]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Host Controller Drivers | |
3 | # | |
4 | comment "USB Host Controller Drivers" | |
1da177e4 | 5 | |
e9b29ffc PK |
6 | config USB_C67X00_HCD |
7 | tristate "Cypress C67x00 HCD support" | |
e9b29ffc PK |
8 | help |
9 | The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role | |
10 | host/peripheral/OTG USB controllers. | |
11 | ||
12 | Enable this option to support this chip in host controller mode. | |
13 | If unsure, say N. | |
14 | ||
15 | To compile this driver as a module, choose M here: the | |
16 | module will be called c67x00. | |
17 | ||
eb6bab13 | 18 | config USB_XHCI_HCD |
eb83be98 | 19 | tristate "xHCI HCD (USB 3.0) support" |
eb6bab13 SS |
20 | ---help--- |
21 | The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 | |
22 | "SuperSpeed" host controller hardware. | |
23 | ||
24 | To compile this driver as a module, choose M here: the | |
25 | module will be called xhci-hcd. | |
26 | ||
0fcb9989 FF |
27 | if USB_XHCI_HCD |
28 | ||
3429e91a SAS |
29 | config USB_XHCI_PLATFORM |
30 | tristate | |
3429e91a | 31 | |
0fcb9989 FF |
32 | endif # USB_XHCI_HCD |
33 | ||
1da177e4 LT |
34 | config USB_EHCI_HCD |
35 | tristate "EHCI HCD (USB 2.0) support" | |
1da177e4 LT |
36 | ---help--- |
37 | The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 | |
38 | "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. | |
39 | If your USB host controller supports USB 2.0, you will likely want to | |
b967c88e | 40 | configure this Host Controller Driver. |
1da177e4 LT |
41 | |
42 | EHCI controllers are packaged with "companion" host controllers (OHCI | |
43 | or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports | |
b3c29d85 | 44 | will connect to EHCI if the device is high speed, otherwise they |
1da177e4 LT |
45 | connect to a companion controller. If you configure EHCI, you should |
46 | probably configure the OHCI (for NEC and some other vendors) USB Host | |
47 | Controller Driver or UHCI (for Via motherboards) Host Controller | |
48 | Driver too. | |
49 | ||
50 | You may want to read <file:Documentation/usb/ehci.txt>. | |
51 | ||
52 | To compile this driver as a module, choose M here: the | |
53 | module will be called ehci-hcd. | |
54 | ||
1da177e4 | 55 | config USB_EHCI_ROOT_HUB_TT |
9ec249a6 | 56 | bool "Root Hub Transaction Translators" |
a746c286 | 57 | depends on USB_EHCI_HCD |
1da177e4 LT |
58 | ---help--- |
59 | Some EHCI chips have vendor-specific extensions to integrate | |
60 | transaction translators, so that no OHCI or UHCI companion | |
61 | controller is needed. It's safe to say "y" even if your | |
62 | controller doesn't support this feature. | |
63 | ||
ba47f66b DS |
64 | This supports the EHCI implementation that's originally |
65 | from ARC, and has since changed hands a few times. | |
66 | ||
67 | config USB_EHCI_TT_NEWSCHED | |
37cd681c | 68 | bool "Improved Transaction Translator scheduling" |
a746c286 | 69 | depends on USB_EHCI_HCD |
37cd681c | 70 | default y |
ba47f66b DS |
71 | ---help--- |
72 | This changes the periodic scheduling code to fill more of the low | |
73 | and full speed bandwidth available from the Transaction Translator | |
74 | (TT) in USB 2.0 hubs. Without this, only one transfer will be | |
75 | issued in each microframe, significantly reducing the number of | |
76 | periodic low/fullspeed transfers possible. | |
77 | ||
78 | If you have multiple periodic low/fullspeed devices connected to a | |
79 | highspeed USB hub which is connected to a highspeed USB Host | |
80 | Controller, and some of those devices will not work correctly | |
37cd681c AS |
81 | (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if |
82 | you have only one such device and it doesn't work, you could try | |
83 | saying N. | |
ba47f66b | 84 | |
37cd681c | 85 | If unsure, say Y. |
1da177e4 | 86 | |
42443dc4 FF |
87 | config USB_FSL_MPH_DR_OF |
88 | tristate | |
89 | ||
90 | if USB_EHCI_HCD | |
91 | ||
adfa79d1 AS |
92 | config USB_EHCI_PCI |
93 | tristate | |
42443dc4 | 94 | depends on PCI |
adfa79d1 AS |
95 | default y |
96 | ||
22ced687 A |
97 | config USB_EHCI_HCD_PMC_MSP |
98 | tristate "EHCI support for on-chip PMC MSP71xx USB controller" | |
42443dc4 | 99 | depends on MSP_HAS_USB |
22ced687 A |
100 | default n |
101 | select USB_EHCI_BIG_ENDIAN_DESC | |
102 | select USB_EHCI_BIG_ENDIAN_MMIO | |
103 | ---help--- | |
104 | Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. | |
105 | If unsure, say N. | |
106 | ||
08d3c18e JZ |
107 | config XPS_USB_HCD_XILINX |
108 | bool "Use Xilinx usb host EHCI controller core" | |
42443dc4 | 109 | depends on (PPC32 || MICROBLAZE) |
08d3c18e JZ |
110 | select USB_EHCI_BIG_ENDIAN_DESC |
111 | select USB_EHCI_BIG_ENDIAN_MMIO | |
112 | ---help--- | |
113 | Xilinx xps USB host controller core is EHCI compilant and has | |
114 | transaction translator built-in. It can be configured to either | |
115 | support both high speed and full speed devices, or high speed | |
116 | devices only. | |
117 | ||
ba02978a | 118 | config USB_EHCI_FSL |
c0ca9bc5 | 119 | bool "Support for Freescale PPC on-chip EHCI USB controller" |
42443dc4 | 120 | depends on FSL_SOC |
ba02978a | 121 | select USB_EHCI_ROOT_HUB_TT |
018b97d0 | 122 | select USB_FSL_MPH_DR_OF if OF |
7e8d5cd9 DM |
123 | ---help--- |
124 | Variation of ARC USB block used in some Freescale chips. | |
125 | ||
126 | config USB_EHCI_MXC | |
dba63b2f | 127 | tristate "Support for Freescale i.MX on-chip EHCI USB controller" |
42443dc4 | 128 | depends on ARCH_MXC |
7e8d5cd9 | 129 | select USB_EHCI_ROOT_HUB_TT |
ba02978a LY |
130 | ---help--- |
131 | Variation of ARC USB block used in some Freescale chips. | |
132 | ||
7f124f4b | 133 | config USB_EHCI_HCD_OMAP |
54a41966 | 134 | tristate "EHCI support for OMAP3 and later chips" |
42443dc4 | 135 | depends on ARCH_OMAP |
88650d62 | 136 | select NOP_USB_XCEIV |
7f124f4b | 137 | default y |
d132d7f6 | 138 | ---help--- |
7f124f4b KM |
139 | Enables support for the on-chip EHCI controller on |
140 | OMAP3 and later chips. | |
141 | ||
a76dd463 MG |
142 | config USB_EHCI_HCD_ORION |
143 | tristate "Support for Marvell EBU on-chip EHCI USB controller" | |
144 | depends on USB_EHCI_HCD && PLAT_ORION | |
145 | default y | |
146 | ---help--- | |
147 | Enables support for the on-chip EHCI controller on Marvell's | |
148 | embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, | |
149 | Armada 370. This is different from the EHCI implementation | |
150 | on Marvell's mobile PXA and MMP SoC, see "EHCI support for | |
151 | Marvell PXA/MMP USB controller" for those. | |
152 | ||
7675d6ba MG |
153 | config USB_EHCI_HCD_SPEAR |
154 | tristate "Support for ST SPEAr on-chip EHCI USB controller" | |
155 | depends on USB_EHCI_HCD && PLAT_SPEAR | |
156 | default y | |
157 | ---help--- | |
158 | Enables support for the on-chip EHCI controller on | |
159 | ST SPEAr chips. | |
160 | ||
97736961 MG |
161 | config USB_EHCI_HCD_AT91 |
162 | tristate "Support for Atmel on-chip EHCI USB controller" | |
163 | depends on USB_EHCI_HCD && ARCH_AT91 | |
164 | default y | |
165 | ---help--- | |
166 | Enables support for the on-chip EHCI controller on | |
167 | Atmel chips. | |
168 | ||
b0848aea | 169 | config USB_EHCI_MSM |
8c68e84f | 170 | tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" |
42443dc4 | 171 | depends on ARCH_MSM |
b0848aea | 172 | select USB_EHCI_ROOT_HUB_TT |
dfb2130c | 173 | select USB_MSM_OTG |
b0848aea PK |
174 | ---help--- |
175 | Enables support for the USB Host controller present on the | |
176 | Qualcomm chipsets. Root Hub has inbuilt TT. | |
177 | This driver depends on OTG driver for PHY initialization, | |
8bb6a164 | 178 | clock management, powering up VBUS, and power management. |
8cf28f1f PK |
179 | This driver is not supported on boards like trout which |
180 | has an external PHY. | |
b0848aea | 181 | |
79ad3b5a | 182 | config USB_EHCI_TEGRA |
9fc5f24e | 183 | tristate "NVIDIA Tegra HCD support" |
42443dc4 | 184 | depends on ARCH_TEGRA |
79ad3b5a | 185 | select USB_EHCI_ROOT_HUB_TT |
75f32ec1 | 186 | select USB_PHY |
79ad3b5a BG |
187 | help |
188 | This driver enables support for the internal USB Host Controllers | |
189 | found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. | |
190 | ||
da0e8fb0 VB |
191 | config USB_EHCI_HCD_PPC_OF |
192 | bool "EHCI support for PPC USB controller on OF platform bus" | |
42443dc4 | 193 | depends on PPC_OF |
da0e8fb0 VB |
194 | default y |
195 | ---help--- | |
196 | Enables support for the USB controller present on the PowerPC | |
197 | OpenFirmware platform bus. | |
198 | ||
60b0bf0f YS |
199 | config USB_EHCI_SH |
200 | bool "EHCI support for SuperH USB controller" | |
42443dc4 | 201 | depends on SUPERH |
60b0bf0f YS |
202 | ---help--- |
203 | Enables support for the on-chip EHCI controller on the SuperH. | |
204 | If you use the PCI EHCI controller, this option is not necessary. | |
205 | ||
1bcc5aa8 | 206 | config USB_EHCI_S5P |
7edb3daf | 207 | tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" |
58d5b720 | 208 | depends on PLAT_S5P || ARCH_EXYNOS |
e9a92b2b | 209 | help |
7edb3daf MG |
210 | Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's |
211 | on-chip EHCI controller. | |
1bcc5aa8 | 212 | |
3a082ec9 | 213 | config USB_EHCI_MV |
a76dd463 | 214 | bool "EHCI support for Marvell PXA/MMP USB controller" |
42443dc4 | 215 | depends on (ARCH_PXA || ARCH_MMP) |
3a082ec9 NZ |
216 | select USB_EHCI_ROOT_HUB_TT |
217 | ---help--- | |
218 | Enables support for Marvell (including PXA and MMP series) on-chip | |
219 | USB SPH and OTG controller. SPH is a single port host, and it can | |
220 | only be EHCI host. OTG is controller that can switch to host mode. | |
a76dd463 MG |
221 | Note that this driver will not work on Marvell's other EHCI |
222 | controller used by the EBU-type SoCs including Orion, Kirkwood, | |
223 | Dova, Armada 370 and Armada XP. See "Support for Marvell EBU | |
224 | on-chip EHCI USB controller" for those. | |
3a082ec9 | 225 | |
586dfc8c | 226 | config USB_W90X900_EHCI |
a60f4f81 | 227 | tristate "W90X900(W90P910) EHCI support" |
42443dc4 | 228 | depends on ARCH_W90X900 |
586dfc8c WZ |
229 | ---help--- |
230 | Enables support for the W90X900 USB controller | |
231 | ||
760efe69 | 232 | config USB_CNS3XXX_EHCI |
f3a958d3 | 233 | bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" |
42443dc4 | 234 | depends on ARCH_CNS3XXX |
f3a958d3 | 235 | select USB_EHCI_HCD_PLATFORM |
760efe69 | 236 | ---help--- |
f3a958d3 FF |
237 | This option is deprecated now and the driver was removed, use |
238 | USB_EHCI_HCD_PLATFORM instead. | |
239 | ||
760efe69 ML |
240 | Enable support for the CNS3XXX SOC's on-chip EHCI controller. |
241 | It is needed for high-speed (480Mbit/sec) USB 2.0 device | |
242 | support. | |
243 | ||
502fa841 | 244 | config USB_EHCI_ATH79 |
5d98cd4e | 245 | bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" |
42443dc4 | 246 | depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) |
502fa841 | 247 | select USB_EHCI_ROOT_HUB_TT |
5d98cd4e | 248 | select USB_EHCI_HCD_PLATFORM |
502fa841 GJ |
249 | default y |
250 | ---help--- | |
5d98cd4e HM |
251 | This option is deprecated now and the driver was removed, use |
252 | USB_EHCI_HCD_PLATFORM instead. | |
253 | ||
502fa841 GJ |
254 | Enables support for the built-in EHCI controller present |
255 | on the Atheros AR7XXX/AR9XXX SoCs. | |
256 | ||
42443dc4 FF |
257 | config USB_EHCI_HCD_PLATFORM |
258 | tristate "Generic EHCI driver for a platform device" | |
259 | default n | |
260 | ---help--- | |
261 | Adds an EHCI host driver for a generic platform device, which | |
262 | provides a memory space and an irq. | |
263 | ||
264 | If unsure, say N. | |
265 | ||
266 | config USB_OCTEON_EHCI | |
267 | bool "Octeon on-chip EHCI support" | |
9ddebc46 | 268 | depends on CAVIUM_OCTEON_SOC |
42443dc4 FF |
269 | default n |
270 | select USB_EHCI_BIG_ENDIAN_MMIO | |
271 | help | |
272 | Enable support for the Octeon II SOC's on-chip EHCI | |
273 | controller. It is needed for high-speed (480Mbit/sec) | |
274 | USB 2.0 device support. All CN6XXX based chips with USB are | |
275 | supported. | |
276 | ||
277 | endif # USB_EHCI_HCD | |
278 | ||
b92a78e5 RG |
279 | config USB_OXU210HP_HCD |
280 | tristate "OXU210HP HCD support" | |
b92a78e5 RG |
281 | ---help--- |
282 | The OXU210HP is an USB host/OTG/device controller. Enable this | |
283 | option if your board has this chip. If unsure, say N. | |
284 | ||
285 | This driver does not support isochronous transfers and doesn't | |
286 | implement OTG nor USB device controllers. | |
287 | ||
288 | To compile this driver as a module, choose M here: the | |
289 | module will be called oxu210hp-hcd. | |
290 | ||
4808a1c0 OK |
291 | config USB_ISP116X_HCD |
292 | tristate "ISP116X HCD support" | |
4808a1c0 OK |
293 | ---help--- |
294 | The ISP1160 and ISP1161 chips are USB host controllers. Enable this | |
295 | option if your board has this chip. If unsure, say N. | |
296 | ||
297 | This driver does not support isochronous transfers. | |
298 | ||
299 | To compile this driver as a module, choose M here: the | |
300 | module will be called isp116x-hcd. | |
301 | ||
db11e47d SS |
302 | config USB_ISP1760_HCD |
303 | tristate "ISP 1760 HCD support" | |
db11e47d SS |
304 | ---help--- |
305 | The ISP1760 chip is a USB 2.0 host controller. | |
306 | ||
307 | This driver does not support isochronous transfers or OTG. | |
ff30bf1c SAS |
308 | This USB controller is usually attached to a non-DMA-Master |
309 | capable bus. NXP's eval kit brings this chip on PCI card | |
310 | where the chip itself is behind a PLB to simulate such | |
311 | a bus. | |
db11e47d SS |
312 | |
313 | To compile this driver as a module, choose M here: the | |
ff30bf1c | 314 | module will be called isp1760. |
db11e47d | 315 | |
a9d43091 LW |
316 | config USB_ISP1362_HCD |
317 | tristate "ISP1362 HCD support" | |
a9d43091 LW |
318 | default N |
319 | ---help--- | |
320 | Supports the Philips ISP1362 chip as a host controller | |
321 | ||
322 | This driver does not support isochronous transfers. | |
323 | ||
324 | To compile this driver as a module, choose M here: the | |
325 | module will be called isp1362-hcd. | |
326 | ||
6c920bfb YHC |
327 | config USB_FUSBH200_HCD |
328 | tristate "FUSBH200 HCD support" | |
329 | depends on USB | |
330 | default N | |
331 | ---help--- | |
332 | Faraday FUSBH200 is designed to meet USB2.0 EHCI specification | |
333 | with minor modification. | |
334 | ||
335 | To compile this driver as a module, choose M here: the | |
336 | module will be called fusbh200-hcd. | |
337 | ||
7d50195f FHC |
338 | config USB_FOTG210_HCD |
339 | tristate "FOTG210 HCD support" | |
340 | depends on USB | |
341 | default N | |
342 | ---help--- | |
343 | Faraday FOTG210 is an OTG controller which can be configured as | |
344 | an USB2.0 host. It is designed to meet USB2.0 EHCI specification | |
345 | with minor modification. | |
346 | ||
347 | To compile this driver as a module, choose M here: the | |
348 | module will be called fotg210-hcd. | |
349 | ||
1da177e4 | 350 | config USB_OHCI_HCD |
c1117afb | 351 | tristate "OHCI HCD (USB 1.1) support" |
1da177e4 | 352 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 |
61464c83 | 353 | depends on USB_ISP1301 || !ARCH_LPC32XX |
1da177e4 LT |
354 | ---help--- |
355 | The Open Host Controller Interface (OHCI) is a standard for accessing | |
356 | USB 1.1 host controller hardware. It does more in hardware than Intel's | |
357 | UHCI specification. If your USB host controller follows the OHCI spec, | |
358 | say Y. On most non-x86 systems, and on x86 hardware that's not using a | |
359 | USB controller from Intel or VIA, this is appropriate. If your host | |
360 | controller doesn't use PCI, this is probably appropriate. For a PCI | |
361 | based system where you're not sure, the "lspci -v" entry will list the | |
362 | right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. | |
363 | ||
364 | To compile this driver as a module, choose M here: the | |
365 | module will be called ohci-hcd. | |
366 | ||
3ad3ca05 FF |
367 | if USB_OHCI_HCD |
368 | ||
968b448b | 369 | config USB_OHCI_HCD_OMAP1 |
de57a154 | 370 | tristate "OHCI support for OMAP1/2 chips" |
3ad3ca05 | 371 | depends on ARCH_OMAP1 |
968b448b AG |
372 | default y |
373 | ---help--- | |
374 | Enables support for the OHCI controller on OMAP1/2 chips. | |
375 | ||
1cc6ac59 MG |
376 | config USB_OHCI_HCD_SPEAR |
377 | tristate "Support for ST SPEAr on-chip OHCI USB controller" | |
378 | depends on USB_OHCI_HCD && PLAT_SPEAR | |
379 | default y | |
380 | ---help--- | |
381 | Enables support for the on-chip OHCI controller on | |
382 | ST SPEAr chips. | |
383 | ||
f23b71f3 MG |
384 | config USB_OHCI_HCD_S3C2410 |
385 | tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" | |
386 | depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) | |
387 | default y | |
388 | ---help--- | |
389 | Enables support for the on-chip OHCI controller on | |
390 | S3C24xx/S3C64xx chips. | |
391 | ||
30330b8f MG |
392 | config USB_OHCI_HCD_LPC32XX |
393 | tristate "Support for LPC on-chip OHCI USB controller" | |
394 | depends on USB_OHCI_HCD && ARCH_LPC32XX | |
395 | default y | |
396 | ---help--- | |
397 | Enables support for the on-chip OHCI controller on | |
398 | NXP chips. | |
399 | ||
e2404434 MG |
400 | config USB_OHCI_HCD_EP93XX |
401 | tristate "Support for EP93XX on-chip OHCI USB controller" | |
402 | depends on USB_OHCI_HCD && ARCH_EP93XX | |
403 | default y | |
404 | ---help--- | |
405 | Enables support for the on-chip OHCI controller on | |
406 | EP93XX chips. | |
407 | ||
b8ad5c37 MG |
408 | config USB_OHCI_HCD_PXA27X |
409 | tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" | |
410 | depends on USB_OHCI_HCD && (PXA27x || PXA3xx) | |
411 | default y | |
412 | ---help--- | |
413 | Enables support for the on-chip OHCI controller on | |
414 | PXA27x/PXA3xx chips. | |
415 | ||
e3825b48 MG |
416 | config USB_OHCI_HCD_AT91 |
417 | tristate "Support for Atmel on-chip OHCI USB controller" | |
418 | depends on USB_OHCI_HCD && ARCH_AT91 | |
419 | default y | |
420 | ---help--- | |
421 | Enables support for the on-chip OHCI controller on | |
422 | Atmel chips. | |
423 | ||
968b448b | 424 | config USB_OHCI_HCD_OMAP3 |
3a48fef1 | 425 | tristate "OHCI support for OMAP3 and later chips" |
3ad3ca05 | 426 | depends on (ARCH_OMAP3 || ARCH_OMAP4) |
968b448b AG |
427 | default y |
428 | ---help--- | |
429 | Enables support for the on-chip OHCI controller on | |
430 | OMAP3 and later chips. | |
431 | ||
90e6ca5c | 432 | config USB_OHCI_ATH79 |
5d98cd4e | 433 | bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" |
3ad3ca05 | 434 | depends on (SOC_AR71XX || SOC_AR724X) |
5d98cd4e | 435 | select USB_OHCI_HCD_PLATFORM |
90e6ca5c GJ |
436 | default y |
437 | help | |
5d98cd4e HM |
438 | This option is deprecated now and the driver was removed, use |
439 | USB_OHCI_HCD_PLATFORM instead. | |
440 | ||
90e6ca5c GJ |
441 | Enables support for the built-in OHCI controller present on the |
442 | Atheros AR71XX/AR7240 SoCs. | |
443 | ||
495a678f | 444 | config USB_OHCI_HCD_PPC_OF_BE |
45e83889 | 445 | bool "OHCI support for OF platform bus (big endian)" |
3ad3ca05 | 446 | depends on PPC_OF |
495a678f SM |
447 | select USB_OHCI_BIG_ENDIAN_DESC |
448 | select USB_OHCI_BIG_ENDIAN_MMIO | |
45e83889 AB |
449 | ---help--- |
450 | Enables support for big-endian USB controllers present on the | |
451 | OpenFirmware platform bus. | |
495a678f SM |
452 | |
453 | config USB_OHCI_HCD_PPC_OF_LE | |
45e83889 | 454 | bool "OHCI support for OF platform bus (little endian)" |
3ad3ca05 | 455 | depends on PPC_OF |
495a678f | 456 | select USB_OHCI_LITTLE_ENDIAN |
45e83889 AB |
457 | ---help--- |
458 | Enables support for little-endian USB controllers present on the | |
459 | OpenFirmware platform bus. | |
460 | ||
461 | config USB_OHCI_HCD_PPC_OF | |
462 | bool | |
3ad3ca05 | 463 | depends on PPC_OF |
45e83889 | 464 | default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE |
495a678f | 465 | |
1da177e4 | 466 | config USB_OHCI_HCD_PCI |
c1117afb MG |
467 | tristate "OHCI support for PCI-bus USB controllers" |
468 | depends on PCI | |
1da177e4 LT |
469 | default y |
470 | select USB_OHCI_LITTLE_ENDIAN | |
471 | ---help--- | |
472 | Enables support for PCI-bus plug-in USB controller cards. | |
473 | If unsure, say Y. | |
474 | ||
c604e851 | 475 | config USB_OHCI_HCD_SSB |
259b83a3 | 476 | bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" |
3ad3ca05 | 477 | depends on (SSB = y || SSB = USB_OHCI_HCD) |
259b83a3 HM |
478 | select USB_HCD_SSB |
479 | select USB_OHCI_HCD_PLATFORM | |
c604e851 MB |
480 | default n |
481 | ---help--- | |
259b83a3 HM |
482 | This option is deprecated now and the driver was removed, use |
483 | USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. | |
484 | ||
c604e851 MB |
485 | Support for the Sonics Silicon Backplane (SSB) attached |
486 | Broadcom USB OHCI core. | |
487 | ||
488 | This device is present in some embedded devices with | |
489 | Broadcom based SSB bus. | |
490 | ||
491 | If unsure, say N. | |
492 | ||
60b0bf0f | 493 | config USB_OHCI_SH |
231a72e0 | 494 | bool "OHCI support for SuperH USB controller (DEPRECATED)" |
3ad3ca05 | 495 | depends on SUPERH |
231a72e0 | 496 | select USB_OHCI_HCD_PLATFORM |
60b0bf0f | 497 | ---help--- |
231a72e0 FF |
498 | This option is deprecated now and the driver was removed, use |
499 | USB_OHCI_HCD_PLATFORM instead. | |
500 | ||
60b0bf0f YS |
501 | Enables support for the on-chip OHCI controller on the SuperH. |
502 | If you use the PCI OHCI controller, this option is not necessary. | |
503 | ||
62194244 | 504 | config USB_OHCI_EXYNOS |
50a97e05 MG |
505 | tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" |
506 | depends on PLAT_S5P || ARCH_EXYNOS | |
62194244 JH |
507 | help |
508 | Enable support for the Samsung Exynos SOC's on-chip OHCI controller. | |
509 | ||
760efe69 | 510 | config USB_CNS3XXX_OHCI |
c23920b0 | 511 | bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" |
3ad3ca05 | 512 | depends on ARCH_CNS3XXX |
c23920b0 | 513 | select USB_OHCI_HCD_PLATFORM |
760efe69 | 514 | ---help--- |
c23920b0 FF |
515 | This option is deprecated now and the driver was removed, use |
516 | USB_OHCI_HCD_PLATFORM instead. | |
517 | ||
760efe69 ML |
518 | Enable support for the CNS3XXX SOC's on-chip OHCI controller. |
519 | It is needed for low-speed USB 1.0 device support. | |
520 | ||
fa3364b5 | 521 | config USB_OHCI_HCD_PLATFORM |
928fb68e | 522 | tristate "Generic OHCI driver for a platform device" |
fa3364b5 HM |
523 | default n |
524 | ---help--- | |
525 | Adds an OHCI host driver for a generic platform device, which | |
898d828b | 526 | provides a memory space and an irq. |
fa3364b5 HM |
527 | |
528 | If unsure, say N. | |
529 | ||
3ad3ca05 FF |
530 | config USB_OCTEON_OHCI |
531 | bool "Octeon on-chip OHCI support" | |
9ddebc46 | 532 | depends on CAVIUM_OCTEON_SOC |
3ad3ca05 FF |
533 | default USB_OCTEON_EHCI |
534 | select USB_OHCI_BIG_ENDIAN_MMIO | |
535 | select USB_OHCI_LITTLE_ENDIAN | |
536 | help | |
537 | Enable support for the Octeon II SOC's on-chip OHCI | |
538 | controller. It is needed for low-speed USB 1.0 device | |
539 | support. All CN6XXX based chips with USB are supported. | |
540 | ||
3ad3ca05 FF |
541 | endif # USB_OHCI_HCD |
542 | ||
1da177e4 LT |
543 | config USB_UHCI_HCD |
544 | tristate "UHCI HCD (most Intel and VIA) support" | |
ccd9509a | 545 | depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC |
1da177e4 LT |
546 | ---help--- |
547 | The Universal Host Controller Interface is a standard by Intel for | |
548 | accessing the USB hardware in the PC (which is also called the USB | |
549 | host controller). If your USB host controller conforms to this | |
550 | standard, you may want to say Y, but see below. All recent boards | |
551 | with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, | |
552 | i810, i820) conform to this standard. Also all VIA PCI chipsets | |
553 | (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro | |
3db7739c JA |
554 | 133) and LEON/GRLIB SoCs with the GRUSBHC controller. |
555 | If unsure, say Y. | |
1da177e4 LT |
556 | |
557 | To compile this driver as a module, choose M here: the | |
558 | module will be called uhci-hcd. | |
559 | ||
d3219d1c JA |
560 | config USB_UHCI_SUPPORT_NON_PCI_HC |
561 | bool | |
ccd9509a | 562 | default y if (SPARC_LEON || USB_UHCI_PLATFORM) |
100d4597 TP |
563 | |
564 | config USB_UHCI_PLATFORM | |
ccd9509a | 565 | bool |
100d4597 | 566 | default y if ARCH_VT8500 |
d3219d1c | 567 | |
8452c674 | 568 | config USB_UHCI_BIG_ENDIAN_MMIO |
51e2f62f | 569 | bool |
ccd9509a | 570 | default y if SPARC_LEON |
51e2f62f JA |
571 | |
572 | config USB_UHCI_BIG_ENDIAN_DESC | |
8452c674 | 573 | bool |
ccd9509a | 574 | default y if SPARC_LEON |
8452c674 | 575 | |
236dd4d1 AV |
576 | config USB_FHCI_HCD |
577 | tristate "Freescale QE USB Host Controller support" | |
25e11ec4 | 578 | depends on OF_GPIO && QE_GPIO && QUICC_ENGINE |
236dd4d1 AV |
579 | select FSL_GTM |
580 | select QE_USB | |
581 | help | |
582 | This driver enables support for Freescale QE USB Host Controller | |
583 | (as found on MPC8360 and MPC8323 processors), the driver supports | |
584 | Full and Low Speed USB. | |
585 | ||
586 | config FHCI_DEBUG | |
587 | bool "Freescale QE USB Host Controller debug support" | |
588 | depends on USB_FHCI_HCD && DEBUG_FS | |
589 | help | |
590 | Say "y" to see some FHCI debug information and statistics | |
25985edc | 591 | through debugfs. |
236dd4d1 | 592 | |
d774efea TO |
593 | config USB_U132_HCD |
594 | tristate "Elan U132 Adapter Host Controller" | |
25e11ec4 | 595 | depends on USB_FTDI_ELAN |
d774efea TO |
596 | default M |
597 | help | |
598 | The U132 adapter is a USB to CardBus adapter specifically designed | |
599 | for PC cards that contain an OHCI host controller. Typical PC cards | |
600 | are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 | |
601 | adapter will *NOT* work with PC cards that do not contain an OHCI | |
602 | controller. | |
603 | ||
3cb2fccc | 604 | For those PC cards that contain multiple OHCI controllers only the |
d774efea TO |
605 | first one is used. |
606 | ||
607 | The driver consists of two modules, the "ftdi-elan" module is a | |
608 | USB client driver that interfaces to the FTDI chip within ELAN's | |
609 | USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host | |
610 | controller driver that talks to the OHCI controller within the | |
611 | CardBus cards that are inserted in the U132 adapter. | |
612 | ||
613 | This driver has been tested with a CardBus OHCI USB adapter, and | |
614 | worked with a USB PEN Drive inserted into the first USB port of | |
615 | the PCCARD. A rather pointless thing to do, but useful for testing. | |
616 | ||
617 | It is safe to say M here. | |
618 | ||
619 | See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> | |
620 | ||
1da177e4 LT |
621 | config USB_SL811_HCD |
622 | tristate "SL811HS HCD support" | |
1da177e4 LT |
623 | help |
624 | The SL811HS is a single-port USB controller that supports either | |
625 | host side or peripheral side roles. Enable this option if your | |
626 | board has this chip, and you want to use it as a host controller. | |
627 | If unsure, say N. | |
628 | ||
629 | To compile this driver as a module, choose M here: the | |
630 | module will be called sl811-hcd. | |
631 | ||
ad7c56f0 MF |
632 | config USB_SL811_HCD_ISO |
633 | bool "partial ISO support" | |
634 | depends on USB_SL811_HCD | |
635 | help | |
636 | The driver doesn't support iso_frame_desc (yet), but for some simple | |
637 | devices that just queue one ISO frame per URB, then ISO transfers | |
638 | "should" work using the normal urb status fields. | |
639 | ||
640 | If unsure, say N. | |
641 | ||
c6de2b64 DB |
642 | config USB_SL811_CS |
643 | tristate "CF/PCMCIA support for SL811HS HCD" | |
644 | depends on USB_SL811_HCD && PCMCIA | |
c6de2b64 DB |
645 | help |
646 | Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC | |
647 | REX-CFU1U CF card (often used with PDAs). If unsure, say N. | |
648 | ||
649 | To compile this driver as a module, choose M here: the | |
650 | module will be called "sl811_cs". | |
651 | ||
5d304358 | 652 | config USB_R8A66597_HCD |
fa0de2b6 | 653 | tristate "R8A66597 HCD support" |
5d304358 YS |
654 | help |
655 | The R8A66597 is a USB 2.0 host and peripheral controller. | |
656 | ||
657 | Enable this option if your board has this chip, and you want | |
658 | to use it as a host controller. If unsure, say N. | |
659 | ||
660 | To compile this driver as a module, choose M here: the | |
661 | module will be called r8a66597-hcd. | |
662 | ||
034d7c13 KM |
663 | config USB_RENESAS_USBHS_HCD |
664 | tristate "Renesas USBHS HCD support" | |
034d7c13 KM |
665 | depends on USB_RENESAS_USBHS |
666 | help | |
667 | The Renesas USBHS is a USB 2.0 host and peripheral controller. | |
668 | ||
669 | Enable this option if your board has this chip, and you want | |
670 | to use it as a host controller. If unsure, say N. | |
671 | ||
672 | To compile this driver as a module, choose M here: the | |
673 | module will be called renesas-usbhs. | |
674 | ||
7e6133aa | 675 | config USB_WHCI_HCD |
eb83be98 | 676 | tristate "Wireless USB Host Controller Interface (WHCI) driver" |
36f8ecbf | 677 | depends on PCI && USB && UWB |
7e6133aa DV |
678 | select USB_WUSB |
679 | select UWB_WHCI | |
680 | help | |
681 | A driver for PCI-based Wireless USB Host Controllers that are | |
682 | compliant with the WHCI specification. | |
683 | ||
684 | To compile this driver a module, choose M here: the module | |
685 | will be called "whci-hcd". | |
d09318b8 IPG |
686 | |
687 | config USB_HWA_HCD | |
eb83be98 | 688 | tristate "Host Wire Adapter (HWA) driver" |
25e11ec4 | 689 | depends on UWB |
d09318b8 IPG |
690 | select USB_WUSB |
691 | select UWB_HWA | |
692 | help | |
693 | This driver enables you to connect Wireless USB devices to | |
694 | your system using a Host Wire Adaptor USB dongle. This is an | |
695 | UWB Radio Controller and WUSB Host Controller connected to | |
696 | your machine via USB (specified in WUSB1.0). | |
697 | ||
698 | To compile this driver a module, choose M here: the module | |
699 | will be called "hwa-hc". | |
23d3e7a6 MF |
700 | |
701 | config USB_IMX21_HCD | |
5de9ec4d | 702 | tristate "i.MX21 HCD support" |
25e11ec4 | 703 | depends on ARM && ARCH_MXC |
23d3e7a6 MF |
704 | help |
705 | This driver enables support for the on-chip USB host in the | |
5de9ec4d | 706 | i.MX21 processor. |
23d3e7a6 MF |
707 | |
708 | To compile this driver as a module, choose M here: the | |
709 | module will be called "imx21-hcd". | |
710 | ||
1643accd | 711 | |
1643accd DD |
712 | |
713 | config USB_OCTEON2_COMMON | |
714 | bool | |
715 | default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI | |
62e11d1b HM |
716 | |
717 | config USB_HCD_BCMA | |
718 | tristate "BCMA usb host driver" | |
eb83be98 | 719 | depends on BCMA |
62e11d1b HM |
720 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD |
721 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
722 | help | |
71c421db | 723 | Enable support for the EHCI and OCHI host controller on an bcma bus. |
62e11d1b HM |
724 | It converts the bcma driver into two platform device drivers |
725 | for ehci and ohci. | |
726 | ||
727 | If unsure, say N. | |
7043c2cc HM |
728 | |
729 | config USB_HCD_SSB | |
730 | tristate "SSB usb host driver" | |
eb83be98 | 731 | depends on SSB |
7043c2cc HM |
732 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD |
733 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
734 | help | |
71c421db | 735 | Enable support for the EHCI and OCHI host controller on an bcma bus. |
7043c2cc HM |
736 | It converts the bcma driver into two platform device drivers |
737 | for ehci and ohci. | |
738 | ||
739 | If unsure, say N. | |
726a85ca JP |
740 | |
741 | config USB_HCD_TEST_MODE | |
742 | bool "HCD test mode support" | |
743 | ---help--- | |
744 | Say 'Y' to enable additional software test modes that may be | |
745 | supported by the host controller drivers. | |
746 | ||
747 | One such test mode is the Embedded High-speed Host Electrical Test | |
748 | (EHSET) for EHCI host controller hardware, specifically the "Single | |
749 | Step Set Feature" test. Typically this will be enabled for On-the-Go | |
750 | or embedded hosts that need to undergo USB-IF compliance testing with | |
751 | the aid of special testing hardware. In the future, this may expand | |
752 | to include other tests that require support from a HCD driver. | |
753 | ||
754 | This option is of interest only to developers who need to validate | |
755 | their USB hardware designs. It is not needed for normal use. If | |
756 | unsure, say N. |