]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * g_serial.c -- USB gadget serial driver | |
3 | * | |
4 | * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com) | |
5 | * | |
6 | * This code is based in part on the Gadget Zero driver, which | |
7 | * is Copyright (C) 2003 by David Brownell, all rights reserved. | |
8 | * | |
9 | * This code also borrows from usbserial.c, which is | |
10 | * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) | |
11 | * Copyright (C) 2000 Peter Berger (pberger@brimson.com) | |
12 | * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) | |
13 | * | |
14 | * This software is distributed under the terms of the GNU General | |
15 | * Public License ("GPL") as published by the Free Software Foundation, | |
16 | * either version 2 of that License or (at your option) any later version. | |
17 | * | |
18 | */ | |
19 | ||
1da177e4 LT |
20 | #include <linux/module.h> |
21 | #include <linux/kernel.h> | |
22 | #include <linux/delay.h> | |
23 | #include <linux/ioport.h> | |
24 | #include <linux/sched.h> | |
25 | #include <linux/slab.h> | |
26 | #include <linux/smp_lock.h> | |
27 | #include <linux/errno.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/timer.h> | |
30 | #include <linux/list.h> | |
31 | #include <linux/interrupt.h> | |
32 | #include <linux/utsname.h> | |
33 | #include <linux/wait.h> | |
34 | #include <linux/proc_fs.h> | |
35 | #include <linux/device.h> | |
36 | #include <linux/tty.h> | |
37 | #include <linux/tty_flip.h> | |
38 | ||
39 | #include <asm/byteorder.h> | |
40 | #include <asm/io.h> | |
41 | #include <asm/irq.h> | |
42 | #include <asm/system.h> | |
43 | #include <asm/unaligned.h> | |
44 | #include <asm/uaccess.h> | |
45 | ||
46 | #include <linux/usb_ch9.h> | |
a8c28f23 | 47 | #include <linux/usb/cdc.h> |
1da177e4 LT |
48 | #include <linux/usb_gadget.h> |
49 | ||
50 | #include "gadget_chips.h" | |
51 | ||
52 | ||
1da177e4 LT |
53 | /* Defines */ |
54 | ||
ca094f11 FBH |
55 | #define GS_VERSION_STR "v2.2" |
56 | #define GS_VERSION_NUM 0x0202 | |
1da177e4 LT |
57 | |
58 | #define GS_LONG_NAME "Gadget Serial" | |
59 | #define GS_SHORT_NAME "g_serial" | |
60 | ||
61 | #define GS_MAJOR 127 | |
62 | #define GS_MINOR_START 0 | |
63 | ||
64 | #define GS_NUM_PORTS 16 | |
65 | ||
66 | #define GS_NUM_CONFIGS 1 | |
67 | #define GS_NO_CONFIG_ID 0 | |
68 | #define GS_BULK_CONFIG_ID 1 | |
69 | #define GS_ACM_CONFIG_ID 2 | |
70 | ||
71 | #define GS_MAX_NUM_INTERFACES 2 | |
72 | #define GS_BULK_INTERFACE_ID 0 | |
73 | #define GS_CONTROL_INTERFACE_ID 0 | |
74 | #define GS_DATA_INTERFACE_ID 1 | |
75 | ||
76 | #define GS_MAX_DESC_LEN 256 | |
77 | ||
78 | #define GS_DEFAULT_READ_Q_SIZE 32 | |
79 | #define GS_DEFAULT_WRITE_Q_SIZE 32 | |
80 | ||
81 | #define GS_DEFAULT_WRITE_BUF_SIZE 8192 | |
82 | #define GS_TMP_BUF_SIZE 8192 | |
83 | ||
84 | #define GS_CLOSE_TIMEOUT 15 | |
85 | ||
86 | #define GS_DEFAULT_USE_ACM 0 | |
87 | ||
88 | #define GS_DEFAULT_DTE_RATE 9600 | |
89 | #define GS_DEFAULT_DATA_BITS 8 | |
90 | #define GS_DEFAULT_PARITY USB_CDC_NO_PARITY | |
91 | #define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS | |
92 | ||
93 | /* select highspeed/fullspeed, hiding highspeed if not configured */ | |
94 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
95 | #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs)) | |
96 | #else | |
97 | #define GS_SPEED_SELECT(is_hs,hs,fs) (fs) | |
98 | #endif /* CONFIG_USB_GADGET_DUALSPEED */ | |
99 | ||
100 | /* debug settings */ | |
101 | #ifdef GS_DEBUG | |
102 | static int debug = 1; | |
103 | ||
104 | #define gs_debug(format, arg...) \ | |
105 | do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0) | |
106 | #define gs_debug_level(level, format, arg...) \ | |
107 | do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0) | |
108 | ||
109 | #else | |
110 | ||
111 | #define gs_debug(format, arg...) \ | |
112 | do { } while(0) | |
113 | #define gs_debug_level(level, format, arg...) \ | |
114 | do { } while(0) | |
115 | ||
116 | #endif /* GS_DEBUG */ | |
117 | ||
118 | /* Thanks to NetChip Technologies for donating this product ID. | |
119 | * | |
120 | * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! | |
121 | * Instead: allocate your own, using normal USB-IF procedures. | |
122 | */ | |
123 | #define GS_VENDOR_ID 0x0525 /* NetChip */ | |
124 | #define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */ | |
125 | #define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */ | |
126 | ||
127 | #define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ | |
128 | #define GS_NOTIFY_MAXPACKET 8 | |
129 | ||
130 | ||
131 | /* Structures */ | |
132 | ||
133 | struct gs_dev; | |
134 | ||
135 | /* circular buffer */ | |
136 | struct gs_buf { | |
137 | unsigned int buf_size; | |
138 | char *buf_buf; | |
139 | char *buf_get; | |
140 | char *buf_put; | |
141 | }; | |
142 | ||
143 | /* list of requests */ | |
144 | struct gs_req_entry { | |
145 | struct list_head re_entry; | |
146 | struct usb_request *re_req; | |
147 | }; | |
148 | ||
149 | /* the port structure holds info for each port, one for each minor number */ | |
150 | struct gs_port { | |
151 | struct gs_dev *port_dev; /* pointer to device struct */ | |
152 | struct tty_struct *port_tty; /* pointer to tty struct */ | |
153 | spinlock_t port_lock; | |
154 | int port_num; | |
155 | int port_open_count; | |
156 | int port_in_use; /* open/close in progress */ | |
157 | wait_queue_head_t port_write_wait;/* waiting to write */ | |
158 | struct gs_buf *port_write_buf; | |
159 | struct usb_cdc_line_coding port_line_coding; | |
160 | }; | |
161 | ||
162 | /* the device structure holds info for the USB device */ | |
163 | struct gs_dev { | |
164 | struct usb_gadget *dev_gadget; /* gadget device pointer */ | |
165 | spinlock_t dev_lock; /* lock for set/reset config */ | |
166 | int dev_config; /* configuration number */ | |
167 | struct usb_ep *dev_notify_ep; /* address of notify endpoint */ | |
168 | struct usb_ep *dev_in_ep; /* address of in endpoint */ | |
169 | struct usb_ep *dev_out_ep; /* address of out endpoint */ | |
093cf723 | 170 | struct usb_endpoint_descriptor /* descriptor of notify ep */ |
1da177e4 LT |
171 | *dev_notify_ep_desc; |
172 | struct usb_endpoint_descriptor /* descriptor of in endpoint */ | |
173 | *dev_in_ep_desc; | |
174 | struct usb_endpoint_descriptor /* descriptor of out endpoint */ | |
175 | *dev_out_ep_desc; | |
176 | struct usb_request *dev_ctrl_req; /* control request */ | |
177 | struct list_head dev_req_list; /* list of write requests */ | |
178 | int dev_sched_port; /* round robin port scheduled */ | |
179 | struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */ | |
180 | }; | |
181 | ||
182 | ||
183 | /* Functions */ | |
184 | ||
185 | /* module */ | |
186 | static int __init gs_module_init(void); | |
187 | static void __exit gs_module_exit(void); | |
188 | ||
189 | /* tty driver */ | |
190 | static int gs_open(struct tty_struct *tty, struct file *file); | |
191 | static void gs_close(struct tty_struct *tty, struct file *file); | |
192 | static int gs_write(struct tty_struct *tty, | |
193 | const unsigned char *buf, int count); | |
194 | static void gs_put_char(struct tty_struct *tty, unsigned char ch); | |
195 | static void gs_flush_chars(struct tty_struct *tty); | |
196 | static int gs_write_room(struct tty_struct *tty); | |
197 | static int gs_chars_in_buffer(struct tty_struct *tty); | |
198 | static void gs_throttle(struct tty_struct * tty); | |
199 | static void gs_unthrottle(struct tty_struct * tty); | |
200 | static void gs_break(struct tty_struct *tty, int break_state); | |
201 | static int gs_ioctl(struct tty_struct *tty, struct file *file, | |
202 | unsigned int cmd, unsigned long arg); | |
606d099c | 203 | static void gs_set_termios(struct tty_struct *tty, struct ktermios *old); |
1da177e4 LT |
204 | |
205 | static int gs_send(struct gs_dev *dev); | |
206 | static int gs_send_packet(struct gs_dev *dev, char *packet, | |
207 | unsigned int size); | |
208 | static int gs_recv_packet(struct gs_dev *dev, char *packet, | |
209 | unsigned int size); | |
210 | static void gs_read_complete(struct usb_ep *ep, struct usb_request *req); | |
211 | static void gs_write_complete(struct usb_ep *ep, struct usb_request *req); | |
212 | ||
213 | /* gadget driver */ | |
214 | static int gs_bind(struct usb_gadget *gadget); | |
215 | static void gs_unbind(struct usb_gadget *gadget); | |
216 | static int gs_setup(struct usb_gadget *gadget, | |
217 | const struct usb_ctrlrequest *ctrl); | |
218 | static int gs_setup_standard(struct usb_gadget *gadget, | |
219 | const struct usb_ctrlrequest *ctrl); | |
220 | static int gs_setup_class(struct usb_gadget *gadget, | |
221 | const struct usb_ctrlrequest *ctrl); | |
222 | static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req); | |
223 | static void gs_disconnect(struct usb_gadget *gadget); | |
224 | static int gs_set_config(struct gs_dev *dev, unsigned config); | |
225 | static void gs_reset_config(struct gs_dev *dev); | |
226 | static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, | |
227 | u8 type, unsigned int index, int is_otg); | |
228 | ||
229 | static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, | |
55016f10 | 230 | gfp_t kmalloc_flags); |
1da177e4 LT |
231 | static void gs_free_req(struct usb_ep *ep, struct usb_request *req); |
232 | ||
233 | static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, | |
55016f10 | 234 | gfp_t kmalloc_flags); |
1da177e4 LT |
235 | static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); |
236 | ||
55016f10 | 237 | static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags); |
1da177e4 LT |
238 | static void gs_free_ports(struct gs_dev *dev); |
239 | ||
240 | /* circular buffer */ | |
55016f10 | 241 | static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags); |
1da177e4 LT |
242 | static void gs_buf_free(struct gs_buf *gb); |
243 | static void gs_buf_clear(struct gs_buf *gb); | |
244 | static unsigned int gs_buf_data_avail(struct gs_buf *gb); | |
245 | static unsigned int gs_buf_space_avail(struct gs_buf *gb); | |
246 | static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, | |
247 | unsigned int count); | |
248 | static unsigned int gs_buf_get(struct gs_buf *gb, char *buf, | |
249 | unsigned int count); | |
250 | ||
251 | /* external functions */ | |
252 | extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode); | |
253 | ||
254 | ||
255 | /* Globals */ | |
256 | ||
257 | static struct gs_dev *gs_device; | |
258 | ||
259 | static const char *EP_IN_NAME; | |
260 | static const char *EP_OUT_NAME; | |
261 | static const char *EP_NOTIFY_NAME; | |
262 | ||
263 | static struct semaphore gs_open_close_sem[GS_NUM_PORTS]; | |
264 | ||
265 | static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE; | |
266 | static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE; | |
267 | ||
268 | static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE; | |
269 | ||
270 | static unsigned int use_acm = GS_DEFAULT_USE_ACM; | |
271 | ||
272 | ||
273 | /* tty driver struct */ | |
b68e31d0 | 274 | static const struct tty_operations gs_tty_ops = { |
1da177e4 LT |
275 | .open = gs_open, |
276 | .close = gs_close, | |
277 | .write = gs_write, | |
278 | .put_char = gs_put_char, | |
279 | .flush_chars = gs_flush_chars, | |
280 | .write_room = gs_write_room, | |
281 | .ioctl = gs_ioctl, | |
282 | .set_termios = gs_set_termios, | |
283 | .throttle = gs_throttle, | |
284 | .unthrottle = gs_unthrottle, | |
285 | .break_ctl = gs_break, | |
286 | .chars_in_buffer = gs_chars_in_buffer, | |
287 | }; | |
288 | static struct tty_driver *gs_tty_driver; | |
289 | ||
290 | /* gadget driver struct */ | |
291 | static struct usb_gadget_driver gs_gadget_driver = { | |
292 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
293 | .speed = USB_SPEED_HIGH, | |
294 | #else | |
295 | .speed = USB_SPEED_FULL, | |
296 | #endif /* CONFIG_USB_GADGET_DUALSPEED */ | |
297 | .function = GS_LONG_NAME, | |
298 | .bind = gs_bind, | |
329af28b | 299 | .unbind = __exit_p(gs_unbind), |
1da177e4 LT |
300 | .setup = gs_setup, |
301 | .disconnect = gs_disconnect, | |
302 | .driver = { | |
303 | .name = GS_SHORT_NAME, | |
1da177e4 LT |
304 | }, |
305 | }; | |
306 | ||
307 | ||
308 | /* USB descriptors */ | |
309 | ||
310 | #define GS_MANUFACTURER_STR_ID 1 | |
311 | #define GS_PRODUCT_STR_ID 2 | |
312 | #define GS_SERIAL_STR_ID 3 | |
313 | #define GS_BULK_CONFIG_STR_ID 4 | |
314 | #define GS_ACM_CONFIG_STR_ID 5 | |
315 | #define GS_CONTROL_STR_ID 6 | |
316 | #define GS_DATA_STR_ID 7 | |
317 | ||
318 | /* static strings, in UTF-8 */ | |
319 | static char manufacturer[50]; | |
320 | static struct usb_string gs_strings[] = { | |
321 | { GS_MANUFACTURER_STR_ID, manufacturer }, | |
322 | { GS_PRODUCT_STR_ID, GS_LONG_NAME }, | |
323 | { GS_SERIAL_STR_ID, "0" }, | |
324 | { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" }, | |
325 | { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" }, | |
326 | { GS_CONTROL_STR_ID, "Gadget Serial Control" }, | |
327 | { GS_DATA_STR_ID, "Gadget Serial Data" }, | |
328 | { } /* end of list */ | |
329 | }; | |
330 | ||
331 | static struct usb_gadget_strings gs_string_table = { | |
332 | .language = 0x0409, /* en-us */ | |
333 | .strings = gs_strings, | |
334 | }; | |
335 | ||
336 | static struct usb_device_descriptor gs_device_desc = { | |
337 | .bLength = USB_DT_DEVICE_SIZE, | |
338 | .bDescriptorType = USB_DT_DEVICE, | |
339 | .bcdUSB = __constant_cpu_to_le16(0x0200), | |
340 | .bDeviceSubClass = 0, | |
341 | .bDeviceProtocol = 0, | |
342 | .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID), | |
343 | .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID), | |
344 | .iManufacturer = GS_MANUFACTURER_STR_ID, | |
345 | .iProduct = GS_PRODUCT_STR_ID, | |
346 | .iSerialNumber = GS_SERIAL_STR_ID, | |
347 | .bNumConfigurations = GS_NUM_CONFIGS, | |
348 | }; | |
349 | ||
350 | static struct usb_otg_descriptor gs_otg_descriptor = { | |
351 | .bLength = sizeof(gs_otg_descriptor), | |
352 | .bDescriptorType = USB_DT_OTG, | |
353 | .bmAttributes = USB_OTG_SRP, | |
354 | }; | |
355 | ||
356 | static struct usb_config_descriptor gs_bulk_config_desc = { | |
357 | .bLength = USB_DT_CONFIG_SIZE, | |
358 | .bDescriptorType = USB_DT_CONFIG, | |
359 | /* .wTotalLength computed dynamically */ | |
360 | .bNumInterfaces = 1, | |
361 | .bConfigurationValue = GS_BULK_CONFIG_ID, | |
362 | .iConfiguration = GS_BULK_CONFIG_STR_ID, | |
363 | .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, | |
364 | .bMaxPower = 1, | |
365 | }; | |
366 | ||
367 | static struct usb_config_descriptor gs_acm_config_desc = { | |
368 | .bLength = USB_DT_CONFIG_SIZE, | |
369 | .bDescriptorType = USB_DT_CONFIG, | |
370 | /* .wTotalLength computed dynamically */ | |
371 | .bNumInterfaces = 2, | |
372 | .bConfigurationValue = GS_ACM_CONFIG_ID, | |
373 | .iConfiguration = GS_ACM_CONFIG_STR_ID, | |
374 | .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, | |
375 | .bMaxPower = 1, | |
376 | }; | |
377 | ||
378 | static const struct usb_interface_descriptor gs_bulk_interface_desc = { | |
379 | .bLength = USB_DT_INTERFACE_SIZE, | |
380 | .bDescriptorType = USB_DT_INTERFACE, | |
381 | .bInterfaceNumber = GS_BULK_INTERFACE_ID, | |
382 | .bNumEndpoints = 2, | |
383 | .bInterfaceClass = USB_CLASS_CDC_DATA, | |
384 | .bInterfaceSubClass = 0, | |
385 | .bInterfaceProtocol = 0, | |
386 | .iInterface = GS_DATA_STR_ID, | |
387 | }; | |
388 | ||
389 | static const struct usb_interface_descriptor gs_control_interface_desc = { | |
390 | .bLength = USB_DT_INTERFACE_SIZE, | |
391 | .bDescriptorType = USB_DT_INTERFACE, | |
392 | .bInterfaceNumber = GS_CONTROL_INTERFACE_ID, | |
393 | .bNumEndpoints = 1, | |
394 | .bInterfaceClass = USB_CLASS_COMM, | |
395 | .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, | |
396 | .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, | |
397 | .iInterface = GS_CONTROL_STR_ID, | |
398 | }; | |
399 | ||
400 | static const struct usb_interface_descriptor gs_data_interface_desc = { | |
401 | .bLength = USB_DT_INTERFACE_SIZE, | |
402 | .bDescriptorType = USB_DT_INTERFACE, | |
403 | .bInterfaceNumber = GS_DATA_INTERFACE_ID, | |
404 | .bNumEndpoints = 2, | |
405 | .bInterfaceClass = USB_CLASS_CDC_DATA, | |
406 | .bInterfaceSubClass = 0, | |
407 | .bInterfaceProtocol = 0, | |
408 | .iInterface = GS_DATA_STR_ID, | |
409 | }; | |
410 | ||
411 | static const struct usb_cdc_header_desc gs_header_desc = { | |
412 | .bLength = sizeof(gs_header_desc), | |
413 | .bDescriptorType = USB_DT_CS_INTERFACE, | |
414 | .bDescriptorSubType = USB_CDC_HEADER_TYPE, | |
415 | .bcdCDC = __constant_cpu_to_le16(0x0110), | |
416 | }; | |
417 | ||
418 | static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = { | |
419 | .bLength = sizeof(gs_call_mgmt_descriptor), | |
420 | .bDescriptorType = USB_DT_CS_INTERFACE, | |
421 | .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, | |
422 | .bmCapabilities = 0, | |
423 | .bDataInterface = 1, /* index of data interface */ | |
424 | }; | |
425 | ||
426 | static struct usb_cdc_acm_descriptor gs_acm_descriptor = { | |
427 | .bLength = sizeof(gs_acm_descriptor), | |
428 | .bDescriptorType = USB_DT_CS_INTERFACE, | |
429 | .bDescriptorSubType = USB_CDC_ACM_TYPE, | |
430 | .bmCapabilities = 0, | |
431 | }; | |
432 | ||
433 | static const struct usb_cdc_union_desc gs_union_desc = { | |
434 | .bLength = sizeof(gs_union_desc), | |
435 | .bDescriptorType = USB_DT_CS_INTERFACE, | |
436 | .bDescriptorSubType = USB_CDC_UNION_TYPE, | |
437 | .bMasterInterface0 = 0, /* index of control interface */ | |
438 | .bSlaveInterface0 = 1, /* index of data interface */ | |
439 | }; | |
440 | ||
441 | static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = { | |
442 | .bLength = USB_DT_ENDPOINT_SIZE, | |
443 | .bDescriptorType = USB_DT_ENDPOINT, | |
444 | .bEndpointAddress = USB_DIR_IN, | |
445 | .bmAttributes = USB_ENDPOINT_XFER_INT, | |
446 | .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), | |
447 | .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, | |
448 | }; | |
449 | ||
450 | static struct usb_endpoint_descriptor gs_fullspeed_in_desc = { | |
451 | .bLength = USB_DT_ENDPOINT_SIZE, | |
452 | .bDescriptorType = USB_DT_ENDPOINT, | |
453 | .bEndpointAddress = USB_DIR_IN, | |
454 | .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
455 | }; | |
456 | ||
457 | static struct usb_endpoint_descriptor gs_fullspeed_out_desc = { | |
458 | .bLength = USB_DT_ENDPOINT_SIZE, | |
459 | .bDescriptorType = USB_DT_ENDPOINT, | |
460 | .bEndpointAddress = USB_DIR_OUT, | |
461 | .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
462 | }; | |
463 | ||
464 | static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = { | |
465 | (struct usb_descriptor_header *) &gs_otg_descriptor, | |
466 | (struct usb_descriptor_header *) &gs_bulk_interface_desc, | |
467 | (struct usb_descriptor_header *) &gs_fullspeed_in_desc, | |
468 | (struct usb_descriptor_header *) &gs_fullspeed_out_desc, | |
469 | NULL, | |
470 | }; | |
471 | ||
472 | static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = { | |
473 | (struct usb_descriptor_header *) &gs_otg_descriptor, | |
474 | (struct usb_descriptor_header *) &gs_control_interface_desc, | |
475 | (struct usb_descriptor_header *) &gs_header_desc, | |
476 | (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, | |
477 | (struct usb_descriptor_header *) &gs_acm_descriptor, | |
478 | (struct usb_descriptor_header *) &gs_union_desc, | |
479 | (struct usb_descriptor_header *) &gs_fullspeed_notify_desc, | |
480 | (struct usb_descriptor_header *) &gs_data_interface_desc, | |
481 | (struct usb_descriptor_header *) &gs_fullspeed_in_desc, | |
482 | (struct usb_descriptor_header *) &gs_fullspeed_out_desc, | |
483 | NULL, | |
484 | }; | |
485 | ||
486 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
487 | static struct usb_endpoint_descriptor gs_highspeed_notify_desc = { | |
488 | .bLength = USB_DT_ENDPOINT_SIZE, | |
489 | .bDescriptorType = USB_DT_ENDPOINT, | |
490 | .bEndpointAddress = USB_DIR_IN, | |
491 | .bmAttributes = USB_ENDPOINT_XFER_INT, | |
492 | .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), | |
493 | .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, | |
494 | }; | |
495 | ||
496 | static struct usb_endpoint_descriptor gs_highspeed_in_desc = { | |
497 | .bLength = USB_DT_ENDPOINT_SIZE, | |
498 | .bDescriptorType = USB_DT_ENDPOINT, | |
499 | .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
500 | .wMaxPacketSize = __constant_cpu_to_le16(512), | |
501 | }; | |
502 | ||
503 | static struct usb_endpoint_descriptor gs_highspeed_out_desc = { | |
504 | .bLength = USB_DT_ENDPOINT_SIZE, | |
505 | .bDescriptorType = USB_DT_ENDPOINT, | |
506 | .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
507 | .wMaxPacketSize = __constant_cpu_to_le16(512), | |
508 | }; | |
509 | ||
510 | static struct usb_qualifier_descriptor gs_qualifier_desc = { | |
511 | .bLength = sizeof(struct usb_qualifier_descriptor), | |
512 | .bDescriptorType = USB_DT_DEVICE_QUALIFIER, | |
513 | .bcdUSB = __constant_cpu_to_le16 (0x0200), | |
514 | /* assumes ep0 uses the same value for both speeds ... */ | |
515 | .bNumConfigurations = GS_NUM_CONFIGS, | |
516 | }; | |
517 | ||
518 | static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = { | |
519 | (struct usb_descriptor_header *) &gs_otg_descriptor, | |
520 | (struct usb_descriptor_header *) &gs_bulk_interface_desc, | |
521 | (struct usb_descriptor_header *) &gs_highspeed_in_desc, | |
522 | (struct usb_descriptor_header *) &gs_highspeed_out_desc, | |
523 | NULL, | |
524 | }; | |
525 | ||
526 | static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { | |
527 | (struct usb_descriptor_header *) &gs_otg_descriptor, | |
528 | (struct usb_descriptor_header *) &gs_control_interface_desc, | |
529 | (struct usb_descriptor_header *) &gs_header_desc, | |
530 | (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, | |
531 | (struct usb_descriptor_header *) &gs_acm_descriptor, | |
532 | (struct usb_descriptor_header *) &gs_union_desc, | |
533 | (struct usb_descriptor_header *) &gs_highspeed_notify_desc, | |
534 | (struct usb_descriptor_header *) &gs_data_interface_desc, | |
535 | (struct usb_descriptor_header *) &gs_highspeed_in_desc, | |
536 | (struct usb_descriptor_header *) &gs_highspeed_out_desc, | |
537 | NULL, | |
538 | }; | |
539 | ||
540 | #endif /* CONFIG_USB_GADGET_DUALSPEED */ | |
541 | ||
542 | ||
543 | /* Module */ | |
544 | MODULE_DESCRIPTION(GS_LONG_NAME); | |
545 | MODULE_AUTHOR("Al Borchers"); | |
546 | MODULE_LICENSE("GPL"); | |
547 | ||
548 | #ifdef GS_DEBUG | |
549 | module_param(debug, int, S_IRUGO|S_IWUSR); | |
550 | MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); | |
551 | #endif | |
552 | ||
553 | module_param(read_q_size, uint, S_IRUGO); | |
554 | MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32"); | |
555 | ||
556 | module_param(write_q_size, uint, S_IRUGO); | |
557 | MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32"); | |
558 | ||
559 | module_param(write_buf_size, uint, S_IRUGO); | |
560 | MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192"); | |
561 | ||
562 | module_param(use_acm, uint, S_IRUGO); | |
563 | MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no"); | |
564 | ||
565 | module_init(gs_module_init); | |
566 | module_exit(gs_module_exit); | |
567 | ||
568 | /* | |
569 | * gs_module_init | |
570 | * | |
571 | * Register as a USB gadget driver and a tty driver. | |
572 | */ | |
573 | static int __init gs_module_init(void) | |
574 | { | |
575 | int i; | |
576 | int retval; | |
577 | ||
578 | retval = usb_gadget_register_driver(&gs_gadget_driver); | |
579 | if (retval) { | |
580 | printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval); | |
581 | return retval; | |
582 | } | |
583 | ||
584 | gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS); | |
585 | if (!gs_tty_driver) | |
586 | return -ENOMEM; | |
587 | gs_tty_driver->owner = THIS_MODULE; | |
588 | gs_tty_driver->driver_name = GS_SHORT_NAME; | |
589 | gs_tty_driver->name = "ttygs"; | |
1da177e4 LT |
590 | gs_tty_driver->major = GS_MAJOR; |
591 | gs_tty_driver->minor_start = GS_MINOR_START; | |
592 | gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
593 | gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; | |
331b8319 | 594 | gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
1da177e4 LT |
595 | gs_tty_driver->init_termios = tty_std_termios; |
596 | gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
597 | tty_set_operations(gs_tty_driver, &gs_tty_ops); | |
598 | ||
599 | for (i=0; i < GS_NUM_PORTS; i++) | |
600 | sema_init(&gs_open_close_sem[i], 1); | |
601 | ||
602 | retval = tty_register_driver(gs_tty_driver); | |
603 | if (retval) { | |
604 | usb_gadget_unregister_driver(&gs_gadget_driver); | |
605 | put_tty_driver(gs_tty_driver); | |
606 | printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval); | |
607 | return retval; | |
608 | } | |
609 | ||
610 | printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR); | |
611 | return 0; | |
612 | } | |
613 | ||
614 | /* | |
615 | * gs_module_exit | |
616 | * | |
617 | * Unregister as a tty driver and a USB gadget driver. | |
618 | */ | |
619 | static void __exit gs_module_exit(void) | |
620 | { | |
621 | tty_unregister_driver(gs_tty_driver); | |
622 | put_tty_driver(gs_tty_driver); | |
623 | usb_gadget_unregister_driver(&gs_gadget_driver); | |
624 | ||
625 | printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR); | |
626 | } | |
627 | ||
628 | /* TTY Driver */ | |
629 | ||
630 | /* | |
631 | * gs_open | |
632 | */ | |
633 | static int gs_open(struct tty_struct *tty, struct file *file) | |
634 | { | |
635 | int port_num; | |
636 | unsigned long flags; | |
637 | struct gs_port *port; | |
638 | struct gs_dev *dev; | |
639 | struct gs_buf *buf; | |
640 | struct semaphore *sem; | |
641 | int ret; | |
642 | ||
643 | port_num = tty->index; | |
644 | ||
645 | gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file); | |
646 | ||
647 | if (port_num < 0 || port_num >= GS_NUM_PORTS) { | |
648 | printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n", | |
649 | port_num, tty, file); | |
650 | return -ENODEV; | |
651 | } | |
652 | ||
653 | dev = gs_device; | |
654 | ||
655 | if (dev == NULL) { | |
656 | printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n", | |
657 | port_num, tty, file); | |
658 | return -ENODEV; | |
659 | } | |
660 | ||
661 | sem = &gs_open_close_sem[port_num]; | |
662 | if (down_interruptible(sem)) { | |
663 | printk(KERN_ERR | |
664 | "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n", | |
665 | port_num, tty, file); | |
666 | return -ERESTARTSYS; | |
667 | } | |
668 | ||
669 | spin_lock_irqsave(&dev->dev_lock, flags); | |
670 | ||
671 | if (dev->dev_config == GS_NO_CONFIG_ID) { | |
672 | printk(KERN_ERR | |
673 | "gs_open: (%d,%p,%p) device is not connected\n", | |
674 | port_num, tty, file); | |
675 | ret = -ENODEV; | |
676 | goto exit_unlock_dev; | |
677 | } | |
678 | ||
679 | port = dev->dev_port[port_num]; | |
680 | ||
681 | if (port == NULL) { | |
682 | printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n", | |
683 | port_num, tty, file); | |
684 | ret = -ENODEV; | |
685 | goto exit_unlock_dev; | |
686 | } | |
687 | ||
688 | spin_lock(&port->port_lock); | |
689 | spin_unlock(&dev->dev_lock); | |
690 | ||
691 | if (port->port_dev == NULL) { | |
692 | printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n", | |
693 | port_num, tty, file); | |
694 | ret = -EIO; | |
695 | goto exit_unlock_port; | |
696 | } | |
697 | ||
698 | if (port->port_open_count > 0) { | |
699 | ++port->port_open_count; | |
700 | gs_debug("gs_open: (%d,%p,%p) already open\n", | |
701 | port_num, tty, file); | |
702 | ret = 0; | |
703 | goto exit_unlock_port; | |
704 | } | |
705 | ||
706 | tty->driver_data = NULL; | |
707 | ||
708 | /* mark port as in use, we can drop port lock and sleep if necessary */ | |
709 | port->port_in_use = 1; | |
710 | ||
711 | /* allocate write buffer on first open */ | |
712 | if (port->port_write_buf == NULL) { | |
713 | spin_unlock_irqrestore(&port->port_lock, flags); | |
714 | buf = gs_buf_alloc(write_buf_size, GFP_KERNEL); | |
715 | spin_lock_irqsave(&port->port_lock, flags); | |
716 | ||
717 | /* might have been disconnected while asleep, check */ | |
718 | if (port->port_dev == NULL) { | |
719 | printk(KERN_ERR | |
720 | "gs_open: (%d,%p,%p) port disconnected (2)\n", | |
721 | port_num, tty, file); | |
722 | port->port_in_use = 0; | |
723 | ret = -EIO; | |
724 | goto exit_unlock_port; | |
725 | } | |
726 | ||
727 | if ((port->port_write_buf=buf) == NULL) { | |
728 | printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n", | |
729 | port_num, tty, file); | |
730 | port->port_in_use = 0; | |
731 | ret = -ENOMEM; | |
732 | goto exit_unlock_port; | |
733 | } | |
734 | ||
735 | } | |
736 | ||
737 | /* wait for carrier detect (not implemented) */ | |
738 | ||
739 | /* might have been disconnected while asleep, check */ | |
740 | if (port->port_dev == NULL) { | |
741 | printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n", | |
742 | port_num, tty, file); | |
743 | port->port_in_use = 0; | |
744 | ret = -EIO; | |
745 | goto exit_unlock_port; | |
746 | } | |
747 | ||
748 | tty->driver_data = port; | |
749 | port->port_tty = tty; | |
750 | port->port_open_count = 1; | |
751 | port->port_in_use = 0; | |
752 | ||
753 | gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file); | |
754 | ||
755 | ret = 0; | |
756 | ||
757 | exit_unlock_port: | |
758 | spin_unlock_irqrestore(&port->port_lock, flags); | |
759 | up(sem); | |
760 | return ret; | |
761 | ||
762 | exit_unlock_dev: | |
763 | spin_unlock_irqrestore(&dev->dev_lock, flags); | |
764 | up(sem); | |
765 | return ret; | |
766 | ||
767 | } | |
768 | ||
769 | /* | |
770 | * gs_close | |
771 | */ | |
943e1b4d FBH |
772 | |
773 | #define GS_WRITE_FINISHED_EVENT_SAFELY(p) \ | |
774 | ({ \ | |
943e1b4d FBH |
775 | int cond; \ |
776 | \ | |
ca094f11 | 777 | spin_lock_irq(&(p)->port_lock); \ |
943e1b4d | 778 | cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \ |
ca094f11 | 779 | spin_unlock_irq(&(p)->port_lock); \ |
943e1b4d FBH |
780 | cond; \ |
781 | }) | |
782 | ||
1da177e4 LT |
783 | static void gs_close(struct tty_struct *tty, struct file *file) |
784 | { | |
1da177e4 LT |
785 | struct gs_port *port = tty->driver_data; |
786 | struct semaphore *sem; | |
787 | ||
788 | if (port == NULL) { | |
789 | printk(KERN_ERR "gs_close: NULL port pointer\n"); | |
790 | return; | |
791 | } | |
792 | ||
793 | gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file); | |
794 | ||
795 | sem = &gs_open_close_sem[port->port_num]; | |
796 | down(sem); | |
797 | ||
ca094f11 | 798 | spin_lock_irq(&port->port_lock); |
1da177e4 LT |
799 | |
800 | if (port->port_open_count == 0) { | |
801 | printk(KERN_ERR | |
802 | "gs_close: (%d,%p,%p) port is already closed\n", | |
803 | port->port_num, tty, file); | |
804 | goto exit; | |
805 | } | |
806 | ||
807 | if (port->port_open_count > 1) { | |
808 | --port->port_open_count; | |
809 | goto exit; | |
810 | } | |
811 | ||
812 | /* free disconnected port on final close */ | |
813 | if (port->port_dev == NULL) { | |
814 | kfree(port); | |
815 | goto exit; | |
816 | } | |
817 | ||
818 | /* mark port as closed but in use, we can drop port lock */ | |
819 | /* and sleep if necessary */ | |
820 | port->port_in_use = 1; | |
821 | port->port_open_count = 0; | |
822 | ||
823 | /* wait for write buffer to drain, or */ | |
824 | /* at most GS_CLOSE_TIMEOUT seconds */ | |
825 | if (gs_buf_data_avail(port->port_write_buf) > 0) { | |
ca094f11 | 826 | spin_unlock_irq(&port->port_lock); |
943e1b4d FBH |
827 | wait_event_interruptible_timeout(port->port_write_wait, |
828 | GS_WRITE_FINISHED_EVENT_SAFELY(port), | |
829 | GS_CLOSE_TIMEOUT * HZ); | |
ca094f11 | 830 | spin_lock_irq(&port->port_lock); |
1da177e4 LT |
831 | } |
832 | ||
833 | /* free disconnected port on final close */ | |
834 | /* (might have happened during the above sleep) */ | |
835 | if (port->port_dev == NULL) { | |
836 | kfree(port); | |
837 | goto exit; | |
838 | } | |
839 | ||
840 | gs_buf_clear(port->port_write_buf); | |
841 | ||
842 | tty->driver_data = NULL; | |
843 | port->port_tty = NULL; | |
844 | port->port_in_use = 0; | |
845 | ||
846 | gs_debug("gs_close: (%d,%p,%p) completed\n", | |
847 | port->port_num, tty, file); | |
848 | ||
849 | exit: | |
ca094f11 | 850 | spin_unlock_irq(&port->port_lock); |
1da177e4 LT |
851 | up(sem); |
852 | } | |
853 | ||
854 | /* | |
855 | * gs_write | |
856 | */ | |
857 | static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) | |
858 | { | |
859 | unsigned long flags; | |
860 | struct gs_port *port = tty->driver_data; | |
861 | int ret; | |
862 | ||
863 | if (port == NULL) { | |
864 | printk(KERN_ERR "gs_write: NULL port pointer\n"); | |
865 | return -EIO; | |
866 | } | |
867 | ||
868 | gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty, | |
869 | count); | |
870 | ||
871 | if (count == 0) | |
872 | return 0; | |
873 | ||
874 | spin_lock_irqsave(&port->port_lock, flags); | |
875 | ||
876 | if (port->port_dev == NULL) { | |
877 | printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n", | |
878 | port->port_num, tty); | |
879 | ret = -EIO; | |
880 | goto exit; | |
881 | } | |
882 | ||
883 | if (port->port_open_count == 0) { | |
884 | printk(KERN_ERR "gs_write: (%d,%p) port is closed\n", | |
885 | port->port_num, tty); | |
886 | ret = -EBADF; | |
887 | goto exit; | |
888 | } | |
889 | ||
890 | count = gs_buf_put(port->port_write_buf, buf, count); | |
891 | ||
892 | spin_unlock_irqrestore(&port->port_lock, flags); | |
893 | ||
894 | gs_send(gs_device); | |
895 | ||
896 | gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty, | |
897 | count); | |
898 | ||
899 | return count; | |
900 | ||
901 | exit: | |
902 | spin_unlock_irqrestore(&port->port_lock, flags); | |
903 | return ret; | |
904 | } | |
905 | ||
906 | /* | |
907 | * gs_put_char | |
908 | */ | |
909 | static void gs_put_char(struct tty_struct *tty, unsigned char ch) | |
910 | { | |
911 | unsigned long flags; | |
912 | struct gs_port *port = tty->driver_data; | |
913 | ||
914 | if (port == NULL) { | |
915 | printk(KERN_ERR "gs_put_char: NULL port pointer\n"); | |
916 | return; | |
917 | } | |
918 | ||
919 | gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2)); | |
920 | ||
921 | spin_lock_irqsave(&port->port_lock, flags); | |
922 | ||
923 | if (port->port_dev == NULL) { | |
924 | printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n", | |
925 | port->port_num, tty); | |
926 | goto exit; | |
927 | } | |
928 | ||
929 | if (port->port_open_count == 0) { | |
930 | printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n", | |
931 | port->port_num, tty); | |
932 | goto exit; | |
933 | } | |
934 | ||
935 | gs_buf_put(port->port_write_buf, &ch, 1); | |
936 | ||
937 | exit: | |
938 | spin_unlock_irqrestore(&port->port_lock, flags); | |
939 | } | |
940 | ||
941 | /* | |
942 | * gs_flush_chars | |
943 | */ | |
944 | static void gs_flush_chars(struct tty_struct *tty) | |
945 | { | |
946 | unsigned long flags; | |
947 | struct gs_port *port = tty->driver_data; | |
948 | ||
949 | if (port == NULL) { | |
950 | printk(KERN_ERR "gs_flush_chars: NULL port pointer\n"); | |
951 | return; | |
952 | } | |
953 | ||
954 | gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); | |
955 | ||
956 | spin_lock_irqsave(&port->port_lock, flags); | |
957 | ||
958 | if (port->port_dev == NULL) { | |
959 | printk(KERN_ERR | |
960 | "gs_flush_chars: (%d,%p) port is not connected\n", | |
961 | port->port_num, tty); | |
962 | goto exit; | |
963 | } | |
964 | ||
965 | if (port->port_open_count == 0) { | |
966 | printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n", | |
967 | port->port_num, tty); | |
968 | goto exit; | |
969 | } | |
970 | ||
971 | spin_unlock_irqrestore(&port->port_lock, flags); | |
972 | ||
973 | gs_send(gs_device); | |
974 | ||
975 | return; | |
976 | ||
977 | exit: | |
978 | spin_unlock_irqrestore(&port->port_lock, flags); | |
979 | } | |
980 | ||
981 | /* | |
982 | * gs_write_room | |
983 | */ | |
984 | static int gs_write_room(struct tty_struct *tty) | |
985 | { | |
986 | ||
987 | int room = 0; | |
988 | unsigned long flags; | |
989 | struct gs_port *port = tty->driver_data; | |
990 | ||
991 | ||
992 | if (port == NULL) | |
993 | return 0; | |
994 | ||
995 | spin_lock_irqsave(&port->port_lock, flags); | |
996 | ||
997 | if (port->port_dev != NULL && port->port_open_count > 0 | |
998 | && port->port_write_buf != NULL) | |
999 | room = gs_buf_space_avail(port->port_write_buf); | |
1000 | ||
1001 | spin_unlock_irqrestore(&port->port_lock, flags); | |
1002 | ||
1003 | gs_debug("gs_write_room: (%d,%p) room=%d\n", | |
1004 | port->port_num, tty, room); | |
1005 | ||
1006 | return room; | |
1007 | } | |
1008 | ||
1009 | /* | |
1010 | * gs_chars_in_buffer | |
1011 | */ | |
1012 | static int gs_chars_in_buffer(struct tty_struct *tty) | |
1013 | { | |
1014 | int chars = 0; | |
1015 | unsigned long flags; | |
1016 | struct gs_port *port = tty->driver_data; | |
1017 | ||
1018 | if (port == NULL) | |
1019 | return 0; | |
1020 | ||
1021 | spin_lock_irqsave(&port->port_lock, flags); | |
1022 | ||
1023 | if (port->port_dev != NULL && port->port_open_count > 0 | |
1024 | && port->port_write_buf != NULL) | |
1025 | chars = gs_buf_data_avail(port->port_write_buf); | |
1026 | ||
1027 | spin_unlock_irqrestore(&port->port_lock, flags); | |
1028 | ||
1029 | gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n", | |
1030 | port->port_num, tty, chars); | |
1031 | ||
1032 | return chars; | |
1033 | } | |
1034 | ||
1035 | /* | |
1036 | * gs_throttle | |
1037 | */ | |
1038 | static void gs_throttle(struct tty_struct *tty) | |
1039 | { | |
1040 | } | |
1041 | ||
1042 | /* | |
1043 | * gs_unthrottle | |
1044 | */ | |
1045 | static void gs_unthrottle(struct tty_struct *tty) | |
1046 | { | |
1047 | } | |
1048 | ||
1049 | /* | |
1050 | * gs_break | |
1051 | */ | |
1052 | static void gs_break(struct tty_struct *tty, int break_state) | |
1053 | { | |
1054 | } | |
1055 | ||
1056 | /* | |
1057 | * gs_ioctl | |
1058 | */ | |
1059 | static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) | |
1060 | { | |
1061 | struct gs_port *port = tty->driver_data; | |
1062 | ||
1063 | if (port == NULL) { | |
1064 | printk(KERN_ERR "gs_ioctl: NULL port pointer\n"); | |
1065 | return -EIO; | |
1066 | } | |
1067 | ||
1068 | gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n", | |
1069 | port->port_num, tty, file, cmd, arg); | |
1070 | ||
1071 | /* handle ioctls */ | |
1072 | ||
1073 | /* could not handle ioctl */ | |
1074 | return -ENOIOCTLCMD; | |
1075 | } | |
1076 | ||
1077 | /* | |
1078 | * gs_set_termios | |
1079 | */ | |
606d099c | 1080 | static void gs_set_termios(struct tty_struct *tty, struct ktermios *old) |
1da177e4 LT |
1081 | { |
1082 | } | |
1083 | ||
1084 | /* | |
1085 | * gs_send | |
1086 | * | |
1087 | * This function finds available write requests, calls | |
1088 | * gs_send_packet to fill these packets with data, and | |
1089 | * continues until either there are no more write requests | |
1090 | * available or no more data to send. This function is | |
1091 | * run whenever data arrives or write requests are available. | |
1092 | */ | |
1093 | static int gs_send(struct gs_dev *dev) | |
1094 | { | |
1095 | int ret,len; | |
1096 | unsigned long flags; | |
1097 | struct usb_ep *ep; | |
1098 | struct usb_request *req; | |
1099 | struct gs_req_entry *req_entry; | |
1100 | ||
1101 | if (dev == NULL) { | |
1102 | printk(KERN_ERR "gs_send: NULL device pointer\n"); | |
1103 | return -ENODEV; | |
1104 | } | |
1105 | ||
1106 | spin_lock_irqsave(&dev->dev_lock, flags); | |
1107 | ||
1108 | ep = dev->dev_in_ep; | |
1109 | ||
1110 | while(!list_empty(&dev->dev_req_list)) { | |
1111 | ||
1112 | req_entry = list_entry(dev->dev_req_list.next, | |
1113 | struct gs_req_entry, re_entry); | |
1114 | ||
1115 | req = req_entry->re_req; | |
1116 | ||
1117 | len = gs_send_packet(dev, req->buf, ep->maxpacket); | |
1118 | ||
1119 | if (len > 0) { | |
1120 | gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); | |
1121 | list_del(&req_entry->re_entry); | |
1122 | req->length = len; | |
80f8af0c | 1123 | spin_unlock_irqrestore(&dev->dev_lock, flags); |
1da177e4 LT |
1124 | if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { |
1125 | printk(KERN_ERR | |
1126 | "gs_send: cannot queue read request, ret=%d\n", | |
1127 | ret); | |
80f8af0c | 1128 | spin_lock_irqsave(&dev->dev_lock, flags); |
1da177e4 LT |
1129 | break; |
1130 | } | |
80f8af0c | 1131 | spin_lock_irqsave(&dev->dev_lock, flags); |
1da177e4 LT |
1132 | } else { |
1133 | break; | |
1134 | } | |
1135 | ||
1136 | } | |
1137 | ||
1138 | spin_unlock_irqrestore(&dev->dev_lock, flags); | |
1139 | ||
1140 | return 0; | |
1141 | } | |
1142 | ||
1143 | /* | |
1144 | * gs_send_packet | |
1145 | * | |
1146 | * If there is data to send, a packet is built in the given | |
1147 | * buffer and the size is returned. If there is no data to | |
1148 | * send, 0 is returned. If there is any error a negative | |
1149 | * error number is returned. | |
1150 | * | |
1151 | * Called during USB completion routine, on interrupt time. | |
1152 | * | |
1153 | * We assume that disconnect will not happen until all completion | |
1154 | * routines have completed, so we can assume that the dev_port | |
1155 | * array does not change during the lifetime of this function. | |
1156 | */ | |
1157 | static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size) | |
1158 | { | |
1159 | unsigned int len; | |
1160 | struct gs_port *port; | |
1161 | ||
1162 | /* TEMPORARY -- only port 0 is supported right now */ | |
1163 | port = dev->dev_port[0]; | |
1164 | ||
1165 | if (port == NULL) { | |
1166 | printk(KERN_ERR | |
1167 | "gs_send_packet: port=%d, NULL port pointer\n", | |
1168 | 0); | |
1169 | return -EIO; | |
1170 | } | |
1171 | ||
1172 | spin_lock(&port->port_lock); | |
1173 | ||
1174 | len = gs_buf_data_avail(port->port_write_buf); | |
1175 | if (len < size) | |
1176 | size = len; | |
1177 | ||
1178 | if (size == 0) | |
1179 | goto exit; | |
1180 | ||
1181 | size = gs_buf_get(port->port_write_buf, packet, size); | |
1182 | ||
1183 | if (port->port_tty) | |
1184 | wake_up_interruptible(&port->port_tty->write_wait); | |
1185 | ||
1186 | exit: | |
1187 | spin_unlock(&port->port_lock); | |
1188 | return size; | |
1189 | } | |
1190 | ||
1191 | /* | |
1192 | * gs_recv_packet | |
1193 | * | |
1194 | * Called for each USB packet received. Reads the packet | |
1195 | * header and stuffs the data in the appropriate tty buffer. | |
1196 | * Returns 0 if successful, or a negative error number. | |
1197 | * | |
1198 | * Called during USB completion routine, on interrupt time. | |
1199 | * | |
1200 | * We assume that disconnect will not happen until all completion | |
1201 | * routines have completed, so we can assume that the dev_port | |
1202 | * array does not change during the lifetime of this function. | |
1203 | */ | |
1204 | static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size) | |
1205 | { | |
1206 | unsigned int len; | |
1207 | struct gs_port *port; | |
1208 | int ret; | |
33f0f88f | 1209 | struct tty_struct *tty; |
1da177e4 LT |
1210 | |
1211 | /* TEMPORARY -- only port 0 is supported right now */ | |
1212 | port = dev->dev_port[0]; | |
1213 | ||
1214 | if (port == NULL) { | |
1215 | printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n", | |
1216 | port->port_num); | |
1217 | return -EIO; | |
1218 | } | |
1219 | ||
1220 | spin_lock(&port->port_lock); | |
1221 | ||
1222 | if (port->port_open_count == 0) { | |
1223 | printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n", | |
1224 | port->port_num); | |
1225 | ret = -EIO; | |
1226 | goto exit; | |
1227 | } | |
1228 | ||
33f0f88f AC |
1229 | |
1230 | tty = port->port_tty; | |
1231 | ||
1232 | if (tty == NULL) { | |
1da177e4 LT |
1233 | printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n", |
1234 | port->port_num); | |
1235 | ret = -EIO; | |
1236 | goto exit; | |
1237 | } | |
1238 | ||
1239 | if (port->port_tty->magic != TTY_MAGIC) { | |
1240 | printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n", | |
1241 | port->port_num); | |
1242 | ret = -EIO; | |
1243 | goto exit; | |
1244 | } | |
1245 | ||
33f0f88f AC |
1246 | len = tty_buffer_request_room(tty, size); |
1247 | if (len > 0) { | |
1248 | tty_insert_flip_string(tty, packet, len); | |
1da177e4 LT |
1249 | tty_flip_buffer_push(port->port_tty); |
1250 | wake_up_interruptible(&port->port_tty->read_wait); | |
1251 | } | |
1da177e4 | 1252 | ret = 0; |
1da177e4 LT |
1253 | exit: |
1254 | spin_unlock(&port->port_lock); | |
1255 | return ret; | |
1256 | } | |
1257 | ||
1258 | /* | |
1259 | * gs_read_complete | |
1260 | */ | |
1261 | static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) | |
1262 | { | |
1263 | int ret; | |
1264 | struct gs_dev *dev = ep->driver_data; | |
1265 | ||
1266 | if (dev == NULL) { | |
1267 | printk(KERN_ERR "gs_read_complete: NULL device pointer\n"); | |
1268 | return; | |
1269 | } | |
1270 | ||
1271 | switch(req->status) { | |
1272 | case 0: | |
1273 | /* normal completion */ | |
1274 | gs_recv_packet(dev, req->buf, req->actual); | |
1275 | requeue: | |
1276 | req->length = ep->maxpacket; | |
1277 | if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { | |
1278 | printk(KERN_ERR | |
1279 | "gs_read_complete: cannot queue read request, ret=%d\n", | |
1280 | ret); | |
1281 | } | |
1282 | break; | |
1283 | ||
1284 | case -ESHUTDOWN: | |
1285 | /* disconnect */ | |
1286 | gs_debug("gs_read_complete: shutdown\n"); | |
1287 | gs_free_req(ep, req); | |
1288 | break; | |
1289 | ||
1290 | default: | |
1291 | /* unexpected */ | |
1292 | printk(KERN_ERR | |
1293 | "gs_read_complete: unexpected status error, status=%d\n", | |
1294 | req->status); | |
1295 | goto requeue; | |
1296 | break; | |
1297 | } | |
1298 | } | |
1299 | ||
1300 | /* | |
1301 | * gs_write_complete | |
1302 | */ | |
1303 | static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) | |
1304 | { | |
1305 | struct gs_dev *dev = ep->driver_data; | |
1306 | struct gs_req_entry *gs_req = req->context; | |
1307 | ||
1308 | if (dev == NULL) { | |
1309 | printk(KERN_ERR "gs_write_complete: NULL device pointer\n"); | |
1310 | return; | |
1311 | } | |
1312 | ||
1313 | switch(req->status) { | |
1314 | case 0: | |
1315 | /* normal completion */ | |
1316 | requeue: | |
1317 | if (gs_req == NULL) { | |
1318 | printk(KERN_ERR | |
1319 | "gs_write_complete: NULL request pointer\n"); | |
1320 | return; | |
1321 | } | |
1322 | ||
1323 | spin_lock(&dev->dev_lock); | |
1324 | list_add(&gs_req->re_entry, &dev->dev_req_list); | |
1325 | spin_unlock(&dev->dev_lock); | |
1326 | ||
1327 | gs_send(dev); | |
1328 | ||
1329 | break; | |
1330 | ||
1331 | case -ESHUTDOWN: | |
1332 | /* disconnect */ | |
1333 | gs_debug("gs_write_complete: shutdown\n"); | |
1334 | gs_free_req(ep, req); | |
1335 | break; | |
1336 | ||
1337 | default: | |
1338 | printk(KERN_ERR | |
1339 | "gs_write_complete: unexpected status error, status=%d\n", | |
1340 | req->status); | |
1341 | goto requeue; | |
1342 | break; | |
1343 | } | |
1344 | } | |
1345 | ||
1346 | /* Gadget Driver */ | |
1347 | ||
1348 | /* | |
1349 | * gs_bind | |
1350 | * | |
1351 | * Called on module load. Allocates and initializes the device | |
1352 | * structure and a control request. | |
1353 | */ | |
329af28b | 1354 | static int __init gs_bind(struct usb_gadget *gadget) |
1da177e4 LT |
1355 | { |
1356 | int ret; | |
1357 | struct usb_ep *ep; | |
1358 | struct gs_dev *dev; | |
91e79c91 | 1359 | int gcnum; |
1da177e4 | 1360 | |
91e79c91 DB |
1361 | /* Some controllers can't support CDC ACM: |
1362 | * - sh doesn't support multiple interfaces or configs; | |
1363 | * - sa1100 doesn't have a third interrupt endpoint | |
1364 | */ | |
1365 | if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget)) | |
1da177e4 | 1366 | use_acm = 0; |
91e79c91 DB |
1367 | |
1368 | gcnum = usb_gadget_controller_number(gadget); | |
1369 | if (gcnum >= 0) | |
1da177e4 | 1370 | gs_device_desc.bcdDevice = |
91e79c91 DB |
1371 | cpu_to_le16(GS_VERSION_NUM | gcnum); |
1372 | else { | |
1da177e4 LT |
1373 | printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n", |
1374 | gadget->name); | |
1375 | /* unrecognized, but safe unless bulk is REALLY quirky */ | |
1376 | gs_device_desc.bcdDevice = | |
1377 | __constant_cpu_to_le16(GS_VERSION_NUM|0x0099); | |
1378 | } | |
1379 | ||
1380 | usb_ep_autoconfig_reset(gadget); | |
1381 | ||
1382 | ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); | |
1383 | if (!ep) | |
1384 | goto autoconf_fail; | |
1385 | EP_IN_NAME = ep->name; | |
1386 | ep->driver_data = ep; /* claim the endpoint */ | |
1387 | ||
1388 | ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); | |
1389 | if (!ep) | |
1390 | goto autoconf_fail; | |
1391 | EP_OUT_NAME = ep->name; | |
1392 | ep->driver_data = ep; /* claim the endpoint */ | |
1393 | ||
1394 | if (use_acm) { | |
1395 | ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc); | |
1396 | if (!ep) { | |
1397 | printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name); | |
1398 | goto autoconf_fail; | |
1399 | } | |
1400 | gs_device_desc.idProduct = __constant_cpu_to_le16( | |
1401 | GS_CDC_PRODUCT_ID), | |
1402 | EP_NOTIFY_NAME = ep->name; | |
1403 | ep->driver_data = ep; /* claim the endpoint */ | |
1404 | } | |
1405 | ||
1406 | gs_device_desc.bDeviceClass = use_acm | |
1407 | ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; | |
1408 | gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; | |
1409 | ||
1410 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
1411 | gs_qualifier_desc.bDeviceClass = use_acm | |
1412 | ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; | |
1413 | /* assume ep0 uses the same packet size for both speeds */ | |
1414 | gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0; | |
1415 | /* assume endpoints are dual-speed */ | |
1416 | gs_highspeed_notify_desc.bEndpointAddress = | |
1417 | gs_fullspeed_notify_desc.bEndpointAddress; | |
1418 | gs_highspeed_in_desc.bEndpointAddress = | |
1419 | gs_fullspeed_in_desc.bEndpointAddress; | |
1420 | gs_highspeed_out_desc.bEndpointAddress = | |
1421 | gs_fullspeed_out_desc.bEndpointAddress; | |
1422 | #endif /* CONFIG_USB_GADGET_DUALSPEED */ | |
1423 | ||
1424 | usb_gadget_set_selfpowered(gadget); | |
1425 | ||
1426 | if (gadget->is_otg) { | |
1427 | gs_otg_descriptor.bmAttributes |= USB_OTG_HNP, | |
1428 | gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; | |
1429 | gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; | |
1430 | } | |
1431 | ||
1432 | gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL); | |
1433 | if (dev == NULL) | |
1434 | return -ENOMEM; | |
1435 | ||
1436 | snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", | |
96b644bd | 1437 | init_utsname()->sysname, init_utsname()->release, |
1da177e4 LT |
1438 | gadget->name); |
1439 | ||
1440 | memset(dev, 0, sizeof(struct gs_dev)); | |
1441 | dev->dev_gadget = gadget; | |
1442 | spin_lock_init(&dev->dev_lock); | |
1443 | INIT_LIST_HEAD(&dev->dev_req_list); | |
1444 | set_gadget_data(gadget, dev); | |
1445 | ||
1446 | if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) { | |
1447 | printk(KERN_ERR "gs_bind: cannot allocate ports\n"); | |
1448 | gs_unbind(gadget); | |
1449 | return ret; | |
1450 | } | |
1451 | ||
1452 | /* preallocate control response and buffer */ | |
1453 | dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN, | |
1454 | GFP_KERNEL); | |
1455 | if (dev->dev_ctrl_req == NULL) { | |
1456 | gs_unbind(gadget); | |
1457 | return -ENOMEM; | |
1458 | } | |
1459 | dev->dev_ctrl_req->complete = gs_setup_complete; | |
1460 | ||
1461 | gadget->ep0->driver_data = dev; | |
1462 | ||
1463 | printk(KERN_INFO "gs_bind: %s %s bound\n", | |
1464 | GS_LONG_NAME, GS_VERSION_STR); | |
1465 | ||
1466 | return 0; | |
1467 | ||
1468 | autoconf_fail: | |
1469 | printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name); | |
1470 | return -ENODEV; | |
1471 | } | |
1472 | ||
1473 | /* | |
1474 | * gs_unbind | |
1475 | * | |
1476 | * Called on module unload. Frees the control request and device | |
1477 | * structure. | |
1478 | */ | |
a353678d | 1479 | static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) |
1da177e4 LT |
1480 | { |
1481 | struct gs_dev *dev = get_gadget_data(gadget); | |
1482 | ||
1483 | gs_device = NULL; | |
1484 | ||
1485 | /* read/write requests already freed, only control request remains */ | |
1486 | if (dev != NULL) { | |
1487 | if (dev->dev_ctrl_req != NULL) { | |
1488 | gs_free_req(gadget->ep0, dev->dev_ctrl_req); | |
1489 | dev->dev_ctrl_req = NULL; | |
1490 | } | |
1491 | gs_free_ports(dev); | |
1492 | kfree(dev); | |
1493 | set_gadget_data(gadget, NULL); | |
1494 | } | |
1495 | ||
1496 | printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME, | |
1497 | GS_VERSION_STR); | |
1498 | } | |
1499 | ||
1500 | /* | |
1501 | * gs_setup | |
1502 | * | |
1503 | * Implements all the control endpoint functionality that's not | |
1504 | * handled in hardware or the hardware driver. | |
1505 | * | |
1506 | * Returns the size of the data sent to the host, or a negative | |
1507 | * error number. | |
1508 | */ | |
1509 | static int gs_setup(struct usb_gadget *gadget, | |
1510 | const struct usb_ctrlrequest *ctrl) | |
1511 | { | |
1512 | int ret = -EOPNOTSUPP; | |
1513 | struct gs_dev *dev = get_gadget_data(gadget); | |
1514 | struct usb_request *req = dev->dev_ctrl_req; | |
1bbc1696 DB |
1515 | u16 wIndex = le16_to_cpu(ctrl->wIndex); |
1516 | u16 wValue = le16_to_cpu(ctrl->wValue); | |
1517 | u16 wLength = le16_to_cpu(ctrl->wLength); | |
1da177e4 LT |
1518 | |
1519 | switch (ctrl->bRequestType & USB_TYPE_MASK) { | |
1520 | case USB_TYPE_STANDARD: | |
1521 | ret = gs_setup_standard(gadget,ctrl); | |
1522 | break; | |
1523 | ||
1524 | case USB_TYPE_CLASS: | |
1525 | ret = gs_setup_class(gadget,ctrl); | |
1526 | break; | |
1527 | ||
1528 | default: | |
1529 | printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", | |
1530 | ctrl->bRequestType, ctrl->bRequest, | |
1531 | wValue, wIndex, wLength); | |
1532 | break; | |
1533 | } | |
1534 | ||
1535 | /* respond with data transfer before status phase? */ | |
1536 | if (ret >= 0) { | |
1537 | req->length = ret; | |
1538 | req->zero = ret < wLength | |
1539 | && (ret % gadget->ep0->maxpacket) == 0; | |
1540 | ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); | |
1541 | if (ret < 0) { | |
1542 | printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n", | |
1543 | ret); | |
1544 | req->status = 0; | |
1545 | gs_setup_complete(gadget->ep0, req); | |
1546 | } | |
1547 | } | |
1548 | ||
1549 | /* device either stalls (ret < 0) or reports success */ | |
1550 | return ret; | |
1551 | } | |
1552 | ||
1553 | static int gs_setup_standard(struct usb_gadget *gadget, | |
1554 | const struct usb_ctrlrequest *ctrl) | |
1555 | { | |
1556 | int ret = -EOPNOTSUPP; | |
1557 | struct gs_dev *dev = get_gadget_data(gadget); | |
1558 | struct usb_request *req = dev->dev_ctrl_req; | |
1bbc1696 DB |
1559 | u16 wIndex = le16_to_cpu(ctrl->wIndex); |
1560 | u16 wValue = le16_to_cpu(ctrl->wValue); | |
1561 | u16 wLength = le16_to_cpu(ctrl->wLength); | |
1da177e4 LT |
1562 | |
1563 | switch (ctrl->bRequest) { | |
1564 | case USB_REQ_GET_DESCRIPTOR: | |
1565 | if (ctrl->bRequestType != USB_DIR_IN) | |
1566 | break; | |
1567 | ||
1568 | switch (wValue >> 8) { | |
1569 | case USB_DT_DEVICE: | |
1570 | ret = min(wLength, | |
1571 | (u16)sizeof(struct usb_device_descriptor)); | |
1572 | memcpy(req->buf, &gs_device_desc, ret); | |
1573 | break; | |
1574 | ||
1575 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
1576 | case USB_DT_DEVICE_QUALIFIER: | |
1577 | if (!gadget->is_dualspeed) | |
1578 | break; | |
1579 | ret = min(wLength, | |
1580 | (u16)sizeof(struct usb_qualifier_descriptor)); | |
1581 | memcpy(req->buf, &gs_qualifier_desc, ret); | |
1582 | break; | |
1583 | ||
1584 | case USB_DT_OTHER_SPEED_CONFIG: | |
1585 | if (!gadget->is_dualspeed) | |
1586 | break; | |
1587 | /* fall through */ | |
1588 | #endif /* CONFIG_USB_GADGET_DUALSPEED */ | |
1589 | case USB_DT_CONFIG: | |
1590 | ret = gs_build_config_buf(req->buf, gadget->speed, | |
1591 | wValue >> 8, wValue & 0xff, | |
1592 | gadget->is_otg); | |
1593 | if (ret >= 0) | |
1594 | ret = min(wLength, (u16)ret); | |
1595 | break; | |
1596 | ||
1597 | case USB_DT_STRING: | |
1598 | /* wIndex == language code. */ | |
1599 | ret = usb_gadget_get_string(&gs_string_table, | |
1600 | wValue & 0xff, req->buf); | |
1601 | if (ret >= 0) | |
1602 | ret = min(wLength, (u16)ret); | |
1603 | break; | |
1604 | } | |
1605 | break; | |
1606 | ||
1607 | case USB_REQ_SET_CONFIGURATION: | |
1608 | if (ctrl->bRequestType != 0) | |
1609 | break; | |
1610 | spin_lock(&dev->dev_lock); | |
1611 | ret = gs_set_config(dev, wValue); | |
1612 | spin_unlock(&dev->dev_lock); | |
1613 | break; | |
1614 | ||
1615 | case USB_REQ_GET_CONFIGURATION: | |
1616 | if (ctrl->bRequestType != USB_DIR_IN) | |
1617 | break; | |
1618 | *(u8 *)req->buf = dev->dev_config; | |
1619 | ret = min(wLength, (u16)1); | |
1620 | break; | |
1621 | ||
1622 | case USB_REQ_SET_INTERFACE: | |
1623 | if (ctrl->bRequestType != USB_RECIP_INTERFACE | |
1624 | || !dev->dev_config | |
1625 | || wIndex >= GS_MAX_NUM_INTERFACES) | |
1626 | break; | |
1627 | if (dev->dev_config == GS_BULK_CONFIG_ID | |
1628 | && wIndex != GS_BULK_INTERFACE_ID) | |
1629 | break; | |
1630 | /* no alternate interface settings */ | |
1631 | if (wValue != 0) | |
1632 | break; | |
1633 | spin_lock(&dev->dev_lock); | |
1634 | /* PXA hardware partially handles SET_INTERFACE; | |
1635 | * we need to kluge around that interference. */ | |
1636 | if (gadget_is_pxa(gadget)) { | |
1637 | ret = gs_set_config(dev, use_acm ? | |
1638 | GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID); | |
1639 | goto set_interface_done; | |
1640 | } | |
1641 | if (dev->dev_config != GS_BULK_CONFIG_ID | |
1642 | && wIndex == GS_CONTROL_INTERFACE_ID) { | |
1643 | if (dev->dev_notify_ep) { | |
1644 | usb_ep_disable(dev->dev_notify_ep); | |
1645 | usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc); | |
1646 | } | |
1647 | } else { | |
1648 | usb_ep_disable(dev->dev_in_ep); | |
1649 | usb_ep_disable(dev->dev_out_ep); | |
1650 | usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc); | |
1651 | usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc); | |
1652 | } | |
1653 | ret = 0; | |
1654 | set_interface_done: | |
1655 | spin_unlock(&dev->dev_lock); | |
1656 | break; | |
1657 | ||
1658 | case USB_REQ_GET_INTERFACE: | |
1659 | if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) | |
1660 | || dev->dev_config == GS_NO_CONFIG_ID) | |
1661 | break; | |
1662 | if (wIndex >= GS_MAX_NUM_INTERFACES | |
1663 | || (dev->dev_config == GS_BULK_CONFIG_ID | |
1664 | && wIndex != GS_BULK_INTERFACE_ID)) { | |
1665 | ret = -EDOM; | |
1666 | break; | |
1667 | } | |
1668 | /* no alternate interface settings */ | |
1669 | *(u8 *)req->buf = 0; | |
1670 | ret = min(wLength, (u16)1); | |
1671 | break; | |
1672 | ||
1673 | default: | |
1674 | printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", | |
1675 | ctrl->bRequestType, ctrl->bRequest, | |
1676 | wValue, wIndex, wLength); | |
1677 | break; | |
1678 | } | |
1679 | ||
1680 | return ret; | |
1681 | } | |
1682 | ||
1683 | static int gs_setup_class(struct usb_gadget *gadget, | |
1684 | const struct usb_ctrlrequest *ctrl) | |
1685 | { | |
1686 | int ret = -EOPNOTSUPP; | |
1687 | struct gs_dev *dev = get_gadget_data(gadget); | |
1688 | struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ | |
1689 | struct usb_request *req = dev->dev_ctrl_req; | |
1bbc1696 DB |
1690 | u16 wIndex = le16_to_cpu(ctrl->wIndex); |
1691 | u16 wValue = le16_to_cpu(ctrl->wValue); | |
1692 | u16 wLength = le16_to_cpu(ctrl->wLength); | |
1da177e4 LT |
1693 | |
1694 | switch (ctrl->bRequest) { | |
1695 | case USB_CDC_REQ_SET_LINE_CODING: | |
1696 | ret = min(wLength, | |
1697 | (u16)sizeof(struct usb_cdc_line_coding)); | |
1698 | if (port) { | |
1699 | spin_lock(&port->port_lock); | |
1700 | memcpy(&port->port_line_coding, req->buf, ret); | |
1701 | spin_unlock(&port->port_lock); | |
1702 | } | |
1703 | break; | |
1704 | ||
1705 | case USB_CDC_REQ_GET_LINE_CODING: | |
1706 | port = dev->dev_port[0]; /* ACM only has one port */ | |
1707 | ret = min(wLength, | |
1708 | (u16)sizeof(struct usb_cdc_line_coding)); | |
1709 | if (port) { | |
1710 | spin_lock(&port->port_lock); | |
1711 | memcpy(req->buf, &port->port_line_coding, ret); | |
1712 | spin_unlock(&port->port_lock); | |
1713 | } | |
1714 | break; | |
1715 | ||
1716 | case USB_CDC_REQ_SET_CONTROL_LINE_STATE: | |
1717 | ret = 0; | |
1718 | break; | |
1719 | ||
1720 | default: | |
1721 | printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", | |
1722 | ctrl->bRequestType, ctrl->bRequest, | |
1723 | wValue, wIndex, wLength); | |
1724 | break; | |
1725 | } | |
1726 | ||
1727 | return ret; | |
1728 | } | |
1729 | ||
1730 | /* | |
1731 | * gs_setup_complete | |
1732 | */ | |
1733 | static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req) | |
1734 | { | |
1735 | if (req->status || req->actual != req->length) { | |
1736 | printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n", | |
1737 | req->status, req->actual, req->length); | |
1738 | } | |
1739 | } | |
1740 | ||
1741 | /* | |
1742 | * gs_disconnect | |
1743 | * | |
1744 | * Called when the device is disconnected. Frees the closed | |
1745 | * ports and disconnects open ports. Open ports will be freed | |
1746 | * on close. Then reallocates the ports for the next connection. | |
1747 | */ | |
1748 | static void gs_disconnect(struct usb_gadget *gadget) | |
1749 | { | |
1750 | unsigned long flags; | |
1751 | struct gs_dev *dev = get_gadget_data(gadget); | |
1752 | ||
1753 | spin_lock_irqsave(&dev->dev_lock, flags); | |
1754 | ||
1755 | gs_reset_config(dev); | |
1756 | ||
1757 | /* free closed ports and disconnect open ports */ | |
1758 | /* (open ports will be freed when closed) */ | |
1759 | gs_free_ports(dev); | |
1760 | ||
1761 | /* re-allocate ports for the next connection */ | |
1762 | if (gs_alloc_ports(dev, GFP_ATOMIC) != 0) | |
1763 | printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n"); | |
1764 | ||
1765 | spin_unlock_irqrestore(&dev->dev_lock, flags); | |
1766 | ||
1767 | printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME); | |
1768 | } | |
1769 | ||
1770 | /* | |
1771 | * gs_set_config | |
1772 | * | |
1773 | * Configures the device by enabling device specific | |
1774 | * optimizations, setting up the endpoints, allocating | |
1775 | * read and write requests and queuing read requests. | |
1776 | * | |
1777 | * The device lock must be held when calling this function. | |
1778 | */ | |
1779 | static int gs_set_config(struct gs_dev *dev, unsigned config) | |
1780 | { | |
1781 | int i; | |
1782 | int ret = 0; | |
1783 | struct usb_gadget *gadget = dev->dev_gadget; | |
1784 | struct usb_ep *ep; | |
1785 | struct usb_endpoint_descriptor *ep_desc; | |
1786 | struct usb_request *req; | |
1787 | struct gs_req_entry *req_entry; | |
1788 | ||
1789 | if (dev == NULL) { | |
1790 | printk(KERN_ERR "gs_set_config: NULL device pointer\n"); | |
1791 | return 0; | |
1792 | } | |
1793 | ||
1794 | if (config == dev->dev_config) | |
1795 | return 0; | |
1796 | ||
1797 | gs_reset_config(dev); | |
1798 | ||
1799 | switch (config) { | |
1800 | case GS_NO_CONFIG_ID: | |
1801 | return 0; | |
1802 | case GS_BULK_CONFIG_ID: | |
1803 | if (use_acm) | |
1804 | return -EINVAL; | |
1805 | /* device specific optimizations */ | |
1806 | if (gadget_is_net2280(gadget)) | |
1807 | net2280_set_fifo_mode(gadget, 1); | |
1808 | break; | |
1809 | case GS_ACM_CONFIG_ID: | |
1810 | if (!use_acm) | |
1811 | return -EINVAL; | |
1812 | /* device specific optimizations */ | |
1813 | if (gadget_is_net2280(gadget)) | |
1814 | net2280_set_fifo_mode(gadget, 1); | |
1815 | break; | |
1816 | default: | |
1817 | return -EINVAL; | |
1818 | } | |
1819 | ||
1820 | dev->dev_config = config; | |
1821 | ||
1822 | gadget_for_each_ep(ep, gadget) { | |
1823 | ||
1824 | if (EP_NOTIFY_NAME | |
1825 | && strcmp(ep->name, EP_NOTIFY_NAME) == 0) { | |
1826 | ep_desc = GS_SPEED_SELECT( | |
1827 | gadget->speed == USB_SPEED_HIGH, | |
1828 | &gs_highspeed_notify_desc, | |
1829 | &gs_fullspeed_notify_desc); | |
1830 | ret = usb_ep_enable(ep,ep_desc); | |
1831 | if (ret == 0) { | |
1832 | ep->driver_data = dev; | |
1833 | dev->dev_notify_ep = ep; | |
1834 | dev->dev_notify_ep_desc = ep_desc; | |
1835 | } else { | |
1836 | printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n", | |
1837 | ep->name, ret); | |
1838 | goto exit_reset_config; | |
1839 | } | |
1840 | } | |
1841 | ||
1842 | else if (strcmp(ep->name, EP_IN_NAME) == 0) { | |
1843 | ep_desc = GS_SPEED_SELECT( | |
1844 | gadget->speed == USB_SPEED_HIGH, | |
1845 | &gs_highspeed_in_desc, | |
1846 | &gs_fullspeed_in_desc); | |
1847 | ret = usb_ep_enable(ep,ep_desc); | |
1848 | if (ret == 0) { | |
1849 | ep->driver_data = dev; | |
1850 | dev->dev_in_ep = ep; | |
1851 | dev->dev_in_ep_desc = ep_desc; | |
1852 | } else { | |
1853 | printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n", | |
1854 | ep->name, ret); | |
1855 | goto exit_reset_config; | |
1856 | } | |
1857 | } | |
1858 | ||
1859 | else if (strcmp(ep->name, EP_OUT_NAME) == 0) { | |
1860 | ep_desc = GS_SPEED_SELECT( | |
1861 | gadget->speed == USB_SPEED_HIGH, | |
1862 | &gs_highspeed_out_desc, | |
1863 | &gs_fullspeed_out_desc); | |
1864 | ret = usb_ep_enable(ep,ep_desc); | |
1865 | if (ret == 0) { | |
1866 | ep->driver_data = dev; | |
1867 | dev->dev_out_ep = ep; | |
1868 | dev->dev_out_ep_desc = ep_desc; | |
1869 | } else { | |
1870 | printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n", | |
1871 | ep->name, ret); | |
1872 | goto exit_reset_config; | |
1873 | } | |
1874 | } | |
1875 | ||
1876 | } | |
1877 | ||
1878 | if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL | |
1879 | || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) { | |
1880 | printk(KERN_ERR "gs_set_config: cannot find endpoints\n"); | |
1881 | ret = -ENODEV; | |
1882 | goto exit_reset_config; | |
1883 | } | |
1884 | ||
1885 | /* allocate and queue read requests */ | |
1886 | ep = dev->dev_out_ep; | |
1887 | for (i=0; i<read_q_size && ret == 0; i++) { | |
1888 | if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) { | |
1889 | req->complete = gs_read_complete; | |
1890 | if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { | |
1891 | printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n", | |
1892 | ret); | |
1893 | } | |
1894 | } else { | |
1895 | printk(KERN_ERR "gs_set_config: cannot allocate read requests\n"); | |
1896 | ret = -ENOMEM; | |
1897 | goto exit_reset_config; | |
1898 | } | |
1899 | } | |
1900 | ||
1901 | /* allocate write requests, and put on free list */ | |
1902 | ep = dev->dev_in_ep; | |
1903 | for (i=0; i<write_q_size; i++) { | |
1904 | if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) { | |
1905 | req_entry->re_req->complete = gs_write_complete; | |
1906 | list_add(&req_entry->re_entry, &dev->dev_req_list); | |
1907 | } else { | |
1908 | printk(KERN_ERR "gs_set_config: cannot allocate write requests\n"); | |
1909 | ret = -ENOMEM; | |
1910 | goto exit_reset_config; | |
1911 | } | |
1912 | } | |
1913 | ||
1914 | printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n", | |
1915 | GS_LONG_NAME, | |
1916 | gadget->speed == USB_SPEED_HIGH ? "high" : "full", | |
1917 | config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM"); | |
1918 | ||
1919 | return 0; | |
1920 | ||
1921 | exit_reset_config: | |
1922 | gs_reset_config(dev); | |
1923 | return ret; | |
1924 | } | |
1925 | ||
1926 | /* | |
1927 | * gs_reset_config | |
1928 | * | |
1929 | * Mark the device as not configured, disable all endpoints, | |
1930 | * which forces completion of pending I/O and frees queued | |
1931 | * requests, and free the remaining write requests on the | |
1932 | * free list. | |
1933 | * | |
1934 | * The device lock must be held when calling this function. | |
1935 | */ | |
1936 | static void gs_reset_config(struct gs_dev *dev) | |
1937 | { | |
1938 | struct gs_req_entry *req_entry; | |
1939 | ||
1940 | if (dev == NULL) { | |
1941 | printk(KERN_ERR "gs_reset_config: NULL device pointer\n"); | |
1942 | return; | |
1943 | } | |
1944 | ||
1945 | if (dev->dev_config == GS_NO_CONFIG_ID) | |
1946 | return; | |
1947 | ||
1948 | dev->dev_config = GS_NO_CONFIG_ID; | |
1949 | ||
1950 | /* free write requests on the free list */ | |
1951 | while(!list_empty(&dev->dev_req_list)) { | |
1952 | req_entry = list_entry(dev->dev_req_list.next, | |
1953 | struct gs_req_entry, re_entry); | |
1954 | list_del(&req_entry->re_entry); | |
1955 | gs_free_req_entry(dev->dev_in_ep, req_entry); | |
1956 | } | |
1957 | ||
1958 | /* disable endpoints, forcing completion of pending i/o; */ | |
1959 | /* completion handlers free their requests in this case */ | |
1960 | if (dev->dev_notify_ep) { | |
1961 | usb_ep_disable(dev->dev_notify_ep); | |
1962 | dev->dev_notify_ep = NULL; | |
1963 | } | |
1964 | if (dev->dev_in_ep) { | |
1965 | usb_ep_disable(dev->dev_in_ep); | |
1966 | dev->dev_in_ep = NULL; | |
1967 | } | |
1968 | if (dev->dev_out_ep) { | |
1969 | usb_ep_disable(dev->dev_out_ep); | |
1970 | dev->dev_out_ep = NULL; | |
1971 | } | |
1972 | } | |
1973 | ||
1974 | /* | |
1975 | * gs_build_config_buf | |
1976 | * | |
1977 | * Builds the config descriptors in the given buffer and returns the | |
1978 | * length, or a negative error number. | |
1979 | */ | |
1980 | static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, | |
1981 | u8 type, unsigned int index, int is_otg) | |
1982 | { | |
1983 | int len; | |
1984 | int high_speed; | |
1985 | const struct usb_config_descriptor *config_desc; | |
1986 | const struct usb_descriptor_header **function; | |
1987 | ||
1988 | if (index >= gs_device_desc.bNumConfigurations) | |
1989 | return -EINVAL; | |
1990 | ||
1991 | /* other speed switches high and full speed */ | |
1992 | high_speed = (speed == USB_SPEED_HIGH); | |
1993 | if (type == USB_DT_OTHER_SPEED_CONFIG) | |
1994 | high_speed = !high_speed; | |
1995 | ||
1996 | if (use_acm) { | |
1997 | config_desc = &gs_acm_config_desc; | |
1998 | function = GS_SPEED_SELECT(high_speed, | |
1999 | gs_acm_highspeed_function, | |
2000 | gs_acm_fullspeed_function); | |
2001 | } else { | |
2002 | config_desc = &gs_bulk_config_desc; | |
2003 | function = GS_SPEED_SELECT(high_speed, | |
2004 | gs_bulk_highspeed_function, | |
2005 | gs_bulk_fullspeed_function); | |
2006 | } | |
2007 | ||
2008 | /* for now, don't advertise srp-only devices */ | |
2009 | if (!is_otg) | |
2010 | function++; | |
2011 | ||
2012 | len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function); | |
2013 | if (len < 0) | |
2014 | return len; | |
2015 | ||
2016 | ((struct usb_config_descriptor *)buf)->bDescriptorType = type; | |
2017 | ||
2018 | return len; | |
2019 | } | |
2020 | ||
2021 | /* | |
2022 | * gs_alloc_req | |
2023 | * | |
2024 | * Allocate a usb_request and its buffer. Returns a pointer to the | |
2025 | * usb_request or NULL if there is an error. | |
2026 | */ | |
1bbc1696 | 2027 | static struct usb_request * |
55016f10 | 2028 | gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags) |
1da177e4 LT |
2029 | { |
2030 | struct usb_request *req; | |
2031 | ||
2032 | if (ep == NULL) | |
2033 | return NULL; | |
2034 | ||
2035 | req = usb_ep_alloc_request(ep, kmalloc_flags); | |
2036 | ||
2037 | if (req != NULL) { | |
2038 | req->length = len; | |
2039 | req->buf = kmalloc(len, kmalloc_flags); | |
2040 | if (req->buf == NULL) { | |
2041 | usb_ep_free_request(ep, req); | |
2042 | return NULL; | |
2043 | } | |
2044 | } | |
2045 | ||
2046 | return req; | |
2047 | } | |
2048 | ||
2049 | /* | |
2050 | * gs_free_req | |
2051 | * | |
2052 | * Free a usb_request and its buffer. | |
2053 | */ | |
2054 | static void gs_free_req(struct usb_ep *ep, struct usb_request *req) | |
2055 | { | |
2056 | if (ep != NULL && req != NULL) { | |
2057 | kfree(req->buf); | |
2058 | usb_ep_free_request(ep, req); | |
2059 | } | |
2060 | } | |
2061 | ||
2062 | /* | |
2063 | * gs_alloc_req_entry | |
2064 | * | |
2065 | * Allocates a request and its buffer, using the given | |
2066 | * endpoint, buffer len, and kmalloc flags. | |
2067 | */ | |
1bbc1696 | 2068 | static struct gs_req_entry * |
55016f10 | 2069 | gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) |
1da177e4 LT |
2070 | { |
2071 | struct gs_req_entry *req; | |
2072 | ||
2073 | req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags); | |
2074 | if (req == NULL) | |
2075 | return NULL; | |
2076 | ||
2077 | req->re_req = gs_alloc_req(ep, len, kmalloc_flags); | |
2078 | if (req->re_req == NULL) { | |
2079 | kfree(req); | |
2080 | return NULL; | |
2081 | } | |
2082 | ||
2083 | req->re_req->context = req; | |
2084 | ||
2085 | return req; | |
2086 | } | |
2087 | ||
2088 | /* | |
2089 | * gs_free_req_entry | |
2090 | * | |
2091 | * Frees a request and its buffer. | |
2092 | */ | |
2093 | static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) | |
2094 | { | |
2095 | if (ep != NULL && req != NULL) { | |
2096 | if (req->re_req != NULL) | |
2097 | gs_free_req(ep, req->re_req); | |
2098 | kfree(req); | |
2099 | } | |
2100 | } | |
2101 | ||
2102 | /* | |
2103 | * gs_alloc_ports | |
2104 | * | |
2105 | * Allocate all ports and set the gs_dev struct to point to them. | |
2106 | * Return 0 if successful, or a negative error number. | |
2107 | * | |
2108 | * The device lock is normally held when calling this function. | |
2109 | */ | |
55016f10 | 2110 | static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags) |
1da177e4 LT |
2111 | { |
2112 | int i; | |
2113 | struct gs_port *port; | |
2114 | ||
2115 | if (dev == NULL) | |
2116 | return -EIO; | |
2117 | ||
2118 | for (i=0; i<GS_NUM_PORTS; i++) { | |
7039f422 | 2119 | if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL) |
1da177e4 LT |
2120 | return -ENOMEM; |
2121 | ||
1da177e4 LT |
2122 | port->port_dev = dev; |
2123 | port->port_num = i; | |
2124 | port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE); | |
2125 | port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT; | |
2126 | port->port_line_coding.bParityType = GS_DEFAULT_PARITY; | |
2127 | port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS; | |
2128 | spin_lock_init(&port->port_lock); | |
2129 | init_waitqueue_head(&port->port_write_wait); | |
2130 | ||
2131 | dev->dev_port[i] = port; | |
2132 | } | |
2133 | ||
2134 | return 0; | |
2135 | } | |
2136 | ||
2137 | /* | |
2138 | * gs_free_ports | |
2139 | * | |
2140 | * Free all closed ports. Open ports are disconnected by | |
2141 | * freeing their write buffers, setting their device pointers | |
2142 | * and the pointers to them in the device to NULL. These | |
2143 | * ports will be freed when closed. | |
2144 | * | |
2145 | * The device lock is normally held when calling this function. | |
2146 | */ | |
2147 | static void gs_free_ports(struct gs_dev *dev) | |
2148 | { | |
2149 | int i; | |
2150 | unsigned long flags; | |
2151 | struct gs_port *port; | |
2152 | ||
2153 | if (dev == NULL) | |
2154 | return; | |
2155 | ||
2156 | for (i=0; i<GS_NUM_PORTS; i++) { | |
2157 | if ((port=dev->dev_port[i]) != NULL) { | |
2158 | dev->dev_port[i] = NULL; | |
2159 | ||
2160 | spin_lock_irqsave(&port->port_lock, flags); | |
2161 | ||
2162 | if (port->port_write_buf != NULL) { | |
2163 | gs_buf_free(port->port_write_buf); | |
2164 | port->port_write_buf = NULL; | |
2165 | } | |
2166 | ||
2167 | if (port->port_open_count > 0 || port->port_in_use) { | |
2168 | port->port_dev = NULL; | |
2169 | wake_up_interruptible(&port->port_write_wait); | |
2170 | if (port->port_tty) { | |
2171 | wake_up_interruptible(&port->port_tty->read_wait); | |
2172 | wake_up_interruptible(&port->port_tty->write_wait); | |
2173 | } | |
2174 | spin_unlock_irqrestore(&port->port_lock, flags); | |
2175 | } else { | |
2176 | spin_unlock_irqrestore(&port->port_lock, flags); | |
2177 | kfree(port); | |
2178 | } | |
2179 | ||
2180 | } | |
2181 | } | |
2182 | } | |
2183 | ||
2184 | /* Circular Buffer */ | |
2185 | ||
2186 | /* | |
2187 | * gs_buf_alloc | |
2188 | * | |
2189 | * Allocate a circular buffer and all associated memory. | |
2190 | */ | |
55016f10 | 2191 | static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags) |
1da177e4 LT |
2192 | { |
2193 | struct gs_buf *gb; | |
2194 | ||
2195 | if (size == 0) | |
2196 | return NULL; | |
2197 | ||
5cbded58 | 2198 | gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags); |
1da177e4 LT |
2199 | if (gb == NULL) |
2200 | return NULL; | |
2201 | ||
2202 | gb->buf_buf = kmalloc(size, kmalloc_flags); | |
2203 | if (gb->buf_buf == NULL) { | |
2204 | kfree(gb); | |
2205 | return NULL; | |
2206 | } | |
2207 | ||
2208 | gb->buf_size = size; | |
2209 | gb->buf_get = gb->buf_put = gb->buf_buf; | |
2210 | ||
2211 | return gb; | |
2212 | } | |
2213 | ||
2214 | /* | |
2215 | * gs_buf_free | |
2216 | * | |
2217 | * Free the buffer and all associated memory. | |
2218 | */ | |
2219 | void gs_buf_free(struct gs_buf *gb) | |
2220 | { | |
1bc3c9e1 JJ |
2221 | if (gb) { |
2222 | kfree(gb->buf_buf); | |
1da177e4 LT |
2223 | kfree(gb); |
2224 | } | |
2225 | } | |
2226 | ||
2227 | /* | |
2228 | * gs_buf_clear | |
2229 | * | |
2230 | * Clear out all data in the circular buffer. | |
2231 | */ | |
2232 | void gs_buf_clear(struct gs_buf *gb) | |
2233 | { | |
2234 | if (gb != NULL) | |
2235 | gb->buf_get = gb->buf_put; | |
2236 | /* equivalent to a get of all data available */ | |
2237 | } | |
2238 | ||
2239 | /* | |
2240 | * gs_buf_data_avail | |
2241 | * | |
2242 | * Return the number of bytes of data available in the circular | |
2243 | * buffer. | |
2244 | */ | |
2245 | unsigned int gs_buf_data_avail(struct gs_buf *gb) | |
2246 | { | |
2247 | if (gb != NULL) | |
2248 | return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; | |
2249 | else | |
2250 | return 0; | |
2251 | } | |
2252 | ||
2253 | /* | |
2254 | * gs_buf_space_avail | |
2255 | * | |
2256 | * Return the number of bytes of space available in the circular | |
2257 | * buffer. | |
2258 | */ | |
2259 | unsigned int gs_buf_space_avail(struct gs_buf *gb) | |
2260 | { | |
2261 | if (gb != NULL) | |
2262 | return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; | |
2263 | else | |
2264 | return 0; | |
2265 | } | |
2266 | ||
2267 | /* | |
2268 | * gs_buf_put | |
2269 | * | |
2270 | * Copy data data from a user buffer and put it into the circular buffer. | |
2271 | * Restrict to the amount of space available. | |
2272 | * | |
2273 | * Return the number of bytes copied. | |
2274 | */ | |
2275 | unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count) | |
2276 | { | |
2277 | unsigned int len; | |
2278 | ||
2279 | if (gb == NULL) | |
2280 | return 0; | |
2281 | ||
2282 | len = gs_buf_space_avail(gb); | |
2283 | if (count > len) | |
2284 | count = len; | |
2285 | ||
2286 | if (count == 0) | |
2287 | return 0; | |
2288 | ||
2289 | len = gb->buf_buf + gb->buf_size - gb->buf_put; | |
2290 | if (count > len) { | |
2291 | memcpy(gb->buf_put, buf, len); | |
2292 | memcpy(gb->buf_buf, buf+len, count - len); | |
2293 | gb->buf_put = gb->buf_buf + count - len; | |
2294 | } else { | |
2295 | memcpy(gb->buf_put, buf, count); | |
2296 | if (count < len) | |
2297 | gb->buf_put += count; | |
2298 | else /* count == len */ | |
2299 | gb->buf_put = gb->buf_buf; | |
2300 | } | |
2301 | ||
2302 | return count; | |
2303 | } | |
2304 | ||
2305 | /* | |
2306 | * gs_buf_get | |
2307 | * | |
2308 | * Get data from the circular buffer and copy to the given buffer. | |
2309 | * Restrict to the amount of data available. | |
2310 | * | |
2311 | * Return the number of bytes copied. | |
2312 | */ | |
2313 | unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count) | |
2314 | { | |
2315 | unsigned int len; | |
2316 | ||
2317 | if (gb == NULL) | |
2318 | return 0; | |
2319 | ||
2320 | len = gs_buf_data_avail(gb); | |
2321 | if (count > len) | |
2322 | count = len; | |
2323 | ||
2324 | if (count == 0) | |
2325 | return 0; | |
2326 | ||
2327 | len = gb->buf_buf + gb->buf_size - gb->buf_get; | |
2328 | if (count > len) { | |
2329 | memcpy(buf, gb->buf_get, len); | |
2330 | memcpy(buf+len, gb->buf_buf, count - len); | |
2331 | gb->buf_get = gb->buf_buf + count - len; | |
2332 | } else { | |
2333 | memcpy(buf, gb->buf_get, count); | |
2334 | if (count < len) | |
2335 | gb->buf_get += count; | |
2336 | else /* count == len */ | |
2337 | gb->buf_get = gb->buf_buf; | |
2338 | } | |
2339 | ||
2340 | return count; | |
2341 | } |