]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Gadget support on a system involves | |
3 | # (a) a peripheral controller, and | |
4 | # (b) the gadget driver using it. | |
5 | # | |
6 | # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! | |
7 | # | |
8 | # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). | |
9 | # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). | |
cab00891 | 10 | # - Some systems have both kinds of controllers. |
1da177e4 LT |
11 | # |
12 | # With help from a special transceiver and a "Mini-AB" jack, systems with | |
13 | # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). | |
14 | # | |
15 | menu "USB Gadget Support" | |
16 | ||
17 | config USB_GADGET | |
18 | tristate "Support for USB Gadgets" | |
19 | help | |
20 | USB is a master/slave protocol, organized with one master | |
21 | host (such as a PC) controlling up to 127 peripheral devices. | |
22 | The USB hardware is asymmetric, which makes it easier to set up: | |
23 | you can't connect a "to-the-host" connector to a peripheral. | |
24 | ||
25 | Linux can run in the host, or in the peripheral. In both cases | |
26 | you need a low level bus controller driver, and some software | |
27 | talking to it. Peripheral controllers are often discrete silicon, | |
28 | or are integrated with the CPU in a microcontroller. The more | |
e113f29c | 29 | familiar host side controllers have names like "EHCI", "OHCI", |
1da177e4 LT |
30 | or "UHCI", and are usually integrated into southbridges on PC |
31 | motherboards. | |
32 | ||
33 | Enable this configuration option if you want to run Linux inside | |
34 | a USB peripheral device. Configure one hardware driver for your | |
35 | peripheral/device side bus controller, and a "gadget driver" for | |
36 | your peripheral protocol. (If you use modular gadget drivers, | |
37 | you may configure more than one.) | |
38 | ||
39 | If in doubt, say "N" and don't enable these drivers; most people | |
40 | don't have this kind of hardware (except maybe inside Linux PDAs). | |
41 | ||
42 | For more information, see <http://www.linux-usb.org/gadget> and | |
43 | the kernel DocBook documentation for this API. | |
44 | ||
70790f63 DB |
45 | config USB_GADGET_DEBUG |
46 | boolean "Debugging messages" | |
47 | depends on USB_GADGET && DEBUG_KERNEL && EXPERIMENTAL | |
48 | help | |
49 | Many controller and gadget drivers will print some debugging | |
50 | messages if you use this option to ask for those messages. | |
51 | ||
52 | Avoid enabling these messages, even if you're actively | |
53 | debugging such a driver. Many drivers will emit so many | |
54 | messages that the driver timings are affected, which will | |
55 | either create new failure modes or remove the one you're | |
56 | trying to track down. Never enable these messages for a | |
57 | production build. | |
58 | ||
1da177e4 LT |
59 | config USB_GADGET_DEBUG_FILES |
60 | boolean "Debugging information files" | |
61 | depends on USB_GADGET && PROC_FS | |
62 | help | |
63 | Some of the drivers in the "gadget" framework can expose | |
64 | debugging information in files such as /proc/driver/udc | |
65 | (for a peripheral controller). The information in these | |
66 | files may help when you're troubleshooting or bringing up a | |
67 | driver on a new board. Enable these files by choosing "Y" | |
68 | here. If in doubt, or to conserve kernel memory, say "N". | |
69 | ||
028b271b DB |
70 | config USB_GADGET_SELECTED |
71 | boolean | |
72 | ||
1da177e4 LT |
73 | # |
74 | # USB Peripheral Controller Support | |
75 | # | |
76 | choice | |
77 | prompt "USB Peripheral Controller" | |
78 | depends on USB_GADGET | |
79 | help | |
80 | A USB device uses a controller to talk to its host. | |
81 | Systems should have only one such upstream link. | |
82 | Many controller drivers are platform-specific; these | |
83 | often need board-specific hooks. | |
84 | ||
55d402d8 TD |
85 | config USB_GADGET_AMD5536UDC |
86 | boolean "AMD5536 UDC" | |
87 | depends on PCI | |
88 | select USB_GADGET_DUALSPEED | |
89 | help | |
90 | The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. | |
91 | It is a USB Highspeed DMA capable USB device controller. Beside ep0 | |
92 | it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). | |
93 | The UDC port supports OTG operation, and may be used as a host port | |
94 | if it's not being used to implement peripheral or OTG roles. | |
95 | ||
96 | Say "y" to link the driver statically, or "m" to build a | |
97 | dynamically linked module called "amd5536udc" and force all | |
98 | gadget drivers to also be dynamically linked. | |
99 | ||
100 | config USB_AMD5536UDC | |
101 | tristate | |
102 | depends on USB_GADGET_AMD5536UDC | |
103 | default USB_GADGET | |
104 | select USB_GADGET_SELECTED | |
105 | ||
b504882d LY |
106 | config USB_GADGET_FSL_USB2 |
107 | boolean "Freescale Highspeed USB DR Peripheral Controller" | |
108 | depends on MPC834x || PPC_MPC831x | |
109 | select USB_GADGET_DUALSPEED | |
110 | help | |
111 | Some of Freescale PowerPC processors have a High Speed | |
112 | Dual-Role(DR) USB controller, which supports device mode. | |
113 | ||
114 | The number of programmable endpoints is different through | |
115 | SOC revisions. | |
116 | ||
117 | Say "y" to link the driver statically, or "m" to build a | |
118 | dynamically linked module called "fsl_usb2_udc" and force | |
119 | all gadget drivers to also be dynamically linked. | |
120 | ||
121 | config USB_FSL_USB2 | |
122 | tristate | |
123 | depends on USB_GADGET_FSL_USB2 | |
124 | default USB_GADGET | |
125 | select USB_GADGET_SELECTED | |
126 | ||
1da177e4 | 127 | config USB_GADGET_NET2280 |
950ee4c8 | 128 | boolean "NetChip 228x" |
1da177e4 LT |
129 | depends on PCI |
130 | select USB_GADGET_DUALSPEED | |
131 | help | |
950ee4c8 | 132 | NetChip 2280 / 2282 is a PCI based USB peripheral controller which |
1da177e4 LT |
133 | supports both full and high speed USB 2.0 data transfers. |
134 | ||
135 | It has six configurable endpoints, as well as endpoint zero | |
136 | (for control transfers) and several endpoints with dedicated | |
137 | functions. | |
138 | ||
139 | Say "y" to link the driver statically, or "m" to build a | |
140 | dynamically linked module called "net2280" and force all | |
141 | gadget drivers to also be dynamically linked. | |
142 | ||
143 | config USB_NET2280 | |
144 | tristate | |
145 | depends on USB_GADGET_NET2280 | |
146 | default USB_GADGET | |
028b271b | 147 | select USB_GADGET_SELECTED |
1da177e4 LT |
148 | |
149 | config USB_GADGET_PXA2XX | |
150 | boolean "PXA 25x or IXP 4xx" | |
151 | depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX | |
152 | help | |
153 | Intel's PXA 25x series XScale ARM-5TE processors include | |
154 | an integrated full speed USB 1.1 device controller. The | |
155 | controller in the IXP 4xx series is register-compatible. | |
156 | ||
157 | It has fifteen fixed-function endpoints, as well as endpoint | |
158 | zero (for control transfers). | |
159 | ||
160 | Say "y" to link the driver statically, or "m" to build a | |
161 | dynamically linked module called "pxa2xx_udc" and force all | |
162 | gadget drivers to also be dynamically linked. | |
163 | ||
164 | config USB_PXA2XX | |
165 | tristate | |
166 | depends on USB_GADGET_PXA2XX | |
167 | default USB_GADGET | |
028b271b | 168 | select USB_GADGET_SELECTED |
1da177e4 LT |
169 | |
170 | # if there's only one gadget driver, using only two bulk endpoints, | |
171 | # don't waste memory for the other endpoints | |
172 | config USB_PXA2XX_SMALL | |
173 | depends on USB_GADGET_PXA2XX | |
174 | bool | |
175 | default n if USB_ETH_RNDIS | |
176 | default y if USB_ZERO | |
177 | default y if USB_ETH | |
178 | default y if USB_G_SERIAL | |
179 | ||
598f22e1 YS |
180 | config USB_GADGET_M66592 |
181 | boolean "Renesas M66592 USB Peripheral Controller" | |
182 | select USB_GADGET_DUALSPEED | |
183 | help | |
184 | M66592 is a discrete USB peripheral controller chip that | |
185 | supports both full and high speed USB 2.0 data transfers. | |
186 | It has seven configurable endpoints, and endpoint zero. | |
187 | ||
188 | Say "y" to link the driver statically, or "m" to build a | |
189 | dynamically linked module called "m66592_udc" and force all | |
190 | gadget drivers to also be dynamically linked. | |
191 | ||
192 | config USB_M66592 | |
193 | tristate | |
194 | depends on USB_GADGET_M66592 | |
195 | default USB_GADGET | |
196 | select USB_GADGET_SELECTED | |
197 | ||
1da177e4 LT |
198 | config USB_GADGET_GOKU |
199 | boolean "Toshiba TC86C001 'Goku-S'" | |
200 | depends on PCI | |
201 | help | |
202 | The Toshiba TC86C001 is a PCI device which includes controllers | |
203 | for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). | |
204 | ||
205 | The device controller has three configurable (bulk or interrupt) | |
206 | endpoints, plus endpoint zero (for control transfers). | |
207 | ||
208 | Say "y" to link the driver statically, or "m" to build a | |
209 | dynamically linked module called "goku_udc" and to force all | |
210 | gadget drivers to also be dynamically linked. | |
211 | ||
212 | config USB_GOKU | |
213 | tristate | |
214 | depends on USB_GADGET_GOKU | |
215 | default USB_GADGET | |
028b271b | 216 | select USB_GADGET_SELECTED |
1da177e4 LT |
217 | |
218 | ||
219 | config USB_GADGET_LH7A40X | |
220 | boolean "LH7A40X" | |
221 | depends on ARCH_LH7A40X | |
222 | help | |
223 | This driver provides USB Device Controller driver for LH7A40x | |
224 | ||
225 | config USB_LH7A40X | |
226 | tristate | |
227 | depends on USB_GADGET_LH7A40X | |
228 | default USB_GADGET | |
028b271b | 229 | select USB_GADGET_SELECTED |
1da177e4 LT |
230 | |
231 | ||
232 | config USB_GADGET_OMAP | |
233 | boolean "OMAP USB Device Controller" | |
234 | depends on ARCH_OMAP | |
235 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
236 | help | |
237 | Many Texas Instruments OMAP processors have flexible full | |
238 | speed USB device controllers, with support for up to 30 | |
239 | endpoints (plus endpoint zero). This driver supports the | |
240 | controller in the OMAP 1611, and should work with controllers | |
241 | in other OMAP processors too, given minor tweaks. | |
242 | ||
243 | Say "y" to link the driver statically, or "m" to build a | |
244 | dynamically linked module called "omap_udc" and force all | |
245 | gadget drivers to also be dynamically linked. | |
246 | ||
247 | config USB_OMAP | |
248 | tristate | |
249 | depends on USB_GADGET_OMAP | |
250 | default USB_GADGET | |
028b271b | 251 | select USB_GADGET_SELECTED |
1da177e4 LT |
252 | |
253 | config USB_OTG | |
254 | boolean "OTG Support" | |
255 | depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD | |
256 | help | |
257 | The most notable feature of USB OTG is support for a | |
258 | "Dual-Role" device, which can act as either a device | |
259 | or a host. The initial role choice can be changed | |
260 | later, when two dual-role devices talk to each other. | |
261 | ||
262 | Select this only if your OMAP board has a Mini-AB connector. | |
263 | ||
3fc154b6 AP |
264 | config USB_GADGET_S3C2410 |
265 | boolean "S3C2410 USB Device Controller" | |
266 | depends on ARCH_S3C2410 | |
267 | help | |
268 | Samsung's S3C2410 is an ARM-4 processor with an integrated | |
269 | full speed USB 1.1 device controller. It has 4 configurable | |
270 | endpoints, as well as endpoint zero (for control transfers). | |
271 | ||
272 | This driver has been tested on the S3C2410, S3C2412, and | |
273 | S3C2440 processors. | |
274 | ||
275 | config USB_S3C2410 | |
276 | tristate | |
277 | depends on USB_GADGET_S3C2410 | |
278 | default USB_GADGET | |
279 | select USB_GADGET_SELECTED | |
280 | ||
281 | config USB_S3C2410_DEBUG | |
282 | boolean "S3C2410 udc debug messages" | |
283 | depends on USB_GADGET_S3C2410 | |
284 | ||
bae4bd84 DB |
285 | config USB_GADGET_AT91 |
286 | boolean "AT91 USB Device Port" | |
877d7720 | 287 | depends on ARCH_AT91 && !ARCH_AT91SAM9RL |
bae4bd84 DB |
288 | select USB_GADGET_SELECTED |
289 | help | |
290 | Many Atmel AT91 processors (such as the AT91RM2000) have a | |
291 | full speed USB Device Port with support for five configurable | |
292 | endpoints (plus endpoint zero). | |
293 | ||
294 | Say "y" to link the driver statically, or "m" to build a | |
295 | dynamically linked module called "at91_udc" and force all | |
296 | gadget drivers to also be dynamically linked. | |
297 | ||
298 | config USB_AT91 | |
299 | tristate | |
300 | depends on USB_GADGET_AT91 | |
301 | default USB_GADGET | |
1da177e4 LT |
302 | |
303 | config USB_GADGET_DUMMY_HCD | |
304 | boolean "Dummy HCD (DEVELOPMENT)" | |
be0c8015 | 305 | depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL |
1da177e4 LT |
306 | select USB_GADGET_DUALSPEED |
307 | help | |
308 | This host controller driver emulates USB, looping all data transfer | |
309 | requests back to a USB "gadget driver" in the same host. The host | |
310 | side is the master; the gadget side is the slave. Gadget drivers | |
311 | can be high, full, or low speed; and they have access to endpoints | |
312 | like those from NET2280, PXA2xx, or SA1100 hardware. | |
313 | ||
314 | This may help in some stages of creating a driver to embed in a | |
315 | Linux device, since it lets you debug several parts of the gadget | |
316 | driver without its hardware or drivers being involved. | |
317 | ||
318 | Since such a gadget side driver needs to interoperate with a host | |
319 | side Linux-USB device driver, this may help to debug both sides | |
320 | of a USB protocol stack. | |
321 | ||
322 | Say "y" to link the driver statically, or "m" to build a | |
323 | dynamically linked module called "dummy_hcd" and force all | |
324 | gadget drivers to also be dynamically linked. | |
325 | ||
326 | config USB_DUMMY_HCD | |
327 | tristate | |
328 | depends on USB_GADGET_DUMMY_HCD | |
329 | default USB_GADGET | |
028b271b | 330 | select USB_GADGET_SELECTED |
1da177e4 LT |
331 | |
332 | # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears | |
333 | # first and will be selected by default. | |
334 | ||
335 | endchoice | |
336 | ||
337 | config USB_GADGET_DUALSPEED | |
338 | bool | |
339 | depends on USB_GADGET | |
340 | default n | |
341 | help | |
342 | Means that gadget drivers should include extra descriptors | |
343 | and code to handle dual-speed controllers. | |
344 | ||
345 | # | |
346 | # USB Gadget Drivers | |
347 | # | |
348 | choice | |
349 | tristate "USB Gadget Drivers" | |
028b271b | 350 | depends on USB_GADGET && USB_GADGET_SELECTED |
1da177e4 LT |
351 | default USB_ETH |
352 | help | |
353 | A Linux "Gadget Driver" talks to the USB Peripheral Controller | |
354 | driver through the abstract "gadget" API. Some other operating | |
355 | systems call these "client" drivers, of which "class drivers" | |
356 | are a subset (implementing a USB device class specification). | |
357 | A gadget driver implements one or more USB functions using | |
358 | the peripheral hardware. | |
359 | ||
360 | Gadget drivers are hardware-neutral, or "platform independent", | |
361 | except that they sometimes must understand quirks or limitations | |
362 | of the particular controllers they work with. For example, when | |
363 | a controller doesn't support alternate configurations or provide | |
364 | enough of the right types of endpoints, the gadget driver might | |
365 | not be able work with that controller, or might need to implement | |
366 | a less common variant of a device class protocol. | |
367 | ||
368 | # this first set of drivers all depend on bulk-capable hardware. | |
369 | ||
370 | config USB_ZERO | |
371 | tristate "Gadget Zero (DEVELOPMENT)" | |
372 | depends on EXPERIMENTAL | |
373 | help | |
374 | Gadget Zero is a two-configuration device. It either sinks and | |
375 | sources bulk data; or it loops back a configurable number of | |
376 | transfers. It also implements control requests, for "chapter 9" | |
377 | conformance. The driver needs only two bulk-capable endpoints, so | |
378 | it can work on top of most device-side usb controllers. It's | |
379 | useful for testing, and is also a working example showing how | |
380 | USB "gadget drivers" can be written. | |
381 | ||
382 | Make this be the first driver you try using on top of any new | |
383 | USB peripheral controller driver. Then you can use host-side | |
384 | test software, like the "usbtest" driver, to put your hardware | |
385 | and its driver through a basic set of functional tests. | |
386 | ||
387 | Gadget Zero also works with the host-side "usb-skeleton" driver, | |
388 | and with many kinds of host-side test software. You may need | |
389 | to tweak product and vendor IDs before host software knows about | |
390 | this device, and arrange to select an appropriate configuration. | |
391 | ||
392 | Say "y" to link the driver statically, or "m" to build a | |
393 | dynamically linked module called "g_zero". | |
394 | ||
395 | config USB_ZERO_HNPTEST | |
396 | boolean "HNP Test Device" | |
397 | depends on USB_ZERO && USB_OTG | |
398 | help | |
399 | You can configure this device to enumerate using the device | |
400 | identifiers of the USB-OTG test device. That means that when | |
401 | this gadget connects to another OTG device, with this one using | |
402 | the "B-Peripheral" role, that device will use HNP to let this | |
403 | one serve as the USB host instead (in the "B-Host" role). | |
404 | ||
405 | config USB_ETH | |
406 | tristate "Ethernet Gadget (with CDC Ethernet support)" | |
407 | depends on NET | |
408 | help | |
409 | This driver implements Ethernet style communication, in either | |
410 | of two ways: | |
411 | ||
412 | - The "Communication Device Class" (CDC) Ethernet Control Model. | |
413 | That protocol is often avoided with pure Ethernet adapters, in | |
414 | favor of simpler vendor-specific hardware, but is widely | |
415 | supported by firmware for smart network devices. | |
416 | ||
417 | - On hardware can't implement that protocol, a simple CDC subset | |
418 | is used, placing fewer demands on USB. | |
419 | ||
420 | RNDIS support is a third option, more demanding than that subset. | |
421 | ||
422 | Within the USB device, this gadget driver exposes a network device | |
423 | "usbX", where X depends on what other networking devices you have. | |
424 | Treat it like a two-node Ethernet link: host, and gadget. | |
425 | ||
426 | The Linux-USB host-side "usbnet" driver interoperates with this | |
427 | driver, so that deep I/O queues can be supported. On 2.4 kernels, | |
428 | use "CDCEther" instead, if you're using the CDC option. That CDC | |
429 | mode should also interoperate with standard CDC Ethernet class | |
430 | drivers on other host operating systems. | |
431 | ||
432 | Say "y" to link the driver statically, or "m" to build a | |
433 | dynamically linked module called "g_ether". | |
434 | ||
435 | config USB_ETH_RNDIS | |
436 | bool "RNDIS support (EXPERIMENTAL)" | |
437 | depends on USB_ETH && EXPERIMENTAL | |
438 | default y | |
439 | help | |
440 | Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, | |
441 | and Microsoft provides redistributable binary RNDIS drivers for | |
442 | older versions of Windows. | |
443 | ||
444 | If you say "y" here, the Ethernet gadget driver will try to provide | |
445 | a second device configuration, supporting RNDIS to talk to such | |
446 | Microsoft USB hosts. | |
447 | ||
448 | To make MS-Windows work with this, use Documentation/usb/linux.inf | |
449 | as the "driver info file". For versions of MS-Windows older than | |
450 | XP, you'll need to download drivers from Microsoft's website; a URL | |
451 | is given in comments found in that info file. | |
452 | ||
453 | config USB_GADGETFS | |
454 | tristate "Gadget Filesystem (EXPERIMENTAL)" | |
455 | depends on EXPERIMENTAL | |
456 | help | |
457 | This driver provides a filesystem based API that lets user mode | |
458 | programs implement a single-configuration USB device, including | |
459 | endpoint I/O and control requests that don't relate to enumeration. | |
460 | All endpoints, transfer speeds, and transfer types supported by | |
461 | the hardware are available, through read() and write() calls. | |
462 | ||
463 | Say "y" to link the driver statically, or "m" to build a | |
464 | dynamically linked module called "gadgetfs". | |
465 | ||
466 | config USB_FILE_STORAGE | |
467 | tristate "File-backed Storage Gadget" | |
87840289 | 468 | depends on BLOCK |
1da177e4 LT |
469 | help |
470 | The File-backed Storage Gadget acts as a USB Mass Storage | |
471 | disk drive. As its storage repository it can use a regular | |
472 | file or a block device (in much the same way as the "loop" | |
473 | device driver), specified as a module parameter. | |
474 | ||
475 | Say "y" to link the driver statically, or "m" to build a | |
476 | dynamically linked module called "g_file_storage". | |
477 | ||
478 | config USB_FILE_STORAGE_TEST | |
479 | bool "File-backed Storage Gadget testing version" | |
480 | depends on USB_FILE_STORAGE | |
481 | default n | |
482 | help | |
483 | Say "y" to generate the larger testing version of the | |
484 | File-backed Storage Gadget, useful for probing the | |
485 | behavior of USB Mass Storage hosts. Not needed for | |
486 | normal operation. | |
487 | ||
488 | config USB_G_SERIAL | |
489 | tristate "Serial Gadget (with CDC ACM support)" | |
490 | help | |
491 | The Serial Gadget talks to the Linux-USB generic serial driver. | |
492 | This driver supports a CDC-ACM module option, which can be used | |
493 | to interoperate with MS-Windows hosts or with the Linux-USB | |
494 | "cdc-acm" driver. | |
495 | ||
496 | Say "y" to link the driver statically, or "m" to build a | |
497 | dynamically linked module called "g_serial". | |
498 | ||
499 | For more information, see Documentation/usb/gadget_serial.txt | |
500 | which includes instructions and a "driver info file" needed to | |
501 | make MS-Windows work with this driver. | |
502 | ||
f2ebf92c BW |
503 | config USB_MIDI_GADGET |
504 | tristate "MIDI Gadget (EXPERIMENTAL)" | |
505 | depends on SND && EXPERIMENTAL | |
506 | select SND_RAWMIDI | |
507 | help | |
508 | The MIDI Gadget acts as a USB Audio device, with one MIDI | |
509 | input and one MIDI output. These MIDI jacks appear as | |
510 | a sound "card" in the ALSA sound system. Other MIDI | |
511 | connections can then be made on the gadget system, using | |
512 | ALSA's aconnect utility etc. | |
513 | ||
514 | Say "y" to link the driver statically, or "m" to build a | |
515 | dynamically linked module called "g_midi". | |
516 | ||
1da177e4 LT |
517 | |
518 | # put drivers that need isochronous transfer support (for audio | |
519 | # or video class gadget drivers), or specific hardware, here. | |
520 | ||
521 | # - none yet | |
522 | ||
523 | endchoice | |
524 | ||
525 | endmenu |