_SPEED; | |
1683 | ||
1684 | if (hprt0 & HPRT0_TSTCTL_MASK) | |
1685 | port_status |= USB_PORT_STAT_TEST; | |
1686 | /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ | |
1687 | ||
b8313417 | 1688 | dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); |
7359d482 PZ |
1689 | *(__le32 *)buf = cpu_to_le32(port_status); |
1690 | break; | |
1691 | ||
1692 | case SetHubFeature: | |
1693 | dev_dbg(hsotg->dev, "SetHubFeature\n"); | |
1694 | /* No HUB features supported */ | |
1695 | break; | |
1696 | ||
1697 | case SetPortFeature: | |
1698 | dev_dbg(hsotg->dev, "SetPortFeature\n"); | |
1699 | if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) | |
1700 | goto error; | |
1701 | ||
1702 | if (!hsotg->flags.b.port_connect_status) { | |
1703 | /* | |
1704 | * The port is disconnected, which means the core is | |
1705 | * either in device mode or it soon will be. Just | |
1706 | * return without doing anything since the port | |
1707 | * register can't be written if the core is in device | |
1708 | * mode. | |
1709 | */ | |
1710 | break; | |
1711 | } | |
1712 | ||
1713 | switch (wvalue) { | |
1714 | case USB_PORT_FEAT_SUSPEND: | |
1715 | dev_dbg(hsotg->dev, | |
1716 | "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); | |
1717 | if (windex != hsotg->otg_port) | |
1718 | goto error; | |
1719 | dwc2_port_suspend(hsotg, windex); | |
1720 | break; | |
1721 | ||
1722 | case USB_PORT_FEAT_POWER: | |
1723 | dev_dbg(hsotg->dev, | |
1724 | "SetPortFeature - USB_PORT_FEAT_POWER\n"); | |
1725 | hprt0 = dwc2_read_hprt0(hsotg); | |
1726 | hprt0 |= HPRT0_PWR; | |
1727 | writel(hprt0, hsotg->regs + HPRT0); | |
1728 | break; | |
1729 | ||
1730 | case USB_PORT_FEAT_RESET: | |
1731 | hprt0 = dwc2_read_hprt0(hsotg); | |
1732 | dev_dbg(hsotg->dev, | |
1733 | "SetPortFeature - USB_PORT_FEAT_RESET\n"); | |
1734 | pcgctl = readl(hsotg->regs + PCGCTL); | |
1735 | pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); | |
1736 | writel(pcgctl, hsotg->regs + PCGCTL); | |
1737 | /* ??? Original driver does this */ | |
1738 | writel(0, hsotg->regs + PCGCTL); | |
1739 | ||
1740 | hprt0 = dwc2_read_hprt0(hsotg); | |
1741 | /* Clear suspend bit if resetting from suspend state */ | |
1742 | hprt0 &= ~HPRT0_SUSP; | |
1743 | ||
1744 | /* | |
1745 | * When B-Host the Port reset bit is set in the Start | |
1746 | * HCD Callback function, so that the reset is started | |
1747 | * within 1ms of the HNP success interrupt | |
1748 | */ | |
1749 | if (!dwc2_hcd_is_b_host(hsotg)) { | |
1750 | hprt0 |= HPRT0_PWR | HPRT0_RST; | |
1751 | dev_dbg(hsotg->dev, | |
1752 | "In host mode, hprt0=%08x\n", hprt0); | |
1753 | writel(hprt0, hsotg->regs + HPRT0); | |
1754 | } | |
1755 | ||
1756 | /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ | |
1757 | usleep_range(50000, 70000); | |
1758 | hprt0 &= ~HPRT0_RST; | |
1759 | writel(hprt0, hsotg->regs + HPRT0); | |
1760 | hsotg->lx_state = DWC2_L0; /* Now back to On state */ | |
1761 | break; | |
1762 | ||
1763 | case USB_PORT_FEAT_INDICATOR: | |
1764 | dev_dbg(hsotg->dev, | |
1765 | "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); | |
1766 | /* Not supported */ | |
1767 | break; | |
1768 | ||
1769 | default: | |
1770 | retval = -EINVAL; | |
1771 | dev_err(hsotg->dev, | |
1772 | "SetPortFeature %1xh unknown or unsupported\n", | |
1773 | wvalue); | |
1774 | break; | |
1775 | } | |
1776 | break; | |
1777 | ||
1778 | default: | |
1779 | error: | |
1780 | retval = -EINVAL; | |
1781 | dev_dbg(hsotg->dev, | |
1782 | "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", | |
1783 | typereq, windex, wvalue); | |
1784 | break; | |
1785 | } | |
1786 | ||
1787 | return retval; | |
1788 | } | |
1789 | ||
1790 | static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) | |
1791 | { | |
1792 | int retval; | |
1793 | ||
7359d482 PZ |
1794 | if (port != 1) |
1795 | return -EINVAL; | |
1796 | ||
1797 | retval = (hsotg->flags.b.port_connect_status_change || | |
1798 | hsotg->flags.b.port_reset_change || | |
1799 | hsotg->flags.b.port_enable_change || | |
1800 | hsotg->flags.b.port_suspend_change || | |
1801 | hsotg->flags.b.port_over_current_change); | |
1802 | ||
1803 | if (retval) { | |
1804 | dev_dbg(hsotg->dev, | |
1805 | "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); | |
1806 | dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", | |
1807 | hsotg->flags.b.port_connect_status_change); | |
1808 | dev_dbg(hsotg->dev, " port_reset_change: %d\n", | |
1809 | hsotg->flags.b.port_reset_change); | |
1810 | dev_dbg(hsotg->dev, " port_enable_change: %d\n", | |
1811 | hsotg->flags.b.port_enable_change); | |
1812 | dev_dbg(hsotg->dev, " port_suspend_change: %d\n", | |
1813 | hsotg->flags.b.port_suspend_change); | |
1814 | dev_dbg(hsotg->dev, " port_over_current_change: %d\n", | |
1815 | hsotg->flags.b.port_over_current_change); | |
1816 | } | |
1817 | ||
1818 | return retval; | |
1819 | } | |
1820 | ||
1821 | int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) | |
1822 | { | |
1823 | u32 hfnum = readl(hsotg->regs + HFNUM); | |
1824 | ||
1825 | #ifdef DWC2_DEBUG_SOF | |
1826 | dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", | |
d6ec53e0 | 1827 | (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); |
7359d482 | 1828 | #endif |
d6ec53e0 | 1829 | return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; |
7359d482 PZ |
1830 | } |
1831 | ||
1832 | int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) | |
1833 | { | |
6bf2e2a5 | 1834 | return hsotg->op_state == OTG_STATE_B_HOST; |
7359d482 PZ |
1835 | } |
1836 | ||
1837 | static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, | |
1838 | int iso_desc_count, | |
1839 | gfp_t mem_flags) | |
1840 | { | |
1841 | struct dwc2_hcd_urb *urb; | |
1842 | u32 size = sizeof(*urb) + iso_desc_count * | |
1843 | sizeof(struct dwc2_hcd_iso_packet_desc); | |
1844 | ||
1845 | urb = kzalloc(size, mem_flags); | |
1846 | if (urb) | |
1847 | urb->packet_count = iso_desc_count; | |
1848 | return urb; | |
1849 | } | |
1850 | ||
1851 | static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, | |
1852 | struct dwc2_hcd_urb *urb, u8 dev_addr, | |
1853 | u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps) | |
1854 | { | |
b49977a6 MK |
1855 | if (dbg_perio() || |
1856 | ep_type == USB_ENDPOINT_XFER_BULK || | |
1857 | ep_type == USB_ENDPOINT_XFER_CONTROL) | |
1858 | dev_vdbg(hsotg->dev, | |
1859 | "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n", | |
1860 | dev_addr, ep_num, ep_dir, ep_type, mps); | |
7359d482 PZ |
1861 | urb->pipe_info.dev_addr = dev_addr; |
1862 | urb->pipe_info.ep_num = ep_num; | |
1863 | urb->pipe_info.pipe_type = ep_type; | |
1864 | urb->pipe_info.pipe_dir = ep_dir; | |
1865 | urb->pipe_info.mps = mps; | |
1866 | } | |
1867 | ||
1868 | /* | |
1869 | * NOTE: This function will be removed once the peripheral controller code | |
1870 | * is integrated and the driver is stable | |
1871 | */ | |
1872 | void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) | |
1873 | { | |
1874 | #ifdef DEBUG | |
1875 | struct dwc2_host_chan *chan; | |
1876 | struct dwc2_hcd_urb *urb; | |
1877 | struct dwc2_qtd *qtd; | |
1878 | int num_channels; | |
1879 | u32 np_tx_status; | |
1880 | u32 p_tx_status; | |
1881 | int i; | |
1882 | ||
1883 | num_channels = hsotg->core_params->host_channels; | |
1884 | dev_dbg(hsotg->dev, "\n"); | |
1885 | dev_dbg(hsotg->dev, | |
1886 | "************************************************************\n"); | |
1887 | dev_dbg(hsotg->dev, "HCD State:\n"); | |
1888 | dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); | |
1889 | ||
1890 | for (i = 0; i < num_channels; i++) { | |
1891 | chan = hsotg->hc_ptr_array[i]; | |
1892 | dev_dbg(hsotg->dev, " Channel %d:\n", i); | |
1893 | dev_dbg(hsotg->dev, | |
1894 | " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", | |
1895 | chan->dev_addr, chan->ep_num, chan->ep_is_in); | |
1896 | dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); | |
1897 | dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); | |
1898 | dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); | |
1899 | dev_dbg(hsotg->dev, " data_pid_start: %d\n", | |
1900 | chan->data_pid_start); | |
1901 | dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); | |
1902 | dev_dbg(hsotg->dev, " xfer_started: %d\n", | |
1903 | chan->xfer_started); | |
1904 | dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); | |
1905 | dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", | |
1906 | (unsigned long)chan->xfer_dma); | |
1907 | dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); | |
1908 | dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); | |
1909 | dev_dbg(hsotg->dev, " halt_on_queue: %d\n", | |
1910 | chan->halt_on_queue); | |
1911 | dev_dbg(hsotg->dev, " halt_pending: %d\n", | |
1912 | chan->halt_pending); | |
1913 | dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); | |
1914 | dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); | |
1915 | dev_dbg(hsotg->dev, " complete_split: %d\n", | |
1916 | chan->complete_split); | |
1917 | dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); | |
1918 | dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); | |
1919 | dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); | |
1920 | dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); | |
1921 | dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); | |
1922 | ||
1923 | if (chan->xfer_started) { | |
1924 | u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; | |
1925 | ||
1926 | hfnum = readl(hsotg->regs + HFNUM); | |
1927 | hcchar = readl(hsotg->regs + HCCHAR(i)); | |
1928 | hctsiz = readl(hsotg->regs + HCTSIZ(i)); | |
1929 | hcint = readl(hsotg->regs + HCINT(i)); | |
1930 | hcintmsk = readl(hsotg->regs + HCINTMSK(i)); | |
1931 | dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); | |
1932 | dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); | |
1933 | dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); | |
1934 | dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); | |
1935 | dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); | |
1936 | } | |
1937 | ||
1938 | if (!(chan->xfer_started && chan->qh)) | |
1939 | continue; | |
1940 | ||
1941 | list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { | |
1942 | if (!qtd->in_process) | |
1943 | break; | |
1944 | urb = qtd->urb; | |
1945 | dev_dbg(hsotg->dev, " URB Info:\n"); | |
1946 | dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", | |
1947 | qtd, urb); | |
1948 | if (urb) { | |
1949 | dev_dbg(hsotg->dev, | |
1950 | " Dev: %d, EP: %d %s\n", | |
1951 | dwc2_hcd_get_dev_addr(&urb->pipe_info), | |
1952 | dwc2_hcd_get_ep_num(&urb->pipe_info), | |
1953 | dwc2_hcd_is_pipe_in(&urb->pipe_info) ? | |
1954 | "IN" : "OUT"); | |
1955 | dev_dbg(hsotg->dev, | |
1956 | " Max packet size: %d\n", | |
1957 | dwc2_hcd_get_mps(&urb->pipe_info)); | |
1958 | dev_dbg(hsotg->dev, | |
1959 | " transfer_buffer: %p\n", | |
1960 | urb->buf); | |
157dfaac PZ |
1961 | dev_dbg(hsotg->dev, |
1962 | " transfer_dma: %08lx\n", | |
1963 | (unsigned long)urb->dma); | |
7359d482 PZ |
1964 | dev_dbg(hsotg->dev, |
1965 | " transfer_buffer_length: %d\n", | |
1966 | urb->length); | |
1967 | dev_dbg(hsotg->dev, " actual_length: %d\n", | |
1968 | urb->actual_length); | |
1969 | } | |
1970 | } | |
1971 | } | |
1972 | ||
1973 | dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", | |
1974 | hsotg->non_periodic_channels); | |
1975 | dev_dbg(hsotg->dev, " periodic_channels: %d\n", | |
1976 | hsotg->periodic_channels); | |
1977 | dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); | |
1978 | np_tx_status = readl(hsotg->regs + GNPTXSTS); | |
1979 | dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", | |
d6ec53e0 | 1980 | (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); |
7359d482 | 1981 | dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", |
d6ec53e0 | 1982 | (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); |
7359d482 PZ |
1983 | p_tx_status = readl(hsotg->regs + HPTXSTS); |
1984 | dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", | |
d6ec53e0 | 1985 | (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); |
7359d482 | 1986 | dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", |
d6ec53e0 | 1987 | (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); |
7359d482 PZ |
1988 | dwc2_hcd_dump_frrem(hsotg); |
1989 | dwc2_dump_global_registers(hsotg); | |
1990 | dwc2_dump_host_registers(hsotg); | |
1991 | dev_dbg(hsotg->dev, | |
1992 | "************************************************************\n"); | |
1993 | dev_dbg(hsotg->dev, "\n"); | |
1994 | #endif | |
1995 | } | |
1996 | ||
1997 | /* | |
1998 | * NOTE: This function will be removed once the peripheral controller code | |
1999 | * is integrated and the driver is stable | |
2000 | */ | |
2001 | void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg) | |
2002 | { | |
2003 | #ifdef DWC2_DUMP_FRREM | |
2004 | dev_dbg(hsotg->dev, "Frame remaining at SOF:\n"); | |
2005 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2006 | hsotg->frrem_samples, hsotg->frrem_accum, | |
2007 | hsotg->frrem_samples > 0 ? | |
2008 | hsotg->frrem_accum / hsotg->frrem_samples : 0); | |
2009 | dev_dbg(hsotg->dev, "\n"); | |
2010 | dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 7):\n"); | |
2011 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2012 | hsotg->hfnum_7_samples, | |
2013 | hsotg->hfnum_7_frrem_accum, | |
2014 | hsotg->hfnum_7_samples > 0 ? | |
2015 | hsotg->hfnum_7_frrem_accum / hsotg->hfnum_7_samples : 0); | |
2016 | dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 0):\n"); | |
2017 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2018 | hsotg->hfnum_0_samples, | |
2019 | hsotg->hfnum_0_frrem_accum, | |
2020 | hsotg->hfnum_0_samples > 0 ? | |
2021 | hsotg->hfnum_0_frrem_accum / hsotg->hfnum_0_samples : 0); | |
2022 | dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 1-6):\n"); | |
2023 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2024 | hsotg->hfnum_other_samples, | |
2025 | hsotg->hfnum_other_frrem_accum, | |
2026 | hsotg->hfnum_other_samples > 0 ? | |
2027 | hsotg->hfnum_other_frrem_accum / hsotg->hfnum_other_samples : | |
2028 | 0); | |
2029 | dev_dbg(hsotg->dev, "\n"); | |
2030 | dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 7):\n"); | |
2031 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2032 | hsotg->hfnum_7_samples_a, hsotg->hfnum_7_frrem_accum_a, | |
2033 | hsotg->hfnum_7_samples_a > 0 ? | |
2034 | hsotg->hfnum_7_frrem_accum_a / hsotg->hfnum_7_samples_a : 0); | |
2035 | dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 0):\n"); | |
2036 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2037 | hsotg->hfnum_0_samples_a, hsotg->hfnum_0_frrem_accum_a, | |
2038 | hsotg->hfnum_0_samples_a > 0 ? | |
2039 | hsotg->hfnum_0_frrem_accum_a / hsotg->hfnum_0_samples_a : 0); | |
2040 | dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 1-6):\n"); | |
2041 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2042 | hsotg->hfnum_other_samples_a, hsotg->hfnum_other_frrem_accum_a, | |
2043 | hsotg->hfnum_other_samples_a > 0 ? | |
2044 | hsotg->hfnum_other_frrem_accum_a / hsotg->hfnum_other_samples_a | |
2045 | : 0); | |
2046 | dev_dbg(hsotg->dev, "\n"); | |
2047 | dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 7):\n"); | |
2048 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2049 | hsotg->hfnum_7_samples_b, hsotg->hfnum_7_frrem_accum_b, | |
2050 | hsotg->hfnum_7_samples_b > 0 ? | |
2051 | hsotg->hfnum_7_frrem_accum_b / hsotg->hfnum_7_samples_b : 0); | |
2052 | dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 0):\n"); | |
2053 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2054 | hsotg->hfnum_0_samples_b, hsotg->hfnum_0_frrem_accum_b, | |
2055 | (hsotg->hfnum_0_samples_b > 0) ? | |
2056 | hsotg->hfnum_0_frrem_accum_b / hsotg->hfnum_0_samples_b : 0); | |
2057 | dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 1-6):\n"); | |
2058 | dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", | |
2059 | hsotg->hfnum_other_samples_b, hsotg->hfnum_other_frrem_accum_b, | |
2060 | (hsotg->hfnum_other_samples_b > 0) ? | |
2061 | hsotg->hfnum_other_frrem_accum_b / hsotg->hfnum_other_samples_b | |
2062 | : 0); | |
2063 | #endif | |
2064 | } | |
2065 | ||
2066 | struct wrapper_priv_data { | |
2067 | struct dwc2_hsotg *hsotg; | |
2068 | }; | |
2069 | ||
2070 | /* Gets the dwc2_hsotg from a usb_hcd */ | |
2071 | static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) | |
2072 | { | |
2073 | struct wrapper_priv_data *p; | |
2074 | ||
2075 | p = (struct wrapper_priv_data *) &hcd->hcd_priv; | |
2076 | return p->hsotg; | |
2077 | } | |
2078 | ||
2079 | static int _dwc2_hcd_start(struct usb_hcd *hcd); | |
2080 | ||
2081 | void dwc2_host_start(struct dwc2_hsotg *hsotg) | |
2082 | { | |
2083 | struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); | |
2084 | ||
2085 | hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); | |
2086 | _dwc2_hcd_start(hcd); | |
2087 | } | |
2088 | ||
2089 | void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) | |
2090 | { | |
2091 | struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); | |
2092 | ||
2093 | hcd->self.is_b_host = 0; | |
2094 | } | |
2095 | ||
2096 | void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr, | |
2097 | int *hub_port) | |
2098 | { | |
2099 | struct urb *urb = context; | |
2100 | ||
2101 | if (urb->dev->tt) | |
2102 | *hub_addr = urb->dev->tt->hub->devnum; | |
2103 | else | |
2104 | *hub_addr = 0; | |
2105 | *hub_port = urb->dev->ttport; | |
2106 | } | |
2107 | ||
2108 | int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) | |
2109 | { | |
2110 | struct urb *urb = context; | |
2111 | ||
2112 | return urb->dev->speed; | |
2113 | } | |
2114 | ||
2115 | static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, | |
2116 | struct urb *urb) | |
2117 | { | |
2118 | struct usb_bus *bus = hcd_to_bus(hcd); | |
2119 | ||
2120 | if (urb->interval) | |
2121 | bus->bandwidth_allocated += bw / urb->interval; | |
2122 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) | |
2123 | bus->bandwidth_isoc_reqs++; | |
2124 | else | |
2125 | bus->bandwidth_int_reqs++; | |
2126 | } | |
2127 | ||
2128 | static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, | |
2129 | struct urb *urb) | |
2130 | { | |
2131 | struct usb_bus *bus = hcd_to_bus(hcd); | |
2132 | ||
2133 | if (urb->interval) | |
2134 | bus->bandwidth_allocated -= bw / urb->interval; | |
2135 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) | |
2136 | bus->bandwidth_isoc_reqs--; | |
2137 | else | |
2138 | bus->bandwidth_int_reqs--; | |
2139 | } | |
2140 | ||
2141 | /* | |
2142 | * Sets the final status of an URB and returns it to the upper layer. Any | |
2143 | * required cleanup of the URB is performed. | |
2144 | * | |
2145 | * Must be called with interrupt disabled and spinlock held | |
2146 | */ | |
0d012b98 PZ |
2147 | void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, |
2148 | int status) | |
7359d482 | 2149 | { |
0d012b98 | 2150 | struct urb *urb; |
7359d482 PZ |
2151 | int i; |
2152 | ||
0d012b98 PZ |
2153 | if (!qtd) { |
2154 | dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); | |
7359d482 PZ |
2155 | return; |
2156 | } | |
2157 | ||
0d012b98 PZ |
2158 | if (!qtd->urb) { |
2159 | dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); | |
7359d482 PZ |
2160 | return; |
2161 | } | |
2162 | ||
0d012b98 PZ |
2163 | urb = qtd->urb->priv; |
2164 | if (!urb) { | |
2165 | dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); | |
2166 | return; | |
2167 | } | |
2168 | ||
2169 | urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); | |
7359d482 | 2170 | |
b49977a6 MK |
2171 | if (dbg_urb(urb)) |
2172 | dev_vdbg(hsotg->dev, | |
2173 | "%s: urb %p device %d ep %d-%s status %d actual %d\n", | |
2174 | __func__, urb, usb_pipedevice(urb->pipe), | |
2175 | usb_pipeendpoint(urb->pipe), | |
2176 | usb_pipein(urb->pipe) ? "IN" : "OUT", status, | |
2177 | urb->actual_length); | |
7359d482 | 2178 | |
b49977a6 | 2179 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { |
7359d482 PZ |
2180 | for (i = 0; i < urb->number_of_packets; i++) |
2181 | dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", | |
2182 | i, urb->iso_frame_desc[i].status); | |
2183 | } | |
2184 | ||
2185 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { | |
0d012b98 | 2186 | urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); |
7359d482 PZ |
2187 | for (i = 0; i < urb->number_of_packets; ++i) { |
2188 | urb->iso_frame_desc[i].actual_length = | |
2189 | dwc2_hcd_urb_get_iso_desc_actual_length( | |
0d012b98 | 2190 | qtd->urb, i); |
7359d482 | 2191 | urb->iso_frame_desc[i].status = |
0d012b98 | 2192 | dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); |
7359d482 PZ |
2193 | } |
2194 | } | |
2195 | ||
2196 | urb->status = status; | |
7359d482 PZ |
2197 | if (!status) { |
2198 | if ((urb->transfer_flags & URB_SHORT_NOT_OK) && | |
2199 | urb->actual_length < urb->transfer_buffer_length) | |
2200 | urb->status = -EREMOTEIO; | |
2201 | } | |
2202 | ||
2203 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || | |
2204 | usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { | |
2205 | struct usb_host_endpoint *ep = urb->ep; | |
2206 | ||
2207 | if (ep) | |
2208 | dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), | |
2209 | dwc2_hcd_get_ep_bandwidth(hsotg, ep), | |
2210 | urb); | |
2211 | } | |
2212 | ||
c9e1c907 | 2213 | usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); |
0d012b98 PZ |
2214 | urb->hcpriv = NULL; |
2215 | kfree(qtd->urb); | |
2216 | qtd->urb = NULL; | |
7359d482 PZ |
2217 | |
2218 | spin_unlock(&hsotg->lock); | |
2219 | usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); | |
2220 | spin_lock(&hsotg->lock); | |
2221 | } | |
2222 | ||
2223 | /* | |
2224 | * Work queue function for starting the HCD when A-Cable is connected | |
2225 | */ | |
2226 | static void dwc2_hcd_start_func(struct work_struct *work) | |
2227 | { | |
2228 | struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, | |
2229 | start_work.work); | |
2230 | ||
2231 | dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); | |
2232 | dwc2_host_start(hsotg); | |
2233 | } | |
2234 | ||
2235 | /* | |
2236 | * Reset work queue function | |
2237 | */ | |
2238 | static void dwc2_hcd_reset_func(struct work_struct *work) | |
2239 | { | |
2240 | struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, | |
2241 | reset_work.work); | |
2242 | u32 hprt0; | |
2243 | ||
2244 | dev_dbg(hsotg->dev, "USB RESET function called\n"); | |
2245 | hprt0 = dwc2_read_hprt0(hsotg); | |
2246 | hprt0 &= ~HPRT0_RST; | |
2247 | writel(hprt0, hsotg->regs + HPRT0); | |
2248 | hsotg->flags.b.port_reset_change = 1; | |
2249 | } | |
2250 | ||
2251 | /* | |
2252 | * ========================================================================= | |
2253 | * Linux HC Driver Functions | |
2254 | * ========================================================================= | |
2255 | */ | |
2256 | ||
2257 | /* | |
2258 | * Initializes the DWC_otg controller and its root hub and prepares it for host | |
2259 | * mode operation. Activates the root port. Returns 0 on success and a negative | |
2260 | * error code on failure. | |
2261 | */ | |
2262 | static int _dwc2_hcd_start(struct usb_hcd *hcd) | |
2263 | { | |
2264 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2265 | struct usb_bus *bus = hcd_to_bus(hcd); | |
2266 | unsigned long flags; | |
2267 | ||
2268 | dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); | |
2269 | ||
2270 | spin_lock_irqsave(&hsotg->lock, flags); | |
2271 | ||
2272 | hcd->state = HC_STATE_RUNNING; | |
2273 | ||
2274 | if (dwc2_is_device_mode(hsotg)) { | |
2275 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2276 | return 0; /* why 0 ?? */ | |
2277 | } | |
2278 | ||
2279 | dwc2_hcd_reinit(hsotg); | |
2280 | ||
2281 | /* Initialize and connect root hub if one is not already attached */ | |
2282 | if (bus->root_hub) { | |
2283 | dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); | |
2284 | /* Inform the HUB driver to resume */ | |
2285 | usb_hcd_resume_root_hub(hcd); | |
2286 | } | |
2287 | ||
2288 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2289 | return 0; | |
2290 | } | |
2291 | ||
2292 | /* | |
2293 | * Halts the DWC_otg host mode operations in a clean manner. USB transfers are | |
2294 | * stopped. | |
2295 | */ | |
2296 | static void _dwc2_hcd_stop(struct usb_hcd *hcd) | |
2297 | { | |
2298 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2299 | unsigned long flags; | |
2300 | ||
2301 | spin_lock_irqsave(&hsotg->lock, flags); | |
2302 | dwc2_hcd_stop(hsotg); | |
2303 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2304 | ||
2305 | usleep_range(1000, 3000); | |
2306 | } | |
2307 | ||
2308 | /* Returns the current frame number */ | |
2309 | static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) | |
2310 | { | |
2311 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2312 | ||
2313 | return dwc2_hcd_get_frame_number(hsotg); | |
2314 | } | |
2315 | ||
2316 | static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, | |
2317 | char *fn_name) | |
2318 | { | |
2319 | #ifdef VERBOSE_DEBUG | |
2320 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2321 | char *pipetype; | |
2322 | char *speed; | |
2323 | ||
2324 | dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); | |
2325 | dev_vdbg(hsotg->dev, " Device address: %d\n", | |
2326 | usb_pipedevice(urb->pipe)); | |
2327 | dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", | |
2328 | usb_pipeendpoint(urb->pipe), | |
2329 | usb_pipein(urb->pipe) ? "IN" : "OUT"); | |
2330 | ||
2331 | switch (usb_pipetype(urb->pipe)) { | |
2332 | case PIPE_CONTROL: | |
2333 | pipetype = "CONTROL"; | |
2334 | break; | |
2335 | case PIPE_BULK: | |
2336 | pipetype = "BULK"; | |
2337 | break; | |
2338 | case PIPE_INTERRUPT: | |
2339 | pipetype = "INTERRUPT"; | |
2340 | break; | |
2341 | case PIPE_ISOCHRONOUS: | |
2342 | pipetype = "ISOCHRONOUS"; | |
2343 | break; | |
2344 | default: | |
2345 | pipetype = "UNKNOWN"; | |
2346 | break; | |
2347 | } | |
2348 | ||
2349 | dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, | |
2350 | usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? | |
2351 | "IN" : "OUT"); | |
2352 | ||
2353 | switch (urb->dev->speed) { | |
2354 | case USB_SPEED_HIGH: | |
2355 | speed = "HIGH"; | |
2356 | break; | |
2357 | case USB_SPEED_FULL: | |
2358 | speed = "FULL"; | |
2359 | break; | |
2360 | case USB_SPEED_LOW: | |
2361 | speed = "LOW"; | |
2362 | break; | |
2363 | default: | |
2364 | speed = "UNKNOWN"; | |
2365 | break; | |
2366 | } | |
2367 | ||
2368 | dev_vdbg(hsotg->dev, " Speed: %s\n", speed); | |
2369 | dev_vdbg(hsotg->dev, " Max packet size: %d\n", | |
2370 | usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); | |
2371 | dev_vdbg(hsotg->dev, " Data buffer length: %d\n", | |
2372 | urb->transfer_buffer_length); | |
157dfaac PZ |
2373 | dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", |
2374 | urb->transfer_buffer, (unsigned long)urb->transfer_dma); | |
2375 | dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", | |
2376 | urb->setup_packet, (unsigned long)urb->setup_dma); | |
7359d482 PZ |
2377 | dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); |
2378 | ||
2379 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { | |
2380 | int i; | |
2381 | ||
2382 | for (i = 0; i < urb->number_of_packets; i++) { | |
2383 | dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); | |
2384 | dev_vdbg(hsotg->dev, " offset: %d, length %d\n", | |
2385 | urb->iso_frame_desc[i].offset, | |
2386 | urb->iso_frame_desc[i].length); | |
2387 | } | |
2388 | } | |
2389 | #endif | |
2390 | } | |
2391 | ||
2392 | /* | |
2393 | * Starts processing a USB transfer request specified by a USB Request Block | |
2394 | * (URB). mem_flags indicates the type of memory allocation to use while | |
2395 | * processing this URB. | |
2396 | */ | |
2397 | static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, | |
2398 | gfp_t mem_flags) | |
2399 | { | |
2400 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2401 | struct usb_host_endpoint *ep = urb->ep; | |
2402 | struct dwc2_hcd_urb *dwc2_urb; | |
2403 | int i; | |
c9e1c907 | 2404 | int retval; |
7359d482 | 2405 | int alloc_bandwidth = 0; |
7359d482 PZ |
2406 | u8 ep_type = 0; |
2407 | u32 tflags = 0; | |
2408 | void *buf; | |
2409 | unsigned long flags; | |
2410 | ||
b49977a6 MK |
2411 | if (dbg_urb(urb)) { |
2412 | dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); | |
2413 | dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); | |
2414 | } | |
7359d482 PZ |
2415 | |
2416 | if (ep == NULL) | |
2417 | return -EINVAL; | |
2418 | ||
2419 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || | |
2420 | usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { | |
2421 | spin_lock_irqsave(&hsotg->lock, flags); | |
2422 | if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) | |
2423 | alloc_bandwidth = 1; | |
2424 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2425 | } | |
2426 | ||
2427 | switch (usb_pipetype(urb->pipe)) { | |
2428 | case PIPE_CONTROL: | |
2429 | ep_type = USB_ENDPOINT_XFER_CONTROL; | |
2430 | break; | |
2431 | case PIPE_ISOCHRONOUS: | |
2432 | ep_type = USB_ENDPOINT_XFER_ISOC; | |
2433 | break; | |
2434 | case PIPE_BULK: | |
2435 | ep_type = USB_ENDPOINT_XFER_BULK; | |
2436 | break; | |
2437 | case PIPE_INTERRUPT: | |
2438 | ep_type = USB_ENDPOINT_XFER_INT; | |
2439 | break; | |
2440 | default: | |
2441 | dev_warn(hsotg->dev, "Wrong ep type\n"); | |
2442 | } | |
2443 | ||
2444 | dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, | |
2445 | mem_flags); | |
2446 | if (!dwc2_urb) | |
2447 | return -ENOMEM; | |
2448 | ||
2449 | dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), | |
2450 | usb_pipeendpoint(urb->pipe), ep_type, | |
2451 | usb_pipein(urb->pipe), | |
2452 | usb_maxpacket(urb->dev, urb->pipe, | |
2453 | !(usb_pipein(urb->pipe)))); | |
2454 | ||
2455 | buf = urb->transfer_buffer; | |
25a49445 | 2456 | |
7359d482 | 2457 | if (hcd->self.uses_dma) { |
25a49445 PZ |
2458 | if (!buf && (urb->transfer_dma & 3)) { |
2459 | dev_err(hsotg->dev, | |
2460 | "%s: unaligned transfer with no transfer_buffer", | |
2461 | __func__); | |
2462 | retval = -EINVAL; | |
2463 | goto fail1; | |
2464 | } | |
7359d482 PZ |
2465 | } |
2466 | ||
2467 | if (!(urb->transfer_flags & URB_NO_INTERRUPT)) | |
2468 | tflags |= URB_GIVEBACK_ASAP; | |
2469 | if (urb->transfer_flags & URB_ZERO_PACKET) | |
2470 | tflags |= URB_SEND_ZERO_PACKET; | |
2471 | ||
2472 | dwc2_urb->priv = urb; | |
2473 | dwc2_urb->buf = buf; | |
2474 | dwc2_urb->dma = urb->transfer_dma; | |
2475 | dwc2_urb->length = urb->transfer_buffer_length; | |
2476 | dwc2_urb->setup_packet = urb->setup_packet; | |
2477 | dwc2_urb->setup_dma = urb->setup_dma; | |
2478 | dwc2_urb->flags = tflags; | |
2479 | dwc2_urb->interval = urb->interval; | |
2480 | dwc2_urb->status = -EINPROGRESS; | |
2481 | ||
2482 | for (i = 0; i < urb->number_of_packets; ++i) | |
2483 | dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, | |
2484 | urb->iso_frame_desc[i].offset, | |
2485 | urb->iso_frame_desc[i].length); | |
2486 | ||
2487 | urb->hcpriv = dwc2_urb; | |
c9e1c907 PZ |
2488 | |
2489 | spin_lock_irqsave(&hsotg->lock, flags); | |
2490 | retval = usb_hcd_link_urb_to_ep(hcd, urb); | |
2491 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2492 | if (retval) | |
2493 | goto fail1; | |
2494 | ||
2495 | retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv, mem_flags); | |
2496 | if (retval) | |
2497 | goto fail2; | |
2498 | ||
2499 | if (alloc_bandwidth) { | |
2500 | spin_lock_irqsave(&hsotg->lock, flags); | |
2501 | dwc2_allocate_bus_bandwidth(hcd, | |
2502 | dwc2_hcd_get_ep_bandwidth(hsotg, ep), | |
2503 | urb); | |
2504 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
7359d482 PZ |
2505 | } |
2506 | ||
c9e1c907 PZ |
2507 | return 0; |
2508 | ||
2509 | fail2: | |
2510 | spin_lock_irqsave(&hsotg->lock, flags); | |
2511 | dwc2_urb->priv = NULL; | |
2512 | usb_hcd_unlink_urb_from_ep(hcd, urb); | |
2513 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2514 | fail1: | |
2515 | urb->hcpriv = NULL; | |
2516 | kfree(dwc2_urb); | |
2517 | ||
7359d482 PZ |
2518 | return retval; |
2519 | } | |
2520 | ||
2521 | /* | |
2522 | * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. | |
2523 | */ | |
2524 | static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, | |
2525 | int status) | |
2526 | { | |
2527 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
c9e1c907 | 2528 | int rc; |
7359d482 PZ |
2529 | unsigned long flags; |
2530 | ||
2531 | dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); | |
2532 | dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); | |
2533 | ||
2534 | spin_lock_irqsave(&hsotg->lock, flags); | |
2535 | ||
c9e1c907 PZ |
2536 | rc = usb_hcd_check_unlink_urb(hcd, urb, status); |
2537 | if (rc) | |
2538 | goto out; | |
2539 | ||
7359d482 PZ |
2540 | if (!urb->hcpriv) { |
2541 | dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); | |
2542 | goto out; | |
2543 | } | |
2544 | ||
2545 | rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); | |
2546 | ||
c9e1c907 PZ |
2547 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
2548 | ||
7359d482 PZ |
2549 | kfree(urb->hcpriv); |
2550 | urb->hcpriv = NULL; | |
2551 | ||
2552 | /* Higher layer software sets URB status */ | |
2553 | spin_unlock(&hsotg->lock); | |
2554 | usb_hcd_giveback_urb(hcd, urb, status); | |
2555 | spin_lock(&hsotg->lock); | |
2556 | ||
2557 | dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); | |
2558 | dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); | |
2559 | out: | |
2560 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2561 | ||
2562 | return rc; | |
2563 | } | |
2564 | ||
2565 | /* | |
2566 | * Frees resources in the DWC_otg controller related to a given endpoint. Also | |
2567 | * clears state in the HCD related to the endpoint. Any URBs for the endpoint | |
2568 | * must already be dequeued. | |
2569 | */ | |
2570 | static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, | |
2571 | struct usb_host_endpoint *ep) | |
2572 | { | |
2573 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2574 | ||
2575 | dev_dbg(hsotg->dev, | |
2576 | "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", | |
2577 | ep->desc.bEndpointAddress, ep->hcpriv); | |
2578 | dwc2_hcd_endpoint_disable(hsotg, ep, 250); | |
2579 | } | |
2580 | ||
2581 | /* | |
2582 | * Resets endpoint specific parameter values, in current version used to reset | |
2583 | * the data toggle (as a WA). This function can be called from usb_clear_halt | |
2584 | * routine. | |
2585 | */ | |
2586 | static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, | |
2587 | struct usb_host_endpoint *ep) | |
2588 | { | |
2589 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
7359d482 PZ |
2590 | unsigned long flags; |
2591 | ||
2592 | dev_dbg(hsotg->dev, | |
2593 | "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", | |
2594 | ep->desc.bEndpointAddress); | |
2595 | ||
7359d482 | 2596 | spin_lock_irqsave(&hsotg->lock, flags); |
7359d482 | 2597 | dwc2_hcd_endpoint_reset(hsotg, ep); |
7359d482 PZ |
2598 | spin_unlock_irqrestore(&hsotg->lock, flags); |
2599 | } | |
2600 | ||
2601 | /* | |
2602 | * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if | |
2603 | * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid | |
2604 | * interrupt. | |
2605 | * | |
2606 | * This function is called by the USB core when an interrupt occurs | |
2607 | */ | |
2608 | static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) | |
2609 | { | |
2610 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
7359d482 | 2611 | |
ca18f4a6 | 2612 | return dwc2_handle_hcd_intr(hsotg); |
7359d482 PZ |
2613 | } |
2614 | ||
2615 | /* | |
2616 | * Creates Status Change bitmap for the root hub and root port. The bitmap is | |
2617 | * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 | |
2618 | * is the status change indicator for the single root port. Returns 1 if either | |
2619 | * change indicator is 1, otherwise returns 0. | |
2620 | */ | |
2621 | static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) | |
2622 | { | |
2623 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2624 | ||
2625 | buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; | |
2626 | return buf[0] != 0; | |
2627 | } | |
2628 | ||
2629 | /* Handles hub class-specific requests */ | |
2630 | static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, | |
2631 | u16 windex, char *buf, u16 wlength) | |
2632 | { | |
2633 | int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, | |
2634 | wvalue, windex, buf, wlength); | |
2635 | return retval; | |
2636 | } | |
2637 | ||
2638 | /* Handles hub TT buffer clear completions */ | |
2639 | static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, | |
2640 | struct usb_host_endpoint *ep) | |
2641 | { | |
2642 | struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); | |
2643 | struct dwc2_qh *qh; | |
2644 | unsigned long flags; | |
2645 | ||
2646 | qh = ep->hcpriv; | |
2647 | if (!qh) | |
2648 | return; | |
2649 | ||
2650 | spin_lock_irqsave(&hsotg->lock, flags); | |
2651 | qh->tt_buffer_dirty = 0; | |
2652 | ||
2653 | if (hsotg->flags.b.port_connect_status) | |
2654 | dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); | |
2655 | ||
2656 | spin_unlock_irqrestore(&hsotg->lock, flags); | |
2657 | } | |
2658 | ||
2659 | static struct hc_driver dwc2_hc_driver = { | |
2660 | .description = "dwc2_hsotg", | |
2661 | .product_desc = "DWC OTG Controller", | |
2662 | .hcd_priv_size = sizeof(struct wrapper_priv_data), | |
2663 | ||
2664 | .irq = _dwc2_hcd_irq, | |
2665 | .flags = HCD_MEMORY | HCD_USB2, | |
2666 | ||
2667 | .start = _dwc2_hcd_start, | |
2668 | .stop = _dwc2_hcd_stop, | |
2669 | .urb_enqueue = _dwc2_hcd_urb_enqueue, | |
2670 | .urb_dequeue = _dwc2_hcd_urb_dequeue, | |
2671 | .endpoint_disable = _dwc2_hcd_endpoint_disable, | |
2672 | .endpoint_reset = _dwc2_hcd_endpoint_reset, | |
2673 | .get_frame_number = _dwc2_hcd_get_frame_number, | |
2674 | ||
2675 | .hub_status_data = _dwc2_hcd_hub_status_data, | |
2676 | .hub_control = _dwc2_hcd_hub_control, | |
2677 | .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, | |
2678 | }; | |
2679 | ||
2680 | /* | |
2681 | * Frees secondary storage associated with the dwc2_hsotg structure contained | |
2682 | * in the struct usb_hcd field | |
2683 | */ | |
2684 | static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) | |
2685 | { | |
2686 | u32 ahbcfg; | |
2687 | u32 dctl; | |
2688 | int i; | |
2689 | ||
2690 | dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); | |
2691 | ||
2692 | /* Free memory for QH/QTD lists */ | |
2693 | dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); | |
2694 | dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); | |
2695 | dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); | |
2696 | dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); | |
2697 | dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); | |
2698 | dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); | |
2699 | ||
2700 | /* Free memory for the host channels */ | |
2701 | for (i = 0; i < MAX_EPS_CHANNELS; i++) { | |
2702 | struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; | |
2703 | ||
2704 | if (chan != NULL) { | |
2705 | dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", | |
2706 | i, chan); | |
2707 | hsotg->hc_ptr_array[i] = NULL; | |
2708 | kfree(chan); | |
2709 | } | |
2710 | } | |
2711 | ||
2712 | if (hsotg->core_params->dma_enable > 0) { | |
2713 | if (hsotg->status_buf) { | |
2714 | dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, | |
2715 | hsotg->status_buf, | |
2716 | hsotg->status_buf_dma); | |
2717 | hsotg->status_buf = NULL; | |
2718 | } | |
2719 | } else { | |
2720 | kfree(hsotg->status_buf); | |
2721 | hsotg->status_buf = NULL; | |
2722 | } | |
2723 | ||
2724 | ahbcfg = readl(hsotg->regs + GAHBCFG); | |
2725 | ||
2726 | /* Disable all interrupts */ | |
2727 | ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; | |
2728 | writel(ahbcfg, hsotg->regs + GAHBCFG); | |
2729 | writel(0, hsotg->regs + GINTMSK); | |
2730 | ||
9badec2f | 2731 | if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { |
7359d482 PZ |
2732 | dctl = readl(hsotg->regs + DCTL); |
2733 | dctl |= DCTL_SFTDISCON; | |
2734 | writel(dctl, hsotg->regs + DCTL); | |
2735 | } | |
2736 | ||
2737 | if (hsotg->wq_otg) { | |
2738 | if (!cancel_work_sync(&hsotg->wf_otg)) | |
2739 | flush_workqueue(hsotg->wq_otg); | |
2740 | destroy_workqueue(hsotg->wq_otg); | |
2741 | } | |
2742 | ||
2743 | kfree(hsotg->core_params); | |
2744 | hsotg->core_params = NULL; | |
2745 | del_timer(&hsotg->wkp_timer); | |
2746 | } | |
2747 | ||
2748 | static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) | |
2749 | { | |
2750 | /* Turn off all host-specific interrupts */ | |
2751 | dwc2_disable_host_interrupts(hsotg); | |
2752 | ||
2753 | dwc2_hcd_free(hsotg); | |
2754 | } | |
2755 | ||
8284f93b MK |
2756 | /* |
2757 | * Sets all parameters to the given value. | |
2758 | * | |
2759 | * Assumes that the dwc2_core_params struct contains only integers. | |
2760 | */ | |
2761 | void dwc2_set_all_params(struct dwc2_core_params *params, int value) | |
7359d482 | 2762 | { |
8284f93b MK |
2763 | int *p = (int *)params; |
2764 | size_t size = sizeof(*params) / sizeof(*p); | |
7359d482 PZ |
2765 | int i; |
2766 | ||
2767 | for (i = 0; i < size; i++) | |
b39ed5c7 | 2768 | p[i] = value; |
7359d482 | 2769 | } |
5b9974b1 | 2770 | EXPORT_SYMBOL_GPL(dwc2_set_all_params); |
7359d482 PZ |
2771 | |
2772 | /* | |
2773 | * Initializes the HCD. This function allocates memory for and initializes the | |
2774 | * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the | |
2775 | * USB bus with the core and calls the hc_driver->start() function. It returns | |
2776 | * a negative error on failure. | |
2777 | */ | |
e62662c7 | 2778 | int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, |
90dbceaf | 2779 | const struct dwc2_core_params *params) |
7359d482 PZ |
2780 | { |
2781 | struct usb_hcd *hcd; | |
2782 | struct dwc2_host_chan *channel; | |
9badec2f | 2783 | u32 hcfg; |
7359d482 | 2784 | int i, num_channels; |
9badec2f | 2785 | int retval; |
7359d482 | 2786 | |
f5500ecc DN |
2787 | if (usb_disabled()) |
2788 | return -ENODEV; | |
2789 | ||
e62662c7 | 2790 | dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); |
7359d482 | 2791 | |
9badec2f MK |
2792 | /* Detect config values from hardware */ |
2793 | retval = dwc2_get_hwparams(hsotg); | |
7359d482 | 2794 | |
9badec2f MK |
2795 | if (retval) |
2796 | return retval; | |
2797 | ||
2798 | retval = -ENOMEM; | |
7359d482 PZ |
2799 | |
2800 | hcfg = readl(hsotg->regs + HCFG); | |
2801 | dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); | |
7359d482 PZ |
2802 | |
2803 | #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS | |
2804 | hsotg->frame_num_array = kzalloc(sizeof(*hsotg->frame_num_array) * | |
2805 | FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); | |
2806 | if (!hsotg->frame_num_array) | |
ba0e60d1 | 2807 | goto error1; |
7359d482 PZ |
2808 | hsotg->last_frame_num_array = kzalloc( |
2809 | sizeof(*hsotg->last_frame_num_array) * | |
2810 | FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); | |
2811 | if (!hsotg->last_frame_num_array) | |
ba0e60d1 | 2812 | goto error1; |
7359d482 PZ |
2813 | hsotg->last_frame_num = HFNUM_MAX_FRNUM; |
2814 | #endif | |
2815 | ||
2816 | hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL); | |
2817 | if (!hsotg->core_params) | |
ba0e60d1 | 2818 | goto error1; |
7359d482 | 2819 | |
8284f93b | 2820 | dwc2_set_all_params(hsotg->core_params, -1); |
7359d482 PZ |
2821 | |
2822 | /* Validate parameter values */ | |
2823 | dwc2_set_parameters(hsotg, params); | |
2824 | ||
a0112f48 MK |
2825 | /* Check if the bus driver or platform code has setup a dma_mask */ |
2826 | if (hsotg->core_params->dma_enable > 0 && | |
2827 | hsotg->dev->dma_mask == NULL) { | |
2828 | dev_warn(hsotg->dev, | |
2829 | "dma_mask not set, disabling DMA\n"); | |
2830 | hsotg->core_params->dma_enable = 0; | |
2831 | hsotg->core_params->dma_desc_enable = 0; | |
2832 | } | |
2833 | ||
ba0e60d1 PZ |
2834 | /* Set device flags indicating whether the HCD supports DMA */ |
2835 | if (hsotg->core_params->dma_enable > 0) { | |
30885313 PZ |
2836 | if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) |
2837 | dev_warn(hsotg->dev, "can't set DMA mask\n"); | |
25a49445 PZ |
2838 | if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) |
2839 | dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); | |
ba0e60d1 PZ |
2840 | } |
2841 | ||
2842 | hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); | |
2843 | if (!hcd) | |
2844 | goto error1; | |
2845 | ||
7de76ee1 MK |
2846 | if (hsotg->core_params->dma_enable <= 0) |
2847 | hcd->self.uses_dma = 0; | |
2848 | ||
ba0e60d1 PZ |
2849 | hcd->has_tt = 1; |
2850 | ||
ba0e60d1 PZ |
2851 | ((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg; |
2852 | hsotg->priv = hcd; | |
2853 | ||
7359d482 PZ |
2854 | /* |
2855 | * Disable the global interrupt until all the interrupt handlers are | |
2856 | * installed | |
2857 | */ | |
2858 | dwc2_disable_global_interrupts(hsotg); | |
2859 | ||
6706c721 MK |
2860 | /* Initialize the DWC_otg core, and select the Phy type */ |
2861 | retval = dwc2_core_init(hsotg, true, irq); | |
2862 | if (retval) | |
2863 | goto error2; | |
2864 | ||
7359d482 | 2865 | /* Create new workqueue and init work */ |
53510352 | 2866 | retval = -ENOMEM; |
050232a7 | 2867 | hsotg->wq_otg = create_singlethread_workqueue("dwc2"); |
7359d482 PZ |
2868 | if (!hsotg->wq_otg) { |
2869 | dev_err(hsotg->dev, "Failed to create workqueue\n"); | |
2870 | goto error2; | |
2871 | } | |
2872 | INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); | |
2873 | ||
7359d482 PZ |
2874 | setup_timer(&hsotg->wkp_timer, dwc2_wakeup_detected, |
2875 | (unsigned long)hsotg); | |
2876 | ||
2877 | /* Initialize the non-periodic schedule */ | |
2878 | INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); | |
2879 | INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); | |
2880 | ||
2881 | /* Initialize the periodic schedule */ | |
2882 | INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); | |
2883 | INIT_LIST_HEAD(&hsotg->periodic_sched_ready); | |
2884 | INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); | |
2885 | INIT_LIST_HEAD(&hsotg->periodic_sched_queued); | |
2886 | ||
2887 | /* | |
2888 | * Create a host channel descriptor for each host channel implemented | |
2889 | * in the controller. Initialize the channel descriptor array. | |
2890 | */ | |
2891 | INIT_LIST_HEAD(&hsotg->free_hc_list); | |
2892 | num_channels = hsotg->core_params->host_channels; | |
2893 | memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); | |
2894 | ||
2895 | for (i = 0; i < num_channels; i++) { | |
2896 | channel = kzalloc(sizeof(*channel), GFP_KERNEL); | |
2897 | if (channel == NULL) | |
2898 | goto error3; | |
2899 | channel->hc_num = i; | |
2900 | hsotg->hc_ptr_array[i] = channel; | |
2901 | } | |
2902 | ||
20f2eb9c DC |
2903 | if (hsotg->core_params->uframe_sched > 0) |
2904 | dwc2_hcd_init_usecs(hsotg); | |
2905 | ||
7359d482 PZ |
2906 | /* Initialize hsotg start work */ |
2907 | INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); | |
2908 | ||
2909 | /* Initialize port reset work */ | |
2910 | INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); | |
2911 | ||
2912 | /* | |
2913 | * Allocate space for storing data on status transactions. Normally no | |
2914 | * data is sent, but this space acts as a bit bucket. This must be | |
2915 | * done after usb_add_hcd since that function allocates the DMA buffer | |
2916 | * pool. | |
2917 | */ | |
2918 | if (hsotg->core_params->dma_enable > 0) | |
2919 | hsotg->status_buf = dma_alloc_coherent(hsotg->dev, | |
2920 | DWC2_HCD_STATUS_BUF_SIZE, | |
2921 | &hsotg->status_buf_dma, GFP_KERNEL); | |
2922 | else | |
2923 | hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, | |
2924 | GFP_KERNEL); | |
2925 | ||
2926 | if (!hsotg->status_buf) | |
2927 | goto error3; | |
2928 | ||
2929 | hsotg->otg_port = 1; | |
2930 | hsotg->frame_list = NULL; | |
2931 | hsotg->frame_list_dma = 0; | |
2932 | hsotg->periodic_qh_count = 0; | |
2933 | ||
2934 | /* Initiate lx_state to L3 disconnected state */ | |
2935 | hsotg->lx_state = DWC2_L3; | |
2936 | ||
2937 | hcd->self.otg_port = hsotg->otg_port; | |
2938 | ||
2939 | /* Don't support SG list at this point */ | |
2940 | hcd->self.sg_tablesize = 0; | |
2941 | ||
2942 | /* | |
2943 | * Finish generic HCD initialization and start the HCD. This function | |
2944 | * allocates the DMA buffer pool, registers the USB bus, requests the | |
2945 | * IRQ line, and calls hcd_start method. | |
2946 | */ | |
66513f49 | 2947 | retval = usb_add_hcd(hcd, irq, IRQF_SHARED); |
7359d482 PZ |
2948 | if (retval < 0) |
2949 | goto error3; | |
2950 | ||
3c9740a1 PC |
2951 | device_wakeup_enable(hcd->self.controller); |
2952 | ||
7359d482 PZ |
2953 | dwc2_hcd_dump_state(hsotg); |
2954 | ||
2955 | dwc2_enable_global_interrupts(hsotg); | |
2956 | ||
2957 | return 0; | |
2958 | ||
2959 | error3: | |
2960 | dwc2_hcd_release(hsotg); | |
2961 | error2: | |
ba0e60d1 PZ |
2962 | usb_put_hcd(hcd); |
2963 | error1: | |
7359d482 PZ |
2964 | kfree(hsotg->core_params); |
2965 | ||
2966 | #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS | |
2967 | kfree(hsotg->last_frame_num_array); | |
2968 | kfree(hsotg->frame_num_array); | |
2969 | #endif | |
2970 | ||
e62662c7 | 2971 | dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); |
7359d482 PZ |
2972 | return retval; |
2973 | } | |
2974 | EXPORT_SYMBOL_GPL(dwc2_hcd_init); | |
2975 | ||
2976 | /* | |
2977 | * Removes the HCD. | |
2978 | * Frees memory and resources associated with the HCD and deregisters the bus. | |
2979 | */ | |
e62662c7 | 2980 | void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) |
7359d482 PZ |
2981 | { |
2982 | struct usb_hcd *hcd; | |
2983 | ||
e62662c7 | 2984 | dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); |
7359d482 PZ |
2985 | |
2986 | hcd = dwc2_hsotg_to_hcd(hsotg); | |
e62662c7 | 2987 | dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); |
7359d482 PZ |
2988 | |
2989 | if (!hcd) { | |
e62662c7 | 2990 | dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", |
7359d482 PZ |
2991 | __func__); |
2992 | return; | |
2993 | } | |
2994 | ||
2995 | usb_remove_hcd(hcd); | |
2996 | hsotg->priv = NULL; | |
2997 | dwc2_hcd_release(hsotg); | |
ba0e60d1 | 2998 | usb_put_hcd(hcd); |
7359d482 PZ |
2999 | |
3000 | #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS | |
3001 | kfree(hsotg->last_frame_num_array); | |
3002 | kfree(hsotg->frame_num_array); | |
3003 | #endif | |
7359d482 PZ |
3004 | } |
3005 | EXPORT_SYMBOL_GPL(dwc2_hcd_remove); |