]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * omap_udc.c -- for OMAP full speed udc; most chips support OTG. | |
3 | * | |
4 | * Copyright (C) 2004 Texas Instruments, Inc. | |
5 | * Copyright (C) 2004-2005 David Brownell | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
20 | */ | |
21 | ||
22 | #undef DEBUG | |
23 | #undef VERBOSE | |
24 | ||
25 | #include <linux/config.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/ioport.h> | |
29 | #include <linux/types.h> | |
30 | #include <linux/errno.h> | |
31 | #include <linux/delay.h> | |
32 | #include <linux/sched.h> | |
33 | #include <linux/slab.h> | |
34 | #include <linux/init.h> | |
35 | #include <linux/timer.h> | |
36 | #include <linux/list.h> | |
37 | #include <linux/interrupt.h> | |
38 | #include <linux/proc_fs.h> | |
39 | #include <linux/mm.h> | |
40 | #include <linux/moduleparam.h> | |
d052d1be | 41 | #include <linux/platform_device.h> |
1da177e4 LT |
42 | #include <linux/usb_ch9.h> |
43 | #include <linux/usb_gadget.h> | |
44 | #include <linux/usb_otg.h> | |
45 | #include <linux/dma-mapping.h> | |
46 | ||
47 | #include <asm/byteorder.h> | |
48 | #include <asm/io.h> | |
49 | #include <asm/irq.h> | |
50 | #include <asm/system.h> | |
51 | #include <asm/unaligned.h> | |
52 | #include <asm/mach-types.h> | |
53 | ||
54 | #include <asm/arch/dma.h> | |
1da177e4 LT |
55 | #include <asm/arch/usb.h> |
56 | ||
57 | #include "omap_udc.h" | |
58 | ||
59 | #undef USB_TRACE | |
60 | ||
61 | /* bulk DMA seems to be behaving for both IN and OUT */ | |
62 | #define USE_DMA | |
63 | ||
64 | /* ISO too */ | |
65 | #define USE_ISO | |
66 | ||
67 | #define DRIVER_DESC "OMAP UDC driver" | |
68 | #define DRIVER_VERSION "4 October 2004" | |
69 | ||
70 | #define DMA_ADDR_INVALID (~(dma_addr_t)0) | |
71 | ||
72 | ||
73 | /* | |
74 | * The OMAP UDC needs _very_ early endpoint setup: before enabling the | |
75 | * D+ pullup to allow enumeration. That's too early for the gadget | |
76 | * framework to use from usb_endpoint_enable(), which happens after | |
77 | * enumeration as part of activating an interface. (But if we add an | |
78 | * optional new "UDC not yet running" state to the gadget driver model, | |
79 | * even just during driver binding, the endpoint autoconfig logic is the | |
80 | * natural spot to manufacture new endpoints.) | |
81 | * | |
82 | * So instead of using endpoint enable calls to control the hardware setup, | |
83 | * this driver defines a "fifo mode" parameter. It's used during driver | |
84 | * initialization to choose among a set of pre-defined endpoint configs. | |
85 | * See omap_udc_setup() for available modes, or to add others. That code | |
86 | * lives in an init section, so use this driver as a module if you need | |
87 | * to change the fifo mode after the kernel boots. | |
88 | * | |
89 | * Gadget drivers normally ignore endpoints they don't care about, and | |
90 | * won't include them in configuration descriptors. That means only | |
91 | * misbehaving hosts would even notice they exist. | |
92 | */ | |
93 | #ifdef USE_ISO | |
94 | static unsigned fifo_mode = 3; | |
95 | #else | |
96 | static unsigned fifo_mode = 0; | |
97 | #endif | |
98 | ||
99 | /* "modprobe omap_udc fifo_mode=42", or else as a kernel | |
100 | * boot parameter "omap_udc:fifo_mode=42" | |
101 | */ | |
102 | module_param (fifo_mode, uint, 0); | |
103 | MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)"); | |
104 | ||
105 | #ifdef USE_DMA | |
106 | static unsigned use_dma = 1; | |
107 | ||
108 | /* "modprobe omap_udc use_dma=y", or else as a kernel | |
109 | * boot parameter "omap_udc:use_dma=y" | |
110 | */ | |
111 | module_param (use_dma, bool, 0); | |
112 | MODULE_PARM_DESC (use_dma, "enable/disable DMA"); | |
113 | #else /* !USE_DMA */ | |
114 | ||
115 | /* save a bit of code */ | |
116 | #define use_dma 0 | |
117 | #endif /* !USE_DMA */ | |
118 | ||
119 | ||
120 | static const char driver_name [] = "omap_udc"; | |
121 | static const char driver_desc [] = DRIVER_DESC; | |
122 | ||
123 | /*-------------------------------------------------------------------------*/ | |
124 | ||
125 | /* there's a notion of "current endpoint" for modifying endpoint | |
126 | * state, and PIO access to its FIFO. | |
127 | */ | |
128 | ||
129 | static void use_ep(struct omap_ep *ep, u16 select) | |
130 | { | |
131 | u16 num = ep->bEndpointAddress & 0x0f; | |
132 | ||
133 | if (ep->bEndpointAddress & USB_DIR_IN) | |
134 | num |= UDC_EP_DIR; | |
135 | UDC_EP_NUM_REG = num | select; | |
136 | /* when select, MUST deselect later !! */ | |
137 | } | |
138 | ||
139 | static inline void deselect_ep(void) | |
140 | { | |
141 | UDC_EP_NUM_REG &= ~UDC_EP_SEL; | |
142 | /* 6 wait states before TX will happen */ | |
143 | } | |
144 | ||
145 | static void dma_channel_claim(struct omap_ep *ep, unsigned preferred); | |
146 | ||
147 | /*-------------------------------------------------------------------------*/ | |
148 | ||
149 | static int omap_ep_enable(struct usb_ep *_ep, | |
150 | const struct usb_endpoint_descriptor *desc) | |
151 | { | |
152 | struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); | |
153 | struct omap_udc *udc; | |
154 | unsigned long flags; | |
155 | u16 maxp; | |
156 | ||
157 | /* catch various bogus parameters */ | |
158 | if (!_ep || !desc || ep->desc | |
159 | || desc->bDescriptorType != USB_DT_ENDPOINT | |
160 | || ep->bEndpointAddress != desc->bEndpointAddress | |
161 | || ep->maxpacket < le16_to_cpu | |
162 | (desc->wMaxPacketSize)) { | |
163 | DBG("%s, bad ep or descriptor\n", __FUNCTION__); | |
164 | return -EINVAL; | |
165 | } | |
166 | maxp = le16_to_cpu (desc->wMaxPacketSize); | |
167 | if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK | |
168 | && maxp != ep->maxpacket) | |
65111084 | 169 | || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket |
1da177e4 LT |
170 | || !desc->wMaxPacketSize) { |
171 | DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); | |
172 | return -ERANGE; | |
173 | } | |
174 | ||
175 | #ifdef USE_ISO | |
176 | if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC | |
177 | && desc->bInterval != 1)) { | |
178 | /* hardware wants period = 1; USB allows 2^(Interval-1) */ | |
179 | DBG("%s, unsupported ISO period %dms\n", _ep->name, | |
180 | 1 << (desc->bInterval - 1)); | |
181 | return -EDOM; | |
182 | } | |
183 | #else | |
184 | if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { | |
185 | DBG("%s, ISO nyet\n", _ep->name); | |
186 | return -EDOM; | |
187 | } | |
188 | #endif | |
189 | ||
190 | /* xfer types must match, except that interrupt ~= bulk */ | |
191 | if (ep->bmAttributes != desc->bmAttributes | |
192 | && ep->bmAttributes != USB_ENDPOINT_XFER_BULK | |
193 | && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { | |
194 | DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); | |
195 | return -EINVAL; | |
196 | } | |
197 | ||
198 | udc = ep->udc; | |
199 | if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { | |
200 | DBG("%s, bogus device state\n", __FUNCTION__); | |
201 | return -ESHUTDOWN; | |
202 | } | |
203 | ||
204 | spin_lock_irqsave(&udc->lock, flags); | |
205 | ||
206 | ep->desc = desc; | |
207 | ep->irqs = 0; | |
208 | ep->stopped = 0; | |
209 | ep->ep.maxpacket = maxp; | |
210 | ||
211 | /* set endpoint to initial state */ | |
212 | ep->dma_channel = 0; | |
213 | ep->has_dma = 0; | |
214 | ep->lch = -1; | |
215 | use_ep(ep, UDC_EP_SEL); | |
65111084 | 216 | UDC_CTRL_REG = udc->clr_halt; |
1da177e4 LT |
217 | ep->ackwait = 0; |
218 | deselect_ep(); | |
219 | ||
220 | if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) | |
221 | list_add(&ep->iso, &udc->iso); | |
222 | ||
223 | /* maybe assign a DMA channel to this endpoint */ | |
224 | if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK) | |
225 | /* FIXME ISO can dma, but prefers first channel */ | |
226 | dma_channel_claim(ep, 0); | |
227 | ||
228 | /* PIO OUT may RX packets */ | |
229 | if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC | |
230 | && !ep->has_dma | |
231 | && !(ep->bEndpointAddress & USB_DIR_IN)) { | |
232 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
233 | ep->ackwait = 1 + ep->double_buf; | |
234 | } | |
235 | ||
236 | spin_unlock_irqrestore(&udc->lock, flags); | |
237 | VDBG("%s enabled\n", _ep->name); | |
238 | return 0; | |
239 | } | |
240 | ||
241 | static void nuke(struct omap_ep *, int status); | |
242 | ||
243 | static int omap_ep_disable(struct usb_ep *_ep) | |
244 | { | |
245 | struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); | |
246 | unsigned long flags; | |
247 | ||
248 | if (!_ep || !ep->desc) { | |
249 | DBG("%s, %s not enabled\n", __FUNCTION__, | |
250 | _ep ? ep->ep.name : NULL); | |
251 | return -EINVAL; | |
252 | } | |
253 | ||
254 | spin_lock_irqsave(&ep->udc->lock, flags); | |
313980c9 | 255 | ep->desc = NULL; |
1da177e4 LT |
256 | nuke (ep, -ESHUTDOWN); |
257 | ep->ep.maxpacket = ep->maxpacket; | |
258 | ep->has_dma = 0; | |
259 | UDC_CTRL_REG = UDC_SET_HALT; | |
260 | list_del_init(&ep->iso); | |
261 | del_timer(&ep->timer); | |
262 | ||
263 | spin_unlock_irqrestore(&ep->udc->lock, flags); | |
264 | ||
265 | VDBG("%s disabled\n", _ep->name); | |
266 | return 0; | |
267 | } | |
268 | ||
269 | /*-------------------------------------------------------------------------*/ | |
270 | ||
271 | static struct usb_request * | |
55016f10 | 272 | omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) |
1da177e4 LT |
273 | { |
274 | struct omap_req *req; | |
275 | ||
7039f422 | 276 | req = kzalloc(sizeof(*req), gfp_flags); |
1da177e4 | 277 | if (req) { |
1da177e4 LT |
278 | req->req.dma = DMA_ADDR_INVALID; |
279 | INIT_LIST_HEAD (&req->queue); | |
280 | } | |
281 | return &req->req; | |
282 | } | |
283 | ||
284 | static void | |
285 | omap_free_request(struct usb_ep *ep, struct usb_request *_req) | |
286 | { | |
287 | struct omap_req *req = container_of(_req, struct omap_req, req); | |
288 | ||
289 | if (_req) | |
290 | kfree (req); | |
291 | } | |
292 | ||
293 | /*-------------------------------------------------------------------------*/ | |
294 | ||
295 | static void * | |
296 | omap_alloc_buffer( | |
297 | struct usb_ep *_ep, | |
298 | unsigned bytes, | |
299 | dma_addr_t *dma, | |
55016f10 | 300 | gfp_t gfp_flags |
1da177e4 LT |
301 | ) |
302 | { | |
303 | void *retval; | |
304 | struct omap_ep *ep; | |
305 | ||
306 | ep = container_of(_ep, struct omap_ep, ep); | |
307 | if (use_dma && ep->has_dma) { | |
308 | static int warned; | |
309 | if (!warned && bytes < PAGE_SIZE) { | |
310 | dev_warn(ep->udc->gadget.dev.parent, | |
311 | "using dma_alloc_coherent for " | |
312 | "small allocations wastes memory\n"); | |
313 | warned++; | |
314 | } | |
315 | return dma_alloc_coherent(ep->udc->gadget.dev.parent, | |
316 | bytes, dma, gfp_flags); | |
317 | } | |
318 | ||
319 | retval = kmalloc(bytes, gfp_flags); | |
320 | if (retval) | |
321 | *dma = virt_to_phys(retval); | |
322 | return retval; | |
323 | } | |
324 | ||
325 | static void omap_free_buffer( | |
326 | struct usb_ep *_ep, | |
327 | void *buf, | |
328 | dma_addr_t dma, | |
329 | unsigned bytes | |
330 | ) | |
331 | { | |
332 | struct omap_ep *ep; | |
333 | ||
334 | ep = container_of(_ep, struct omap_ep, ep); | |
335 | if (use_dma && _ep && ep->has_dma) | |
336 | dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma); | |
337 | else | |
338 | kfree (buf); | |
339 | } | |
340 | ||
341 | /*-------------------------------------------------------------------------*/ | |
342 | ||
343 | static void | |
344 | done(struct omap_ep *ep, struct omap_req *req, int status) | |
345 | { | |
346 | unsigned stopped = ep->stopped; | |
347 | ||
348 | list_del_init(&req->queue); | |
349 | ||
350 | if (req->req.status == -EINPROGRESS) | |
351 | req->req.status = status; | |
352 | else | |
353 | status = req->req.status; | |
354 | ||
355 | if (use_dma && ep->has_dma) { | |
356 | if (req->mapped) { | |
357 | dma_unmap_single(ep->udc->gadget.dev.parent, | |
358 | req->req.dma, req->req.length, | |
359 | (ep->bEndpointAddress & USB_DIR_IN) | |
360 | ? DMA_TO_DEVICE | |
361 | : DMA_FROM_DEVICE); | |
362 | req->req.dma = DMA_ADDR_INVALID; | |
363 | req->mapped = 0; | |
364 | } else | |
365 | dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, | |
366 | req->req.dma, req->req.length, | |
367 | (ep->bEndpointAddress & USB_DIR_IN) | |
368 | ? DMA_TO_DEVICE | |
369 | : DMA_FROM_DEVICE); | |
370 | } | |
371 | ||
372 | #ifndef USB_TRACE | |
373 | if (status && status != -ESHUTDOWN) | |
374 | #endif | |
375 | VDBG("complete %s req %p stat %d len %u/%u\n", | |
376 | ep->ep.name, &req->req, status, | |
377 | req->req.actual, req->req.length); | |
378 | ||
379 | /* don't modify queue heads during completion callback */ | |
380 | ep->stopped = 1; | |
381 | spin_unlock(&ep->udc->lock); | |
382 | req->req.complete(&ep->ep, &req->req); | |
383 | spin_lock(&ep->udc->lock); | |
384 | ep->stopped = stopped; | |
385 | } | |
386 | ||
387 | /*-------------------------------------------------------------------------*/ | |
388 | ||
313980c9 DB |
389 | #define UDC_FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL) |
390 | #define UDC_FIFO_UNWRITABLE (UDC_EP_HALTED | UDC_FIFO_FULL) | |
1da177e4 LT |
391 | |
392 | #define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY) | |
393 | #define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY) | |
394 | ||
395 | static inline int | |
396 | write_packet(u8 *buf, struct omap_req *req, unsigned max) | |
397 | { | |
398 | unsigned len; | |
399 | u16 *wp; | |
400 | ||
401 | len = min(req->req.length - req->req.actual, max); | |
402 | req->req.actual += len; | |
403 | ||
404 | max = len; | |
405 | if (likely((((int)buf) & 1) == 0)) { | |
406 | wp = (u16 *)buf; | |
407 | while (max >= 2) { | |
408 | UDC_DATA_REG = *wp++; | |
409 | max -= 2; | |
410 | } | |
411 | buf = (u8 *)wp; | |
412 | } | |
413 | while (max--) | |
414 | *(volatile u8 *)&UDC_DATA_REG = *buf++; | |
415 | return len; | |
416 | } | |
417 | ||
418 | // FIXME change r/w fifo calling convention | |
419 | ||
420 | ||
421 | // return: 0 = still running, 1 = completed, negative = errno | |
422 | static int write_fifo(struct omap_ep *ep, struct omap_req *req) | |
423 | { | |
424 | u8 *buf; | |
425 | unsigned count; | |
426 | int is_last; | |
427 | u16 ep_stat; | |
428 | ||
429 | buf = req->req.buf + req->req.actual; | |
430 | prefetch(buf); | |
431 | ||
432 | /* PIO-IN isn't double buffered except for iso */ | |
433 | ep_stat = UDC_STAT_FLG_REG; | |
313980c9 | 434 | if (ep_stat & UDC_FIFO_UNWRITABLE) |
1da177e4 LT |
435 | return 0; |
436 | ||
437 | count = ep->ep.maxpacket; | |
438 | count = write_packet(buf, req, count); | |
439 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
440 | ep->ackwait = 1; | |
441 | ||
442 | /* last packet is often short (sometimes a zlp) */ | |
443 | if (count != ep->ep.maxpacket) | |
444 | is_last = 1; | |
445 | else if (req->req.length == req->req.actual | |
446 | && !req->req.zero) | |
447 | is_last = 1; | |
448 | else | |
449 | is_last = 0; | |
450 | ||
451 | /* NOTE: requests complete when all IN data is in a | |
452 | * FIFO (or sometimes later, if a zlp was needed). | |
453 | * Use usb_ep_fifo_status() where needed. | |
454 | */ | |
455 | if (is_last) | |
456 | done(ep, req, 0); | |
457 | return is_last; | |
458 | } | |
459 | ||
460 | static inline int | |
461 | read_packet(u8 *buf, struct omap_req *req, unsigned avail) | |
462 | { | |
463 | unsigned len; | |
464 | u16 *wp; | |
465 | ||
466 | len = min(req->req.length - req->req.actual, avail); | |
467 | req->req.actual += len; | |
468 | avail = len; | |
469 | ||
470 | if (likely((((int)buf) & 1) == 0)) { | |
471 | wp = (u16 *)buf; | |
472 | while (avail >= 2) { | |
473 | *wp++ = UDC_DATA_REG; | |
474 | avail -= 2; | |
475 | } | |
476 | buf = (u8 *)wp; | |
477 | } | |
478 | while (avail--) | |
479 | *buf++ = *(volatile u8 *)&UDC_DATA_REG; | |
480 | return len; | |
481 | } | |
482 | ||
483 | // return: 0 = still running, 1 = queue empty, negative = errno | |
484 | static int read_fifo(struct omap_ep *ep, struct omap_req *req) | |
485 | { | |
486 | u8 *buf; | |
487 | unsigned count, avail; | |
488 | int is_last; | |
489 | ||
490 | buf = req->req.buf + req->req.actual; | |
491 | prefetchw(buf); | |
492 | ||
493 | for (;;) { | |
494 | u16 ep_stat = UDC_STAT_FLG_REG; | |
495 | ||
496 | is_last = 0; | |
497 | if (ep_stat & FIFO_EMPTY) { | |
498 | if (!ep->double_buf) | |
499 | break; | |
500 | ep->fnf = 1; | |
501 | } | |
502 | if (ep_stat & UDC_EP_HALTED) | |
503 | break; | |
504 | ||
313980c9 | 505 | if (ep_stat & UDC_FIFO_FULL) |
1da177e4 LT |
506 | avail = ep->ep.maxpacket; |
507 | else { | |
508 | avail = UDC_RXFSTAT_REG; | |
509 | ep->fnf = ep->double_buf; | |
510 | } | |
511 | count = read_packet(buf, req, avail); | |
512 | ||
513 | /* partial packet reads may not be errors */ | |
514 | if (count < ep->ep.maxpacket) { | |
515 | is_last = 1; | |
516 | /* overflowed this request? flush extra data */ | |
517 | if (count != avail) { | |
518 | req->req.status = -EOVERFLOW; | |
519 | avail -= count; | |
520 | while (avail--) | |
521 | (void) *(volatile u8 *)&UDC_DATA_REG; | |
522 | } | |
523 | } else if (req->req.length == req->req.actual) | |
524 | is_last = 1; | |
525 | else | |
526 | is_last = 0; | |
527 | ||
528 | if (!ep->bEndpointAddress) | |
529 | break; | |
530 | if (is_last) | |
531 | done(ep, req, 0); | |
532 | break; | |
533 | } | |
534 | return is_last; | |
535 | } | |
536 | ||
537 | /*-------------------------------------------------------------------------*/ | |
538 | ||
65111084 DB |
539 | static inline dma_addr_t dma_csac(unsigned lch) |
540 | { | |
541 | dma_addr_t csac; | |
542 | ||
543 | /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is | |
544 | * read before the DMA controller finished disabling the channel. | |
545 | */ | |
546 | csac = omap_readw(OMAP_DMA_CSAC(lch)); | |
547 | if (csac == 0) | |
548 | csac = omap_readw(OMAP_DMA_CSAC(lch)); | |
549 | return csac; | |
550 | } | |
551 | ||
552 | static inline dma_addr_t dma_cdac(unsigned lch) | |
553 | { | |
554 | dma_addr_t cdac; | |
555 | ||
556 | /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is | |
557 | * read before the DMA controller finished disabling the channel. | |
558 | */ | |
559 | cdac = omap_readw(OMAP_DMA_CDAC(lch)); | |
560 | if (cdac == 0) | |
561 | cdac = omap_readw(OMAP_DMA_CDAC(lch)); | |
562 | return cdac; | |
563 | } | |
564 | ||
1da177e4 LT |
565 | static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) |
566 | { | |
567 | dma_addr_t end; | |
568 | ||
569 | /* IN-DMA needs this on fault/cancel paths, so 15xx misreports | |
570 | * the last transfer's bytecount by more than a FIFO's worth. | |
571 | */ | |
572 | if (cpu_is_omap15xx()) | |
573 | return 0; | |
574 | ||
65111084 | 575 | end = dma_csac(ep->lch); |
1da177e4 LT |
576 | if (end == ep->dma_counter) |
577 | return 0; | |
578 | ||
579 | end |= start & (0xffff << 16); | |
580 | if (end < start) | |
581 | end += 0x10000; | |
582 | return end - start; | |
583 | } | |
584 | ||
585 | #define DMA_DEST_LAST(x) (cpu_is_omap15xx() \ | |
65111084 DB |
586 | ? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \ |
587 | : dma_cdac(x)) | |
1da177e4 LT |
588 | |
589 | static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start) | |
590 | { | |
591 | dma_addr_t end; | |
592 | ||
65111084 | 593 | end = DMA_DEST_LAST(ep->lch); |
1da177e4 LT |
594 | if (end == ep->dma_counter) |
595 | return 0; | |
596 | ||
597 | end |= start & (0xffff << 16); | |
598 | if (cpu_is_omap15xx()) | |
599 | end++; | |
600 | if (end < start) | |
601 | end += 0x10000; | |
602 | return end - start; | |
603 | } | |
604 | ||
605 | ||
606 | /* Each USB transfer request using DMA maps to one or more DMA transfers. | |
607 | * When DMA completion isn't request completion, the UDC continues with | |
608 | * the next DMA transfer for that USB transfer. | |
609 | */ | |
610 | ||
611 | static void next_in_dma(struct omap_ep *ep, struct omap_req *req) | |
612 | { | |
613 | u16 txdma_ctrl; | |
614 | unsigned length = req->req.length - req->req.actual; | |
615 | const int sync_mode = cpu_is_omap15xx() | |
616 | ? OMAP_DMA_SYNC_FRAME | |
617 | : OMAP_DMA_SYNC_ELEMENT; | |
618 | ||
619 | /* measure length in either bytes or packets */ | |
65111084 | 620 | if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC) |
1da177e4 LT |
621 | || (cpu_is_omap15xx() && length < ep->maxpacket)) { |
622 | txdma_ctrl = UDC_TXN_EOT | length; | |
623 | omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, | |
624 | length, 1, sync_mode); | |
625 | } else { | |
626 | length = min(length / ep->maxpacket, | |
627 | (unsigned) UDC_TXN_TSC + 1); | |
628 | txdma_ctrl = length; | |
65111084 DB |
629 | omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, |
630 | ep->ep.maxpacket >> 1, length, sync_mode); | |
1da177e4 LT |
631 | length *= ep->maxpacket; |
632 | } | |
633 | omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF, | |
634 | OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); | |
635 | ||
636 | omap_start_dma(ep->lch); | |
65111084 | 637 | ep->dma_counter = dma_csac(ep->lch); |
1da177e4 LT |
638 | UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel); |
639 | UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl; | |
640 | req->dma_bytes = length; | |
641 | } | |
642 | ||
643 | static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status) | |
644 | { | |
645 | if (status == 0) { | |
646 | req->req.actual += req->dma_bytes; | |
647 | ||
648 | /* return if this request needs to send data or zlp */ | |
649 | if (req->req.actual < req->req.length) | |
650 | return; | |
651 | if (req->req.zero | |
652 | && req->dma_bytes != 0 | |
653 | && (req->req.actual % ep->maxpacket) == 0) | |
654 | return; | |
655 | } else | |
656 | req->req.actual += dma_src_len(ep, req->req.dma | |
657 | + req->req.actual); | |
658 | ||
659 | /* tx completion */ | |
660 | omap_stop_dma(ep->lch); | |
661 | UDC_DMA_IRQ_EN_REG &= ~UDC_TX_DONE_IE(ep->dma_channel); | |
662 | done(ep, req, status); | |
663 | } | |
664 | ||
665 | static void next_out_dma(struct omap_ep *ep, struct omap_req *req) | |
666 | { | |
667 | unsigned packets; | |
668 | ||
669 | /* NOTE: we filtered out "short reads" before, so we know | |
670 | * the buffer has only whole numbers of packets. | |
671 | */ | |
672 | ||
673 | /* set up this DMA transfer, enable the fifo, start */ | |
674 | packets = (req->req.length - req->req.actual) / ep->ep.maxpacket; | |
675 | packets = min(packets, (unsigned)UDC_RXN_TC + 1); | |
676 | req->dma_bytes = packets * ep->ep.maxpacket; | |
65111084 DB |
677 | omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, |
678 | ep->ep.maxpacket >> 1, packets, | |
1da177e4 LT |
679 | OMAP_DMA_SYNC_ELEMENT); |
680 | omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF, | |
681 | OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); | |
65111084 | 682 | ep->dma_counter = DMA_DEST_LAST(ep->lch); |
1da177e4 LT |
683 | |
684 | UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1); | |
685 | UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel); | |
686 | UDC_EP_NUM_REG = (ep->bEndpointAddress & 0xf); | |
687 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
688 | ||
689 | omap_start_dma(ep->lch); | |
690 | } | |
691 | ||
692 | static void | |
cb97c5c9 | 693 | finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one) |
1da177e4 LT |
694 | { |
695 | u16 count; | |
696 | ||
697 | if (status == 0) | |
698 | ep->dma_counter = (u16) (req->req.dma + req->req.actual); | |
699 | count = dma_dest_len(ep, req->req.dma + req->req.actual); | |
700 | count += req->req.actual; | |
cb97c5c9 DB |
701 | if (one) |
702 | count--; | |
1da177e4 LT |
703 | if (count <= req->req.length) |
704 | req->req.actual = count; | |
705 | ||
706 | if (count != req->dma_bytes || status) | |
707 | omap_stop_dma(ep->lch); | |
708 | ||
709 | /* if this wasn't short, request may need another transfer */ | |
710 | else if (req->req.actual < req->req.length) | |
711 | return; | |
712 | ||
713 | /* rx completion */ | |
714 | UDC_DMA_IRQ_EN_REG &= ~UDC_RX_EOT_IE(ep->dma_channel); | |
715 | done(ep, req, status); | |
716 | } | |
717 | ||
718 | static void dma_irq(struct omap_udc *udc, u16 irq_src) | |
719 | { | |
720 | u16 dman_stat = UDC_DMAN_STAT_REG; | |
721 | struct omap_ep *ep; | |
722 | struct omap_req *req; | |
723 | ||
724 | /* IN dma: tx to host */ | |
725 | if (irq_src & UDC_TXN_DONE) { | |
726 | ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)]; | |
727 | ep->irqs++; | |
728 | /* can see TXN_DONE after dma abort */ | |
729 | if (!list_empty(&ep->queue)) { | |
730 | req = container_of(ep->queue.next, | |
731 | struct omap_req, queue); | |
732 | finish_in_dma(ep, req, 0); | |
733 | } | |
734 | UDC_IRQ_SRC_REG = UDC_TXN_DONE; | |
735 | ||
736 | if (!list_empty (&ep->queue)) { | |
737 | req = container_of(ep->queue.next, | |
738 | struct omap_req, queue); | |
739 | next_in_dma(ep, req); | |
740 | } | |
741 | } | |
742 | ||
743 | /* OUT dma: rx from host */ | |
744 | if (irq_src & UDC_RXN_EOT) { | |
745 | ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; | |
746 | ep->irqs++; | |
747 | /* can see RXN_EOT after dma abort */ | |
748 | if (!list_empty(&ep->queue)) { | |
749 | req = container_of(ep->queue.next, | |
750 | struct omap_req, queue); | |
cb97c5c9 | 751 | finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB); |
1da177e4 LT |
752 | } |
753 | UDC_IRQ_SRC_REG = UDC_RXN_EOT; | |
754 | ||
755 | if (!list_empty (&ep->queue)) { | |
756 | req = container_of(ep->queue.next, | |
757 | struct omap_req, queue); | |
758 | next_out_dma(ep, req); | |
759 | } | |
760 | } | |
761 | ||
762 | if (irq_src & UDC_RXN_CNT) { | |
763 | ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; | |
764 | ep->irqs++; | |
765 | /* omap15xx does this unasked... */ | |
766 | VDBG("%s, RX_CNT irq?\n", ep->ep.name); | |
767 | UDC_IRQ_SRC_REG = UDC_RXN_CNT; | |
768 | } | |
769 | } | |
770 | ||
771 | static void dma_error(int lch, u16 ch_status, void *data) | |
772 | { | |
773 | struct omap_ep *ep = data; | |
774 | ||
775 | /* if ch_status & OMAP_DMA_DROP_IRQ ... */ | |
776 | /* if ch_status & OMAP_DMA_TOUT_IRQ ... */ | |
777 | ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status); | |
778 | ||
779 | /* complete current transfer ... */ | |
780 | } | |
781 | ||
782 | static void dma_channel_claim(struct omap_ep *ep, unsigned channel) | |
783 | { | |
784 | u16 reg; | |
785 | int status, restart, is_in; | |
786 | ||
787 | is_in = ep->bEndpointAddress & USB_DIR_IN; | |
788 | if (is_in) | |
789 | reg = UDC_TXDMA_CFG_REG; | |
790 | else | |
791 | reg = UDC_RXDMA_CFG_REG; | |
65111084 | 792 | reg |= UDC_DMA_REQ; /* "pulse" activated */ |
1da177e4 LT |
793 | |
794 | ep->dma_channel = 0; | |
795 | ep->lch = -1; | |
796 | if (channel == 0 || channel > 3) { | |
797 | if ((reg & 0x0f00) == 0) | |
798 | channel = 3; | |
799 | else if ((reg & 0x00f0) == 0) | |
800 | channel = 2; | |
801 | else if ((reg & 0x000f) == 0) /* preferred for ISO */ | |
802 | channel = 1; | |
803 | else { | |
804 | status = -EMLINK; | |
805 | goto just_restart; | |
806 | } | |
807 | } | |
808 | reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1)); | |
809 | ep->dma_channel = channel; | |
810 | ||
811 | if (is_in) { | |
812 | status = omap_request_dma(OMAP_DMA_USB_W2FC_TX0 - 1 + channel, | |
813 | ep->ep.name, dma_error, ep, &ep->lch); | |
814 | if (status == 0) { | |
815 | UDC_TXDMA_CFG_REG = reg; | |
65111084 DB |
816 | /* EMIFF */ |
817 | omap_set_dma_src_burst_mode(ep->lch, | |
818 | OMAP_DMA_DATA_BURST_4); | |
819 | omap_set_dma_src_data_pack(ep->lch, 1); | |
820 | /* TIPB */ | |
1da177e4 LT |
821 | omap_set_dma_dest_params(ep->lch, |
822 | OMAP_DMA_PORT_TIPB, | |
823 | OMAP_DMA_AMODE_CONSTANT, | |
824 | (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG)); | |
825 | } | |
826 | } else { | |
827 | status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel, | |
828 | ep->ep.name, dma_error, ep, &ep->lch); | |
829 | if (status == 0) { | |
830 | UDC_RXDMA_CFG_REG = reg; | |
65111084 | 831 | /* TIPB */ |
1da177e4 LT |
832 | omap_set_dma_src_params(ep->lch, |
833 | OMAP_DMA_PORT_TIPB, | |
834 | OMAP_DMA_AMODE_CONSTANT, | |
835 | (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG)); | |
65111084 DB |
836 | /* EMIFF */ |
837 | omap_set_dma_dest_burst_mode(ep->lch, | |
838 | OMAP_DMA_DATA_BURST_4); | |
839 | omap_set_dma_dest_data_pack(ep->lch, 1); | |
1da177e4 LT |
840 | } |
841 | } | |
842 | if (status) | |
843 | ep->dma_channel = 0; | |
844 | else { | |
845 | ep->has_dma = 1; | |
846 | omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ); | |
847 | ||
848 | /* channel type P: hw synch (fifo) */ | |
849 | if (!cpu_is_omap15xx()) | |
850 | omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch)); | |
851 | } | |
852 | ||
853 | just_restart: | |
854 | /* restart any queue, even if the claim failed */ | |
855 | restart = !ep->stopped && !list_empty(&ep->queue); | |
856 | ||
857 | if (status) | |
858 | DBG("%s no dma channel: %d%s\n", ep->ep.name, status, | |
859 | restart ? " (restart)" : ""); | |
860 | else | |
861 | DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name, | |
862 | is_in ? 't' : 'r', | |
863 | ep->dma_channel - 1, ep->lch, | |
864 | restart ? " (restart)" : ""); | |
865 | ||
866 | if (restart) { | |
867 | struct omap_req *req; | |
868 | req = container_of(ep->queue.next, struct omap_req, queue); | |
869 | if (ep->has_dma) | |
870 | (is_in ? next_in_dma : next_out_dma)(ep, req); | |
871 | else { | |
872 | use_ep(ep, UDC_EP_SEL); | |
873 | (is_in ? write_fifo : read_fifo)(ep, req); | |
874 | deselect_ep(); | |
875 | if (!is_in) { | |
876 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
877 | ep->ackwait = 1 + ep->double_buf; | |
878 | } | |
879 | /* IN: 6 wait states before it'll tx */ | |
880 | } | |
881 | } | |
882 | } | |
883 | ||
884 | static void dma_channel_release(struct omap_ep *ep) | |
885 | { | |
886 | int shift = 4 * (ep->dma_channel - 1); | |
887 | u16 mask = 0x0f << shift; | |
888 | struct omap_req *req; | |
889 | int active; | |
890 | ||
891 | /* abort any active usb transfer request */ | |
892 | if (!list_empty(&ep->queue)) | |
893 | req = container_of(ep->queue.next, struct omap_req, queue); | |
894 | else | |
313980c9 | 895 | req = NULL; |
1da177e4 LT |
896 | |
897 | active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0; | |
898 | ||
899 | DBG("%s release %s %cxdma%d %p\n", ep->ep.name, | |
900 | active ? "active" : "idle", | |
901 | (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', | |
902 | ep->dma_channel - 1, req); | |
903 | ||
65111084 DB |
904 | /* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before |
905 | * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them. | |
906 | */ | |
907 | ||
1da177e4 LT |
908 | /* wait till current packet DMA finishes, and fifo empties */ |
909 | if (ep->bEndpointAddress & USB_DIR_IN) { | |
65111084 | 910 | UDC_TXDMA_CFG_REG = (UDC_TXDMA_CFG_REG & ~mask) | UDC_DMA_REQ; |
1da177e4 LT |
911 | |
912 | if (req) { | |
913 | finish_in_dma(ep, req, -ECONNRESET); | |
914 | ||
915 | /* clear FIFO; hosts probably won't empty it */ | |
916 | use_ep(ep, UDC_EP_SEL); | |
917 | UDC_CTRL_REG = UDC_CLR_EP; | |
918 | deselect_ep(); | |
919 | } | |
920 | while (UDC_TXDMA_CFG_REG & mask) | |
921 | udelay(10); | |
922 | } else { | |
65111084 | 923 | UDC_RXDMA_CFG_REG = (UDC_RXDMA_CFG_REG & ~mask) | UDC_DMA_REQ; |
1da177e4 LT |
924 | |
925 | /* dma empties the fifo */ | |
926 | while (UDC_RXDMA_CFG_REG & mask) | |
927 | udelay(10); | |
928 | if (req) | |
cb97c5c9 | 929 | finish_out_dma(ep, req, -ECONNRESET, 0); |
1da177e4 LT |
930 | } |
931 | omap_free_dma(ep->lch); | |
932 | ep->dma_channel = 0; | |
933 | ep->lch = -1; | |
934 | /* has_dma still set, till endpoint is fully quiesced */ | |
935 | } | |
936 | ||
937 | ||
938 | /*-------------------------------------------------------------------------*/ | |
939 | ||
940 | static int | |
55016f10 | 941 | omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
1da177e4 LT |
942 | { |
943 | struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); | |
944 | struct omap_req *req = container_of(_req, struct omap_req, req); | |
945 | struct omap_udc *udc; | |
946 | unsigned long flags; | |
947 | int is_iso = 0; | |
948 | ||
949 | /* catch various bogus parameters */ | |
950 | if (!_req || !req->req.complete || !req->req.buf | |
951 | || !list_empty(&req->queue)) { | |
952 | DBG("%s, bad params\n", __FUNCTION__); | |
953 | return -EINVAL; | |
954 | } | |
955 | if (!_ep || (!ep->desc && ep->bEndpointAddress)) { | |
956 | DBG("%s, bad ep\n", __FUNCTION__); | |
957 | return -EINVAL; | |
958 | } | |
959 | if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { | |
960 | if (req->req.length > ep->ep.maxpacket) | |
961 | return -EMSGSIZE; | |
962 | is_iso = 1; | |
963 | } | |
964 | ||
965 | /* this isn't bogus, but OMAP DMA isn't the only hardware to | |
966 | * have a hard time with partial packet reads... reject it. | |
967 | */ | |
968 | if (use_dma | |
969 | && ep->has_dma | |
970 | && ep->bEndpointAddress != 0 | |
971 | && (ep->bEndpointAddress & USB_DIR_IN) == 0 | |
972 | && (req->req.length % ep->ep.maxpacket) != 0) { | |
973 | DBG("%s, no partial packet OUT reads\n", __FUNCTION__); | |
974 | return -EMSGSIZE; | |
975 | } | |
976 | ||
977 | udc = ep->udc; | |
978 | if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) | |
979 | return -ESHUTDOWN; | |
980 | ||
981 | if (use_dma && ep->has_dma) { | |
982 | if (req->req.dma == DMA_ADDR_INVALID) { | |
983 | req->req.dma = dma_map_single( | |
984 | ep->udc->gadget.dev.parent, | |
985 | req->req.buf, | |
986 | req->req.length, | |
987 | (ep->bEndpointAddress & USB_DIR_IN) | |
988 | ? DMA_TO_DEVICE | |
989 | : DMA_FROM_DEVICE); | |
990 | req->mapped = 1; | |
991 | } else { | |
992 | dma_sync_single_for_device( | |
993 | ep->udc->gadget.dev.parent, | |
994 | req->req.dma, req->req.length, | |
995 | (ep->bEndpointAddress & USB_DIR_IN) | |
996 | ? DMA_TO_DEVICE | |
997 | : DMA_FROM_DEVICE); | |
998 | req->mapped = 0; | |
999 | } | |
1000 | } | |
1001 | ||
1002 | VDBG("%s queue req %p, len %d buf %p\n", | |
1003 | ep->ep.name, _req, _req->length, _req->buf); | |
1004 | ||
1005 | spin_lock_irqsave(&udc->lock, flags); | |
1006 | ||
1007 | req->req.status = -EINPROGRESS; | |
1008 | req->req.actual = 0; | |
1009 | ||
1010 | /* maybe kickstart non-iso i/o queues */ | |
1011 | if (is_iso) | |
1012 | UDC_IRQ_EN_REG |= UDC_SOF_IE; | |
1013 | else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) { | |
1014 | int is_in; | |
1015 | ||
1016 | if (ep->bEndpointAddress == 0) { | |
1017 | if (!udc->ep0_pending || !list_empty (&ep->queue)) { | |
1018 | spin_unlock_irqrestore(&udc->lock, flags); | |
1019 | return -EL2HLT; | |
1020 | } | |
1021 | ||
1022 | /* empty DATA stage? */ | |
1023 | is_in = udc->ep0_in; | |
1024 | if (!req->req.length) { | |
1025 | ||
1026 | /* chip became CONFIGURED or ADDRESSED | |
1027 | * earlier; drivers may already have queued | |
1028 | * requests to non-control endpoints | |
1029 | */ | |
1030 | if (udc->ep0_set_config) { | |
1031 | u16 irq_en = UDC_IRQ_EN_REG; | |
1032 | ||
1033 | irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE; | |
1034 | if (!udc->ep0_reset_config) | |
1035 | irq_en |= UDC_EPN_RX_IE | |
1036 | | UDC_EPN_TX_IE; | |
1037 | UDC_IRQ_EN_REG = irq_en; | |
1038 | } | |
1039 | ||
313980c9 DB |
1040 | /* STATUS for zero length DATA stages is |
1041 | * always an IN ... even for IN transfers, | |
1042 | * a wierd case which seem to stall OMAP. | |
1043 | */ | |
1044 | UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR); | |
1da177e4 LT |
1045 | UDC_CTRL_REG = UDC_CLR_EP; |
1046 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
313980c9 | 1047 | UDC_EP_NUM_REG = UDC_EP_DIR; |
1da177e4 LT |
1048 | |
1049 | /* cleanup */ | |
1050 | udc->ep0_pending = 0; | |
1051 | done(ep, req, 0); | |
313980c9 | 1052 | req = NULL; |
1da177e4 LT |
1053 | |
1054 | /* non-empty DATA stage */ | |
1055 | } else if (is_in) { | |
1056 | UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; | |
1057 | } else { | |
1058 | if (udc->ep0_setup) | |
1059 | goto irq_wait; | |
1060 | UDC_EP_NUM_REG = UDC_EP_SEL; | |
1061 | } | |
1062 | } else { | |
1063 | is_in = ep->bEndpointAddress & USB_DIR_IN; | |
1064 | if (!ep->has_dma) | |
1065 | use_ep(ep, UDC_EP_SEL); | |
1066 | /* if ISO: SOF IRQs must be enabled/disabled! */ | |
1067 | } | |
1068 | ||
1069 | if (ep->has_dma) | |
1070 | (is_in ? next_in_dma : next_out_dma)(ep, req); | |
1071 | else if (req) { | |
1072 | if ((is_in ? write_fifo : read_fifo)(ep, req) == 1) | |
313980c9 | 1073 | req = NULL; |
1da177e4 LT |
1074 | deselect_ep(); |
1075 | if (!is_in) { | |
1076 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1077 | ep->ackwait = 1 + ep->double_buf; | |
1078 | } | |
1079 | /* IN: 6 wait states before it'll tx */ | |
1080 | } | |
1081 | } | |
1082 | ||
1083 | irq_wait: | |
1084 | /* irq handler advances the queue */ | |
313980c9 | 1085 | if (req != NULL) |
1da177e4 LT |
1086 | list_add_tail(&req->queue, &ep->queue); |
1087 | spin_unlock_irqrestore(&udc->lock, flags); | |
1088 | ||
1089 | return 0; | |
1090 | } | |
1091 | ||
1092 | static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) | |
1093 | { | |
1094 | struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); | |
1095 | struct omap_req *req; | |
1096 | unsigned long flags; | |
1097 | ||
1098 | if (!_ep || !_req) | |
1099 | return -EINVAL; | |
1100 | ||
1101 | spin_lock_irqsave(&ep->udc->lock, flags); | |
1102 | ||
1103 | /* make sure it's actually queued on this endpoint */ | |
1104 | list_for_each_entry (req, &ep->queue, queue) { | |
1105 | if (&req->req == _req) | |
1106 | break; | |
1107 | } | |
1108 | if (&req->req != _req) { | |
1109 | spin_unlock_irqrestore(&ep->udc->lock, flags); | |
1110 | return -EINVAL; | |
1111 | } | |
1112 | ||
1113 | if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) { | |
1114 | int channel = ep->dma_channel; | |
1115 | ||
1116 | /* releasing the channel cancels the request, | |
1117 | * reclaiming the channel restarts the queue | |
1118 | */ | |
1119 | dma_channel_release(ep); | |
1120 | dma_channel_claim(ep, channel); | |
1121 | } else | |
1122 | done(ep, req, -ECONNRESET); | |
1123 | spin_unlock_irqrestore(&ep->udc->lock, flags); | |
1124 | return 0; | |
1125 | } | |
1126 | ||
1127 | /*-------------------------------------------------------------------------*/ | |
1128 | ||
1129 | static int omap_ep_set_halt(struct usb_ep *_ep, int value) | |
1130 | { | |
1131 | struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); | |
1132 | unsigned long flags; | |
1133 | int status = -EOPNOTSUPP; | |
1134 | ||
1135 | spin_lock_irqsave(&ep->udc->lock, flags); | |
1136 | ||
1137 | /* just use protocol stalls for ep0; real halts are annoying */ | |
1138 | if (ep->bEndpointAddress == 0) { | |
1139 | if (!ep->udc->ep0_pending) | |
1140 | status = -EINVAL; | |
1141 | else if (value) { | |
1142 | if (ep->udc->ep0_set_config) { | |
1143 | WARN("error changing config?\n"); | |
1144 | UDC_SYSCON2_REG = UDC_CLR_CFG; | |
1145 | } | |
1146 | UDC_SYSCON2_REG = UDC_STALL_CMD; | |
1147 | ep->udc->ep0_pending = 0; | |
1148 | status = 0; | |
1149 | } else /* NOP */ | |
1150 | status = 0; | |
1151 | ||
1152 | /* otherwise, all active non-ISO endpoints can halt */ | |
1153 | } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) { | |
1154 | ||
1155 | /* IN endpoints must already be idle */ | |
1156 | if ((ep->bEndpointAddress & USB_DIR_IN) | |
1157 | && !list_empty(&ep->queue)) { | |
1158 | status = -EAGAIN; | |
1159 | goto done; | |
1160 | } | |
1161 | ||
1162 | if (value) { | |
1163 | int channel; | |
1164 | ||
1165 | if (use_dma && ep->dma_channel | |
1166 | && !list_empty(&ep->queue)) { | |
1167 | channel = ep->dma_channel; | |
1168 | dma_channel_release(ep); | |
1169 | } else | |
1170 | channel = 0; | |
1171 | ||
1172 | use_ep(ep, UDC_EP_SEL); | |
1173 | if (UDC_STAT_FLG_REG & UDC_NON_ISO_FIFO_EMPTY) { | |
1174 | UDC_CTRL_REG = UDC_SET_HALT; | |
1175 | status = 0; | |
1176 | } else | |
1177 | status = -EAGAIN; | |
1178 | deselect_ep(); | |
1179 | ||
1180 | if (channel) | |
1181 | dma_channel_claim(ep, channel); | |
1182 | } else { | |
1183 | use_ep(ep, 0); | |
65111084 | 1184 | UDC_CTRL_REG = ep->udc->clr_halt; |
1da177e4 LT |
1185 | ep->ackwait = 0; |
1186 | if (!(ep->bEndpointAddress & USB_DIR_IN)) { | |
1187 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1188 | ep->ackwait = 1 + ep->double_buf; | |
1189 | } | |
1190 | } | |
1191 | } | |
1192 | done: | |
1193 | VDBG("%s %s halt stat %d\n", ep->ep.name, | |
1194 | value ? "set" : "clear", status); | |
1195 | ||
1196 | spin_unlock_irqrestore(&ep->udc->lock, flags); | |
1197 | return status; | |
1198 | } | |
1199 | ||
1200 | static struct usb_ep_ops omap_ep_ops = { | |
1201 | .enable = omap_ep_enable, | |
1202 | .disable = omap_ep_disable, | |
1203 | ||
1204 | .alloc_request = omap_alloc_request, | |
1205 | .free_request = omap_free_request, | |
1206 | ||
1207 | .alloc_buffer = omap_alloc_buffer, | |
1208 | .free_buffer = omap_free_buffer, | |
1209 | ||
1210 | .queue = omap_ep_queue, | |
1211 | .dequeue = omap_ep_dequeue, | |
1212 | ||
1213 | .set_halt = omap_ep_set_halt, | |
1214 | // fifo_status ... report bytes in fifo | |
1215 | // fifo_flush ... flush fifo | |
1216 | }; | |
1217 | ||
1218 | /*-------------------------------------------------------------------------*/ | |
1219 | ||
1220 | static int omap_get_frame(struct usb_gadget *gadget) | |
1221 | { | |
1222 | u16 sof = UDC_SOF_REG; | |
1223 | return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC; | |
1224 | } | |
1225 | ||
1226 | static int omap_wakeup(struct usb_gadget *gadget) | |
1227 | { | |
1228 | struct omap_udc *udc; | |
1229 | unsigned long flags; | |
1230 | int retval = -EHOSTUNREACH; | |
1231 | ||
1232 | udc = container_of(gadget, struct omap_udc, gadget); | |
1233 | ||
1234 | spin_lock_irqsave(&udc->lock, flags); | |
1235 | if (udc->devstat & UDC_SUS) { | |
1236 | /* NOTE: OTG spec erratum says that OTG devices may | |
1237 | * issue wakeups without host enable. | |
1238 | */ | |
1239 | if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) { | |
1240 | DBG("remote wakeup...\n"); | |
1241 | UDC_SYSCON2_REG = UDC_RMT_WKP; | |
1242 | retval = 0; | |
1243 | } | |
1244 | ||
1245 | /* NOTE: non-OTG systems may use SRP TOO... */ | |
1246 | } else if (!(udc->devstat & UDC_ATT)) { | |
1247 | if (udc->transceiver) | |
1248 | retval = otg_start_srp(udc->transceiver); | |
1249 | } | |
1250 | spin_unlock_irqrestore(&udc->lock, flags); | |
1251 | ||
1252 | return retval; | |
1253 | } | |
1254 | ||
1255 | static int | |
1256 | omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) | |
1257 | { | |
1258 | struct omap_udc *udc; | |
1259 | unsigned long flags; | |
1260 | u16 syscon1; | |
1261 | ||
1262 | udc = container_of(gadget, struct omap_udc, gadget); | |
1263 | spin_lock_irqsave(&udc->lock, flags); | |
1264 | syscon1 = UDC_SYSCON1_REG; | |
1265 | if (is_selfpowered) | |
1266 | syscon1 |= UDC_SELF_PWR; | |
1267 | else | |
1268 | syscon1 &= ~UDC_SELF_PWR; | |
1269 | UDC_SYSCON1_REG = syscon1; | |
1270 | spin_unlock_irqrestore(&udc->lock, flags); | |
1271 | ||
1272 | return 0; | |
1273 | } | |
1274 | ||
1275 | static int can_pullup(struct omap_udc *udc) | |
1276 | { | |
1277 | return udc->driver && udc->softconnect && udc->vbus_active; | |
1278 | } | |
1279 | ||
1280 | static void pullup_enable(struct omap_udc *udc) | |
1281 | { | |
313980c9 DB |
1282 | udc->gadget.dev.parent->power.power_state = PMSG_ON; |
1283 | udc->gadget.dev.power.power_state = PMSG_ON; | |
1da177e4 LT |
1284 | UDC_SYSCON1_REG |= UDC_PULLUP_EN; |
1285 | #ifndef CONFIG_USB_OTG | |
1286 | if (!cpu_is_omap15xx()) | |
1287 | OTG_CTRL_REG |= OTG_BSESSVLD; | |
1288 | #endif | |
1289 | UDC_IRQ_EN_REG = UDC_DS_CHG_IE; | |
1290 | } | |
1291 | ||
1292 | static void pullup_disable(struct omap_udc *udc) | |
1293 | { | |
1294 | #ifndef CONFIG_USB_OTG | |
1295 | if (!cpu_is_omap15xx()) | |
1296 | OTG_CTRL_REG &= ~OTG_BSESSVLD; | |
1297 | #endif | |
1298 | UDC_IRQ_EN_REG = UDC_DS_CHG_IE; | |
1299 | UDC_SYSCON1_REG &= ~UDC_PULLUP_EN; | |
1300 | } | |
1301 | ||
1302 | /* | |
1303 | * Called by whatever detects VBUS sessions: external transceiver | |
1304 | * driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock. | |
1305 | */ | |
1306 | static int omap_vbus_session(struct usb_gadget *gadget, int is_active) | |
1307 | { | |
1308 | struct omap_udc *udc; | |
1309 | unsigned long flags; | |
1310 | ||
1311 | udc = container_of(gadget, struct omap_udc, gadget); | |
1312 | spin_lock_irqsave(&udc->lock, flags); | |
1313 | VDBG("VBUS %s\n", is_active ? "on" : "off"); | |
1314 | udc->vbus_active = (is_active != 0); | |
1315 | if (cpu_is_omap15xx()) { | |
1316 | /* "software" detect, ignored if !VBUS_MODE_1510 */ | |
1317 | if (is_active) | |
1318 | FUNC_MUX_CTRL_0_REG |= VBUS_CTRL_1510; | |
1319 | else | |
1320 | FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510; | |
1321 | } | |
1322 | if (can_pullup(udc)) | |
1323 | pullup_enable(udc); | |
1324 | else | |
1325 | pullup_disable(udc); | |
1326 | spin_unlock_irqrestore(&udc->lock, flags); | |
1327 | return 0; | |
1328 | } | |
1329 | ||
1330 | static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA) | |
1331 | { | |
1332 | struct omap_udc *udc; | |
1333 | ||
1334 | udc = container_of(gadget, struct omap_udc, gadget); | |
1335 | if (udc->transceiver) | |
1336 | return otg_set_power(udc->transceiver, mA); | |
1337 | return -EOPNOTSUPP; | |
1338 | } | |
1339 | ||
1340 | static int omap_pullup(struct usb_gadget *gadget, int is_on) | |
1341 | { | |
1342 | struct omap_udc *udc; | |
1343 | unsigned long flags; | |
1344 | ||
1345 | udc = container_of(gadget, struct omap_udc, gadget); | |
1346 | spin_lock_irqsave(&udc->lock, flags); | |
1347 | udc->softconnect = (is_on != 0); | |
1348 | if (can_pullup(udc)) | |
1349 | pullup_enable(udc); | |
1350 | else | |
1351 | pullup_disable(udc); | |
1352 | spin_unlock_irqrestore(&udc->lock, flags); | |
1353 | return 0; | |
1354 | } | |
1355 | ||
1356 | static struct usb_gadget_ops omap_gadget_ops = { | |
1357 | .get_frame = omap_get_frame, | |
1358 | .wakeup = omap_wakeup, | |
1359 | .set_selfpowered = omap_set_selfpowered, | |
1360 | .vbus_session = omap_vbus_session, | |
1361 | .vbus_draw = omap_vbus_draw, | |
1362 | .pullup = omap_pullup, | |
1363 | }; | |
1364 | ||
1365 | /*-------------------------------------------------------------------------*/ | |
1366 | ||
1367 | /* dequeue ALL requests; caller holds udc->lock */ | |
1368 | static void nuke(struct omap_ep *ep, int status) | |
1369 | { | |
1370 | struct omap_req *req; | |
1371 | ||
1372 | ep->stopped = 1; | |
1373 | ||
1374 | if (use_dma && ep->dma_channel) | |
1375 | dma_channel_release(ep); | |
1376 | ||
1377 | use_ep(ep, 0); | |
1378 | UDC_CTRL_REG = UDC_CLR_EP; | |
1379 | if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC) | |
1380 | UDC_CTRL_REG = UDC_SET_HALT; | |
1381 | ||
1382 | while (!list_empty(&ep->queue)) { | |
1383 | req = list_entry(ep->queue.next, struct omap_req, queue); | |
1384 | done(ep, req, status); | |
1385 | } | |
1386 | } | |
1387 | ||
1388 | /* caller holds udc->lock */ | |
1389 | static void udc_quiesce(struct omap_udc *udc) | |
1390 | { | |
1391 | struct omap_ep *ep; | |
1392 | ||
1393 | udc->gadget.speed = USB_SPEED_UNKNOWN; | |
1394 | nuke(&udc->ep[0], -ESHUTDOWN); | |
1395 | list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) | |
1396 | nuke(ep, -ESHUTDOWN); | |
1397 | } | |
1398 | ||
1399 | /*-------------------------------------------------------------------------*/ | |
1400 | ||
1401 | static void update_otg(struct omap_udc *udc) | |
1402 | { | |
1403 | u16 devstat; | |
1404 | ||
1405 | if (!udc->gadget.is_otg) | |
1406 | return; | |
1407 | ||
1408 | if (OTG_CTRL_REG & OTG_ID) | |
1409 | devstat = UDC_DEVSTAT_REG; | |
1410 | else | |
1411 | devstat = 0; | |
1412 | ||
1413 | udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE); | |
1414 | udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT); | |
1415 | udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT); | |
1416 | ||
1417 | /* Enable HNP early, avoiding races on suspend irq path. | |
1418 | * ASSUMES OTG state machine B_BUS_REQ input is true. | |
1419 | */ | |
1420 | if (udc->gadget.b_hnp_enable) | |
1421 | OTG_CTRL_REG = (OTG_CTRL_REG | OTG_B_HNPEN | OTG_B_BUSREQ) | |
1422 | & ~OTG_PULLUP; | |
1423 | } | |
1424 | ||
1425 | static void ep0_irq(struct omap_udc *udc, u16 irq_src) | |
1426 | { | |
1427 | struct omap_ep *ep0 = &udc->ep[0]; | |
313980c9 | 1428 | struct omap_req *req = NULL; |
1da177e4 LT |
1429 | |
1430 | ep0->irqs++; | |
1431 | ||
1432 | /* Clear any pending requests and then scrub any rx/tx state | |
1433 | * before starting to handle the SETUP request. | |
1434 | */ | |
1435 | if (irq_src & UDC_SETUP) { | |
1436 | u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX); | |
1437 | ||
1438 | nuke(ep0, 0); | |
1439 | if (ack) { | |
1440 | UDC_IRQ_SRC_REG = ack; | |
1441 | irq_src = UDC_SETUP; | |
1442 | } | |
1443 | } | |
1444 | ||
1445 | /* IN/OUT packets mean we're in the DATA or STATUS stage. | |
1446 | * This driver uses only uses protocol stalls (ep0 never halts), | |
1447 | * and if we got this far the gadget driver already had a | |
1448 | * chance to stall. Tries to be forgiving of host oddities. | |
1449 | * | |
1450 | * NOTE: the last chance gadget drivers have to stall control | |
1451 | * requests is during their request completion callback. | |
1452 | */ | |
1453 | if (!list_empty(&ep0->queue)) | |
1454 | req = container_of(ep0->queue.next, struct omap_req, queue); | |
1455 | ||
1456 | /* IN == TX to host */ | |
1457 | if (irq_src & UDC_EP0_TX) { | |
1458 | int stat; | |
1459 | ||
1460 | UDC_IRQ_SRC_REG = UDC_EP0_TX; | |
1461 | UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; | |
1462 | stat = UDC_STAT_FLG_REG; | |
1463 | if (stat & UDC_ACK) { | |
1464 | if (udc->ep0_in) { | |
1465 | /* write next IN packet from response, | |
1466 | * or set up the status stage. | |
1467 | */ | |
1468 | if (req) | |
1469 | stat = write_fifo(ep0, req); | |
1470 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1471 | if (!req && udc->ep0_pending) { | |
1472 | UDC_EP_NUM_REG = UDC_EP_SEL; | |
1473 | UDC_CTRL_REG = UDC_CLR_EP; | |
1474 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1475 | UDC_EP_NUM_REG = 0; | |
1476 | udc->ep0_pending = 0; | |
1477 | } /* else: 6 wait states before it'll tx */ | |
1478 | } else { | |
1479 | /* ack status stage of OUT transfer */ | |
1480 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1481 | if (req) | |
1482 | done(ep0, req, 0); | |
1483 | } | |
313980c9 | 1484 | req = NULL; |
1da177e4 LT |
1485 | } else if (stat & UDC_STALL) { |
1486 | UDC_CTRL_REG = UDC_CLR_HALT; | |
1487 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1488 | } else { | |
1489 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1490 | } | |
1491 | } | |
1492 | ||
1493 | /* OUT == RX from host */ | |
1494 | if (irq_src & UDC_EP0_RX) { | |
1495 | int stat; | |
1496 | ||
1497 | UDC_IRQ_SRC_REG = UDC_EP0_RX; | |
1498 | UDC_EP_NUM_REG = UDC_EP_SEL; | |
1499 | stat = UDC_STAT_FLG_REG; | |
1500 | if (stat & UDC_ACK) { | |
1501 | if (!udc->ep0_in) { | |
1502 | stat = 0; | |
1503 | /* read next OUT packet of request, maybe | |
1504 | * reactiviting the fifo; stall on errors. | |
1505 | */ | |
1506 | if (!req || (stat = read_fifo(ep0, req)) < 0) { | |
1507 | UDC_SYSCON2_REG = UDC_STALL_CMD; | |
1508 | udc->ep0_pending = 0; | |
1509 | stat = 0; | |
1510 | } else if (stat == 0) | |
1511 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1512 | UDC_EP_NUM_REG = 0; | |
1513 | ||
1514 | /* activate status stage */ | |
1515 | if (stat == 1) { | |
1516 | done(ep0, req, 0); | |
1517 | /* that may have STALLed ep0... */ | |
1518 | UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; | |
1519 | UDC_CTRL_REG = UDC_CLR_EP; | |
1520 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1521 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1522 | udc->ep0_pending = 0; | |
1523 | } | |
1524 | } else { | |
1525 | /* ack status stage of IN transfer */ | |
1526 | UDC_EP_NUM_REG = 0; | |
1527 | if (req) | |
1528 | done(ep0, req, 0); | |
1529 | } | |
1530 | } else if (stat & UDC_STALL) { | |
1531 | UDC_CTRL_REG = UDC_CLR_HALT; | |
1532 | UDC_EP_NUM_REG = 0; | |
1533 | } else { | |
1534 | UDC_EP_NUM_REG = 0; | |
1535 | } | |
1536 | } | |
1537 | ||
1538 | /* SETUP starts all control transfers */ | |
1539 | if (irq_src & UDC_SETUP) { | |
1540 | union u { | |
1541 | u16 word[4]; | |
1542 | struct usb_ctrlrequest r; | |
1543 | } u; | |
1544 | int status = -EINVAL; | |
1545 | struct omap_ep *ep; | |
1546 | ||
1547 | /* read the (latest) SETUP message */ | |
1548 | do { | |
1549 | UDC_EP_NUM_REG = UDC_SETUP_SEL; | |
1550 | /* two bytes at a time */ | |
1551 | u.word[0] = UDC_DATA_REG; | |
1552 | u.word[1] = UDC_DATA_REG; | |
1553 | u.word[2] = UDC_DATA_REG; | |
1554 | u.word[3] = UDC_DATA_REG; | |
1555 | UDC_EP_NUM_REG = 0; | |
1556 | } while (UDC_IRQ_SRC_REG & UDC_SETUP); | |
1da177e4 | 1557 | |
65111084 DB |
1558 | #define w_value le16_to_cpup (&u.r.wValue) |
1559 | #define w_index le16_to_cpup (&u.r.wIndex) | |
1560 | #define w_length le16_to_cpup (&u.r.wLength) | |
1561 | ||
1da177e4 LT |
1562 | /* Delegate almost all control requests to the gadget driver, |
1563 | * except for a handful of ch9 status/feature requests that | |
1564 | * hardware doesn't autodecode _and_ the gadget API hides. | |
1565 | */ | |
1566 | udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0; | |
1567 | udc->ep0_set_config = 0; | |
1568 | udc->ep0_pending = 1; | |
1569 | ep0->stopped = 0; | |
1570 | ep0->ackwait = 0; | |
1571 | switch (u.r.bRequest) { | |
1572 | case USB_REQ_SET_CONFIGURATION: | |
1573 | /* udc needs to know when ep != 0 is valid */ | |
1574 | if (u.r.bRequestType != USB_RECIP_DEVICE) | |
1575 | goto delegate; | |
65111084 | 1576 | if (w_length != 0) |
1da177e4 LT |
1577 | goto do_stall; |
1578 | udc->ep0_set_config = 1; | |
65111084 DB |
1579 | udc->ep0_reset_config = (w_value == 0); |
1580 | VDBG("set config %d\n", w_value); | |
1da177e4 LT |
1581 | |
1582 | /* update udc NOW since gadget driver may start | |
1583 | * queueing requests immediately; clear config | |
1584 | * later if it fails the request. | |
1585 | */ | |
1586 | if (udc->ep0_reset_config) | |
1587 | UDC_SYSCON2_REG = UDC_CLR_CFG; | |
1588 | else | |
1589 | UDC_SYSCON2_REG = UDC_DEV_CFG; | |
1590 | update_otg(udc); | |
1591 | goto delegate; | |
1592 | case USB_REQ_CLEAR_FEATURE: | |
1593 | /* clear endpoint halt */ | |
1594 | if (u.r.bRequestType != USB_RECIP_ENDPOINT) | |
1595 | goto delegate; | |
65111084 DB |
1596 | if (w_value != USB_ENDPOINT_HALT |
1597 | || w_length != 0) | |
1da177e4 | 1598 | goto do_stall; |
65111084 | 1599 | ep = &udc->ep[w_index & 0xf]; |
1da177e4 | 1600 | if (ep != ep0) { |
65111084 | 1601 | if (w_index & USB_DIR_IN) |
1da177e4 LT |
1602 | ep += 16; |
1603 | if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC | |
1604 | || !ep->desc) | |
1605 | goto do_stall; | |
1606 | use_ep(ep, 0); | |
65111084 | 1607 | UDC_CTRL_REG = udc->clr_halt; |
1da177e4 LT |
1608 | ep->ackwait = 0; |
1609 | if (!(ep->bEndpointAddress & USB_DIR_IN)) { | |
1610 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1611 | ep->ackwait = 1 + ep->double_buf; | |
1612 | } | |
313980c9 DB |
1613 | /* NOTE: assumes the host behaves sanely, |
1614 | * only clearing real halts. Else we may | |
1615 | * need to kill pending transfers and then | |
1616 | * restart the queue... very messy for DMA! | |
1617 | */ | |
1da177e4 LT |
1618 | } |
1619 | VDBG("%s halt cleared by host\n", ep->name); | |
1620 | goto ep0out_status_stage; | |
1621 | case USB_REQ_SET_FEATURE: | |
1622 | /* set endpoint halt */ | |
1623 | if (u.r.bRequestType != USB_RECIP_ENDPOINT) | |
1624 | goto delegate; | |
65111084 DB |
1625 | if (w_value != USB_ENDPOINT_HALT |
1626 | || w_length != 0) | |
1da177e4 | 1627 | goto do_stall; |
65111084 DB |
1628 | ep = &udc->ep[w_index & 0xf]; |
1629 | if (w_index & USB_DIR_IN) | |
1da177e4 LT |
1630 | ep += 16; |
1631 | if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC | |
1632 | || ep == ep0 || !ep->desc) | |
1633 | goto do_stall; | |
1634 | if (use_dma && ep->has_dma) { | |
1635 | /* this has rude side-effects (aborts) and | |
1636 | * can't really work if DMA-IN is active | |
1637 | */ | |
1638 | DBG("%s host set_halt, NYET \n", ep->name); | |
1639 | goto do_stall; | |
1640 | } | |
1641 | use_ep(ep, 0); | |
1642 | /* can't halt if fifo isn't empty... */ | |
1643 | UDC_CTRL_REG = UDC_CLR_EP; | |
1644 | UDC_CTRL_REG = UDC_SET_HALT; | |
1645 | VDBG("%s halted by host\n", ep->name); | |
1646 | ep0out_status_stage: | |
1647 | status = 0; | |
1648 | UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; | |
1649 | UDC_CTRL_REG = UDC_CLR_EP; | |
1650 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1651 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1652 | udc->ep0_pending = 0; | |
1653 | break; | |
1654 | case USB_REQ_GET_STATUS: | |
1655 | /* return interface status. if we were pedantic, | |
1656 | * we'd detect non-existent interfaces, and stall. | |
1657 | */ | |
1658 | if (u.r.bRequestType | |
1659 | != (USB_DIR_IN|USB_RECIP_INTERFACE)) | |
1660 | goto delegate; | |
1661 | /* return two zero bytes */ | |
1662 | UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; | |
1663 | UDC_DATA_REG = 0; | |
1664 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1665 | UDC_EP_NUM_REG = UDC_EP_DIR; | |
1666 | status = 0; | |
65111084 | 1667 | VDBG("GET_STATUS, interface %d\n", w_index); |
1da177e4 LT |
1668 | /* next, status stage */ |
1669 | break; | |
1670 | default: | |
1671 | delegate: | |
1672 | /* activate the ep0out fifo right away */ | |
65111084 | 1673 | if (!udc->ep0_in && w_length) { |
1da177e4 LT |
1674 | UDC_EP_NUM_REG = 0; |
1675 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1676 | } | |
1677 | ||
1678 | /* gadget drivers see class/vendor specific requests, | |
1679 | * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION}, | |
1680 | * and more | |
1681 | */ | |
1682 | VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n", | |
1683 | u.r.bRequestType, u.r.bRequest, | |
65111084 DB |
1684 | w_value, w_index, w_length); |
1685 | ||
1686 | #undef w_value | |
1687 | #undef w_index | |
1688 | #undef w_length | |
1da177e4 LT |
1689 | |
1690 | /* The gadget driver may return an error here, | |
1691 | * causing an immediate protocol stall. | |
1692 | * | |
1693 | * Else it must issue a response, either queueing a | |
1694 | * response buffer for the DATA stage, or halting ep0 | |
1695 | * (causing a protocol stall, not a real halt). A | |
1696 | * zero length buffer means no DATA stage. | |
1697 | * | |
1698 | * It's fine to issue that response after the setup() | |
1699 | * call returns, and this IRQ was handled. | |
1700 | */ | |
1701 | udc->ep0_setup = 1; | |
1702 | spin_unlock(&udc->lock); | |
1703 | status = udc->driver->setup (&udc->gadget, &u.r); | |
1704 | spin_lock(&udc->lock); | |
1705 | udc->ep0_setup = 0; | |
1706 | } | |
1707 | ||
1708 | if (status < 0) { | |
1709 | do_stall: | |
1710 | VDBG("req %02x.%02x protocol STALL; stat %d\n", | |
1711 | u.r.bRequestType, u.r.bRequest, status); | |
1712 | if (udc->ep0_set_config) { | |
1713 | if (udc->ep0_reset_config) | |
1714 | WARN("error resetting config?\n"); | |
1715 | else | |
1716 | UDC_SYSCON2_REG = UDC_CLR_CFG; | |
1717 | } | |
1718 | UDC_SYSCON2_REG = UDC_STALL_CMD; | |
1719 | udc->ep0_pending = 0; | |
1720 | } | |
1721 | } | |
1722 | } | |
1723 | ||
1724 | /*-------------------------------------------------------------------------*/ | |
1725 | ||
1726 | #define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT) | |
1727 | ||
1728 | static void devstate_irq(struct omap_udc *udc, u16 irq_src) | |
1729 | { | |
1730 | u16 devstat, change; | |
1731 | ||
1732 | devstat = UDC_DEVSTAT_REG; | |
1733 | change = devstat ^ udc->devstat; | |
1734 | udc->devstat = devstat; | |
1735 | ||
1736 | if (change & (UDC_USB_RESET|UDC_ATT)) { | |
1737 | udc_quiesce(udc); | |
1738 | ||
1739 | if (change & UDC_ATT) { | |
1740 | /* driver for any external transceiver will | |
1741 | * have called omap_vbus_session() already | |
1742 | */ | |
1743 | if (devstat & UDC_ATT) { | |
1744 | udc->gadget.speed = USB_SPEED_FULL; | |
1745 | VDBG("connect\n"); | |
1746 | if (!udc->transceiver) | |
1747 | pullup_enable(udc); | |
1748 | // if (driver->connect) call it | |
1749 | } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) { | |
1750 | udc->gadget.speed = USB_SPEED_UNKNOWN; | |
1751 | if (!udc->transceiver) | |
1752 | pullup_disable(udc); | |
1753 | DBG("disconnect, gadget %s\n", | |
1754 | udc->driver->driver.name); | |
1755 | if (udc->driver->disconnect) { | |
1756 | spin_unlock(&udc->lock); | |
1757 | udc->driver->disconnect(&udc->gadget); | |
1758 | spin_lock(&udc->lock); | |
1759 | } | |
1760 | } | |
1761 | change &= ~UDC_ATT; | |
1762 | } | |
1763 | ||
1764 | if (change & UDC_USB_RESET) { | |
1765 | if (devstat & UDC_USB_RESET) { | |
1766 | VDBG("RESET=1\n"); | |
1767 | } else { | |
1768 | udc->gadget.speed = USB_SPEED_FULL; | |
1769 | INFO("USB reset done, gadget %s\n", | |
1770 | udc->driver->driver.name); | |
1771 | /* ep0 traffic is legal from now on */ | |
1772 | UDC_IRQ_EN_REG = UDC_DS_CHG_IE | UDC_EP0_IE; | |
1773 | } | |
1774 | change &= ~UDC_USB_RESET; | |
1775 | } | |
1776 | } | |
1777 | if (change & UDC_SUS) { | |
1778 | if (udc->gadget.speed != USB_SPEED_UNKNOWN) { | |
1779 | // FIXME tell isp1301 to suspend/resume (?) | |
1780 | if (devstat & UDC_SUS) { | |
1781 | VDBG("suspend\n"); | |
1782 | update_otg(udc); | |
1783 | /* HNP could be under way already */ | |
1784 | if (udc->gadget.speed == USB_SPEED_FULL | |
1785 | && udc->driver->suspend) { | |
1786 | spin_unlock(&udc->lock); | |
1787 | udc->driver->suspend(&udc->gadget); | |
1788 | spin_lock(&udc->lock); | |
1789 | } | |
4e67185a JY |
1790 | if (udc->transceiver) |
1791 | otg_set_suspend(udc->transceiver, 1); | |
1da177e4 LT |
1792 | } else { |
1793 | VDBG("resume\n"); | |
4e67185a JY |
1794 | if (udc->transceiver) |
1795 | otg_set_suspend(udc->transceiver, 0); | |
1da177e4 LT |
1796 | if (udc->gadget.speed == USB_SPEED_FULL |
1797 | && udc->driver->resume) { | |
1798 | spin_unlock(&udc->lock); | |
1799 | udc->driver->resume(&udc->gadget); | |
1800 | spin_lock(&udc->lock); | |
1801 | } | |
1802 | } | |
1803 | } | |
1804 | change &= ~UDC_SUS; | |
1805 | } | |
1806 | if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) { | |
1807 | update_otg(udc); | |
1808 | change &= ~OTG_FLAGS; | |
1809 | } | |
1810 | ||
1811 | change &= ~(UDC_CFG|UDC_DEF|UDC_ADD); | |
1812 | if (change) | |
1813 | VDBG("devstat %03x, ignore change %03x\n", | |
1814 | devstat, change); | |
1815 | ||
1816 | UDC_IRQ_SRC_REG = UDC_DS_CHG; | |
1817 | } | |
1818 | ||
1819 | static irqreturn_t | |
1820 | omap_udc_irq(int irq, void *_udc, struct pt_regs *r) | |
1821 | { | |
1822 | struct omap_udc *udc = _udc; | |
1823 | u16 irq_src; | |
1824 | irqreturn_t status = IRQ_NONE; | |
1825 | unsigned long flags; | |
1826 | ||
1827 | spin_lock_irqsave(&udc->lock, flags); | |
1828 | irq_src = UDC_IRQ_SRC_REG; | |
1829 | ||
1830 | /* Device state change (usb ch9 stuff) */ | |
1831 | if (irq_src & UDC_DS_CHG) { | |
1832 | devstate_irq(_udc, irq_src); | |
1833 | status = IRQ_HANDLED; | |
1834 | irq_src &= ~UDC_DS_CHG; | |
1835 | } | |
1836 | ||
1837 | /* EP0 control transfers */ | |
1838 | if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) { | |
1839 | ep0_irq(_udc, irq_src); | |
1840 | status = IRQ_HANDLED; | |
1841 | irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX); | |
1842 | } | |
1843 | ||
1844 | /* DMA transfer completion */ | |
1845 | if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) { | |
1846 | dma_irq(_udc, irq_src); | |
1847 | status = IRQ_HANDLED; | |
1848 | irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT); | |
1849 | } | |
1850 | ||
1851 | irq_src &= ~(UDC_SOF|UDC_EPN_TX|UDC_EPN_RX); | |
1852 | if (irq_src) | |
1853 | DBG("udc_irq, unhandled %03x\n", irq_src); | |
1854 | spin_unlock_irqrestore(&udc->lock, flags); | |
1855 | ||
1856 | return status; | |
1857 | } | |
1858 | ||
1859 | /* workaround for seemingly-lost IRQs for RX ACKs... */ | |
1860 | #define PIO_OUT_TIMEOUT (jiffies + HZ/3) | |
1861 | #define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY))) | |
1862 | ||
1863 | static void pio_out_timer(unsigned long _ep) | |
1864 | { | |
1865 | struct omap_ep *ep = (void *) _ep; | |
1866 | unsigned long flags; | |
1867 | u16 stat_flg; | |
1868 | ||
1869 | spin_lock_irqsave(&ep->udc->lock, flags); | |
1870 | if (!list_empty(&ep->queue) && ep->ackwait) { | |
1871 | use_ep(ep, 0); | |
1872 | stat_flg = UDC_STAT_FLG_REG; | |
1873 | ||
1874 | if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN) | |
1875 | || (ep->double_buf && HALF_FULL(stat_flg)))) { | |
1876 | struct omap_req *req; | |
1877 | ||
1878 | VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg); | |
1879 | req = container_of(ep->queue.next, | |
1880 | struct omap_req, queue); | |
1881 | UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL; | |
1882 | (void) read_fifo(ep, req); | |
1883 | UDC_EP_NUM_REG = ep->bEndpointAddress; | |
1884 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1885 | ep->ackwait = 1 + ep->double_buf; | |
1886 | } | |
1887 | } | |
1888 | mod_timer(&ep->timer, PIO_OUT_TIMEOUT); | |
1889 | spin_unlock_irqrestore(&ep->udc->lock, flags); | |
1890 | } | |
1891 | ||
1892 | static irqreturn_t | |
1893 | omap_udc_pio_irq(int irq, void *_dev, struct pt_regs *r) | |
1894 | { | |
1895 | u16 epn_stat, irq_src; | |
1896 | irqreturn_t status = IRQ_NONE; | |
1897 | struct omap_ep *ep; | |
1898 | int epnum; | |
1899 | struct omap_udc *udc = _dev; | |
1900 | struct omap_req *req; | |
1901 | unsigned long flags; | |
1902 | ||
1903 | spin_lock_irqsave(&udc->lock, flags); | |
1904 | epn_stat = UDC_EPN_STAT_REG; | |
1905 | irq_src = UDC_IRQ_SRC_REG; | |
1906 | ||
1907 | /* handle OUT first, to avoid some wasteful NAKs */ | |
1908 | if (irq_src & UDC_EPN_RX) { | |
1909 | epnum = (epn_stat >> 8) & 0x0f; | |
1910 | UDC_IRQ_SRC_REG = UDC_EPN_RX; | |
1911 | status = IRQ_HANDLED; | |
1912 | ep = &udc->ep[epnum]; | |
1913 | ep->irqs++; | |
1914 | ||
1915 | UDC_EP_NUM_REG = epnum | UDC_EP_SEL; | |
1916 | ep->fnf = 0; | |
1917 | if ((UDC_STAT_FLG_REG & UDC_ACK)) { | |
1918 | ep->ackwait--; | |
1919 | if (!list_empty(&ep->queue)) { | |
1920 | int stat; | |
1921 | req = container_of(ep->queue.next, | |
1922 | struct omap_req, queue); | |
1923 | stat = read_fifo(ep, req); | |
1924 | if (!ep->double_buf) | |
1925 | ep->fnf = 1; | |
1926 | } | |
1927 | } | |
1928 | /* min 6 clock delay before clearing EP_SEL ... */ | |
1929 | epn_stat = UDC_EPN_STAT_REG; | |
1930 | epn_stat = UDC_EPN_STAT_REG; | |
1931 | UDC_EP_NUM_REG = epnum; | |
1932 | ||
1933 | /* enabling fifo _after_ clearing ACK, contrary to docs, | |
1934 | * reduces lossage; timer still needed though (sigh). | |
1935 | */ | |
1936 | if (ep->fnf) { | |
1937 | UDC_CTRL_REG = UDC_SET_FIFO_EN; | |
1938 | ep->ackwait = 1 + ep->double_buf; | |
1939 | } | |
1940 | mod_timer(&ep->timer, PIO_OUT_TIMEOUT); | |
1941 | } | |
1942 | ||
1943 | /* then IN transfers */ | |
1944 | else if (irq_src & UDC_EPN_TX) { | |
1945 | epnum = epn_stat & 0x0f; | |
1946 | UDC_IRQ_SRC_REG = UDC_EPN_TX; | |
1947 | status = IRQ_HANDLED; | |
1948 | ep = &udc->ep[16 + epnum]; | |
1949 | ep->irqs++; | |
1950 | ||
1951 | UDC_EP_NUM_REG = epnum | UDC_EP_DIR | UDC_EP_SEL; | |
1952 | if ((UDC_STAT_FLG_REG & UDC_ACK)) { | |
1953 | ep->ackwait = 0; | |
1954 | if (!list_empty(&ep->queue)) { | |
1955 | req = container_of(ep->queue.next, | |
1956 | struct omap_req, queue); | |
1957 | (void) write_fifo(ep, req); | |
1958 | } | |
1959 | } | |
1960 | /* min 6 clock delay before clearing EP_SEL ... */ | |
1961 | epn_stat = UDC_EPN_STAT_REG; | |
1962 | epn_stat = UDC_EPN_STAT_REG; | |
1963 | UDC_EP_NUM_REG = epnum | UDC_EP_DIR; | |
1964 | /* then 6 clocks before it'd tx */ | |
1965 | } | |
1966 | ||
1967 | spin_unlock_irqrestore(&udc->lock, flags); | |
1968 | return status; | |
1969 | } | |
1970 | ||
1971 | #ifdef USE_ISO | |
1972 | static irqreturn_t | |
1973 | omap_udc_iso_irq(int irq, void *_dev, struct pt_regs *r) | |
1974 | { | |
1975 | struct omap_udc *udc = _dev; | |
1976 | struct omap_ep *ep; | |
1977 | int pending = 0; | |
1978 | unsigned long flags; | |
1979 | ||
1980 | spin_lock_irqsave(&udc->lock, flags); | |
1981 | ||
1982 | /* handle all non-DMA ISO transfers */ | |
1983 | list_for_each_entry (ep, &udc->iso, iso) { | |
1984 | u16 stat; | |
1985 | struct omap_req *req; | |
1986 | ||
1987 | if (ep->has_dma || list_empty(&ep->queue)) | |
1988 | continue; | |
1989 | req = list_entry(ep->queue.next, struct omap_req, queue); | |
1990 | ||
1991 | use_ep(ep, UDC_EP_SEL); | |
1992 | stat = UDC_STAT_FLG_REG; | |
1993 | ||
1994 | /* NOTE: like the other controller drivers, this isn't | |
1995 | * currently reporting lost or damaged frames. | |
1996 | */ | |
1997 | if (ep->bEndpointAddress & USB_DIR_IN) { | |
1998 | if (stat & UDC_MISS_IN) | |
1999 | /* done(ep, req, -EPROTO) */; | |
2000 | else | |
2001 | write_fifo(ep, req); | |
2002 | } else { | |
2003 | int status = 0; | |
2004 | ||
2005 | if (stat & UDC_NO_RXPACKET) | |
2006 | status = -EREMOTEIO; | |
2007 | else if (stat & UDC_ISO_ERR) | |
2008 | status = -EILSEQ; | |
2009 | else if (stat & UDC_DATA_FLUSH) | |
2010 | status = -ENOSR; | |
2011 | ||
2012 | if (status) | |
2013 | /* done(ep, req, status) */; | |
2014 | else | |
2015 | read_fifo(ep, req); | |
2016 | } | |
2017 | deselect_ep(); | |
2018 | /* 6 wait states before next EP */ | |
2019 | ||
2020 | ep->irqs++; | |
2021 | if (!list_empty(&ep->queue)) | |
2022 | pending = 1; | |
2023 | } | |
2024 | if (!pending) | |
2025 | UDC_IRQ_EN_REG &= ~UDC_SOF_IE; | |
2026 | UDC_IRQ_SRC_REG = UDC_SOF; | |
2027 | ||
2028 | spin_unlock_irqrestore(&udc->lock, flags); | |
2029 | return IRQ_HANDLED; | |
2030 | } | |
2031 | #endif | |
2032 | ||
2033 | /*-------------------------------------------------------------------------*/ | |
2034 | ||
2035 | static struct omap_udc *udc; | |
2036 | ||
2037 | int usb_gadget_register_driver (struct usb_gadget_driver *driver) | |
2038 | { | |
2039 | int status = -ENODEV; | |
2040 | struct omap_ep *ep; | |
2041 | unsigned long flags; | |
2042 | ||
2043 | /* basic sanity tests */ | |
2044 | if (!udc) | |
2045 | return -ENODEV; | |
2046 | if (!driver | |
2047 | // FIXME if otg, check: driver->is_otg | |
2048 | || driver->speed < USB_SPEED_FULL | |
2049 | || !driver->bind | |
2050 | || !driver->unbind | |
2051 | || !driver->setup) | |
2052 | return -EINVAL; | |
2053 | ||
2054 | spin_lock_irqsave(&udc->lock, flags); | |
2055 | if (udc->driver) { | |
2056 | spin_unlock_irqrestore(&udc->lock, flags); | |
2057 | return -EBUSY; | |
2058 | } | |
2059 | ||
2060 | /* reset state */ | |
2061 | list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { | |
2062 | ep->irqs = 0; | |
2063 | if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) | |
2064 | continue; | |
2065 | use_ep(ep, 0); | |
2066 | UDC_CTRL_REG = UDC_SET_HALT; | |
2067 | } | |
2068 | udc->ep0_pending = 0; | |
2069 | udc->ep[0].irqs = 0; | |
2070 | udc->softconnect = 1; | |
2071 | ||
2072 | /* hook up the driver */ | |
313980c9 | 2073 | driver->driver.bus = NULL; |
1da177e4 LT |
2074 | udc->driver = driver; |
2075 | udc->gadget.dev.driver = &driver->driver; | |
2076 | spin_unlock_irqrestore(&udc->lock, flags); | |
2077 | ||
2078 | status = driver->bind (&udc->gadget); | |
2079 | if (status) { | |
2080 | DBG("bind to %s --> %d\n", driver->driver.name, status); | |
313980c9 DB |
2081 | udc->gadget.dev.driver = NULL; |
2082 | udc->driver = NULL; | |
1da177e4 LT |
2083 | goto done; |
2084 | } | |
2085 | DBG("bound to driver %s\n", driver->driver.name); | |
2086 | ||
2087 | UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK; | |
2088 | ||
2089 | /* connect to bus through transceiver */ | |
2090 | if (udc->transceiver) { | |
2091 | status = otg_set_peripheral(udc->transceiver, &udc->gadget); | |
2092 | if (status < 0) { | |
2093 | ERR("can't bind to transceiver\n"); | |
2094 | driver->unbind (&udc->gadget); | |
313980c9 DB |
2095 | udc->gadget.dev.driver = NULL; |
2096 | udc->driver = NULL; | |
1da177e4 LT |
2097 | goto done; |
2098 | } | |
2099 | } else { | |
2100 | if (can_pullup(udc)) | |
2101 | pullup_enable (udc); | |
2102 | else | |
2103 | pullup_disable (udc); | |
2104 | } | |
2105 | ||
2106 | /* boards that don't have VBUS sensing can't autogate 48MHz; | |
2107 | * can't enter deep sleep while a gadget driver is active. | |
2108 | */ | |
2109 | if (machine_is_omap_innovator() || machine_is_omap_osk()) | |
2110 | omap_vbus_session(&udc->gadget, 1); | |
2111 | ||
2112 | done: | |
2113 | return status; | |
2114 | } | |
2115 | EXPORT_SYMBOL(usb_gadget_register_driver); | |
2116 | ||
2117 | int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) | |
2118 | { | |
2119 | unsigned long flags; | |
2120 | int status = -ENODEV; | |
2121 | ||
2122 | if (!udc) | |
2123 | return -ENODEV; | |
2124 | if (!driver || driver != udc->driver) | |
2125 | return -EINVAL; | |
2126 | ||
2127 | if (machine_is_omap_innovator() || machine_is_omap_osk()) | |
2128 | omap_vbus_session(&udc->gadget, 0); | |
2129 | ||
2130 | if (udc->transceiver) | |
313980c9 | 2131 | (void) otg_set_peripheral(udc->transceiver, NULL); |
1da177e4 LT |
2132 | else |
2133 | pullup_disable(udc); | |
2134 | ||
2135 | spin_lock_irqsave(&udc->lock, flags); | |
2136 | udc_quiesce(udc); | |
2137 | spin_unlock_irqrestore(&udc->lock, flags); | |
2138 | ||
2139 | driver->unbind(&udc->gadget); | |
313980c9 DB |
2140 | udc->gadget.dev.driver = NULL; |
2141 | udc->driver = NULL; | |
1da177e4 LT |
2142 | |
2143 | DBG("unregistered driver '%s'\n", driver->driver.name); | |
2144 | return status; | |
2145 | } | |
2146 | EXPORT_SYMBOL(usb_gadget_unregister_driver); | |
2147 | ||
2148 | ||
2149 | /*-------------------------------------------------------------------------*/ | |
2150 | ||
2151 | #ifdef CONFIG_USB_GADGET_DEBUG_FILES | |
2152 | ||
2153 | #include <linux/seq_file.h> | |
2154 | ||
2155 | static const char proc_filename[] = "driver/udc"; | |
2156 | ||
2157 | #define FOURBITS "%s%s%s%s" | |
2158 | #define EIGHTBITS FOURBITS FOURBITS | |
2159 | ||
2160 | static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) | |
2161 | { | |
2162 | u16 stat_flg; | |
2163 | struct omap_req *req; | |
2164 | char buf[20]; | |
2165 | ||
2166 | use_ep(ep, 0); | |
2167 | ||
2168 | if (use_dma && ep->has_dma) | |
2169 | snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ", | |
2170 | (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', | |
2171 | ep->dma_channel - 1, ep->lch); | |
2172 | else | |
2173 | buf[0] = 0; | |
2174 | ||
2175 | stat_flg = UDC_STAT_FLG_REG; | |
2176 | seq_printf(s, | |
2177 | "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n", | |
2178 | ep->name, buf, | |
2179 | ep->double_buf ? "dbuf " : "", | |
2180 | ({char *s; switch(ep->ackwait){ | |
2181 | case 0: s = ""; break; | |
2182 | case 1: s = "(ackw) "; break; | |
2183 | case 2: s = "(ackw2) "; break; | |
2184 | default: s = "(?) "; break; | |
2185 | } s;}), | |
2186 | ep->irqs, stat_flg, | |
2187 | (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "", | |
2188 | (stat_flg & UDC_MISS_IN) ? "miss_in " : "", | |
2189 | (stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "", | |
2190 | (stat_flg & UDC_ISO_ERR) ? "iso_err " : "", | |
2191 | (stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "", | |
2192 | (stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "", | |
2193 | (stat_flg & UDC_EP_HALTED) ? "HALT " : "", | |
2194 | (stat_flg & UDC_STALL) ? "STALL " : "", | |
2195 | (stat_flg & UDC_NAK) ? "NAK " : "", | |
2196 | (stat_flg & UDC_ACK) ? "ACK " : "", | |
2197 | (stat_flg & UDC_FIFO_EN) ? "fifo_en " : "", | |
2198 | (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "", | |
2199 | (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : ""); | |
2200 | ||
2201 | if (list_empty (&ep->queue)) | |
2202 | seq_printf(s, "\t(queue empty)\n"); | |
2203 | else | |
2204 | list_for_each_entry (req, &ep->queue, queue) { | |
2205 | unsigned length = req->req.actual; | |
2206 | ||
2207 | if (use_dma && buf[0]) { | |
2208 | length += ((ep->bEndpointAddress & USB_DIR_IN) | |
2209 | ? dma_src_len : dma_dest_len) | |
2210 | (ep, req->req.dma + length); | |
2211 | buf[0] = 0; | |
2212 | } | |
2213 | seq_printf(s, "\treq %p len %d/%d buf %p\n", | |
2214 | &req->req, length, | |
2215 | req->req.length, req->req.buf); | |
2216 | } | |
2217 | } | |
2218 | ||
2219 | static char *trx_mode(unsigned m, int enabled) | |
2220 | { | |
2221 | switch (m) { | |
2222 | case 0: return enabled ? "*6wire" : "unused"; | |
2223 | case 1: return "4wire"; | |
2224 | case 2: return "3wire"; | |
2225 | case 3: return "6wire"; | |
2226 | default: return "unknown"; | |
2227 | } | |
2228 | } | |
2229 | ||
2230 | static int proc_otg_show(struct seq_file *s) | |
2231 | { | |
2232 | u32 tmp; | |
2233 | u32 trans; | |
2234 | ||
2235 | tmp = OTG_REV_REG; | |
2236 | trans = USB_TRANSCEIVER_CTRL_REG; | |
65111084 | 2237 | seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n", |
1da177e4 LT |
2238 | tmp >> 4, tmp & 0xf, trans); |
2239 | tmp = OTG_SYSCON_1_REG; | |
2240 | seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s," | |
2241 | FOURBITS "\n", tmp, | |
2242 | trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R), | |
2243 | trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R), | |
65111084 | 2244 | (USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710()) |
1da177e4 LT |
2245 | ? "internal" |
2246 | : trx_mode(USB0_TRX_MODE(tmp), 1), | |
2247 | (tmp & OTG_IDLE_EN) ? " !otg" : "", | |
2248 | (tmp & HST_IDLE_EN) ? " !host" : "", | |
2249 | (tmp & DEV_IDLE_EN) ? " !dev" : "", | |
2250 | (tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active"); | |
2251 | tmp = OTG_SYSCON_2_REG; | |
2252 | seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS | |
2253 | " b_ase_brst=%d hmc=%d\n", tmp, | |
2254 | (tmp & OTG_EN) ? " otg_en" : "", | |
2255 | (tmp & USBX_SYNCHRO) ? " synchro" : "", | |
2256 | // much more SRP stuff | |
2257 | (tmp & SRP_DATA) ? " srp_data" : "", | |
2258 | (tmp & SRP_VBUS) ? " srp_vbus" : "", | |
2259 | (tmp & OTG_PADEN) ? " otg_paden" : "", | |
2260 | (tmp & HMC_PADEN) ? " hmc_paden" : "", | |
2261 | (tmp & UHOST_EN) ? " uhost_en" : "", | |
2262 | (tmp & HMC_TLLSPEED) ? " tllspeed" : "", | |
2263 | (tmp & HMC_TLLATTACH) ? " tllattach" : "", | |
2264 | B_ASE_BRST(tmp), | |
2265 | OTG_HMC(tmp)); | |
2266 | tmp = OTG_CTRL_REG; | |
2267 | seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp, | |
2268 | (tmp & OTG_ASESSVLD) ? " asess" : "", | |
2269 | (tmp & OTG_BSESSEND) ? " bsess_end" : "", | |
2270 | (tmp & OTG_BSESSVLD) ? " bsess" : "", | |
2271 | (tmp & OTG_VBUSVLD) ? " vbus" : "", | |
2272 | (tmp & OTG_ID) ? " id" : "", | |
2273 | (tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST", | |
2274 | (tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "", | |
2275 | (tmp & OTG_A_BUSREQ) ? " a_bus" : "", | |
2276 | (tmp & OTG_B_HNPEN) ? " b_hnpen" : "", | |
2277 | (tmp & OTG_B_BUSREQ) ? " b_bus" : "", | |
2278 | (tmp & OTG_BUSDROP) ? " busdrop" : "", | |
2279 | (tmp & OTG_PULLDOWN) ? " down" : "", | |
2280 | (tmp & OTG_PULLUP) ? " up" : "", | |
2281 | (tmp & OTG_DRV_VBUS) ? " drv" : "", | |
2282 | (tmp & OTG_PD_VBUS) ? " pd_vb" : "", | |
2283 | (tmp & OTG_PU_VBUS) ? " pu_vb" : "", | |
2284 | (tmp & OTG_PU_ID) ? " pu_id" : "" | |
2285 | ); | |
2286 | tmp = OTG_IRQ_EN_REG; | |
2287 | seq_printf(s, "otg_irq_en %04x" "\n", tmp); | |
2288 | tmp = OTG_IRQ_SRC_REG; | |
2289 | seq_printf(s, "otg_irq_src %04x" "\n", tmp); | |
2290 | tmp = OTG_OUTCTRL_REG; | |
2291 | seq_printf(s, "otg_outctrl %04x" "\n", tmp); | |
2292 | tmp = OTG_TEST_REG; | |
2293 | seq_printf(s, "otg_test %04x" "\n", tmp); | |
313980c9 | 2294 | return 0; |
1da177e4 LT |
2295 | } |
2296 | ||
2297 | static int proc_udc_show(struct seq_file *s, void *_) | |
2298 | { | |
2299 | u32 tmp; | |
2300 | struct omap_ep *ep; | |
2301 | unsigned long flags; | |
2302 | ||
2303 | spin_lock_irqsave(&udc->lock, flags); | |
2304 | ||
2305 | seq_printf(s, "%s, version: " DRIVER_VERSION | |
2306 | #ifdef USE_ISO | |
2307 | " (iso)" | |
2308 | #endif | |
2309 | "%s\n", | |
2310 | driver_desc, | |
2311 | use_dma ? " (dma)" : ""); | |
2312 | ||
2313 | tmp = UDC_REV_REG & 0xff; | |
2314 | seq_printf(s, | |
2315 | "UDC rev %d.%d, fifo mode %d, gadget %s\n" | |
2316 | "hmc %d, transceiver %s\n", | |
2317 | tmp >> 4, tmp & 0xf, | |
2318 | fifo_mode, | |
2319 | udc->driver ? udc->driver->driver.name : "(none)", | |
2320 | HMC, | |
2321 | udc->transceiver ? udc->transceiver->label : "(none)"); | |
2322 | seq_printf(s, "ULPD control %04x req %04x status %04x\n", | |
2323 | __REG16(ULPD_CLOCK_CTRL), | |
2324 | __REG16(ULPD_SOFT_REQ), | |
2325 | __REG16(ULPD_STATUS_REQ)); | |
2326 | ||
2327 | /* OTG controller registers */ | |
2328 | if (!cpu_is_omap15xx()) | |
2329 | proc_otg_show(s); | |
2330 | ||
2331 | tmp = UDC_SYSCON1_REG; | |
2332 | seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp, | |
2333 | (tmp & UDC_CFG_LOCK) ? " cfg_lock" : "", | |
2334 | (tmp & UDC_DATA_ENDIAN) ? " data_endian" : "", | |
2335 | (tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "", | |
2336 | (tmp & UDC_NAK_EN) ? " nak" : "", | |
2337 | (tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "", | |
2338 | (tmp & UDC_SELF_PWR) ? " self_pwr" : "", | |
2339 | (tmp & UDC_SOFF_DIS) ? " soff_dis" : "", | |
2340 | (tmp & UDC_PULLUP_EN) ? " PULLUP" : ""); | |
2341 | // syscon2 is write-only | |
2342 | ||
2343 | /* UDC controller registers */ | |
2344 | if (!(tmp & UDC_PULLUP_EN)) { | |
2345 | seq_printf(s, "(suspended)\n"); | |
2346 | spin_unlock_irqrestore(&udc->lock, flags); | |
2347 | return 0; | |
2348 | } | |
2349 | ||
2350 | tmp = UDC_DEVSTAT_REG; | |
2351 | seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp, | |
2352 | (tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "", | |
2353 | (tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "", | |
2354 | (tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "", | |
2355 | (tmp & UDC_R_WK_OK) ? " r_wk_ok" : "", | |
2356 | (tmp & UDC_USB_RESET) ? " usb_reset" : "", | |
2357 | (tmp & UDC_SUS) ? " SUS" : "", | |
2358 | (tmp & UDC_CFG) ? " CFG" : "", | |
2359 | (tmp & UDC_ADD) ? " ADD" : "", | |
2360 | (tmp & UDC_DEF) ? " DEF" : "", | |
2361 | (tmp & UDC_ATT) ? " ATT" : ""); | |
2362 | seq_printf(s, "sof %04x\n", UDC_SOF_REG); | |
2363 | tmp = UDC_IRQ_EN_REG; | |
2364 | seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp, | |
2365 | (tmp & UDC_SOF_IE) ? " sof" : "", | |
2366 | (tmp & UDC_EPN_RX_IE) ? " epn_rx" : "", | |
2367 | (tmp & UDC_EPN_TX_IE) ? " epn_tx" : "", | |
2368 | (tmp & UDC_DS_CHG_IE) ? " ds_chg" : "", | |
2369 | (tmp & UDC_EP0_IE) ? " ep0" : ""); | |
2370 | tmp = UDC_IRQ_SRC_REG; | |
2371 | seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp, | |
2372 | (tmp & UDC_TXN_DONE) ? " txn_done" : "", | |
2373 | (tmp & UDC_RXN_CNT) ? " rxn_cnt" : "", | |
2374 | (tmp & UDC_RXN_EOT) ? " rxn_eot" : "", | |
2375 | (tmp & UDC_SOF) ? " sof" : "", | |
2376 | (tmp & UDC_EPN_RX) ? " epn_rx" : "", | |
2377 | (tmp & UDC_EPN_TX) ? " epn_tx" : "", | |
2378 | (tmp & UDC_DS_CHG) ? " ds_chg" : "", | |
2379 | (tmp & UDC_SETUP) ? " setup" : "", | |
2380 | (tmp & UDC_EP0_RX) ? " ep0out" : "", | |
2381 | (tmp & UDC_EP0_TX) ? " ep0in" : ""); | |
2382 | if (use_dma) { | |
2383 | unsigned i; | |
2384 | ||
2385 | tmp = UDC_DMA_IRQ_EN_REG; | |
2386 | seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp, | |
2387 | (tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "", | |
2388 | (tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "", | |
2389 | (tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "", | |
2390 | ||
2391 | (tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "", | |
2392 | (tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "", | |
2393 | (tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "", | |
2394 | ||
2395 | (tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "", | |
2396 | (tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "", | |
2397 | (tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : ""); | |
2398 | ||
2399 | tmp = UDC_RXDMA_CFG_REG; | |
2400 | seq_printf(s, "rxdma_cfg %04x\n", tmp); | |
2401 | if (tmp) { | |
2402 | for (i = 0; i < 3; i++) { | |
2403 | if ((tmp & (0x0f << (i * 4))) == 0) | |
2404 | continue; | |
2405 | seq_printf(s, "rxdma[%d] %04x\n", i, | |
2406 | UDC_RXDMA_REG(i + 1)); | |
2407 | } | |
2408 | } | |
2409 | tmp = UDC_TXDMA_CFG_REG; | |
2410 | seq_printf(s, "txdma_cfg %04x\n", tmp); | |
2411 | if (tmp) { | |
2412 | for (i = 0; i < 3; i++) { | |
2413 | if (!(tmp & (0x0f << (i * 4)))) | |
2414 | continue; | |
2415 | seq_printf(s, "txdma[%d] %04x\n", i, | |
2416 | UDC_TXDMA_REG(i + 1)); | |
2417 | } | |
2418 | } | |
2419 | } | |
2420 | ||
2421 | tmp = UDC_DEVSTAT_REG; | |
2422 | if (tmp & UDC_ATT) { | |
2423 | proc_ep_show(s, &udc->ep[0]); | |
2424 | if (tmp & UDC_ADD) { | |
2425 | list_for_each_entry (ep, &udc->gadget.ep_list, | |
2426 | ep.ep_list) { | |
2427 | if (ep->desc) | |
2428 | proc_ep_show(s, ep); | |
2429 | } | |
2430 | } | |
2431 | } | |
2432 | spin_unlock_irqrestore(&udc->lock, flags); | |
2433 | return 0; | |
2434 | } | |
2435 | ||
2436 | static int proc_udc_open(struct inode *inode, struct file *file) | |
2437 | { | |
313980c9 | 2438 | return single_open(file, proc_udc_show, NULL); |
1da177e4 LT |
2439 | } |
2440 | ||
2441 | static struct file_operations proc_ops = { | |
2442 | .open = proc_udc_open, | |
2443 | .read = seq_read, | |
2444 | .llseek = seq_lseek, | |
2445 | .release = single_release, | |
2446 | }; | |
2447 | ||
2448 | static void create_proc_file(void) | |
2449 | { | |
2450 | struct proc_dir_entry *pde; | |
2451 | ||
2452 | pde = create_proc_entry (proc_filename, 0, NULL); | |
2453 | if (pde) | |
2454 | pde->proc_fops = &proc_ops; | |
2455 | } | |
2456 | ||
2457 | static void remove_proc_file(void) | |
2458 | { | |
313980c9 | 2459 | remove_proc_entry(proc_filename, NULL); |
1da177e4 LT |
2460 | } |
2461 | ||
2462 | #else | |
2463 | ||
2464 | static inline void create_proc_file(void) {} | |
2465 | static inline void remove_proc_file(void) {} | |
2466 | ||
2467 | #endif | |
2468 | ||
2469 | /*-------------------------------------------------------------------------*/ | |
2470 | ||
2471 | /* Before this controller can enumerate, we need to pick an endpoint | |
2472 | * configuration, or "fifo_mode" That involves allocating 2KB of packet | |
2473 | * buffer space among the endpoints we'll be operating. | |
65111084 DB |
2474 | * |
2475 | * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when | |
2476 | * UDC_SYSCON_1_REG.CFG_LOCK is set can now work. We won't use that | |
2477 | * capability yet though. | |
1da177e4 LT |
2478 | */ |
2479 | static unsigned __init | |
2480 | omap_ep_setup(char *name, u8 addr, u8 type, | |
2481 | unsigned buf, unsigned maxp, int dbuf) | |
2482 | { | |
2483 | struct omap_ep *ep; | |
2484 | u16 epn_rxtx = 0; | |
2485 | ||
2486 | /* OUT endpoints first, then IN */ | |
2487 | ep = &udc->ep[addr & 0xf]; | |
2488 | if (addr & USB_DIR_IN) | |
2489 | ep += 16; | |
2490 | ||
2491 | /* in case of ep init table bugs */ | |
2492 | BUG_ON(ep->name[0]); | |
2493 | ||
2494 | /* chip setup ... bit values are same for IN, OUT */ | |
2495 | if (type == USB_ENDPOINT_XFER_ISOC) { | |
2496 | switch (maxp) { | |
2497 | case 8: epn_rxtx = 0 << 12; break; | |
2498 | case 16: epn_rxtx = 1 << 12; break; | |
2499 | case 32: epn_rxtx = 2 << 12; break; | |
2500 | case 64: epn_rxtx = 3 << 12; break; | |
2501 | case 128: epn_rxtx = 4 << 12; break; | |
2502 | case 256: epn_rxtx = 5 << 12; break; | |
2503 | case 512: epn_rxtx = 6 << 12; break; | |
2504 | default: BUG(); | |
2505 | } | |
2506 | epn_rxtx |= UDC_EPN_RX_ISO; | |
2507 | dbuf = 1; | |
2508 | } else { | |
2509 | /* double-buffering "not supported" on 15xx, | |
2510 | * and ignored for PIO-IN on 16xx | |
2511 | */ | |
2512 | if (!use_dma || cpu_is_omap15xx()) | |
2513 | dbuf = 0; | |
2514 | ||
2515 | switch (maxp) { | |
2516 | case 8: epn_rxtx = 0 << 12; break; | |
2517 | case 16: epn_rxtx = 1 << 12; break; | |
2518 | case 32: epn_rxtx = 2 << 12; break; | |
2519 | case 64: epn_rxtx = 3 << 12; break; | |
2520 | default: BUG(); | |
2521 | } | |
2522 | if (dbuf && addr) | |
2523 | epn_rxtx |= UDC_EPN_RX_DB; | |
2524 | init_timer(&ep->timer); | |
2525 | ep->timer.function = pio_out_timer; | |
2526 | ep->timer.data = (unsigned long) ep; | |
2527 | } | |
2528 | if (addr) | |
2529 | epn_rxtx |= UDC_EPN_RX_VALID; | |
2530 | BUG_ON(buf & 0x07); | |
2531 | epn_rxtx |= buf >> 3; | |
2532 | ||
2533 | DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n", | |
2534 | name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf); | |
2535 | ||
2536 | if (addr & USB_DIR_IN) | |
2537 | UDC_EP_TX_REG(addr & 0xf) = epn_rxtx; | |
2538 | else | |
2539 | UDC_EP_RX_REG(addr) = epn_rxtx; | |
2540 | ||
2541 | /* next endpoint's buffer starts after this one's */ | |
2542 | buf += maxp; | |
2543 | if (dbuf) | |
2544 | buf += maxp; | |
2545 | BUG_ON(buf > 2048); | |
2546 | ||
2547 | /* set up driver data structures */ | |
2548 | BUG_ON(strlen(name) >= sizeof ep->name); | |
2549 | strlcpy(ep->name, name, sizeof ep->name); | |
2550 | INIT_LIST_HEAD(&ep->queue); | |
2551 | INIT_LIST_HEAD(&ep->iso); | |
2552 | ep->bEndpointAddress = addr; | |
2553 | ep->bmAttributes = type; | |
2554 | ep->double_buf = dbuf; | |
2555 | ep->udc = udc; | |
2556 | ||
2557 | ep->ep.name = ep->name; | |
2558 | ep->ep.ops = &omap_ep_ops; | |
2559 | ep->ep.maxpacket = ep->maxpacket = maxp; | |
2560 | list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list); | |
2561 | ||
2562 | return buf; | |
2563 | } | |
2564 | ||
2565 | static void omap_udc_release(struct device *dev) | |
2566 | { | |
2567 | complete(udc->done); | |
2568 | kfree (udc); | |
313980c9 | 2569 | udc = NULL; |
1da177e4 LT |
2570 | } |
2571 | ||
2572 | static int __init | |
2573 | omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv) | |
2574 | { | |
2575 | unsigned tmp, buf; | |
2576 | ||
2577 | /* abolish any previous hardware state */ | |
2578 | UDC_SYSCON1_REG = 0; | |
2579 | UDC_IRQ_EN_REG = 0; | |
2580 | UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK; | |
2581 | UDC_DMA_IRQ_EN_REG = 0; | |
2582 | UDC_RXDMA_CFG_REG = 0; | |
2583 | UDC_TXDMA_CFG_REG = 0; | |
2584 | ||
2585 | /* UDC_PULLUP_EN gates the chip clock */ | |
2586 | // OTG_SYSCON_1_REG |= DEV_IDLE_EN; | |
2587 | ||
7039f422 | 2588 | udc = kzalloc(sizeof(*udc), SLAB_KERNEL); |
1da177e4 LT |
2589 | if (!udc) |
2590 | return -ENOMEM; | |
2591 | ||
1da177e4 LT |
2592 | spin_lock_init (&udc->lock); |
2593 | ||
2594 | udc->gadget.ops = &omap_gadget_ops; | |
2595 | udc->gadget.ep0 = &udc->ep[0].ep; | |
2596 | INIT_LIST_HEAD(&udc->gadget.ep_list); | |
2597 | INIT_LIST_HEAD(&udc->iso); | |
2598 | udc->gadget.speed = USB_SPEED_UNKNOWN; | |
2599 | udc->gadget.name = driver_name; | |
2600 | ||
2601 | device_initialize(&udc->gadget.dev); | |
2602 | strcpy (udc->gadget.dev.bus_id, "gadget"); | |
2603 | udc->gadget.dev.release = omap_udc_release; | |
2604 | udc->gadget.dev.parent = &odev->dev; | |
2605 | if (use_dma) | |
2606 | udc->gadget.dev.dma_mask = odev->dev.dma_mask; | |
2607 | ||
2608 | udc->transceiver = xceiv; | |
2609 | ||
2610 | /* ep0 is special; put it right after the SETUP buffer */ | |
2611 | buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL, | |
2612 | 8 /* after SETUP */, 64 /* maxpacket */, 0); | |
2613 | list_del_init(&udc->ep[0].ep.ep_list); | |
2614 | ||
2615 | /* initially disable all non-ep0 endpoints */ | |
2616 | for (tmp = 1; tmp < 15; tmp++) { | |
2617 | UDC_EP_RX_REG(tmp) = 0; | |
2618 | UDC_EP_TX_REG(tmp) = 0; | |
2619 | } | |
2620 | ||
2621 | #define OMAP_BULK_EP(name,addr) \ | |
2622 | buf = omap_ep_setup(name "-bulk", addr, \ | |
2623 | USB_ENDPOINT_XFER_BULK, buf, 64, 1); | |
2624 | #define OMAP_INT_EP(name,addr, maxp) \ | |
2625 | buf = omap_ep_setup(name "-int", addr, \ | |
2626 | USB_ENDPOINT_XFER_INT, buf, maxp, 0); | |
2627 | #define OMAP_ISO_EP(name,addr, maxp) \ | |
2628 | buf = omap_ep_setup(name "-iso", addr, \ | |
2629 | USB_ENDPOINT_XFER_ISOC, buf, maxp, 1); | |
2630 | ||
2631 | switch (fifo_mode) { | |
2632 | case 0: | |
2633 | OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); | |
2634 | OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); | |
2635 | OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); | |
2636 | break; | |
2637 | case 1: | |
2638 | OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); | |
2639 | OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); | |
313980c9 DB |
2640 | OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); |
2641 | ||
1da177e4 LT |
2642 | OMAP_BULK_EP("ep3in", USB_DIR_IN | 3); |
2643 | OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4); | |
313980c9 | 2644 | OMAP_INT_EP("ep10in", USB_DIR_IN | 10, 16); |
1da177e4 LT |
2645 | |
2646 | OMAP_BULK_EP("ep5in", USB_DIR_IN | 5); | |
2647 | OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); | |
313980c9 DB |
2648 | OMAP_INT_EP("ep11in", USB_DIR_IN | 11, 16); |
2649 | ||
1da177e4 LT |
2650 | OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); |
2651 | OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6); | |
313980c9 | 2652 | OMAP_INT_EP("ep12in", USB_DIR_IN | 12, 16); |
1da177e4 LT |
2653 | |
2654 | OMAP_BULK_EP("ep7in", USB_DIR_IN | 7); | |
2655 | OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); | |
313980c9 DB |
2656 | OMAP_INT_EP("ep13in", USB_DIR_IN | 13, 16); |
2657 | OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16); | |
2658 | ||
1da177e4 LT |
2659 | OMAP_BULK_EP("ep8in", USB_DIR_IN | 8); |
2660 | OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8); | |
313980c9 DB |
2661 | OMAP_INT_EP("ep14in", USB_DIR_IN | 14, 16); |
2662 | OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16); | |
2663 | ||
2664 | OMAP_BULK_EP("ep15in", USB_DIR_IN | 15); | |
2665 | OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15); | |
1da177e4 | 2666 | |
1da177e4 LT |
2667 | break; |
2668 | ||
2669 | #ifdef USE_ISO | |
2670 | case 2: /* mixed iso/bulk */ | |
2671 | OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256); | |
2672 | OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256); | |
2673 | OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128); | |
2674 | OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128); | |
2675 | ||
2676 | OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16); | |
2677 | ||
2678 | OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); | |
2679 | OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); | |
2680 | OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16); | |
2681 | break; | |
2682 | case 3: /* mixed bulk/iso */ | |
2683 | OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); | |
2684 | OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); | |
2685 | OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); | |
2686 | ||
2687 | OMAP_BULK_EP("ep4in", USB_DIR_IN | 4); | |
2688 | OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); | |
2689 | OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16); | |
2690 | ||
2691 | OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256); | |
2692 | OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256); | |
2693 | OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); | |
2694 | break; | |
2695 | #endif | |
2696 | ||
2697 | /* add more modes as needed */ | |
2698 | ||
2699 | default: | |
2700 | ERR("unsupported fifo_mode #%d\n", fifo_mode); | |
2701 | return -ENODEV; | |
2702 | } | |
2703 | UDC_SYSCON1_REG = UDC_CFG_LOCK|UDC_SELF_PWR; | |
2704 | INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf); | |
2705 | return 0; | |
2706 | } | |
2707 | ||
3ae5eaec | 2708 | static int __init omap_udc_probe(struct platform_device *pdev) |
1da177e4 | 2709 | { |
1da177e4 LT |
2710 | int status = -ENODEV; |
2711 | int hmc; | |
313980c9 DB |
2712 | struct otg_transceiver *xceiv = NULL; |
2713 | const char *type = NULL; | |
3ae5eaec | 2714 | struct omap_usb_config *config = pdev->dev.platform_data; |
1da177e4 LT |
2715 | |
2716 | /* NOTE: "knows" the order of the resources! */ | |
3ae5eaec RK |
2717 | if (!request_mem_region(pdev->resource[0].start, |
2718 | pdev->resource[0].end - pdev->resource[0].start + 1, | |
1da177e4 LT |
2719 | driver_name)) { |
2720 | DBG("request_mem_region failed\n"); | |
2721 | return -EBUSY; | |
2722 | } | |
2723 | ||
2724 | INFO("OMAP UDC rev %d.%d%s\n", | |
2725 | UDC_REV_REG >> 4, UDC_REV_REG & 0xf, | |
2726 | config->otg ? ", Mini-AB" : ""); | |
2727 | ||
2728 | /* use the mode given to us by board init code */ | |
2729 | if (cpu_is_omap15xx()) { | |
2730 | hmc = HMC_1510; | |
2731 | type = "(unknown)"; | |
2732 | ||
2733 | if (machine_is_omap_innovator()) { | |
2734 | /* just set up software VBUS detect, and then | |
2735 | * later rig it so we always report VBUS. | |
2736 | * FIXME without really sensing VBUS, we can't | |
2737 | * know when to turn PULLUP_EN on/off; and that | |
2738 | * means we always "need" the 48MHz clock. | |
2739 | */ | |
2740 | u32 tmp = FUNC_MUX_CTRL_0_REG; | |
2741 | ||
2742 | FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510; | |
2743 | tmp |= VBUS_MODE_1510; | |
2744 | tmp &= ~VBUS_CTRL_1510; | |
2745 | FUNC_MUX_CTRL_0_REG = tmp; | |
2746 | } | |
2747 | } else { | |
65111084 DB |
2748 | /* The transceiver may package some GPIO logic or handle |
2749 | * loopback and/or transceiverless setup; if we find one, | |
2750 | * use it. Except for OTG, we don't _need_ to talk to one; | |
2751 | * but not having one probably means no VBUS detection. | |
2752 | */ | |
2753 | xceiv = otg_get_transceiver(); | |
2754 | if (xceiv) | |
2755 | type = xceiv->label; | |
2756 | else if (config->otg) { | |
2757 | DBG("OTG requires external transceiver!\n"); | |
2758 | goto cleanup0; | |
2759 | } | |
2760 | ||
1da177e4 LT |
2761 | hmc = HMC_1610; |
2762 | switch (hmc) { | |
313980c9 DB |
2763 | case 0: /* POWERUP DEFAULT == 0 */ |
2764 | case 4: | |
2765 | case 12: | |
2766 | case 20: | |
2767 | if (!cpu_is_omap1710()) { | |
2768 | type = "integrated"; | |
2769 | break; | |
2770 | } | |
2771 | /* FALL THROUGH */ | |
1da177e4 LT |
2772 | case 3: |
2773 | case 11: | |
2774 | case 16: | |
2775 | case 19: | |
2776 | case 25: | |
1da177e4 LT |
2777 | if (!xceiv) { |
2778 | DBG("external transceiver not registered!\n"); | |
313980c9 | 2779 | type = "unknown"; |
65111084 | 2780 | } |
1da177e4 | 2781 | break; |
1da177e4 | 2782 | case 21: /* internal loopback */ |
313980c9 | 2783 | type = "loopback"; |
1da177e4 LT |
2784 | break; |
2785 | case 14: /* transceiverless */ | |
65111084 DB |
2786 | if (cpu_is_omap1710()) |
2787 | goto bad_on_1710; | |
2788 | /* FALL THROUGH */ | |
2789 | case 13: | |
2790 | case 15: | |
313980c9 | 2791 | type = "no"; |
1da177e4 LT |
2792 | break; |
2793 | ||
2794 | default: | |
65111084 | 2795 | bad_on_1710: |
1da177e4 | 2796 | ERR("unrecognized UDC HMC mode %d\n", hmc); |
65111084 | 2797 | goto cleanup0; |
1da177e4 LT |
2798 | } |
2799 | } | |
313980c9 | 2800 | INFO("hmc mode %d, %s transceiver\n", hmc, type); |
1da177e4 LT |
2801 | |
2802 | /* a "gadget" abstracts/virtualizes the controller */ | |
3ae5eaec | 2803 | status = omap_udc_setup(pdev, xceiv); |
1da177e4 LT |
2804 | if (status) { |
2805 | goto cleanup0; | |
2806 | } | |
313980c9 | 2807 | xceiv = NULL; |
1da177e4 LT |
2808 | // "udc" is now valid |
2809 | pullup_disable(udc); | |
2810 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) | |
2811 | udc->gadget.is_otg = (config->otg != 0); | |
2812 | #endif | |
2813 | ||
65111084 DB |
2814 | /* starting with omap1710 es2.0, clear toggle is a separate bit */ |
2815 | if (UDC_REV_REG >= 0x61) | |
2816 | udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE; | |
2817 | else | |
2818 | udc->clr_halt = UDC_RESET_EP; | |
2819 | ||
1da177e4 | 2820 | /* USB general purpose IRQ: ep0, state changes, dma, etc */ |
3ae5eaec | 2821 | status = request_irq(pdev->resource[1].start, omap_udc_irq, |
1da177e4 LT |
2822 | SA_SAMPLE_RANDOM, driver_name, udc); |
2823 | if (status != 0) { | |
2824 | ERR( "can't get irq %ld, err %d\n", | |
3ae5eaec | 2825 | pdev->resource[1].start, status); |
1da177e4 LT |
2826 | goto cleanup1; |
2827 | } | |
2828 | ||
2829 | /* USB "non-iso" IRQ (PIO for all but ep0) */ | |
3ae5eaec | 2830 | status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, |
1da177e4 LT |
2831 | SA_SAMPLE_RANDOM, "omap_udc pio", udc); |
2832 | if (status != 0) { | |
2833 | ERR( "can't get irq %ld, err %d\n", | |
3ae5eaec | 2834 | pdev->resource[2].start, status); |
1da177e4 LT |
2835 | goto cleanup2; |
2836 | } | |
2837 | #ifdef USE_ISO | |
3ae5eaec | 2838 | status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, |
1da177e4 LT |
2839 | SA_INTERRUPT, "omap_udc iso", udc); |
2840 | if (status != 0) { | |
2841 | ERR("can't get irq %ld, err %d\n", | |
3ae5eaec | 2842 | pdev->resource[3].start, status); |
1da177e4 LT |
2843 | goto cleanup3; |
2844 | } | |
2845 | #endif | |
2846 | ||
2847 | create_proc_file(); | |
2848 | device_add(&udc->gadget.dev); | |
2849 | return 0; | |
2850 | ||
2851 | #ifdef USE_ISO | |
2852 | cleanup3: | |
3ae5eaec | 2853 | free_irq(pdev->resource[2].start, udc); |
1da177e4 LT |
2854 | #endif |
2855 | ||
2856 | cleanup2: | |
3ae5eaec | 2857 | free_irq(pdev->resource[1].start, udc); |
1da177e4 LT |
2858 | |
2859 | cleanup1: | |
2860 | kfree (udc); | |
313980c9 | 2861 | udc = NULL; |
1da177e4 LT |
2862 | |
2863 | cleanup0: | |
2864 | if (xceiv) | |
2865 | put_device(xceiv->dev); | |
3ae5eaec RK |
2866 | release_mem_region(pdev->resource[0].start, |
2867 | pdev->resource[0].end - pdev->resource[0].start + 1); | |
1da177e4 LT |
2868 | return status; |
2869 | } | |
2870 | ||
3ae5eaec | 2871 | static int __exit omap_udc_remove(struct platform_device *pdev) |
1da177e4 | 2872 | { |
1da177e4 LT |
2873 | DECLARE_COMPLETION(done); |
2874 | ||
2875 | if (!udc) | |
2876 | return -ENODEV; | |
2877 | ||
2878 | udc->done = &done; | |
2879 | ||
2880 | pullup_disable(udc); | |
2881 | if (udc->transceiver) { | |
2882 | put_device(udc->transceiver->dev); | |
313980c9 | 2883 | udc->transceiver = NULL; |
1da177e4 LT |
2884 | } |
2885 | UDC_SYSCON1_REG = 0; | |
2886 | ||
2887 | remove_proc_file(); | |
2888 | ||
2889 | #ifdef USE_ISO | |
3ae5eaec | 2890 | free_irq(pdev->resource[3].start, udc); |
1da177e4 | 2891 | #endif |
3ae5eaec RK |
2892 | free_irq(pdev->resource[2].start, udc); |
2893 | free_irq(pdev->resource[1].start, udc); | |
1da177e4 | 2894 | |
3ae5eaec RK |
2895 | release_mem_region(pdev->resource[0].start, |
2896 | pdev->resource[0].end - pdev->resource[0].start + 1); | |
1da177e4 LT |
2897 | |
2898 | device_unregister(&udc->gadget.dev); | |
2899 | wait_for_completion(&done); | |
2900 | ||
2901 | return 0; | |
2902 | } | |
2903 | ||
313980c9 DB |
2904 | /* suspend/resume/wakeup from sysfs (echo > power/state) or when the |
2905 | * system is forced into deep sleep | |
2906 | * | |
2907 | * REVISIT we should probably reject suspend requests when there's a host | |
2908 | * session active, rather than disconnecting, at least on boards that can | |
2909 | * report VBUS irqs (UDC_DEVSTAT_REG.UDC_ATT). And in any case, we need to | |
2910 | * make host resumes and VBUS detection trigger OMAP wakeup events; that | |
2911 | * may involve talking to an external transceiver (e.g. isp1301). | |
2912 | */ | |
1d7beee3 | 2913 | |
3ae5eaec | 2914 | static int omap_udc_suspend(struct platform_device *dev, pm_message_t message) |
1da177e4 | 2915 | { |
313980c9 DB |
2916 | u32 devstat; |
2917 | ||
313980c9 DB |
2918 | devstat = UDC_DEVSTAT_REG; |
2919 | ||
2920 | /* we're requesting 48 MHz clock if the pullup is enabled | |
2921 | * (== we're attached to the host) and we're not suspended, | |
2922 | * which would prevent entry to deep sleep... | |
2923 | */ | |
2924 | if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) { | |
2925 | WARN("session active; suspend requires disconnect\n"); | |
2926 | omap_pullup(&udc->gadget, 0); | |
2927 | } | |
1da177e4 | 2928 | |
ba9d35fb PM |
2929 | udc->gadget.dev.power.power_state = PMSG_SUSPEND; |
2930 | udc->gadget.dev.parent->power.power_state = PMSG_SUSPEND; | |
1da177e4 LT |
2931 | return 0; |
2932 | } | |
2933 | ||
3ae5eaec | 2934 | static int omap_udc_resume(struct platform_device *dev) |
1da177e4 | 2935 | { |
1da177e4 | 2936 | DBG("resume + wakeup/SRP\n"); |
1da177e4 LT |
2937 | omap_pullup(&udc->gadget, 1); |
2938 | ||
2939 | /* maybe the host would enumerate us if we nudged it */ | |
2940 | msleep(100); | |
2941 | return omap_wakeup(&udc->gadget); | |
2942 | } | |
2943 | ||
2944 | /*-------------------------------------------------------------------------*/ | |
2945 | ||
3ae5eaec | 2946 | static struct platform_driver udc_driver = { |
1da177e4 LT |
2947 | .probe = omap_udc_probe, |
2948 | .remove = __exit_p(omap_udc_remove), | |
2949 | .suspend = omap_udc_suspend, | |
2950 | .resume = omap_udc_resume, | |
3ae5eaec RK |
2951 | .driver = { |
2952 | .owner = THIS_MODULE, | |
2953 | .name = (char *) driver_name, | |
2954 | }, | |
1da177e4 LT |
2955 | }; |
2956 | ||
2957 | static int __init udc_init(void) | |
2958 | { | |
2959 | INFO("%s, version: " DRIVER_VERSION | |
2960 | #ifdef USE_ISO | |
2961 | " (iso)" | |
2962 | #endif | |
2963 | "%s\n", driver_desc, | |
2964 | use_dma ? " (dma)" : ""); | |
3ae5eaec | 2965 | return platform_driver_register(&udc_driver); |
1da177e4 LT |
2966 | } |
2967 | module_init(udc_init); | |
2968 | ||
2969 | static void __exit udc_exit(void) | |
2970 | { | |
3ae5eaec | 2971 | platform_driver_unregister(&udc_driver); |
1da177e4 LT |
2972 | } |
2973 | module_exit(udc_exit); | |
2974 | ||
2975 | MODULE_DESCRIPTION(DRIVER_DESC); | |
2976 | MODULE_LICENSE("GPL"); | |
2977 |