]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Host Controller Drivers | |
3 | # | |
4 | comment "USB Host Controller Drivers" | |
5 | depends on USB | |
6 | ||
e9b29ffc PK |
7 | config USB_C67X00_HCD |
8 | tristate "Cypress C67x00 HCD support" | |
9 | depends on USB | |
10 | help | |
11 | The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role | |
12 | host/peripheral/OTG USB controllers. | |
13 | ||
14 | Enable this option to support this chip in host controller mode. | |
15 | If unsure, say N. | |
16 | ||
17 | To compile this driver as a module, choose M here: the | |
18 | module will be called c67x00. | |
19 | ||
eb6bab13 SS |
20 | config USB_XHCI_HCD |
21 | tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" | |
7b720009 | 22 | depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL |
eb6bab13 SS |
23 | ---help--- |
24 | The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 | |
25 | "SuperSpeed" host controller hardware. | |
26 | ||
27 | To compile this driver as a module, choose M here: the | |
28 | module will be called xhci-hcd. | |
29 | ||
3429e91a SAS |
30 | config USB_XHCI_PLATFORM |
31 | tristate | |
32 | depends on USB_XHCI_HCD | |
33 | ||
eb6bab13 SS |
34 | config USB_XHCI_HCD_DEBUGGING |
35 | bool "Debugging for the xHCI host controller" | |
36 | depends on USB_XHCI_HCD | |
37 | ---help--- | |
38 | Say 'Y' to turn on debugging for the xHCI host controller driver. | |
39 | This will spew debugging output, even in interrupt context. | |
40 | This should only be used for debugging xHCI driver bugs. | |
41 | ||
42 | If unsure, say N. | |
43 | ||
1da177e4 LT |
44 | config USB_EHCI_HCD |
45 | tristate "EHCI HCD (USB 2.0) support" | |
76fa9a24 | 46 | depends on USB && USB_ARCH_HAS_EHCI |
1da177e4 LT |
47 | ---help--- |
48 | The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 | |
49 | "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. | |
50 | If your USB host controller supports USB 2.0, you will likely want to | |
b967c88e | 51 | configure this Host Controller Driver. |
1da177e4 LT |
52 | |
53 | EHCI controllers are packaged with "companion" host controllers (OHCI | |
54 | or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports | |
b3c29d85 | 55 | will connect to EHCI if the device is high speed, otherwise they |
1da177e4 LT |
56 | connect to a companion controller. If you configure EHCI, you should |
57 | probably configure the OHCI (for NEC and some other vendors) USB Host | |
58 | Controller Driver or UHCI (for Via motherboards) Host Controller | |
59 | Driver too. | |
60 | ||
61 | You may want to read <file:Documentation/usb/ehci.txt>. | |
62 | ||
63 | To compile this driver as a module, choose M here: the | |
64 | module will be called ehci-hcd. | |
65 | ||
1da177e4 | 66 | config USB_EHCI_ROOT_HUB_TT |
9ec249a6 RD |
67 | bool "Root Hub Transaction Translators" |
68 | depends on USB_EHCI_HCD | |
1da177e4 LT |
69 | ---help--- |
70 | Some EHCI chips have vendor-specific extensions to integrate | |
71 | transaction translators, so that no OHCI or UHCI companion | |
72 | controller is needed. It's safe to say "y" even if your | |
73 | controller doesn't support this feature. | |
74 | ||
ba47f66b DS |
75 | This supports the EHCI implementation that's originally |
76 | from ARC, and has since changed hands a few times. | |
77 | ||
78 | config USB_EHCI_TT_NEWSCHED | |
37cd681c AS |
79 | bool "Improved Transaction Translator scheduling" |
80 | depends on USB_EHCI_HCD | |
81 | default y | |
ba47f66b DS |
82 | ---help--- |
83 | This changes the periodic scheduling code to fill more of the low | |
84 | and full speed bandwidth available from the Transaction Translator | |
85 | (TT) in USB 2.0 hubs. Without this, only one transfer will be | |
86 | issued in each microframe, significantly reducing the number of | |
87 | periodic low/fullspeed transfers possible. | |
88 | ||
89 | If you have multiple periodic low/fullspeed devices connected to a | |
90 | highspeed USB hub which is connected to a highspeed USB Host | |
91 | Controller, and some of those devices will not work correctly | |
37cd681c AS |
92 | (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if |
93 | you have only one such device and it doesn't work, you could try | |
94 | saying N. | |
ba47f66b | 95 | |
37cd681c | 96 | If unsure, say Y. |
1da177e4 | 97 | |
22ced687 A |
98 | config USB_EHCI_HCD_PMC_MSP |
99 | tristate "EHCI support for on-chip PMC MSP71xx USB controller" | |
100 | depends on USB_EHCI_HCD && MSP_HAS_USB | |
101 | default n | |
102 | select USB_EHCI_BIG_ENDIAN_DESC | |
103 | select USB_EHCI_BIG_ENDIAN_MMIO | |
104 | ---help--- | |
105 | Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. | |
106 | If unsure, say N. | |
107 | ||
083522d7 BH |
108 | config USB_EHCI_BIG_ENDIAN_MMIO |
109 | bool | |
1643accd DD |
110 | depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ |
111 | ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ | |
22ced687 | 112 | PPC_MPC512x || CPU_CAVIUM_OCTEON || \ |
9be03929 | 113 | PMC_MSP || SPARC_LEON) |
4d68c0be | 114 | default y |
083522d7 | 115 | |
6dbd682b SR |
116 | config USB_EHCI_BIG_ENDIAN_DESC |
117 | bool | |
230f7ede | 118 | depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ |
9be03929 | 119 | PPC_MPC512x || PMC_MSP || SPARC_LEON) |
4d68c0be | 120 | default y |
6dbd682b | 121 | |
08d3c18e JZ |
122 | config XPS_USB_HCD_XILINX |
123 | bool "Use Xilinx usb host EHCI controller core" | |
124 | depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) | |
125 | select USB_EHCI_BIG_ENDIAN_DESC | |
126 | select USB_EHCI_BIG_ENDIAN_MMIO | |
127 | ---help--- | |
128 | Xilinx xps USB host controller core is EHCI compilant and has | |
129 | transaction translator built-in. It can be configured to either | |
130 | support both high speed and full speed devices, or high speed | |
131 | devices only. | |
132 | ||
126512e3 AG |
133 | config USB_FSL_MPH_DR_OF |
134 | tristate | |
135 | ||
ba02978a | 136 | config USB_EHCI_FSL |
c0ca9bc5 | 137 | bool "Support for Freescale PPC on-chip EHCI USB controller" |
b5937a41 | 138 | depends on USB_EHCI_HCD && FSL_SOC |
ba02978a | 139 | select USB_EHCI_ROOT_HUB_TT |
018b97d0 | 140 | select USB_FSL_MPH_DR_OF if OF |
7e8d5cd9 DM |
141 | ---help--- |
142 | Variation of ARC USB block used in some Freescale chips. | |
143 | ||
144 | config USB_EHCI_MXC | |
c0ca9bc5 | 145 | bool "Support for Freescale i.MX on-chip EHCI USB controller" |
7e8d5cd9 DM |
146 | depends on USB_EHCI_HCD && ARCH_MXC |
147 | select USB_EHCI_ROOT_HUB_TT | |
ba02978a LY |
148 | ---help--- |
149 | Variation of ARC USB block used in some Freescale chips. | |
150 | ||
7f124f4b KM |
151 | config USB_EHCI_HCD_OMAP |
152 | bool "EHCI support for OMAP3 and later chips" | |
153 | depends on USB_EHCI_HCD && ARCH_OMAP | |
154 | default y | |
155 | --- help --- | |
156 | Enables support for the on-chip EHCI controller on | |
157 | OMAP3 and later chips. | |
158 | ||
b0848aea PK |
159 | config USB_EHCI_MSM |
160 | bool "Support for MSM on-chip EHCI USB controller" | |
161 | depends on USB_EHCI_HCD && ARCH_MSM | |
162 | select USB_EHCI_ROOT_HUB_TT | |
dfb2130c | 163 | select USB_MSM_OTG |
b0848aea PK |
164 | ---help--- |
165 | Enables support for the USB Host controller present on the | |
166 | Qualcomm chipsets. Root Hub has inbuilt TT. | |
167 | This driver depends on OTG driver for PHY initialization, | |
8bb6a164 | 168 | clock management, powering up VBUS, and power management. |
8cf28f1f PK |
169 | This driver is not supported on boards like trout which |
170 | has an external PHY. | |
b0848aea | 171 | |
79ad3b5a BG |
172 | config USB_EHCI_TEGRA |
173 | boolean "NVIDIA Tegra HCD support" | |
174 | depends on USB_EHCI_HCD && ARCH_TEGRA | |
175 | select USB_EHCI_ROOT_HUB_TT | |
176 | help | |
177 | This driver enables support for the internal USB Host Controllers | |
178 | found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. | |
179 | ||
da0e8fb0 VB |
180 | config USB_EHCI_HCD_PPC_OF |
181 | bool "EHCI support for PPC USB controller on OF platform bus" | |
182 | depends on USB_EHCI_HCD && PPC_OF | |
183 | default y | |
184 | ---help--- | |
185 | Enables support for the USB controller present on the PowerPC | |
186 | OpenFirmware platform bus. | |
187 | ||
60b0bf0f YS |
188 | config USB_EHCI_SH |
189 | bool "EHCI support for SuperH USB controller" | |
190 | depends on USB_EHCI_HCD && SUPERH | |
191 | ---help--- | |
192 | Enables support for the on-chip EHCI controller on the SuperH. | |
193 | If you use the PCI EHCI controller, this option is not necessary. | |
194 | ||
1bcc5aa8 JS |
195 | config USB_EHCI_S5P |
196 | boolean "S5P EHCI support" | |
197 | depends on USB_EHCI_HCD && PLAT_S5P | |
198 | help | |
199 | Enable support for the S5P SOC's on-chip EHCI controller. | |
200 | ||
3a082ec9 NZ |
201 | config USB_EHCI_MV |
202 | bool "EHCI support for Marvell on-chip controller" | |
a219b666 | 203 | depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) |
3a082ec9 NZ |
204 | select USB_EHCI_ROOT_HUB_TT |
205 | ---help--- | |
206 | Enables support for Marvell (including PXA and MMP series) on-chip | |
207 | USB SPH and OTG controller. SPH is a single port host, and it can | |
208 | only be EHCI host. OTG is controller that can switch to host mode. | |
209 | ||
586dfc8c WZ |
210 | config USB_W90X900_EHCI |
211 | bool "W90X900(W90P910) EHCI support" | |
212 | depends on USB_EHCI_HCD && ARCH_W90X900 | |
213 | ---help--- | |
214 | Enables support for the W90X900 USB controller | |
215 | ||
760efe69 ML |
216 | config USB_CNS3XXX_EHCI |
217 | bool "Cavium CNS3XXX EHCI Module" | |
218 | depends on USB_EHCI_HCD && ARCH_CNS3XXX | |
219 | ---help--- | |
220 | Enable support for the CNS3XXX SOC's on-chip EHCI controller. | |
221 | It is needed for high-speed (480Mbit/sec) USB 2.0 device | |
222 | support. | |
223 | ||
502fa841 | 224 | config USB_EHCI_ATH79 |
5d98cd4e | 225 | bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" |
9d6b204f | 226 | depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) |
502fa841 | 227 | select USB_EHCI_ROOT_HUB_TT |
5d98cd4e | 228 | select USB_EHCI_HCD_PLATFORM |
502fa841 GJ |
229 | default y |
230 | ---help--- | |
5d98cd4e HM |
231 | This option is deprecated now and the driver was removed, use |
232 | USB_EHCI_HCD_PLATFORM instead. | |
233 | ||
502fa841 GJ |
234 | Enables support for the built-in EHCI controller present |
235 | on the Atheros AR7XXX/AR9XXX SoCs. | |
236 | ||
b92a78e5 RG |
237 | config USB_OXU210HP_HCD |
238 | tristate "OXU210HP HCD support" | |
239 | depends on USB | |
240 | ---help--- | |
241 | The OXU210HP is an USB host/OTG/device controller. Enable this | |
242 | option if your board has this chip. If unsure, say N. | |
243 | ||
244 | This driver does not support isochronous transfers and doesn't | |
245 | implement OTG nor USB device controllers. | |
246 | ||
247 | To compile this driver as a module, choose M here: the | |
248 | module will be called oxu210hp-hcd. | |
249 | ||
4808a1c0 OK |
250 | config USB_ISP116X_HCD |
251 | tristate "ISP116X HCD support" | |
252 | depends on USB | |
4808a1c0 OK |
253 | ---help--- |
254 | The ISP1160 and ISP1161 chips are USB host controllers. Enable this | |
255 | option if your board has this chip. If unsure, say N. | |
256 | ||
257 | This driver does not support isochronous transfers. | |
258 | ||
259 | To compile this driver as a module, choose M here: the | |
260 | module will be called isp116x-hcd. | |
261 | ||
db11e47d SS |
262 | config USB_ISP1760_HCD |
263 | tristate "ISP 1760 HCD support" | |
f7e7aa58 | 264 | depends on USB && EXPERIMENTAL |
db11e47d SS |
265 | ---help--- |
266 | The ISP1760 chip is a USB 2.0 host controller. | |
267 | ||
268 | This driver does not support isochronous transfers or OTG. | |
ff30bf1c SAS |
269 | This USB controller is usually attached to a non-DMA-Master |
270 | capable bus. NXP's eval kit brings this chip on PCI card | |
271 | where the chip itself is behind a PLB to simulate such | |
272 | a bus. | |
db11e47d SS |
273 | |
274 | To compile this driver as a module, choose M here: the | |
ff30bf1c | 275 | module will be called isp1760. |
db11e47d | 276 | |
a9d43091 LW |
277 | config USB_ISP1362_HCD |
278 | tristate "ISP1362 HCD support" | |
279 | depends on USB | |
280 | default N | |
281 | ---help--- | |
282 | Supports the Philips ISP1362 chip as a host controller | |
283 | ||
284 | This driver does not support isochronous transfers. | |
285 | ||
286 | To compile this driver as a module, choose M here: the | |
287 | module will be called isp1362-hcd. | |
288 | ||
1da177e4 LT |
289 | config USB_OHCI_HCD |
290 | tristate "OHCI HCD support" | |
291 | depends on USB && USB_ARCH_HAS_OHCI | |
292 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
2bf5fa13 | 293 | select USB_OTG_UTILS if ARCH_OMAP |
1da177e4 LT |
294 | ---help--- |
295 | The Open Host Controller Interface (OHCI) is a standard for accessing | |
296 | USB 1.1 host controller hardware. It does more in hardware than Intel's | |
297 | UHCI specification. If your USB host controller follows the OHCI spec, | |
298 | say Y. On most non-x86 systems, and on x86 hardware that's not using a | |
299 | USB controller from Intel or VIA, this is appropriate. If your host | |
300 | controller doesn't use PCI, this is probably appropriate. For a PCI | |
301 | based system where you're not sure, the "lspci -v" entry will list the | |
302 | right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. | |
303 | ||
304 | To compile this driver as a module, choose M here: the | |
305 | module will be called ohci-hcd. | |
306 | ||
968b448b AG |
307 | config USB_OHCI_HCD_OMAP1 |
308 | bool "OHCI support for OMAP1/2 chips" | |
309 | depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2) | |
310 | default y | |
311 | ---help--- | |
312 | Enables support for the OHCI controller on OMAP1/2 chips. | |
313 | ||
314 | config USB_OHCI_HCD_OMAP3 | |
315 | bool "OHCI support for OMAP3 and later chips" | |
316 | depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4) | |
317 | default y | |
318 | ---help--- | |
319 | Enables support for the on-chip OHCI controller on | |
320 | OMAP3 and later chips. | |
321 | ||
90e6ca5c | 322 | config USB_OHCI_ATH79 |
5d98cd4e | 323 | bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" |
90e6ca5c | 324 | depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) |
5d98cd4e | 325 | select USB_OHCI_HCD_PLATFORM |
90e6ca5c GJ |
326 | default y |
327 | help | |
5d98cd4e HM |
328 | This option is deprecated now and the driver was removed, use |
329 | USB_OHCI_HCD_PLATFORM instead. | |
330 | ||
90e6ca5c GJ |
331 | Enables support for the built-in OHCI controller present on the |
332 | Atheros AR71XX/AR7240 SoCs. | |
333 | ||
1da177e4 LT |
334 | config USB_OHCI_HCD_PPC_SOC |
335 | bool "OHCI support for on-chip PPC USB controller" | |
336 | depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) | |
337 | default y | |
11d1a4aa BH |
338 | select USB_OHCI_BIG_ENDIAN_DESC |
339 | select USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
340 | ---help--- |
341 | Enables support for the USB controller on the MPC52xx or | |
342 | STB03xxx processor chip. If unsure, say Y. | |
343 | ||
495a678f | 344 | config USB_OHCI_HCD_PPC_OF_BE |
45e83889 AB |
345 | bool "OHCI support for OF platform bus (big endian)" |
346 | depends on USB_OHCI_HCD && PPC_OF | |
495a678f SM |
347 | select USB_OHCI_BIG_ENDIAN_DESC |
348 | select USB_OHCI_BIG_ENDIAN_MMIO | |
45e83889 AB |
349 | ---help--- |
350 | Enables support for big-endian USB controllers present on the | |
351 | OpenFirmware platform bus. | |
495a678f SM |
352 | |
353 | config USB_OHCI_HCD_PPC_OF_LE | |
45e83889 AB |
354 | bool "OHCI support for OF platform bus (little endian)" |
355 | depends on USB_OHCI_HCD && PPC_OF | |
495a678f | 356 | select USB_OHCI_LITTLE_ENDIAN |
45e83889 AB |
357 | ---help--- |
358 | Enables support for little-endian USB controllers present on the | |
359 | OpenFirmware platform bus. | |
360 | ||
361 | config USB_OHCI_HCD_PPC_OF | |
362 | bool | |
363 | depends on USB_OHCI_HCD && PPC_OF | |
364 | default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE | |
495a678f | 365 | |
1da177e4 LT |
366 | config USB_OHCI_HCD_PCI |
367 | bool "OHCI support for PCI-bus USB controllers" | |
495a678f | 368 | depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) |
1da177e4 LT |
369 | default y |
370 | select USB_OHCI_LITTLE_ENDIAN | |
371 | ---help--- | |
372 | Enables support for PCI-bus plug-in USB controller cards. | |
373 | If unsure, say Y. | |
374 | ||
c604e851 | 375 | config USB_OHCI_HCD_SSB |
259b83a3 | 376 | bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" |
1011b326 | 377 | depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL |
259b83a3 HM |
378 | select USB_HCD_SSB |
379 | select USB_OHCI_HCD_PLATFORM | |
c604e851 MB |
380 | default n |
381 | ---help--- | |
259b83a3 HM |
382 | This option is deprecated now and the driver was removed, use |
383 | USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. | |
384 | ||
c604e851 MB |
385 | Support for the Sonics Silicon Backplane (SSB) attached |
386 | Broadcom USB OHCI core. | |
387 | ||
388 | This device is present in some embedded devices with | |
389 | Broadcom based SSB bus. | |
390 | ||
391 | If unsure, say N. | |
392 | ||
60b0bf0f YS |
393 | config USB_OHCI_SH |
394 | bool "OHCI support for SuperH USB controller" | |
395 | depends on USB_OHCI_HCD && SUPERH | |
396 | ---help--- | |
397 | Enables support for the on-chip OHCI controller on the SuperH. | |
398 | If you use the PCI OHCI controller, this option is not necessary. | |
399 | ||
62194244 JH |
400 | config USB_OHCI_EXYNOS |
401 | boolean "OHCI support for Samsung EXYNOS SoC Series" | |
402 | depends on USB_OHCI_HCD && ARCH_EXYNOS | |
403 | help | |
404 | Enable support for the Samsung Exynos SOC's on-chip OHCI controller. | |
405 | ||
760efe69 ML |
406 | config USB_CNS3XXX_OHCI |
407 | bool "Cavium CNS3XXX OHCI Module" | |
408 | depends on USB_OHCI_HCD && ARCH_CNS3XXX | |
409 | ---help--- | |
410 | Enable support for the CNS3XXX SOC's on-chip OHCI controller. | |
411 | It is needed for low-speed USB 1.0 device support. | |
412 | ||
fa3364b5 HM |
413 | config USB_OHCI_HCD_PLATFORM |
414 | bool "Generic OHCI driver for a platform device" | |
415 | depends on USB_OHCI_HCD && EXPERIMENTAL | |
416 | default n | |
417 | ---help--- | |
418 | Adds an OHCI host driver for a generic platform device, which | |
419 | provieds a memory space and an irq. | |
420 | ||
421 | If unsure, say N. | |
422 | ||
7a7a4a59 HM |
423 | config USB_EHCI_HCD_PLATFORM |
424 | bool "Generic EHCI driver for a platform device" | |
425 | depends on USB_EHCI_HCD && EXPERIMENTAL | |
426 | default n | |
427 | ---help--- | |
428 | Adds an EHCI host driver for a generic platform device, which | |
429 | provieds a memory space and an irq. | |
430 | ||
431 | If unsure, say N. | |
432 | ||
11d1a4aa BH |
433 | config USB_OHCI_BIG_ENDIAN_DESC |
434 | bool | |
435 | depends on USB_OHCI_HCD | |
436 | default n | |
437 | ||
438 | config USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
439 | bool |
440 | depends on USB_OHCI_HCD | |
441 | default n | |
442 | ||
443 | config USB_OHCI_LITTLE_ENDIAN | |
444 | bool | |
445 | depends on USB_OHCI_HCD | |
446 | default n if STB03xxx || PPC_MPC52xx | |
447 | default y | |
448 | ||
449 | config USB_UHCI_HCD | |
450 | tristate "UHCI HCD (most Intel and VIA) support" | |
3db7739c | 451 | depends on USB && (PCI || SPARC_LEON) |
1da177e4 LT |
452 | ---help--- |
453 | The Universal Host Controller Interface is a standard by Intel for | |
454 | accessing the USB hardware in the PC (which is also called the USB | |
455 | host controller). If your USB host controller conforms to this | |
456 | standard, you may want to say Y, but see below. All recent boards | |
457 | with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, | |
458 | i810, i820) conform to this standard. Also all VIA PCI chipsets | |
459 | (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro | |
3db7739c JA |
460 | 133) and LEON/GRLIB SoCs with the GRUSBHC controller. |
461 | If unsure, say Y. | |
1da177e4 LT |
462 | |
463 | To compile this driver as a module, choose M here: the | |
464 | module will be called uhci-hcd. | |
465 | ||
d3219d1c JA |
466 | config USB_UHCI_SUPPORT_NON_PCI_HC |
467 | bool | |
468 | depends on USB_UHCI_HCD | |
3db7739c | 469 | default y if SPARC_LEON |
d3219d1c | 470 | |
8452c674 | 471 | config USB_UHCI_BIG_ENDIAN_MMIO |
51e2f62f | 472 | bool |
fda928ac JA |
473 | depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON |
474 | default y | |
51e2f62f JA |
475 | |
476 | config USB_UHCI_BIG_ENDIAN_DESC | |
8452c674 | 477 | bool |
fda928ac JA |
478 | depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON |
479 | default y | |
8452c674 | 480 | |
236dd4d1 AV |
481 | config USB_FHCI_HCD |
482 | tristate "Freescale QE USB Host Controller support" | |
483 | depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE | |
484 | select FSL_GTM | |
485 | select QE_USB | |
486 | help | |
487 | This driver enables support for Freescale QE USB Host Controller | |
488 | (as found on MPC8360 and MPC8323 processors), the driver supports | |
489 | Full and Low Speed USB. | |
490 | ||
491 | config FHCI_DEBUG | |
492 | bool "Freescale QE USB Host Controller debug support" | |
493 | depends on USB_FHCI_HCD && DEBUG_FS | |
494 | help | |
495 | Say "y" to see some FHCI debug information and statistics | |
25985edc | 496 | through debugfs. |
236dd4d1 | 497 | |
d774efea TO |
498 | config USB_U132_HCD |
499 | tristate "Elan U132 Adapter Host Controller" | |
500 | depends on USB && USB_FTDI_ELAN | |
501 | default M | |
502 | help | |
503 | The U132 adapter is a USB to CardBus adapter specifically designed | |
504 | for PC cards that contain an OHCI host controller. Typical PC cards | |
505 | are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 | |
506 | adapter will *NOT* work with PC cards that do not contain an OHCI | |
507 | controller. | |
508 | ||
3cb2fccc | 509 | For those PC cards that contain multiple OHCI controllers only the |
d774efea TO |
510 | first one is used. |
511 | ||
512 | The driver consists of two modules, the "ftdi-elan" module is a | |
513 | USB client driver that interfaces to the FTDI chip within ELAN's | |
514 | USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host | |
515 | controller driver that talks to the OHCI controller within the | |
516 | CardBus cards that are inserted in the U132 adapter. | |
517 | ||
518 | This driver has been tested with a CardBus OHCI USB adapter, and | |
519 | worked with a USB PEN Drive inserted into the first USB port of | |
520 | the PCCARD. A rather pointless thing to do, but useful for testing. | |
521 | ||
522 | It is safe to say M here. | |
523 | ||
524 | See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> | |
525 | ||
1da177e4 LT |
526 | config USB_SL811_HCD |
527 | tristate "SL811HS HCD support" | |
528 | depends on USB | |
1da177e4 LT |
529 | help |
530 | The SL811HS is a single-port USB controller that supports either | |
531 | host side or peripheral side roles. Enable this option if your | |
532 | board has this chip, and you want to use it as a host controller. | |
533 | If unsure, say N. | |
534 | ||
535 | To compile this driver as a module, choose M here: the | |
536 | module will be called sl811-hcd. | |
537 | ||
ad7c56f0 MF |
538 | config USB_SL811_HCD_ISO |
539 | bool "partial ISO support" | |
540 | depends on USB_SL811_HCD | |
541 | help | |
542 | The driver doesn't support iso_frame_desc (yet), but for some simple | |
543 | devices that just queue one ISO frame per URB, then ISO transfers | |
544 | "should" work using the normal urb status fields. | |
545 | ||
546 | If unsure, say N. | |
547 | ||
c6de2b64 DB |
548 | config USB_SL811_CS |
549 | tristate "CF/PCMCIA support for SL811HS HCD" | |
550 | depends on USB_SL811_HCD && PCMCIA | |
c6de2b64 DB |
551 | help |
552 | Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC | |
553 | REX-CFU1U CF card (often used with PDAs). If unsure, say N. | |
554 | ||
555 | To compile this driver as a module, choose M here: the | |
556 | module will be called "sl811_cs". | |
557 | ||
5d304358 | 558 | config USB_R8A66597_HCD |
fa0de2b6 | 559 | tristate "R8A66597 HCD support" |
5d304358 YS |
560 | depends on USB |
561 | help | |
562 | The R8A66597 is a USB 2.0 host and peripheral controller. | |
563 | ||
564 | Enable this option if your board has this chip, and you want | |
565 | to use it as a host controller. If unsure, say N. | |
566 | ||
567 | To compile this driver as a module, choose M here: the | |
568 | module will be called r8a66597-hcd. | |
569 | ||
034d7c13 KM |
570 | config USB_RENESAS_USBHS_HCD |
571 | tristate "Renesas USBHS HCD support" | |
572 | depends on USB | |
573 | depends on USB_RENESAS_USBHS | |
574 | help | |
575 | The Renesas USBHS is a USB 2.0 host and peripheral controller. | |
576 | ||
577 | Enable this option if your board has this chip, and you want | |
578 | to use it as a host controller. If unsure, say N. | |
579 | ||
580 | To compile this driver as a module, choose M here: the | |
581 | module will be called renesas-usbhs. | |
582 | ||
7e6133aa | 583 | config USB_WHCI_HCD |
6a7c3e46 DV |
584 | tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" |
585 | depends on EXPERIMENTAL | |
36f8ecbf | 586 | depends on PCI && USB && UWB |
7e6133aa DV |
587 | select USB_WUSB |
588 | select UWB_WHCI | |
589 | help | |
590 | A driver for PCI-based Wireless USB Host Controllers that are | |
591 | compliant with the WHCI specification. | |
592 | ||
593 | To compile this driver a module, choose M here: the module | |
594 | will be called "whci-hcd". | |
d09318b8 IPG |
595 | |
596 | config USB_HWA_HCD | |
6a7c3e46 DV |
597 | tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" |
598 | depends on EXPERIMENTAL | |
36f8ecbf | 599 | depends on USB && UWB |
d09318b8 IPG |
600 | select USB_WUSB |
601 | select UWB_HWA | |
602 | help | |
603 | This driver enables you to connect Wireless USB devices to | |
604 | your system using a Host Wire Adaptor USB dongle. This is an | |
605 | UWB Radio Controller and WUSB Host Controller connected to | |
606 | your machine via USB (specified in WUSB1.0). | |
607 | ||
608 | To compile this driver a module, choose M here: the module | |
609 | will be called "hwa-hc". | |
23d3e7a6 MF |
610 | |
611 | config USB_IMX21_HCD | |
5de9ec4d SH |
612 | tristate "i.MX21 HCD support" |
613 | depends on USB && ARM && ARCH_MXC | |
23d3e7a6 MF |
614 | help |
615 | This driver enables support for the on-chip USB host in the | |
5de9ec4d | 616 | i.MX21 processor. |
23d3e7a6 MF |
617 | |
618 | To compile this driver as a module, choose M here: the | |
619 | module will be called "imx21-hcd". | |
620 | ||
1643accd DD |
621 | config USB_OCTEON_EHCI |
622 | bool "Octeon on-chip EHCI support" | |
623 | depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON | |
624 | default n | |
625 | select USB_EHCI_BIG_ENDIAN_MMIO | |
626 | help | |
627 | Enable support for the Octeon II SOC's on-chip EHCI | |
628 | controller. It is needed for high-speed (480Mbit/sec) | |
629 | USB 2.0 device support. All CN6XXX based chips with USB are | |
630 | supported. | |
631 | ||
632 | config USB_OCTEON_OHCI | |
633 | bool "Octeon on-chip OHCI support" | |
634 | depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON | |
635 | default USB_OCTEON_EHCI | |
636 | select USB_OHCI_BIG_ENDIAN_MMIO | |
637 | select USB_OHCI_LITTLE_ENDIAN | |
638 | help | |
639 | Enable support for the Octeon II SOC's on-chip OHCI | |
640 | controller. It is needed for low-speed USB 1.0 device | |
641 | support. All CN6XXX based chips with USB are supported. | |
642 | ||
643 | config USB_OCTEON2_COMMON | |
644 | bool | |
645 | default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI | |
62e11d1b HM |
646 | |
647 | config USB_HCD_BCMA | |
648 | tristate "BCMA usb host driver" | |
649 | depends on BCMA && EXPERIMENTAL | |
650 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD | |
651 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
652 | help | |
653 | Enbale support for the EHCI and OCHI host controller on an bcma bus. | |
654 | It converts the bcma driver into two platform device drivers | |
655 | for ehci and ohci. | |
656 | ||
657 | If unsure, say N. | |
7043c2cc HM |
658 | |
659 | config USB_HCD_SSB | |
660 | tristate "SSB usb host driver" | |
661 | depends on SSB && EXPERIMENTAL | |
662 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD | |
663 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
664 | help | |
665 | Enbale support for the EHCI and OCHI host controller on an bcma bus. | |
666 | It converts the bcma driver into two platform device drivers | |
667 | for ehci and ohci. | |
668 | ||
669 | If unsure, say N. |