]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blame - drivers/usb/gadget/udc/lpc32xx_udc.c
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[mirror_ubuntu-eoan-kernel.git] / drivers / usb / gadget / udc / lpc32xx_udc.c
CommitLineData
24a28e42
RS
1/*
2 * USB Gadget driver for LPC32xx
3 *
4 * Authors:
5 * Kevin Wells <kevin.wells@nxp.com>
6 * Mike James
7 * Roland Stigge <stigge@antcom.de>
8 *
9 * Copyright (C) 2006 Philips Semiconductors
10 * Copyright (C) 2009 NXP Semiconductors
11 * Copyright (C) 2012 Roland Stigge
12 *
13 * Note: This driver is based on original work done by Mike James for
14 * the LPC3180.
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
29 */
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/platform_device.h>
34#include <linux/delay.h>
35#include <linux/ioport.h>
36#include <linux/slab.h>
37#include <linux/errno.h>
38#include <linux/init.h>
39#include <linux/list.h>
40#include <linux/interrupt.h>
41#include <linux/proc_fs.h>
42#include <linux/clk.h>
43#include <linux/usb/ch9.h>
44#include <linux/usb/gadget.h>
45#include <linux/i2c.h>
46#include <linux/kthread.h>
47#include <linux/freezer.h>
48#include <linux/dma-mapping.h>
49#include <linux/dmapool.h>
50#include <linux/workqueue.h>
51#include <linux/of.h>
52#include <linux/usb/isp1301.h>
53
54#include <asm/byteorder.h>
55#include <mach/hardware.h>
56#include <linux/io.h>
57#include <asm/irq.h>
24a28e42
RS
58
59#include <mach/platform.h>
60#include <mach/irqs.h>
61#include <mach/board.h>
62#ifdef CONFIG_USB_GADGET_DEBUG_FILES
d7dbdb5e 63#include <linux/debugfs.h>
24a28e42
RS
64#include <linux/seq_file.h>
65#endif
66
67/*
68 * USB device configuration structure
69 */
70typedef void (*usc_chg_event)(int);
71struct lpc32xx_usbd_cfg {
72 int vbus_drv_pol; /* 0=active low drive for VBUS via ISP1301 */
73 usc_chg_event conn_chgb; /* Connection change event (optional) */
74 usc_chg_event susp_chgb; /* Suspend/resume event (optional) */
75 usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */
76};
77
78/*
79 * controller driver data structures
80 */
81
82/* 16 endpoints (not to be confused with 32 hardware endpoints) */
83#define NUM_ENDPOINTS 16
84
85/*
86 * IRQ indices make reading the code a little easier
87 */
88#define IRQ_USB_LP 0
89#define IRQ_USB_HP 1
90#define IRQ_USB_DEVDMA 2
91#define IRQ_USB_ATX 3
92
93#define EP_OUT 0 /* RX (from host) */
94#define EP_IN 1 /* TX (to host) */
95
96/* Returns the interrupt mask for the selected hardware endpoint */
97#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir))
98
99#define EP_INT_TYPE 0
100#define EP_ISO_TYPE 1
101#define EP_BLK_TYPE 2
102#define EP_CTL_TYPE 3
103
104/* EP0 states */
105#define WAIT_FOR_SETUP 0 /* Wait for setup packet */
106#define DATA_IN 1 /* Expect dev->host transfer */
107#define DATA_OUT 2 /* Expect host->dev transfer */
108
109/* DD (DMA Descriptor) structure, requires word alignment, this is already
110 * defined in the LPC32XX USB device header file, but this version is slightly
111 * modified to tag some work data with each DMA descriptor. */
112struct lpc32xx_usbd_dd_gad {
113 u32 dd_next_phy;
114 u32 dd_setup;
115 u32 dd_buffer_addr;
116 u32 dd_status;
117 u32 dd_iso_ps_mem_addr;
118 u32 this_dma;
119 u32 iso_status[6]; /* 5 spare */
120 u32 dd_next_v;
121};
122
123/*
124 * Logical endpoint structure
125 */
126struct lpc32xx_ep {
127 struct usb_ep ep;
128 struct list_head queue;
129 struct lpc32xx_udc *udc;
130
131 u32 hwep_num_base; /* Physical hardware EP */
132 u32 hwep_num; /* Maps to hardware endpoint */
133 u32 maxpacket;
134 u32 lep;
135
136 bool is_in;
137 bool req_pending;
138 u32 eptype;
139
140 u32 totalints;
141
142 bool wedge;
24a28e42
RS
143};
144
145/*
146 * Common UDC structure
147 */
148struct lpc32xx_udc {
149 struct usb_gadget gadget;
150 struct usb_gadget_driver *driver;
151 struct platform_device *pdev;
152 struct device *dev;
153 struct dentry *pde;
154 spinlock_t lock;
155 struct i2c_client *isp1301_i2c_client;
156
157 /* Board and device specific */
158 struct lpc32xx_usbd_cfg *board;
159 u32 io_p_start;
160 u32 io_p_size;
161 void __iomem *udp_baseaddr;
162 int udp_irq[4];
163 struct clk *usb_pll_clk;
164 struct clk *usb_slv_clk;
50856699 165 struct clk *usb_otg_clk;
24a28e42
RS
166
167 /* DMA support */
168 u32 *udca_v_base;
169 u32 udca_p_base;
170 struct dma_pool *dd_cache;
171
172 /* Common EP and control data */
173 u32 enabled_devints;
174 u32 enabled_hwepints;
175 u32 dev_status;
176 u32 realized_eps;
177
178 /* VBUS detection, pullup, and power flags */
179 u8 vbus;
180 u8 last_vbus;
181 int pullup;
182 int poweron;
183
184 /* Work queues related to I2C support */
185 struct work_struct pullup_job;
186 struct work_struct vbus_job;
187 struct work_struct power_job;
188
189 /* USB device peripheral - various */
190 struct lpc32xx_ep ep[NUM_ENDPOINTS];
191 bool enabled;
192 bool clocked;
193 bool suspended;
24a28e42
RS
194 int ep0state;
195 atomic_t enabled_ep_cnt;
196 wait_queue_head_t ep_disable_wait_queue;
197};
198
199/*
200 * Endpoint request
201 */
202struct lpc32xx_request {
203 struct usb_request req;
204 struct list_head queue;
205 struct lpc32xx_usbd_dd_gad *dd_desc_ptr;
206 bool mapped;
207 bool send_zlp;
208};
209
210static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
211{
212 return container_of(g, struct lpc32xx_udc, gadget);
213}
214
215#define ep_dbg(epp, fmt, arg...) \
216 dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg)
217#define ep_err(epp, fmt, arg...) \
218 dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg)
219#define ep_info(epp, fmt, arg...) \
220 dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg)
221#define ep_warn(epp, fmt, arg...) \
222 dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg)
223
224#define UDCA_BUFF_SIZE (128)
225
226/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
50856699 227 * be replaced with an inremap()ed pointer
24a28e42
RS
228 * */
229#define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
24a28e42
RS
230
231/* USB_CTRL bit defines */
232#define USB_SLAVE_HCLK_EN (1 << 24)
233#define USB_HOST_NEED_CLK_EN (1 << 21)
234#define USB_DEV_NEED_CLK_EN (1 << 22)
235
24a28e42
RS
236/**********************************************************************
237 * USB device controller register offsets
238 **********************************************************************/
239
240#define USBD_DEVINTST(x) ((x) + 0x200)
241#define USBD_DEVINTEN(x) ((x) + 0x204)
242#define USBD_DEVINTCLR(x) ((x) + 0x208)
243#define USBD_DEVINTSET(x) ((x) + 0x20C)
244#define USBD_CMDCODE(x) ((x) + 0x210)
245#define USBD_CMDDATA(x) ((x) + 0x214)
246#define USBD_RXDATA(x) ((x) + 0x218)
247#define USBD_TXDATA(x) ((x) + 0x21C)
248#define USBD_RXPLEN(x) ((x) + 0x220)
249#define USBD_TXPLEN(x) ((x) + 0x224)
250#define USBD_CTRL(x) ((x) + 0x228)
251#define USBD_DEVINTPRI(x) ((x) + 0x22C)
252#define USBD_EPINTST(x) ((x) + 0x230)
253#define USBD_EPINTEN(x) ((x) + 0x234)
254#define USBD_EPINTCLR(x) ((x) + 0x238)
255#define USBD_EPINTSET(x) ((x) + 0x23C)
256#define USBD_EPINTPRI(x) ((x) + 0x240)
257#define USBD_REEP(x) ((x) + 0x244)
258#define USBD_EPIND(x) ((x) + 0x248)
259#define USBD_EPMAXPSIZE(x) ((x) + 0x24C)
260/* DMA support registers only below */
261/* Set, clear, or get enabled state of the DMA request status. If
262 * enabled, an IN or OUT token will start a DMA transfer for the EP */
263#define USBD_DMARST(x) ((x) + 0x250)
264#define USBD_DMARCLR(x) ((x) + 0x254)
265#define USBD_DMARSET(x) ((x) + 0x258)
266/* DMA UDCA head pointer */
267#define USBD_UDCAH(x) ((x) + 0x280)
268/* EP DMA status, enable, and disable. This is used to specifically
269 * enabled or disable DMA for a specific EP */
270#define USBD_EPDMAST(x) ((x) + 0x284)
271#define USBD_EPDMAEN(x) ((x) + 0x288)
272#define USBD_EPDMADIS(x) ((x) + 0x28C)
273/* DMA master interrupts enable and pending interrupts */
274#define USBD_DMAINTST(x) ((x) + 0x290)
275#define USBD_DMAINTEN(x) ((x) + 0x294)
276/* DMA end of transfer interrupt enable, disable, status */
277#define USBD_EOTINTST(x) ((x) + 0x2A0)
278#define USBD_EOTINTCLR(x) ((x) + 0x2A4)
279#define USBD_EOTINTSET(x) ((x) + 0x2A8)
280/* New DD request interrupt enable, disable, status */
281#define USBD_NDDRTINTST(x) ((x) + 0x2AC)
282#define USBD_NDDRTINTCLR(x) ((x) + 0x2B0)
283#define USBD_NDDRTINTSET(x) ((x) + 0x2B4)
284/* DMA error interrupt enable, disable, status */
285#define USBD_SYSERRTINTST(x) ((x) + 0x2B8)
286#define USBD_SYSERRTINTCLR(x) ((x) + 0x2BC)
287#define USBD_SYSERRTINTSET(x) ((x) + 0x2C0)
288
289/**********************************************************************
290 * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/
291 * USBD_DEVINTPRI register definitions
292 **********************************************************************/
293#define USBD_ERR_INT (1 << 9)
294#define USBD_EP_RLZED (1 << 8)
295#define USBD_TXENDPKT (1 << 7)
296#define USBD_RXENDPKT (1 << 6)
297#define USBD_CDFULL (1 << 5)
298#define USBD_CCEMPTY (1 << 4)
299#define USBD_DEV_STAT (1 << 3)
300#define USBD_EP_SLOW (1 << 2)
301#define USBD_EP_FAST (1 << 1)
302#define USBD_FRAME (1 << 0)
303
304/**********************************************************************
305 * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/
306 * USBD_EPINTPRI register definitions
307 **********************************************************************/
308/* End point selection macro (RX) */
309#define USBD_RX_EP_SEL(e) (1 << ((e) << 1))
310
311/* End point selection macro (TX) */
312#define USBD_TX_EP_SEL(e) (1 << (((e) << 1) + 1))
313
314/**********************************************************************
315 * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/
316 * USBD_EPDMAEN/USBD_EPDMADIS/
317 * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/
318 * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/
319 * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET
320 * register definitions
321 **********************************************************************/
322/* Endpoint selection macro */
323#define USBD_EP_SEL(e) (1 << (e))
324
325/**********************************************************************
326 * SBD_DMAINTST/USBD_DMAINTEN
327 **********************************************************************/
328#define USBD_SYS_ERR_INT (1 << 2)
329#define USBD_NEW_DD_INT (1 << 1)
330#define USBD_EOT_INT (1 << 0)
331
332/**********************************************************************
333 * USBD_RXPLEN register definitions
334 **********************************************************************/
335#define USBD_PKT_RDY (1 << 11)
336#define USBD_DV (1 << 10)
337#define USBD_PK_LEN_MASK 0x3FF
338
339/**********************************************************************
340 * USBD_CTRL register definitions
341 **********************************************************************/
342#define USBD_LOG_ENDPOINT(e) ((e) << 2)
343#define USBD_WR_EN (1 << 1)
344#define USBD_RD_EN (1 << 0)
345
346/**********************************************************************
347 * USBD_CMDCODE register definitions
348 **********************************************************************/
349#define USBD_CMD_CODE(c) ((c) << 16)
350#define USBD_CMD_PHASE(p) ((p) << 8)
351
352/**********************************************************************
353 * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions
354 **********************************************************************/
355#define USBD_DMAEP(e) (1 << (e))
356
357/* DD (DMA Descriptor) structure, requires word alignment */
358struct lpc32xx_usbd_dd {
359 u32 *dd_next;
360 u32 dd_setup;
361 u32 dd_buffer_addr;
362 u32 dd_status;
363 u32 dd_iso_ps_mem_addr;
364};
365
366/* dd_setup bit defines */
367#define DD_SETUP_ATLE_DMA_MODE 0x01
368#define DD_SETUP_NEXT_DD_VALID 0x04
369#define DD_SETUP_ISO_EP 0x10
370#define DD_SETUP_PACKETLEN(n) (((n) & 0x7FF) << 5)
371#define DD_SETUP_DMALENBYTES(n) (((n) & 0xFFFF) << 16)
372
373/* dd_status bit defines */
374#define DD_STATUS_DD_RETIRED 0x01
375#define DD_STATUS_STS_MASK 0x1E
376#define DD_STATUS_STS_NS 0x00 /* Not serviced */
377#define DD_STATUS_STS_BS 0x02 /* Being serviced */
378#define DD_STATUS_STS_NC 0x04 /* Normal completion */
379#define DD_STATUS_STS_DUR 0x06 /* Data underrun (short packet) */
380#define DD_STATUS_STS_DOR 0x08 /* Data overrun */
381#define DD_STATUS_STS_SE 0x12 /* System error */
382#define DD_STATUS_PKT_VAL 0x20 /* Packet valid */
383#define DD_STATUS_LSB_EX 0x40 /* LS byte extracted (ATLE) */
384#define DD_STATUS_MSB_EX 0x80 /* MS byte extracted (ATLE) */
385#define DD_STATUS_MLEN(n) (((n) >> 8) & 0x3F)
386#define DD_STATUS_CURDMACNT(n) (((n) >> 16) & 0xFFFF)
387
388/*
389 *
390 * Protocol engine bits below
391 *
392 */
393/* Device Interrupt Bit Definitions */
394#define FRAME_INT 0x00000001
395#define EP_FAST_INT 0x00000002
396#define EP_SLOW_INT 0x00000004
397#define DEV_STAT_INT 0x00000008
398#define CCEMTY_INT 0x00000010
399#define CDFULL_INT 0x00000020
400#define RxENDPKT_INT 0x00000040
401#define TxENDPKT_INT 0x00000080
402#define EP_RLZED_INT 0x00000100
403#define ERR_INT 0x00000200
404
405/* Rx & Tx Packet Length Definitions */
406#define PKT_LNGTH_MASK 0x000003FF
407#define PKT_DV 0x00000400
408#define PKT_RDY 0x00000800
409
410/* USB Control Definitions */
411#define CTRL_RD_EN 0x00000001
412#define CTRL_WR_EN 0x00000002
413
414/* Command Codes */
415#define CMD_SET_ADDR 0x00D00500
416#define CMD_CFG_DEV 0x00D80500
417#define CMD_SET_MODE 0x00F30500
418#define CMD_RD_FRAME 0x00F50500
419#define DAT_RD_FRAME 0x00F50200
420#define CMD_RD_TEST 0x00FD0500
421#define DAT_RD_TEST 0x00FD0200
422#define CMD_SET_DEV_STAT 0x00FE0500
423#define CMD_GET_DEV_STAT 0x00FE0500
424#define DAT_GET_DEV_STAT 0x00FE0200
425#define CMD_GET_ERR_CODE 0x00FF0500
426#define DAT_GET_ERR_CODE 0x00FF0200
427#define CMD_RD_ERR_STAT 0x00FB0500
428#define DAT_RD_ERR_STAT 0x00FB0200
429#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16))
430#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16))
431#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16))
432#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16))
433#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16))
434#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16))
435#define CMD_CLR_BUF 0x00F20500
436#define DAT_CLR_BUF 0x00F20200
437#define CMD_VALID_BUF 0x00FA0500
438
439/* Device Address Register Definitions */
440#define DEV_ADDR_MASK 0x7F
441#define DEV_EN 0x80
442
443/* Device Configure Register Definitions */
444#define CONF_DVICE 0x01
445
446/* Device Mode Register Definitions */
447#define AP_CLK 0x01
448#define INAK_CI 0x02
449#define INAK_CO 0x04
450#define INAK_II 0x08
451#define INAK_IO 0x10
452#define INAK_BI 0x20
453#define INAK_BO 0x40
454
455/* Device Status Register Definitions */
456#define DEV_CON 0x01
457#define DEV_CON_CH 0x02
458#define DEV_SUS 0x04
459#define DEV_SUS_CH 0x08
460#define DEV_RST 0x10
461
462/* Error Code Register Definitions */
463#define ERR_EC_MASK 0x0F
464#define ERR_EA 0x10
465
466/* Error Status Register Definitions */
467#define ERR_PID 0x01
468#define ERR_UEPKT 0x02
469#define ERR_DCRC 0x04
470#define ERR_TIMOUT 0x08
471#define ERR_EOP 0x10
472#define ERR_B_OVRN 0x20
473#define ERR_BTSTF 0x40
474#define ERR_TGL 0x80
475
476/* Endpoint Select Register Definitions */
477#define EP_SEL_F 0x01
478#define EP_SEL_ST 0x02
479#define EP_SEL_STP 0x04
480#define EP_SEL_PO 0x08
481#define EP_SEL_EPN 0x10
482#define EP_SEL_B_1_FULL 0x20
483#define EP_SEL_B_2_FULL 0x40
484
485/* Endpoint Status Register Definitions */
486#define EP_STAT_ST 0x01
487#define EP_STAT_DA 0x20
488#define EP_STAT_RF_MO 0x40
489#define EP_STAT_CND_ST 0x80
490
491/* Clear Buffer Register Definitions */
492#define CLR_BUF_PO 0x01
493
494/* DMA Interrupt Bit Definitions */
495#define EOT_INT 0x01
496#define NDD_REQ_INT 0x02
497#define SYS_ERR_INT 0x04
498
499#define DRIVER_VERSION "1.03"
500static const char driver_name[] = "lpc32xx_udc";
501
502/*
503 *
504 * proc interface support
505 *
506 */
507#ifdef CONFIG_USB_GADGET_DEBUG_FILES
508static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"};
509static const char debug_filename[] = "driver/udc";
510
511static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep)
512{
513 struct lpc32xx_request *req;
514
515 seq_printf(s, "\n");
516 seq_printf(s, "%12s, maxpacket %4d %3s",
517 ep->ep.name, ep->ep.maxpacket,
518 ep->is_in ? "in" : "out");
519 seq_printf(s, " type %4s", epnames[ep->eptype]);
520 seq_printf(s, " ints: %12d", ep->totalints);
521
522 if (list_empty(&ep->queue))
523 seq_printf(s, "\t(queue empty)\n");
524 else {
525 list_for_each_entry(req, &ep->queue, queue) {
526 u32 length = req->req.actual;
527
528 seq_printf(s, "\treq %p len %d/%d buf %p\n",
529 &req->req, length,
530 req->req.length, req->req.buf);
531 }
532 }
533}
534
535static int proc_udc_show(struct seq_file *s, void *unused)
536{
537 struct lpc32xx_udc *udc = s->private;
538 struct lpc32xx_ep *ep;
539 unsigned long flags;
540
541 seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION);
542
543 spin_lock_irqsave(&udc->lock, flags);
544
545 seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n",
546 udc->vbus ? "present" : "off",
547 udc->enabled ? (udc->vbus ? "active" : "enabled") :
548 "disabled",
d60d9392 549 udc->gadget.is_selfpowered ? "self" : "VBUS",
24a28e42
RS
550 udc->suspended ? ", suspended" : "",
551 udc->driver ? udc->driver->driver.name : "(none)");
552
553 if (udc->enabled && udc->vbus) {
554 proc_ep_show(s, &udc->ep[0]);
78ca9139
RS
555 list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
556 proc_ep_show(s, ep);
24a28e42
RS
557 }
558
559 spin_unlock_irqrestore(&udc->lock, flags);
560
561 return 0;
562}
563
564static int proc_udc_open(struct inode *inode, struct file *file)
565{
d9dda78b 566 return single_open(file, proc_udc_show, PDE_DATA(inode));
24a28e42
RS
567}
568
569static const struct file_operations proc_ops = {
570 .owner = THIS_MODULE,
571 .open = proc_udc_open,
572 .read = seq_read,
573 .llseek = seq_lseek,
574 .release = single_release,
575};
576
577static void create_debug_file(struct lpc32xx_udc *udc)
578{
579 udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops);
580}
581
582static void remove_debug_file(struct lpc32xx_udc *udc)
583{
23fba80a 584 debugfs_remove(udc->pde);
24a28e42
RS
585}
586
587#else
588static inline void create_debug_file(struct lpc32xx_udc *udc) {}
589static inline void remove_debug_file(struct lpc32xx_udc *udc) {}
590#endif
591
592/* Primary initialization sequence for the ISP1301 transceiver */
593static void isp1301_udc_configure(struct lpc32xx_udc *udc)
594{
595 /* LPC32XX only supports DAT_SE0 USB mode */
596 /* This sequence is important */
597
598 /* Disable transparent UART mode first */
599 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
600 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
601 MC1_UART_EN);
602
603 /* Set full speed and SE0 mode */
604 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
605 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
606 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
607 ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0));
608
609 /*
610 * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide
611 */
612 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
613 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
614 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
615 ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL));
616
617 /* Driver VBUS_DRV high or low depending on board setup */
618 if (udc->board->vbus_drv_pol != 0)
619 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
620 ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
621 else
622 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
623 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
624 OTG1_VBUS_DRV);
625
626 /* Bi-directional mode with suspend control
627 * Enable both pulldowns for now - the pullup will be enable when VBUS
628 * is detected */
629 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
630 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
631 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
632 ISP1301_I2C_OTG_CONTROL_1,
633 (0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
634
635 /* Discharge VBUS (just in case) */
636 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
637 ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
638 msleep(1);
639 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
640 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
641 OTG1_VBUS_DISCHRG);
642
643 /* Clear and enable VBUS high edge interrupt */
644 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
645 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
646 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
647 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
648 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
649 ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD);
650 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
651 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
652 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
653 ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
654
655 /* Enable usb_need_clk clock after transceiver is initialized */
50856699 656 writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL);
24a28e42
RS
657
658 dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n",
659 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
660 dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n",
661 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02));
662 dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n",
663 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14));
664}
665
666/* Enables or disables the USB device pullup via the ISP1301 transceiver */
667static void isp1301_pullup_set(struct lpc32xx_udc *udc)
668{
669 if (udc->pullup)
670 /* Enable pullup for bus signalling */
671 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
672 ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP);
673 else
674 /* Enable pullup for bus signalling */
675 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
676 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
677 OTG1_DP_PULLUP);
678}
679
680static void pullup_work(struct work_struct *work)
681{
682 struct lpc32xx_udc *udc =
683 container_of(work, struct lpc32xx_udc, pullup_job);
684
685 isp1301_pullup_set(udc);
686}
687
688static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup,
689 int block)
690{
691 if (en_pullup == udc->pullup)
692 return;
693
694 udc->pullup = en_pullup;
695 if (block)
696 isp1301_pullup_set(udc);
697 else
698 /* defer slow i2c pull up setting */
699 schedule_work(&udc->pullup_job);
700}
701
702#ifdef CONFIG_PM
703/* Powers up or down the ISP1301 transceiver */
704static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable)
705{
706 if (enable != 0)
707 /* Power up ISP1301 - this ISP1301 will automatically wakeup
708 when VBUS is detected */
709 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
710 ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
711 MC2_GLOBAL_PWR_DN);
712 else
713 /* Power down ISP1301 */
714 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
715 ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
716}
717
718static void power_work(struct work_struct *work)
719{
720 struct lpc32xx_udc *udc =
721 container_of(work, struct lpc32xx_udc, power_job);
722
723 isp1301_set_powerstate(udc, udc->poweron);
724}
725#endif
726
727/*
728 *
729 * USB protocol engine command/data read/write helper functions
730 *
731 */
732/* Issues a single command to the USB device state machine */
733static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd)
734{
735 u32 pass = 0;
736 int to;
737
738 /* EP may lock on CLRI if this read isn't done */
739 u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
740 (void) tmp;
741
742 while (pass == 0) {
743 writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr));
744
745 /* Write command code */
746 writel(cmd, USBD_CMDCODE(udc->udp_baseaddr));
747 to = 10000;
748 while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) &
749 USBD_CCEMPTY) == 0) && (to > 0)) {
750 to--;
751 }
752
753 if (to > 0)
754 pass = 1;
755
756 cpu_relax();
757 }
758}
759
760/* Issues 2 commands (or command and data) to the USB device state machine */
761static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
762 u32 data)
763{
764 udc_protocol_cmd_w(udc, cmd);
765 udc_protocol_cmd_w(udc, data);
766}
767
768/* Issues a single command to the USB device state machine and reads
769 * response data */
770static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
771{
772 u32 tmp;
773 int to = 1000;
774
775 /* Write a command and read data from the protocol engine */
776 writel((USBD_CDFULL | USBD_CCEMPTY),
777 USBD_DEVINTCLR(udc->udp_baseaddr));
778
779 /* Write command code */
780 udc_protocol_cmd_w(udc, cmd);
781
782 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
783 while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
784 && (to > 0))
785 to--;
786 if (!to)
787 dev_dbg(udc->dev,
788 "Protocol engine didn't receive response (CDFULL)\n");
789
790 return readl(USBD_CMDDATA(udc->udp_baseaddr));
791}
792
793/*
794 *
795 * USB device interrupt mask support functions
796 *
797 */
798/* Enable one or more USB device interrupts */
799static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask)
800{
801 udc->enabled_devints |= devmask;
802 writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
803}
804
805/* Disable one or more USB device interrupts */
806static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask)
807{
808 udc->enabled_devints &= ~mask;
809 writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
810}
811
812/* Clear one or more USB device interrupts */
813static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask)
814{
815 writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr));
816}
817
818/*
819 *
820 * Endpoint interrupt disable/enable functions
821 *
822 */
823/* Enable one or more USB endpoint interrupts */
824static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
825{
826 udc->enabled_hwepints |= (1 << hwep);
827 writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
828}
829
830/* Disable one or more USB endpoint interrupts */
831static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
832{
833 udc->enabled_hwepints &= ~(1 << hwep);
834 writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
835}
836
837/* Clear one or more USB endpoint interrupts */
838static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep)
839{
840 writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr));
841}
842
843/* Enable DMA for the HW channel */
844static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep)
845{
846 writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr));
847}
848
849/* Disable DMA for the HW channel */
850static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep)
851{
852 writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr));
853}
854
855/*
856 *
857 * Endpoint realize/unrealize functions
858 *
859 */
860/* Before an endpoint can be used, it needs to be realized
861 * in the USB protocol engine - this realizes the endpoint.
862 * The interrupt (FIFO or DMA) is not enabled with this function */
863static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep,
864 u32 maxpacket)
865{
866 int to = 1000;
867
868 writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
869 writel(hwep, USBD_EPIND(udc->udp_baseaddr));
870 udc->realized_eps |= (1 << hwep);
871 writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
872 writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr));
873
874 /* Wait until endpoint is realized in hardware */
875 while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) &
876 USBD_EP_RLZED)) && (to > 0))
877 to--;
878 if (!to)
879 dev_dbg(udc->dev, "EP not correctly realized in hardware\n");
880
881 writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
882}
883
884/* Unrealize an EP */
885static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep)
886{
887 udc->realized_eps &= ~(1 << hwep);
888 writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
889}
890
891/*
892 *
893 * Endpoint support functions
894 *
895 */
896/* Select and clear endpoint interrupt */
897static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep)
898{
899 udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep));
900 return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep));
901}
902
903/* Disables the endpoint in the USB protocol engine */
904static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep)
905{
906 udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
907 DAT_WR_BYTE(EP_STAT_DA));
908}
909
910/* Stalls the endpoint - endpoint will return STALL */
911static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep)
912{
913 udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
914 DAT_WR_BYTE(EP_STAT_ST));
915}
916
917/* Clear stall or reset endpoint */
918static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep)
919{
920 udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
921 DAT_WR_BYTE(0));
922}
923
924/* Select an endpoint for endpoint status, clear, validate */
925static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep)
926{
927 udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep));
928}
929
930/*
931 *
932 * Endpoint buffer management functions
933 *
934 */
935/* Clear the current endpoint's buffer */
936static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
937{
938 udc_select_hwep(udc, hwep);
939 udc_protocol_cmd_w(udc, CMD_CLR_BUF);
940}
941
942/* Validate the current endpoint's buffer */
943static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
944{
945 udc_select_hwep(udc, hwep);
946 udc_protocol_cmd_w(udc, CMD_VALID_BUF);
947}
948
949static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep)
950{
951 /* Clear EP interrupt */
952 uda_clear_hwepint(udc, hwep);
953 return udc_selep_clrint(udc, hwep);
954}
955
956/*
957 *
958 * USB EP DMA support
959 *
960 */
961/* Allocate a DMA Descriptor */
962static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
963{
964 dma_addr_t dma;
965 struct lpc32xx_usbd_dd_gad *dd;
966
967 dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
968 udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
969 if (dd)
970 dd->this_dma = dma;
971
972 return dd;
973}
974
975/* Free a DMA Descriptor */
976static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
977{
978 dma_pool_free(udc->dd_cache, dd, dd->this_dma);
979}
980
981/*
982 *
983 * USB setup and shutdown functions
984 *
985 */
986/* Enables or disables most of the USB system clocks when low power mode is
987 * needed. Clocks are typically started on a connection event, and disabled
988 * when a cable is disconnected */
24a28e42
RS
989static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
990{
24a28e42
RS
991 if (enable != 0) {
992 if (udc->clocked)
993 return;
994
995 udc->clocked = 1;
996
997 /* 48MHz PLL up */
998 clk_enable(udc->usb_pll_clk);
999
1000 /* Enable the USB device clock */
1001 writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
1002 USB_CTRL);
1003
50856699 1004 clk_enable(udc->usb_otg_clk);
24a28e42
RS
1005 } else {
1006 if (!udc->clocked)
1007 return;
1008
1009 udc->clocked = 0;
1010
1011 /* Never disable the USB_HCLK during normal operation */
1012
1013 /* 48MHz PLL dpwn */
1014 clk_disable(udc->usb_pll_clk);
1015
50856699 1016 /* Disable the USB device clock */
24a28e42
RS
1017 writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
1018 USB_CTRL);
1019
50856699 1020 clk_disable(udc->usb_otg_clk);
24a28e42
RS
1021 }
1022}
1023
1024/* Set/reset USB device address */
1025static void udc_set_address(struct lpc32xx_udc *udc, u32 addr)
1026{
1027 /* Address will be latched at the end of the status phase, or
1028 latched immediately if function is called twice */
1029 udc_protocol_cmd_data_w(udc, CMD_SET_ADDR,
1030 DAT_WR_BYTE(DEV_EN | addr));
1031}
1032
1033/* Setup up a IN request for DMA transfer - this consists of determining the
1034 * list of DMA addresses for the transfer, allocating DMA Descriptors,
1035 * installing the DD into the UDCA, and then enabling the DMA for that EP */
1036static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
1037{
1038 struct lpc32xx_request *req;
1039 u32 hwep = ep->hwep_num;
1040
1041 ep->req_pending = 1;
1042
1043 /* There will always be a request waiting here */
1044 req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
1045
1046 /* Place the DD Descriptor into the UDCA */
1047 udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
1048
1049 /* Enable DMA and interrupt for the HW EP */
1050 udc_ep_dma_enable(udc, hwep);
1051
1052 /* Clear ZLP if last packet is not of MAXP size */
1053 if (req->req.length % ep->ep.maxpacket)
1054 req->send_zlp = 0;
1055
1056 return 0;
1057}
1058
1059/* Setup up a OUT request for DMA transfer - this consists of determining the
1060 * list of DMA addresses for the transfer, allocating DMA Descriptors,
1061 * installing the DD into the UDCA, and then enabling the DMA for that EP */
1062static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
1063{
1064 struct lpc32xx_request *req;
1065 u32 hwep = ep->hwep_num;
1066
1067 ep->req_pending = 1;
1068
1069 /* There will always be a request waiting here */
1070 req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
1071
1072 /* Place the DD Descriptor into the UDCA */
1073 udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
1074
1075 /* Enable DMA and interrupt for the HW EP */
1076 udc_ep_dma_enable(udc, hwep);
1077 return 0;
1078}
1079
1080static void udc_disable(struct lpc32xx_udc *udc)
1081{
1082 u32 i;
1083
1084 /* Disable device */
1085 udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
1086 udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0));
1087
1088 /* Disable all device interrupts (including EP0) */
1089 uda_disable_devint(udc, 0x3FF);
1090
1091 /* Disable and reset all endpoint interrupts */
1092 for (i = 0; i < 32; i++) {
1093 uda_disable_hwepint(udc, i);
1094 uda_clear_hwepint(udc, i);
1095 udc_disable_hwep(udc, i);
1096 udc_unrealize_hwep(udc, i);
1097 udc->udca_v_base[i] = 0;
1098
1099 /* Disable and clear all interrupts and DMA */
1100 udc_ep_dma_disable(udc, i);
1101 writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr));
1102 writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr));
1103 writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr));
1104 writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr));
1105 }
1106
1107 /* Disable DMA interrupts */
1108 writel(0, USBD_DMAINTEN(udc->udp_baseaddr));
1109
1110 writel(0, USBD_UDCAH(udc->udp_baseaddr));
1111}
1112
1113static void udc_enable(struct lpc32xx_udc *udc)
1114{
1115 u32 i;
1116 struct lpc32xx_ep *ep = &udc->ep[0];
1117
1118 /* Start with known state */
1119 udc_disable(udc);
1120
1121 /* Enable device */
1122 udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON));
1123
1124 /* EP interrupts on high priority, FRAME interrupt on low priority */
1125 writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr));
1126 writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr));
1127
1128 /* Clear any pending device interrupts */
1129 writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr));
1130
1131 /* Setup UDCA - not yet used (DMA) */
1132 writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr));
1133
1134 /* Only enable EP0 in and out for now, EP0 only works in FIFO mode */
1135 for (i = 0; i <= 1; i++) {
1136 udc_realize_hwep(udc, i, ep->ep.maxpacket);
1137 uda_enable_hwepint(udc, i);
1138 udc_select_hwep(udc, i);
1139 udc_clrstall_hwep(udc, i);
1140 udc_clr_buffer_hwep(udc, i);
1141 }
1142
1143 /* Device interrupt setup */
1144 uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
1145 USBD_EP_FAST));
1146 uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
1147 USBD_EP_FAST));
1148
1149 /* Set device address to 0 - called twice to force a latch in the USB
1150 engine without the need of a setup packet status closure */
1151 udc_set_address(udc, 0);
1152 udc_set_address(udc, 0);
1153
1154 /* Enable master DMA interrupts */
1155 writel((USBD_SYS_ERR_INT | USBD_EOT_INT),
1156 USBD_DMAINTEN(udc->udp_baseaddr));
1157
1158 udc->dev_status = 0;
1159}
1160
1161/*
1162 *
1163 * USB device board specific events handled via callbacks
1164 *
1165 */
1166/* Connection change event - notify board function of change */
1167static void uda_power_event(struct lpc32xx_udc *udc, u32 conn)
1168{
1169 /* Just notify of a connection change event (optional) */
1170 if (udc->board->conn_chgb != NULL)
1171 udc->board->conn_chgb(conn);
1172}
1173
1174/* Suspend/resume event - notify board function of change */
1175static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn)
1176{
1177 /* Just notify of a Suspend/resume change event (optional) */
1178 if (udc->board->susp_chgb != NULL)
1179 udc->board->susp_chgb(conn);
1180
1181 if (conn)
1182 udc->suspended = 0;
1183 else
1184 udc->suspended = 1;
1185}
1186
1187/* Remote wakeup enable/disable - notify board function of change */
1188static void uda_remwkp_cgh(struct lpc32xx_udc *udc)
1189{
1190 if (udc->board->rmwk_chgb != NULL)
1191 udc->board->rmwk_chgb(udc->dev_status &
1192 (1 << USB_DEVICE_REMOTE_WAKEUP));
1193}
1194
1195/* Reads data from FIFO, adjusts for alignment and data size */
1196static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
1197{
1198 int n, i, bl;
1199 u16 *p16;
1200 u32 *p32, tmp, cbytes;
1201
1202 /* Use optimal data transfer method based on source address and size */
1203 switch (((u32) data) & 0x3) {
1204 case 0: /* 32-bit aligned */
1205 p32 = (u32 *) data;
1206 cbytes = (bytes & ~0x3);
1207
1208 /* Copy 32-bit aligned data first */
1209 for (n = 0; n < cbytes; n += 4)
1210 *p32++ = readl(USBD_RXDATA(udc->udp_baseaddr));
1211
1212 /* Handle any remaining bytes */
1213 bl = bytes - cbytes;
1214 if (bl) {
1215 tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
1216 for (n = 0; n < bl; n++)
1217 data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
1218
1219 }
1220 break;
1221
1222 case 1: /* 8-bit aligned */
1223 case 3:
1224 /* Each byte has to be handled independently */
1225 for (n = 0; n < bytes; n += 4) {
1226 tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
1227
1228 bl = bytes - n;
1229 if (bl > 3)
1230 bl = 3;
1231
1232 for (i = 0; i < bl; i++)
1233 data[n + i] = (u8) ((tmp >> (n * 8)) & 0xFF);
1234 }
1235 break;
1236
1237 case 2: /* 16-bit aligned */
1238 p16 = (u16 *) data;
1239 cbytes = (bytes & ~0x3);
1240
1241 /* Copy 32-bit sized objects first with 16-bit alignment */
1242 for (n = 0; n < cbytes; n += 4) {
1243 tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
1244 *p16++ = (u16)(tmp & 0xFFFF);
1245 *p16++ = (u16)((tmp >> 16) & 0xFFFF);
1246 }
1247
1248 /* Handle any remaining bytes */
1249 bl = bytes - cbytes;
1250 if (bl) {
1251 tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
1252 for (n = 0; n < bl; n++)
1253 data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
1254 }
1255 break;
1256 }
1257}
1258
1259/* Read data from the FIFO for an endpoint. This function is for endpoints (such
1260 * as EP0) that don't use DMA. This function should only be called if a packet
1261 * is known to be ready to read for the endpoint. Note that the endpoint must
1262 * be selected in the protocol engine prior to this call. */
1263static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
1264 u32 bytes)
1265{
1266 u32 tmpv;
1267 int to = 1000;
1268 u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN;
1269
1270 /* Setup read of endpoint */
1271 writel(hwrep, USBD_CTRL(udc->udp_baseaddr));
1272
1273 /* Wait until packet is ready */
1274 while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) &
1275 PKT_RDY) == 0) && (to > 0))
1276 to--;
1277 if (!to)
1278 dev_dbg(udc->dev, "No packet ready on FIFO EP read\n");
1279
1280 /* Mask out count */
1281 tmp = tmpv & PKT_LNGTH_MASK;
1282 if (bytes < tmp)
1283 tmp = bytes;
1284
1285 if ((tmp > 0) && (data != NULL))
1286 udc_pop_fifo(udc, (u8 *) data, tmp);
1287
1288 writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
1289
1290 /* Clear the buffer */
1291 udc_clr_buffer_hwep(udc, hwep);
1292
1293 return tmp;
1294}
1295
1296/* Stuffs data into the FIFO, adjusts for alignment and data size */
1297static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
1298{
1299 int n, i, bl;
1300 u16 *p16;
1301 u32 *p32, tmp, cbytes;
1302
1303 /* Use optimal data transfer method based on source address and size */
1304 switch (((u32) data) & 0x3) {
1305 case 0: /* 32-bit aligned */
1306 p32 = (u32 *) data;
1307 cbytes = (bytes & ~0x3);
1308
1309 /* Copy 32-bit aligned data first */
1310 for (n = 0; n < cbytes; n += 4)
1311 writel(*p32++, USBD_TXDATA(udc->udp_baseaddr));
1312
1313 /* Handle any remaining bytes */
1314 bl = bytes - cbytes;
1315 if (bl) {
1316 tmp = 0;
1317 for (n = 0; n < bl; n++)
1318 tmp |= data[cbytes + n] << (n * 8);
1319
1320 writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
1321 }
1322 break;
1323
1324 case 1: /* 8-bit aligned */
1325 case 3:
1326 /* Each byte has to be handled independently */
1327 for (n = 0; n < bytes; n += 4) {
1328 bl = bytes - n;
1329 if (bl > 4)
1330 bl = 4;
1331
1332 tmp = 0;
1333 for (i = 0; i < bl; i++)
1334 tmp |= data[n + i] << (i * 8);
1335
1336 writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
1337 }
1338 break;
1339
1340 case 2: /* 16-bit aligned */
1341 p16 = (u16 *) data;
1342 cbytes = (bytes & ~0x3);
1343
1344 /* Copy 32-bit aligned data first */
1345 for (n = 0; n < cbytes; n += 4) {
1346 tmp = *p16++ & 0xFFFF;
1347 tmp |= (*p16++ & 0xFFFF) << 16;
1348 writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
1349 }
1350
1351 /* Handle any remaining bytes */
1352 bl = bytes - cbytes;
1353 if (bl) {
1354 tmp = 0;
1355 for (n = 0; n < bl; n++)
1356 tmp |= data[cbytes + n] << (n * 8);
1357
1358 writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
1359 }
1360 break;
1361 }
1362}
1363
1364/* Write data to the FIFO for an endpoint. This function is for endpoints (such
1365 * as EP0) that don't use DMA. Note that the endpoint must be selected in the
1366 * protocol engine prior to this call. */
1367static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
1368 u32 bytes)
1369{
1370 u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN;
1371
1372 if ((bytes > 0) && (data == NULL))
1373 return;
1374
1375 /* Setup write of endpoint */
1376 writel(hwwep, USBD_CTRL(udc->udp_baseaddr));
1377
1378 writel(bytes, USBD_TXPLEN(udc->udp_baseaddr));
1379
1380 /* Need at least 1 byte to trigger TX */
1381 if (bytes == 0)
1382 writel(0, USBD_TXDATA(udc->udp_baseaddr));
1383 else
1384 udc_stuff_fifo(udc, (u8 *) data, bytes);
1385
1386 writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
1387
1388 udc_val_buffer_hwep(udc, hwep);
1389}
1390
1391/* USB device reset - resets USB to a default state with just EP0
1392 enabled */
1393static void uda_usb_reset(struct lpc32xx_udc *udc)
1394{
1395 u32 i = 0;
1396 /* Re-init device controller and EP0 */
1397 udc_enable(udc);
1398 udc->gadget.speed = USB_SPEED_FULL;
1399
1400 for (i = 1; i < NUM_ENDPOINTS; i++) {
1401 struct lpc32xx_ep *ep = &udc->ep[i];
1402 ep->req_pending = 0;
1403 }
1404}
1405
1406/* Send a ZLP on EP0 */
1407static void udc_ep0_send_zlp(struct lpc32xx_udc *udc)
1408{
1409 udc_write_hwep(udc, EP_IN, NULL, 0);
1410}
1411
1412/* Get current frame number */
1413static u16 udc_get_current_frame(struct lpc32xx_udc *udc)
1414{
1415 u16 flo, fhi;
1416
1417 udc_protocol_cmd_w(udc, CMD_RD_FRAME);
1418 flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
1419 fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
1420
1421 return (fhi << 8) | flo;
1422}
1423
1424/* Set the device as configured - enables all endpoints */
1425static inline void udc_set_device_configured(struct lpc32xx_udc *udc)
1426{
1427 udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE));
1428}
1429
1430/* Set the device as unconfigured - disables all endpoints */
1431static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc)
1432{
1433 udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
1434}
1435
1436/* reinit == restore initial software state */
1437static void udc_reinit(struct lpc32xx_udc *udc)
1438{
1439 u32 i;
1440
1441 INIT_LIST_HEAD(&udc->gadget.ep_list);
1442 INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
1443
1444 for (i = 0; i < NUM_ENDPOINTS; i++) {
1445 struct lpc32xx_ep *ep = &udc->ep[i];
1446
1447 if (i != 0)
1448 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
e117e742 1449 usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
24a28e42
RS
1450 INIT_LIST_HEAD(&ep->queue);
1451 ep->req_pending = 0;
1452 }
1453
1454 udc->ep0state = WAIT_FOR_SETUP;
1455}
1456
1457/* Must be called with lock */
1458static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status)
1459{
1460 struct lpc32xx_udc *udc = ep->udc;
1461
1462 list_del_init(&req->queue);
1463 if (req->req.status == -EINPROGRESS)
1464 req->req.status = status;
1465 else
1466 status = req->req.status;
1467
1468 if (ep->lep) {
369ac9cb 1469 usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
24a28e42
RS
1470
1471 /* Free DDs */
1472 udc_dd_free(udc, req->dd_desc_ptr);
1473 }
1474
1475 if (status && status != -ESHUTDOWN)
1476 ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status);
1477
1478 ep->req_pending = 0;
1479 spin_unlock(&udc->lock);
304f7e5e 1480 usb_gadget_giveback_request(&ep->ep, &req->req);
24a28e42
RS
1481 spin_lock(&udc->lock);
1482}
1483
1484/* Must be called with lock */
1485static void nuke(struct lpc32xx_ep *ep, int status)
1486{
1487 struct lpc32xx_request *req;
1488
1489 while (!list_empty(&ep->queue)) {
1490 req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
1491 done(ep, req, status);
1492 }
1493
78ca9139 1494 if (status == -ESHUTDOWN) {
24a28e42
RS
1495 uda_disable_hwepint(ep->udc, ep->hwep_num);
1496 udc_disable_hwep(ep->udc, ep->hwep_num);
1497 }
1498}
1499
1500/* IN endpoint 0 transfer */
1501static int udc_ep0_in_req(struct lpc32xx_udc *udc)
1502{
1503 struct lpc32xx_request *req;
1504 struct lpc32xx_ep *ep0 = &udc->ep[0];
1505 u32 tsend, ts = 0;
1506
1507 if (list_empty(&ep0->queue))
1508 /* Nothing to send */
1509 return 0;
1510 else
1511 req = list_entry(ep0->queue.next, struct lpc32xx_request,
1512 queue);
1513
1514 tsend = ts = req->req.length - req->req.actual;
1515 if (ts == 0) {
1516 /* Send a ZLP */
1517 udc_ep0_send_zlp(udc);
1518 done(ep0, req, 0);
1519 return 1;
1520 } else if (ts > ep0->ep.maxpacket)
1521 ts = ep0->ep.maxpacket; /* Just send what we can */
1522
1523 /* Write data to the EP0 FIFO and start transfer */
1524 udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts);
1525
1526 /* Increment data pointer */
1527 req->req.actual += ts;
1528
1529 if (tsend >= ep0->ep.maxpacket)
1530 return 0; /* Stay in data transfer state */
1531
1532 /* Transfer request is complete */
1533 udc->ep0state = WAIT_FOR_SETUP;
1534 done(ep0, req, 0);
1535 return 1;
1536}
1537
1538/* OUT endpoint 0 transfer */
1539static int udc_ep0_out_req(struct lpc32xx_udc *udc)
1540{
1541 struct lpc32xx_request *req;
1542 struct lpc32xx_ep *ep0 = &udc->ep[0];
1543 u32 tr, bufferspace;
1544
1545 if (list_empty(&ep0->queue))
1546 return 0;
1547 else
1548 req = list_entry(ep0->queue.next, struct lpc32xx_request,
1549 queue);
1550
1551 if (req) {
1552 if (req->req.length == 0) {
1553 /* Just dequeue request */
1554 done(ep0, req, 0);
1555 udc->ep0state = WAIT_FOR_SETUP;
1556 return 1;
1557 }
1558
1559 /* Get data from FIFO */
1560 bufferspace = req->req.length - req->req.actual;
1561 if (bufferspace > ep0->ep.maxpacket)
1562 bufferspace = ep0->ep.maxpacket;
1563
1564 /* Copy data to buffer */
1565 prefetchw(req->req.buf + req->req.actual);
1566 tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual,
1567 bufferspace);
1568 req->req.actual += bufferspace;
1569
1570 if (tr < ep0->ep.maxpacket) {
1571 /* This is the last packet */
1572 done(ep0, req, 0);
1573 udc->ep0state = WAIT_FOR_SETUP;
1574 return 1;
1575 }
1576 }
1577
1578 return 0;
1579}
1580
1581/* Must be called with lock */
1582static void stop_activity(struct lpc32xx_udc *udc)
1583{
1584 struct usb_gadget_driver *driver = udc->driver;
1585 int i;
1586
1587 if (udc->gadget.speed == USB_SPEED_UNKNOWN)
1588 driver = NULL;
1589
1590 udc->gadget.speed = USB_SPEED_UNKNOWN;
1591 udc->suspended = 0;
1592
1593 for (i = 0; i < NUM_ENDPOINTS; i++) {
1594 struct lpc32xx_ep *ep = &udc->ep[i];
1595 nuke(ep, -ESHUTDOWN);
1596 }
1597 if (driver) {
1598 spin_unlock(&udc->lock);
1599 driver->disconnect(&udc->gadget);
1600 spin_lock(&udc->lock);
1601 }
1602
1603 isp1301_pullup_enable(udc, 0, 0);
1604 udc_disable(udc);
1605 udc_reinit(udc);
1606}
1607
1608/*
1609 * Activate or kill host pullup
1610 * Can be called with or without lock
1611 */
1612static void pullup(struct lpc32xx_udc *udc, int is_on)
1613{
1614 if (!udc->clocked)
1615 return;
1616
1617 if (!udc->enabled || !udc->vbus)
1618 is_on = 0;
1619
1620 if (is_on != udc->pullup)
1621 isp1301_pullup_enable(udc, is_on, 0);
1622}
1623
1624/* Must be called without lock */
1625static int lpc32xx_ep_disable(struct usb_ep *_ep)
1626{
1627 struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
1628 struct lpc32xx_udc *udc = ep->udc;
1629 unsigned long flags;
1630
1631 if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0))
1632 return -EINVAL;
1633 spin_lock_irqsave(&udc->lock, flags);
1634
1635 nuke(ep, -ESHUTDOWN);
1636
24a28e42
RS
1637 /* Clear all DMA statuses for this EP */
1638 udc_ep_dma_disable(udc, ep->hwep_num);
1639 writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
1640 writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
1641 writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
1642 writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
1643
1644 /* Remove the DD pointer in the UDCA */
1645 udc->udca_v_base[ep->hwep_num] = 0;
1646
1647 /* Disable and reset endpoint and interrupt */
1648 uda_clear_hwepint(udc, ep->hwep_num);
1649 udc_unrealize_hwep(udc, ep->hwep_num);
1650
1651 ep->hwep_num = 0;
1652
1653 spin_unlock_irqrestore(&udc->lock, flags);
1654
1655 atomic_dec(&udc->enabled_ep_cnt);
1656 wake_up(&udc->ep_disable_wait_queue);
1657
1658 return 0;
1659}
1660
1661/* Must be called without lock */
1662static int lpc32xx_ep_enable(struct usb_ep *_ep,
1663 const struct usb_endpoint_descriptor *desc)
1664{
1665 struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
1666 struct lpc32xx_udc *udc = ep->udc;
1667 u16 maxpacket;
1668 u32 tmp;
1669 unsigned long flags;
1670
1671 /* Verify EP data */
78ca9139 1672 if ((!_ep) || (!ep) || (!desc) ||
24a28e42
RS
1673 (desc->bDescriptorType != USB_DT_ENDPOINT)) {
1674 dev_dbg(udc->dev, "bad ep or descriptor\n");
1675 return -EINVAL;
1676 }
1677 maxpacket = usb_endpoint_maxp(desc);
1678 if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) {
1679 dev_dbg(udc->dev, "bad ep descriptor's packet size\n");
1680 return -EINVAL;
1681 }
1682
1683 /* Don't touch EP0 */
1684 if (ep->hwep_num_base == 0) {
1685 dev_dbg(udc->dev, "Can't re-enable EP0!!!\n");
1686 return -EINVAL;
1687 }
1688
1689 /* Is driver ready? */
1690 if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
1691 dev_dbg(udc->dev, "bogus device state\n");
1692 return -ESHUTDOWN;
1693 }
1694
1695 tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
1696 switch (tmp) {
1697 case USB_ENDPOINT_XFER_CONTROL:
1698 return -EINVAL;
1699
1700 case USB_ENDPOINT_XFER_INT:
1701 if (maxpacket > ep->maxpacket) {
1702 dev_dbg(udc->dev,
1703 "Bad INT endpoint maxpacket %d\n", maxpacket);
1704 return -EINVAL;
1705 }
1706 break;
1707
1708 case USB_ENDPOINT_XFER_BULK:
1709 switch (maxpacket) {
1710 case 8:
1711 case 16:
1712 case 32:
1713 case 64:
1714 break;
1715
1716 default:
1717 dev_dbg(udc->dev,
1718 "Bad BULK endpoint maxpacket %d\n", maxpacket);
1719 return -EINVAL;
1720 }
1721 break;
1722
1723 case USB_ENDPOINT_XFER_ISOC:
1724 break;
1725 }
1726 spin_lock_irqsave(&udc->lock, flags);
1727
1728 /* Initialize endpoint to match the selected descriptor */
1729 ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
24a28e42
RS
1730 ep->ep.maxpacket = maxpacket;
1731
1732 /* Map hardware endpoint from base and direction */
1733 if (ep->is_in)
1734 /* IN endpoints are offset 1 from the OUT endpoint */
1735 ep->hwep_num = ep->hwep_num_base + EP_IN;
1736 else
1737 ep->hwep_num = ep->hwep_num_base;
1738
1739 ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name,
1740 ep->hwep_num, maxpacket, (ep->is_in == 1));
1741
1742 /* Realize the endpoint, interrupt is enabled later when
1743 * buffers are queued, IN EPs will NAK until buffers are ready */
1744 udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket);
1745 udc_clr_buffer_hwep(udc, ep->hwep_num);
1746 uda_disable_hwepint(udc, ep->hwep_num);
1747 udc_clrstall_hwep(udc, ep->hwep_num);
1748
1749 /* Clear all DMA statuses for this EP */
1750 udc_ep_dma_disable(udc, ep->hwep_num);
1751 writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
1752 writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
1753 writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
1754 writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
1755
1756 spin_unlock_irqrestore(&udc->lock, flags);
1757
1758 atomic_inc(&udc->enabled_ep_cnt);
1759 return 0;
1760}
1761
1762/*
1763 * Allocate a USB request list
1764 * Can be called with or without lock
1765 */
1766static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep,
1767 gfp_t gfp_flags)
1768{
1769 struct lpc32xx_request *req;
1770
1771 req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags);
1772 if (!req)
1773 return NULL;
1774
1775 INIT_LIST_HEAD(&req->queue);
1776 return &req->req;
1777}
1778
1779/*
1780 * De-allocate a USB request list
1781 * Can be called with or without lock
1782 */
1783static void lpc32xx_ep_free_request(struct usb_ep *_ep,
1784 struct usb_request *_req)
1785{
1786 struct lpc32xx_request *req;
1787
1788 req = container_of(_req, struct lpc32xx_request, req);
1789 BUG_ON(!list_empty(&req->queue));
1790 kfree(req);
1791}
1792
1793/* Must be called without lock */
1794static int lpc32xx_ep_queue(struct usb_ep *_ep,
1795 struct usb_request *_req, gfp_t gfp_flags)
1796{
1797 struct lpc32xx_request *req;
1798 struct lpc32xx_ep *ep;
1799 struct lpc32xx_udc *udc;
1800 unsigned long flags;
1801 int status = 0;
1802
1803 req = container_of(_req, struct lpc32xx_request, req);
1804 ep = container_of(_ep, struct lpc32xx_ep, ep);
1805
005a6430 1806 if (!_ep || !_req || !_req->complete || !_req->buf ||
24a28e42
RS
1807 !list_empty(&req->queue))
1808 return -EINVAL;
1809
1810 udc = ep->udc;
1811
005a6430
PC
1812 if (udc->gadget.speed == USB_SPEED_UNKNOWN)
1813 return -EPIPE;
24a28e42
RS
1814
1815 if (ep->lep) {
24a28e42
RS
1816 struct lpc32xx_usbd_dd_gad *dd;
1817
369ac9cb
FB
1818 status = usb_gadget_map_request(&udc->gadget, _req, ep->is_in);
1819 if (status)
1820 return status;
24a28e42
RS
1821
1822 /* For the request, build a list of DDs */
1823 dd = udc_dd_alloc(udc);
1824 if (!dd) {
1825 /* Error allocating DD */
1826 return -ENOMEM;
1827 }
1828 req->dd_desc_ptr = dd;
1829
1830 /* Setup the DMA descriptor */
1831 dd->dd_next_phy = dd->dd_next_v = 0;
1832 dd->dd_buffer_addr = req->req.dma;
1833 dd->dd_status = 0;
1834
1835 /* Special handling for ISO EPs */
1836 if (ep->eptype == EP_ISO_TYPE) {
1837 dd->dd_setup = DD_SETUP_ISO_EP |
1838 DD_SETUP_PACKETLEN(0) |
1839 DD_SETUP_DMALENBYTES(1);
1840 dd->dd_iso_ps_mem_addr = dd->this_dma + 24;
1841 if (ep->is_in)
1842 dd->iso_status[0] = req->req.length;
1843 else
1844 dd->iso_status[0] = 0;
1845 } else
1846 dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) |
1847 DD_SETUP_DMALENBYTES(req->req.length);
1848 }
1849
1850 ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name,
1851 _req, _req->length, _req->buf, ep->is_in, _req->zero);
1852
1853 spin_lock_irqsave(&udc->lock, flags);
1854
1855 _req->status = -EINPROGRESS;
1856 _req->actual = 0;
1857 req->send_zlp = _req->zero;
1858
1859 /* Kickstart empty queues */
1860 if (list_empty(&ep->queue)) {
1861 list_add_tail(&req->queue, &ep->queue);
1862
1863 if (ep->hwep_num_base == 0) {
1864 /* Handle expected data direction */
1865 if (ep->is_in) {
1866 /* IN packet to host */
1867 udc->ep0state = DATA_IN;
1868 status = udc_ep0_in_req(udc);
1869 } else {
1870 /* OUT packet from host */
1871 udc->ep0state = DATA_OUT;
1872 status = udc_ep0_out_req(udc);
1873 }
1874 } else if (ep->is_in) {
1875 /* IN packet to host and kick off transfer */
1876 if (!ep->req_pending)
1877 udc_ep_in_req_dma(udc, ep);
1878 } else
1879 /* OUT packet from host and kick off list */
1880 if (!ep->req_pending)
1881 udc_ep_out_req_dma(udc, ep);
1882 } else
1883 list_add_tail(&req->queue, &ep->queue);
1884
1885 spin_unlock_irqrestore(&udc->lock, flags);
1886
1887 return (status < 0) ? status : 0;
1888}
1889
1890/* Must be called without lock */
1891static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
1892{
1893 struct lpc32xx_ep *ep;
1894 struct lpc32xx_request *req;
1895 unsigned long flags;
1896
1897 ep = container_of(_ep, struct lpc32xx_ep, ep);
1898 if (!_ep || ep->hwep_num_base == 0)
1899 return -EINVAL;
1900
1901 spin_lock_irqsave(&ep->udc->lock, flags);
1902
1903 /* make sure it's actually queued on this endpoint */
1904 list_for_each_entry(req, &ep->queue, queue) {
1905 if (&req->req == _req)
1906 break;
1907 }
1908 if (&req->req != _req) {
1909 spin_unlock_irqrestore(&ep->udc->lock, flags);
1910 return -EINVAL;
1911 }
1912
1913 done(ep, req, -ECONNRESET);
1914
1915 spin_unlock_irqrestore(&ep->udc->lock, flags);
1916
1917 return 0;
1918}
1919
1920/* Must be called without lock */
1921static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
1922{
1923 struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
1924 struct lpc32xx_udc *udc = ep->udc;
1925 unsigned long flags;
1926
78ca9139 1927 if ((!ep) || (ep->hwep_num <= 1))
24a28e42
RS
1928 return -EINVAL;
1929
1930 /* Don't halt an IN EP */
1931 if (ep->is_in)
1932 return -EAGAIN;
1933
1934 spin_lock_irqsave(&udc->lock, flags);
1935
1936 if (value == 1) {
1937 /* stall */
1938 udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
1939 DAT_WR_BYTE(EP_STAT_ST));
1940 } else {
1941 /* End stall */
1942 ep->wedge = 0;
1943 udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
1944 DAT_WR_BYTE(0));
1945 }
1946
1947 spin_unlock_irqrestore(&udc->lock, flags);
1948
1949 return 0;
1950}
1951
1952/* set the halt feature and ignores clear requests */
1953static int lpc32xx_ep_set_wedge(struct usb_ep *_ep)
1954{
1955 struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
1956
1957 if (!_ep || !ep->udc)
1958 return -EINVAL;
1959
1960 ep->wedge = 1;
1961
1962 return usb_ep_set_halt(_ep);
1963}
1964
1965static const struct usb_ep_ops lpc32xx_ep_ops = {
1966 .enable = lpc32xx_ep_enable,
1967 .disable = lpc32xx_ep_disable,
1968 .alloc_request = lpc32xx_ep_alloc_request,
1969 .free_request = lpc32xx_ep_free_request,
1970 .queue = lpc32xx_ep_queue,
1971 .dequeue = lpc32xx_ep_dequeue,
1972 .set_halt = lpc32xx_ep_set_halt,
1973 .set_wedge = lpc32xx_ep_set_wedge,
1974};
1975
1976/* Send a ZLP on a non-0 IN EP */
1977void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
1978{
1979 /* Clear EP status */
1980 udc_clearep_getsts(udc, ep->hwep_num);
1981
1982 /* Send ZLP via FIFO mechanism */
1983 udc_write_hwep(udc, ep->hwep_num, NULL, 0);
1984}
1985
1986/*
1987 * Handle EP completion for ZLP
1988 * This function will only be called when a delayed ZLP needs to be sent out
1989 * after a DMA transfer has filled both buffers.
1990 */
1991void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
1992{
1993 u32 epstatus;
1994 struct lpc32xx_request *req;
1995
1996 if (ep->hwep_num <= 0)
1997 return;
1998
1999 uda_clear_hwepint(udc, ep->hwep_num);
2000
2001 /* If this interrupt isn't enabled, return now */
2002 if (!(udc->enabled_hwepints & (1 << ep->hwep_num)))
2003 return;
2004
2005 /* Get endpoint status */
2006 epstatus = udc_clearep_getsts(udc, ep->hwep_num);
2007
2008 /*
2009 * This should never happen, but protect against writing to the
2010 * buffer when full.
2011 */
2012 if (epstatus & EP_SEL_F)
2013 return;
2014
2015 if (ep->is_in) {
2016 udc_send_in_zlp(udc, ep);
2017 uda_disable_hwepint(udc, ep->hwep_num);
2018 } else
2019 return;
2020
2021 /* If there isn't a request waiting, something went wrong */
2022 req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
2023 if (req) {
2024 done(ep, req, 0);
2025
2026 /* Start another request if ready */
2027 if (!list_empty(&ep->queue)) {
2028 if (ep->is_in)
2029 udc_ep_in_req_dma(udc, ep);
2030 else
2031 udc_ep_out_req_dma(udc, ep);
2032 } else
2033 ep->req_pending = 0;
2034 }
2035}
2036
2037
2038/* DMA end of transfer completion */
2039static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
2040{
2041 u32 status, epstatus;
2042 struct lpc32xx_request *req;
2043 struct lpc32xx_usbd_dd_gad *dd;
2044
2045#ifdef CONFIG_USB_GADGET_DEBUG_FILES
2046 ep->totalints++;
2047#endif
2048
2049 req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
2050 if (!req) {
2051 ep_err(ep, "DMA interrupt on no req!\n");
2052 return;
2053 }
2054 dd = req->dd_desc_ptr;
2055
2056 /* DMA descriptor should always be retired for this call */
2057 if (!(dd->dd_status & DD_STATUS_DD_RETIRED))
2058 ep_warn(ep, "DMA descriptor did not retire\n");
2059
2060 /* Disable DMA */
2061 udc_ep_dma_disable(udc, ep->hwep_num);
2062 writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr));
2063 writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr));
2064
2065 /* System error? */
2066 if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) &
2067 (1 << ep->hwep_num)) {
2068 writel((1 << ep->hwep_num),
2069 USBD_SYSERRTINTCLR(udc->udp_baseaddr));
2070 ep_err(ep, "AHB critical error!\n");
2071 ep->req_pending = 0;
2072
2073 /* The error could have occurred on a packet of a multipacket
2074 * transfer, so recovering the transfer is not possible. Close
2075 * the request with an error */
2076 done(ep, req, -ECONNABORTED);
2077 return;
2078 }
2079
2080 /* Handle the current DD's status */
2081 status = dd->dd_status;
2082 switch (status & DD_STATUS_STS_MASK) {
2083 case DD_STATUS_STS_NS:
2084 /* DD not serviced? This shouldn't happen! */
2085 ep->req_pending = 0;
2086 ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n",
2087 status);
2088
2089 done(ep, req, -ECONNABORTED);
2090 return;
2091
2092 case DD_STATUS_STS_BS:
2093 /* Interrupt only fires on EOT - This shouldn't happen! */
2094 ep->req_pending = 0;
2095 ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n",
2096 status);
2097 done(ep, req, -ECONNABORTED);
2098 return;
2099
2100 case DD_STATUS_STS_NC:
2101 case DD_STATUS_STS_DUR:
2102 /* Really just a short packet, not an underrun */
2103 /* This is a good status and what we expect */
2104 break;
2105
2106 default:
2107 /* Data overrun, system error, or unknown */
2108 ep->req_pending = 0;
2109 ep_err(ep, "DMA critical EP error: System error (0x%x)!\n",
2110 status);
2111 done(ep, req, -ECONNABORTED);
2112 return;
2113 }
2114
2115 /* ISO endpoints are handled differently */
2116 if (ep->eptype == EP_ISO_TYPE) {
2117 if (ep->is_in)
2118 req->req.actual = req->req.length;
2119 else
2120 req->req.actual = dd->iso_status[0] & 0xFFFF;
2121 } else
2122 req->req.actual += DD_STATUS_CURDMACNT(status);
2123
2124 /* Send a ZLP if necessary. This will be done for non-int
2125 * packets which have a size that is a divisor of MAXP */
2126 if (req->send_zlp) {
2127 /*
2128 * If at least 1 buffer is available, send the ZLP now.
2129 * Otherwise, the ZLP send needs to be deferred until a
2130 * buffer is available.
2131 */
2132 if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
2133 udc_clearep_getsts(udc, ep->hwep_num);
2134 uda_enable_hwepint(udc, ep->hwep_num);
2135 epstatus = udc_clearep_getsts(udc, ep->hwep_num);
2136
2137 /* Let the EP interrupt handle the ZLP */
2138 return;
2139 } else
2140 udc_send_in_zlp(udc, ep);
2141 }
2142
2143 /* Transfer request is complete */
2144 done(ep, req, 0);
2145
2146 /* Start another request if ready */
2147 udc_clearep_getsts(udc, ep->hwep_num);
2148 if (!list_empty((&ep->queue))) {
2149 if (ep->is_in)
2150 udc_ep_in_req_dma(udc, ep);
2151 else
2152 udc_ep_out_req_dma(udc, ep);
2153 } else
2154 ep->req_pending = 0;
2155
2156}
2157
2158/*
2159 *
2160 * Endpoint 0 functions
2161 *
2162 */
2163static void udc_handle_dev(struct lpc32xx_udc *udc)
2164{
2165 u32 tmp;
2166
2167 udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT);
2168 tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT);
2169
2170 if (tmp & DEV_RST)
2171 uda_usb_reset(udc);
2172 else if (tmp & DEV_CON_CH)
2173 uda_power_event(udc, (tmp & DEV_CON));
2174 else if (tmp & DEV_SUS_CH) {
2175 if (tmp & DEV_SUS) {
2176 if (udc->vbus == 0)
2177 stop_activity(udc);
2178 else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
2179 udc->driver) {
2180 /* Power down transceiver */
2181 udc->poweron = 0;
2182 schedule_work(&udc->pullup_job);
2183 uda_resm_susp_event(udc, 1);
2184 }
2185 } else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
2186 udc->driver && udc->vbus) {
2187 uda_resm_susp_event(udc, 0);
2188 /* Power up transceiver */
2189 udc->poweron = 1;
2190 schedule_work(&udc->pullup_job);
2191 }
2192 }
2193}
2194
2195static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex)
2196{
2197 struct lpc32xx_ep *ep;
2198 u32 ep0buff = 0, tmp;
2199
2200 switch (reqtype & USB_RECIP_MASK) {
2201 case USB_RECIP_INTERFACE:
2202 break; /* Not supported */
2203
2204 case USB_RECIP_DEVICE:
d60d9392 2205 ep0buff = udc->gadget.is_selfpowered;
24a28e42
RS
2206 if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP))
2207 ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP);
2208 break;
2209
2210 case USB_RECIP_ENDPOINT:
2211 tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
2212 ep = &udc->ep[tmp];
78ca9139 2213 if ((tmp == 0) || (tmp >= NUM_ENDPOINTS))
24a28e42
RS
2214 return -EOPNOTSUPP;
2215
2216 if (wIndex & USB_DIR_IN) {
2217 if (!ep->is_in)
2218 return -EOPNOTSUPP; /* Something's wrong */
2219 } else if (ep->is_in)
2220 return -EOPNOTSUPP; /* Not an IN endpoint */
2221
2222 /* Get status of the endpoint */
2223 udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num));
2224 tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num));
2225
2226 if (tmp & EP_SEL_ST)
2227 ep0buff = (1 << USB_ENDPOINT_HALT);
2228 else
2229 ep0buff = 0;
2230 break;
2231
2232 default:
2233 break;
2234 }
2235
2236 /* Return data */
2237 udc_write_hwep(udc, EP_IN, &ep0buff, 2);
2238
2239 return 0;
2240}
2241
2242static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
2243{
2244 struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
2245 struct usb_ctrlrequest ctrlpkt;
2246 int i, bytes;
2247 u16 wIndex, wValue, wLength, reqtype, req, tmp;
2248
2249 /* Nuke previous transfers */
2250 nuke(ep0, -EPROTO);
2251
2252 /* Get setup packet */
2253 bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8);
2254 if (bytes != 8) {
2255 ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n",
2256 bytes);
2257 return;
2258 }
2259
2260 /* Native endianness */
2261 wIndex = le16_to_cpu(ctrlpkt.wIndex);
2262 wValue = le16_to_cpu(ctrlpkt.wValue);
2263 wLength = le16_to_cpu(ctrlpkt.wLength);
2264 reqtype = le16_to_cpu(ctrlpkt.bRequestType);
2265
2266 /* Set direction of EP0 */
2267 if (likely(reqtype & USB_DIR_IN))
2268 ep0->is_in = 1;
2269 else
2270 ep0->is_in = 0;
2271
2272 /* Handle SETUP packet */
2273 req = le16_to_cpu(ctrlpkt.bRequest);
2274 switch (req) {
2275 case USB_REQ_CLEAR_FEATURE:
2276 case USB_REQ_SET_FEATURE:
2277 switch (reqtype) {
2278 case (USB_TYPE_STANDARD | USB_RECIP_DEVICE):
2279 if (wValue != USB_DEVICE_REMOTE_WAKEUP)
2280 goto stall; /* Nothing else handled */
2281
2282 /* Tell board about event */
2283 if (req == USB_REQ_CLEAR_FEATURE)
2284 udc->dev_status &=
2285 ~(1 << USB_DEVICE_REMOTE_WAKEUP);
2286 else
2287 udc->dev_status |=
2288 (1 << USB_DEVICE_REMOTE_WAKEUP);
2289 uda_remwkp_cgh(udc);
2290 goto zlp_send;
2291
2292 case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
2293 tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
2294 if ((wValue != USB_ENDPOINT_HALT) ||
2295 (tmp >= NUM_ENDPOINTS))
2296 break;
2297
2298 /* Find hardware endpoint from logical endpoint */
2299 ep = &udc->ep[tmp];
2300 tmp = ep->hwep_num;
2301 if (tmp == 0)
2302 break;
2303
2304 if (req == USB_REQ_SET_FEATURE)
2305 udc_stall_hwep(udc, tmp);
2306 else if (!ep->wedge)
2307 udc_clrstall_hwep(udc, tmp);
2308
2309 goto zlp_send;
2310
2311 default:
2312 break;
2313 }
2314
2315
2316 case USB_REQ_SET_ADDRESS:
2317 if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
2318 udc_set_address(udc, wValue);
2319 goto zlp_send;
2320 }
2321 break;
2322
2323 case USB_REQ_GET_STATUS:
2324 udc_get_status(udc, reqtype, wIndex);
2325 return;
2326
2327 default:
2328 break; /* Let GadgetFS handle the descriptor instead */
2329 }
2330
2331 if (likely(udc->driver)) {
2332 /* device-2-host (IN) or no data setup command, process
2333 * immediately */
2334 spin_unlock(&udc->lock);
2335 i = udc->driver->setup(&udc->gadget, &ctrlpkt);
2336
2337 spin_lock(&udc->lock);
2338 if (req == USB_REQ_SET_CONFIGURATION) {
2339 /* Configuration is set after endpoints are realized */
2340 if (wValue) {
2341 /* Set configuration */
2342 udc_set_device_configured(udc);
2343
2344 udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
2345 DAT_WR_BYTE(AP_CLK |
2346 INAK_BI | INAK_II));
2347 } else {
2348 /* Clear configuration */
2349 udc_set_device_unconfigured(udc);
2350
2351 /* Disable NAK interrupts */
2352 udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
2353 DAT_WR_BYTE(AP_CLK));
2354 }
2355 }
2356
2357 if (i < 0) {
2358 /* setup processing failed, force stall */
0696f929 2359 dev_dbg(udc->dev,
24a28e42
RS
2360 "req %02x.%02x protocol STALL; stat %d\n",
2361 reqtype, req, i);
2362 udc->ep0state = WAIT_FOR_SETUP;
2363 goto stall;
2364 }
2365 }
2366
2367 if (!ep0->is_in)
2368 udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */
2369
2370 return;
2371
2372stall:
2373 udc_stall_hwep(udc, EP_IN);
2374 return;
2375
2376zlp_send:
2377 udc_ep0_send_zlp(udc);
2378 return;
2379}
2380
2381/* IN endpoint 0 transfer */
2382static void udc_handle_ep0_in(struct lpc32xx_udc *udc)
2383{
2384 struct lpc32xx_ep *ep0 = &udc->ep[0];
2385 u32 epstatus;
2386
2387 /* Clear EP interrupt */
2388 epstatus = udc_clearep_getsts(udc, EP_IN);
2389
2390#ifdef CONFIG_USB_GADGET_DEBUG_FILES
2391 ep0->totalints++;
2392#endif
2393
2394 /* Stalled? Clear stall and reset buffers */
2395 if (epstatus & EP_SEL_ST) {
2396 udc_clrstall_hwep(udc, EP_IN);
2397 nuke(ep0, -ECONNABORTED);
2398 udc->ep0state = WAIT_FOR_SETUP;
2399 return;
2400 }
2401
2402 /* Is a buffer available? */
2403 if (!(epstatus & EP_SEL_F)) {
2404 /* Handle based on current state */
2405 if (udc->ep0state == DATA_IN)
2406 udc_ep0_in_req(udc);
2407 else {
2408 /* Unknown state for EP0 oe end of DATA IN phase */
2409 nuke(ep0, -ECONNABORTED);
2410 udc->ep0state = WAIT_FOR_SETUP;
2411 }
2412 }
2413}
2414
2415/* OUT endpoint 0 transfer */
2416static void udc_handle_ep0_out(struct lpc32xx_udc *udc)
2417{
2418 struct lpc32xx_ep *ep0 = &udc->ep[0];
2419 u32 epstatus;
2420
2421 /* Clear EP interrupt */
2422 epstatus = udc_clearep_getsts(udc, EP_OUT);
2423
2424
2425#ifdef CONFIG_USB_GADGET_DEBUG_FILES
2426 ep0->totalints++;
2427#endif
2428
2429 /* Stalled? */
2430 if (epstatus & EP_SEL_ST) {
2431 udc_clrstall_hwep(udc, EP_OUT);
2432 nuke(ep0, -ECONNABORTED);
2433 udc->ep0state = WAIT_FOR_SETUP;
2434 return;
2435 }
2436
2437 /* A NAK may occur if a packet couldn't be received yet */
2438 if (epstatus & EP_SEL_EPN)
2439 return;
2440 /* Setup packet incoming? */
2441 if (epstatus & EP_SEL_STP) {
2442 nuke(ep0, 0);
2443 udc->ep0state = WAIT_FOR_SETUP;
2444 }
2445
2446 /* Data available? */
2447 if (epstatus & EP_SEL_F)
2448 /* Handle based on current state */
2449 switch (udc->ep0state) {
2450 case WAIT_FOR_SETUP:
2451 udc_handle_ep0_setup(udc);
2452 break;
2453
2454 case DATA_OUT:
2455 udc_ep0_out_req(udc);
2456 break;
2457
2458 default:
2459 /* Unknown state for EP0 */
2460 nuke(ep0, -ECONNABORTED);
2461 udc->ep0state = WAIT_FOR_SETUP;
2462 }
2463}
2464
2465/* Must be called without lock */
2466static int lpc32xx_get_frame(struct usb_gadget *gadget)
2467{
2468 int frame;
2469 unsigned long flags;
2470 struct lpc32xx_udc *udc = to_udc(gadget);
2471
2472 if (!udc->clocked)
2473 return -EINVAL;
2474
2475 spin_lock_irqsave(&udc->lock, flags);
2476
2477 frame = (int) udc_get_current_frame(udc);
2478
2479 spin_unlock_irqrestore(&udc->lock, flags);
2480
2481 return frame;
2482}
2483
2484static int lpc32xx_wakeup(struct usb_gadget *gadget)
2485{
2486 return -ENOTSUPP;
2487}
2488
2489static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on)
2490{
d60d9392 2491 gadget->is_selfpowered = (is_on != 0);
24a28e42
RS
2492
2493 return 0;
2494}
2495
2496/*
2497 * vbus is here! turn everything on that's ready
2498 * Must be called without lock
2499 */
2500static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active)
2501{
2502 unsigned long flags;
2503 struct lpc32xx_udc *udc = to_udc(gadget);
2504
2505 spin_lock_irqsave(&udc->lock, flags);
2506
2507 /* Doesn't need lock */
2508 if (udc->driver) {
2509 udc_clk_set(udc, 1);
2510 udc_enable(udc);
2511 pullup(udc, is_active);
2512 } else {
2513 stop_activity(udc);
2514 pullup(udc, 0);
2515
2516 spin_unlock_irqrestore(&udc->lock, flags);
2517 /*
2518 * Wait for all the endpoints to disable,
2519 * before disabling clocks. Don't wait if
2520 * endpoints are not enabled.
2521 */
2522 if (atomic_read(&udc->enabled_ep_cnt))
2523 wait_event_interruptible(udc->ep_disable_wait_queue,
2524 (atomic_read(&udc->enabled_ep_cnt) == 0));
2525
2526 spin_lock_irqsave(&udc->lock, flags);
2527
2528 udc_clk_set(udc, 0);
2529 }
2530
2531 spin_unlock_irqrestore(&udc->lock, flags);
2532
2533 return 0;
2534}
2535
2536/* Can be called with or without lock */
2537static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on)
2538{
2539 struct lpc32xx_udc *udc = to_udc(gadget);
2540
2541 /* Doesn't need lock */
2542 pullup(udc, is_on);
2543
2544 return 0;
2545}
2546
252d8cec 2547static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *);
22835b80 2548static int lpc32xx_stop(struct usb_gadget *);
24a28e42
RS
2549
2550static const struct usb_gadget_ops lpc32xx_udc_ops = {
2551 .get_frame = lpc32xx_get_frame,
2552 .wakeup = lpc32xx_wakeup,
2553 .set_selfpowered = lpc32xx_set_selfpowered,
2554 .vbus_session = lpc32xx_vbus_session,
2555 .pullup = lpc32xx_pullup,
252d8cec
RS
2556 .udc_start = lpc32xx_start,
2557 .udc_stop = lpc32xx_stop,
24a28e42
RS
2558};
2559
2560static void nop_release(struct device *dev)
2561{
2562 /* nothing to free */
2563}
2564
c4846a18 2565static const struct lpc32xx_udc controller_template = {
24a28e42
RS
2566 .gadget = {
2567 .ops = &lpc32xx_udc_ops,
24a28e42
RS
2568 .name = driver_name,
2569 .dev = {
2570 .init_name = "gadget",
2571 .release = nop_release,
2572 }
2573 },
2574 .ep[0] = {
2575 .ep = {
2576 .name = "ep0",
2577 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2578 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
2579 USB_EP_CAPS_DIR_ALL),
24a28e42 2580 },
24a28e42
RS
2581 .maxpacket = 64,
2582 .hwep_num_base = 0,
2583 .hwep_num = 0, /* Can be 0 or 1, has special handling */
2584 .lep = 0,
2585 .eptype = EP_CTL_TYPE,
2586 },
2587 .ep[1] = {
2588 .ep = {
2589 .name = "ep1-int",
2590 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2591 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
2592 USB_EP_CAPS_DIR_ALL),
24a28e42 2593 },
24a28e42
RS
2594 .maxpacket = 64,
2595 .hwep_num_base = 2,
2596 .hwep_num = 0, /* 2 or 3, will be set later */
2597 .lep = 1,
2598 .eptype = EP_INT_TYPE,
2599 },
2600 .ep[2] = {
2601 .ep = {
2602 .name = "ep2-bulk",
2603 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2604 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2605 USB_EP_CAPS_DIR_ALL),
24a28e42 2606 },
24a28e42
RS
2607 .maxpacket = 64,
2608 .hwep_num_base = 4,
2609 .hwep_num = 0, /* 4 or 5, will be set later */
2610 .lep = 2,
2611 .eptype = EP_BLK_TYPE,
2612 },
2613 .ep[3] = {
2614 .ep = {
2615 .name = "ep3-iso",
2616 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2617 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
2618 USB_EP_CAPS_DIR_ALL),
24a28e42 2619 },
24a28e42
RS
2620 .maxpacket = 1023,
2621 .hwep_num_base = 6,
2622 .hwep_num = 0, /* 6 or 7, will be set later */
2623 .lep = 3,
2624 .eptype = EP_ISO_TYPE,
2625 },
2626 .ep[4] = {
2627 .ep = {
2628 .name = "ep4-int",
2629 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2630 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
2631 USB_EP_CAPS_DIR_ALL),
24a28e42 2632 },
24a28e42
RS
2633 .maxpacket = 64,
2634 .hwep_num_base = 8,
2635 .hwep_num = 0, /* 8 or 9, will be set later */
2636 .lep = 4,
2637 .eptype = EP_INT_TYPE,
2638 },
2639 .ep[5] = {
2640 .ep = {
2641 .name = "ep5-bulk",
2642 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2643 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2644 USB_EP_CAPS_DIR_ALL),
24a28e42 2645 },
24a28e42
RS
2646 .maxpacket = 64,
2647 .hwep_num_base = 10,
2648 .hwep_num = 0, /* 10 or 11, will be set later */
2649 .lep = 5,
2650 .eptype = EP_BLK_TYPE,
2651 },
2652 .ep[6] = {
2653 .ep = {
2654 .name = "ep6-iso",
2655 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2656 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
2657 USB_EP_CAPS_DIR_ALL),
24a28e42 2658 },
24a28e42
RS
2659 .maxpacket = 1023,
2660 .hwep_num_base = 12,
2661 .hwep_num = 0, /* 12 or 13, will be set later */
2662 .lep = 6,
2663 .eptype = EP_ISO_TYPE,
2664 },
2665 .ep[7] = {
2666 .ep = {
2667 .name = "ep7-int",
2668 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2669 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
2670 USB_EP_CAPS_DIR_ALL),
24a28e42 2671 },
24a28e42
RS
2672 .maxpacket = 64,
2673 .hwep_num_base = 14,
2674 .hwep_num = 0,
2675 .lep = 7,
2676 .eptype = EP_INT_TYPE,
2677 },
2678 .ep[8] = {
2679 .ep = {
2680 .name = "ep8-bulk",
2681 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2682 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2683 USB_EP_CAPS_DIR_ALL),
24a28e42 2684 },
24a28e42
RS
2685 .maxpacket = 64,
2686 .hwep_num_base = 16,
2687 .hwep_num = 0,
2688 .lep = 8,
2689 .eptype = EP_BLK_TYPE,
2690 },
2691 .ep[9] = {
2692 .ep = {
2693 .name = "ep9-iso",
2694 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2695 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
2696 USB_EP_CAPS_DIR_ALL),
24a28e42 2697 },
24a28e42
RS
2698 .maxpacket = 1023,
2699 .hwep_num_base = 18,
2700 .hwep_num = 0,
2701 .lep = 9,
2702 .eptype = EP_ISO_TYPE,
2703 },
2704 .ep[10] = {
2705 .ep = {
2706 .name = "ep10-int",
2707 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2708 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
2709 USB_EP_CAPS_DIR_ALL),
24a28e42 2710 },
24a28e42
RS
2711 .maxpacket = 64,
2712 .hwep_num_base = 20,
2713 .hwep_num = 0,
2714 .lep = 10,
2715 .eptype = EP_INT_TYPE,
2716 },
2717 .ep[11] = {
2718 .ep = {
2719 .name = "ep11-bulk",
2720 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2721 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2722 USB_EP_CAPS_DIR_ALL),
24a28e42 2723 },
24a28e42
RS
2724 .maxpacket = 64,
2725 .hwep_num_base = 22,
2726 .hwep_num = 0,
2727 .lep = 11,
2728 .eptype = EP_BLK_TYPE,
2729 },
2730 .ep[12] = {
2731 .ep = {
2732 .name = "ep12-iso",
2733 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2734 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
2735 USB_EP_CAPS_DIR_ALL),
24a28e42 2736 },
24a28e42
RS
2737 .maxpacket = 1023,
2738 .hwep_num_base = 24,
2739 .hwep_num = 0,
2740 .lep = 12,
2741 .eptype = EP_ISO_TYPE,
2742 },
2743 .ep[13] = {
2744 .ep = {
2745 .name = "ep13-int",
2746 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2747 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
2748 USB_EP_CAPS_DIR_ALL),
24a28e42 2749 },
24a28e42
RS
2750 .maxpacket = 64,
2751 .hwep_num_base = 26,
2752 .hwep_num = 0,
2753 .lep = 13,
2754 .eptype = EP_INT_TYPE,
2755 },
2756 .ep[14] = {
2757 .ep = {
2758 .name = "ep14-bulk",
2759 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2760 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2761 USB_EP_CAPS_DIR_ALL),
24a28e42 2762 },
24a28e42
RS
2763 .maxpacket = 64,
2764 .hwep_num_base = 28,
2765 .hwep_num = 0,
2766 .lep = 14,
2767 .eptype = EP_BLK_TYPE,
2768 },
2769 .ep[15] = {
2770 .ep = {
2771 .name = "ep15-bulk",
2772 .ops = &lpc32xx_ep_ops,
4d75c8bd
RB
2773 .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
2774 USB_EP_CAPS_DIR_ALL),
24a28e42 2775 },
24a28e42
RS
2776 .maxpacket = 1023,
2777 .hwep_num_base = 30,
2778 .hwep_num = 0,
2779 .lep = 15,
2780 .eptype = EP_BLK_TYPE,
2781 },
2782};
2783
2784/* ISO and status interrupts */
2785static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc)
2786{
2787 u32 tmp, devstat;
2788 struct lpc32xx_udc *udc = _udc;
2789
2790 spin_lock(&udc->lock);
2791
2792 /* Read the device status register */
2793 devstat = readl(USBD_DEVINTST(udc->udp_baseaddr));
2794
2795 devstat &= ~USBD_EP_FAST;
2796 writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr));
2797 devstat = devstat & udc->enabled_devints;
2798
2799 /* Device specific handling needed? */
2800 if (devstat & USBD_DEV_STAT)
2801 udc_handle_dev(udc);
2802
2803 /* Start of frame? (devstat & FRAME_INT):
2804 * The frame interrupt isn't really needed for ISO support,
2805 * as the driver will queue the necessary packets */
2806
2807 /* Error? */
2808 if (devstat & ERR_INT) {
2809 /* All types of errors, from cable removal during transfer to
2810 * misc protocol and bit errors. These are mostly for just info,
2811 * as the USB hardware will work around these. If these errors
2812 * happen alot, something is wrong. */
2813 udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT);
2814 tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT);
2815 dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp);
2816 }
2817
2818 spin_unlock(&udc->lock);
2819
2820 return IRQ_HANDLED;
2821}
2822
2823/* EP interrupts */
2824static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc)
2825{
2826 u32 tmp;
2827 struct lpc32xx_udc *udc = _udc;
2828
2829 spin_lock(&udc->lock);
2830
2831 /* Read the device status register */
2832 writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr));
2833
2834 /* Endpoints */
2835 tmp = readl(USBD_EPINTST(udc->udp_baseaddr));
2836
2837 /* Special handling for EP0 */
2838 if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
2839 /* Handle EP0 IN */
2840 if (tmp & (EP_MASK_SEL(0, EP_IN)))
2841 udc_handle_ep0_in(udc);
2842
2843 /* Handle EP0 OUT */
2844 if (tmp & (EP_MASK_SEL(0, EP_OUT)))
2845 udc_handle_ep0_out(udc);
2846 }
2847
2848 /* All other EPs */
2849 if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
2850 int i;
2851
2852 /* Handle other EP interrupts */
2853 for (i = 1; i < NUM_ENDPOINTS; i++) {
2854 if (tmp & (1 << udc->ep[i].hwep_num))
2855 udc_handle_eps(udc, &udc->ep[i]);
2856 }
2857 }
2858
2859 spin_unlock(&udc->lock);
2860
2861 return IRQ_HANDLED;
2862}
2863
2864static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc)
2865{
2866 struct lpc32xx_udc *udc = _udc;
2867
2868 int i;
2869 u32 tmp;
2870
2871 spin_lock(&udc->lock);
2872
2873 /* Handle EP DMA EOT interrupts */
2874 tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) |
2875 (readl(USBD_EPDMAST(udc->udp_baseaddr)) &
2876 readl(USBD_NDDRTINTST(udc->udp_baseaddr))) |
2877 readl(USBD_SYSERRTINTST(udc->udp_baseaddr));
2878 for (i = 1; i < NUM_ENDPOINTS; i++) {
2879 if (tmp & (1 << udc->ep[i].hwep_num))
2880 udc_handle_dma_ep(udc, &udc->ep[i]);
2881 }
2882
2883 spin_unlock(&udc->lock);
2884
2885 return IRQ_HANDLED;
2886}
2887
2888/*
2889 *
2890 * VBUS detection, pullup handler, and Gadget cable state notification
2891 *
2892 */
2893static void vbus_work(struct work_struct *work)
2894{
2895 u8 value;
2896 struct lpc32xx_udc *udc = container_of(work, struct lpc32xx_udc,
2897 vbus_job);
2898
2899 if (udc->enabled != 0) {
2900 /* Discharge VBUS real quick */
2901 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
2902 ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
2903
2904 /* Give VBUS some time (100mS) to discharge */
2905 msleep(100);
2906
2907 /* Disable VBUS discharge resistor */
2908 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
2909 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
2910 OTG1_VBUS_DISCHRG);
2911
2912 /* Clear interrupt */
2913 i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
2914 ISP1301_I2C_INTERRUPT_LATCH |
2915 ISP1301_I2C_REG_CLEAR_ADDR, ~0);
2916
2917 /* Get the VBUS status from the transceiver */
2918 value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
69da85ed 2919 ISP1301_I2C_INTERRUPT_SOURCE);
24a28e42
RS
2920
2921 /* VBUS on or off? */
69da85ed 2922 if (value & INT_SESS_VLD)
24a28e42
RS
2923 udc->vbus = 1;
2924 else
2925 udc->vbus = 0;
2926
2927 /* VBUS changed? */
2928 if (udc->last_vbus != udc->vbus) {
2929 udc->last_vbus = udc->vbus;
2930 lpc32xx_vbus_session(&udc->gadget, udc->vbus);
2931 }
2932 }
2933
2934 /* Re-enable after completion */
2935 enable_irq(udc->udp_irq[IRQ_USB_ATX]);
2936}
2937
2938static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
2939{
2940 struct lpc32xx_udc *udc = _udc;
2941
2942 /* Defer handling of VBUS IRQ to work queue */
2943 disable_irq_nosync(udc->udp_irq[IRQ_USB_ATX]);
2944 schedule_work(&udc->vbus_job);
2945
2946 return IRQ_HANDLED;
2947}
2948
252d8cec
RS
2949static int lpc32xx_start(struct usb_gadget *gadget,
2950 struct usb_gadget_driver *driver)
24a28e42 2951{
252d8cec
RS
2952 struct lpc32xx_udc *udc = to_udc(gadget);
2953 int i;
24a28e42 2954
252d8cec 2955 if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
24a28e42
RS
2956 dev_err(udc->dev, "bad parameter.\n");
2957 return -EINVAL;
2958 }
2959
2960 if (udc->driver) {
2961 dev_err(udc->dev, "UDC already has a gadget driver\n");
2962 return -EBUSY;
2963 }
2964
2965 udc->driver = driver;
eebc0d36 2966 udc->gadget.dev.of_node = udc->dev->of_node;
24a28e42 2967 udc->enabled = 1;
d60d9392 2968 udc->gadget.is_selfpowered = 1;
24a28e42
RS
2969 udc->vbus = 0;
2970
24a28e42
RS
2971 /* Force VBUS process once to check for cable insertion */
2972 udc->last_vbus = udc->vbus = 0;
2973 schedule_work(&udc->vbus_job);
2974
2975 /* Do not re-enable ATX IRQ (3) */
2976 for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++)
2977 enable_irq(udc->udp_irq[i]);
2978
2979 return 0;
2980}
2981
22835b80 2982static int lpc32xx_stop(struct usb_gadget *gadget)
24a28e42
RS
2983{
2984 int i;
252d8cec 2985 struct lpc32xx_udc *udc = to_udc(gadget);
24a28e42 2986
24a28e42
RS
2987 for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
2988 disable_irq(udc->udp_irq[i]);
2989
2990 if (udc->clocked) {
24a28e42
RS
2991 spin_lock(&udc->lock);
2992 stop_activity(udc);
2993 spin_unlock(&udc->lock);
2994
2995 /*
2996 * Wait for all the endpoints to disable,
2997 * before disabling clocks. Don't wait if
2998 * endpoints are not enabled.
2999 */
3000 if (atomic_read(&udc->enabled_ep_cnt))
3001 wait_event_interruptible(udc->ep_disable_wait_queue,
3002 (atomic_read(&udc->enabled_ep_cnt) == 0));
3003
3004 spin_lock(&udc->lock);
3005 udc_clk_set(udc, 0);
3006 spin_unlock(&udc->lock);
3007 }
3008
3009 udc->enabled = 0;
24a28e42
RS
3010 udc->driver = NULL;
3011
24a28e42
RS
3012 return 0;
3013}
3014
3015static void lpc32xx_udc_shutdown(struct platform_device *dev)
3016{
3017 /* Force disconnect on reboot */
252d8cec 3018 struct lpc32xx_udc *udc = platform_get_drvdata(dev);
24a28e42
RS
3019
3020 pullup(udc, 0);
3021}
3022
3023/*
3024 * Callbacks to be overridden by options passed via OF (TODO)
3025 */
3026
3027static void lpc32xx_usbd_conn_chg(int conn)
3028{
3029 /* Do nothing, it might be nice to enable an LED
3030 * based on conn state being !0 */
3031}
3032
3033static void lpc32xx_usbd_susp_chg(int susp)
3034{
3035 /* Device suspend if susp != 0 */
3036}
3037
3038static void lpc32xx_rmwkup_chg(int remote_wakup_enable)
3039{
3040 /* Enable or disable USB remote wakeup */
3041}
3042
3043struct lpc32xx_usbd_cfg lpc32xx_usbddata = {
3044 .vbus_drv_pol = 0,
3045 .conn_chgb = &lpc32xx_usbd_conn_chg,
3046 .susp_chgb = &lpc32xx_usbd_susp_chg,
3047 .rmwk_chgb = &lpc32xx_rmwkup_chg,
3048};
3049
3050
3051static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F;
3052
b1a7c4f2 3053static int lpc32xx_udc_probe(struct platform_device *pdev)
24a28e42
RS
3054{
3055 struct device *dev = &pdev->dev;
c4846a18 3056 struct lpc32xx_udc *udc;
24a28e42
RS
3057 int retval, i;
3058 struct resource *res;
3059 dma_addr_t dma_handle;
3060 struct device_node *isp1301_node;
3061
58b949e0 3062 udc = kmemdup(&controller_template, sizeof(*udc), GFP_KERNEL);
c4846a18
RS
3063 if (!udc)
3064 return -ENOMEM;
3065
c4846a18
RS
3066 for (i = 0; i <= 15; i++)
3067 udc->ep[i].udc = udc;
3068 udc->gadget.ep0 = &udc->ep[0].ep;
3069
24a28e42
RS
3070 /* init software state */
3071 udc->gadget.dev.parent = dev;
3072 udc->pdev = pdev;
3073 udc->dev = &pdev->dev;
3074 udc->enabled = 0;
3075
3076 if (pdev->dev.of_node) {
3077 isp1301_node = of_parse_phandle(pdev->dev.of_node,
3078 "transceiver", 0);
3079 } else {
3080 isp1301_node = NULL;
3081 }
3082
3083 udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
c4846a18
RS
3084 if (!udc->isp1301_i2c_client) {
3085 retval = -EPROBE_DEFER;
3086 goto phy_fail;
3087 }
24a28e42
RS
3088
3089 dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
3090 udc->isp1301_i2c_client->addr);
3091
3092 pdev->dev.dma_mask = &lpc32xx_usbd_dmamask;
22d9d8e8
RK
3093 retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
3094 if (retval)
3095 goto resource_fail;
24a28e42
RS
3096
3097 udc->board = &lpc32xx_usbddata;
3098
3099 /*
3100 * Resources are mapped as follows:
3101 * IORESOURCE_MEM, base address and size of USB space
3102 * IORESOURCE_IRQ, USB device low priority interrupt number
3103 * IORESOURCE_IRQ, USB device high priority interrupt number
3104 * IORESOURCE_IRQ, USB device interrupt number
3105 * IORESOURCE_IRQ, USB transceiver interrupt number
3106 */
3107 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
c4846a18
RS
3108 if (!res) {
3109 retval = -ENXIO;
3110 goto resource_fail;
3111 }
24a28e42
RS
3112
3113 spin_lock_init(&udc->lock);
3114
3115 /* Get IRQs */
3116 for (i = 0; i < 4; i++) {
3117 udc->udp_irq[i] = platform_get_irq(pdev, i);
3118 if (udc->udp_irq[i] < 0) {
3119 dev_err(udc->dev,
3120 "irq resource %d not available!\n", i);
c4846a18
RS
3121 retval = udc->udp_irq[i];
3122 goto irq_fail;
24a28e42
RS
3123 }
3124 }
3125
3126 udc->io_p_start = res->start;
3127 udc->io_p_size = resource_size(res);
3128 if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) {
3129 dev_err(udc->dev, "someone's using UDC memory\n");
c4846a18
RS
3130 retval = -EBUSY;
3131 goto request_mem_region_fail;
24a28e42
RS
3132 }
3133
3134 udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size);
3135 if (!udc->udp_baseaddr) {
3136 retval = -ENOMEM;
3137 dev_err(udc->dev, "IO map failure\n");
3138 goto io_map_fail;
3139 }
3140
3141 /* Enable AHB slave USB clock, needed for further USB clock control */
3142 writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
3143
3144 /* Get required clocks */
3145 udc->usb_pll_clk = clk_get(&pdev->dev, "ck_pll5");
3146 if (IS_ERR(udc->usb_pll_clk)) {
3147 dev_err(udc->dev, "failed to acquire USB PLL\n");
3148 retval = PTR_ERR(udc->usb_pll_clk);
3149 goto pll_get_fail;
3150 }
3151 udc->usb_slv_clk = clk_get(&pdev->dev, "ck_usbd");
3152 if (IS_ERR(udc->usb_slv_clk)) {
3153 dev_err(udc->dev, "failed to acquire USB device clock\n");
3154 retval = PTR_ERR(udc->usb_slv_clk);
3155 goto usb_clk_get_fail;
3156 }
50856699
APS
3157 udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
3158 if (IS_ERR(udc->usb_otg_clk)) {
3159 dev_err(udc->dev, "failed to acquire USB otg clock\n");
44fd6c02 3160 retval = PTR_ERR(udc->usb_otg_clk);
50856699
APS
3161 goto usb_otg_clk_get_fail;
3162 }
24a28e42
RS
3163
3164 /* Setup PLL clock to 48MHz */
3165 retval = clk_enable(udc->usb_pll_clk);
3166 if (retval < 0) {
3167 dev_err(udc->dev, "failed to start USB PLL\n");
3168 goto pll_enable_fail;
3169 }
3170
3171 retval = clk_set_rate(udc->usb_pll_clk, 48000);
3172 if (retval < 0) {
3173 dev_err(udc->dev, "failed to set USB clock rate\n");
3174 goto pll_set_fail;
3175 }
3176
3177 writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL);
3178
3179 /* Enable USB device clock */
3180 retval = clk_enable(udc->usb_slv_clk);
3181 if (retval < 0) {
3182 dev_err(udc->dev, "failed to start USB device clock\n");
3183 goto usb_clk_enable_fail;
3184 }
3185
50856699
APS
3186 /* Enable USB OTG clock */
3187 retval = clk_enable(udc->usb_otg_clk);
3188 if (retval < 0) {
3189 dev_err(udc->dev, "failed to start USB otg clock\n");
3190 goto usb_otg_clk_enable_fail;
3191 }
24a28e42
RS
3192
3193 /* Setup deferred workqueue data */
3194 udc->poweron = udc->pullup = 0;
3195 INIT_WORK(&udc->pullup_job, pullup_work);
3196 INIT_WORK(&udc->vbus_job, vbus_work);
3197#ifdef CONFIG_PM
3198 INIT_WORK(&udc->power_job, power_work);
3199#endif
3200
3201 /* All clocks are now on */
3202 udc->clocked = 1;
3203
3204 isp1301_udc_configure(udc);
3205 /* Allocate memory for the UDCA */
3206 udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE,
3207 &dma_handle,
3208 (GFP_KERNEL | GFP_DMA));
3209 if (!udc->udca_v_base) {
3210 dev_err(udc->dev, "error getting UDCA region\n");
3211 retval = -ENOMEM;
3212 goto i2c_fail;
3213 }
3214 udc->udca_p_base = dma_handle;
3215 dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n",
3216 UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base);
3217
3218 /* Setup the DD DMA memory pool */
3219 udc->dd_cache = dma_pool_create("udc_dd", udc->dev,
3220 sizeof(struct lpc32xx_usbd_dd_gad),
3221 sizeof(u32), 0);
3222 if (!udc->dd_cache) {
3223 dev_err(udc->dev, "error getting DD DMA region\n");
3224 retval = -ENOMEM;
3225 goto dma_alloc_fail;
3226 }
3227
3228 /* Clear USB peripheral and initialize gadget endpoints */
3229 udc_disable(udc);
3230 udc_reinit(udc);
3231
24a28e42
RS
3232 /* Request IRQs - low and high priority USB device IRQs are routed to
3233 * the same handler, while the DMA interrupt is routed elsewhere */
3234 retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq,
3235 0, "udc_lp", udc);
3236 if (retval < 0) {
3237 dev_err(udc->dev, "LP request irq %d failed\n",
3238 udc->udp_irq[IRQ_USB_LP]);
3239 goto irq_lp_fail;
3240 }
3241 retval = request_irq(udc->udp_irq[IRQ_USB_HP], lpc32xx_usb_hp_irq,
3242 0, "udc_hp", udc);
3243 if (retval < 0) {
3244 dev_err(udc->dev, "HP request irq %d failed\n",
3245 udc->udp_irq[IRQ_USB_HP]);
3246 goto irq_hp_fail;
3247 }
3248
3249 retval = request_irq(udc->udp_irq[IRQ_USB_DEVDMA],
3250 lpc32xx_usb_devdma_irq, 0, "udc_dma", udc);
3251 if (retval < 0) {
3252 dev_err(udc->dev, "DEV request irq %d failed\n",
3253 udc->udp_irq[IRQ_USB_DEVDMA]);
3254 goto irq_dev_fail;
3255 }
3256
3257 /* The transceiver interrupt is used for VBUS detection and will
3258 kick off the VBUS handler function */
3259 retval = request_irq(udc->udp_irq[IRQ_USB_ATX], lpc32xx_usb_vbus_irq,
3260 0, "udc_otg", udc);
3261 if (retval < 0) {
3262 dev_err(udc->dev, "VBUS request irq %d failed\n",
3263 udc->udp_irq[IRQ_USB_ATX]);
3264 goto irq_xcvr_fail;
3265 }
3266
3267 /* Initialize wait queue */
3268 init_waitqueue_head(&udc->ep_disable_wait_queue);
3269 atomic_set(&udc->enabled_ep_cnt, 0);
3270
3271 /* Keep all IRQs disabled until GadgetFS starts up */
3272 for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
3273 disable_irq(udc->udp_irq[i]);
3274
3275 retval = usb_add_gadget_udc(dev, &udc->gadget);
3276 if (retval < 0)
3277 goto add_gadget_fail;
3278
3279 dev_set_drvdata(dev, udc);
3280 device_init_wakeup(dev, 1);
3281 create_debug_file(udc);
3282
3283 /* Disable clocks for now */
3284 udc_clk_set(udc, 0);
3285
3286 dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION);
3287 return 0;
3288
3289add_gadget_fail:
3290 free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
3291irq_xcvr_fail:
3292 free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
3293irq_dev_fail:
3294 free_irq(udc->udp_irq[IRQ_USB_HP], udc);
3295irq_hp_fail:
3296 free_irq(udc->udp_irq[IRQ_USB_LP], udc);
3297irq_lp_fail:
24a28e42
RS
3298 dma_pool_destroy(udc->dd_cache);
3299dma_alloc_fail:
3300 dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
3301 udc->udca_v_base, udc->udca_p_base);
3302i2c_fail:
50856699
APS
3303 clk_disable(udc->usb_otg_clk);
3304usb_otg_clk_enable_fail:
24a28e42
RS
3305 clk_disable(udc->usb_slv_clk);
3306usb_clk_enable_fail:
3307pll_set_fail:
3308 clk_disable(udc->usb_pll_clk);
3309pll_enable_fail:
50856699 3310 clk_put(udc->usb_otg_clk);
ade79d13
FB
3311usb_otg_clk_get_fail:
3312 clk_put(udc->usb_slv_clk);
24a28e42
RS
3313usb_clk_get_fail:
3314 clk_put(udc->usb_pll_clk);
3315pll_get_fail:
3316 iounmap(udc->udp_baseaddr);
3317io_map_fail:
3318 release_mem_region(udc->io_p_start, udc->io_p_size);
3319 dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
c4846a18
RS
3320request_mem_region_fail:
3321irq_fail:
3322resource_fail:
3323phy_fail:
3324 kfree(udc);
24a28e42
RS
3325 return retval;
3326}
3327
fb4e98ab 3328static int lpc32xx_udc_remove(struct platform_device *pdev)
24a28e42
RS
3329{
3330 struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
3331
3332 usb_del_gadget_udc(&udc->gadget);
3333 if (udc->driver)
3334 return -EBUSY;
3335
3336 udc_clk_set(udc, 1);
3337 udc_disable(udc);
3338 pullup(udc, 0);
3339
3340 free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
3341
3342 device_init_wakeup(&pdev->dev, 0);
3343 remove_debug_file(udc);
3344
3345 dma_pool_destroy(udc->dd_cache);
3346 dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
3347 udc->udca_v_base, udc->udca_p_base);
3348 free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
3349 free_irq(udc->udp_irq[IRQ_USB_HP], udc);
3350 free_irq(udc->udp_irq[IRQ_USB_LP], udc);
3351
50856699
APS
3352 clk_disable(udc->usb_otg_clk);
3353 clk_put(udc->usb_otg_clk);
24a28e42
RS
3354 clk_disable(udc->usb_slv_clk);
3355 clk_put(udc->usb_slv_clk);
3356 clk_disable(udc->usb_pll_clk);
3357 clk_put(udc->usb_pll_clk);
3358 iounmap(udc->udp_baseaddr);
3359 release_mem_region(udc->io_p_start, udc->io_p_size);
c4846a18 3360 kfree(udc);
24a28e42
RS
3361
3362 return 0;
3363}
3364
3365#ifdef CONFIG_PM
3366static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
3367{
24a28e42
RS
3368 struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
3369
3370 if (udc->clocked) {
3371 /* Power down ISP */
3372 udc->poweron = 0;
3373 isp1301_set_powerstate(udc, 0);
3374
3375 /* Disable clocking */
3376 udc_clk_set(udc, 0);
3377
3378 /* Keep clock flag on, so we know to re-enable clocks
3379 on resume */
3380 udc->clocked = 1;
3381
24a28e42
RS
3382 /* Kill global USB clock */
3383 clk_disable(udc->usb_slv_clk);
3384 }
3385
3386 return 0;
3387}
3388
3389static int lpc32xx_udc_resume(struct platform_device *pdev)
3390{
3391 struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
3392
3393 if (udc->clocked) {
3394 /* Enable global USB clock */
3395 clk_enable(udc->usb_slv_clk);
3396
3397 /* Enable clocking */
3398 udc_clk_set(udc, 1);
3399
3400 /* ISP back to normal power mode */
3401 udc->poweron = 1;
3402 isp1301_set_powerstate(udc, 1);
3403 }
3404
3405 return 0;
3406}
3407#else
3408#define lpc32xx_udc_suspend NULL
3409#define lpc32xx_udc_resume NULL
3410#endif
3411
3412#ifdef CONFIG_OF
ca118b78 3413static const struct of_device_id lpc32xx_udc_of_match[] = {
24a28e42
RS
3414 { .compatible = "nxp,lpc3220-udc", },
3415 { },
3416};
3417MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match);
3418#endif
3419
3420static struct platform_driver lpc32xx_udc_driver = {
7690417d 3421 .remove = lpc32xx_udc_remove,
24a28e42
RS
3422 .shutdown = lpc32xx_udc_shutdown,
3423 .suspend = lpc32xx_udc_suspend,
3424 .resume = lpc32xx_udc_resume,
3425 .driver = {
3426 .name = (char *) driver_name,
24a28e42
RS
3427 .of_match_table = of_match_ptr(lpc32xx_udc_of_match),
3428 },
3429};
3430
52f7a82b 3431module_platform_driver_probe(lpc32xx_udc_driver, lpc32xx_udc_probe);
24a28e42
RS
3432
3433MODULE_DESCRIPTION("LPC32XX udc driver");
3434MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
3435MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
3436MODULE_LICENSE("GPL");
3437MODULE_ALIAS("platform:lpc32xx_udc");